Skip to Content

Changes for page 12 PLC Protocol OLD

Last modified by Mora Zhou on 2024/12/05 14:53
From version 77.1
edited by Ben
on 2022/08/29 14:19
Change comment: There is no comment for this version
To version 67.1
edited by Ben
on 2022/08/29 14:09
Change comment: There is no comment for this version

Summary

Details

Page properties
Content
... ... @@ -141,8 +141,7 @@
141 141  
142 142  [[https:~~/~~/drive.google.com/drive/folders/13rgso7oUlatZQN_SNEcJCcN4toEdDPoP?usp=sharing>>url:https://drive.google.com/drive/folders/13rgso7oUlatZQN_SNEcJCcN4toEdDPoP?usp=sharing]]
143 143  
144 -(% class="wikigeneratedid" id="HHMIsettings" %)
145 -**HMI settings**
144 +== HMI settings ==
146 146  
147 147  **Download PIStudio Software**
148 148  
... ... @@ -231,8 +231,7 @@
231 231  * HMI setting: [[https:~~/~~/docs.we-con.com.cn/bin/view/PIStudio/12.PLC%20protocols/>>https://docs.we-con.com.cn/bin/view/PIStudio/12.PLC%20protocols/]]
232 232  * PLC setting: [[https:~~/~~/docs.we-con.com.cn/bin/view/PLC%20Editor/8.1.%09Communication/>>https://docs.we-con.com.cn/bin/view/PLC%20Editor/8.1.%09Communication/]]
233 233  
234 -(% class="wikigeneratedid" id="HPLCsettings" %)
235 -**PLC settings**
233 +== PLC settings ==
236 236  
237 237  **Download PLC Software**
238 238  
... ... @@ -399,6 +399,7 @@
399 399  
400 400  (% id="cke_bm_147709S" style="display:none" %) (%%)This example introduces the establishment of Ethernet communication between Wecon HMI and LX5V. It is introduced through three parts: PLC software configuration, HMI software configuration, and hardware wiring.
401 401  
400 +
402 402  **Software configuration of PLC**
403 403  
404 404  **1）PLC programming software**
... ... @@ -468,49 +468,10 @@
468 468  
469 469  The above are all the steps for establishing ethernet communication between Wecon HMI with LX5V PLC.
470 470  
471 -= Create communication with **Rockwell PLC** =
470 += =
472 472  
473 -== **MicroLogix Protocol** ==
472 += **Allen-Bradley** =
474 474  
475 -MicroLogix 1000/1100/1200/1400/1500; SLC 5/03 5/04 5/05 PLC-5
476 -
477 -**HMI Settings**
478 -
479 -(% class="table-bordered" %)
480 -|**Item**|**Settings**|**Note**
481 -|Protocol|Allen-Bradlley MicroLogix|
482 -|Connection|RS232|
483 -|Baud rate|19200|
484 -|Data bit|8|
485 -|Parity|None|
486 -|Stop bit|1|
487 -|PLC station No.|1|
488 -
489 -**Address List**
490 -
491 -(% class="table-bordered" %)
492 -|**Type**|**Device registers**|**Format**|**Range**|**Note**
493 -|(% rowspan="5" %)Bit|I|I d.d|0.0~~255.15|
494 -|O|O d.d|0.0~~255.15|
495 -|B|B nnhh.dd|0.0~~ffff.15|nn: block number (hex)
496 -|S|S d.d|0.0~~255.15|
497 -|N|N nnhh.dd|0.0~~ffff.15|nn: block number (hex)
498 -|(% rowspan="9" %)Word|S|S d|0~~255|
499 -|TS|TS nnhh|0~~ffff|(% rowspan="8" %)nn: block number (hex)
500 -|TP|TP nnhh|0~~ffff
501 -|CS|CS nnhh|0~~ffff
502 -|CP|CP nnhh|0~~ffff
503 -|N|N nnhh|0~~ffff
504 -|C|C nnhh|0~~ffff
505 -|T|T nnhh|0~~ffff
506 -|R|R nnhh|0~~ffff
507 -
508 -**Cable Wiring**
509 -
510 -
511 -(% style="text-align:center" %)
512 -[[image:12.PLC Protocol_html_58205bdf82c06d4.png||data-xwiki-image-style-alignment="center" height="307" width="500" class="img-thumbnail"]]
513 -
514 514  == **FreeTag Ethernet/IP (CompactLogix)** ==
515 515  
516 516  Allen-Brandly CompactLogix
... ... @@ -568,6 +568,46 @@
568 568  (% style="text-align:center" %)
569 569  [[image:12.PLC Protocol_html_2297240b57346b2a.png||data-xwiki-image-style-alignment="center" height="170" width="400" class="img-thumbnail"]]
570 570  
531 +== **MicroLogix** ==
532 +
533 +MicroLogix 1000/1100/1200/1400/1500; SLC 5/03 5/04 5/05 PLC-5
534 +
535 +**HMI Settings**
536 +
537 +(% class="table-bordered" %)
538 +|**Item**|**Settings**|**Note**
539 +|Protocol|Allen-Bradlley MicroLogix|
540 +|Connection|RS232|
541 +|Baud rate|19200|
542 +|Data bit|8|
543 +|Parity|None|
544 +|Stop bit|1|
545 +|PLC station No.|1|
546 +
547 +**Address List**
548 +
549 +(% class="table-bordered" %)
550 +|**Type**|**Device registers**|**Format**|**Range**|**Note**
551 +|(% rowspan="5" %)Bit|I|I d.d|0.0~~255.15|
552 +|O|O d.d|0.0~~255.15|
553 +|B|B nnhh.dd|0.0~~ffff.15|nn: block number (hex)
554 +|S|S d.d|0.0~~255.15|
555 +|N|N nnhh.dd|0.0~~ffff.15|nn: block number (hex)
556 +|(% rowspan="9" %)Word|S|S d|0~~255|
557 +|TS|TS nnhh|0~~ffff|(% rowspan="8" %)nn: block number (hex)
558 +|TP|TP nnhh|0~~ffff
559 +|CS|CS nnhh|0~~ffff
560 +|CP|CP nnhh|0~~ffff
561 +|N|N nnhh|0~~ffff
562 +|C|C nnhh|0~~ffff
563 +|T|T nnhh|0~~ffff
564 +|R|R nnhh|0~~ffff
565 +
566 +**Cable Wiring**
567 +
568 +(% style="text-align:center" %)
569 +[[image:12.PLC Protocol_html_58205bdf82c06d4.png||data-xwiki-image-style-alignment="center" height="307" width="500" class="img-thumbnail"]]
570 +
571 571  == **AB PLC address edit** ==
572 572  
573 573  The operational address is determined by the connection of Allen-Bradley PLC to HMI. For extension modules or other special conditions, refer to allen-Bradley PLC instruction manual. The following is an example of allen-bradley MicroLogix1200.
... ... @@ -594,8 +594,286 @@
594 594  |(% style="width:393px" %)N|(% style="width:350px" %)ffff|(% style="width:333px" %)N0 ~~ FFFF
595 595  |(% style="width:393px" %)F|(% style="width:350px" %)ffff|(% style="width:333px" %)F0 ~~ FFFF
596 596  
597 -= =
597 += **Barcode Scanner** =
598 598  
599 +Supported: DELI 14880 barcode scanner
600 +
601 +**HMI Setting**
602 +
603 +(% class="table-bordered" %)
604 +|**Items**|**Settings**|**Note**
605 +|Protocol|Barcode Scanner|
606 +|Connection|USB|
607 +
608 +**Operating Procedures**
609 +
610 +Select [Barcode Scanner];
611 +
612 +(% style="text-align:center" %)
613 +[[image:12.PLC Protocol_html_55a3056357320966.png||data-xwiki-image-style-alignment="center" height="266" width="600" class="img-thumbnail"]]
614 +
615 +Set address for receiving;
616 +
617 +Set correct length;
618 +
619 +(% style="text-align:center" %)
620 +[[image:12.PLC Protocol_html_30a4c9e9dd4db40b.png||data-xwiki-image-style-alignment="center" height="701" width="500" class="img-thumbnail"]]
621 +
622 +**✎Note:**
623 +
624 +* The protocol uploads the information acquired by the USB scanner to the HMI;
625 +* The acquired information is displayed in string mode, so it is necessary to use [characters input/display] object;
626 +* Recommended model: DELI 14880 barcode scanner;
627 +
628 += **Hitachi EHV Series (Ethernet)** =
629 +
630 +Supported series: Hitachi EHV series
631 +
632 +**HMI Settings**
633 +
634 +(% class="table-bordered" %)
635 +|**Items**|**Settings**|**Note**
636 +|Protocol|Hitachi EHV series|
637 +|Connection|Ethernet|
638 +|Port No.|3004~~3007|
639 +
640 +**Address List**
641 +
642 +(% class="table-bordered" %)
643 +|**Type**|**Register**|**Range**|**Format**|**Note**
644 +|(% rowspan="6" %)Bit|T|0 - 2545|T DDDD|
645 +|M|0 - 7FFF.f (Hex)|M HHHH.h|
646 +|X|0 – FFFF.f (Hex)|X H1H2H3H4.h|(% rowspan="2" %)(((
647 +H1H2H3H4 Module main number
648 +
649 +H1: Remote number
650 +
651 +H2: Unit number
652 +
653 +H3: Slot number
654 +
655 +H4: Word number of Module
656 +
657 +H Sub number of Module
658 +
659 +For example:X21.3
660 +
661 +Slot number 2
662 +
663 +Word number of module is 1
664 +
665 +Bit number of module is 3
666 +
667 +Remote number and unit number are 0
668 +)))
669 +|Y|0 – FFFF.f (Hex)|Y H1H2H3H4.h
670 +|R|0 – FF.f (Hex)|R HH.h|
671 +|L|0 - 73FF.f (Hex)|L HHHH.h|
672 +|(% rowspan="6" %)Word|WM|0 - 7FFF (Hex)|WM HHHH|
673 +|WX|0 – FFFF (Hex)|WX H1H2H3H4|(% rowspan="2" %)(((
674 +H1H2H3H4 Module main number
675 +
676 +H1: Remote number
677 +
678 +H2: Unit number
679 +
680 +H3: Slot number
681 +
682 +H4: Word number of module
683 +
684 +For example:WX21
685 +
686 +Word number of module is 1
687 +
688 +Slot number is 2
689 +
690 +Remote number and unit number are 0
691 +)))
692 +|WY|0 – FFFF (Hex)|WY H1H2H3H4
693 +|WR|0 – FFFF (Hex)|WR HHHH|
694 +|WL|0 - 73FF (Hex)|WL HHHH|
695 +|TC|0 - 2559|TC DDDD|
696 +
697 +**Communication settings in HMI**
698 +
699 +Enable HMI Ethernet in [Project Settings];
700 +
701 +(% style="text-align:center" %)
702 +[[image:12.PLC Protocol_html_43b671f18153910d.png||data-xwiki-image-style-alignment="center" height="107" width="405" class="img-thumbnail"]]
703 +
704 +Set PLC IP in [Device IP] settings;
705 +
706 +(% style="text-align:center" %)
707 +[[image:12.PLC Protocol_html_d825387f5bde6cdd.png||data-xwiki-image-style-alignment="center" height="190" width="554" class="img-thumbnail"]]
708 +
709 +**PLC Configuration**
710 +
711 +Connect with PLC, select[Online mode];
712 +
713 +(% style="text-align:center" %)
714 +[[image:12.PLC Protocol_html_8430dda44e5c199c.png||data-xwiki-image-style-alignment="center" height="420" width="600" class="img-thumbnail"]]
715 +
716 +Set IP address, it is the same LAN parameters with HMI;
717 +
718 +(% style="text-align:center" %)
719 +[[image:12.PLC Protocol_html_1d8a634f64e25fc3.png||data-xwiki-image-style-alignment="center" height="252" width="347" class="img-thumbnail"]]
720 +
721 +3) Save PLC communication parameter, and restart PLC
722 +
723 +**PLC Monitor Mode**
724 +
725 +Connect with PLC and choose to “online” mode
726 +
727 +(% style="text-align:center" %)
728 +[[image:12.PLC Protocol_html_cdac598e770e3b67.png||data-xwiki-image-style-alignment="center" height="193" width="553" class="img-thumbnail"]]
729 +
730 +Open I/O monitor sheet1
731 +
732 +(% style="text-align:center" %)
733 +[[image:12.PLC Protocol_html_68eb3518e5f80892.png||data-xwiki-image-style-alignment="center" height="369" width="559" class="img-thumbnail"]]
734 +
735 +During monitoring bit address,1 pts should be selected; during monitoring word address, 16 pts should be selected
736 +
737 +(% style="text-align:center" %)
738 +[[image:12.PLC Protocol_html_774652d8daf548d4.png||data-xwiki-image-style-alignment="center" height="118" width="102" class="img-thumbnail"]]
739 +
740 +Enter the register address, click OK to view the value of the register.
741 +
742 +(% style="text-align:center" %)
743 +[[image:12.PLC Protocol_html_bba169c300c92051.png||data-xwiki-image-style-alignment="center" height="404" width="600" class="img-thumbnail"]]
744 +
745 +(% style="text-align:center" %)
746 +[[image:12.PLC Protocol_html_d3b23bb9e81921a3.png||data-xwiki-image-style-alignment="center" height="404" width="600" class="img-thumbnail"]]
747 +
748 +**✎Note:**
749 +
750 +* Both word registers and bit registers support even continuous read/write functions;
751 +* The range of registers is based on the specific PLC type;
752 +
753 +**Cable Wiring**
754 +
755 +(% style="text-align:center" %)
756 +[[image:12.PLC Protocol_html_2297240b57346b2a.png||data-xwiki-image-style-alignment="center" height="170" width="401" class="img-thumbnail"]]
757 +
758 += **IEC60870-5 104 Client** =
759 +
760 +**HMI Setting**
761 +
762 +(% class="table-bordered" %)
763 +|**Items**|(% style="width:725px" %)**Settings**|(% style="width:309px" %)**Note**
764 +|Protocol|(% style="width:725px" %)IEC60870-5 104 Client|(% style="width:309px" %)
765 +|Connection|(% style="width:725px" %)Ethernet|(% style="width:309px" %)
766 +|Port No.|(% style="width:725px" %)2404|(% style="width:309px" %)
767 +
768 +**Address List**
769 +
770 +(% class="table-bordered" %)
771 +|(% style="width:460px" %)**Type**|(% style="width:461px" %)**Register**|**Range**
772 +|(% rowspan="9" style="width:460px" %)Bit|(% style="width:461px" %)SPTB|0~~16777215.7
773 +|(% style="width:461px" %)SCNA|0~~16777215.7
774 +|(% style="width:461px" %)DPTB|0~~16777215.7
775 +|(% style="width:461px" %)DCNA|0~~16777215.7
776 +|(% style="width:461px" %)METF|0~~16777215.7
777 +|(% style="width:461px" %)SENC|0~~16777215.7
778 +|(% style="width:461px" %)SENA|0~~16777215.7
779 +|(% style="width:461px" %)MENA|0~~16777215.7
780 +|(% style="width:461px" %)METD|0~~16777215.7
781 +|(% rowspan="11" style="width:460px" %)Word|(% style="width:461px" %)SPTB|0~~16777215
782 +|(% style="width:461px" %)SCNA|0~~16777215
783 +|(% style="width:461px" %)DPTB|0~~16777215
784 +|(% style="width:461px" %)DCNA|0~~16777215
785 +|(% style="width:461px" %)SENA|0~~16777215
786 +|(% style="width:461px" %)MENA|0~~16777215
787 +|(% style="width:461px" %)METD|0~~16777215
788 +|(% style="width:461px" %)INRO|0~~16777215
789 +|(% style="width:461px" %)TIMESYN|0~~16777215
790 +|(% style="width:461px" %)TIMEZ|0~~16777215
791 +|(% style="width:461px" %)NTP|0~~16777215
792 +|(% rowspan="2" style="width:460px" %)Double word|(% style="width:461px" %)METF|0~~16777215
793 +|(% style="width:461px" %)SENC|0~~16777215
794 +
795 +**Address Configuration**
796 +
797 +The address registers of the IEC60870-5-104 protocol are SPTB, SCNA, DPTB, DCNA, METF, and SENC. The protocol needs to be added with an extension tag "ASDU", which could only be added in the [Address Identification Library], other places are not editable, that is, the read address in the object or script is not editable.
798 +
799 +(% style="text-align:center" %)
800 +[[image:12.PLC Protocol_html_ba78d143bf457ead.png||data-xwiki-image-style-alignment="center" height="369" width="600" class="img-thumbnail"]]
801 +
802 +(% style="text-align:center" %)
803 +[[image:12.PLC Protocol_html_23533fd5bb81f4ab.png||data-xwiki-image-style-alignment="center" height="389" width="600" class="img-thumbnail"]]
804 +
805 +Extended tag name
806 +
807 +Address range for the extended tag.
808 +
809 +**Communication Settings**
810 +
811 +Enable HMI Ethernet in [Project Settings];
812 +
813 +(% style="text-align:center" %)
814 +[[image:12.PLC Protocol_html_43b671f18153910d.png||data-xwiki-image-style-alignment="center" height="107" width="405" class="img-thumbnail"]]
815 +
816 +Set PLC IP in [Device IP] settings;
817 +
818 +(% style="text-align:center" %)
819 +[[image:12.PLC Protocol_html_f848736ec68b125.png||data-xwiki-image-style-alignment="center" height="191" width="554" class="img-thumbnail"]]
820 +
821 +**Cable Wiring**
822 +
823 +(% style="text-align:center" %)
824 +[[image:12.PLC Protocol_html_2297240b57346b2a.png||data-xwiki-image-style-alignment="center" height="170" width="401" class="img-thumbnail"]]
825 +
826 += **LG XGK FEnet Ethernet** =
827 +
828 +Supported Series: LS XGT series XGK CPU with XGL-EFMT Ethernet module
829 +
830 +**HMI Settings**
831 +
832 +(% class="table-bordered" %)
833 +|**Items**|**Settings**|**Note**
834 +|Protocol|LG XGK FEnet(Ethernet)|
835 +|Connection|Ethernet|
836 +|Port No.|2004|
837 +
838 +**Address List**
839 +
840 +(% class="table-bordered" %)
841 +|**Type**|**Register**|**Range**|**Format**|**Note**
842 +|(% rowspan="14" %)Word|P|0~~2047|P d|
843 +|M|0~~2047|M d|
844 +|K|0~~2047|K d|
845 +|F|0~~2047|F d|
846 +|T|0~~2047|T d|
847 +|C|0~~2047|C d|
848 +|Z|0~~127|Z d|
849 +|S|0~~127|S d|
850 +|L|0~~11263|L d|
851 +|N|0~~21503|N d|
852 +|D|0~~32767|D d|
853 +|R|0~~32767|R d|
854 +|ZR|0~~65535|ZR d|
855 +|UxDD|0~~6331|UxDD nndd|nn: 0~~63, dd: 0~~31
856 +
857 +**✎Note:**
858 +
859 +* In addition to the "UxDD" register, the others correspond to the PLC register one by one. UxDD corresponds to U in the PLC;
860 +* The [UxDD] register, defined in the PLC is Ux.dd, x represents the block, and dd represents 0-31 of each block. There are 64 blocks in the PLC;
861 +* All bit registers are in the form of bits in word, and the range is the same as the word register;
862 +
863 +**Communication settings in HMI**
864 +
865 +Enable HMI Ethernet in [Project Settings];
866 +
867 +(% style="text-align:center" %)
868 +[[image:12.PLC Protocol_html_43b671f18153910d.png||data-xwiki-image-style-alignment="center" height="107" width="405" class="img-thumbnail"]]
869 +
870 +Set PLC IP in [Device IP] settings;
871 +
872 +(% style="text-align:center" %)
873 +[[image:12.PLC Protocol_html_a2a19b5003ad4090.png||data-xwiki-image-style-alignment="center" height="189" width="554" class="img-thumbnail"]]
874 +
875 +**Cable Wiring**
876 +
599 599  = **Mitsubishi** =
600 600  
601 601  == **FX1S, 1N, 2N Series** ==
... ... @@ -2369,6 +2369,8 @@
2369 2369  
2370 2370  **✎Note:** COM3 only available in PI8000/PI9000 series.
2371 2371  
2650 += =
2651 +
2372 2372  = **Printer** =
2373 2373  
2374 2374  == **TSPL label printer** ==
... ... @@ -2569,283 +2569,3 @@
2569 2569  
2570 2570  (% style="text-align:center" %)
2571 2571  [[image:image-20220817154212-1.jpeg||height="315" width="554" class="img-thumbnail"]]
2572 -
2573 -= **Barcode Scanner** =
2574 -
2575 -Supported: DELI 14880 barcode scanner
2576 -
2577 -**HMI Setting**
2578 -
2579 -|**Items**|**Settings**|**Note**
2580 -|Protocol|Barcode Scanner|
2581 -|Connection|USB|
2582 -
2583 -**Operating Procedures**
2584 -
2585 -Select [Barcode Scanner];
2586 -
2587 -(% style="text-align:center" %)
2588 -[[image:12.PLC Protocol_html_55a3056357320966.png||data-xwiki-image-style-alignment="center" height="266" width="600" class="img-thumbnail"]]
2589 -
2590 -Set address for receiving;
2591 -
2592 -Set correct length;
2593 -
2594 -(% style="text-align:center" %)
2595 -[[image:12.PLC Protocol_html_30a4c9e9dd4db40b.png||data-xwiki-image-style-alignment="center" height="701" width="500" class="img-thumbnail"]]
2596 -
2597 -**✎Note:**
2598 -
2599 -* The protocol uploads the information acquired by the USB scanner to the HMI;
2600 -* The acquired information is displayed in string mode, so it is necessary to use [characters input/display] object;
2601 -* Recommended model: DELI 14880 barcode scanner;
2602 -
2603 -
2604 -= **Hitachi EHV Series (Ethernet)** =
2605 -
2606 -Supported series: Hitachi EHV series
2607 -
2608 -**HMI Settings**
2609 -
2610 -(% class="table-bordered" %)
2611 -|**Items**|**Settings**|**Note**
2612 -|Protocol|Hitachi EHV series|
2613 -|Connection|Ethernet|
2614 -|Port No.|3004~~3007|
2615 -
2616 -**Address List**
2617 -
2618 -(% class="table-bordered" %)
2619 -|**Type**|**Register**|**Range**|**Format**|**Note**
2620 -|(% rowspan="6" %)Bit|T|0 - 2545|T DDDD|
2621 -|M|0 - 7FFF.f (Hex)|M HHHH.h|
2622 -|X|0 – FFFF.f (Hex)|X H1H2H3H4.h|(% rowspan="2" %)(((
2623 -H1H2H3H4 Module main number
2624 -
2625 -H1: Remote number
2626 -
2627 -H2: Unit number
2628 -
2629 -H3: Slot number
2630 -
2631 -H4: Word number of Module
2632 -
2633 -H Sub number of Module
2634 -
2635 -For example:X21.3
2636 -
2637 -Slot number 2
2638 -
2639 -Word number of module is 1
2640 -
2641 -Bit number of module is 3
2642 -
2643 -Remote number and unit number are 0
2644 -)))
2645 -|Y|0 – FFFF.f (Hex)|Y H1H2H3H4.h
2646 -|R|0 – FF.f (Hex)|R HH.h|
2647 -|L|0 - 73FF.f (Hex)|L HHHH.h|
2648 -|(% rowspan="6" %)Word|WM|0 - 7FFF (Hex)|WM HHHH|
2649 -|WX|0 – FFFF (Hex)|WX H1H2H3H4|(% rowspan="2" %)(((
2650 -H1H2H3H4 Module main number
2651 -
2652 -H1: Remote number
2653 -
2654 -H2: Unit number
2655 -
2656 -H3: Slot number
2657 -
2658 -H4: Word number of module
2659 -
2660 -For example:WX21
2661 -
2662 -Word number of module is 1
2663 -
2664 -Slot number is 2
2665 -
2666 -Remote number and unit number are 0
2667 -)))
2668 -|WY|0 – FFFF (Hex)|WY H1H2H3H4
2669 -|WR|0 – FFFF (Hex)|WR HHHH|
2670 -|WL|0 - 73FF (Hex)|WL HHHH|
2671 -|TC|0 - 2559|TC DDDD|
2672 -
2673 -**Communication settings in HMI**
2674 -
2675 -Enable HMI Ethernet in [Project Settings];
2676 -
2677 -(% style="text-align:center" %)
2678 -[[image:12.PLC Protocol_html_43b671f18153910d.png||data-xwiki-image-style-alignment="center" height="107" width="405" class="img-thumbnail"]]
2679 -
2680 -Set PLC IP in [Device IP] settings;
2681 -
2682 -(% style="text-align:center" %)
2683 -[[image:12.PLC Protocol_html_d825387f5bde6cdd.png||data-xwiki-image-style-alignment="center" height="190" width="554" class="img-thumbnail"]]
2684 -
2685 -**PLC Configuration**
2686 -
2687 -Connect with PLC, select[Online mode];
2688 -
2689 -(% style="text-align:center" %)
2690 -[[image:12.PLC Protocol_html_8430dda44e5c199c.png||data-xwiki-image-style-alignment="center" height="420" width="600" class="img-thumbnail"]]
2691 -
2692 -Set IP address, it is the same LAN parameters with HMI;
2693 -
2694 -(% style="text-align:center" %)
2695 -[[image:12.PLC Protocol_html_1d8a634f64e25fc3.png||data-xwiki-image-style-alignment="center" height="252" width="347" class="img-thumbnail"]]
2696 -
2697 -3) Save PLC communication parameter, and restart PLC
2698 -
2699 -**PLC Monitor Mode**
2700 -
2701 -Connect with PLC and choose to “online” mode
2702 -
2703 -(% style="text-align:center" %)
2704 -[[image:12.PLC Protocol_html_cdac598e770e3b67.png||data-xwiki-image-style-alignment="center" height="193" width="553" class="img-thumbnail"]]
2705 -
2706 -Open I/O monitor sheet1
2707 -
2708 -(% style="text-align:center" %)
2709 -[[image:12.PLC Protocol_html_68eb3518e5f80892.png||data-xwiki-image-style-alignment="center" height="369" width="559" class="img-thumbnail"]]
2710 -
2711 -During monitoring bit address,1 pts should be selected; during monitoring word address, 16 pts should be selected
2712 -
2713 -(% style="text-align:center" %)
2714 -[[image:12.PLC Protocol_html_774652d8daf548d4.png||data-xwiki-image-style-alignment="center" height="118" width="102" class="img-thumbnail"]]
2715 -
2716 -Enter the register address, click OK to view the value of the register.
2717 -
2718 -(% style="text-align:center" %)
2719 -[[image:12.PLC Protocol_html_bba169c300c92051.png||data-xwiki-image-style-alignment="center" height="404" width="600" class="img-thumbnail"]]
2720 -
2721 -(% style="text-align:center" %)
2722 -[[image:12.PLC Protocol_html_d3b23bb9e81921a3.png||data-xwiki-image-style-alignment="center" height="404" width="600" class="img-thumbnail"]]
2723 -
2724 -**✎Note:**
2725 -
2726 -* Both word registers and bit registers support even continuous read/write functions;
2727 -* The range of registers is based on the specific PLC type;
2728 -
2729 -**Cable Wiring**
2730 -
2731 -(% style="text-align:center" %)
2732 -[[image:12.PLC Protocol_html_2297240b57346b2a.png||data-xwiki-image-style-alignment="center" height="170" width="401" class="img-thumbnail"]]
2733 -
2734 -= **IEC60870-5 104 Client** =
2735 -
2736 -**HMI Setting**
2737 -
2738 -(% class="table-bordered" %)
2739 -|**Items**|(% style="width:725px" %)**Settings**|(% style="width:309px" %)**Note**
2740 -|Protocol|(% style="width:725px" %)IEC60870-5 104 Client|(% style="width:309px" %)
2741 -|Connection|(% style="width:725px" %)Ethernet|(% style="width:309px" %)
2742 -|Port No.|(% style="width:725px" %)2404|(% style="width:309px" %)
2743 -
2744 -**Address List**
2745 -
2746 -(% class="table-bordered" %)
2747 -|(% style="width:460px" %)**Type**|(% style="width:461px" %)**Register**|**Range**
2748 -|(% rowspan="9" style="width:460px" %)Bit|(% style="width:461px" %)SPTB|0~~16777215.7
2749 -|(% style="width:461px" %)SCNA|0~~16777215.7
2750 -|(% style="width:461px" %)DPTB|0~~16777215.7
2751 -|(% style="width:461px" %)DCNA|0~~16777215.7
2752 -|(% style="width:461px" %)METF|0~~16777215.7
2753 -|(% style="width:461px" %)SENC|0~~16777215.7
2754 -|(% style="width:461px" %)SENA|0~~16777215.7
2755 -|(% style="width:461px" %)MENA|0~~16777215.7
2756 -|(% style="width:461px" %)METD|0~~16777215.7
2757 -|(% rowspan="11" style="width:460px" %)Word|(% style="width:461px" %)SPTB|0~~16777215
2758 -|(% style="width:461px" %)SCNA|0~~16777215
2759 -|(% style="width:461px" %)DPTB|0~~16777215
2760 -|(% style="width:461px" %)DCNA|0~~16777215
2761 -|(% style="width:461px" %)SENA|0~~16777215
2762 -|(% style="width:461px" %)MENA|0~~16777215
2763 -|(% style="width:461px" %)METD|0~~16777215
2764 -|(% style="width:461px" %)INRO|0~~16777215
2765 -|(% style="width:461px" %)TIMESYN|0~~16777215
2766 -|(% style="width:461px" %)TIMEZ|0~~16777215
2767 -|(% style="width:461px" %)NTP|0~~16777215
2768 -|(% rowspan="2" style="width:460px" %)Double word|(% style="width:461px" %)METF|0~~16777215
2769 -|(% style="width:461px" %)SENC|0~~16777215
2770 -
2771 -**Address Configuration**
2772 -
2773 -The address registers of the IEC60870-5-104 protocol are SPTB, SCNA, DPTB, DCNA, METF, and SENC. The protocol needs to be added with an extension tag "ASDU", which could only be added in the [Address Identification Library], other places are not editable, that is, the read address in the object or script is not editable.
2774 -
2775 -(% style="text-align:center" %)
2776 -[[image:12.PLC Protocol_html_ba78d143bf457ead.png||data-xwiki-image-style-alignment="center" height="369" width="600" class="img-thumbnail"]]
2777 -
2778 -(% style="text-align:center" %)
2779 -[[image:12.PLC Protocol_html_23533fd5bb81f4ab.png||data-xwiki-image-style-alignment="center" height="389" width="600" class="img-thumbnail"]]
2780 -
2781 -Extended tag name
2782 -
2783 -Address range for the extended tag.
2784 -
2785 -**Communication Settings**
2786 -
2787 -Enable HMI Ethernet in [Project Settings];
2788 -
2789 -(% style="text-align:center" %)
2790 -[[image:12.PLC Protocol_html_43b671f18153910d.png||data-xwiki-image-style-alignment="center" height="107" width="405" class="img-thumbnail"]]
2791 -
2792 -Set PLC IP in [Device IP] settings;
2793 -
2794 -(% style="text-align:center" %)
2795 -[[image:12.PLC Protocol_html_f848736ec68b125.png||data-xwiki-image-style-alignment="center" height="191" width="554" class="img-thumbnail"]]
2796 -
2797 -**Cable Wiring**
2798 -
2799 -(% style="text-align:center" %)
2800 -[[image:12.PLC Protocol_html_2297240b57346b2a.png||data-xwiki-image-style-alignment="center" height="170" width="401" class="img-thumbnail"]]
2801 -
2802 -= **LG XGK FEnet Ethernet** =
2803 -
2804 -Supported Series: LS XGT series XGK CPU with XGL-EFMT Ethernet module
2805 -
2806 -**HMI Settings**
2807 -
2808 -(% class="table-bordered" %)
2809 -|**Items**|**Settings**|**Note**
2810 -|Protocol|LG XGK FEnet(Ethernet)|
2811 -|Connection|Ethernet|
2812 -|Port No.|2004|
2813 -
2814 -**Address List**
2815 -
2816 -(% class="table-bordered" %)
2817 -|**Type**|**Register**|**Range**|**Format**|**Note**
2818 -|(% rowspan="14" %)Word|P|0~~2047|P d|
2819 -|M|0~~2047|M d|
2820 -|K|0~~2047|K d|
2821 -|F|0~~2047|F d|
2822 -|T|0~~2047|T d|
2823 -|C|0~~2047|C d|
2824 -|Z|0~~127|Z d|
2825 -|S|0~~127|S d|
2826 -|L|0~~11263|L d|
2827 -|N|0~~21503|N d|
2828 -|D|0~~32767|D d|
2829 -|R|0~~32767|R d|
2830 -|ZR|0~~65535|ZR d|
2831 -|UxDD|0~~6331|UxDD nndd|nn: 0~~63, dd: 0~~31
2832 -
2833 -**✎Note:**
2834 -
2835 -* In addition to the "UxDD" register, the others correspond to the PLC register one by one. UxDD corresponds to U in the PLC;
2836 -* The [UxDD] register, defined in the PLC is Ux.dd, x represents the block, and dd represents 0-31 of each block. There are 64 blocks in the PLC;
2837 -* All bit registers are in the form of bits in word, and the range is the same as the word register;
2838 -
2839 -**Communication settings in HMI**
2840 -
2841 -Enable HMI Ethernet in [Project Settings];
2842 -
2843 -(% style="text-align:center" %)
2844 -[[image:12.PLC Protocol_html_43b671f18153910d.png||data-xwiki-image-style-alignment="center" height="107" width="405" class="img-thumbnail"]]
2845 -
2846 -Set PLC IP in [Device IP] settings;
2847 -
2848 -(% style="text-align:center" %)
2849 -[[image:12.PLC Protocol_html_a2a19b5003ad4090.png||data-xwiki-image-style-alignment="center" height="189" width="554" class="img-thumbnail"]]
2850 -
2851 -**Cable Wiring**