Skip to Content

Changes for page 1 Communication

Last modified by Hunter on 2024/07/01 10:54
From version 256.1
edited by Theodore Xu
on 2023/08/23 19:27
Change comment: There is no comment for this version
To version 165.1
edited by Bob
on 2022/11/15 19:58
Change comment: There is no comment for this version

Summary

Details

Page properties
Author
... ... @@ -1,1 +1,1 @@
1 -XWiki.AiXia
1 +XWiki.Bob
Content
... ... @@ -1,6 +1,6 @@
1 -= WECON =
1 += Create communication with WECON PLC =
2 2  
3 -== **LX3V Serial ** ==
3 +== **LX3V Serial Protocol** ==
4 4  
5 5  Supported series: Wecon LX2V/ LX2E/ LX3V/LX3VP/LX3VE/LX3VM
6 6  
... ... @@ -48,7 +48,7 @@
48 48  
49 49   [[image:image-20220824120524-3.png]]
50 50  
51 -== **LX5V Serial ** ==
51 +== **LX5V Serial Protocol** ==
52 52  
53 53  This example introduces the establishment of serial port communication between V-BOX and LX5V. It is introduced through three parts: PLC software configuration, V-BOX software configuration, and hardware wiring.
54 54  
... ... @@ -118,7 +118,7 @@
118 118  
119 119  The above are all the steps for establishing serial port communication between V-BOX with LX5V PLC.
120 120  
121 -== **LX5V-N Ethernet ** ==
121 +== **LX5V-N Ethernet protocol** ==
122 122  
123 123  This example introduces the establishment of Ethernet communication between V-BOX and LX5V-N. It is introduced through three parts: PLC software configuration, V-BOX software configuration, and hardware wiring.
124 124  
... ... @@ -176,116 +176,16 @@
176 176  
177 177  The above are all the steps for establishing ethernet communication between V-BOX with LX5V PLC.
178 178  
179 -= Allen-Bradley(**Rockwell**) =
179 += Create communication with **Rockwell PLC** =
180 180  
181 -== **DF1 Advanced  Serial** ==
181 +== (% id="cke_bm_5621S" style="display:none" %)** **(%%)**MicroLogix Protocol** ==
182 182  
183 -MicroLogix 1000/1100/1200/1400/1500; SLC 5/03 5/04 5/05; PLC-5
184 -
185 -**1) V-Box Settings**
186 -
187 -|=Item|=Recommended |=Note
188 -|=Protocol|Allen Bradley DF1 Advanced|
189 -|=Connection|RS232|
190 -|=Baud rate|19200|
191 -|=Stop bits|1|
192 -|=Data bits|8|
193 -|=Parity|None|
194 -|=PLC Station No.|1|
195 -|=HMI Station No.|0|
196 -
197 -**2) Address List**
198 -
199 -|=**Type**|=**Device registers**|=**Format**|=**Range**|=Note
200 -|(% colspan="1" rowspan="7" %)Bit|I1|I1ddd.dd|0.0~~255.15|Only able to communicate with file number I1
201 -|O0|O0ddd.dd|0.0~~255.15|Only able to communicate with file number O0
202 -|S2|S2ddd.dd|0.0~~255.15|Only able to communicate with file number S2
203 -|B3|B3ddd.dd|0.0~~255.15|Only able to communicate with file number B3
204 -|BN|BNddddd.dd|0.0~~99255.15|(((
205 -Bit data file B0~~B99
206 -
207 -First two digits is for file number
208 -
209 -For example, BN13001.00 represents file number B13, address 001, the 0th bit.
210 -)))
211 -|N7|N7ddd.dd|0.0~~255.15|Only able to communicate with file number N7
212 -|NN|NNddddd.dd|0.0~~99255.15|(((
213 -Integer data file bit format N0~~N99
214 -
215 -First two digits is for file number
216 -
217 -For example, NN13001.00 represents file number N13, address 001, the 0th bit.
218 -)))
219 -|(% rowspan="11" %)Word|S2|S2ddd|0~~255|Only able to communicate with file number S2
220 -|T4S|T4Sddd|0~~255|Only able to communicate with file number T4 (Timer Preset Value)
221 -|T4P|T4Pddd|0~~255|Only able to communicate with file number T4 (Timer Accumulator Value)
222 -|TNS|TNSddddd|0~~99255|(((
223 -Timer Preset Value
224 -
225 -First two digits is for file number
226 -
227 -For example, TNS99255 represents file number T99, address 255.
228 -)))
229 -|TNP|TNPddddd|0~~99255|(((
230 -Timer Accumulator Value
231 -
232 -First two digits is for file number
233 -
234 -For example, TNP99255 represents file number T99, address 255.
235 -)))
236 -|C5S|C5Sddd|0~~255|Only able to communicate with file number C5 (Counter Preset Value)
237 -|C5P|C5Pddd|0~~255|Only able to communicate with file number C5 (Counter Accumulator Value)
238 -|CNS|CNSddddd|0~~99255|(((
239 -Counter Preset Value
240 -
241 -First two digits is for file number
242 -
243 -For example, CNS99255 represents file number C99, address 255.
244 -)))
245 -|CNP|CNPddddd|0~~99255|(((
246 -Counter Accumulator Value
247 -
248 -First two digits is for file number
249 -
250 -For example, CNP99255 represents file number C99, address 255.
251 -)))
252 -|N7|N7ddd|0~~255|Only able to communicate with file number N7
253 -|NN|NNddd|0~~99255|(((
254 -Integer data file
255 -
256 -First two digits is for file number
257 -
258 -For example, NN99255 represents file number N99, address 255.
259 -)))
260 -|(% colspan="1" rowspan="3" %)Double Word|F8|F8ddd|0~~255|(((
261 -Only able to communicate with file number N7
262 -)))
263 -|FN|FNddddd|0~~99255|(((
264 -Floating point data file
265 -
266 -First two digits is for file number
267 -
268 -For example, FN99255 represents file number F99, address 255.
269 -)))
270 -|LN|LNddddd|0~~99255|Long
271 -
272 -**3) Cable Wiring**
273 -
274 -(% style="text-align:center" %)
275 -[[image:ABRS232.gif]]
276 -
277 -(% class="wikigeneratedid" id="HMicroLogixA0Protocol" %)
278 -(% id="cke_bm_5621S" style="display:none" %)** **
279 -
280 -== **MicroLogix Serial** ==
281 -
282 -(% class="wikigeneratedid" %)
283 283  MicroLogix 1000/1100/1200/1400/1500; SLC 5/03 5/04 5/05 PLC-5
284 284  
285 285  **1）V-BOX setting**
286 286  
287 287  |**Item**|**Settings**|**Note**
288 -|Protocol|Allen-Bradley DF1 Advanced|
188 +|Protocol|Allen-Bradlley DF1 Advanced|
289 289  |Connection|RS232|
290 290  |Baud rate|19200|
291 291  |Data bit|8|
... ... @@ -317,7 +317,7 @@
317 317  
318 318  [[image:image-20220824110724-1.png]]
319 319  
320 -== **Micro850_FreeTag Ethernet** ==
220 +== **Micro850_FreeTag Protocol** ==
321 321  
322 322  (((
323 323  (((
... ... @@ -520,293 +520,20 @@
520 520  The above are all the steps for establishing Ethernet communication between Wecon V-box with CompactLogix L1769 PLC.
521 521  
522 522  
523 -== **Micro850_FreeTag Ethernet（new）** ==
423 +== **Allen-Bradley Ethernet DF1** ==
524 524  
525 -This example introduces the establishment of Ethernet communication between Wecon V-box and 2080-LC50-48QWB,Micro850. It is introduced through three parts: PLC software configuration, V-box software configuration.
526 -
527 -(% class="wikigeneratedid" id="HSoftwareconfigurationofPLC" %)
528 -(((
529 -**Software configuration of PLC**
530 -)))
531 -
532 -(% class="wikigeneratedid" id="HPLCprogrammingsoftware" %)
533 -(((
534 -**1）PLC programming software：Connected Components Workbench™**
535 -
536 -(% style="text-align:center" %)
537 -[[image:software.png]]
538 -
539 -**2）New PLC project**
540 -
541 -Click New Project and select the PLC model.
542 -
543 -(% style="text-align:center" %)
544 -[[image:project create.png]]
545 -
546 -**3）Set Ethernet parameters**
547 -
548 -Follow the steps below to configure Ethernet parameters
549 -
550 -PLC IP address：192.168.39.56
551 -
552 -default gateway：192.168.39.1
553 -
554 -subnet mask：255.255.255.0
555 -
556 -(% style="text-align:center" %)
557 -[[image:Ethernet.png]]
558 -
559 -**4）connect PLC**
560 -
561 -**When downloading the setting, need to change the status of the PLC to PRG**
562 -
563 -(% style="text-align:center" %)
564 -[[image:conne ab plc.png]]
565 -
566 -**V-box software configuration**
567 -
568 -**1）V-box programming software**
569 -
570 -(% style="text-align:center" %)
571 -[[image:v-net client vers.png]]
572 -
573 -**2）Set communication port parameters**
574 -
575 -In the device list on the left, find the Vbox that communicates with the L1769, click it and select configuration,communication port configuration in the main interface to add a communication protocol.
576 -
577 -(% style="text-align:center" %)
578 -[[image:V-NET_Client_t2Rg2wpSoY.png]]
579 -
580 -The communication port is selected as Ethernet, the device type is selected as Allen-Bradley, the protocol is Allen-BradleyMicro850_FreeTag EthemetIP, and the IP is the internal IP address of the L1769 PLC. The port number is 44818.
581 -
582 -(% style="text-align:center" %)
583 -[[image:V-NET_Client_communication.png]]
584 -
585 -Export variables from PLC, select CSV file, comma delimited.(% id="cke_bm_1950S" style="display:none" %)
586 -
587 -(% style="text-align:center" %)
588 -[[image:export1.png]]
589 -
590 -(% style="text-align:center" %)
591 -[[image:CCW.Shell_E5Cwj4tUL3.png]]
592 -
593 -After adding the protocol Allen-BradleyMicro850_FreeTag, click[[image:https://docs.we-con.com.cn/bin/download/V-BOX/V-Net/Training/1%20Communication/WebHome/image-20220714143838-2.png?rev=1.1||alt="image-20220714143838-2.png"]]icon add label.
594 -
595 -(% style="text-align:center" %)
596 -[[image:V-NET_Client_TNBuqy7T5r.png]]
597 -
598 -**3）Engineering production**
599 -
600 -According to your own needs, use the V-NET client software to edit the required data monitoring points.
601 -
602 -(% style="text-align:center" %)
603 -[[image:V-NET_Client_KOR0AHEA4M.png]]
604 -
605 -
606 -)))
607 -
608 -== **Ethernet DF1 Protocol** ==
609 -
610 610  [[download link>>https://ftp.we-con.com.cn/Download/WIKI/V-BOX/Demo/%E9%80%9A%E8%AE%AF%E6%A1%88%E4%BE%8B/Allen-Bradley%20Ethernet%20DF1.zip]]
611 611  
612 -= Create communication with **Crouzet PLC** =
613 613  
614 -== **CROUZET M3 (FBD)** ==
428 += Create communication with **Siemens PLC** =
615 615  
616 -Support Series: Crouzet Millenium 3 CD12/CB12
430 +== **S7-200 Smart Ethernet Protocol** ==
617 617  
618 -**1）V-BOX setting**
619 -
620 -|=Item|=Recommended |=Note
621 -|=Protocol|CROUZET M3 (FBD)|
622 -|=Connection|RS232|
623 -|=Baud rate|115200|
624 -|=Stop bits|1|
625 -|=Data bits|7|
626 -|=Parity|EVEN|
627 -
628 -**2）Address List**
629 -
630 -|=**Type**|=**Device registers**|=**Format**|=**Range**|=Note
631 -|(% rowspan="4" %)Bit|I|I DD|1~~99|Input
632 -|SLIBit|SLIBit DD.dd|1.0~~24.15|Serial Link Input
633 -|SLOBit|SLOBit DD.dd|25.0~~48.15|Serial Link Output(Read only)
634 -|State|State D|1~~1|PLC state(Read only)
635 -|(% rowspan="5" %)Word|AI|AI DD|1~~99|Analog Input
636 -|SLIn|SLIn DD|1~~24|Serial Link Input
637 -|SLOut|SLOut DD|25~~48|Serial Link Output(Read only)
638 -|Time|Time D|1~~6|(((
639 -Time1: Second
640 -
641 -Time2: Minute
642 -
643 -Time3: Hour
644 -
645 -Time4: Day
646 -
647 -Time5: Month
648 -
649 -Time6: Year
650 -)))
651 -|Order|Order D|1~~1|(((
652 -Running command(Write only)
653 -
654 -~=2: Run mode; =1: Stop mode;
655 -)))
656 -
657 -**3）Cable Wiring**
658 -
659 -(% style="text-align:center" %)
660 -[[image:CrouzetRS232 VBox.png]]
661 -
662 -{{info}}
663 -**✎Note: **As the wiring diagram indicated, this protocol requires the DB9 serial port pin 4. But pin 4 is undefined for all V-Box, so it need the user to solder a Pull-up resistor to make the pin 4 working. As for how to solder the resistor on the motherboard, please contact with Wecon technical support for the details.
664 -{{/info}}
665 -
666 -= EMERSON =
667 -
668 -= **RTU Slave ** =
669 -
670 -Supported series: EC10 series
671 -
672 -**1）V-BOX setting**
673 -
674 -|**Items**|**Settings**|**Note**
675 -|Protocol|Emerson 984 RTU Slave MODBUS|
676 -|Connection|RS485|
677 -|Baud rate|19200|
678 -|Data bit|8|
679 -|Parity|EVEN|
680 -|Stop bit|1|
681 -|Device station No.|1|Need to be same as the PLC setting
682 -
683 -(% class="wikigeneratedid" %)
684 -**2）PLC Setting**
685 -
686 -(% class="wikigeneratedid" %)
687 -Remember to use the Control Star to enable the Modbus RTU communication for port 1 in system block before dowload into PLC.
688 -
689 -(% style="text-align:center" %)
690 -[[image:ControlStarSystemBlock.png]]
691 -
692 -(% style="text-align:center" %)
693 -[[image:ControlStarCommunicate.png]]
694 -
695 -(% style="text-align:center" %)
696 -[[image:ControlStarModbus.png]]
697 -
698 -(% class="wikigeneratedid" %)
699 -**3）Address List**
700 -
701 -|**Type**|**Device registers**|**Format**|**Range**|**Note**
702 -|(% colspan="1" rowspan="12" %)Bit|Y|YOOO|0~~377|
703 -|X|XOOO|0~~377|
704 -|M0|M0DDDD|0~~2047|
705 -|M1|M1DDDDD|2048~~10239|
706 -|SM0|SM0DDD|0~~255|
707 -|SM1|SM1DDD|256~~511|
708 -|S0|S0DDDD|0~~1023|
709 -|S1|S1DDDD|1024~~4095|
710 -|T0|T0DDD|0~~255|
711 -|T1|T1DDD|256~~511|
712 -|C0|C0DDD|0~~255|
713 -|C1|C1DDD|256~~306|
714 -|(% colspan="1" rowspan="7" %)Word|D|DDDDD|0~~7999|
715 -|Z|ZDD|0~~15|
716 -|TW0|TW0DDD|0~~255|
717 -|TW1|TW1DDD|256~~511|
718 -|SD0|SD0DDD|0~~255|
719 -|SD1|SD1DDD|256~~511|
720 -|CW|CWDDD|0~~306|
721 -|(% colspan="1" rowspan="2" %)Double Word|CW0|CW0DDD|200~~255|
722 -|CW1|CW1DDDDD|256~~99999|
723 -
724 -**4) Cable Wiring**
725 -
726 -(% style="text-align:center" %)
727 -[[image:Emerson.png]]
728 -
729 -= HollySys PLC =
730 -
731 -== **LK Modbus RTU ** ==
732 -
733 -Supported Series: HollySys LK series PLC
734 -
735 -**1）V-BOX setting**
736 -
737 -|**Items**|**Settings**|**Note**
738 -|Protocol|HollySys LK Modbus RTU|
739 -|Connection|RS485|
740 -|Baud rate|38400|
741 -|Data bit|8|
742 -|Parity|None|
743 -|Stop bit|1|
744 -|Device station No.|1|
745 -
746 -**2）Address List**
747 -
748 -|=**Type**|=**Device registers**|=**Format**|=**Range**|=**Note**
749 -|Bit|QX|QXDDDDD.dd|0~~65535.15|
750 -|Bit|IX|IXDDDDD.dd|0~~65535.15|
751 -|Bit|MX|MXDDDDD.dd|0~~65535.15|
752 -|Word|QW|QWDDDDD|0~~99999|
753 -|Word|IW|IWDDDDD|0~~99999|
754 -|Word|MW|MWDDDDD|0~~99999|
755 -|Word|MD|MDDDDDD|0~~99999|
756 -
757 -**3）Cable Wiring**
758 -
759 -(% style="text-align:center" %)
760 -[[image:Hollysys485-2.png]]
761 -
762 -== **LM Modbus RTU** ==
763 -
764 -(% class="wikigeneratedid" %)
765 -Supported Series: HollySys LM3109/LM3107 PLC
766 -
767 -(% class="wikigeneratedid" %)
768 -**1）V-BOX setting**
769 -
770 -|(% style="width:208px" %)**Items**|(% style="width:310px" %)**Settings**|(% style="width:365px" %)**Optional**|(% style="width:152px" %)**Note**
771 -|(% style="width:208px" %)Protocol|(% style="width:310px" %)HollySys LM Modbus RTU|(% style="width:365px" %)HollySys LM Modbus RTU|(% style="width:152px" %)
772 -|(% style="width:208px" %)Connection|(% style="width:310px" %)RS232|(% style="width:365px" %)RS485|(% style="width:152px" %)
773 -|(% style="width:208px" %)Baud rate|(% style="width:310px" %)38400|(% style="width:365px" %)38400|(% style="width:152px" %)
774 -|(% style="width:208px" %)Data bit|(% style="width:310px" %)8|(% style="width:365px" %)8|(% style="width:152px" %)
775 -|(% style="width:208px" %)Parity|(% style="width:310px" %)None|(% style="width:365px" %)None|(% style="width:152px" %)
776 -|(% style="width:208px" %)Stop bit|(% style="width:310px" %)1|(% style="width:365px" %)1|(% style="width:152px" %)
777 -|(% style="width:208px" %)Device station No.|(% style="width:310px" %)1|(% style="width:365px" %)1|(% style="width:152px" %)
778 -
779 -**2）Address List**
780 -
781 -|=**Type**|=**Device registers**|=**Format**|=**Range**|=**Note**
782 -|Bit|QX|QXDDDDD.o|0~~99999.7|
783 -|Bit|IX|IXDDDDD.o|0~~99999.7|
784 -|Bit|MX|MXDDDDD.o|0~~99999.7|
785 -|Word|QW|QWDDDDD|0~~99999|
786 -|Word|IW|IWDDDDD|0~~99999|
787 -|Word|MW|MWDDDDD|0~~99999|
788 -|Word|MD|MDDDDDD|0~~99999|
789 -
790 -**Cable Wiring**
791 -
792 -RS232
793 -
794 -(% style="text-align:center" %)
795 -[[image:HollySysRS232.png]]
796 -
797 -RS485
798 -
799 -(% style="text-align:center" %)
800 -[[image:Hollysys LM Modbus RTU.gif]]
801 -
802 -= **Siemens ** =
803 -
804 -== **S7-200 Smart Ethernet ** ==
805 -
806 806  [[download link>>https://ftp.we-con.com.cn/Download/WIKI/V-BOX/Demo/%E9%80%9A%E8%AE%AF%E6%A1%88%E4%BE%8B/Communication%20with%20S7-200%20Smart.zip]]
807 807  
808 -== **S7-300 Ethernet ** ==
809 809  
435 +== **S7-300 Ethernet Protocol** ==
436 +
810 810  Supported Series: Siemens S7-300 series PLC
811 811  
812 812  **1）V-BOX setting**
... ... @@ -863,11 +863,11 @@
863 863  )))
864 864  )))
865 865  
866 -== **S7-1200 Ethernet ** ==
493 +== **S7-1200 Ethernet Protocol** ==
867 867  
868 868  [[download link>>https://ftp.we-con.com.cn/Download/WIKI/V-BOX/Demo/%E9%80%9A%E8%AE%AF%E6%A1%88%E4%BE%8B/Communicate%20with%20S7-1200%20via%20Ehernet.zip]]
869 869  
870 -== **S7-XXX Ethernet l** ==
497 +== **S7-XXX Ethernet Protocol** ==
871 871  
872 872  Supported Series: Siemens S7-400, S7-1200 and S7-1500
873 873  
... ... @@ -981,101 +981,10 @@
981 981  
982 982  [[image:image-20220824162342-2.png]]
983 983  
984 -== **LOGO Ethernet ** ==
611 += Create communication with **Mitsubishi PLC** =
985 985  
986 -Supported Series: Siemens Logo 0BA0, 0BA1 series
613 +== **FX1S，1N，2N Serial Protocol** ==
987 987  
988 -**V-BOX Settings**
989 -
990 -
991 -|**Items**|**Settings**|**Note**
992 -|Protocol|Siemens LOGO|
993 -|Connection|Ethernet|
994 -|Port No.|102|
995 -|PLC station No.|2|
996 -
997 -**Address List**
998 -
999 -
1000 -|**Number**|**Address Type**|**Data Type**|**Range**|**DB Address**|**PLC Address**
1001 -|1|RTC|Word|1-7|DB1.DBX984.0|0x001ec0
1002 -|2|VB|Byte|0-1469|DB1.DBX0.0|0x000000
1003 -|3|VD|Double Word|0-1466|DB1.DBX0.0|0x000000
1004 -|4|VW|Word|0-1468|DB1.DBX0.0|0x000000
1005 -|5|NAQ|Word|1-32|DB1.DBX1406.0|0x002bf0
1006 -|6|NAI|Word|1-64|DB1.DBX1262.0|0x002770
1007 -|7|AM|Word|1-64|DB1.DBX1118.0|0x0022f0
1008 -|8|AQ|Word|1-16|DB1.DBX1072.0|0x002180
1009 -|9|AI|Word|1-16|DB1.DBX1032.0|0x002040
1010 -|10|I|Bit|1-64|DB1.DBX1024.0|0x002000
1011 -|11|Q|Bit|1-64|DB1.DBX1064.0|0x002140
1012 -|12|M|Bit|1-112|DB1.DBX1104.0|0x002280
1013 -|13|NI|Bit|1-128|DB1.DBX1246.0|0x0026f0
1014 -|14|NQ|Bit|1-128|DB1.DBX1390.0|0x002b70
1015 -|15|V|Bit|0-14697|DB1.DBX0.0|0x000000
1016 -
1017 -**PLC Settings in LOGO Software:**
1018 -
1019 -Click [Tools]~-~-[Ethernet Connections],shown as below.
1020 -
1021 -(% style="text-align:center" %)
1022 -[[image:PIStudio.12\.PLC protocols.WebHome@12.PLC Protocol_html_8b9d2322edf89519.png]]
1023 -
1024 -Set Ethernet connection parameter. IP, Subnet Mask, shown as below.
1025 -
1026 -(% style="text-align:center" %)
1027 -[[image:PIStudio.12\.PLC protocols.WebHome@image-20221228142937-4.png]]
1028 -
1029 -**TSAP set**:The value set by local TSAP is the remote TSAP set in HMI. PLC's remote TSAP is the opposite,shown as below.
1030 -
1031 -(% style="text-align:center" %)
1032 -[[image:PIStudio.12\.PLC protocols.WebHome@image-20221228143047-5.png]]
1033 -
1034 - **Download Project**: Click "Address book" to add the IP address to be downloaded (fi."Detect" to check whether the IP address can be detected. Then click “ok”, and the system will prompt that PLC will be "STOP" mode. Click “YES” to start download.
1035 -
1036 -(% style="text-align:center" %)
1037 -[[image:PIStudio.12\.PLC protocols.WebHome@image-20221228143246-6.png]]
1038 -
1039 -**V-BOX Communication Settings**
1040 -
1041 -Set PLC IP in [IP Address] settings;
1042 -
1043 -(% style="text-align:center" %)
1044 -[[image:LldwDGntf4.png]]
1045 -
1046 -Enable V-BOX Ethernet in [Network];
1047 -
1048 -(% style="text-align:center" %)
1049 -[[image:WgvjfWbQif.png]]
1050 -
1051 -TSAP setting
1052 -
1053 -* The initialization script needs to set the source TSAP address and the target TSAP address, otherwise the communication will not be successful.
1054 -
1055 -{{code language="LUA"}}
1056 -function init.main()
1057 -addr_setword("@W_0#HSW1200",8192) -- Set the source TSAP address
1058 -addr_setword("@W_0#HSW1201",4096) -- Set the destination TSAP address
1059 -end
1060 -{{/code}}
1061 -
1062 -Note: The name of the test script is init, 8192 and 4096 are the data used for the test, there is no HSW address in the register option, but you can directly set the value of the corresponding address through the code.
1063 -
1064 -**✎Note:**
1065 -
1066 -* **Communication port configuration: **
1067 -** Continuous length needs to be set to 0.
1068 -** Integration interval needs to be set to 1. (no change may result in data errors)
1069 -** Set Port and Device Station NO.
1070 -** Other set as defaulted.
1071 -* **Notes on the use of registers:**
1072 -** Register VD: Use only registers that are multiples of 4, such as 0, 4, 8, etc.
1073 -** Register VW: Use only registers thay are multiples of 2, such as 0, 2, 4 etc. (Using an odd-length register may result in data errors, such as 2 3 4 )
1074 -
1075 -= **Mitsubishi ** =
1076 -
1077 -== **FX1S，1N，2N Serial ** ==
1078 -
1079 1079  Supported Series: Mitsubishi FX1S, FX1N, FX2N series
1080 1080  
1081 1081  **1）V-BOX Settings**
... ... @@ -1121,7 +1121,7 @@
1121 1121  [[image:image-20220825100845-4.png]]
1122 1122  
1123 1123  
1124 -== **FX3U，3G，3GA Serial ** ==
660 +== **FX3U，3G，3GA Serial Protocol** ==
1125 1125  
1126 1126  Supported Series: Mitsubishi FX3U, FX3G, FX3GA series
1127 1127  
... ... @@ -1168,11 +1168,11 @@
1168 1168  [[image:image-20220825100845-4.png]]
1169 1169  
1170 1170  
1171 -== **FX3U Ethernet ** ==
707 +== ** FX3U Ethernet Protocol** ==
1172 1172  
1173 -Supported Modules: FX3U-ENET-ADP, FX3U-ENET-L
709 +Mitsubishi FX3U series PLC
1174 1174  
1175 -**1)V-BOX Settings**
711 +**HMI Settings**
1176 1176  
1177 1177  |Items|Settings|Note
1178 1178  |Protocol|Mitsubishi FX3U|
... ... @@ -1180,7 +1180,7 @@
1180 1180  |Port No.|5009|Must be the same as the PLC setting
1181 1181  |PLC station No.|0|
1182 1182  
1183 -**2)Address List**
719 +**Address List**
1184 1184  
1185 1185  |**Type**|**Device registers**|**HMI registers**|**Format**|**Range**|**Note**
1186 1186  |(% colspan="1" rowspan="7" %)Bit|X|X|X OOO|0~~377|
... ... @@ -1196,19 +1196,19 @@
1196 1196  |SD|SD|SD DDDD|8000~~8511|
1197 1197  |R|R|R DDDDD|0~~32767|
1198 1198  
1199 -**3)Ethernet Module Settings**
735 +**Ethernet Module Settings**
1200 1200  
1201 1201  FX3U-ENET-L module configuration
1202 1202  Set up the FX3U-ENET-L Ethernet module settings as follows.
1203 1203  Select the module location, which in this document is Module 0.
1204 1204  
1205 -[[image:image-20221116105850-1.png]]
741 +[[image:image-20221115140802-1.png]]
1206 1206  
1207 1207  Select "Operational setting" to enter the following screen.
1208 1208  
1209 1209  The Ethernet module IP is set to 192.168.39.254 in this document, and other options are default.
1210 1210  
1211 -[[image:image-20221116105947-1.png]]
747 +[[image:image-20221115142728-4.png]]
1212 1212  
1213 1213  Select "Open setting" to enter the setting interface, the settings are as follows.
1214 1214  
... ... @@ -1216,7 +1216,7 @@
1216 1216  
1217 1217  Mitsubishi programming software GX works2 to communicate with the FX3U via the Ethernet module.
1218 1218  
1219 -[[image:image-20221116110802-1.png]]
755 +[[image:image-20221115142945-5.png]]
1220 1220  
1221 1221  Click on "transter setup" - "PC side I/F setting", see the following figure.
1222 1222  
... ... @@ -1224,45 +1224,42 @@
1224 1224  
1225 1225  use the IP set in the "Ethernet board" to communicate directly with the network cable.
1226 1226  
1227 -[[image:image-20221116110832-2.png||height="423" width="708"]]
763 +[[image:image-20221115143341-6.png||height="426" width="712"]]
1228 1228  
1229 1229  Read and write data from the Ethernet module
1230 1230  
1231 -[[image:image-20221116110907-3.png]]
767 +[[image:image-20221115143703-7.png]]
1232 1232  
1233 1233  Set "Transter setup" to COM communication, and read or write operation as shown below
1234 1234  
1235 -[[image:image-20221116110917-4.png]]
771 +[[image:image-20221115143809-8.png]]
1236 1236  
1237 -**4)PLC Settings (GX Works 2)**
773 +**PLC Settings (GX Works 2)**
1238 1238  
1239 1239  Create a blank FX5U project
1240 1240  
1241 1241  Find Current Connection in the navigation
1242 1242  
1243 -[[image:image-20221116111427-1.png||height="421" width="705"]]
779 +[[image:image-20221115144335-9.png||height="422" width="706"]]
1244 1244  
1245 1245  Select Connection Channel List
1246 1246  
1247 1247  Select Ethernet board communication
1248 1248  
1249 -[[image:image-20221116111451-2.png||height="421" width="705"]]
785 +[[image:image-20221115144824-10.png||height="421" width="705"]]
1250 1250  
1251 1251  Select Ethernet Module
1252 1252  Set the IP address of the PLC
1253 1253  
1254 -[[image:image-20221116111509-3.png||height="666" width="699"]]
790 +[[image:image-20221115145228-11.png||height="674" width="708"]]
1255 1255  
1256 1256  Read or write PLC data, in this document is read
1257 1257  
1258 -[[image:image-20221116111651-4.png||height="416" width="697"]]
794 +[[image:image-20221115145553-12.png||height="424" width="711"]]
1259 1259  
1260 -[[image:image-20221116111727-5.png||height="416" width="697"]]
796 +[[image:image-20221115145559-13.png||height="424" width="711"]]
1261 1261  
1262 -**4)Configure the communication protocol**
1263 1263  
1264 -[[image:image-20221119101946-2.png||height="395" width="695"]]
1265 -
1266 1266  == **FX5U Serial Protocol** ==
1267 1267  
1268 1268  Mitsubishi FX5U series PLC
... ... @@ -1417,10 +1417,11 @@
1417 1417  
1418 1418  [[image:image-20220825112403-1.png||alt="图片-20220825112403-1.png"]]
1419 1419  
1420 -**5）Cable Wiring**
953 +**5）电缆布线**
1421 1421  
1422 1422  [[image:https://docs.we-con.com.cn/bin/download/PIStudio/12.PLC%20protocols/WebHome/12.PLC%20Protocol_html_2297240b57346b2a.png?width=401&height=170&rev=1.1||alt="12.可编程逻辑控制器Protocol_html_2297240b57346b2a.png" height="170" width="401"]]
1423 1423  
957 +
1424 1424  == **L02 Serial Protocol** ==
1425 1425  
1426 1426  Mitsubishi L02 series CPU built-in serial port.
... ... @@ -1554,12 +1554,6 @@
1554 1554  
1555 1555  [[image:https://docs.we-con.com.cn/bin/download/PIStudio/12.PLC%20protocols/WebHome/12.PLC%20Protocol_html_2297240b57346b2a.png?width=401&height=170&rev=1.1||alt="12.PLC Protocol_html_2297240b57346b2a.png" height="170" width="401"]]
1556 1556  
1557 -== **Q12H Serial Protocol** ==
1558 -
1559 -This Demo shows V-BOX communicate with Q12H PLC by Q02H serial Protocol
1560 -
1561 -[[**Download link**>>https://ftp.we-con.com.cn/Download/WIKI/PI%20HMI/Demo/Communication/V-Box%20connect%20PLC%20Q12H.rar]]
1562 -
1563 1563  == **QJ71E71 Ethernet Protocol** ==
1564 1564  
1565 1565  Mitsubishi QJ71E71 Ethernet communication module;
... ... @@ -1608,13 +1608,10 @@
1608 1608  
1609 1609  * Click [Ethernet/CC IE/MELSECNET];
1610 1610  * Please select [Ethernet] as network type;
1611 -* Set station I/O number according to situation (For example, 0020 means that the module is connected to PLC CPU in first order);
1139 +* Set station I/O number according to situation (For example, 0000 means that the module is connected to PLC CPU in first order);
1612 1612  * Select [Online] as Mode;
1613 -* [[image:image-20221119171343-2.png||height="341" width="587"]]
1614 1614  * Click [Operation setting] to set IP;
1615 1615  * Select [Binary Code] as [Communication Data Code];
1616 -* [[image:image-20221119171436-3.png||height="354" width="588"]]
1617 -* Click [Open setting]
1618 1618  * Set protocol: TCP;
1619 1619  * Set [unpassive] in [Open system];
1620 1620  * Set [receive] in [Fixed buffer];
... ... @@ -1621,16 +1621,14 @@
1621 1621  * Set [procedure Exist] in [Fixed buffer communication];
1622 1622  * Disable [Pairing open];
1623 1623  * Set [No confirm] in [Existence confirmation];
1624 -* Host station port number: 5009;
1149 +* Host station port number: 1025;
1625 1625  * Save settings;
1626 -* [[image:image-20221119171611-4.png||height="354" width="588"]]
1627 1627  * Download project into PLC and restart it
1628 1628  
1629 1629  **4）Configure the communication protocol**
1630 1630  
1631 -[[image:image-20221119171832-5.png||height="354" width="625"]]
1155 +[[image:image-20220825143728-1.png]]
1632 1632  
1633 -
1634 1634  **5）Cable Wiring**
1635 1635  
1636 1636  [[image:https://docs.we-con.com.cn/bin/download/PIStudio/12.PLC%20protocols/WebHome/12.PLC%20Protocol_html_2297240b57346b2a.png?width=401&height=170&rev=1.1||alt="12.PLC Protocol_html_2297240b57346b2a.png"]]
... ... @@ -1639,105 +1639,12 @@
1639 1639  
1640 1640  == **DVP Ethernet Protocol** ==
1641 1641  
1642 -Supoort Series: DELTA DVP20/32/40/60ES200RE/200TE or any DVP models with built-in Ethernet port, DELTA DVPEN01-SL module
1165 +[[下载链接>>https://ftp.we-con.com.cn/Download/WIKI/V-BOX/Demo/%E9%80%9A%E8%AE%AF%E6%A1%88%E4%BE%8B/Delta%20DVP%20Ethernet.zip]]
1643 1643  
1644 -**1）V-BOX Settings**
1645 -
1646 -|=**Items**|=**Settings**|=**Note**
1647 -|Protocol|DELTA DVP MODBUS TCP|
1648 -|Connection|Ethernet|
1649 -|Port No.|502|
1650 -|Device No.|1|
1651 -|VBox Device No.|0|
1652 -
1653 -**2）Address List **
1654 -
1655 -|=**Type**|=(% style="width: 191px;" %)**Device registers**|=(% style="width: 217px;" %)**VBox registers**|=(% style="width: 168px;" %)**Format**|=(% style="width: 225px;" %)**Range**|=**Note**
1656 -|Bit|(% style="width:191px" %)X|(% style="width:217px" %)X|(% style="width:168px" %)X OOO|(% style="width:225px" %)0~~377|
1657 -|Bit|(% style="width:191px" %)Y|(% style="width:217px" %)Y|(% style="width:168px" %)Y OOO|(% style="width:225px" %)0~~377|
1658 -|Bit|(% style="width:191px" %)M0|(% style="width:217px" %)M0|(% style="width:168px" %)M0DDDD|(% style="width:225px" %)0~~1535|
1659 -|Bit|(% style="width:191px" %)M1|(% style="width:217px" %)M1|(% style="width:168px" %)M1DDDD|(% style="width:225px" %)1536~~4096|
1660 -|Bit|(% style="width:191px" %)T|(% style="width:217px" %)T|(% style="width:168px" %)TDDD|(% style="width:225px" %)0~~255|
1661 -|Bit|(% style="width:191px" %)C|(% style="width:217px" %)C|(% style="width:168px" %)CDDD|(% style="width:225px" %)0~~255|
1662 -|Bit|(% style="width:191px" %)S|(% style="width:217px" %)S|(% style="width:168px" %)SDDDD|(% style="width:225px" %)0~~1023|
1663 -|Word|(% style="width:191px" %)D0|(% style="width:217px" %)D0|(% style="width:168px" %)D0DDDD|(% style="width:225px" %)0~~4095|
1664 -|Word|(% style="width:191px" %)D1|(% style="width:217px" %)D1|(% style="width:168px" %)D1DDDD|(% style="width:225px" %)4096~~11999|
1665 -|Word|(% style="width:191px" %)T|(% style="width:217px" %)T|(% style="width:168px" %)TDDD|(% style="width:225px" %)0~~255|
1666 -|Word|(% style="width:191px" %)C|(% style="width:217px" %)C|(% style="width:168px" %)CDDD|(% style="width:225px" %)0~~199|
1667 -|Double Word|(% style="width:191px" %)HC|(% style="width:217px" %)HC|(% style="width:168px" %)HCDDD|(% style="width:225px" %)200~~255|
1668 -
1669 -**3) PLC Setting:**
1670 -
1671 -~1. Create new project in Delta WPL Soft, and click Setting to open the communication settings:
1672 -
1673 -(% style="text-align:center" %)
1674 -[[image:DVPEthernetWPLSoft2.png]]
1675 -
1676 -2. Set up the communication type and PLC IP:
1677 -
1678 -(% style="text-align:center" %)
1679 -[[image:DVPEthernetSetup.png]]
1680 -
1681 -(% class="wikigeneratedid" %)
1682 -3. Click OK and save the settings. Then click Communication on toolbar, then click Transfer Setup to open new window:
1683 -
1684 -(% style="text-align:center" %)
1685 -[[image:DVPEthernetTransfer.png]]
1686 -
1687 -(% class="wikigeneratedid" %)
1688 -4. Select Communication Mode as PC => PLC to download or select PC <=PLC to upload:
1689 -
1690 -(% style="text-align:center" %)
1691 -[[image:DVPEthernetPLCtoPC.png]]
1692 -
1693 -5. Click Auto-Search Ethernet Module to find the PLC on the same LAN network:
1694 -
1695 -(% style="text-align:center" %)
1696 -[[image:DVPEthernetAutoSearch.png]]
1697 -
1698 -**4) V-BOX Setting:**
1699 -
1700 -Set the same IP address according to the setting from WPL Soft:
1701 -
1702 -(% style="text-align:center" %)
1703 -[[image:DVPEthernetVNETPortocol.png]]
1704 -
1705 1705  == **DVP serial protocol** ==
1706 1706  
1707 -Supoort Series: DELTA DVP EH/ES/SS/EX/EH2/SV/SA/SC/SX
1169 +[[下载链接>>https://ftp.we-con.com.cn/Download/WIKI/V-BOX/Demo/%E9%80%9A%E8%AE%AF%E6%A1%88%E4%BE%8B/Delta%20DVP%20Ethernet.zip]]
1708 1708  
1709 -**1）V-BOX Settings**
1710 -
1711 -|=**Items**|=**Settings**|=**Note**
1712 -|Protocol|DELTA DVP PROTOCOL|
1713 -|Connection|RS232|
1714 -|Baud Rate|9600|
1715 -|Stop Bit|1|
1716 -|Data Bit|7|
1717 -|Parity|EVEN|
1718 -|Device No.|1|
1719 -
1720 -(% class="wikigeneratedid" %)
1721 -**2）Address List**
1722 -
1723 -|=**Type**|=(% style="width: 191px;" %)**Device registers**|=(% style="width: 217px;" %)**VBox registers**|=(% style="width: 168px;" %)**Format**|=(% style="width: 225px;" %)**Range**|=**Note**
1724 -|Bit|(% style="width:191px" %)X|(% style="width:217px" %)X|(% style="width:168px" %)X OOOOOO|(% style="width:225px" %)0~~303237|
1725 -|Bit|(% style="width:191px" %)Y|(% style="width:217px" %)Y|(% style="width:168px" %)Y OOOOOO|(% style="width:225px" %)0~~303237|
1726 -|Bit|(% style="width:191px" %)M|(% style="width:217px" %)M|(% style="width:168px" %)MDDDDD|(% style="width:225px" %)0~~99999|
1727 -|Bit|(% style="width:191px" %)T|(% style="width:217px" %)T|(% style="width:168px" %)TDDDDD|(% style="width:225px" %)0~~99999|
1728 -|Bit|(% style="width:191px" %)C|(% style="width:217px" %)C|(% style="width:168px" %)CDDDDD|(% style="width:225px" %)0~~99999|
1729 -|Bit|(% style="width:191px" %)S|(% style="width:217px" %)S|(% style="width:168px" %)SDDDDD|(% style="width:225px" %)0~~99999|
1730 -|Word|(% style="width:191px" %)D|(% style="width:217px" %)D|(% style="width:168px" %)D DDDDD|(% style="width:225px" %)0~~99999|
1731 -|Word|(% style="width:191px" %)T|(% style="width:217px" %)T|(% style="width:168px" %)TDDDDD|(% style="width:225px" %)0~~99999|
1732 -|Word|(% style="width:191px" %)C|(% style="width:217px" %)C|(% style="width:168px" %)CDDD|(% style="width:225px" %)0~~199|
1733 -|Double Word|(% style="width:191px" %)C|(% style="width:217px" %)C|(% style="width:168px" %)CDDDDD|(% style="width:225px" %)200~~99999|
1734 -
1735 -(% class="wikigeneratedid" %)
1736 -**3）Wiring Diagram**
1737 -
1738 -(% style="text-align:center" %)
1739 -[[image:Delta DVP PROTOCOLSerial232.png]]
1740 -
1741 1741  == **AS Ethernet Protocol** ==
1742 1742  
1743 1743  **1）V-BOX Settings**
... ... @@ -1771,6 +1771,7 @@
1771 1771  
1772 1772  **3）Configure the communication protocol**
1773 1773  
1204 +
1774 1774  [[image:image-20220831160010-4.png]]
1775 1775  
1776 1776  **4）Cable Wiring**
... ... @@ -1903,7 +1903,7 @@
1903 1903  
1904 1904  **1）V-BOX Settings**
1905 1905  
1906 -Supported Series: Xinjie XD/XE Series PLC
1337 +Supported Series: Delta Xinjie XD/XE Series PLC
1907 1907  
1908 1908  |**Item**|**Settings**|**Note**
1909 1909  |Protocol|XINJE XD/XC MODBUS|
... ... @@ -1973,6 +1973,7 @@
1973 1973  
1974 1974  [[image:https://docs.we-con.com.cn/bin/download/PIStudio/12.PLC%20protocols/WebHome/image-20220830160232-3.png?rev=1.1||alt="image-20220830160232-3.png"]]
1975 1975  
1407 +
1976 1976  = Create communication with **Schneider PLC** =
1977 1977  
1978 1978  == **Schneider MODBUS RTU** ==
... ... @@ -2206,74 +2206,6 @@
2206 2206  
2207 2207  [[image:https://docs.we-con.com.cn/bin/download/PIStudio/12.PLC%20protocols/WebHome/12.PLC%20Protocol_html_2297240b57346b2a.png?width=401&height=170&rev=1.1||alt="12.可编程逻辑控制器Protocol_html_2297240b57346b2a.png" height="170" width="401"]]
2208 2208  
2209 -= Create communication with INVT PLC =
2210 -
2211 -**1）V-BOX setting**
2212 -
2213 -|**Item**|**Settings**|**Note**
2214 -|Protocol|INVT_IVC2L|
2215 -|Connection|RS232|
2216 -|Baud rate|19200|
2217 -|Data bit|8|
2218 -|Parity|EVEN|
2219 -|Stop bit|1|
2220 -|PLC station No.|1
2221 -
2222 -**2）Address List**
2223 -
2224 -
2225 -|**Type**|**Device registers**|**Format**|**Range**|**Note**
2226 -|(% colspan="1" rowspan="7" %)Bit|X|XOOO|0~~377|
2227 -|Y|YOOO|0~~377|
2228 -|M|MDDDD|0~~1999|
2229 -|SM|SMDDD|0~~255|
2230 -|S|SDDD|0~~991|
2231 -|T|TDDD|0~~255|
2232 -|C|CDDD|0~~255|
2233 -|(% rowspan="5" %)Word|D|DDDDD|0~~7999|
2234 -|SD|SDDDD|0~~255|
2235 -|Z|ZDD|0~~15|
2236 -|T|TDDD|0~~255|
2237 -|C|CDDD|0~~199|
2238 -|Double word|C|CDDD|200~~255|
2239 -
2240 -**3）Communication Settings**
2241 -
2242 -(% style="text-align:center" %)
2243 -[[image:盒子创建英威腾.png]]
2244 -
2245 -**4）PLC software**
2246 -
2247 -(% style="text-align:center" %)
2248 -[[image:英威腾软件.png]]
2249 -
2250 -**5）PLC setting **
2251 -
2252 -Open the INVI plc software, create a new project or open a project that has already been created
2253 -
2254 -(% style="text-align:center" %)
2255 -[[image:英威腾创建1.png]]
2256 -
2257 -Configure serial port parameters.
2258 -
2259 -(% style="text-align:center" %)
2260 -[[image:英威腾创建2.png]]
2261 -
2262 -PC connect PLC
2263 -
2264 -(% style="text-align:center" %)
2265 -[[image:英威腾创建3.png]]
2266 -
2267 -Download
2268 -
2269 -(% style="text-align:center" %)
2270 -[[image:英威腾下载.png]]
2271 -
2272 -**6）Cable Wiring**
2273 -
2274 -(% style="text-align:center" %)
2275 -[[image:wire.png]]
2276 -
2277 2277  = Create communication with **Modbus ** =
2278 2278  
2279 2279  == **MODBUS RTU Slave (All function)** ==
... ... @@ -2285,86 +2285,6 @@
2285 2285  (% style="text-align:center" %)
2286 2286  [[image:1624342015914-382.png||height="486" width="800" class="img-thumbnail"]]
2287 2287  
2288 -== **Communicate with Modbus Meter** ==
2289 -
2290 -The following example is using the Linfee meter LNF96EY to demonstrate how to set up the Modbus communication.
2291 -
2292 -~1. Wiring the RS485 cable first. Because the pin 58 is A, the pin 59 is B for meter. Here we use the COM1 to connect. So the diagram like follows:
2293 -
2294 -(% style="text-align:center" %)
2295 -[[image:LinfeeTerminalDiagram.png]]
2296 -
2297 -2. Check the specific Modbus parameter in the communication menu from LED display.
2298 -
2299 -So from the following pictures, we can know the Meter Address is 85, Baud rate is 9600, CRC None.
2300 -
2301 -{{info}}
2302 -**✎Note: **Meter address usually corresponding to the Modbus Slave Station No. on the Modbus communication.
2303 -{{/info}}
2304 -
2305 -(% style="text-align:center" %)
2306 -[[image:MeterModbusAllView.png]]
2307 -
2308 -(% class="wikigeneratedid" %)
2309 -3. Set up the communication in the Configuration tab.
2310 -
2311 -(% class="wikigeneratedid" %)
2312 -Select the protocol as **ModBus RTU Slave (All Function)**. And set the communication parameters like below.
2313 -
2314 -(% style="text-align:center" %)
2315 -[[image:VNETCommunicationtabmeter.png]]
2316 -
2317 -(% class="wikigeneratedid" %)
2318 -4. Create new real-time monitoring tag accroding to Modbus manual
2319 -
2320 -(% class="wikigeneratedid" %)
2321 -Enter the address we want to read from the meter. The following table is intercept part of the manual for Linfee Modbus manual.
2322 -
2323 -(% class="wikigeneratedid" %)
2324 -**0x03/0x04 command data register address**:
2325 -
2326 -(% style="width:1142.22px" %)
2327 -|(% style="display:none" %) |=(% colspan="2" rowspan="1" style="width: 165px;" %)Address(% style="display:none" %) |=Description|=Data Format|=(% style="width: 254px;" %)Data Length(Word)|=(% style="width: 282px;" %)Remark
2328 -|(%%)(% style="display:none" %) (%%) HEX|(% style="width:107px" %)DEC|(%%)(% style="display:none" %) (%%) |(% style="width:100px" %) |(%%)(% style="display:none" %) (%%) |(% style="width:318px" %)
2329 -|(% style="width:107px" %)0x00|(% style="width:100px" %)0|Reserved| | |(% style="width:318px" %)
2330 -|(% style="width:107px" %)0x02|(% style="width:100px" %)2|Reserved| | |(% style="width:318px" %)
2331 -|(% style="width:107px" %)0x04|(% style="width:100px" %)4|Reserved| | |(% style="width:318px" %)
2332 -|(% style="width:107px" %)0x06|(% style="width:100px" %)6|Ua|float|2|(% style="width:318px" %)Phase Voltage data, Unit V
2333 -|(% style="width:107px" %)0x08|(% style="width:100px" %)8|Ub|float|2|(% style="width:318px" %)Phase Voltage data, Unit V
2334 -|(% style="width:107px" %)0x0A|(% style="width:100px" %)10|Uc|float|2|(% style="width:318px" %)Phase Voltage data, Unit V
2335 -|(% style="width:107px" %)0x0C|(% style="width:100px" %)12|Uab|float|2|(% style="width:318px" %)Line Voltage data, Unit V
2336 -|(% style="width:107px" %)0x0E|(% style="width:100px" %)14|Ubc|float|2|(% style="width:318px" %)Line Voltage data, Unit V
2337 -|(% style="width:107px" %)0x10|(% style="width:100px" %)16|Uca|float|2|(% style="width:318px" %)Line Voltage data, Unit V
2338 -|(% style="width:107px" %)0x12|(% style="width:100px" %)18|Ia|float|2|(% style="width:318px" %)Phase Current data, Unit A
2339 -|(% style="width:107px" %)0x14|(% style="width:100px" %)20|Ib|float|2|(% style="width:318px" %)Phase Current data, Unit A
2340 -|(% style="width:107px" %)0x16|(% style="width:100px" %)22|Ic|float|2|(% style="width:318px" %)Phase Current data, Unit A
2341 -
2342 -{{info}}
2343 -**✎Note: **We usually use the Data Type 4 for read the Modbus registers(Function Code 03)
2344 -{{/info}}
2345 -
2346 -For example, here we want to read the Phase Voltage Ua (Modbus offset 0006), the Modbus register main No. requires input decimal number, and check whether the actual address has one address offset, so the tag configured like the following screenshot:
2347 -
2348 -(% style="text-align:center" %)
2349 -[[image:VNETModbusTagSettings.png]]
2350 -
2351 -(% style="text-align:center" %)
2352 -[[image:VNETModbusTagByteSettings.png]]
2353 -
2354 -{{info}}
2355 -**✎Note: **If the read value is incorrect, please check whether need to change the Byte order.
2356 -{{/info}}
2357 -
2358 -Set the Modbus Slave Station No.
2359 -
2360 -(% style="text-align:center" %)
2361 -[[image:ModbusStationSettings.png]]
2362 -
2363 -If the communication is setup successfully, the tag will show green light.
2364 -
2365 -(% style="text-align:center" %)
2366 -[[image:Monitoringtaggreenlight.png]]
2367 -
2368 2368  == **MODBUS RTU Master** ==
2369 2369  
2370 2370  Select the protocol "Modbus RTU Master",
... ... @@ -2377,8 +2377,8 @@
2377 2377  **address list**
2378 2378  
2379 2379  (% class="table-bordered" %)
2380 -|=(% scope="row" %)**Type**|=**Data Type**|=**Function code and description**
2381 -|(% rowspan="11" %)Word|(% rowspan="3" %)3|04 (Read Input Registers: Read the current binary value in one or more input registers)
1664 +|**type**|**register**|**Function code and description**
1665 +|(% rowspan="11" %)词|(% rowspan="3" %)3|04 (Read Input Registers: Read the current binary value in one or more input registers)
2382 2382  |06 (write single register: write a binary value to a holding register)
2383 2383  |10 (write values to multiple addresses )
2384 2384  |(% rowspan="3" %)4|03 (read holding register: read current binary value in one or more holding registers)
... ... @@ -2417,7 +2417,7 @@
2417 2417  
2418 2418  **2）Address List**
2419 2419  
2420 -|=**Type**|=**Data Type**|=**Function code & Description**
1704 +|**Type**|**Register**|**Function code & Description**
2421 2421  |(% rowspan="11" %)Word|(% rowspan="3" %)3|04 (read input register: read current binary value in one or more input registers)
2422 2422  |06 (write single register: write a binary value to a holding register)
2423 2423  |10 (write values to multiple addresses )
0Il1q9GZgk.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Bob
Size
... ... @@ -1,1 +1,0 @@
1 -24.6 KB
Content
1679563870401-671.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Hunter
Size
... ... @@ -1,1 +1,0 @@
1 -39.3 KB
Content
1682233464031-639.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.AiXia
Size
... ... @@ -1,1 +1,0 @@
1 -15.9 KB
Content
AB.gif
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Hunter
Size
... ... @@ -1,1 +1,0 @@
1 -7.3 KB
Content
ABRS232.gif
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Hunter
Size
... ... @@ -1,1 +1,0 @@
1 -7.3 KB
Content
CCW.Shell_E5Cwj4tUL3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.AiXia
Size
... ... @@ -1,1 +1,0 @@
1 -27.1 KB
Content
ControlStarCommunicate.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Hunter
Size
... ... @@ -1,1 +1,0 @@
1 -26.0 KB
Content
ControlStarModbus.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Hunter
Size
... ... @@ -1,1 +1,0 @@
1 -24.9 KB
Content
ControlStarSystemBlock.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Hunter
Size
... ... @@ -1,1 +1,0 @@
1 -46.3 KB
Content
CrouzetRS232 VBox.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Hunter
Size
... ... @@ -1,1 +1,0 @@
1 -14.9 KB
Content
DVPEthernetAutoSearch.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Hunter
Size
... ... @@ -1,1 +1,0 @@
1 -43.6 KB
Content
DVPEthernetPLCtoPC.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Hunter
Size
... ... @@ -1,1 +1,0 @@
1 -8.9 KB
Content
DVPEthernetSetup.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Hunter
Size
... ... @@ -1,1 +1,0 @@
1 -19.9 KB
Content
DVPEthernetTransfer.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Hunter
Size
... ... @@ -1,1 +1,0 @@
1 -59.9 KB
Content
DVPEthernetVNETPortocol.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Hunter
Size
... ... @@ -1,1 +1,0 @@
1 -21.4 KB
Content
DVPEthernetWPLSoft.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Hunter
Size
... ... @@ -1,1 +1,0 @@
1 -97.5 KB
Content
DVPEthernetWPLSoft2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Hunter
Size
... ... @@ -1,1 +1,0 @@
1 -45.2 KB
Content
Delta DVP PROTOCOLSerial232.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Hunter
Size
... ... @@ -1,1 +1,0 @@
1 -10.7 KB
Content
Emerson.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Hunter
Size
... ... @@ -1,1 +1,0 @@
1 -13.7 KB
Content
Ethernet.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.AiXia
Size
... ... @@ -1,1 +1,0 @@
1 -45.5 KB
Content
HollySysRS232.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Hunter
Size
... ... @@ -1,1 +1,0 @@
1 -10.4 KB
Content
Hollysys LM Modbus RTU.gif
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Hunter
Size
... ... @@ -1,1 +1,0 @@
1 -7.1 KB
Content
Hollysys485-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Hunter
Size
... ... @@ -1,1 +1,0 @@
1 -13.5 KB
Content
Hollysys485box.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Hunter
Size
... ... @@ -1,1 +1,0 @@
1 -13.4 KB
Content
LinfeeTerminalDiagram.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Hunter
Size
... ... @@ -1,1 +1,0 @@
1 -8.6 KB
Content
LldwDGntf4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Bob
Size
... ... @@ -1,1 +1,0 @@
1 -24.3 KB
Content
MeterModbusAddr.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Hunter
Size
... ... @@ -1,1 +1,0 @@
1 -562.5 KB
Content
MeterModbusAllView.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Hunter
Size
... ... @@ -1,1 +1,0 @@
1 -1.6 MB
Content
MeterModbusBaud.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Hunter
Size
... ... @@ -1,1 +1,0 @@
1 -444.0 KB
Content
MeterModbusPara.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Hunter
Size
... ... @@ -1,1 +1,0 @@
1 -532.0 KB
Content
ModbusStationSettings.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Hunter
Size
... ... @@ -1,1 +1,0 @@
1 -35.8 KB
Content
Monitoringtaggreenlight.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Hunter
Size
... ... @@ -1,1 +1,0 @@
1 -7.5 KB
Content
V-NET_Client setting.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.AiXia
Size
... ... @@ -1,1 +1,0 @@
1 -41.9 KB
Content
V-NET_Client_ADD.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.AiXia
Size
... ... @@ -1,1 +1,0 @@
1 -51.4 KB
Content
V-NET_Client_KOR0AHEA4M.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.AiXia
Size
... ... @@ -1,1 +1,0 @@
1 -14.2 KB
Content
V-NET_Client_TIiAymnjkx.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.AiXia
Size
... ... @@ -1,1 +1,0 @@
1 -12.8 KB
Content
V-NET_Client_TNBuqy7T5r.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.AiXia
Size
... ... @@ -1,1 +1,0 @@
1 -26.7 KB
Content
V-NET_Client_communication.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.AiXia
Size
... ... @@ -1,1 +1,0 @@
1 -25.5 KB
Content
V-NET_Client_iKKKhcgxm1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.AiXia
Size
... ... @@ -1,1 +1,0 @@
1 -35.9 KB
Content
V-NET_Client_t2Rg2wpSoY.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.AiXia
Size
... ... @@ -1,1 +1,0 @@
1 -53.7 KB
Content
VNETCommunicationtabmeter.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Hunter
Size
... ... @@ -1,1 +1,0 @@
1 -31.0 KB
Content
VNETModbusTagByteSettings.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Hunter
Size
... ... @@ -1,1 +1,0 @@
1 -31.2 KB
Content
VNETModbusTagSettings.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Hunter
Size
... ... @@ -1,1 +1,0 @@
1 -35.7 KB
Content
WgvjfWbQif.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Bob
Size
... ... @@ -1,1 +1,0 @@
1 -36.3 KB
Content
conne ab plc.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.AiXia
Size
... ... @@ -1,1 +1,0 @@
1 -43.1 KB
Content
export.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.AiXia
Size
... ... @@ -1,1 +1,0 @@
1 -115.2 KB
Content
export1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.AiXia
Size
... ... @@ -1,1 +1,0 @@
1 -115.2 KB
Content
image-20221116105850-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Bob
Size
... ... @@ -1,1 +1,0 @@
1 -18.9 KB
Content
image-20221116105947-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Bob
Size
... ... @@ -1,1 +1,0 @@
1 -18.7 KB
Content
image-20221116110802-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Bob
Size
... ... @@ -1,1 +1,0 @@
1 -16.4 KB
Content
image-20221116110832-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Bob
Size
... ... @@ -1,1 +1,0 @@
1 -42.2 KB
Content
image-20221116110907-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Bob
Size
... ... @@ -1,1 +1,0 @@
1 -17.8 KB
Content
image-20221116110917-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Bob
Size
... ... @@ -1,1 +1,0 @@
1 -23.2 KB
Content
image-20221116111427-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Bob
Size
... ... @@ -1,1 +1,0 @@
1 -63.4 KB
Content
image-20221116111451-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Bob
Size
... ... @@ -1,1 +1,0 @@
1 -225.5 KB
Content
image-20221116111509-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Bob
Size
... ... @@ -1,1 +1,0 @@
1 -34.1 KB
Content
image-20221116111651-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Bob
Size
... ... @@ -1,1 +1,0 @@
1 -74.3 KB
Content
image-20221116111727-5.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Bob
Size
... ... @@ -1,1 +1,0 @@
1 -106.2 KB
Content
image-20221116114106-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Bob
Size
... ... @@ -1,1 +1,0 @@
1 -99.5 KB
Content
image-20221119101759-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Bob
Size
... ... @@ -1,1 +1,0 @@
1 -62.1 KB
Content
image-20221119101946-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Bob
Size
... ... @@ -1,1 +1,0 @@
1 -68.7 KB
Content
image-20221119171318-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Bob
Size
... ... @@ -1,1 +1,0 @@
1 -90.3 KB
Content
image-20221119171343-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Bob
Size
... ... @@ -1,1 +1,0 @@
1 -90.3 KB
Content
image-20221119171436-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Bob
Size
... ... @@ -1,1 +1,0 @@
1 -43.4 KB
Content
image-20221119171611-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Bob
Size
... ... @@ -1,1 +1,0 @@
1 -23.1 KB
Content
image-20221119171832-5.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Bob
Size
... ... @@ -1,1 +1,0 @@
1 -69.6 KB
Content
plc 软件.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.AiXia
Size
... ... @@ -1,1 +1,0 @@
1 -106.8 KB
Content
project create.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.AiXia
Size
... ... @@ -1,1 +1,0 @@
1 -65.5 KB
Content
software.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.AiXia
Size
... ... @@ -1,1 +1,0 @@
1 -25.8 KB
Content
v-net client vers.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.AiXia
Size
... ... @@ -1,1 +1,0 @@
1 -13.1 KB
Content
wire.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.AiXia
Size
... ... @@ -1,1 +1,0 @@
1 -137.2 KB
Content
企业微信截图_16889606174191.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.AiXia
Size
... ... @@ -1,1 +1,0 @@
1 -20.7 KB
Content
盒子创建英威腾.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.AiXia
Size
... ... @@ -1,1 +1,0 @@
1 -86.5 KB
Content
英威腾下载.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.AiXia
Size
... ... @@ -1,1 +1,0 @@
1 -49.0 KB
Content
英威腾创建1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.AiXia
Size
... ... @@ -1,1 +1,0 @@
1 -36.7 KB
Content
英威腾创建2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.AiXia
Size
... ... @@ -1,1 +1,0 @@
1 -115.7 KB
Content
英威腾创建3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.AiXia
Size
... ... @@ -1,1 +1,0 @@
1 -76.6 KB
Content
英威腾软件.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.AiXia
Size
... ... @@ -1,1 +1,0 @@
1 -52.6 KB
Content