Skip to Content

Changes for page LX6V-4PT

Last modified by Iris on 2026/03/24 15:34
From version 4.1
edited by Iris
on 2025/10/30 10:04
Change comment: There is no comment for this version
To version 13.1
edited by Iris
on 2026/01/12 16:42
Change comment: There is no comment for this version

Summary

Details

Page properties
Content
... ... @@ -1,7 +1,8 @@
1 -= **Introduction** =
1 += **1 Introduction** =
2 2  
3 +(% style="text-align:center" %)
4 +[[image:1761790581619-130.png||height="397" width="397"]]
3 3  
4 -
5 5  LX6V-4PT (4-channal analog inputs), used for the acquisition of thermocouple input analog signals. Suitable for Wecon LX6 series PLC and LX6V-EM□-ECAT coupler.
6 6  
7 7  LX6V-EM□-ECAT firmware version that supports this module: V2.022 and above, the corresponding XML version: 1.3 and above.
... ... @@ -8,59 +8,69 @@
8 8  
9 9  Upper computer software version that supports this module: 2.6. 236 and above, PLC firmware version:2.321. 1032 and above.
10 10  
11 -
12 12  **✎Note: **The total power of expansion modules connected to LX6 series PLC and LX6V-EM□-ECAT cannot be greater than 48W.
13 13  
14 -1. **Appearance and terminal description**
15 -11. **Appearance and size**
14 += **2 Appearance and terminal description** =
16 16  
16 +== **2.1 ​​​​​Appearance and size** ==
17 17  
18 +(% style="text-align:center" %)
19 +[[image:1761790728530-525.png]]
18 18  
19 -[[image:file:///C:\Users\Administrator\AppData\Local\Temp\ksohtml8120\wps5.png]]
21 +① LED; ② Terminal; ③ Expansion module interface; ④ Mounting hole: 2 places (Φ4.5); ⑤ DIN rail buckle.
20 20  
21 -① LED; ② Terminal; ③ Expansion module interface; ④ Mounting hole: 2 places (Φ4.5);
23 +== **2.2 Terminal description** ==
22 22  
23 -⑤ DIN rail buckle.
24 -
25 -
26 -1.
27 -11. **Terminal description**
28 -
29 29  The 4PT expansion module terminal are arranged as follows:
30 30  
27 +(% style="margin-left:auto; margin-right:auto" %)
28 +|=(((
29 +**Module model**
30 +)))|=(% colspan="2" rowspan="1" %)(((
31 +**Terminal arrangement**
32 +)))
33 +|=(((
34 +LX6V-4PT
35 +)))|(((
36 +(% style="text-align:center" %)
37 +[[image:1761790846633-145.png]]
38 +)))|(((
39 +(% style="text-align:center" %)
40 +[[image:1761790839326-892.png]]
41 +)))
31 31  
32 -|**Module model**|(% colspan="2" %)**Terminal arrangement**
33 -|LX6V-4PT| |[[image:file:///C:\Users\Administrator\AppData\Local\Temp\ksohtml8120\wps7.png]]
43 +== **2.3** **Installation** ==
34 34  
45 +Please install the end cover on the right side of the last expansion module, align it with the module interface slot and connect it, as shown in the figure below:
35 35  
47 +(% style="text-align:center" %)
48 +[[image:图片7.png||height="303" width="577"]]
36 36  
37 -1.
38 -11. **Installation**
50 +== **2.4** **Wiring instruction diagram** ==
39 39  
40 -Please install the end cover on the right side of the last expansion module, align it with the module interface slot and connect it, as shown in the figure below:
52 +When using the 4PT expansion module, the wiring method of the sensor is as shown in the following diagrams:
41 41  
42 -[[image:file:///C:\Users\Administrator\AppData\Local\Temp\ksohtml8120\wps8.png]]
54 +[[image:1768207221500-618.png]]
43 43  
56 +== **2.5 Indicator** ==
44 44  
45 -1.
46 -11. **Indicator**
47 -
48 48  The 4PT expansion module LED is shown below:
49 49  
50 -|**Indicator**|**Description**
51 -|PWR|(((
60 +(% style="margin-left:auto; margin-right:auto" %)
61 +|=**Indicator**|=**Description**
62 +|=PWR|(((
52 52  Power indicator
53 53  
54 54  1. Lights on: The module is powered on normally
55 55  1. Lights out: The module is not powered on or the module is abnormal
56 56  )))
57 -|LINK|(((
68 +|=LINK|(((
58 58  Communication indicator
59 59  
60 60  1. Lights on: Data interaction is normal
61 61  1. Lights out: Data interaction is abnormal or stopped
62 62  )))
63 -|L1+/L2+/L3+/L4 +|(((
74 +|=L1+/L2+/L3+/L4 +|(((
64 64  Channel indicator
65 65  
66 66  1. Lights on: Channel enable
... ... @@ -68,50 +68,45 @@
68 68  1. Slow flash: Channel not calibrated
69 69  1. Fast flash: Channel abnormal (refer to status code for details)
70 70  )))
71 -|L1-/L2-/L3-/L4-|N/A
72 -|I1+/I2+/I3+/I4 +|N/A
82 +|=L1-/L2-/L3-/L4-|(% style="text-align:center" %)N/A
83 +|=I1+/I2+/I3+/I4 +|(% style="text-align:center" %)N/A
73 73  
85 += **3 Parameter Specification** =
74 74  
87 +== **3.1 Input Specification** ==
75 75  
89 +(% style="margin-left:auto; margin-right:auto" %)
90 +|=**Item**|=**Description**
91 +|=Input channel|(% style="text-align:center" %)4
92 +|=Digital resolution|(% style="text-align:center" %)16 bit
93 +|=Sensitivity|(% style="text-align:center" %)0.01℃, 0.01℉
94 +|=Input terminal|(% style="text-align:center" %)Thermocouple input
95 +|=Sensor type|(% style="text-align:center" %)PT100, PT1000, CU50
96 +|=Accuracy (normal temperature 25℃)|(% style="text-align:center" %)Full range ± 0.2%
97 +|=Accuracy (working temperature -20℃ to 55℃)|(% style="text-align:center" %)Full range ± 0. 3%
98 +|=Isolation or not|(% style="text-align:center" %)I/O terminals are isolated from power supply, channels are not isolated
99 +|=Overlimit and disconnection detection|(% style="text-align:center" %)Support
100 +|=Power consumption|(% style="text-align:center" %)< 1.1W
101 +|=Power supply|(% style="text-align:center" %)Power supply via interface, DC24V±10%, 40mA
76 76  
77 -1. **Parameter Specification**
78 -11. **Input Specification**
103 +== **3.2 Environmental specification** ==
79 79  
80 -|**Item**|**Description**
81 -|Input channel|4
82 -|Digital resolution|16 bit
83 -|Sensitivity|0.01℃, 0.01℉
84 -|Input terminal|Thermocouple input
85 -|Sensor type|PT100, PT1000, CU50
86 -|Accuracy (normal temperature 25℃)|Full range ± 0.2%
87 -|Accuracy (working temperature -20℃ to 55℃)|Full range ± 0. 3%
88 -|Isolation or not|I/O terminals are isolated from power supply, channels are not isolated
89 -|Overlimit disconnection detection|Support
90 -|Power consumption|< 1.1W
91 -|Power supply|Power supply via interface, DC24V±10%, 40mA
92 -
93 -
94 -
95 -1.
96 -11. **Environmental specification**
97 -11.
98 -**Software Specifications**
99 -
100 -|**Item**|(% colspan="5" %)**Specification**
101 -|Usage environment|(% colspan="5" %)No corrosive, combustible gas, no large amount of conductive dust
102 -|Environment temperature|(% colspan="5" %)(((
105 +(% style="margin-left:auto; margin-right:auto" %)
106 +|=**Item**|=(% colspan="5" %)**Specification**
107 +|=Usage environment|(% colspan="5" style="text-align:center" %)No corrosive, combustible gas, no large amount of conductive dust
108 +|=Environment temperature|(% colspan="5" style="text-align:center" %)(((
103 103  Working temperature: 0℃ to 55℃
104 104  
105 105  Storage temperature: -20℃ to 70℃
106 106  )))
107 -|Environment humidity|(% colspan="5" %)(((
113 +|=(% style="text-align: center;" %)Environment humidity|(% colspan="5" style="text-align:center" %)(((
108 108  Working humidity: 10% to 90%RH (no condensation)
109 109  
110 110  Storage humidity: ≤ 90% RH (no condensation)
111 111  )))
112 -|Installation|(% colspan="5" %)Snap mount on DIN46277 (width 35mm) rail or direct positioning hole mount
113 -|(% rowspan="6" %)Vibration resistance|(% colspan="5" %)According to JISC0040 standard
114 -|Installation|Frequency|Acceleration|Amplitude|(% rowspan="5" %)(((
118 +|=Installation|(% colspan="5" style="text-align:center" %)Snap mount on DIN46277 (width 35mm) rail or direct positioning hole mount
119 +|=(% rowspan="6" %)Vibration resistance|(% colspan="5" style="text-align:center" %)According to JISC0040 standard
120 +|=Installation|(% style="text-align:center" %)Frequency|(% style="text-align:center" %)Acceleration|(% style="text-align:center" %)Amplitude|(% rowspan="5" %)(((
115 115  X, Y, Z
116 116  
117 117  10 times in each of three directions
... ... @@ -118,58 +118,56 @@
118 118  
119 119  (80 minutes in each direction)
120 120  )))
121 -|(% rowspan="2" %)DIN rail installation|10 to 57Hz|~-~-|0.035mm
122 -|57 to 150Hz|4.9m/S^^2^^|~-~-
123 -|(% rowspan="2" %)Direct installation|10 to 57Hz|~-~-|0.075mm
124 -|57 to 150Hz|9.8m/S^^2^^|~-~-
125 -|Shock resistance|(% colspan="5" %)(((
127 +|=(% rowspan="2" %)DIN rail installation|(% style="text-align:center" %)10 to 57Hz|(% style="text-align:center" %)~-~-|(% style="text-align:center" %)0.035mm
128 +|=(% style="text-align: center;" %)57 to 150Hz|(% style="text-align:center" %)4.9m/S^^2^^|(% style="text-align:center" %)~-~-
129 +|=(% rowspan="2" %)Direct installation|(% style="text-align:center" %)10 to 57Hz|(% style="text-align:center" %)~-~-|(% style="text-align:center" %)0.075mm
130 +|=(% style="text-align: center;" %)57 to 150Hz|(% style="text-align:center" %)9.8m/S^^2^^|(% style="text-align:center" %)~-~-
131 +|=Shock resistance|(% colspan="5" %)(((
126 126  Compliant with JISC0041 standard
127 127  
128 128  (147 m/S^^2^^, action time 11ms, three sinusoidal half-wave pulses in each of X, Y, and Z directions)
129 129  )))
130 -|EMC immunity level|(% colspan="5" %)Zone B (per IEC 61131-2)
131 -|Altitude requirements|(% colspan="5" %)≤2000m (80 kPa)
132 -|Protection level|(% colspan="5" %)IP20
133 -|Grounding|(% colspan="5" %)Not co-located with the strong current system
136 +|=EMC immunity level|(% colspan="5" style="text-align:center" %)Zone B (per IEC 61131-2)
137 +|=Altitude requirements|(% colspan="5" style="text-align:center" %)≤2000m (80 kPa)
138 +|=Protection level|(% colspan="5" style="text-align:center" %)IP20
139 +|=Grounding|(% colspan="5" style="text-align:center" %)Not co-located with the strong current system
134 134  
135 -|**Item**|**Specification**
136 -|Input PDO data volume|Maximum 24 byte
137 -|Diagnostic reporting function configuration|Support
138 -|Diagnostic detection enable configuration|Support overlimit and disconnection detection
139 -|Sensor type configuration|(((
141 +== **3.3 Software Specifications** ==
142 +
143 +|(% style="text-align:center" %)**Item**|(% style="text-align:center" %)**Specification**
144 +|(% style="text-align:center" %)Input PDO data volume|(% style="text-align:center" %)Maximum 24 byte
145 +|(% style="text-align:center" %)Diagnostic reporting function configuration|(% style="text-align:center" %)Support
146 +|(% style="text-align:center" %)Diagnostic detection enable configuration|(% style="text-align:center" %)Support overlimit and disconnection detection
147 +|(% style="text-align:center" %)Sensor type configuration|(% style="text-align:center" %)(((
140 140  Support thermal resistor type: PT100, PT1000, CU50, default is
141 141  
142 142  PT100 thermal resistance
143 143  )))
144 -|Filter time|0s to 100s (can be configured by software, default 5s)
145 -|Overflow detection|Support
146 -|Overlimit detection enable configuration|Support
147 -|Independent channel configuration|Support
148 -|Temperature offset enable configuration|Support
149 -|Temperature offset configuration range|-300 to +300, temperature unit
150 -|Display mode|Celsius (℃), Fahrenheit (℉)
151 -|Display sensitivity|0.01℃, 0.01℉
152 -|Sample refresh|Refresh asynchronously according to the sampling time, do not require synchronization refresh according to the bus cycle
153 -|Stop mode|Output according to the maximum value, no more refresh
154 -|Disconnected or overlimit|Output according to the maximum value, no more refresh
155 -|System diagnostics|System power abnormality
156 -|Channel diagnosis|Over upper limit alarm, over lower limit alarm, disconnection alarm, overflow alarm
157 -|Configuration diagnostics|Configuration error identification, channel parameter configuration error
152 +|(% style="text-align:center" %)Filter time|(% style="text-align:center" %)0s to 100s (can be configured by software, default 5s)
153 +|(% style="text-align:center" %)Overflow detection|(% style="text-align:center" %)Support
154 +|(% style="text-align:center" %)Overlimit detection enable configuration|(% style="text-align:center" %)Support
155 +|(% style="text-align:center" %)Independent channel configuration|(% style="text-align:center" %)Support
156 +|(% style="text-align:center" %)Temperature offset enable configuration|(% style="text-align:center" %)Support
157 +|(% style="text-align:center" %)Temperature offset configuration range|(% style="text-align:center" %)-300 to +300, temperature unit
158 +|(% style="text-align:center" %)Display mode|(% style="text-align:center" %)Celsius (℃), Fahrenheit (℉)
159 +|(% style="text-align:center" %)Display sensitivity|(% style="text-align:center" %)0.01℃, 0.01℉
160 +|(% style="text-align:center" %)Sample refresh|(% style="text-align:center" %)Refresh asynchronously according to the sampling time, do not require synchronization refresh according to the bus cycle
161 +|(% style="text-align:center" %)Stop mode|(% style="text-align:center" %)Output according to the maximum value, no more refresh
162 +|(% style="text-align:center" %)Disconnected or overlimit|(% style="text-align:center" %)Output according to the maximum value, no more refresh
163 +|(% style="text-align:center" %)System diagnostics|(% style="text-align:center" %)System power abnormality
164 +|(% style="text-align:center" %)Channel diagnosis|(% style="text-align:center" %)Over upper limit alarm, over lower limit alarm, disconnection alarm, overflow alarm
165 +|(% style="text-align:center" %)Configuration diagnostics|(% style="text-align:center" %)Configuration error identification, channel parameter configuration error
158 158  
167 +== **3.4 Accuracy calculation** ==
159 159  
160 -
161 -
162 -1.
163 -11. **Accuracy calculation**
164 -
165 165  Within the working temperature range, when the temperature change rate is less than 0.3°C/min, the accuracy of this product = ADC sampling accuracy + line resistance error + contact impedance error. According to the measure principle, it is necessary to wait for the module to be powered on for 45 minutes before measuring.
166 166  
167 -|**Sensor type**|**Detection range**|**Accuracy**
168 -|PT100|(((
171 +|(% style="text-align:center" %)**Sensor type**|(% style="text-align:center" %)**Detection range**|(% style="text-align:center" %)**Accuracy**
172 +|(% style="text-align:center" %)PT100|(% style="text-align:center" %)(((
169 169  -200.0℃ to +850.0℃，
170 170  
171 171  -328.0℉ to +1562.0℉
172 -)))|(((
176 +)))|(% style="text-align:center" %)(((
173 173  T < 300°C: ±0.6℃
174 174  
175 175  300℃ ≤ T ≤ 700℃: ±1.4℃
... ... @@ -176,11 +176,11 @@
176 176  
177 177  T > 700°C: ±1.7℃
178 178  )))
179 -|PT1000|(((
183 +|(% style="text-align:center" %)PT1000|(% style="text-align:center" %)(((
180 180  -200.0℃ to +850.0℃，
181 181  
182 182  -328.0℉ to +1562.0℉
183 -)))|(((
187 +)))|(% style="text-align:center" %)(((
184 184  T < 300°C: ±0.6℃
185 185  
186 186  300℃ ≤ T ≤ 700℃: ±1.4℃
... ... @@ -187,8 +187,299 @@
187 187  
188 188  T > 700 °C: ±1.7℃
189 189  )))
190 -|CU50|(((
194 +|(% style="text-align:center" %)CU50|(% style="text-align:center" %)(((
191 191  -50.0℃ to + 150.0℃，
192 192  
193 193  -58.0℉ to +302.0℉
194 -)))|-50℃ ≤ T ≤ 150℃: ±0.3℃
198 +)))|(% style="text-align:center" %)-50℃ ≤ T ≤ 150℃: ±0.3℃
199 +
200 += **4 Usage** =
201 +
202 +This module is suitable for Wecon LX6 series PLC and LX6V-EM□-ECAT coupler. The two usage methods are as follow.
203 +
204 +== **4.1 Use on LX6V/LX6S** ==
205 +
206 +(% style="text-align:center" %)
207 +[[image:图片8.png||height="381" width="632"]]
208 +
209 +**(1 ) Add Module**
210 +
211 +Steps:
212 +
213 +① Double-click the expansion module configuration to open the configuration interface;
214 +
215 +② In the module list, select LX6V-4PT and double-click to add a module;
216 +
217 +③ Double-click the module in the current machine slot to open the parameter configuration interface;
218 +
219 +(% style="text-align:center" %)
220 +[[image:图片1.png]]
221 +
222 +**(2) Configuration module**
223 +
224 +**~ 1) General configuration**
225 +
226 +(% style="text-align:center" %)
227 +[[image:1761790435591-998.jpeg]]
228 +
229 +① Temperature unit: Set the temperature unit for the module output. The supported temperature unit types are Celsius (℃) or Fahrenheit (℉), the default unit is: Celsius;
230 +
231 +② Power frequency suppression: It can eliminate or reduce electromagnetic interference from the power system frequency (50Hz or 60Hz) on electronic equipment, especially signal acquisition systems. The power frequency suppression can be set to the module according to the actual application scenario.
232 +
233 +**~ 2) Channel configuration**
234 +
235 +(% style="text-align:center" %)
236 +[[image:1761790435593-675.jpeg]]
237 +
238 +① Enable channels: It can be set whether to enable the current expansion module channel;
239 +
240 +② Sensor type: Set the sensor type connected to the module channel, the default sensor type is PT100, there are three sensor types supported by the PT module, which are: PT100, PT1000, CU50;
241 +
242 +③ Filtering time: The supported filtering time is 0 to 100s, it is used to reduce fluctuations in channel temperature data. The default filtering time is 5s. Please choose the appropriate filtering time according to the requirements of actual application scenarios for channel output data;
243 +
244 +④ Enable overlimit detection: Channel temperature data overlimit judgment switch, when overlimit detection is enabled, the upper and lower limits of temperature can be set. When the temperature output by the channel is greater than the upper limit of temperature or less than the lower limit of temperature, the state of this channel will output a channel overlimit warning;
245 +
246 +⑤ Enable temperature offset: Channel temperature data offset enable switch. When temperature offset is enabled, the output temperature data of the channel will be offset;
247 +
248 +**~ 3) I/O mapping**
249 +
250 +By default, channels are mapped to R device according to the number of current module channels. The figure below maps modules CH1 ~~ CH12 to R0 ~~ R11 device. The data type of temperature value of channel is REAL. If want to display the temperature value of channel 1, the temperature value can be viewed after assigning a variable using the DEMOV instruction.
251 +
252 +(% style="text-align:center" %)
253 +[[image:1761790435595-524.jpeg||height="638" width="806"]]
254 +
255 +Supported status codes:
256 +
257 +* 0x00: Channel normal;
258 +* 0x40: Channel disconnection;
259 +* 0x41: Channel overflow;
260 +* 0x42: Channel overrun;
261 +
262 +**(3) Download configuration**
263 +
264 +After the module configuration is completed and the program is compiled correctly, the project can be downloaded (at present, it is not supported to download the extension module configuration separately). Before downloading, make sure that the connected expansion module model and configuration model are in the same order. Otherwise, the PLC will report an error and stop running.
265 +
266 +(% style="text-align:center" %)
267 +[[image:图片2.png]]
268 +
269 +== **4.2 Used on LX6V-EM□-ECAT coupler** ==
270 +
271 +(% style="text-align:center" %)
272 +[[image:1761791932607-101.png]]
273 +
274 +**(1) First  add EtherCAT device**
275 +
276 +According to steps ① to ④ in the figure below, right-click EtherCAT, and click [New]->[Import] to import the ESI device description file of the device;
277 +
278 +(% style="text-align:center" %)
279 +[[image:图片3.png]]
280 +
281 +After the import is completed, select the coupler according to the module model and location connected to PLC. (the figure below takes LX6V-EMB-ECAT as an example);
282 +
283 +(% style="text-align:center" %)
284 +[[image:1761790435610-644.jpeg]]
285 +
286 +**(2) Configuration module**
287 +
288 +Right-click the currently added coupler to add the expansion module mounted to the current coupler.
289 +
290 +(% style="text-align:center" %)
291 +[[image:图片4.png]]
292 +
293 +**✎Note: **When the configuration module is inconsistent with the actual mounted module, an error will be reported that the OP cannot be successful.
294 +
295 +**(3) Start configuration**
296 +
297 +(% style="text-align:center" %)
298 +[[image:图片5.png||alt="1761790435644-648.jpeg"]]
299 +
300 +
301 +(% style="text-align:center" %)
302 +[[image:图片6.png]]
303 +
304 +① PT module temperature unit: Set the temperature unit for the module output. The supported temperature unit types are Celsius (℃) or Fahrenheit (℉), the default unit is: Celsius;
305 +
306 +0: Degree Celsius (℃);
307 +
308 +Others: Degree Fahrenheit (℉)
309 +
310 +② PT module power frequency support: Set the power frequency suppression of the module to suppress 50Hz or suppress 60Hz, and the default suppression is 50Hz;
311 +
312 +0: Suppress 50 Hz;
313 +
314 +Others: Suppress 60 Hz;
315 +
316 +③ reserve: Reserve
317 +
318 +④ CHx sensor type: Set the type of sensor external to the channel;
319 +
320 +Supported sensor types:
321 +
322 +0: Disable
323 +
324 +1: PT100;
325 +
326 +3: PT1000
327 +
328 +4: CU50;
329 +
330 +⑤ CHx filter time: Used to specify the filtering time of the current channel. The supported filtering time is 0 to 100s, it is used to reduce the fluctuation of channel temperature data. The default filtering time is 5s;
331 +
332 +⑥ CHx over limit detection: Overlimit detection enable configuration, 0: Overlimit detection detection is not enabled, others: Enable overlimit detection
333 +
334 +⑦ CHx temperature upper limit: The upper limit value of the channel overlimit detection temperature;
335 +
336 +⑧ CHx temperature lower limit: The lower limit value of the channel overlimit detection temperature;
337 +
338 +⑨ CHx temperature offset: The offset of channel data, supported offset range:-300 to +300；
339 +
340 +**I/O mapping**
341 +
342 +The temperature and state of the module can be mapped to variables/device. For example, the following figure maps the temperature values of the CH0 to CH3 channels to the D0 to D7 device, and the status codes of the CH0 to CH3 channels to the D8 to D11 device.
343 +
344 +(% style="text-align:center" %)
345 +[[image:1761790435666-763.jpeg]]
346 +
347 +Click save configuration and download the configuration to PLC.
348 +
349 += **5 Object dictionary** =
350 +
351 +|(% style="text-align:center; width:77px" %)(((
352 +**Index**
353 +
354 +**（16#）**
355 +)))|(% style="text-align:center; width:142px" %)(((
356 +**Sub-index**
357 +
358 +**（16#）**
359 +)))|(% style="text-align:center; width:288px" %)**Description**|(% style="text-align:center" %)(((
360 +**Data**
361 +
362 +**Type**
363 +)))|(% style="text-align:center" %)**Range**|(% style="text-align:center" %)**Read-write support**|(% style="text-align:center" %)**Unit**|(% style="text-align:center" %)**Default**|(% style="text-align:center" %)**Name**
364 +|(% rowspan="5" style="text-align:center; width:77px" %)8000|(% style="text-align:center; width:142px" %)01|(% style="width:288px" %)(((
365 +PT module temperature unit
366 +
367 +0: Degree Celsius (℃)
368 +
369 +Others: Degrees Fahrenheit (℉)
370 +)))|(% style="text-align:center" %)UINT8|(% style="text-align:center" %)0 to 255|(% style="text-align:center" %)W|(% style="text-align:center" %)~-~-|(% style="text-align:center" %)0|(% style="text-align:center" %)PT module temperature unit
371 +|(% style="text-align:center; width:142px" %)02|(% style="width:288px" %)(((
372 +PT module power frequency suppression
373 +
374 +0: Suppress 50 Hz
375 +
376 +Others: Suppress 60Hz
377 +)))|(% style="text-align:center" %)UINT8|(% style="text-align:center" %)0 to 255|(% style="text-align:center" %)W|(% style="text-align:center" %)~-~-|(% style="text-align:center" %)0|(% style="text-align:center" %)PT module power frequency suppression
378 +|(% style="text-align:center; width:142px" %)03|(% style="width:288px" %)Reserve parameter 0|(% style="text-align:center" %)UINT8|(% style="text-align:center" %)0 to 255|(% style="text-align:center" %)W|(% style="text-align:center" %)~-~-|(% style="text-align:center" %)0|(% style="text-align:center" %)Reserve 0
379 +|(% style="text-align:center; width:142px" %)04|(% style="width:288px" %)Reserve Parameter 1|(% style="text-align:center" %)UINT8|(% style="text-align:center" %)0 to 255|(% style="text-align:center" %)W|(% style="text-align:center" %)~-~-|(% style="text-align:center" %)0|(% style="text-align:center" %)Reserve 1
380 +|(% style="text-align:center; width:142px" %)05|(% style="width:288px" %)Reserve parameter 2|(% style="text-align:center" %)UINT8|(% style="text-align:center" %)0 to 255|(% style="text-align:center" %)W|(% style="text-align:center" %)~-~-|(% style="text-align:center" %)0|(% style="text-align:center" %)Reserve 2
381 +|(% rowspan="4" style="text-align:center; width:77px" %)8001|(% style="text-align:center; width:142px" %)01|(% rowspan="4" style="width:288px" %)(((
382 +Sensor type
383 +
384 +0: Disable
385 +
386 +1: PT100
387 +
388 +3: PT1000
389 +
390 +4: CU50
391 +
392 +Others: Not supported
393 +)))|(% rowspan="4" style="text-align:center" %)UINT8|(% rowspan="4" style="text-align:center" %)0 to 4|(% rowspan="4" style="text-align:center" %)W|(% rowspan="4" style="text-align:center" %)~-~-|(% rowspan="4" style="text-align:center" %)1|(% style="text-align:center" %)CH0 sensor type
394 +|(% style="text-align:center; width:142px" %)02|(% style="text-align:center" %)CH1 sensor type
395 +|(% style="text-align:center; width:142px" %)03|(% style="text-align:center" %)CH2 sensor type
396 +|(% style="text-align:center; width:142px" %)04|(% style="text-align:center" %)CH3 sensor type
397 +|(% rowspan="4" style="text-align:center; width:77px" %)8002|(% style="text-align:center; width:142px" %)01|(% rowspan="4" style="width:288px" %)(((
398 +PT module channel filtering time: 0 to 100s
399 +
400 +Others: 100s
401 +)))|(% rowspan="4" style="text-align:center" %)UINT8|(% rowspan="4" style="text-align:center" %)0 to 255|(% rowspan="4" style="text-align:center" %)W|(% rowspan="4" style="text-align:center" %)s|(% rowspan="4" style="text-align:center" %)5|(% style="text-align:center" %)CH0 filter time
402 +|(% style="text-align:center; width:142px" %)02|(% style="text-align:center" %)CH1 filter time
403 +|(% style="text-align:center; width:142px" %)03|(% style="text-align:center" %)CH2 filter time
404 +|(% style="text-align:center; width:142px" %)04|(% style="text-align:center" %)CH3 filter time
405 +|(% rowspan="4" style="text-align:center; width:77px" %)8003|(% style="text-align:center; width:142px" %)01|(% rowspan="4" style="width:288px" %)(((
406 +Overlimit detection enable
407 +
408 +0: Disable
409 +
410 +Others: Enable
411 +)))|(% rowspan="4" style="text-align:center" %)UINT8|(% rowspan="4" style="text-align:center" %)0 to 255|(% rowspan="4" style="text-align:center" %)W|(% rowspan="4" style="text-align:center" %)~-~-|(% rowspan="4" style="text-align:center" %)0|(% style="text-align:center" %)CH0 overlimit detection
412 +|(% style="text-align:center; width:142px" %)02|(% style="text-align:center" %)CH1 overlimit detection
413 +|(% style="text-align:center; width:142px" %)03|(% style="text-align:center" %)CH2 overlimit detection
414 +|(% style="text-align:center; width:142px" %)04|(% style="text-align:center" %)CH3 overlimit detection
415 +|(% rowspan="4" style="text-align:center; width:77px" %)8004|(% style="text-align:center; width:142px" %)01|(% rowspan="8" style="width:288px" %)(((
416 +Temperature unit: 0.1℃/0.1℉
417 +
418 +The upper and lower limits of sensors are different for each model
419 +)))|(% rowspan="4" style="text-align:center" %)INT32|(% rowspan="4" style="text-align:center" %)-32768 to 40000|(% rowspan="4" style="text-align:center" %)W|(% rowspan="4" style="text-align:center" %)~-~-|(% rowspan="4" style="text-align:center" %)32767|(% style="text-align:center" %)CH0 temperature upper limit
420 +|(% style="text-align:center; width:142px" %)02|(% style="text-align:center" %)CH1 temperature upper limit
421 +|(% style="text-align:center; width:142px" %)03|(% style="text-align:center" %)CH2 temperature upper limit
422 +|(% style="text-align:center; width:142px" %)04|(% style="text-align:center" %)CH3 temperature upper limit
423 +|(% rowspan="4" style="text-align:center; width:77px" %)8005|(% style="text-align:center; width:142px" %)01|(% rowspan="4" style="text-align:center" %)INT32|(% rowspan="4" style="text-align:center" %)-32768 to 40000|(% rowspan="4" style="text-align:center" %)W|(% rowspan="4" style="text-align:center" %)~-~-|(% rowspan="4" style="text-align:center" %)-32768|(% style="text-align:center" %)CH0 temperature lower limit
424 +|(% style="text-align:center; width:142px" %)02|(% style="text-align:center" %)CH1 temperature lower limit
425 +|(% style="text-align:center; width:142px" %)03|(% style="text-align:center" %)CH1 temperature lower limit
426 +|(% style="text-align:center; width:142px" %)04|(% style="text-align:center" %)CH3 temperature lower limit
427 +|(% rowspan="4" style="text-align:center; width:77px" %)8006|(% style="text-align:center; width:142px" %)01|(% rowspan="4" style="width:288px" %)(((
428 +Offset temperature value (0.1℃/0.1 ℉)
429 +
430 +0: No offset
431 +
432 +
433 +)))|(% rowspan="4" style="text-align:center" %)INT16|(% rowspan="4" style="text-align:center" %)-3000 to 3000|(% rowspan="4" style="text-align:center" %)W|(% rowspan="4" style="text-align:center" %)~-~-|(% rowspan="4" style="text-align:center" %)0|(% style="text-align:center" %)CH0 temperature offset
434 +|(% style="text-align:center; width:142px" %)02|(% style="text-align:center" %)CH1 temperature offset
435 +|(% style="text-align:center; width:142px" %)03|(% style="text-align:center" %)CH2 temperature offset
436 +|(% style="text-align:center; width:142px" %)04|(% style="text-align:center" %)CH3 temperature offset
437 +|(% rowspan="3" style="text-align:center; width:77px" %)A000|(% style="text-align:center; width:142px" %)00|(% style="width:288px" %)Module status information|(% style="text-align:center" %)UINT16|(% style="text-align:center" %)~-~-|(% style="text-align:center" %)R|(% style="text-align:center" %)~-~-|(% style="text-align:center" %)~-~-|(% style="text-align:center" %)Module status
438 +|(% style="text-align:center; width:142px" %)01|(% style="width:288px" %)Version code|(% style="text-align:center" %)UINT16|(% style="text-align:center" %)~-~-|(% style="text-align:center" %)R|(% style="text-align:center" %)~-~-|(% style="text-align:center" %)~-~-|(% style="text-align:center" %)Version
439 +|(% style="text-align:center; width:142px" %)02|(% style="width:288px" %)Error status|(% style="text-align:center" %)UINT16|(% style="text-align:center" %)~-~-|(% style="text-align:center" %)R|(% style="text-align:center" %)~-~-|(% style="text-align:center" %)~-~-|(% style="text-align:center" %)Run status
440 +|(% rowspan="4" style="text-align:center; width:77px" %)6000|(% style="text-align:center; width:142px" %)01|(% rowspan="4" style="width:288px" %)(((
441 +PT CH0 to CH3 channel current temperature value (℃/℉)
442 +
443 +
444 +)))|(% style="text-align:center" %)Float|(% style="text-align:center" %)~-~-|(% style="text-align:center" %)R|(% style="text-align:center" %)~-~-|(% style="text-align:center" %)~-~-|(% style="text-align:center" %)PT CH0 temperature
445 +|(% style="text-align:center; width:142px" %)02|(% style="text-align:center" %)Float|(% style="text-align:center" %)~-~-|(% style="text-align:center" %)R|(% style="text-align:center" %)~-~-|(% style="text-align:center" %)~-~-|(% style="text-align:center" %)PT CH1 temperature
446 +|(% style="text-align:center; width:142px" %)03|(% style="text-align:center" %)Float|(% style="text-align:center" %)~-~-|(% style="text-align:center" %)R|(% style="text-align:center" %)~-~-|(% style="text-align:center" %)~-~-|(% style="text-align:center" %)PT CH2 temperature
447 +|(% style="text-align:center; width:142px" %)04|(% style="text-align:center" %)Float|(% style="text-align:center" %)~-~-|(% style="text-align:center" %)R|(% style="text-align:center" %)~-~-|(% style="text-align:center" %)~-~-|(% style="text-align:center" %)PT CH3 temperature
448 +|(% rowspan="4" style="text-align:center; width:77px" %)6001|(% style="text-align:center; width:142px" %)01|(% rowspan="4" style="width:288px" %)(((
449 +PT CH0 to CH3 status code
450 +
451 +0, no error
452 +
453 +0xFF, sensor not supported
454 +
455 +0x10, configuration error: Temperature overlimit configuration
456 +
457 +0x11, configuration error: The upper limit of the overlimit configuration is less than the lower limit
458 +
459 +0x12, configuration error: Temperature offset configuration temperature overlimit
460 +
461 +0x13, configuration error: NTC B value overlimit
462 +
463 +0x40, channel disconnection error
464 +
465 +0x41, channel temperature overflow
466 +
467 +0x42, channel temperature overlimit
468 +)))|(% style="text-align:center" %)UINT16|(% style="text-align:center" %)~-~-|(% style="text-align:center" %)R|(% style="text-align:center" %)~-~-|(% style="text-align:center" %)~-~-|(% style="text-align:center" %)PT CH0 status
469 +|(% style="text-align:center; width:142px" %)02|(% style="text-align:center" %)UINT16|(% style="text-align:center" %)~-~-|(% style="text-align:center" %)R|(% style="text-align:center" %)~-~-|(% style="text-align:center" %)~-~-|(% style="text-align:center" %)PT CH1 status
470 +|(% style="text-align:center; width:142px" %)03|(% style="text-align:center" %)UINT16|(% style="text-align:center" %)~-~-|(% style="text-align:center" %)R|(% style="text-align:center" %)~-~-|(% style="text-align:center" %)~-~-|(% style="text-align:center" %)PT CH2 status
471 +|(% style="text-align:center; width:142px" %)04|(% style="text-align:center" %)UINT16|(% style="text-align:center" %)~-~-|(% style="text-align:center" %)R|(% style="text-align:center" %)~-~-|(% style="text-align:center" %)~-~-|(% style="text-align:center" %)PT CH3 status
472 +
473 += **6 Error code** =
474 +
475 +|(% style="text-align:center" %)**Error code**|(% style="text-align:center; width:354px" %)**Description**|(% style="text-align:center; width:153px" %)**Action**|(% style="text-align:center; width:366px" %)**Solution**|(% style="text-align:center; width:161px" %)**Detect time**
476 +|(% style="text-align:center" %)7080|(% style="width:354px" %)Expansion module and checksum error|(% style="text-align:center; width:153px" %)Continue to run|(% style="width:366px" %)Detect whether there is external interference between the expansion module and the PLC.|(% style="text-align:center; width:161px" %)Instruction running
477 +|(% style="text-align:center" %)7081|(% style="width:354px" %)Expansion module communication message error|(% style="text-align:center; width:153px" %)Continue to run|(% style="width:366px" %)Detect whether there is external interference between the expansion module and the PLC.|(% style="text-align:center; width:161px" %)Instruction running
478 +|(% style="text-align:center" %)7083|(% style="width:354px" %)Expansion module access error|(% style="text-align:center; width:153px" %)Continue to run|(% style="width:366px" %)Detect the link between the expansion module and the host|(% style="text-align:center; width:161px" %)Instruction running
479 +|(% style="text-align:center" %)7084|(% style="width:354px" %)The number of expansion modules configured does not match the actual number|(% style="text-align:center; width:153px" %)Continue to run|(% style="width:366px" %)Check whether the configuration is correct.|(% style="text-align:center; width:161px" %)Instruction running
480 +|(% style="text-align:center" %)7110|(% style="width:354px" %)Extension module configuration error|(% style="text-align:center; width:153px" %)Stop running|(% style="width:366px" %)Check that the extension module is configured correctly|(% style="text-align:center; width:161px" %)Instruction running
481 +
482 += **7 Version record** =
483 +
484 +|(% colspan="3" style="text-align:center" %)Current version: REV1.0
485 +|(% style="text-align:center" %)**Version code**|(% style="text-align:center" %)**Modify content**|(% style="text-align:center" %)**Date**
486 +|(% style="text-align:center" %)REV1.1|(% style="text-align:center" %)New wiring diagram|(% style="text-align:center" %)December 29, 2025
487 +|(% style="text-align:center" %)REV1.0|(% style="text-align:center" %)The first release|(% style="text-align:center" %)October 22, 2025
488 +
489 +
123.wmf
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Iris
Size
... ... @@ -1,0 +1,1 @@
1 +81.9 KB
Content
1761790435458-276.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Iris
Size
... ... @@ -1,0 +1,1 @@
1 +2.5 MB
Content
1761790435527-310.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Iris
Size
... ... @@ -1,0 +1,1 @@
1 +2.5 MB
Content
1761790435581-926.jpeg
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Iris
Size
... ... @@ -1,0 +1,1 @@
1 +500.0 KB
Content
1761790435591-998.jpeg
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Iris
Size
... ... @@ -1,0 +1,1 @@
1 +26.3 KB
Content
1761790435593-675.jpeg
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Iris
Size
... ... @@ -1,0 +1,1 @@
1 +68.8 KB
Content
1761790435595-524.jpeg
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Iris
Size
... ... @@ -1,0 +1,1 @@
1 +56.7 KB
Content
1761790435597-964.jpeg
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Iris
Size
... ... @@ -1,0 +1,1 @@
1 +147.2 KB
Content
1761790435601-438.jpeg
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Iris
Size
... ... @@ -1,0 +1,1 @@
1 +545.2 KB
Content
1761790435610-644.jpeg
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Iris
Size
... ... @@ -1,0 +1,1 @@
1 +93.1 KB
Content
1761790435616-427.jpeg
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Iris
Size
... ... @@ -1,0 +1,1 @@
1 +706.6 KB
Content
1761790435644-648.jpeg
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Iris
Size
... ... @@ -1,0 +1,1 @@
1 +630.2 KB
Content
1761790435655-470.jpeg
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Iris
Size
... ... @@ -1,0 +1,1 @@
1 +678.3 KB
Content
1761790435666-763.jpeg
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Iris
Size
... ... @@ -1,0 +1,1 @@
1 +153.3 KB
Content
1761790581619-130.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Iris
Size
... ... @@ -1,0 +1,1 @@
1 +565.4 KB
Content
1761790728530-525.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Iris
Size
... ... @@ -1,0 +1,1 @@
1 +47.3 KB
Content
1761790839326-892.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Iris
Size
... ... @@ -1,0 +1,1 @@
1 +126.8 KB
Content
1761790846633-145.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Iris
Size
... ... @@ -1,0 +1,1 @@
1 +169.4 KB
Content
1761790902574-569.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Iris
Size
... ... @@ -1,0 +1,1 @@
1 +581.1 KB
Content
1761791554402-822.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Iris
Size
... ... @@ -1,0 +1,1 @@
1 +491.0 KB
Content
1761791932607-101.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Iris
Size
... ... @@ -1,0 +1,1 @@
1 +601.9 KB
Content
1761792561604-505.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Iris
Size
... ... @@ -1,0 +1,1 @@
1 +977.1 KB
Content
1761792587489-425.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Iris
Size
... ... @@ -1,0 +1,1 @@
1 +977.1 KB
Content
1761792704532-635.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Iris
Size
... ... @@ -1,0 +1,1 @@
1 +299.8 KB
Content
1761792792216-675.jpeg
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Iris
Size
... ... @@ -1,0 +1,1 @@
1 +500.0 KB
Content
1768207221500-618.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Iris
Size
... ... @@ -1,0 +1,1 @@
1 +59.1 KB
Content
图片1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Iris
Size
... ... @@ -1,0 +1,1 @@
1 +4.8 MB
Content
图片2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Iris
Size
... ... @@ -1,0 +1,1 @@
1 +4.1 MB
Content
图片3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Iris
Size
... ... @@ -1,0 +1,1 @@
1 +3.0 MB
Content
图片4.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Iris
Size
... ... @@ -1,0 +1,1 @@
1 +4.8 MB
Content
图片5.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Iris
Size
... ... @@ -1,0 +1,1 @@
1 +4.8 MB
Content
图片6.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Iris
Size
... ... @@ -1,0 +1,1 @@
1 +4.8 MB
Content
图片7.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Iris
Size
... ... @@ -1,0 +1,1 @@
1 +581.1 KB
Content
图片8.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Iris
Size
... ... @@ -1,0 +1,1 @@
1 +491.0 KB
Content