Skip to Content

Changes for page LX5V-2PT2DAI

Last modified by WeconTurkey on 2024/10/16 22:58
From version 12.1
edited by Karen
on 2023/05/29 16:18
Change comment: There is no comment for this version
To version 13.1
edited by Karen
on 2023/05/29 16:19
Change comment: There is no comment for this version

Summary

Details

Page properties
Content
... ... @@ -165,11 +165,11 @@
165 165  
166 166  = **5. Description of PLC device** =
167 167  
168 -~1. When connected to LX3 series PLC, please refer to LX3 series BD board manual.
168 +~1. When connected to LX3 series PLC, please refer to LX3 series BD module manual.
169 169  
170 -2. When connected to LX5 series PLC, if the firmware version of PLC is lower than 2.051 (excluding 2.051), or BD board is not configured by host computer, it can be controlled by the following system devices:
170 +2. When connected to LX5 series PLC, if the firmware version of PLC is lower than 2.051 (excluding 2.051), or BD module is not configured by host computer, it can be controlled by the following system devices:
171 171  
172 -3. User can select device through I/O mapping to use the configuration function of new BD board. For details, please refer to "[[6.1 Parameter configuration>>path:#_6.1 参数配置]]".
172 +3. User can select device through I/O mapping to use the configuration function of new BD module. For details, please refer to "[[6.1 Parameter configuration>>path:#_6.1 参数配置]]".
173 173  
174 174  **Device allocation**
175 175