Changes for page Appendixes

Last modified by Jiahao Lai on 2026/04/13 17:21

From 1.1 to 1.2

From version 1.2

edited by Iris
on 2025/10/23 15:53

Change comment: There is no comment for this version

To version 5.1

edited by Jiahao Lai
on 2026/04/13 17:21

Change comment: There is no comment for this version

Raw
Rendered

Summary

Page properties (2 modified, 0 added, 0 removed)
Attachments (0 modified, 1 added, 0 removed)
- 1761206358928-705.png

Details

Page properties

Author

@@ -1,1 +1,1 @@
--XWiki.Iris
++XWiki.Jim258

Content

@@ -1,4 +1,4 @@
--== [[image:file:///C:\Users\Administrator\AppData\Local\Temp\ksohtml9284\wps112.png]]**Appendix 1 Special Relay (SM)** ==
++== **Appendix 1 Special Relay (SM)** ==
  === **Error Message** ===
@@ -472,7 +472,7 @@
  (% style="margin-left:auto; margin-right:auto" %)
  |**SM sign**|**Name**|**Content**|**R/W**|**Power-down save**
  |(% colspan="5" %)**Communication COM1**
--|SM2540SM2540|COM1 send control on| |R/W|×
++|SM2540|COM1 send control on| |R/W|×
  |SM2541|COM1 send control/send prompt| |R/W|×
  |SM2542|COM1 receive control on| |R/W|×
  |SM2543|COM1 accept control/receive prompt| |R/W|×
@@ -567,7 +567,7 @@
  (When being set as ON, STOP->RUN; it can be automatically changed to OFF after modification)
  )))|R/W|√
--== [[image:file:///C:\Users\Administrator\AppData\Local\Temp\ksohtml9284\wps135.png]]**Appendix 2 Special Register (SD)** ==
++== **Appendix 2 Special Register (SD)** ==
  === **Error Message** ===
@@ -609,7 +609,7 @@
  |SD49|Production information string|Store production information and ASCII code| |X
  |SD50~~SD99|Model identification code|Store PLC model identification code, which cannot be modified|R|X
--=== **Clock Information**[[image:file:///C:\Users\Administrator\AppData\Local\Temp\ksohtml9284\wps138.png]] ===
++=== **Clock Information** ===
  |**SD label**|**Name**|**Content**|**R/W**|**Power-down save**
  |SD100|Real time clock seconds (0~~59)|(% rowspan="7" %)PLC Built-in RTC Clock|R|X
@@ -745,7 +745,7 @@
  |SD343|Timing clock output 4 counts the value in scanned numbers|The timing clock output 4 of DUTY instruction counts the value in scanned numbers|R/W|X
  |SD344|Timing clock output 5 counts the value in scanned numbers|The timing clock output 5 of DUTY instruction counts the value in scanned numbers|R/W|X
--=== **Interrupt Prohibited**[[image:file:///C:\Users\Administrator\AppData\Local\Temp\ksohtml9284\wps141.png]] ===
++=== **Interrupt Prohibited** ===
  |**SD label**|**Name**|**Content**|**R/W**|**Power-down save**
  |SD350~~SD381|Timer interrupt prohibited mask|SIMASK instruction interrupt mask, each bit represents an interrupt, see SIMAK instruction for details|R/W|X
@@ -960,7 +960,7 @@
  |SD632|HSC7 input filter setting (0.01us)|Range 0~~1700, default 0|R|X
  |SD633|The DHSCS, DHSCR and DHSZ instructions use the priority settings of the HSC7 channel|0~~2. The highest priority is 0, and the default value is 0|R/W|X
--=== **Right Expansion Module**[[image:file:///C:\Users\Administrator\AppData\Local\Temp\ksohtml9284\wps143.png]] ===
++=== **Right Expansion Module** ===
  |**SD label**|**Name**|**Content**|**R/W**|**Power-down save**
  |SD2081| |Reserved|R|×
@@ -976,7 +976,7 @@
 /4: LX6_16EYT module
  )))|R|×
--=== **Input Filter**[[image:file:///C:\Users\Administrator\AppData\Local\Temp\ksohtml9284\wps144.png]] ===
++=== **Input Filter** ===
  |**SD label**|**Name**|**Content**|**R/W**|**Power-down save**
  |SD2280|Input filter point setting, with the default value being 10ms|Low byte X0~~X3, high byte X4~~X7|R/W|×
@@ -1110,7 +1110,7 @@
  |SD4014|Low bit of this boot RUN time|(% rowspan="2" %)Store the RUN time after PLC starts up, with the unit being s|R|×
  |SD4015|High bit of this boot RUN time|R|×
--== [[image:file:///C:\Users\Administrator\AppData\Local\Temp\ksohtml9284\wps148.png]]**Appendix 3 Error Codes Sorting** ==
++== **Appendix 3 Error Codes Sorting** ==
  === **PLC Hardware Error** ===
@@ -1136,7 +1136,7 @@
  |1500|The sign error when executing OUT T in END instruction during the ladder diagram conversion|Stop running|Detect OUT T instruction in ladder diagram|When END instruction is executed
  |1501|Null pointer error|Stop running|Check whether an undefined program name is used.|At the time of initialization
--=== **PLC Parameter Error**[[image:file:///C:\Users\Administrator\AppData\Local\Temp\ksohtml9284\wps151.png]] ===
++=== **PLC Parameter Error** ===
  |**Error code**|**Description**|**Action**|**Processing approach**|**Test time**
  |2000|Number of I/O points allocated by program is different from the actual number of hardware I/O points|Stop running|Check I/O points configuration|When the state changes from STOP to RUN
@@ -1153,18 +1153,18 @@
  |2202|Special parameter setting error|Stop running|Check special parameters settings|When the state changes from STOP to RUN
  |2203|PLC EDITOR and PLC firmware versions are inconsistent|Stop running|Please re-install the PLC Editor2 or upgrade the firmware by checking the correspondence table between the PLC Editor2 and the firmware version.|When the state changes from STOP to RUN
  |2380|The current scan cycle exceeds the constant scan cycle set value|Continue to run|Modify the constant scan cycle setting|When END instruction is executed
--|2400|Event exceeds maximum range         |Stop running|Check whether the event setting exceeds 100|When the state changes from STOP to RUN
--|2401|Event execution program is empty         |Stop running|Whether to establish the correct event program|When the state changes from STOP to RUN
--|2402|Event clear program is empty         |Stop running|Whether to establish the correct event program|When the state changes from STOP to RUN
--|2403|Timed interrupt exceeds the maximum range     |Stop running|Check whether the timer interrupt setting exceeds 100|When the state changes from STOP to RUN
--|2404|Timer interrupt execution program is empty     |Stop running|Whether to establish the correct timer interrupt program|When the state changes from STOP to RUN
--|2405|Timer interrupt priority setting error   |Stop running|Check whether the timer interrupt priority is set to 0~~2|When the state changes from STOP to RUN
++|2400|Event exceeds maximum range         |Stop running|Check whether the event setting exceeds 100|When the state changes from STOP to RUN
++|2401|Event execution program is empty         |Stop running|Whether to establish the correct event program|When the state changes from STOP to RUN
++|2402|Event clear program is empty         |Stop running|Whether to establish the correct event program|When the state changes from STOP to RUN
++|2403|Timed interrupt exceeds the maximum range     |Stop running|Check whether the timer interrupt setting exceeds 100|When the state changes from STOP to RUN
++|2404|Timer interrupt execution program is empty     |Stop running|Whether to establish the correct timer interrupt program|When the state changes from STOP to RUN
++|2405|Timer interrupt priority setting error   |Stop running|Check whether the timer interrupt priority is set to 0~~2|When the state changes from STOP to RUN
  |2406|High-speed counting interrupt exceeds the maximum range|Stop running|Check whether the high-speed counting interrupt setting exceeds 100|When the state changes from STOP to RUN
  |2407|High-speed counting interrupt execution program is empty|Stop running|Whether to establish the correct high-speed counting interrupt program|When the state changes from STOP to RUN
--|2408|High-speed counting priority setting error   |Stop running|Check whether the high-speed counting interrupt priority is set to 0~~2|When the state changes from STOP to RUN
--|2409|External interrupt exceeds the maximum range     |Stop running|Check whether the external interrupt setting exceeds 16|When the state changes from STOP to RUN
--|240A|External interrupt execution program is empty     |Stop running|Whether to establish the correct external interrupt program|When the state changes from STOP to RUN
--|240B|External interrupt priority setting error   |Stop running|Check whether the external interrupt priority is set to 0~~2|When the state changes from STOP to RUN
++|2408|High-speed counting priority setting error   |Stop running|Check whether the high-speed counting interrupt priority is set to 0~~2|When the state changes from STOP to RUN
++|2409|External interrupt exceeds the maximum range     |Stop running|Check whether the external interrupt setting exceeds 16|When the state changes from STOP to RUN
++|240A|External interrupt execution program is empty     |Stop running|Whether to establish the correct external interrupt program|When the state changes from STOP to RUN
++|240B|External interrupt priority setting error   |Stop running|Check whether the external interrupt priority is set to 0~~2|When the state changes from STOP to RUN
  |2500|High-speed counter channel exceeds the maximum range|Stop running|Detect high-speed input configuration|When the state changes from STOP to RUN
  |2501|High-speed counter mode setting error|Stop running|Detect high-speed input configuration|When the state changes from STOP to RUN
  |2502|High-speed counter frequency multiplication setting error|Stop running|Detect high-speed input configuration|When the state changes from STOP to RUN
@@ -1405,7 +1405,7 @@
  |4F97|In the center of circle mode, the calculated radius distance is greater than the maximum radius, which means the range is +/-800,000 pulses.|Continue to run|Modify application instruction parameters|Instruction is running
  |4F98|Helical interpolation error, the Z axis is the main axis (the Z axis coordinate is greater than the number of virtual main axes in the circular plane).|Continue to run|Modify application instruction parameters|Instruction is running
  |4F99|Helical interpolation error, Z axis is 0.|Continue to run|Modify application instruction parameters|Instruction is running
--|4F9B|The lead setting is out of range (i.e. lead appears[[image:file:///C:\Users\Administrator\AppData\Local\Temp\ksohtml9284\wps155.png]]).|Continue to run|Modify application instruction parameters|Instruction is running
++|4F9B|The lead setting is out of range (i.e. lead appears[[image:1761206358928-705.png]]).|Continue to run|Modify application instruction parameters|Instruction is running
  |5080|The ethernet socket is already connected and cannot be opened again.|Continue to run|Check if SOCOPEN instruction is executed repeatedly|When the application instruction is executed
  |5081|Ethernet socket is not open, which results in the failure in operation|Continue to run|Check whether set ON the connected sign bit of the SOCOPEN instruction (d2) parameter.|When the application instruction is executed
  |5082|Socket ID input by Ethernet instruction is out of range.|Continue to run|Modify application instruction parameters|When the application instruction is executed
@@ -1426,7 +1426,7 @@
  )))|When the application instruction is executed
  |5090|Abnormal network cable connection|Continue to run|Check if the network cable is connected|When the application instruction is executed
--**Right Expansion Module Error (Communication Error Reported)**[[image:file:///C:\Users\Administrator\AppData\Local\Temp\ksohtml9284\wps156.png]]
++**Right Expansion Module Error (Communication Error Reported)**
  |**Error code**|**Description**|**Action**|**Processing approach**|**Test time**
  |7080|Expansion module checksum error|Continue to run|Detect the link between the expansion module and the host or whether there is external interference|Instruction is running
@@ -1433,3 +1433,139 @@
  |7081|Abnormal expansion module communication message|Continue to run|Detect the link between the expansion module and the host or whether there is external interference|Instruction is running
  |7082|FROM/TO instruction error|Continue to run|Detect the link between the expansion module and the host|Instruction is running
  |7083|Expansion module access exception|Continue to run|Detect the link between the expansion module and the host|Instruction is running
++
++== **Appendix 4 ASCII Code Comparison Table** ==
++
++=== **ASCII Code Comparison Table** ===
++
++
++|**Bin**|**Oct**|**(Dec)**|**Hex**|(% rowspan="2" %)**Abbreviations/characters**|(% rowspan="2" %)**Explanation**
++|**(Binary)**|**(Octal)**|**(Decimal)**|**(Hexadecimal)**
++|0000 0000|0|0|0x00|NUL(null)|Null character
++|0000 0001|1|1|0x01|SOH (start of headline)|Start of headline
++|0000 0010|2|2|0x02|STX (start of text)|Start of text
++|0000 0011|3|3|0x03|ETX (end of text)|End of text
++|0000 0100|4|4|0x04|EOT (end of transmission)|End of transmission
++|0000 0101|5|5|0x05|ENQ (enquiry)|Enquiry
++|0000 0110|6|6|0x06|ACK (acknowledge)|Acknowledge
++|0000 0111|7|7|0x07|BEL (bell)|Bell
++|0000 1000|10|8|0x08|BS (backspace)|Backspace
++|0000 1001|11|9|0x09|HT (horizontal tab)|Horizontal tab
++|0000 1010|12|10|0x0A|LF (NL line feed, new line)|Line feed
++|0000 1011|13|11|0x0B|VT (vertical tab)|Vertical tab
++|0000 1100|14|12|0x0C|FF (NP form feed, new page)|Form feed
++|0000 1101|15|13|0x0D|CR (carriage return)|Carriage return
++|0000 1110|16|14|0x0E|SO (shift out)|Shift out
++|0000 1111|17|15|0x0F|SI (shift in)|Shift in
++|0001 0000|20|16|0x10|DLE (data link escape)|Data link escape
++|0001 0001|21|17|0x11|DC1 (device control 1)|Device control 1
++|0001 0010|22|18|0x12|DC2 (device control 2)|Device control 2
++|0001 0011|23|19|0x13|DC3 (device control 3)|Device control 3
++|0001 0100|24|20|0x14|DC4 (device control 4)|Device control 4
++|0001 0101|25|21|0x15|NAK (negative acknowledge)|Negative acknowledge
++|0001 0110|26|22|0x16|SYN (synchronous idle)|Synchronous idle
++|0001 0111|27|23|0x17|ETB (end of trans. block)|End of transmission block
++|0001 1000|30|24|0x18|CAN (cancel)|Cancel
++|0001 1001|31|25|0x19|EM (end of medium)|End of medium
++|0001 1010|32|26|0x1A|SUB (substitute)|Substitute
++|0001 1011|33|27|0x1B|ESC (escape)|Escape
++|0001 1100|34|28|0x1C|FS (file separator)|File separator
++|0001 1101|35|29|0x1D|GS (group separator)|Group separator
++|0001 1110|36|30|0x1E|RS (record separator)|Record separator
++|0001 1111|37|31|0x1F|US (unit separator)|Unit separator
++|0010 0000|40|32|0x20|(space)|Space
++|0010 0001|41|33|0x21|!|Exclamation mark
++|0010 0010|42|34|0x22|"|Double quotation marks
++|0010 0011|43|35|0x23|#|Pound sign
++|0010 0100|44|36|0x24|$|Dollar sign
++|0010 0101|45|37|0x25|%|Percent sign
++|0010 0110|46|38|0x26|&|Ampersand
++|0010 0111|47|39|0x27|'|Single quotation mark
++|0010 1000|50|40|0x28|(|Opening bracket
++|0010 1001|51|41|0x29|)|Closing bracket
++|0010 1010|52|42|0x2A|*|Asterisk
++|0010 1011|53|43|0x2B|+|Plus sign
++|0010 1100|54|44|0x2C|,|**Comma**
++|0010 1101|55|45|0x2D|-|Subtraction sign/dash
++|0010 1110|56|46|0x2E|.|Full stop
++|0010 1111|57|47|0x2F|/|Slash
++|0011 0000|60|48|0x30|0|Character 0
++|0011 0001|61|49|0x31|1|Character 1
++|0011 0010|62|50|0x32|2|Character 2
++|0011 0011|63|51|0x33|3|Character 3
++|0011 0100|64|52|0x34|4|Character 4
++|0011 0101|65|53|0x35|5|Character 5
++|0011 0110|66|54|0x36|6|Character 6
++|0011 0111|67|55|0x37|7|Character 7
++|0011 1000|70|56|0x38|8|Character 8
++|0011 1001|71|57|0x39|9|Character 9
++|0011 1010|72|58|0x3A|:|Colon
++|0011 1011|73|59|0x3B|:|Semicolon
++|0011 1100|74|60|0x3C|<|Less-than sign
++|0011 1101|75|61|0x3D|= |Equal sign
++|0011 1110|76|62|0x3E|>|Greater-than sign
++|0011 1111|77|63|0x3F|?|Question mark
++|0100 0000|100|64|0x40|@|Email symbol
++|0100 0001|101|65|0x41|A|Capital letter A
++|0100 0010|102|66|0x42|B|Capital letter B
++|0100 0011|103|67|0x43|C|Capital letter C
++|0100 0100|104|68|0x44|D|Capital letter D
++|0100 0101|105|69|0x45|E|Capital letter E
++|0100 0110|106|70|0x46|F|Capital letter F
++|0100 0111|107|71|0x47|G|Capital letter G
++|0100 1000|110|72|0x48|H|Capital letter H
++|0100 1001|111|73|0x49|I|Capital letter I
++|1001010|112|74|0x4A|J|Capital letter J
++|0100 1011|113|75|0x4B|K|Capital letter K
++|0100 1100|114|76|0x4C|L|Capital letter L
++|0100 1101|115|77|0x4D|M|Capital letter M
++|0100 1110|116|78|0x4E|N|Capital letter N
++|0100 1111|117|79|0x4F|O|Capital letter O
++|0101 0000|120|80|0x50|P|Capital letter P
++|0101 0001|121|81|0x51|Q|Capital letter Q
++|0101 0010|122|82|0x52|R|Capital letter R
++|0101 0011|123|83|0x53|S|Capital letter S
++|0101 0100|124|84|0x54|T|Capital letter T
++|0101 0101|125|85|0x55|U|Capital letter U
++|0101 0110|126|86|0x56|V|Capital letter V
++|0101 0111|127|87|0x57|W|Capital letter W
++|0101 1000|130|88|0x58|X|Capital letter X
++|0101 1001|131|89|0x59|Y|Capital letter Y
++|0101 1010|132|90|0x5A|Z|Capital letter Z
++|0101 1011|133|91|0x5B|[|Open bracket
++|0101 1100|134|92|0x5C|/|Backslash
++|0101 1101|135|93|0x5D|]|Close bracket
++|0101 1110|136|94|0x5E|^|Caret
++|0101 1111|137|95|0x5F|_|Underline
++|0110 0000|140|96|0x60|`|Open single quotation mark
++|0110 0001|141|97|0x61|a|Lowercase letter a
++|0110 0010|142|98|0x62|b|Lowercase letter b
++|0110 0011|143|99|0x63|c|Lowercase letter c
++|0110 0100|144|100|0x64|d|Lowercase letter d
++|0110 0101|145|101|0x65|e|Lowercase letter e
++|0110 0110|146|102|0x66|f|Lowercase letter f
++|0110 0111|147|103|0x67|g|Lowercase letter g
++|0110 1000|150|104|0x68|h|Lowercase letter h
++|0110 1001|151|105|0x69|i|Lowercase letter i
++|0110 1010|152|106|0x6A|j|Lowercase letter j
++|0110 1011|153|107|0x6B|k|Lowercase letter k
++|0110 1100|154|108|0x6C|l|Lowercase letter l
++|0110 1101|155|109|0x6D|m|Lowercase letter m
++|0110 1110|156|110|0x6E|n|Lowercase letter n
++|0110 1111|157|111|0x6F|o|Lowercase letter o
++|0111 0000|160|112|0x70|p|Lowercase letter p
++|0111 0001|161|113|0x71|q|Lowercase letter q
++|0111 0010|162|114|0x72|r|Lowercase letter r
++|0111 0011|163|115|0x73|s|Lowercase letter s
++|0111 0100|164|116|0x74|t|Lowercase letter t
++|0111 0101|165|117|0x75|u|Lowercase letter u
++|0111 0110|166|118|0x76|v|Lowercase letter v
++|0111 0111|167|119|0x77|w|Lowercase letter w
++|0111 1000|170|120|0x78|x|Lowercase letter x
++|0111 1001|171|121|0x79|y|Lowercase letter y
++|0111 1010|172|122|0x7A|z|Lowercase letter z
++|0111 1011|173|123|0x7B|{|Flower bracket
++|0111 1100|174|124|0x7C|~||Vertical line
++|0111 1101|175|125|0x7D|}|Closing flower bracket
++|0111 1110|176|126|0x7E|~~|Tilde
++|0111 1111|177|127|0x7F|DEL (delete)|Delete

1761206358928-705.png

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.Iris

Size

...	...	@@ -1,0 +1,1 @@
	1	+409 bytes

Content

Changes for page Appendixes

Summary

Details

Navigation

Table of Contents