Changes for page 13 HMI Internal Registers

Summary

• Page properties (3 modified, 0 added, 0 removed)
• Attachments (0 modified, 1 added, 0 removed)
  • 6.png

Details

Page properties

Title

...	...	@@ -1,1 +1,1 @@
1		-12 HMI internal registers
	1	+13.HMI Internal Registers

Author

...	...	@@ -1,1 +1,1 @@
1		-XWiki.AiXia
	1	+XWiki.Mora

Content

...	...	@@ -25,6 +25,11 @@
25	25	* The address of the bit address HDX is with a decimal point while word addresses are integers.
26	26	)))
27	27
	28	+= Address ranges table =
	29	+
	30	+(% style="text-align:center" %)
	31	+[[image:6.png]]
	32	+
28	28	= **Data storage area (HDW/HDX)** =
29	29
30	30	It is used to save the temporary data of project.
...	...	@@ -51,21 +51,27 @@
51	51
52	52	It is system recipe data power-off save register. The range is from RPW000000 to RPW990450.
53	53
	59	+(% class="box infomessage" %)
	60	+(((
54	54	**✎Note:**
55	55
56	56	* RPW is power-down retention. The register of this type is able to save the data before the power-down.
57	57	* To avoid possible device failure, do not immediately power off and reboot when configuring the power-down save addre
	65	+)))
58	58
59	59	= **Single user data area (HUW/HUX)** =
60	60
61	61	It is used for system special registers (reserved by system).
62	62
63		-1. Access as word, and serial number range is from HUW0 to HUW199999.
64		-1. Access as bit, and serial number range is from HUX0.0 to HUX199999.15.
	71	+1. Access as word, and serial number range is from HUW0 to HUW1599.
	72	+1. Access as bit, and serial number range is from HUX0.0 to HUX1599.15.
65	65
	74	+(% class="box infomessage" %)
	75	+(((
66	66	**✎Note:**
67	67
68	68	* HUW/HUX is a system special register, so please check the system special register list during use. Please use the address specified in the table and do not use the address which is not mentioned in the table.
	79	+)))
69	69
70	70	(% class="table-bordered" %)
71	71	|=**Special register address**|=**Description**|=**Function**
...	...	@@ -135,8 +135,8 @@
135	135	(% class="table-bordered" style="width:1024px" %)
136	136	|=(% scope="row" style="width: 160px;" %)**Address**|=(% style="width: 282px;" %)**Function**|=(% style="width: 452px;" %)**Description**
137	137	|=(% style="width: 160px;" %)HSW0|(% style="width:282px" %)Language switch|(% style="width:452px" %)Multiple language could be set in the project, HMI support maximum 8 languages. (Power-down save supported)
138		-|=(% style="width: 160px;" %)HSW1|(% style="width:282px" %)Beep frequency|(% style="width:452px" %)Frequency range: 0~~4000
139		-|=(% style="width: 160px;" %)HSW2|(% style="width:282px" %)Beep volume|(% style="width:452px" %)Volume range: 0~~80
	149	+|=(% style="width: 160px;" %)HSW1|(% style="width:282px" %)Beep frequency (Only valid in HMI V1.0 System)|(% style="width:452px" %)Frequency range: 0~~4000
	150	+|=(% style="width: 160px;" %)HSW2|(% style="width:282px" %)Beep volume (Only valid in HMI V1.0 System)|(% style="width:452px" %)Volume range: 0~~80
140	140	|=(% style="width: 160px;" %)HSW3|(% style="width:282px" %)Beep time|(% style="width:452px" %)Unit: ms
141	141	|=(% style="width: 160px;" %)HSW4|(% style="width:282px" %)Beep whether enable or not|(% style="width:452px" %)(((
142	142	* =0: Enable.
...	...	@@ -150,7 +150,7 @@
150	150	)))
151	151	|=(% style="width: 160px;" %)HSW6~~HSW7|(% style="width:282px" %)Number of alarms|(% style="width:452px" %)The number of alarm (it also includes the records of alarm confirmed)
152	152	|=(% style="width: 160px;" %)HSW8|(% style="width:282px" %)Number of unconfirmed history alarm|(% style="width:452px" %)The number of unconfirmed history alarm
153		-|=(% style="width: 160px;" %)HSW9|(% style="width:282px" %)Time out tip|(% style="width:452px" %)(((
	164	+|=(% style="width: 160px;" %)HSW9|(% style="width:282px" %)Time out prompt|(% style="width:452px" %)(((
154	154	* =0: Enable
155	155	* =1: Disable
156	156	)))
...	...	@@ -175,6 +175,7 @@
175	175	* =5: Friday.
176	176	* =6: Saturday.
177	177	)))
	189	+|=(% style="width: 160px;" %)HSW39|(% style="width:282px" %)Beep type(Only valid in HMI V2.0 System)|(% style="width:452px" %)Type range: 1-5, Default is 1.
178	178	|=(% style="width: 160px;" %)HSW134|(% style="width:282px" %)(((
179	179	Whether the Script is read through
180	180
...	...	@@ -241,8 +241,8 @@
241	241	* =2: HSX521.1=1, delete all trend graph.
242	242	* =4: HSX521.2=1, delete all alarms.
243	243	* =16: HSX521.4=1, delete history XY plot.
244		-* =32: HSX521.5=1, delete data records in SD card or flash dish;(Please make a setting which is saved to flash disk or SD card in project setting).
245		-* =64: HSX521.6=1, delete alarms records in SD card or flash dish; (Please make a setting which is saved to flash disk or SD card in project setting).
	256	+* =32: HSX521.5=1, delete data records in SD card or USB flash disk;(Please make a setting which is saved to USB flash disk or SD card in project setting).
	257	+* =64: HSX521.6=1, delete alarms records in SD card or USB flash disk; (Please make a setting which is saved to USB flash disk or SD card in project setting).
246	246	)))
247	247	|=(% style="width: 160px;" %)HSW522|(% style="width:282px" %)Copy and paste the alarm/data files in flash to the USB flash disk|(% style="width:452px" %)(((
248	248	* =0: No operation
...	...	@@ -450,7 +450,7 @@
450	450	Address mapping polling cycle, effective range: 40~~1000ms, default: 300ms.
451	451
452	452	* When the set value is greater than 1000, the value is 1000.
453		-* When the set value is greater than 1000, it changes to the default value 300
	465	+* When the set value is lower than 40, it changes to the default value 300
454	454	)))
455	455	|=(% style="width: 160px;" %)HSW1087|(% style="width:282px" %)Control write interval in address mapping|(% style="width:452px" %)(((
456	456	After reading data to the device for N times, Perform an address mapping write operation. N is the interval value. The effective range: 0~~5, and default is 2.
...	...	@@ -485,6 +485,8 @@
485	485	* =0, Default value
486	486	* =1, Release the alarm generated before the last power-down when starting up
487	487	)))
	500	+|=(% style="width: 160px;" %)HSW1200|(% colspan="1" rowspan="2" style="width:282px" %)TSAP settings for HMI in the Siemens LOGO! 8 protocol(ig series or HMI V2.0)|(% style="width:452px" %)HMI local TSAP, which corresponds to the remote TSAP of PLC
	501	+|=(% style="width: 160px;" %)HSW1201|(% style="width:452px" %)HMI remote TSAP, which corresponds to the local TSAP of PLC
488	488	|=(% style="width: 160px;" %)HSW1450|(% style="width:282px" %)Enable objects level password function|(% style="width:452px" %)(((
489	489	* =0, Disable
490	490	* =1, Enable
...	...	@@ -591,6 +591,9 @@
591	591	* =0: Server connection exception
592	592	* =1: Server connection is OK
593	593	)))
	608	+|=(% style="width: 160px;" %)HSW1740|(% style="width:282px" %)Wi-fi signal strength|(% style="width:452px" %)(((
	609	+Display the value of Wi-fi signal signal strength, ranges from 0~~100 (Signal strength is automatically obtained only once when HMI is powered on, and it will not be automatically updated. It needs to be used with the HSW1890)
	610	+)))
594	594	|=(% style="width: 160px;" %)HSW1741|(% colspan="1" rowspan="12" style="width:282px" %)Related IP register in 4Gnetwork status (It is valid when HMI is connected to 4G)|(% style="width:452px" %)Local IP address high byte 1
595	595	|=(% style="width: 160px;" %)HSW1742|(% style="width:452px" %)Local IP address high byte 2
596	596	|=(% style="width: 160px;" %)HSW1743|(% style="width:452px" %)Local IP address high byte 3
...	...	@@ -618,10 +618,180 @@
618	618	* =1: Server connection is OK
619	619	)))
620	620	|=(% style="width: 160px;" %)HSW1761|(% style="width:282px" %)Display 4G network signal strength|(% style="width:452px" %)Signal strength: 0~~31. The greater the value ,the signal is stronger
	638	+|=(% style="width: 160px;" %)(((
	639	+HSW1762
	640	+)))|(% colspan="1" rowspan="13" style="width:282px" %)(((
	641	+Note: Valid when Ethernet2 of HMI is plugged into the network cable.
	642	+①、When the Ethernet setting is enabled in the project parameters, this register displays the set value.
	643	+②. When the Ethernet setting is not enabled in the engineering parameters, the register displays the Ethernet IP automatically acquired by the HMI.
	644	+③. When the HMI is not plugged into the network cable, the register will show 0 whether the engineering parameters are set or not.
	645	+④.IP related registers can be read and written (only static IP mode can be written).
	646	+)))|(% style="width:452px" %)(((
	647	+Ethernet2 Local IP address high byte 1
	648	+)))
	649	+|=(% style="width: 160px;" %)(((
	650	+HSW1763
	651	+)))|(% style="width:452px" %)(((
	652	+Ethernet2 Local IP address high byte 2
	653	+)))
	654	+|=(% style="width: 160px;" %)(((
	655	+HSW1764
	656	+)))|(% style="width:452px" %)(((
	657	+Ethernet2 Local IP address high byte 3
	658	+)))
	659	+|=(% style="width: 160px;" %)(((
	660	+HSW1765
	661	+)))|(% style="width:452px" %)(((
	662	+Ethernet2 Local IP address high byte 4
	663	+)))
	664	+|=(% style="width: 160px;" %)(((
	665	+HSW1766
	666	+)))|(% style="width:452px" %)(((
	667	+Ethernet2 Local mask IP address high byte 1
	668	+)))
	669	+|=(% style="width: 160px;" %)(((
	670	+HSW1767
	671	+)))|(% style="width:452px" %)(((
	672	+Ethernet2 Local mask IP address high byte 2
	673	+)))
	674	+|=(% style="width: 160px;" %)(((
	675	+HSW1768
	676	+)))|(% style="width:452px" %)Ethernet2 Local mask IP address high byte 3
	677	+|=(% style="width: 160px;" %)HSW1769|(% style="width:452px" %)Ethernet2 Local mask IP address high byte 4
	678	+|=(% style="width: 160px;" %)(((
	679	+HSW1770
	680	+)))|(% style="width:452px" %)(((
	681	+Ethernet2 Local gateway IP address high byte 1
	682	+)))
	683	+|=(% style="width: 160px;" %)(((
	684	+HSW1771
	685	+)))|(% style="width:452px" %)(((
	686	+Ethernet2 Local gateway IP address high byte 2
	687	+)))
	688	+|=(% style="width: 160px;" %)(((
	689	+HSW1772
	690	+)))|(% style="width:452px" %)(((
	691	+Ethernet2 Local gateway IP address high byte 3
	692	+)))
	693	+|=(% style="width: 160px;" %)(((
	694	+HSW1773
	695	+)))|(% style="width:452px" %)(((
	696	+Ethernet2 Local gateway IP address high byte 4
	697	+)))
	698	+|=(% style="width: 160px;" %)(((
	699	+HSW1774
	700	+)))|(% style="width:452px" %)(((
	701	+Ethernet2 Local Port Address
	702	+)))
	703	+|=(% style="width: 160px;" %)(((
	704	+HSW1775
	705	+)))|(% colspan="1" rowspan="6" style="width:282px" %)(((
	706	+①Display the MAC code of Ethernet2 NIC
	707	+
	708	+(hexadecimal display)
	709	+
	710	+②Read-only mode, not modifiable
	711	+)))|(% style="width:452px" %)(((
	712	+Ethernet2 Local MAC code high byte 1
	713	+)))
	714	+|=(% style="width: 160px;" %)(((
	715	+HSW1776
	716	+)))|(% style="width:452px" %)(((
	717	+Ethernet2 Local MAC code high byte 2
	718	+)))
	719	+|=(% style="width: 160px;" %)(((
	720	+HSW1777
	721	+)))|(% style="width:452px" %)(((
	722	+Ethernet2 Local MAC code high byte 3
	723	+)))
	724	+|=(% style="width: 160px;" %)(((
	725	+HSW1778
	726	+)))|(% style="width:452px" %)(((
	727	+Ethernet2 Local MAC code high byte 4
	728	+)))
	729	+|=(% style="width: 160px;" %)(((
	730	+HSW1779
	731	+)))|(% style="width:452px" %)(((
	732	+Ethernet2 Local MAC code high byte 5
	733	+)))
	734	+|=(% style="width: 160px;" %)(((
	735	+HSW1780
	736	+)))|(% style="width:452px" %)(((
	737	+Ethernet2 Local MAC code high byte 6
	738	+)))
	739	+|=(% style="width: 160px;" %)(((
	740	+HSW1781
	741	+)))|(% colspan="1" rowspan="8" style="width:282px" %)(((
	742	+①Display and modify DNS1 and DNS2 of Ethernet2
	743	+
	744	+②Related registers can be read and written mode (only static IP mode can be written)
	745	+)))|(% style="width:452px" %)(((
	746	+Ethernet2 Local DNS1 address high byte 1
	747	+)))
	748	+|=(% style="width: 160px;" %)(((
	749	+HSW1782
	750	+)))|(% style="width:452px" %)(((
	751	+Ethernet2 Local DNS1 address high byte 2
	752	+)))
	753	+|=(% style="width: 160px;" %)(((
	754	+HSW1783
	755	+)))|(% style="width:452px" %)(((
	756	+Ethernet2 Local DNS1 address high byte 3
	757	+)))
	758	+|=(% style="width: 160px;" %)(((
	759	+HSW1784
	760	+)))|(% style="width:452px" %)(((
	761	+Ethernet2 Local DNS1 address high byte 4
	762	+)))
	763	+|=(% style="width: 160px;" %)(((
	764	+HSW1785
	765	+)))|(% style="width:452px" %)(((
	766	+Ethernet2 Local DNS2 address high byte 1
	767	+)))
	768	+|=(% style="width: 160px;" %)(((
	769	+HSW1786
	770	+)))|(% style="width:452px" %)(((
	771	+Ethernet2 Local DNS2 address high byte 2
	772	+)))
	773	+|=(% style="width: 160px;" %)(((
	774	+HSW1787
	775	+)))|(% style="width:452px" %)(((
	776	+Ethernet2 Local DNS2 address high byte 3
	777	+)))
	778	+|=(% style="width: 160px;" %)(((
	779	+HSW1788
	780	+)))|(% style="width:452px" %)(((
	781	+Ethernet2 Local DNS2 address high byte 4
	782	+)))
	783	+|=(% style="width: 160px;" %)(((
	784	+HSW1789
	785	+)))|(% colspan="1" style="width:282px" %)(((
	786	+Display or set the dynamic or static IP mode of Ethernet2
	787	+)))|(% style="width:452px" %)(((
	788	+HSX1789.0 = 0, Static IP mode
	789	+
	790	+HSX1789.0 = 1, dynamic IP mode
	791	+)))
	792	+|=(% style="width: 160px;" %)(((
	793	+HSW1790
	794	+)))|(% colspan="1" style="width:282px" %)(((
	795	+Confirm Ethernet2 IP, subnet mask, gateway, DNS1, DNS2, and dynamic static IP settings
	796	+)))|(% style="width:452px" %)(((
	797	+~= 1, confirm the setting (i.e., after modifying IP-related information, set this address to 1, representing confirmation of the modification, after which it will be reset to 0)
	798	+)))
	799	+|=(% style="width: 160px;" %)(((
	800	+HSW1791
	801	+)))|(% colspan="1" style="width:282px" %)(((
	802	+Network status of the Ethernet2 connection server
	803	+)))|(% style="width:452px" %)(((
	804	+~= 0, connection to the server is abnormal = 1, connection to the server is normal
	805	+)))
621	621	|=(% style="width: 160px;" %)HSW1852|(% style="width:282px" %)Control the interval in two consecutive clicks|(% style="width:452px" %)Limit range: 1~~500ms. The default is 100 ms.
622	622	|=(% style="width: 160px;" %)HSW1853|(% style="width:282px" %)File format for exporting data records to USB flash drive or SD card|(% style="width:452px" %)(((
623	623	* =0: db database
624	624	* =1: CSV
	810	+
	811	+(Only valid for script function DbToCsvFile)
625	625	)))
626	626	|=(% style="width: 160px;" %)HSW1854|(% style="width:282px" %)High and low word conversion type|(% style="width:452px" %)(((
627	627	* =0: use the old high-low word conversion (default)
...	...	@@ -644,11 +644,11 @@
644	644	* =2: enter the background
645	645	)))
646	646	|=(% style="width: 160px;" %)HSW1865|(% style="width:282px" %)Priority connection to the cloud|(% style="width:452px" %)(((
647		-* =0: priority  Ethernet
	834	+* =0: priority Ethernet
648	648	* =1: priority WLAN
649	649	* =2: priority 4G
650	650	)))
651		-|=(% style="width: 160px;" %)HSW1866|(% style="width:282px" %)Delete the LUa extension module file|(% style="width:452px" %)(((
	838	+|=(% style="width: 160px;" %)HSW1866|(% style="width:282px" %)Delete the Lua extension module file|(% style="width:452px" %)(((
652	652	* =0: delete;
653	653	* = Others: do not delete
654	654	)))
...	...	@@ -664,14 +664,75 @@
664	664	* = 0: yes (default);
665	665	* = 1: no
666	666	)))
	854	+|=(% style="width: 160px;" %)(((
	855	+HSW1869
	856	+)))|(% style="width:282px" %)(((
	857	+Dynamic screensaver countdown
	858	+)))|(% style="width:452px" %)(((
	859	+Countdown to enter dynamic screensaver effect, unit (S)
	860	+)))
	861	+|=(% style="width: 160px;" %)(((
	862	+HSW1870
	863	+)))|(% style="width:282px" %)(((
	864	+Display or set the dynamic or static IP mode of Ethernet1
	865	+)))|(% style="width:452px" %)(((
	866	+HSX1870.0 = 0, Static IP mode
	867	+
	868	+HSX1870.0 = 1, dynamic IP mode
	869	+)))
	870	+|=(% style="width: 160px;" %)(((
	871	+HSW1871
	872	+)))|(% style="width:282px" %)(((
	873	+Confirm the IP, subnet mask, gateway, DNS1, DNS2, and dynamic static IP settings for Ethernet1
	874	+)))|(% style="width:452px" %)(((
	875	+~= 1, confirm the setting (i.e., after modifying IP-related information, set this address to 1, representing confirmation of the modification, after which it will be reset to 0)
	876	+)))
	877	+|=(% style="width: 160px;" %)(((
	878	+HSW1872
	879	+)))|(% colspan="1" rowspan="8" style="width:282px" %)(((
	880	+①Display and modify DNS1 and DNS2 of Ethernet1
	881	+
	882	+②Related registers can be read and written mode (only static IP mode can be written)
	883	+)))|(% style="width:452px" %)(((
	884	+Ethernet1 Local DNS1 address high byte 1
	885	+)))
	886	+|=(% style="width: 160px;" %)(((
	887	+HSW1873
	888	+)))|(% style="width:452px" %)Ethernet1 Local DNS1 address high byte 2
	889	+|=(% style="width: 160px;" %)(((
	890	+HSW1874
	891	+)))|(% style="width:452px" %)Ethernet1 Local DNS1 address high byte 3
	892	+|=(% style="width: 160px;" %)(((
	893	+HSW1875
	894	+)))|(% style="width:452px" %)Ethernet1 Local DNS1 address high byte 4
	895	+|=(% style="width: 160px;" %)(((
	896	+HSW1876
	897	+)))|(% style="width:452px" %)Ethernet1 Local DNS2 address high byte 1
	898	+|=(% style="width: 160px;" %)(((
	899	+HSW1877
	900	+)))|(% style="width:452px" %)Ethernet1 Local DNS2 address high byte 2
	901	+|=(% style="width: 160px;" %)(((
	902	+HSW1878
	903	+)))|(% style="width:452px" %)Ethernet1 Local DNS2 address high byte 3
	904	+|=(% style="width: 160px;" %)(((
	905	+HSW1879
	906	+)))|(% style="width:452px" %)Ethernet1 Local DNS2 address high byte 4
	907	+|=(% style="width: 160px;" %)HSW1890|(% colspan="1" style="width:282px" %)Enable refresh current network signal|(% style="width:452px" %)(((
	908	+* =1: Refresh the network signal once after triggered (This register will be automatically reset after triggered, only update the signal value once after per 15 seconds, not able to update twice in the short interval)
	909	+* =Others: not refresh
	910	+)))
	911	+|=(% style="width: 160px;" %)HSW1891|(% colspan="1" style="width:282px" %)Enable clear cache for screen data  |(% style="width:452px" %)(((
	912	+* =1, not clear screen cache when switch language
	913	+* =2, trigger clear cache of all screens for once time
	914	+* =3, always clear cache of all screen data
	915	+)))
667	667	|=(% style="width: 160px;" %)HSW10000~~19999|(% style="width:282px" %)Power-down storage area|(% style="width:452px" %)After restart, the data remains
668	668	|=(% style="width: 160px;" %)HSW10035|(% rowspan="13" style="width:282px" %)(((
669		-**✎Note: **Only valid when the HMI is plugged into the Ethernet cable.
670		-
671		-1. If Ethernet settings is enabled in project parameters, this register displays the set value.
672		-1. If Ethernet settings is not enabled in project parameters, IP would automatically obtained IP.
673		-1. If HMI is not connected to the network, the register is displayed as 0 whether the engineering parameters are set.
674		-1. 4. All IP registers of HMI are read-only.
	918	+Note: Valid when Ethernet1 of HMI is plugged into the network cable.
	919	+① When the Ethernet setting is enabled in the project parameters, this register displays the set value.
	920	+② When the Ethernet setting is not enabled in the engineering parameters, the register displays the Ethernet IP automatically acquired by the HMI.
	921	+③ When the HMI is not plugged into the network cable, the register will show 0 whether the engineering parameters are set or not.
	922	+④ IP related registers can be read and written (only static IP mode can be written).
675	675	)))|(% style="width:452px" %)Local IP address high byte 1
676	676	|=(% style="width: 160px;" %)HSW10036|(% style="width:452px" %)Local IP address high byte 2
677	677	|=(% style="width: 160px;" %)HSW10037|(% style="width:452px" %)Local IP address high byte 3
...	...	@@ -686,9 +686,11 @@
686	686	|=(% style="width: 160px;" %)HSW10046|(% style="width:452px" %)Local gateway address high byte 4
687	687	|=(% style="width: 160px;" %)HSW10047|(% style="width:452px" %)Local port address
688	688	|=(% style="width: 160px;" %)HSW10048|(% rowspan="6" style="width:282px" %)(((
689		-Displays the MAC code of the current network card
	937	+①Display the MAC code of Ethernet1 NIC
690	690
691		-(Hexadecimal display)
	939	+(hexadecimal display)
	940	+
	941	+②Read-only mode, not modifiable
692	692	)))|(% style="width:452px" %)Local MAC code high word 1
693	693	|=(% style="width: 160px;" %)HSW10049|(% style="width:452px" %)Local MAC code high word 2
694	694	|=(% style="width: 160px;" %)HSW10050|(% style="width:452px" %)Local MAC code high word 3
...	...	@@ -695,7 +695,7 @@
695	695	|=(% style="width: 160px;" %)HSW10051|(% style="width:452px" %)Local MAC code high word 4
696	696	|=(% style="width: 160px;" %)HSW10052|(% style="width:452px" %)Local MAC code high word 5
697	697	|=(% style="width: 160px;" %)HSW10053|(% style="width:452px" %)Local MAC code high word 6
698		-|=(% style="width: 160px;" %)HSW10118|(% colspan="1" rowspan="2" style="width:282px" %)TSAP settings for HMI in the Siemens logo! 8 protocol|(% style="width:452px" %)HMI local TSAP, which corresponds to the remote TSAP of PLC
	948	+|=(% style="width: 160px;" %)HSW10118|(% colspan="1" rowspan="2" style="width:282px" %)TSAP settings for HMI in the Siemens LOGO! 8 protocol|(% style="width:452px" %)HMI local TSAP, which corresponds to the remote TSAP of PLC
699	699	|=(% style="width: 160px;" %)HSW10119|(% style="width:452px" %)HMI remote TSAP, which corresponds to the local TSAP of PLC
700	700	|=(% style="width: 160px;" %)HSW10461~~10493|(% style="width:282px" %)Remote access password|(% style="width:452px" %)8-character remote access password
701	701	|=(% style="width: 160px;" %)HSW10494~~10558|(% style="width:282px" %)Machine ID (Read only)|(% style="width:452px" %)Machine ID for remote access (read only 64-bit)
...	...	@@ -763,6 +763,7 @@
763	763	* =0: LAN or the external network both OK
764	764	* =1: Only LAN access
765	765	* =2: Only external network can access
	1016	+* =3: Close the functions
766	766	)))
767	767	|=(% style="width: 160px;" %)HSW11757|(% style="width:282px" %)Enable the valid date of the dynamic installment password|(% style="width:452px" %)(((
768	768	* =0: Disabled
...	...	@@ -777,7 +777,34 @@
777	777	)))
778	778	|=(% style="width: 160px;" %)HSW11760|(% style="width:282px" %)Screensaver countdown|(% style="width:452px" %)Display the countdown to enter the Screensaver, unit: second.
779	779	|=(% style="width: 160px;" %)HSW11761|(% style="width:282px" %)Screensaver screen number|(% style="width:452px" %)Set the screen number for Screensaver
	1031	+|=(% style="width: 160px;" %)(((
	1032	+HSW11762
	1033	+)))|(% style="width:282px" %)(((
	1034	+Dynamic screensaver control address
	1035	+)))|(% style="width:452px" %)(((
	1036	+HSX11762.0=0, initialize with project configuration;
780	780
	1038	+HSX11762.0=1, initialize with special register configuration;
	1039	+
	1040	+HSX11762.1=0, disable dynamic screensaver;
	1041	+
	1042	+HSX11762.1=1, enable dynamic screensaver
	1043	+)))
	1044	+|=(% style="width: 160px;" %)(((
	1045	+HSW11763
	1046	+)))|(% style="width:282px" %)(((
	1047	+Waiting time to enter the dynamic screensaver
	1048	+)))|(% style="width:452px" %)(((
	1049	+Waiting time when the screen is not operated, range 1~~720 minutes
	1050	+)))
	1051	+|=(% style="width: 160px;" %)(((
	1052	+HSW11764
	1053	+)))|(% style="width:282px" %)(((
	1054	+Animated screensaver animation type
	1055	+)))|(% style="width:452px" %)(((
	1056	+~=0: Raster,=1: Blinds,=2: Bubble
	1057	+)))
	1058	+
781	781	== Serial port communication configuration ==
782	782
783	783	(% class="table-bordered" %)

6.png

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.Mora

Size

...	...	@@ -1,0 +1,1 @@
	1	+20.1 KB

Content