Skip to Content

Changes for page 13 HMI Internal Registers

Last modified by Jett on 2025/04/28 16:07
From version 2.1
edited by Hunter
on 2022/07/09 11:59
Change comment: There is no comment for this version
To version 19.1
edited by Hunter
on 2023/02/18 14:04
Change comment: There is no comment for this version

Summary

Details

Page properties
Parent
... ... @@ -1,1 +1,1 @@
1 -PIStudio.1 User Manual.WebHome
1 +PIStudio.WebHome
Content
... ... @@ -4,28 +4,40 @@
4 4  
5 5  *HSW, HDW, HUW, HAW are word address, HSX, HDX, HUX, HAX are bit address.
6 6  
7 -1. **System data area (HSW): **A special register defined by the system.
8 -1. **Data storage area (HDW/HDX): **Users store user data.
9 -1. **System data area (HUW): **A special register defined by the system.
10 -1. **System Data (HAW)**: System register used for power-off save.
11 -1. **Recipe index area (RPW): **System register used for recipe index.
7 +* **System data area (HSW): **A special register defined by the system.
8 +* **Data storage area (HDW/HDX): **Users store user data.
9 +* **System data area (HUW): **A special register defined by the system.
10 +* **System Data (HAW)**: System register used for power-off save.
11 +* **Recipe index area (RPW): **System register used for recipe index.
12 12  
13 13  HMI internal registers are divided into bit address and word address, which can be accessed in two ways (take HDW as an example).
14 14  
15 -1. Access as word with the prefix "HDW".
15 +* Access as word with the prefix "HDW".
16 +** HDW0 means the 1st word of system data area. HDW1 means the 2nd word of system data area.
17 +* Access as bit with the prefix "HDX".  The number before "." i".  The number before Access in bit with the prefix "HD".  The number before Access in bit with the prefix "HDX". The number before "." indicates the number of the word. The number after "." indicates the bit number of the word.
18 +** HDX1020.12 means to access the system data area in bit mode, the specific location is the 13th bit of the 1020 word.
16 16  
17 -* HDW0 means the 1st word of system data area. HDW1 means the 2nd word of system data area.
18 -
19 -(% start="2" %)
20 -1. Access as bit with the prefix "HDX".  The number before "." i".  The number before Access in bit with the prefix "HD".  The number before Access in bit with the prefix "HDX". The number before "." indicates the number of the word. The number after "." indicates the bit number of the word.
21 -
22 -* HDX1020.12 means to access the system data area in bit mode, the specific location is the 13th bit of the 1020 word.
23 -
20 +(% class="box infomessage" %)
21 +(((
24 24  **✎Note:**
25 25  
26 26  * Addresses in HDX are the bits from words in HDW, so be careful when using addresses. For example, HDX1020.12 is the 13th bit to access the 1020 word. The value of this bit is the same as that of the word accessed through HDW001020. The 13th bit of this word is actually the same bit as HDX1020.12.
27 27  * The address of the bit address HDX is with a decimal point while word addresses are integers.
26 +)))
28 28  
28 += Address ranges table =
29 +
30 +|=(% scope="row" style="width: 218px;" %)Address Type\HMI Series|=(% style="width: 228px;" %)General Series|=(% style="width: 200px;" %)i Series/HMI+ models|=(% style="width: 136px;" %)ie Series|=(% style="width: 232px;" %)ig Series
31 +|=(% style="width: 218px;" %)HDW|(% style="width:228px" %)HDW0-HDW299999|HDW0-HDW299999|HDW0-HDW299999|HDW0-HDW299999
32 +|=(% style="width: 218px;" %)HSW|(% style="width:228px" %)HSW0-HSW14999|HSW0-HSW14999|HSW0-HSW14999|HSW0-HSW14999
33 +|=(% style="width: 218px;" %)HAW|(% style="width:228px" %)HAW0-HAW199999|HAW0-HAW199999|HAW0-HAW199999|HAW0-HAW199999
34 +|=(% style="width: 218px;" %)HUW|(% style="width:228px" %)HUW0-HUW1599|HUW0-HUW1599|HUW0-HUW1599|HUW0-HUW1599
35 +|=(% style="width: 218px;" %)HDX|(% style="width:228px" %)HDX0.0-HDX299999.15|HDX0.0-HDX299999.15|HDX0.0-HDX299999.15|HDX0.0-HDX299999.15
36 +|=(% style="width: 218px;" %)HSX|(% style="width:228px" %)HSX0.0-HSX14999.15|HSX0.0-HSX14999.15|HSX0-HSX14999.15|HSX0.0-HSX14999.15
37 +|=(% style="width: 218px;" %)HAX|(% style="width:228px" %)HAX0.0-HAX199999.15|HAX0.0-HAX199999.15|HAX0.0-HAX199999.15|HAX0.0-HAX199999.15
38 +|=(% style="width: 218px;" %)HUX|(% style="width:228px" %)HUX0.0-HUX1599.15|HUX0.0-HUX1599.15|HUX0.0-HUX1599.15|HUX0.0-HUX1599.15
39 +|=(% style="width: 218px;" %)RPW|(% style="width:228px" %) |RPW000000-RPW990450|RPW000000-RPW990450|RPW000000-RPW990450
40 +
29 29  = **Data storage area (HDW/HDX)** =
30 30  
31 31  It is used to save the temporary data of project.
... ... @@ -40,10 +40,13 @@
40 40  1. Access as word, and serial number range is from HAW0 to HAW199999.
41 41  1. Access as bit, and serial number range is from HAX0.0 to HAX199999.15.
42 42  
55 +(% class="box infomessage" %)
56 +(((
43 43  **✎Note:**
44 44  
45 45  * HAW/HAX is power-down retention. The register of this type is able to save the data before the power-down.
46 46  * To avoid possible device failure, do not immediately power off and reboot when configuring the power-down save addre
61 +)))
47 47  
48 48  = **Recipe index area (RPW)** =
49 49  
... ... @@ -239,8 +239,8 @@
239 239  * =2: HSX521.1=1, delete all trend graph.
240 240  * =4: HSX521.2=1, delete all alarms.
241 241  * =16: HSX521.4=1, delete history XY plot.
242 -* =32: HSX521.5=1, delete data records in SD card or flash dish;(Please make a setting which is saved to flash disk or SD card in project setting).
243 -* =64: HSX521.6=1, delete alarms records in SD card or flash dish; (Please make a setting which is saved to flash disk or SD card in project setting).
257 +* =32: HSX521.5=1, delete data records in SD card or USB flash disk;(Please make a setting which is saved to USB flash disk or SD card in project setting).
258 +* =64: HSX521.6=1, delete alarms records in SD card or USB flash disk; (Please make a setting which is saved to USB flash disk or SD card in project setting).
244 244  )))
245 245  |=(% style="width: 160px;" %)HSW522|(% style="width:282px" %)Copy and paste the alarm/data files in flash to the USB flash disk|(% style="width:452px" %)(((
246 246  * =0: No operation
... ... @@ -337,9 +337,11 @@
337 337  * HDX882.1=0 SD card doesn't execute storage or storage finished.
338 338  * HDX882.1=1 SD card is reading data, don't remove SD card.
339 339  )))
340 -|=(% style="width: 160px;" %)HSW884|(% style="width:282px" %)Enter setup screen|(% style="width:452px" %)(((
341 -* = 0: Do not into setup screen
342 -* = 1: Enter setup screen
355 +|=(% style="width: 160px;" %)HSW884|(% style="width:282px" %)Enter the system network configuration interface|(% style="width:452px" %)(((
356 +* =0: Do not enter the network configuration interface
357 +* =1: Enter the system network configuration interface.
358 +** ig series HMI only supports to enter the system interface
359 +
343 343  )))
344 344  |=(% style="width: 160px;" %)HSW885|(% style="width:282px" %)When the control object hides the address is read failed (communication failure), set the display mode of the object|(% style="width:452px" %)(((
345 345  * = 0: displayed by object setting.
... ... @@ -481,6 +481,8 @@
481 481  * =0, Default value
482 482  * =1, Release the alarm generated before the last power-down when starting up
483 483  )))
501 +|=(% style="width: 160px;" %)HSW1200|(% colspan="1" rowspan="2" style="width:282px" %)TSAP settings for HMI in the Siemens LOGO! 8 protocol(ig series or HMI V2.0)|(% style="width:452px" %)HMI local TSAP, which corresponds to the remote TSAP of PLC
502 +|=(% style="width: 160px;" %)HSW1201|(% style="width:452px" %)HMI remote TSAP, which corresponds to the local TSAP of PLC
484 484  |=(% style="width: 160px;" %)HSW1450|(% style="width:282px" %)Enable objects level password function|(% style="width:452px" %)(((
485 485  * =0, Disable
486 486  * =1, Enable
... ... @@ -508,6 +508,10 @@
508 508  * HSX1502.0=1: Modification comfirmed. Save the data of HSW1450~~HSW1501 to a file for immediate effect.
509 509  * HSX1502.1=1:Modification cancelled. Restore the current data of hSW1450-HSW1501 to the data saved in the file last time.
510 510  )))
530 +|=(% style="width: 160px;" %)HSW1509|(% style="width:282px" %)Curve width|(% style="width:452px" %)(((
531 +* =0: Use the curve width set by project default.
532 +* =1 to 10: use special register to set curve width.
533 +)))
511 511  |=(% style="width: 160px;" %)HSW1603|(% style="width:282px" %)Number of current unreleased alarms|(% style="width:452px" %)The number of current unreleased alarms in alarm record file.
512 512  |=(% style="width: 160px;" %)HSW1604|(% style="width:282px" %)The auxiliary judgment address when the control bit in the Object Lock fails to be read|(% style="width:452px" %)(((
513 513  * =0: The auxiliary address is invalid.
... ... @@ -583,6 +583,9 @@
583 583  * =0: Server connection exception
584 584  * =1: Server connection is OK
585 585  )))
609 +|=(% style="width: 160px;" %)HSW1740|(% style="width:282px" %)Wi-fi signal strength|(% style="width:452px" %)(((
610 +Display the value of Wi-fi signal signal strength, ranges from 0~~100 (Signal strength is automatically obtained only once when HMI is powered on, and it will not be automatically updated. It needs to be used with the HSW1890)
611 +)))
586 586  |=(% style="width: 160px;" %)HSW1741|(% colspan="1" rowspan="12" style="width:282px" %)Related IP register in 4Gnetwork status (It is valid when HMI is connected to 4G)|(% style="width:452px" %)Local IP address high byte 1
587 587  |=(% style="width: 160px;" %)HSW1742|(% style="width:452px" %)Local IP address high byte 2
588 588  |=(% style="width: 160px;" %)HSW1743|(% style="width:452px" %)Local IP address high byte 3
... ... @@ -610,10 +610,180 @@
610 610  * =1: Server connection is OK
611 611  )))
612 612  |=(% style="width: 160px;" %)HSW1761|(% style="width:282px" %)Display 4G network signal strength|(% style="width:452px" %)Signal strength: 0~~31. The greater the value ,the signal is stronger
639 +|=(% style="width: 160px;" %)(((
640 +HSW1762
641 +)))|(% colspan="1" rowspan="13" style="width:282px" %)(((
642 +Note: Valid when Ethernet2 of HMI is plugged into the network cable.
643 +①、When the Ethernet setting is enabled in the project parameters, this register displays the set value.
644 +②. When the Ethernet setting is not enabled in the engineering parameters, the register displays the Ethernet IP automatically acquired by the HMI.
645 +③. When the HMI is not plugged into the network cable, the register will show 0 whether the engineering parameters are set or not.
646 +④.IP related registers can be read and written (only static IP mode can be written).
647 +)))|(% style="width:452px" %)(((
648 +Ethernet2 Local IP address high byte 1
649 +)))
650 +|=(% style="width: 160px;" %)(((
651 +HSW1763
652 +)))|(% style="width:452px" %)(((
653 +Ethernet2 Local IP address high byte 2
654 +)))
655 +|=(% style="width: 160px;" %)(((
656 +HSW1764
657 +)))|(% style="width:452px" %)(((
658 +Ethernet2 Local IP address high byte 3
659 +)))
660 +|=(% style="width: 160px;" %)(((
661 +HSW1765
662 +)))|(% style="width:452px" %)(((
663 +Ethernet2 Local IP address high byte 4
664 +)))
665 +|=(% style="width: 160px;" %)(((
666 +HSW1766
667 +)))|(% style="width:452px" %)(((
668 +Ethernet2 Local mask IP address high byte 1
669 +)))
670 +|=(% style="width: 160px;" %)(((
671 +HSW1767
672 +)))|(% style="width:452px" %)(((
673 +Ethernet2 Local mask IP address high byte 2
674 +)))
675 +|=(% style="width: 160px;" %)(((
676 +HSW1768
677 +)))|(% style="width:452px" %)Ethernet2 Local mask IP address high byte 3
678 +|=(% style="width: 160px;" %)HSW1769|(% style="width:452px" %)Ethernet2 Local mask IP address high byte 4
679 +|=(% style="width: 160px;" %)(((
680 +HSW1770
681 +)))|(% style="width:452px" %)(((
682 +Ethernet2 Local gateway IP address high byte 1
683 +)))
684 +|=(% style="width: 160px;" %)(((
685 +HSW1771
686 +)))|(% style="width:452px" %)(((
687 +Ethernet2 Local gateway IP address high byte 2
688 +)))
689 +|=(% style="width: 160px;" %)(((
690 +HSW1772
691 +)))|(% style="width:452px" %)(((
692 +Ethernet2 Local gateway IP address high byte 3
693 +)))
694 +|=(% style="width: 160px;" %)(((
695 +HSW1773
696 +)))|(% style="width:452px" %)(((
697 +Ethernet2 Local gateway IP address high byte 4
698 +)))
699 +|=(% style="width: 160px;" %)(((
700 +HSW1774
701 +)))|(% style="width:452px" %)(((
702 +Ethernet2 Local Port Address
703 +)))
704 +|=(% style="width: 160px;" %)(((
705 +HSW1775
706 +)))|(% colspan="1" rowspan="6" style="width:282px" %)(((
707 +①Display the MAC code of Ethernet2 NIC
708 +
709 +(hexadecimal display)
710 +
711 +②Read-only mode, not modifiable
712 +)))|(% style="width:452px" %)(((
713 +Ethernet2 Local MAC code high byte 1
714 +)))
715 +|=(% style="width: 160px;" %)(((
716 +HSW1776
717 +)))|(% style="width:452px" %)(((
718 +Ethernet2 Local MAC code high byte 2
719 +)))
720 +|=(% style="width: 160px;" %)(((
721 +HSW1777
722 +)))|(% style="width:452px" %)(((
723 +Ethernet2 Local MAC code high byte 3
724 +)))
725 +|=(% style="width: 160px;" %)(((
726 +HSW1778
727 +)))|(% style="width:452px" %)(((
728 +Ethernet2 Local MAC code high byte 4
729 +)))
730 +|=(% style="width: 160px;" %)(((
731 +HSW1779
732 +)))|(% style="width:452px" %)(((
733 +Ethernet2 Local MAC code high byte 5
734 +)))
735 +|=(% style="width: 160px;" %)(((
736 +HSW1780
737 +)))|(% style="width:452px" %)(((
738 +Ethernet2 Local MAC code high byte 6
739 +)))
740 +|=(% style="width: 160px;" %)(((
741 +HSW1781
742 +)))|(% colspan="1" rowspan="8" style="width:282px" %)(((
743 +①Display and modify DNS1 and DNS2 of Ethernet2
744 +
745 +②Related registers can be read and written mode (only static IP mode can be written)
746 +)))|(% style="width:452px" %)(((
747 +Ethernet2 Local DNS1 address high byte 1
748 +)))
749 +|=(% style="width: 160px;" %)(((
750 +HSW1782
751 +)))|(% style="width:452px" %)(((
752 +Ethernet2 Local DNS1 address high byte 2
753 +)))
754 +|=(% style="width: 160px;" %)(((
755 +HSW1783
756 +)))|(% style="width:452px" %)(((
757 +Ethernet2 Local DNS1 address high byte 3
758 +)))
759 +|=(% style="width: 160px;" %)(((
760 +HSW1784
761 +)))|(% style="width:452px" %)(((
762 +Ethernet2 Local DNS1 address high byte 4
763 +)))
764 +|=(% style="width: 160px;" %)(((
765 +HSW1785
766 +)))|(% style="width:452px" %)(((
767 +Ethernet2 Local DNS2 address high byte 1
768 +)))
769 +|=(% style="width: 160px;" %)(((
770 +HSW1786
771 +)))|(% style="width:452px" %)(((
772 +Ethernet2 Local DNS2 address high byte 2
773 +)))
774 +|=(% style="width: 160px;" %)(((
775 +HSW1787
776 +)))|(% style="width:452px" %)(((
777 +Ethernet2 Local DNS2 address high byte 3
778 +)))
779 +|=(% style="width: 160px;" %)(((
780 +HSW1788
781 +)))|(% style="width:452px" %)(((
782 +Ethernet2 Local DNS2 address high byte 4
783 +)))
784 +|=(% style="width: 160px;" %)(((
785 +HSW1789
786 +)))|(% colspan="1" style="width:282px" %)(((
787 +Display or set the dynamic or static IP mode of Ethernet2
788 +)))|(% style="width:452px" %)(((
789 +HSX1789.0 = 0, Static IP mode
790 +
791 +HSX1789.0 = 1, dynamic IP mode
792 +)))
793 +|=(% style="width: 160px;" %)(((
794 +HSW1790
795 +)))|(% colspan="1" style="width:282px" %)(((
796 +Confirm Ethernet2 IP, subnet mask, gateway, DNS1, DNS2, and dynamic static IP settings
797 +)))|(% style="width:452px" %)(((
798 +~= 1, confirm the setting (i.e., after modifying IP-related information, set this address to 1, representing confirmation of the modification, after which it will be reset to 0)
799 +)))
800 +|=(% style="width: 160px;" %)(((
801 +HSW1791
802 +)))|(% colspan="1" style="width:282px" %)(((
803 +Network status of the Ethernet2 connection server
804 +)))|(% style="width:452px" %)(((
805 +~= 0, connection to the server is abnormal = 1, connection to the server is normal
806 +)))
613 613  |=(% style="width: 160px;" %)HSW1852|(% style="width:282px" %)Control the interval in two consecutive clicks|(% style="width:452px" %)Limit range: 1~~500ms. The default is 100 ms.
614 614  |=(% style="width: 160px;" %)HSW1853|(% style="width:282px" %)File format for exporting data records to USB flash drive or SD card|(% style="width:452px" %)(((
615 615  * =0: db database
616 616  * =1: CSV
811 +
812 +(Only valid for script function DbToCsvFile)
617 617  )))
618 618  |=(% style="width: 160px;" %)HSW1854|(% style="width:282px" %)High and low word conversion type|(% style="width:452px" %)(((
619 619  * =0: use the old high-low word conversion (default)
... ... @@ -635,14 +635,96 @@
635 635  * =1: download firmware
636 636  * =2: enter the background
637 637  )))
834 +|=(% style="width: 160px;" %)HSW1865|(% style="width:282px" %)Priority connection to the cloud|(% style="width:452px" %)(((
835 +* =0: priority Ethernet
836 +* =1: priority WLAN
837 +* =2: priority 4G
838 +)))
839 +|=(% style="width: 160px;" %)HSW1866|(% style="width:282px" %)Delete the Lua extension module file|(% style="width:452px" %)(((
840 +* =0: delete;
841 +* = Others: do not delete
842 +)))
843 +|=(% style="width: 160px;" %)HSW1867|(% style="width:282px" %)Reset mode|(% style="width:452px" %)(((
844 +Monitor address is set during reset of reset switch, whether to cancel reset,
845 +
846 +* = 0: yes (default);
847 +* = 1: no
848 +)))
849 +|=(% style="width: 160px;" %)HSW1868|(% style="width:282px" %)Double-click or long press the record type table mode|(% style="width:452px" %)(((
850 +Controls whether the button pops up when double-clicking or long pressing on record type table object
851 +
852 +* = 0: yes (default);
853 +* = 1: no
854 +)))
855 +|=(% style="width: 160px;" %)(((
856 +HSW1869
857 +)))|(% style="width:282px" %)(((
858 +Dynamic screensaver countdown
859 +)))|(% style="width:452px" %)(((
860 +Countdown to enter dynamic screensaver effect, unit (S)
861 +)))
862 +|=(% style="width: 160px;" %)(((
863 +HSW1870
864 +)))|(% style="width:282px" %)(((
865 +Display or set the dynamic or static IP mode of Ethernet1
866 +)))|(% style="width:452px" %)(((
867 +HSX1870.0 = 0, Static IP mode
868 +
869 +HSX1870.0 = 1, dynamic IP mode
870 +)))
871 +|=(% style="width: 160px;" %)(((
872 +HSW1871
873 +)))|(% style="width:282px" %)(((
874 +Confirm the IP, subnet mask, gateway, DNS1, DNS2, and dynamic static IP settings for Ethernet1
875 +)))|(% style="width:452px" %)(((
876 +~= 1, confirm the setting (i.e., after modifying IP-related information, set this address to 1, representing confirmation of the modification, after which it will be reset to 0)
877 +)))
878 +|=(% style="width: 160px;" %)(((
879 +HSW1872
880 +)))|(% colspan="1" rowspan="8" style="width:282px" %)(((
881 +①Display and modify DNS1 and DNS2 of Ethernet1
882 +
883 +②Related registers can be read and written mode (only static IP mode can be written)
884 +)))|(% style="width:452px" %)(((
885 +Ethernet1 Local DNS1 address high byte 1
886 +)))
887 +|=(% style="width: 160px;" %)(((
888 +HSW1873
889 +)))|(% style="width:452px" %)Ethernet1 Local DNS1 address high byte 2
890 +|=(% style="width: 160px;" %)(((
891 +HSW1874
892 +)))|(% style="width:452px" %)Ethernet1 Local DNS1 address high byte 3
893 +|=(% style="width: 160px;" %)(((
894 +HSW1875
895 +)))|(% style="width:452px" %)Ethernet1 Local DNS1 address high byte 4
896 +|=(% style="width: 160px;" %)(((
897 +HSW1876
898 +)))|(% style="width:452px" %)Ethernet1 Local DNS2 address high byte 1
899 +|=(% style="width: 160px;" %)(((
900 +HSW1877
901 +)))|(% style="width:452px" %)Ethernet1 Local DNS2 address high byte 2
902 +|=(% style="width: 160px;" %)(((
903 +HSW1878
904 +)))|(% style="width:452px" %)Ethernet1 Local DNS2 address high byte 3
905 +|=(% style="width: 160px;" %)(((
906 +HSW1879
907 +)))|(% style="width:452px" %)Ethernet1 Local DNS2 address high byte 4
908 +|=(% style="width: 160px;" %)HSW1890|(% colspan="1" style="width:282px" %)Enable refresh current network signal|(% style="width:452px" %)(((
909 +* =1: Refresh the network signal once after triggered (This register will be automatically reset after triggered, only update the signal value once after per 15 seconds, not able to update twice in the short interval)
910 +* =Others: not refresh
911 +)))
912 +|=(% style="width: 160px;" %)HSW1891|(% colspan="1" style="width:282px" %)Enable clear cache for screen data  |(% style="width:452px" %)(((
913 +* =1, not clear screen cache when switch language
914 +* =2, trigger clear cache of all screens for once time
915 +* =3, always clear cache of all screen data
916 +)))
638 638  |=(% style="width: 160px;" %)HSW10000~~19999|(% style="width:282px" %)Power-down storage area|(% style="width:452px" %)After restart, the data remains
639 639  |=(% style="width: 160px;" %)HSW10035|(% rowspan="13" style="width:282px" %)(((
640 -**✎Note: **Only valid when the HMI is plugged into the Ethernet cable.
641 -
642 -1. If Ethernet settings is enabled in project parameters, this register displays the set value.
643 -1. If Ethernet settings is not enabled in project parameters, IP would automatically obtained IP.
644 -1. If HMI is not connected to the network, the register is displayed as 0 whether the engineering parameters are set.
645 -1. 4. All IP registers of HMI are read-only.
919 +Note: Valid when Ethernet1 of HMI is plugged into the network cable.
920 +①、When the Ethernet setting is enabled in the project parameters, this register displays the set value.
921 +②. When the Ethernet setting is not enabled in the engineering parameters, the register displays the Ethernet IP automatically acquired by the HMI.
922 +③. When the HMI is not plugged into the network cable, the register will show 0 whether the engineering parameters are set or not.
923 +④.IP related registers can be read and written (only static IP mode can be written).
646 646  )))|(% style="width:452px" %)Local IP address high byte 1
647 647  |=(% style="width: 160px;" %)HSW10036|(% style="width:452px" %)Local IP address high byte 2
648 648  |=(% style="width: 160px;" %)HSW10037|(% style="width:452px" %)Local IP address high byte 3
... ... @@ -657,9 +657,11 @@
657 657  |=(% style="width: 160px;" %)HSW10046|(% style="width:452px" %)Local gateway address high byte 4
658 658  |=(% style="width: 160px;" %)HSW10047|(% style="width:452px" %)Local port address
659 659  |=(% style="width: 160px;" %)HSW10048|(% rowspan="6" style="width:282px" %)(((
660 -Displays the MAC code of the current network card
938 +①Display the MAC code of Ethernet1 NIC
661 661  
662 -(Hexadecimal display)
940 +(hexadecimal display)
941 +
942 +②Read-only mode, not modifiable
663 663  )))|(% style="width:452px" %)Local MAC code high word 1
664 664  |=(% style="width: 160px;" %)HSW10049|(% style="width:452px" %)Local MAC code high word 2
665 665  |=(% style="width: 160px;" %)HSW10050|(% style="width:452px" %)Local MAC code high word 3
... ... @@ -666,7 +666,7 @@
666 666  |=(% style="width: 160px;" %)HSW10051|(% style="width:452px" %)Local MAC code high word 4
667 667  |=(% style="width: 160px;" %)HSW10052|(% style="width:452px" %)Local MAC code high word 5
668 668  |=(% style="width: 160px;" %)HSW10053|(% style="width:452px" %)Local MAC code high word 6
669 -|=(% style="width: 160px;" %)HSW10118|(% colspan="1" rowspan="2" style="width:282px" %)TSAP settings for HMI in the Siemens logo! 8 protocol|(% style="width:452px" %)HMI local TSAP, which corresponds to the remote TSAP of PLC
949 +|=(% style="width: 160px;" %)HSW10118|(% colspan="1" rowspan="2" style="width:282px" %)TSAP settings for HMI in the Siemens LOGO! 8 protocol|(% style="width:452px" %)HMI local TSAP, which corresponds to the remote TSAP of PLC
670 670  |=(% style="width: 160px;" %)HSW10119|(% style="width:452px" %)HMI remote TSAP, which corresponds to the local TSAP of PLC
671 671  |=(% style="width: 160px;" %)HSW10461~~10493|(% style="width:282px" %)Remote access password|(% style="width:452px" %)8-character remote access password
672 672  |=(% style="width: 160px;" %)HSW10494~~10558|(% style="width:282px" %)Machine ID (Read only)|(% style="width:452px" %)Machine ID for remote access (read only 64-bit)
... ... @@ -748,11 +748,38 @@
748 748  )))
749 749  |=(% style="width: 160px;" %)HSW11760|(% style="width:282px" %)Screensaver countdown|(% style="width:452px" %)Display the countdown to enter the Screensaver, unit: second.
750 750  |=(% style="width: 160px;" %)HSW11761|(% style="width:282px" %)Screensaver screen number|(% style="width:452px" %)Set the screen number for Screensaver
1031 +|=(% style="width: 160px;" %)(((
1032 +HSW11762
1033 +)))|(% style="width:282px" %)(((
1034 +Dynamic screensaver control address
1035 +)))|(% style="width:452px" %)(((
1036 +HSX11762.0=0, initialize with project configuration;
751 751  
752 -== **Serial port communication configuration** ==
1038 +HSX11762.0=1, initialize with special register configuration;
753 753  
1040 +HSX11762.1=0, disable dynamic screensaver;
1041 +
1042 +HSX11762.1=1, enable dynamic screensaver
1043 +)))
1044 +|=(% style="width: 160px;" %)(((
1045 +HSW11763
1046 +)))|(% style="width:282px" %)(((
1047 +Waiting time to enter the dynamic screensaver
1048 +)))|(% style="width:452px" %)(((
1049 +Waiting time when the screen is not operated, range 1~~720 minutes
1050 +)))
1051 +|=(% style="width: 160px;" %)(((
1052 +HSW11764
1053 +)))|(% style="width:282px" %)(((
1054 +Animated screensaver animation type
1055 +)))|(% style="width:452px" %)(((
1056 +~=0: Raster,=1: Blinds,=2: Bubble
1057 +)))
1058 +
1059 +== Serial port communication configuration ==
1060 +
754 754  (% class="table-bordered" %)
755 -|=(% style="width: 102px;" %)Port|=(% style="width: 173px;" %)**Function**|=(% style="width: 122px;" %)**Address**|=(% colspan="2" style="width: 506px;" %)**Description**
1062 +|=(% scope="row" style="width: 102px;" %)Port|=(% style="width: 173px;" %)**Function**|=(% style="width: 122px;" %)**Address**|=(% colspan="2" style="width: 506px;" %)**Description**
756 756  |(% colspan="1" rowspan="11" style="width:102px" %)COM1|(% style="width:173px" %)Communication mode|(% style="width:122px" %)HSW10061|(% colspan="2" style="width:506px" %)(((
757 757  * =0: RS232
758 758  * =1: RS485
... ... @@ -782,10 +782,22 @@
782 782  * =1: ODD
783 783  * =2: EVEN
784 784  )))
785 -|(% style="width:173px" %)Wait timeout|(% style="width:122px" %)HSW10066|(% colspan="2" style="width:506px" %)Unit: ms. Range: 0~~30000
786 -|(% style="width:173px" %)reveive timeout|(% style="width:122px" %)HSW10067|(% colspan="2" style="width:506px" %)Unit: ms. Range: 0~~30000
787 -|(% style="width:173px" %)Retry time|(% style="width:122px" %)HSW10068|(% colspan="2" style="width:506px" %)Unit: times. Range: 0~~100
788 -|(% style="width:173px" %)Retry timeout|(% style="width:122px" %)HSW10069|(% colspan="2" style="width:506px" %)Unit: s. Range: 0~~300
1092 +|(% style="width:173px" %)Wait timeout|(% style="width:122px" %)HSW10066|(% colspan="2" style="width:506px" %)(((
1093 +* Unit: ms.
1094 +* Range: 0 to 30000
1095 +)))
1096 +|(% style="width:173px" %)reveive timeout|(% style="width:122px" %)HSW10067|(% colspan="2" style="width:506px" %)(((
1097 +* Unit: ms.
1098 +* Range: 0 to 30000
1099 +)))
1100 +|(% style="width:173px" %)Retry time|(% style="width:122px" %)HSW10068|(% colspan="2" style="width:506px" %)(((
1101 +* Unit: times.
1102 +* Range: 0 to 100
1103 +)))
1104 +|(% style="width:173px" %)Retry timeout|(% style="width:122px" %)HSW10069|(% colspan="2" style="width:506px" %)(((
1105 +* Unit: s.
1106 +* Range: 0 to 300
1107 +)))
789 789  |(% style="width:173px" %)HMI station number|(% style="width:122px" %)HSW10070|(% colspan="2" style="width:506px" %)
790 790  |(% style="width:173px" %)PLC station number|(% style="width:122px" %)HSW10071|(% colspan="2" style="width:506px" %)
791 791  |(% colspan="1" rowspan="11" style="width:102px" %)COM1-2|(% style="width:173px" %)Communication mode|(% style="width:122px" %)HSW10094|(% colspan="2" style="width:506px" %)(((
... ... @@ -818,10 +818,22 @@
818 818  * =1: ODD
819 819  * =2: EVEN
820 820  )))
821 -|(% style="width:173px" %)Wait timeout|(% style="width:122px" %)HSW10099|(% colspan="2" style="width:506px" %)Unit: ms. Range: 0~~30000
822 -|(% style="width:173px" %)receive timeout|(% style="width:122px" %)HSW10100|(% colspan="2" style="width:506px" %)Unit: ms. Range: 0~~30000
823 -|(% style="width:173px" %)Retry time|(% style="width:122px" %)HSW10101|(% colspan="2" style="width:506px" %)Unit: times. Range: 0~~100
824 -|(% style="width:173px" %)Retry timeout|(% style="width:122px" %)HSW10102|(% colspan="2" style="width:506px" %)Unit: s. Range: 0~~30
1140 +|(% style="width:173px" %)Wait timeout|(% style="width:122px" %)HSW10099|(% colspan="2" style="width:506px" %)(((
1141 +* Unit: ms.
1142 +* Range: 0 to 30000
1143 +)))
1144 +|(% style="width:173px" %)receive timeout|(% style="width:122px" %)HSW10100|(% colspan="2" style="width:506px" %)(((
1145 +* Unit: ms.
1146 +* Range: 0 to 30000
1147 +)))
1148 +|(% style="width:173px" %)Retry time|(% style="width:122px" %)HSW10101|(% colspan="2" style="width:506px" %)(((
1149 +* Unit: times.
1150 +* Range: 0 to 100
1151 +)))
1152 +|(% style="width:173px" %)Retry timeout|(% style="width:122px" %)HSW10102|(% colspan="2" style="width:506px" %)(((
1153 +* Unit: s.
1154 +* Range: 0 to 30
1155 +)))
825 825  |(% style="width:173px" %)HMI station number|(% style="width:122px" %)HSW10103|(% colspan="2" style="width:506px" %)
826 826  |(% style="width:173px" %)PLC station number|(% style="width:122px" %)HSW10104|(% colspan="2" style="width:506px" %)
827 827  |(% colspan="1" rowspan="11" style="width:102px" %)COM1-3|(% style="width:173px" %)Communication mode|(% style="width:122px" %)HSW10120|(% colspan="2" style="width:506px" %)(((
... ... @@ -854,10 +854,22 @@
854 854  * =1: ODD
855 855  * =2: EVEN
856 856  )))
857 -|(% style="width:173px" %)Wait timeout|(% style="width:122px" %)HSW10125|(% colspan="2" style="width:506px" %)Unit: ms. Range: 0~~30000
858 -|(% style="width:173px" %)receive timeout|(% style="width:122px" %)HSW10126|(% colspan="2" style="width:506px" %)Unit: ms. Range: 0~~30000
859 -|(% style="width:173px" %)Retry time|(% style="width:122px" %)HSW10127|(% colspan="2" style="width:506px" %)Unit: times. Range: 0~~100
860 -|(% style="width:173px" %)Retry timeout|(% style="width:122px" %)HSW10128|(% colspan="2" style="width:506px" %)Unit: s. Range: 0~~30
1188 +|(% style="width:173px" %)Wait timeout|(% style="width:122px" %)HSW10125|(% colspan="2" style="width:506px" %)(((
1189 +* Unit: ms.
1190 +* Range: 0 to 30000
1191 +)))
1192 +|(% style="width:173px" %)receive timeout|(% style="width:122px" %)HSW10126|(% colspan="2" style="width:506px" %)(((
1193 +* Unit: ms.
1194 +* Range: 0 to 30000
1195 +)))
1196 +|(% style="width:173px" %)Retry time|(% style="width:122px" %)HSW10127|(% colspan="2" style="width:506px" %)(((
1197 +* Unit: times.
1198 +* Range: 0 to 100
1199 +)))
1200 +|(% style="width:173px" %)Retry timeout|(% style="width:122px" %)HSW10128|(% colspan="2" style="width:506px" %)(((
1201 +* Unit: s.
1202 +* Range: 0 to 30
1203 +)))
861 861  |(% style="width:173px" %)HMI station number|(% style="width:122px" %)HSW10129|(% colspan="2" style="width:506px" %)
862 862  |(% style="width:173px" %)PLC station number|(% style="width:122px" %)HSW10130|(% colspan="2" style="width:506px" %)
863 863  |(% colspan="1" rowspan="11" style="width:102px" %)COM2|(% style="width:173px" %)Communication mode|(% style="width:122px" %)HSW10072|(% colspan="2" style="width:506px" %)(((
... ... @@ -888,10 +888,22 @@
888 888  * =1: ODD
889 889  * =2: EVEN
890 890  )))
891 -|(% style="width:173px" %)Wait timeout|(% style="width:122px" %)HSW10077|(% colspan="2" style="width:506px" %)Unit: ms. Range: 0~~30000
892 -|(% style="width:173px" %)receive timeout|(% style="width:122px" %)HSW10078|(% colspan="2" style="width:506px" %)Unit: ms. Range: 0~~30000
893 -|(% style="width:173px" %)Retry time|(% style="width:122px" %)HSW10079|(% colspan="2" style="width:506px" %)Unit: times. Range: 0~~100
894 -|(% style="width:173px" %)Retry timeout|(% style="width:122px" %)HSW10080|(% colspan="2" style="width:506px" %)Unit: s. Range: 0~~30
1234 +|(% style="width:173px" %)Wait timeout|(% style="width:122px" %)HSW10077|(% colspan="2" style="width:506px" %)(((
1235 +* Unit: ms.
1236 +* Range: 0 to 30000
1237 +)))
1238 +|(% style="width:173px" %)receive timeout|(% style="width:122px" %)HSW10078|(% colspan="2" style="width:506px" %)(((
1239 +* Unit: ms.
1240 +* Range: 0 to 30000
1241 +)))
1242 +|(% style="width:173px" %)Retry time|(% style="width:122px" %)HSW10079|(% colspan="2" style="width:506px" %)(((
1243 +* Unit: times.
1244 +* Range: 0 to 100
1245 +)))
1246 +|(% style="width:173px" %)Retry timeout|(% style="width:122px" %)HSW10080|(% colspan="2" style="width:506px" %)(((
1247 +* Unit: s.
1248 +* Range: 0 to 30
1249 +)))
895 895  |(% style="width:173px" %)HMI station number|(% style="width:122px" %)HSW10081|(% colspan="2" style="width:506px" %)
896 896  |(% style="width:173px" %)PLC station number|(% style="width:122px" %)HSW10082|(% colspan="2" style="width:506px" %)
897 897  |(% colspan="1" rowspan="11" style="width:102px" %)COM2-2|(% style="width:173px" %)Communication mode|(% style="width:122px" %)HSW10105|(% colspan="2" style="width:506px" %)(((
... ... @@ -922,10 +922,22 @@
922 922  * =1: ODD
923 923  * =2: EVEN
924 924  )))
925 -|(% style="width:173px" %)Wait timeout|(% style="width:122px" %)HSW10110|(% colspan="2" style="width:506px" %)Unit: ms. Range: 0~~30000
926 -|(% style="width:173px" %)receive timeout|(% style="width:122px" %)HSW10111|(% colspan="2" style="width:506px" %)Unit: ms. Range: 0~~30000
927 -|(% style="width:173px" %)Retry time|(% style="width:122px" %)HSW10112|(% colspan="2" style="width:506px" %)Unit: times. Range: 0~~100
928 -|(% style="width:173px" %)Retry timeout|(% style="width:122px" %)HSW10113|(% colspan="2" style="width:506px" %)Unit: s. Range: 0~~30
1280 +|(% style="width:173px" %)Wait timeout|(% style="width:122px" %)HSW10110|(% colspan="2" style="width:506px" %)(((
1281 +* Unit: ms.
1282 +* Range: 0 to 30000
1283 +)))
1284 +|(% style="width:173px" %)receive timeout|(% style="width:122px" %)HSW10111|(% colspan="2" style="width:506px" %)(((
1285 +* Unit: ms.
1286 +* Range: 0 to 30000
1287 +)))
1288 +|(% style="width:173px" %)Retry time|(% style="width:122px" %)HSW10112|(% colspan="2" style="width:506px" %)(((
1289 +* Unit: times.
1290 +* Range: 0 to 100
1291 +)))
1292 +|(% style="width:173px" %)Retry timeout|(% style="width:122px" %)HSW10113|(% colspan="2" style="width:506px" %)(((
1293 +* Unit: s.
1294 +* Range: 0 to 30
1295 +)))
929 929  |(% style="width:173px" %)HMI station number|(% style="width:122px" %)HSW10114|(% colspan="2" style="width:506px" %)
930 930  |(% style="width:173px" %)PLC station number|(% style="width:122px" %)HSW10115|(% colspan="2" style="width:506px" %)
931 931  |(% colspan="1" rowspan="11" style="width:102px" %)COM3|(% style="width:173px" %)Communication mode|(% style="width:122px" %)HSW10083|(% colspan="2" style="width:506px" %)(((
... ... @@ -955,29 +955,48 @@
955 955  * =1: ODD
956 956  * =2: EVEN
957 957  )))
958 -|(% style="width:173px" %)Wait timeout|(% style="width:122px" %)HSW10088|(% colspan="2" style="width:506px" %)Unit: ms. Range: 0~~30000
959 -|(% style="width:173px" %)receive timeout|(% style="width:122px" %)HSW10089|(% colspan="2" style="width:506px" %)Unit: ms. Range: 0~~30000
960 -|(% style="width:173px" %)Retry time|(% style="width:122px" %)HSW10090|(% colspan="2" style="width:506px" %)Unit: times. Range: 0~~100
961 -|(% style="width:173px" %)Retry timeout|(% style="width:122px" %)HSW10091|(% colspan="2" style="width:506px" %)Unit: s. Range: 0~~30
1325 +|(% style="width:173px" %)Wait timeout|(% style="width:122px" %)HSW10088|(% colspan="2" style="width:506px" %)(((
1326 +* Unit: ms.
1327 +* Range: 0 to 30000
1328 +)))
1329 +|(% style="width:173px" %)receive timeout|(% style="width:122px" %)HSW10089|(% colspan="2" style="width:506px" %)(((
1330 +* Unit: ms.
1331 +* Range: 0 to 30000
1332 +)))
1333 +|(% style="width:173px" %)Retry time|(% style="width:122px" %)HSW10090|(% colspan="2" style="width:506px" %)(((
1334 +* Unit: times.
1335 +* Range: 0 to 100
1336 +)))
1337 +|(% style="width:173px" %)Retry timeout|(% style="width:122px" %)HSW10091|(% colspan="2" style="width:506px" %)(((
1338 +* Unit: s.
1339 +* Range: 0 to 30
1340 +)))
962 962  |(% style="width:173px" %)HMI station number|(% style="width:122px" %)HSW10092|(% colspan="2" style="width:506px" %)
963 963  |(% style="width:173px" %)PLC station number|(% style="width:122px" %)HSW10093|(% colspan="2" style="width:506px" %)
964 964  |(% colspan="1" rowspan="2" style="width:102px" %)CAN port|(% style="width:173px" %)CAN1 baud rate|(% style="width:122px" %)HSW010116|(% style="width:299px" %)(((
965 -Unit: K, the baud rate must be an integer, for example, when the baud rate required is 250000, just enter 250.
1344 +Unit: K, the baud rate must be an integer.
1345 +
1346 +For example, when the baud rate required is 250000, just enter 250.
966 966  )))|(% colspan="1" rowspan="2" style="width:218px" %)**✎Note: **If baud rate has been modified,please wait 5 seconds,then restart the HMI to take effect.
967 -|(% style="width:173px" %)CAN2 baud rate|(% style="width:122px" %)HSW010117|(% style="width:299px" %)Unit: K, the baud rate must be an integer, for example, when the baud rate required is 250000, just enter 250.
1348 +|(% style="width:173px" %)CAN2 baud rate|(% style="width:122px" %)HSW010117|(% style="width:299px" %)(((
1349 +Unit: K, the baud rate must be an integer.
968 968  
969 -== **Ethernet communication configuration** ==
1351 +For example, when the baud rate required is 250000, just enter 250.
1352 +)))
970 970  
1354 +== Ethernet communication configuration ==
1355 +
971 971  (% class="table-bordered" %)
972 -|=(% style="width: 40px;" %)**No.**|=(% style="width: 295px;" %)**Function**|=(% style="width: 220px;" %)**Address**|=(% style="width: 336px;" %)**Description**
1357 +|(% style="width:40px" %)**No.**|(% style="width:295px" %)**Function**|(% style="width:220px" %)**Address**|(% style="width:336px" %)**Description**
973 973  |(% rowspan="7" style="width:40px" %)1|(% colspan="1" rowspan="7" style="width:295px" %)Ethernet parameter configuration for communication number 1 in list. Configure those addresses according to connected device. After configuration, wait for 5 seconds and restart the HMI.|(% style="width:220px" %)HSW11004|(% style="width:336px" %)Device IP address high word 1
974 974  |(% style="width:220px" %)HSW11005|(% style="width:336px" %)Device IP address high word 2
975 975  |(% style="width:220px" %)HSW11006|(% style="width:336px" %)Device IP address high word 3
976 976  |(% style="width:220px" %)HSW11007|(% style="width:336px" %)Device IP address high word 4
977 977  |(% style="width:220px" %)HSW11008|(% style="width:336px" %)Device Port number
978 -|(% style="width:220px" %)HSW11009|=(% style="width: 336px;" %)(((
979 -* =2 TCP
980 -* =3 UDP
1363 +|(% style="width:220px" %)HSW11009|(% style="width:336px" %)(((
1364 +~=2 TCP
1365 +
1366 +~=3 UDP
981 981  )))
982 982  |(% style="width:220px" %)HSW11010|(% style="width:336px" %)Reserved
983 983  |(% rowspan="7" style="width:40px" %)2|(% colspan="1" rowspan="7" style="width:295px" %)Ethernet parameter configuration for communication number 2 in list. Configure those addresses according to connected device. After configuration, wait for 5 seconds and restart the HMI.|(% style="width:220px" %)HSW11011|(% style="width:336px" %)Device IP address high word 1
... ... @@ -985,9 +985,10 @@
985 985  |(% style="width:220px" %)HSW11013|(% style="width:336px" %)Device IP address high word 3
986 986  |(% style="width:220px" %)HSW11014|(% style="width:336px" %)Device IP address high word 4
987 987  |(% style="width:220px" %)HSW11015|(% style="width:336px" %)Device Port number
988 -|(% style="width:220px" %)HSW11016|=(% style="width: 336px;" %)(((
989 -* =2 TCP
990 -* =3 UDP
1374 +|(% style="width:220px" %)HSW11016|(% style="width:336px" %)(((
1375 +~=2 TCP
1376 +
1377 +~=3 UDP
991 991  )))
992 992  |(% style="width:220px" %)HSW11017|(% style="width:336px" %)Reserved
993 993  |(% style="width:40px" %)…|(% style="width:295px" %) |(% style="width:220px" %)…|(% style="width:336px" %)…
... ... @@ -996,16 +996,22 @@
996 996  |(% style="width:220px" %)HSW11223|(% style="width:336px" %)Device IP address high word 3
997 997  |(% style="width:220px" %)HSW11224|(% style="width:336px" %)Device IP address high word 4
998 998  |(% style="width:220px" %)HSW11225|(% style="width:336px" %)Device Port number
999 -|(% style="width:220px" %)HSW11226|=(% style="width: 336px;" %)2 TCP; =3 UDP
1386 +|(% style="width:220px" %)HSW11226|(% style="width:336px" %)(((
1387 +~=2 TCP;
1388 +
1389 +~=3 UDP
1390 +)))
1000 1000  |(% style="width:220px" %)HSW11227|(% style="width:336px" %)Reserved
1001 1001  
1002 -(% class="wikigeneratedid" %)
1393 +(% class="box infomessage" %)
1394 +(((
1003 1003  **✎Note:** The number of Ethernet connections supported by different HMI series varies.
1396 +)))
1004 1004  
1005 -== **Communication control** ==
1398 +== Communication control ==
1006 1006  
1007 1007  (% class="table-bordered" %)
1008 -|(% style="width:135px" %)**Communication No.**|(% style="width:102px" %)**Station No.**|(% style="width:185px" %)**Control bit**|(% style="width:191px" %)**Communication lamp**|(% style="width:271px" %)**Description**
1401 +|=(% style="width: 135px;" %)**Communication No.**|=(% style="width: 102px;" %)**Station No.**|=(% style="width: 185px;" %)**Control bit**|=(% style="width: 191px;" %)**Communication lamp**|=(% style="width: 271px;" %)**Description**
1009 1009  |(% colspan="1" rowspan="16" style="width:135px" %)1|(% style="width:102px" %)0~~15|(% style="width:185px" %)HSX550.0～HSX550.15|(% style="width:191px" %)HSX558.0～HSX558.15|(% rowspan="160" style="width:271px" %)Communication number refers to the number in "Communication Port Configuration". A number provides 256 device station numbers. Each station number corresponds to a communication control bit and a communication indicator bit. Registers HSX550.0 to HSX805.15 are used to control the station numbers from 0 to 127, and registers HSX1150.0 to HSX1405.15 are used to control station numbers 128 to 255.
1010 1010  |(% style="width:102px" %)16~~31|(% style="width:185px" %)HSX551.0～HSX551.15|(% style="width:191px" %)HSX559.0～HSX559.15
1011 1011  |(% style="width:102px" %)32~~47|(% style="width:185px" %)HSX552.0～HSX552.15|(% style="width:191px" %)HSX560.0～HSX560.15