Changes for page 13 HMI Internal Registers

Summary

• Page properties (4 modified, 0 added, 0 removed)
• Attachments (0 modified, 1 added, 0 removed)
  • 6.png

Details

Page properties

Title

...	...	@@ -1,1 +1,1 @@
1		-12 HMI internal registers
	1	+13.HMI Internal Registers

Parent

...	...	@@ -1,1 +1,1 @@
1		-PIStudio.1 User Manual.WebHome
	1	+PIStudio.WebHome

Author

...	...	@@ -1,1 +1,1 @@
1		-XWiki.Hunter
	1	+XWiki.Mora

Content

...	...	@@ -4,28 +4,32 @@
4	4
5	5	*HSW, HDW, HUW, HAW are word address, HSX, HDX, HUX, HAX are bit address.
6	6
7		-1. **System data area (HSW): **A special register defined by the system.
8		-1. **Data storage area (HDW/HDX): **Users store user data.
9		-1. **System data area (HUW): **A special register defined by the system.
10		-1. **System Data (HAW)**: System register used for power-off save.
11		-1. **Recipe index area (RPW): **System register used for recipe index.
	7	+* **System data area (HSW): **A special register defined by the system.
	8	+* **Data storage area (HDW/HDX): **Users store user data.
	9	+* **System data area (HUW): **A special register defined by the system.
	10	+* **System Data (HAW)**: System register used for power-off save.
	11	+* **Recipe index area (RPW): **System register used for recipe index.
12	12
13	13	HMI internal registers are divided into bit address and word address, which can be accessed in two ways (take HDW as an example).
14	14
15		-1. Access as word with the prefix "HDW".
	15	+* Access as word with the prefix "HDW".
	16	+** HDW0 means the 1st word of system data area. HDW1 means the 2nd word of system data area.
	17	+* Access as bit with the prefix "HDX".  The number before "." i".  The number before Access in bit with the prefix "HD".  The number before Access in bit with the prefix "HDX". The number before "." indicates the number of the word. The number after "." indicates the bit number of the word.
	18	+** HDX1020.12 means to access the system data area in bit mode, the specific location is the 13th bit of the 1020 word.
16	16
17		-* HDW0 means the 1st word of system data area. HDW1 means the 2nd word of system data area.
18		-
19		-(% start="2" %)
20		-1. Access as bit with the prefix "HDX".  The number before "." i".  The number before Access in bit with the prefix "HD".  The number before Access in bit with the prefix "HDX". The number before "." indicates the number of the word. The number after "." indicates the bit number of the word.
21		-
22		-* HDX1020.12 means to access the system data area in bit mode, the specific location is the 13th bit of the 1020 word.
23		-
	20	+(% class="box infomessage" %)
	21	+(((
24	24	**✎Note:**
25	25
26	26	* Addresses in HDX are the bits from words in HDW, so be careful when using addresses. For example, HDX1020.12 is the 13th bit to access the 1020 word. The value of this bit is the same as that of the word accessed through HDW001020. The 13th bit of this word is actually the same bit as HDX1020.12.
27	27	* The address of the bit address HDX is with a decimal point while word addresses are integers.
	26	+)))
28	28
	28	+= Address ranges table =
	29	+
	30	+(% style="text-align:center" %)
	31	+[[image:6.png]]
	32	+
29	29	= **Data storage area (HDW/HDX)** =
30	30
31	31	It is used to save the temporary data of project.
...	...	@@ -40,10 +40,13 @@
40	40	1. Access as word, and serial number range is from HAW0 to HAW199999.
41	41	1. Access as bit, and serial number range is from HAX0.0 to HAX199999.15.
42	42
	47	+(% class="box infomessage" %)
	48	+(((
43	43	**✎Note:**
44	44
45	45	* HAW/HAX is power-down retention. The register of this type is able to save the data before the power-down.
46	46	* To avoid possible device failure, do not immediately power off and reboot when configuring the power-down save addre
	53	+)))
47	47
48	48	= **Recipe index area (RPW)** =
49	49
...	...	@@ -58,8 +58,8 @@
58	58
59	59	It is used for system special registers (reserved by system).
60	60
61		-1. Access as word, and serial number range is from HUW0 to HUW199999.
62		-1. Access as bit, and serial number range is from HUX0.0 to HUX199999.15.
	68	+1. Access as word, and serial number range is from HUW0 to HUW1599.
	69	+1. Access as bit, and serial number range is from HUX0.0 to HUX1599.15.
63	63
64	64	**✎Note:**
65	65
...	...	@@ -133,8 +133,8 @@
133	133	(% class="table-bordered" style="width:1024px" %)
134	134	|=(% scope="row" style="width: 160px;" %)**Address**|=(% style="width: 282px;" %)**Function**|=(% style="width: 452px;" %)**Description**
135	135	|=(% style="width: 160px;" %)HSW0|(% style="width:282px" %)Language switch|(% style="width:452px" %)Multiple language could be set in the project, HMI support maximum 8 languages. (Power-down save supported)
136		-|=(% style="width: 160px;" %)HSW1|(% style="width:282px" %)Beep frequency|(% style="width:452px" %)Frequency range: 0~~4000
137		-|=(% style="width: 160px;" %)HSW2|(% style="width:282px" %)Beep volume|(% style="width:452px" %)Volume range: 0~~80
	143	+|=(% style="width: 160px;" %)HSW1|(% style="width:282px" %)Beep frequency (Only valid in HMI V1.0 System)|(% style="width:452px" %)Frequency range: 0~~4000
	144	+|=(% style="width: 160px;" %)HSW2|(% style="width:282px" %)Beep volume (Only valid in HMI V1.0 System)|(% style="width:452px" %)Volume range: 0~~80
138	138	|=(% style="width: 160px;" %)HSW3|(% style="width:282px" %)Beep time|(% style="width:452px" %)Unit: ms
139	139	|=(% style="width: 160px;" %)HSW4|(% style="width:282px" %)Beep whether enable or not|(% style="width:452px" %)(((
140	140	* =0: Enable.
...	...	@@ -148,7 +148,7 @@
148	148	)))
149	149	|=(% style="width: 160px;" %)HSW6~~HSW7|(% style="width:282px" %)Number of alarms|(% style="width:452px" %)The number of alarm (it also includes the records of alarm confirmed)
150	150	|=(% style="width: 160px;" %)HSW8|(% style="width:282px" %)Number of unconfirmed history alarm|(% style="width:452px" %)The number of unconfirmed history alarm
151		-|=(% style="width: 160px;" %)HSW9|(% style="width:282px" %)Time out tip|(% style="width:452px" %)(((
	158	+|=(% style="width: 160px;" %)HSW9|(% style="width:282px" %)Time out prompt|(% style="width:452px" %)(((
152	152	* =0: Enable
153	153	* =1: Disable
154	154	)))
...	...	@@ -173,6 +173,7 @@
173	173	* =5: Friday.
174	174	* =6: Saturday.
175	175	)))
	183	+|=(% style="width: 160px;" %)HSW39|(% style="width:282px" %)Beep type(Only valid in HMI V2.0 System)|(% style="width:452px" %)Type range: 1-5, Default is 1.
176	176	|=(% style="width: 160px;" %)HSW134|(% style="width:282px" %)(((
177	177	Whether the Script is read through
178	178
...	...	@@ -239,8 +239,8 @@
239	239	* =2: HSX521.1=1, delete all trend graph.
240	240	* =4: HSX521.2=1, delete all alarms.
241	241	* =16: HSX521.4=1, delete history XY plot.
242		-* =32: HSX521.5=1, delete data records in SD card or flash dish;(Please make a setting which is saved to flash disk or SD card in project setting).
243		-* =64: HSX521.6=1, delete alarms records in SD card or flash dish; (Please make a setting which is saved to flash disk or SD card in project setting).
	250	+* =32: HSX521.5=1, delete data records in SD card or USB flash disk;(Please make a setting which is saved to USB flash disk or SD card in project setting).
	251	+* =64: HSX521.6=1, delete alarms records in SD card or USB flash disk; (Please make a setting which is saved to USB flash disk or SD card in project setting).
244	244	)))
245	245	|=(% style="width: 160px;" %)HSW522|(% style="width:282px" %)Copy and paste the alarm/data files in flash to the USB flash disk|(% style="width:452px" %)(((
246	246	* =0: No operation
...	...	@@ -337,9 +337,11 @@
337	337	* HDX882.1=0 SD card doesn't execute storage or storage finished.
338	338	* HDX882.1=1 SD card is reading data, don't remove SD card.
339	339	)))
340		-|=(% style="width: 160px;" %)HSW884|(% style="width:282px" %)Enter setup screen|(% style="width:452px" %)(((
341		-* = 0: Do not into setup screen
342		-* = 1: Enter setup screen
	348	+|=(% style="width: 160px;" %)HSW884|(% style="width:282px" %)Enter the system network configuration interface|(% style="width:452px" %)(((
	349	+* =0: Do not enter the network configuration interface
	350	+* =1: Enter the system network configuration interface.
	351	+** ig series HMI only supports to enter the system interface
	352	+
343	343	)))
344	344	|=(% style="width: 160px;" %)HSW885|(% style="width:282px" %)When the control object hides the address is read failed (communication failure), set the display mode of the object|(% style="width:452px" %)(((
345	345	* = 0: displayed by object setting.
...	...	@@ -446,7 +446,7 @@
446	446	Address mapping polling cycle, effective range: 40~~1000ms, default: 300ms.
447	447
448	448	* When the set value is greater than 1000, the value is 1000.
449		-* When the set value is greater than 1000, it changes to the default value 300
	459	+* When the set value is lower than 40, it changes to the default value 300
450	450	)))
451	451	|=(% style="width: 160px;" %)HSW1087|(% style="width:282px" %)Control write interval in address mapping|(% style="width:452px" %)(((
452	452	After reading data to the device for N times, Perform an address mapping write operation. N is the interval value. The effective range: 0~~5, and default is 2.
...	...	@@ -481,6 +481,8 @@
481	481	* =0, Default value
482	482	* =1, Release the alarm generated before the last power-down when starting up
483	483	)))
	494	+|=(% style="width: 160px;" %)HSW1200|(% colspan="1" rowspan="2" style="width:282px" %)TSAP settings for HMI in the Siemens LOGO! 8 protocol(ig series or HMI V2.0)|(% style="width:452px" %)HMI local TSAP, which corresponds to the remote TSAP of PLC
	495	+|=(% style="width: 160px;" %)HSW1201|(% style="width:452px" %)HMI remote TSAP, which corresponds to the local TSAP of PLC
484	484	|=(% style="width: 160px;" %)HSW1450|(% style="width:282px" %)Enable objects level password function|(% style="width:452px" %)(((
485	485	* =0, Disable
486	486	* =1, Enable
...	...	@@ -508,6 +508,10 @@
508	508	* HSX1502.0=1: Modification comfirmed. Save the data of HSW1450~~HSW1501 to a file for immediate effect.
509	509	* HSX1502.1=1:Modification cancelled. Restore the current data of hSW1450-HSW1501 to the data saved in the file last time.
510	510	)))
	523	+|=(% style="width: 160px;" %)HSW1509|(% style="width:282px" %)Curve width|(% style="width:452px" %)(((
	524	+* =0: Use the curve width set by project default.
	525	+* =1 to 10: use special register to set curve width.
	526	+)))
511	511	|=(% style="width: 160px;" %)HSW1603|(% style="width:282px" %)Number of current unreleased alarms|(% style="width:452px" %)The number of current unreleased alarms in alarm record file.
512	512	|=(% style="width: 160px;" %)HSW1604|(% style="width:282px" %)The auxiliary judgment address when the control bit in the Object Lock fails to be read|(% style="width:452px" %)(((
513	513	* =0: The auxiliary address is invalid.
...	...	@@ -583,6 +583,9 @@
583	583	* =0: Server connection exception
584	584	* =1: Server connection is OK
585	585	)))
	602	+|=(% style="width: 160px;" %)HSW1740|(% style="width:282px" %)Wi-fi signal strength|(% style="width:452px" %)(((
	603	+Display the value of Wi-fi signal signal strength, ranges from 0~~100 (Signal strength is automatically obtained only once when HMI is powered on, and it will not be automatically updated. It needs to be used with the HSW1890)
	604	+)))
586	586	|=(% style="width: 160px;" %)HSW1741|(% colspan="1" rowspan="12" style="width:282px" %)Related IP register in 4Gnetwork status (It is valid when HMI is connected to 4G)|(% style="width:452px" %)Local IP address high byte 1
587	587	|=(% style="width: 160px;" %)HSW1742|(% style="width:452px" %)Local IP address high byte 2
588	588	|=(% style="width: 160px;" %)HSW1743|(% style="width:452px" %)Local IP address high byte 3
...	...	@@ -610,10 +610,180 @@
610	610	* =1: Server connection is OK
611	611	)))
612	612	|=(% style="width: 160px;" %)HSW1761|(% style="width:282px" %)Display 4G network signal strength|(% style="width:452px" %)Signal strength: 0~~31. The greater the value ,the signal is stronger
	632	+|=(% style="width: 160px;" %)(((
	633	+HSW1762
	634	+)))|(% colspan="1" rowspan="13" style="width:282px" %)(((
	635	+Note: Valid when Ethernet2 of HMI is plugged into the network cable.
	636	+①、When the Ethernet setting is enabled in the project parameters, this register displays the set value.
	637	+②. When the Ethernet setting is not enabled in the engineering parameters, the register displays the Ethernet IP automatically acquired by the HMI.
	638	+③. When the HMI is not plugged into the network cable, the register will show 0 whether the engineering parameters are set or not.
	639	+④.IP related registers can be read and written (only static IP mode can be written).
	640	+)))|(% style="width:452px" %)(((
	641	+Ethernet2 Local IP address high byte 1
	642	+)))
	643	+|=(% style="width: 160px;" %)(((
	644	+HSW1763
	645	+)))|(% style="width:452px" %)(((
	646	+Ethernet2 Local IP address high byte 2
	647	+)))
	648	+|=(% style="width: 160px;" %)(((
	649	+HSW1764
	650	+)))|(% style="width:452px" %)(((
	651	+Ethernet2 Local IP address high byte 3
	652	+)))
	653	+|=(% style="width: 160px;" %)(((
	654	+HSW1765
	655	+)))|(% style="width:452px" %)(((
	656	+Ethernet2 Local IP address high byte 4
	657	+)))
	658	+|=(% style="width: 160px;" %)(((
	659	+HSW1766
	660	+)))|(% style="width:452px" %)(((
	661	+Ethernet2 Local mask IP address high byte 1
	662	+)))
	663	+|=(% style="width: 160px;" %)(((
	664	+HSW1767
	665	+)))|(% style="width:452px" %)(((
	666	+Ethernet2 Local mask IP address high byte 2
	667	+)))
	668	+|=(% style="width: 160px;" %)(((
	669	+HSW1768
	670	+)))|(% style="width:452px" %)Ethernet2 Local mask IP address high byte 3
	671	+|=(% style="width: 160px;" %)HSW1769|(% style="width:452px" %)Ethernet2 Local mask IP address high byte 4
	672	+|=(% style="width: 160px;" %)(((
	673	+HSW1770
	674	+)))|(% style="width:452px" %)(((
	675	+Ethernet2 Local gateway IP address high byte 1
	676	+)))
	677	+|=(% style="width: 160px;" %)(((
	678	+HSW1771
	679	+)))|(% style="width:452px" %)(((
	680	+Ethernet2 Local gateway IP address high byte 2
	681	+)))
	682	+|=(% style="width: 160px;" %)(((
	683	+HSW1772
	684	+)))|(% style="width:452px" %)(((
	685	+Ethernet2 Local gateway IP address high byte 3
	686	+)))
	687	+|=(% style="width: 160px;" %)(((
	688	+HSW1773
	689	+)))|(% style="width:452px" %)(((
	690	+Ethernet2 Local gateway IP address high byte 4
	691	+)))
	692	+|=(% style="width: 160px;" %)(((
	693	+HSW1774
	694	+)))|(% style="width:452px" %)(((
	695	+Ethernet2 Local Port Address
	696	+)))
	697	+|=(% style="width: 160px;" %)(((
	698	+HSW1775
	699	+)))|(% colspan="1" rowspan="6" style="width:282px" %)(((
	700	+①Display the MAC code of Ethernet2 NIC
	701	+
	702	+(hexadecimal display)
	703	+
	704	+②Read-only mode, not modifiable
	705	+)))|(% style="width:452px" %)(((
	706	+Ethernet2 Local MAC code high byte 1
	707	+)))
	708	+|=(% style="width: 160px;" %)(((
	709	+HSW1776
	710	+)))|(% style="width:452px" %)(((
	711	+Ethernet2 Local MAC code high byte 2
	712	+)))
	713	+|=(% style="width: 160px;" %)(((
	714	+HSW1777
	715	+)))|(% style="width:452px" %)(((
	716	+Ethernet2 Local MAC code high byte 3
	717	+)))
	718	+|=(% style="width: 160px;" %)(((
	719	+HSW1778
	720	+)))|(% style="width:452px" %)(((
	721	+Ethernet2 Local MAC code high byte 4
	722	+)))
	723	+|=(% style="width: 160px;" %)(((
	724	+HSW1779
	725	+)))|(% style="width:452px" %)(((
	726	+Ethernet2 Local MAC code high byte 5
	727	+)))
	728	+|=(% style="width: 160px;" %)(((
	729	+HSW1780
	730	+)))|(% style="width:452px" %)(((
	731	+Ethernet2 Local MAC code high byte 6
	732	+)))
	733	+|=(% style="width: 160px;" %)(((
	734	+HSW1781
	735	+)))|(% colspan="1" rowspan="8" style="width:282px" %)(((
	736	+①Display and modify DNS1 and DNS2 of Ethernet2
	737	+
	738	+②Related registers can be read and written mode (only static IP mode can be written)
	739	+)))|(% style="width:452px" %)(((
	740	+Ethernet2 Local DNS1 address high byte 1
	741	+)))
	742	+|=(% style="width: 160px;" %)(((
	743	+HSW1782
	744	+)))|(% style="width:452px" %)(((
	745	+Ethernet2 Local DNS1 address high byte 2
	746	+)))
	747	+|=(% style="width: 160px;" %)(((
	748	+HSW1783
	749	+)))|(% style="width:452px" %)(((
	750	+Ethernet2 Local DNS1 address high byte 3
	751	+)))
	752	+|=(% style="width: 160px;" %)(((
	753	+HSW1784
	754	+)))|(% style="width:452px" %)(((
	755	+Ethernet2 Local DNS1 address high byte 4
	756	+)))
	757	+|=(% style="width: 160px;" %)(((
	758	+HSW1785
	759	+)))|(% style="width:452px" %)(((
	760	+Ethernet2 Local DNS2 address high byte 1
	761	+)))
	762	+|=(% style="width: 160px;" %)(((
	763	+HSW1786
	764	+)))|(% style="width:452px" %)(((
	765	+Ethernet2 Local DNS2 address high byte 2
	766	+)))
	767	+|=(% style="width: 160px;" %)(((
	768	+HSW1787
	769	+)))|(% style="width:452px" %)(((
	770	+Ethernet2 Local DNS2 address high byte 3
	771	+)))
	772	+|=(% style="width: 160px;" %)(((
	773	+HSW1788
	774	+)))|(% style="width:452px" %)(((
	775	+Ethernet2 Local DNS2 address high byte 4
	776	+)))
	777	+|=(% style="width: 160px;" %)(((
	778	+HSW1789
	779	+)))|(% colspan="1" style="width:282px" %)(((
	780	+Display or set the dynamic or static IP mode of Ethernet2
	781	+)))|(% style="width:452px" %)(((
	782	+HSX1789.0 = 0, Static IP mode
	783	+
	784	+HSX1789.0 = 1, dynamic IP mode
	785	+)))
	786	+|=(% style="width: 160px;" %)(((
	787	+HSW1790
	788	+)))|(% colspan="1" style="width:282px" %)(((
	789	+Confirm Ethernet2 IP, subnet mask, gateway, DNS1, DNS2, and dynamic static IP settings
	790	+)))|(% style="width:452px" %)(((
	791	+~= 1, confirm the setting (i.e., after modifying IP-related information, set this address to 1, representing confirmation of the modification, after which it will be reset to 0)
	792	+)))
	793	+|=(% style="width: 160px;" %)(((
	794	+HSW1791
	795	+)))|(% colspan="1" style="width:282px" %)(((
	796	+Network status of the Ethernet2 connection server
	797	+)))|(% style="width:452px" %)(((
	798	+~= 0, connection to the server is abnormal = 1, connection to the server is normal
	799	+)))
613	613	|=(% style="width: 160px;" %)HSW1852|(% style="width:282px" %)Control the interval in two consecutive clicks|(% style="width:452px" %)Limit range: 1~~500ms. The default is 100 ms.
614	614	|=(% style="width: 160px;" %)HSW1853|(% style="width:282px" %)File format for exporting data records to USB flash drive or SD card|(% style="width:452px" %)(((
615	615	* =0: db database
616	616	* =1: CSV
	804	+
	805	+(Only valid for script function DbToCsvFile)
617	617	)))
618	618	|=(% style="width: 160px;" %)HSW1854|(% style="width:282px" %)High and low word conversion type|(% style="width:452px" %)(((
619	619	* =0: use the old high-low word conversion (default)
...	...	@@ -635,14 +635,96 @@
635	635	* =1: download firmware
636	636	* =2: enter the background
637	637	)))
	827	+|=(% style="width: 160px;" %)HSW1865|(% style="width:282px" %)Priority connection to the cloud|(% style="width:452px" %)(((
	828	+* =0: priority Ethernet
	829	+* =1: priority WLAN
	830	+* =2: priority 4G
	831	+)))
	832	+|=(% style="width: 160px;" %)HSW1866|(% style="width:282px" %)Delete the Lua extension module file|(% style="width:452px" %)(((
	833	+* =0: delete;
	834	+* = Others: do not delete
	835	+)))
	836	+|=(% style="width: 160px;" %)HSW1867|(% style="width:282px" %)Reset mode|(% style="width:452px" %)(((
	837	+Monitor address is set during reset of reset switch, whether to cancel reset,
	838	+
	839	+* = 0: yes (default);
	840	+* = 1: no
	841	+)))
	842	+|=(% style="width: 160px;" %)HSW1868|(% style="width:282px" %)Double-click or long press the record type table mode|(% style="width:452px" %)(((
	843	+Controls whether the button pops up when double-clicking or long pressing on record type table object
	844	+
	845	+* = 0: yes (default);
	846	+* = 1: no
	847	+)))
	848	+|=(% style="width: 160px;" %)(((
	849	+HSW1869
	850	+)))|(% style="width:282px" %)(((
	851	+Dynamic screensaver countdown
	852	+)))|(% style="width:452px" %)(((
	853	+Countdown to enter dynamic screensaver effect, unit (S)
	854	+)))
	855	+|=(% style="width: 160px;" %)(((
	856	+HSW1870
	857	+)))|(% style="width:282px" %)(((
	858	+Display or set the dynamic or static IP mode of Ethernet1
	859	+)))|(% style="width:452px" %)(((
	860	+HSX1870.0 = 0, Static IP mode
	861	+
	862	+HSX1870.0 = 1, dynamic IP mode
	863	+)))
	864	+|=(% style="width: 160px;" %)(((
	865	+HSW1871
	866	+)))|(% style="width:282px" %)(((
	867	+Confirm the IP, subnet mask, gateway, DNS1, DNS2, and dynamic static IP settings for Ethernet1
	868	+)))|(% style="width:452px" %)(((
	869	+~= 1, confirm the setting (i.e., after modifying IP-related information, set this address to 1, representing confirmation of the modification, after which it will be reset to 0)
	870	+)))
	871	+|=(% style="width: 160px;" %)(((
	872	+HSW1872
	873	+)))|(% colspan="1" rowspan="8" style="width:282px" %)(((
	874	+①Display and modify DNS1 and DNS2 of Ethernet1
	875	+
	876	+②Related registers can be read and written mode (only static IP mode can be written)
	877	+)))|(% style="width:452px" %)(((
	878	+Ethernet1 Local DNS1 address high byte 1
	879	+)))
	880	+|=(% style="width: 160px;" %)(((
	881	+HSW1873
	882	+)))|(% style="width:452px" %)Ethernet1 Local DNS1 address high byte 2
	883	+|=(% style="width: 160px;" %)(((
	884	+HSW1874
	885	+)))|(% style="width:452px" %)Ethernet1 Local DNS1 address high byte 3
	886	+|=(% style="width: 160px;" %)(((
	887	+HSW1875
	888	+)))|(% style="width:452px" %)Ethernet1 Local DNS1 address high byte 4
	889	+|=(% style="width: 160px;" %)(((
	890	+HSW1876
	891	+)))|(% style="width:452px" %)Ethernet1 Local DNS2 address high byte 1
	892	+|=(% style="width: 160px;" %)(((
	893	+HSW1877
	894	+)))|(% style="width:452px" %)Ethernet1 Local DNS2 address high byte 2
	895	+|=(% style="width: 160px;" %)(((
	896	+HSW1878
	897	+)))|(% style="width:452px" %)Ethernet1 Local DNS2 address high byte 3
	898	+|=(% style="width: 160px;" %)(((
	899	+HSW1879
	900	+)))|(% style="width:452px" %)Ethernet1 Local DNS2 address high byte 4
	901	+|=(% style="width: 160px;" %)HSW1890|(% colspan="1" style="width:282px" %)Enable refresh current network signal|(% style="width:452px" %)(((
	902	+* =1: Refresh the network signal once after triggered (This register will be automatically reset after triggered, only update the signal value once after per 15 seconds, not able to update twice in the short interval)
	903	+* =Others: not refresh
	904	+)))
	905	+|=(% style="width: 160px;" %)HSW1891|(% colspan="1" style="width:282px" %)Enable clear cache for screen data  |(% style="width:452px" %)(((
	906	+* =1, not clear screen cache when switch language
	907	+* =2, trigger clear cache of all screens for once time
	908	+* =3, always clear cache of all screen data
	909	+)))
638	638	|=(% style="width: 160px;" %)HSW10000~~19999|(% style="width:282px" %)Power-down storage area|(% style="width:452px" %)After restart, the data remains
639	639	|=(% style="width: 160px;" %)HSW10035|(% rowspan="13" style="width:282px" %)(((
640		-**✎Note: **Only valid when the HMI is plugged into the Ethernet cable.
641		-
642		-1. If Ethernet settings is enabled in project parameters, this register displays the set value.
643		-1. If Ethernet settings is not enabled in project parameters, IP would automatically obtained IP.
644		-1. If HMI is not connected to the network, the register is displayed as 0 whether the engineering parameters are set.
645		-1. 4. All IP registers of HMI are read-only.
	912	+Note: Valid when Ethernet1 of HMI is plugged into the network cable.
	913	+① When the Ethernet setting is enabled in the project parameters, this register displays the set value.
	914	+② When the Ethernet setting is not enabled in the engineering parameters, the register displays the Ethernet IP automatically acquired by the HMI.
	915	+③ When the HMI is not plugged into the network cable, the register will show 0 whether the engineering parameters are set or not.
	916	+④ IP related registers can be read and written (only static IP mode can be written).
646	646	)))|(% style="width:452px" %)Local IP address high byte 1
647	647	|=(% style="width: 160px;" %)HSW10036|(% style="width:452px" %)Local IP address high byte 2
648	648	|=(% style="width: 160px;" %)HSW10037|(% style="width:452px" %)Local IP address high byte 3
...	...	@@ -657,9 +657,11 @@
657	657	|=(% style="width: 160px;" %)HSW10046|(% style="width:452px" %)Local gateway address high byte 4
658	658	|=(% style="width: 160px;" %)HSW10047|(% style="width:452px" %)Local port address
659	659	|=(% style="width: 160px;" %)HSW10048|(% rowspan="6" style="width:282px" %)(((
660		-Displays the MAC code of the current network card
	931	+①Display the MAC code of Ethernet1 NIC
661	661
662		-(Hexadecimal display)
	933	+(hexadecimal display)
	934	+
	935	+②Read-only mode, not modifiable
663	663	)))|(% style="width:452px" %)Local MAC code high word 1
664	664	|=(% style="width: 160px;" %)HSW10049|(% style="width:452px" %)Local MAC code high word 2
665	665	|=(% style="width: 160px;" %)HSW10050|(% style="width:452px" %)Local MAC code high word 3
...	...	@@ -666,7 +666,7 @@
666	666	|=(% style="width: 160px;" %)HSW10051|(% style="width:452px" %)Local MAC code high word 4
667	667	|=(% style="width: 160px;" %)HSW10052|(% style="width:452px" %)Local MAC code high word 5
668	668	|=(% style="width: 160px;" %)HSW10053|(% style="width:452px" %)Local MAC code high word 6
669		-|=(% style="width: 160px;" %)HSW10118|(% colspan="1" rowspan="2" style="width:282px" %)TSAP settings for HMI in the Siemens logo! 8 protocol|(% style="width:452px" %)HMI local TSAP, which corresponds to the remote TSAP of PLC
	942	+|=(% style="width: 160px;" %)HSW10118|(% colspan="1" rowspan="2" style="width:282px" %)TSAP settings for HMI in the Siemens LOGO! 8 protocol|(% style="width:452px" %)HMI local TSAP, which corresponds to the remote TSAP of PLC
670	670	|=(% style="width: 160px;" %)HSW10119|(% style="width:452px" %)HMI remote TSAP, which corresponds to the local TSAP of PLC
671	671	|=(% style="width: 160px;" %)HSW10461~~10493|(% style="width:282px" %)Remote access password|(% style="width:452px" %)8-character remote access password
672	672	|=(% style="width: 160px;" %)HSW10494~~10558|(% style="width:282px" %)Machine ID (Read only)|(% style="width:452px" %)Machine ID for remote access (read only 64-bit)
...	...	@@ -734,6 +734,7 @@
734	734	* =0: LAN or the external network both OK
735	735	* =1: Only LAN access
736	736	* =2: Only external network can access
	1010	+* =3: Close the functions
737	737	)))
738	738	|=(% style="width: 160px;" %)HSW11757|(% style="width:282px" %)Enable the valid date of the dynamic installment password|(% style="width:452px" %)(((
739	739	* =0: Disabled
...	...	@@ -748,11 +748,38 @@
748	748	)))
749	749	|=(% style="width: 160px;" %)HSW11760|(% style="width:282px" %)Screensaver countdown|(% style="width:452px" %)Display the countdown to enter the Screensaver, unit: second.
750	750	|=(% style="width: 160px;" %)HSW11761|(% style="width:282px" %)Screensaver screen number|(% style="width:452px" %)Set the screen number for Screensaver
	1025	+|=(% style="width: 160px;" %)(((
	1026	+HSW11762
	1027	+)))|(% style="width:282px" %)(((
	1028	+Dynamic screensaver control address
	1029	+)))|(% style="width:452px" %)(((
	1030	+HSX11762.0=0, initialize with project configuration;
751	751
752		-== **Serial port communication configuration** ==
	1032	+HSX11762.0=1, initialize with special register configuration;
753	753
	1034	+HSX11762.1=0, disable dynamic screensaver;
	1035	+
	1036	+HSX11762.1=1, enable dynamic screensaver
	1037	+)))
	1038	+|=(% style="width: 160px;" %)(((
	1039	+HSW11763
	1040	+)))|(% style="width:282px" %)(((
	1041	+Waiting time to enter the dynamic screensaver
	1042	+)))|(% style="width:452px" %)(((
	1043	+Waiting time when the screen is not operated, range 1~~720 minutes
	1044	+)))
	1045	+|=(% style="width: 160px;" %)(((
	1046	+HSW11764
	1047	+)))|(% style="width:282px" %)(((
	1048	+Animated screensaver animation type
	1049	+)))|(% style="width:452px" %)(((
	1050	+~=0: Raster,=1: Blinds,=2: Bubble
	1051	+)))
	1052	+
	1053	+== Serial port communication configuration ==
	1054	+
754	754	(% class="table-bordered" %)
755		-|=(% style="width: 102px;" %)Port|=(% style="width: 173px;" %)**Function**|=(% style="width: 122px;" %)**Address**|=(% colspan="2" style="width: 506px;" %)**Description**
	1056	+|=(% scope="row" style="width: 102px;" %)Port|=(% style="width: 173px;" %)**Function**|=(% style="width: 122px;" %)**Address**|=(% colspan="2" style="width: 506px;" %)**Description**
756	756	|(% colspan="1" rowspan="11" style="width:102px" %)COM1|(% style="width:173px" %)Communication mode|(% style="width:122px" %)HSW10061|(% colspan="2" style="width:506px" %)(((
757	757	* =0: RS232
758	758	* =1: RS485
...	...	@@ -782,10 +782,22 @@
782	782	* =1: ODD
783	783	* =2: EVEN
784	784	)))
785		-|(% style="width:173px" %)Wait timeout|(% style="width:122px" %)HSW10066|(% colspan="2" style="width:506px" %)Unit: ms. Range: 0~~30000
786		-|(% style="width:173px" %)reveive timeout|(% style="width:122px" %)HSW10067|(% colspan="2" style="width:506px" %)Unit: ms. Range: 0~~30000
787		-|(% style="width:173px" %)Retry time|(% style="width:122px" %)HSW10068|(% colspan="2" style="width:506px" %)Unit: times. Range: 0~~100
788		-|(% style="width:173px" %)Retry timeout|(% style="width:122px" %)HSW10069|(% colspan="2" style="width:506px" %)Unit: s. Range: 0~~300
	1086	+|(% style="width:173px" %)Wait timeout|(% style="width:122px" %)HSW10066|(% colspan="2" style="width:506px" %)(((
	1087	+* Unit: ms.
	1088	+* Range: 0 to 30000
	1089	+)))
	1090	+|(% style="width:173px" %)reveive timeout|(% style="width:122px" %)HSW10067|(% colspan="2" style="width:506px" %)(((
	1091	+* Unit: ms.
	1092	+* Range: 0 to 30000
	1093	+)))
	1094	+|(% style="width:173px" %)Retry time|(% style="width:122px" %)HSW10068|(% colspan="2" style="width:506px" %)(((
	1095	+* Unit: times.
	1096	+* Range: 0 to 100
	1097	+)))
	1098	+|(% style="width:173px" %)Retry timeout|(% style="width:122px" %)HSW10069|(% colspan="2" style="width:506px" %)(((
	1099	+* Unit: s.
	1100	+* Range: 0 to 300
	1101	+)))
789	789	|(% style="width:173px" %)HMI station number|(% style="width:122px" %)HSW10070|(% colspan="2" style="width:506px" %)
790	790	|(% style="width:173px" %)PLC station number|(% style="width:122px" %)HSW10071|(% colspan="2" style="width:506px" %)
791	791	|(% colspan="1" rowspan="11" style="width:102px" %)COM1-2|(% style="width:173px" %)Communication mode|(% style="width:122px" %)HSW10094|(% colspan="2" style="width:506px" %)(((
...	...	@@ -818,10 +818,22 @@
818	818	* =1: ODD
819	819	* =2: EVEN
820	820	)))
821		-|(% style="width:173px" %)Wait timeout|(% style="width:122px" %)HSW10099|(% colspan="2" style="width:506px" %)Unit: ms. Range: 0~~30000
822		-|(% style="width:173px" %)receive timeout|(% style="width:122px" %)HSW10100|(% colspan="2" style="width:506px" %)Unit: ms. Range: 0~~30000
823		-|(% style="width:173px" %)Retry time|(% style="width:122px" %)HSW10101|(% colspan="2" style="width:506px" %)Unit: times. Range: 0~~100
824		-|(% style="width:173px" %)Retry timeout|(% style="width:122px" %)HSW10102|(% colspan="2" style="width:506px" %)Unit: s. Range: 0~~30
	1134	+|(% style="width:173px" %)Wait timeout|(% style="width:122px" %)HSW10099|(% colspan="2" style="width:506px" %)(((
	1135	+* Unit: ms.
	1136	+* Range: 0 to 30000
	1137	+)))
	1138	+|(% style="width:173px" %)receive timeout|(% style="width:122px" %)HSW10100|(% colspan="2" style="width:506px" %)(((
	1139	+* Unit: ms.
	1140	+* Range: 0 to 30000
	1141	+)))
	1142	+|(% style="width:173px" %)Retry time|(% style="width:122px" %)HSW10101|(% colspan="2" style="width:506px" %)(((
	1143	+* Unit: times.
	1144	+* Range: 0 to 100
	1145	+)))
	1146	+|(% style="width:173px" %)Retry timeout|(% style="width:122px" %)HSW10102|(% colspan="2" style="width:506px" %)(((
	1147	+* Unit: s.
	1148	+* Range: 0 to 30
	1149	+)))
825	825	|(% style="width:173px" %)HMI station number|(% style="width:122px" %)HSW10103|(% colspan="2" style="width:506px" %)
826	826	|(% style="width:173px" %)PLC station number|(% style="width:122px" %)HSW10104|(% colspan="2" style="width:506px" %)
827	827	|(% colspan="1" rowspan="11" style="width:102px" %)COM1-3|(% style="width:173px" %)Communication mode|(% style="width:122px" %)HSW10120|(% colspan="2" style="width:506px" %)(((
...	...	@@ -854,10 +854,22 @@
854	854	* =1: ODD
855	855	* =2: EVEN
856	856	)))
857		-|(% style="width:173px" %)Wait timeout|(% style="width:122px" %)HSW10125|(% colspan="2" style="width:506px" %)Unit: ms. Range: 0~~30000
858		-|(% style="width:173px" %)receive timeout|(% style="width:122px" %)HSW10126|(% colspan="2" style="width:506px" %)Unit: ms. Range: 0~~30000
859		-|(% style="width:173px" %)Retry time|(% style="width:122px" %)HSW10127|(% colspan="2" style="width:506px" %)Unit: times. Range: 0~~100
860		-|(% style="width:173px" %)Retry timeout|(% style="width:122px" %)HSW10128|(% colspan="2" style="width:506px" %)Unit: s. Range: 0~~30
	1182	+|(% style="width:173px" %)Wait timeout|(% style="width:122px" %)HSW10125|(% colspan="2" style="width:506px" %)(((
	1183	+* Unit: ms.
	1184	+* Range: 0 to 30000
	1185	+)))
	1186	+|(% style="width:173px" %)receive timeout|(% style="width:122px" %)HSW10126|(% colspan="2" style="width:506px" %)(((
	1187	+* Unit: ms.
	1188	+* Range: 0 to 30000
	1189	+)))
	1190	+|(% style="width:173px" %)Retry time|(% style="width:122px" %)HSW10127|(% colspan="2" style="width:506px" %)(((
	1191	+* Unit: times.
	1192	+* Range: 0 to 100
	1193	+)))
	1194	+|(% style="width:173px" %)Retry timeout|(% style="width:122px" %)HSW10128|(% colspan="2" style="width:506px" %)(((
	1195	+* Unit: s.
	1196	+* Range: 0 to 30
	1197	+)))
861	861	|(% style="width:173px" %)HMI station number|(% style="width:122px" %)HSW10129|(% colspan="2" style="width:506px" %)
862	862	|(% style="width:173px" %)PLC station number|(% style="width:122px" %)HSW10130|(% colspan="2" style="width:506px" %)
863	863	|(% colspan="1" rowspan="11" style="width:102px" %)COM2|(% style="width:173px" %)Communication mode|(% style="width:122px" %)HSW10072|(% colspan="2" style="width:506px" %)(((
...	...	@@ -888,10 +888,22 @@
888	888	* =1: ODD
889	889	* =2: EVEN
890	890	)))
891		-|(% style="width:173px" %)Wait timeout|(% style="width:122px" %)HSW10077|(% colspan="2" style="width:506px" %)Unit: ms. Range: 0~~30000
892		-|(% style="width:173px" %)receive timeout|(% style="width:122px" %)HSW10078|(% colspan="2" style="width:506px" %)Unit: ms. Range: 0~~30000
893		-|(% style="width:173px" %)Retry time|(% style="width:122px" %)HSW10079|(% colspan="2" style="width:506px" %)Unit: times. Range: 0~~100
894		-|(% style="width:173px" %)Retry timeout|(% style="width:122px" %)HSW10080|(% colspan="2" style="width:506px" %)Unit: s. Range: 0~~30
	1228	+|(% style="width:173px" %)Wait timeout|(% style="width:122px" %)HSW10077|(% colspan="2" style="width:506px" %)(((
	1229	+* Unit: ms.
	1230	+* Range: 0 to 30000
	1231	+)))
	1232	+|(% style="width:173px" %)receive timeout|(% style="width:122px" %)HSW10078|(% colspan="2" style="width:506px" %)(((
	1233	+* Unit: ms.
	1234	+* Range: 0 to 30000
	1235	+)))
	1236	+|(% style="width:173px" %)Retry time|(% style="width:122px" %)HSW10079|(% colspan="2" style="width:506px" %)(((
	1237	+* Unit: times.
	1238	+* Range: 0 to 100
	1239	+)))
	1240	+|(% style="width:173px" %)Retry timeout|(% style="width:122px" %)HSW10080|(% colspan="2" style="width:506px" %)(((
	1241	+* Unit: s.
	1242	+* Range: 0 to 30
	1243	+)))
895	895	|(% style="width:173px" %)HMI station number|(% style="width:122px" %)HSW10081|(% colspan="2" style="width:506px" %)
896	896	|(% style="width:173px" %)PLC station number|(% style="width:122px" %)HSW10082|(% colspan="2" style="width:506px" %)
897	897	|(% colspan="1" rowspan="11" style="width:102px" %)COM2-2|(% style="width:173px" %)Communication mode|(% style="width:122px" %)HSW10105|(% colspan="2" style="width:506px" %)(((
...	...	@@ -922,10 +922,22 @@
922	922	* =1: ODD
923	923	* =2: EVEN
924	924	)))
925		-|(% style="width:173px" %)Wait timeout|(% style="width:122px" %)HSW10110|(% colspan="2" style="width:506px" %)Unit: ms. Range: 0~~30000
926		-|(% style="width:173px" %)receive timeout|(% style="width:122px" %)HSW10111|(% colspan="2" style="width:506px" %)Unit: ms. Range: 0~~30000
927		-|(% style="width:173px" %)Retry time|(% style="width:122px" %)HSW10112|(% colspan="2" style="width:506px" %)Unit: times. Range: 0~~100
928		-|(% style="width:173px" %)Retry timeout|(% style="width:122px" %)HSW10113|(% colspan="2" style="width:506px" %)Unit: s. Range: 0~~30
	1274	+|(% style="width:173px" %)Wait timeout|(% style="width:122px" %)HSW10110|(% colspan="2" style="width:506px" %)(((
	1275	+* Unit: ms.
	1276	+* Range: 0 to 30000
	1277	+)))
	1278	+|(% style="width:173px" %)receive timeout|(% style="width:122px" %)HSW10111|(% colspan="2" style="width:506px" %)(((
	1279	+* Unit: ms.
	1280	+* Range: 0 to 30000
	1281	+)))
	1282	+|(% style="width:173px" %)Retry time|(% style="width:122px" %)HSW10112|(% colspan="2" style="width:506px" %)(((
	1283	+* Unit: times.
	1284	+* Range: 0 to 100
	1285	+)))
	1286	+|(% style="width:173px" %)Retry timeout|(% style="width:122px" %)HSW10113|(% colspan="2" style="width:506px" %)(((
	1287	+* Unit: s.
	1288	+* Range: 0 to 30
	1289	+)))
929	929	|(% style="width:173px" %)HMI station number|(% style="width:122px" %)HSW10114|(% colspan="2" style="width:506px" %)
930	930	|(% style="width:173px" %)PLC station number|(% style="width:122px" %)HSW10115|(% colspan="2" style="width:506px" %)
931	931	|(% colspan="1" rowspan="11" style="width:102px" %)COM3|(% style="width:173px" %)Communication mode|(% style="width:122px" %)HSW10083|(% colspan="2" style="width:506px" %)(((
...	...	@@ -955,29 +955,48 @@
955	955	* =1: ODD
956	956	* =2: EVEN
957	957	)))
958		-|(% style="width:173px" %)Wait timeout|(% style="width:122px" %)HSW10088|(% colspan="2" style="width:506px" %)Unit: ms. Range: 0~~30000
959		-|(% style="width:173px" %)receive timeout|(% style="width:122px" %)HSW10089|(% colspan="2" style="width:506px" %)Unit: ms. Range: 0~~30000
960		-|(% style="width:173px" %)Retry time|(% style="width:122px" %)HSW10090|(% colspan="2" style="width:506px" %)Unit: times. Range: 0~~100
961		-|(% style="width:173px" %)Retry timeout|(% style="width:122px" %)HSW10091|(% colspan="2" style="width:506px" %)Unit: s. Range: 0~~30
	1319	+|(% style="width:173px" %)Wait timeout|(% style="width:122px" %)HSW10088|(% colspan="2" style="width:506px" %)(((
	1320	+* Unit: ms.
	1321	+* Range: 0 to 30000
	1322	+)))
	1323	+|(% style="width:173px" %)receive timeout|(% style="width:122px" %)HSW10089|(% colspan="2" style="width:506px" %)(((
	1324	+* Unit: ms.
	1325	+* Range: 0 to 30000
	1326	+)))
	1327	+|(% style="width:173px" %)Retry time|(% style="width:122px" %)HSW10090|(% colspan="2" style="width:506px" %)(((
	1328	+* Unit: times.
	1329	+* Range: 0 to 100
	1330	+)))
	1331	+|(% style="width:173px" %)Retry timeout|(% style="width:122px" %)HSW10091|(% colspan="2" style="width:506px" %)(((
	1332	+* Unit: s.
	1333	+* Range: 0 to 30
	1334	+)))
962	962	|(% style="width:173px" %)HMI station number|(% style="width:122px" %)HSW10092|(% colspan="2" style="width:506px" %)
963	963	|(% style="width:173px" %)PLC station number|(% style="width:122px" %)HSW10093|(% colspan="2" style="width:506px" %)
964	964	|(% colspan="1" rowspan="2" style="width:102px" %)CAN port|(% style="width:173px" %)CAN1 baud rate|(% style="width:122px" %)HSW010116|(% style="width:299px" %)(((
965		-Unit: K, the baud rate must be an integer, for example, when the baud rate required is 250000, just enter 250.
	1338	+Unit: K, the baud rate must be an integer.
	1339	+
	1340	+For example, when the baud rate required is 250000, just enter 250.
966	966	)))|(% colspan="1" rowspan="2" style="width:218px" %)**✎Note: **If baud rate has been modified,please wait 5 seconds,then restart the HMI to take effect.
967		-|(% style="width:173px" %)CAN2 baud rate|(% style="width:122px" %)HSW010117|(% style="width:299px" %)Unit: K, the baud rate must be an integer, for example, when the baud rate required is 250000, just enter 250.
	1342	+|(% style="width:173px" %)CAN2 baud rate|(% style="width:122px" %)HSW010117|(% style="width:299px" %)(((
	1343	+Unit: K, the baud rate must be an integer.
968	968
969		-== **Ethernet communication configuration** ==
	1345	+For example, when the baud rate required is 250000, just enter 250.
	1346	+)))
970	970
	1348	+== Ethernet communication configuration ==
	1349	+
971	971	(% class="table-bordered" %)
972		-|=(% style="width: 40px;" %)**No.**|=(% style="width: 295px;" %)**Function**|=(% style="width: 220px;" %)**Address**|=(% style="width: 336px;" %)**Description**
	1351	+|(% style="width:40px" %)**No.**|(% style="width:295px" %)**Function**|(% style="width:220px" %)**Address**|(% style="width:336px" %)**Description**
973	973	|(% rowspan="7" style="width:40px" %)1|(% colspan="1" rowspan="7" style="width:295px" %)Ethernet parameter configuration for communication number 1 in list. Configure those addresses according to connected device. After configuration, wait for 5 seconds and restart the HMI.|(% style="width:220px" %)HSW11004|(% style="width:336px" %)Device IP address high word 1
974	974	|(% style="width:220px" %)HSW11005|(% style="width:336px" %)Device IP address high word 2
975	975	|(% style="width:220px" %)HSW11006|(% style="width:336px" %)Device IP address high word 3
976	976	|(% style="width:220px" %)HSW11007|(% style="width:336px" %)Device IP address high word 4
977	977	|(% style="width:220px" %)HSW11008|(% style="width:336px" %)Device Port number
978		-|(% style="width:220px" %)HSW11009|=(% style="width: 336px;" %)(((
979		-* =2 TCP
980		-* =3 UDP
	1357	+|(% style="width:220px" %)HSW11009|(% style="width:336px" %)(((
	1358	+~=2 TCP
	1359	+
	1360	+~=3 UDP
981	981	)))
982	982	|(% style="width:220px" %)HSW11010|(% style="width:336px" %)Reserved
983	983	|(% rowspan="7" style="width:40px" %)2|(% colspan="1" rowspan="7" style="width:295px" %)Ethernet parameter configuration for communication number 2 in list. Configure those addresses according to connected device. After configuration, wait for 5 seconds and restart the HMI.|(% style="width:220px" %)HSW11011|(% style="width:336px" %)Device IP address high word 1
...	...	@@ -985,9 +985,10 @@
985	985	|(% style="width:220px" %)HSW11013|(% style="width:336px" %)Device IP address high word 3
986	986	|(% style="width:220px" %)HSW11014|(% style="width:336px" %)Device IP address high word 4
987	987	|(% style="width:220px" %)HSW11015|(% style="width:336px" %)Device Port number
988		-|(% style="width:220px" %)HSW11016|=(% style="width: 336px;" %)(((
989		-* =2 TCP
990		-* =3 UDP
	1368	+|(% style="width:220px" %)HSW11016|(% style="width:336px" %)(((
	1369	+~=2 TCP
	1370	+
	1371	+~=3 UDP
991	991	)))
992	992	|(% style="width:220px" %)HSW11017|(% style="width:336px" %)Reserved
993	993	|(% style="width:40px" %)…|(% style="width:295px" %) |(% style="width:220px" %)…|(% style="width:336px" %)…
...	...	@@ -996,16 +996,22 @@
996	996	|(% style="width:220px" %)HSW11223|(% style="width:336px" %)Device IP address high word 3
997	997	|(% style="width:220px" %)HSW11224|(% style="width:336px" %)Device IP address high word 4
998	998	|(% style="width:220px" %)HSW11225|(% style="width:336px" %)Device Port number
999		-|(% style="width:220px" %)HSW11226|=(% style="width: 336px;" %)2 TCP; =3 UDP
	1380	+|(% style="width:220px" %)HSW11226|(% style="width:336px" %)(((
	1381	+~=2 TCP;
	1382	+
	1383	+~=3 UDP
	1384	+)))
1000	1000	|(% style="width:220px" %)HSW11227|(% style="width:336px" %)Reserved
1001	1001
1002		-(% class="wikigeneratedid" %)
	1387	+(% class="box infomessage" %)
	1388	+(((
1003	1003	**✎Note:** The number of Ethernet connections supported by different HMI series varies.
	1390	+)))
1004	1004
1005		-== **Communication control** ==
	1392	+== Communication control ==
1006	1006
1007	1007	(% class="table-bordered" %)
1008		-|(% style="width:135px" %)**Communication No.**|(% style="width:102px" %)**Station No.**|(% style="width:185px" %)**Control bit**|(% style="width:191px" %)**Communication lamp**|(% style="width:271px" %)**Description**
	1395	+|=(% style="width: 135px;" %)**Communication No.**|=(% style="width: 102px;" %)**Station No.**|=(% style="width: 185px;" %)**Control bit**|=(% style="width: 191px;" %)**Communication lamp**|=(% style="width: 271px;" %)**Description**
1009	1009	|(% colspan="1" rowspan="16" style="width:135px" %)1|(% style="width:102px" %)0~~15|(% style="width:185px" %)HSX550.0～HSX550.15|(% style="width:191px" %)HSX558.0～HSX558.15|(% rowspan="160" style="width:271px" %)Communication number refers to the number in "Communication Port Configuration". A number provides 256 device station numbers. Each station number corresponds to a communication control bit and a communication indicator bit. Registers HSX550.0 to HSX805.15 are used to control the station numbers from 0 to 127, and registers HSX1150.0 to HSX1405.15 are used to control station numbers 128 to 255.
1010	1010	|(% style="width:102px" %)16~~31|(% style="width:185px" %)HSX551.0～HSX551.15|(% style="width:191px" %)HSX559.0～HSX559.15
1011	1011	|(% style="width:102px" %)32~~47|(% style="width:185px" %)HSX552.0～HSX552.15|(% style="width:191px" %)HSX560.0～HSX560.15

6.png

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.Mora

Size

...	...	@@ -1,0 +1,1 @@
	1	+20.1 KB

Content