Changes for page 13 HMI Internal Registers

Summary

• Page properties (3 modified, 0 added, 0 removed)
• Attachments (0 modified, 1 added, 0 removed)
  • 6.png

Details

Page properties

Title

...	...	@@ -1,1 +1,1 @@
1		-12 HMI internal registers
	1	+14 HMI Internal Registers

Parent

...	...	@@ -1,1 +1,1 @@
1		-PIStudio.1 User Manual.WebHome
	1	+PIStudio.WebHome

Content

...	...	@@ -4,28 +4,32 @@
4	4
5	5	*HSW, HDW, HUW, HAW are word address, HSX, HDX, HUX, HAX are bit address.
6	6
7		-1. **System data area (HSW): **A special register defined by the system.
8		-1. **Data storage area (HDW/HDX): **Users store user data.
9		-1. **System data area (HUW): **A special register defined by the system.
10		-1. **System Data (HAW)**: System register used for power-off save.
11		-1. **Recipe index area (RPW): **System register used for recipe index.
	7	+* **System data area (HSW): **A special register defined by the system.
	8	+* **Data storage area (HDW/HDX): **Users store user data.
	9	+* **System data area (HUW): **A special register defined by the system.
	10	+* **System Data (HAW)**: System register used for power-off save.
	11	+* **Recipe index area (RPW): **System register used for recipe index.
12	12
13	13	HMI internal registers are divided into bit address and word address, which can be accessed in two ways (take HDW as an example).
14	14
15		-1. Access as word with the prefix "HDW".
	15	+* Access as word with the prefix "HDW".
	16	+** HDW0 means the 1st word of system data area. HDW1 means the 2nd word of system data area.
	17	+* Access as bit with the prefix "HDX".  The number before "." i".  The number before Access in bit with the prefix "HD".  The number before Access in bit with the prefix "HDX". The number before "." indicates the number of the word. The number after "." indicates the bit number of the word.
	18	+** HDX1020.12 means to access the system data area in bit mode, the specific location is the 13th bit of the 1020 word.
16	16
17		-* HDW0 means the 1st word of system data area. HDW1 means the 2nd word of system data area.
18		-
19		-(% start="2" %)
20		-1. Access as bit with the prefix "HDX".  The number before "." i".  The number before Access in bit with the prefix "HD".  The number before Access in bit with the prefix "HDX". The number before "." indicates the number of the word. The number after "." indicates the bit number of the word.
21		-
22		-* HDX1020.12 means to access the system data area in bit mode, the specific location is the 13th bit of the 1020 word.
23		-
	20	+(% class="box infomessage" %)
	21	+(((
24	24	**✎Note:**
25	25
26	26	* Addresses in HDX are the bits from words in HDW, so be careful when using addresses. For example, HDX1020.12 is the 13th bit to access the 1020 word. The value of this bit is the same as that of the word accessed through HDW001020. The 13th bit of this word is actually the same bit as HDX1020.12.
27	27	* The address of the bit address HDX is with a decimal point while word addresses are integers.
	26	+)))
28	28
	28	+= Address ranges table =
	29	+
	30	+(% style="text-align:center" %)
	31	+[[image:6.png]]
	32	+
29	29	= **Data storage area (HDW/HDX)** =
30	30
31	31	It is used to save the temporary data of project.
...	...	@@ -40,30 +40,39 @@
40	40	1. Access as word, and serial number range is from HAW0 to HAW199999.
41	41	1. Access as bit, and serial number range is from HAX0.0 to HAX199999.15.
42	42
	47	+(% class="box infomessage" %)
	48	+(((
43	43	**✎Note:**
44	44
45	45	* HAW/HAX is power-down retention. The register of this type is able to save the data before the power-down.
46	46	* To avoid possible device failure, do not immediately power off and reboot when configuring the power-down save addre
	53	+)))
47	47
48	48	= **Recipe index area (RPW)** =
49	49
50	50	It is system recipe data power-off save register. The range is from RPW000000 to RPW990450.
51	51
	59	+(% class="box infomessage" %)
	60	+(((
52	52	**✎Note:**
53	53
54	54	* RPW is power-down retention. The register of this type is able to save the data before the power-down.
55	55	* To avoid possible device failure, do not immediately power off and reboot when configuring the power-down save addre
	65	+)))
56	56
57	57	= **Single user data area (HUW/HUX)** =
58	58
59	59	It is used for system special registers (reserved by system).
60	60
61		-1. Access as word, and serial number range is from HUW0 to HUW199999.
62		-1. Access as bit, and serial number range is from HUX0.0 to HUX199999.15.
	71	+1. Access as word, and serial number range is from HUW0 to HUW1599.
	72	+1. Access as bit, and serial number range is from HUX0.0 to HUX1599.15.
63	63
	74	+(% class="box infomessage" %)
	75	+(((
64	64	**✎Note:**
65	65
66	66	* HUW/HUX is a system special register, so please check the system special register list during use. Please use the address specified in the table and do not use the address which is not mentioned in the table.
	79	+)))
67	67
68	68	(% class="table-bordered" %)
69	69	|=**Special register address**|=**Description**|=**Function**
...	...	@@ -125,16 +125,19 @@
125	125	1. Access as word, and serial number range is from HSW0 to HSW49999. (HSW10000 to HSW19999 are the power-off storage areas)
126	126	1. Access as bit, and serial number range is from HSX0.0 to HSX49999.15.
127	127
	141	+(% class="box infomessage" %)
	142	+(((
128	128	**✎Note:**
129	129
130	130	* HSW / HSX are a system special register, so please check the system special register list during use. Please use the address specified in the table and do not use the address which is not mentioned in the table.
131	131	* To avoid possible device failure, do not immediately power off and reboot when configuring the power-down save address.
	147	+)))
132	132
133	133	(% class="table-bordered" style="width:1024px" %)
134	134	|=(% scope="row" style="width: 160px;" %)**Address**|=(% style="width: 282px;" %)**Function**|=(% style="width: 452px;" %)**Description**
135	135	|=(% style="width: 160px;" %)HSW0|(% style="width:282px" %)Language switch|(% style="width:452px" %)Multiple language could be set in the project, HMI support maximum 8 languages. (Power-down save supported)
136		-|=(% style="width: 160px;" %)HSW1|(% style="width:282px" %)Beep frequency|(% style="width:452px" %)Frequency range: 0~~4000
137		-|=(% style="width: 160px;" %)HSW2|(% style="width:282px" %)Beep volume|(% style="width:452px" %)Volume range: 0~~80
	152	+|=(% style="width: 160px;" %)HSW1|(% style="width:282px" %)Beep frequency (Only valid in HMI V1.0 System)|(% style="width:452px" %)Frequency range: 0~~4000
	153	+|=(% style="width: 160px;" %)HSW2|(% style="width:282px" %)Beep volume (Only valid in HMI V1.0 System)|(% style="width:452px" %)Volume range: 0~~80
138	138	|=(% style="width: 160px;" %)HSW3|(% style="width:282px" %)Beep time|(% style="width:452px" %)Unit: ms
139	139	|=(% style="width: 160px;" %)HSW4|(% style="width:282px" %)Beep whether enable or not|(% style="width:452px" %)(((
140	140	* =0: Enable.
...	...	@@ -148,7 +148,7 @@
148	148	)))
149	149	|=(% style="width: 160px;" %)HSW6~~HSW7|(% style="width:282px" %)Number of alarms|(% style="width:452px" %)The number of alarm (it also includes the records of alarm confirmed)
150	150	|=(% style="width: 160px;" %)HSW8|(% style="width:282px" %)Number of unconfirmed history alarm|(% style="width:452px" %)The number of unconfirmed history alarm
151		-|=(% style="width: 160px;" %)HSW9|(% style="width:282px" %)Time out tip|(% style="width:452px" %)(((
	167	+|=(% style="width: 160px;" %)HSW9|(% style="width:282px" %)Time out prompt|(% style="width:452px" %)(((
152	152	* =0: Enable
153	153	* =1: Disable
154	154	)))
...	...	@@ -173,12 +173,16 @@
173	173	* =5: Friday.
174	174	* =6: Saturday.
175	175	)))
	192	+|=(% style="width: 160px;" %)HSW39|(% style="width:282px" %)Beep type(Only valid in HMI V2.0 System)|(% style="width:452px" %)Type range: 1-5, Default is 1.
176	176	|=(% style="width: 160px;" %)HSW134|(% style="width:282px" %)(((
177	177	Whether the Script is read through
178	178
179	179
180	180	)))|(% style="width:452px" %)(((
	198	+(% class="box infomessage" %)
	199	+(((
181	181	**✎Note:** If want to read-only or write-only, please enable this settings.
	201	+)))
182	182
183	183	* =0: Read from HMI cache(Default)
184	184	* =1: Read from PLC directly
...	...	@@ -239,8 +239,8 @@
239	239	* =2: HSX521.1=1, delete all trend graph.
240	240	* =4: HSX521.2=1, delete all alarms.
241	241	* =16: HSX521.4=1, delete history XY plot.
242		-* =32: HSX521.5=1, delete data records in SD card or flash dish;(Please make a setting which is saved to flash disk or SD card in project setting).
243		-* =64: HSX521.6=1, delete alarms records in SD card or flash dish; (Please make a setting which is saved to flash disk or SD card in project setting).
	262	+* =32: HSX521.5=1, delete data records in SD card or USB flash disk;(Please make a setting which is saved to USB flash disk or SD card in project setting).
	263	+* =64: HSX521.6=1, delete alarms records in SD card or USB flash disk; (Please make a setting which is saved to USB flash disk or SD card in project setting).
244	244	)))
245	245	|=(% style="width: 160px;" %)HSW522|(% style="width:282px" %)Copy and paste the alarm/data files in flash to the USB flash disk|(% style="width:452px" %)(((
246	246	* =0: No operation
...	...	@@ -289,7 +289,7 @@
289	289	* =2: Ejecting SD card, please waiting…
290	290	* =3: SD card ejected
291	291	)))
292		-|=(% style="width: 160px;" %)HSW550~~849|(% style="width:282px" %)Communication control|(% style="width:452px" %)For communication control and communication lamp (please refer to "[[communication control>>http://13.229.109.52:8080/wiki/pistudio/view/Helps/13.HMI%20internal%20registers/#HCommunicationcontrol]]" sector for detailed)
	312	+|=(% style="width: 160px;" %)HSW550~~849|(% style="width:282px" %)Communication control|(% style="width:452px" %)For communication control and communication lamp (please refer to "[[Communication control>>http://13.229.109.52:8080/wiki/pistudio/view/Helps/13.HMI%20internal%20registers/#HCommunicationcontrol]]" sector for detailed)
293	293	|=(% style="width: 160px;" %)HSW850|(% style="width:282px" %)(((
294	294	Network state
295	295
...	...	@@ -337,14 +337,16 @@
337	337	* HDX882.1=0 SD card doesn't execute storage or storage finished.
338	338	* HDX882.1=1 SD card is reading data, don't remove SD card.
339	339	)))
340		-|=(% style="width: 160px;" %)HSW884|(% style="width:282px" %)Enter setup screen|(% style="width:452px" %)(((
341		-* = 0: Do not into setup screen
342		-* = 1: Enter setup screen
	360	+|=(% style="width: 160px;" %)HSW884|(% style="width:282px" %)Enter the system network configuration interface|(% style="width:452px" %)(((
	361	+* = 0: Do not enter the network configuration interface
	362	+* = 1: Enter the system network configuration interface.
	363	+** ig series HMI only supports to enter the system interface
	364	+
343	343	)))
344	344	|=(% style="width: 160px;" %)HSW885|(% style="width:282px" %)When the control object hides the address is read failed (communication failure), set the display mode of the object|(% style="width:452px" %)(((
345	345	* = 0: displayed by object setting.
346		-* =1: control address read failure, the address control of all objects is hidden, not displayed.
347		-* =2: control address read failure, the address control of all objects is displayed, not hidden.
	368	+* = 1: control address read failure, the address control of all objects is hidden, not displayed.
	369	+* = 2: control address read failure, the address control of all objects is displayed, not hidden.
348	348	)))
349	349	|=(% style="width: 160px;" %)HSW893|(% style="width:282px" %)(((
350	350	User Permission Control Address, same as HUW1000 feature, please refer to chapter "[[User Permission>>http://13.229.109.52:8080/wiki/pistudio/view/Helps/08.Basic%20Function/#HUserPermission]]"
...	...	@@ -367,7 +367,7 @@
367	367	|=(% style="width: 160px;" %)HSW900|(% style="width:282px" %)Quick update frequency settings for objects|(% style="width:452px" %)(((
368	368	Valid when the object is enabled for "quick update". Default: 5.
369	369
370		-Range: 1 (fastest) ~~ 50 (slowest)
	392	+Range: 1 (fastest) - 50 (slowest)
371	371	)))
372	372	|=(% style="width: 160px;" %)HSW920|(% style="width:282px" %)Static mode Maximum periods|(% style="width:452px" %)Numeric Input/ Display (range: 0-12)
373	373	|=(% style="width: 160px;" %)HSW921 ~~ 924|(% style="width:282px" %)Static mode Admin key|(% style="width:452px" %)Character Input/ Display (length: 8)
...	...	@@ -417,8 +417,11 @@
417	417	|=(% style="width: 160px;" %)HSW1070|(% style="width:282px" %)The time interval (seconds) since the last time the screen was clicked|(% style="width:452px" %)(((
418	418	Shows how long the current screen has not been clicked, using a decimal unsigned double word (Numeric Input/ Display).
419	419
	442	+(% class="box infomessage" %)
	443	+(((
420	420	**✎Note: **This register is cleared to zero regardless of which user clicks on the screen.
421	421	)))
	446	+)))
422	422	|=(% style="width: 160px;" %)HSW1073|(% style="width:282px" %)Corresponding key value from keyboard|(% style="width:452px" %)Display the key value of the currently pressed key, the key value is shown in Table 1 (not updated when the character input display is being input)
423	423	|=(% style="width: 160px;" %)HSW1074|(% style="width:282px" %)Keyboard key status|(% style="width:452px" %)Display the current button status (not updated when the numeric input display is being input)(((
424	424	* =0: key release
...	...	@@ -446,7 +446,7 @@
446	446	Address mapping polling cycle, effective range: 40~~1000ms, default: 300ms.
447	447
448	448	* When the set value is greater than 1000, the value is 1000.
449		-* When the set value is greater than 1000, it changes to the default value 300
	474	+* When the set value is lower than 40, it changes to the default value 300
450	450	)))
451	451	|=(% style="width: 160px;" %)HSW1087|(% style="width:282px" %)Control write interval in address mapping|(% style="width:452px" %)(((
452	452	After reading data to the device for N times, Perform an address mapping write operation. N is the interval value. The effective range: 0~~5, and default is 2.
...	...	@@ -481,6 +481,8 @@
481	481	* =0, Default value
482	482	* =1, Release the alarm generated before the last power-down when starting up
483	483	)))
	509	+|=(% style="width: 160px;" %)HSW1200|(% colspan="1" rowspan="2" style="width:282px" %)TSAP settings for HMI in the Siemens LOGO! 8 protocol(ig series or HMI V2.0)|(% style="width:452px" %)HMI local TSAP, which corresponds to the remote TSAP of PLC
	510	+|=(% style="width: 160px;" %)HSW1201|(% style="width:452px" %)HMI remote TSAP, which corresponds to the local TSAP of PLC
484	484	|=(% style="width: 160px;" %)HSW1450|(% style="width:282px" %)Enable objects level password function|(% style="width:452px" %)(((
485	485	* =0, Disable
486	486	* =1, Enable
...	...	@@ -508,6 +508,10 @@
508	508	* HSX1502.0=1: Modification comfirmed. Save the data of HSW1450~~HSW1501 to a file for immediate effect.
509	509	* HSX1502.1=1:Modification cancelled. Restore the current data of hSW1450-HSW1501 to the data saved in the file last time.
510	510	)))
	538	+|=(% style="width: 160px;" %)HSW1509|(% style="width:282px" %)Curve width|(% style="width:452px" %)(((
	539	+* =0: Use the curve width set by project default.
	540	+* =1 to 10: use special register to set curve width.
	541	+)))
511	511	|=(% style="width: 160px;" %)HSW1603|(% style="width:282px" %)Number of current unreleased alarms|(% style="width:452px" %)The number of current unreleased alarms in alarm record file.
512	512	|=(% style="width: 160px;" %)HSW1604|(% style="width:282px" %)The auxiliary judgment address when the control bit in the Object Lock fails to be read|(% style="width:452px" %)(((
513	513	* =0: The auxiliary address is invalid.
...	...	@@ -583,6 +583,9 @@
583	583	* =0: Server connection exception
584	584	* =1: Server connection is OK
585	585	)))
	617	+|=(% style="width: 160px;" %)HSW1740|(% style="width:282px" %)Wi-fi signal strength|(% style="width:452px" %)(((
	618	+Display the value of Wi-fi signal signal strength, ranges from 0~~100 (Signal strength is automatically obtained only once when HMI is powered on, and it will not be automatically updated. It needs to be used with the HSW1890)
	619	+)))
586	586	|=(% style="width: 160px;" %)HSW1741|(% colspan="1" rowspan="12" style="width:282px" %)Related IP register in 4Gnetwork status (It is valid when HMI is connected to 4G)|(% style="width:452px" %)Local IP address high byte 1
587	587	|=(% style="width: 160px;" %)HSW1742|(% style="width:452px" %)Local IP address high byte 2
588	588	|=(% style="width: 160px;" %)HSW1743|(% style="width:452px" %)Local IP address high byte 3
...	...	@@ -610,10 +610,180 @@
610	610	* =1: Server connection is OK
611	611	)))
612	612	|=(% style="width: 160px;" %)HSW1761|(% style="width:282px" %)Display 4G network signal strength|(% style="width:452px" %)Signal strength: 0~~31. The greater the value ,the signal is stronger
	647	+|=(% style="width: 160px;" %)(((
	648	+HSW1762
	649	+)))|(% colspan="1" rowspan="13" style="width:282px" %)(((
	650	+Note: Valid when Ethernet2 of HMI is plugged into the network cable.
	651	+①、When the Ethernet setting is enabled in the project parameters, this register displays the set value.
	652	+②. When the Ethernet setting is not enabled in the engineering parameters, the register displays the Ethernet IP automatically acquired by the HMI.
	653	+③. When the HMI is not plugged into the network cable, the register will show 0 whether the engineering parameters are set or not.
	654	+④.IP related registers can be read and written (only static IP mode can be written).
	655	+)))|(% style="width:452px" %)(((
	656	+Ethernet2 Local IP address high byte 1
	657	+)))
	658	+|=(% style="width: 160px;" %)(((
	659	+HSW1763
	660	+)))|(% style="width:452px" %)(((
	661	+Ethernet2 Local IP address high byte 2
	662	+)))
	663	+|=(% style="width: 160px;" %)(((
	664	+HSW1764
	665	+)))|(% style="width:452px" %)(((
	666	+Ethernet2 Local IP address high byte 3
	667	+)))
	668	+|=(% style="width: 160px;" %)(((
	669	+HSW1765
	670	+)))|(% style="width:452px" %)(((
	671	+Ethernet2 Local IP address high byte 4
	672	+)))
	673	+|=(% style="width: 160px;" %)(((
	674	+HSW1766
	675	+)))|(% style="width:452px" %)(((
	676	+Ethernet2 Local mask IP address high byte 1
	677	+)))
	678	+|=(% style="width: 160px;" %)(((
	679	+HSW1767
	680	+)))|(% style="width:452px" %)(((
	681	+Ethernet2 Local mask IP address high byte 2
	682	+)))
	683	+|=(% style="width: 160px;" %)(((
	684	+HSW1768
	685	+)))|(% style="width:452px" %)Ethernet2 Local mask IP address high byte 3
	686	+|=(% style="width: 160px;" %)HSW1769|(% style="width:452px" %)Ethernet2 Local mask IP address high byte 4
	687	+|=(% style="width: 160px;" %)(((
	688	+HSW1770
	689	+)))|(% style="width:452px" %)(((
	690	+Ethernet2 Local gateway IP address high byte 1
	691	+)))
	692	+|=(% style="width: 160px;" %)(((
	693	+HSW1771
	694	+)))|(% style="width:452px" %)(((
	695	+Ethernet2 Local gateway IP address high byte 2
	696	+)))
	697	+|=(% style="width: 160px;" %)(((
	698	+HSW1772
	699	+)))|(% style="width:452px" %)(((
	700	+Ethernet2 Local gateway IP address high byte 3
	701	+)))
	702	+|=(% style="width: 160px;" %)(((
	703	+HSW1773
	704	+)))|(% style="width:452px" %)(((
	705	+Ethernet2 Local gateway IP address high byte 4
	706	+)))
	707	+|=(% style="width: 160px;" %)(((
	708	+HSW1774
	709	+)))|(% style="width:452px" %)(((
	710	+Ethernet2 Local Port Address
	711	+)))
	712	+|=(% style="width: 160px;" %)(((
	713	+HSW1775
	714	+)))|(% colspan="1" rowspan="6" style="width:282px" %)(((
	715	+①Display the MAC code of Ethernet2 NIC
	716	+
	717	+(hexadecimal display)
	718	+
	719	+②Read-only mode, not modifiable
	720	+)))|(% style="width:452px" %)(((
	721	+Ethernet2 Local MAC code high byte 1
	722	+)))
	723	+|=(% style="width: 160px;" %)(((
	724	+HSW1776
	725	+)))|(% style="width:452px" %)(((
	726	+Ethernet2 Local MAC code high byte 2
	727	+)))
	728	+|=(% style="width: 160px;" %)(((
	729	+HSW1777
	730	+)))|(% style="width:452px" %)(((
	731	+Ethernet2 Local MAC code high byte 3
	732	+)))
	733	+|=(% style="width: 160px;" %)(((
	734	+HSW1778
	735	+)))|(% style="width:452px" %)(((
	736	+Ethernet2 Local MAC code high byte 4
	737	+)))
	738	+|=(% style="width: 160px;" %)(((
	739	+HSW1779
	740	+)))|(% style="width:452px" %)(((
	741	+Ethernet2 Local MAC code high byte 5
	742	+)))
	743	+|=(% style="width: 160px;" %)(((
	744	+HSW1780
	745	+)))|(% style="width:452px" %)(((
	746	+Ethernet2 Local MAC code high byte 6
	747	+)))
	748	+|=(% style="width: 160px;" %)(((
	749	+HSW1781
	750	+)))|(% colspan="1" rowspan="8" style="width:282px" %)(((
	751	+①Display and modify DNS1 and DNS2 of Ethernet2
	752	+
	753	+②Related registers can be read and written mode (only static IP mode can be written)
	754	+)))|(% style="width:452px" %)(((
	755	+Ethernet2 Local DNS1 address high byte 1
	756	+)))
	757	+|=(% style="width: 160px;" %)(((
	758	+HSW1782
	759	+)))|(% style="width:452px" %)(((
	760	+Ethernet2 Local DNS1 address high byte 2
	761	+)))
	762	+|=(% style="width: 160px;" %)(((
	763	+HSW1783
	764	+)))|(% style="width:452px" %)(((
	765	+Ethernet2 Local DNS1 address high byte 3
	766	+)))
	767	+|=(% style="width: 160px;" %)(((
	768	+HSW1784
	769	+)))|(% style="width:452px" %)(((
	770	+Ethernet2 Local DNS1 address high byte 4
	771	+)))
	772	+|=(% style="width: 160px;" %)(((
	773	+HSW1785
	774	+)))|(% style="width:452px" %)(((
	775	+Ethernet2 Local DNS2 address high byte 1
	776	+)))
	777	+|=(% style="width: 160px;" %)(((
	778	+HSW1786
	779	+)))|(% style="width:452px" %)(((
	780	+Ethernet2 Local DNS2 address high byte 2
	781	+)))
	782	+|=(% style="width: 160px;" %)(((
	783	+HSW1787
	784	+)))|(% style="width:452px" %)(((
	785	+Ethernet2 Local DNS2 address high byte 3
	786	+)))
	787	+|=(% style="width: 160px;" %)(((
	788	+HSW1788
	789	+)))|(% style="width:452px" %)(((
	790	+Ethernet2 Local DNS2 address high byte 4
	791	+)))
	792	+|=(% style="width: 160px;" %)(((
	793	+HSW1789
	794	+)))|(% colspan="1" style="width:282px" %)(((
	795	+Display or set the dynamic or static IP mode of Ethernet2
	796	+)))|(% style="width:452px" %)(((
	797	+HSX1789.0 = 0, Static IP mode
	798	+
	799	+HSX1789.0 = 1, dynamic IP mode
	800	+)))
	801	+|=(% style="width: 160px;" %)(((
	802	+HSW1790
	803	+)))|(% colspan="1" style="width:282px" %)(((
	804	+Confirm Ethernet2 IP, subnet mask, gateway, DNS1, DNS2, and dynamic static IP settings
	805	+)))|(% style="width:452px" %)(((
	806	+~= 1, confirm the setting (i.e., after modifying IP-related information, set this address to 1, representing confirmation of the modification, after which it will be reset to 0)
	807	+)))
	808	+|=(% style="width: 160px;" %)(((
	809	+HSW1791
	810	+)))|(% colspan="1" style="width:282px" %)(((
	811	+Network status of the Ethernet2 connection server
	812	+)))|(% style="width:452px" %)(((
	813	+~= 0, connection to the server is abnormal = 1, connection to the server is normal
	814	+)))
613	613	|=(% style="width: 160px;" %)HSW1852|(% style="width:282px" %)Control the interval in two consecutive clicks|(% style="width:452px" %)Limit range: 1~~500ms. The default is 100 ms.
614	614	|=(% style="width: 160px;" %)HSW1853|(% style="width:282px" %)File format for exporting data records to USB flash drive or SD card|(% style="width:452px" %)(((
615	615	* =0: db database
616	616	* =1: CSV
	819	+
	820	+(Only valid for script function DbToCsvFile)
617	617	)))
618	618	|=(% style="width: 160px;" %)HSW1854|(% style="width:282px" %)High and low word conversion type|(% style="width:452px" %)(((
619	619	* =0: use the old high-low word conversion (default)
...	...	@@ -635,14 +635,96 @@
635	635	* =1: download firmware
636	636	* =2: enter the background
637	637	)))
	842	+|=(% style="width: 160px;" %)HSW1865|(% style="width:282px" %)Priority connection to the cloud|(% style="width:452px" %)(((
	843	+* =0: priority Ethernet
	844	+* =1: priority WLAN
	845	+* =2: priority 4G
	846	+)))
	847	+|=(% style="width: 160px;" %)HSW1866|(% style="width:282px" %)Delete the Lua extension module file|(% style="width:452px" %)(((
	848	+* =0: delete;
	849	+* = Others: do not delete
	850	+)))
	851	+|=(% style="width: 160px;" %)HSW1867|(% style="width:282px" %)Reset mode|(% style="width:452px" %)(((
	852	+Monitor address is set during reset of reset switch, whether to cancel reset,
	853	+
	854	+* = 0: yes (default);
	855	+* = 1: no
	856	+)))
	857	+|=(% style="width: 160px;" %)HSW1868|(% style="width:282px" %)Double-click or long press the record type table mode|(% style="width:452px" %)(((
	858	+Controls whether the button pops up when double-clicking or long pressing on record type table object
	859	+
	860	+* = 0: yes (default);
	861	+* = 1: no
	862	+)))
	863	+|=(% style="width: 160px;" %)(((
	864	+HSW1869
	865	+)))|(% style="width:282px" %)(((
	866	+Dynamic screensaver countdown
	867	+)))|(% style="width:452px" %)(((
	868	+Countdown to enter dynamic screensaver effect, unit (S)
	869	+)))
	870	+|=(% style="width: 160px;" %)(((
	871	+HSW1870
	872	+)))|(% style="width:282px" %)(((
	873	+Display or set the dynamic or static IP mode of Ethernet1
	874	+)))|(% style="width:452px" %)(((
	875	+HSX1870.0 = 0, Static IP mode
	876	+
	877	+HSX1870.0 = 1, dynamic IP mode
	878	+)))
	879	+|=(% style="width: 160px;" %)(((
	880	+HSW1871
	881	+)))|(% style="width:282px" %)(((
	882	+Confirm the IP, subnet mask, gateway, DNS1, DNS2, and dynamic static IP settings for Ethernet1
	883	+)))|(% style="width:452px" %)(((
	884	+~= 1, confirm the setting (i.e., after modifying IP-related information, set this address to 1, representing confirmation of the modification, after which it will be reset to 0)
	885	+)))
	886	+|=(% style="width: 160px;" %)(((
	887	+HSW1872
	888	+)))|(% colspan="1" rowspan="8" style="width:282px" %)(((
	889	+①Display and modify DNS1 and DNS2 of Ethernet1
	890	+
	891	+②Related registers can be read and written mode (only static IP mode can be written)
	892	+)))|(% style="width:452px" %)(((
	893	+Ethernet1 Local DNS1 address high byte 1
	894	+)))
	895	+|=(% style="width: 160px;" %)(((
	896	+HSW1873
	897	+)))|(% style="width:452px" %)Ethernet1 Local DNS1 address high byte 2
	898	+|=(% style="width: 160px;" %)(((
	899	+HSW1874
	900	+)))|(% style="width:452px" %)Ethernet1 Local DNS1 address high byte 3
	901	+|=(% style="width: 160px;" %)(((
	902	+HSW1875
	903	+)))|(% style="width:452px" %)Ethernet1 Local DNS1 address high byte 4
	904	+|=(% style="width: 160px;" %)(((
	905	+HSW1876
	906	+)))|(% style="width:452px" %)Ethernet1 Local DNS2 address high byte 1
	907	+|=(% style="width: 160px;" %)(((
	908	+HSW1877
	909	+)))|(% style="width:452px" %)Ethernet1 Local DNS2 address high byte 2
	910	+|=(% style="width: 160px;" %)(((
	911	+HSW1878
	912	+)))|(% style="width:452px" %)Ethernet1 Local DNS2 address high byte 3
	913	+|=(% style="width: 160px;" %)(((
	914	+HSW1879
	915	+)))|(% style="width:452px" %)Ethernet1 Local DNS2 address high byte 4
	916	+|=(% style="width: 160px;" %)HSW1890|(% colspan="1" style="width:282px" %)Enable refresh current network signal|(% style="width:452px" %)(((
	917	+* =1: Refresh the network signal once after triggered (This register will be automatically reset after triggered, only update the signal value once after per 15 seconds, not able to update twice in the short interval)
	918	+* =Others: not refresh
	919	+)))
	920	+|=(% style="width: 160px;" %)HSW1891|(% colspan="1" style="width:282px" %)Enable clear cache for screen data  |(% style="width:452px" %)(((
	921	+* =1, not clear screen cache when switch language
	922	+* =2, trigger clear cache of all screens for once time
	923	+* =3, always clear cache of all screen data
	924	+)))
638	638	|=(% style="width: 160px;" %)HSW10000~~19999|(% style="width:282px" %)Power-down storage area|(% style="width:452px" %)After restart, the data remains
639	639	|=(% style="width: 160px;" %)HSW10035|(% rowspan="13" style="width:282px" %)(((
640		-**✎Note: **Only valid when the HMI is plugged into the Ethernet cable.
641		-
642		-1. If Ethernet settings is enabled in project parameters, this register displays the set value.
643		-1. If Ethernet settings is not enabled in project parameters, IP would automatically obtained IP.
644		-1. If HMI is not connected to the network, the register is displayed as 0 whether the engineering parameters are set.
645		-1. 4. All IP registers of HMI are read-only.
	927	+Note: Valid when Ethernet1 of HMI is plugged into the network cable.
	928	+① When the Ethernet setting is enabled in the project parameters, this register displays the set value.
	929	+② When the Ethernet setting is not enabled in the engineering parameters, the register displays the Ethernet IP automatically acquired by the HMI.
	930	+③ When the HMI is not plugged into the network cable, the register will show 0 whether the engineering parameters are set or not.
	931	+④ IP related registers can be read and written (only static IP mode can be written).
646	646	)))|(% style="width:452px" %)Local IP address high byte 1
647	647	|=(% style="width: 160px;" %)HSW10036|(% style="width:452px" %)Local IP address high byte 2
648	648	|=(% style="width: 160px;" %)HSW10037|(% style="width:452px" %)Local IP address high byte 3
...	...	@@ -657,9 +657,11 @@
657	657	|=(% style="width: 160px;" %)HSW10046|(% style="width:452px" %)Local gateway address high byte 4
658	658	|=(% style="width: 160px;" %)HSW10047|(% style="width:452px" %)Local port address
659	659	|=(% style="width: 160px;" %)HSW10048|(% rowspan="6" style="width:282px" %)(((
660		-Displays the MAC code of the current network card
	946	+①Display the MAC code of Ethernet1 NIC
661	661
662		-(Hexadecimal display)
	948	+(hexadecimal display)
	949	+
	950	+②Read-only mode, not modifiable
663	663	)))|(% style="width:452px" %)Local MAC code high word 1
664	664	|=(% style="width: 160px;" %)HSW10049|(% style="width:452px" %)Local MAC code high word 2
665	665	|=(% style="width: 160px;" %)HSW10050|(% style="width:452px" %)Local MAC code high word 3
...	...	@@ -666,7 +666,7 @@
666	666	|=(% style="width: 160px;" %)HSW10051|(% style="width:452px" %)Local MAC code high word 4
667	667	|=(% style="width: 160px;" %)HSW10052|(% style="width:452px" %)Local MAC code high word 5
668	668	|=(% style="width: 160px;" %)HSW10053|(% style="width:452px" %)Local MAC code high word 6
669		-|=(% style="width: 160px;" %)HSW10118|(% colspan="1" rowspan="2" style="width:282px" %)TSAP settings for HMI in the Siemens logo! 8 protocol|(% style="width:452px" %)HMI local TSAP, which corresponds to the remote TSAP of PLC
	957	+|=(% style="width: 160px;" %)HSW10118|(% colspan="1" rowspan="2" style="width:282px" %)TSAP settings for HMI in the Siemens LOGO! 8 protocol|(% style="width:452px" %)HMI local TSAP, which corresponds to the remote TSAP of PLC
670	670	|=(% style="width: 160px;" %)HSW10119|(% style="width:452px" %)HMI remote TSAP, which corresponds to the local TSAP of PLC
671	671	|=(% style="width: 160px;" %)HSW10461~~10493|(% style="width:282px" %)Remote access password|(% style="width:452px" %)8-character remote access password
672	672	|=(% style="width: 160px;" %)HSW10494~~10558|(% style="width:282px" %)Machine ID (Read only)|(% style="width:452px" %)Machine ID for remote access (read only 64-bit)
...	...	@@ -705,7 +705,7 @@
705	705	|=(% style="width: 160px;" %)HSW10606|(% style="width:282px" %)Printer instruction type|(% style="width:452px" %)(((
706	706	* =1: Graphic print type
707	707	* =2: Dot density printing type
708		-* =3: special for EPSON printer
	996	+* =3(Default value): special for EPSON printer
709	709	)))
710	710	|=(% style="width: 160px;" %)HSW10607|(% style="width:282px" %)Printer paper cutting function|(% style="width:452px" %)(((
711	711	* =1: Enable
...	...	@@ -734,6 +734,7 @@
734	734	* =0: LAN or the external network both OK
735	735	* =1: Only LAN access
736	736	* =2: Only external network can access
	1025	+* =3: Close the functions
737	737	)))
738	738	|=(% style="width: 160px;" %)HSW11757|(% style="width:282px" %)Enable the valid date of the dynamic installment password|(% style="width:452px" %)(((
739	739	* =0: Disabled
...	...	@@ -748,11 +748,38 @@
748	748	)))
749	749	|=(% style="width: 160px;" %)HSW11760|(% style="width:282px" %)Screensaver countdown|(% style="width:452px" %)Display the countdown to enter the Screensaver, unit: second.
750	750	|=(% style="width: 160px;" %)HSW11761|(% style="width:282px" %)Screensaver screen number|(% style="width:452px" %)Set the screen number for Screensaver
	1040	+|=(% style="width: 160px;" %)(((
	1041	+HSW11762
	1042	+)))|(% style="width:282px" %)(((
	1043	+Dynamic screensaver control address
	1044	+)))|(% style="width:452px" %)(((
	1045	+HSX11762.0=0, initialize with project configuration;
751	751
752		-== **Serial port communication configuration** ==
	1047	+HSX11762.0=1, initialize with special register configuration;
753	753
	1049	+HSX11762.1=0, disable dynamic screensaver;
	1050	+
	1051	+HSX11762.1=1, enable dynamic screensaver
	1052	+)))
	1053	+|=(% style="width: 160px;" %)(((
	1054	+HSW11763
	1055	+)))|(% style="width:282px" %)(((
	1056	+Waiting time to enter the dynamic screensaver
	1057	+)))|(% style="width:452px" %)(((
	1058	+Waiting time when the screen is not operated, range 1~~720 minutes
	1059	+)))
	1060	+|=(% style="width: 160px;" %)(((
	1061	+HSW11764
	1062	+)))|(% style="width:282px" %)(((
	1063	+Animated screensaver animation type
	1064	+)))|(% style="width:452px" %)(((
	1065	+~=0: Raster,=1: Blinds,=2: Bubble
	1066	+)))
	1067	+
	1068	+== Serial port communication configuration ==
	1069	+
754	754	(% class="table-bordered" %)
755		-|=(% style="width: 102px;" %)Port|=(% style="width: 173px;" %)**Function**|=(% style="width: 122px;" %)**Address**|=(% colspan="2" style="width: 506px;" %)**Description**
	1071	+|=(% scope="row" style="width: 102px;" %)Port|=(% style="width: 173px;" %)**Function**|=(% style="width: 122px;" %)**Address**|=(% colspan="2" style="width: 506px;" %)**Description**
756	756	|(% colspan="1" rowspan="11" style="width:102px" %)COM1|(% style="width:173px" %)Communication mode|(% style="width:122px" %)HSW10061|(% colspan="2" style="width:506px" %)(((
757	757	* =0: RS232
758	758	* =1: RS485
...	...	@@ -782,10 +782,22 @@
782	782	* =1: ODD
783	783	* =2: EVEN
784	784	)))
785		-|(% style="width:173px" %)Wait timeout|(% style="width:122px" %)HSW10066|(% colspan="2" style="width:506px" %)Unit: ms. Range: 0~~30000
786		-|(% style="width:173px" %)reveive timeout|(% style="width:122px" %)HSW10067|(% colspan="2" style="width:506px" %)Unit: ms. Range: 0~~30000
787		-|(% style="width:173px" %)Retry time|(% style="width:122px" %)HSW10068|(% colspan="2" style="width:506px" %)Unit: times. Range: 0~~100
788		-|(% style="width:173px" %)Retry timeout|(% style="width:122px" %)HSW10069|(% colspan="2" style="width:506px" %)Unit: s. Range: 0~~300
	1101	+|(% style="width:173px" %)Wait timeout|(% style="width:122px" %)HSW10066|(% colspan="2" style="width:506px" %)(((
	1102	+* Unit: ms.
	1103	+* Range: 0 to 30000
	1104	+)))
	1105	+|(% style="width:173px" %)reveive timeout|(% style="width:122px" %)HSW10067|(% colspan="2" style="width:506px" %)(((
	1106	+* Unit: ms.
	1107	+* Range: 0 to 30000
	1108	+)))
	1109	+|(% style="width:173px" %)Retry time|(% style="width:122px" %)HSW10068|(% colspan="2" style="width:506px" %)(((
	1110	+* Unit: times.
	1111	+* Range: 0 to 100
	1112	+)))
	1113	+|(% style="width:173px" %)Retry timeout|(% style="width:122px" %)HSW10069|(% colspan="2" style="width:506px" %)(((
	1114	+* Unit: s.
	1115	+* Range: 0 to 300
	1116	+)))
789	789	|(% style="width:173px" %)HMI station number|(% style="width:122px" %)HSW10070|(% colspan="2" style="width:506px" %)
790	790	|(% style="width:173px" %)PLC station number|(% style="width:122px" %)HSW10071|(% colspan="2" style="width:506px" %)
791	791	|(% colspan="1" rowspan="11" style="width:102px" %)COM1-2|(% style="width:173px" %)Communication mode|(% style="width:122px" %)HSW10094|(% colspan="2" style="width:506px" %)(((
...	...	@@ -818,10 +818,22 @@
818	818	* =1: ODD
819	819	* =2: EVEN
820	820	)))
821		-|(% style="width:173px" %)Wait timeout|(% style="width:122px" %)HSW10099|(% colspan="2" style="width:506px" %)Unit: ms. Range: 0~~30000
822		-|(% style="width:173px" %)receive timeout|(% style="width:122px" %)HSW10100|(% colspan="2" style="width:506px" %)Unit: ms. Range: 0~~30000
823		-|(% style="width:173px" %)Retry time|(% style="width:122px" %)HSW10101|(% colspan="2" style="width:506px" %)Unit: times. Range: 0~~100
824		-|(% style="width:173px" %)Retry timeout|(% style="width:122px" %)HSW10102|(% colspan="2" style="width:506px" %)Unit: s. Range: 0~~30
	1149	+|(% style="width:173px" %)Wait timeout|(% style="width:122px" %)HSW10099|(% colspan="2" style="width:506px" %)(((
	1150	+* Unit: ms.
	1151	+* Range: 0 to 30000
	1152	+)))
	1153	+|(% style="width:173px" %)receive timeout|(% style="width:122px" %)HSW10100|(% colspan="2" style="width:506px" %)(((
	1154	+* Unit: ms.
	1155	+* Range: 0 to 30000
	1156	+)))
	1157	+|(% style="width:173px" %)Retry time|(% style="width:122px" %)HSW10101|(% colspan="2" style="width:506px" %)(((
	1158	+* Unit: times.
	1159	+* Range: 0 to 100
	1160	+)))
	1161	+|(% style="width:173px" %)Retry timeout|(% style="width:122px" %)HSW10102|(% colspan="2" style="width:506px" %)(((
	1162	+* Unit: s.
	1163	+* Range: 0 to 30
	1164	+)))
825	825	|(% style="width:173px" %)HMI station number|(% style="width:122px" %)HSW10103|(% colspan="2" style="width:506px" %)
826	826	|(% style="width:173px" %)PLC station number|(% style="width:122px" %)HSW10104|(% colspan="2" style="width:506px" %)
827	827	|(% colspan="1" rowspan="11" style="width:102px" %)COM1-3|(% style="width:173px" %)Communication mode|(% style="width:122px" %)HSW10120|(% colspan="2" style="width:506px" %)(((
...	...	@@ -854,10 +854,22 @@
854	854	* =1: ODD
855	855	* =2: EVEN
856	856	)))
857		-|(% style="width:173px" %)Wait timeout|(% style="width:122px" %)HSW10125|(% colspan="2" style="width:506px" %)Unit: ms. Range: 0~~30000
858		-|(% style="width:173px" %)receive timeout|(% style="width:122px" %)HSW10126|(% colspan="2" style="width:506px" %)Unit: ms. Range: 0~~30000
859		-|(% style="width:173px" %)Retry time|(% style="width:122px" %)HSW10127|(% colspan="2" style="width:506px" %)Unit: times. Range: 0~~100
860		-|(% style="width:173px" %)Retry timeout|(% style="width:122px" %)HSW10128|(% colspan="2" style="width:506px" %)Unit: s. Range: 0~~30
	1197	+|(% style="width:173px" %)Wait timeout|(% style="width:122px" %)HSW10125|(% colspan="2" style="width:506px" %)(((
	1198	+* Unit: ms.
	1199	+* Range: 0 to 30000
	1200	+)))
	1201	+|(% style="width:173px" %)receive timeout|(% style="width:122px" %)HSW10126|(% colspan="2" style="width:506px" %)(((
	1202	+* Unit: ms.
	1203	+* Range: 0 to 30000
	1204	+)))
	1205	+|(% style="width:173px" %)Retry time|(% style="width:122px" %)HSW10127|(% colspan="2" style="width:506px" %)(((
	1206	+* Unit: times.
	1207	+* Range: 0 to 100
	1208	+)))
	1209	+|(% style="width:173px" %)Retry timeout|(% style="width:122px" %)HSW10128|(% colspan="2" style="width:506px" %)(((
	1210	+* Unit: s.
	1211	+* Range: 0 to 30
	1212	+)))
861	861	|(% style="width:173px" %)HMI station number|(% style="width:122px" %)HSW10129|(% colspan="2" style="width:506px" %)
862	862	|(% style="width:173px" %)PLC station number|(% style="width:122px" %)HSW10130|(% colspan="2" style="width:506px" %)
863	863	|(% colspan="1" rowspan="11" style="width:102px" %)COM2|(% style="width:173px" %)Communication mode|(% style="width:122px" %)HSW10072|(% colspan="2" style="width:506px" %)(((
...	...	@@ -888,10 +888,22 @@
888	888	* =1: ODD
889	889	* =2: EVEN
890	890	)))
891		-|(% style="width:173px" %)Wait timeout|(% style="width:122px" %)HSW10077|(% colspan="2" style="width:506px" %)Unit: ms. Range: 0~~30000
892		-|(% style="width:173px" %)receive timeout|(% style="width:122px" %)HSW10078|(% colspan="2" style="width:506px" %)Unit: ms. Range: 0~~30000
893		-|(% style="width:173px" %)Retry time|(% style="width:122px" %)HSW10079|(% colspan="2" style="width:506px" %)Unit: times. Range: 0~~100
894		-|(% style="width:173px" %)Retry timeout|(% style="width:122px" %)HSW10080|(% colspan="2" style="width:506px" %)Unit: s. Range: 0~~30
	1243	+|(% style="width:173px" %)Wait timeout|(% style="width:122px" %)HSW10077|(% colspan="2" style="width:506px" %)(((
	1244	+* Unit: ms.
	1245	+* Range: 0 to 30000
	1246	+)))
	1247	+|(% style="width:173px" %)receive timeout|(% style="width:122px" %)HSW10078|(% colspan="2" style="width:506px" %)(((
	1248	+* Unit: ms.
	1249	+* Range: 0 to 30000
	1250	+)))
	1251	+|(% style="width:173px" %)Retry time|(% style="width:122px" %)HSW10079|(% colspan="2" style="width:506px" %)(((
	1252	+* Unit: times.
	1253	+* Range: 0 to 100
	1254	+)))
	1255	+|(% style="width:173px" %)Retry timeout|(% style="width:122px" %)HSW10080|(% colspan="2" style="width:506px" %)(((
	1256	+* Unit: s.
	1257	+* Range: 0 to 30
	1258	+)))
895	895	|(% style="width:173px" %)HMI station number|(% style="width:122px" %)HSW10081|(% colspan="2" style="width:506px" %)
896	896	|(% style="width:173px" %)PLC station number|(% style="width:122px" %)HSW10082|(% colspan="2" style="width:506px" %)
897	897	|(% colspan="1" rowspan="11" style="width:102px" %)COM2-2|(% style="width:173px" %)Communication mode|(% style="width:122px" %)HSW10105|(% colspan="2" style="width:506px" %)(((
...	...	@@ -922,10 +922,22 @@
922	922	* =1: ODD
923	923	* =2: EVEN
924	924	)))
925		-|(% style="width:173px" %)Wait timeout|(% style="width:122px" %)HSW10110|(% colspan="2" style="width:506px" %)Unit: ms. Range: 0~~30000
926		-|(% style="width:173px" %)receive timeout|(% style="width:122px" %)HSW10111|(% colspan="2" style="width:506px" %)Unit: ms. Range: 0~~30000
927		-|(% style="width:173px" %)Retry time|(% style="width:122px" %)HSW10112|(% colspan="2" style="width:506px" %)Unit: times. Range: 0~~100
928		-|(% style="width:173px" %)Retry timeout|(% style="width:122px" %)HSW10113|(% colspan="2" style="width:506px" %)Unit: s. Range: 0~~30
	1289	+|(% style="width:173px" %)Wait timeout|(% style="width:122px" %)HSW10110|(% colspan="2" style="width:506px" %)(((
	1290	+* Unit: ms.
	1291	+* Range: 0 to 30000
	1292	+)))
	1293	+|(% style="width:173px" %)receive timeout|(% style="width:122px" %)HSW10111|(% colspan="2" style="width:506px" %)(((
	1294	+* Unit: ms.
	1295	+* Range: 0 to 30000
	1296	+)))
	1297	+|(% style="width:173px" %)Retry time|(% style="width:122px" %)HSW10112|(% colspan="2" style="width:506px" %)(((
	1298	+* Unit: times.
	1299	+* Range: 0 to 100
	1300	+)))
	1301	+|(% style="width:173px" %)Retry timeout|(% style="width:122px" %)HSW10113|(% colspan="2" style="width:506px" %)(((
	1302	+* Unit: s.
	1303	+* Range: 0 to 30
	1304	+)))
929	929	|(% style="width:173px" %)HMI station number|(% style="width:122px" %)HSW10114|(% colspan="2" style="width:506px" %)
930	930	|(% style="width:173px" %)PLC station number|(% style="width:122px" %)HSW10115|(% colspan="2" style="width:506px" %)
931	931	|(% colspan="1" rowspan="11" style="width:102px" %)COM3|(% style="width:173px" %)Communication mode|(% style="width:122px" %)HSW10083|(% colspan="2" style="width:506px" %)(((
...	...	@@ -955,29 +955,48 @@
955	955	* =1: ODD
956	956	* =2: EVEN
957	957	)))
958		-|(% style="width:173px" %)Wait timeout|(% style="width:122px" %)HSW10088|(% colspan="2" style="width:506px" %)Unit: ms. Range: 0~~30000
959		-|(% style="width:173px" %)receive timeout|(% style="width:122px" %)HSW10089|(% colspan="2" style="width:506px" %)Unit: ms. Range: 0~~30000
960		-|(% style="width:173px" %)Retry time|(% style="width:122px" %)HSW10090|(% colspan="2" style="width:506px" %)Unit: times. Range: 0~~100
961		-|(% style="width:173px" %)Retry timeout|(% style="width:122px" %)HSW10091|(% colspan="2" style="width:506px" %)Unit: s. Range: 0~~30
	1334	+|(% style="width:173px" %)Wait timeout|(% style="width:122px" %)HSW10088|(% colspan="2" style="width:506px" %)(((
	1335	+* Unit: ms.
	1336	+* Range: 0 to 30000
	1337	+)))
	1338	+|(% style="width:173px" %)receive timeout|(% style="width:122px" %)HSW10089|(% colspan="2" style="width:506px" %)(((
	1339	+* Unit: ms.
	1340	+* Range: 0 to 30000
	1341	+)))
	1342	+|(% style="width:173px" %)Retry time|(% style="width:122px" %)HSW10090|(% colspan="2" style="width:506px" %)(((
	1343	+* Unit: times.
	1344	+* Range: 0 to 100
	1345	+)))
	1346	+|(% style="width:173px" %)Retry timeout|(% style="width:122px" %)HSW10091|(% colspan="2" style="width:506px" %)(((
	1347	+* Unit: s.
	1348	+* Range: 0 to 30
	1349	+)))
962	962	|(% style="width:173px" %)HMI station number|(% style="width:122px" %)HSW10092|(% colspan="2" style="width:506px" %)
963	963	|(% style="width:173px" %)PLC station number|(% style="width:122px" %)HSW10093|(% colspan="2" style="width:506px" %)
964	964	|(% colspan="1" rowspan="2" style="width:102px" %)CAN port|(% style="width:173px" %)CAN1 baud rate|(% style="width:122px" %)HSW010116|(% style="width:299px" %)(((
965		-Unit: K, the baud rate must be an integer, for example, when the baud rate required is 250000, just enter 250.
	1353	+Unit: K, the baud rate must be an integer.
	1354	+
	1355	+For example, when the baud rate required is 250000, just enter 250.
966	966	)))|(% colspan="1" rowspan="2" style="width:218px" %)**✎Note: **If baud rate has been modified,please wait 5 seconds,then restart the HMI to take effect.
967		-|(% style="width:173px" %)CAN2 baud rate|(% style="width:122px" %)HSW010117|(% style="width:299px" %)Unit: K, the baud rate must be an integer, for example, when the baud rate required is 250000, just enter 250.
	1357	+|(% style="width:173px" %)CAN2 baud rate|(% style="width:122px" %)HSW010117|(% style="width:299px" %)(((
	1358	+Unit: K, the baud rate must be an integer.
968	968
969		-== **Ethernet communication configuration** ==
	1360	+For example, when the baud rate required is 250000, just enter 250.
	1361	+)))
970	970
	1363	+== Ethernet communication configuration ==
	1364	+
971	971	(% class="table-bordered" %)
972		-|=(% style="width: 40px;" %)**No.**|=(% style="width: 295px;" %)**Function**|=(% style="width: 220px;" %)**Address**|=(% style="width: 336px;" %)**Description**
	1366	+|(% style="width:40px" %)**No.**|(% style="width:295px" %)**Function**|(% style="width:220px" %)**Address**|(% style="width:336px" %)**Description**
973	973	|(% rowspan="7" style="width:40px" %)1|(% colspan="1" rowspan="7" style="width:295px" %)Ethernet parameter configuration for communication number 1 in list. Configure those addresses according to connected device. After configuration, wait for 5 seconds and restart the HMI.|(% style="width:220px" %)HSW11004|(% style="width:336px" %)Device IP address high word 1
974	974	|(% style="width:220px" %)HSW11005|(% style="width:336px" %)Device IP address high word 2
975	975	|(% style="width:220px" %)HSW11006|(% style="width:336px" %)Device IP address high word 3
976	976	|(% style="width:220px" %)HSW11007|(% style="width:336px" %)Device IP address high word 4
977	977	|(% style="width:220px" %)HSW11008|(% style="width:336px" %)Device Port number
978		-|(% style="width:220px" %)HSW11009|=(% style="width: 336px;" %)(((
979		-* =2 TCP
980		-* =3 UDP
	1372	+|(% style="width:220px" %)HSW11009|(% style="width:336px" %)(((
	1373	+~=2 TCP
	1374	+
	1375	+~=3 UDP
981	981	)))
982	982	|(% style="width:220px" %)HSW11010|(% style="width:336px" %)Reserved
983	983	|(% rowspan="7" style="width:40px" %)2|(% colspan="1" rowspan="7" style="width:295px" %)Ethernet parameter configuration for communication number 2 in list. Configure those addresses according to connected device. After configuration, wait for 5 seconds and restart the HMI.|(% style="width:220px" %)HSW11011|(% style="width:336px" %)Device IP address high word 1
...	...	@@ -985,9 +985,10 @@
985	985	|(% style="width:220px" %)HSW11013|(% style="width:336px" %)Device IP address high word 3
986	986	|(% style="width:220px" %)HSW11014|(% style="width:336px" %)Device IP address high word 4
987	987	|(% style="width:220px" %)HSW11015|(% style="width:336px" %)Device Port number
988		-|(% style="width:220px" %)HSW11016|=(% style="width: 336px;" %)(((
989		-* =2 TCP
990		-* =3 UDP
	1383	+|(% style="width:220px" %)HSW11016|(% style="width:336px" %)(((
	1384	+~=2 TCP
	1385	+
	1386	+~=3 UDP
991	991	)))
992	992	|(% style="width:220px" %)HSW11017|(% style="width:336px" %)Reserved
993	993	|(% style="width:40px" %)…|(% style="width:295px" %) |(% style="width:220px" %)…|(% style="width:336px" %)…
...	...	@@ -996,16 +996,22 @@
996	996	|(% style="width:220px" %)HSW11223|(% style="width:336px" %)Device IP address high word 3
997	997	|(% style="width:220px" %)HSW11224|(% style="width:336px" %)Device IP address high word 4
998	998	|(% style="width:220px" %)HSW11225|(% style="width:336px" %)Device Port number
999		-|(% style="width:220px" %)HSW11226|=(% style="width: 336px;" %)2 TCP; =3 UDP
	1395	+|(% style="width:220px" %)HSW11226|(% style="width:336px" %)(((
	1396	+~=2 TCP;
	1397	+
	1398	+~=3 UDP
	1399	+)))
1000	1000	|(% style="width:220px" %)HSW11227|(% style="width:336px" %)Reserved
1001	1001
1002		-(% class="wikigeneratedid" %)
	1402	+(% class="box infomessage" %)
	1403	+(((
1003	1003	**✎Note:** The number of Ethernet connections supported by different HMI series varies.
	1405	+)))
1004	1004
1005		-== **Communication control** ==
	1407	+== Communication control ==
1006	1006
1007	1007	(% class="table-bordered" %)
1008		-|(% style="width:135px" %)**Communication No.**|(% style="width:102px" %)**Station No.**|(% style="width:185px" %)**Control bit**|(% style="width:191px" %)**Communication lamp**|(% style="width:271px" %)**Description**
	1410	+|=(% style="width: 135px;" %)**Communication No.**|=(% style="width: 102px;" %)**Station No.**|=(% style="width: 185px;" %)**Control bit**|=(% style="width: 191px;" %)**Communication lamp**|=(% style="width: 271px;" %)**Description**
1009	1009	|(% colspan="1" rowspan="16" style="width:135px" %)1|(% style="width:102px" %)0~~15|(% style="width:185px" %)HSX550.0～HSX550.15|(% style="width:191px" %)HSX558.0～HSX558.15|(% rowspan="160" style="width:271px" %)Communication number refers to the number in "Communication Port Configuration". A number provides 256 device station numbers. Each station number corresponds to a communication control bit and a communication indicator bit. Registers HSX550.0 to HSX805.15 are used to control the station numbers from 0 to 127, and registers HSX1150.0 to HSX1405.15 are used to control station numbers 128 to 255.
1010	1010	|(% style="width:102px" %)16~~31|(% style="width:185px" %)HSX551.0～HSX551.15|(% style="width:191px" %)HSX559.0～HSX559.15
1011	1011	|(% style="width:102px" %)32~~47|(% style="width:185px" %)HSX552.0～HSX552.15|(% style="width:191px" %)HSX560.0～HSX560.15

6.png

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.Mora

Size

...	...	@@ -1,0 +1,1 @@
	1	+20.1 KB

Content