Changes for page 13 HMI Internal Registers

Summary

• Page properties (3 modified, 0 added, 0 removed)
• Attachments (0 modified, 0 added, 1 removed)
  • 6.png

Details

Page properties

Title

...	...	@@ -1,1 +1,1 @@
1		-13.HMI Internal Registers
	1	+12 HMI internal registers

Author

...	...	@@ -1,1 +1,1 @@
1		-XWiki.Mora
	1	+XWiki.Stone

Content

...	...	@@ -4,11 +4,11 @@
4	4
5	5	*HSW, HDW, HUW, HAW are word address, HSX, HDX, HUX, HAX are bit address.
6	6
7		-* **System data area (HSW): **A special register defined by the system.
8		-* **Data storage area (HDW/HDX): **Users store user data.
9		-* **System data area (HUW): **A special register defined by the system.
10		-* **System Data (HAW)**: System register used for power-off save.
11		-* **Recipe index area (RPW): **System register used for recipe index.
	7	+1. **System data area (HSW): **A special register defined by the system.
	8	+1. **Data storage area (HDW/HDX): **Users store user data.
	9	+1. **System data area (HUW): **A special register defined by the system.
	10	+1. **System Data (HAW)**: System register used for power-off save.
	11	+1. **Recipe index area (RPW): **System register used for recipe index.
12	12
13	13	HMI internal registers are divided into bit address and word address, which can be accessed in two ways (take HDW as an example).
14	14
...	...	@@ -25,11 +25,6 @@
25	25	* The address of the bit address HDX is with a decimal point while word addresses are integers.
26	26	)))
27	27
28		-= Address ranges table =
29		-
30		-(% style="text-align:center" %)
31		-[[image:6.png]]
32		-
33	33	= **Data storage area (HDW/HDX)** =
34	34
35	35	It is used to save the temporary data of project.
...	...	@@ -65,8 +65,8 @@
65	65
66	66	It is used for system special registers (reserved by system).
67	67
68		-1. Access as word, and serial number range is from HUW0 to HUW1599.
69		-1. Access as bit, and serial number range is from HUX0.0 to HUX1599.15.
	63	+1. Access as word, and serial number range is from HUW0 to HUW199999.
	64	+1. Access as bit, and serial number range is from HUX0.0 to HUX199999.15.
70	70
71	71	**✎Note:**
72	72
...	...	@@ -155,7 +155,7 @@
155	155	)))
156	156	|=(% style="width: 160px;" %)HSW6~~HSW7|(% style="width:282px" %)Number of alarms|(% style="width:452px" %)The number of alarm (it also includes the records of alarm confirmed)
157	157	|=(% style="width: 160px;" %)HSW8|(% style="width:282px" %)Number of unconfirmed history alarm|(% style="width:452px" %)The number of unconfirmed history alarm
158		-|=(% style="width: 160px;" %)HSW9|(% style="width:282px" %)Time out prompt|(% style="width:452px" %)(((
	153	+|=(% style="width: 160px;" %)HSW9|(% style="width:282px" %)Time out tip|(% style="width:452px" %)(((
159	159	* =0: Enable
160	160	* =1: Disable
161	161	)))
...	...	@@ -246,8 +246,8 @@
246	246	* =2: HSX521.1=1, delete all trend graph.
247	247	* =4: HSX521.2=1, delete all alarms.
248	248	* =16: HSX521.4=1, delete history XY plot.
249		-* =32: HSX521.5=1, delete data records in SD card or USB flash disk;(Please make a setting which is saved to USB flash disk or SD card in project setting).
250		-* =64: HSX521.6=1, delete alarms records in SD card or USB flash disk; (Please make a setting which is saved to USB flash disk or SD card in project setting).
	244	+* =32: HSX521.5=1, delete data records in SD card or flash dish;(Please make a setting which is saved to flash disk or SD card in project setting).
	245	+* =64: HSX521.6=1, delete alarms records in SD card or flash dish; (Please make a setting which is saved to flash disk or SD card in project setting).
251	251	)))
252	252	|=(% style="width: 160px;" %)HSW522|(% style="width:282px" %)Copy and paste the alarm/data files in flash to the USB flash disk|(% style="width:452px" %)(((
253	253	* =0: No operation
...	...	@@ -455,7 +455,7 @@
455	455	Address mapping polling cycle, effective range: 40~~1000ms, default: 300ms.
456	456
457	457	* When the set value is greater than 1000, the value is 1000.
458		-* When the set value is lower than 40, it changes to the default value 300
	453	+* When the set value is greater than 1000, it changes to the default value 300
459	459	)))
460	460	|=(% style="width: 160px;" %)HSW1087|(% style="width:282px" %)Control write interval in address mapping|(% style="width:452px" %)(((
461	461	After reading data to the device for N times, Perform an address mapping write operation. N is the interval value. The effective range: 0~~5, and default is 2.
...	...	@@ -490,8 +490,6 @@
490	490	* =0, Default value
491	491	* =1, Release the alarm generated before the last power-down when starting up
492	492	)))
493		-|=(% style="width: 160px;" %)HSW1200|(% colspan="1" rowspan="2" style="width:282px" %)TSAP settings for HMI in the Siemens LOGO! 8 protocol(ig series or HMI V2.0)|(% style="width:452px" %)HMI local TSAP, which corresponds to the remote TSAP of PLC
494		-|=(% style="width: 160px;" %)HSW1201|(% style="width:452px" %)HMI remote TSAP, which corresponds to the local TSAP of PLC
495	495	|=(% style="width: 160px;" %)HSW1450|(% style="width:282px" %)Enable objects level password function|(% style="width:452px" %)(((
496	496	* =0, Disable
497	497	* =1, Enable
...	...	@@ -598,9 +598,6 @@
598	598	* =0: Server connection exception
599	599	* =1: Server connection is OK
600	600	)))
601		-|=(% style="width: 160px;" %)HSW1740|(% style="width:282px" %)Wi-fi signal strength|(% style="width:452px" %)(((
602		-Display the value of Wi-fi signal signal strength, ranges from 0~~100 (Signal strength is automatically obtained only once when HMI is powered on, and it will not be automatically updated. It needs to be used with the HSW1890)
603		-)))
604	604	|=(% style="width: 160px;" %)HSW1741|(% colspan="1" rowspan="12" style="width:282px" %)Related IP register in 4Gnetwork status (It is valid when HMI is connected to 4G)|(% style="width:452px" %)Local IP address high byte 1
605	605	|=(% style="width: 160px;" %)HSW1742|(% style="width:452px" %)Local IP address high byte 2
606	606	|=(% style="width: 160px;" %)HSW1743|(% style="width:452px" %)Local IP address high byte 3
...	...	@@ -628,180 +628,10 @@
628	628	* =1: Server connection is OK
629	629	)))
630	630	|=(% style="width: 160px;" %)HSW1761|(% style="width:282px" %)Display 4G network signal strength|(% style="width:452px" %)Signal strength: 0~~31. The greater the value ,the signal is stronger
631		-|=(% style="width: 160px;" %)(((
632		-HSW1762
633		-)))|(% colspan="1" rowspan="13" style="width:282px" %)(((
634		-Note: Valid when Ethernet2 of HMI is plugged into the network cable.
635		-①、When the Ethernet setting is enabled in the project parameters, this register displays the set value.
636		-②. When the Ethernet setting is not enabled in the engineering parameters, the register displays the Ethernet IP automatically acquired by the HMI.
637		-③. When the HMI is not plugged into the network cable, the register will show 0 whether the engineering parameters are set or not.
638		-④.IP related registers can be read and written (only static IP mode can be written).
639		-)))|(% style="width:452px" %)(((
640		-Ethernet2 Local IP address high byte 1
641		-)))
642		-|=(% style="width: 160px;" %)(((
643		-HSW1763
644		-)))|(% style="width:452px" %)(((
645		-Ethernet2 Local IP address high byte 2
646		-)))
647		-|=(% style="width: 160px;" %)(((
648		-HSW1764
649		-)))|(% style="width:452px" %)(((
650		-Ethernet2 Local IP address high byte 3
651		-)))
652		-|=(% style="width: 160px;" %)(((
653		-HSW1765
654		-)))|(% style="width:452px" %)(((
655		-Ethernet2 Local IP address high byte 4
656		-)))
657		-|=(% style="width: 160px;" %)(((
658		-HSW1766
659		-)))|(% style="width:452px" %)(((
660		-Ethernet2 Local mask IP address high byte 1
661		-)))
662		-|=(% style="width: 160px;" %)(((
663		-HSW1767
664		-)))|(% style="width:452px" %)(((
665		-Ethernet2 Local mask IP address high byte 2
666		-)))
667		-|=(% style="width: 160px;" %)(((
668		-HSW1768
669		-)))|(% style="width:452px" %)Ethernet2 Local mask IP address high byte 3
670		-|=(% style="width: 160px;" %)HSW1769|(% style="width:452px" %)Ethernet2 Local mask IP address high byte 4
671		-|=(% style="width: 160px;" %)(((
672		-HSW1770
673		-)))|(% style="width:452px" %)(((
674		-Ethernet2 Local gateway IP address high byte 1
675		-)))
676		-|=(% style="width: 160px;" %)(((
677		-HSW1771
678		-)))|(% style="width:452px" %)(((
679		-Ethernet2 Local gateway IP address high byte 2
680		-)))
681		-|=(% style="width: 160px;" %)(((
682		-HSW1772
683		-)))|(% style="width:452px" %)(((
684		-Ethernet2 Local gateway IP address high byte 3
685		-)))
686		-|=(% style="width: 160px;" %)(((
687		-HSW1773
688		-)))|(% style="width:452px" %)(((
689		-Ethernet2 Local gateway IP address high byte 4
690		-)))
691		-|=(% style="width: 160px;" %)(((
692		-HSW1774
693		-)))|(% style="width:452px" %)(((
694		-Ethernet2 Local Port Address
695		-)))
696		-|=(% style="width: 160px;" %)(((
697		-HSW1775
698		-)))|(% colspan="1" rowspan="6" style="width:282px" %)(((
699		-①Display the MAC code of Ethernet2 NIC
700		-
701		-(hexadecimal display)
702		-
703		-②Read-only mode, not modifiable
704		-)))|(% style="width:452px" %)(((
705		-Ethernet2 Local MAC code high byte 1
706		-)))
707		-|=(% style="width: 160px;" %)(((
708		-HSW1776
709		-)))|(% style="width:452px" %)(((
710		-Ethernet2 Local MAC code high byte 2
711		-)))
712		-|=(% style="width: 160px;" %)(((
713		-HSW1777
714		-)))|(% style="width:452px" %)(((
715		-Ethernet2 Local MAC code high byte 3
716		-)))
717		-|=(% style="width: 160px;" %)(((
718		-HSW1778
719		-)))|(% style="width:452px" %)(((
720		-Ethernet2 Local MAC code high byte 4
721		-)))
722		-|=(% style="width: 160px;" %)(((
723		-HSW1779
724		-)))|(% style="width:452px" %)(((
725		-Ethernet2 Local MAC code high byte 5
726		-)))
727		-|=(% style="width: 160px;" %)(((
728		-HSW1780
729		-)))|(% style="width:452px" %)(((
730		-Ethernet2 Local MAC code high byte 6
731		-)))
732		-|=(% style="width: 160px;" %)(((
733		-HSW1781
734		-)))|(% colspan="1" rowspan="8" style="width:282px" %)(((
735		-①Display and modify DNS1 and DNS2 of Ethernet2
736		-
737		-②Related registers can be read and written mode (only static IP mode can be written)
738		-)))|(% style="width:452px" %)(((
739		-Ethernet2 Local DNS1 address high byte 1
740		-)))
741		-|=(% style="width: 160px;" %)(((
742		-HSW1782
743		-)))|(% style="width:452px" %)(((
744		-Ethernet2 Local DNS1 address high byte 2
745		-)))
746		-|=(% style="width: 160px;" %)(((
747		-HSW1783
748		-)))|(% style="width:452px" %)(((
749		-Ethernet2 Local DNS1 address high byte 3
750		-)))
751		-|=(% style="width: 160px;" %)(((
752		-HSW1784
753		-)))|(% style="width:452px" %)(((
754		-Ethernet2 Local DNS1 address high byte 4
755		-)))
756		-|=(% style="width: 160px;" %)(((
757		-HSW1785
758		-)))|(% style="width:452px" %)(((
759		-Ethernet2 Local DNS2 address high byte 1
760		-)))
761		-|=(% style="width: 160px;" %)(((
762		-HSW1786
763		-)))|(% style="width:452px" %)(((
764		-Ethernet2 Local DNS2 address high byte 2
765		-)))
766		-|=(% style="width: 160px;" %)(((
767		-HSW1787
768		-)))|(% style="width:452px" %)(((
769		-Ethernet2 Local DNS2 address high byte 3
770		-)))
771		-|=(% style="width: 160px;" %)(((
772		-HSW1788
773		-)))|(% style="width:452px" %)(((
774		-Ethernet2 Local DNS2 address high byte 4
775		-)))
776		-|=(% style="width: 160px;" %)(((
777		-HSW1789
778		-)))|(% colspan="1" style="width:282px" %)(((
779		-Display or set the dynamic or static IP mode of Ethernet2
780		-)))|(% style="width:452px" %)(((
781		-HSX1789.0 = 0, Static IP mode
782		-
783		-HSX1789.0 = 1, dynamic IP mode
784		-)))
785		-|=(% style="width: 160px;" %)(((
786		-HSW1790
787		-)))|(% colspan="1" style="width:282px" %)(((
788		-Confirm Ethernet2 IP, subnet mask, gateway, DNS1, DNS2, and dynamic static IP settings
789		-)))|(% style="width:452px" %)(((
790		-~= 1, confirm the setting (i.e., after modifying IP-related information, set this address to 1, representing confirmation of the modification, after which it will be reset to 0)
791		-)))
792		-|=(% style="width: 160px;" %)(((
793		-HSW1791
794		-)))|(% colspan="1" style="width:282px" %)(((
795		-Network status of the Ethernet2 connection server
796		-)))|(% style="width:452px" %)(((
797		-~= 0, connection to the server is abnormal = 1, connection to the server is normal
798		-)))
799	799	|=(% style="width: 160px;" %)HSW1852|(% style="width:282px" %)Control the interval in two consecutive clicks|(% style="width:452px" %)Limit range: 1~~500ms. The default is 100 ms.
800	800	|=(% style="width: 160px;" %)HSW1853|(% style="width:282px" %)File format for exporting data records to USB flash drive or SD card|(% style="width:452px" %)(((
801	801	* =0: db database
802	802	* =1: CSV
803		-
804		-(Only valid for script function DbToCsvFile)
805	805	)))
806	806	|=(% style="width: 160px;" %)HSW1854|(% style="width:282px" %)High and low word conversion type|(% style="width:452px" %)(((
807	807	* =0: use the old high-low word conversion (default)
...	...	@@ -823,96 +823,30 @@
823	823	* =1: download firmware
824	824	* =2: enter the background
825	825	)))
826		-|=(% style="width: 160px;" %)HSW1865|(% style="width:282px" %)Priority connection to the cloud|(% style="width:452px" %)(((
827		-* =0: priority Ethernet
828		-* =1: priority WLAN
829		-* =2: priority 4G
	646	+|=(% style="width: 160px;" %)HSW1866|(% style="width:282px" %)Delete the LUa extension module file|(% style="width:452px" %)(((
	647	+* =1, delete;
	648	+* = Others, do not delete
830	830	)))
831		-|=(% style="width: 160px;" %)HSW1866|(% style="width:282px" %)Delete the Lua extension module file|(% style="width:452px" %)(((
832		-* =0: delete;
833		-* = Others: do not delete
834		-)))
835	835	|=(% style="width: 160px;" %)HSW1867|(% style="width:282px" %)Reset mode|(% style="width:452px" %)(((
836	836	Monitor address is set during reset of reset switch, whether to cancel reset,
837	837
838		-* = 0: yes (default);
839		-* = 1: no
	653	+* = 0, yes (default);
	654	+* = 1, no
840	840	)))
841	841	|=(% style="width: 160px;" %)HSW1868|(% style="width:282px" %)Double-click or long press the record type table mode|(% style="width:452px" %)(((
842	842	Controls whether the button pops up when double-clicking or long pressing on record type table object
843	843
844		-* = 0: yes (default);
845		-* = 1: no
	659	+* = 0, yes (default);
	660	+* = 1, no
846	846	)))
847		-|=(% style="width: 160px;" %)(((
848		-HSW1869
849		-)))|(% style="width:282px" %)(((
850		-Dynamic screensaver countdown
851		-)))|(% style="width:452px" %)(((
852		-Countdown to enter dynamic screensaver effect, unit (S)
853		-)))
854		-|=(% style="width: 160px;" %)(((
855		-HSW1870
856		-)))|(% style="width:282px" %)(((
857		-Display or set the dynamic or static IP mode of Ethernet1
858		-)))|(% style="width:452px" %)(((
859		-HSX1870.0 = 0, Static IP mode
860		-
861		-HSX1870.0 = 1, dynamic IP mode
862		-)))
863		-|=(% style="width: 160px;" %)(((
864		-HSW1871
865		-)))|(% style="width:282px" %)(((
866		-Confirm the IP, subnet mask, gateway, DNS1, DNS2, and dynamic static IP settings for Ethernet1
867		-)))|(% style="width:452px" %)(((
868		-~= 1, confirm the setting (i.e., after modifying IP-related information, set this address to 1, representing confirmation of the modification, after which it will be reset to 0)
869		-)))
870		-|=(% style="width: 160px;" %)(((
871		-HSW1872
872		-)))|(% colspan="1" rowspan="8" style="width:282px" %)(((
873		-①Display and modify DNS1 and DNS2 of Ethernet1
874		-
875		-②Related registers can be read and written mode (only static IP mode can be written)
876		-)))|(% style="width:452px" %)(((
877		-Ethernet1 Local DNS1 address high byte 1
878		-)))
879		-|=(% style="width: 160px;" %)(((
880		-HSW1873
881		-)))|(% style="width:452px" %)Ethernet1 Local DNS1 address high byte 2
882		-|=(% style="width: 160px;" %)(((
883		-HSW1874
884		-)))|(% style="width:452px" %)Ethernet1 Local DNS1 address high byte 3
885		-|=(% style="width: 160px;" %)(((
886		-HSW1875
887		-)))|(% style="width:452px" %)Ethernet1 Local DNS1 address high byte 4
888		-|=(% style="width: 160px;" %)(((
889		-HSW1876
890		-)))|(% style="width:452px" %)Ethernet1 Local DNS2 address high byte 1
891		-|=(% style="width: 160px;" %)(((
892		-HSW1877
893		-)))|(% style="width:452px" %)Ethernet1 Local DNS2 address high byte 2
894		-|=(% style="width: 160px;" %)(((
895		-HSW1878
896		-)))|(% style="width:452px" %)Ethernet1 Local DNS2 address high byte 3
897		-|=(% style="width: 160px;" %)(((
898		-HSW1879
899		-)))|(% style="width:452px" %)Ethernet1 Local DNS2 address high byte 4
900		-|=(% style="width: 160px;" %)HSW1890|(% colspan="1" style="width:282px" %)Enable refresh current network signal|(% style="width:452px" %)(((
901		-* =1: Refresh the network signal once after triggered (This register will be automatically reset after triggered, only update the signal value once after per 15 seconds, not able to update twice in the short interval)
902		-* =Others: not refresh
903		-)))
904		-|=(% style="width: 160px;" %)HSW1891|(% colspan="1" style="width:282px" %)Enable clear cache for screen data  |(% style="width:452px" %)(((
905		-* =1, not clear screen cache when switch language
906		-* =2, trigger clear cache of all screens for once time
907		-* =3, always clear cache of all screen data
908		-)))
909	909	|=(% style="width: 160px;" %)HSW10000~~19999|(% style="width:282px" %)Power-down storage area|(% style="width:452px" %)After restart, the data remains
910	910	|=(% style="width: 160px;" %)HSW10035|(% rowspan="13" style="width:282px" %)(((
911		-Note: Valid when Ethernet1 of HMI is plugged into the network cable.
912		-① When the Ethernet setting is enabled in the project parameters, this register displays the set value.
913		-② When the Ethernet setting is not enabled in the engineering parameters, the register displays the Ethernet IP automatically acquired by the HMI.
914		-③ When the HMI is not plugged into the network cable, the register will show 0 whether the engineering parameters are set or not.
915		-④ IP related registers can be read and written (only static IP mode can be written).
	664	+**✎Note: **Only valid when the HMI is plugged into the Ethernet cable.
	665	+
	666	+1. If Ethernet settings is enabled in project parameters, this register displays the set value.
	667	+1. If Ethernet settings is not enabled in project parameters, IP would automatically obtained IP.
	668	+1. If HMI is not connected to the network, the register is displayed as 0 whether the engineering parameters are set.
	669	+1. 4. All IP registers of HMI are read-only.
916	916	)))|(% style="width:452px" %)Local IP address high byte 1
917	917	|=(% style="width: 160px;" %)HSW10036|(% style="width:452px" %)Local IP address high byte 2
918	918	|=(% style="width: 160px;" %)HSW10037|(% style="width:452px" %)Local IP address high byte 3
...	...	@@ -927,11 +927,9 @@
927	927	|=(% style="width: 160px;" %)HSW10046|(% style="width:452px" %)Local gateway address high byte 4
928	928	|=(% style="width: 160px;" %)HSW10047|(% style="width:452px" %)Local port address
929	929	|=(% style="width: 160px;" %)HSW10048|(% rowspan="6" style="width:282px" %)(((
930		-①Display the MAC code of Ethernet1 NIC
	684	+Displays the MAC code of the current network card
931	931
932		-(hexadecimal display)
933		-
934		-②Read-only mode, not modifiable
	686	+(Hexadecimal display)
935	935	)))|(% style="width:452px" %)Local MAC code high word 1
936	936	|=(% style="width: 160px;" %)HSW10049|(% style="width:452px" %)Local MAC code high word 2
937	937	|=(% style="width: 160px;" %)HSW10050|(% style="width:452px" %)Local MAC code high word 3
...	...	@@ -938,7 +938,7 @@
938	938	|=(% style="width: 160px;" %)HSW10051|(% style="width:452px" %)Local MAC code high word 4
939	939	|=(% style="width: 160px;" %)HSW10052|(% style="width:452px" %)Local MAC code high word 5
940	940	|=(% style="width: 160px;" %)HSW10053|(% style="width:452px" %)Local MAC code high word 6
941		-|=(% style="width: 160px;" %)HSW10118|(% colspan="1" rowspan="2" style="width:282px" %)TSAP settings for HMI in the Siemens LOGO! 8 protocol|(% style="width:452px" %)HMI local TSAP, which corresponds to the remote TSAP of PLC
	693	+|=(% style="width: 160px;" %)HSW10118|(% colspan="1" rowspan="2" style="width:282px" %)TSAP settings for HMI in the Siemens logo! 8 protocol|(% style="width:452px" %)HMI local TSAP, which corresponds to the remote TSAP of PLC
942	942	|=(% style="width: 160px;" %)HSW10119|(% style="width:452px" %)HMI remote TSAP, which corresponds to the local TSAP of PLC
943	943	|=(% style="width: 160px;" %)HSW10461~~10493|(% style="width:282px" %)Remote access password|(% style="width:452px" %)8-character remote access password
944	944	|=(% style="width: 160px;" %)HSW10494~~10558|(% style="width:282px" %)Machine ID (Read only)|(% style="width:452px" %)Machine ID for remote access (read only 64-bit)
...	...	@@ -1020,36 +1020,9 @@
1020	1020	)))
1021	1021	|=(% style="width: 160px;" %)HSW11760|(% style="width:282px" %)Screensaver countdown|(% style="width:452px" %)Display the countdown to enter the Screensaver, unit: second.
1022	1022	|=(% style="width: 160px;" %)HSW11761|(% style="width:282px" %)Screensaver screen number|(% style="width:452px" %)Set the screen number for Screensaver
1023		-|=(% style="width: 160px;" %)(((
1024		-HSW11762
1025		-)))|(% style="width:282px" %)(((
1026		-Dynamic screensaver control address
1027		-)))|(% style="width:452px" %)(((
1028		-HSX11762.0=0, initialize with project configuration;
1029	1029
1030		-HSX11762.0=1, initialize with special register configuration;
	776	+== **Serial port communication configuration** ==
1031	1031
1032		-HSX11762.1=0, disable dynamic screensaver;
1033		-
1034		-HSX11762.1=1, enable dynamic screensaver
1035		-)))
1036		-|=(% style="width: 160px;" %)(((
1037		-HSW11763
1038		-)))|(% style="width:282px" %)(((
1039		-Waiting time to enter the dynamic screensaver
1040		-)))|(% style="width:452px" %)(((
1041		-Waiting time when the screen is not operated, range 1~~720 minutes
1042		-)))
1043		-|=(% style="width: 160px;" %)(((
1044		-HSW11764
1045		-)))|(% style="width:282px" %)(((
1046		-Animated screensaver animation type
1047		-)))|(% style="width:452px" %)(((
1048		-~=0: Raster,=1: Blinds,=2: Bubble
1049		-)))
1050		-
1051		-== Serial port communication configuration ==
1052		-
1053	1053	(% class="table-bordered" %)
1054	1054	|=(% scope="row" style="width: 102px;" %)Port|=(% style="width: 173px;" %)**Function**|=(% style="width: 122px;" %)**Address**|=(% colspan="2" style="width: 506px;" %)**Description**
1055	1055	|(% colspan="1" rowspan="11" style="width:102px" %)COM1|(% style="width:173px" %)Communication mode|(% style="width:122px" %)HSW10061|(% colspan="2" style="width:506px" %)(((
...	...	@@ -1081,22 +1081,10 @@
1081	1081	* =1: ODD
1082	1082	* =2: EVEN
1083	1083	)))
1084		-|(% style="width:173px" %)Wait timeout|(% style="width:122px" %)HSW10066|(% colspan="2" style="width:506px" %)(((
1085		-* Unit: ms.
1086		-* Range: 0 to 30000
1087		-)))
1088		-|(% style="width:173px" %)reveive timeout|(% style="width:122px" %)HSW10067|(% colspan="2" style="width:506px" %)(((
1089		-* Unit: ms.
1090		-* Range: 0 to 30000
1091		-)))
1092		-|(% style="width:173px" %)Retry time|(% style="width:122px" %)HSW10068|(% colspan="2" style="width:506px" %)(((
1093		-* Unit: times.
1094		-* Range: 0 to 100
1095		-)))
1096		-|(% style="width:173px" %)Retry timeout|(% style="width:122px" %)HSW10069|(% colspan="2" style="width:506px" %)(((
1097		-* Unit: s.
1098		-* Range: 0 to 300
1099		-)))
	809	+|(% style="width:173px" %)Wait timeout|(% style="width:122px" %)HSW10066|(% colspan="2" style="width:506px" %)Unit: ms. Range: 0~~30000
	810	+|(% style="width:173px" %)reveive timeout|(% style="width:122px" %)HSW10067|(% colspan="2" style="width:506px" %)Unit: ms. Range: 0~~30000
	811	+|(% style="width:173px" %)Retry time|(% style="width:122px" %)HSW10068|(% colspan="2" style="width:506px" %)Unit: times. Range: 0~~100
	812	+|(% style="width:173px" %)Retry timeout|(% style="width:122px" %)HSW10069|(% colspan="2" style="width:506px" %)Unit: s. Range: 0~~300
1100	1100	|(% style="width:173px" %)HMI station number|(% style="width:122px" %)HSW10070|(% colspan="2" style="width:506px" %)
1101	1101	|(% style="width:173px" %)PLC station number|(% style="width:122px" %)HSW10071|(% colspan="2" style="width:506px" %)
1102	1102	|(% colspan="1" rowspan="11" style="width:102px" %)COM1-2|(% style="width:173px" %)Communication mode|(% style="width:122px" %)HSW10094|(% colspan="2" style="width:506px" %)(((
...	...	@@ -1129,22 +1129,10 @@
1129	1129	* =1: ODD
1130	1130	* =2: EVEN
1131	1131	)))
1132		-|(% style="width:173px" %)Wait timeout|(% style="width:122px" %)HSW10099|(% colspan="2" style="width:506px" %)(((
1133		-* Unit: ms.
1134		-* Range: 0 to 30000
1135		-)))
1136		-|(% style="width:173px" %)receive timeout|(% style="width:122px" %)HSW10100|(% colspan="2" style="width:506px" %)(((
1137		-* Unit: ms.
1138		-* Range: 0 to 30000
1139		-)))
1140		-|(% style="width:173px" %)Retry time|(% style="width:122px" %)HSW10101|(% colspan="2" style="width:506px" %)(((
1141		-* Unit: times.
1142		-* Range: 0 to 100
1143		-)))
1144		-|(% style="width:173px" %)Retry timeout|(% style="width:122px" %)HSW10102|(% colspan="2" style="width:506px" %)(((
1145		-* Unit: s.
1146		-* Range: 0 to 30
1147		-)))
	845	+|(% style="width:173px" %)Wait timeout|(% style="width:122px" %)HSW10099|(% colspan="2" style="width:506px" %)Unit: ms. Range: 0~~30000
	846	+|(% style="width:173px" %)receive timeout|(% style="width:122px" %)HSW10100|(% colspan="2" style="width:506px" %)Unit: ms. Range: 0~~30000
	847	+|(% style="width:173px" %)Retry time|(% style="width:122px" %)HSW10101|(% colspan="2" style="width:506px" %)Unit: times. Range: 0~~100
	848	+|(% style="width:173px" %)Retry timeout|(% style="width:122px" %)HSW10102|(% colspan="2" style="width:506px" %)Unit: s. Range: 0~~30
1148	1148	|(% style="width:173px" %)HMI station number|(% style="width:122px" %)HSW10103|(% colspan="2" style="width:506px" %)
1149	1149	|(% style="width:173px" %)PLC station number|(% style="width:122px" %)HSW10104|(% colspan="2" style="width:506px" %)
1150	1150	|(% colspan="1" rowspan="11" style="width:102px" %)COM1-3|(% style="width:173px" %)Communication mode|(% style="width:122px" %)HSW10120|(% colspan="2" style="width:506px" %)(((
...	...	@@ -1177,22 +1177,10 @@
1177	1177	* =1: ODD
1178	1178	* =2: EVEN
1179	1179	)))
1180		-|(% style="width:173px" %)Wait timeout|(% style="width:122px" %)HSW10125|(% colspan="2" style="width:506px" %)(((
1181		-* Unit: ms.
1182		-* Range: 0 to 30000
1183		-)))
1184		-|(% style="width:173px" %)receive timeout|(% style="width:122px" %)HSW10126|(% colspan="2" style="width:506px" %)(((
1185		-* Unit: ms.
1186		-* Range: 0 to 30000
1187		-)))
1188		-|(% style="width:173px" %)Retry time|(% style="width:122px" %)HSW10127|(% colspan="2" style="width:506px" %)(((
1189		-* Unit: times.
1190		-* Range: 0 to 100
1191		-)))
1192		-|(% style="width:173px" %)Retry timeout|(% style="width:122px" %)HSW10128|(% colspan="2" style="width:506px" %)(((
1193		-* Unit: s.
1194		-* Range: 0 to 30
1195		-)))
	881	+|(% style="width:173px" %)Wait timeout|(% style="width:122px" %)HSW10125|(% colspan="2" style="width:506px" %)Unit: ms. Range: 0~~30000
	882	+|(% style="width:173px" %)receive timeout|(% style="width:122px" %)HSW10126|(% colspan="2" style="width:506px" %)Unit: ms. Range: 0~~30000
	883	+|(% style="width:173px" %)Retry time|(% style="width:122px" %)HSW10127|(% colspan="2" style="width:506px" %)Unit: times. Range: 0~~100
	884	+|(% style="width:173px" %)Retry timeout|(% style="width:122px" %)HSW10128|(% colspan="2" style="width:506px" %)Unit: s. Range: 0~~30
1196	1196	|(% style="width:173px" %)HMI station number|(% style="width:122px" %)HSW10129|(% colspan="2" style="width:506px" %)
1197	1197	|(% style="width:173px" %)PLC station number|(% style="width:122px" %)HSW10130|(% colspan="2" style="width:506px" %)
1198	1198	|(% colspan="1" rowspan="11" style="width:102px" %)COM2|(% style="width:173px" %)Communication mode|(% style="width:122px" %)HSW10072|(% colspan="2" style="width:506px" %)(((
...	...	@@ -1223,22 +1223,10 @@
1223	1223	* =1: ODD
1224	1224	* =2: EVEN
1225	1225	)))
1226		-|(% style="width:173px" %)Wait timeout|(% style="width:122px" %)HSW10077|(% colspan="2" style="width:506px" %)(((
1227		-* Unit: ms.
1228		-* Range: 0 to 30000
1229		-)))
1230		-|(% style="width:173px" %)receive timeout|(% style="width:122px" %)HSW10078|(% colspan="2" style="width:506px" %)(((
1231		-* Unit: ms.
1232		-* Range: 0 to 30000
1233		-)))
1234		-|(% style="width:173px" %)Retry time|(% style="width:122px" %)HSW10079|(% colspan="2" style="width:506px" %)(((
1235		-* Unit: times.
1236		-* Range: 0 to 100
1237		-)))
1238		-|(% style="width:173px" %)Retry timeout|(% style="width:122px" %)HSW10080|(% colspan="2" style="width:506px" %)(((
1239		-* Unit: s.
1240		-* Range: 0 to 30
1241		-)))
	915	+|(% style="width:173px" %)Wait timeout|(% style="width:122px" %)HSW10077|(% colspan="2" style="width:506px" %)Unit: ms. Range: 0~~30000
	916	+|(% style="width:173px" %)receive timeout|(% style="width:122px" %)HSW10078|(% colspan="2" style="width:506px" %)Unit: ms. Range: 0~~30000
	917	+|(% style="width:173px" %)Retry time|(% style="width:122px" %)HSW10079|(% colspan="2" style="width:506px" %)Unit: times. Range: 0~~100
	918	+|(% style="width:173px" %)Retry timeout|(% style="width:122px" %)HSW10080|(% colspan="2" style="width:506px" %)Unit: s. Range: 0~~30
1242	1242	|(% style="width:173px" %)HMI station number|(% style="width:122px" %)HSW10081|(% colspan="2" style="width:506px" %)
1243	1243	|(% style="width:173px" %)PLC station number|(% style="width:122px" %)HSW10082|(% colspan="2" style="width:506px" %)
1244	1244	|(% colspan="1" rowspan="11" style="width:102px" %)COM2-2|(% style="width:173px" %)Communication mode|(% style="width:122px" %)HSW10105|(% colspan="2" style="width:506px" %)(((
...	...	@@ -1269,22 +1269,10 @@
1269	1269	* =1: ODD
1270	1270	* =2: EVEN
1271	1271	)))
1272		-|(% style="width:173px" %)Wait timeout|(% style="width:122px" %)HSW10110|(% colspan="2" style="width:506px" %)(((
1273		-* Unit: ms.
1274		-* Range: 0 to 30000
1275		-)))
1276		-|(% style="width:173px" %)receive timeout|(% style="width:122px" %)HSW10111|(% colspan="2" style="width:506px" %)(((
1277		-* Unit: ms.
1278		-* Range: 0 to 30000
1279		-)))
1280		-|(% style="width:173px" %)Retry time|(% style="width:122px" %)HSW10112|(% colspan="2" style="width:506px" %)(((
1281		-* Unit: times.
1282		-* Range: 0 to 100
1283		-)))
1284		-|(% style="width:173px" %)Retry timeout|(% style="width:122px" %)HSW10113|(% colspan="2" style="width:506px" %)(((
1285		-* Unit: s.
1286		-* Range: 0 to 30
1287		-)))
	949	+|(% style="width:173px" %)Wait timeout|(% style="width:122px" %)HSW10110|(% colspan="2" style="width:506px" %)Unit: ms. Range: 0~~30000
	950	+|(% style="width:173px" %)receive timeout|(% style="width:122px" %)HSW10111|(% colspan="2" style="width:506px" %)Unit: ms. Range: 0~~30000
	951	+|(% style="width:173px" %)Retry time|(% style="width:122px" %)HSW10112|(% colspan="2" style="width:506px" %)Unit: times. Range: 0~~100
	952	+|(% style="width:173px" %)Retry timeout|(% style="width:122px" %)HSW10113|(% colspan="2" style="width:506px" %)Unit: s. Range: 0~~30
1288	1288	|(% style="width:173px" %)HMI station number|(% style="width:122px" %)HSW10114|(% colspan="2" style="width:506px" %)
1289	1289	|(% style="width:173px" %)PLC station number|(% style="width:122px" %)HSW10115|(% colspan="2" style="width:506px" %)
1290	1290	|(% colspan="1" rowspan="11" style="width:102px" %)COM3|(% style="width:173px" %)Communication mode|(% style="width:122px" %)HSW10083|(% colspan="2" style="width:506px" %)(((
...	...	@@ -1314,48 +1314,29 @@
1314	1314	* =1: ODD
1315	1315	* =2: EVEN
1316	1316	)))
1317		-|(% style="width:173px" %)Wait timeout|(% style="width:122px" %)HSW10088|(% colspan="2" style="width:506px" %)(((
1318		-* Unit: ms.
1319		-* Range: 0 to 30000
1320		-)))
1321		-|(% style="width:173px" %)receive timeout|(% style="width:122px" %)HSW10089|(% colspan="2" style="width:506px" %)(((
1322		-* Unit: ms.
1323		-* Range: 0 to 30000
1324		-)))
1325		-|(% style="width:173px" %)Retry time|(% style="width:122px" %)HSW10090|(% colspan="2" style="width:506px" %)(((
1326		-* Unit: times.
1327		-* Range: 0 to 100
1328		-)))
1329		-|(% style="width:173px" %)Retry timeout|(% style="width:122px" %)HSW10091|(% colspan="2" style="width:506px" %)(((
1330		-* Unit: s.
1331		-* Range: 0 to 30
1332		-)))
	982	+|(% style="width:173px" %)Wait timeout|(% style="width:122px" %)HSW10088|(% colspan="2" style="width:506px" %)Unit: ms. Range: 0~~30000
	983	+|(% style="width:173px" %)receive timeout|(% style="width:122px" %)HSW10089|(% colspan="2" style="width:506px" %)Unit: ms. Range: 0~~30000
	984	+|(% style="width:173px" %)Retry time|(% style="width:122px" %)HSW10090|(% colspan="2" style="width:506px" %)Unit: times. Range: 0~~100
	985	+|(% style="width:173px" %)Retry timeout|(% style="width:122px" %)HSW10091|(% colspan="2" style="width:506px" %)Unit: s. Range: 0~~30
1333	1333	|(% style="width:173px" %)HMI station number|(% style="width:122px" %)HSW10092|(% colspan="2" style="width:506px" %)
1334	1334	|(% style="width:173px" %)PLC station number|(% style="width:122px" %)HSW10093|(% colspan="2" style="width:506px" %)
1335	1335	|(% colspan="1" rowspan="2" style="width:102px" %)CAN port|(% style="width:173px" %)CAN1 baud rate|(% style="width:122px" %)HSW010116|(% style="width:299px" %)(((
1336		-Unit: K, the baud rate must be an integer.
1337		-
1338		-For example, when the baud rate required is 250000, just enter 250.
	989	+Unit: K, the baud rate must be an integer, for example, when the baud rate required is 250000, just enter 250.
1339	1339	)))|(% colspan="1" rowspan="2" style="width:218px" %)**✎Note: **If baud rate has been modified,please wait 5 seconds,then restart the HMI to take effect.
1340		-|(% style="width:173px" %)CAN2 baud rate|(% style="width:122px" %)HSW010117|(% style="width:299px" %)(((
1341		-Unit: K, the baud rate must be an integer.
	991	+|(% style="width:173px" %)CAN2 baud rate|(% style="width:122px" %)HSW010117|(% style="width:299px" %)Unit: K, the baud rate must be an integer, for example, when the baud rate required is 250000, just enter 250.
1342	1342
1343		-For example, when the baud rate required is 250000, just enter 250.
1344		-)))
	993	+== **Ethernet communication configuration** ==
1345	1345
1346		-== Ethernet communication configuration ==
1347		-
1348	1348	(% class="table-bordered" %)
1349		-|(% style="width:40px" %)**No.**|(% style="width:295px" %)**Function**|(% style="width:220px" %)**Address**|(% style="width:336px" %)**Description**
	996	+|=(% style="width: 40px;" %)**No.**|=(% style="width: 295px;" %)**Function**|=(% style="width: 220px;" %)**Address**|=(% style="width: 336px;" %)**Description**
1350	1350	|(% rowspan="7" style="width:40px" %)1|(% colspan="1" rowspan="7" style="width:295px" %)Ethernet parameter configuration for communication number 1 in list. Configure those addresses according to connected device. After configuration, wait for 5 seconds and restart the HMI.|(% style="width:220px" %)HSW11004|(% style="width:336px" %)Device IP address high word 1
1351	1351	|(% style="width:220px" %)HSW11005|(% style="width:336px" %)Device IP address high word 2
1352	1352	|(% style="width:220px" %)HSW11006|(% style="width:336px" %)Device IP address high word 3
1353	1353	|(% style="width:220px" %)HSW11007|(% style="width:336px" %)Device IP address high word 4
1354	1354	|(% style="width:220px" %)HSW11008|(% style="width:336px" %)Device Port number
1355		-|(% style="width:220px" %)HSW11009|(% style="width:336px" %)(((
1356		-~=2 TCP
1357		-
1358		-~=3 UDP
	1002	+|(% style="width:220px" %)HSW11009|=(% style="width: 336px;" %)(((
	1003	+* =2 TCP
	1004	+* =3 UDP
1359	1359	)))
1360	1360	|(% style="width:220px" %)HSW11010|(% style="width:336px" %)Reserved
1361	1361	|(% rowspan="7" style="width:40px" %)2|(% colspan="1" rowspan="7" style="width:295px" %)Ethernet parameter configuration for communication number 2 in list. Configure those addresses according to connected device. After configuration, wait for 5 seconds and restart the HMI.|(% style="width:220px" %)HSW11011|(% style="width:336px" %)Device IP address high word 1
...	...	@@ -1363,10 +1363,9 @@
1363	1363	|(% style="width:220px" %)HSW11013|(% style="width:336px" %)Device IP address high word 3
1364	1364	|(% style="width:220px" %)HSW11014|(% style="width:336px" %)Device IP address high word 4
1365	1365	|(% style="width:220px" %)HSW11015|(% style="width:336px" %)Device Port number
1366		-|(% style="width:220px" %)HSW11016|(% style="width:336px" %)(((
1367		-~=2 TCP
1368		-
1369		-~=3 UDP
	1012	+|(% style="width:220px" %)HSW11016|=(% style="width: 336px;" %)(((
	1013	+* =2 TCP
	1014	+* =3 UDP
1370	1370	)))
1371	1371	|(% style="width:220px" %)HSW11017|(% style="width:336px" %)Reserved
1372	1372	|(% style="width:40px" %)…|(% style="width:295px" %) |(% style="width:220px" %)…|(% style="width:336px" %)…
...	...	@@ -1375,11 +1375,7 @@
1375	1375	|(% style="width:220px" %)HSW11223|(% style="width:336px" %)Device IP address high word 3
1376	1376	|(% style="width:220px" %)HSW11224|(% style="width:336px" %)Device IP address high word 4
1377	1377	|(% style="width:220px" %)HSW11225|(% style="width:336px" %)Device Port number
1378		-|(% style="width:220px" %)HSW11226|(% style="width:336px" %)(((
1379		-~=2 TCP;
1380		-
1381		-~=3 UDP
1382		-)))
	1023	+|(% style="width:220px" %)HSW11226|=(% style="width: 336px;" %)2 TCP; =3 UDP
1383	1383	|(% style="width:220px" %)HSW11227|(% style="width:336px" %)Reserved
1384	1384
1385	1385	(% class="box infomessage" %)
...	...	@@ -1387,7 +1387,7 @@
1387	1387	**✎Note:** The number of Ethernet connections supported by different HMI series varies.
1388	1388	)))
1389	1389
1390		-== Communication control ==
	1031	+== **Communication control** ==
1391	1391
1392	1392	(% class="table-bordered" %)
1393	1393	|=(% style="width: 135px;" %)**Communication No.**|=(% style="width: 102px;" %)**Station No.**|=(% style="width: 185px;" %)**Control bit**|=(% style="width: 191px;" %)**Communication lamp**|=(% style="width: 271px;" %)**Description**

6.png

Author

...	...	@@ -1,1 +1,0 @@
1		-XWiki.Mora

Size

...	...	@@ -1,1 +1,0 @@
1		-20.1 KB

Content