Changes for page 13 HMI Internal Registers

Summary

• Page properties (3 modified, 0 added, 0 removed)
• Attachments (0 modified, 1 added, 0 removed)
  • 6.png

Details

Page properties

Title

...	...	@@ -1,1 +1,1 @@
1		-12 HMI internal registers
	1	+13.HMI Internal Registers

Author

...	...	@@ -1,1 +1,1 @@
1		-XWiki.Stone
	1	+XWiki.Mora

Content

...	...	@@ -4,11 +4,11 @@
4	4
5	5	*HSW, HDW, HUW, HAW are word address, HSX, HDX, HUX, HAX are bit address.
6	6
7		-1. **System data area (HSW): **A special register defined by the system.
8		-1. **Data storage area (HDW/HDX): **Users store user data.
9		-1. **System data area (HUW): **A special register defined by the system.
10		-1. **System Data (HAW)**: System register used for power-off save.
11		-1. **Recipe index area (RPW): **System register used for recipe index.
	7	+* **System data area (HSW): **A special register defined by the system.
	8	+* **Data storage area (HDW/HDX): **Users store user data.
	9	+* **System data area (HUW): **A special register defined by the system.
	10	+* **System Data (HAW)**: System register used for power-off save.
	11	+* **Recipe index area (RPW): **System register used for recipe index.
12	12
13	13	HMI internal registers are divided into bit address and word address, which can be accessed in two ways (take HDW as an example).
14	14
...	...	@@ -25,6 +25,11 @@
25	25	* The address of the bit address HDX is with a decimal point while word addresses are integers.
26	26	)))
27	27
	28	+= Address ranges table =
	29	+
	30	+(% style="text-align:center" %)
	31	+[[image:6.png]]
	32	+
28	28	= **Data storage area (HDW/HDX)** =
29	29
30	30	It is used to save the temporary data of project.
...	...	@@ -60,8 +60,8 @@
60	60
61	61	It is used for system special registers (reserved by system).
62	62
63		-1. Access as word, and serial number range is from HUW0 to HUW199999.
64		-1. Access as bit, and serial number range is from HUX0.0 to HUX199999.15.
	68	+1. Access as word, and serial number range is from HUW0 to HUW1599.
	69	+1. Access as bit, and serial number range is from HUX0.0 to HUX1599.15.
65	65
66	66	**✎Note:**
67	67
...	...	@@ -135,8 +135,8 @@
135	135	(% class="table-bordered" style="width:1024px" %)
136	136	|=(% scope="row" style="width: 160px;" %)**Address**|=(% style="width: 282px;" %)**Function**|=(% style="width: 452px;" %)**Description**
137	137	|=(% style="width: 160px;" %)HSW0|(% style="width:282px" %)Language switch|(% style="width:452px" %)Multiple language could be set in the project, HMI support maximum 8 languages. (Power-down save supported)
138		-|=(% style="width: 160px;" %)HSW1|(% style="width:282px" %)Beep frequency|(% style="width:452px" %)Frequency range: 0~~4000
139		-|=(% style="width: 160px;" %)HSW2|(% style="width:282px" %)Beep volume|(% style="width:452px" %)Volume range: 0~~80
	143	+|=(% style="width: 160px;" %)HSW1|(% style="width:282px" %)Beep frequency (Only valid in HMI V1.0 System)|(% style="width:452px" %)Frequency range: 0~~4000
	144	+|=(% style="width: 160px;" %)HSW2|(% style="width:282px" %)Beep volume (Only valid in HMI V1.0 System)|(% style="width:452px" %)Volume range: 0~~80
140	140	|=(% style="width: 160px;" %)HSW3|(% style="width:282px" %)Beep time|(% style="width:452px" %)Unit: ms
141	141	|=(% style="width: 160px;" %)HSW4|(% style="width:282px" %)Beep whether enable or not|(% style="width:452px" %)(((
142	142	* =0: Enable.
...	...	@@ -150,7 +150,7 @@
150	150	)))
151	151	|=(% style="width: 160px;" %)HSW6~~HSW7|(% style="width:282px" %)Number of alarms|(% style="width:452px" %)The number of alarm (it also includes the records of alarm confirmed)
152	152	|=(% style="width: 160px;" %)HSW8|(% style="width:282px" %)Number of unconfirmed history alarm|(% style="width:452px" %)The number of unconfirmed history alarm
153		-|=(% style="width: 160px;" %)HSW9|(% style="width:282px" %)Time out tip|(% style="width:452px" %)(((
	158	+|=(% style="width: 160px;" %)HSW9|(% style="width:282px" %)Time out prompt|(% style="width:452px" %)(((
154	154	* =0: Enable
155	155	* =1: Disable
156	156	)))
...	...	@@ -175,6 +175,7 @@
175	175	* =5: Friday.
176	176	* =6: Saturday.
177	177	)))
	183	+|=(% style="width: 160px;" %)HSW39|(% style="width:282px" %)Beep type(Only valid in HMI V2.0 System)|(% style="width:452px" %)Type range: 1-5, Default is 1.
178	178	|=(% style="width: 160px;" %)HSW134|(% style="width:282px" %)(((
179	179	Whether the Script is read through
180	180
...	...	@@ -241,8 +241,8 @@
241	241	* =2: HSX521.1=1, delete all trend graph.
242	242	* =4: HSX521.2=1, delete all alarms.
243	243	* =16: HSX521.4=1, delete history XY plot.
244		-* =32: HSX521.5=1, delete data records in SD card or flash dish;(Please make a setting which is saved to flash disk or SD card in project setting).
245		-* =64: HSX521.6=1, delete alarms records in SD card or flash dish; (Please make a setting which is saved to flash disk or SD card in project setting).
	250	+* =32: HSX521.5=1, delete data records in SD card or USB flash disk;(Please make a setting which is saved to USB flash disk or SD card in project setting).
	251	+* =64: HSX521.6=1, delete alarms records in SD card or USB flash disk; (Please make a setting which is saved to USB flash disk or SD card in project setting).
246	246	)))
247	247	|=(% style="width: 160px;" %)HSW522|(% style="width:282px" %)Copy and paste the alarm/data files in flash to the USB flash disk|(% style="width:452px" %)(((
248	248	* =0: No operation
...	...	@@ -339,9 +339,11 @@
339	339	* HDX882.1=0 SD card doesn't execute storage or storage finished.
340	340	* HDX882.1=1 SD card is reading data, don't remove SD card.
341	341	)))
342		-|=(% style="width: 160px;" %)HSW884|(% style="width:282px" %)Enter setup screen|(% style="width:452px" %)(((
343		-* = 0: Do not into setup screen
344		-* = 1: Enter setup screen
	348	+|=(% style="width: 160px;" %)HSW884|(% style="width:282px" %)Enter the system network configuration interface|(% style="width:452px" %)(((
	349	+* =0: Do not enter the network configuration interface
	350	+* =1: Enter the system network configuration interface.
	351	+** ig series HMI only supports to enter the system interface
	352	+
345	345	)))
346	346	|=(% style="width: 160px;" %)HSW885|(% style="width:282px" %)When the control object hides the address is read failed (communication failure), set the display mode of the object|(% style="width:452px" %)(((
347	347	* = 0: displayed by object setting.
...	...	@@ -448,7 +448,7 @@
448	448	Address mapping polling cycle, effective range: 40~~1000ms, default: 300ms.
449	449
450	450	* When the set value is greater than 1000, the value is 1000.
451		-* When the set value is greater than 1000, it changes to the default value 300
	459	+* When the set value is lower than 40, it changes to the default value 300
452	452	)))
453	453	|=(% style="width: 160px;" %)HSW1087|(% style="width:282px" %)Control write interval in address mapping|(% style="width:452px" %)(((
454	454	After reading data to the device for N times, Perform an address mapping write operation. N is the interval value. The effective range: 0~~5, and default is 2.
...	...	@@ -483,6 +483,8 @@
483	483	* =0, Default value
484	484	* =1, Release the alarm generated before the last power-down when starting up
485	485	)))
	494	+|=(% style="width: 160px;" %)HSW1200|(% colspan="1" rowspan="2" style="width:282px" %)TSAP settings for HMI in the Siemens LOGO! 8 protocol(ig series or HMI V2.0)|(% style="width:452px" %)HMI local TSAP, which corresponds to the remote TSAP of PLC
	495	+|=(% style="width: 160px;" %)HSW1201|(% style="width:452px" %)HMI remote TSAP, which corresponds to the local TSAP of PLC
486	486	|=(% style="width: 160px;" %)HSW1450|(% style="width:282px" %)Enable objects level password function|(% style="width:452px" %)(((
487	487	* =0, Disable
488	488	* =1, Enable
...	...	@@ -510,6 +510,10 @@
510	510	* HSX1502.0=1: Modification comfirmed. Save the data of HSW1450~~HSW1501 to a file for immediate effect.
511	511	* HSX1502.1=1:Modification cancelled. Restore the current data of hSW1450-HSW1501 to the data saved in the file last time.
512	512	)))
	523	+|=(% style="width: 160px;" %)HSW1509|(% style="width:282px" %)Curve width|(% style="width:452px" %)(((
	524	+* =0: Use the curve width set by project default.
	525	+* =1 to 10: use special register to set curve width.
	526	+)))
513	513	|=(% style="width: 160px;" %)HSW1603|(% style="width:282px" %)Number of current unreleased alarms|(% style="width:452px" %)The number of current unreleased alarms in alarm record file.
514	514	|=(% style="width: 160px;" %)HSW1604|(% style="width:282px" %)The auxiliary judgment address when the control bit in the Object Lock fails to be read|(% style="width:452px" %)(((
515	515	* =0: The auxiliary address is invalid.
...	...	@@ -585,6 +585,9 @@
585	585	* =0: Server connection exception
586	586	* =1: Server connection is OK
587	587	)))
	602	+|=(% style="width: 160px;" %)HSW1740|(% style="width:282px" %)Wi-fi signal strength|(% style="width:452px" %)(((
	603	+Display the value of Wi-fi signal signal strength, ranges from 0~~100 (Signal strength is automatically obtained only once when HMI is powered on, and it will not be automatically updated. It needs to be used with the HSW1890)
	604	+)))
588	588	|=(% style="width: 160px;" %)HSW1741|(% colspan="1" rowspan="12" style="width:282px" %)Related IP register in 4Gnetwork status (It is valid when HMI is connected to 4G)|(% style="width:452px" %)Local IP address high byte 1
589	589	|=(% style="width: 160px;" %)HSW1742|(% style="width:452px" %)Local IP address high byte 2
590	590	|=(% style="width: 160px;" %)HSW1743|(% style="width:452px" %)Local IP address high byte 3
...	...	@@ -612,10 +612,180 @@
612	612	* =1: Server connection is OK
613	613	)))
614	614	|=(% style="width: 160px;" %)HSW1761|(% style="width:282px" %)Display 4G network signal strength|(% style="width:452px" %)Signal strength: 0~~31. The greater the value ,the signal is stronger
	632	+|=(% style="width: 160px;" %)(((
	633	+HSW1762
	634	+)))|(% colspan="1" rowspan="13" style="width:282px" %)(((
	635	+Note: Valid when Ethernet2 of HMI is plugged into the network cable.
	636	+①、When the Ethernet setting is enabled in the project parameters, this register displays the set value.
	637	+②. When the Ethernet setting is not enabled in the engineering parameters, the register displays the Ethernet IP automatically acquired by the HMI.
	638	+③. When the HMI is not plugged into the network cable, the register will show 0 whether the engineering parameters are set or not.
	639	+④.IP related registers can be read and written (only static IP mode can be written).
	640	+)))|(% style="width:452px" %)(((
	641	+Ethernet2 Local IP address high byte 1
	642	+)))
	643	+|=(% style="width: 160px;" %)(((
	644	+HSW1763
	645	+)))|(% style="width:452px" %)(((
	646	+Ethernet2 Local IP address high byte 2
	647	+)))
	648	+|=(% style="width: 160px;" %)(((
	649	+HSW1764
	650	+)))|(% style="width:452px" %)(((
	651	+Ethernet2 Local IP address high byte 3
	652	+)))
	653	+|=(% style="width: 160px;" %)(((
	654	+HSW1765
	655	+)))|(% style="width:452px" %)(((
	656	+Ethernet2 Local IP address high byte 4
	657	+)))
	658	+|=(% style="width: 160px;" %)(((
	659	+HSW1766
	660	+)))|(% style="width:452px" %)(((
	661	+Ethernet2 Local mask IP address high byte 1
	662	+)))
	663	+|=(% style="width: 160px;" %)(((
	664	+HSW1767
	665	+)))|(% style="width:452px" %)(((
	666	+Ethernet2 Local mask IP address high byte 2
	667	+)))
	668	+|=(% style="width: 160px;" %)(((
	669	+HSW1768
	670	+)))|(% style="width:452px" %)Ethernet2 Local mask IP address high byte 3
	671	+|=(% style="width: 160px;" %)HSW1769|(% style="width:452px" %)Ethernet2 Local mask IP address high byte 4
	672	+|=(% style="width: 160px;" %)(((
	673	+HSW1770
	674	+)))|(% style="width:452px" %)(((
	675	+Ethernet2 Local gateway IP address high byte 1
	676	+)))
	677	+|=(% style="width: 160px;" %)(((
	678	+HSW1771
	679	+)))|(% style="width:452px" %)(((
	680	+Ethernet2 Local gateway IP address high byte 2
	681	+)))
	682	+|=(% style="width: 160px;" %)(((
	683	+HSW1772
	684	+)))|(% style="width:452px" %)(((
	685	+Ethernet2 Local gateway IP address high byte 3
	686	+)))
	687	+|=(% style="width: 160px;" %)(((
	688	+HSW1773
	689	+)))|(% style="width:452px" %)(((
	690	+Ethernet2 Local gateway IP address high byte 4
	691	+)))
	692	+|=(% style="width: 160px;" %)(((
	693	+HSW1774
	694	+)))|(% style="width:452px" %)(((
	695	+Ethernet2 Local Port Address
	696	+)))
	697	+|=(% style="width: 160px;" %)(((
	698	+HSW1775
	699	+)))|(% colspan="1" rowspan="6" style="width:282px" %)(((
	700	+①Display the MAC code of Ethernet2 NIC
	701	+
	702	+(hexadecimal display)
	703	+
	704	+②Read-only mode, not modifiable
	705	+)))|(% style="width:452px" %)(((
	706	+Ethernet2 Local MAC code high byte 1
	707	+)))
	708	+|=(% style="width: 160px;" %)(((
	709	+HSW1776
	710	+)))|(% style="width:452px" %)(((
	711	+Ethernet2 Local MAC code high byte 2
	712	+)))
	713	+|=(% style="width: 160px;" %)(((
	714	+HSW1777
	715	+)))|(% style="width:452px" %)(((
	716	+Ethernet2 Local MAC code high byte 3
	717	+)))
	718	+|=(% style="width: 160px;" %)(((
	719	+HSW1778
	720	+)))|(% style="width:452px" %)(((
	721	+Ethernet2 Local MAC code high byte 4
	722	+)))
	723	+|=(% style="width: 160px;" %)(((
	724	+HSW1779
	725	+)))|(% style="width:452px" %)(((
	726	+Ethernet2 Local MAC code high byte 5
	727	+)))
	728	+|=(% style="width: 160px;" %)(((
	729	+HSW1780
	730	+)))|(% style="width:452px" %)(((
	731	+Ethernet2 Local MAC code high byte 6
	732	+)))
	733	+|=(% style="width: 160px;" %)(((
	734	+HSW1781
	735	+)))|(% colspan="1" rowspan="8" style="width:282px" %)(((
	736	+①Display and modify DNS1 and DNS2 of Ethernet2
	737	+
	738	+②Related registers can be read and written mode (only static IP mode can be written)
	739	+)))|(% style="width:452px" %)(((
	740	+Ethernet2 Local DNS1 address high byte 1
	741	+)))
	742	+|=(% style="width: 160px;" %)(((
	743	+HSW1782
	744	+)))|(% style="width:452px" %)(((
	745	+Ethernet2 Local DNS1 address high byte 2
	746	+)))
	747	+|=(% style="width: 160px;" %)(((
	748	+HSW1783
	749	+)))|(% style="width:452px" %)(((
	750	+Ethernet2 Local DNS1 address high byte 3
	751	+)))
	752	+|=(% style="width: 160px;" %)(((
	753	+HSW1784
	754	+)))|(% style="width:452px" %)(((
	755	+Ethernet2 Local DNS1 address high byte 4
	756	+)))
	757	+|=(% style="width: 160px;" %)(((
	758	+HSW1785
	759	+)))|(% style="width:452px" %)(((
	760	+Ethernet2 Local DNS2 address high byte 1
	761	+)))
	762	+|=(% style="width: 160px;" %)(((
	763	+HSW1786
	764	+)))|(% style="width:452px" %)(((
	765	+Ethernet2 Local DNS2 address high byte 2
	766	+)))
	767	+|=(% style="width: 160px;" %)(((
	768	+HSW1787
	769	+)))|(% style="width:452px" %)(((
	770	+Ethernet2 Local DNS2 address high byte 3
	771	+)))
	772	+|=(% style="width: 160px;" %)(((
	773	+HSW1788
	774	+)))|(% style="width:452px" %)(((
	775	+Ethernet2 Local DNS2 address high byte 4
	776	+)))
	777	+|=(% style="width: 160px;" %)(((
	778	+HSW1789
	779	+)))|(% colspan="1" style="width:282px" %)(((
	780	+Display or set the dynamic or static IP mode of Ethernet2
	781	+)))|(% style="width:452px" %)(((
	782	+HSX1789.0 = 0, Static IP mode
	783	+
	784	+HSX1789.0 = 1, dynamic IP mode
	785	+)))
	786	+|=(% style="width: 160px;" %)(((
	787	+HSW1790
	788	+)))|(% colspan="1" style="width:282px" %)(((
	789	+Confirm Ethernet2 IP, subnet mask, gateway, DNS1, DNS2, and dynamic static IP settings
	790	+)))|(% style="width:452px" %)(((
	791	+~= 1, confirm the setting (i.e., after modifying IP-related information, set this address to 1, representing confirmation of the modification, after which it will be reset to 0)
	792	+)))
	793	+|=(% style="width: 160px;" %)(((
	794	+HSW1791
	795	+)))|(% colspan="1" style="width:282px" %)(((
	796	+Network status of the Ethernet2 connection server
	797	+)))|(% style="width:452px" %)(((
	798	+~= 0, connection to the server is abnormal = 1, connection to the server is normal
	799	+)))
615	615	|=(% style="width: 160px;" %)HSW1852|(% style="width:282px" %)Control the interval in two consecutive clicks|(% style="width:452px" %)Limit range: 1~~500ms. The default is 100 ms.
616	616	|=(% style="width: 160px;" %)HSW1853|(% style="width:282px" %)File format for exporting data records to USB flash drive or SD card|(% style="width:452px" %)(((
617	617	* =0: db database
618	618	* =1: CSV
	804	+
	805	+(Only valid for script function DbToCsvFile)
619	619	)))
620	620	|=(% style="width: 160px;" %)HSW1854|(% style="width:282px" %)High and low word conversion type|(% style="width:452px" %)(((
621	621	* =0: use the old high-low word conversion (default)
...	...	@@ -637,14 +637,96 @@
637	637	* =1: download firmware
638	638	* =2: enter the background
639	639	)))
	827	+|=(% style="width: 160px;" %)HSW1865|(% style="width:282px" %)Priority connection to the cloud|(% style="width:452px" %)(((
	828	+* =0: priority Ethernet
	829	+* =1: priority WLAN
	830	+* =2: priority 4G
	831	+)))
	832	+|=(% style="width: 160px;" %)HSW1866|(% style="width:282px" %)Delete the Lua extension module file|(% style="width:452px" %)(((
	833	+* =0: delete;
	834	+* = Others: do not delete
	835	+)))
	836	+|=(% style="width: 160px;" %)HSW1867|(% style="width:282px" %)Reset mode|(% style="width:452px" %)(((
	837	+Monitor address is set during reset of reset switch, whether to cancel reset,
	838	+
	839	+* = 0: yes (default);
	840	+* = 1: no
	841	+)))
	842	+|=(% style="width: 160px;" %)HSW1868|(% style="width:282px" %)Double-click or long press the record type table mode|(% style="width:452px" %)(((
	843	+Controls whether the button pops up when double-clicking or long pressing on record type table object
	844	+
	845	+* = 0: yes (default);
	846	+* = 1: no
	847	+)))
	848	+|=(% style="width: 160px;" %)(((
	849	+HSW1869
	850	+)))|(% style="width:282px" %)(((
	851	+Dynamic screensaver countdown
	852	+)))|(% style="width:452px" %)(((
	853	+Countdown to enter dynamic screensaver effect, unit (S)
	854	+)))
	855	+|=(% style="width: 160px;" %)(((
	856	+HSW1870
	857	+)))|(% style="width:282px" %)(((
	858	+Display or set the dynamic or static IP mode of Ethernet1
	859	+)))|(% style="width:452px" %)(((
	860	+HSX1870.0 = 0, Static IP mode
	861	+
	862	+HSX1870.0 = 1, dynamic IP mode
	863	+)))
	864	+|=(% style="width: 160px;" %)(((
	865	+HSW1871
	866	+)))|(% style="width:282px" %)(((
	867	+Confirm the IP, subnet mask, gateway, DNS1, DNS2, and dynamic static IP settings for Ethernet1
	868	+)))|(% style="width:452px" %)(((
	869	+~= 1, confirm the setting (i.e., after modifying IP-related information, set this address to 1, representing confirmation of the modification, after which it will be reset to 0)
	870	+)))
	871	+|=(% style="width: 160px;" %)(((
	872	+HSW1872
	873	+)))|(% colspan="1" rowspan="8" style="width:282px" %)(((
	874	+①Display and modify DNS1 and DNS2 of Ethernet1
	875	+
	876	+②Related registers can be read and written mode (only static IP mode can be written)
	877	+)))|(% style="width:452px" %)(((
	878	+Ethernet1 Local DNS1 address high byte 1
	879	+)))
	880	+|=(% style="width: 160px;" %)(((
	881	+HSW1873
	882	+)))|(% style="width:452px" %)Ethernet1 Local DNS1 address high byte 2
	883	+|=(% style="width: 160px;" %)(((
	884	+HSW1874
	885	+)))|(% style="width:452px" %)Ethernet1 Local DNS1 address high byte 3
	886	+|=(% style="width: 160px;" %)(((
	887	+HSW1875
	888	+)))|(% style="width:452px" %)Ethernet1 Local DNS1 address high byte 4
	889	+|=(% style="width: 160px;" %)(((
	890	+HSW1876
	891	+)))|(% style="width:452px" %)Ethernet1 Local DNS2 address high byte 1
	892	+|=(% style="width: 160px;" %)(((
	893	+HSW1877
	894	+)))|(% style="width:452px" %)Ethernet1 Local DNS2 address high byte 2
	895	+|=(% style="width: 160px;" %)(((
	896	+HSW1878
	897	+)))|(% style="width:452px" %)Ethernet1 Local DNS2 address high byte 3
	898	+|=(% style="width: 160px;" %)(((
	899	+HSW1879
	900	+)))|(% style="width:452px" %)Ethernet1 Local DNS2 address high byte 4
	901	+|=(% style="width: 160px;" %)HSW1890|(% colspan="1" style="width:282px" %)Enable refresh current network signal|(% style="width:452px" %)(((
	902	+* =1: Refresh the network signal once after triggered (This register will be automatically reset after triggered, only update the signal value once after per 15 seconds, not able to update twice in the short interval)
	903	+* =Others: not refresh
	904	+)))
	905	+|=(% style="width: 160px;" %)HSW1891|(% colspan="1" style="width:282px" %)Enable clear cache for screen data  |(% style="width:452px" %)(((
	906	+* =1, not clear screen cache when switch language
	907	+* =2, trigger clear cache of all screens for once time
	908	+* =3, always clear cache of all screen data
	909	+)))
640	640	|=(% style="width: 160px;" %)HSW10000~~19999|(% style="width:282px" %)Power-down storage area|(% style="width:452px" %)After restart, the data remains
641	641	|=(% style="width: 160px;" %)HSW10035|(% rowspan="13" style="width:282px" %)(((
642		-**✎Note: **Only valid when the HMI is plugged into the Ethernet cable.
643		-
644		-1. If Ethernet settings is enabled in project parameters, this register displays the set value.
645		-1. If Ethernet settings is not enabled in project parameters, IP would automatically obtained IP.
646		-1. If HMI is not connected to the network, the register is displayed as 0 whether the engineering parameters are set.
647		-1. 4. All IP registers of HMI are read-only.
	912	+Note: Valid when Ethernet1 of HMI is plugged into the network cable.
	913	+① When the Ethernet setting is enabled in the project parameters, this register displays the set value.
	914	+② When the Ethernet setting is not enabled in the engineering parameters, the register displays the Ethernet IP automatically acquired by the HMI.
	915	+③ When the HMI is not plugged into the network cable, the register will show 0 whether the engineering parameters are set or not.
	916	+④ IP related registers can be read and written (only static IP mode can be written).
648	648	)))|(% style="width:452px" %)Local IP address high byte 1
649	649	|=(% style="width: 160px;" %)HSW10036|(% style="width:452px" %)Local IP address high byte 2
650	650	|=(% style="width: 160px;" %)HSW10037|(% style="width:452px" %)Local IP address high byte 3
...	...	@@ -659,9 +659,11 @@
659	659	|=(% style="width: 160px;" %)HSW10046|(% style="width:452px" %)Local gateway address high byte 4
660	660	|=(% style="width: 160px;" %)HSW10047|(% style="width:452px" %)Local port address
661	661	|=(% style="width: 160px;" %)HSW10048|(% rowspan="6" style="width:282px" %)(((
662		-Displays the MAC code of the current network card
	931	+①Display the MAC code of Ethernet1 NIC
663	663
664		-(Hexadecimal display)
	933	+(hexadecimal display)
	934	+
	935	+②Read-only mode, not modifiable
665	665	)))|(% style="width:452px" %)Local MAC code high word 1
666	666	|=(% style="width: 160px;" %)HSW10049|(% style="width:452px" %)Local MAC code high word 2
667	667	|=(% style="width: 160px;" %)HSW10050|(% style="width:452px" %)Local MAC code high word 3
...	...	@@ -668,7 +668,7 @@
668	668	|=(% style="width: 160px;" %)HSW10051|(% style="width:452px" %)Local MAC code high word 4
669	669	|=(% style="width: 160px;" %)HSW10052|(% style="width:452px" %)Local MAC code high word 5
670	670	|=(% style="width: 160px;" %)HSW10053|(% style="width:452px" %)Local MAC code high word 6
671		-|=(% style="width: 160px;" %)HSW10118|(% colspan="1" rowspan="2" style="width:282px" %)TSAP settings for HMI in the Siemens logo! 8 protocol|(% style="width:452px" %)HMI local TSAP, which corresponds to the remote TSAP of PLC
	942	+|=(% style="width: 160px;" %)HSW10118|(% colspan="1" rowspan="2" style="width:282px" %)TSAP settings for HMI in the Siemens LOGO! 8 protocol|(% style="width:452px" %)HMI local TSAP, which corresponds to the remote TSAP of PLC
672	672	|=(% style="width: 160px;" %)HSW10119|(% style="width:452px" %)HMI remote TSAP, which corresponds to the local TSAP of PLC
673	673	|=(% style="width: 160px;" %)HSW10461~~10493|(% style="width:282px" %)Remote access password|(% style="width:452px" %)8-character remote access password
674	674	|=(% style="width: 160px;" %)HSW10494~~10558|(% style="width:282px" %)Machine ID (Read only)|(% style="width:452px" %)Machine ID for remote access (read only 64-bit)
...	...	@@ -736,6 +736,7 @@
736	736	* =0: LAN or the external network both OK
737	737	* =1: Only LAN access
738	738	* =2: Only external network can access
	1010	+* =3: Close the functions
739	739	)))
740	740	|=(% style="width: 160px;" %)HSW11757|(% style="width:282px" %)Enable the valid date of the dynamic installment password|(% style="width:452px" %)(((
741	741	* =0: Disabled
...	...	@@ -750,11 +750,38 @@
750	750	)))
751	751	|=(% style="width: 160px;" %)HSW11760|(% style="width:282px" %)Screensaver countdown|(% style="width:452px" %)Display the countdown to enter the Screensaver, unit: second.
752	752	|=(% style="width: 160px;" %)HSW11761|(% style="width:282px" %)Screensaver screen number|(% style="width:452px" %)Set the screen number for Screensaver
	1025	+|=(% style="width: 160px;" %)(((
	1026	+HSW11762
	1027	+)))|(% style="width:282px" %)(((
	1028	+Dynamic screensaver control address
	1029	+)))|(% style="width:452px" %)(((
	1030	+HSX11762.0=0, initialize with project configuration;
753	753
754		-== **Serial port communication configuration** ==
	1032	+HSX11762.0=1, initialize with special register configuration;
755	755
	1034	+HSX11762.1=0, disable dynamic screensaver;
	1035	+
	1036	+HSX11762.1=1, enable dynamic screensaver
	1037	+)))
	1038	+|=(% style="width: 160px;" %)(((
	1039	+HSW11763
	1040	+)))|(% style="width:282px" %)(((
	1041	+Waiting time to enter the dynamic screensaver
	1042	+)))|(% style="width:452px" %)(((
	1043	+Waiting time when the screen is not operated, range 1~~720 minutes
	1044	+)))
	1045	+|=(% style="width: 160px;" %)(((
	1046	+HSW11764
	1047	+)))|(% style="width:282px" %)(((
	1048	+Animated screensaver animation type
	1049	+)))|(% style="width:452px" %)(((
	1050	+~=0: Raster,=1: Blinds,=2: Bubble
	1051	+)))
	1052	+
	1053	+== Serial port communication configuration ==
	1054	+
756	756	(% class="table-bordered" %)
757		-|=(% style="width: 102px;" %)Port|=(% style="width: 173px;" %)**Function**|=(% style="width: 122px;" %)**Address**|=(% colspan="2" style="width: 506px;" %)**Description**
	1056	+|=(% scope="row" style="width: 102px;" %)Port|=(% style="width: 173px;" %)**Function**|=(% style="width: 122px;" %)**Address**|=(% colspan="2" style="width: 506px;" %)**Description**
758	758	|(% colspan="1" rowspan="11" style="width:102px" %)COM1|(% style="width:173px" %)Communication mode|(% style="width:122px" %)HSW10061|(% colspan="2" style="width:506px" %)(((
759	759	* =0: RS232
760	760	* =1: RS485
...	...	@@ -784,10 +784,22 @@
784	784	* =1: ODD
785	785	* =2: EVEN
786	786	)))
787		-|(% style="width:173px" %)Wait timeout|(% style="width:122px" %)HSW10066|(% colspan="2" style="width:506px" %)Unit: ms. Range: 0~~30000
788		-|(% style="width:173px" %)reveive timeout|(% style="width:122px" %)HSW10067|(% colspan="2" style="width:506px" %)Unit: ms. Range: 0~~30000
789		-|(% style="width:173px" %)Retry time|(% style="width:122px" %)HSW10068|(% colspan="2" style="width:506px" %)Unit: times. Range: 0~~100
790		-|(% style="width:173px" %)Retry timeout|(% style="width:122px" %)HSW10069|(% colspan="2" style="width:506px" %)Unit: s. Range: 0~~300
	1086	+|(% style="width:173px" %)Wait timeout|(% style="width:122px" %)HSW10066|(% colspan="2" style="width:506px" %)(((
	1087	+* Unit: ms.
	1088	+* Range: 0 to 30000
	1089	+)))
	1090	+|(% style="width:173px" %)reveive timeout|(% style="width:122px" %)HSW10067|(% colspan="2" style="width:506px" %)(((
	1091	+* Unit: ms.
	1092	+* Range: 0 to 30000
	1093	+)))
	1094	+|(% style="width:173px" %)Retry time|(% style="width:122px" %)HSW10068|(% colspan="2" style="width:506px" %)(((
	1095	+* Unit: times.
	1096	+* Range: 0 to 100
	1097	+)))
	1098	+|(% style="width:173px" %)Retry timeout|(% style="width:122px" %)HSW10069|(% colspan="2" style="width:506px" %)(((
	1099	+* Unit: s.
	1100	+* Range: 0 to 300
	1101	+)))
791	791	|(% style="width:173px" %)HMI station number|(% style="width:122px" %)HSW10070|(% colspan="2" style="width:506px" %)
792	792	|(% style="width:173px" %)PLC station number|(% style="width:122px" %)HSW10071|(% colspan="2" style="width:506px" %)
793	793	|(% colspan="1" rowspan="11" style="width:102px" %)COM1-2|(% style="width:173px" %)Communication mode|(% style="width:122px" %)HSW10094|(% colspan="2" style="width:506px" %)(((
...	...	@@ -820,10 +820,22 @@
820	820	* =1: ODD
821	821	* =2: EVEN
822	822	)))
823		-|(% style="width:173px" %)Wait timeout|(% style="width:122px" %)HSW10099|(% colspan="2" style="width:506px" %)Unit: ms. Range: 0~~30000
824		-|(% style="width:173px" %)receive timeout|(% style="width:122px" %)HSW10100|(% colspan="2" style="width:506px" %)Unit: ms. Range: 0~~30000
825		-|(% style="width:173px" %)Retry time|(% style="width:122px" %)HSW10101|(% colspan="2" style="width:506px" %)Unit: times. Range: 0~~100
826		-|(% style="width:173px" %)Retry timeout|(% style="width:122px" %)HSW10102|(% colspan="2" style="width:506px" %)Unit: s. Range: 0~~30
	1134	+|(% style="width:173px" %)Wait timeout|(% style="width:122px" %)HSW10099|(% colspan="2" style="width:506px" %)(((
	1135	+* Unit: ms.
	1136	+* Range: 0 to 30000
	1137	+)))
	1138	+|(% style="width:173px" %)receive timeout|(% style="width:122px" %)HSW10100|(% colspan="2" style="width:506px" %)(((
	1139	+* Unit: ms.
	1140	+* Range: 0 to 30000
	1141	+)))
	1142	+|(% style="width:173px" %)Retry time|(% style="width:122px" %)HSW10101|(% colspan="2" style="width:506px" %)(((
	1143	+* Unit: times.
	1144	+* Range: 0 to 100
	1145	+)))
	1146	+|(% style="width:173px" %)Retry timeout|(% style="width:122px" %)HSW10102|(% colspan="2" style="width:506px" %)(((
	1147	+* Unit: s.
	1148	+* Range: 0 to 30
	1149	+)))
827	827	|(% style="width:173px" %)HMI station number|(% style="width:122px" %)HSW10103|(% colspan="2" style="width:506px" %)
828	828	|(% style="width:173px" %)PLC station number|(% style="width:122px" %)HSW10104|(% colspan="2" style="width:506px" %)
829	829	|(% colspan="1" rowspan="11" style="width:102px" %)COM1-3|(% style="width:173px" %)Communication mode|(% style="width:122px" %)HSW10120|(% colspan="2" style="width:506px" %)(((
...	...	@@ -856,10 +856,22 @@
856	856	* =1: ODD
857	857	* =2: EVEN
858	858	)))
859		-|(% style="width:173px" %)Wait timeout|(% style="width:122px" %)HSW10125|(% colspan="2" style="width:506px" %)Unit: ms. Range: 0~~30000
860		-|(% style="width:173px" %)receive timeout|(% style="width:122px" %)HSW10126|(% colspan="2" style="width:506px" %)Unit: ms. Range: 0~~30000
861		-|(% style="width:173px" %)Retry time|(% style="width:122px" %)HSW10127|(% colspan="2" style="width:506px" %)Unit: times. Range: 0~~100
862		-|(% style="width:173px" %)Retry timeout|(% style="width:122px" %)HSW10128|(% colspan="2" style="width:506px" %)Unit: s. Range: 0~~30
	1182	+|(% style="width:173px" %)Wait timeout|(% style="width:122px" %)HSW10125|(% colspan="2" style="width:506px" %)(((
	1183	+* Unit: ms.
	1184	+* Range: 0 to 30000
	1185	+)))
	1186	+|(% style="width:173px" %)receive timeout|(% style="width:122px" %)HSW10126|(% colspan="2" style="width:506px" %)(((
	1187	+* Unit: ms.
	1188	+* Range: 0 to 30000
	1189	+)))
	1190	+|(% style="width:173px" %)Retry time|(% style="width:122px" %)HSW10127|(% colspan="2" style="width:506px" %)(((
	1191	+* Unit: times.
	1192	+* Range: 0 to 100
	1193	+)))
	1194	+|(% style="width:173px" %)Retry timeout|(% style="width:122px" %)HSW10128|(% colspan="2" style="width:506px" %)(((
	1195	+* Unit: s.
	1196	+* Range: 0 to 30
	1197	+)))
863	863	|(% style="width:173px" %)HMI station number|(% style="width:122px" %)HSW10129|(% colspan="2" style="width:506px" %)
864	864	|(% style="width:173px" %)PLC station number|(% style="width:122px" %)HSW10130|(% colspan="2" style="width:506px" %)
865	865	|(% colspan="1" rowspan="11" style="width:102px" %)COM2|(% style="width:173px" %)Communication mode|(% style="width:122px" %)HSW10072|(% colspan="2" style="width:506px" %)(((
...	...	@@ -890,10 +890,22 @@
890	890	* =1: ODD
891	891	* =2: EVEN
892	892	)))
893		-|(% style="width:173px" %)Wait timeout|(% style="width:122px" %)HSW10077|(% colspan="2" style="width:506px" %)Unit: ms. Range: 0~~30000
894		-|(% style="width:173px" %)receive timeout|(% style="width:122px" %)HSW10078|(% colspan="2" style="width:506px" %)Unit: ms. Range: 0~~30000
895		-|(% style="width:173px" %)Retry time|(% style="width:122px" %)HSW10079|(% colspan="2" style="width:506px" %)Unit: times. Range: 0~~100
896		-|(% style="width:173px" %)Retry timeout|(% style="width:122px" %)HSW10080|(% colspan="2" style="width:506px" %)Unit: s. Range: 0~~30
	1228	+|(% style="width:173px" %)Wait timeout|(% style="width:122px" %)HSW10077|(% colspan="2" style="width:506px" %)(((
	1229	+* Unit: ms.
	1230	+* Range: 0 to 30000
	1231	+)))
	1232	+|(% style="width:173px" %)receive timeout|(% style="width:122px" %)HSW10078|(% colspan="2" style="width:506px" %)(((
	1233	+* Unit: ms.
	1234	+* Range: 0 to 30000
	1235	+)))
	1236	+|(% style="width:173px" %)Retry time|(% style="width:122px" %)HSW10079|(% colspan="2" style="width:506px" %)(((
	1237	+* Unit: times.
	1238	+* Range: 0 to 100
	1239	+)))
	1240	+|(% style="width:173px" %)Retry timeout|(% style="width:122px" %)HSW10080|(% colspan="2" style="width:506px" %)(((
	1241	+* Unit: s.
	1242	+* Range: 0 to 30
	1243	+)))
897	897	|(% style="width:173px" %)HMI station number|(% style="width:122px" %)HSW10081|(% colspan="2" style="width:506px" %)
898	898	|(% style="width:173px" %)PLC station number|(% style="width:122px" %)HSW10082|(% colspan="2" style="width:506px" %)
899	899	|(% colspan="1" rowspan="11" style="width:102px" %)COM2-2|(% style="width:173px" %)Communication mode|(% style="width:122px" %)HSW10105|(% colspan="2" style="width:506px" %)(((
...	...	@@ -924,10 +924,22 @@
924	924	* =1: ODD
925	925	* =2: EVEN
926	926	)))
927		-|(% style="width:173px" %)Wait timeout|(% style="width:122px" %)HSW10110|(% colspan="2" style="width:506px" %)Unit: ms. Range: 0~~30000
928		-|(% style="width:173px" %)receive timeout|(% style="width:122px" %)HSW10111|(% colspan="2" style="width:506px" %)Unit: ms. Range: 0~~30000
929		-|(% style="width:173px" %)Retry time|(% style="width:122px" %)HSW10112|(% colspan="2" style="width:506px" %)Unit: times. Range: 0~~100
930		-|(% style="width:173px" %)Retry timeout|(% style="width:122px" %)HSW10113|(% colspan="2" style="width:506px" %)Unit: s. Range: 0~~30
	1274	+|(% style="width:173px" %)Wait timeout|(% style="width:122px" %)HSW10110|(% colspan="2" style="width:506px" %)(((
	1275	+* Unit: ms.
	1276	+* Range: 0 to 30000
	1277	+)))
	1278	+|(% style="width:173px" %)receive timeout|(% style="width:122px" %)HSW10111|(% colspan="2" style="width:506px" %)(((
	1279	+* Unit: ms.
	1280	+* Range: 0 to 30000
	1281	+)))
	1282	+|(% style="width:173px" %)Retry time|(% style="width:122px" %)HSW10112|(% colspan="2" style="width:506px" %)(((
	1283	+* Unit: times.
	1284	+* Range: 0 to 100
	1285	+)))
	1286	+|(% style="width:173px" %)Retry timeout|(% style="width:122px" %)HSW10113|(% colspan="2" style="width:506px" %)(((
	1287	+* Unit: s.
	1288	+* Range: 0 to 30
	1289	+)))
931	931	|(% style="width:173px" %)HMI station number|(% style="width:122px" %)HSW10114|(% colspan="2" style="width:506px" %)
932	932	|(% style="width:173px" %)PLC station number|(% style="width:122px" %)HSW10115|(% colspan="2" style="width:506px" %)
933	933	|(% colspan="1" rowspan="11" style="width:102px" %)COM3|(% style="width:173px" %)Communication mode|(% style="width:122px" %)HSW10083|(% colspan="2" style="width:506px" %)(((
...	...	@@ -957,29 +957,48 @@
957	957	* =1: ODD
958	958	* =2: EVEN
959	959	)))
960		-|(% style="width:173px" %)Wait timeout|(% style="width:122px" %)HSW10088|(% colspan="2" style="width:506px" %)Unit: ms. Range: 0~~30000
961		-|(% style="width:173px" %)receive timeout|(% style="width:122px" %)HSW10089|(% colspan="2" style="width:506px" %)Unit: ms. Range: 0~~30000
962		-|(% style="width:173px" %)Retry time|(% style="width:122px" %)HSW10090|(% colspan="2" style="width:506px" %)Unit: times. Range: 0~~100
963		-|(% style="width:173px" %)Retry timeout|(% style="width:122px" %)HSW10091|(% colspan="2" style="width:506px" %)Unit: s. Range: 0~~30
	1319	+|(% style="width:173px" %)Wait timeout|(% style="width:122px" %)HSW10088|(% colspan="2" style="width:506px" %)(((
	1320	+* Unit: ms.
	1321	+* Range: 0 to 30000
	1322	+)))
	1323	+|(% style="width:173px" %)receive timeout|(% style="width:122px" %)HSW10089|(% colspan="2" style="width:506px" %)(((
	1324	+* Unit: ms.
	1325	+* Range: 0 to 30000
	1326	+)))
	1327	+|(% style="width:173px" %)Retry time|(% style="width:122px" %)HSW10090|(% colspan="2" style="width:506px" %)(((
	1328	+* Unit: times.
	1329	+* Range: 0 to 100
	1330	+)))
	1331	+|(% style="width:173px" %)Retry timeout|(% style="width:122px" %)HSW10091|(% colspan="2" style="width:506px" %)(((
	1332	+* Unit: s.
	1333	+* Range: 0 to 30
	1334	+)))
964	964	|(% style="width:173px" %)HMI station number|(% style="width:122px" %)HSW10092|(% colspan="2" style="width:506px" %)
965	965	|(% style="width:173px" %)PLC station number|(% style="width:122px" %)HSW10093|(% colspan="2" style="width:506px" %)
966	966	|(% colspan="1" rowspan="2" style="width:102px" %)CAN port|(% style="width:173px" %)CAN1 baud rate|(% style="width:122px" %)HSW010116|(% style="width:299px" %)(((
967		-Unit: K, the baud rate must be an integer, for example, when the baud rate required is 250000, just enter 250.
	1338	+Unit: K, the baud rate must be an integer.
	1339	+
	1340	+For example, when the baud rate required is 250000, just enter 250.
968	968	)))|(% colspan="1" rowspan="2" style="width:218px" %)**✎Note: **If baud rate has been modified,please wait 5 seconds,then restart the HMI to take effect.
969		-|(% style="width:173px" %)CAN2 baud rate|(% style="width:122px" %)HSW010117|(% style="width:299px" %)Unit: K, the baud rate must be an integer, for example, when the baud rate required is 250000, just enter 250.
	1342	+|(% style="width:173px" %)CAN2 baud rate|(% style="width:122px" %)HSW010117|(% style="width:299px" %)(((
	1343	+Unit: K, the baud rate must be an integer.
970	970
971		-== **Ethernet communication configuration** ==
	1345	+For example, when the baud rate required is 250000, just enter 250.
	1346	+)))
972	972
	1348	+== Ethernet communication configuration ==
	1349	+
973	973	(% class="table-bordered" %)
974		-|=(% style="width: 40px;" %)**No.**|=(% style="width: 295px;" %)**Function**|=(% style="width: 220px;" %)**Address**|=(% style="width: 336px;" %)**Description**
	1351	+|(% style="width:40px" %)**No.**|(% style="width:295px" %)**Function**|(% style="width:220px" %)**Address**|(% style="width:336px" %)**Description**
975	975	|(% rowspan="7" style="width:40px" %)1|(% colspan="1" rowspan="7" style="width:295px" %)Ethernet parameter configuration for communication number 1 in list. Configure those addresses according to connected device. After configuration, wait for 5 seconds and restart the HMI.|(% style="width:220px" %)HSW11004|(% style="width:336px" %)Device IP address high word 1
976	976	|(% style="width:220px" %)HSW11005|(% style="width:336px" %)Device IP address high word 2
977	977	|(% style="width:220px" %)HSW11006|(% style="width:336px" %)Device IP address high word 3
978	978	|(% style="width:220px" %)HSW11007|(% style="width:336px" %)Device IP address high word 4
979	979	|(% style="width:220px" %)HSW11008|(% style="width:336px" %)Device Port number
980		-|(% style="width:220px" %)HSW11009|=(% style="width: 336px;" %)(((
981		-* =2 TCP
982		-* =3 UDP
	1357	+|(% style="width:220px" %)HSW11009|(% style="width:336px" %)(((
	1358	+~=2 TCP
	1359	+
	1360	+~=3 UDP
983	983	)))
984	984	|(% style="width:220px" %)HSW11010|(% style="width:336px" %)Reserved
985	985	|(% rowspan="7" style="width:40px" %)2|(% colspan="1" rowspan="7" style="width:295px" %)Ethernet parameter configuration for communication number 2 in list. Configure those addresses according to connected device. After configuration, wait for 5 seconds and restart the HMI.|(% style="width:220px" %)HSW11011|(% style="width:336px" %)Device IP address high word 1
...	...	@@ -987,9 +987,10 @@
987	987	|(% style="width:220px" %)HSW11013|(% style="width:336px" %)Device IP address high word 3
988	988	|(% style="width:220px" %)HSW11014|(% style="width:336px" %)Device IP address high word 4
989	989	|(% style="width:220px" %)HSW11015|(% style="width:336px" %)Device Port number
990		-|(% style="width:220px" %)HSW11016|=(% style="width: 336px;" %)(((
991		-* =2 TCP
992		-* =3 UDP
	1368	+|(% style="width:220px" %)HSW11016|(% style="width:336px" %)(((
	1369	+~=2 TCP
	1370	+
	1371	+~=3 UDP
993	993	)))
994	994	|(% style="width:220px" %)HSW11017|(% style="width:336px" %)Reserved
995	995	|(% style="width:40px" %)…|(% style="width:295px" %) |(% style="width:220px" %)…|(% style="width:336px" %)…
...	...	@@ -998,7 +998,11 @@
998	998	|(% style="width:220px" %)HSW11223|(% style="width:336px" %)Device IP address high word 3
999	999	|(% style="width:220px" %)HSW11224|(% style="width:336px" %)Device IP address high word 4
1000	1000	|(% style="width:220px" %)HSW11225|(% style="width:336px" %)Device Port number
1001		-|(% style="width:220px" %)HSW11226|=(% style="width: 336px;" %)2 TCP; =3 UDP
	1380	+|(% style="width:220px" %)HSW11226|(% style="width:336px" %)(((
	1381	+~=2 TCP;
	1382	+
	1383	+~=3 UDP
	1384	+)))
1002	1002	|(% style="width:220px" %)HSW11227|(% style="width:336px" %)Reserved
1003	1003
1004	1004	(% class="box infomessage" %)
...	...	@@ -1006,10 +1006,10 @@
1006	1006	**✎Note:** The number of Ethernet connections supported by different HMI series varies.
1007	1007	)))
1008	1008
1009		-== **Communication control** ==
	1392	+== Communication control ==
1010	1010
1011	1011	(% class="table-bordered" %)
1012		-|(% style="width:135px" %)**Communication No.**|(% style="width:102px" %)**Station No.**|(% style="width:185px" %)**Control bit**|(% style="width:191px" %)**Communication lamp**|(% style="width:271px" %)**Description**
	1395	+|=(% style="width: 135px;" %)**Communication No.**|=(% style="width: 102px;" %)**Station No.**|=(% style="width: 185px;" %)**Control bit**|=(% style="width: 191px;" %)**Communication lamp**|=(% style="width: 271px;" %)**Description**
1013	1013	|(% colspan="1" rowspan="16" style="width:135px" %)1|(% style="width:102px" %)0~~15|(% style="width:185px" %)HSX550.0～HSX550.15|(% style="width:191px" %)HSX558.0～HSX558.15|(% rowspan="160" style="width:271px" %)Communication number refers to the number in "Communication Port Configuration". A number provides 256 device station numbers. Each station number corresponds to a communication control bit and a communication indicator bit. Registers HSX550.0 to HSX805.15 are used to control the station numbers from 0 to 127, and registers HSX1150.0 to HSX1405.15 are used to control station numbers 128 to 255.
1014	1014	|(% style="width:102px" %)16~~31|(% style="width:185px" %)HSX551.0～HSX551.15|(% style="width:191px" %)HSX559.0～HSX559.15
1015	1015	|(% style="width:102px" %)32~~47|(% style="width:185px" %)HSX552.0～HSX552.15|(% style="width:191px" %)HSX560.0～HSX560.15

6.png

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.Mora

Size

...	...	@@ -1,0 +1,1 @@
	1	+20.1 KB

Content