Skip to Content

Changes for page 13 HMI Internal Registers

Last modified by Jett on 2025/04/28 16:07
From version 30.1
edited by Mora Zhou
on 2023/10/31 14:57
Change comment: There is no comment for this version
To version 4.6
edited by Stone Wu
on 2022/08/06 14:21
Change comment: There is no comment for this version

Summary

Details

Page properties
Title
... ... @@ -1,1 +1,1 @@
1 -13.HMI Internal Registers
1 +12 HMI internal registers
Author
... ... @@ -1,1 +1,1 @@
1 -XWiki.Mora
1 +XWiki.Stone
Content
... ... @@ -4,11 +4,11 @@
4 4  
5 5  *HSW, HDW, HUW, HAW are word address, HSX, HDX, HUX, HAX are bit address.
6 6  
7 -* **System data area (HSW): **A special register defined by the system.
8 -* **Data storage area (HDW/HDX): **Users store user data.
9 -* **System data area (HUW): **A special register defined by the system.
10 -* **System Data (HAW)**: System register used for power-off save.
11 -* **Recipe index area (RPW): **System register used for recipe index.
7 +1. **System data area (HSW): **A special register defined by the system.
8 +1. **Data storage area (HDW/HDX): **Users store user data.
9 +1. **System data area (HUW): **A special register defined by the system.
10 +1. **System Data (HAW)**: System register used for power-off save.
11 +1. **Recipe index area (RPW): **System register used for recipe index.
12 12  
13 13  HMI internal registers are divided into bit address and word address, which can be accessed in two ways (take HDW as an example).
14 14  
... ... @@ -25,11 +25,6 @@
25 25  * The address of the bit address HDX is with a decimal point while word addresses are integers.
26 26  )))
27 27  
28 -= Address ranges table =
29 -
30 -(% style="text-align:center" %)
31 -[[image:6.png]]
32 -
33 33  = **Data storage area (HDW/HDX)** =
34 34  
35 35  It is used to save the temporary data of project.
... ... @@ -65,8 +65,8 @@
65 65  
66 66  It is used for system special registers (reserved by system).
67 67  
68 -1. Access as word, and serial number range is from HUW0 to HUW1599.
69 -1. Access as bit, and serial number range is from HUX0.0 to HUX1599.15.
63 +1. Access as word, and serial number range is from HUW0 to HUW199999.
64 +1. Access as bit, and serial number range is from HUX0.0 to HUX199999.15.
70 70  
71 71  **✎Note:**
72 72  
... ... @@ -140,8 +140,8 @@
140 140  (% class="table-bordered" style="width:1024px" %)
141 141  |=(% scope="row" style="width: 160px;" %)**Address**|=(% style="width: 282px;" %)**Function**|=(% style="width: 452px;" %)**Description**
142 142  |=(% style="width: 160px;" %)HSW0|(% style="width:282px" %)Language switch|(% style="width:452px" %)Multiple language could be set in the project, HMI support maximum 8 languages. (Power-down save supported)
143 -|=(% style="width: 160px;" %)HSW1|(% style="width:282px" %)Beep frequency (Only valid in HMI V1.0 System)|(% style="width:452px" %)Frequency range: 0~~4000
144 -|=(% style="width: 160px;" %)HSW2|(% style="width:282px" %)Beep volume (Only valid in HMI V1.0 System)|(% style="width:452px" %)Volume range: 0~~80
138 +|=(% style="width: 160px;" %)HSW1|(% style="width:282px" %)Beep frequency|(% style="width:452px" %)Frequency range: 0~~4000
139 +|=(% style="width: 160px;" %)HSW2|(% style="width:282px" %)Beep volume|(% style="width:452px" %)Volume range: 0~~80
145 145  |=(% style="width: 160px;" %)HSW3|(% style="width:282px" %)Beep time|(% style="width:452px" %)Unit: ms
146 146  |=(% style="width: 160px;" %)HSW4|(% style="width:282px" %)Beep whether enable or not|(% style="width:452px" %)(((
147 147  * =0: Enable.
... ... @@ -155,7 +155,7 @@
155 155  )))
156 156  |=(% style="width: 160px;" %)HSW6~~HSW7|(% style="width:282px" %)Number of alarms|(% style="width:452px" %)The number of alarm (it also includes the records of alarm confirmed)
157 157  |=(% style="width: 160px;" %)HSW8|(% style="width:282px" %)Number of unconfirmed history alarm|(% style="width:452px" %)The number of unconfirmed history alarm
158 -|=(% style="width: 160px;" %)HSW9|(% style="width:282px" %)Time out prompt|(% style="width:452px" %)(((
153 +|=(% style="width: 160px;" %)HSW9|(% style="width:282px" %)Time out tip|(% style="width:452px" %)(((
159 159  * =0: Enable
160 160  * =1: Disable
161 161  )))
... ... @@ -180,7 +180,6 @@
180 180  * =5: Friday.
181 181  * =6: Saturday.
182 182  )))
183 -|=(% style="width: 160px;" %)HSW39|(% style="width:282px" %)Beep type(Only valid in HMI V2.0 System)|(% style="width:452px" %)Type range: 1-5, Default is 1.
184 184  |=(% style="width: 160px;" %)HSW134|(% style="width:282px" %)(((
185 185  Whether the Script is read through
186 186  
... ... @@ -247,8 +247,8 @@
247 247  * =2: HSX521.1=1, delete all trend graph.
248 248  * =4: HSX521.2=1, delete all alarms.
249 249  * =16: HSX521.4=1, delete history XY plot.
250 -* =32: HSX521.5=1, delete data records in SD card or USB flash disk;(Please make a setting which is saved to USB flash disk or SD card in project setting).
251 -* =64: HSX521.6=1, delete alarms records in SD card or USB flash disk; (Please make a setting which is saved to USB flash disk or SD card in project setting).
244 +* =32: HSX521.5=1, delete data records in SD card or flash dish;(Please make a setting which is saved to flash disk or SD card in project setting).
245 +* =64: HSX521.6=1, delete alarms records in SD card or flash dish; (Please make a setting which is saved to flash disk or SD card in project setting).
252 252  )))
253 253  |=(% style="width: 160px;" %)HSW522|(% style="width:282px" %)Copy and paste the alarm/data files in flash to the USB flash disk|(% style="width:452px" %)(((
254 254  * =0: No operation
... ... @@ -456,7 +456,7 @@
456 456  Address mapping polling cycle, effective range: 40~~1000ms, default: 300ms.
457 457  
458 458  * When the set value is greater than 1000, the value is 1000.
459 -* When the set value is lower than 40, it changes to the default value 300
453 +* When the set value is greater than 1000, it changes to the default value 300
460 460  )))
461 461  |=(% style="width: 160px;" %)HSW1087|(% style="width:282px" %)Control write interval in address mapping|(% style="width:452px" %)(((
462 462  After reading data to the device for N times, Perform an address mapping write operation. N is the interval value. The effective range: 0~~5, and default is 2.
... ... @@ -491,8 +491,6 @@
491 491  * =0, Default value
492 492  * =1, Release the alarm generated before the last power-down when starting up
493 493  )))
494 -|=(% style="width: 160px;" %)HSW1200|(% colspan="1" rowspan="2" style="width:282px" %)TSAP settings for HMI in the Siemens LOGO! 8 protocol(ig series or HMI V2.0)|(% style="width:452px" %)HMI local TSAP, which corresponds to the remote TSAP of PLC
495 -|=(% style="width: 160px;" %)HSW1201|(% style="width:452px" %)HMI remote TSAP, which corresponds to the local TSAP of PLC
496 496  |=(% style="width: 160px;" %)HSW1450|(% style="width:282px" %)Enable objects level password function|(% style="width:452px" %)(((
497 497  * =0, Disable
498 498  * =1, Enable
... ... @@ -599,9 +599,6 @@
599 599  * =0: Server connection exception
600 600  * =1: Server connection is OK
601 601  )))
602 -|=(% style="width: 160px;" %)HSW1740|(% style="width:282px" %)Wi-fi signal strength|(% style="width:452px" %)(((
603 -Display the value of Wi-fi signal signal strength, ranges from 0~~100 (Signal strength is automatically obtained only once when HMI is powered on, and it will not be automatically updated. It needs to be used with the HSW1890)
604 -)))
605 605  |=(% style="width: 160px;" %)HSW1741|(% colspan="1" rowspan="12" style="width:282px" %)Related IP register in 4Gnetwork status (It is valid when HMI is connected to 4G)|(% style="width:452px" %)Local IP address high byte 1
606 606  |=(% style="width: 160px;" %)HSW1742|(% style="width:452px" %)Local IP address high byte 2
607 607  |=(% style="width: 160px;" %)HSW1743|(% style="width:452px" %)Local IP address high byte 3
... ... @@ -629,180 +629,10 @@
629 629  * =1: Server connection is OK
630 630  )))
631 631  |=(% style="width: 160px;" %)HSW1761|(% style="width:282px" %)Display 4G network signal strength|(% style="width:452px" %)Signal strength: 0~~31. The greater the value ,the signal is stronger
632 -|=(% style="width: 160px;" %)(((
633 -HSW1762
634 -)))|(% colspan="1" rowspan="13" style="width:282px" %)(((
635 -Note: Valid when Ethernet2 of HMI is plugged into the network cable.
636 -①、When the Ethernet setting is enabled in the project parameters, this register displays the set value.
637 -②. When the Ethernet setting is not enabled in the engineering parameters, the register displays the Ethernet IP automatically acquired by the HMI.
638 -③. When the HMI is not plugged into the network cable, the register will show 0 whether the engineering parameters are set or not.
639 -④.IP related registers can be read and written (only static IP mode can be written).
640 -)))|(% style="width:452px" %)(((
641 -Ethernet2 Local IP address high byte 1
642 -)))
643 -|=(% style="width: 160px;" %)(((
644 -HSW1763
645 -)))|(% style="width:452px" %)(((
646 -Ethernet2 Local IP address high byte 2
647 -)))
648 -|=(% style="width: 160px;" %)(((
649 -HSW1764
650 -)))|(% style="width:452px" %)(((
651 -Ethernet2 Local IP address high byte 3
652 -)))
653 -|=(% style="width: 160px;" %)(((
654 -HSW1765
655 -)))|(% style="width:452px" %)(((
656 -Ethernet2 Local IP address high byte 4
657 -)))
658 -|=(% style="width: 160px;" %)(((
659 -HSW1766
660 -)))|(% style="width:452px" %)(((
661 -Ethernet2 Local mask IP address high byte 1
662 -)))
663 -|=(% style="width: 160px;" %)(((
664 -HSW1767
665 -)))|(% style="width:452px" %)(((
666 -Ethernet2 Local mask IP address high byte 2
667 -)))
668 -|=(% style="width: 160px;" %)(((
669 -HSW1768
670 -)))|(% style="width:452px" %)Ethernet2 Local mask IP address high byte 3
671 -|=(% style="width: 160px;" %)HSW1769|(% style="width:452px" %)Ethernet2 Local mask IP address high byte 4
672 -|=(% style="width: 160px;" %)(((
673 -HSW1770
674 -)))|(% style="width:452px" %)(((
675 -Ethernet2 Local gateway IP address high byte 1
676 -)))
677 -|=(% style="width: 160px;" %)(((
678 -HSW1771
679 -)))|(% style="width:452px" %)(((
680 -Ethernet2 Local gateway IP address high byte 2
681 -)))
682 -|=(% style="width: 160px;" %)(((
683 -HSW1772
684 -)))|(% style="width:452px" %)(((
685 -Ethernet2 Local gateway IP address high byte 3
686 -)))
687 -|=(% style="width: 160px;" %)(((
688 -HSW1773
689 -)))|(% style="width:452px" %)(((
690 -Ethernet2 Local gateway IP address high byte 4
691 -)))
692 -|=(% style="width: 160px;" %)(((
693 -HSW1774
694 -)))|(% style="width:452px" %)(((
695 -Ethernet2 Local Port Address
696 -)))
697 -|=(% style="width: 160px;" %)(((
698 -HSW1775
699 -)))|(% colspan="1" rowspan="6" style="width:282px" %)(((
700 -①Display the MAC code of Ethernet2 NIC
701 -
702 -(hexadecimal display)
703 -
704 -②Read-only mode, not modifiable
705 -)))|(% style="width:452px" %)(((
706 -Ethernet2 Local MAC code high byte 1
707 -)))
708 -|=(% style="width: 160px;" %)(((
709 -HSW1776
710 -)))|(% style="width:452px" %)(((
711 -Ethernet2 Local MAC code high byte 2
712 -)))
713 -|=(% style="width: 160px;" %)(((
714 -HSW1777
715 -)))|(% style="width:452px" %)(((
716 -Ethernet2 Local MAC code high byte 3
717 -)))
718 -|=(% style="width: 160px;" %)(((
719 -HSW1778
720 -)))|(% style="width:452px" %)(((
721 -Ethernet2 Local MAC code high byte 4
722 -)))
723 -|=(% style="width: 160px;" %)(((
724 -HSW1779
725 -)))|(% style="width:452px" %)(((
726 -Ethernet2 Local MAC code high byte 5
727 -)))
728 -|=(% style="width: 160px;" %)(((
729 -HSW1780
730 -)))|(% style="width:452px" %)(((
731 -Ethernet2 Local MAC code high byte 6
732 -)))
733 -|=(% style="width: 160px;" %)(((
734 -HSW1781
735 -)))|(% colspan="1" rowspan="8" style="width:282px" %)(((
736 -①Display and modify DNS1 and DNS2 of Ethernet2
737 -
738 -②Related registers can be read and written mode (only static IP mode can be written)
739 -)))|(% style="width:452px" %)(((
740 -Ethernet2 Local DNS1 address high byte 1
741 -)))
742 -|=(% style="width: 160px;" %)(((
743 -HSW1782
744 -)))|(% style="width:452px" %)(((
745 -Ethernet2 Local DNS1 address high byte 2
746 -)))
747 -|=(% style="width: 160px;" %)(((
748 -HSW1783
749 -)))|(% style="width:452px" %)(((
750 -Ethernet2 Local DNS1 address high byte 3
751 -)))
752 -|=(% style="width: 160px;" %)(((
753 -HSW1784
754 -)))|(% style="width:452px" %)(((
755 -Ethernet2 Local DNS1 address high byte 4
756 -)))
757 -|=(% style="width: 160px;" %)(((
758 -HSW1785
759 -)))|(% style="width:452px" %)(((
760 -Ethernet2 Local DNS2 address high byte 1
761 -)))
762 -|=(% style="width: 160px;" %)(((
763 -HSW1786
764 -)))|(% style="width:452px" %)(((
765 -Ethernet2 Local DNS2 address high byte 2
766 -)))
767 -|=(% style="width: 160px;" %)(((
768 -HSW1787
769 -)))|(% style="width:452px" %)(((
770 -Ethernet2 Local DNS2 address high byte 3
771 -)))
772 -|=(% style="width: 160px;" %)(((
773 -HSW1788
774 -)))|(% style="width:452px" %)(((
775 -Ethernet2 Local DNS2 address high byte 4
776 -)))
777 -|=(% style="width: 160px;" %)(((
778 -HSW1789
779 -)))|(% colspan="1" style="width:282px" %)(((
780 -Display or set the dynamic or static IP mode of Ethernet2
781 -)))|(% style="width:452px" %)(((
782 -HSX1789.0 = 0, Static IP mode
783 -
784 -HSX1789.0 = 1, dynamic IP mode
785 -)))
786 -|=(% style="width: 160px;" %)(((
787 -HSW1790
788 -)))|(% colspan="1" style="width:282px" %)(((
789 -Confirm Ethernet2 IP, subnet mask, gateway, DNS1, DNS2, and dynamic static IP settings
790 -)))|(% style="width:452px" %)(((
791 -~= 1, confirm the setting (i.e., after modifying IP-related information, set this address to 1, representing confirmation of the modification, after which it will be reset to 0)
792 -)))
793 -|=(% style="width: 160px;" %)(((
794 -HSW1791
795 -)))|(% colspan="1" style="width:282px" %)(((
796 -Network status of the Ethernet2 connection server
797 -)))|(% style="width:452px" %)(((
798 -~= 0, connection to the server is abnormal = 1, connection to the server is normal
799 -)))
800 800  |=(% style="width: 160px;" %)HSW1852|(% style="width:282px" %)Control the interval in two consecutive clicks|(% style="width:452px" %)Limit range: 1~~500ms. The default is 100 ms.
801 801  |=(% style="width: 160px;" %)HSW1853|(% style="width:282px" %)File format for exporting data records to USB flash drive or SD card|(% style="width:452px" %)(((
802 802  * =0: db database
803 803  * =1: CSV
804 -
805 -(Only valid for script function DbToCsvFile)
806 806  )))
807 807  |=(% style="width: 160px;" %)HSW1854|(% style="width:282px" %)High and low word conversion type|(% style="width:452px" %)(((
808 808  * =0: use the old high-low word conversion (default)
... ... @@ -824,96 +824,30 @@
824 824  * =1: download firmware
825 825  * =2: enter the background
826 826  )))
827 -|=(% style="width: 160px;" %)HSW1865|(% style="width:282px" %)Priority connection to the cloud|(% style="width:452px" %)(((
828 -* =0: priority Ethernet
829 -* =1: priority WLAN
830 -* =2: priority 4G
646 +|=(% style="width: 160px;" %)HSW1866|(% style="width:282px" %)Delete the LUa extension module file|(% style="width:452px" %)(((
647 +* =1, delete;
648 +* = Others, do not delete
831 831  )))
832 -|=(% style="width: 160px;" %)HSW1866|(% style="width:282px" %)Delete the Lua extension module file|(% style="width:452px" %)(((
833 -* =0: delete;
834 -* = Others: do not delete
835 -)))
836 836  |=(% style="width: 160px;" %)HSW1867|(% style="width:282px" %)Reset mode|(% style="width:452px" %)(((
837 837  Monitor address is set during reset of reset switch, whether to cancel reset,
838 838  
839 -* = 0: yes (default);
840 -* = 1: no
653 +* = 0, yes (default);
654 +* = 1, no
841 841  )))
842 842  |=(% style="width: 160px;" %)HSW1868|(% style="width:282px" %)Double-click or long press the record type table mode|(% style="width:452px" %)(((
843 843  Controls whether the button pops up when double-clicking or long pressing on record type table object
844 844  
845 -* = 0: yes (default);
846 -* = 1: no
659 +* = 0, yes (default);
660 +* = 1, no
847 847  )))
848 -|=(% style="width: 160px;" %)(((
849 -HSW1869
850 -)))|(% style="width:282px" %)(((
851 -Dynamic screensaver countdown
852 -)))|(% style="width:452px" %)(((
853 -Countdown to enter dynamic screensaver effect, unit (S)
854 -)))
855 -|=(% style="width: 160px;" %)(((
856 -HSW1870
857 -)))|(% style="width:282px" %)(((
858 -Display or set the dynamic or static IP mode of Ethernet1
859 -)))|(% style="width:452px" %)(((
860 -HSX1870.0 = 0, Static IP mode
861 -
862 -HSX1870.0 = 1, dynamic IP mode
863 -)))
864 -|=(% style="width: 160px;" %)(((
865 -HSW1871
866 -)))|(% style="width:282px" %)(((
867 -Confirm the IP, subnet mask, gateway, DNS1, DNS2, and dynamic static IP settings for Ethernet1
868 -)))|(% style="width:452px" %)(((
869 -~= 1, confirm the setting (i.e., after modifying IP-related information, set this address to 1, representing confirmation of the modification, after which it will be reset to 0)
870 -)))
871 -|=(% style="width: 160px;" %)(((
872 -HSW1872
873 -)))|(% colspan="1" rowspan="8" style="width:282px" %)(((
874 -①Display and modify DNS1 and DNS2 of Ethernet1
875 -
876 -②Related registers can be read and written mode (only static IP mode can be written)
877 -)))|(% style="width:452px" %)(((
878 -Ethernet1 Local DNS1 address high byte 1
879 -)))
880 -|=(% style="width: 160px;" %)(((
881 -HSW1873
882 -)))|(% style="width:452px" %)Ethernet1 Local DNS1 address high byte 2
883 -|=(% style="width: 160px;" %)(((
884 -HSW1874
885 -)))|(% style="width:452px" %)Ethernet1 Local DNS1 address high byte 3
886 -|=(% style="width: 160px;" %)(((
887 -HSW1875
888 -)))|(% style="width:452px" %)Ethernet1 Local DNS1 address high byte 4
889 -|=(% style="width: 160px;" %)(((
890 -HSW1876
891 -)))|(% style="width:452px" %)Ethernet1 Local DNS2 address high byte 1
892 -|=(% style="width: 160px;" %)(((
893 -HSW1877
894 -)))|(% style="width:452px" %)Ethernet1 Local DNS2 address high byte 2
895 -|=(% style="width: 160px;" %)(((
896 -HSW1878
897 -)))|(% style="width:452px" %)Ethernet1 Local DNS2 address high byte 3
898 -|=(% style="width: 160px;" %)(((
899 -HSW1879
900 -)))|(% style="width:452px" %)Ethernet1 Local DNS2 address high byte 4
901 -|=(% style="width: 160px;" %)HSW1890|(% colspan="1" style="width:282px" %)Enable refresh current network signal|(% style="width:452px" %)(((
902 -* =1: Refresh the network signal once after triggered (This register will be automatically reset after triggered, only update the signal value once after per 15 seconds, not able to update twice in the short interval)
903 -* =Others: not refresh
904 -)))
905 -|=(% style="width: 160px;" %)HSW1891|(% colspan="1" style="width:282px" %)Enable clear cache for screen data  |(% style="width:452px" %)(((
906 -* =1, not clear screen cache when switch language
907 -* =2, trigger clear cache of all screens for once time
908 -* =3, always clear cache of all screen data
909 -)))
910 910  |=(% style="width: 160px;" %)HSW10000~~19999|(% style="width:282px" %)Power-down storage area|(% style="width:452px" %)After restart, the data remains
911 911  |=(% style="width: 160px;" %)HSW10035|(% rowspan="13" style="width:282px" %)(((
912 -Note: Valid when Ethernet1 of HMI is plugged into the network cable.
913 -① When the Ethernet setting is enabled in the project parameters, this register displays the set value.
914 -② When the Ethernet setting is not enabled in the engineering parameters, the register displays the Ethernet IP automatically acquired by the HMI.
915 -③ When the HMI is not plugged into the network cable, the register will show 0 whether the engineering parameters are set or not.
916 -④ IP related registers can be read and written (only static IP mode can be written).
664 +**✎Note: **Only valid when the HMI is plugged into the Ethernet cable.
665 +
666 +1. If Ethernet settings is enabled in project parameters, this register displays the set value.
667 +1. If Ethernet settings is not enabled in project parameters, IP would automatically obtained IP.
668 +1. If HMI is not connected to the network, the register is displayed as 0 whether the engineering parameters are set.
669 +1. 4. All IP registers of HMI are read-only.
917 917  )))|(% style="width:452px" %)Local IP address high byte 1
918 918  |=(% style="width: 160px;" %)HSW10036|(% style="width:452px" %)Local IP address high byte 2
919 919  |=(% style="width: 160px;" %)HSW10037|(% style="width:452px" %)Local IP address high byte 3
... ... @@ -928,11 +928,9 @@
928 928  |=(% style="width: 160px;" %)HSW10046|(% style="width:452px" %)Local gateway address high byte 4
929 929  |=(% style="width: 160px;" %)HSW10047|(% style="width:452px" %)Local port address
930 930  |=(% style="width: 160px;" %)HSW10048|(% rowspan="6" style="width:282px" %)(((
931 -①Display the MAC code of Ethernet1 NIC
684 +Displays the MAC code of the current network card
932 932  
933 -(hexadecimal display)
934 -
935 -②Read-only mode, not modifiable
686 +(Hexadecimal display)
936 936  )))|(% style="width:452px" %)Local MAC code high word 1
937 937  |=(% style="width: 160px;" %)HSW10049|(% style="width:452px" %)Local MAC code high word 2
938 938  |=(% style="width: 160px;" %)HSW10050|(% style="width:452px" %)Local MAC code high word 3
... ... @@ -939,7 +939,7 @@
939 939  |=(% style="width: 160px;" %)HSW10051|(% style="width:452px" %)Local MAC code high word 4
940 940  |=(% style="width: 160px;" %)HSW10052|(% style="width:452px" %)Local MAC code high word 5
941 941  |=(% style="width: 160px;" %)HSW10053|(% style="width:452px" %)Local MAC code high word 6
942 -|=(% style="width: 160px;" %)HSW10118|(% colspan="1" rowspan="2" style="width:282px" %)TSAP settings for HMI in the Siemens LOGO! 8 protocol|(% style="width:452px" %)HMI local TSAP, which corresponds to the remote TSAP of PLC
693 +|=(% style="width: 160px;" %)HSW10118|(% colspan="1" rowspan="2" style="width:282px" %)TSAP settings for HMI in the Siemens logo! 8 protocol|(% style="width:452px" %)HMI local TSAP, which corresponds to the remote TSAP of PLC
943 943  |=(% style="width: 160px;" %)HSW10119|(% style="width:452px" %)HMI remote TSAP, which corresponds to the local TSAP of PLC
944 944  |=(% style="width: 160px;" %)HSW10461~~10493|(% style="width:282px" %)Remote access password|(% style="width:452px" %)8-character remote access password
945 945  |=(% style="width: 160px;" %)HSW10494~~10558|(% style="width:282px" %)Machine ID (Read only)|(% style="width:452px" %)Machine ID for remote access (read only 64-bit)
... ... @@ -1007,7 +1007,6 @@
1007 1007  * =0: LAN or the external network both OK
1008 1008  * =1: Only LAN access
1009 1009  * =2: Only external network can access
1010 -* =3: Close the functions
1011 1011  )))
1012 1012  |=(% style="width: 160px;" %)HSW11757|(% style="width:282px" %)Enable the valid date of the dynamic installment password|(% style="width:452px" %)(((
1013 1013  * =0: Disabled
... ... @@ -1022,38 +1022,11 @@
1022 1022  )))
1023 1023  |=(% style="width: 160px;" %)HSW11760|(% style="width:282px" %)Screensaver countdown|(% style="width:452px" %)Display the countdown to enter the Screensaver, unit: second.
1024 1024  |=(% style="width: 160px;" %)HSW11761|(% style="width:282px" %)Screensaver screen number|(% style="width:452px" %)Set the screen number for Screensaver
1025 -|=(% style="width: 160px;" %)(((
1026 -HSW11762
1027 -)))|(% style="width:282px" %)(((
1028 -Dynamic screensaver control address
1029 -)))|(% style="width:452px" %)(((
1030 -HSX11762.0=0, initialize with project configuration;
1031 1031  
1032 -HSX11762.0=1, initialize with special register configuration;
776 +== **Serial port communication configuration** ==
1033 1033  
1034 -HSX11762.1=0, disable dynamic screensaver;
1035 -
1036 -HSX11762.1=1, enable dynamic screensaver
1037 -)))
1038 -|=(% style="width: 160px;" %)(((
1039 -HSW11763
1040 -)))|(% style="width:282px" %)(((
1041 -Waiting time to enter the dynamic screensaver
1042 -)))|(% style="width:452px" %)(((
1043 -Waiting time when the screen is not operated, range 1~~720 minutes
1044 -)))
1045 -|=(% style="width: 160px;" %)(((
1046 -HSW11764
1047 -)))|(% style="width:282px" %)(((
1048 -Animated screensaver animation type
1049 -)))|(% style="width:452px" %)(((
1050 -~=0: Raster,=1: Blinds,=2: Bubble
1051 -)))
1052 -
1053 -== Serial port communication configuration ==
1054 -
1055 1055  (% class="table-bordered" %)
1056 -|=(% scope="row" style="width: 102px;" %)Port|=(% style="width: 173px;" %)**Function**|=(% style="width: 122px;" %)**Address**|=(% colspan="2" style="width: 506px;" %)**Description**
779 +|=(% style="width: 102px;" %)Port|=(% style="width: 173px;" %)**Function**|=(% style="width: 122px;" %)**Address**|=(% colspan="2" style="width: 506px;" %)**Description**
1057 1057  |(% colspan="1" rowspan="11" style="width:102px" %)COM1|(% style="width:173px" %)Communication mode|(% style="width:122px" %)HSW10061|(% colspan="2" style="width:506px" %)(((
1058 1058  * =0: RS232
1059 1059  * =1: RS485
... ... @@ -1083,22 +1083,10 @@
1083 1083  * =1: ODD
1084 1084  * =2: EVEN
1085 1085  )))
1086 -|(% style="width:173px" %)Wait timeout|(% style="width:122px" %)HSW10066|(% colspan="2" style="width:506px" %)(((
1087 -* Unit: ms.
1088 -* Range: 0 to 30000
1089 -)))
1090 -|(% style="width:173px" %)reveive timeout|(% style="width:122px" %)HSW10067|(% colspan="2" style="width:506px" %)(((
1091 -* Unit: ms.
1092 -* Range: 0 to 30000
1093 -)))
1094 -|(% style="width:173px" %)Retry time|(% style="width:122px" %)HSW10068|(% colspan="2" style="width:506px" %)(((
1095 -* Unit: times.
1096 -* Range: 0 to 100
1097 -)))
1098 -|(% style="width:173px" %)Retry timeout|(% style="width:122px" %)HSW10069|(% colspan="2" style="width:506px" %)(((
1099 -* Unit: s.
1100 -* Range: 0 to 300
1101 -)))
809 +|(% style="width:173px" %)Wait timeout|(% style="width:122px" %)HSW10066|(% colspan="2" style="width:506px" %)Unit: ms. Range: 0~~30000
810 +|(% style="width:173px" %)reveive timeout|(% style="width:122px" %)HSW10067|(% colspan="2" style="width:506px" %)Unit: ms. Range: 0~~30000
811 +|(% style="width:173px" %)Retry time|(% style="width:122px" %)HSW10068|(% colspan="2" style="width:506px" %)Unit: times. Range: 0~~100
812 +|(% style="width:173px" %)Retry timeout|(% style="width:122px" %)HSW10069|(% colspan="2" style="width:506px" %)Unit: s. Range: 0~~300
1102 1102  |(% style="width:173px" %)HMI station number|(% style="width:122px" %)HSW10070|(% colspan="2" style="width:506px" %)
1103 1103  |(% style="width:173px" %)PLC station number|(% style="width:122px" %)HSW10071|(% colspan="2" style="width:506px" %)
1104 1104  |(% colspan="1" rowspan="11" style="width:102px" %)COM1-2|(% style="width:173px" %)Communication mode|(% style="width:122px" %)HSW10094|(% colspan="2" style="width:506px" %)(((
... ... @@ -1131,22 +1131,10 @@
1131 1131  * =1: ODD
1132 1132  * =2: EVEN
1133 1133  )))
1134 -|(% style="width:173px" %)Wait timeout|(% style="width:122px" %)HSW10099|(% colspan="2" style="width:506px" %)(((
1135 -* Unit: ms.
1136 -* Range: 0 to 30000
1137 -)))
1138 -|(% style="width:173px" %)receive timeout|(% style="width:122px" %)HSW10100|(% colspan="2" style="width:506px" %)(((
1139 -* Unit: ms.
1140 -* Range: 0 to 30000
1141 -)))
1142 -|(% style="width:173px" %)Retry time|(% style="width:122px" %)HSW10101|(% colspan="2" style="width:506px" %)(((
1143 -* Unit: times.
1144 -* Range: 0 to 100
1145 -)))
1146 -|(% style="width:173px" %)Retry timeout|(% style="width:122px" %)HSW10102|(% colspan="2" style="width:506px" %)(((
1147 -* Unit: s.
1148 -* Range: 0 to 30
1149 -)))
845 +|(% style="width:173px" %)Wait timeout|(% style="width:122px" %)HSW10099|(% colspan="2" style="width:506px" %)Unit: ms. Range: 0~~30000
846 +|(% style="width:173px" %)receive timeout|(% style="width:122px" %)HSW10100|(% colspan="2" style="width:506px" %)Unit: ms. Range: 0~~30000
847 +|(% style="width:173px" %)Retry time|(% style="width:122px" %)HSW10101|(% colspan="2" style="width:506px" %)Unit: times. Range: 0~~100
848 +|(% style="width:173px" %)Retry timeout|(% style="width:122px" %)HSW10102|(% colspan="2" style="width:506px" %)Unit: s. Range: 0~~30
1150 1150  |(% style="width:173px" %)HMI station number|(% style="width:122px" %)HSW10103|(% colspan="2" style="width:506px" %)
1151 1151  |(% style="width:173px" %)PLC station number|(% style="width:122px" %)HSW10104|(% colspan="2" style="width:506px" %)
1152 1152  |(% colspan="1" rowspan="11" style="width:102px" %)COM1-3|(% style="width:173px" %)Communication mode|(% style="width:122px" %)HSW10120|(% colspan="2" style="width:506px" %)(((
... ... @@ -1179,22 +1179,10 @@
1179 1179  * =1: ODD
1180 1180  * =2: EVEN
1181 1181  )))
1182 -|(% style="width:173px" %)Wait timeout|(% style="width:122px" %)HSW10125|(% colspan="2" style="width:506px" %)(((
1183 -* Unit: ms.
1184 -* Range: 0 to 30000
1185 -)))
1186 -|(% style="width:173px" %)receive timeout|(% style="width:122px" %)HSW10126|(% colspan="2" style="width:506px" %)(((
1187 -* Unit: ms.
1188 -* Range: 0 to 30000
1189 -)))
1190 -|(% style="width:173px" %)Retry time|(% style="width:122px" %)HSW10127|(% colspan="2" style="width:506px" %)(((
1191 -* Unit: times.
1192 -* Range: 0 to 100
1193 -)))
1194 -|(% style="width:173px" %)Retry timeout|(% style="width:122px" %)HSW10128|(% colspan="2" style="width:506px" %)(((
1195 -* Unit: s.
1196 -* Range: 0 to 30
1197 -)))
881 +|(% style="width:173px" %)Wait timeout|(% style="width:122px" %)HSW10125|(% colspan="2" style="width:506px" %)Unit: ms. Range: 0~~30000
882 +|(% style="width:173px" %)receive timeout|(% style="width:122px" %)HSW10126|(% colspan="2" style="width:506px" %)Unit: ms. Range: 0~~30000
883 +|(% style="width:173px" %)Retry time|(% style="width:122px" %)HSW10127|(% colspan="2" style="width:506px" %)Unit: times. Range: 0~~100
884 +|(% style="width:173px" %)Retry timeout|(% style="width:122px" %)HSW10128|(% colspan="2" style="width:506px" %)Unit: s. Range: 0~~30
1198 1198  |(% style="width:173px" %)HMI station number|(% style="width:122px" %)HSW10129|(% colspan="2" style="width:506px" %)
1199 1199  |(% style="width:173px" %)PLC station number|(% style="width:122px" %)HSW10130|(% colspan="2" style="width:506px" %)
1200 1200  |(% colspan="1" rowspan="11" style="width:102px" %)COM2|(% style="width:173px" %)Communication mode|(% style="width:122px" %)HSW10072|(% colspan="2" style="width:506px" %)(((
... ... @@ -1225,22 +1225,10 @@
1225 1225  * =1: ODD
1226 1226  * =2: EVEN
1227 1227  )))
1228 -|(% style="width:173px" %)Wait timeout|(% style="width:122px" %)HSW10077|(% colspan="2" style="width:506px" %)(((
1229 -* Unit: ms.
1230 -* Range: 0 to 30000
1231 -)))
1232 -|(% style="width:173px" %)receive timeout|(% style="width:122px" %)HSW10078|(% colspan="2" style="width:506px" %)(((
1233 -* Unit: ms.
1234 -* Range: 0 to 30000
1235 -)))
1236 -|(% style="width:173px" %)Retry time|(% style="width:122px" %)HSW10079|(% colspan="2" style="width:506px" %)(((
1237 -* Unit: times.
1238 -* Range: 0 to 100
1239 -)))
1240 -|(% style="width:173px" %)Retry timeout|(% style="width:122px" %)HSW10080|(% colspan="2" style="width:506px" %)(((
1241 -* Unit: s.
1242 -* Range: 0 to 30
1243 -)))
915 +|(% style="width:173px" %)Wait timeout|(% style="width:122px" %)HSW10077|(% colspan="2" style="width:506px" %)Unit: ms. Range: 0~~30000
916 +|(% style="width:173px" %)receive timeout|(% style="width:122px" %)HSW10078|(% colspan="2" style="width:506px" %)Unit: ms. Range: 0~~30000
917 +|(% style="width:173px" %)Retry time|(% style="width:122px" %)HSW10079|(% colspan="2" style="width:506px" %)Unit: times. Range: 0~~100
918 +|(% style="width:173px" %)Retry timeout|(% style="width:122px" %)HSW10080|(% colspan="2" style="width:506px" %)Unit: s. Range: 0~~30
1244 1244  |(% style="width:173px" %)HMI station number|(% style="width:122px" %)HSW10081|(% colspan="2" style="width:506px" %)
1245 1245  |(% style="width:173px" %)PLC station number|(% style="width:122px" %)HSW10082|(% colspan="2" style="width:506px" %)
1246 1246  |(% colspan="1" rowspan="11" style="width:102px" %)COM2-2|(% style="width:173px" %)Communication mode|(% style="width:122px" %)HSW10105|(% colspan="2" style="width:506px" %)(((
... ... @@ -1271,22 +1271,10 @@
1271 1271  * =1: ODD
1272 1272  * =2: EVEN
1273 1273  )))
1274 -|(% style="width:173px" %)Wait timeout|(% style="width:122px" %)HSW10110|(% colspan="2" style="width:506px" %)(((
1275 -* Unit: ms.
1276 -* Range: 0 to 30000
1277 -)))
1278 -|(% style="width:173px" %)receive timeout|(% style="width:122px" %)HSW10111|(% colspan="2" style="width:506px" %)(((
1279 -* Unit: ms.
1280 -* Range: 0 to 30000
1281 -)))
1282 -|(% style="width:173px" %)Retry time|(% style="width:122px" %)HSW10112|(% colspan="2" style="width:506px" %)(((
1283 -* Unit: times.
1284 -* Range: 0 to 100
1285 -)))
1286 -|(% style="width:173px" %)Retry timeout|(% style="width:122px" %)HSW10113|(% colspan="2" style="width:506px" %)(((
1287 -* Unit: s.
1288 -* Range: 0 to 30
1289 -)))
949 +|(% style="width:173px" %)Wait timeout|(% style="width:122px" %)HSW10110|(% colspan="2" style="width:506px" %)Unit: ms. Range: 0~~30000
950 +|(% style="width:173px" %)receive timeout|(% style="width:122px" %)HSW10111|(% colspan="2" style="width:506px" %)Unit: ms. Range: 0~~30000
951 +|(% style="width:173px" %)Retry time|(% style="width:122px" %)HSW10112|(% colspan="2" style="width:506px" %)Unit: times. Range: 0~~100
952 +|(% style="width:173px" %)Retry timeout|(% style="width:122px" %)HSW10113|(% colspan="2" style="width:506px" %)Unit: s. Range: 0~~30
1290 1290  |(% style="width:173px" %)HMI station number|(% style="width:122px" %)HSW10114|(% colspan="2" style="width:506px" %)
1291 1291  |(% style="width:173px" %)PLC station number|(% style="width:122px" %)HSW10115|(% colspan="2" style="width:506px" %)
1292 1292  |(% colspan="1" rowspan="11" style="width:102px" %)COM3|(% style="width:173px" %)Communication mode|(% style="width:122px" %)HSW10083|(% colspan="2" style="width:506px" %)(((
... ... @@ -1316,48 +1316,29 @@
1316 1316  * =1: ODD
1317 1317  * =2: EVEN
1318 1318  )))
1319 -|(% style="width:173px" %)Wait timeout|(% style="width:122px" %)HSW10088|(% colspan="2" style="width:506px" %)(((
1320 -* Unit: ms.
1321 -* Range: 0 to 30000
1322 -)))
1323 -|(% style="width:173px" %)receive timeout|(% style="width:122px" %)HSW10089|(% colspan="2" style="width:506px" %)(((
1324 -* Unit: ms.
1325 -* Range: 0 to 30000
1326 -)))
1327 -|(% style="width:173px" %)Retry time|(% style="width:122px" %)HSW10090|(% colspan="2" style="width:506px" %)(((
1328 -* Unit: times.
1329 -* Range: 0 to 100
1330 -)))
1331 -|(% style="width:173px" %)Retry timeout|(% style="width:122px" %)HSW10091|(% colspan="2" style="width:506px" %)(((
1332 -* Unit: s.
1333 -* Range: 0 to 30
1334 -)))
982 +|(% style="width:173px" %)Wait timeout|(% style="width:122px" %)HSW10088|(% colspan="2" style="width:506px" %)Unit: ms. Range: 0~~30000
983 +|(% style="width:173px" %)receive timeout|(% style="width:122px" %)HSW10089|(% colspan="2" style="width:506px" %)Unit: ms. Range: 0~~30000
984 +|(% style="width:173px" %)Retry time|(% style="width:122px" %)HSW10090|(% colspan="2" style="width:506px" %)Unit: times. Range: 0~~100
985 +|(% style="width:173px" %)Retry timeout|(% style="width:122px" %)HSW10091|(% colspan="2" style="width:506px" %)Unit: s. Range: 0~~30
1335 1335  |(% style="width:173px" %)HMI station number|(% style="width:122px" %)HSW10092|(% colspan="2" style="width:506px" %)
1336 1336  |(% style="width:173px" %)PLC station number|(% style="width:122px" %)HSW10093|(% colspan="2" style="width:506px" %)
1337 1337  |(% colspan="1" rowspan="2" style="width:102px" %)CAN port|(% style="width:173px" %)CAN1 baud rate|(% style="width:122px" %)HSW010116|(% style="width:299px" %)(((
1338 -Unit: K, the baud rate must be an integer.
1339 -
1340 -For example, when the baud rate required is 250000, just enter 250.
989 +Unit: K, the baud rate must be an integer, for example, when the baud rate required is 250000, just enter 250.
1341 1341  )))|(% colspan="1" rowspan="2" style="width:218px" %)**✎Note: **If baud rate has been modified,please wait 5 seconds,then restart the HMI to take effect.
1342 -|(% style="width:173px" %)CAN2 baud rate|(% style="width:122px" %)HSW010117|(% style="width:299px" %)(((
1343 -Unit: K, the baud rate must be an integer.
991 +|(% style="width:173px" %)CAN2 baud rate|(% style="width:122px" %)HSW010117|(% style="width:299px" %)Unit: K, the baud rate must be an integer, for example, when the baud rate required is 250000, just enter 250.
1344 1344  
1345 -For example, when the baud rate required is 250000, just enter 250.
1346 -)))
993 +== **Ethernet communication configuration** ==
1347 1347  
1348 -== Ethernet communication configuration ==
1349 -
1350 1350  (% class="table-bordered" %)
1351 -|(% style="width:40px" %)**No.**|(% style="width:295px" %)**Function**|(% style="width:220px" %)**Address**|(% style="width:336px" %)**Description**
996 +|=(% style="width: 40px;" %)**No.**|=(% style="width: 295px;" %)**Function**|=(% style="width: 220px;" %)**Address**|=(% style="width: 336px;" %)**Description**
1352 1352  |(% rowspan="7" style="width:40px" %)1|(% colspan="1" rowspan="7" style="width:295px" %)Ethernet parameter configuration for communication number 1 in list. Configure those addresses according to connected device. After configuration, wait for 5 seconds and restart the HMI.|(% style="width:220px" %)HSW11004|(% style="width:336px" %)Device IP address high word 1
1353 1353  |(% style="width:220px" %)HSW11005|(% style="width:336px" %)Device IP address high word 2
1354 1354  |(% style="width:220px" %)HSW11006|(% style="width:336px" %)Device IP address high word 3
1355 1355  |(% style="width:220px" %)HSW11007|(% style="width:336px" %)Device IP address high word 4
1356 1356  |(% style="width:220px" %)HSW11008|(% style="width:336px" %)Device Port number
1357 -|(% style="width:220px" %)HSW11009|(% style="width:336px" %)(((
1358 -~=2 TCP
1359 -
1360 -~=3 UDP
1002 +|(% style="width:220px" %)HSW11009|=(% style="width: 336px;" %)(((
1003 +* =2 TCP
1004 +* =3 UDP
1361 1361  )))
1362 1362  |(% style="width:220px" %)HSW11010|(% style="width:336px" %)Reserved
1363 1363  |(% rowspan="7" style="width:40px" %)2|(% colspan="1" rowspan="7" style="width:295px" %)Ethernet parameter configuration for communication number 2 in list. Configure those addresses according to connected device. After configuration, wait for 5 seconds and restart the HMI.|(% style="width:220px" %)HSW11011|(% style="width:336px" %)Device IP address high word 1
... ... @@ -1365,10 +1365,9 @@
1365 1365  |(% style="width:220px" %)HSW11013|(% style="width:336px" %)Device IP address high word 3
1366 1366  |(% style="width:220px" %)HSW11014|(% style="width:336px" %)Device IP address high word 4
1367 1367  |(% style="width:220px" %)HSW11015|(% style="width:336px" %)Device Port number
1368 -|(% style="width:220px" %)HSW11016|(% style="width:336px" %)(((
1369 -~=2 TCP
1370 -
1371 -~=3 UDP
1012 +|(% style="width:220px" %)HSW11016|=(% style="width: 336px;" %)(((
1013 +* =2 TCP
1014 +* =3 UDP
1372 1372  )))
1373 1373  |(% style="width:220px" %)HSW11017|(% style="width:336px" %)Reserved
1374 1374  |(% style="width:40px" %)…|(% style="width:295px" %) |(% style="width:220px" %)…|(% style="width:336px" %)…
... ... @@ -1377,11 +1377,7 @@
1377 1377  |(% style="width:220px" %)HSW11223|(% style="width:336px" %)Device IP address high word 3
1378 1378  |(% style="width:220px" %)HSW11224|(% style="width:336px" %)Device IP address high word 4
1379 1379  |(% style="width:220px" %)HSW11225|(% style="width:336px" %)Device Port number
1380 -|(% style="width:220px" %)HSW11226|(% style="width:336px" %)(((
1381 -~=2 TCP;
1382 -
1383 -~=3 UDP
1384 -)))
1023 +|(% style="width:220px" %)HSW11226|=(% style="width: 336px;" %)2 TCP; =3 UDP
1385 1385  |(% style="width:220px" %)HSW11227|(% style="width:336px" %)Reserved
1386 1386  
1387 1387  (% class="box infomessage" %)
... ... @@ -1389,7 +1389,7 @@
1389 1389  **✎Note:** The number of Ethernet connections supported by different HMI series varies.
1390 1390  )))
1391 1391  
1392 -== Communication control ==
1031 +== **Communication control** ==
1393 1393  
1394 1394  (% class="table-bordered" %)
1395 1395  |=(% style="width: 135px;" %)**Communication No.**|=(% style="width: 102px;" %)**Station No.**|=(% style="width: 185px;" %)**Control bit**|=(% style="width: 191px;" %)**Communication lamp**|=(% style="width: 271px;" %)**Description**
6.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Mora
Size
... ... @@ -1,1 +1,0 @@
1 -20.1 KB
Content