Skip to Content

Changes for page 13 HMI Internal Registers

Last modified by Jett on 2025/04/28 16:07
From version 32.1
edited by Mora Zhou
on 2023/11/21 16:20
Change comment: There is no comment for this version
To version 10.1
edited by Theodore Xu
on 2022/12/16 10:09
Change comment: There is no comment for this version

Summary

Details

Page properties
Title
... ... @@ -1,1 +1,1 @@
1 -13.HMI Internal Registers
1 +12 HMI internal registers
Author
... ... @@ -1,1 +1,1 @@
1 -XWiki.Mora
1 +XWiki.AiXia
Content
... ... @@ -25,11 +25,6 @@
25 25  * The address of the bit address HDX is with a decimal point while word addresses are integers.
26 26  )))
27 27  
28 -= Address ranges table =
29 -
30 -(% style="text-align:center" %)
31 -[[image:6.png]]
32 -
33 33  = **Data storage area (HDW/HDX)** =
34 34  
35 35  It is used to save the temporary data of project.
... ... @@ -56,27 +56,21 @@
56 56  
57 57  It is system recipe data power-off save register. The range is from RPW000000 to RPW990450.
58 58  
59 -(% class="box infomessage" %)
60 -(((
61 61  **✎Note:**
62 62  
63 63  * RPW is power-down retention. The register of this type is able to save the data before the power-down.
64 64  * To avoid possible device failure, do not immediately power off and reboot when configuring the power-down save addre
65 -)))
66 66  
67 67  = **Single user data area (HUW/HUX)** =
68 68  
69 69  It is used for system special registers (reserved by system).
70 70  
71 -1. Access as word, and serial number range is from HUW0 to HUW1599.
72 -1. Access as bit, and serial number range is from HUX0.0 to HUX1599.15.
63 +1. Access as word, and serial number range is from HUW0 to HUW199999.
64 +1. Access as bit, and serial number range is from HUX0.0 to HUX199999.15.
73 73  
74 -(% class="box infomessage" %)
75 -(((
76 76  **✎Note:**
77 77  
78 78  * HUW/HUX is a system special register, so please check the system special register list during use. Please use the address specified in the table and do not use the address which is not mentioned in the table.
79 -)))
80 80  
81 81  (% class="table-bordered" %)
82 82  |=**Special register address**|=**Description**|=**Function**
... ... @@ -146,8 +146,8 @@
146 146  (% class="table-bordered" style="width:1024px" %)
147 147  |=(% scope="row" style="width: 160px;" %)**Address**|=(% style="width: 282px;" %)**Function**|=(% style="width: 452px;" %)**Description**
148 148  |=(% style="width: 160px;" %)HSW0|(% style="width:282px" %)Language switch|(% style="width:452px" %)Multiple language could be set in the project, HMI support maximum 8 languages. (Power-down save supported)
149 -|=(% style="width: 160px;" %)HSW1|(% style="width:282px" %)Beep frequency (Only valid in HMI V1.0 System)|(% style="width:452px" %)Frequency range: 0~~4000
150 -|=(% style="width: 160px;" %)HSW2|(% style="width:282px" %)Beep volume (Only valid in HMI V1.0 System)|(% style="width:452px" %)Volume range: 0~~80
138 +|=(% style="width: 160px;" %)HSW1|(% style="width:282px" %)Beep frequency|(% style="width:452px" %)Frequency range: 0~~4000
139 +|=(% style="width: 160px;" %)HSW2|(% style="width:282px" %)Beep volume|(% style="width:452px" %)Volume range: 0~~80
151 151  |=(% style="width: 160px;" %)HSW3|(% style="width:282px" %)Beep time|(% style="width:452px" %)Unit: ms
152 152  |=(% style="width: 160px;" %)HSW4|(% style="width:282px" %)Beep whether enable or not|(% style="width:452px" %)(((
153 153  * =0: Enable.
... ... @@ -161,7 +161,7 @@
161 161  )))
162 162  |=(% style="width: 160px;" %)HSW6~~HSW7|(% style="width:282px" %)Number of alarms|(% style="width:452px" %)The number of alarm (it also includes the records of alarm confirmed)
163 163  |=(% style="width: 160px;" %)HSW8|(% style="width:282px" %)Number of unconfirmed history alarm|(% style="width:452px" %)The number of unconfirmed history alarm
164 -|=(% style="width: 160px;" %)HSW9|(% style="width:282px" %)Time out prompt|(% style="width:452px" %)(((
153 +|=(% style="width: 160px;" %)HSW9|(% style="width:282px" %)Time out tip|(% style="width:452px" %)(((
165 165  * =0: Enable
166 166  * =1: Disable
167 167  )))
... ... @@ -186,7 +186,6 @@
186 186  * =5: Friday.
187 187  * =6: Saturday.
188 188  )))
189 -|=(% style="width: 160px;" %)HSW39|(% style="width:282px" %)Beep type(Only valid in HMI V2.0 System)|(% style="width:452px" %)Type range: 1-5, Default is 1.
190 190  |=(% style="width: 160px;" %)HSW134|(% style="width:282px" %)(((
191 191  Whether the Script is read through
192 192  
... ... @@ -253,8 +253,8 @@
253 253  * =2: HSX521.1=1, delete all trend graph.
254 254  * =4: HSX521.2=1, delete all alarms.
255 255  * =16: HSX521.4=1, delete history XY plot.
256 -* =32: HSX521.5=1, delete data records in SD card or USB flash disk;(Please make a setting which is saved to USB flash disk or SD card in project setting).
257 -* =64: HSX521.6=1, delete alarms records in SD card or USB flash disk; (Please make a setting which is saved to USB flash disk or SD card in project setting).
244 +* =32: HSX521.5=1, delete data records in SD card or flash dish;(Please make a setting which is saved to flash disk or SD card in project setting).
245 +* =64: HSX521.6=1, delete alarms records in SD card or flash dish; (Please make a setting which is saved to flash disk or SD card in project setting).
258 258  )))
259 259  |=(% style="width: 160px;" %)HSW522|(% style="width:282px" %)Copy and paste the alarm/data files in flash to the USB flash disk|(% style="width:452px" %)(((
260 260  * =0: No operation
... ... @@ -462,7 +462,7 @@
462 462  Address mapping polling cycle, effective range: 40~~1000ms, default: 300ms.
463 463  
464 464  * When the set value is greater than 1000, the value is 1000.
465 -* When the set value is lower than 40, it changes to the default value 300
453 +* When the set value is greater than 1000, it changes to the default value 300
466 466  )))
467 467  |=(% style="width: 160px;" %)HSW1087|(% style="width:282px" %)Control write interval in address mapping|(% style="width:452px" %)(((
468 468  After reading data to the device for N times, Perform an address mapping write operation. N is the interval value. The effective range: 0~~5, and default is 2.
... ... @@ -497,8 +497,6 @@
497 497  * =0, Default value
498 498  * =1, Release the alarm generated before the last power-down when starting up
499 499  )))
500 -|=(% style="width: 160px;" %)HSW1200|(% colspan="1" rowspan="2" style="width:282px" %)TSAP settings for HMI in the Siemens LOGO! 8 protocol(ig series or HMI V2.0)|(% style="width:452px" %)HMI local TSAP, which corresponds to the remote TSAP of PLC
501 -|=(% style="width: 160px;" %)HSW1201|(% style="width:452px" %)HMI remote TSAP, which corresponds to the local TSAP of PLC
502 502  |=(% style="width: 160px;" %)HSW1450|(% style="width:282px" %)Enable objects level password function|(% style="width:452px" %)(((
503 503  * =0, Disable
504 504  * =1, Enable
... ... @@ -605,9 +605,6 @@
605 605  * =0: Server connection exception
606 606  * =1: Server connection is OK
607 607  )))
608 -|=(% style="width: 160px;" %)HSW1740|(% style="width:282px" %)Wi-fi signal strength|(% style="width:452px" %)(((
609 -Display the value of Wi-fi signal signal strength, ranges from 0~~100 (Signal strength is automatically obtained only once when HMI is powered on, and it will not be automatically updated. It needs to be used with the HSW1890)
610 -)))
611 611  |=(% style="width: 160px;" %)HSW1741|(% colspan="1" rowspan="12" style="width:282px" %)Related IP register in 4Gnetwork status (It is valid when HMI is connected to 4G)|(% style="width:452px" %)Local IP address high byte 1
612 612  |=(% style="width: 160px;" %)HSW1742|(% style="width:452px" %)Local IP address high byte 2
613 613  |=(% style="width: 160px;" %)HSW1743|(% style="width:452px" %)Local IP address high byte 3
... ... @@ -635,180 +635,10 @@
635 635  * =1: Server connection is OK
636 636  )))
637 637  |=(% style="width: 160px;" %)HSW1761|(% style="width:282px" %)Display 4G network signal strength|(% style="width:452px" %)Signal strength: 0~~31. The greater the value ,the signal is stronger
638 -|=(% style="width: 160px;" %)(((
639 -HSW1762
640 -)))|(% colspan="1" rowspan="13" style="width:282px" %)(((
641 -Note: Valid when Ethernet2 of HMI is plugged into the network cable.
642 -①、When the Ethernet setting is enabled in the project parameters, this register displays the set value.
643 -②. When the Ethernet setting is not enabled in the engineering parameters, the register displays the Ethernet IP automatically acquired by the HMI.
644 -③. When the HMI is not plugged into the network cable, the register will show 0 whether the engineering parameters are set or not.
645 -④.IP related registers can be read and written (only static IP mode can be written).
646 -)))|(% style="width:452px" %)(((
647 -Ethernet2 Local IP address high byte 1
648 -)))
649 -|=(% style="width: 160px;" %)(((
650 -HSW1763
651 -)))|(% style="width:452px" %)(((
652 -Ethernet2 Local IP address high byte 2
653 -)))
654 -|=(% style="width: 160px;" %)(((
655 -HSW1764
656 -)))|(% style="width:452px" %)(((
657 -Ethernet2 Local IP address high byte 3
658 -)))
659 -|=(% style="width: 160px;" %)(((
660 -HSW1765
661 -)))|(% style="width:452px" %)(((
662 -Ethernet2 Local IP address high byte 4
663 -)))
664 -|=(% style="width: 160px;" %)(((
665 -HSW1766
666 -)))|(% style="width:452px" %)(((
667 -Ethernet2 Local mask IP address high byte 1
668 -)))
669 -|=(% style="width: 160px;" %)(((
670 -HSW1767
671 -)))|(% style="width:452px" %)(((
672 -Ethernet2 Local mask IP address high byte 2
673 -)))
674 -|=(% style="width: 160px;" %)(((
675 -HSW1768
676 -)))|(% style="width:452px" %)Ethernet2 Local mask IP address high byte 3
677 -|=(% style="width: 160px;" %)HSW1769|(% style="width:452px" %)Ethernet2 Local mask IP address high byte 4
678 -|=(% style="width: 160px;" %)(((
679 -HSW1770
680 -)))|(% style="width:452px" %)(((
681 -Ethernet2 Local gateway IP address high byte 1
682 -)))
683 -|=(% style="width: 160px;" %)(((
684 -HSW1771
685 -)))|(% style="width:452px" %)(((
686 -Ethernet2 Local gateway IP address high byte 2
687 -)))
688 -|=(% style="width: 160px;" %)(((
689 -HSW1772
690 -)))|(% style="width:452px" %)(((
691 -Ethernet2 Local gateway IP address high byte 3
692 -)))
693 -|=(% style="width: 160px;" %)(((
694 -HSW1773
695 -)))|(% style="width:452px" %)(((
696 -Ethernet2 Local gateway IP address high byte 4
697 -)))
698 -|=(% style="width: 160px;" %)(((
699 -HSW1774
700 -)))|(% style="width:452px" %)(((
701 -Ethernet2 Local Port Address
702 -)))
703 -|=(% style="width: 160px;" %)(((
704 -HSW1775
705 -)))|(% colspan="1" rowspan="6" style="width:282px" %)(((
706 -①Display the MAC code of Ethernet2 NIC
707 -
708 -(hexadecimal display)
709 -
710 -②Read-only mode, not modifiable
711 -)))|(% style="width:452px" %)(((
712 -Ethernet2 Local MAC code high byte 1
713 -)))
714 -|=(% style="width: 160px;" %)(((
715 -HSW1776
716 -)))|(% style="width:452px" %)(((
717 -Ethernet2 Local MAC code high byte 2
718 -)))
719 -|=(% style="width: 160px;" %)(((
720 -HSW1777
721 -)))|(% style="width:452px" %)(((
722 -Ethernet2 Local MAC code high byte 3
723 -)))
724 -|=(% style="width: 160px;" %)(((
725 -HSW1778
726 -)))|(% style="width:452px" %)(((
727 -Ethernet2 Local MAC code high byte 4
728 -)))
729 -|=(% style="width: 160px;" %)(((
730 -HSW1779
731 -)))|(% style="width:452px" %)(((
732 -Ethernet2 Local MAC code high byte 5
733 -)))
734 -|=(% style="width: 160px;" %)(((
735 -HSW1780
736 -)))|(% style="width:452px" %)(((
737 -Ethernet2 Local MAC code high byte 6
738 -)))
739 -|=(% style="width: 160px;" %)(((
740 -HSW1781
741 -)))|(% colspan="1" rowspan="8" style="width:282px" %)(((
742 -①Display and modify DNS1 and DNS2 of Ethernet2
743 -
744 -②Related registers can be read and written mode (only static IP mode can be written)
745 -)))|(% style="width:452px" %)(((
746 -Ethernet2 Local DNS1 address high byte 1
747 -)))
748 -|=(% style="width: 160px;" %)(((
749 -HSW1782
750 -)))|(% style="width:452px" %)(((
751 -Ethernet2 Local DNS1 address high byte 2
752 -)))
753 -|=(% style="width: 160px;" %)(((
754 -HSW1783
755 -)))|(% style="width:452px" %)(((
756 -Ethernet2 Local DNS1 address high byte 3
757 -)))
758 -|=(% style="width: 160px;" %)(((
759 -HSW1784
760 -)))|(% style="width:452px" %)(((
761 -Ethernet2 Local DNS1 address high byte 4
762 -)))
763 -|=(% style="width: 160px;" %)(((
764 -HSW1785
765 -)))|(% style="width:452px" %)(((
766 -Ethernet2 Local DNS2 address high byte 1
767 -)))
768 -|=(% style="width: 160px;" %)(((
769 -HSW1786
770 -)))|(% style="width:452px" %)(((
771 -Ethernet2 Local DNS2 address high byte 2
772 -)))
773 -|=(% style="width: 160px;" %)(((
774 -HSW1787
775 -)))|(% style="width:452px" %)(((
776 -Ethernet2 Local DNS2 address high byte 3
777 -)))
778 -|=(% style="width: 160px;" %)(((
779 -HSW1788
780 -)))|(% style="width:452px" %)(((
781 -Ethernet2 Local DNS2 address high byte 4
782 -)))
783 -|=(% style="width: 160px;" %)(((
784 -HSW1789
785 -)))|(% colspan="1" style="width:282px" %)(((
786 -Display or set the dynamic or static IP mode of Ethernet2
787 -)))|(% style="width:452px" %)(((
788 -HSX1789.0 = 0, Static IP mode
789 -
790 -HSX1789.0 = 1, dynamic IP mode
791 -)))
792 -|=(% style="width: 160px;" %)(((
793 -HSW1790
794 -)))|(% colspan="1" style="width:282px" %)(((
795 -Confirm Ethernet2 IP, subnet mask, gateway, DNS1, DNS2, and dynamic static IP settings
796 -)))|(% style="width:452px" %)(((
797 -~= 1, confirm the setting (i.e., after modifying IP-related information, set this address to 1, representing confirmation of the modification, after which it will be reset to 0)
798 -)))
799 -|=(% style="width: 160px;" %)(((
800 -HSW1791
801 -)))|(% colspan="1" style="width:282px" %)(((
802 -Network status of the Ethernet2 connection server
803 -)))|(% style="width:452px" %)(((
804 -~= 0, connection to the server is abnormal = 1, connection to the server is normal
805 -)))
806 806  |=(% style="width: 160px;" %)HSW1852|(% style="width:282px" %)Control the interval in two consecutive clicks|(% style="width:452px" %)Limit range: 1~~500ms. The default is 100 ms.
807 807  |=(% style="width: 160px;" %)HSW1853|(% style="width:282px" %)File format for exporting data records to USB flash drive or SD card|(% style="width:452px" %)(((
808 808  * =0: db database
809 809  * =1: CSV
810 -
811 -(Only valid for script function DbToCsvFile)
812 812  )))
813 813  |=(% style="width: 160px;" %)HSW1854|(% style="width:282px" %)High and low word conversion type|(% style="width:452px" %)(((
814 814  * =0: use the old high-low word conversion (default)
... ... @@ -831,11 +831,11 @@
831 831  * =2: enter the background
832 832  )))
833 833  |=(% style="width: 160px;" %)HSW1865|(% style="width:282px" %)Priority connection to the cloud|(% style="width:452px" %)(((
834 -* =0: priority Ethernet
647 +* =0: priority  Ethernet
835 835  * =1: priority WLAN
836 836  * =2: priority 4G
837 837  )))
838 -|=(% style="width: 160px;" %)HSW1866|(% style="width:282px" %)Delete the Lua extension module file|(% style="width:452px" %)(((
651 +|=(% style="width: 160px;" %)HSW1866|(% style="width:282px" %)Delete the LUa extension module file|(% style="width:452px" %)(((
839 839  * =0: delete;
840 840  * = Others: do not delete
841 841  )))
... ... @@ -851,75 +851,14 @@
851 851  * = 0: yes (default);
852 852  * = 1: no
853 853  )))
854 -|=(% style="width: 160px;" %)(((
855 -HSW1869
856 -)))|(% style="width:282px" %)(((
857 -Dynamic screensaver countdown
858 -)))|(% style="width:452px" %)(((
859 -Countdown to enter dynamic screensaver effect, unit (S)
860 -)))
861 -|=(% style="width: 160px;" %)(((
862 -HSW1870
863 -)))|(% style="width:282px" %)(((
864 -Display or set the dynamic or static IP mode of Ethernet1
865 -)))|(% style="width:452px" %)(((
866 -HSX1870.0 = 0, Static IP mode
867 -
868 -HSX1870.0 = 1, dynamic IP mode
869 -)))
870 -|=(% style="width: 160px;" %)(((
871 -HSW1871
872 -)))|(% style="width:282px" %)(((
873 -Confirm the IP, subnet mask, gateway, DNS1, DNS2, and dynamic static IP settings for Ethernet1
874 -)))|(% style="width:452px" %)(((
875 -~= 1, confirm the setting (i.e., after modifying IP-related information, set this address to 1, representing confirmation of the modification, after which it will be reset to 0)
876 -)))
877 -|=(% style="width: 160px;" %)(((
878 -HSW1872
879 -)))|(% colspan="1" rowspan="8" style="width:282px" %)(((
880 -①Display and modify DNS1 and DNS2 of Ethernet1
881 -
882 -②Related registers can be read and written mode (only static IP mode can be written)
883 -)))|(% style="width:452px" %)(((
884 -Ethernet1 Local DNS1 address high byte 1
885 -)))
886 -|=(% style="width: 160px;" %)(((
887 -HSW1873
888 -)))|(% style="width:452px" %)Ethernet1 Local DNS1 address high byte 2
889 -|=(% style="width: 160px;" %)(((
890 -HSW1874
891 -)))|(% style="width:452px" %)Ethernet1 Local DNS1 address high byte 3
892 -|=(% style="width: 160px;" %)(((
893 -HSW1875
894 -)))|(% style="width:452px" %)Ethernet1 Local DNS1 address high byte 4
895 -|=(% style="width: 160px;" %)(((
896 -HSW1876
897 -)))|(% style="width:452px" %)Ethernet1 Local DNS2 address high byte 1
898 -|=(% style="width: 160px;" %)(((
899 -HSW1877
900 -)))|(% style="width:452px" %)Ethernet1 Local DNS2 address high byte 2
901 -|=(% style="width: 160px;" %)(((
902 -HSW1878
903 -)))|(% style="width:452px" %)Ethernet1 Local DNS2 address high byte 3
904 -|=(% style="width: 160px;" %)(((
905 -HSW1879
906 -)))|(% style="width:452px" %)Ethernet1 Local DNS2 address high byte 4
907 -|=(% style="width: 160px;" %)HSW1890|(% colspan="1" style="width:282px" %)Enable refresh current network signal|(% style="width:452px" %)(((
908 -* =1: Refresh the network signal once after triggered (This register will be automatically reset after triggered, only update the signal value once after per 15 seconds, not able to update twice in the short interval)
909 -* =Others: not refresh
910 -)))
911 -|=(% style="width: 160px;" %)HSW1891|(% colspan="1" style="width:282px" %)Enable clear cache for screen data  |(% style="width:452px" %)(((
912 -* =1, not clear screen cache when switch language
913 -* =2, trigger clear cache of all screens for once time
914 -* =3, always clear cache of all screen data
915 -)))
916 916  |=(% style="width: 160px;" %)HSW10000~~19999|(% style="width:282px" %)Power-down storage area|(% style="width:452px" %)After restart, the data remains
917 917  |=(% style="width: 160px;" %)HSW10035|(% rowspan="13" style="width:282px" %)(((
918 -Note: Valid when Ethernet1 of HMI is plugged into the network cable.
919 -① When the Ethernet setting is enabled in the project parameters, this register displays the set value.
920 -② When the Ethernet setting is not enabled in the engineering parameters, the register displays the Ethernet IP automatically acquired by the HMI.
921 -③ When the HMI is not plugged into the network cable, the register will show 0 whether the engineering parameters are set or not.
922 -④ IP related registers can be read and written (only static IP mode can be written).
669 +**✎Note: **Only valid when the HMI is plugged into the Ethernet cable.
670 +
671 +1. If Ethernet settings is enabled in project parameters, this register displays the set value.
672 +1. If Ethernet settings is not enabled in project parameters, IP would automatically obtained IP.
673 +1. If HMI is not connected to the network, the register is displayed as 0 whether the engineering parameters are set.
674 +1. 4. All IP registers of HMI are read-only.
923 923  )))|(% style="width:452px" %)Local IP address high byte 1
924 924  |=(% style="width: 160px;" %)HSW10036|(% style="width:452px" %)Local IP address high byte 2
925 925  |=(% style="width: 160px;" %)HSW10037|(% style="width:452px" %)Local IP address high byte 3
... ... @@ -934,11 +934,9 @@
934 934  |=(% style="width: 160px;" %)HSW10046|(% style="width:452px" %)Local gateway address high byte 4
935 935  |=(% style="width: 160px;" %)HSW10047|(% style="width:452px" %)Local port address
936 936  |=(% style="width: 160px;" %)HSW10048|(% rowspan="6" style="width:282px" %)(((
937 -①Display the MAC code of Ethernet1 NIC
689 +Displays the MAC code of the current network card
938 938  
939 -(hexadecimal display)
940 -
941 -②Read-only mode, not modifiable
691 +(Hexadecimal display)
942 942  )))|(% style="width:452px" %)Local MAC code high word 1
943 943  |=(% style="width: 160px;" %)HSW10049|(% style="width:452px" %)Local MAC code high word 2
944 944  |=(% style="width: 160px;" %)HSW10050|(% style="width:452px" %)Local MAC code high word 3
... ... @@ -945,7 +945,7 @@
945 945  |=(% style="width: 160px;" %)HSW10051|(% style="width:452px" %)Local MAC code high word 4
946 946  |=(% style="width: 160px;" %)HSW10052|(% style="width:452px" %)Local MAC code high word 5
947 947  |=(% style="width: 160px;" %)HSW10053|(% style="width:452px" %)Local MAC code high word 6
948 -|=(% style="width: 160px;" %)HSW10118|(% colspan="1" rowspan="2" style="width:282px" %)TSAP settings for HMI in the Siemens LOGO! 8 protocol|(% style="width:452px" %)HMI local TSAP, which corresponds to the remote TSAP of PLC
698 +|=(% style="width: 160px;" %)HSW10118|(% colspan="1" rowspan="2" style="width:282px" %)TSAP settings for HMI in the Siemens logo! 8 protocol|(% style="width:452px" %)HMI local TSAP, which corresponds to the remote TSAP of PLC
949 949  |=(% style="width: 160px;" %)HSW10119|(% style="width:452px" %)HMI remote TSAP, which corresponds to the local TSAP of PLC
950 950  |=(% style="width: 160px;" %)HSW10461~~10493|(% style="width:282px" %)Remote access password|(% style="width:452px" %)8-character remote access password
951 951  |=(% style="width: 160px;" %)HSW10494~~10558|(% style="width:282px" %)Machine ID (Read only)|(% style="width:452px" %)Machine ID for remote access (read only 64-bit)
... ... @@ -1013,7 +1013,6 @@
1013 1013  * =0: LAN or the external network both OK
1014 1014  * =1: Only LAN access
1015 1015  * =2: Only external network can access
1016 -* =3: Close the functions
1017 1017  )))
1018 1018  |=(% style="width: 160px;" %)HSW11757|(% style="width:282px" %)Enable the valid date of the dynamic installment password|(% style="width:452px" %)(((
1019 1019  * =0: Disabled
... ... @@ -1028,34 +1028,7 @@
1028 1028  )))
1029 1029  |=(% style="width: 160px;" %)HSW11760|(% style="width:282px" %)Screensaver countdown|(% style="width:452px" %)Display the countdown to enter the Screensaver, unit: second.
1030 1030  |=(% style="width: 160px;" %)HSW11761|(% style="width:282px" %)Screensaver screen number|(% style="width:452px" %)Set the screen number for Screensaver
1031 -|=(% style="width: 160px;" %)(((
1032 -HSW11762
1033 -)))|(% style="width:282px" %)(((
1034 -Dynamic screensaver control address
1035 -)))|(% style="width:452px" %)(((
1036 -HSX11762.0=0, initialize with project configuration;
1037 1037  
1038 -HSX11762.0=1, initialize with special register configuration;
1039 -
1040 -HSX11762.1=0, disable dynamic screensaver;
1041 -
1042 -HSX11762.1=1, enable dynamic screensaver
1043 -)))
1044 -|=(% style="width: 160px;" %)(((
1045 -HSW11763
1046 -)))|(% style="width:282px" %)(((
1047 -Waiting time to enter the dynamic screensaver
1048 -)))|(% style="width:452px" %)(((
1049 -Waiting time when the screen is not operated, range 1~~720 minutes
1050 -)))
1051 -|=(% style="width: 160px;" %)(((
1052 -HSW11764
1053 -)))|(% style="width:282px" %)(((
1054 -Animated screensaver animation type
1055 -)))|(% style="width:452px" %)(((
1056 -~=0: Raster,=1: Blinds,=2: Bubble
1057 -)))
1058 -
1059 1059  == Serial port communication configuration ==
1060 1060  
1061 1061  (% class="table-bordered" %)
6.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Mora
Size
... ... @@ -1,1 +1,0 @@
1 -20.1 KB
Content