Changes for page 13 HMI Internal Registers

Summary

• Page properties (3 modified, 0 added, 0 removed)
• Attachments (0 modified, 1 added, 0 removed)
  • 6.png

Details

Page properties

Title

...	...	@@ -1,1 +1,1 @@
1		-12 HMI internal registers
	1	+13.HMI Internal Registers

Author

...	...	@@ -1,1 +1,1 @@
1		-XWiki.Stone
	1	+XWiki.Mora

Content

...	...	@@ -4,11 +4,11 @@
4	4
5	5	*HSW, HDW, HUW, HAW are word address, HSX, HDX, HUX, HAX are bit address.
6	6
7		-1. **System data area (HSW): **A special register defined by the system.
8		-1. **Data storage area (HDW/HDX): **Users store user data.
9		-1. **System data area (HUW): **A special register defined by the system.
10		-1. **System Data (HAW)**: System register used for power-off save.
11		-1. **Recipe index area (RPW): **System register used for recipe index.
	7	+* **System data area (HSW): **A special register defined by the system.
	8	+* **Data storage area (HDW/HDX): **Users store user data.
	9	+* **System data area (HUW): **A special register defined by the system.
	10	+* **System Data (HAW)**: System register used for power-off save.
	11	+* **Recipe index area (RPW): **System register used for recipe index.
12	12
13	13	HMI internal registers are divided into bit address and word address, which can be accessed in two ways (take HDW as an example).
14	14
...	...	@@ -25,6 +25,11 @@
25	25	* The address of the bit address HDX is with a decimal point while word addresses are integers.
26	26	)))
27	27
	28	+= Address ranges table =
	29	+
	30	+(% style="text-align:center" %)
	31	+[[image:6.png]]
	32	+
28	28	= **Data storage area (HDW/HDX)** =
29	29
30	30	It is used to save the temporary data of project.
...	...	@@ -60,8 +60,8 @@
60	60
61	61	It is used for system special registers (reserved by system).
62	62
63		-1. Access as word, and serial number range is from HUW0 to HUW199999.
64		-1. Access as bit, and serial number range is from HUX0.0 to HUX199999.15.
	68	+1. Access as word, and serial number range is from HUW0 to HUW1599.
	69	+1. Access as bit, and serial number range is from HUX0.0 to HUX1599.15.
65	65
66	66	**✎Note:**
67	67
...	...	@@ -135,8 +135,8 @@
135	135	(% class="table-bordered" style="width:1024px" %)
136	136	|=(% scope="row" style="width: 160px;" %)**Address**|=(% style="width: 282px;" %)**Function**|=(% style="width: 452px;" %)**Description**
137	137	|=(% style="width: 160px;" %)HSW0|(% style="width:282px" %)Language switch|(% style="width:452px" %)Multiple language could be set in the project, HMI support maximum 8 languages. (Power-down save supported)
138		-|=(% style="width: 160px;" %)HSW1|(% style="width:282px" %)Beep frequency|(% style="width:452px" %)Frequency range: 0~~4000
139		-|=(% style="width: 160px;" %)HSW2|(% style="width:282px" %)Beep volume|(% style="width:452px" %)Volume range: 0~~80
	143	+|=(% style="width: 160px;" %)HSW1|(% style="width:282px" %)Beep frequency (Only valid in HMI V1.0 System)|(% style="width:452px" %)Frequency range: 0~~4000
	144	+|=(% style="width: 160px;" %)HSW2|(% style="width:282px" %)Beep volume (Only valid in HMI V1.0 System)|(% style="width:452px" %)Volume range: 0~~80
140	140	|=(% style="width: 160px;" %)HSW3|(% style="width:282px" %)Beep time|(% style="width:452px" %)Unit: ms
141	141	|=(% style="width: 160px;" %)HSW4|(% style="width:282px" %)Beep whether enable or not|(% style="width:452px" %)(((
142	142	* =0: Enable.
...	...	@@ -150,7 +150,7 @@
150	150	)))
151	151	|=(% style="width: 160px;" %)HSW6~~HSW7|(% style="width:282px" %)Number of alarms|(% style="width:452px" %)The number of alarm (it also includes the records of alarm confirmed)
152	152	|=(% style="width: 160px;" %)HSW8|(% style="width:282px" %)Number of unconfirmed history alarm|(% style="width:452px" %)The number of unconfirmed history alarm
153		-|=(% style="width: 160px;" %)HSW9|(% style="width:282px" %)Time out tip|(% style="width:452px" %)(((
	158	+|=(% style="width: 160px;" %)HSW9|(% style="width:282px" %)Time out prompt|(% style="width:452px" %)(((
154	154	* =0: Enable
155	155	* =1: Disable
156	156	)))
...	...	@@ -175,6 +175,7 @@
175	175	* =5: Friday.
176	176	* =6: Saturday.
177	177	)))
	183	+|=(% style="width: 160px;" %)HSW39|(% style="width:282px" %)Beep type(Only valid in HMI V2.0 System)|(% style="width:452px" %)
178	178	|=(% style="width: 160px;" %)HSW134|(% style="width:282px" %)(((
179	179	Whether the Script is read through
180	180
...	...	@@ -241,8 +241,8 @@
241	241	* =2: HSX521.1=1, delete all trend graph.
242	242	* =4: HSX521.2=1, delete all alarms.
243	243	* =16: HSX521.4=1, delete history XY plot.
244		-* =32: HSX521.5=1, delete data records in SD card or flash dish;(Please make a setting which is saved to flash disk or SD card in project setting).
245		-* =64: HSX521.6=1, delete alarms records in SD card or flash dish; (Please make a setting which is saved to flash disk or SD card in project setting).
	250	+* =32: HSX521.5=1, delete data records in SD card or USB flash disk;(Please make a setting which is saved to USB flash disk or SD card in project setting).
	251	+* =64: HSX521.6=1, delete alarms records in SD card or USB flash disk; (Please make a setting which is saved to USB flash disk or SD card in project setting).
246	246	)))
247	247	|=(% style="width: 160px;" %)HSW522|(% style="width:282px" %)Copy and paste the alarm/data files in flash to the USB flash disk|(% style="width:452px" %)(((
248	248	* =0: No operation
...	...	@@ -342,7 +342,7 @@
342	342	|=(% style="width: 160px;" %)HSW884|(% style="width:282px" %)Enter the system network configuration interface|(% style="width:452px" %)(((
343	343	* =0: Do not enter the network configuration interface
344	344	* =1: Enter the system network configuration interface.
345		-** (ig series HMI only supports to enter the system interface)
	351	+** ig series HMI only supports to enter the system interface
346	346
347	347	)))
348	348	|=(% style="width: 160px;" %)HSW885|(% style="width:282px" %)When the control object hides the address is read failed (communication failure), set the display mode of the object|(% style="width:452px" %)(((
...	...	@@ -450,7 +450,7 @@
450	450	Address mapping polling cycle, effective range: 40~~1000ms, default: 300ms.
451	451
452	452	* When the set value is greater than 1000, the value is 1000.
453		-* When the set value is greater than 1000, it changes to the default value 300
	459	+* When the set value is lower than 40, it changes to the default value 300
454	454	)))
455	455	|=(% style="width: 160px;" %)HSW1087|(% style="width:282px" %)Control write interval in address mapping|(% style="width:452px" %)(((
456	456	After reading data to the device for N times, Perform an address mapping write operation. N is the interval value. The effective range: 0~~5, and default is 2.
...	...	@@ -485,6 +485,8 @@
485	485	* =0, Default value
486	486	* =1, Release the alarm generated before the last power-down when starting up
487	487	)))
	494	+|=(% style="width: 160px;" %)HSW1200|(% colspan="1" rowspan="2" style="width:282px" %)TSAP settings for HMI in the Siemens LOGO! 8 protocol(ig series or HMI V2.0)|(% style="width:452px" %)HMI local TSAP, which corresponds to the remote TSAP of PLC
	495	+|=(% style="width: 160px;" %)HSW1201|(% style="width:452px" %)HMI remote TSAP, which corresponds to the local TSAP of PLC
488	488	|=(% style="width: 160px;" %)HSW1450|(% style="width:282px" %)Enable objects level password function|(% style="width:452px" %)(((
489	489	* =0, Disable
490	490	* =1, Enable
...	...	@@ -512,6 +512,10 @@
512	512	* HSX1502.0=1: Modification comfirmed. Save the data of HSW1450~~HSW1501 to a file for immediate effect.
513	513	* HSX1502.1=1:Modification cancelled. Restore the current data of hSW1450-HSW1501 to the data saved in the file last time.
514	514	)))
	523	+|=(% style="width: 160px;" %)HSW1509|(% style="width:282px" %)Curve width|(% style="width:452px" %)(((
	524	+* =0: Use the curve width set by project default.
	525	+* =1 to 10: use special register to set curve width.
	526	+)))
515	515	|=(% style="width: 160px;" %)HSW1603|(% style="width:282px" %)Number of current unreleased alarms|(% style="width:452px" %)The number of current unreleased alarms in alarm record file.
516	516	|=(% style="width: 160px;" %)HSW1604|(% style="width:282px" %)The auxiliary judgment address when the control bit in the Object Lock fails to be read|(% style="width:452px" %)(((
517	517	* =0: The auxiliary address is invalid.
...	...	@@ -587,6 +587,9 @@
587	587	* =0: Server connection exception
588	588	* =1: Server connection is OK
589	589	)))
	602	+|=(% style="width: 160px;" %)HSW1740|(% style="width:282px" %)Wi-fi signal strength|(% style="width:452px" %)(((
	603	+Display the value of Wi-fi signal signal strength, ranges from 0~~100 (Signal strength is automatically obtained only once when HMI is powered on, and it will not be automatically updated. It needs to be used with the HSW1890)
	604	+)))
590	590	|=(% style="width: 160px;" %)HSW1741|(% colspan="1" rowspan="12" style="width:282px" %)Related IP register in 4Gnetwork status (It is valid when HMI is connected to 4G)|(% style="width:452px" %)Local IP address high byte 1
591	591	|=(% style="width: 160px;" %)HSW1742|(% style="width:452px" %)Local IP address high byte 2
592	592	|=(% style="width: 160px;" %)HSW1743|(% style="width:452px" %)Local IP address high byte 3
...	...	@@ -614,10 +614,180 @@
614	614	* =1: Server connection is OK
615	615	)))
616	616	|=(% style="width: 160px;" %)HSW1761|(% style="width:282px" %)Display 4G network signal strength|(% style="width:452px" %)Signal strength: 0~~31. The greater the value ,the signal is stronger
	632	+|=(% style="width: 160px;" %)(((
	633	+HSW1762
	634	+)))|(% colspan="1" rowspan="13" style="width:282px" %)(((
	635	+Note: Valid when Ethernet2 of HMI is plugged into the network cable.
	636	+①、When the Ethernet setting is enabled in the project parameters, this register displays the set value.
	637	+②. When the Ethernet setting is not enabled in the engineering parameters, the register displays the Ethernet IP automatically acquired by the HMI.
	638	+③. When the HMI is not plugged into the network cable, the register will show 0 whether the engineering parameters are set or not.
	639	+④.IP related registers can be read and written (only static IP mode can be written).
	640	+)))|(% style="width:452px" %)(((
	641	+Ethernet2 Local IP address high byte 1
	642	+)))
	643	+|=(% style="width: 160px;" %)(((
	644	+HSW1763
	645	+)))|(% style="width:452px" %)(((
	646	+Ethernet2 Local IP address high byte 2
	647	+)))
	648	+|=(% style="width: 160px;" %)(((
	649	+HSW1764
	650	+)))|(% style="width:452px" %)(((
	651	+Ethernet2 Local IP address high byte 3
	652	+)))
	653	+|=(% style="width: 160px;" %)(((
	654	+HSW1765
	655	+)))|(% style="width:452px" %)(((
	656	+Ethernet2 Local IP address high byte 4
	657	+)))
	658	+|=(% style="width: 160px;" %)(((
	659	+HSW1766
	660	+)))|(% style="width:452px" %)(((
	661	+Ethernet2 Local mask IP address high byte 1
	662	+)))
	663	+|=(% style="width: 160px;" %)(((
	664	+HSW1767
	665	+)))|(% style="width:452px" %)(((
	666	+Ethernet2 Local mask IP address high byte 2
	667	+)))
	668	+|=(% style="width: 160px;" %)(((
	669	+HSW1768
	670	+)))|(% style="width:452px" %)Ethernet2 Local mask IP address high byte 3
	671	+|=(% style="width: 160px;" %)HSW1769|(% style="width:452px" %)Ethernet2 Local mask IP address high byte 4
	672	+|=(% style="width: 160px;" %)(((
	673	+HSW1770
	674	+)))|(% style="width:452px" %)(((
	675	+Ethernet2 Local gateway IP address high byte 1
	676	+)))
	677	+|=(% style="width: 160px;" %)(((
	678	+HSW1771
	679	+)))|(% style="width:452px" %)(((
	680	+Ethernet2 Local gateway IP address high byte 2
	681	+)))
	682	+|=(% style="width: 160px;" %)(((
	683	+HSW1772
	684	+)))|(% style="width:452px" %)(((
	685	+Ethernet2 Local gateway IP address high byte 3
	686	+)))
	687	+|=(% style="width: 160px;" %)(((
	688	+HSW1773
	689	+)))|(% style="width:452px" %)(((
	690	+Ethernet2 Local gateway IP address high byte 4
	691	+)))
	692	+|=(% style="width: 160px;" %)(((
	693	+HSW1774
	694	+)))|(% style="width:452px" %)(((
	695	+Ethernet2 Local Port Address
	696	+)))
	697	+|=(% style="width: 160px;" %)(((
	698	+HSW1775
	699	+)))|(% colspan="1" rowspan="6" style="width:282px" %)(((
	700	+①Display the MAC code of Ethernet2 NIC
	701	+
	702	+(hexadecimal display)
	703	+
	704	+②Read-only mode, not modifiable
	705	+)))|(% style="width:452px" %)(((
	706	+Ethernet2 Local MAC code high byte 1
	707	+)))
	708	+|=(% style="width: 160px;" %)(((
	709	+HSW1776
	710	+)))|(% style="width:452px" %)(((
	711	+Ethernet2 Local MAC code high byte 2
	712	+)))
	713	+|=(% style="width: 160px;" %)(((
	714	+HSW1777
	715	+)))|(% style="width:452px" %)(((
	716	+Ethernet2 Local MAC code high byte 3
	717	+)))
	718	+|=(% style="width: 160px;" %)(((
	719	+HSW1778
	720	+)))|(% style="width:452px" %)(((
	721	+Ethernet2 Local MAC code high byte 4
	722	+)))
	723	+|=(% style="width: 160px;" %)(((
	724	+HSW1779
	725	+)))|(% style="width:452px" %)(((
	726	+Ethernet2 Local MAC code high byte 5
	727	+)))
	728	+|=(% style="width: 160px;" %)(((
	729	+HSW1780
	730	+)))|(% style="width:452px" %)(((
	731	+Ethernet2 Local MAC code high byte 6
	732	+)))
	733	+|=(% style="width: 160px;" %)(((
	734	+HSW1781
	735	+)))|(% colspan="1" rowspan="8" style="width:282px" %)(((
	736	+①Display and modify DNS1 and DNS2 of Ethernet2
	737	+
	738	+②Related registers can be read and written mode (only static IP mode can be written)
	739	+)))|(% style="width:452px" %)(((
	740	+Ethernet2 Local DNS1 address high byte 1
	741	+)))
	742	+|=(% style="width: 160px;" %)(((
	743	+HSW1782
	744	+)))|(% style="width:452px" %)(((
	745	+Ethernet2 Local DNS1 address high byte 2
	746	+)))
	747	+|=(% style="width: 160px;" %)(((
	748	+HSW1783
	749	+)))|(% style="width:452px" %)(((
	750	+Ethernet2 Local DNS1 address high byte 3
	751	+)))
	752	+|=(% style="width: 160px;" %)(((
	753	+HSW1784
	754	+)))|(% style="width:452px" %)(((
	755	+Ethernet2 Local DNS1 address high byte 4
	756	+)))
	757	+|=(% style="width: 160px;" %)(((
	758	+HSW1785
	759	+)))|(% style="width:452px" %)(((
	760	+Ethernet2 Local DNS2 address high byte 1
	761	+)))
	762	+|=(% style="width: 160px;" %)(((
	763	+HSW1786
	764	+)))|(% style="width:452px" %)(((
	765	+Ethernet2 Local DNS2 address high byte 2
	766	+)))
	767	+|=(% style="width: 160px;" %)(((
	768	+HSW1787
	769	+)))|(% style="width:452px" %)(((
	770	+Ethernet2 Local DNS2 address high byte 3
	771	+)))
	772	+|=(% style="width: 160px;" %)(((
	773	+HSW1788
	774	+)))|(% style="width:452px" %)(((
	775	+Ethernet2 Local DNS2 address high byte 4
	776	+)))
	777	+|=(% style="width: 160px;" %)(((
	778	+HSW1789
	779	+)))|(% colspan="1" style="width:282px" %)(((
	780	+Display or set the dynamic or static IP mode of Ethernet2
	781	+)))|(% style="width:452px" %)(((
	782	+HSX1789.0 = 0, Static IP mode
	783	+
	784	+HSX1789.0 = 1, dynamic IP mode
	785	+)))
	786	+|=(% style="width: 160px;" %)(((
	787	+HSW1790
	788	+)))|(% colspan="1" style="width:282px" %)(((
	789	+Confirm Ethernet2 IP, subnet mask, gateway, DNS1, DNS2, and dynamic static IP settings
	790	+)))|(% style="width:452px" %)(((
	791	+~= 1, confirm the setting (i.e., after modifying IP-related information, set this address to 1, representing confirmation of the modification, after which it will be reset to 0)
	792	+)))
	793	+|=(% style="width: 160px;" %)(((
	794	+HSW1791
	795	+)))|(% colspan="1" style="width:282px" %)(((
	796	+Network status of the Ethernet2 connection server
	797	+)))|(% style="width:452px" %)(((
	798	+~= 0, connection to the server is abnormal = 1, connection to the server is normal
	799	+)))
617	617	|=(% style="width: 160px;" %)HSW1852|(% style="width:282px" %)Control the interval in two consecutive clicks|(% style="width:452px" %)Limit range: 1~~500ms. The default is 100 ms.
618	618	|=(% style="width: 160px;" %)HSW1853|(% style="width:282px" %)File format for exporting data records to USB flash drive or SD card|(% style="width:452px" %)(((
619	619	* =0: db database
620	620	* =1: CSV
	804	+
	805	+(Only valid for script function DbToCsvFile)
621	621	)))
622	622	|=(% style="width: 160px;" %)HSW1854|(% style="width:282px" %)High and low word conversion type|(% style="width:452px" %)(((
623	623	* =0: use the old high-low word conversion (default)
...	...	@@ -639,14 +639,96 @@
639	639	* =1: download firmware
640	640	* =2: enter the background
641	641	)))
	827	+|=(% style="width: 160px;" %)HSW1865|(% style="width:282px" %)Priority connection to the cloud|(% style="width:452px" %)(((
	828	+* =0: priority Ethernet
	829	+* =1: priority WLAN
	830	+* =2: priority 4G
	831	+)))
	832	+|=(% style="width: 160px;" %)HSW1866|(% style="width:282px" %)Delete the Lua extension module file|(% style="width:452px" %)(((
	833	+* =0: delete;
	834	+* = Others: do not delete
	835	+)))
	836	+|=(% style="width: 160px;" %)HSW1867|(% style="width:282px" %)Reset mode|(% style="width:452px" %)(((
	837	+Monitor address is set during reset of reset switch, whether to cancel reset,
	838	+
	839	+* = 0: yes (default);
	840	+* = 1: no
	841	+)))
	842	+|=(% style="width: 160px;" %)HSW1868|(% style="width:282px" %)Double-click or long press the record type table mode|(% style="width:452px" %)(((
	843	+Controls whether the button pops up when double-clicking or long pressing on record type table object
	844	+
	845	+* = 0: yes (default);
	846	+* = 1: no
	847	+)))
	848	+|=(% style="width: 160px;" %)(((
	849	+HSW1869
	850	+)))|(% style="width:282px" %)(((
	851	+Dynamic screensaver countdown
	852	+)))|(% style="width:452px" %)(((
	853	+Countdown to enter dynamic screensaver effect, unit (S)
	854	+)))
	855	+|=(% style="width: 160px;" %)(((
	856	+HSW1870
	857	+)))|(% style="width:282px" %)(((
	858	+Display or set the dynamic or static IP mode of Ethernet1
	859	+)))|(% style="width:452px" %)(((
	860	+HSX1870.0 = 0, Static IP mode
	861	+
	862	+HSX1870.0 = 1, dynamic IP mode
	863	+)))
	864	+|=(% style="width: 160px;" %)(((
	865	+HSW1871
	866	+)))|(% style="width:282px" %)(((
	867	+Confirm the IP, subnet mask, gateway, DNS1, DNS2, and dynamic static IP settings for Ethernet1
	868	+)))|(% style="width:452px" %)(((
	869	+~= 1, confirm the setting (i.e., after modifying IP-related information, set this address to 1, representing confirmation of the modification, after which it will be reset to 0)
	870	+)))
	871	+|=(% style="width: 160px;" %)(((
	872	+HSW1872
	873	+)))|(% colspan="1" rowspan="8" style="width:282px" %)(((
	874	+①Display and modify DNS1 and DNS2 of Ethernet1
	875	+
	876	+②Related registers can be read and written mode (only static IP mode can be written)
	877	+)))|(% style="width:452px" %)(((
	878	+Ethernet1 Local DNS1 address high byte 1
	879	+)))
	880	+|=(% style="width: 160px;" %)(((
	881	+HSW1873
	882	+)))|(% style="width:452px" %)Ethernet1 Local DNS1 address high byte 2
	883	+|=(% style="width: 160px;" %)(((
	884	+HSW1874
	885	+)))|(% style="width:452px" %)Ethernet1 Local DNS1 address high byte 3
	886	+|=(% style="width: 160px;" %)(((
	887	+HSW1875
	888	+)))|(% style="width:452px" %)Ethernet1 Local DNS1 address high byte 4
	889	+|=(% style="width: 160px;" %)(((
	890	+HSW1876
	891	+)))|(% style="width:452px" %)Ethernet1 Local DNS2 address high byte 1
	892	+|=(% style="width: 160px;" %)(((
	893	+HSW1877
	894	+)))|(% style="width:452px" %)Ethernet1 Local DNS2 address high byte 2
	895	+|=(% style="width: 160px;" %)(((
	896	+HSW1878
	897	+)))|(% style="width:452px" %)Ethernet1 Local DNS2 address high byte 3
	898	+|=(% style="width: 160px;" %)(((
	899	+HSW1879
	900	+)))|(% style="width:452px" %)Ethernet1 Local DNS2 address high byte 4
	901	+|=(% style="width: 160px;" %)HSW1890|(% colspan="1" style="width:282px" %)Enable refresh current network signal|(% style="width:452px" %)(((
	902	+* =1: Refresh the network signal once after triggered (This register will be automatically reset after triggered, only update the signal value once after per 15 seconds, not able to update twice in the short interval)
	903	+* =Others: not refresh
	904	+)))
	905	+|=(% style="width: 160px;" %)HSW1891|(% colspan="1" style="width:282px" %)Enable clear cache for screen data  |(% style="width:452px" %)(((
	906	+* =1, not clear screen cache when switch language
	907	+* =2, trigger clear cache of all screens for once time
	908	+* =3, always clear cache of all screen data
	909	+)))
642	642	|=(% style="width: 160px;" %)HSW10000~~19999|(% style="width:282px" %)Power-down storage area|(% style="width:452px" %)After restart, the data remains
643	643	|=(% style="width: 160px;" %)HSW10035|(% rowspan="13" style="width:282px" %)(((
644		-**✎Note: **Only valid when the HMI is plugged into the Ethernet cable.
645		-
646		-1. If Ethernet settings is enabled in project parameters, this register displays the set value.
647		-1. If Ethernet settings is not enabled in project parameters, IP would automatically obtained IP.
648		-1. If HMI is not connected to the network, the register is displayed as 0 whether the engineering parameters are set.
649		-1. 4. All IP registers of HMI are read-only.
	912	+Note: Valid when Ethernet1 of HMI is plugged into the network cable.
	913	+① When the Ethernet setting is enabled in the project parameters, this register displays the set value.
	914	+② When the Ethernet setting is not enabled in the engineering parameters, the register displays the Ethernet IP automatically acquired by the HMI.
	915	+③ When the HMI is not plugged into the network cable, the register will show 0 whether the engineering parameters are set or not.
	916	+④ IP related registers can be read and written (only static IP mode can be written).
650	650	)))|(% style="width:452px" %)Local IP address high byte 1
651	651	|=(% style="width: 160px;" %)HSW10036|(% style="width:452px" %)Local IP address high byte 2
652	652	|=(% style="width: 160px;" %)HSW10037|(% style="width:452px" %)Local IP address high byte 3
...	...	@@ -661,9 +661,11 @@
661	661	|=(% style="width: 160px;" %)HSW10046|(% style="width:452px" %)Local gateway address high byte 4
662	662	|=(% style="width: 160px;" %)HSW10047|(% style="width:452px" %)Local port address
663	663	|=(% style="width: 160px;" %)HSW10048|(% rowspan="6" style="width:282px" %)(((
664		-Displays the MAC code of the current network card
	931	+①Display the MAC code of Ethernet1 NIC
665	665
666		-(Hexadecimal display)
	933	+(hexadecimal display)
	934	+
	935	+②Read-only mode, not modifiable
667	667	)))|(% style="width:452px" %)Local MAC code high word 1
668	668	|=(% style="width: 160px;" %)HSW10049|(% style="width:452px" %)Local MAC code high word 2
669	669	|=(% style="width: 160px;" %)HSW10050|(% style="width:452px" %)Local MAC code high word 3
...	...	@@ -670,7 +670,7 @@
670	670	|=(% style="width: 160px;" %)HSW10051|(% style="width:452px" %)Local MAC code high word 4
671	671	|=(% style="width: 160px;" %)HSW10052|(% style="width:452px" %)Local MAC code high word 5
672	672	|=(% style="width: 160px;" %)HSW10053|(% style="width:452px" %)Local MAC code high word 6
673		-|=(% style="width: 160px;" %)HSW10118|(% colspan="1" rowspan="2" style="width:282px" %)TSAP settings for HMI in the Siemens logo! 8 protocol|(% style="width:452px" %)HMI local TSAP, which corresponds to the remote TSAP of PLC
	942	+|=(% style="width: 160px;" %)HSW10118|(% colspan="1" rowspan="2" style="width:282px" %)TSAP settings for HMI in the Siemens LOGO! 8 protocol|(% style="width:452px" %)HMI local TSAP, which corresponds to the remote TSAP of PLC
674	674	|=(% style="width: 160px;" %)HSW10119|(% style="width:452px" %)HMI remote TSAP, which corresponds to the local TSAP of PLC
675	675	|=(% style="width: 160px;" %)HSW10461~~10493|(% style="width:282px" %)Remote access password|(% style="width:452px" %)8-character remote access password
676	676	|=(% style="width: 160px;" %)HSW10494~~10558|(% style="width:282px" %)Machine ID (Read only)|(% style="width:452px" %)Machine ID for remote access (read only 64-bit)
...	...	@@ -752,11 +752,38 @@
752	752	)))
753	753	|=(% style="width: 160px;" %)HSW11760|(% style="width:282px" %)Screensaver countdown|(% style="width:452px" %)Display the countdown to enter the Screensaver, unit: second.
754	754	|=(% style="width: 160px;" %)HSW11761|(% style="width:282px" %)Screensaver screen number|(% style="width:452px" %)Set the screen number for Screensaver
	1024	+|=(% style="width: 160px;" %)(((
	1025	+HSW11762
	1026	+)))|(% style="width:282px" %)(((
	1027	+Dynamic screensaver control address
	1028	+)))|(% style="width:452px" %)(((
	1029	+HSX11762.0=0, initialize with project configuration;
755	755
756		-== **Serial port communication configuration** ==
	1031	+HSX11762.0=1, initialize with special register configuration;
757	757
	1033	+HSX11762.1=0, disable dynamic screensaver;
	1034	+
	1035	+HSX11762.1=1, enable dynamic screensaver
	1036	+)))
	1037	+|=(% style="width: 160px;" %)(((
	1038	+HSW11763
	1039	+)))|(% style="width:282px" %)(((
	1040	+Waiting time to enter the dynamic screensaver
	1041	+)))|(% style="width:452px" %)(((
	1042	+Waiting time when the screen is not operated, range 1~~720 minutes
	1043	+)))
	1044	+|=(% style="width: 160px;" %)(((
	1045	+HSW11764
	1046	+)))|(% style="width:282px" %)(((
	1047	+Animated screensaver animation type
	1048	+)))|(% style="width:452px" %)(((
	1049	+~=0: Raster,=1: Blinds,=2: Bubble
	1050	+)))
	1051	+
	1052	+== Serial port communication configuration ==
	1053	+
758	758	(% class="table-bordered" %)
759		-|=(% style="width: 102px;" %)Port|=(% style="width: 173px;" %)**Function**|=(% style="width: 122px;" %)**Address**|=(% colspan="2" style="width: 506px;" %)**Description**
	1055	+|=(% scope="row" style="width: 102px;" %)Port|=(% style="width: 173px;" %)**Function**|=(% style="width: 122px;" %)**Address**|=(% colspan="2" style="width: 506px;" %)**Description**
760	760	|(% colspan="1" rowspan="11" style="width:102px" %)COM1|(% style="width:173px" %)Communication mode|(% style="width:122px" %)HSW10061|(% colspan="2" style="width:506px" %)(((
761	761	* =0: RS232
762	762	* =1: RS485
...	...	@@ -786,10 +786,22 @@
786	786	* =1: ODD
787	787	* =2: EVEN
788	788	)))
789		-|(% style="width:173px" %)Wait timeout|(% style="width:122px" %)HSW10066|(% colspan="2" style="width:506px" %)Unit: ms. Range: 0~~30000
790		-|(% style="width:173px" %)reveive timeout|(% style="width:122px" %)HSW10067|(% colspan="2" style="width:506px" %)Unit: ms. Range: 0~~30000
791		-|(% style="width:173px" %)Retry time|(% style="width:122px" %)HSW10068|(% colspan="2" style="width:506px" %)Unit: times. Range: 0~~100
792		-|(% style="width:173px" %)Retry timeout|(% style="width:122px" %)HSW10069|(% colspan="2" style="width:506px" %)Unit: s. Range: 0~~300
	1085	+|(% style="width:173px" %)Wait timeout|(% style="width:122px" %)HSW10066|(% colspan="2" style="width:506px" %)(((
	1086	+* Unit: ms.
	1087	+* Range: 0 to 30000
	1088	+)))
	1089	+|(% style="width:173px" %)reveive timeout|(% style="width:122px" %)HSW10067|(% colspan="2" style="width:506px" %)(((
	1090	+* Unit: ms.
	1091	+* Range: 0 to 30000
	1092	+)))
	1093	+|(% style="width:173px" %)Retry time|(% style="width:122px" %)HSW10068|(% colspan="2" style="width:506px" %)(((
	1094	+* Unit: times.
	1095	+* Range: 0 to 100
	1096	+)))
	1097	+|(% style="width:173px" %)Retry timeout|(% style="width:122px" %)HSW10069|(% colspan="2" style="width:506px" %)(((
	1098	+* Unit: s.
	1099	+* Range: 0 to 300
	1100	+)))
793	793	|(% style="width:173px" %)HMI station number|(% style="width:122px" %)HSW10070|(% colspan="2" style="width:506px" %)
794	794	|(% style="width:173px" %)PLC station number|(% style="width:122px" %)HSW10071|(% colspan="2" style="width:506px" %)
795	795	|(% colspan="1" rowspan="11" style="width:102px" %)COM1-2|(% style="width:173px" %)Communication mode|(% style="width:122px" %)HSW10094|(% colspan="2" style="width:506px" %)(((
...	...	@@ -822,10 +822,22 @@
822	822	* =1: ODD
823	823	* =2: EVEN
824	824	)))
825		-|(% style="width:173px" %)Wait timeout|(% style="width:122px" %)HSW10099|(% colspan="2" style="width:506px" %)Unit: ms. Range: 0~~30000
826		-|(% style="width:173px" %)receive timeout|(% style="width:122px" %)HSW10100|(% colspan="2" style="width:506px" %)Unit: ms. Range: 0~~30000
827		-|(% style="width:173px" %)Retry time|(% style="width:122px" %)HSW10101|(% colspan="2" style="width:506px" %)Unit: times. Range: 0~~100
828		-|(% style="width:173px" %)Retry timeout|(% style="width:122px" %)HSW10102|(% colspan="2" style="width:506px" %)Unit: s. Range: 0~~30
	1133	+|(% style="width:173px" %)Wait timeout|(% style="width:122px" %)HSW10099|(% colspan="2" style="width:506px" %)(((
	1134	+* Unit: ms.
	1135	+* Range: 0 to 30000
	1136	+)))
	1137	+|(% style="width:173px" %)receive timeout|(% style="width:122px" %)HSW10100|(% colspan="2" style="width:506px" %)(((
	1138	+* Unit: ms.
	1139	+* Range: 0 to 30000
	1140	+)))
	1141	+|(% style="width:173px" %)Retry time|(% style="width:122px" %)HSW10101|(% colspan="2" style="width:506px" %)(((
	1142	+* Unit: times.
	1143	+* Range: 0 to 100
	1144	+)))
	1145	+|(% style="width:173px" %)Retry timeout|(% style="width:122px" %)HSW10102|(% colspan="2" style="width:506px" %)(((
	1146	+* Unit: s.
	1147	+* Range: 0 to 30
	1148	+)))
829	829	|(% style="width:173px" %)HMI station number|(% style="width:122px" %)HSW10103|(% colspan="2" style="width:506px" %)
830	830	|(% style="width:173px" %)PLC station number|(% style="width:122px" %)HSW10104|(% colspan="2" style="width:506px" %)
831	831	|(% colspan="1" rowspan="11" style="width:102px" %)COM1-3|(% style="width:173px" %)Communication mode|(% style="width:122px" %)HSW10120|(% colspan="2" style="width:506px" %)(((
...	...	@@ -858,10 +858,22 @@
858	858	* =1: ODD
859	859	* =2: EVEN
860	860	)))
861		-|(% style="width:173px" %)Wait timeout|(% style="width:122px" %)HSW10125|(% colspan="2" style="width:506px" %)Unit: ms. Range: 0~~30000
862		-|(% style="width:173px" %)receive timeout|(% style="width:122px" %)HSW10126|(% colspan="2" style="width:506px" %)Unit: ms. Range: 0~~30000
863		-|(% style="width:173px" %)Retry time|(% style="width:122px" %)HSW10127|(% colspan="2" style="width:506px" %)Unit: times. Range: 0~~100
864		-|(% style="width:173px" %)Retry timeout|(% style="width:122px" %)HSW10128|(% colspan="2" style="width:506px" %)Unit: s. Range: 0~~30
	1181	+|(% style="width:173px" %)Wait timeout|(% style="width:122px" %)HSW10125|(% colspan="2" style="width:506px" %)(((
	1182	+* Unit: ms.
	1183	+* Range: 0 to 30000
	1184	+)))
	1185	+|(% style="width:173px" %)receive timeout|(% style="width:122px" %)HSW10126|(% colspan="2" style="width:506px" %)(((
	1186	+* Unit: ms.
	1187	+* Range: 0 to 30000
	1188	+)))
	1189	+|(% style="width:173px" %)Retry time|(% style="width:122px" %)HSW10127|(% colspan="2" style="width:506px" %)(((
	1190	+* Unit: times.
	1191	+* Range: 0 to 100
	1192	+)))
	1193	+|(% style="width:173px" %)Retry timeout|(% style="width:122px" %)HSW10128|(% colspan="2" style="width:506px" %)(((
	1194	+* Unit: s.
	1195	+* Range: 0 to 30
	1196	+)))
865	865	|(% style="width:173px" %)HMI station number|(% style="width:122px" %)HSW10129|(% colspan="2" style="width:506px" %)
866	866	|(% style="width:173px" %)PLC station number|(% style="width:122px" %)HSW10130|(% colspan="2" style="width:506px" %)
867	867	|(% colspan="1" rowspan="11" style="width:102px" %)COM2|(% style="width:173px" %)Communication mode|(% style="width:122px" %)HSW10072|(% colspan="2" style="width:506px" %)(((
...	...	@@ -892,10 +892,22 @@
892	892	* =1: ODD
893	893	* =2: EVEN
894	894	)))
895		-|(% style="width:173px" %)Wait timeout|(% style="width:122px" %)HSW10077|(% colspan="2" style="width:506px" %)Unit: ms. Range: 0~~30000
896		-|(% style="width:173px" %)receive timeout|(% style="width:122px" %)HSW10078|(% colspan="2" style="width:506px" %)Unit: ms. Range: 0~~30000
897		-|(% style="width:173px" %)Retry time|(% style="width:122px" %)HSW10079|(% colspan="2" style="width:506px" %)Unit: times. Range: 0~~100
898		-|(% style="width:173px" %)Retry timeout|(% style="width:122px" %)HSW10080|(% colspan="2" style="width:506px" %)Unit: s. Range: 0~~30
	1227	+|(% style="width:173px" %)Wait timeout|(% style="width:122px" %)HSW10077|(% colspan="2" style="width:506px" %)(((
	1228	+* Unit: ms.
	1229	+* Range: 0 to 30000
	1230	+)))
	1231	+|(% style="width:173px" %)receive timeout|(% style="width:122px" %)HSW10078|(% colspan="2" style="width:506px" %)(((
	1232	+* Unit: ms.
	1233	+* Range: 0 to 30000
	1234	+)))
	1235	+|(% style="width:173px" %)Retry time|(% style="width:122px" %)HSW10079|(% colspan="2" style="width:506px" %)(((
	1236	+* Unit: times.
	1237	+* Range: 0 to 100
	1238	+)))
	1239	+|(% style="width:173px" %)Retry timeout|(% style="width:122px" %)HSW10080|(% colspan="2" style="width:506px" %)(((
	1240	+* Unit: s.
	1241	+* Range: 0 to 30
	1242	+)))
899	899	|(% style="width:173px" %)HMI station number|(% style="width:122px" %)HSW10081|(% colspan="2" style="width:506px" %)
900	900	|(% style="width:173px" %)PLC station number|(% style="width:122px" %)HSW10082|(% colspan="2" style="width:506px" %)
901	901	|(% colspan="1" rowspan="11" style="width:102px" %)COM2-2|(% style="width:173px" %)Communication mode|(% style="width:122px" %)HSW10105|(% colspan="2" style="width:506px" %)(((
...	...	@@ -926,10 +926,22 @@
926	926	* =1: ODD
927	927	* =2: EVEN
928	928	)))
929		-|(% style="width:173px" %)Wait timeout|(% style="width:122px" %)HSW10110|(% colspan="2" style="width:506px" %)Unit: ms. Range: 0~~30000
930		-|(% style="width:173px" %)receive timeout|(% style="width:122px" %)HSW10111|(% colspan="2" style="width:506px" %)Unit: ms. Range: 0~~30000
931		-|(% style="width:173px" %)Retry time|(% style="width:122px" %)HSW10112|(% colspan="2" style="width:506px" %)Unit: times. Range: 0~~100
932		-|(% style="width:173px" %)Retry timeout|(% style="width:122px" %)HSW10113|(% colspan="2" style="width:506px" %)Unit: s. Range: 0~~30
	1273	+|(% style="width:173px" %)Wait timeout|(% style="width:122px" %)HSW10110|(% colspan="2" style="width:506px" %)(((
	1274	+* Unit: ms.
	1275	+* Range: 0 to 30000
	1276	+)))
	1277	+|(% style="width:173px" %)receive timeout|(% style="width:122px" %)HSW10111|(% colspan="2" style="width:506px" %)(((
	1278	+* Unit: ms.
	1279	+* Range: 0 to 30000
	1280	+)))
	1281	+|(% style="width:173px" %)Retry time|(% style="width:122px" %)HSW10112|(% colspan="2" style="width:506px" %)(((
	1282	+* Unit: times.
	1283	+* Range: 0 to 100
	1284	+)))
	1285	+|(% style="width:173px" %)Retry timeout|(% style="width:122px" %)HSW10113|(% colspan="2" style="width:506px" %)(((
	1286	+* Unit: s.
	1287	+* Range: 0 to 30
	1288	+)))
933	933	|(% style="width:173px" %)HMI station number|(% style="width:122px" %)HSW10114|(% colspan="2" style="width:506px" %)
934	934	|(% style="width:173px" %)PLC station number|(% style="width:122px" %)HSW10115|(% colspan="2" style="width:506px" %)
935	935	|(% colspan="1" rowspan="11" style="width:102px" %)COM3|(% style="width:173px" %)Communication mode|(% style="width:122px" %)HSW10083|(% colspan="2" style="width:506px" %)(((
...	...	@@ -959,29 +959,48 @@
959	959	* =1: ODD
960	960	* =2: EVEN
961	961	)))
962		-|(% style="width:173px" %)Wait timeout|(% style="width:122px" %)HSW10088|(% colspan="2" style="width:506px" %)Unit: ms. Range: 0~~30000
963		-|(% style="width:173px" %)receive timeout|(% style="width:122px" %)HSW10089|(% colspan="2" style="width:506px" %)Unit: ms. Range: 0~~30000
964		-|(% style="width:173px" %)Retry time|(% style="width:122px" %)HSW10090|(% colspan="2" style="width:506px" %)Unit: times. Range: 0~~100
965		-|(% style="width:173px" %)Retry timeout|(% style="width:122px" %)HSW10091|(% colspan="2" style="width:506px" %)Unit: s. Range: 0~~30
	1318	+|(% style="width:173px" %)Wait timeout|(% style="width:122px" %)HSW10088|(% colspan="2" style="width:506px" %)(((
	1319	+* Unit: ms.
	1320	+* Range: 0 to 30000
	1321	+)))
	1322	+|(% style="width:173px" %)receive timeout|(% style="width:122px" %)HSW10089|(% colspan="2" style="width:506px" %)(((
	1323	+* Unit: ms.
	1324	+* Range: 0 to 30000
	1325	+)))
	1326	+|(% style="width:173px" %)Retry time|(% style="width:122px" %)HSW10090|(% colspan="2" style="width:506px" %)(((
	1327	+* Unit: times.
	1328	+* Range: 0 to 100
	1329	+)))
	1330	+|(% style="width:173px" %)Retry timeout|(% style="width:122px" %)HSW10091|(% colspan="2" style="width:506px" %)(((
	1331	+* Unit: s.
	1332	+* Range: 0 to 30
	1333	+)))
966	966	|(% style="width:173px" %)HMI station number|(% style="width:122px" %)HSW10092|(% colspan="2" style="width:506px" %)
967	967	|(% style="width:173px" %)PLC station number|(% style="width:122px" %)HSW10093|(% colspan="2" style="width:506px" %)
968	968	|(% colspan="1" rowspan="2" style="width:102px" %)CAN port|(% style="width:173px" %)CAN1 baud rate|(% style="width:122px" %)HSW010116|(% style="width:299px" %)(((
969		-Unit: K, the baud rate must be an integer, for example, when the baud rate required is 250000, just enter 250.
	1337	+Unit: K, the baud rate must be an integer.
	1338	+
	1339	+For example, when the baud rate required is 250000, just enter 250.
970	970	)))|(% colspan="1" rowspan="2" style="width:218px" %)**✎Note: **If baud rate has been modified,please wait 5 seconds,then restart the HMI to take effect.
971		-|(% style="width:173px" %)CAN2 baud rate|(% style="width:122px" %)HSW010117|(% style="width:299px" %)Unit: K, the baud rate must be an integer, for example, when the baud rate required is 250000, just enter 250.
	1341	+|(% style="width:173px" %)CAN2 baud rate|(% style="width:122px" %)HSW010117|(% style="width:299px" %)(((
	1342	+Unit: K, the baud rate must be an integer.
972	972
973		-== **Ethernet communication configuration** ==
	1344	+For example, when the baud rate required is 250000, just enter 250.
	1345	+)))
974	974
	1347	+== Ethernet communication configuration ==
	1348	+
975	975	(% class="table-bordered" %)
976		-|=(% style="width: 40px;" %)**No.**|=(% style="width: 295px;" %)**Function**|=(% style="width: 220px;" %)**Address**|=(% style="width: 336px;" %)**Description**
	1350	+|(% style="width:40px" %)**No.**|(% style="width:295px" %)**Function**|(% style="width:220px" %)**Address**|(% style="width:336px" %)**Description**
977	977	|(% rowspan="7" style="width:40px" %)1|(% colspan="1" rowspan="7" style="width:295px" %)Ethernet parameter configuration for communication number 1 in list. Configure those addresses according to connected device. After configuration, wait for 5 seconds and restart the HMI.|(% style="width:220px" %)HSW11004|(% style="width:336px" %)Device IP address high word 1
978	978	|(% style="width:220px" %)HSW11005|(% style="width:336px" %)Device IP address high word 2
979	979	|(% style="width:220px" %)HSW11006|(% style="width:336px" %)Device IP address high word 3
980	980	|(% style="width:220px" %)HSW11007|(% style="width:336px" %)Device IP address high word 4
981	981	|(% style="width:220px" %)HSW11008|(% style="width:336px" %)Device Port number
982		-|(% style="width:220px" %)HSW11009|=(% style="width: 336px;" %)(((
983		-* =2 TCP
984		-* =3 UDP
	1356	+|(% style="width:220px" %)HSW11009|(% style="width:336px" %)(((
	1357	+~=2 TCP
	1358	+
	1359	+~=3 UDP
985	985	)))
986	986	|(% style="width:220px" %)HSW11010|(% style="width:336px" %)Reserved
987	987	|(% rowspan="7" style="width:40px" %)2|(% colspan="1" rowspan="7" style="width:295px" %)Ethernet parameter configuration for communication number 2 in list. Configure those addresses according to connected device. After configuration, wait for 5 seconds and restart the HMI.|(% style="width:220px" %)HSW11011|(% style="width:336px" %)Device IP address high word 1
...	...	@@ -989,9 +989,10 @@
989	989	|(% style="width:220px" %)HSW11013|(% style="width:336px" %)Device IP address high word 3
990	990	|(% style="width:220px" %)HSW11014|(% style="width:336px" %)Device IP address high word 4
991	991	|(% style="width:220px" %)HSW11015|(% style="width:336px" %)Device Port number
992		-|(% style="width:220px" %)HSW11016|=(% style="width: 336px;" %)(((
993		-* =2 TCP
994		-* =3 UDP
	1367	+|(% style="width:220px" %)HSW11016|(% style="width:336px" %)(((
	1368	+~=2 TCP
	1369	+
	1370	+~=3 UDP
995	995	)))
996	996	|(% style="width:220px" %)HSW11017|(% style="width:336px" %)Reserved
997	997	|(% style="width:40px" %)…|(% style="width:295px" %) |(% style="width:220px" %)…|(% style="width:336px" %)…
...	...	@@ -1000,7 +1000,11 @@
1000	1000	|(% style="width:220px" %)HSW11223|(% style="width:336px" %)Device IP address high word 3
1001	1001	|(% style="width:220px" %)HSW11224|(% style="width:336px" %)Device IP address high word 4
1002	1002	|(% style="width:220px" %)HSW11225|(% style="width:336px" %)Device Port number
1003		-|(% style="width:220px" %)HSW11226|=(% style="width: 336px;" %)2 TCP; =3 UDP
	1379	+|(% style="width:220px" %)HSW11226|(% style="width:336px" %)(((
	1380	+~=2 TCP;
	1381	+
	1382	+~=3 UDP
	1383	+)))
1004	1004	|(% style="width:220px" %)HSW11227|(% style="width:336px" %)Reserved
1005	1005
1006	1006	(% class="box infomessage" %)
...	...	@@ -1008,7 +1008,7 @@
1008	1008	**✎Note:** The number of Ethernet connections supported by different HMI series varies.
1009	1009	)))
1010	1010
1011		-== **Communication control** ==
	1391	+== Communication control ==
1012	1012
1013	1013	(% class="table-bordered" %)
1014	1014	|=(% style="width: 135px;" %)**Communication No.**|=(% style="width: 102px;" %)**Station No.**|=(% style="width: 185px;" %)**Control bit**|=(% style="width: 191px;" %)**Communication lamp**|=(% style="width: 271px;" %)**Description**

6.png

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.Mora

Size

...	...	@@ -1,0 +1,1 @@
	1	+20.1 KB

Content