Changes for page 13 HMI Internal Registers

Summary

• Page properties (3 modified, 0 added, 0 removed)
• Attachments (0 modified, 1 added, 0 removed)
  • 6.png

Details

Page properties

Title

...	...	@@ -1,1 +1,1 @@
1		-12 HMI internal registers
	1	+13.HMI Internal Registers

Author

...	...	@@ -1,1 +1,1 @@
1		-XWiki.Stone
	1	+XWiki.Mora

Content

...	...	@@ -4,11 +4,11 @@
4	4
5	5	*HSW, HDW, HUW, HAW are word address, HSX, HDX, HUX, HAX are bit address.
6	6
7		-1. **System data area (HSW): **A special register defined by the system.
8		-1. **Data storage area (HDW/HDX): **Users store user data.
9		-1. **System data area (HUW): **A special register defined by the system.
10		-1. **System Data (HAW)**: System register used for power-off save.
11		-1. **Recipe index area (RPW): **System register used for recipe index.
	7	+* **System data area (HSW): **A special register defined by the system.
	8	+* **Data storage area (HDW/HDX): **Users store user data.
	9	+* **System data area (HUW): **A special register defined by the system.
	10	+* **System Data (HAW)**: System register used for power-off save.
	11	+* **Recipe index area (RPW): **System register used for recipe index.
12	12
13	13	HMI internal registers are divided into bit address and word address, which can be accessed in two ways (take HDW as an example).
14	14
...	...	@@ -25,6 +25,11 @@
25	25	* The address of the bit address HDX is with a decimal point while word addresses are integers.
26	26	)))
27	27
	28	+= Address ranges table =
	29	+
	30	+(% style="text-align:center" %)
	31	+[[image:6.png]]
	32	+
28	28	= **Data storage area (HDW/HDX)** =
29	29
30	30	It is used to save the temporary data of project.
...	...	@@ -51,17 +51,20 @@
51	51
52	52	It is system recipe data power-off save register. The range is from RPW000000 to RPW990450.
53	53
	59	+(% class="box infomessage" %)
	60	+(((
54	54	**✎Note:**
55	55
56	56	* RPW is power-down retention. The register of this type is able to save the data before the power-down.
57	57	* To avoid possible device failure, do not immediately power off and reboot when configuring the power-down save addre
	65	+)))
58	58
59	59	= **Single user data area (HUW/HUX)** =
60	60
61	61	It is used for system special registers (reserved by system).
62	62
63		-1. Access as word, and serial number range is from HUW0 to HUW199999.
64		-1. Access as bit, and serial number range is from HUX0.0 to HUX199999.15.
	71	+1. Access as word, and serial number range is from HUW0 to HUW1599.
	72	+1. Access as bit, and serial number range is from HUX0.0 to HUX1599.15.
65	65
66	66	**✎Note:**
67	67
...	...	@@ -135,8 +135,8 @@
135	135	(% class="table-bordered" style="width:1024px" %)
136	136	|=(% scope="row" style="width: 160px;" %)**Address**|=(% style="width: 282px;" %)**Function**|=(% style="width: 452px;" %)**Description**
137	137	|=(% style="width: 160px;" %)HSW0|(% style="width:282px" %)Language switch|(% style="width:452px" %)Multiple language could be set in the project, HMI support maximum 8 languages. (Power-down save supported)
138		-|=(% style="width: 160px;" %)HSW1|(% style="width:282px" %)Beep frequency|(% style="width:452px" %)Frequency range: 0~~4000
139		-|=(% style="width: 160px;" %)HSW2|(% style="width:282px" %)Beep volume|(% style="width:452px" %)Volume range: 0~~80
	146	+|=(% style="width: 160px;" %)HSW1|(% style="width:282px" %)Beep frequency (Only valid in HMI V1.0 System)|(% style="width:452px" %)Frequency range: 0~~4000
	147	+|=(% style="width: 160px;" %)HSW2|(% style="width:282px" %)Beep volume (Only valid in HMI V1.0 System)|(% style="width:452px" %)Volume range: 0~~80
140	140	|=(% style="width: 160px;" %)HSW3|(% style="width:282px" %)Beep time|(% style="width:452px" %)Unit: ms
141	141	|=(% style="width: 160px;" %)HSW4|(% style="width:282px" %)Beep whether enable or not|(% style="width:452px" %)(((
142	142	* =0: Enable.
...	...	@@ -150,7 +150,7 @@
150	150	)))
151	151	|=(% style="width: 160px;" %)HSW6~~HSW7|(% style="width:282px" %)Number of alarms|(% style="width:452px" %)The number of alarm (it also includes the records of alarm confirmed)
152	152	|=(% style="width: 160px;" %)HSW8|(% style="width:282px" %)Number of unconfirmed history alarm|(% style="width:452px" %)The number of unconfirmed history alarm
153		-|=(% style="width: 160px;" %)HSW9|(% style="width:282px" %)Time out tip|(% style="width:452px" %)(((
	161	+|=(% style="width: 160px;" %)HSW9|(% style="width:282px" %)Time out prompt|(% style="width:452px" %)(((
154	154	* =0: Enable
155	155	* =1: Disable
156	156	)))
...	...	@@ -175,6 +175,7 @@
175	175	* =5: Friday.
176	176	* =6: Saturday.
177	177	)))
	186	+|=(% style="width: 160px;" %)HSW39|(% style="width:282px" %)Beep type(Only valid in HMI V2.0 System)|(% style="width:452px" %)Type range: 1-5, Default is 1.
178	178	|=(% style="width: 160px;" %)HSW134|(% style="width:282px" %)(((
179	179	Whether the Script is read through
180	180
...	...	@@ -241,8 +241,8 @@
241	241	* =2: HSX521.1=1, delete all trend graph.
242	242	* =4: HSX521.2=1, delete all alarms.
243	243	* =16: HSX521.4=1, delete history XY plot.
244		-* =32: HSX521.5=1, delete data records in SD card or flash dish;(Please make a setting which is saved to flash disk or SD card in project setting).
245		-* =64: HSX521.6=1, delete alarms records in SD card or flash dish; (Please make a setting which is saved to flash disk or SD card in project setting).
	253	+* =32: HSX521.5=1, delete data records in SD card or USB flash disk;(Please make a setting which is saved to USB flash disk or SD card in project setting).
	254	+* =64: HSX521.6=1, delete alarms records in SD card or USB flash disk; (Please make a setting which is saved to USB flash disk or SD card in project setting).
246	246	)))
247	247	|=(% style="width: 160px;" %)HSW522|(% style="width:282px" %)Copy and paste the alarm/data files in flash to the USB flash disk|(% style="width:452px" %)(((
248	248	* =0: No operation
...	...	@@ -450,7 +450,7 @@
450	450	Address mapping polling cycle, effective range: 40~~1000ms, default: 300ms.
451	451
452	452	* When the set value is greater than 1000, the value is 1000.
453		-* When the set value is greater than 1000, it changes to the default value 300
	462	+* When the set value is lower than 40, it changes to the default value 300
454	454	)))
455	455	|=(% style="width: 160px;" %)HSW1087|(% style="width:282px" %)Control write interval in address mapping|(% style="width:452px" %)(((
456	456	After reading data to the device for N times, Perform an address mapping write operation. N is the interval value. The effective range: 0~~5, and default is 2.
...	...	@@ -485,6 +485,8 @@
485	485	* =0, Default value
486	486	* =1, Release the alarm generated before the last power-down when starting up
487	487	)))
	497	+|=(% style="width: 160px;" %)HSW1200|(% colspan="1" rowspan="2" style="width:282px" %)TSAP settings for HMI in the Siemens LOGO! 8 protocol(ig series or HMI V2.0)|(% style="width:452px" %)HMI local TSAP, which corresponds to the remote TSAP of PLC
	498	+|=(% style="width: 160px;" %)HSW1201|(% style="width:452px" %)HMI remote TSAP, which corresponds to the local TSAP of PLC
488	488	|=(% style="width: 160px;" %)HSW1450|(% style="width:282px" %)Enable objects level password function|(% style="width:452px" %)(((
489	489	* =0, Disable
490	490	* =1, Enable
...	...	@@ -591,6 +591,9 @@
591	591	* =0: Server connection exception
592	592	* =1: Server connection is OK
593	593	)))
	605	+|=(% style="width: 160px;" %)HSW1740|(% style="width:282px" %)Wi-fi signal strength|(% style="width:452px" %)(((
	606	+Display the value of Wi-fi signal signal strength, ranges from 0~~100 (Signal strength is automatically obtained only once when HMI is powered on, and it will not be automatically updated. It needs to be used with the HSW1890)
	607	+)))
594	594	|=(% style="width: 160px;" %)HSW1741|(% colspan="1" rowspan="12" style="width:282px" %)Related IP register in 4Gnetwork status (It is valid when HMI is connected to 4G)|(% style="width:452px" %)Local IP address high byte 1
595	595	|=(% style="width: 160px;" %)HSW1742|(% style="width:452px" %)Local IP address high byte 2
596	596	|=(% style="width: 160px;" %)HSW1743|(% style="width:452px" %)Local IP address high byte 3
...	...	@@ -618,10 +618,180 @@
618	618	* =1: Server connection is OK
619	619	)))
620	620	|=(% style="width: 160px;" %)HSW1761|(% style="width:282px" %)Display 4G network signal strength|(% style="width:452px" %)Signal strength: 0~~31. The greater the value ,the signal is stronger
	635	+|=(% style="width: 160px;" %)(((
	636	+HSW1762
	637	+)))|(% colspan="1" rowspan="13" style="width:282px" %)(((
	638	+Note: Valid when Ethernet2 of HMI is plugged into the network cable.
	639	+①、When the Ethernet setting is enabled in the project parameters, this register displays the set value.
	640	+②. When the Ethernet setting is not enabled in the engineering parameters, the register displays the Ethernet IP automatically acquired by the HMI.
	641	+③. When the HMI is not plugged into the network cable, the register will show 0 whether the engineering parameters are set or not.
	642	+④.IP related registers can be read and written (only static IP mode can be written).
	643	+)))|(% style="width:452px" %)(((
	644	+Ethernet2 Local IP address high byte 1
	645	+)))
	646	+|=(% style="width: 160px;" %)(((
	647	+HSW1763
	648	+)))|(% style="width:452px" %)(((
	649	+Ethernet2 Local IP address high byte 2
	650	+)))
	651	+|=(% style="width: 160px;" %)(((
	652	+HSW1764
	653	+)))|(% style="width:452px" %)(((
	654	+Ethernet2 Local IP address high byte 3
	655	+)))
	656	+|=(% style="width: 160px;" %)(((
	657	+HSW1765
	658	+)))|(% style="width:452px" %)(((
	659	+Ethernet2 Local IP address high byte 4
	660	+)))
	661	+|=(% style="width: 160px;" %)(((
	662	+HSW1766
	663	+)))|(% style="width:452px" %)(((
	664	+Ethernet2 Local mask IP address high byte 1
	665	+)))
	666	+|=(% style="width: 160px;" %)(((
	667	+HSW1767
	668	+)))|(% style="width:452px" %)(((
	669	+Ethernet2 Local mask IP address high byte 2
	670	+)))
	671	+|=(% style="width: 160px;" %)(((
	672	+HSW1768
	673	+)))|(% style="width:452px" %)Ethernet2 Local mask IP address high byte 3
	674	+|=(% style="width: 160px;" %)HSW1769|(% style="width:452px" %)Ethernet2 Local mask IP address high byte 4
	675	+|=(% style="width: 160px;" %)(((
	676	+HSW1770
	677	+)))|(% style="width:452px" %)(((
	678	+Ethernet2 Local gateway IP address high byte 1
	679	+)))
	680	+|=(% style="width: 160px;" %)(((
	681	+HSW1771
	682	+)))|(% style="width:452px" %)(((
	683	+Ethernet2 Local gateway IP address high byte 2
	684	+)))
	685	+|=(% style="width: 160px;" %)(((
	686	+HSW1772
	687	+)))|(% style="width:452px" %)(((
	688	+Ethernet2 Local gateway IP address high byte 3
	689	+)))
	690	+|=(% style="width: 160px;" %)(((
	691	+HSW1773
	692	+)))|(% style="width:452px" %)(((
	693	+Ethernet2 Local gateway IP address high byte 4
	694	+)))
	695	+|=(% style="width: 160px;" %)(((
	696	+HSW1774
	697	+)))|(% style="width:452px" %)(((
	698	+Ethernet2 Local Port Address
	699	+)))
	700	+|=(% style="width: 160px;" %)(((
	701	+HSW1775
	702	+)))|(% colspan="1" rowspan="6" style="width:282px" %)(((
	703	+①Display the MAC code of Ethernet2 NIC
	704	+
	705	+(hexadecimal display)
	706	+
	707	+②Read-only mode, not modifiable
	708	+)))|(% style="width:452px" %)(((
	709	+Ethernet2 Local MAC code high byte 1
	710	+)))
	711	+|=(% style="width: 160px;" %)(((
	712	+HSW1776
	713	+)))|(% style="width:452px" %)(((
	714	+Ethernet2 Local MAC code high byte 2
	715	+)))
	716	+|=(% style="width: 160px;" %)(((
	717	+HSW1777
	718	+)))|(% style="width:452px" %)(((
	719	+Ethernet2 Local MAC code high byte 3
	720	+)))
	721	+|=(% style="width: 160px;" %)(((
	722	+HSW1778
	723	+)))|(% style="width:452px" %)(((
	724	+Ethernet2 Local MAC code high byte 4
	725	+)))
	726	+|=(% style="width: 160px;" %)(((
	727	+HSW1779
	728	+)))|(% style="width:452px" %)(((
	729	+Ethernet2 Local MAC code high byte 5
	730	+)))
	731	+|=(% style="width: 160px;" %)(((
	732	+HSW1780
	733	+)))|(% style="width:452px" %)(((
	734	+Ethernet2 Local MAC code high byte 6
	735	+)))
	736	+|=(% style="width: 160px;" %)(((
	737	+HSW1781
	738	+)))|(% colspan="1" rowspan="8" style="width:282px" %)(((
	739	+①Display and modify DNS1 and DNS2 of Ethernet2
	740	+
	741	+②Related registers can be read and written mode (only static IP mode can be written)
	742	+)))|(% style="width:452px" %)(((
	743	+Ethernet2 Local DNS1 address high byte 1
	744	+)))
	745	+|=(% style="width: 160px;" %)(((
	746	+HSW1782
	747	+)))|(% style="width:452px" %)(((
	748	+Ethernet2 Local DNS1 address high byte 2
	749	+)))
	750	+|=(% style="width: 160px;" %)(((
	751	+HSW1783
	752	+)))|(% style="width:452px" %)(((
	753	+Ethernet2 Local DNS1 address high byte 3
	754	+)))
	755	+|=(% style="width: 160px;" %)(((
	756	+HSW1784
	757	+)))|(% style="width:452px" %)(((
	758	+Ethernet2 Local DNS1 address high byte 4
	759	+)))
	760	+|=(% style="width: 160px;" %)(((
	761	+HSW1785
	762	+)))|(% style="width:452px" %)(((
	763	+Ethernet2 Local DNS2 address high byte 1
	764	+)))
	765	+|=(% style="width: 160px;" %)(((
	766	+HSW1786
	767	+)))|(% style="width:452px" %)(((
	768	+Ethernet2 Local DNS2 address high byte 2
	769	+)))
	770	+|=(% style="width: 160px;" %)(((
	771	+HSW1787
	772	+)))|(% style="width:452px" %)(((
	773	+Ethernet2 Local DNS2 address high byte 3
	774	+)))
	775	+|=(% style="width: 160px;" %)(((
	776	+HSW1788
	777	+)))|(% style="width:452px" %)(((
	778	+Ethernet2 Local DNS2 address high byte 4
	779	+)))
	780	+|=(% style="width: 160px;" %)(((
	781	+HSW1789
	782	+)))|(% colspan="1" style="width:282px" %)(((
	783	+Display or set the dynamic or static IP mode of Ethernet2
	784	+)))|(% style="width:452px" %)(((
	785	+HSX1789.0 = 0, Static IP mode
	786	+
	787	+HSX1789.0 = 1, dynamic IP mode
	788	+)))
	789	+|=(% style="width: 160px;" %)(((
	790	+HSW1790
	791	+)))|(% colspan="1" style="width:282px" %)(((
	792	+Confirm Ethernet2 IP, subnet mask, gateway, DNS1, DNS2, and dynamic static IP settings
	793	+)))|(% style="width:452px" %)(((
	794	+~= 1, confirm the setting (i.e., after modifying IP-related information, set this address to 1, representing confirmation of the modification, after which it will be reset to 0)
	795	+)))
	796	+|=(% style="width: 160px;" %)(((
	797	+HSW1791
	798	+)))|(% colspan="1" style="width:282px" %)(((
	799	+Network status of the Ethernet2 connection server
	800	+)))|(% style="width:452px" %)(((
	801	+~= 0, connection to the server is abnormal = 1, connection to the server is normal
	802	+)))
621	621	|=(% style="width: 160px;" %)HSW1852|(% style="width:282px" %)Control the interval in two consecutive clicks|(% style="width:452px" %)Limit range: 1~~500ms. The default is 100 ms.
622	622	|=(% style="width: 160px;" %)HSW1853|(% style="width:282px" %)File format for exporting data records to USB flash drive or SD card|(% style="width:452px" %)(((
623	623	* =0: db database
624	624	* =1: CSV
	807	+
	808	+(Only valid for script function DbToCsvFile)
625	625	)))
626	626	|=(% style="width: 160px;" %)HSW1854|(% style="width:282px" %)High and low word conversion type|(% style="width:452px" %)(((
627	627	* =0: use the old high-low word conversion (default)
...	...	@@ -643,14 +643,96 @@
643	643	* =1: download firmware
644	644	* =2: enter the background
645	645	)))
	830	+|=(% style="width: 160px;" %)HSW1865|(% style="width:282px" %)Priority connection to the cloud|(% style="width:452px" %)(((
	831	+* =0: priority Ethernet
	832	+* =1: priority WLAN
	833	+* =2: priority 4G
	834	+)))
	835	+|=(% style="width: 160px;" %)HSW1866|(% style="width:282px" %)Delete the Lua extension module file|(% style="width:452px" %)(((
	836	+* =0: delete;
	837	+* = Others: do not delete
	838	+)))
	839	+|=(% style="width: 160px;" %)HSW1867|(% style="width:282px" %)Reset mode|(% style="width:452px" %)(((
	840	+Monitor address is set during reset of reset switch, whether to cancel reset,
	841	+
	842	+* = 0: yes (default);
	843	+* = 1: no
	844	+)))
	845	+|=(% style="width: 160px;" %)HSW1868|(% style="width:282px" %)Double-click or long press the record type table mode|(% style="width:452px" %)(((
	846	+Controls whether the button pops up when double-clicking or long pressing on record type table object
	847	+
	848	+* = 0: yes (default);
	849	+* = 1: no
	850	+)))
	851	+|=(% style="width: 160px;" %)(((
	852	+HSW1869
	853	+)))|(% style="width:282px" %)(((
	854	+Dynamic screensaver countdown
	855	+)))|(% style="width:452px" %)(((
	856	+Countdown to enter dynamic screensaver effect, unit (S)
	857	+)))
	858	+|=(% style="width: 160px;" %)(((
	859	+HSW1870
	860	+)))|(% style="width:282px" %)(((
	861	+Display or set the dynamic or static IP mode of Ethernet1
	862	+)))|(% style="width:452px" %)(((
	863	+HSX1870.0 = 0, Static IP mode
	864	+
	865	+HSX1870.0 = 1, dynamic IP mode
	866	+)))
	867	+|=(% style="width: 160px;" %)(((
	868	+HSW1871
	869	+)))|(% style="width:282px" %)(((
	870	+Confirm the IP, subnet mask, gateway, DNS1, DNS2, and dynamic static IP settings for Ethernet1
	871	+)))|(% style="width:452px" %)(((
	872	+~= 1, confirm the setting (i.e., after modifying IP-related information, set this address to 1, representing confirmation of the modification, after which it will be reset to 0)
	873	+)))
	874	+|=(% style="width: 160px;" %)(((
	875	+HSW1872
	876	+)))|(% colspan="1" rowspan="8" style="width:282px" %)(((
	877	+①Display and modify DNS1 and DNS2 of Ethernet1
	878	+
	879	+②Related registers can be read and written mode (only static IP mode can be written)
	880	+)))|(% style="width:452px" %)(((
	881	+Ethernet1 Local DNS1 address high byte 1
	882	+)))
	883	+|=(% style="width: 160px;" %)(((
	884	+HSW1873
	885	+)))|(% style="width:452px" %)Ethernet1 Local DNS1 address high byte 2
	886	+|=(% style="width: 160px;" %)(((
	887	+HSW1874
	888	+)))|(% style="width:452px" %)Ethernet1 Local DNS1 address high byte 3
	889	+|=(% style="width: 160px;" %)(((
	890	+HSW1875
	891	+)))|(% style="width:452px" %)Ethernet1 Local DNS1 address high byte 4
	892	+|=(% style="width: 160px;" %)(((
	893	+HSW1876
	894	+)))|(% style="width:452px" %)Ethernet1 Local DNS2 address high byte 1
	895	+|=(% style="width: 160px;" %)(((
	896	+HSW1877
	897	+)))|(% style="width:452px" %)Ethernet1 Local DNS2 address high byte 2
	898	+|=(% style="width: 160px;" %)(((
	899	+HSW1878
	900	+)))|(% style="width:452px" %)Ethernet1 Local DNS2 address high byte 3
	901	+|=(% style="width: 160px;" %)(((
	902	+HSW1879
	903	+)))|(% style="width:452px" %)Ethernet1 Local DNS2 address high byte 4
	904	+|=(% style="width: 160px;" %)HSW1890|(% colspan="1" style="width:282px" %)Enable refresh current network signal|(% style="width:452px" %)(((
	905	+* =1: Refresh the network signal once after triggered (This register will be automatically reset after triggered, only update the signal value once after per 15 seconds, not able to update twice in the short interval)
	906	+* =Others: not refresh
	907	+)))
	908	+|=(% style="width: 160px;" %)HSW1891|(% colspan="1" style="width:282px" %)Enable clear cache for screen data  |(% style="width:452px" %)(((
	909	+* =1, not clear screen cache when switch language
	910	+* =2, trigger clear cache of all screens for once time
	911	+* =3, always clear cache of all screen data
	912	+)))
646	646	|=(% style="width: 160px;" %)HSW10000~~19999|(% style="width:282px" %)Power-down storage area|(% style="width:452px" %)After restart, the data remains
647	647	|=(% style="width: 160px;" %)HSW10035|(% rowspan="13" style="width:282px" %)(((
648		-**✎Note: **Only valid when the HMI is plugged into the Ethernet cable.
649		-
650		-1. If Ethernet settings is enabled in project parameters, this register displays the set value.
651		-1. If Ethernet settings is not enabled in project parameters, IP would automatically obtained IP.
652		-1. If HMI is not connected to the network, the register is displayed as 0 whether the engineering parameters are set.
653		-1. 4. All IP registers of HMI are read-only.
	915	+Note: Valid when Ethernet1 of HMI is plugged into the network cable.
	916	+① When the Ethernet setting is enabled in the project parameters, this register displays the set value.
	917	+② When the Ethernet setting is not enabled in the engineering parameters, the register displays the Ethernet IP automatically acquired by the HMI.
	918	+③ When the HMI is not plugged into the network cable, the register will show 0 whether the engineering parameters are set or not.
	919	+④ IP related registers can be read and written (only static IP mode can be written).
654	654	)))|(% style="width:452px" %)Local IP address high byte 1
655	655	|=(% style="width: 160px;" %)HSW10036|(% style="width:452px" %)Local IP address high byte 2
656	656	|=(% style="width: 160px;" %)HSW10037|(% style="width:452px" %)Local IP address high byte 3
...	...	@@ -665,9 +665,11 @@
665	665	|=(% style="width: 160px;" %)HSW10046|(% style="width:452px" %)Local gateway address high byte 4
666	666	|=(% style="width: 160px;" %)HSW10047|(% style="width:452px" %)Local port address
667	667	|=(% style="width: 160px;" %)HSW10048|(% rowspan="6" style="width:282px" %)(((
668		-Displays the MAC code of the current network card
	934	+①Display the MAC code of Ethernet1 NIC
669	669
670		-(Hexadecimal display)
	936	+(hexadecimal display)
	937	+
	938	+②Read-only mode, not modifiable
671	671	)))|(% style="width:452px" %)Local MAC code high word 1
672	672	|=(% style="width: 160px;" %)HSW10049|(% style="width:452px" %)Local MAC code high word 2
673	673	|=(% style="width: 160px;" %)HSW10050|(% style="width:452px" %)Local MAC code high word 3
...	...	@@ -674,7 +674,7 @@
674	674	|=(% style="width: 160px;" %)HSW10051|(% style="width:452px" %)Local MAC code high word 4
675	675	|=(% style="width: 160px;" %)HSW10052|(% style="width:452px" %)Local MAC code high word 5
676	676	|=(% style="width: 160px;" %)HSW10053|(% style="width:452px" %)Local MAC code high word 6
677		-|=(% style="width: 160px;" %)HSW10118|(% colspan="1" rowspan="2" style="width:282px" %)TSAP settings for HMI in the Siemens logo! 8 protocol|(% style="width:452px" %)HMI local TSAP, which corresponds to the remote TSAP of PLC
	945	+|=(% style="width: 160px;" %)HSW10118|(% colspan="1" rowspan="2" style="width:282px" %)TSAP settings for HMI in the Siemens LOGO! 8 protocol|(% style="width:452px" %)HMI local TSAP, which corresponds to the remote TSAP of PLC
678	678	|=(% style="width: 160px;" %)HSW10119|(% style="width:452px" %)HMI remote TSAP, which corresponds to the local TSAP of PLC
679	679	|=(% style="width: 160px;" %)HSW10461~~10493|(% style="width:282px" %)Remote access password|(% style="width:452px" %)8-character remote access password
680	680	|=(% style="width: 160px;" %)HSW10494~~10558|(% style="width:282px" %)Machine ID (Read only)|(% style="width:452px" %)Machine ID for remote access (read only 64-bit)
...	...	@@ -742,6 +742,7 @@
742	742	* =0: LAN or the external network both OK
743	743	* =1: Only LAN access
744	744	* =2: Only external network can access
	1013	+* =3: Close the functions
745	745	)))
746	746	|=(% style="width: 160px;" %)HSW11757|(% style="width:282px" %)Enable the valid date of the dynamic installment password|(% style="width:452px" %)(((
747	747	* =0: Disabled
...	...	@@ -756,11 +756,38 @@
756	756	)))
757	757	|=(% style="width: 160px;" %)HSW11760|(% style="width:282px" %)Screensaver countdown|(% style="width:452px" %)Display the countdown to enter the Screensaver, unit: second.
758	758	|=(% style="width: 160px;" %)HSW11761|(% style="width:282px" %)Screensaver screen number|(% style="width:452px" %)Set the screen number for Screensaver
	1028	+|=(% style="width: 160px;" %)(((
	1029	+HSW11762
	1030	+)))|(% style="width:282px" %)(((
	1031	+Dynamic screensaver control address
	1032	+)))|(% style="width:452px" %)(((
	1033	+HSX11762.0=0, initialize with project configuration;
759	759
760		-== **Serial port communication configuration** ==
	1035	+HSX11762.0=1, initialize with special register configuration;
761	761
	1037	+HSX11762.1=0, disable dynamic screensaver;
	1038	+
	1039	+HSX11762.1=1, enable dynamic screensaver
	1040	+)))
	1041	+|=(% style="width: 160px;" %)(((
	1042	+HSW11763
	1043	+)))|(% style="width:282px" %)(((
	1044	+Waiting time to enter the dynamic screensaver
	1045	+)))|(% style="width:452px" %)(((
	1046	+Waiting time when the screen is not operated, range 1~~720 minutes
	1047	+)))
	1048	+|=(% style="width: 160px;" %)(((
	1049	+HSW11764
	1050	+)))|(% style="width:282px" %)(((
	1051	+Animated screensaver animation type
	1052	+)))|(% style="width:452px" %)(((
	1053	+~=0: Raster,=1: Blinds,=2: Bubble
	1054	+)))
	1055	+
	1056	+== Serial port communication configuration ==
	1057	+
762	762	(% class="table-bordered" %)
763		-|=(% style="width: 102px;" %)Port|=(% style="width: 173px;" %)**Function**|=(% style="width: 122px;" %)**Address**|=(% colspan="2" style="width: 506px;" %)**Description**
	1059	+|=(% scope="row" style="width: 102px;" %)Port|=(% style="width: 173px;" %)**Function**|=(% style="width: 122px;" %)**Address**|=(% colspan="2" style="width: 506px;" %)**Description**
764	764	|(% colspan="1" rowspan="11" style="width:102px" %)COM1|(% style="width:173px" %)Communication mode|(% style="width:122px" %)HSW10061|(% colspan="2" style="width:506px" %)(((
765	765	* =0: RS232
766	766	* =1: RS485
...	...	@@ -790,10 +790,22 @@
790	790	* =1: ODD
791	791	* =2: EVEN
792	792	)))
793		-|(% style="width:173px" %)Wait timeout|(% style="width:122px" %)HSW10066|(% colspan="2" style="width:506px" %)Unit: ms. Range: 0~~30000
794		-|(% style="width:173px" %)reveive timeout|(% style="width:122px" %)HSW10067|(% colspan="2" style="width:506px" %)Unit: ms. Range: 0~~30000
795		-|(% style="width:173px" %)Retry time|(% style="width:122px" %)HSW10068|(% colspan="2" style="width:506px" %)Unit: times. Range: 0~~100
796		-|(% style="width:173px" %)Retry timeout|(% style="width:122px" %)HSW10069|(% colspan="2" style="width:506px" %)Unit: s. Range: 0~~300
	1089	+|(% style="width:173px" %)Wait timeout|(% style="width:122px" %)HSW10066|(% colspan="2" style="width:506px" %)(((
	1090	+* Unit: ms.
	1091	+* Range: 0 to 30000
	1092	+)))
	1093	+|(% style="width:173px" %)reveive timeout|(% style="width:122px" %)HSW10067|(% colspan="2" style="width:506px" %)(((
	1094	+* Unit: ms.
	1095	+* Range: 0 to 30000
	1096	+)))
	1097	+|(% style="width:173px" %)Retry time|(% style="width:122px" %)HSW10068|(% colspan="2" style="width:506px" %)(((
	1098	+* Unit: times.
	1099	+* Range: 0 to 100
	1100	+)))
	1101	+|(% style="width:173px" %)Retry timeout|(% style="width:122px" %)HSW10069|(% colspan="2" style="width:506px" %)(((
	1102	+* Unit: s.
	1103	+* Range: 0 to 300
	1104	+)))
797	797	|(% style="width:173px" %)HMI station number|(% style="width:122px" %)HSW10070|(% colspan="2" style="width:506px" %)
798	798	|(% style="width:173px" %)PLC station number|(% style="width:122px" %)HSW10071|(% colspan="2" style="width:506px" %)
799	799	|(% colspan="1" rowspan="11" style="width:102px" %)COM1-2|(% style="width:173px" %)Communication mode|(% style="width:122px" %)HSW10094|(% colspan="2" style="width:506px" %)(((
...	...	@@ -826,10 +826,22 @@
826	826	* =1: ODD
827	827	* =2: EVEN
828	828	)))
829		-|(% style="width:173px" %)Wait timeout|(% style="width:122px" %)HSW10099|(% colspan="2" style="width:506px" %)Unit: ms. Range: 0~~30000
830		-|(% style="width:173px" %)receive timeout|(% style="width:122px" %)HSW10100|(% colspan="2" style="width:506px" %)Unit: ms. Range: 0~~30000
831		-|(% style="width:173px" %)Retry time|(% style="width:122px" %)HSW10101|(% colspan="2" style="width:506px" %)Unit: times. Range: 0~~100
832		-|(% style="width:173px" %)Retry timeout|(% style="width:122px" %)HSW10102|(% colspan="2" style="width:506px" %)Unit: s. Range: 0~~30
	1137	+|(% style="width:173px" %)Wait timeout|(% style="width:122px" %)HSW10099|(% colspan="2" style="width:506px" %)(((
	1138	+* Unit: ms.
	1139	+* Range: 0 to 30000
	1140	+)))
	1141	+|(% style="width:173px" %)receive timeout|(% style="width:122px" %)HSW10100|(% colspan="2" style="width:506px" %)(((
	1142	+* Unit: ms.
	1143	+* Range: 0 to 30000
	1144	+)))
	1145	+|(% style="width:173px" %)Retry time|(% style="width:122px" %)HSW10101|(% colspan="2" style="width:506px" %)(((
	1146	+* Unit: times.
	1147	+* Range: 0 to 100
	1148	+)))
	1149	+|(% style="width:173px" %)Retry timeout|(% style="width:122px" %)HSW10102|(% colspan="2" style="width:506px" %)(((
	1150	+* Unit: s.
	1151	+* Range: 0 to 30
	1152	+)))
833	833	|(% style="width:173px" %)HMI station number|(% style="width:122px" %)HSW10103|(% colspan="2" style="width:506px" %)
834	834	|(% style="width:173px" %)PLC station number|(% style="width:122px" %)HSW10104|(% colspan="2" style="width:506px" %)
835	835	|(% colspan="1" rowspan="11" style="width:102px" %)COM1-3|(% style="width:173px" %)Communication mode|(% style="width:122px" %)HSW10120|(% colspan="2" style="width:506px" %)(((
...	...	@@ -862,10 +862,22 @@
862	862	* =1: ODD
863	863	* =2: EVEN
864	864	)))
865		-|(% style="width:173px" %)Wait timeout|(% style="width:122px" %)HSW10125|(% colspan="2" style="width:506px" %)Unit: ms. Range: 0~~30000
866		-|(% style="width:173px" %)receive timeout|(% style="width:122px" %)HSW10126|(% colspan="2" style="width:506px" %)Unit: ms. Range: 0~~30000
867		-|(% style="width:173px" %)Retry time|(% style="width:122px" %)HSW10127|(% colspan="2" style="width:506px" %)Unit: times. Range: 0~~100
868		-|(% style="width:173px" %)Retry timeout|(% style="width:122px" %)HSW10128|(% colspan="2" style="width:506px" %)Unit: s. Range: 0~~30
	1185	+|(% style="width:173px" %)Wait timeout|(% style="width:122px" %)HSW10125|(% colspan="2" style="width:506px" %)(((
	1186	+* Unit: ms.
	1187	+* Range: 0 to 30000
	1188	+)))
	1189	+|(% style="width:173px" %)receive timeout|(% style="width:122px" %)HSW10126|(% colspan="2" style="width:506px" %)(((
	1190	+* Unit: ms.
	1191	+* Range: 0 to 30000
	1192	+)))
	1193	+|(% style="width:173px" %)Retry time|(% style="width:122px" %)HSW10127|(% colspan="2" style="width:506px" %)(((
	1194	+* Unit: times.
	1195	+* Range: 0 to 100
	1196	+)))
	1197	+|(% style="width:173px" %)Retry timeout|(% style="width:122px" %)HSW10128|(% colspan="2" style="width:506px" %)(((
	1198	+* Unit: s.
	1199	+* Range: 0 to 30
	1200	+)))
869	869	|(% style="width:173px" %)HMI station number|(% style="width:122px" %)HSW10129|(% colspan="2" style="width:506px" %)
870	870	|(% style="width:173px" %)PLC station number|(% style="width:122px" %)HSW10130|(% colspan="2" style="width:506px" %)
871	871	|(% colspan="1" rowspan="11" style="width:102px" %)COM2|(% style="width:173px" %)Communication mode|(% style="width:122px" %)HSW10072|(% colspan="2" style="width:506px" %)(((
...	...	@@ -896,10 +896,22 @@
896	896	* =1: ODD
897	897	* =2: EVEN
898	898	)))
899		-|(% style="width:173px" %)Wait timeout|(% style="width:122px" %)HSW10077|(% colspan="2" style="width:506px" %)Unit: ms. Range: 0~~30000
900		-|(% style="width:173px" %)receive timeout|(% style="width:122px" %)HSW10078|(% colspan="2" style="width:506px" %)Unit: ms. Range: 0~~30000
901		-|(% style="width:173px" %)Retry time|(% style="width:122px" %)HSW10079|(% colspan="2" style="width:506px" %)Unit: times. Range: 0~~100
902		-|(% style="width:173px" %)Retry timeout|(% style="width:122px" %)HSW10080|(% colspan="2" style="width:506px" %)Unit: s. Range: 0~~30
	1231	+|(% style="width:173px" %)Wait timeout|(% style="width:122px" %)HSW10077|(% colspan="2" style="width:506px" %)(((
	1232	+* Unit: ms.
	1233	+* Range: 0 to 30000
	1234	+)))
	1235	+|(% style="width:173px" %)receive timeout|(% style="width:122px" %)HSW10078|(% colspan="2" style="width:506px" %)(((
	1236	+* Unit: ms.
	1237	+* Range: 0 to 30000
	1238	+)))
	1239	+|(% style="width:173px" %)Retry time|(% style="width:122px" %)HSW10079|(% colspan="2" style="width:506px" %)(((
	1240	+* Unit: times.
	1241	+* Range: 0 to 100
	1242	+)))
	1243	+|(% style="width:173px" %)Retry timeout|(% style="width:122px" %)HSW10080|(% colspan="2" style="width:506px" %)(((
	1244	+* Unit: s.
	1245	+* Range: 0 to 30
	1246	+)))
903	903	|(% style="width:173px" %)HMI station number|(% style="width:122px" %)HSW10081|(% colspan="2" style="width:506px" %)
904	904	|(% style="width:173px" %)PLC station number|(% style="width:122px" %)HSW10082|(% colspan="2" style="width:506px" %)
905	905	|(% colspan="1" rowspan="11" style="width:102px" %)COM2-2|(% style="width:173px" %)Communication mode|(% style="width:122px" %)HSW10105|(% colspan="2" style="width:506px" %)(((
...	...	@@ -930,10 +930,22 @@
930	930	* =1: ODD
931	931	* =2: EVEN
932	932	)))
933		-|(% style="width:173px" %)Wait timeout|(% style="width:122px" %)HSW10110|(% colspan="2" style="width:506px" %)Unit: ms. Range: 0~~30000
934		-|(% style="width:173px" %)receive timeout|(% style="width:122px" %)HSW10111|(% colspan="2" style="width:506px" %)Unit: ms. Range: 0~~30000
935		-|(% style="width:173px" %)Retry time|(% style="width:122px" %)HSW10112|(% colspan="2" style="width:506px" %)Unit: times. Range: 0~~100
936		-|(% style="width:173px" %)Retry timeout|(% style="width:122px" %)HSW10113|(% colspan="2" style="width:506px" %)Unit: s. Range: 0~~30
	1277	+|(% style="width:173px" %)Wait timeout|(% style="width:122px" %)HSW10110|(% colspan="2" style="width:506px" %)(((
	1278	+* Unit: ms.
	1279	+* Range: 0 to 30000
	1280	+)))
	1281	+|(% style="width:173px" %)receive timeout|(% style="width:122px" %)HSW10111|(% colspan="2" style="width:506px" %)(((
	1282	+* Unit: ms.
	1283	+* Range: 0 to 30000
	1284	+)))
	1285	+|(% style="width:173px" %)Retry time|(% style="width:122px" %)HSW10112|(% colspan="2" style="width:506px" %)(((
	1286	+* Unit: times.
	1287	+* Range: 0 to 100
	1288	+)))
	1289	+|(% style="width:173px" %)Retry timeout|(% style="width:122px" %)HSW10113|(% colspan="2" style="width:506px" %)(((
	1290	+* Unit: s.
	1291	+* Range: 0 to 30
	1292	+)))
937	937	|(% style="width:173px" %)HMI station number|(% style="width:122px" %)HSW10114|(% colspan="2" style="width:506px" %)
938	938	|(% style="width:173px" %)PLC station number|(% style="width:122px" %)HSW10115|(% colspan="2" style="width:506px" %)
939	939	|(% colspan="1" rowspan="11" style="width:102px" %)COM3|(% style="width:173px" %)Communication mode|(% style="width:122px" %)HSW10083|(% colspan="2" style="width:506px" %)(((
...	...	@@ -963,29 +963,48 @@
963	963	* =1: ODD
964	964	* =2: EVEN
965	965	)))
966		-|(% style="width:173px" %)Wait timeout|(% style="width:122px" %)HSW10088|(% colspan="2" style="width:506px" %)Unit: ms. Range: 0~~30000
967		-|(% style="width:173px" %)receive timeout|(% style="width:122px" %)HSW10089|(% colspan="2" style="width:506px" %)Unit: ms. Range: 0~~30000
968		-|(% style="width:173px" %)Retry time|(% style="width:122px" %)HSW10090|(% colspan="2" style="width:506px" %)Unit: times. Range: 0~~100
969		-|(% style="width:173px" %)Retry timeout|(% style="width:122px" %)HSW10091|(% colspan="2" style="width:506px" %)Unit: s. Range: 0~~30
	1322	+|(% style="width:173px" %)Wait timeout|(% style="width:122px" %)HSW10088|(% colspan="2" style="width:506px" %)(((
	1323	+* Unit: ms.
	1324	+* Range: 0 to 30000
	1325	+)))
	1326	+|(% style="width:173px" %)receive timeout|(% style="width:122px" %)HSW10089|(% colspan="2" style="width:506px" %)(((
	1327	+* Unit: ms.
	1328	+* Range: 0 to 30000
	1329	+)))
	1330	+|(% style="width:173px" %)Retry time|(% style="width:122px" %)HSW10090|(% colspan="2" style="width:506px" %)(((
	1331	+* Unit: times.
	1332	+* Range: 0 to 100
	1333	+)))
	1334	+|(% style="width:173px" %)Retry timeout|(% style="width:122px" %)HSW10091|(% colspan="2" style="width:506px" %)(((
	1335	+* Unit: s.
	1336	+* Range: 0 to 30
	1337	+)))
970	970	|(% style="width:173px" %)HMI station number|(% style="width:122px" %)HSW10092|(% colspan="2" style="width:506px" %)
971	971	|(% style="width:173px" %)PLC station number|(% style="width:122px" %)HSW10093|(% colspan="2" style="width:506px" %)
972	972	|(% colspan="1" rowspan="2" style="width:102px" %)CAN port|(% style="width:173px" %)CAN1 baud rate|(% style="width:122px" %)HSW010116|(% style="width:299px" %)(((
973		-Unit: K, the baud rate must be an integer, for example, when the baud rate required is 250000, just enter 250.
	1341	+Unit: K, the baud rate must be an integer.
	1342	+
	1343	+For example, when the baud rate required is 250000, just enter 250.
974	974	)))|(% colspan="1" rowspan="2" style="width:218px" %)**✎Note: **If baud rate has been modified,please wait 5 seconds,then restart the HMI to take effect.
975		-|(% style="width:173px" %)CAN2 baud rate|(% style="width:122px" %)HSW010117|(% style="width:299px" %)Unit: K, the baud rate must be an integer, for example, when the baud rate required is 250000, just enter 250.
	1345	+|(% style="width:173px" %)CAN2 baud rate|(% style="width:122px" %)HSW010117|(% style="width:299px" %)(((
	1346	+Unit: K, the baud rate must be an integer.
976	976
977		-== **Ethernet communication configuration** ==
	1348	+For example, when the baud rate required is 250000, just enter 250.
	1349	+)))
978	978
	1351	+== Ethernet communication configuration ==
	1352	+
979	979	(% class="table-bordered" %)
980		-|=(% style="width: 40px;" %)**No.**|=(% style="width: 295px;" %)**Function**|=(% style="width: 220px;" %)**Address**|=(% style="width: 336px;" %)**Description**
	1354	+|(% style="width:40px" %)**No.**|(% style="width:295px" %)**Function**|(% style="width:220px" %)**Address**|(% style="width:336px" %)**Description**
981	981	|(% rowspan="7" style="width:40px" %)1|(% colspan="1" rowspan="7" style="width:295px" %)Ethernet parameter configuration for communication number 1 in list. Configure those addresses according to connected device. After configuration, wait for 5 seconds and restart the HMI.|(% style="width:220px" %)HSW11004|(% style="width:336px" %)Device IP address high word 1
982	982	|(% style="width:220px" %)HSW11005|(% style="width:336px" %)Device IP address high word 2
983	983	|(% style="width:220px" %)HSW11006|(% style="width:336px" %)Device IP address high word 3
984	984	|(% style="width:220px" %)HSW11007|(% style="width:336px" %)Device IP address high word 4
985	985	|(% style="width:220px" %)HSW11008|(% style="width:336px" %)Device Port number
986		-|(% style="width:220px" %)HSW11009|=(% style="width: 336px;" %)(((
987		-* =2 TCP
988		-* =3 UDP
	1360	+|(% style="width:220px" %)HSW11009|(% style="width:336px" %)(((
	1361	+~=2 TCP
	1362	+
	1363	+~=3 UDP
989	989	)))
990	990	|(% style="width:220px" %)HSW11010|(% style="width:336px" %)Reserved
991	991	|(% rowspan="7" style="width:40px" %)2|(% colspan="1" rowspan="7" style="width:295px" %)Ethernet parameter configuration for communication number 2 in list. Configure those addresses according to connected device. After configuration, wait for 5 seconds and restart the HMI.|(% style="width:220px" %)HSW11011|(% style="width:336px" %)Device IP address high word 1
...	...	@@ -993,9 +993,10 @@
993	993	|(% style="width:220px" %)HSW11013|(% style="width:336px" %)Device IP address high word 3
994	994	|(% style="width:220px" %)HSW11014|(% style="width:336px" %)Device IP address high word 4
995	995	|(% style="width:220px" %)HSW11015|(% style="width:336px" %)Device Port number
996		-|(% style="width:220px" %)HSW11016|=(% style="width: 336px;" %)(((
997		-* =2 TCP
998		-* =3 UDP
	1371	+|(% style="width:220px" %)HSW11016|(% style="width:336px" %)(((
	1372	+~=2 TCP
	1373	+
	1374	+~=3 UDP
999	999	)))
1000	1000	|(% style="width:220px" %)HSW11017|(% style="width:336px" %)Reserved
1001	1001	|(% style="width:40px" %)…|(% style="width:295px" %) |(% style="width:220px" %)…|(% style="width:336px" %)…
...	...	@@ -1004,7 +1004,11 @@
1004	1004	|(% style="width:220px" %)HSW11223|(% style="width:336px" %)Device IP address high word 3
1005	1005	|(% style="width:220px" %)HSW11224|(% style="width:336px" %)Device IP address high word 4
1006	1006	|(% style="width:220px" %)HSW11225|(% style="width:336px" %)Device Port number
1007		-|(% style="width:220px" %)HSW11226|=(% style="width: 336px;" %)2 TCP; =3 UDP
	1383	+|(% style="width:220px" %)HSW11226|(% style="width:336px" %)(((
	1384	+~=2 TCP;
	1385	+
	1386	+~=3 UDP
	1387	+)))
1008	1008	|(% style="width:220px" %)HSW11227|(% style="width:336px" %)Reserved
1009	1009
1010	1010	(% class="box infomessage" %)
...	...	@@ -1012,7 +1012,7 @@
1012	1012	**✎Note:** The number of Ethernet connections supported by different HMI series varies.
1013	1013	)))
1014	1014
1015		-== **Communication control** ==
	1395	+== Communication control ==
1016	1016
1017	1017	(% class="table-bordered" %)
1018	1018	|=(% style="width: 135px;" %)**Communication No.**|=(% style="width: 102px;" %)**Station No.**|=(% style="width: 185px;" %)**Control bit**|=(% style="width: 191px;" %)**Communication lamp**|=(% style="width: 271px;" %)**Description**

6.png

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.Mora

Size

...	...	@@ -1,0 +1,1 @@
	1	+20.1 KB

Content