Changes for page 13 HMI Internal Registers

Summary

• Page properties (3 modified, 0 added, 0 removed)
• Attachments (0 modified, 1 added, 0 removed)
  • 6.png

Details

Page properties

Title

...	...	@@ -1,1 +1,1 @@
1		-12 HMI internal registers
	1	+14 HMI Internal Registers

Author

...	...	@@ -1,1 +1,1 @@
1		-XWiki.Stone
	1	+XWiki.Hunter

Content

...	...	@@ -4,11 +4,11 @@
4	4
5	5	*HSW, HDW, HUW, HAW are word address, HSX, HDX, HUX, HAX are bit address.
6	6
7		-1. **System data area (HSW): **A special register defined by the system.
8		-1. **Data storage area (HDW/HDX): **Users store user data.
9		-1. **System data area (HUW): **A special register defined by the system.
10		-1. **System Data (HAW)**: System register used for power-off save.
11		-1. **Recipe index area (RPW): **System register used for recipe index.
	7	+* **System data area (HSW): **A special register defined by the system.
	8	+* **Data storage area (HDW/HDX): **Users store user data.
	9	+* **System data area (HUW): **A special register defined by the system.
	10	+* **System Data (HAW)**: System register used for power-off save.
	11	+* **Recipe index area (RPW): **System register used for recipe index.
12	12
13	13	HMI internal registers are divided into bit address and word address, which can be accessed in two ways (take HDW as an example).
14	14
...	...	@@ -25,6 +25,11 @@
25	25	* The address of the bit address HDX is with a decimal point while word addresses are integers.
26	26	)))
27	27
	28	+= Address ranges table =
	29	+
	30	+(% style="text-align:center" %)
	31	+[[image:6.png]]
	32	+
28	28	= **Data storage area (HDW/HDX)** =
29	29
30	30	It is used to save the temporary data of project.
...	...	@@ -51,21 +51,27 @@
51	51
52	52	It is system recipe data power-off save register. The range is from RPW000000 to RPW990450.
53	53
	59	+(% class="box infomessage" %)
	60	+(((
54	54	**✎Note:**
55	55
56	56	* RPW is power-down retention. The register of this type is able to save the data before the power-down.
57	57	* To avoid possible device failure, do not immediately power off and reboot when configuring the power-down save addre
	65	+)))
58	58
59	59	= **Single user data area (HUW/HUX)** =
60	60
61	61	It is used for system special registers (reserved by system).
62	62
63		-1. Access as word, and serial number range is from HUW0 to HUW199999.
64		-1. Access as bit, and serial number range is from HUX0.0 to HUX199999.15.
	71	+1. Access as word, and serial number range is from HUW0 to HUW1599.
	72	+1. Access as bit, and serial number range is from HUX0.0 to HUX1599.15.
65	65
	74	+(% class="box infomessage" %)
	75	+(((
66	66	**✎Note:**
67	67
68	68	* HUW/HUX is a system special register, so please check the system special register list during use. Please use the address specified in the table and do not use the address which is not mentioned in the table.
	79	+)))
69	69
70	70	(% class="table-bordered" %)
71	71	|=**Special register address**|=**Description**|=**Function**
...	...	@@ -127,16 +127,19 @@
127	127	1. Access as word, and serial number range is from HSW0 to HSW49999. (HSW10000 to HSW19999 are the power-off storage areas)
128	128	1. Access as bit, and serial number range is from HSX0.0 to HSX49999.15.
129	129
	141	+(% class="box infomessage" %)
	142	+(((
130	130	**✎Note:**
131	131
132	132	* HSW / HSX are a system special register, so please check the system special register list during use. Please use the address specified in the table and do not use the address which is not mentioned in the table.
133	133	* To avoid possible device failure, do not immediately power off and reboot when configuring the power-down save address.
	147	+)))
134	134
135	135	(% class="table-bordered" style="width:1024px" %)
136	136	|=(% scope="row" style="width: 160px;" %)**Address**|=(% style="width: 282px;" %)**Function**|=(% style="width: 452px;" %)**Description**
137	137	|=(% style="width: 160px;" %)HSW0|(% style="width:282px" %)Language switch|(% style="width:452px" %)Multiple language could be set in the project, HMI support maximum 8 languages. (Power-down save supported)
138		-|=(% style="width: 160px;" %)HSW1|(% style="width:282px" %)Beep frequency|(% style="width:452px" %)Frequency range: 0~~4000
139		-|=(% style="width: 160px;" %)HSW2|(% style="width:282px" %)Beep volume|(% style="width:452px" %)Volume range: 0~~80
	152	+|=(% style="width: 160px;" %)HSW1|(% style="width:282px" %)Beep frequency (Only valid in HMI V1.0 System)|(% style="width:452px" %)Frequency range: 0~~4000
	153	+|=(% style="width: 160px;" %)HSW2|(% style="width:282px" %)Beep volume (Only valid in HMI V1.0 System)|(% style="width:452px" %)Volume range: 0~~80
140	140	|=(% style="width: 160px;" %)HSW3|(% style="width:282px" %)Beep time|(% style="width:452px" %)Unit: ms
141	141	|=(% style="width: 160px;" %)HSW4|(% style="width:282px" %)Beep whether enable or not|(% style="width:452px" %)(((
142	142	* =0: Enable.
...	...	@@ -150,7 +150,7 @@
150	150	)))
151	151	|=(% style="width: 160px;" %)HSW6~~HSW7|(% style="width:282px" %)Number of alarms|(% style="width:452px" %)The number of alarm (it also includes the records of alarm confirmed)
152	152	|=(% style="width: 160px;" %)HSW8|(% style="width:282px" %)Number of unconfirmed history alarm|(% style="width:452px" %)The number of unconfirmed history alarm
153		-|=(% style="width: 160px;" %)HSW9|(% style="width:282px" %)Time out tip|(% style="width:452px" %)(((
	167	+|=(% style="width: 160px;" %)HSW9|(% style="width:282px" %)Time out prompt|(% style="width:452px" %)(((
154	154	* =0: Enable
155	155	* =1: Disable
156	156	)))
...	...	@@ -175,12 +175,16 @@
175	175	* =5: Friday.
176	176	* =6: Saturday.
177	177	)))
	192	+|=(% style="width: 160px;" %)HSW39|(% style="width:282px" %)Beep type(Only valid in HMI V2.0 System)|(% style="width:452px" %)Type range: 1-5, Default is 1.
178	178	|=(% style="width: 160px;" %)HSW134|(% style="width:282px" %)(((
179	179	Whether the Script is read through
180	180
181	181
182	182	)))|(% style="width:452px" %)(((
	198	+(% class="box infomessage" %)
	199	+(((
183	183	**✎Note:** If want to read-only or write-only, please enable this settings.
	201	+)))
184	184
185	185	* =0: Read from HMI cache(Default)
186	186	* =1: Read from PLC directly
...	...	@@ -241,8 +241,8 @@
241	241	* =2: HSX521.1=1, delete all trend graph.
242	242	* =4: HSX521.2=1, delete all alarms.
243	243	* =16: HSX521.4=1, delete history XY plot.
244		-* =32: HSX521.5=1, delete data records in SD card or flash dish;(Please make a setting which is saved to flash disk or SD card in project setting).
245		-* =64: HSX521.6=1, delete alarms records in SD card or flash dish; (Please make a setting which is saved to flash disk or SD card in project setting).
	262	+* =32: HSX521.5=1, delete data records in SD card or USB flash disk;(Please make a setting which is saved to USB flash disk or SD card in project setting).
	263	+* =64: HSX521.6=1, delete alarms records in SD card or USB flash disk; (Please make a setting which is saved to USB flash disk or SD card in project setting).
246	246	)))
247	247	|=(% style="width: 160px;" %)HSW522|(% style="width:282px" %)Copy and paste the alarm/data files in flash to the USB flash disk|(% style="width:452px" %)(((
248	248	* =0: No operation
...	...	@@ -291,7 +291,7 @@
291	291	* =2: Ejecting SD card, please waiting…
292	292	* =3: SD card ejected
293	293	)))
294		-|=(% style="width: 160px;" %)HSW550~~849|(% style="width:282px" %)Communication control|(% style="width:452px" %)For communication control and communication lamp (please refer to "[[communication control>>http://13.229.109.52:8080/wiki/pistudio/view/Helps/13.HMI%20internal%20registers/#HCommunicationcontrol]]" sector for detailed)
	312	+|=(% style="width: 160px;" %)HSW550~~849|(% style="width:282px" %)Communication control|(% style="width:452px" %)For communication control and communication lamp (please refer to "[[Communication control>>http://13.229.109.52:8080/wiki/pistudio/view/Helps/13.HMI%20internal%20registers/#HCommunicationcontrol]]" sector for detailed)
295	295	|=(% style="width: 160px;" %)HSW850|(% style="width:282px" %)(((
296	296	Network state
297	297
...	...	@@ -340,15 +340,15 @@
340	340	* HDX882.1=1 SD card is reading data, don't remove SD card.
341	341	)))
342	342	|=(% style="width: 160px;" %)HSW884|(% style="width:282px" %)Enter the system network configuration interface|(% style="width:452px" %)(((
343		-* =0: Do not enter the network configuration interface
344		-* =1: Enter the system network configuration interface.
	361	+* = 0: Do not enter the network configuration interface
	362	+* = 1: Enter the system network configuration interface.
345	345	** ig series HMI only supports to enter the system interface
346	346
347	347	)))
348	348	|=(% style="width: 160px;" %)HSW885|(% style="width:282px" %)When the control object hides the address is read failed (communication failure), set the display mode of the object|(% style="width:452px" %)(((
349	349	* = 0: displayed by object setting.
350		-* =1: control address read failure, the address control of all objects is hidden, not displayed.
351		-* =2: control address read failure, the address control of all objects is displayed, not hidden.
	368	+* = 1: control address read failure, the address control of all objects is hidden, not displayed.
	369	+* = 2: control address read failure, the address control of all objects is displayed, not hidden.
352	352	)))
353	353	|=(% style="width: 160px;" %)HSW893|(% style="width:282px" %)(((
354	354	User Permission Control Address, same as HUW1000 feature, please refer to chapter "[[User Permission>>http://13.229.109.52:8080/wiki/pistudio/view/Helps/08.Basic%20Function/#HUserPermission]]"
...	...	@@ -371,7 +371,7 @@
371	371	|=(% style="width: 160px;" %)HSW900|(% style="width:282px" %)Quick update frequency settings for objects|(% style="width:452px" %)(((
372	372	Valid when the object is enabled for "quick update". Default: 5.
373	373
374		-Range: 1 (fastest) ~~ 50 (slowest)
	392	+Range: 1 (fastest) - 50 (slowest)
375	375	)))
376	376	|=(% style="width: 160px;" %)HSW920|(% style="width:282px" %)Static mode Maximum periods|(% style="width:452px" %)Numeric Input/ Display (range: 0-12)
377	377	|=(% style="width: 160px;" %)HSW921 ~~ 924|(% style="width:282px" %)Static mode Admin key|(% style="width:452px" %)Character Input/ Display (length: 8)
...	...	@@ -421,8 +421,11 @@
421	421	|=(% style="width: 160px;" %)HSW1070|(% style="width:282px" %)The time interval (seconds) since the last time the screen was clicked|(% style="width:452px" %)(((
422	422	Shows how long the current screen has not been clicked, using a decimal unsigned double word (Numeric Input/ Display).
423	423
	442	+(% class="box infomessage" %)
	443	+(((
424	424	**✎Note: **This register is cleared to zero regardless of which user clicks on the screen.
425	425	)))
	446	+)))
426	426	|=(% style="width: 160px;" %)HSW1073|(% style="width:282px" %)Corresponding key value from keyboard|(% style="width:452px" %)Display the key value of the currently pressed key, the key value is shown in Table 1 (not updated when the character input display is being input)
427	427	|=(% style="width: 160px;" %)HSW1074|(% style="width:282px" %)Keyboard key status|(% style="width:452px" %)Display the current button status (not updated when the numeric input display is being input)(((
428	428	* =0: key release
...	...	@@ -450,7 +450,7 @@
450	450	Address mapping polling cycle, effective range: 40~~1000ms, default: 300ms.
451	451
452	452	* When the set value is greater than 1000, the value is 1000.
453		-* When the set value is greater than 1000, it changes to the default value 300
	474	+* When the set value is lower than 40, it changes to the default value 300
454	454	)))
455	455	|=(% style="width: 160px;" %)HSW1087|(% style="width:282px" %)Control write interval in address mapping|(% style="width:452px" %)(((
456	456	After reading data to the device for N times, Perform an address mapping write operation. N is the interval value. The effective range: 0~~5, and default is 2.
...	...	@@ -485,6 +485,8 @@
485	485	* =0, Default value
486	486	* =1, Release the alarm generated before the last power-down when starting up
487	487	)))
	509	+|=(% style="width: 160px;" %)HSW1200|(% colspan="1" rowspan="2" style="width:282px" %)TSAP settings for HMI in the Siemens LOGO! 8 protocol(ig series or HMI V2.0)|(% style="width:452px" %)HMI local TSAP, which corresponds to the remote TSAP of PLC
	510	+|=(% style="width: 160px;" %)HSW1201|(% style="width:452px" %)HMI remote TSAP, which corresponds to the local TSAP of PLC
488	488	|=(% style="width: 160px;" %)HSW1450|(% style="width:282px" %)Enable objects level password function|(% style="width:452px" %)(((
489	489	* =0, Disable
490	490	* =1, Enable
...	...	@@ -591,6 +591,9 @@
591	591	* =0: Server connection exception
592	592	* =1: Server connection is OK
593	593	)))
	617	+|=(% style="width: 160px;" %)HSW1740|(% style="width:282px" %)Wi-fi signal strength|(% style="width:452px" %)(((
	618	+Display the value of Wi-fi signal signal strength, ranges from 0~~100 (Signal strength is automatically obtained only once when HMI is powered on, and it will not be automatically updated. It needs to be used with the HSW1890)
	619	+)))
594	594	|=(% style="width: 160px;" %)HSW1741|(% colspan="1" rowspan="12" style="width:282px" %)Related IP register in 4Gnetwork status (It is valid when HMI is connected to 4G)|(% style="width:452px" %)Local IP address high byte 1
595	595	|=(% style="width: 160px;" %)HSW1742|(% style="width:452px" %)Local IP address high byte 2
596	596	|=(% style="width: 160px;" %)HSW1743|(% style="width:452px" %)Local IP address high byte 3
...	...	@@ -618,10 +618,180 @@
618	618	* =1: Server connection is OK
619	619	)))
620	620	|=(% style="width: 160px;" %)HSW1761|(% style="width:282px" %)Display 4G network signal strength|(% style="width:452px" %)Signal strength: 0~~31. The greater the value ,the signal is stronger
	647	+|=(% style="width: 160px;" %)(((
	648	+HSW1762
	649	+)))|(% colspan="1" rowspan="13" style="width:282px" %)(((
	650	+Note: Valid when Ethernet2 of HMI is plugged into the network cable.
	651	+①、When the Ethernet setting is enabled in the project parameters, this register displays the set value.
	652	+②. When the Ethernet setting is not enabled in the engineering parameters, the register displays the Ethernet IP automatically acquired by the HMI.
	653	+③. When the HMI is not plugged into the network cable, the register will show 0 whether the engineering parameters are set or not.
	654	+④.IP related registers can be read and written (only static IP mode can be written).
	655	+)))|(% style="width:452px" %)(((
	656	+Ethernet2 Local IP address high byte 1
	657	+)))
	658	+|=(% style="width: 160px;" %)(((
	659	+HSW1763
	660	+)))|(% style="width:452px" %)(((
	661	+Ethernet2 Local IP address high byte 2
	662	+)))
	663	+|=(% style="width: 160px;" %)(((
	664	+HSW1764
	665	+)))|(% style="width:452px" %)(((
	666	+Ethernet2 Local IP address high byte 3
	667	+)))
	668	+|=(% style="width: 160px;" %)(((
	669	+HSW1765
	670	+)))|(% style="width:452px" %)(((
	671	+Ethernet2 Local IP address high byte 4
	672	+)))
	673	+|=(% style="width: 160px;" %)(((
	674	+HSW1766
	675	+)))|(% style="width:452px" %)(((
	676	+Ethernet2 Local mask IP address high byte 1
	677	+)))
	678	+|=(% style="width: 160px;" %)(((
	679	+HSW1767
	680	+)))|(% style="width:452px" %)(((
	681	+Ethernet2 Local mask IP address high byte 2
	682	+)))
	683	+|=(% style="width: 160px;" %)(((
	684	+HSW1768
	685	+)))|(% style="width:452px" %)Ethernet2 Local mask IP address high byte 3
	686	+|=(% style="width: 160px;" %)HSW1769|(% style="width:452px" %)Ethernet2 Local mask IP address high byte 4
	687	+|=(% style="width: 160px;" %)(((
	688	+HSW1770
	689	+)))|(% style="width:452px" %)(((
	690	+Ethernet2 Local gateway IP address high byte 1
	691	+)))
	692	+|=(% style="width: 160px;" %)(((
	693	+HSW1771
	694	+)))|(% style="width:452px" %)(((
	695	+Ethernet2 Local gateway IP address high byte 2
	696	+)))
	697	+|=(% style="width: 160px;" %)(((
	698	+HSW1772
	699	+)))|(% style="width:452px" %)(((
	700	+Ethernet2 Local gateway IP address high byte 3
	701	+)))
	702	+|=(% style="width: 160px;" %)(((
	703	+HSW1773
	704	+)))|(% style="width:452px" %)(((
	705	+Ethernet2 Local gateway IP address high byte 4
	706	+)))
	707	+|=(% style="width: 160px;" %)(((
	708	+HSW1774
	709	+)))|(% style="width:452px" %)(((
	710	+Ethernet2 Local Port Address
	711	+)))
	712	+|=(% style="width: 160px;" %)(((
	713	+HSW1775
	714	+)))|(% colspan="1" rowspan="6" style="width:282px" %)(((
	715	+①Display the MAC code of Ethernet2 NIC
	716	+
	717	+(hexadecimal display)
	718	+
	719	+②Read-only mode, not modifiable
	720	+)))|(% style="width:452px" %)(((
	721	+Ethernet2 Local MAC code high byte 1
	722	+)))
	723	+|=(% style="width: 160px;" %)(((
	724	+HSW1776
	725	+)))|(% style="width:452px" %)(((
	726	+Ethernet2 Local MAC code high byte 2
	727	+)))
	728	+|=(% style="width: 160px;" %)(((
	729	+HSW1777
	730	+)))|(% style="width:452px" %)(((
	731	+Ethernet2 Local MAC code high byte 3
	732	+)))
	733	+|=(% style="width: 160px;" %)(((
	734	+HSW1778
	735	+)))|(% style="width:452px" %)(((
	736	+Ethernet2 Local MAC code high byte 4
	737	+)))
	738	+|=(% style="width: 160px;" %)(((
	739	+HSW1779
	740	+)))|(% style="width:452px" %)(((
	741	+Ethernet2 Local MAC code high byte 5
	742	+)))
	743	+|=(% style="width: 160px;" %)(((
	744	+HSW1780
	745	+)))|(% style="width:452px" %)(((
	746	+Ethernet2 Local MAC code high byte 6
	747	+)))
	748	+|=(% style="width: 160px;" %)(((
	749	+HSW1781
	750	+)))|(% colspan="1" rowspan="8" style="width:282px" %)(((
	751	+①Display and modify DNS1 and DNS2 of Ethernet2
	752	+
	753	+②Related registers can be read and written mode (only static IP mode can be written)
	754	+)))|(% style="width:452px" %)(((
	755	+Ethernet2 Local DNS1 address high byte 1
	756	+)))
	757	+|=(% style="width: 160px;" %)(((
	758	+HSW1782
	759	+)))|(% style="width:452px" %)(((
	760	+Ethernet2 Local DNS1 address high byte 2
	761	+)))
	762	+|=(% style="width: 160px;" %)(((
	763	+HSW1783
	764	+)))|(% style="width:452px" %)(((
	765	+Ethernet2 Local DNS1 address high byte 3
	766	+)))
	767	+|=(% style="width: 160px;" %)(((
	768	+HSW1784
	769	+)))|(% style="width:452px" %)(((
	770	+Ethernet2 Local DNS1 address high byte 4
	771	+)))
	772	+|=(% style="width: 160px;" %)(((
	773	+HSW1785
	774	+)))|(% style="width:452px" %)(((
	775	+Ethernet2 Local DNS2 address high byte 1
	776	+)))
	777	+|=(% style="width: 160px;" %)(((
	778	+HSW1786
	779	+)))|(% style="width:452px" %)(((
	780	+Ethernet2 Local DNS2 address high byte 2
	781	+)))
	782	+|=(% style="width: 160px;" %)(((
	783	+HSW1787
	784	+)))|(% style="width:452px" %)(((
	785	+Ethernet2 Local DNS2 address high byte 3
	786	+)))
	787	+|=(% style="width: 160px;" %)(((
	788	+HSW1788
	789	+)))|(% style="width:452px" %)(((
	790	+Ethernet2 Local DNS2 address high byte 4
	791	+)))
	792	+|=(% style="width: 160px;" %)(((
	793	+HSW1789
	794	+)))|(% colspan="1" style="width:282px" %)(((
	795	+Display or set the dynamic or static IP mode of Ethernet2
	796	+)))|(% style="width:452px" %)(((
	797	+HSX1789.0 = 0, Static IP mode
	798	+
	799	+HSX1789.0 = 1, dynamic IP mode
	800	+)))
	801	+|=(% style="width: 160px;" %)(((
	802	+HSW1790
	803	+)))|(% colspan="1" style="width:282px" %)(((
	804	+Confirm Ethernet2 IP, subnet mask, gateway, DNS1, DNS2, and dynamic static IP settings
	805	+)))|(% style="width:452px" %)(((
	806	+~= 1, confirm the setting (i.e., after modifying IP-related information, set this address to 1, representing confirmation of the modification, after which it will be reset to 0)
	807	+)))
	808	+|=(% style="width: 160px;" %)(((
	809	+HSW1791
	810	+)))|(% colspan="1" style="width:282px" %)(((
	811	+Network status of the Ethernet2 connection server
	812	+)))|(% style="width:452px" %)(((
	813	+~= 0, connection to the server is abnormal = 1, connection to the server is normal
	814	+)))
621	621	|=(% style="width: 160px;" %)HSW1852|(% style="width:282px" %)Control the interval in two consecutive clicks|(% style="width:452px" %)Limit range: 1~~500ms. The default is 100 ms.
622	622	|=(% style="width: 160px;" %)HSW1853|(% style="width:282px" %)File format for exporting data records to USB flash drive or SD card|(% style="width:452px" %)(((
623	623	* =0: db database
624	624	* =1: CSV
	819	+
	820	+(Only valid for script function DbToCsvFile)
625	625	)))
626	626	|=(% style="width: 160px;" %)HSW1854|(% style="width:282px" %)High and low word conversion type|(% style="width:452px" %)(((
627	627	* =0: use the old high-low word conversion (default)
...	...	@@ -643,17 +643,96 @@
643	643	* =1: download firmware
644	644	* =2: enter the background
645	645	)))
646		-|=(% style="width: 160px;" %)HSW1866|(% style="width:282px" %) |(% style="width:452px" %)
647		-|=(% style="width: 160px;" %)HSW1867|(% style="width:282px" %) |(% style="width:452px" %)Monitor address is set during reset of reset switch, whether to cancel reset, default = 0, yes; = 1, no
648		-|=(% style="width: 160px;" %)HSW1868|(% style="width:282px" %) |(% style="width:452px" %)Controls whether the button pops up when double-clicking or long-clicking on a record-like form widget, default = 0, yes; = 1, no
	842	+|=(% style="width: 160px;" %)HSW1865|(% style="width:282px" %)Priority connection to the cloud|(% style="width:452px" %)(((
	843	+* =0: priority Ethernet
	844	+* =1: priority WLAN
	845	+* =2: priority 4G
	846	+)))
	847	+|=(% style="width: 160px;" %)HSW1866|(% style="width:282px" %)Delete the Lua extension module file|(% style="width:452px" %)(((
	848	+* =0: delete;
	849	+* = Others: do not delete
	850	+)))
	851	+|=(% style="width: 160px;" %)HSW1867|(% style="width:282px" %)Reset mode|(% style="width:452px" %)(((
	852	+Monitor address is set during reset of reset switch, whether to cancel reset,
	853	+
	854	+* = 0: yes (default);
	855	+* = 1: no
	856	+)))
	857	+|=(% style="width: 160px;" %)HSW1868|(% style="width:282px" %)Double-click or long press the record type table mode|(% style="width:452px" %)(((
	858	+Controls whether the button pops up when double-clicking or long pressing on record type table object
	859	+
	860	+* = 0: yes (default);
	861	+* = 1: no
	862	+)))
	863	+|=(% style="width: 160px;" %)(((
	864	+HSW1869
	865	+)))|(% style="width:282px" %)(((
	866	+Dynamic screensaver countdown
	867	+)))|(% style="width:452px" %)(((
	868	+Countdown to enter dynamic screensaver effect, unit (S)
	869	+)))
	870	+|=(% style="width: 160px;" %)(((
	871	+HSW1870
	872	+)))|(% style="width:282px" %)(((
	873	+Display or set the dynamic or static IP mode of Ethernet1
	874	+)))|(% style="width:452px" %)(((
	875	+HSX1870.0 = 0, Static IP mode
	876	+
	877	+HSX1870.0 = 1, dynamic IP mode
	878	+)))
	879	+|=(% style="width: 160px;" %)(((
	880	+HSW1871
	881	+)))|(% style="width:282px" %)(((
	882	+Confirm the IP, subnet mask, gateway, DNS1, DNS2, and dynamic static IP settings for Ethernet1
	883	+)))|(% style="width:452px" %)(((
	884	+~= 1, confirm the setting (i.e., after modifying IP-related information, set this address to 1, representing confirmation of the modification, after which it will be reset to 0)
	885	+)))
	886	+|=(% style="width: 160px;" %)(((
	887	+HSW1872
	888	+)))|(% colspan="1" rowspan="8" style="width:282px" %)(((
	889	+①Display and modify DNS1 and DNS2 of Ethernet1
	890	+
	891	+②Related registers can be read and written mode (only static IP mode can be written)
	892	+)))|(% style="width:452px" %)(((
	893	+Ethernet1 Local DNS1 address high byte 1
	894	+)))
	895	+|=(% style="width: 160px;" %)(((
	896	+HSW1873
	897	+)))|(% style="width:452px" %)Ethernet1 Local DNS1 address high byte 2
	898	+|=(% style="width: 160px;" %)(((
	899	+HSW1874
	900	+)))|(% style="width:452px" %)Ethernet1 Local DNS1 address high byte 3
	901	+|=(% style="width: 160px;" %)(((
	902	+HSW1875
	903	+)))|(% style="width:452px" %)Ethernet1 Local DNS1 address high byte 4
	904	+|=(% style="width: 160px;" %)(((
	905	+HSW1876
	906	+)))|(% style="width:452px" %)Ethernet1 Local DNS2 address high byte 1
	907	+|=(% style="width: 160px;" %)(((
	908	+HSW1877
	909	+)))|(% style="width:452px" %)Ethernet1 Local DNS2 address high byte 2
	910	+|=(% style="width: 160px;" %)(((
	911	+HSW1878
	912	+)))|(% style="width:452px" %)Ethernet1 Local DNS2 address high byte 3
	913	+|=(% style="width: 160px;" %)(((
	914	+HSW1879
	915	+)))|(% style="width:452px" %)Ethernet1 Local DNS2 address high byte 4
	916	+|=(% style="width: 160px;" %)HSW1890|(% colspan="1" style="width:282px" %)Enable refresh current network signal|(% style="width:452px" %)(((
	917	+* =1: Refresh the network signal once after triggered (This register will be automatically reset after triggered, only update the signal value once after per 15 seconds, not able to update twice in the short interval)
	918	+* =Others: not refresh
	919	+)))
	920	+|=(% style="width: 160px;" %)HSW1891|(% colspan="1" style="width:282px" %)Enable clear cache for screen data  |(% style="width:452px" %)(((
	921	+* =1, not clear screen cache when switch language
	922	+* =2, trigger clear cache of all screens for once time
	923	+* =3, always clear cache of all screen data
	924	+)))
649	649	|=(% style="width: 160px;" %)HSW10000~~19999|(% style="width:282px" %)Power-down storage area|(% style="width:452px" %)After restart, the data remains
650	650	|=(% style="width: 160px;" %)HSW10035|(% rowspan="13" style="width:282px" %)(((
651		-**✎Note: **Only valid when the HMI is plugged into the Ethernet cable.
652		-
653		-1. If Ethernet settings is enabled in project parameters, this register displays the set value.
654		-1. If Ethernet settings is not enabled in project parameters, IP would automatically obtained IP.
655		-1. If HMI is not connected to the network, the register is displayed as 0 whether the engineering parameters are set.
656		-1. 4. All IP registers of HMI are read-only.
	927	+Note: Valid when Ethernet1 of HMI is plugged into the network cable.
	928	+① When the Ethernet setting is enabled in the project parameters, this register displays the set value.
	929	+② When the Ethernet setting is not enabled in the engineering parameters, the register displays the Ethernet IP automatically acquired by the HMI.
	930	+③ When the HMI is not plugged into the network cable, the register will show 0 whether the engineering parameters are set or not.
	931	+④ IP related registers can be read and written (only static IP mode can be written).
657	657	)))|(% style="width:452px" %)Local IP address high byte 1
658	658	|=(% style="width: 160px;" %)HSW10036|(% style="width:452px" %)Local IP address high byte 2
659	659	|=(% style="width: 160px;" %)HSW10037|(% style="width:452px" %)Local IP address high byte 3
...	...	@@ -668,9 +668,11 @@
668	668	|=(% style="width: 160px;" %)HSW10046|(% style="width:452px" %)Local gateway address high byte 4
669	669	|=(% style="width: 160px;" %)HSW10047|(% style="width:452px" %)Local port address
670	670	|=(% style="width: 160px;" %)HSW10048|(% rowspan="6" style="width:282px" %)(((
671		-Displays the MAC code of the current network card
	946	+①Display the MAC code of Ethernet1 NIC
672	672
673		-(Hexadecimal display)
	948	+(hexadecimal display)
	949	+
	950	+②Read-only mode, not modifiable
674	674	)))|(% style="width:452px" %)Local MAC code high word 1
675	675	|=(% style="width: 160px;" %)HSW10049|(% style="width:452px" %)Local MAC code high word 2
676	676	|=(% style="width: 160px;" %)HSW10050|(% style="width:452px" %)Local MAC code high word 3
...	...	@@ -677,7 +677,7 @@
677	677	|=(% style="width: 160px;" %)HSW10051|(% style="width:452px" %)Local MAC code high word 4
678	678	|=(% style="width: 160px;" %)HSW10052|(% style="width:452px" %)Local MAC code high word 5
679	679	|=(% style="width: 160px;" %)HSW10053|(% style="width:452px" %)Local MAC code high word 6
680		-|=(% style="width: 160px;" %)HSW10118|(% colspan="1" rowspan="2" style="width:282px" %)TSAP settings for HMI in the Siemens logo! 8 protocol|(% style="width:452px" %)HMI local TSAP, which corresponds to the remote TSAP of PLC
	957	+|=(% style="width: 160px;" %)HSW10118|(% colspan="1" rowspan="2" style="width:282px" %)TSAP settings for HMI in the Siemens LOGO! 8 protocol|(% style="width:452px" %)HMI local TSAP, which corresponds to the remote TSAP of PLC
681	681	|=(% style="width: 160px;" %)HSW10119|(% style="width:452px" %)HMI remote TSAP, which corresponds to the local TSAP of PLC
682	682	|=(% style="width: 160px;" %)HSW10461~~10493|(% style="width:282px" %)Remote access password|(% style="width:452px" %)8-character remote access password
683	683	|=(% style="width: 160px;" %)HSW10494~~10558|(% style="width:282px" %)Machine ID (Read only)|(% style="width:452px" %)Machine ID for remote access (read only 64-bit)
...	...	@@ -716,7 +716,7 @@
716	716	|=(% style="width: 160px;" %)HSW10606|(% style="width:282px" %)Printer instruction type|(% style="width:452px" %)(((
717	717	* =1: Graphic print type
718	718	* =2: Dot density printing type
719		-* =3: special for EPSON printer
	996	+* =3(Default value): special for EPSON printer
720	720	)))
721	721	|=(% style="width: 160px;" %)HSW10607|(% style="width:282px" %)Printer paper cutting function|(% style="width:452px" %)(((
722	722	* =1: Enable
...	...	@@ -745,6 +745,7 @@
745	745	* =0: LAN or the external network both OK
746	746	* =1: Only LAN access
747	747	* =2: Only external network can access
	1025	+* =3: Close the functions
748	748	)))
749	749	|=(% style="width: 160px;" %)HSW11757|(% style="width:282px" %)Enable the valid date of the dynamic installment password|(% style="width:452px" %)(((
750	750	* =0: Disabled
...	...	@@ -759,11 +759,38 @@
759	759	)))
760	760	|=(% style="width: 160px;" %)HSW11760|(% style="width:282px" %)Screensaver countdown|(% style="width:452px" %)Display the countdown to enter the Screensaver, unit: second.
761	761	|=(% style="width: 160px;" %)HSW11761|(% style="width:282px" %)Screensaver screen number|(% style="width:452px" %)Set the screen number for Screensaver
	1040	+|=(% style="width: 160px;" %)(((
	1041	+HSW11762
	1042	+)))|(% style="width:282px" %)(((
	1043	+Dynamic screensaver control address
	1044	+)))|(% style="width:452px" %)(((
	1045	+HSX11762.0=0, initialize with project configuration;
762	762
763		-== **Serial port communication configuration** ==
	1047	+HSX11762.0=1, initialize with special register configuration;
764	764
	1049	+HSX11762.1=0, disable dynamic screensaver;
	1050	+
	1051	+HSX11762.1=1, enable dynamic screensaver
	1052	+)))
	1053	+|=(% style="width: 160px;" %)(((
	1054	+HSW11763
	1055	+)))|(% style="width:282px" %)(((
	1056	+Waiting time to enter the dynamic screensaver
	1057	+)))|(% style="width:452px" %)(((
	1058	+Waiting time when the screen is not operated, range 1~~720 minutes
	1059	+)))
	1060	+|=(% style="width: 160px;" %)(((
	1061	+HSW11764
	1062	+)))|(% style="width:282px" %)(((
	1063	+Animated screensaver animation type
	1064	+)))|(% style="width:452px" %)(((
	1065	+~=0: Raster,=1: Blinds,=2: Bubble
	1066	+)))
	1067	+
	1068	+== Serial port communication configuration ==
	1069	+
765	765	(% class="table-bordered" %)
766		-|=(% style="width: 102px;" %)Port|=(% style="width: 173px;" %)**Function**|=(% style="width: 122px;" %)**Address**|=(% colspan="2" style="width: 506px;" %)**Description**
	1071	+|=(% scope="row" style="width: 102px;" %)Port|=(% style="width: 173px;" %)**Function**|=(% style="width: 122px;" %)**Address**|=(% colspan="2" style="width: 506px;" %)**Description**
767	767	|(% colspan="1" rowspan="11" style="width:102px" %)COM1|(% style="width:173px" %)Communication mode|(% style="width:122px" %)HSW10061|(% colspan="2" style="width:506px" %)(((
768	768	* =0: RS232
769	769	* =1: RS485
...	...	@@ -793,10 +793,22 @@
793	793	* =1: ODD
794	794	* =2: EVEN
795	795	)))
796		-|(% style="width:173px" %)Wait timeout|(% style="width:122px" %)HSW10066|(% colspan="2" style="width:506px" %)Unit: ms. Range: 0~~30000
797		-|(% style="width:173px" %)reveive timeout|(% style="width:122px" %)HSW10067|(% colspan="2" style="width:506px" %)Unit: ms. Range: 0~~30000
798		-|(% style="width:173px" %)Retry time|(% style="width:122px" %)HSW10068|(% colspan="2" style="width:506px" %)Unit: times. Range: 0~~100
799		-|(% style="width:173px" %)Retry timeout|(% style="width:122px" %)HSW10069|(% colspan="2" style="width:506px" %)Unit: s. Range: 0~~300
	1101	+|(% style="width:173px" %)Wait timeout|(% style="width:122px" %)HSW10066|(% colspan="2" style="width:506px" %)(((
	1102	+* Unit: ms.
	1103	+* Range: 0 to 30000
	1104	+)))
	1105	+|(% style="width:173px" %)reveive timeout|(% style="width:122px" %)HSW10067|(% colspan="2" style="width:506px" %)(((
	1106	+* Unit: ms.
	1107	+* Range: 0 to 30000
	1108	+)))
	1109	+|(% style="width:173px" %)Retry time|(% style="width:122px" %)HSW10068|(% colspan="2" style="width:506px" %)(((
	1110	+* Unit: times.
	1111	+* Range: 0 to 100
	1112	+)))
	1113	+|(% style="width:173px" %)Retry timeout|(% style="width:122px" %)HSW10069|(% colspan="2" style="width:506px" %)(((
	1114	+* Unit: s.
	1115	+* Range: 0 to 300
	1116	+)))
800	800	|(% style="width:173px" %)HMI station number|(% style="width:122px" %)HSW10070|(% colspan="2" style="width:506px" %)
801	801	|(% style="width:173px" %)PLC station number|(% style="width:122px" %)HSW10071|(% colspan="2" style="width:506px" %)
802	802	|(% colspan="1" rowspan="11" style="width:102px" %)COM1-2|(% style="width:173px" %)Communication mode|(% style="width:122px" %)HSW10094|(% colspan="2" style="width:506px" %)(((
...	...	@@ -829,10 +829,22 @@
829	829	* =1: ODD
830	830	* =2: EVEN
831	831	)))
832		-|(% style="width:173px" %)Wait timeout|(% style="width:122px" %)HSW10099|(% colspan="2" style="width:506px" %)Unit: ms. Range: 0~~30000
833		-|(% style="width:173px" %)receive timeout|(% style="width:122px" %)HSW10100|(% colspan="2" style="width:506px" %)Unit: ms. Range: 0~~30000
834		-|(% style="width:173px" %)Retry time|(% style="width:122px" %)HSW10101|(% colspan="2" style="width:506px" %)Unit: times. Range: 0~~100
835		-|(% style="width:173px" %)Retry timeout|(% style="width:122px" %)HSW10102|(% colspan="2" style="width:506px" %)Unit: s. Range: 0~~30
	1149	+|(% style="width:173px" %)Wait timeout|(% style="width:122px" %)HSW10099|(% colspan="2" style="width:506px" %)(((
	1150	+* Unit: ms.
	1151	+* Range: 0 to 30000
	1152	+)))
	1153	+|(% style="width:173px" %)receive timeout|(% style="width:122px" %)HSW10100|(% colspan="2" style="width:506px" %)(((
	1154	+* Unit: ms.
	1155	+* Range: 0 to 30000
	1156	+)))
	1157	+|(% style="width:173px" %)Retry time|(% style="width:122px" %)HSW10101|(% colspan="2" style="width:506px" %)(((
	1158	+* Unit: times.
	1159	+* Range: 0 to 100
	1160	+)))
	1161	+|(% style="width:173px" %)Retry timeout|(% style="width:122px" %)HSW10102|(% colspan="2" style="width:506px" %)(((
	1162	+* Unit: s.
	1163	+* Range: 0 to 30
	1164	+)))
836	836	|(% style="width:173px" %)HMI station number|(% style="width:122px" %)HSW10103|(% colspan="2" style="width:506px" %)
837	837	|(% style="width:173px" %)PLC station number|(% style="width:122px" %)HSW10104|(% colspan="2" style="width:506px" %)
838	838	|(% colspan="1" rowspan="11" style="width:102px" %)COM1-3|(% style="width:173px" %)Communication mode|(% style="width:122px" %)HSW10120|(% colspan="2" style="width:506px" %)(((
...	...	@@ -865,10 +865,22 @@
865	865	* =1: ODD
866	866	* =2: EVEN
867	867	)))
868		-|(% style="width:173px" %)Wait timeout|(% style="width:122px" %)HSW10125|(% colspan="2" style="width:506px" %)Unit: ms. Range: 0~~30000
869		-|(% style="width:173px" %)receive timeout|(% style="width:122px" %)HSW10126|(% colspan="2" style="width:506px" %)Unit: ms. Range: 0~~30000
870		-|(% style="width:173px" %)Retry time|(% style="width:122px" %)HSW10127|(% colspan="2" style="width:506px" %)Unit: times. Range: 0~~100
871		-|(% style="width:173px" %)Retry timeout|(% style="width:122px" %)HSW10128|(% colspan="2" style="width:506px" %)Unit: s. Range: 0~~30
	1197	+|(% style="width:173px" %)Wait timeout|(% style="width:122px" %)HSW10125|(% colspan="2" style="width:506px" %)(((
	1198	+* Unit: ms.
	1199	+* Range: 0 to 30000
	1200	+)))
	1201	+|(% style="width:173px" %)receive timeout|(% style="width:122px" %)HSW10126|(% colspan="2" style="width:506px" %)(((
	1202	+* Unit: ms.
	1203	+* Range: 0 to 30000
	1204	+)))
	1205	+|(% style="width:173px" %)Retry time|(% style="width:122px" %)HSW10127|(% colspan="2" style="width:506px" %)(((
	1206	+* Unit: times.
	1207	+* Range: 0 to 100
	1208	+)))
	1209	+|(% style="width:173px" %)Retry timeout|(% style="width:122px" %)HSW10128|(% colspan="2" style="width:506px" %)(((
	1210	+* Unit: s.
	1211	+* Range: 0 to 30
	1212	+)))
872	872	|(% style="width:173px" %)HMI station number|(% style="width:122px" %)HSW10129|(% colspan="2" style="width:506px" %)
873	873	|(% style="width:173px" %)PLC station number|(% style="width:122px" %)HSW10130|(% colspan="2" style="width:506px" %)
874	874	|(% colspan="1" rowspan="11" style="width:102px" %)COM2|(% style="width:173px" %)Communication mode|(% style="width:122px" %)HSW10072|(% colspan="2" style="width:506px" %)(((
...	...	@@ -899,10 +899,22 @@
899	899	* =1: ODD
900	900	* =2: EVEN
901	901	)))
902		-|(% style="width:173px" %)Wait timeout|(% style="width:122px" %)HSW10077|(% colspan="2" style="width:506px" %)Unit: ms. Range: 0~~30000
903		-|(% style="width:173px" %)receive timeout|(% style="width:122px" %)HSW10078|(% colspan="2" style="width:506px" %)Unit: ms. Range: 0~~30000
904		-|(% style="width:173px" %)Retry time|(% style="width:122px" %)HSW10079|(% colspan="2" style="width:506px" %)Unit: times. Range: 0~~100
905		-|(% style="width:173px" %)Retry timeout|(% style="width:122px" %)HSW10080|(% colspan="2" style="width:506px" %)Unit: s. Range: 0~~30
	1243	+|(% style="width:173px" %)Wait timeout|(% style="width:122px" %)HSW10077|(% colspan="2" style="width:506px" %)(((
	1244	+* Unit: ms.
	1245	+* Range: 0 to 30000
	1246	+)))
	1247	+|(% style="width:173px" %)receive timeout|(% style="width:122px" %)HSW10078|(% colspan="2" style="width:506px" %)(((
	1248	+* Unit: ms.
	1249	+* Range: 0 to 30000
	1250	+)))
	1251	+|(% style="width:173px" %)Retry time|(% style="width:122px" %)HSW10079|(% colspan="2" style="width:506px" %)(((
	1252	+* Unit: times.
	1253	+* Range: 0 to 100
	1254	+)))
	1255	+|(% style="width:173px" %)Retry timeout|(% style="width:122px" %)HSW10080|(% colspan="2" style="width:506px" %)(((
	1256	+* Unit: s.
	1257	+* Range: 0 to 30
	1258	+)))
906	906	|(% style="width:173px" %)HMI station number|(% style="width:122px" %)HSW10081|(% colspan="2" style="width:506px" %)
907	907	|(% style="width:173px" %)PLC station number|(% style="width:122px" %)HSW10082|(% colspan="2" style="width:506px" %)
908	908	|(% colspan="1" rowspan="11" style="width:102px" %)COM2-2|(% style="width:173px" %)Communication mode|(% style="width:122px" %)HSW10105|(% colspan="2" style="width:506px" %)(((
...	...	@@ -933,10 +933,22 @@
933	933	* =1: ODD
934	934	* =2: EVEN
935	935	)))
936		-|(% style="width:173px" %)Wait timeout|(% style="width:122px" %)HSW10110|(% colspan="2" style="width:506px" %)Unit: ms. Range: 0~~30000
937		-|(% style="width:173px" %)receive timeout|(% style="width:122px" %)HSW10111|(% colspan="2" style="width:506px" %)Unit: ms. Range: 0~~30000
938		-|(% style="width:173px" %)Retry time|(% style="width:122px" %)HSW10112|(% colspan="2" style="width:506px" %)Unit: times. Range: 0~~100
939		-|(% style="width:173px" %)Retry timeout|(% style="width:122px" %)HSW10113|(% colspan="2" style="width:506px" %)Unit: s. Range: 0~~30
	1289	+|(% style="width:173px" %)Wait timeout|(% style="width:122px" %)HSW10110|(% colspan="2" style="width:506px" %)(((
	1290	+* Unit: ms.
	1291	+* Range: 0 to 30000
	1292	+)))
	1293	+|(% style="width:173px" %)receive timeout|(% style="width:122px" %)HSW10111|(% colspan="2" style="width:506px" %)(((
	1294	+* Unit: ms.
	1295	+* Range: 0 to 30000
	1296	+)))
	1297	+|(% style="width:173px" %)Retry time|(% style="width:122px" %)HSW10112|(% colspan="2" style="width:506px" %)(((
	1298	+* Unit: times.
	1299	+* Range: 0 to 100
	1300	+)))
	1301	+|(% style="width:173px" %)Retry timeout|(% style="width:122px" %)HSW10113|(% colspan="2" style="width:506px" %)(((
	1302	+* Unit: s.
	1303	+* Range: 0 to 30
	1304	+)))
940	940	|(% style="width:173px" %)HMI station number|(% style="width:122px" %)HSW10114|(% colspan="2" style="width:506px" %)
941	941	|(% style="width:173px" %)PLC station number|(% style="width:122px" %)HSW10115|(% colspan="2" style="width:506px" %)
942	942	|(% colspan="1" rowspan="11" style="width:102px" %)COM3|(% style="width:173px" %)Communication mode|(% style="width:122px" %)HSW10083|(% colspan="2" style="width:506px" %)(((
...	...	@@ -966,29 +966,48 @@
966	966	* =1: ODD
967	967	* =2: EVEN
968	968	)))
969		-|(% style="width:173px" %)Wait timeout|(% style="width:122px" %)HSW10088|(% colspan="2" style="width:506px" %)Unit: ms. Range: 0~~30000
970		-|(% style="width:173px" %)receive timeout|(% style="width:122px" %)HSW10089|(% colspan="2" style="width:506px" %)Unit: ms. Range: 0~~30000
971		-|(% style="width:173px" %)Retry time|(% style="width:122px" %)HSW10090|(% colspan="2" style="width:506px" %)Unit: times. Range: 0~~100
972		-|(% style="width:173px" %)Retry timeout|(% style="width:122px" %)HSW10091|(% colspan="2" style="width:506px" %)Unit: s. Range: 0~~30
	1334	+|(% style="width:173px" %)Wait timeout|(% style="width:122px" %)HSW10088|(% colspan="2" style="width:506px" %)(((
	1335	+* Unit: ms.
	1336	+* Range: 0 to 30000
	1337	+)))
	1338	+|(% style="width:173px" %)receive timeout|(% style="width:122px" %)HSW10089|(% colspan="2" style="width:506px" %)(((
	1339	+* Unit: ms.
	1340	+* Range: 0 to 30000
	1341	+)))
	1342	+|(% style="width:173px" %)Retry time|(% style="width:122px" %)HSW10090|(% colspan="2" style="width:506px" %)(((
	1343	+* Unit: times.
	1344	+* Range: 0 to 100
	1345	+)))
	1346	+|(% style="width:173px" %)Retry timeout|(% style="width:122px" %)HSW10091|(% colspan="2" style="width:506px" %)(((
	1347	+* Unit: s.
	1348	+* Range: 0 to 30
	1349	+)))
973	973	|(% style="width:173px" %)HMI station number|(% style="width:122px" %)HSW10092|(% colspan="2" style="width:506px" %)
974	974	|(% style="width:173px" %)PLC station number|(% style="width:122px" %)HSW10093|(% colspan="2" style="width:506px" %)
975	975	|(% colspan="1" rowspan="2" style="width:102px" %)CAN port|(% style="width:173px" %)CAN1 baud rate|(% style="width:122px" %)HSW010116|(% style="width:299px" %)(((
976		-Unit: K, the baud rate must be an integer, for example, when the baud rate required is 250000, just enter 250.
	1353	+Unit: K, the baud rate must be an integer.
	1354	+
	1355	+For example, when the baud rate required is 250000, just enter 250.
977	977	)))|(% colspan="1" rowspan="2" style="width:218px" %)**✎Note: **If baud rate has been modified,please wait 5 seconds,then restart the HMI to take effect.
978		-|(% style="width:173px" %)CAN2 baud rate|(% style="width:122px" %)HSW010117|(% style="width:299px" %)Unit: K, the baud rate must be an integer, for example, when the baud rate required is 250000, just enter 250.
	1357	+|(% style="width:173px" %)CAN2 baud rate|(% style="width:122px" %)HSW010117|(% style="width:299px" %)(((
	1358	+Unit: K, the baud rate must be an integer.
979	979
980		-== **Ethernet communication configuration** ==
	1360	+For example, when the baud rate required is 250000, just enter 250.
	1361	+)))
981	981
	1363	+== Ethernet communication configuration ==
	1364	+
982	982	(% class="table-bordered" %)
983		-|=(% style="width: 40px;" %)**No.**|=(% style="width: 295px;" %)**Function**|=(% style="width: 220px;" %)**Address**|=(% style="width: 336px;" %)**Description**
	1366	+|(% style="width:40px" %)**No.**|(% style="width:295px" %)**Function**|(% style="width:220px" %)**Address**|(% style="width:336px" %)**Description**
984	984	|(% rowspan="7" style="width:40px" %)1|(% colspan="1" rowspan="7" style="width:295px" %)Ethernet parameter configuration for communication number 1 in list. Configure those addresses according to connected device. After configuration, wait for 5 seconds and restart the HMI.|(% style="width:220px" %)HSW11004|(% style="width:336px" %)Device IP address high word 1
985	985	|(% style="width:220px" %)HSW11005|(% style="width:336px" %)Device IP address high word 2
986	986	|(% style="width:220px" %)HSW11006|(% style="width:336px" %)Device IP address high word 3
987	987	|(% style="width:220px" %)HSW11007|(% style="width:336px" %)Device IP address high word 4
988	988	|(% style="width:220px" %)HSW11008|(% style="width:336px" %)Device Port number
989		-|(% style="width:220px" %)HSW11009|=(% style="width: 336px;" %)(((
990		-* =2 TCP
991		-* =3 UDP
	1372	+|(% style="width:220px" %)HSW11009|(% style="width:336px" %)(((
	1373	+~=2 TCP
	1374	+
	1375	+~=3 UDP
992	992	)))
993	993	|(% style="width:220px" %)HSW11010|(% style="width:336px" %)Reserved
994	994	|(% rowspan="7" style="width:40px" %)2|(% colspan="1" rowspan="7" style="width:295px" %)Ethernet parameter configuration for communication number 2 in list. Configure those addresses according to connected device. After configuration, wait for 5 seconds and restart the HMI.|(% style="width:220px" %)HSW11011|(% style="width:336px" %)Device IP address high word 1
...	...	@@ -996,9 +996,10 @@
996	996	|(% style="width:220px" %)HSW11013|(% style="width:336px" %)Device IP address high word 3
997	997	|(% style="width:220px" %)HSW11014|(% style="width:336px" %)Device IP address high word 4
998	998	|(% style="width:220px" %)HSW11015|(% style="width:336px" %)Device Port number
999		-|(% style="width:220px" %)HSW11016|=(% style="width: 336px;" %)(((
1000		-* =2 TCP
1001		-* =3 UDP
	1383	+|(% style="width:220px" %)HSW11016|(% style="width:336px" %)(((
	1384	+~=2 TCP
	1385	+
	1386	+~=3 UDP
1002	1002	)))
1003	1003	|(% style="width:220px" %)HSW11017|(% style="width:336px" %)Reserved
1004	1004	|(% style="width:40px" %)…|(% style="width:295px" %) |(% style="width:220px" %)…|(% style="width:336px" %)…
...	...	@@ -1007,7 +1007,11 @@
1007	1007	|(% style="width:220px" %)HSW11223|(% style="width:336px" %)Device IP address high word 3
1008	1008	|(% style="width:220px" %)HSW11224|(% style="width:336px" %)Device IP address high word 4
1009	1009	|(% style="width:220px" %)HSW11225|(% style="width:336px" %)Device Port number
1010		-|(% style="width:220px" %)HSW11226|=(% style="width: 336px;" %)2 TCP; =3 UDP
	1395	+|(% style="width:220px" %)HSW11226|(% style="width:336px" %)(((
	1396	+~=2 TCP;
	1397	+
	1398	+~=3 UDP
	1399	+)))
1011	1011	|(% style="width:220px" %)HSW11227|(% style="width:336px" %)Reserved
1012	1012
1013	1013	(% class="box infomessage" %)
...	...	@@ -1015,7 +1015,7 @@
1015	1015	**✎Note:** The number of Ethernet connections supported by different HMI series varies.
1016	1016	)))
1017	1017
1018		-== **Communication control** ==
	1407	+== Communication control ==
1019	1019
1020	1020	(% class="table-bordered" %)
1021	1021	|=(% style="width: 135px;" %)**Communication No.**|=(% style="width: 102px;" %)**Station No.**|=(% style="width: 185px;" %)**Control bit**|=(% style="width: 191px;" %)**Communication lamp**|=(% style="width: 271px;" %)**Description**

6.png

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.Mora

Size

...	...	@@ -1,0 +1,1 @@
	1	+20.1 KB

Content