Changes for page 13 HMI Internal Registers

Summary

• Page properties (2 modified, 0 added, 0 removed)

Details

Page properties

Author

...	...	@@ -1,1 +1,1 @@
1		-XWiki.Stone
	1	+XWiki.Hunter

Content

...	...	@@ -4,11 +4,11 @@
4	4
5	5	*HSW, HDW, HUW, HAW are word address, HSX, HDX, HUX, HAX are bit address.
6	6
7		-1. **System data area (HSW): **A special register defined by the system.
8		-1. **Data storage area (HDW/HDX): **Users store user data.
9		-1. **System data area (HUW): **A special register defined by the system.
10		-1. **System Data (HAW)**: System register used for power-off save.
11		-1. **Recipe index area (RPW): **System register used for recipe index.
	7	+* **System data area (HSW): **A special register defined by the system.
	8	+* **Data storage area (HDW/HDX): **Users store user data.
	9	+* **System data area (HUW): **A special register defined by the system.
	10	+* **System Data (HAW)**: System register used for power-off save.
	11	+* **Recipe index area (RPW): **System register used for recipe index.
12	12
13	13	HMI internal registers are divided into bit address and word address, which can be accessed in two ways (take HDW as an example).
14	14
...	...	@@ -25,6 +25,21 @@
25	25	* The address of the bit address HDX is with a decimal point while word addresses are integers.
26	26	)))
27	27
	28	+(% class="wikigeneratedid" %)
	29	+= Address ranges table =
	30	+
	31	+|=(% scope="row" style="width: 206px;" %)Address Type\HMI Series|=(% style="width: 240px;" %)General Series|=(% style="width: 200px;" %)i Series/HMI+ models|=(% style="width: 136px;" %)ie Series|=(% style="width: 232px;" %)ig Series
	32	+|=(% style="width: 206px;" %)HDW|HDW0-HDW299999|HDW0-HDW299999|HDW0-HDW299999|HDW0-HDW299999
	33	+|=(% style="width: 206px;" %)HSW|HSW0-HSW14999|HSW0-HSW14999|HSW0-HSW14999|HSW0-HSW14999
	34	+|=(% style="width: 206px;" %)HAW|HAW0-HAW199999|HAW0-HAW199999|HAW0-HAW199999|HAW0-HAW199999
	35	+|=(% style="width: 206px;" %)HUW|HUW0-HUW1599|HUW0-HUW1599|HUW0-HUW1599|HUW0-HUW1599
	36	+|=(% style="width: 206px;" %)HDX|HDX0.0-HDX299999.15|HDX0.0-HDX299999.15|HDX0.0-HDX299999.15|HDX0.0-HDX299999.15
	37	+|=(% style="width: 206px;" %)HSX|HSX0.0-HSX14999.15|HSX0.0-HSX14999.15|HSX0-HSX14999.15|HSX0.0-HSX14999.15
	38	+|=(% style="width: 206px;" %)HAX|HAX0.0-HAX199999.15|HAX0.0-HAX199999.15|HAX0.0-HAX199999.15|HAX0.0-HAX199999.15
	39	+|=(% style="width: 206px;" %)HUX|HUX0.0-HUX1599.15|HUX0.0-HUX1599.15|HUX0.0-HUX1599.15|HUX0.0-HUX1599.15
	40	+|=(% style="width: 206px;" %)RPW| |RPW000000-RPW990450|RPW000000-RPW990450|RPW000000-RPW990450
	41	+|=(% style="width: 206px;" %) |(% style="width:240px" %) |(% style="width:200px" %) |(% style="width:136px" %) |(% style="width:232px" %)
	42	+
28	28	= **Data storage area (HDW/HDX)** =
29	29
30	30	It is used to save the temporary data of project.
...	...	@@ -241,8 +241,8 @@
241	241	* =2: HSX521.1=1, delete all trend graph.
242	242	* =4: HSX521.2=1, delete all alarms.
243	243	* =16: HSX521.4=1, delete history XY plot.
244		-* =32: HSX521.5=1, delete data records in SD card or flash dish;(Please make a setting which is saved to flash disk or SD card in project setting).
245		-* =64: HSX521.6=1, delete alarms records in SD card or flash dish; (Please make a setting which is saved to flash disk or SD card in project setting).
	259	+* =32: HSX521.5=1, delete data records in SD card or USB flash disk;(Please make a setting which is saved to USB flash disk or SD card in project setting).
	260	+* =64: HSX521.6=1, delete alarms records in SD card or USB flash disk; (Please make a setting which is saved to USB flash disk or SD card in project setting).
246	246	)))
247	247	|=(% style="width: 160px;" %)HSW522|(% style="width:282px" %)Copy and paste the alarm/data files in flash to the USB flash disk|(% style="width:452px" %)(((
248	248	* =0: No operation
...	...	@@ -485,6 +485,8 @@
485	485	* =0, Default value
486	486	* =1, Release the alarm generated before the last power-down when starting up
487	487	)))
	503	+|=(% style="width: 160px;" %)HSW1200|(% colspan="1" rowspan="2" style="width:282px" %)TSAP settings for HMI in the Siemens LOGO! 8 protocol(ig series or HMI V2.0)|(% style="width:452px" %)HMI local TSAP, which corresponds to the remote TSAP of PLC
	504	+|=(% style="width: 160px;" %)HSW1201|(% style="width:452px" %)HMI remote TSAP, which corresponds to the local TSAP of PLC
488	488	|=(% style="width: 160px;" %)HSW1450|(% style="width:282px" %)Enable objects level password function|(% style="width:452px" %)(((
489	489	* =0, Disable
490	490	* =1, Enable
...	...	@@ -591,6 +591,9 @@
591	591	* =0: Server connection exception
592	592	* =1: Server connection is OK
593	593	)))
	611	+|=(% style="width: 160px;" %)HSW1740|(% style="width:282px" %)Wi-fi signal strength|(% style="width:452px" %)(((
	612	+Display the value of Wi-fi signal signal strength, ranges from 0~~100 (Signal strength is automatically obtained only once when HMI is powered on, and it will not be automatically updated. It needs to be used with the HSW1890)
	613	+)))
594	594	|=(% style="width: 160px;" %)HSW1741|(% colspan="1" rowspan="12" style="width:282px" %)Related IP register in 4Gnetwork status (It is valid when HMI is connected to 4G)|(% style="width:452px" %)Local IP address high byte 1
595	595	|=(% style="width: 160px;" %)HSW1742|(% style="width:452px" %)Local IP address high byte 2
596	596	|=(% style="width: 160px;" %)HSW1743|(% style="width:452px" %)Local IP address high byte 3
...	...	@@ -618,10 +618,180 @@
618	618	* =1: Server connection is OK
619	619	)))
620	620	|=(% style="width: 160px;" %)HSW1761|(% style="width:282px" %)Display 4G network signal strength|(% style="width:452px" %)Signal strength: 0~~31. The greater the value ,the signal is stronger
	641	+|=(% style="width: 160px;" %)(((
	642	+HSW1762
	643	+)))|(% colspan="1" rowspan="13" style="width:282px" %)(((
	644	+Note: Valid when Ethernet2 of HMI is plugged into the network cable.
	645	+①、When the Ethernet setting is enabled in the project parameters, this register displays the set value.
	646	+②. When the Ethernet setting is not enabled in the engineering parameters, the register displays the Ethernet IP automatically acquired by the HMI.
	647	+③. When the HMI is not plugged into the network cable, the register will show 0 whether the engineering parameters are set or not.
	648	+④.IP related registers can be read and written (only static IP mode can be written).
	649	+)))|(% style="width:452px" %)(((
	650	+Ethernet2 Local IP address high byte 1
	651	+)))
	652	+|=(% style="width: 160px;" %)(((
	653	+HSW1763
	654	+)))|(% style="width:452px" %)(((
	655	+Ethernet2 Local IP address high byte 2
	656	+)))
	657	+|=(% style="width: 160px;" %)(((
	658	+HSW1764
	659	+)))|(% style="width:452px" %)(((
	660	+Ethernet2 Local IP address high byte 3
	661	+)))
	662	+|=(% style="width: 160px;" %)(((
	663	+HSW1765
	664	+)))|(% style="width:452px" %)(((
	665	+Ethernet2 Local IP address high byte 4
	666	+)))
	667	+|=(% style="width: 160px;" %)(((
	668	+HSW1766
	669	+)))|(% style="width:452px" %)(((
	670	+Ethernet2 Local mask IP address high byte 1
	671	+)))
	672	+|=(% style="width: 160px;" %)(((
	673	+HSW1767
	674	+)))|(% style="width:452px" %)(((
	675	+Ethernet2 Local mask IP address high byte 2
	676	+)))
	677	+|=(% style="width: 160px;" %)(((
	678	+HSW1768
	679	+)))|(% style="width:452px" %)Ethernet2 Local mask IP address high byte 3
	680	+|=(% style="width: 160px;" %)HSW1769|(% style="width:452px" %)Ethernet2 Local mask IP address high byte 4
	681	+|=(% style="width: 160px;" %)(((
	682	+HSW1770
	683	+)))|(% style="width:452px" %)(((
	684	+Ethernet2 Local gateway IP address high byte 1
	685	+)))
	686	+|=(% style="width: 160px;" %)(((
	687	+HSW1771
	688	+)))|(% style="width:452px" %)(((
	689	+Ethernet2 Local gateway IP address high byte 2
	690	+)))
	691	+|=(% style="width: 160px;" %)(((
	692	+HSW1772
	693	+)))|(% style="width:452px" %)(((
	694	+Ethernet2 Local gateway IP address high byte 3
	695	+)))
	696	+|=(% style="width: 160px;" %)(((
	697	+HSW1773
	698	+)))|(% style="width:452px" %)(((
	699	+Ethernet2 Local gateway IP address high byte 4
	700	+)))
	701	+|=(% style="width: 160px;" %)(((
	702	+HSW1774
	703	+)))|(% style="width:452px" %)(((
	704	+Ethernet2 Local Port Address
	705	+)))
	706	+|=(% style="width: 160px;" %)(((
	707	+HSW1775
	708	+)))|(% colspan="1" rowspan="6" style="width:282px" %)(((
	709	+①Display the MAC code of Ethernet2 NIC
	710	+
	711	+(hexadecimal display)
	712	+
	713	+②Read-only mode, not modifiable
	714	+)))|(% style="width:452px" %)(((
	715	+Ethernet2 Local MAC code high byte 1
	716	+)))
	717	+|=(% style="width: 160px;" %)(((
	718	+HSW1776
	719	+)))|(% style="width:452px" %)(((
	720	+Ethernet2 Local MAC code high byte 2
	721	+)))
	722	+|=(% style="width: 160px;" %)(((
	723	+HSW1777
	724	+)))|(% style="width:452px" %)(((
	725	+Ethernet2 Local MAC code high byte 3
	726	+)))
	727	+|=(% style="width: 160px;" %)(((
	728	+HSW1778
	729	+)))|(% style="width:452px" %)(((
	730	+Ethernet2 Local MAC code high byte 4
	731	+)))
	732	+|=(% style="width: 160px;" %)(((
	733	+HSW1779
	734	+)))|(% style="width:452px" %)(((
	735	+Ethernet2 Local MAC code high byte 5
	736	+)))
	737	+|=(% style="width: 160px;" %)(((
	738	+HSW1780
	739	+)))|(% style="width:452px" %)(((
	740	+Ethernet2 Local MAC code high byte 6
	741	+)))
	742	+|=(% style="width: 160px;" %)(((
	743	+HSW1781
	744	+)))|(% colspan="1" rowspan="8" style="width:282px" %)(((
	745	+①Display and modify DNS1 and DNS2 of Ethernet2
	746	+
	747	+②Related registers can be read and written mode (only static IP mode can be written)
	748	+)))|(% style="width:452px" %)(((
	749	+Ethernet2 Local DNS1 address high byte 1
	750	+)))
	751	+|=(% style="width: 160px;" %)(((
	752	+HSW1782
	753	+)))|(% style="width:452px" %)(((
	754	+Ethernet2 Local DNS1 address high byte 2
	755	+)))
	756	+|=(% style="width: 160px;" %)(((
	757	+HSW1783
	758	+)))|(% style="width:452px" %)(((
	759	+Ethernet2 Local DNS1 address high byte 3
	760	+)))
	761	+|=(% style="width: 160px;" %)(((
	762	+HSW1784
	763	+)))|(% style="width:452px" %)(((
	764	+Ethernet2 Local DNS1 address high byte 4
	765	+)))
	766	+|=(% style="width: 160px;" %)(((
	767	+HSW1785
	768	+)))|(% style="width:452px" %)(((
	769	+Ethernet2 Local DNS2 address high byte 1
	770	+)))
	771	+|=(% style="width: 160px;" %)(((
	772	+HSW1786
	773	+)))|(% style="width:452px" %)(((
	774	+Ethernet2 Local DNS2 address high byte 2
	775	+)))
	776	+|=(% style="width: 160px;" %)(((
	777	+HSW1787
	778	+)))|(% style="width:452px" %)(((
	779	+Ethernet2 Local DNS2 address high byte 3
	780	+)))
	781	+|=(% style="width: 160px;" %)(((
	782	+HSW1788
	783	+)))|(% style="width:452px" %)(((
	784	+Ethernet2 Local DNS2 address high byte 4
	785	+)))
	786	+|=(% style="width: 160px;" %)(((
	787	+HSW1789
	788	+)))|(% colspan="1" style="width:282px" %)(((
	789	+Display or set the dynamic or static IP mode of Ethernet2
	790	+)))|(% style="width:452px" %)(((
	791	+HSX1789.0 = 0, Static IP mode
	792	+
	793	+HSX1789.0 = 1, dynamic IP mode
	794	+)))
	795	+|=(% style="width: 160px;" %)(((
	796	+HSW1790
	797	+)))|(% colspan="1" style="width:282px" %)(((
	798	+Confirm Ethernet2 IP, subnet mask, gateway, DNS1, DNS2, and dynamic static IP settings
	799	+)))|(% style="width:452px" %)(((
	800	+~= 1, confirm the setting (i.e., after modifying IP-related information, set this address to 1, representing confirmation of the modification, after which it will be reset to 0)
	801	+)))
	802	+|=(% style="width: 160px;" %)(((
	803	+HSW1791
	804	+)))|(% colspan="1" style="width:282px" %)(((
	805	+Network status of the Ethernet2 connection server
	806	+)))|(% style="width:452px" %)(((
	807	+~= 0, connection to the server is abnormal = 1, connection to the server is normal
	808	+)))
621	621	|=(% style="width: 160px;" %)HSW1852|(% style="width:282px" %)Control the interval in two consecutive clicks|(% style="width:452px" %)Limit range: 1~~500ms. The default is 100 ms.
622	622	|=(% style="width: 160px;" %)HSW1853|(% style="width:282px" %)File format for exporting data records to USB flash drive or SD card|(% style="width:452px" %)(((
623	623	* =0: db database
624	624	* =1: CSV
	813	+
	814	+(Only valid for script function DbToCsvFile)
625	625	)))
626	626	|=(% style="width: 160px;" %)HSW1854|(% style="width:282px" %)High and low word conversion type|(% style="width:452px" %)(((
627	627	* =0: use the old high-low word conversion (default)
...	...	@@ -643,30 +643,96 @@
643	643	* =1: download firmware
644	644	* =2: enter the background
645	645	)))
646		-|=(% style="width: 160px;" %)HSW1866|(% style="width:282px" %)Delete the LUa extension module file|(% style="width:452px" %)(((
647		-* =1, delete;
648		-* = Others, do not delete
	836	+|=(% style="width: 160px;" %)HSW1865|(% style="width:282px" %)Priority connection to the cloud|(% style="width:452px" %)(((
	837	+* =0: priority Ethernet
	838	+* =1: priority WLAN
	839	+* =2: priority 4G
649	649	)))
	841	+|=(% style="width: 160px;" %)HSW1866|(% style="width:282px" %)Delete the Lua extension module file|(% style="width:452px" %)(((
	842	+* =0: delete;
	843	+* = Others: do not delete
	844	+)))
650	650	|=(% style="width: 160px;" %)HSW1867|(% style="width:282px" %)Reset mode|(% style="width:452px" %)(((
651	651	Monitor address is set during reset of reset switch, whether to cancel reset,
652	652
653		-* = 0, yes (default);
654		-* = 1, no
	848	+* = 0: yes (default);
	849	+* = 1: no
655	655	)))
656	656	|=(% style="width: 160px;" %)HSW1868|(% style="width:282px" %)Double-click or long press the record type table mode|(% style="width:452px" %)(((
657	657	Controls whether the button pops up when double-clicking or long pressing on record type table object
658	658
659		-* = 0, yes (default);
660		-* = 1, no
	854	+* = 0: yes (default);
	855	+* = 1: no
661	661	)))
	857	+|=(% style="width: 160px;" %)(((
	858	+HSW1869
	859	+)))|(% style="width:282px" %)(((
	860	+Dynamic screensaver countdown
	861	+)))|(% style="width:452px" %)(((
	862	+Countdown to enter dynamic screensaver effect, unit (S)
	863	+)))
	864	+|=(% style="width: 160px;" %)(((
	865	+HSW1870
	866	+)))|(% style="width:282px" %)(((
	867	+Display or set the dynamic or static IP mode of Ethernet1
	868	+)))|(% style="width:452px" %)(((
	869	+HSX1870.0 = 0, Static IP mode
	870	+
	871	+HSX1870.0 = 1, dynamic IP mode
	872	+)))
	873	+|=(% style="width: 160px;" %)(((
	874	+HSW1871
	875	+)))|(% style="width:282px" %)(((
	876	+Confirm the IP, subnet mask, gateway, DNS1, DNS2, and dynamic static IP settings for Ethernet1
	877	+)))|(% style="width:452px" %)(((
	878	+~= 1, confirm the setting (i.e., after modifying IP-related information, set this address to 1, representing confirmation of the modification, after which it will be reset to 0)
	879	+)))
	880	+|=(% style="width: 160px;" %)(((
	881	+HSW1872
	882	+)))|(% colspan="1" rowspan="8" style="width:282px" %)(((
	883	+①Display and modify DNS1 and DNS2 of Ethernet1
	884	+
	885	+②Related registers can be read and written mode (only static IP mode can be written)
	886	+)))|(% style="width:452px" %)(((
	887	+Ethernet1 Local DNS1 address high byte 1
	888	+)))
	889	+|=(% style="width: 160px;" %)(((
	890	+HSW1873
	891	+)))|(% style="width:452px" %)Ethernet1 Local DNS1 address high byte 2
	892	+|=(% style="width: 160px;" %)(((
	893	+HSW1874
	894	+)))|(% style="width:452px" %)Ethernet1 Local DNS1 address high byte 3
	895	+|=(% style="width: 160px;" %)(((
	896	+HSW1875
	897	+)))|(% style="width:452px" %)Ethernet1 Local DNS1 address high byte 4
	898	+|=(% style="width: 160px;" %)(((
	899	+HSW1876
	900	+)))|(% style="width:452px" %)Ethernet1 Local DNS2 address high byte 1
	901	+|=(% style="width: 160px;" %)(((
	902	+HSW1877
	903	+)))|(% style="width:452px" %)Ethernet1 Local DNS2 address high byte 2
	904	+|=(% style="width: 160px;" %)(((
	905	+HSW1878
	906	+)))|(% style="width:452px" %)Ethernet1 Local DNS2 address high byte 3
	907	+|=(% style="width: 160px;" %)(((
	908	+HSW1879
	909	+)))|(% style="width:452px" %)Ethernet1 Local DNS2 address high byte 4
	910	+|=(% style="width: 160px;" %)HSW1890|(% colspan="1" style="width:282px" %)Enable refresh current network signal|(% style="width:452px" %)(((
	911	+* =1: Refresh the network signal once after triggered (This register will be automatically reset after triggered, only update the signal value once after per 15 seconds, not able to update twice in the short interval)
	912	+* =Others: not refresh
	913	+)))
	914	+|=(% style="width: 160px;" %)HSW1891|(% colspan="1" style="width:282px" %)Enable clear cache for screen data  |(% style="width:452px" %)(((
	915	+* =1, not clear screen cache when switch language
	916	+* =2, trigger clear cache of all screens for once time
	917	+* =3, always clear cache of all screen data
	918	+)))
662	662	|=(% style="width: 160px;" %)HSW10000~~19999|(% style="width:282px" %)Power-down storage area|(% style="width:452px" %)After restart, the data remains
663	663	|=(% style="width: 160px;" %)HSW10035|(% rowspan="13" style="width:282px" %)(((
664		-**✎Note: **Only valid when the HMI is plugged into the Ethernet cable.
665		-
666		-1. If Ethernet settings is enabled in project parameters, this register displays the set value.
667		-1. If Ethernet settings is not enabled in project parameters, IP would automatically obtained IP.
668		-1. If HMI is not connected to the network, the register is displayed as 0 whether the engineering parameters are set.
669		-1. 4. All IP registers of HMI are read-only.
	921	+Note: Valid when Ethernet1 of HMI is plugged into the network cable.
	922	+①、When the Ethernet setting is enabled in the project parameters, this register displays the set value.
	923	+②. When the Ethernet setting is not enabled in the engineering parameters, the register displays the Ethernet IP automatically acquired by the HMI.
	924	+③. When the HMI is not plugged into the network cable, the register will show 0 whether the engineering parameters are set or not.
	925	+④.IP related registers can be read and written (only static IP mode can be written).
670	670	)))|(% style="width:452px" %)Local IP address high byte 1
671	671	|=(% style="width: 160px;" %)HSW10036|(% style="width:452px" %)Local IP address high byte 2
672	672	|=(% style="width: 160px;" %)HSW10037|(% style="width:452px" %)Local IP address high byte 3
...	...	@@ -681,9 +681,11 @@
681	681	|=(% style="width: 160px;" %)HSW10046|(% style="width:452px" %)Local gateway address high byte 4
682	682	|=(% style="width: 160px;" %)HSW10047|(% style="width:452px" %)Local port address
683	683	|=(% style="width: 160px;" %)HSW10048|(% rowspan="6" style="width:282px" %)(((
684		-Displays the MAC code of the current network card
	940	+①Display the MAC code of Ethernet1 NIC
685	685
686		-(Hexadecimal display)
	942	+(hexadecimal display)
	943	+
	944	+②Read-only mode, not modifiable
687	687	)))|(% style="width:452px" %)Local MAC code high word 1
688	688	|=(% style="width: 160px;" %)HSW10049|(% style="width:452px" %)Local MAC code high word 2
689	689	|=(% style="width: 160px;" %)HSW10050|(% style="width:452px" %)Local MAC code high word 3
...	...	@@ -690,7 +690,7 @@
690	690	|=(% style="width: 160px;" %)HSW10051|(% style="width:452px" %)Local MAC code high word 4
691	691	|=(% style="width: 160px;" %)HSW10052|(% style="width:452px" %)Local MAC code high word 5
692	692	|=(% style="width: 160px;" %)HSW10053|(% style="width:452px" %)Local MAC code high word 6
693		-|=(% style="width: 160px;" %)HSW10118|(% colspan="1" rowspan="2" style="width:282px" %)TSAP settings for HMI in the Siemens logo! 8 protocol|(% style="width:452px" %)HMI local TSAP, which corresponds to the remote TSAP of PLC
	951	+|=(% style="width: 160px;" %)HSW10118|(% colspan="1" rowspan="2" style="width:282px" %)TSAP settings for HMI in the Siemens LOGO! 8 protocol|(% style="width:452px" %)HMI local TSAP, which corresponds to the remote TSAP of PLC
694	694	|=(% style="width: 160px;" %)HSW10119|(% style="width:452px" %)HMI remote TSAP, which corresponds to the local TSAP of PLC
695	695	|=(% style="width: 160px;" %)HSW10461~~10493|(% style="width:282px" %)Remote access password|(% style="width:452px" %)8-character remote access password
696	696	|=(% style="width: 160px;" %)HSW10494~~10558|(% style="width:282px" %)Machine ID (Read only)|(% style="width:452px" %)Machine ID for remote access (read only 64-bit)
...	...	@@ -772,9 +772,36 @@
772	772	)))
773	773	|=(% style="width: 160px;" %)HSW11760|(% style="width:282px" %)Screensaver countdown|(% style="width:452px" %)Display the countdown to enter the Screensaver, unit: second.
774	774	|=(% style="width: 160px;" %)HSW11761|(% style="width:282px" %)Screensaver screen number|(% style="width:452px" %)Set the screen number for Screensaver
	1033	+|=(% style="width: 160px;" %)(((
	1034	+HSW11762
	1035	+)))|(% style="width:282px" %)(((
	1036	+Dynamic screensaver control address
	1037	+)))|(% style="width:452px" %)(((
	1038	+HSX11762.0=0, initialize with project configuration;
775	775
776		-== **Serial port communication configuration** ==
	1040	+HSX11762.0=1, initialize with special register configuration;
777	777
	1042	+HSX11762.1=0, disable dynamic screensaver;
	1043	+
	1044	+HSX11762.1=1, enable dynamic screensaver
	1045	+)))
	1046	+|=(% style="width: 160px;" %)(((
	1047	+HSW11763
	1048	+)))|(% style="width:282px" %)(((
	1049	+Waiting time to enter the dynamic screensaver
	1050	+)))|(% style="width:452px" %)(((
	1051	+Waiting time when the screen is not operated, range 1~~720 minutes
	1052	+)))
	1053	+|=(% style="width: 160px;" %)(((
	1054	+HSW11764
	1055	+)))|(% style="width:282px" %)(((
	1056	+Animated screensaver animation type
	1057	+)))|(% style="width:452px" %)(((
	1058	+~=0: Raster,=1: Blinds,=2: Bubble
	1059	+)))
	1060	+
	1061	+== Serial port communication configuration ==
	1062	+
778	778	(% class="table-bordered" %)
779	779	|=(% scope="row" style="width: 102px;" %)Port|=(% style="width: 173px;" %)**Function**|=(% style="width: 122px;" %)**Address**|=(% colspan="2" style="width: 506px;" %)**Description**
780	780	|(% colspan="1" rowspan="11" style="width:102px" %)COM1|(% style="width:173px" %)Communication mode|(% style="width:122px" %)HSW10061|(% colspan="2" style="width:506px" %)(((
...	...	@@ -806,10 +806,22 @@
806	806	* =1: ODD
807	807	* =2: EVEN
808	808	)))
809		-|(% style="width:173px" %)Wait timeout|(% style="width:122px" %)HSW10066|(% colspan="2" style="width:506px" %)Unit: ms. Range: 0~~30000
810		-|(% style="width:173px" %)reveive timeout|(% style="width:122px" %)HSW10067|(% colspan="2" style="width:506px" %)Unit: ms. Range: 0~~30000
811		-|(% style="width:173px" %)Retry time|(% style="width:122px" %)HSW10068|(% colspan="2" style="width:506px" %)Unit: times. Range: 0~~100
812		-|(% style="width:173px" %)Retry timeout|(% style="width:122px" %)HSW10069|(% colspan="2" style="width:506px" %)Unit: s. Range: 0~~300
	1094	+|(% style="width:173px" %)Wait timeout|(% style="width:122px" %)HSW10066|(% colspan="2" style="width:506px" %)(((
	1095	+* Unit: ms.
	1096	+* Range: 0 to 30000
	1097	+)))
	1098	+|(% style="width:173px" %)reveive timeout|(% style="width:122px" %)HSW10067|(% colspan="2" style="width:506px" %)(((
	1099	+* Unit: ms.
	1100	+* Range: 0 to 30000
	1101	+)))
	1102	+|(% style="width:173px" %)Retry time|(% style="width:122px" %)HSW10068|(% colspan="2" style="width:506px" %)(((
	1103	+* Unit: times.
	1104	+* Range: 0 to 100
	1105	+)))
	1106	+|(% style="width:173px" %)Retry timeout|(% style="width:122px" %)HSW10069|(% colspan="2" style="width:506px" %)(((
	1107	+* Unit: s.
	1108	+* Range: 0 to 300
	1109	+)))
813	813	|(% style="width:173px" %)HMI station number|(% style="width:122px" %)HSW10070|(% colspan="2" style="width:506px" %)
814	814	|(% style="width:173px" %)PLC station number|(% style="width:122px" %)HSW10071|(% colspan="2" style="width:506px" %)
815	815	|(% colspan="1" rowspan="11" style="width:102px" %)COM1-2|(% style="width:173px" %)Communication mode|(% style="width:122px" %)HSW10094|(% colspan="2" style="width:506px" %)(((
...	...	@@ -842,10 +842,22 @@
842	842	* =1: ODD
843	843	* =2: EVEN
844	844	)))
845		-|(% style="width:173px" %)Wait timeout|(% style="width:122px" %)HSW10099|(% colspan="2" style="width:506px" %)Unit: ms. Range: 0~~30000
846		-|(% style="width:173px" %)receive timeout|(% style="width:122px" %)HSW10100|(% colspan="2" style="width:506px" %)Unit: ms. Range: 0~~30000
847		-|(% style="width:173px" %)Retry time|(% style="width:122px" %)HSW10101|(% colspan="2" style="width:506px" %)Unit: times. Range: 0~~100
848		-|(% style="width:173px" %)Retry timeout|(% style="width:122px" %)HSW10102|(% colspan="2" style="width:506px" %)Unit: s. Range: 0~~30
	1142	+|(% style="width:173px" %)Wait timeout|(% style="width:122px" %)HSW10099|(% colspan="2" style="width:506px" %)(((
	1143	+* Unit: ms.
	1144	+* Range: 0 to 30000
	1145	+)))
	1146	+|(% style="width:173px" %)receive timeout|(% style="width:122px" %)HSW10100|(% colspan="2" style="width:506px" %)(((
	1147	+* Unit: ms.
	1148	+* Range: 0 to 30000
	1149	+)))
	1150	+|(% style="width:173px" %)Retry time|(% style="width:122px" %)HSW10101|(% colspan="2" style="width:506px" %)(((
	1151	+* Unit: times.
	1152	+* Range: 0 to 100
	1153	+)))
	1154	+|(% style="width:173px" %)Retry timeout|(% style="width:122px" %)HSW10102|(% colspan="2" style="width:506px" %)(((
	1155	+* Unit: s.
	1156	+* Range: 0 to 30
	1157	+)))
849	849	|(% style="width:173px" %)HMI station number|(% style="width:122px" %)HSW10103|(% colspan="2" style="width:506px" %)
850	850	|(% style="width:173px" %)PLC station number|(% style="width:122px" %)HSW10104|(% colspan="2" style="width:506px" %)
851	851	|(% colspan="1" rowspan="11" style="width:102px" %)COM1-3|(% style="width:173px" %)Communication mode|(% style="width:122px" %)HSW10120|(% colspan="2" style="width:506px" %)(((
...	...	@@ -878,10 +878,22 @@
878	878	* =1: ODD
879	879	* =2: EVEN
880	880	)))
881		-|(% style="width:173px" %)Wait timeout|(% style="width:122px" %)HSW10125|(% colspan="2" style="width:506px" %)Unit: ms. Range: 0~~30000
882		-|(% style="width:173px" %)receive timeout|(% style="width:122px" %)HSW10126|(% colspan="2" style="width:506px" %)Unit: ms. Range: 0~~30000
883		-|(% style="width:173px" %)Retry time|(% style="width:122px" %)HSW10127|(% colspan="2" style="width:506px" %)Unit: times. Range: 0~~100
884		-|(% style="width:173px" %)Retry timeout|(% style="width:122px" %)HSW10128|(% colspan="2" style="width:506px" %)Unit: s. Range: 0~~30
	1190	+|(% style="width:173px" %)Wait timeout|(% style="width:122px" %)HSW10125|(% colspan="2" style="width:506px" %)(((
	1191	+* Unit: ms.
	1192	+* Range: 0 to 30000
	1193	+)))
	1194	+|(% style="width:173px" %)receive timeout|(% style="width:122px" %)HSW10126|(% colspan="2" style="width:506px" %)(((
	1195	+* Unit: ms.
	1196	+* Range: 0 to 30000
	1197	+)))
	1198	+|(% style="width:173px" %)Retry time|(% style="width:122px" %)HSW10127|(% colspan="2" style="width:506px" %)(((
	1199	+* Unit: times.
	1200	+* Range: 0 to 100
	1201	+)))
	1202	+|(% style="width:173px" %)Retry timeout|(% style="width:122px" %)HSW10128|(% colspan="2" style="width:506px" %)(((
	1203	+* Unit: s.
	1204	+* Range: 0 to 30
	1205	+)))
885	885	|(% style="width:173px" %)HMI station number|(% style="width:122px" %)HSW10129|(% colspan="2" style="width:506px" %)
886	886	|(% style="width:173px" %)PLC station number|(% style="width:122px" %)HSW10130|(% colspan="2" style="width:506px" %)
887	887	|(% colspan="1" rowspan="11" style="width:102px" %)COM2|(% style="width:173px" %)Communication mode|(% style="width:122px" %)HSW10072|(% colspan="2" style="width:506px" %)(((
...	...	@@ -912,10 +912,22 @@
912	912	* =1: ODD
913	913	* =2: EVEN
914	914	)))
915		-|(% style="width:173px" %)Wait timeout|(% style="width:122px" %)HSW10077|(% colspan="2" style="width:506px" %)Unit: ms. Range: 0~~30000
916		-|(% style="width:173px" %)receive timeout|(% style="width:122px" %)HSW10078|(% colspan="2" style="width:506px" %)Unit: ms. Range: 0~~30000
917		-|(% style="width:173px" %)Retry time|(% style="width:122px" %)HSW10079|(% colspan="2" style="width:506px" %)Unit: times. Range: 0~~100
918		-|(% style="width:173px" %)Retry timeout|(% style="width:122px" %)HSW10080|(% colspan="2" style="width:506px" %)Unit: s. Range: 0~~30
	1236	+|(% style="width:173px" %)Wait timeout|(% style="width:122px" %)HSW10077|(% colspan="2" style="width:506px" %)(((
	1237	+* Unit: ms.
	1238	+* Range: 0 to 30000
	1239	+)))
	1240	+|(% style="width:173px" %)receive timeout|(% style="width:122px" %)HSW10078|(% colspan="2" style="width:506px" %)(((
	1241	+* Unit: ms.
	1242	+* Range: 0 to 30000
	1243	+)))
	1244	+|(% style="width:173px" %)Retry time|(% style="width:122px" %)HSW10079|(% colspan="2" style="width:506px" %)(((
	1245	+* Unit: times.
	1246	+* Range: 0 to 100
	1247	+)))
	1248	+|(% style="width:173px" %)Retry timeout|(% style="width:122px" %)HSW10080|(% colspan="2" style="width:506px" %)(((
	1249	+* Unit: s.
	1250	+* Range: 0 to 30
	1251	+)))
919	919	|(% style="width:173px" %)HMI station number|(% style="width:122px" %)HSW10081|(% colspan="2" style="width:506px" %)
920	920	|(% style="width:173px" %)PLC station number|(% style="width:122px" %)HSW10082|(% colspan="2" style="width:506px" %)
921	921	|(% colspan="1" rowspan="11" style="width:102px" %)COM2-2|(% style="width:173px" %)Communication mode|(% style="width:122px" %)HSW10105|(% colspan="2" style="width:506px" %)(((
...	...	@@ -946,10 +946,22 @@
946	946	* =1: ODD
947	947	* =2: EVEN
948	948	)))
949		-|(% style="width:173px" %)Wait timeout|(% style="width:122px" %)HSW10110|(% colspan="2" style="width:506px" %)Unit: ms. Range: 0~~30000
950		-|(% style="width:173px" %)receive timeout|(% style="width:122px" %)HSW10111|(% colspan="2" style="width:506px" %)Unit: ms. Range: 0~~30000
951		-|(% style="width:173px" %)Retry time|(% style="width:122px" %)HSW10112|(% colspan="2" style="width:506px" %)Unit: times. Range: 0~~100
952		-|(% style="width:173px" %)Retry timeout|(% style="width:122px" %)HSW10113|(% colspan="2" style="width:506px" %)Unit: s. Range: 0~~30
	1282	+|(% style="width:173px" %)Wait timeout|(% style="width:122px" %)HSW10110|(% colspan="2" style="width:506px" %)(((
	1283	+* Unit: ms.
	1284	+* Range: 0 to 30000
	1285	+)))
	1286	+|(% style="width:173px" %)receive timeout|(% style="width:122px" %)HSW10111|(% colspan="2" style="width:506px" %)(((
	1287	+* Unit: ms.
	1288	+* Range: 0 to 30000
	1289	+)))
	1290	+|(% style="width:173px" %)Retry time|(% style="width:122px" %)HSW10112|(% colspan="2" style="width:506px" %)(((
	1291	+* Unit: times.
	1292	+* Range: 0 to 100
	1293	+)))
	1294	+|(% style="width:173px" %)Retry timeout|(% style="width:122px" %)HSW10113|(% colspan="2" style="width:506px" %)(((
	1295	+* Unit: s.
	1296	+* Range: 0 to 30
	1297	+)))
953	953	|(% style="width:173px" %)HMI station number|(% style="width:122px" %)HSW10114|(% colspan="2" style="width:506px" %)
954	954	|(% style="width:173px" %)PLC station number|(% style="width:122px" %)HSW10115|(% colspan="2" style="width:506px" %)
955	955	|(% colspan="1" rowspan="11" style="width:102px" %)COM3|(% style="width:173px" %)Communication mode|(% style="width:122px" %)HSW10083|(% colspan="2" style="width:506px" %)(((
...	...	@@ -979,29 +979,48 @@
979	979	* =1: ODD
980	980	* =2: EVEN
981	981	)))
982		-|(% style="width:173px" %)Wait timeout|(% style="width:122px" %)HSW10088|(% colspan="2" style="width:506px" %)Unit: ms. Range: 0~~30000
983		-|(% style="width:173px" %)receive timeout|(% style="width:122px" %)HSW10089|(% colspan="2" style="width:506px" %)Unit: ms. Range: 0~~30000
984		-|(% style="width:173px" %)Retry time|(% style="width:122px" %)HSW10090|(% colspan="2" style="width:506px" %)Unit: times. Range: 0~~100
985		-|(% style="width:173px" %)Retry timeout|(% style="width:122px" %)HSW10091|(% colspan="2" style="width:506px" %)Unit: s. Range: 0~~30
	1327	+|(% style="width:173px" %)Wait timeout|(% style="width:122px" %)HSW10088|(% colspan="2" style="width:506px" %)(((
	1328	+* Unit: ms.
	1329	+* Range: 0 to 30000
	1330	+)))
	1331	+|(% style="width:173px" %)receive timeout|(% style="width:122px" %)HSW10089|(% colspan="2" style="width:506px" %)(((
	1332	+* Unit: ms.
	1333	+* Range: 0 to 30000
	1334	+)))
	1335	+|(% style="width:173px" %)Retry time|(% style="width:122px" %)HSW10090|(% colspan="2" style="width:506px" %)(((
	1336	+* Unit: times.
	1337	+* Range: 0 to 100
	1338	+)))
	1339	+|(% style="width:173px" %)Retry timeout|(% style="width:122px" %)HSW10091|(% colspan="2" style="width:506px" %)(((
	1340	+* Unit: s.
	1341	+* Range: 0 to 30
	1342	+)))
986	986	|(% style="width:173px" %)HMI station number|(% style="width:122px" %)HSW10092|(% colspan="2" style="width:506px" %)
987	987	|(% style="width:173px" %)PLC station number|(% style="width:122px" %)HSW10093|(% colspan="2" style="width:506px" %)
988	988	|(% colspan="1" rowspan="2" style="width:102px" %)CAN port|(% style="width:173px" %)CAN1 baud rate|(% style="width:122px" %)HSW010116|(% style="width:299px" %)(((
989		-Unit: K, the baud rate must be an integer, for example, when the baud rate required is 250000, just enter 250.
	1346	+Unit: K, the baud rate must be an integer.
	1347	+
	1348	+For example, when the baud rate required is 250000, just enter 250.
990	990	)))|(% colspan="1" rowspan="2" style="width:218px" %)**✎Note: **If baud rate has been modified,please wait 5 seconds,then restart the HMI to take effect.
991		-|(% style="width:173px" %)CAN2 baud rate|(% style="width:122px" %)HSW010117|(% style="width:299px" %)Unit: K, the baud rate must be an integer, for example, when the baud rate required is 250000, just enter 250.
	1350	+|(% style="width:173px" %)CAN2 baud rate|(% style="width:122px" %)HSW010117|(% style="width:299px" %)(((
	1351	+Unit: K, the baud rate must be an integer.
992	992
993		-== **Ethernet communication configuration** ==
	1353	+For example, when the baud rate required is 250000, just enter 250.
	1354	+)))
994	994
	1356	+== Ethernet communication configuration ==
	1357	+
995	995	(% class="table-bordered" %)
996		-|=(% style="width: 40px;" %)**No.**|=(% style="width: 295px;" %)**Function**|=(% style="width: 220px;" %)**Address**|=(% style="width: 336px;" %)**Description**
	1359	+|(% style="width:40px" %)**No.**|(% style="width:295px" %)**Function**|(% style="width:220px" %)**Address**|(% style="width:336px" %)**Description**
997	997	|(% rowspan="7" style="width:40px" %)1|(% colspan="1" rowspan="7" style="width:295px" %)Ethernet parameter configuration for communication number 1 in list. Configure those addresses according to connected device. After configuration, wait for 5 seconds and restart the HMI.|(% style="width:220px" %)HSW11004|(% style="width:336px" %)Device IP address high word 1
998	998	|(% style="width:220px" %)HSW11005|(% style="width:336px" %)Device IP address high word 2
999	999	|(% style="width:220px" %)HSW11006|(% style="width:336px" %)Device IP address high word 3
1000	1000	|(% style="width:220px" %)HSW11007|(% style="width:336px" %)Device IP address high word 4
1001	1001	|(% style="width:220px" %)HSW11008|(% style="width:336px" %)Device Port number
1002		-|(% style="width:220px" %)HSW11009|=(% style="width: 336px;" %)(((
1003		-* =2 TCP
1004		-* =3 UDP
	1365	+|(% style="width:220px" %)HSW11009|(% style="width:336px" %)(((
	1366	+~=2 TCP
	1367	+
	1368	+~=3 UDP
1005	1005	)))
1006	1006	|(% style="width:220px" %)HSW11010|(% style="width:336px" %)Reserved
1007	1007	|(% rowspan="7" style="width:40px" %)2|(% colspan="1" rowspan="7" style="width:295px" %)Ethernet parameter configuration for communication number 2 in list. Configure those addresses according to connected device. After configuration, wait for 5 seconds and restart the HMI.|(% style="width:220px" %)HSW11011|(% style="width:336px" %)Device IP address high word 1
...	...	@@ -1009,9 +1009,10 @@
1009	1009	|(% style="width:220px" %)HSW11013|(% style="width:336px" %)Device IP address high word 3
1010	1010	|(% style="width:220px" %)HSW11014|(% style="width:336px" %)Device IP address high word 4
1011	1011	|(% style="width:220px" %)HSW11015|(% style="width:336px" %)Device Port number
1012		-|(% style="width:220px" %)HSW11016|=(% style="width: 336px;" %)(((
1013		-* =2 TCP
1014		-* =3 UDP
	1376	+|(% style="width:220px" %)HSW11016|(% style="width:336px" %)(((
	1377	+~=2 TCP
	1378	+
	1379	+~=3 UDP
1015	1015	)))
1016	1016	|(% style="width:220px" %)HSW11017|(% style="width:336px" %)Reserved
1017	1017	|(% style="width:40px" %)…|(% style="width:295px" %) |(% style="width:220px" %)…|(% style="width:336px" %)…
...	...	@@ -1020,7 +1020,11 @@
1020	1020	|(% style="width:220px" %)HSW11223|(% style="width:336px" %)Device IP address high word 3
1021	1021	|(% style="width:220px" %)HSW11224|(% style="width:336px" %)Device IP address high word 4
1022	1022	|(% style="width:220px" %)HSW11225|(% style="width:336px" %)Device Port number
1023		-|(% style="width:220px" %)HSW11226|=(% style="width: 336px;" %)2 TCP; =3 UDP
	1388	+|(% style="width:220px" %)HSW11226|(% style="width:336px" %)(((
	1389	+~=2 TCP;
	1390	+
	1391	+~=3 UDP
	1392	+)))
1024	1024	|(% style="width:220px" %)HSW11227|(% style="width:336px" %)Reserved
1025	1025
1026	1026	(% class="box infomessage" %)
...	...	@@ -1028,7 +1028,7 @@
1028	1028	**✎Note:** The number of Ethernet connections supported by different HMI series varies.
1029	1029	)))
1030	1030
1031		-== **Communication control** ==
	1400	+== Communication control ==
1032	1032
1033	1033	(% class="table-bordered" %)
1034	1034	|=(% style="width: 135px;" %)**Communication No.**|=(% style="width: 102px;" %)**Station No.**|=(% style="width: 185px;" %)**Control bit**|=(% style="width: 191px;" %)**Communication lamp**|=(% style="width: 271px;" %)**Description**