Changes for page 13 HMI Internal Registers

Summary

• Page properties (2 modified, 0 added, 0 removed)

Details

Page properties

Author

...	...	@@ -1,1 +1,1 @@
1		-XWiki.Stone
	1	+XWiki.Hunter

Content

...	...	@@ -4,11 +4,11 @@
4	4
5	5	*HSW, HDW, HUW, HAW are word address, HSX, HDX, HUX, HAX are bit address.
6	6
7		-1. **System data area (HSW): **A special register defined by the system.
8		-1. **Data storage area (HDW/HDX): **Users store user data.
9		-1. **System data area (HUW): **A special register defined by the system.
10		-1. **System Data (HAW)**: System register used for power-off save.
11		-1. **Recipe index area (RPW): **System register used for recipe index.
	7	+* **System data area (HSW): **A special register defined by the system.
	8	+* **Data storage area (HDW/HDX): **Users store user data.
	9	+* **System data area (HUW): **A special register defined by the system.
	10	+* **System Data (HAW)**: System register used for power-off save.
	11	+* **Recipe index area (RPW): **System register used for recipe index.
12	12
13	13	HMI internal registers are divided into bit address and word address, which can be accessed in two ways (take HDW as an example).
14	14
...	...	@@ -241,8 +241,8 @@
241	241	* =2: HSX521.1=1, delete all trend graph.
242	242	* =4: HSX521.2=1, delete all alarms.
243	243	* =16: HSX521.4=1, delete history XY plot.
244		-* =32: HSX521.5=1, delete data records in SD card or flash dish;(Please make a setting which is saved to flash disk or SD card in project setting).
245		-* =64: HSX521.6=1, delete alarms records in SD card or flash dish; (Please make a setting which is saved to flash disk or SD card in project setting).
	244	+* =32: HSX521.5=1, delete data records in SD card or USB flash disk;(Please make a setting which is saved to USB flash disk or SD card in project setting).
	245	+* =64: HSX521.6=1, delete alarms records in SD card or USB flash disk; (Please make a setting which is saved to USB flash disk or SD card in project setting).
246	246	)))
247	247	|=(% style="width: 160px;" %)HSW522|(% style="width:282px" %)Copy and paste the alarm/data files in flash to the USB flash disk|(% style="width:452px" %)(((
248	248	* =0: No operation
...	...	@@ -485,6 +485,8 @@
485	485	* =0, Default value
486	486	* =1, Release the alarm generated before the last power-down when starting up
487	487	)))
	488	+|=(% style="width: 160px;" %)HSW1200|(% colspan="1" rowspan="2" style="width:282px" %)TSAP settings for HMI in the Siemens LOGO! 8 protocol(ig series or HMI V2.0)|(% style="width:452px" %)HMI local TSAP, which corresponds to the remote TSAP of PLC
	489	+|=(% style="width: 160px;" %)HSW1201|(% style="width:452px" %)HMI remote TSAP, which corresponds to the local TSAP of PLC
488	488	|=(% style="width: 160px;" %)HSW1450|(% style="width:282px" %)Enable objects level password function|(% style="width:452px" %)(((
489	489	* =0, Disable
490	490	* =1, Enable
...	...	@@ -591,6 +591,9 @@
591	591	* =0: Server connection exception
592	592	* =1: Server connection is OK
593	593	)))
	596	+|=(% style="width: 160px;" %)HSW1740|(% style="width:282px" %)Wi-fi signal signal strength|(% style="width:452px" %)(((
	597	+Display the value of Wi-fi signal signal strength, ranges from 0~~100 (Signal strength is automatically obtained only once when HMI is powered on, and it will not be automatically updated. It needs to be used with the HSW1890)
	598	+)))
594	594	|=(% style="width: 160px;" %)HSW1741|(% colspan="1" rowspan="12" style="width:282px" %)Related IP register in 4Gnetwork status (It is valid when HMI is connected to 4G)|(% style="width:452px" %)Local IP address high byte 1
595	595	|=(% style="width: 160px;" %)HSW1742|(% style="width:452px" %)Local IP address high byte 2
596	596	|=(% style="width: 160px;" %)HSW1743|(% style="width:452px" %)Local IP address high byte 3
...	...	@@ -618,6 +618,174 @@
618	618	* =1: Server connection is OK
619	619	)))
620	620	|=(% style="width: 160px;" %)HSW1761|(% style="width:282px" %)Display 4G network signal strength|(% style="width:452px" %)Signal strength: 0~~31. The greater the value ,the signal is stronger
	626	+|=(% style="width: 160px;" %)(((
	627	+HSW1762
	628	+)))|(% colspan="1" rowspan="13" style="width:282px" %)(((
	629	+Note: Valid when Ethernet2 of HMI is plugged into the network cable.
	630	+①、When the Ethernet setting is enabled in the project parameters, this register displays the set value.
	631	+②. When the Ethernet setting is not enabled in the engineering parameters, the register displays the Ethernet IP automatically acquired by the HMI.
	632	+③. When the HMI is not plugged into the network cable, the register will show 0 whether the engineering parameters are set or not.
	633	+④.IP related registers can be read and written (only static IP mode can be written).
	634	+)))|(% style="width:452px" %)(((
	635	+Ethernet2 Local IP address high byte 1
	636	+)))
	637	+|=(% style="width: 160px;" %)(((
	638	+HSW1763
	639	+)))|(% style="width:452px" %)(((
	640	+Ethernet2 Local IP address high byte 2
	641	+)))
	642	+|=(% style="width: 160px;" %)(((
	643	+HSW1764
	644	+)))|(% style="width:452px" %)(((
	645	+Ethernet2 Local IP address high byte 3
	646	+)))
	647	+|=(% style="width: 160px;" %)(((
	648	+HSW1765
	649	+)))|(% style="width:452px" %)(((
	650	+Ethernet2 Local IP address high byte 4
	651	+)))
	652	+|=(% style="width: 160px;" %)(((
	653	+HSW1766
	654	+)))|(% style="width:452px" %)(((
	655	+Ethernet2 Local mask IP address high byte 1
	656	+)))
	657	+|=(% style="width: 160px;" %)(((
	658	+HSW1767
	659	+)))|(% style="width:452px" %)(((
	660	+Ethernet2 Local mask IP address high byte 2
	661	+)))
	662	+|=(% style="width: 160px;" %)(((
	663	+HSW1768
	664	+)))|(% style="width:452px" %)Ethernet2 Local mask IP address high byte 3
	665	+|=(% style="width: 160px;" %)HSW1769|(% style="width:452px" %)Ethernet2 Local mask IP address high byte 4
	666	+|=(% style="width: 160px;" %)(((
	667	+HSW1770
	668	+)))|(% style="width:452px" %)(((
	669	+Ethernet2 Local gateway IP address high byte 1
	670	+)))
	671	+|=(% style="width: 160px;" %)(((
	672	+HSW1771
	673	+)))|(% style="width:452px" %)(((
	674	+Ethernet2 Local gateway IP address high byte 2
	675	+)))
	676	+|=(% style="width: 160px;" %)(((
	677	+HSW1772
	678	+)))|(% style="width:452px" %)(((
	679	+Ethernet2 Local gateway IP address high byte 3
	680	+)))
	681	+|=(% style="width: 160px;" %)(((
	682	+HSW1773
	683	+)))|(% style="width:452px" %)(((
	684	+Ethernet2 Local gateway IP address high byte 4
	685	+)))
	686	+|=(% style="width: 160px;" %)(((
	687	+HSW1774
	688	+)))|(% style="width:452px" %)(((
	689	+Ethernet2 Local Port Address
	690	+)))
	691	+|=(% style="width: 160px;" %)(((
	692	+HSW1775
	693	+)))|(% colspan="1" rowspan="6" style="width:282px" %)(((
	694	+①Display the MAC code of Ethernet2 NIC
	695	+
	696	+(hexadecimal display)
	697	+
	698	+②Read-only mode, not modifiable
	699	+)))|(% style="width:452px" %)(((
	700	+Ethernet2 Local MAC code high byte 1
	701	+)))
	702	+|=(% style="width: 160px;" %)(((
	703	+HSW1776
	704	+)))|(% style="width:452px" %)(((
	705	+Ethernet2 Local MAC code high byte 2
	706	+)))
	707	+|=(% style="width: 160px;" %)(((
	708	+HSW1777
	709	+)))|(% style="width:452px" %)(((
	710	+Ethernet2 Local MAC code high byte 3
	711	+)))
	712	+|=(% style="width: 160px;" %)(((
	713	+HSW1778
	714	+)))|(% style="width:452px" %)(((
	715	+Ethernet2 Local MAC code high byte 4
	716	+)))
	717	+|=(% style="width: 160px;" %)(((
	718	+HSW1779
	719	+)))|(% style="width:452px" %)(((
	720	+Ethernet2 Local MAC code high byte 5
	721	+)))
	722	+|=(% style="width: 160px;" %)(((
	723	+HSW1780
	724	+)))|(% style="width:452px" %)(((
	725	+Ethernet2 Local MAC code high byte 6
	726	+)))
	727	+|=(% style="width: 160px;" %)(((
	728	+HSW1781
	729	+)))|(% colspan="1" rowspan="8" style="width:282px" %)(((
	730	+①Display and modify DNS1 and DNS2 of Ethernet2
	731	+
	732	+②Related registers can be read and written mode (only static IP mode can be written)
	733	+)))|(% style="width:452px" %)(((
	734	+Ethernet2 Local DNS1 address high byte 1
	735	+)))
	736	+|=(% style="width: 160px;" %)(((
	737	+HSW1782
	738	+)))|(% style="width:452px" %)(((
	739	+Ethernet2 Local DNS1 address high byte 2
	740	+)))
	741	+|=(% style="width: 160px;" %)(((
	742	+HSW1783
	743	+)))|(% style="width:452px" %)(((
	744	+Ethernet2 Local DNS1 address high byte 3
	745	+)))
	746	+|=(% style="width: 160px;" %)(((
	747	+HSW1784
	748	+)))|(% style="width:452px" %)(((
	749	+Ethernet2 Local DNS1 address high byte 4
	750	+)))
	751	+|=(% style="width: 160px;" %)(((
	752	+HSW1785
	753	+)))|(% style="width:452px" %)(((
	754	+Ethernet2 Local DNS2 address high byte 1
	755	+)))
	756	+|=(% style="width: 160px;" %)(((
	757	+HSW1786
	758	+)))|(% style="width:452px" %)(((
	759	+Ethernet2 Local DNS2 address high byte 2
	760	+)))
	761	+|=(% style="width: 160px;" %)(((
	762	+HSW1787
	763	+)))|(% style="width:452px" %)(((
	764	+Ethernet2 Local DNS2 address high byte 3
	765	+)))
	766	+|=(% style="width: 160px;" %)(((
	767	+HSW1788
	768	+)))|(% style="width:452px" %)(((
	769	+Ethernet2 Local DNS2 address high byte 4
	770	+)))
	771	+|=(% style="width: 160px;" %)(((
	772	+HSW1789
	773	+)))|(% colspan="1" style="width:282px" %)(((
	774	+Display or set the dynamic or static IP mode of Ethernet2
	775	+)))|(% style="width:452px" %)(((
	776	+HSX1789.0 = 0, Static IP mode
	777	+
	778	+HSX1789.0 = 1, dynamic IP mode
	779	+)))
	780	+|=(% style="width: 160px;" %)(((
	781	+HSW1790
	782	+)))|(% colspan="1" style="width:282px" %)(((
	783	+Confirm Ethernet2 IP, subnet mask, gateway, DNS1, DNS2, and dynamic static IP settings
	784	+)))|(% style="width:452px" %)(((
	785	+~= 1, confirm the setting (i.e., after modifying IP-related information, set this address to 1, representing confirmation of the modification, after which it will be reset to 0)
	786	+)))
	787	+|=(% style="width: 160px;" %)(((
	788	+HSW1791
	789	+)))|(% colspan="1" style="width:282px" %)(((
	790	+Network status of the Ethernet2 connection server
	791	+)))|(% style="width:452px" %)(((
	792	+~= 0, connection to the server is abnormal = 1, connection to the server is normal
	793	+)))
621	621	|=(% style="width: 160px;" %)HSW1852|(% style="width:282px" %)Control the interval in two consecutive clicks|(% style="width:452px" %)Limit range: 1~~500ms. The default is 100 ms.
622	622	|=(% style="width: 160px;" %)HSW1853|(% style="width:282px" %)File format for exporting data records to USB flash drive or SD card|(% style="width:452px" %)(((
623	623	* =0: db database
...	...	@@ -643,30 +643,87 @@
643	643	* =1: download firmware
644	644	* =2: enter the background
645	645	)))
	819	+|=(% style="width: 160px;" %)HSW1865|(% style="width:282px" %)Priority connection to the cloud|(% style="width:452px" %)(((
	820	+* =0: priority Ethernet
	821	+* =1: priority WLAN
	822	+* =2: priority 4G
	823	+)))
646	646	|=(% style="width: 160px;" %)HSW1866|(% style="width:282px" %)Delete the LUa extension module file|(% style="width:452px" %)(((
647		-* =1, delete;
648		-* = Others, do not delete
	825	+* =0: delete;
	826	+* = Others: do not delete
649	649	)))
650	650	|=(% style="width: 160px;" %)HSW1867|(% style="width:282px" %)Reset mode|(% style="width:452px" %)(((
651	651	Monitor address is set during reset of reset switch, whether to cancel reset,
652	652
653		-* = 0, yes (default);
654		-* = 1, no
	831	+* = 0: yes (default);
	832	+* = 1: no
655	655	)))
656	656	|=(% style="width: 160px;" %)HSW1868|(% style="width:282px" %)Double-click or long press the record type table mode|(% style="width:452px" %)(((
657	657	Controls whether the button pops up when double-clicking or long pressing on record type table object
658	658
659		-* = 0, yes (default);
660		-* = 1, no
	837	+* = 0: yes (default);
	838	+* = 1: no
661	661	)))
	840	+|=(% style="width: 160px;" %)(((
	841	+HSW1869
	842	+)))|(% style="width:282px" %)(((
	843	+Dynamic screensaver countdown
	844	+)))|(% style="width:452px" %)(((
	845	+Countdown to enter dynamic screensaver effect, unit (S)
	846	+)))
	847	+|=(% style="width: 160px;" %)(((
	848	+HSW1870
	849	+)))|(% style="width:282px" %)(((
	850	+Display or set the dynamic or static IP mode of Ethernet1
	851	+)))|(% style="width:452px" %)(((
	852	+HSX1870.0 = 0, Static IP mode
	853	+
	854	+HSX1870.0 = 1, dynamic IP mode
	855	+)))
	856	+|=(% style="width: 160px;" %)(((
	857	+HSW1871
	858	+)))|(% style="width:282px" %)(((
	859	+Confirm the IP, subnet mask, gateway, DNS1, DNS2, and dynamic static IP settings for Ethernet1
	860	+)))|(% style="width:452px" %)(((
	861	+~= 1, confirm the setting (i.e., after modifying IP-related information, set this address to 1, representing confirmation of the modification, after which it will be reset to 0)
	862	+)))
	863	+|=(% style="width: 160px;" %)(((
	864	+HSW1872
	865	+)))|(% colspan="1" rowspan="8" style="width:282px" %)(((
	866	+①Display and modify DNS1 and DNS2 of Ethernet1
	867	+
	868	+②Related registers can be read and written mode (only static IP mode can be written)
	869	+)))|(% style="width:452px" %)(((
	870	+Ethernet1 Local DNS1 address high byte 1
	871	+)))
	872	+|=(% style="width: 160px;" %)(((
	873	+HSW1873
	874	+)))|(% style="width:452px" %)Ethernet1 Local DNS1 address high byte 2
	875	+|=(% style="width: 160px;" %)(((
	876	+HSW1874
	877	+)))|(% style="width:452px" %)Ethernet1 Local DNS1 address high byte 3
	878	+|=(% style="width: 160px;" %)(((
	879	+HSW1875
	880	+)))|(% style="width:452px" %)Ethernet1 Local DNS1 address high byte 4
	881	+|=(% style="width: 160px;" %)(((
	882	+HSW1876
	883	+)))|(% style="width:452px" %)Ethernet1 Local DNS2 address high byte 1
	884	+|=(% style="width: 160px;" %)(((
	885	+HSW1877
	886	+)))|(% style="width:452px" %)Ethernet1 Local DNS2 address high byte 2
	887	+|=(% style="width: 160px;" %)(((
	888	+HSW1878
	889	+)))|(% style="width:452px" %)Ethernet1 Local DNS2 address high byte 3
	890	+|=(% style="width: 160px;" %)(((
	891	+HSW1879
	892	+)))|(% style="width:452px" %)Ethernet1 Local DNS2 address high byte 4
662	662	|=(% style="width: 160px;" %)HSW10000~~19999|(% style="width:282px" %)Power-down storage area|(% style="width:452px" %)After restart, the data remains
663	663	|=(% style="width: 160px;" %)HSW10035|(% rowspan="13" style="width:282px" %)(((
664		-**✎Note: **Only valid when the HMI is plugged into the Ethernet cable.
665		-
666		-1. If Ethernet settings is enabled in project parameters, this register displays the set value.
667		-1. If Ethernet settings is not enabled in project parameters, IP would automatically obtained IP.
668		-1. If HMI is not connected to the network, the register is displayed as 0 whether the engineering parameters are set.
669		-1. 4. All IP registers of HMI are read-only.
	895	+Note: Valid when Ethernet1 of HMI is plugged into the network cable.
	896	+①、When the Ethernet setting is enabled in the project parameters, this register displays the set value.
	897	+②. When the Ethernet setting is not enabled in the engineering parameters, the register displays the Ethernet IP automatically acquired by the HMI.
	898	+③. When the HMI is not plugged into the network cable, the register will show 0 whether the engineering parameters are set or not.
	899	+④.IP related registers can be read and written (only static IP mode can be written).
670	670	)))|(% style="width:452px" %)Local IP address high byte 1
671	671	|=(% style="width: 160px;" %)HSW10036|(% style="width:452px" %)Local IP address high byte 2
672	672	|=(% style="width: 160px;" %)HSW10037|(% style="width:452px" %)Local IP address high byte 3
...	...	@@ -681,9 +681,11 @@
681	681	|=(% style="width: 160px;" %)HSW10046|(% style="width:452px" %)Local gateway address high byte 4
682	682	|=(% style="width: 160px;" %)HSW10047|(% style="width:452px" %)Local port address
683	683	|=(% style="width: 160px;" %)HSW10048|(% rowspan="6" style="width:282px" %)(((
684		-Displays the MAC code of the current network card
	914	+①Display the MAC code of Ethernet1 NIC
685	685
686		-(Hexadecimal display)
	916	+(hexadecimal display)
	917	+
	918	+②Read-only mode, not modifiable
687	687	)))|(% style="width:452px" %)Local MAC code high word 1
688	688	|=(% style="width: 160px;" %)HSW10049|(% style="width:452px" %)Local MAC code high word 2
689	689	|=(% style="width: 160px;" %)HSW10050|(% style="width:452px" %)Local MAC code high word 3
...	...	@@ -690,7 +690,7 @@
690	690	|=(% style="width: 160px;" %)HSW10051|(% style="width:452px" %)Local MAC code high word 4
691	691	|=(% style="width: 160px;" %)HSW10052|(% style="width:452px" %)Local MAC code high word 5
692	692	|=(% style="width: 160px;" %)HSW10053|(% style="width:452px" %)Local MAC code high word 6
693		-|=(% style="width: 160px;" %)HSW10118|(% colspan="1" rowspan="2" style="width:282px" %)TSAP settings for HMI in the Siemens logo! 8 protocol|(% style="width:452px" %)HMI local TSAP, which corresponds to the remote TSAP of PLC
	925	+|=(% style="width: 160px;" %)HSW10118|(% colspan="1" rowspan="2" style="width:282px" %)TSAP settings for HMI in the Siemens LOGO! 8 protocol|(% style="width:452px" %)HMI local TSAP, which corresponds to the remote TSAP of PLC
694	694	|=(% style="width: 160px;" %)HSW10119|(% style="width:452px" %)HMI remote TSAP, which corresponds to the local TSAP of PLC
695	695	|=(% style="width: 160px;" %)HSW10461~~10493|(% style="width:282px" %)Remote access password|(% style="width:452px" %)8-character remote access password
696	696	|=(% style="width: 160px;" %)HSW10494~~10558|(% style="width:282px" %)Machine ID (Read only)|(% style="width:452px" %)Machine ID for remote access (read only 64-bit)
...	...	@@ -772,9 +772,36 @@
772	772	)))
773	773	|=(% style="width: 160px;" %)HSW11760|(% style="width:282px" %)Screensaver countdown|(% style="width:452px" %)Display the countdown to enter the Screensaver, unit: second.
774	774	|=(% style="width: 160px;" %)HSW11761|(% style="width:282px" %)Screensaver screen number|(% style="width:452px" %)Set the screen number for Screensaver
	1007	+|=(% style="width: 160px;" %)(((
	1008	+HSW11762
	1009	+)))|(% style="width:282px" %)(((
	1010	+Dynamic screensaver control address
	1011	+)))|(% style="width:452px" %)(((
	1012	+HSX11762.0=0, initialize with project configuration;
775	775
776		-== **Serial port communication configuration** ==
	1014	+HSX11762.0=1, initialize with special register configuration;
777	777
	1016	+HSX11762.1=0, disable dynamic screensaver;
	1017	+
	1018	+HSX11762.1=1, enable dynamic screensaver
	1019	+)))
	1020	+|=(% style="width: 160px;" %)(((
	1021	+HSW11763
	1022	+)))|(% style="width:282px" %)(((
	1023	+Waiting time to enter the dynamic screensaver
	1024	+)))|(% style="width:452px" %)(((
	1025	+Waiting time when the screen is not operated, range 1~~720 minutes
	1026	+)))
	1027	+|=(% style="width: 160px;" %)(((
	1028	+HSW11764
	1029	+)))|(% style="width:282px" %)(((
	1030	+Animated screensaver animation type
	1031	+)))|(% style="width:452px" %)(((
	1032	+~=0: Raster,=1: Blinds,=2: Bubble
	1033	+)))
	1034	+
	1035	+== Serial port communication configuration ==
	1036	+
778	778	(% class="table-bordered" %)
779	779	|=(% scope="row" style="width: 102px;" %)Port|=(% style="width: 173px;" %)**Function**|=(% style="width: 122px;" %)**Address**|=(% colspan="2" style="width: 506px;" %)**Description**
780	780	|(% colspan="1" rowspan="11" style="width:102px" %)COM1|(% style="width:173px" %)Communication mode|(% style="width:122px" %)HSW10061|(% colspan="2" style="width:506px" %)(((
...	...	@@ -1068,18 +1068,19 @@
1068	1068	For example, when the baud rate required is 250000, just enter 250.
1069	1069	)))
1070	1070
1071		-== **Ethernet communication configuration** ==
	1330	+== Ethernet communication configuration ==
1072	1072
1073	1073	(% class="table-bordered" %)
1074		-|=(% style="width: 40px;" %)**No.**|=(% style="width: 295px;" %)**Function**|=(% style="width: 220px;" %)**Address**|=(% style="width: 336px;" %)**Description**
	1333	+|(% style="width:40px" %)**No.**|(% style="width:295px" %)**Function**|(% style="width:220px" %)**Address**|(% style="width:336px" %)**Description**
1075	1075	|(% rowspan="7" style="width:40px" %)1|(% colspan="1" rowspan="7" style="width:295px" %)Ethernet parameter configuration for communication number 1 in list. Configure those addresses according to connected device. After configuration, wait for 5 seconds and restart the HMI.|(% style="width:220px" %)HSW11004|(% style="width:336px" %)Device IP address high word 1
1076	1076	|(% style="width:220px" %)HSW11005|(% style="width:336px" %)Device IP address high word 2
1077	1077	|(% style="width:220px" %)HSW11006|(% style="width:336px" %)Device IP address high word 3
1078	1078	|(% style="width:220px" %)HSW11007|(% style="width:336px" %)Device IP address high word 4
1079	1079	|(% style="width:220px" %)HSW11008|(% style="width:336px" %)Device Port number
1080		-|(% style="width:220px" %)HSW11009|=(% style="width: 336px;" %)(((
1081		-* =2 TCP
1082		-* =3 UDP
	1339	+|(% style="width:220px" %)HSW11009|(% style="width:336px" %)(((
	1340	+~=2 TCP
	1341	+
	1342	+~=3 UDP
1083	1083	)))
1084	1084	|(% style="width:220px" %)HSW11010|(% style="width:336px" %)Reserved
1085	1085	|(% rowspan="7" style="width:40px" %)2|(% colspan="1" rowspan="7" style="width:295px" %)Ethernet parameter configuration for communication number 2 in list. Configure those addresses according to connected device. After configuration, wait for 5 seconds and restart the HMI.|(% style="width:220px" %)HSW11011|(% style="width:336px" %)Device IP address high word 1
...	...	@@ -1087,9 +1087,10 @@
1087	1087	|(% style="width:220px" %)HSW11013|(% style="width:336px" %)Device IP address high word 3
1088	1088	|(% style="width:220px" %)HSW11014|(% style="width:336px" %)Device IP address high word 4
1089	1089	|(% style="width:220px" %)HSW11015|(% style="width:336px" %)Device Port number
1090		-|(% style="width:220px" %)HSW11016|=(% style="width: 336px;" %)(((
1091		-* =2 TCP
1092		-* =3 UDP
	1350	+|(% style="width:220px" %)HSW11016|(% style="width:336px" %)(((
	1351	+~=2 TCP
	1352	+
	1353	+~=3 UDP
1093	1093	)))
1094	1094	|(% style="width:220px" %)HSW11017|(% style="width:336px" %)Reserved
1095	1095	|(% style="width:40px" %)…|(% style="width:295px" %) |(% style="width:220px" %)…|(% style="width:336px" %)…
...	...	@@ -1098,7 +1098,11 @@
1098	1098	|(% style="width:220px" %)HSW11223|(% style="width:336px" %)Device IP address high word 3
1099	1099	|(% style="width:220px" %)HSW11224|(% style="width:336px" %)Device IP address high word 4
1100	1100	|(% style="width:220px" %)HSW11225|(% style="width:336px" %)Device Port number
1101		-|(% style="width:220px" %)HSW11226|=(% style="width: 336px;" %)2 TCP; =3 UDP
	1362	+|(% style="width:220px" %)HSW11226|(% style="width:336px" %)(((
	1363	+~=2 TCP;
	1364	+
	1365	+~=3 UDP
	1366	+)))
1102	1102	|(% style="width:220px" %)HSW11227|(% style="width:336px" %)Reserved
1103	1103
1104	1104	(% class="box infomessage" %)
...	...	@@ -1106,7 +1106,7 @@
1106	1106	**✎Note:** The number of Ethernet connections supported by different HMI series varies.
1107	1107	)))
1108	1108
1109		-== **Communication control** ==
	1374	+== Communication control ==
1110	1110
1111	1111	(% class="table-bordered" %)
1112	1112	|=(% style="width: 135px;" %)**Communication No.**|=(% style="width: 102px;" %)**Station No.**|=(% style="width: 185px;" %)**Control bit**|=(% style="width: 191px;" %)**Communication lamp**|=(% style="width: 271px;" %)**Description**