Changes for page 13 HMI Internal Registers

Last modified by xingzhi lin on 2025/10/30 15:10

From 5.2 to 5.1 From 7.1 to 6.5

From version 6.5

edited by xingzhi lin
on 2025/10/30 15:10

Change comment: There is no comment for this version

To version 5.2

edited by xingzhi lin
on 2025/09/24 10:21

Change comment: There is no comment for this version

Raw
Rendered

Summary

Page properties (1 modified, 0 added, 0 removed)

Details

Page properties

Content

@@ -134,87 +134,7 @@
  * 0: Not touching
  * 1: Touching
  )))
--|=HUW1503|The current user's group prompt|(((
--A bit represents one of the groups. The administrator is bit 0, group 0 is bit 1, and group 1 is bit 2 and so on.
--For example:
--
--* HUW1503.0=0 (administrator)
--* HUW1503.1=1 (group 0)
--* HUW1503.2=1 (group 1)
--* HUW1503.3=0 (group 2)
--
--This means the current user has the permissions of groups 0 and 1, but not administrator or group 2.
--)))
--|=HSW1908|Total available user storage|Displays total available user storage (64-bit floating-point, unit: MB).
--|=HSW1912|Remaining available user storage|Displays remaining available user storage (64-bit floating-point, unit: MB).
--|=HSW1921|Touch status indicator|(((
--* 0: Not touching
--* 1: Touching
--)))
--|=HSW1923|Exclusive mode switch|(((
--* 0: Disable exclusive mode
--* 1: Enable exclusive mode
--)))
--|=HSW11773|Control auto user logout |(((
--Controls the enable state of auto user logout.
--
--* HSX11773.0: =0 Follow project configuration
--* HSX11773.0: =1 Follow address configuration
--* HSX11773.1: =0 Disable auto logout
--* HSX11773.1: =1 Enable auto logout
--)))
--|=HSW11774|Auto user logout waiting time|Sets the waiting time before automatic logout (1–255 minutes).
--|=(((
--==== **HSW11775** ====
--)))|Enable NTP time synchronization|(((
--* 1: Enable NTP
--* 0: Disable NTP
--)))
--|=HSW11776|Immediate time synchronization|Perform immediate NTP sync after device startup.
--|=HSW11777~~11780|Primary time server IP (required when NTP is enabled)|Each register represents one byte of the IP address (high to low).
--|=HSW11781~~11784|Second time server IP (optional)|Each register represents one byte of the IP address (high to low).
--|=HSW11785~~11788|Third time server IP (optional)|Each register represents one byte of the IP address (high to low).
--|=HSW11789~~11792|Fourth time server IP (optional)|Each register represents one byte of the IP address (high to low).
--|=HSW11793|Time synchronization period|(((
--
--
--High byte of time synchronization period
--)))
--|=HSW11794|Time synchronization period|(((
--
--
--Low byte of time synchronization period
--)))
--|=HSW11795|Enable daylight saving time (DST)|(((
--* 1: Enable DST
--* 0: Disable DST
--)))
--|=HSW11796|Time adjustment|Hour adjustment
--|=HSW11797|Time adjustment|Minute adjustment
--|=HSW11798~~11807|DST start and end configuration|(((
--* Start month: 1–12
--* Week of month: 1–5
--* Day of week: 0–6 (0 = Sunday)
--* Hour: 0–23
--* Minute: 0–59
--* End month/week/day/hour/minute follow the same format.
--)))
--|=HSW11808|Whether currently in daylight saving time|(((
--* 1: In DST
--* 0: Not in DST
--)))
--|=HSW11811|Watchdog mode configuration|(((
--* 1: Register mode
--* 0: Project mode
--)))
--|=HSW11812|Enable watchdog|(((
--* 1: Enable
--* 0: Disable
--)))
--|=HSW11813|Watchdog timeout setting|Unit: second
--|=HSW11814|Trigger watchdog|=0 Reboot
--
  = **Special data area (HSW/HSX)** =
  It is used for system special registers (reserved by system).

Changes for page 13 HMI Internal Registers

Summary

Details

Navigation

Table of Contents