Skip to Content

Wiki source code of 12 HMI internal registers

Version 12.1 by Bob on 2023/01/07 14:26
Show last authors
1 = **Introduction** =
2
3 HMI provide four types of HMI address for user. You can use them as temporary variables of the program. The use is consistent with the way access to the PLC register. You could also reference through the address, PIStudio provides three types of such memory.
4
5 *HSW, HDW, HUW, HAW are word address, HSX, HDX, HUX, HAX are bit address.
6
7 * **System data area (HSW): **A special register defined by the system.
8 * **Data storage area (HDW/HDX): **Users store user data.
9 * **System data area (HUW): **A special register defined by the system.
10 * **System Data (HAW)**: System register used for power-off save.
11 * **Recipe index area (RPW): **System register used for recipe index.
12
13 HMI internal registers are divided into bit address and word address, which can be accessed in two ways (take HDW as an example).
14
15 * Access as word with the prefix "HDW".
16 ** HDW0 means the 1st word of system data area. HDW1 means the 2nd word of system data area.
17 * Access as bit with the prefix "HDX".  The number before "." i".  The number before Access in bit with the prefix "HD".  The number before Access in bit with the prefix "HDX". The number before "." indicates the number of the word. The number after "." indicates the bit number of the word.
18 ** HDX1020.12 means to access the system data area in bit mode, the specific location is the 13th bit of the 1020 word.
19
20 (% class="box infomessage" %)
21 (((
22 **✎Note:**
23
24 * Addresses in HDX are the bits from words in HDW, so be careful when using addresses. For example, HDX1020.12 is the 13th bit to access the 1020 word. The value of this bit is the same as that of the word accessed through HDW001020. The 13th bit of this word is actually the same bit as HDX1020.12.
25 * The address of the bit address HDX is with a decimal point while word addresses are integers.
26 )))
27
28 = **Data storage area (HDW/HDX)** =
29
30 It is used to save the temporary data of project.
31
32 1. Access as word, and serial number range is from HDW0 to HDW299999.
33 1. Access as bit, and serial number range is from HDX0.0 to HDX299999.15.
34
35 = **Power-down save area (HAW/HAX)** =
36
37 It is system registers used for power-off save.
38
39 1. Access as word, and serial number range is from HAW0 to HAW199999.
40 1. Access as bit, and serial number range is from HAX0.0 to HAX199999.15.
41
42 (% class="box infomessage" %)
43 (((
44 **✎Note:**
45
46 * HAW/HAX is power-down retention. The register of this type is able to save the data before the power-down.
47 * To avoid possible device failure, do not immediately power off and reboot when configuring the power-down save addre
48 )))
49
50 = **Recipe index area (RPW)** =
51
52 It is system recipe data power-off save register. The range is from RPW000000 to RPW990450.
53
54 **✎Note:**
55
56 * RPW is power-down retention. The register of this type is able to save the data before the power-down.
57 * To avoid possible device failure, do not immediately power off and reboot when configuring the power-down save addre
58
59 = **Single user data area (HUW/HUX)** =
60
61 It is used for system special registers (reserved by system).
62
63 1. Access as word, and serial number range is from HUW0 to HUW199999.
64 1. Access as bit, and serial number range is from HUX0.0 to HUX199999.15.
65
66 **✎Note:**
67
68 * HUW/HUX is a system special register, so please check the system special register list during use. Please use the address specified in the table and do not use the address which is not mentioned in the table.
69
70 (% class="table-bordered" %)
71 |=**Special register address**|=**Description**|=**Function**
72 |=HUW0|Screen switch|A single terminal controls the screen switching, and all terminals do not affect each other.
73 |=HUW110~~HUW119|(% rowspan="26" %)Addresses of the built-in keyboard|The T9 input method stores the selected seria number length
74 |=HUW120~~HUW129|The T9 input method stores the selected Chinese Pinyin length
75 |=HUW135|Input method: first input
76 |=HUW136|Button: T9 Chinese Pinyin page
77 |=HUW137|Button: T9 Chinese characters page
78 |=HUW138|Button: symbol
79 |=HUW139|Button: switch
80 |=HUW140|Button: Chinese characters 1
81 |=HUW142|Button: Chinese characters 2
82 |=HUW144|Button: Chinese characters 3
83 |=HUW146|Button: Chinese characters 4
84 |=HUW148|Button: Chinese characters 5
85 |=HUW150|Button: Chinese characters 6
86 |=HUW152|Button: Chinese characters 7
87 |=HUW154|Button: Chinese characters 8
88 |=HUW156|Button: Chinese characters 9
89 |=HUW158|Button: Chinese characters 10
90 |=HUW160~~HUW169|Button: Chinese Pinyin 1
91 |=HUW170~~HUW179|Button: Chinese Pinyin 2
92 |=HUW180~~HUW189|Button: Chinese Pinyin 3
93 |=HUW190~~HUW199|Button: Chinese Pinyin 4
94 |=HUW200~~HUW699|Input method cache length
95 |=HUW700~~HUW749|Minimum value of the input method
96 |=HUW750~~HUW799|Maximum value of the input method
97 |=HUW800|Case switching of the input method
98 |=HUW801~~HUW900|Input method format cache length
99 |=HUW1000|(% rowspan="12" %)Addresses of user permission|OK (Sign in)
100 |=HUW1001|Result of operation
101 |=HUW1002~~1005|Old password
102 |=HUW1006~~1009|New password
103 |=HUW1010~~1013|Confirm password
104 |=HUW1014~~1029|New user name
105 |=HUW1030~~1157|States information of user permission
106 |=HUW1158~~1335|User name (Only or drop-down list object)
107 |=HUW1336~~1345|User name description or note
108 |=HUW1347|Hidden function configurations
109 |=HUW1348|Permission settings
110 |=HUW1349|Current user name
111 |=HUW1382|User sign in way|(((
112 * 0: Select the user name from drop-down list object for signing in
113 * 1: Enter the user name in Character Input/Display object for signing in (HUW1014)
114 )))
115 |=HUW1400|Time interval from last operation|(((
116 Shows how long the touch screen has not been clicked, in seconds. 32-bit unsigned integer
117
118 **✎Note:** Clicking by different users will only clear the corresponding register of the currently operating terminal, and the registers on other terminals (such as mobile phones, computers) will not be cleared.
119 )))
120 |=HUW1402|Keyboard note|It saves the text information of the keyboard notes when clicking object(HUW1402-HUW1433)
121 |=HUW1436|Current object level|Indicate current object security level
122
123 = **Special data area (HSW/HSX)** =
124
125 It is used for system special registers (reserved by system).
126
127 1. Access as word, and serial number range is from HSW0 to HSW49999. (HSW10000 to HSW19999 are the power-off storage areas)
128 1. Access as bit, and serial number range is from HSX0.0 to HSX49999.15.
129
130 **✎Note:**
131
132 * HSW / HSX are a system special register, so please check the system special register list during use. Please use the address specified in the table and do not use the address which is not mentioned in the table.
133 * To avoid possible device failure, do not immediately power off and reboot when configuring the power-down save address.
134
135 (% class="table-bordered" style="width:1024px" %)
136 |=(% scope="row" style="width: 160px;" %)**Address**|=(% style="width: 282px;" %)**Function**|=(% style="width: 452px;" %)**Description**
137 |=(% style="width: 160px;" %)HSW0|(% style="width:282px" %)Language switch|(% style="width:452px" %)Multiple language could be set in the project, HMI support maximum 8 languages. (Power-down save supported)
138 |=(% style="width: 160px;" %)HSW1|(% style="width:282px" %)Beep frequency|(% style="width:452px" %)Frequency range: 0~~4000
139 |=(% style="width: 160px;" %)HSW2|(% style="width:282px" %)Beep volume|(% style="width:452px" %)Volume range: 0~~80
140 |=(% style="width: 160px;" %)HSW3|(% style="width:282px" %)Beep time|(% style="width:452px" %)Unit: ms
141 |=(% style="width: 160px;" %)HSW4|(% style="width:282px" %)Beep whether enable or not|(% style="width:452px" %)(((
142 * =0: Enable.
143 * =1: Disable.
144 )))
145 |=(% style="width: 160px;" %)HSW5|(% style="width:282px" %)(((
146 Alarm indicator
147 )))|(% style="width:452px" %)(((
148 * =0: Currently no alarm or all alarms have been off.
149 * =1: Currently alarm(s) still keep in on.
150 )))
151 |=(% style="width: 160px;" %)HSW6~~HSW7|(% style="width:282px" %)Number of alarms|(% style="width:452px" %)The number of alarm (it also includes the records of alarm confirmed)
152 |=(% style="width: 160px;" %)HSW8|(% style="width:282px" %)Number of unconfirmed history alarm|(% style="width:452px" %)The number of unconfirmed history alarm
153 |=(% style="width: 160px;" %)HSW9|(% style="width:282px" %)Time out tip|(% style="width:452px" %)(((
154 * =0: Enable
155 * =1: Disable
156 )))
157 |=(% style="width: 160px;" %)HSW12|(% style="width:282px" %)Screen swicth|(% style="width:452px" %)(((
158 * = 0: Only HSW control the screen switch, and the sreens of all users will switch.
159 * = 1: Only HUW control the screen switch, and all users do not affect each other.
160 )))
161 |=(% style="width: 160px;" %)HSW13|(% style="width:282px" %)Screen switch register|(% style="width:452px" %)Equal to different values, the screen jumps to the corresponding screen number of the screen.
162 |=(% style="width: 160px;" %)HSW24|(% style="width:282px" %)Reboot HMI|=(% style="width: 452px;" %)1: Reboot
163 |=(% style="width: 160px;" %)HSW28|(% style="width:282px" %)Local time: year|(% style="width:452px" %)Range: 0~~9999 (system reserved)
164 |=(% style="width: 160px;" %)HSW29|(% style="width:282px" %)Local time: month|(% style="width:452px" %)Range: 01~~12 (system reserved)
165 |=(% style="width: 160px;" %)HSW30|(% style="width:282px" %)Local time: day|(% style="width:452px" %)Range: 01~~31 (system reserved)
166 |=(% style="width: 160px;" %)HSW31|(% style="width:282px" %)Local time: hour|(% style="width:452px" %)Range: 0~~23 (system reserved)
167 |=(% style="width: 160px;" %)HSW32|(% style="width:282px" %)Local time: minute|(% style="width:452px" %)Range: 0~~59 (system reserved)
168 |=(% style="width: 160px;" %)HSW33|(% style="width:282px" %)Local time: second|(% style="width:452px" %)Range: 0~~59 (system reserved)
169 |=(% style="width: 160px;" %)HSW34|(% style="width:282px" %)Local time: week|(% style="width:452px" %)(((
170 * =0: Sunday.
171 * =1: Monday.
172 * =2: Tuesday.
173 * =3: Wednesday.
174 * =4: Thursday.
175 * =5: Friday.
176 * =6: Saturday.
177 )))
178 |=(% style="width: 160px;" %)HSW134|(% style="width:282px" %)(((
179 Whether the Script is read through
180
181
182 )))|(% style="width:452px" %)(((
183 **✎Note:** If want to read-only or write-only, please enable this settings.
184
185 * =0: Read from HMI cache(Default)
186 * =1: Read from PLC directly
187 )))
188 |=(% style="width: 160px;" %)HSW135|(% style="width:282px" %)Confirm installment password|(% style="width:452px" %)Confirm button for installment password
189 |=(% style="width: 160px;" %)HSW151|(% style="width:282px" %)Installment due|(% style="width:452px" %)Number of days to installment due
190 |=(% style="width: 160px;" %)HSW185~~200|(% style="width:282px" %)Installment password|(% style="width:452px" %)Enter installment password
191 |=(% style="width: 160px;" %)HSW242|(% style="width:282px" %)(((
192 Prompt result of recipe operation
193
194 * Upload: Data is written from address to file
195 * Download: Data is written from a file to an address
196 )))|(% style="width:452px" %)(((
197 * =1: Download recipe, start
198 * =2: Download recipe, execution error
199 * =3: Download recipe, files don't exist
200 * =4: Download recipe, members don't exist
201 * =5: Download recipe, groups don't exist
202 * =6: Download recipe, success
203 * =7: Upload recipe, start
204 * =8: Upload recipe, execution error
205 * =9: Upload recipe, files don't exist
206 * =10: Upload recipe, members don't exist
207 * =11: Upload recipe, groups don't exist
208 * =12: Upload recipe, success
209 * =13: Insert recipe, start
210 * =14: Insert recipe, execution error
211 * =15: Insert recipe, files don't exist
212 * =16: Insert recipe, members don't exist
213 * =17: Insert recipe, groups don't exist
214 * =18: Insert recipe, success
215 * =19: Delete recipe, start
216 * =20: Delete recipe, execution error
217 * =21: Delete recipe, files don't exist
218 * =22: Delete recipe, members don't exist
219 * =23: Delete recipe, groups don't exist
220 * =24: Delete recipe, success
221 * =25: Delete and sort recipe, start
222 * =26: Delete recipe and sort, execution error
223 * =27: Delete recipe and sort, files don't exist
224 * =28: Delete recipe and sort, members don't exist
225 * =29: Delete recipe and sort, groups don't exist
226 * =30: Delete recipe and sort, success
227 * =37: CSV recipe files import successfully
228 * =38: CSV recipe files import failed.
229 )))
230 |=(% style="width: 160px;" %)HSW243|(% style="width:282px" %)Prompt result of recipe index|(% style="width:452px" %)(((
231 * =31: Recipe index, start
232 * =32: Recipe index, execution error
233 * =33: Recipe index, files don't exist
234 * =34: Recipe index, members don't exist
235 * =35: Recipe index, groups don't exist
236 * =36: Recipe index, success
237 )))
238 |=(% style="width: 160px;" %)HSW521|(% style="width:282px" %)Delete graph and alarm record|(% style="width:452px" %)(((
239 * =0: No operation
240 * =1: HSX521.0=1, delete all records.
241 * =2: HSX521.1=1, delete all trend graph.
242 * =4: HSX521.2=1, delete all alarms.
243 * =16: HSX521.4=1, delete history XY plot.
244 * =32: HSX521.5=1, delete data records in SD card or flash dish;(Please make a setting which is saved to flash disk or SD card in project setting).
245 * =64: HSX521.6=1, delete alarms records in SD card or flash dish; (Please make a setting which is saved to flash disk or SD card in project setting).
246 )))
247 |=(% style="width: 160px;" %)HSW522|(% style="width:282px" %)Copy and paste the alarm/data files in flash to the USB flash disk|(% style="width:452px" %)(((
248 * =0: No operation
249 * =1: HSX522.0=1, copy all record
250 * =2: HSX522.2=1, copy history XY trend graph
251 * =8: HSX522.3=1, copy alarm record
252 * =32: HSX522.5=1, copy recipe
253 )))
254 |=(% style="width: 160px;" %)HSW523|(% style="width:282px" %)Copy and paste the alarm/data files in flash to the SD card|(% style="width:452px" %)(((
255 * =0: No operation
256 * =1: HSX523.0=1, copy all record
257 * =4: HSX523.2=1, copy history XY trend graph
258 * =8: HSX523.3=1, copy alarm record
259 )))
260 |=(% style="width: 160px;" %)HSW524|(% style="width:282px" %)Copy and paste the alarm/data files in SD card to the USB flash disk|(% style="width:452px" %)(((
261 * =0: no operation
262 * =4: HSX524.2=1, copy history XY trend graph
263 * =8: HSX524.3=1, copy alarm record
264 * =16: HSX524.4=1, copy history alarm record
265 * =32: HSX524.5=1, copy data record
266 )))
267 |=(% style="width: 160px;" %)HSW525|(% style="width:282px" %)Copy and paste the alarm/data files in USB flash disk to SD card|(% style="width:452px" %)(((
268 * =0: no operation
269 * =4: HSX525.2=1, copy history XY trend graph
270 * =8: HSX525.3=1, copy alarm record
271 * =16: HSX525.4=1, copy history alarm record
272 * =32: HSX525.5= 1, copy data record
273 )))
274 |=(% style="width: 160px;" %)HSW526|(% style="width:282px" %)Delete file list|(% style="width:452px" %)(((
275 * =0: no operation
276 * =1: HSX526.0=1, delete designated file
277 * =2: HSX526.1=1, delete all files
278 )))
279 |=(% style="width: 160px;" %)HSW527|(% style="width:282px" %)Eject USB flash disk/SD card|(% style="width:452px" %)(((
280 * =0: No operation
281 * =1: Eject USB flash disk
282 * =2: Eject SD card
283 )))
284 |=(% style="width: 160px;" %)HSW528|(% style="width:282px" %)The state of USB flash disk|(% style="width:452px" %)(((
285 * =1: USB flash disk is detected
286 * =2: Ejecting USB flash disk, please waiting…
287 * =3: USB flash disk ejected
288 )))
289 |=(% style="width: 160px;" %)HSW529|(% style="width:282px" %)The state of SD card|(% style="width:452px" %)(((
290 * =1: SD card is detected
291 * =2: Ejecting SD card, please waiting…
292 * =3: SD card ejected
293 )))
294 |=(% style="width: 160px;" %)HSW550~~849|(% style="width:282px" %)Communication control|(% style="width:452px" %)For communication control and communication lamp (please refer to "[[communication control>>http://13.229.109.52:8080/wiki/pistudio/view/Helps/13.HMI%20internal%20registers/#HCommunicationcontrol]]" sector for detailed)
295 |=(% style="width: 160px;" %)HSW850|(% style="width:282px" %)(((
296 Network state
297
298 (4G, WIFI and Ethernet)
299 )))|(% style="width:452px" %)(((
300 In HMI V1.0
301
302 * =0: Network is disconnected.
303 * =1: only LAN connected, and APP can't access HMI.
304 * =2: WECON Cloud connected , APP and web could access HMI.
305
306 In HMI V2.0
307
308 * =0: Network is disconnected.
309 * =1: Network is connected.
310 )))
311 |=(% style="width: 160px;" %)HSW855|(% style="width:282px" %)Backlight Control|(% style="width:452px" %)(((
312 * HSX855.0=1: turn on the backlight and reset automatically after being triggered.
313 * HSX855.1=1: turn off the backlight and reset automatically after being triggered.
314 )))
315 |=(% style="width: 160px;" %)HSW856|(% style="width:282px" %)Whether to close the indirect screen when the current screen is switched to the other screen)|(% style="width:452px" %)(((
316 * =0: close the sub-screen, including the indirect screen;
317 * =1: not to close.
318 )))
319 |=(% style="width: 160px;" %)HSW857|(% style="width:282px" %)Permission in remote access (web page, mobile APP, cloud platform, etc.)|(% style="width:452px" %)(((
320 * =0: users could switch the screen, control the switch and update data in remote access.
321 * =1: users could only control function switch (only switch the screen), view data and switch state, but could not operate or update them.
322 * =2: users could neither operate the screen switch, nor switch operation and data modification, only view. (The ig series and 8000/9000 series with -R after system upgrade)
323 )))
324 |=(% style="width: 160px;" %)HSW860~~861|(% style="width:282px" %)Data partition remaining space|(% style="width:452px" %)Display the data partition remaining space, updated every minute, unit(**kB**)
325 |=(% style="width: 160px;" %)HSW880|(% style="width:282px" %)Enable data partition remaining space|(% style="width:452px" %)(((
326 ~=1, able to view the data partition remaining space from HSW860~~861.
327
328 ~=Other value except 1, disable the viewing function.
329 )))
330 |=(% style="width: 160px;" %)HSW881|(% style="width:282px" %)Storage of Record files|(% style="width:452px" %)(((
331 It is used for controlling saving alarm/data record files to U disk / SD card.
332
333 * = 0: Save to storage.
334 * = 1: Don't save to storage.
335 )))
336 |=(% style="width: 160px;" %)HSW882|(% style="width:282px" %)Storage device status|(% style="width:452px" %)(((
337 * HDX882.0=0 USB flash doesn't execute storage or storage finished.
338 * HDX882.0=1 USB flash is reading data, don't remove USB flash.
339 * HDX882.1=0 SD card doesn't execute storage or storage finished.
340 * HDX882.1=1 SD card is reading data, don't remove SD card.
341 )))
342 |=(% style="width: 160px;" %)HSW884|(% style="width:282px" %)Enter the system network configuration interface|(% style="width:452px" %)(((
343 * =0: Do not enter the network configuration interface
344 * =1: Enter the system network configuration interface.
345 ** ig series HMI only supports to enter the system interface
346
347 )))
348 |=(% style="width: 160px;" %)HSW885|(% style="width:282px" %)When the control object hides the address is read failed (communication failure), set the display mode of the object|(% style="width:452px" %)(((
349 * = 0: displayed by object setting.
350 * =1: control address read failure, the address control of all objects is hidden, not displayed.
351 * =2: control address read failure, the address control of all objects is displayed, not hidden.
352 )))
353 |=(% style="width: 160px;" %)HSW893|(% style="width:282px" %)(((
354 User Permission Control Address, same as HUW1000 feature, please refer to chapter "[[User Permission>>http://13.229.109.52:8080/wiki/pistudio/view/Helps/08.Basic%20Function/#HUserPermission]]"
355
356 **✎Note: **This address can only take effect when it is operated in the real HMI, and the operation is invalid on Web/App side.
357 )))|(% style="width:452px" %)(((
358 * =1: User Log in
359 * =2: Change User password
360 * =3: User Log out
361 * =4: New user
362 * =5: Delete user
363 * =6: Add user rights
364 * =8: Add Hide features
365 * =9: Delete Profile
366 * =10: Export Profile
367 * =11: Import profile
368 * =12: Export log file
369 * =13: Delete log file
370 )))
371 |=(% style="width: 160px;" %)HSW900|(% style="width:282px" %)Quick update frequency settings for objects|(% style="width:452px" %)(((
372 Valid when the object is enabled for "quick update". Default: 5.
373
374 Range: 1 (fastest) ~~ 50 (slowest)
375 )))
376 |=(% style="width: 160px;" %)HSW920|(% style="width:282px" %)Static mode Maximum periods|(% style="width:452px" %)Numeric Input/ Display (range: 0-12)
377 |=(% style="width: 160px;" %)HSW921 ~~ 924|(% style="width:282px" %)Static mode Admin key|(% style="width:452px" %)Character Input/ Display (length: 8)
378 |=(% style="width: 160px;" %)HSW925 ~~ 928|(% style="width:282px" %)1^^st^^ period key (Static mode)|(% style="width:452px" %)Character Input/ Display (length: 8)
379 |=(% style="width: 160px;" %)HSW929 ~~ 933|(% style="width:282px" %)1^^st^^ expiry time (Static mode)|(% style="width:452px" %)Numeric Input/ Display (YYYYMMDDHHMM)
380 |=(% style="width: 160px;" %)HSW935 ~~ 938|(% style="width:282px" %)2^^nd^^ period key (Static mode)|(% style="width:452px" %)Character Input/ Display (length: 8)
381 |=(% style="width: 160px;" %)HSW939 ~~ 943|(% style="width:282px" %)2^^nd ^^expiry time (Static mode)|(% style="width:452px" %)Numeric Input/ Display (YYYYMMDDHHMM)
382 |=(% style="width: 160px;" %)HSW945 ~~ 948|(% style="width:282px" %)3^^rd^^ period key (Static mode)|(% style="width:452px" %)Character Input/ Display (length: 8)
383 |=(% style="width: 160px;" %)HSW949 ~~ 953|(% style="width:282px" %)3^^rd ^^expiry time (Static mode)|(% style="width:452px" %)Numeric Input/ Display (YYYYMMDDHHMM)
384 |=(% style="width: 160px;" %)HSW955 ~~ 958|(% style="width:282px" %)4^^th^^ period key (Static mode)|(% style="width:452px" %)Character Input/ Display (length: 8)
385 |=(% style="width: 160px;" %)HSW959 ~~ 963|(% style="width:282px" %)4^^th ^^expiry time (Static mode)|(% style="width:452px" %)Numeric Input/ Display (YYYYMMDDHHMM)
386 |=(% style="width: 160px;" %)HSW965 ~~ 968|(% style="width:282px" %)5^^th^^ period key (Static mode)|(% style="width:452px" %)Character Input/ Display (length: 8)
387 |=(% style="width: 160px;" %)HSW969 ~~ 973|(% style="width:282px" %)5^^th ^^expiry time (Static mode)|(% style="width:452px" %)Numeric Input/ Display (YYYYMMDDHHMM)
388 |=(% style="width: 160px;" %)HSW975 ~~ 978|(% style="width:282px" %)6^^th^^ period key (Static mode)|(% style="width:452px" %)Character Input/ Display (length: 8)
389 |=(% style="width: 160px;" %)HSW979 ~~ 983|(% style="width:282px" %)6^^th ^^expiry time (Static mode)|(% style="width:452px" %)Numeric Input/ Display (YYYYMMDDHHMM)
390 |=(% style="width: 160px;" %)HSW985 ~~ 988|(% style="width:282px" %)7^^th^^ period key (Static mode)|(% style="width:452px" %)Character Input/ Display (length: 8)
391 |=(% style="width: 160px;" %)HSW989 ~~ 993|(% style="width:282px" %)7^^th ^^expiry time (Static mode)|(% style="width:452px" %)Numeric Input/ Display (YYYYMMDDHHMM)
392 |=(% style="width: 160px;" %)HSW995 ~~ 998|(% style="width:282px" %)8^^th^^ period key (Static mode)|(% style="width:452px" %)Character Input/ Display (length: 8)
393 |=(% style="width: 160px;" %)HSW999 ~~ 1003|(% style="width:282px" %)8^^th ^^expiry time (Static mode)|(% style="width:452px" %)Numeric Input/ Display (YYYYMMDDHHMM)
394 |=(% style="width: 160px;" %)HSW1005 ~~1008|(% style="width:282px" %)9^^th^^ period key (Static mode)|(% style="width:452px" %)Character Input/ Display (length: 8)
395 |=(% style="width: 160px;" %)HSW1009 ~~ 1013|(% style="width:282px" %)9^^th ^^expiry time (Static mode)|(% style="width:452px" %)Numeric Input/ Display (YYYYMMDDHHMM)
396 |=(% style="width: 160px;" %)HSW1015 ~~1018|(% style="width:282px" %)10^^th^^ period key (Static mode)|(% style="width:452px" %)Character Input/ Display (length: 8)
397 |=(% style="width: 160px;" %)HSW1019 ~~ 1023|(% style="width:282px" %)10^^th ^^expiry time (Static mode)|(% style="width:452px" %)Numeric Input/ Display (YYYYMMDDHHMM)
398 |=(% style="width: 160px;" %)HSW1025 ~~1028|(% style="width:282px" %)11^^th^^ period key (Static mode)|(% style="width:452px" %)Character Input/ Display (length: 8)
399 |=(% style="width: 160px;" %)HSW1029 ~~ 1033|(% style="width:282px" %)11^^th ^^expiry time (Static mode)|(% style="width:452px" %)Numeric Input/ Display (YYYYMMDDHHMM)
400 |=(% style="width: 160px;" %)HSW1035 ~~1038|(% style="width:282px" %)12^^th^^ period key (Static mode)|(% style="width:452px" %)Character Input/ Display (length: 8)
401 |=(% style="width: 160px;" %)HSW1039 ~~ 1043|(% style="width:282px" %)12^^th ^^expiry time (Static mode)|(% style="width:452px" %)Numeric Input/ Display (YYYYMMDDHHMM)
402 |=(% style="width: 160px;" %)HSW1046|(% style="width:282px" %)Current period (Static mode)|(% style="width:452px" %)Current period (Range 1-13)
403 |=(% style="width: 160px;" %)HSW1047|(% style="width:282px" %)Save settings (Static mode)|(% style="width:452px" %)(((
404 * HSX1047.0=1: Save static installment information
405 * HSX1047.1=1: Write installment information to registers
406 )))
407 |=(% style="width: 160px;" %)HSW1050~~HSW1065|(% style="width:282px" %)The recipe name that can input csv format|(% style="width:452px" %)Input CSV format recipe file name through "Character Input/ Display".(This function should be used in combination with the recipefunction)
408 |=(% style="width: 160px;" %)HSW1066|(% style="width:282px" %)Configure the type of the CSV file imported|(% style="width:452px" %)(((
409 The CSV file type imported (This function should be used in combination with the recipe function)
410
411 * =0: Import customed CSV file. The data in the file is valid.
412 * =1: Import ordinary recipe files of regular series HMI. The 1st row of the file is invalid.
413 * =2: Import special recipe files of regular series HMI. The 1st and 3nd rows and the 1st colume of the file is invalid.
414 )))
415 |=(% style="width: 160px;" %)HSW1067|(% style="width:282px" %)Location where the CSV file is saved|(% style="width:452px" %)(((
416 Set the path of CSV file (This function should be used in combination with the recipe function)
417
418 * =0: In the CsvFile directory of the USB stick
419 * =1: In the CsvFile directory of the SD card
420 )))
421 |=(% style="width: 160px;" %)HSW1070|(% style="width:282px" %)The time interval (seconds) since the last time the screen was clicked|(% style="width:452px" %)(((
422 Shows how long the current screen has not been clicked, using a decimal unsigned double word (Numeric Input/ Display).
423
424 **✎Note: **This register is cleared to zero regardless of which user clicks on the screen.
425 )))
426 |=(% style="width: 160px;" %)HSW1073|(% style="width:282px" %)Corresponding key value from keyboard|(% style="width:452px" %)Display the key value of the currently pressed key, the key value is shown in Table 1 (not updated when the character input display is being input)
427 |=(% style="width: 160px;" %)HSW1074|(% style="width:282px" %)Keyboard key status|(% style="width:452px" %)Display the current button status (not updated when the numeric input display is being input)(((
428 * =0: key release
429 * =1: key press
430 * =2: Long press the button
431 )))
432 |=(% style="width: 160px;" %)HSW1075|(% style="width:282px" %)Cursor speed|(% style="width:452px" %)Control the cursor movement speed, the range is 0～100, the default is 20
433 |=(% style="width: 160px;" %)HSW1076|(% style="width:282px" %)Cursor x coordinate value|(% style="width:452px" %)Record the x value at the current position of the cursor, range: 0 to screen width -1
434 |=(% style="width: 160px;" %)HSW1077|(% style="width:282px" %)Cursor y coordinate value|(% style="width:452px" %)Record the y value at the current position of the cursor, range: 0 to screen height-1
435 |=(% style="width: 160px;" %)HSW1078|(% style="width:282px" %)Corresponding ASCII code for keyboard keys|(% style="width:452px" %)Only the ASCII value of letters, numbers, and symbols are displayed, and the ASCII value of the function button is not displayed.
436 |=(% style="width: 160px;" %)HSW1079|(% style="width:282px" %)Trigger to set the cursor position and set the Enter key mode|(% style="width:452px" %)(((
437 * HSX1079.0=1: Set the cursor position according to the cursor xy register value;
438 * HSX1079.1=0: When the numeric/character input display is being input, press Enter to end the input, no value/text part is being input, Enter is a normal click;
439 * HSX1079.1=1 Regardless of whether the numeric/character component is inputting the Enter key, only normal click is performed, and the keyboard end input is not performed.
440 )))
441 |=(% style="width: 160px;" %)HSW1083|(% style="width:282px" %)Naming method for printing object screenshots|(% style="width:452px" %)(((
442 Example: The time is 2019-01-04 14:29:10 (523 milliseconds), the screen number is 0, and the object ID is 2.
443
444 * =0: Use year, month, day, hour, minute, second, millisecond, screen number, part number to name, such as: 2019010414291052302.bmp.
445 * =1: Name using year, month, day, hour, minute, and second.
446
447 For example: 20190104142910.bmp.
448 )))
449 |=(% style="width: 160px;" %)HSW1086|(% style="width:282px" %)Control address mapping polling cycle, unit: ms|(% style="width:452px" %)(((
450 Address mapping polling cycle, effective range: 40~~1000ms, default: 300ms.
451
452 * When the set value is greater than 1000, the value is 1000.
453 * When the set value is greater than 1000, it changes to the default value 300
454 )))
455 |=(% style="width: 160px;" %)HSW1087|(% style="width:282px" %)Control write interval in address mapping|(% style="width:452px" %)(((
456 After reading data to the device for N times, Perform an address mapping write operation. N is the interval value. The effective range: 0~~5, and default is 2.
457
458 When N more than 5, it is 5.
459
460 0 is the fastest and 5 is the slowest.
461 )))
462 |=(% style="width: 160px;" %)HSW1088|(% style="width:282px" %)Control the write interval of script|(% style="width:452px" %)(((
463 After reading data to the device for N times, Perform a script write operation. N is the interval value. The effective range: 0~~5, and default is 2.
464
465 When N more than 5, it is 5.
466
467 0 is the fastest and 5 is the slowest.
468 )))
469 |=(% style="width: 160px;" %)HSW1089|(% style="width:282px" %)Control interval of read through|(% style="width:452px" %)(((
470 After reading data to the device for N times, Perform a read through operation. N is the interval value. The effective range: 0~~5, and default is 2.
471
472 When N more than 5, it is 5.
473
474 0 is the fastest and 5 is the slowest.
475 )))
476 |=(% style="width: 160px;" %)HSW1100|(% colspan="1" rowspan="4" style="width:282px" %)Set the Master IP for Multi-link|(% style="width:452px" %)High word 1 for Master IP address of multi-link
477 |=(% style="width: 160px;" %)HSW1101|(% style="width:452px" %)High word 2 for Master IP address of multi-link
478 |=(% style="width: 160px;" %)HSW1102|(% style="width:452px" %)High word 3 for Master IP address of multi-link
479 |=(% style="width: 160px;" %)HSW1103|(% style="width:452px" %)High word 4 for Master IP address of multi-link
480 |=(% style="width: 160px;" %)HSW1104|(% style="width:282px" %)Control connection to Master or not for Multi-link slave device|(% style="width:452px" %)(((
481 * =1: Connect to the Master
482 * =0: Do not connect to Master
483 )))
484 |=(% style="width: 160px;" %)HSW1141|(% style="width:282px" %)Release alarm|(% style="width:452px" %)(((
485 * =0, Default value
486 * =1, Release the alarm generated before the last power-down when starting up
487 )))
488 |=(% style="width: 160px;" %)HSW1450|(% style="width:282px" %)Enable objects level password function|(% style="width:452px" %)(((
489 * =0, Disable
490 * =1, Enable
491 )))
492 |=(% style="width: 160px;" %)HSW1451|(% style="width:282px" %)Whether the object level passwords are independent of each other|(% style="width:452px" %)(((
493 * =0, No, high-level passwords can unlock low-level
494 * = 1, Yes, high-level passwords cannot unlock low-level
495 )))
496 |=(% style="width: 160px;" %)HSW1452|(% style="width:282px" %)Initialization level|(% style="width:452px" %)Initialization level while HMI running
497 |=(% style="width: 160px;" %)HSW1454~~1457|(% style="width:282px" %)Password for Level 1|(% style="width:452px" %)(((
498 Display password for level 1, using character input object, up to 8 characters (numbers, letters (case sensitive))
499 )))
500 |=(% style="width: 160px;" %)HSW1458~~1461|(% style="width:282px" %)Password for Level 2|(% style="width:452px" %)Display password for level 2, using character input object, up to 8 characters (numbers, letters (case sensitive))
501 |=(% style="width: 160px;" %)HSW1462~~1465|(% style="width:282px" %)Password for Level 3|(% style="width:452px" %)Display password for level 3, using character input object, up to 8 characters (numbers, letters (case sensitive))
502 |=(% style="width: 160px;" %)HSW1466~~1469|(% style="width:282px" %)Password for Level 4|(% style="width:452px" %)Display password for level 4, using character input object, up to 8 characters (numbers, letters (case sensitive))
503 |=(% style="width: 160px;" %)HSW1470~~1473|(% style="width:282px" %)Password for Level 5|(% style="width:452px" %)Display password for level 5, using character input object, up to 8 characters (numbers, letters (case sensitive))
504 |=(% style="width: 160px;" %)HSW1474~~1477|(% style="width:282px" %)Password for Level 6|(% style="width:452px" %)Display password for level 6, using character input object, up to 8 characters (numbers, letters (case sensitive))
505 |=(% style="width: 160px;" %)HSW1478~~1481|(% style="width:282px" %)Password for Level 7|(% style="width:452px" %)Display password for level 7, using character input object, up to 8 characters (numbers, letters (case sensitive))
506 |=(% style="width: 160px;" %)HSW1482~~1485|(% style="width:282px" %)Password for Level 8|(% style="width:452px" %)Display password for level 8, using character input object, up to 8 characters (numbers, letters (case sensitive))
507 |=(% style="width: 160px;" %)HSW1486~~1489|(% style="width:282px" %)Password for Level 9|(% style="width:452px" %)Display password for level 9, using character input object, up to 8 characters (numbers, letters (case sensitive))
508 |=(% style="width: 160px;" %)HSW1490~~1493|(% style="width:282px" %)Password for Level 10|(% style="width:452px" %)Display password for level 10, using character input object, up to 8 characters (numbers, letters (case sensitive))
509 |=(% style="width: 160px;" %)HSW1494~~1497|(% style="width:282px" %)Password for Level 11|(% style="width:452px" %)Display password for level 11, using character input object, up to 8 characters (numbers, letters (case sensitive))
510 |=(% style="width: 160px;" %)HSW1498~~1501|(% style="width:282px" %)Password for Level 12|(% style="width:452px" %)Display password for level 12, using character input object, up to 8 characters (numbers, letters (case sensitive))
511 |=(% style="width: 160px;" %)HSW1502|(% style="width:282px" %)Modify password for object level|(% style="width:452px" %)(((
512 * HSX1502.0=1: Modification comfirmed. Save the data of HSW1450~~HSW1501 to a file for immediate effect.
513 * HSX1502.1=1:Modification cancelled. Restore the current data of hSW1450-HSW1501 to the data saved in the file last time.
514 )))
515 |=(% style="width: 160px;" %)HSW1509|(% style="width:282px" %)Curve width|(% style="width:452px" %)(((
516 * =0: Use the curve width set by project default.
517 * =1 to 10: use special register to set curve width.
518 )))
519 |=(% style="width: 160px;" %)HSW1603|(% style="width:282px" %)Number of current unreleased alarms|(% style="width:452px" %)The number of current unreleased alarms in alarm record file.
520 |=(% style="width: 160px;" %)HSW1604|(% style="width:282px" %)The auxiliary judgment address when the control bit in the Object Lock fails to be read|(% style="width:452px" %)(((
521 * =0: The auxiliary address is invalid.
522 * =1: When the communication fails, lock the object.
523 * =2: When the communication fails, unlock the object.
524 * =Others: The auxiliary address is invalid.
525 )))
526 |=(% style="width: 160px;" %)HSW1605|(% style="width:282px" %)BCD format natural decimal control|(% style="width:452px" %)(((
527 Whether to display natural decimals with decimal point in BCD format:
528
529 * 0=Not enabled.
530 * 1=Enable.
531
532 (For example, 56.20 is displayed as 56.2, 33.00 is displayed as 33)
533 )))
534 |=(% style="width: 160px;" %)HSW1606|(% style="width:282px" %)User permission modification control|(% style="width:452px" %)(((
535 * =0: Ordinary users are allowed to modify permissions and other operations
536 * =1: Only the administrator can operate (default is 0)
537 )))
538 |=(% style="width: 160px;" %)HSW1607|(% style="width:282px" %)The spacing value among the drop-down items of the drop-down list|(% style="width:452px" %)10 to 50 is effective, such as: 23 is 2.3 times the height of the object.
539 |=(% style="width: 160px;" %)HSW1611|(% style="width:282px" %)(((
540 Traditional recipe transfer
541 )))|(% style="width:452px" %)(((
542 * =1: download traditional recipe.
543 * =2: upload the traditional recipe.
544 )))
545 |=(% style="width: 160px;" %)HSW1612|(% style="width:282px" %)Traditional Recipe group number|(% style="width:452px" %)Traditional Recipe group number
546 |=(% style="width: 160px;" %)HSW1613|(% style="width:282px" %)Display the status of network card|(% style="width:452px" %)(((
547 * =1: Normal
548 * =Others: Abnormal
549 )))
550 |=(% style="width: 160px;" %)HSW1614~~1623|(% style="width:282px" %)Download speed per second|(% style="width:452px" %)Display the download speed per second. (The value is string)
551 |=(% style="width: 160px;" %)HSW1624~~1633|(% style="width:282px" %)Upnload speed per second|(% style="width:452px" %)Display the upload speed per second. (The value is string)
552 |=(% style="width: 160px;" %)HSW1634~~1643|(% style="width:282px" %)Flow consumption rate|(% style="width:452px" %)Display the total flow rate per second (The value is string)
553 |=(% style="width: 160px;" %)HSW1644~~1653|(% style="width:282px" %)Download flow consumption after power on|(% style="width:452px" %)Display the download flow consumption after power on (The value is string)
554 |=(% style="width: 160px;" %)HSW1654~~1663|(% style="width:282px" %)Upload flow consumption after power on|(% style="width:452px" %)Display the upload flow consumption after power on (The value is string)
555 |=(% style="width: 160px;" %)HSW1664~~1673|(% style="width:282px" %)Total flow consumption after power on|(% style="width:452px" %)Display the total flow consumption after power on (download and upload). (The value is string)
556 |=(% style="width: 160px;" %)HSW1674~~1683|(% style="width:282px" %)Historical flow consumption|(% style="width:452px" %)Display historical flow consumption (download and upload). (The value is string)
557 |=(% style="width: 160px;" %)HSW1684~~1693|(% style="width:282px" %)Flow consumption in 10 minutes|(% style="width:452px" %)Flow consumption in 10 minutes (download and upload). (The value is string)
558 |=(% style="width: 160px;" %)HSW1694~~1703|(% style="width:282px" %)Flow consumption in 30 minutes|(% style="width:452px" %)Flow consumption in 30 minutes (download and upload). (The value is string)
559 |=(% style="width: 160px;" %)HSW1704~~1713|(% style="width:282px" %)Flow consumption in 3 hours|(% style="width:452px" %)Flow consumption in 3 hours (download and upload). (The value is string)
560 |=(% style="width: 160px;" %)HSW1715|(% style="width:282px" %)Reset flow|(% style="width:452px" %)(((
561 * =1: Clear historical flow data and restart the count.
562 * =Others: Invalid
563 )))
564 |=(% style="width: 160px;" %)HSW1719|(% style="width:282px" %)Network status of Ethernet connnecting to server|(% style="width:452px" %)(((
565 * =0: Server connection exception
566 * =1: Server connection is OK
567 )))
568 |=(% style="width: 160px;" %)HSW1720|(% colspan="1" rowspan="12" style="width:282px" %)Related IP register in WIFI network status (It is valid when HMI is connected to WIFI)|(% style="width:452px" %)Local IP address high byte 1
569 |=(% style="width: 160px;" %)HSW1721|(% style="width:452px" %)Local IP address high byte 2
570 |=(% style="width: 160px;" %)HSW1722|(% style="width:452px" %)Local IP address high byte 3
571 |=(% style="width: 160px;" %)HSW1723|(% style="width:452px" %)Local IP address high byte 4
572 |=(% style="width: 160px;" %)HSW1724|(% style="width:452px" %)Local mask IP address high byte 1
573 |=(% style="width: 160px;" %)HSW1725|(% style="width:452px" %)Local mask IP address high byte 2
574 |=(% style="width: 160px;" %)HSW1726|(% style="width:452px" %)Local mask IP address high byte 3
575 |=(% style="width: 160px;" %)HSW1727|(% style="width:452px" %)Local mask IP address high byte 4
576 |=(% style="width: 160px;" %)HSW1728|(% style="width:452px" %)Local gateway IP address high byte 1
577 |=(% style="width: 160px;" %)HSW1729|(% style="width:452px" %)Local gateway IP address high byte 2
578 |=(% style="width: 160px;" %)HSW1730|(% style="width:452px" %)Local gateway IP address high byte 3
579 |=(% style="width: 160px;" %)HSW1731|(% style="width:452px" %)Local gateway IP address high byte 4
580 |=(% style="width: 160px;" %)HSW1733|(% colspan="1" rowspan="6" style="width:282px" %)(((
581 Display the MAC code of current WIFI
582
583 (display in hexadecimal)
584 )))|(% style="width:452px" %)Local MAC address high byte 1 (hexadecimal)
585 |=(% style="width: 160px;" %)HSW1734|(% style="width:452px" %)Local MAC address high byte 2 (hexadecimal)
586 |=(% style="width: 160px;" %)HSW1735|(% style="width:452px" %)Local MAC address high byte 3 (hexadecimal)
587 |=(% style="width: 160px;" %)HSW1736|(% style="width:452px" %)Local MAC address high byte 4 (hexadecimal)
588 |=(% style="width: 160px;" %)HSW1737|(% style="width:452px" %)Local MAC address high byte 5 (hexadecimal)
589 |=(% style="width: 160px;" %)HSW1738|(% style="width:452px" %)Local MAC address high byte 6 (hexadecimal)
590 |=(% style="width: 160px;" %)HSW1739|(% style="width:282px" %)Display the network status of WIFI|(% style="width:452px" %)(((
591 * =0: Server connection exception
592 * =1: Server connection is OK
593 )))
594 |=(% style="width: 160px;" %)HSW1741|(% colspan="1" rowspan="12" style="width:282px" %)Related IP register in 4Gnetwork status (It is valid when HMI is connected to 4G)|(% style="width:452px" %)Local IP address high byte 1
595 |=(% style="width: 160px;" %)HSW1742|(% style="width:452px" %)Local IP address high byte 2
596 |=(% style="width: 160px;" %)HSW1743|(% style="width:452px" %)Local IP address high byte 3
597 |=(% style="width: 160px;" %)HSW1744|(% style="width:452px" %)Local IP address high byte 4
598 |=(% style="width: 160px;" %)HSW1745|(% style="width:452px" %)Local mask IP address high byte 1
599 |=(% style="width: 160px;" %)HSW1746|(% style="width:452px" %)Local mask IP address high byte 2
600 |=(% style="width: 160px;" %)HSW1747|(% style="width:452px" %)Local mask IP address high byte 3
601 |=(% style="width: 160px;" %)HSW1748|(% style="width:452px" %)Local mask IP address high byte 4
602 |=(% style="width: 160px;" %)HSW1749|(% style="width:452px" %)Local gateway IP address high byte 1
603 |=(% style="width: 160px;" %)HSW1750|(% style="width:452px" %)Local gateway IP address high byte 2
604 |=(% style="width: 160px;" %)HSW1751|(% style="width:452px" %)Local gateway IP address high byte 3
605 |=(% style="width: 160px;" %)HSW1752|(% style="width:452px" %)Local gateway IP address high byte 4
606 |=(% style="width: 160px;" %)HSW1754|(% colspan="1" rowspan="6" style="width:282px" %)(((
607 Display the MAC code of current WIFI
608
609 (display in hexadecimal)
610 )))|(% style="width:452px" %)Local MAC address high byte 1 (hexadecimal)
611 |=(% style="width: 160px;" %)HSW1755|(% style="width:452px" %)Local MAC address high byte 2 (hexadecimal)
612 |=(% style="width: 160px;" %)HSW1756|(% style="width:452px" %)Local MAC address high byte 3 (hexadecimal)
613 |=(% style="width: 160px;" %)HSW1757|(% style="width:452px" %)Local MAC address high byte 4 (hexadecimal)
614 |=(% style="width: 160px;" %)HSW1758|(% style="width:452px" %)Local MAC address high byte 5 (hexadecimal)
615 |=(% style="width: 160px;" %)HSW1759|(% style="width:452px" %)Local MAC address high byte 6 (hexadecimal)
616 |=(% style="width: 160px;" %)HSW1760|(% style="width:282px" %)Display 4G network status|(% style="width:452px" %)(((
617 * =0: Server connection exception
618 * =1: Server connection is OK
619 )))
620 |=(% style="width: 160px;" %)HSW1761|(% style="width:282px" %)Display 4G network signal strength|(% style="width:452px" %)Signal strength: 0~~31. The greater the value ,the signal is stronger
621 |=(% style="width: 160px;" %)(((
622 HSW1762
623 )))|(% colspan="1" rowspan="13" style="width:282px" %)(((
624 Note: Valid when Ethernet2 of HMI is plugged into the network cable.
625 ①、When the Ethernet setting is enabled in the project parameters, this register displays the set value.
626 ②. When the Ethernet setting is not enabled in the engineering parameters, the register displays the Ethernet IP automatically acquired by the HMI.
627 ③. When the HMI is not plugged into the network cable, the register will show 0 whether the engineering parameters are set or not.
628 ④.IP related registers can be read and written (only static IP mode can be written).
629 )))|(% style="width:452px" %)(((
630 Ethernet2 Local IP address high byte 1
631 )))
632 |=(% style="width: 160px;" %)(((
633 HSW1763
634 )))|(% style="width:452px" %)(((
635 Ethernet2 Local IP address high byte 2
636 )))
637 |=(% style="width: 160px;" %)(((
638 HSW1764
639 )))|(% style="width:452px" %)(((
640 Ethernet2 Local IP address high byte 3
641 )))
642 |=(% style="width: 160px;" %)(((
643 HSW1765
644 )))|(% style="width:452px" %)(((
645 Ethernet2 Local IP address high byte 4
646 )))
647 |=(% style="width: 160px;" %)(((
648 HSW1766
649 )))|(% style="width:452px" %)(((
650 Ethernet2 Local mask IP address high byte 1
651 )))
652 |=(% style="width: 160px;" %)(((
653 HSW1767
654 )))|(% style="width:452px" %)(((
655 Ethernet2 Local mask IP address high byte 2
656 )))
657 |=(% style="width: 160px;" %)(((
658 HSW1768
659 )))|(% style="width:452px" %)Ethernet2 Local mask IP address high byte 3
660 |=(% style="width: 160px;" %)HSW1769|(% style="width:452px" %)Ethernet2 Local mask IP address high byte 4
661 |=(% style="width: 160px;" %)(((
662 HSW1770
663 )))|(% style="width:452px" %)(((
664 Ethernet2 Local gateway IP address high byte 1
665 )))
666 |=(% style="width: 160px;" %)(((
667 HSW1771
668 )))|(% style="width:452px" %)(((
669 Ethernet2 Local gateway IP address high byte 2
670 )))
671 |=(% style="width: 160px;" %)(((
672 HSW1772
673 )))|(% style="width:452px" %)(((
674 Ethernet2 Local gateway IP address high byte 3
675 )))
676 |=(% style="width: 160px;" %)(((
677 HSW1773
678 )))|(% style="width:452px" %)(((
679 Ethernet2 Local gateway IP address high byte 4
680 )))
681 |=(% style="width: 160px;" %)(((
682 HSW1774
683 )))|(% style="width:452px" %)(((
684 Ethernet2 Local Port Address
685 )))
686 |=(% style="width: 160px;" %)(((
687 HSW1775
688 )))|(% colspan="1" rowspan="6" style="width:282px" %)(((
689 ①Display the MAC code of Ethernet2 NIC
690
691 (hexadecimal display)
692
693 ②Read-only mode, not modifiable
694 )))|(% style="width:452px" %)(((
695 Ethernet2 Local MAC code high byte 1
696 )))
697 |=(% style="width: 160px;" %)(((
698 HSW1776
699 )))|(% style="width:452px" %)(((
700 Ethernet2 Local MAC code high byte 2
701 )))
702 |=(% style="width: 160px;" %)(((
703 HSW1777
704 )))|(% style="width:452px" %)(((
705 Ethernet2 Local MAC code high byte 3
706 )))
707 |=(% style="width: 160px;" %)(((
708 HSW1778
709 )))|(% style="width:452px" %)(((
710 Ethernet2 Local MAC code high byte 4
711 )))
712 |=(% style="width: 160px;" %)(((
713 HSW1779
714 )))|(% style="width:452px" %)(((
715 Ethernet2 Local MAC code high byte 5
716 )))
717 |=(% style="width: 160px;" %)(((
718 HSW1780
719 )))|(% style="width:452px" %)(((
720 Ethernet2 Local MAC code high byte 6
721 )))
722 |=(% style="width: 160px;" %)(((
723 HSW1781
724 )))|(% colspan="1" rowspan="8" style="width:282px" %)(((
725 ①Display and modify DNS1 and DNS2 of Ethernet2
726
727 ②Related registers can be read and written mode (only static IP mode can be written)
728 )))|(% style="width:452px" %)(((
729 Ethernet2 Local DNS1 address high byte 1
730 )))
731 |=(% style="width: 160px;" %)(((
732 HSW1782
733 )))|(% style="width:452px" %)(((
734 Ethernet2 Local DNS1 address high byte 2
735 )))
736 |=(% style="width: 160px;" %)(((
737 HSW1783
738 )))|(% style="width:452px" %)(((
739 Ethernet2 Local DNS1 address high byte 3
740 )))
741 |=(% style="width: 160px;" %)(((
742 HSW1784
743 )))|(% style="width:452px" %)(((
744 Ethernet2 Local DNS1 address high byte 4
745 )))
746 |=(% style="width: 160px;" %)(((
747 HSW1785
748 )))|(% style="width:452px" %)(((
749 Ethernet2 Local DNS2 address high byte 1
750 )))
751 |=(% style="width: 160px;" %)(((
752 HSW1786
753 )))|(% style="width:452px" %)(((
754 Ethernet2 Local DNS2 address high byte 2
755 )))
756 |=(% style="width: 160px;" %)(((
757 HSW1787
758 )))|(% style="width:452px" %)(((
759 Ethernet2 Local DNS2 address high byte 3
760 )))
761 |=(% style="width: 160px;" %)(((
762 HSW1788
763 )))|(% style="width:452px" %)(((
764 Ethernet2 Local DNS2 address high byte 4
765 )))
766 |=(% style="width: 160px;" %)(((
767 HSW1789
768 )))|(% colspan="1" style="width:282px" %)(((
769 Display or set the dynamic or static IP mode of Ethernet2
770 )))|(% style="width:452px" %)(((
771 HSX1789.0 = 0, Static IP mode
772
773 HSX1789.0 = 1, dynamic IP mode
774 )))
775 |=(% style="width: 160px;" %)(((
776 HSW1790
777 )))|(% colspan="1" style="width:282px" %)(((
778 Confirm Ethernet2 IP, subnet mask, gateway, DNS1, DNS2, and dynamic static IP settings
779 )))|(% style="width:452px" %)(((
780 ~= 1, confirm the setting (i.e., after modifying IP-related information, set this address to 1, representing confirmation of the modification, after which it will be reset to 0)
781 )))
782 |=(% style="width: 160px;" %)(((
783 HSW1791
784 )))|(% colspan="1" style="width:282px" %)(((
785 Network status of the Ethernet2 connection server
786 )))|(% style="width:452px" %)(((
787 ~= 0, connection to the server is abnormal = 1, connection to the server is normal
788 )))
789 |=(% style="width: 160px;" %)HSW1852|(% style="width:282px" %)Control the interval in two consecutive clicks|(% style="width:452px" %)Limit range: 1~~500ms. The default is 100 ms.
790 |=(% style="width: 160px;" %)HSW1853|(% style="width:282px" %)File format for exporting data records to USB flash drive or SD card|(% style="width:452px" %)(((
791 * =0: db database
792 * =1: CSV
793 )))
794 |=(% style="width: 160px;" %)HSW1854|(% style="width:282px" %)High and low word conversion type|(% style="width:452px" %)(((
795 * =0: use the old high-low word conversion (default)
796 * =1: usie the new high-low word conversion
797 )))
798 |=(% style="width: 160px;" %)HSW1855|(% style="width:282px" %)Screen Lock prompt display control|(% style="width:452px" %)(((
799 Control whether the screen lock prompt is displayed,
800
801 * =0: display(default value)
802 * =Other: no display.
803 )))
804 |=(% style="width: 160px;" %)HSW1856|(% style="width:282px" %)Display map fence drawing status|(% style="width:452px" %)(((
805 * =0: no map fence
806 * =1: The map fence is drawn and the device is inside the fence
807 * =2: The map fence is drawn and the device is outside the fence
808 )))
809 |=(% style="width: 160px;" %)HSW1857|(% style="width:282px" %)USB disk download |(% style="width:452px" %)(((
810 * =0: download project
811 * =1: download firmware
812 * =2: enter the background
813 )))
814 |=(% style="width: 160px;" %)HSW1865|(% style="width:282px" %)Priority connection to the cloud|(% style="width:452px" %)(((
815 * =0: priority Ethernet
816 * =1: priority WLAN
817 * =2: priority 4G
818 )))
819 |=(% style="width: 160px;" %)HSW1866|(% style="width:282px" %)Delete the LUa extension module file|(% style="width:452px" %)(((
820 * =0: delete;
821 * = Others: do not delete
822 )))
823 |=(% style="width: 160px;" %)HSW1867|(% style="width:282px" %)Reset mode|(% style="width:452px" %)(((
824 Monitor address is set during reset of reset switch, whether to cancel reset,
825
826 * = 0: yes (default);
827 * = 1: no
828 )))
829 |=(% style="width: 160px;" %)HSW1868|(% style="width:282px" %)Double-click or long press the record type table mode|(% style="width:452px" %)(((
830 Controls whether the button pops up when double-clicking or long pressing on record type table object
831
832 * = 0: yes (default);
833 * = 1: no
834 )))
835 |=(% style="width: 160px;" %)(((
836 HSW1870
837 )))|(% style="width:282px" %)(((
838 Display or set the dynamic or static IP mode of Ethernet1
839 )))|(% style="width:452px" %)(((
840 HSX1870.0 = 0, Static IP mode
841
842 HSX1870.0 = 1, dynamic IP mode
843 )))
844 |=(% style="width: 160px;" %)(((
845 HSW1871
846 )))|(% style="width:282px" %)(((
847 Confirm the IP, subnet mask, gateway, DNS1, DNS2, and dynamic static IP settings for Ethernet1
848 )))|(% style="width:452px" %)(((
849 ~= 1, confirm the setting (i.e., after modifying IP-related information, set this address to 1, representing confirmation of the modification, after which it will be reset to 0)
850 )))
851 |=(% style="width: 160px;" %)(((
852 HSW1872
853 )))|(% colspan="1" rowspan="8" style="width:282px" %)(((
854 ①Display and modify DNS1 and DNS2 of Ethernet1
855
856 ②Related registers can be read and written mode (only static IP mode can be written)
857 )))|(% style="width:452px" %)(((
858 Ethernet1 Local DNS1 address high byte 1
859 )))
860 |=(% style="width: 160px;" %)(((
861 HSW1873
862 )))|(% style="width:452px" %)Ethernet1 Local DNS1 address high byte 2
863 |=(% style="width: 160px;" %)(((
864 HSW1874
865 )))|(% style="width:452px" %)Ethernet1 Local DNS1 address high byte 3
866 |=(% style="width: 160px;" %)(((
867 HSW1875
868 )))|(% style="width:452px" %)Ethernet1 Local DNS1 address high byte 4
869 |=(% style="width: 160px;" %)(((
870 HSW1876
871 )))|(% style="width:452px" %)Ethernet1 Local DNS2 address high byte 1
872 |=(% style="width: 160px;" %)(((
873 HSW1877
874 )))|(% style="width:452px" %)Ethernet1 Local DNS2 address high byte 2
875 |=(% style="width: 160px;" %)(((
876 HSW1878
877 )))|(% style="width:452px" %)Ethernet1 Local DNS2 address high byte 3
878 |=(% style="width: 160px;" %)(((
879 HSW1879
880 )))|(% style="width:452px" %)Ethernet1 Local DNS2 address high byte 4
881 |=(% style="width: 160px;" %)HSW10000~~19999|(% style="width:282px" %)Power-down storage area|(% style="width:452px" %)After restart, the data remains
882 |=(% style="width: 160px;" %)HSW10035|(% rowspan="13" style="width:282px" %)(((
883 Note: Valid when Ethernet1 of HMI is plugged into the network cable.
884 ①、When the Ethernet setting is enabled in the project parameters, this register displays the set value.
885 ②. When the Ethernet setting is not enabled in the engineering parameters, the register displays the Ethernet IP automatically acquired by the HMI.
886 ③. When the HMI is not plugged into the network cable, the register will show 0 whether the engineering parameters are set or not.
887 ④.IP related registers can be read and written (only static IP mode can be written).
888 )))|(% style="width:452px" %)Local IP address high byte 1
889 |=(% style="width: 160px;" %)HSW10036|(% style="width:452px" %)Local IP address high byte 2
890 |=(% style="width: 160px;" %)HSW10037|(% style="width:452px" %)Local IP address high byte 3
891 |=(% style="width: 160px;" %)HSW10038|(% style="width:452px" %)Local IP address high byte 4
892 |=(% style="width: 160px;" %)HSW10039|(% style="width:452px" %)Local mask IP address high byte 1
893 |=(% style="width: 160px;" %)HSW10040|(% style="width:452px" %)Local mask IP address high byte 2
894 |=(% style="width: 160px;" %)HSW10041|(% style="width:452px" %)Local mask IP address high byte 3
895 |=(% style="width: 160px;" %)HSW10042|(% style="width:452px" %)Local mask IP address high byte 4
896 |=(% style="width: 160px;" %)HSW10043|(% style="width:452px" %)Local gateway address high byte 1
897 |=(% style="width: 160px;" %)HSW10044|(% style="width:452px" %)Local gateway address high byte 2
898 |=(% style="width: 160px;" %)HSW10045|(% style="width:452px" %)Local gateway address high byte 3
899 |=(% style="width: 160px;" %)HSW10046|(% style="width:452px" %)Local gateway address high byte 4
900 |=(% style="width: 160px;" %)HSW10047|(% style="width:452px" %)Local port address
901 |=(% style="width: 160px;" %)HSW10048|(% rowspan="6" style="width:282px" %)(((
902 ①Display the MAC code of Ethernet1 NIC
903
904 (hexadecimal display)
905
906 ②Read-only mode, not modifiable
907 )))|(% style="width:452px" %)Local MAC code high word 1
908 |=(% style="width: 160px;" %)HSW10049|(% style="width:452px" %)Local MAC code high word 2
909 |=(% style="width: 160px;" %)HSW10050|(% style="width:452px" %)Local MAC code high word 3
910 |=(% style="width: 160px;" %)HSW10051|(% style="width:452px" %)Local MAC code high word 4
911 |=(% style="width: 160px;" %)HSW10052|(% style="width:452px" %)Local MAC code high word 5
912 |=(% style="width: 160px;" %)HSW10053|(% style="width:452px" %)Local MAC code high word 6
913 |=(% style="width: 160px;" %)HSW10118|(% colspan="1" rowspan="2" style="width:282px" %)TSAP settings for HMI in the Siemens logo! 8 protocol|(% style="width:452px" %)HMI local TSAP, which corresponds to the remote TSAP of PLC
914 |=(% style="width: 160px;" %)HSW10119|(% style="width:452px" %)HMI remote TSAP, which corresponds to the local TSAP of PLC
915 |=(% style="width: 160px;" %)HSW10461~~10493|(% style="width:282px" %)Remote access password|(% style="width:452px" %)8-character remote access password
916 |=(% style="width: 160px;" %)HSW10494~~10558|(% style="width:282px" %)Machine ID (Read only)|(% style="width:452px" %)Machine ID for remote access (read only 64-bit)
917 |=(% style="width: 160px;" %)HSW10576|(% style="width:282px" %)Save dynamic installment settings|(% style="width:452px" %)HSX10576.0=1: Save the set dynamic installment information
918 |=(% style="width: 160px;" %)HSW10577|(% style="width:282px" %)Control address for installment|(% style="width:452px" %)(((
919 * HSX10577.0=0: disable dynamic installment
920 * HSX10577.0=1: enable dynamic installment
921 * HSX10577.1=0: disable static installment
922 * HSX10577.1=1: enable static installment
923 )))
924 |=(% style="width: 160px;" %)HSW10578-10583|(% style="width:282px" %)Password for dynamic installment|(% style="width:452px" %)Character Input/ Display (length: 6)
925 |=(% style="width: 160px;" %)HSW10584-10586|(% style="width:282px" %)Expiry time of dynamic installment|(% style="width:452px" %)Expiry time: YYYYMMDD (Numeric Input/ Display)
926 |=(% style="width: 160px;" %)HSW10587-10589|(% style="width:282px" %)Last expiry time of dynamic installment|(% style="width:452px" %)Expiry time: YYYYMMDD (Numeric Input/ Display)
927 |=(% style="width: 160px;" %)HSW10590|(% style="width:282px" %)Background light time|(% style="width:452px" %)(((
928 Set the light time for background
929
930 * =0: The screen backlight is always on.
931 * =Others: The screen backlight is on for a period of time and then turns off. The length of time is controlled by the value of the register address. Unit: second.
932 )))
933 |=(% style="width: 160px;" %)HSW10591|(% style="width:282px" %)Backlight brightness adjustment|(% style="width:452px" %)Backlight brightness range: 1 (darkest) ~~ 100 (brightest)
934 |=(% style="width: 160px;" %)HSW10603|(% style="width:282px" %)Set the printer to print orientation|(% style="width:452px" %)(((
935 Set the print direction:
936
937 * =1: Forward printing
938 * =2: Reverse print
939 * =Other: Forward print
940 )))
941 |=(% style="width: 160px;" %)HSW10604|(% style="width:282px" %)Print dot type|(% style="width:452px" %)(((
942 * =1: new firmware 8 dot matrix type
943 * =2: new firmware 24 dot matrix type
944 * =3: old firmware 8 dot matrix type
945 * =4: old firmware 24 dot matrix type
946 * =Other: new firmware 8 dot matrix type
947 )))
948 |=(% style="width: 160px;" %)HSW10605|(% style="width:282px" %)Print width of printer|(% style="width:452px" %)Set the width of the printer to print (in pixels), such as HSW10605 = 394: The printer supports images with a print width of 394 pixels
949 |=(% style="width: 160px;" %)HSW10606|(% style="width:282px" %)Printer instruction type|(% style="width:452px" %)(((
950 * =1: Graphic print type
951 * =2: Dot density printing type
952 * =3: special for EPSON printer
953 )))
954 |=(% style="width: 160px;" %)HSW10607|(% style="width:282px" %)Printer paper cutting function|(% style="width:452px" %)(((
955 * =1: Enable
956 * =2: Disable
957 )))
958 |=(% style="width: 160px;" %)HSW10608|(% style="width:282px" %)Print the alignment of the text|(% style="width:452px" %)(((
959 * =1: Left alignment
960 * =2: Center alignment
961 * =3: Right alignment
962 )))
963 |=(% style="width: 160px;" %)HSW10610|(% style="width:282px" %)Set weconcloud server|(% style="width:452px" %)(((
964 * =0: Select the server configured in "Project Settings"
965 * =1: select Server 1
966 * =2: select Server 2
967 )))
968 |=(% style="width: 160px;" %)HSW11750|(% style="width:282px" %)Set the language of the Message List prompt** (ie series)**|(% style="width:452px" %)(((
969 * =0: which is followed the project language
970 * =1: English
971 * =2: Chinese
972 )))
973 |=(% style="width: 160px;" %)HSW11756|(% style="width:282px" %)(((
974 Access permission restrictions
975
976 (ig series and** **8000/9000 series with -R after system upgrade)
977 )))|(% style="width:452px" %)(((
978 * =0: LAN or the external network both OK
979 * =1: Only LAN access
980 * =2: Only external network can access
981 )))
982 |=(% style="width: 160px;" %)HSW11757|(% style="width:282px" %)Enable the valid date of the dynamic installment password|(% style="width:452px" %)(((
983 * =0: Disabled
984 * =1: Enable
985 )))
986 |=(% style="width: 160px;" %)HSW11758|(% style="width:282px" %)Enable Screensaver|(% style="width:452px" %)(((
987 * =0: Disabled
988 * =1: Enable
989 )))
990 |=(% style="width: 160px;" %)HSW11759|(% style="width:282px" %)Screensaver interval time|(% style="width:452px" %)(((
991 Set the time how long will enter Screensaver (Range 10~~43200s)
992 )))
993 |=(% style="width: 160px;" %)HSW11760|(% style="width:282px" %)Screensaver countdown|(% style="width:452px" %)Display the countdown to enter the Screensaver, unit: second.
994 |=(% style="width: 160px;" %)HSW11761|(% style="width:282px" %)Screensaver screen number|(% style="width:452px" %)Set the screen number for Screensaver
995
996 == Serial port communication configuration ==
997
998 (% class="table-bordered" %)
999 |=(% scope="row" style="width: 102px;" %)Port|=(% style="width: 173px;" %)**Function**|=(% style="width: 122px;" %)**Address**|=(% colspan="2" style="width: 506px;" %)**Description**
1000 |(% colspan="1" rowspan="11" style="width:102px" %)COM1|(% style="width:173px" %)Communication mode|(% style="width:122px" %)HSW10061|(% colspan="2" style="width:506px" %)(((
1001 * =0: RS232
1002 * =1: RS485
1003 * =2: RS422
1004 )))
1005 |(% style="width:173px" %)Baud rate|(% style="width:122px" %)HSW10062|(% colspan="2" style="width:506px" %)(((
1006 * =0: 1200
1007 * =1: 2400
1008 * =2: 4800
1009 * =3: 9600
1010 * =4: 19200
1011 * =5: 38400
1012 * =6: 57600
1013 * =7: 115200
1014 * =8: 230400
1015 )))
1016 |(% style="width:173px" %)Data bit|(% style="width:122px" %)HSW10063|(% colspan="2" style="width:506px" %)(((
1017 * =7: 7 bit
1018 * =8: 8 bit
1019 )))
1020 |(% style="width:173px" %)Stop bit|(% style="width:122px" %)HSW10064|(% colspan="2" style="width:506px" %)(((
1021 * =1: 1 bit
1022 * =2: 2 bit
1023 )))
1024 |(% style="width:173px" %)Check bit|(% style="width:122px" %)HSW10065|(% colspan="2" style="width:506px" %)(((
1025 * =0: None
1026 * =1: ODD
1027 * =2: EVEN
1028 )))
1029 |(% style="width:173px" %)Wait timeout|(% style="width:122px" %)HSW10066|(% colspan="2" style="width:506px" %)(((
1030 * Unit: ms.
1031 * Range: 0 to 30000
1032 )))
1033 |(% style="width:173px" %)reveive timeout|(% style="width:122px" %)HSW10067|(% colspan="2" style="width:506px" %)(((
1034 * Unit: ms.
1035 * Range: 0 to 30000
1036 )))
1037 |(% style="width:173px" %)Retry time|(% style="width:122px" %)HSW10068|(% colspan="2" style="width:506px" %)(((
1038 * Unit: times.
1039 * Range: 0 to 100
1040 )))
1041 |(% style="width:173px" %)Retry timeout|(% style="width:122px" %)HSW10069|(% colspan="2" style="width:506px" %)(((
1042 * Unit: s.
1043 * Range: 0 to 300
1044 )))
1045 |(% style="width:173px" %)HMI station number|(% style="width:122px" %)HSW10070|(% colspan="2" style="width:506px" %)
1046 |(% style="width:173px" %)PLC station number|(% style="width:122px" %)HSW10071|(% colspan="2" style="width:506px" %)
1047 |(% colspan="1" rowspan="11" style="width:102px" %)COM1-2|(% style="width:173px" %)Communication mode|(% style="width:122px" %)HSW10094|(% colspan="2" style="width:506px" %)(((
1048 * =0: RS232
1049 * =1: RS485
1050 * =2: RS422
1051 * =6: RS485-2
1052 )))
1053 |(% style="width:173px" %)Baud rate|(% style="width:122px" %)HSW10095|(% colspan="2" style="width:506px" %)(((
1054 * =0: 1200
1055 * =1: 2400
1056 * =2: 4800
1057 * =3: 9600
1058 * =4: 19200
1059 * =5: 38400
1060 * =6: 57600
1061 * =7: 115200
1062 * =8: 230400
1063 )))
1064 |(% style="width:173px" %)Data bit|(% style="width:122px" %)HSW10096|(% colspan="2" style="width:506px" %)(((
1065 * =7: 7 bit
1066 * =8: 8 bit
1067 )))
1068 |(% style="width:173px" %)Stop bit|(% style="width:122px" %)HSW10097|(% colspan="2" style="width:506px" %)(((
1069 * =1: 1 bit
1070 * =2: 2 bit
1071 )))
1072 |(% style="width:173px" %)Check bit|(% style="width:122px" %)HSW10098|(% colspan="2" style="width:506px" %)(((
1073 * =0: None
1074 * =1: ODD
1075 * =2: EVEN
1076 )))
1077 |(% style="width:173px" %)Wait timeout|(% style="width:122px" %)HSW10099|(% colspan="2" style="width:506px" %)(((
1078 * Unit: ms.
1079 * Range: 0 to 30000
1080 )))
1081 |(% style="width:173px" %)receive timeout|(% style="width:122px" %)HSW10100|(% colspan="2" style="width:506px" %)(((
1082 * Unit: ms.
1083 * Range: 0 to 30000
1084 )))
1085 |(% style="width:173px" %)Retry time|(% style="width:122px" %)HSW10101|(% colspan="2" style="width:506px" %)(((
1086 * Unit: times.
1087 * Range: 0 to 100
1088 )))
1089 |(% style="width:173px" %)Retry timeout|(% style="width:122px" %)HSW10102|(% colspan="2" style="width:506px" %)(((
1090 * Unit: s.
1091 * Range: 0 to 30
1092 )))
1093 |(% style="width:173px" %)HMI station number|(% style="width:122px" %)HSW10103|(% colspan="2" style="width:506px" %)
1094 |(% style="width:173px" %)PLC station number|(% style="width:122px" %)HSW10104|(% colspan="2" style="width:506px" %)
1095 |(% colspan="1" rowspan="11" style="width:102px" %)COM1-3|(% style="width:173px" %)Communication mode|(% style="width:122px" %)HSW10120|(% colspan="2" style="width:506px" %)(((
1096 * =0: RS232
1097 * =1: RS485
1098 * =2: RS422
1099 * =6: RS485-2
1100 )))
1101 |(% style="width:173px" %)Baud rate|(% style="width:122px" %)HSW10121|(% colspan="2" style="width:506px" %)(((
1102 * =0: 1200
1103 * =1: 2400
1104 * =2: 4800
1105 * =3: 9600
1106 * =4: 19200
1107 * =5: 38400
1108 * =6: 57600
1109 * =7: 115200
1110 * =8: 230400
1111 )))
1112 |(% style="width:173px" %)Data bit|(% style="width:122px" %)HSW10122|(% colspan="2" style="width:506px" %)(((
1113 * =7: 7 bit
1114 * =8: 8 bit
1115 )))
1116 |(% style="width:173px" %)Stop bit|(% style="width:122px" %)HSW10123|(% colspan="2" style="width:506px" %)(((
1117 * =1: 1 bit
1118 * =2: 2 bit
1119 )))
1120 |(% style="width:173px" %)Check bit|(% style="width:122px" %)HSW10124|(% colspan="2" style="width:506px" %)(((
1121 * =0: None
1122 * =1: ODD
1123 * =2: EVEN
1124 )))
1125 |(% style="width:173px" %)Wait timeout|(% style="width:122px" %)HSW10125|(% colspan="2" style="width:506px" %)(((
1126 * Unit: ms.
1127 * Range: 0 to 30000
1128 )))
1129 |(% style="width:173px" %)receive timeout|(% style="width:122px" %)HSW10126|(% colspan="2" style="width:506px" %)(((
1130 * Unit: ms.
1131 * Range: 0 to 30000
1132 )))
1133 |(% style="width:173px" %)Retry time|(% style="width:122px" %)HSW10127|(% colspan="2" style="width:506px" %)(((
1134 * Unit: times.
1135 * Range: 0 to 100
1136 )))
1137 |(% style="width:173px" %)Retry timeout|(% style="width:122px" %)HSW10128|(% colspan="2" style="width:506px" %)(((
1138 * Unit: s.
1139 * Range: 0 to 30
1140 )))
1141 |(% style="width:173px" %)HMI station number|(% style="width:122px" %)HSW10129|(% colspan="2" style="width:506px" %)
1142 |(% style="width:173px" %)PLC station number|(% style="width:122px" %)HSW10130|(% colspan="2" style="width:506px" %)
1143 |(% colspan="1" rowspan="11" style="width:102px" %)COM2|(% style="width:173px" %)Communication mode|(% style="width:122px" %)HSW10072|(% colspan="2" style="width:506px" %)(((
1144 * =0: RS232
1145 * =1: RS485
1146 )))
1147 |(% style="width:173px" %)Baud rate|(% style="width:122px" %)HSW10073|(% colspan="2" style="width:506px" %)(((
1148 * =0: 1200
1149 * =1: 2400
1150 * =2: 4800
1151 * =3: 9600
1152 * =4: 19200
1153 * =5: 38400
1154 * =6: 57600
1155 * =7: 115200
1156 * =8: 230400
1157 )))
1158 |(% style="width:173px" %)Data bit|(% style="width:122px" %)HSW10074|(% colspan="2" style="width:506px" %)(((
1159 * =7: 7 bit
1160 * =8: 8 bit
1161 )))
1162 |(% style="width:173px" %)Stop bit|(% style="width:122px" %)HSW10075|(% colspan="2" style="width:506px" %)(((
1163 * =1: 1 bit
1164 * =2: 2 bit
1165 )))
1166 |(% style="width:173px" %)Check bit|(% style="width:122px" %)HSW10076|(% colspan="2" style="width:506px" %)(((
1167 * =0: None
1168 * =1: ODD
1169 * =2: EVEN
1170 )))
1171 |(% style="width:173px" %)Wait timeout|(% style="width:122px" %)HSW10077|(% colspan="2" style="width:506px" %)(((
1172 * Unit: ms.
1173 * Range: 0 to 30000
1174 )))
1175 |(% style="width:173px" %)receive timeout|(% style="width:122px" %)HSW10078|(% colspan="2" style="width:506px" %)(((
1176 * Unit: ms.
1177 * Range: 0 to 30000
1178 )))
1179 |(% style="width:173px" %)Retry time|(% style="width:122px" %)HSW10079|(% colspan="2" style="width:506px" %)(((
1180 * Unit: times.
1181 * Range: 0 to 100
1182 )))
1183 |(% style="width:173px" %)Retry timeout|(% style="width:122px" %)HSW10080|(% colspan="2" style="width:506px" %)(((
1184 * Unit: s.
1185 * Range: 0 to 30
1186 )))
1187 |(% style="width:173px" %)HMI station number|(% style="width:122px" %)HSW10081|(% colspan="2" style="width:506px" %)
1188 |(% style="width:173px" %)PLC station number|(% style="width:122px" %)HSW10082|(% colspan="2" style="width:506px" %)
1189 |(% colspan="1" rowspan="11" style="width:102px" %)COM2-2|(% style="width:173px" %)Communication mode|(% style="width:122px" %)HSW10105|(% colspan="2" style="width:506px" %)(((
1190 * =0: RS232
1191 * =1: RS485
1192 )))
1193 |(% style="width:173px" %)Baud rate|(% style="width:122px" %)HSW10106|(% colspan="2" style="width:506px" %)(((
1194 * =0: 1200
1195 * =1: 2400
1196 * =2: 4800
1197 * =3: 9600
1198 * =4: 19200
1199 * =5: 38400
1200 * =6: 57600
1201 * =7: 115200
1202 * =8: 230400
1203 )))
1204 |(% style="width:173px" %)Data bit|(% style="width:122px" %)HSW10107|(% colspan="2" style="width:506px" %)(((
1205 * =7: 7 bit
1206 * =8: 8 bit
1207 )))
1208 |(% style="width:173px" %)Stop bit|(% style="width:122px" %)HSW10108|(% colspan="2" style="width:506px" %)(((
1209 * =1: 1 bit
1210 * =2: 2 bit
1211 )))
1212 |(% style="width:173px" %)Check bit|(% style="width:122px" %)HSW10109|(% colspan="2" style="width:506px" %)(((
1213 * =0: None
1214 * =1: ODD
1215 * =2: EVEN
1216 )))
1217 |(% style="width:173px" %)Wait timeout|(% style="width:122px" %)HSW10110|(% colspan="2" style="width:506px" %)(((
1218 * Unit: ms.
1219 * Range: 0 to 30000
1220 )))
1221 |(% style="width:173px" %)receive timeout|(% style="width:122px" %)HSW10111|(% colspan="2" style="width:506px" %)(((
1222 * Unit: ms.
1223 * Range: 0 to 30000
1224 )))
1225 |(% style="width:173px" %)Retry time|(% style="width:122px" %)HSW10112|(% colspan="2" style="width:506px" %)(((
1226 * Unit: times.
1227 * Range: 0 to 100
1228 )))
1229 |(% style="width:173px" %)Retry timeout|(% style="width:122px" %)HSW10113|(% colspan="2" style="width:506px" %)(((
1230 * Unit: s.
1231 * Range: 0 to 30
1232 )))
1233 |(% style="width:173px" %)HMI station number|(% style="width:122px" %)HSW10114|(% colspan="2" style="width:506px" %)
1234 |(% style="width:173px" %)PLC station number|(% style="width:122px" %)HSW10115|(% colspan="2" style="width:506px" %)
1235 |(% colspan="1" rowspan="11" style="width:102px" %)COM3|(% style="width:173px" %)Communication mode|(% style="width:122px" %)HSW10083|(% colspan="2" style="width:506px" %)(((
1236 * =1: RS485
1237 )))
1238 |(% style="width:173px" %)Baud rate|(% style="width:122px" %)HSW10084|(% colspan="2" style="width:506px" %)(((
1239 * =0: 1200
1240 * =1: 2400
1241 * =2: 4800
1242 * =3: 9600
1243 * =4: 19200
1244 * =5: 38400
1245 * =6: 57600
1246 * =7: 115200
1247 * =8: 230400
1248 )))
1249 |(% style="width:173px" %)Data bit|(% style="width:122px" %)HSW10085|(% colspan="2" style="width:506px" %)(((
1250 * =7: 7 bit
1251 * =8: 8 bit
1252 )))
1253 |(% style="width:173px" %)Stop bit|(% style="width:122px" %)HSW10086|(% colspan="2" style="width:506px" %)(((
1254 * =1: 1 bit
1255 * =2: 2 bit
1256 )))
1257 |(% style="width:173px" %)Check bit|(% style="width:122px" %)HSW10087|(% colspan="2" style="width:506px" %)(((
1258 * =0: None
1259 * =1: ODD
1260 * =2: EVEN
1261 )))
1262 |(% style="width:173px" %)Wait timeout|(% style="width:122px" %)HSW10088|(% colspan="2" style="width:506px" %)(((
1263 * Unit: ms.
1264 * Range: 0 to 30000
1265 )))
1266 |(% style="width:173px" %)receive timeout|(% style="width:122px" %)HSW10089|(% colspan="2" style="width:506px" %)(((
1267 * Unit: ms.
1268 * Range: 0 to 30000
1269 )))
1270 |(% style="width:173px" %)Retry time|(% style="width:122px" %)HSW10090|(% colspan="2" style="width:506px" %)(((
1271 * Unit: times.
1272 * Range: 0 to 100
1273 )))
1274 |(% style="width:173px" %)Retry timeout|(% style="width:122px" %)HSW10091|(% colspan="2" style="width:506px" %)(((
1275 * Unit: s.
1276 * Range: 0 to 30
1277 )))
1278 |(% style="width:173px" %)HMI station number|(% style="width:122px" %)HSW10092|(% colspan="2" style="width:506px" %)
1279 |(% style="width:173px" %)PLC station number|(% style="width:122px" %)HSW10093|(% colspan="2" style="width:506px" %)
1280 |(% colspan="1" rowspan="2" style="width:102px" %)CAN port|(% style="width:173px" %)CAN1 baud rate|(% style="width:122px" %)HSW010116|(% style="width:299px" %)(((
1281 Unit: K, the baud rate must be an integer.
1282
1283 For example, when the baud rate required is 250000, just enter 250.
1284 )))|(% colspan="1" rowspan="2" style="width:218px" %)**✎Note: **If baud rate has been modified,please wait 5 seconds,then restart the HMI to take effect.
1285 |(% style="width:173px" %)CAN2 baud rate|(% style="width:122px" %)HSW010117|(% style="width:299px" %)(((
1286 Unit: K, the baud rate must be an integer.
1287
1288 For example, when the baud rate required is 250000, just enter 250.
1289 )))
1290
1291 == Ethernet communication configuration ==
1292
1293 (% class="table-bordered" %)
1294 |(% style="width:40px" %)**No.**|(% style="width:295px" %)**Function**|(% style="width:220px" %)**Address**|(% style="width:336px" %)**Description**
1295 |(% rowspan="7" style="width:40px" %)1|(% colspan="1" rowspan="7" style="width:295px" %)Ethernet parameter configuration for communication number 1 in list. Configure those addresses according to connected device. After configuration, wait for 5 seconds and restart the HMI.|(% style="width:220px" %)HSW11004|(% style="width:336px" %)Device IP address high word 1
1296 |(% style="width:220px" %)HSW11005|(% style="width:336px" %)Device IP address high word 2
1297 |(% style="width:220px" %)HSW11006|(% style="width:336px" %)Device IP address high word 3
1298 |(% style="width:220px" %)HSW11007|(% style="width:336px" %)Device IP address high word 4
1299 |(% style="width:220px" %)HSW11008|(% style="width:336px" %)Device Port number
1300 |(% style="width:220px" %)HSW11009|(% style="width:336px" %)(((
1301 ~=2 TCP
1302
1303 ~=3 UDP
1304 )))
1305 |(% style="width:220px" %)HSW11010|(% style="width:336px" %)Reserved
1306 |(% rowspan="7" style="width:40px" %)2|(% colspan="1" rowspan="7" style="width:295px" %)Ethernet parameter configuration for communication number 2 in list. Configure those addresses according to connected device. After configuration, wait for 5 seconds and restart the HMI.|(% style="width:220px" %)HSW11011|(% style="width:336px" %)Device IP address high word 1
1307 |(% style="width:220px" %)HSW11012|(% style="width:336px" %)Device IP address high word 2
1308 |(% style="width:220px" %)HSW11013|(% style="width:336px" %)Device IP address high word 3
1309 |(% style="width:220px" %)HSW11014|(% style="width:336px" %)Device IP address high word 4
1310 |(% style="width:220px" %)HSW11015|(% style="width:336px" %)Device Port number
1311 |(% style="width:220px" %)HSW11016|(% style="width:336px" %)(((
1312 ~=2 TCP
1313
1314 ~=3 UDP
1315 )))
1316 |(% style="width:220px" %)HSW11017|(% style="width:336px" %)Reserved
1317 |(% style="width:40px" %)…|(% style="width:295px" %) |(% style="width:220px" %)…|(% style="width:336px" %)…
1318 |(% rowspan="7" style="width:40px" %)32|(% colspan="1" rowspan="7" style="width:295px" %)Ethernet parameter configuration for communication number 32 in list. Configure those addresses according to connected device. After configuration, wait for 5 seconds and restart the HMI.|(% style="width:220px" %)HSW11221|(% style="width:336px" %)Device IP address high word 1
1319 |(% style="width:220px" %)HSW11222|(% style="width:336px" %)Device IP address high word 2
1320 |(% style="width:220px" %)HSW11223|(% style="width:336px" %)Device IP address high word 3
1321 |(% style="width:220px" %)HSW11224|(% style="width:336px" %)Device IP address high word 4
1322 |(% style="width:220px" %)HSW11225|(% style="width:336px" %)Device Port number
1323 |(% style="width:220px" %)HSW11226|(% style="width:336px" %)(((
1324 ~=2 TCP;
1325
1326 ~=3 UDP
1327 )))
1328 |(% style="width:220px" %)HSW11227|(% style="width:336px" %)Reserved
1329
1330 (% class="box infomessage" %)
1331 (((
1332 **✎Note:** The number of Ethernet connections supported by different HMI series varies.
1333 )))
1334
1335 == Communication control ==
1336
1337 (% class="table-bordered" %)
1338 |=(% style="width: 135px;" %)**Communication No.**|=(% style="width: 102px;" %)**Station No.**|=(% style="width: 185px;" %)**Control bit**|=(% style="width: 191px;" %)**Communication lamp**|=(% style="width: 271px;" %)**Description**
1339 |(% colspan="1" rowspan="16" style="width:135px" %)1|(% style="width:102px" %)0~~15|(% style="width:185px" %)HSX550.0～HSX550.15|(% style="width:191px" %)HSX558.0～HSX558.15|(% rowspan="160" style="width:271px" %)Communication number refers to the number in "Communication Port Configuration". A number provides 256 device station numbers. Each station number corresponds to a communication control bit and a communication indicator bit. Registers HSX550.0 to HSX805.15 are used to control the station numbers from 0 to 127, and registers HSX1150.0 to HSX1405.15 are used to control station numbers 128 to 255.
1340 |(% style="width:102px" %)16~~31|(% style="width:185px" %)HSX551.0～HSX551.15|(% style="width:191px" %)HSX559.0～HSX559.15
1341 |(% style="width:102px" %)32~~47|(% style="width:185px" %)HSX552.0～HSX552.15|(% style="width:191px" %)HSX560.0～HSX560.15
1342 |(% style="width:102px" %)48~~63|(% style="width:185px" %)HSX553.0～HSX553.15|(% style="width:191px" %)HSX561.0～HSX561.15
1343 |(% style="width:102px" %)64～79|(% style="width:185px" %)HSX554.0～HSX554.15|(% style="width:191px" %)HSX562.0～HSX562.15
1344 |(% style="width:102px" %)80～95|(% style="width:185px" %)HSX555.0～HSX555.15|(% style="width:191px" %)HSX563.0～HSX563.15
1345 |(% style="width:102px" %)96～111|(% style="width:185px" %)HSX556.0～HSX556.15|(% style="width:191px" %)HSX564.0～HSX564.15
1346 |(% style="width:102px" %)112～127|(% style="width:185px" %)HSX557.0～HSX557.15|(% style="width:191px" %)HSX565.0～HSX565.15
1347 |(% style="width:102px" %)128～143|(% style="width:185px" %)HSX1150.0～HSX1150.15|(% style="width:191px" %)HSX1158.0～HSX1158.15
1348 |(% style="width:102px" %)144～159|(% style="width:185px" %)HSX1151.0～HSX1151.15|(% style="width:191px" %)HSX1159.0～HSX1159.15
1349 |(% style="width:102px" %)160～175|(% style="width:185px" %)HSX1152.0～HSX1152.15|(% style="width:191px" %)HSX1160.0～HSX1160.15
1350 |(% style="width:102px" %)176～191|(% style="width:185px" %)HSX1153.0～HSX1153.15|(% style="width:191px" %)HSX1161.0～HSX1161.15
1351 |(% style="width:102px" %)192～207|(% style="width:185px" %)HSX1154.0～HSX1154.15|(% style="width:191px" %)HSX1162.0～HSX1162.15
1352 |(% style="width:102px" %)208～223|(% style="width:185px" %)HSX1155.0～HSX1155.15|(% style="width:191px" %)HSX1163.0～HSX1163.15
1353 |(% style="width:102px" %)224～239|(% style="width:185px" %)HSX1156.0～HSX1156.15|(% style="width:191px" %)HSX1164.0～HSX1164.15
1354 |(% style="width:102px" %)240～255|(% style="width:185px" %)HSX1157.0～HSX1157.15|(% style="width:191px" %)HSX1165.0～HSX1165.15
1355 |(% colspan="1" rowspan="16" style="width:135px" %)2|(% style="width:102px" %)0～15|(% style="width:185px" %)HSX566.0～HSX566.15|(% style="width:191px" %)HSX574.0～HSX574.15
1356 |(% style="width:102px" %)16～31|(% style="width:185px" %)HSX567.0～HSX567.15|(% style="width:191px" %)HSX575.0～HSX575.15
1357 |(% style="width:102px" %)32～47|(% style="width:185px" %)HSX568.0～HSX568.15|(% style="width:191px" %)HSX576.0～HSX576.15
1358 |(% style="width:102px" %)48～63|(% style="width:185px" %)HSX569.0～HSX569.15|(% style="width:191px" %)HSX577.0～HSX577.15
1359 |(% style="width:102px" %)64～79|(% style="width:185px" %)HSX570.0～HSX570.15|(% style="width:191px" %)HSX578.0～HSX578.15
1360 |(% style="width:102px" %)80～95|(% style="width:185px" %)HSX571.0～HSX571.15|(% style="width:191px" %)HSX579.0～HSX579.15
1361 |(% style="width:102px" %)96～111|(% style="width:185px" %)HSX572.0～HSX572.15|(% style="width:191px" %)HSX580.0～HSX580.15
1362 |(% style="width:102px" %)112～127|(% style="width:185px" %)HSX573.0～HSX573.15|(% style="width:191px" %)HSX581.0～HSX581.15
1363 |(% style="width:102px" %)128～143|(% style="width:185px" %)HSX1166.0～HSX1166.15|(% style="width:191px" %)HSX1174.0～HSX1174.15
1364 |(% style="width:102px" %)144～159|(% style="width:185px" %)HSX1167.0～HSX1167.15|(% style="width:191px" %)HSX1175.0～HSX1175.15
1365 |(% style="width:102px" %)160～175|(% style="width:185px" %)HSX1168.0～HSX1168.15|(% style="width:191px" %)HSX1176.0～HSX1176.15
1366 |(% style="width:102px" %)176～191|(% style="width:185px" %)HSX1169.0～HSX1169.15|(% style="width:191px" %)HSX1177.0～HSX1177.15
1367 |(% style="width:102px" %)192～207|(% style="width:185px" %)HSX1170.0～HSX1170.15|(% style="width:191px" %)HSX1178.0～HSX1178.15
1368 |(% style="width:102px" %)208～223|(% style="width:185px" %)HSX1171.0～HSX1171.15|(% style="width:191px" %)HSX1179.0～HSX1179.15
1369 |(% style="width:102px" %)224～239|(% style="width:185px" %)HSX1172.0～HSX1172.15|(% style="width:191px" %)HSX1180.0～HSX1180.15
1370 |(% style="width:102px" %)240～255|(% style="width:185px" %)HSX1173.0～HSX1173.15|(% style="width:191px" %)HSX1181.0～HSX1181.15
1371 |(% colspan="1" rowspan="16" style="width:135px" %)3|(% style="width:102px" %)0～15|(% style="width:185px" %)HSX582.0～HSX582.15|(% style="width:191px" %)HSX590.0～HSX590.15
1372 |(% style="width:102px" %)16～31|(% style="width:185px" %)HSX583.0～HSX583.15|(% style="width:191px" %)HSX591.0～HSX591.15
1373 |(% style="width:102px" %)32～47|(% style="width:185px" %)HSX584.0～HSX584.15|(% style="width:191px" %)HSX592.0～HSX592.15
1374 |(% style="width:102px" %)48～63|(% style="width:185px" %)HSX585.0～HSX585.15|(% style="width:191px" %)HSX593.0～HSX593.15
1375 |(% style="width:102px" %)64～79|(% style="width:185px" %)HSX586.0～HSX586.15|(% style="width:191px" %)HSX594.0～HSX594.15
1376 |(% style="width:102px" %)80～95|(% style="width:185px" %)HSX587.0～HSX587.15|(% style="width:191px" %)HSX595.0～HSX595.15
1377 |(% style="width:102px" %)96～111|(% style="width:185px" %)HSX588.0～HSX588.15|(% style="width:191px" %)HSX596.0～HSX596.15
1378 |(% style="width:102px" %)112～127|(% style="width:185px" %)HSX589.0～HSX589.15|(% style="width:191px" %)HSX597.0～HSX597.15
1379 |(% style="width:102px" %)128～143|(% style="width:185px" %)HSX1182.0～HSX1182.15|(% style="width:191px" %)HSX1190.0～HSX1190.15
1380 |(% style="width:102px" %)144～159|(% style="width:185px" %)HSX1183.0～HSX1183.15|(% style="width:191px" %)HSX1191.0～HSX1191.15
1381 |(% style="width:102px" %)160～175|(% style="width:185px" %)HSX1184.0～HSX1184.15|(% style="width:191px" %)HSX1192.0～HSX1192.15
1382 |(% style="width:102px" %)176～191|(% style="width:185px" %)HSX1185.0～HSX1185.15|(% style="width:191px" %)HSX1193.0～HSX1193.15
1383 |(% style="width:102px" %)192～207|(% style="width:185px" %)HSX1186.0～HSX1186.15|(% style="width:191px" %)HSX1194.0～HSX1194.15
1384 |(% style="width:102px" %)208～223|(% style="width:185px" %)HSX1187.0～HSX1187.15|(% style="width:191px" %)HSX1195.0～HSX1195.15
1385 |(% style="width:102px" %)224～239|(% style="width:185px" %)HSX1188.0～HSX1188.15|(% style="width:191px" %)HSX1196.0～HSX1196.15
1386 |(% style="width:102px" %)240～255|(% style="width:185px" %)HSX1189.0～HSX1189.15|(% style="width:191px" %)HSX1197.0～HSX1197.15
1387 |(% colspan="1" rowspan="16" style="width:135px" %)4|(% style="width:102px" %)0～15|(% style="width:185px" %)HSX598.0～HSX598.15|(% style="width:191px" %)HSX606.0～HSX606.15
1388 |(% style="width:102px" %)16～31|(% style="width:185px" %)HSX599.0～HSX599.15|(% style="width:191px" %)HSX607.0～HSX607.15
1389 |(% style="width:102px" %)32～47|(% style="width:185px" %)HSX600.0～HSX600.15|(% style="width:191px" %)HSX608.0～HSX608.15
1390 |(% style="width:102px" %)48～63|(% style="width:185px" %)HSX601.0～HSX601.15|(% style="width:191px" %)HSX609.0～HSX609.15
1391 |(% style="width:102px" %)64～79|(% style="width:185px" %)HSX602.0～HSX602.15|(% style="width:191px" %)HSX610.0～HSX610.15
1392 |(% style="width:102px" %)80～95|(% style="width:185px" %)HSX603.0～HSX603.15|(% style="width:191px" %)HSX611.0～HSX611.15
1393 |(% style="width:102px" %)96～111|(% style="width:185px" %)HSX604.0～HSX604.15|(% style="width:191px" %)HSX612.0～HSX612.15
1394 |(% style="width:102px" %)112～127|(% style="width:185px" %)HSX605.0～HSX605.15|(% style="width:191px" %)HSX613.0～HSX613.15
1395 |(% style="width:102px" %)128～143|(% style="width:185px" %)HSX1198.0～HSX1198.15|(% style="width:191px" %)HSX1206.0～HSX1206.15
1396 |(% style="width:102px" %)144～159|(% style="width:185px" %)HSX1199.0～HSX1199.15|(% style="width:191px" %)HSX1207.0～HSX1207.15
1397 |(% style="width:102px" %)160～175|(% style="width:185px" %)HSX1200.0～HSX1200.15|(% style="width:191px" %)HSX1208.0～HSX1208.15
1398 |(% style="width:102px" %)176～191|(% style="width:185px" %)HSX1201.0～HSX1201.15|(% style="width:191px" %)HSX1209.0～HSX1209.15
1399 |(% style="width:102px" %)192～207|(% style="width:185px" %)HSX1202.0～HSX1202.15|(% style="width:191px" %)HSX1210.0～HSX1210.15
1400 |(% style="width:102px" %)208～223|(% style="width:185px" %)HSX1203.0～HSX1203.15|(% style="width:191px" %)HSX1211.0～HSX1211.15
1401 |(% style="width:102px" %)224～239|(% style="width:185px" %)HSX1204.0～HSX1204.15|(% style="width:191px" %)HSX1212.0～HSX1212.15
1402 |(% style="width:102px" %)240～255|(% style="width:185px" %)HSX1205.0～HSX1205.15|(% style="width:191px" %)HSX1213.0～HSX1213.15
1403 |(% colspan="1" rowspan="16" style="width:135px" %)5|(% style="width:102px" %)0～15|(% style="width:185px" %)HSX614.0～HSX614.15|(% style="width:191px" %)HSX622.0～HSX622.15
1404 |(% style="width:102px" %)16～31|(% style="width:185px" %)HSX615.0～HSX615.15|(% style="width:191px" %)HSX623.0～HSX623.15
1405 |(% style="width:102px" %)32～47|(% style="width:185px" %)HSX616.0～HSX616.15|(% style="width:191px" %)HSX624.0～HSX624.15
1406 |(% style="width:102px" %)48～63|(% style="width:185px" %)HSX617.0～HSX617.15|(% style="width:191px" %)HSX625.0～HSX625.15
1407 |(% style="width:102px" %)64～79|(% style="width:185px" %)HSX618.0～HSX618.15|(% style="width:191px" %)HSX626.0～HSX626.15
1408 |(% style="width:102px" %)80～95|(% style="width:185px" %)HSX619.0～HSX619.15|(% style="width:191px" %)HSX627.0～HSX627.15
1409 |(% style="width:102px" %)96～111|(% style="width:185px" %)HSX620.0～HSX620.15|(% style="width:191px" %)HSX628.0～HSX628.15
1410 |(% style="width:102px" %)112～127|(% style="width:185px" %)HSX621.0～HSX621.15|(% style="width:191px" %)HSX629.0～HSX629.15
1411 |(% style="width:102px" %)128～143|(% style="width:185px" %)HSX1214.0～HSX1214.15|(% style="width:191px" %)HSX1222.0～HSX1222.15
1412 |(% style="width:102px" %)144～159|(% style="width:185px" %)HSX1215.0～HSX1215.15|(% style="width:191px" %)HSX1223.0～HSX1223.15
1413 |(% style="width:102px" %)160～175|(% style="width:185px" %)HSX1216.0～HSX1216.15|(% style="width:191px" %)HSX1224.0～HSX1224.15
1414 |(% style="width:102px" %)176～191|(% style="width:185px" %)HSX1217.0～HSX1217.15|(% style="width:191px" %)HSX1225.0～HSX1225.15
1415 |(% style="width:102px" %)192～207|(% style="width:185px" %)HSX1218.0～HSX1218.15|(% style="width:191px" %)HSX1226.0～HSX1226.15
1416 |(% style="width:102px" %)208～223|(% style="width:185px" %)HSX1219.0～HSX1219.15|(% style="width:191px" %)HSX1227.0～HSX1227.15
1417 |(% style="width:102px" %)224～239|(% style="width:185px" %)HSX1220.0～HSX1220.15|(% style="width:191px" %)HSX1228.0～HSX1228.15
1418 |(% style="width:102px" %)240～255|(% style="width:185px" %)HSX1221.0～HSX1221.15|(% style="width:191px" %)HSX1229.0～HSX1229.15
1419 |(% colspan="1" rowspan="16" style="width:135px" %)6|(% style="width:102px" %)0～15|(% style="width:185px" %)HSX630.0～HSX630.15|(% style="width:191px" %)HSX638.0～HSX638.15
1420 |(% style="width:102px" %)16～31|(% style="width:185px" %)HSX631.0～HSX631.15|(% style="width:191px" %)HSX639.0～HSX639.15
1421 |(% style="width:102px" %)32～47|(% style="width:185px" %)HSX632.0～HSX632.15|(% style="width:191px" %)HSX640.0～HSX640.15
1422 |(% style="width:102px" %)48～63|(% style="width:185px" %)HSX633.0～HSX633.15|(% style="width:191px" %)HSX641.0～HSX641.15
1423 |(% style="width:102px" %)64～79|(% style="width:185px" %)HSX634.0～HSX634.15|(% style="width:191px" %)HSX642.0～HSX642.15
1424 |(% style="width:102px" %)80～95|(% style="width:185px" %)HSX635.0～HSX635.15|(% style="width:191px" %)HSX643.0～HSX643.15
1425 |(% style="width:102px" %)96～111|(% style="width:185px" %)HSX636.0～HSX636.15|(% style="width:191px" %)HSX644.0～HSX644.15
1426 |(% style="width:102px" %)112～127|(% style="width:185px" %)HSX637.0～HSX637.15|(% style="width:191px" %)HSX645.0～HSX645.15
1427 |(% style="width:102px" %)128～143|(% style="width:185px" %)HSX1230.0～HSX1230.15|(% style="width:191px" %)HSX1238.0～HSX1238.15
1428 |(% style="width:102px" %)144～159|(% style="width:185px" %)HSX1231.0～HSX1231.15|(% style="width:191px" %)HSX1239.0～HSX1239.15
1429 |(% style="width:102px" %)160～175|(% style="width:185px" %)HSX1232.0～HSX1232.15|(% style="width:191px" %)HSX1240.0～HSX1240.15
1430 |(% style="width:102px" %)176～191|(% style="width:185px" %)HSX1233.0～HSX1233.15|(% style="width:191px" %)HSX1241.0～HSX1241.15
1431 |(% style="width:102px" %)192～207|(% style="width:185px" %)HSX1234.0～HSX1234.15|(% style="width:191px" %)HSX1242.0～HSX1242.15
1432 |(% style="width:102px" %)208～223|(% style="width:185px" %)HSX1235.0～HSX1235.15|(% style="width:191px" %)HSX1243.0～HSX1243.15
1433 |(% style="width:102px" %)224～239|(% style="width:185px" %)HSX1236.0～HSX1236.15|(% style="width:191px" %)HSX1244.0～HSX1244.15
1434 |(% style="width:102px" %)240～255|(% style="width:185px" %)HSX1237.0～HSX1237.15|(% style="width:191px" %)HSX1245.0～HSX1245.15
1435 |(% colspan="1" rowspan="16" style="width:135px" %)7|(% style="width:102px" %)0～15|(% style="width:185px" %)HSX646.0～HSX646.15|(% style="width:191px" %)HSX654.0～HSX654.15
1436 |(% style="width:102px" %)16～31|(% style="width:185px" %)HSX647.0～HSX647.15|(% style="width:191px" %)HSX655.0～HSX655.15
1437 |(% style="width:102px" %)32～47|(% style="width:185px" %)HSX648.0～HSX648.15|(% style="width:191px" %)HSX656.0～HSX656.15
1438 |(% style="width:102px" %)48～63|(% style="width:185px" %)HSX649.0～HSX649.15|(% style="width:191px" %)HSX657.0～HSX657.15
1439 |(% style="width:102px" %)64～79|(% style="width:185px" %)HSX650.0～HSX650.15|(% style="width:191px" %)HSX658.0～HSX658.15
1440 |(% style="width:102px" %)80～95|(% style="width:185px" %)HSX651.0～HSX651.15|(% style="width:191px" %)HSX659.0～HSX659.15
1441 |(% style="width:102px" %)96～111|(% style="width:185px" %)HSX652.0～HSX652.15|(% style="width:191px" %)HSX660.0～HSX660.15
1442 |(% style="width:102px" %)112～127|(% style="width:185px" %)HSX653.0～HSX653.15|(% style="width:191px" %)HSX661.0～HSX661.15
1443 |(% style="width:102px" %)128～143|(% style="width:185px" %)HSX1246.0～HSX1246.15|(% style="width:191px" %)HSX1254.0～HSX1254.15
1444 |(% style="width:102px" %)144～159|(% style="width:185px" %)HSX1247.0～HSX1247.15|(% style="width:191px" %)HSX1255.0～HSX1255.15
1445 |(% style="width:102px" %)160～175|(% style="width:185px" %)HSX1248.0～HSX1248.15|(% style="width:191px" %)HSX1256.0～HSX1256.15
1446 |(% style="width:102px" %)176～191|(% style="width:185px" %)HSX1249.0～HSX1249.15|(% style="width:191px" %)HSX1257.0～HSX1257.15
1447 |(% style="width:102px" %)192～207|(% style="width:185px" %)HSX1250.0～HSX1250.15|(% style="width:191px" %)HSX1258.0～HSX1258.15
1448 |(% style="width:102px" %)208～223|(% style="width:185px" %)HSX1251.0～HSX1251.15|(% style="width:191px" %)HSX1259.0～HSX1259.15
1449 |(% style="width:102px" %)224～239|(% style="width:185px" %)HSX1252.0～HSX1252.15|(% style="width:191px" %)HSX1260.0～HSX1260.15
1450 |(% style="width:102px" %)240～255|(% style="width:185px" %)HSX1253.0～HSX1253.15|(% style="width:191px" %)HSX1261.0～HSX1261.15
1451 |(% colspan="1" rowspan="16" style="width:135px" %)8|(% style="width:102px" %)0～15|(% style="width:185px" %)HSX662.0～HSX662.15|(% style="width:191px" %)HSX670.0～HSX670.15
1452 |(% style="width:102px" %)16～31|(% style="width:185px" %)HSX663.0～HSX663.15|(% style="width:191px" %)HSX671.0～HSX671.15
1453 |(% style="width:102px" %)32～47|(% style="width:185px" %)HSX664.0～HSX664.15|(% style="width:191px" %)HSX672.0～HSX672.15
1454 |(% style="width:102px" %)48～63|(% style="width:185px" %)HSX665.0～HSX665.15|(% style="width:191px" %)HSX673.0～HSX673.15
1455 |(% style="width:102px" %)64～79|(% style="width:185px" %)HSX666.0～HSX666.15|(% style="width:191px" %)HSX674.0～HSX674.15
1456 |(% style="width:102px" %)80～95|(% style="width:185px" %)HSX667.0～HSX667.15|(% style="width:191px" %)HSX675.0～HSX675.15
1457 |(% style="width:102px" %)96～111|(% style="width:185px" %)HSX668.0～HSX668.15|(% style="width:191px" %)HSX676.0～HSX676.15
1458 |(% style="width:102px" %)112～127|(% style="width:185px" %)HSX669.0～HSX669.15|(% style="width:191px" %)HSX677.0～HSX677.15
1459 |(% style="width:102px" %)128～143|(% style="width:185px" %)HSX1262.0～HSX1262.15|(% style="width:191px" %)HSX1270.0～HSX1270.15
1460 |(% style="width:102px" %)144～159|(% style="width:185px" %)HSX1263.0～HSX1263.15|(% style="width:191px" %)HSX1271.0～HSX1271.15
1461 |(% style="width:102px" %)160～175|(% style="width:185px" %)HSX1264.0～HSX1264.15|(% style="width:191px" %)HSX1272.0～HSX1272.15
1462 |(% style="width:102px" %)176～191|(% style="width:185px" %)HSX1265.0～HSX1265.15|(% style="width:191px" %)HSX1273.0～HSX1273.15
1463 |(% style="width:102px" %)192～207|(% style="width:185px" %)HSX1266.0～HSX1266.15|(% style="width:191px" %)HSX1274.0～HSX1274.15
1464 |(% style="width:102px" %)208～223|(% style="width:185px" %)HSX1267.0～HSX1267.15|(% style="width:191px" %)HSX1275.0～HSX1275.15
1465 |(% style="width:102px" %)224～239|(% style="width:185px" %)HSX1268.0～HSX1268.15|(% style="width:191px" %)HSX1276.0～HSX1276.15
1466 |(% style="width:102px" %)240～255|(% style="width:185px" %)HSX1269.0～HSX1269.15|(% style="width:191px" %)HSX1277.0～HSX1277.15
1467 |(% rowspan="4" style="width:135px" %)9|(% style="width:102px" %)0~~15|(% style="width:185px" %)HSX678.0~~678.15|(% style="width:191px" %)HSX686.0~~686.15
1468 |(% style="width:102px" %)16~~31|(% style="width:185px" %)HSX679.0~~679.15|(% style="width:191px" %)HSX687.0~~687.15
1469 |(% style="width:102px" %)32~~47|(% style="width:185px" %)HSX680.0~~680.15|(% style="width:191px" %)HSX688.0~~688.15
1470 |(% style="width:102px" %)48~~63|(% style="width:185px" %)HSX681.0~~681.15|(% style="width:191px" %)HSX689.0~~689.15
1471 |(% rowspan="4" style="width:135px" %)10|(% style="width:102px" %)0~~15|(% style="width:185px" %)HSX694.0~~694.15|(% style="width:191px" %)HSX702.0~~702.15
1472 |(% style="width:102px" %)16~~31|(% style="width:185px" %)HSX695.0~~695.15|(% style="width:191px" %)HSX703.0~~703.15
1473 |(% style="width:102px" %)32~~47|(% style="width:185px" %)HSX696.0~~696.15|(% style="width:191px" %)HSX704.0~~704.15
1474 |(% style="width:102px" %)48~~63|(% style="width:185px" %)HSX697.0~~697.15|(% style="width:191px" %)HSX705.0~~705.15
1475 |(% rowspan="4" style="width:135px" %)11|(% style="width:102px" %)0~~15|(% style="width:185px" %)HSX710.0~~710.15|(% style="width:191px" %)HSX718.0~~718.15
1476 |(% style="width:102px" %)16~~31|(% style="width:185px" %)HSX711.0~~711.15|(% style="width:191px" %)HSX719.0~~719.15
1477 |(% style="width:102px" %)32~~47|(% style="width:185px" %)HSX712.0~~712.15|(% style="width:191px" %)HSX720.0~~720.15
1478 |(% style="width:102px" %)48~~63|(% style="width:185px" %)HSX713.0~~713.15|(% style="width:191px" %)HSX721.0~~721.15
1479 |(% rowspan="4" style="width:135px" %)12|(% style="width:102px" %)0~~15|(% style="width:185px" %)HSX726.0~~726.15|(% style="width:191px" %)HSX734.0~~734.15
1480 |(% style="width:102px" %)16~~31|(% style="width:185px" %)HSX727.0~~727.15|(% style="width:191px" %)HSX735.0~~735.15
1481 |(% style="width:102px" %)32~~47|(% style="width:185px" %)HSX728.0~~728.15|(% style="width:191px" %)HSX736.0~~736.15
1482 |(% style="width:102px" %)48~~63|(% style="width:185px" %)HSX729.0~~729.15|(% style="width:191px" %)HSX737.0~~737.15
1483 |(% rowspan="4" style="width:135px" %)13|(% style="width:102px" %)0~~15|(% style="width:185px" %)HSX742.0~~742.15|(% style="width:191px" %)HSX750.0~~750.15
1484 |(% style="width:102px" %)16~~31|(% style="width:185px" %)HSX743.0~~743.15|(% style="width:191px" %)HSX751.0~~751.15
1485 |(% style="width:102px" %)32~~47|(% style="width:185px" %)HSX744.0~~744.15|(% style="width:191px" %)HSX752.0~~752.15
1486 |(% style="width:102px" %)48~~63|(% style="width:185px" %)HSX745.0~~745.15|(% style="width:191px" %)HSX753.0~~753.15
1487 |(% rowspan="4" style="width:135px" %)14|(% style="width:102px" %)0~~15|(% style="width:185px" %)HSX758.0~~758.15|(% style="width:191px" %)HSX766.0~~766.15
1488 |(% style="width:102px" %)16~~31|(% style="width:185px" %)HSX759.0~~759.15|(% style="width:191px" %)HSX767.0~~767.15
1489 |(% style="width:102px" %)32~~47|(% style="width:185px" %)HSX760.0~~760.15|(% style="width:191px" %)HSX768.0~~768.15
1490 |(% style="width:102px" %)48~~63|(% style="width:185px" %)HSX761.0~~761.15|(% style="width:191px" %)HSX769.0~~769.15
1491 |(% rowspan="4" style="width:135px" %)15|(% style="width:102px" %)0~~15|(% style="width:185px" %)HSX774.0~~774.15|(% style="width:191px" %)HSX782.0~~782.15
1492 |(% style="width:102px" %)16~~31|(% style="width:185px" %)HSX775.0~~775.15|(% style="width:191px" %)HSX783.0~~783.15
1493 |(% style="width:102px" %)32~~47|(% style="width:185px" %)HSX776.0~~776.15|(% style="width:191px" %)HSX784.0~~784.15
1494 |(% style="width:102px" %)48~~63|(% style="width:185px" %)HSX777.0~~777.15|(% style="width:191px" %)HSX785.0~~785.15
1495 |(% rowspan="4" style="width:135px" %)16|(% style="width:102px" %)0~~15|(% style="width:185px" %)HSX790.0~~790.15|(% style="width:191px" %)HSX798.0~~798.15
1496 |(% style="width:102px" %)16~~31|(% style="width:185px" %)HSX791.0~~791.15|(% style="width:191px" %)HSX799.0~~799.15
1497 |(% style="width:102px" %)32~~47|(% style="width:185px" %)HSX792.0~~792.15|(% style="width:191px" %)HSX800.0~~800.15
1498 |(% style="width:102px" %)48~~63|(% style="width:185px" %)HSX793.0~~793.15|(% style="width:191px" %)HSX801.0~~801.15