Skip to Content

Wiki source code of 12 HMI internal registers

Version 17.1 by Hunter on 2023/02/18 13:53
Show last authors
1 = **Introduction** =
2
3 HMI provide four types of HMI address for user. You can use them as temporary variables of the program. The use is consistent with the way access to the PLC register. You could also reference through the address, PIStudio provides three types of such memory.
4
5 *HSW, HDW, HUW, HAW are word address, HSX, HDX, HUX, HAX are bit address.
6
7 * **System data area (HSW): **A special register defined by the system.
8 * **Data storage area (HDW/HDX): **Users store user data.
9 * **System data area (HUW): **A special register defined by the system.
10 * **System Data (HAW)**: System register used for power-off save.
11 * **Recipe index area (RPW): **System register used for recipe index.
12
13 HMI internal registers are divided into bit address and word address, which can be accessed in two ways (take HDW as an example).
14
15 * Access as word with the prefix "HDW".
16 ** HDW0 means the 1st word of system data area. HDW1 means the 2nd word of system data area.
17 * Access as bit with the prefix "HDX".  The number before "." i".  The number before Access in bit with the prefix "HD".  The number before Access in bit with the prefix "HDX". The number before "." indicates the number of the word. The number after "." indicates the bit number of the word.
18 ** HDX1020.12 means to access the system data area in bit mode, the specific location is the 13th bit of the 1020 word.
19
20 (% class="box infomessage" %)
21 (((
22 **✎Note:**
23
24 * Addresses in HDX are the bits from words in HDW, so be careful when using addresses. For example, HDX1020.12 is the 13th bit to access the 1020 word. The value of this bit is the same as that of the word accessed through HDW001020. The 13th bit of this word is actually the same bit as HDX1020.12.
25 * The address of the bit address HDX is with a decimal point while word addresses are integers.
26 )))
27
28 = **Data storage area (HDW/HDX)** =
29
30 It is used to save the temporary data of project.
31
32 1. Access as word, and serial number range is from HDW0 to HDW299999.
33 1. Access as bit, and serial number range is from HDX0.0 to HDX299999.15.
34
35 = **Power-down save area (HAW/HAX)** =
36
37 It is system registers used for power-off save.
38
39 1. Access as word, and serial number range is from HAW0 to HAW199999.
40 1. Access as bit, and serial number range is from HAX0.0 to HAX199999.15.
41
42 (% class="box infomessage" %)
43 (((
44 **✎Note:**
45
46 * HAW/HAX is power-down retention. The register of this type is able to save the data before the power-down.
47 * To avoid possible device failure, do not immediately power off and reboot when configuring the power-down save addre
48 )))
49
50 = **Recipe index area (RPW)** =
51
52 It is system recipe data power-off save register. The range is from RPW000000 to RPW990450.
53
54 **✎Note:**
55
56 * RPW is power-down retention. The register of this type is able to save the data before the power-down.
57 * To avoid possible device failure, do not immediately power off and reboot when configuring the power-down save addre
58
59 = **Single user data area (HUW/HUX)** =
60
61 It is used for system special registers (reserved by system).
62
63 1. Access as word, and serial number range is from HUW0 to HUW199999.
64 1. Access as bit, and serial number range is from HUX0.0 to HUX199999.15.
65
66 **✎Note:**
67
68 * HUW/HUX is a system special register, so please check the system special register list during use. Please use the address specified in the table and do not use the address which is not mentioned in the table.
69
70 (% class="table-bordered" %)
71 |=**Special register address**|=**Description**|=**Function**
72 |=HUW0|Screen switch|A single terminal controls the screen switching, and all terminals do not affect each other.
73 |=HUW110~~HUW119|(% rowspan="26" %)Addresses of the built-in keyboard|The T9 input method stores the selected seria number length
74 |=HUW120~~HUW129|The T9 input method stores the selected Chinese Pinyin length
75 |=HUW135|Input method: first input
76 |=HUW136|Button: T9 Chinese Pinyin page
77 |=HUW137|Button: T9 Chinese characters page
78 |=HUW138|Button: symbol
79 |=HUW139|Button: switch
80 |=HUW140|Button: Chinese characters 1
81 |=HUW142|Button: Chinese characters 2
82 |=HUW144|Button: Chinese characters 3
83 |=HUW146|Button: Chinese characters 4
84 |=HUW148|Button: Chinese characters 5
85 |=HUW150|Button: Chinese characters 6
86 |=HUW152|Button: Chinese characters 7
87 |=HUW154|Button: Chinese characters 8
88 |=HUW156|Button: Chinese characters 9
89 |=HUW158|Button: Chinese characters 10
90 |=HUW160~~HUW169|Button: Chinese Pinyin 1
91 |=HUW170~~HUW179|Button: Chinese Pinyin 2
92 |=HUW180~~HUW189|Button: Chinese Pinyin 3
93 |=HUW190~~HUW199|Button: Chinese Pinyin 4
94 |=HUW200~~HUW699|Input method cache length
95 |=HUW700~~HUW749|Minimum value of the input method
96 |=HUW750~~HUW799|Maximum value of the input method
97 |=HUW800|Case switching of the input method
98 |=HUW801~~HUW900|Input method format cache length
99 |=HUW1000|(% rowspan="12" %)Addresses of user permission|OK (Sign in)
100 |=HUW1001|Result of operation
101 |=HUW1002~~1005|Old password
102 |=HUW1006~~1009|New password
103 |=HUW1010~~1013|Confirm password
104 |=HUW1014~~1029|New user name
105 |=HUW1030~~1157|States information of user permission
106 |=HUW1158~~1335|User name (Only or drop-down list object)
107 |=HUW1336~~1345|User name description or note
108 |=HUW1347|Hidden function configurations
109 |=HUW1348|Permission settings
110 |=HUW1349|Current user name
111 |=HUW1382|User sign in way|(((
112 * 0: Select the user name from drop-down list object for signing in
113 * 1: Enter the user name in Character Input/Display object for signing in (HUW1014)
114 )))
115 |=HUW1400|Time interval from last operation|(((
116 Shows how long the touch screen has not been clicked, in seconds. 32-bit unsigned integer
117
118 **✎Note:** Clicking by different users will only clear the corresponding register of the currently operating terminal, and the registers on other terminals (such as mobile phones, computers) will not be cleared.
119 )))
120 |=HUW1402|Keyboard note|It saves the text information of the keyboard notes when clicking object(HUW1402-HUW1433)
121 |=HUW1436|Current object level|Indicate current object security level
122
123 = **Special data area (HSW/HSX)** =
124
125 It is used for system special registers (reserved by system).
126
127 1. Access as word, and serial number range is from HSW0 to HSW49999. (HSW10000 to HSW19999 are the power-off storage areas)
128 1. Access as bit, and serial number range is from HSX0.0 to HSX49999.15.
129
130 **✎Note:**
131
132 * HSW / HSX are a system special register, so please check the system special register list during use. Please use the address specified in the table and do not use the address which is not mentioned in the table.
133 * To avoid possible device failure, do not immediately power off and reboot when configuring the power-down save address.
134
135 (% class="table-bordered" style="width:1024px" %)
136 |=(% scope="row" style="width: 160px;" %)**Address**|=(% style="width: 282px;" %)**Function**|=(% style="width: 452px;" %)**Description**
137 |=(% style="width: 160px;" %)HSW0|(% style="width:282px" %)Language switch|(% style="width:452px" %)Multiple language could be set in the project, HMI support maximum 8 languages. (Power-down save supported)
138 |=(% style="width: 160px;" %)HSW1|(% style="width:282px" %)Beep frequency|(% style="width:452px" %)Frequency range: 0~~4000
139 |=(% style="width: 160px;" %)HSW2|(% style="width:282px" %)Beep volume|(% style="width:452px" %)Volume range: 0~~80
140 |=(% style="width: 160px;" %)HSW3|(% style="width:282px" %)Beep time|(% style="width:452px" %)Unit: ms
141 |=(% style="width: 160px;" %)HSW4|(% style="width:282px" %)Beep whether enable or not|(% style="width:452px" %)(((
142 * =0: Enable.
143 * =1: Disable.
144 )))
145 |=(% style="width: 160px;" %)HSW5|(% style="width:282px" %)(((
146 Alarm indicator
147 )))|(% style="width:452px" %)(((
148 * =0: Currently no alarm or all alarms have been off.
149 * =1: Currently alarm(s) still keep in on.
150 )))
151 |=(% style="width: 160px;" %)HSW6~~HSW7|(% style="width:282px" %)Number of alarms|(% style="width:452px" %)The number of alarm (it also includes the records of alarm confirmed)
152 |=(% style="width: 160px;" %)HSW8|(% style="width:282px" %)Number of unconfirmed history alarm|(% style="width:452px" %)The number of unconfirmed history alarm
153 |=(% style="width: 160px;" %)HSW9|(% style="width:282px" %)Time out tip|(% style="width:452px" %)(((
154 * =0: Enable
155 * =1: Disable
156 )))
157 |=(% style="width: 160px;" %)HSW12|(% style="width:282px" %)Screen swicth|(% style="width:452px" %)(((
158 * = 0: Only HSW control the screen switch, and the sreens of all users will switch.
159 * = 1: Only HUW control the screen switch, and all users do not affect each other.
160 )))
161 |=(% style="width: 160px;" %)HSW13|(% style="width:282px" %)Screen switch register|(% style="width:452px" %)Equal to different values, the screen jumps to the corresponding screen number of the screen.
162 |=(% style="width: 160px;" %)HSW24|(% style="width:282px" %)Reboot HMI|=(% style="width: 452px;" %)1: Reboot
163 |=(% style="width: 160px;" %)HSW28|(% style="width:282px" %)Local time: year|(% style="width:452px" %)Range: 0~~9999 (system reserved)
164 |=(% style="width: 160px;" %)HSW29|(% style="width:282px" %)Local time: month|(% style="width:452px" %)Range: 01~~12 (system reserved)
165 |=(% style="width: 160px;" %)HSW30|(% style="width:282px" %)Local time: day|(% style="width:452px" %)Range: 01~~31 (system reserved)
166 |=(% style="width: 160px;" %)HSW31|(% style="width:282px" %)Local time: hour|(% style="width:452px" %)Range: 0~~23 (system reserved)
167 |=(% style="width: 160px;" %)HSW32|(% style="width:282px" %)Local time: minute|(% style="width:452px" %)Range: 0~~59 (system reserved)
168 |=(% style="width: 160px;" %)HSW33|(% style="width:282px" %)Local time: second|(% style="width:452px" %)Range: 0~~59 (system reserved)
169 |=(% style="width: 160px;" %)HSW34|(% style="width:282px" %)Local time: week|(% style="width:452px" %)(((
170 * =0: Sunday.
171 * =1: Monday.
172 * =2: Tuesday.
173 * =3: Wednesday.
174 * =4: Thursday.
175 * =5: Friday.
176 * =6: Saturday.
177 )))
178 |=(% style="width: 160px;" %)HSW134|(% style="width:282px" %)(((
179 Whether the Script is read through
180
181
182 )))|(% style="width:452px" %)(((
183 **✎Note:** If want to read-only or write-only, please enable this settings.
184
185 * =0: Read from HMI cache(Default)
186 * =1: Read from PLC directly
187 )))
188 |=(% style="width: 160px;" %)HSW135|(% style="width:282px" %)Confirm installment password|(% style="width:452px" %)Confirm button for installment password
189 |=(% style="width: 160px;" %)HSW151|(% style="width:282px" %)Installment due|(% style="width:452px" %)Number of days to installment due
190 |=(% style="width: 160px;" %)HSW185~~200|(% style="width:282px" %)Installment password|(% style="width:452px" %)Enter installment password
191 |=(% style="width: 160px;" %)HSW242|(% style="width:282px" %)(((
192 Prompt result of recipe operation
193
194 * Upload: Data is written from address to file
195 * Download: Data is written from a file to an address
196 )))|(% style="width:452px" %)(((
197 * =1: Download recipe, start
198 * =2: Download recipe, execution error
199 * =3: Download recipe, files don't exist
200 * =4: Download recipe, members don't exist
201 * =5: Download recipe, groups don't exist
202 * =6: Download recipe, success
203 * =7: Upload recipe, start
204 * =8: Upload recipe, execution error
205 * =9: Upload recipe, files don't exist
206 * =10: Upload recipe, members don't exist
207 * =11: Upload recipe, groups don't exist
208 * =12: Upload recipe, success
209 * =13: Insert recipe, start
210 * =14: Insert recipe, execution error
211 * =15: Insert recipe, files don't exist
212 * =16: Insert recipe, members don't exist
213 * =17: Insert recipe, groups don't exist
214 * =18: Insert recipe, success
215 * =19: Delete recipe, start
216 * =20: Delete recipe, execution error
217 * =21: Delete recipe, files don't exist
218 * =22: Delete recipe, members don't exist
219 * =23: Delete recipe, groups don't exist
220 * =24: Delete recipe, success
221 * =25: Delete and sort recipe, start
222 * =26: Delete recipe and sort, execution error
223 * =27: Delete recipe and sort, files don't exist
224 * =28: Delete recipe and sort, members don't exist
225 * =29: Delete recipe and sort, groups don't exist
226 * =30: Delete recipe and sort, success
227 * =37: CSV recipe files import successfully
228 * =38: CSV recipe files import failed.
229 )))
230 |=(% style="width: 160px;" %)HSW243|(% style="width:282px" %)Prompt result of recipe index|(% style="width:452px" %)(((
231 * =31: Recipe index, start
232 * =32: Recipe index, execution error
233 * =33: Recipe index, files don't exist
234 * =34: Recipe index, members don't exist
235 * =35: Recipe index, groups don't exist
236 * =36: Recipe index, success
237 )))
238 |=(% style="width: 160px;" %)HSW521|(% style="width:282px" %)Delete graph and alarm record|(% style="width:452px" %)(((
239 * =0: No operation
240 * =1: HSX521.0=1, delete all records.
241 * =2: HSX521.1=1, delete all trend graph.
242 * =4: HSX521.2=1, delete all alarms.
243 * =16: HSX521.4=1, delete history XY plot.
244 * =32: HSX521.5=1, delete data records in SD card or USB flash disk;(Please make a setting which is saved to USB flash disk or SD card in project setting).
245 * =64: HSX521.6=1, delete alarms records in SD card or USB flash disk; (Please make a setting which is saved to USB flash disk or SD card in project setting).
246 )))
247 |=(% style="width: 160px;" %)HSW522|(% style="width:282px" %)Copy and paste the alarm/data files in flash to the USB flash disk|(% style="width:452px" %)(((
248 * =0: No operation
249 * =1: HSX522.0=1, copy all record
250 * =2: HSX522.2=1, copy history XY trend graph
251 * =8: HSX522.3=1, copy alarm record
252 * =32: HSX522.5=1, copy recipe
253 )))
254 |=(% style="width: 160px;" %)HSW523|(% style="width:282px" %)Copy and paste the alarm/data files in flash to the SD card|(% style="width:452px" %)(((
255 * =0: No operation
256 * =1: HSX523.0=1, copy all record
257 * =4: HSX523.2=1, copy history XY trend graph
258 * =8: HSX523.3=1, copy alarm record
259 )))
260 |=(% style="width: 160px;" %)HSW524|(% style="width:282px" %)Copy and paste the alarm/data files in SD card to the USB flash disk|(% style="width:452px" %)(((
261 * =0: no operation
262 * =4: HSX524.2=1, copy history XY trend graph
263 * =8: HSX524.3=1, copy alarm record
264 * =16: HSX524.4=1, copy history alarm record
265 * =32: HSX524.5=1, copy data record
266 )))
267 |=(% style="width: 160px;" %)HSW525|(% style="width:282px" %)Copy and paste the alarm/data files in USB flash disk to SD card|(% style="width:452px" %)(((
268 * =0: no operation
269 * =4: HSX525.2=1, copy history XY trend graph
270 * =8: HSX525.3=1, copy alarm record
271 * =16: HSX525.4=1, copy history alarm record
272 * =32: HSX525.5= 1, copy data record
273 )))
274 |=(% style="width: 160px;" %)HSW526|(% style="width:282px" %)Delete file list|(% style="width:452px" %)(((
275 * =0: no operation
276 * =1: HSX526.0=1, delete designated file
277 * =2: HSX526.1=1, delete all files
278 )))
279 |=(% style="width: 160px;" %)HSW527|(% style="width:282px" %)Eject USB flash disk/SD card|(% style="width:452px" %)(((
280 * =0: No operation
281 * =1: Eject USB flash disk
282 * =2: Eject SD card
283 )))
284 |=(% style="width: 160px;" %)HSW528|(% style="width:282px" %)The state of USB flash disk|(% style="width:452px" %)(((
285 * =1: USB flash disk is detected
286 * =2: Ejecting USB flash disk, please waiting…
287 * =3: USB flash disk ejected
288 )))
289 |=(% style="width: 160px;" %)HSW529|(% style="width:282px" %)The state of SD card|(% style="width:452px" %)(((
290 * =1: SD card is detected
291 * =2: Ejecting SD card, please waiting…
292 * =3: SD card ejected
293 )))
294 |=(% style="width: 160px;" %)HSW550~~849|(% style="width:282px" %)Communication control|(% style="width:452px" %)For communication control and communication lamp (please refer to "[[communication control>>http://13.229.109.52:8080/wiki/pistudio/view/Helps/13.HMI%20internal%20registers/#HCommunicationcontrol]]" sector for detailed)
295 |=(% style="width: 160px;" %)HSW850|(% style="width:282px" %)(((
296 Network state
297
298 (4G, WIFI and Ethernet)
299 )))|(% style="width:452px" %)(((
300 In HMI V1.0
301
302 * =0: Network is disconnected.
303 * =1: only LAN connected, and APP can't access HMI.
304 * =2: WECON Cloud connected , APP and web could access HMI.
305
306 In HMI V2.0
307
308 * =0: Network is disconnected.
309 * =1: Network is connected.
310 )))
311 |=(% style="width: 160px;" %)HSW855|(% style="width:282px" %)Backlight Control|(% style="width:452px" %)(((
312 * HSX855.0=1: turn on the backlight and reset automatically after being triggered.
313 * HSX855.1=1: turn off the backlight and reset automatically after being triggered.
314 )))
315 |=(% style="width: 160px;" %)HSW856|(% style="width:282px" %)Whether to close the indirect screen when the current screen is switched to the other screen)|(% style="width:452px" %)(((
316 * =0: close the sub-screen, including the indirect screen;
317 * =1: not to close.
318 )))
319 |=(% style="width: 160px;" %)HSW857|(% style="width:282px" %)Permission in remote access (web page, mobile APP, cloud platform, etc.)|(% style="width:452px" %)(((
320 * =0: users could switch the screen, control the switch and update data in remote access.
321 * =1: users could only control function switch (only switch the screen), view data and switch state, but could not operate or update them.
322 * =2: users could neither operate the screen switch, nor switch operation and data modification, only view. (The ig series and 8000/9000 series with -R after system upgrade)
323 )))
324 |=(% style="width: 160px;" %)HSW860~~861|(% style="width:282px" %)Data partition remaining space|(% style="width:452px" %)Display the data partition remaining space, updated every minute, unit(**kB**)
325 |=(% style="width: 160px;" %)HSW880|(% style="width:282px" %)Enable data partition remaining space|(% style="width:452px" %)(((
326 ~=1, able to view the data partition remaining space from HSW860~~861.
327
328 ~=Other value except 1, disable the viewing function.
329 )))
330 |=(% style="width: 160px;" %)HSW881|(% style="width:282px" %)Storage of Record files|(% style="width:452px" %)(((
331 It is used for controlling saving alarm/data record files to U disk / SD card.
332
333 * = 0: Save to storage.
334 * = 1: Don't save to storage.
335 )))
336 |=(% style="width: 160px;" %)HSW882|(% style="width:282px" %)Storage device status|(% style="width:452px" %)(((
337 * HDX882.0=0 USB flash doesn't execute storage or storage finished.
338 * HDX882.0=1 USB flash is reading data, don't remove USB flash.
339 * HDX882.1=0 SD card doesn't execute storage or storage finished.
340 * HDX882.1=1 SD card is reading data, don't remove SD card.
341 )))
342 |=(% style="width: 160px;" %)HSW884|(% style="width:282px" %)Enter the system network configuration interface|(% style="width:452px" %)(((
343 * =0: Do not enter the network configuration interface
344 * =1: Enter the system network configuration interface.
345 ** ig series HMI only supports to enter the system interface
346
347 )))
348 |=(% style="width: 160px;" %)HSW885|(% style="width:282px" %)When the control object hides the address is read failed (communication failure), set the display mode of the object|(% style="width:452px" %)(((
349 * = 0: displayed by object setting.
350 * =1: control address read failure, the address control of all objects is hidden, not displayed.
351 * =2: control address read failure, the address control of all objects is displayed, not hidden.
352 )))
353 |=(% style="width: 160px;" %)HSW893|(% style="width:282px" %)(((
354 User Permission Control Address, same as HUW1000 feature, please refer to chapter "[[User Permission>>http://13.229.109.52:8080/wiki/pistudio/view/Helps/08.Basic%20Function/#HUserPermission]]"
355
356 **✎Note: **This address can only take effect when it is operated in the real HMI, and the operation is invalid on Web/App side.
357 )))|(% style="width:452px" %)(((
358 * =1: User Log in
359 * =2: Change User password
360 * =3: User Log out
361 * =4: New user
362 * =5: Delete user
363 * =6: Add user rights
364 * =8: Add Hide features
365 * =9: Delete Profile
366 * =10: Export Profile
367 * =11: Import profile
368 * =12: Export log file
369 * =13: Delete log file
370 )))
371 |=(% style="width: 160px;" %)HSW900|(% style="width:282px" %)Quick update frequency settings for objects|(% style="width:452px" %)(((
372 Valid when the object is enabled for "quick update". Default: 5.
373
374 Range: 1 (fastest) ~~ 50 (slowest)
375 )))
376 |=(% style="width: 160px;" %)HSW920|(% style="width:282px" %)Static mode Maximum periods|(% style="width:452px" %)Numeric Input/ Display (range: 0-12)
377 |=(% style="width: 160px;" %)HSW921 ~~ 924|(% style="width:282px" %)Static mode Admin key|(% style="width:452px" %)Character Input/ Display (length: 8)
378 |=(% style="width: 160px;" %)HSW925 ~~ 928|(% style="width:282px" %)1^^st^^ period key (Static mode)|(% style="width:452px" %)Character Input/ Display (length: 8)
379 |=(% style="width: 160px;" %)HSW929 ~~ 933|(% style="width:282px" %)1^^st^^ expiry time (Static mode)|(% style="width:452px" %)Numeric Input/ Display (YYYYMMDDHHMM)
380 |=(% style="width: 160px;" %)HSW935 ~~ 938|(% style="width:282px" %)2^^nd^^ period key (Static mode)|(% style="width:452px" %)Character Input/ Display (length: 8)
381 |=(% style="width: 160px;" %)HSW939 ~~ 943|(% style="width:282px" %)2^^nd ^^expiry time (Static mode)|(% style="width:452px" %)Numeric Input/ Display (YYYYMMDDHHMM)
382 |=(% style="width: 160px;" %)HSW945 ~~ 948|(% style="width:282px" %)3^^rd^^ period key (Static mode)|(% style="width:452px" %)Character Input/ Display (length: 8)
383 |=(% style="width: 160px;" %)HSW949 ~~ 953|(% style="width:282px" %)3^^rd ^^expiry time (Static mode)|(% style="width:452px" %)Numeric Input/ Display (YYYYMMDDHHMM)
384 |=(% style="width: 160px;" %)HSW955 ~~ 958|(% style="width:282px" %)4^^th^^ period key (Static mode)|(% style="width:452px" %)Character Input/ Display (length: 8)
385 |=(% style="width: 160px;" %)HSW959 ~~ 963|(% style="width:282px" %)4^^th ^^expiry time (Static mode)|(% style="width:452px" %)Numeric Input/ Display (YYYYMMDDHHMM)
386 |=(% style="width: 160px;" %)HSW965 ~~ 968|(% style="width:282px" %)5^^th^^ period key (Static mode)|(% style="width:452px" %)Character Input/ Display (length: 8)
387 |=(% style="width: 160px;" %)HSW969 ~~ 973|(% style="width:282px" %)5^^th ^^expiry time (Static mode)|(% style="width:452px" %)Numeric Input/ Display (YYYYMMDDHHMM)
388 |=(% style="width: 160px;" %)HSW975 ~~ 978|(% style="width:282px" %)6^^th^^ period key (Static mode)|(% style="width:452px" %)Character Input/ Display (length: 8)
389 |=(% style="width: 160px;" %)HSW979 ~~ 983|(% style="width:282px" %)6^^th ^^expiry time (Static mode)|(% style="width:452px" %)Numeric Input/ Display (YYYYMMDDHHMM)
390 |=(% style="width: 160px;" %)HSW985 ~~ 988|(% style="width:282px" %)7^^th^^ period key (Static mode)|(% style="width:452px" %)Character Input/ Display (length: 8)
391 |=(% style="width: 160px;" %)HSW989 ~~ 993|(% style="width:282px" %)7^^th ^^expiry time (Static mode)|(% style="width:452px" %)Numeric Input/ Display (YYYYMMDDHHMM)
392 |=(% style="width: 160px;" %)HSW995 ~~ 998|(% style="width:282px" %)8^^th^^ period key (Static mode)|(% style="width:452px" %)Character Input/ Display (length: 8)
393 |=(% style="width: 160px;" %)HSW999 ~~ 1003|(% style="width:282px" %)8^^th ^^expiry time (Static mode)|(% style="width:452px" %)Numeric Input/ Display (YYYYMMDDHHMM)
394 |=(% style="width: 160px;" %)HSW1005 ~~1008|(% style="width:282px" %)9^^th^^ period key (Static mode)|(% style="width:452px" %)Character Input/ Display (length: 8)
395 |=(% style="width: 160px;" %)HSW1009 ~~ 1013|(% style="width:282px" %)9^^th ^^expiry time (Static mode)|(% style="width:452px" %)Numeric Input/ Display (YYYYMMDDHHMM)
396 |=(% style="width: 160px;" %)HSW1015 ~~1018|(% style="width:282px" %)10^^th^^ period key (Static mode)|(% style="width:452px" %)Character Input/ Display (length: 8)
397 |=(% style="width: 160px;" %)HSW1019 ~~ 1023|(% style="width:282px" %)10^^th ^^expiry time (Static mode)|(% style="width:452px" %)Numeric Input/ Display (YYYYMMDDHHMM)
398 |=(% style="width: 160px;" %)HSW1025 ~~1028|(% style="width:282px" %)11^^th^^ period key (Static mode)|(% style="width:452px" %)Character Input/ Display (length: 8)
399 |=(% style="width: 160px;" %)HSW1029 ~~ 1033|(% style="width:282px" %)11^^th ^^expiry time (Static mode)|(% style="width:452px" %)Numeric Input/ Display (YYYYMMDDHHMM)
400 |=(% style="width: 160px;" %)HSW1035 ~~1038|(% style="width:282px" %)12^^th^^ period key (Static mode)|(% style="width:452px" %)Character Input/ Display (length: 8)
401 |=(% style="width: 160px;" %)HSW1039 ~~ 1043|(% style="width:282px" %)12^^th ^^expiry time (Static mode)|(% style="width:452px" %)Numeric Input/ Display (YYYYMMDDHHMM)
402 |=(% style="width: 160px;" %)HSW1046|(% style="width:282px" %)Current period (Static mode)|(% style="width:452px" %)Current period (Range 1-13)
403 |=(% style="width: 160px;" %)HSW1047|(% style="width:282px" %)Save settings (Static mode)|(% style="width:452px" %)(((
404 * HSX1047.0=1: Save static installment information
405 * HSX1047.1=1: Write installment information to registers
406 )))
407 |=(% style="width: 160px;" %)HSW1050~~HSW1065|(% style="width:282px" %)The recipe name that can input csv format|(% style="width:452px" %)Input CSV format recipe file name through "Character Input/ Display".(This function should be used in combination with the recipefunction)
408 |=(% style="width: 160px;" %)HSW1066|(% style="width:282px" %)Configure the type of the CSV file imported|(% style="width:452px" %)(((
409 The CSV file type imported (This function should be used in combination with the recipe function)
410
411 * =0: Import customed CSV file. The data in the file is valid.
412 * =1: Import ordinary recipe files of regular series HMI. The 1st row of the file is invalid.
413 * =2: Import special recipe files of regular series HMI. The 1st and 3nd rows and the 1st colume of the file is invalid.
414 )))
415 |=(% style="width: 160px;" %)HSW1067|(% style="width:282px" %)Location where the CSV file is saved|(% style="width:452px" %)(((
416 Set the path of CSV file (This function should be used in combination with the recipe function)
417
418 * =0: In the CsvFile directory of the USB stick
419 * =1: In the CsvFile directory of the SD card
420 )))
421 |=(% style="width: 160px;" %)HSW1070|(% style="width:282px" %)The time interval (seconds) since the last time the screen was clicked|(% style="width:452px" %)(((
422 Shows how long the current screen has not been clicked, using a decimal unsigned double word (Numeric Input/ Display).
423
424 **✎Note: **This register is cleared to zero regardless of which user clicks on the screen.
425 )))
426 |=(% style="width: 160px;" %)HSW1073|(% style="width:282px" %)Corresponding key value from keyboard|(% style="width:452px" %)Display the key value of the currently pressed key, the key value is shown in Table 1 (not updated when the character input display is being input)
427 |=(% style="width: 160px;" %)HSW1074|(% style="width:282px" %)Keyboard key status|(% style="width:452px" %)Display the current button status (not updated when the numeric input display is being input)(((
428 * =0: key release
429 * =1: key press
430 * =2: Long press the button
431 )))
432 |=(% style="width: 160px;" %)HSW1075|(% style="width:282px" %)Cursor speed|(% style="width:452px" %)Control the cursor movement speed, the range is 0～100, the default is 20
433 |=(% style="width: 160px;" %)HSW1076|(% style="width:282px" %)Cursor x coordinate value|(% style="width:452px" %)Record the x value at the current position of the cursor, range: 0 to screen width -1
434 |=(% style="width: 160px;" %)HSW1077|(% style="width:282px" %)Cursor y coordinate value|(% style="width:452px" %)Record the y value at the current position of the cursor, range: 0 to screen height-1
435 |=(% style="width: 160px;" %)HSW1078|(% style="width:282px" %)Corresponding ASCII code for keyboard keys|(% style="width:452px" %)Only the ASCII value of letters, numbers, and symbols are displayed, and the ASCII value of the function button is not displayed.
436 |=(% style="width: 160px;" %)HSW1079|(% style="width:282px" %)Trigger to set the cursor position and set the Enter key mode|(% style="width:452px" %)(((
437 * HSX1079.0=1: Set the cursor position according to the cursor xy register value;
438 * HSX1079.1=0: When the numeric/character input display is being input, press Enter to end the input, no value/text part is being input, Enter is a normal click;
439 * HSX1079.1=1 Regardless of whether the numeric/character component is inputting the Enter key, only normal click is performed, and the keyboard end input is not performed.
440 )))
441 |=(% style="width: 160px;" %)HSW1083|(% style="width:282px" %)Naming method for printing object screenshots|(% style="width:452px" %)(((
442 Example: The time is 2019-01-04 14:29:10 (523 milliseconds), the screen number is 0, and the object ID is 2.
443
444 * =0: Use year, month, day, hour, minute, second, millisecond, screen number, part number to name, such as: 2019010414291052302.bmp.
445 * =1: Name using year, month, day, hour, minute, and second.
446
447 For example: 20190104142910.bmp.
448 )))
449 |=(% style="width: 160px;" %)HSW1086|(% style="width:282px" %)Control address mapping polling cycle, unit: ms|(% style="width:452px" %)(((
450 Address mapping polling cycle, effective range: 40~~1000ms, default: 300ms.
451
452 * When the set value is greater than 1000, the value is 1000.
453 * When the set value is greater than 1000, it changes to the default value 300
454 )))
455 |=(% style="width: 160px;" %)HSW1087|(% style="width:282px" %)Control write interval in address mapping|(% style="width:452px" %)(((
456 After reading data to the device for N times, Perform an address mapping write operation. N is the interval value. The effective range: 0~~5, and default is 2.
457
458 When N more than 5, it is 5.
459
460 0 is the fastest and 5 is the slowest.
461 )))
462 |=(% style="width: 160px;" %)HSW1088|(% style="width:282px" %)Control the write interval of script|(% style="width:452px" %)(((
463 After reading data to the device for N times, Perform a script write operation. N is the interval value. The effective range: 0~~5, and default is 2.
464
465 When N more than 5, it is 5.
466
467 0 is the fastest and 5 is the slowest.
468 )))
469 |=(% style="width: 160px;" %)HSW1089|(% style="width:282px" %)Control interval of read through|(% style="width:452px" %)(((
470 After reading data to the device for N times, Perform a read through operation. N is the interval value. The effective range: 0~~5, and default is 2.
471
472 When N more than 5, it is 5.
473
474 0 is the fastest and 5 is the slowest.
475 )))
476 |=(% style="width: 160px;" %)HSW1100|(% colspan="1" rowspan="4" style="width:282px" %)Set the Master IP for Multi-link|(% style="width:452px" %)High word 1 for Master IP address of multi-link
477 |=(% style="width: 160px;" %)HSW1101|(% style="width:452px" %)High word 2 for Master IP address of multi-link
478 |=(% style="width: 160px;" %)HSW1102|(% style="width:452px" %)High word 3 for Master IP address of multi-link
479 |=(% style="width: 160px;" %)HSW1103|(% style="width:452px" %)High word 4 for Master IP address of multi-link
480 |=(% style="width: 160px;" %)HSW1104|(% style="width:282px" %)Control connection to Master or not for Multi-link slave device|(% style="width:452px" %)(((
481 * =1: Connect to the Master
482 * =0: Do not connect to Master
483 )))
484 |=(% style="width: 160px;" %)HSW1141|(% style="width:282px" %)Release alarm|(% style="width:452px" %)(((
485 * =0, Default value
486 * =1, Release the alarm generated before the last power-down when starting up
487 )))
488 |=(% style="width: 160px;" %)HSW1200|(% colspan="1" rowspan="2" style="width:282px" %)TSAP settings for HMI in the Siemens LOGO! 8 protocol(ig series or HMI V2.0)|(% style="width:452px" %)HMI local TSAP, which corresponds to the remote TSAP of PLC
489 |=(% style="width: 160px;" %)HSW1201|(% style="width:452px" %)HMI remote TSAP, which corresponds to the local TSAP of PLC
490 |=(% style="width: 160px;" %)HSW1450|(% style="width:282px" %)Enable objects level password function|(% style="width:452px" %)(((
491 * =0, Disable
492 * =1, Enable
493 )))
494 |=(% style="width: 160px;" %)HSW1451|(% style="width:282px" %)Whether the object level passwords are independent of each other|(% style="width:452px" %)(((
495 * =0, No, high-level passwords can unlock low-level
496 * = 1, Yes, high-level passwords cannot unlock low-level
497 )))
498 |=(% style="width: 160px;" %)HSW1452|(% style="width:282px" %)Initialization level|(% style="width:452px" %)Initialization level while HMI running
499 |=(% style="width: 160px;" %)HSW1454~~1457|(% style="width:282px" %)Password for Level 1|(% style="width:452px" %)(((
500 Display password for level 1, using character input object, up to 8 characters (numbers, letters (case sensitive))
501 )))
502 |=(% style="width: 160px;" %)HSW1458~~1461|(% style="width:282px" %)Password for Level 2|(% style="width:452px" %)Display password for level 2, using character input object, up to 8 characters (numbers, letters (case sensitive))
503 |=(% style="width: 160px;" %)HSW1462~~1465|(% style="width:282px" %)Password for Level 3|(% style="width:452px" %)Display password for level 3, using character input object, up to 8 characters (numbers, letters (case sensitive))
504 |=(% style="width: 160px;" %)HSW1466~~1469|(% style="width:282px" %)Password for Level 4|(% style="width:452px" %)Display password for level 4, using character input object, up to 8 characters (numbers, letters (case sensitive))
505 |=(% style="width: 160px;" %)HSW1470~~1473|(% style="width:282px" %)Password for Level 5|(% style="width:452px" %)Display password for level 5, using character input object, up to 8 characters (numbers, letters (case sensitive))
506 |=(% style="width: 160px;" %)HSW1474~~1477|(% style="width:282px" %)Password for Level 6|(% style="width:452px" %)Display password for level 6, using character input object, up to 8 characters (numbers, letters (case sensitive))
507 |=(% style="width: 160px;" %)HSW1478~~1481|(% style="width:282px" %)Password for Level 7|(% style="width:452px" %)Display password for level 7, using character input object, up to 8 characters (numbers, letters (case sensitive))
508 |=(% style="width: 160px;" %)HSW1482~~1485|(% style="width:282px" %)Password for Level 8|(% style="width:452px" %)Display password for level 8, using character input object, up to 8 characters (numbers, letters (case sensitive))
509 |=(% style="width: 160px;" %)HSW1486~~1489|(% style="width:282px" %)Password for Level 9|(% style="width:452px" %)Display password for level 9, using character input object, up to 8 characters (numbers, letters (case sensitive))
510 |=(% style="width: 160px;" %)HSW1490~~1493|(% style="width:282px" %)Password for Level 10|(% style="width:452px" %)Display password for level 10, using character input object, up to 8 characters (numbers, letters (case sensitive))
511 |=(% style="width: 160px;" %)HSW1494~~1497|(% style="width:282px" %)Password for Level 11|(% style="width:452px" %)Display password for level 11, using character input object, up to 8 characters (numbers, letters (case sensitive))
512 |=(% style="width: 160px;" %)HSW1498~~1501|(% style="width:282px" %)Password for Level 12|(% style="width:452px" %)Display password for level 12, using character input object, up to 8 characters (numbers, letters (case sensitive))
513 |=(% style="width: 160px;" %)HSW1502|(% style="width:282px" %)Modify password for object level|(% style="width:452px" %)(((
514 * HSX1502.0=1: Modification comfirmed. Save the data of HSW1450~~HSW1501 to a file for immediate effect.
515 * HSX1502.1=1:Modification cancelled. Restore the current data of hSW1450-HSW1501 to the data saved in the file last time.
516 )))
517 |=(% style="width: 160px;" %)HSW1509|(% style="width:282px" %)Curve width|(% style="width:452px" %)(((
518 * =0: Use the curve width set by project default.
519 * =1 to 10: use special register to set curve width.
520 )))
521 |=(% style="width: 160px;" %)HSW1603|(% style="width:282px" %)Number of current unreleased alarms|(% style="width:452px" %)The number of current unreleased alarms in alarm record file.
522 |=(% style="width: 160px;" %)HSW1604|(% style="width:282px" %)The auxiliary judgment address when the control bit in the Object Lock fails to be read|(% style="width:452px" %)(((
523 * =0: The auxiliary address is invalid.
524 * =1: When the communication fails, lock the object.
525 * =2: When the communication fails, unlock the object.
526 * =Others: The auxiliary address is invalid.
527 )))
528 |=(% style="width: 160px;" %)HSW1605|(% style="width:282px" %)BCD format natural decimal control|(% style="width:452px" %)(((
529 Whether to display natural decimals with decimal point in BCD format:
530
531 * 0=Not enabled.
532 * 1=Enable.
533
534 (For example, 56.20 is displayed as 56.2, 33.00 is displayed as 33)
535 )))
536 |=(% style="width: 160px;" %)HSW1606|(% style="width:282px" %)User permission modification control|(% style="width:452px" %)(((
537 * =0: Ordinary users are allowed to modify permissions and other operations
538 * =1: Only the administrator can operate (default is 0)
539 )))
540 |=(% style="width: 160px;" %)HSW1607|(% style="width:282px" %)The spacing value among the drop-down items of the drop-down list|(% style="width:452px" %)10 to 50 is effective, such as: 23 is 2.3 times the height of the object.
541 |=(% style="width: 160px;" %)HSW1611|(% style="width:282px" %)(((
542 Traditional recipe transfer
543 )))|(% style="width:452px" %)(((
544 * =1: download traditional recipe.
545 * =2: upload the traditional recipe.
546 )))
547 |=(% style="width: 160px;" %)HSW1612|(% style="width:282px" %)Traditional Recipe group number|(% style="width:452px" %)Traditional Recipe group number
548 |=(% style="width: 160px;" %)HSW1613|(% style="width:282px" %)Display the status of network card|(% style="width:452px" %)(((
549 * =1: Normal
550 * =Others: Abnormal
551 )))
552 |=(% style="width: 160px;" %)HSW1614~~1623|(% style="width:282px" %)Download speed per second|(% style="width:452px" %)Display the download speed per second. (The value is string)
553 |=(% style="width: 160px;" %)HSW1624~~1633|(% style="width:282px" %)Upnload speed per second|(% style="width:452px" %)Display the upload speed per second. (The value is string)
554 |=(% style="width: 160px;" %)HSW1634~~1643|(% style="width:282px" %)Flow consumption rate|(% style="width:452px" %)Display the total flow rate per second (The value is string)
555 |=(% style="width: 160px;" %)HSW1644~~1653|(% style="width:282px" %)Download flow consumption after power on|(% style="width:452px" %)Display the download flow consumption after power on (The value is string)
556 |=(% style="width: 160px;" %)HSW1654~~1663|(% style="width:282px" %)Upload flow consumption after power on|(% style="width:452px" %)Display the upload flow consumption after power on (The value is string)
557 |=(% style="width: 160px;" %)HSW1664~~1673|(% style="width:282px" %)Total flow consumption after power on|(% style="width:452px" %)Display the total flow consumption after power on (download and upload). (The value is string)
558 |=(% style="width: 160px;" %)HSW1674~~1683|(% style="width:282px" %)Historical flow consumption|(% style="width:452px" %)Display historical flow consumption (download and upload). (The value is string)
559 |=(% style="width: 160px;" %)HSW1684~~1693|(% style="width:282px" %)Flow consumption in 10 minutes|(% style="width:452px" %)Flow consumption in 10 minutes (download and upload). (The value is string)
560 |=(% style="width: 160px;" %)HSW1694~~1703|(% style="width:282px" %)Flow consumption in 30 minutes|(% style="width:452px" %)Flow consumption in 30 minutes (download and upload). (The value is string)
561 |=(% style="width: 160px;" %)HSW1704~~1713|(% style="width:282px" %)Flow consumption in 3 hours|(% style="width:452px" %)Flow consumption in 3 hours (download and upload). (The value is string)
562 |=(% style="width: 160px;" %)HSW1715|(% style="width:282px" %)Reset flow|(% style="width:452px" %)(((
563 * =1: Clear historical flow data and restart the count.
564 * =Others: Invalid
565 )))
566 |=(% style="width: 160px;" %)HSW1719|(% style="width:282px" %)Network status of Ethernet connnecting to server|(% style="width:452px" %)(((
567 * =0: Server connection exception
568 * =1: Server connection is OK
569 )))
570 |=(% style="width: 160px;" %)HSW1720|(% colspan="1" rowspan="12" style="width:282px" %)Related IP register in WIFI network status (It is valid when HMI is connected to WIFI)|(% style="width:452px" %)Local IP address high byte 1
571 |=(% style="width: 160px;" %)HSW1721|(% style="width:452px" %)Local IP address high byte 2
572 |=(% style="width: 160px;" %)HSW1722|(% style="width:452px" %)Local IP address high byte 3
573 |=(% style="width: 160px;" %)HSW1723|(% style="width:452px" %)Local IP address high byte 4
574 |=(% style="width: 160px;" %)HSW1724|(% style="width:452px" %)Local mask IP address high byte 1
575 |=(% style="width: 160px;" %)HSW1725|(% style="width:452px" %)Local mask IP address high byte 2
576 |=(% style="width: 160px;" %)HSW1726|(% style="width:452px" %)Local mask IP address high byte 3
577 |=(% style="width: 160px;" %)HSW1727|(% style="width:452px" %)Local mask IP address high byte 4
578 |=(% style="width: 160px;" %)HSW1728|(% style="width:452px" %)Local gateway IP address high byte 1
579 |=(% style="width: 160px;" %)HSW1729|(% style="width:452px" %)Local gateway IP address high byte 2
580 |=(% style="width: 160px;" %)HSW1730|(% style="width:452px" %)Local gateway IP address high byte 3
581 |=(% style="width: 160px;" %)HSW1731|(% style="width:452px" %)Local gateway IP address high byte 4
582 |=(% style="width: 160px;" %)HSW1733|(% colspan="1" rowspan="6" style="width:282px" %)(((
583 Display the MAC code of current WIFI
584
585 (display in hexadecimal)
586 )))|(% style="width:452px" %)Local MAC address high byte 1 (hexadecimal)
587 |=(% style="width: 160px;" %)HSW1734|(% style="width:452px" %)Local MAC address high byte 2 (hexadecimal)
588 |=(% style="width: 160px;" %)HSW1735|(% style="width:452px" %)Local MAC address high byte 3 (hexadecimal)
589 |=(% style="width: 160px;" %)HSW1736|(% style="width:452px" %)Local MAC address high byte 4 (hexadecimal)
590 |=(% style="width: 160px;" %)HSW1737|(% style="width:452px" %)Local MAC address high byte 5 (hexadecimal)
591 |=(% style="width: 160px;" %)HSW1738|(% style="width:452px" %)Local MAC address high byte 6 (hexadecimal)
592 |=(% style="width: 160px;" %)HSW1739|(% style="width:282px" %)Display the network status of WIFI|(% style="width:452px" %)(((
593 * =0: Server connection exception
594 * =1: Server connection is OK
595 )))
596 |=(% style="width: 160px;" %)HSW1740|(% style="width:282px" %)Wi-fi signal strength|(% style="width:452px" %)(((
597 Display the value of Wi-fi signal signal strength, ranges from 0~~100 (Signal strength is automatically obtained only once when HMI is powered on, and it will not be automatically updated. It needs to be used with the HSW1890)
598 )))
599 |=(% style="width: 160px;" %)HSW1741|(% colspan="1" rowspan="12" style="width:282px" %)Related IP register in 4Gnetwork status (It is valid when HMI is connected to 4G)|(% style="width:452px" %)Local IP address high byte 1
600 |=(% style="width: 160px;" %)HSW1742|(% style="width:452px" %)Local IP address high byte 2
601 |=(% style="width: 160px;" %)HSW1743|(% style="width:452px" %)Local IP address high byte 3
602 |=(% style="width: 160px;" %)HSW1744|(% style="width:452px" %)Local IP address high byte 4
603 |=(% style="width: 160px;" %)HSW1745|(% style="width:452px" %)Local mask IP address high byte 1
604 |=(% style="width: 160px;" %)HSW1746|(% style="width:452px" %)Local mask IP address high byte 2
605 |=(% style="width: 160px;" %)HSW1747|(% style="width:452px" %)Local mask IP address high byte 3
606 |=(% style="width: 160px;" %)HSW1748|(% style="width:452px" %)Local mask IP address high byte 4
607 |=(% style="width: 160px;" %)HSW1749|(% style="width:452px" %)Local gateway IP address high byte 1
608 |=(% style="width: 160px;" %)HSW1750|(% style="width:452px" %)Local gateway IP address high byte 2
609 |=(% style="width: 160px;" %)HSW1751|(% style="width:452px" %)Local gateway IP address high byte 3
610 |=(% style="width: 160px;" %)HSW1752|(% style="width:452px" %)Local gateway IP address high byte 4
611 |=(% style="width: 160px;" %)HSW1754|(% colspan="1" rowspan="6" style="width:282px" %)(((
612 Display the MAC code of current WIFI
613
614 (display in hexadecimal)
615 )))|(% style="width:452px" %)Local MAC address high byte 1 (hexadecimal)
616 |=(% style="width: 160px;" %)HSW1755|(% style="width:452px" %)Local MAC address high byte 2 (hexadecimal)
617 |=(% style="width: 160px;" %)HSW1756|(% style="width:452px" %)Local MAC address high byte 3 (hexadecimal)
618 |=(% style="width: 160px;" %)HSW1757|(% style="width:452px" %)Local MAC address high byte 4 (hexadecimal)
619 |=(% style="width: 160px;" %)HSW1758|(% style="width:452px" %)Local MAC address high byte 5 (hexadecimal)
620 |=(% style="width: 160px;" %)HSW1759|(% style="width:452px" %)Local MAC address high byte 6 (hexadecimal)
621 |=(% style="width: 160px;" %)HSW1760|(% style="width:282px" %)Display 4G network status|(% style="width:452px" %)(((
622 * =0: Server connection exception
623 * =1: Server connection is OK
624 )))
625 |=(% style="width: 160px;" %)HSW1761|(% style="width:282px" %)Display 4G network signal strength|(% style="width:452px" %)Signal strength: 0~~31. The greater the value ,the signal is stronger
626 |=(% style="width: 160px;" %)(((
627 HSW1762
628 )))|(% colspan="1" rowspan="13" style="width:282px" %)(((
629 Note: Valid when Ethernet2 of HMI is plugged into the network cable.
630 ①、When the Ethernet setting is enabled in the project parameters, this register displays the set value.
631 ②. When the Ethernet setting is not enabled in the engineering parameters, the register displays the Ethernet IP automatically acquired by the HMI.
632 ③. When the HMI is not plugged into the network cable, the register will show 0 whether the engineering parameters are set or not.
633 ④.IP related registers can be read and written (only static IP mode can be written).
634 )))|(% style="width:452px" %)(((
635 Ethernet2 Local IP address high byte 1
636 )))
637 |=(% style="width: 160px;" %)(((
638 HSW1763
639 )))|(% style="width:452px" %)(((
640 Ethernet2 Local IP address high byte 2
641 )))
642 |=(% style="width: 160px;" %)(((
643 HSW1764
644 )))|(% style="width:452px" %)(((
645 Ethernet2 Local IP address high byte 3
646 )))
647 |=(% style="width: 160px;" %)(((
648 HSW1765
649 )))|(% style="width:452px" %)(((
650 Ethernet2 Local IP address high byte 4
651 )))
652 |=(% style="width: 160px;" %)(((
653 HSW1766
654 )))|(% style="width:452px" %)(((
655 Ethernet2 Local mask IP address high byte 1
656 )))
657 |=(% style="width: 160px;" %)(((
658 HSW1767
659 )))|(% style="width:452px" %)(((
660 Ethernet2 Local mask IP address high byte 2
661 )))
662 |=(% style="width: 160px;" %)(((
663 HSW1768
664 )))|(% style="width:452px" %)Ethernet2 Local mask IP address high byte 3
665 |=(% style="width: 160px;" %)HSW1769|(% style="width:452px" %)Ethernet2 Local mask IP address high byte 4
666 |=(% style="width: 160px;" %)(((
667 HSW1770
668 )))|(% style="width:452px" %)(((
669 Ethernet2 Local gateway IP address high byte 1
670 )))
671 |=(% style="width: 160px;" %)(((
672 HSW1771
673 )))|(% style="width:452px" %)(((
674 Ethernet2 Local gateway IP address high byte 2
675 )))
676 |=(% style="width: 160px;" %)(((
677 HSW1772
678 )))|(% style="width:452px" %)(((
679 Ethernet2 Local gateway IP address high byte 3
680 )))
681 |=(% style="width: 160px;" %)(((
682 HSW1773
683 )))|(% style="width:452px" %)(((
684 Ethernet2 Local gateway IP address high byte 4
685 )))
686 |=(% style="width: 160px;" %)(((
687 HSW1774
688 )))|(% style="width:452px" %)(((
689 Ethernet2 Local Port Address
690 )))
691 |=(% style="width: 160px;" %)(((
692 HSW1775
693 )))|(% colspan="1" rowspan="6" style="width:282px" %)(((
694 ①Display the MAC code of Ethernet2 NIC
695
696 (hexadecimal display)
697
698 ②Read-only mode, not modifiable
699 )))|(% style="width:452px" %)(((
700 Ethernet2 Local MAC code high byte 1
701 )))
702 |=(% style="width: 160px;" %)(((
703 HSW1776
704 )))|(% style="width:452px" %)(((
705 Ethernet2 Local MAC code high byte 2
706 )))
707 |=(% style="width: 160px;" %)(((
708 HSW1777
709 )))|(% style="width:452px" %)(((
710 Ethernet2 Local MAC code high byte 3
711 )))
712 |=(% style="width: 160px;" %)(((
713 HSW1778
714 )))|(% style="width:452px" %)(((
715 Ethernet2 Local MAC code high byte 4
716 )))
717 |=(% style="width: 160px;" %)(((
718 HSW1779
719 )))|(% style="width:452px" %)(((
720 Ethernet2 Local MAC code high byte 5
721 )))
722 |=(% style="width: 160px;" %)(((
723 HSW1780
724 )))|(% style="width:452px" %)(((
725 Ethernet2 Local MAC code high byte 6
726 )))
727 |=(% style="width: 160px;" %)(((
728 HSW1781
729 )))|(% colspan="1" rowspan="8" style="width:282px" %)(((
730 ①Display and modify DNS1 and DNS2 of Ethernet2
731
732 ②Related registers can be read and written mode (only static IP mode can be written)
733 )))|(% style="width:452px" %)(((
734 Ethernet2 Local DNS1 address high byte 1
735 )))
736 |=(% style="width: 160px;" %)(((
737 HSW1782
738 )))|(% style="width:452px" %)(((
739 Ethernet2 Local DNS1 address high byte 2
740 )))
741 |=(% style="width: 160px;" %)(((
742 HSW1783
743 )))|(% style="width:452px" %)(((
744 Ethernet2 Local DNS1 address high byte 3
745 )))
746 |=(% style="width: 160px;" %)(((
747 HSW1784
748 )))|(% style="width:452px" %)(((
749 Ethernet2 Local DNS1 address high byte 4
750 )))
751 |=(% style="width: 160px;" %)(((
752 HSW1785
753 )))|(% style="width:452px" %)(((
754 Ethernet2 Local DNS2 address high byte 1
755 )))
756 |=(% style="width: 160px;" %)(((
757 HSW1786
758 )))|(% style="width:452px" %)(((
759 Ethernet2 Local DNS2 address high byte 2
760 )))
761 |=(% style="width: 160px;" %)(((
762 HSW1787
763 )))|(% style="width:452px" %)(((
764 Ethernet2 Local DNS2 address high byte 3
765 )))
766 |=(% style="width: 160px;" %)(((
767 HSW1788
768 )))|(% style="width:452px" %)(((
769 Ethernet2 Local DNS2 address high byte 4
770 )))
771 |=(% style="width: 160px;" %)(((
772 HSW1789
773 )))|(% colspan="1" style="width:282px" %)(((
774 Display or set the dynamic or static IP mode of Ethernet2
775 )))|(% style="width:452px" %)(((
776 HSX1789.0 = 0, Static IP mode
777
778 HSX1789.0 = 1, dynamic IP mode
779 )))
780 |=(% style="width: 160px;" %)(((
781 HSW1790
782 )))|(% colspan="1" style="width:282px" %)(((
783 Confirm Ethernet2 IP, subnet mask, gateway, DNS1, DNS2, and dynamic static IP settings
784 )))|(% style="width:452px" %)(((
785 ~= 1, confirm the setting (i.e., after modifying IP-related information, set this address to 1, representing confirmation of the modification, after which it will be reset to 0)
786 )))
787 |=(% style="width: 160px;" %)(((
788 HSW1791
789 )))|(% colspan="1" style="width:282px" %)(((
790 Network status of the Ethernet2 connection server
791 )))|(% style="width:452px" %)(((
792 ~= 0, connection to the server is abnormal = 1, connection to the server is normal
793 )))
794 |=(% style="width: 160px;" %)HSW1852|(% style="width:282px" %)Control the interval in two consecutive clicks|(% style="width:452px" %)Limit range: 1~~500ms. The default is 100 ms.
795 |=(% style="width: 160px;" %)HSW1853|(% style="width:282px" %)File format for exporting data records to USB flash drive or SD card|(% style="width:452px" %)(((
796 * =0: db database
797 * =1: CSV
798
799 (Only valid for script function DbToCsvFile)
800 )))
801 |=(% style="width: 160px;" %)HSW1854|(% style="width:282px" %)High and low word conversion type|(% style="width:452px" %)(((
802 * =0: use the old high-low word conversion (default)
803 * =1: usie the new high-low word conversion
804 )))
805 |=(% style="width: 160px;" %)HSW1855|(% style="width:282px" %)Screen Lock prompt display control|(% style="width:452px" %)(((
806 Control whether the screen lock prompt is displayed,
807
808 * =0: display(default value)
809 * =Other: no display.
810 )))
811 |=(% style="width: 160px;" %)HSW1856|(% style="width:282px" %)Display map fence drawing status|(% style="width:452px" %)(((
812 * =0: no map fence
813 * =1: The map fence is drawn and the device is inside the fence
814 * =2: The map fence is drawn and the device is outside the fence
815 )))
816 |=(% style="width: 160px;" %)HSW1857|(% style="width:282px" %)USB disk download |(% style="width:452px" %)(((
817 * =0: download project
818 * =1: download firmware
819 * =2: enter the background
820 )))
821 |=(% style="width: 160px;" %)HSW1865|(% style="width:282px" %)Priority connection to the cloud|(% style="width:452px" %)(((
822 * =0: priority Ethernet
823 * =1: priority WLAN
824 * =2: priority 4G
825 )))
826 |=(% style="width: 160px;" %)HSW1866|(% style="width:282px" %)Delete the Lua extension module file|(% style="width:452px" %)(((
827 * =0: delete;
828 * = Others: do not delete
829 )))
830 |=(% style="width: 160px;" %)HSW1867|(% style="width:282px" %)Reset mode|(% style="width:452px" %)(((
831 Monitor address is set during reset of reset switch, whether to cancel reset,
832
833 * = 0: yes (default);
834 * = 1: no
835 )))
836 |=(% style="width: 160px;" %)HSW1868|(% style="width:282px" %)Double-click or long press the record type table mode|(% style="width:452px" %)(((
837 Controls whether the button pops up when double-clicking or long pressing on record type table object
838
839 * = 0: yes (default);
840 * = 1: no
841 )))
842 |=(% style="width: 160px;" %)(((
843 HSW1869
844 )))|(% style="width:282px" %)(((
845 Dynamic screensaver countdown
846 )))|(% style="width:452px" %)(((
847 Countdown to enter dynamic screensaver effect, unit (S)
848 )))
849 |=(% style="width: 160px;" %)(((
850 HSW1870
851 )))|(% style="width:282px" %)(((
852 Display or set the dynamic or static IP mode of Ethernet1
853 )))|(% style="width:452px" %)(((
854 HSX1870.0 = 0, Static IP mode
855
856 HSX1870.0 = 1, dynamic IP mode
857 )))
858 |=(% style="width: 160px;" %)(((
859 HSW1871
860 )))|(% style="width:282px" %)(((
861 Confirm the IP, subnet mask, gateway, DNS1, DNS2, and dynamic static IP settings for Ethernet1
862 )))|(% style="width:452px" %)(((
863 ~= 1, confirm the setting (i.e., after modifying IP-related information, set this address to 1, representing confirmation of the modification, after which it will be reset to 0)
864 )))
865 |=(% style="width: 160px;" %)(((
866 HSW1872
867 )))|(% colspan="1" rowspan="8" style="width:282px" %)(((
868 ①Display and modify DNS1 and DNS2 of Ethernet1
869
870 ②Related registers can be read and written mode (only static IP mode can be written)
871 )))|(% style="width:452px" %)(((
872 Ethernet1 Local DNS1 address high byte 1
873 )))
874 |=(% style="width: 160px;" %)(((
875 HSW1873
876 )))|(% style="width:452px" %)Ethernet1 Local DNS1 address high byte 2
877 |=(% style="width: 160px;" %)(((
878 HSW1874
879 )))|(% style="width:452px" %)Ethernet1 Local DNS1 address high byte 3
880 |=(% style="width: 160px;" %)(((
881 HSW1875
882 )))|(% style="width:452px" %)Ethernet1 Local DNS1 address high byte 4
883 |=(% style="width: 160px;" %)(((
884 HSW1876
885 )))|(% style="width:452px" %)Ethernet1 Local DNS2 address high byte 1
886 |=(% style="width: 160px;" %)(((
887 HSW1877
888 )))|(% style="width:452px" %)Ethernet1 Local DNS2 address high byte 2
889 |=(% style="width: 160px;" %)(((
890 HSW1878
891 )))|(% style="width:452px" %)Ethernet1 Local DNS2 address high byte 3
892 |=(% style="width: 160px;" %)(((
893 HSW1879
894 )))|(% style="width:452px" %)Ethernet1 Local DNS2 address high byte 4
895 |=(% style="width: 160px;" %)HSW1890|(% colspan="1" style="width:282px" %)Enable refresh current network signal|(% style="width:452px" %)(((
896 * =1: Refresh the network signal once after triggered (This register will be automatically reset after triggered, only update the signal value once after per 15 seconds, not able to update twice in the short interval)
897 * =Others: not refresh
898 )))
899 |=(% style="width: 160px;" %)HSW1891|(% colspan="1" style="width:282px" %)Enable clear cache for screen data  |(% style="width:452px" %)(((
900 * =1, not clear screen cache when switch language
901 * =2, trigger clear cache of all screens for once time
902 * =3, always clear cache of all screen data
903 )))
904 |=(% style="width: 160px;" %)HSW10000~~19999|(% style="width:282px" %)Power-down storage area|(% style="width:452px" %)After restart, the data remains
905 |=(% style="width: 160px;" %)HSW10035|(% rowspan="13" style="width:282px" %)(((
906 Note: Valid when Ethernet1 of HMI is plugged into the network cable.
907 ①、When the Ethernet setting is enabled in the project parameters, this register displays the set value.
908 ②. When the Ethernet setting is not enabled in the engineering parameters, the register displays the Ethernet IP automatically acquired by the HMI.
909 ③. When the HMI is not plugged into the network cable, the register will show 0 whether the engineering parameters are set or not.
910 ④.IP related registers can be read and written (only static IP mode can be written).
911 )))|(% style="width:452px" %)Local IP address high byte 1
912 |=(% style="width: 160px;" %)HSW10036|(% style="width:452px" %)Local IP address high byte 2
913 |=(% style="width: 160px;" %)HSW10037|(% style="width:452px" %)Local IP address high byte 3
914 |=(% style="width: 160px;" %)HSW10038|(% style="width:452px" %)Local IP address high byte 4
915 |=(% style="width: 160px;" %)HSW10039|(% style="width:452px" %)Local mask IP address high byte 1
916 |=(% style="width: 160px;" %)HSW10040|(% style="width:452px" %)Local mask IP address high byte 2
917 |=(% style="width: 160px;" %)HSW10041|(% style="width:452px" %)Local mask IP address high byte 3
918 |=(% style="width: 160px;" %)HSW10042|(% style="width:452px" %)Local mask IP address high byte 4
919 |=(% style="width: 160px;" %)HSW10043|(% style="width:452px" %)Local gateway address high byte 1
920 |=(% style="width: 160px;" %)HSW10044|(% style="width:452px" %)Local gateway address high byte 2
921 |=(% style="width: 160px;" %)HSW10045|(% style="width:452px" %)Local gateway address high byte 3
922 |=(% style="width: 160px;" %)HSW10046|(% style="width:452px" %)Local gateway address high byte 4
923 |=(% style="width: 160px;" %)HSW10047|(% style="width:452px" %)Local port address
924 |=(% style="width: 160px;" %)HSW10048|(% rowspan="6" style="width:282px" %)(((
925 ①Display the MAC code of Ethernet1 NIC
926
927 (hexadecimal display)
928
929 ②Read-only mode, not modifiable
930 )))|(% style="width:452px" %)Local MAC code high word 1
931 |=(% style="width: 160px;" %)HSW10049|(% style="width:452px" %)Local MAC code high word 2
932 |=(% style="width: 160px;" %)HSW10050|(% style="width:452px" %)Local MAC code high word 3
933 |=(% style="width: 160px;" %)HSW10051|(% style="width:452px" %)Local MAC code high word 4
934 |=(% style="width: 160px;" %)HSW10052|(% style="width:452px" %)Local MAC code high word 5
935 |=(% style="width: 160px;" %)HSW10053|(% style="width:452px" %)Local MAC code high word 6
936 |=(% style="width: 160px;" %)HSW10118|(% colspan="1" rowspan="2" style="width:282px" %)TSAP settings for HMI in the Siemens LOGO! 8 protocol|(% style="width:452px" %)HMI local TSAP, which corresponds to the remote TSAP of PLC
937 |=(% style="width: 160px;" %)HSW10119|(% style="width:452px" %)HMI remote TSAP, which corresponds to the local TSAP of PLC
938 |=(% style="width: 160px;" %)HSW10461~~10493|(% style="width:282px" %)Remote access password|(% style="width:452px" %)8-character remote access password
939 |=(% style="width: 160px;" %)HSW10494~~10558|(% style="width:282px" %)Machine ID (Read only)|(% style="width:452px" %)Machine ID for remote access (read only 64-bit)
940 |=(% style="width: 160px;" %)HSW10576|(% style="width:282px" %)Save dynamic installment settings|(% style="width:452px" %)HSX10576.0=1: Save the set dynamic installment information
941 |=(% style="width: 160px;" %)HSW10577|(% style="width:282px" %)Control address for installment|(% style="width:452px" %)(((
942 * HSX10577.0=0: disable dynamic installment
943 * HSX10577.0=1: enable dynamic installment
944 * HSX10577.1=0: disable static installment
945 * HSX10577.1=1: enable static installment
946 )))
947 |=(% style="width: 160px;" %)HSW10578-10583|(% style="width:282px" %)Password for dynamic installment|(% style="width:452px" %)Character Input/ Display (length: 6)
948 |=(% style="width: 160px;" %)HSW10584-10586|(% style="width:282px" %)Expiry time of dynamic installment|(% style="width:452px" %)Expiry time: YYYYMMDD (Numeric Input/ Display)
949 |=(% style="width: 160px;" %)HSW10587-10589|(% style="width:282px" %)Last expiry time of dynamic installment|(% style="width:452px" %)Expiry time: YYYYMMDD (Numeric Input/ Display)
950 |=(% style="width: 160px;" %)HSW10590|(% style="width:282px" %)Background light time|(% style="width:452px" %)(((
951 Set the light time for background
952
953 * =0: The screen backlight is always on.
954 * =Others: The screen backlight is on for a period of time and then turns off. The length of time is controlled by the value of the register address. Unit: second.
955 )))
956 |=(% style="width: 160px;" %)HSW10591|(% style="width:282px" %)Backlight brightness adjustment|(% style="width:452px" %)Backlight brightness range: 1 (darkest) ~~ 100 (brightest)
957 |=(% style="width: 160px;" %)HSW10603|(% style="width:282px" %)Set the printer to print orientation|(% style="width:452px" %)(((
958 Set the print direction:
959
960 * =1: Forward printing
961 * =2: Reverse print
962 * =Other: Forward print
963 )))
964 |=(% style="width: 160px;" %)HSW10604|(% style="width:282px" %)Print dot type|(% style="width:452px" %)(((
965 * =1: new firmware 8 dot matrix type
966 * =2: new firmware 24 dot matrix type
967 * =3: old firmware 8 dot matrix type
968 * =4: old firmware 24 dot matrix type
969 * =Other: new firmware 8 dot matrix type
970 )))
971 |=(% style="width: 160px;" %)HSW10605|(% style="width:282px" %)Print width of printer|(% style="width:452px" %)Set the width of the printer to print (in pixels), such as HSW10605 = 394: The printer supports images with a print width of 394 pixels
972 |=(% style="width: 160px;" %)HSW10606|(% style="width:282px" %)Printer instruction type|(% style="width:452px" %)(((
973 * =1: Graphic print type
974 * =2: Dot density printing type
975 * =3: special for EPSON printer
976 )))
977 |=(% style="width: 160px;" %)HSW10607|(% style="width:282px" %)Printer paper cutting function|(% style="width:452px" %)(((
978 * =1: Enable
979 * =2: Disable
980 )))
981 |=(% style="width: 160px;" %)HSW10608|(% style="width:282px" %)Print the alignment of the text|(% style="width:452px" %)(((
982 * =1: Left alignment
983 * =2: Center alignment
984 * =3: Right alignment
985 )))
986 |=(% style="width: 160px;" %)HSW10610|(% style="width:282px" %)Set weconcloud server|(% style="width:452px" %)(((
987 * =0: Select the server configured in "Project Settings"
988 * =1: select Server 1
989 * =2: select Server 2
990 )))
991 |=(% style="width: 160px;" %)HSW11750|(% style="width:282px" %)Set the language of the Message List prompt** (ie series)**|(% style="width:452px" %)(((
992 * =0: which is followed the project language
993 * =1: English
994 * =2: Chinese
995 )))
996 |=(% style="width: 160px;" %)HSW11756|(% style="width:282px" %)(((
997 Access permission restrictions
998
999 (ig series and** **8000/9000 series with -R after system upgrade)
1000 )))|(% style="width:452px" %)(((
1001 * =0: LAN or the external network both OK
1002 * =1: Only LAN access
1003 * =2: Only external network can access
1004 )))
1005 |=(% style="width: 160px;" %)HSW11757|(% style="width:282px" %)Enable the valid date of the dynamic installment password|(% style="width:452px" %)(((
1006 * =0: Disabled
1007 * =1: Enable
1008 )))
1009 |=(% style="width: 160px;" %)HSW11758|(% style="width:282px" %)Enable Screensaver|(% style="width:452px" %)(((
1010 * =0: Disabled
1011 * =1: Enable
1012 )))
1013 |=(% style="width: 160px;" %)HSW11759|(% style="width:282px" %)Screensaver interval time|(% style="width:452px" %)(((
1014 Set the time how long will enter Screensaver (Range 10~~43200s)
1015 )))
1016 |=(% style="width: 160px;" %)HSW11760|(% style="width:282px" %)Screensaver countdown|(% style="width:452px" %)Display the countdown to enter the Screensaver, unit: second.
1017 |=(% style="width: 160px;" %)HSW11761|(% style="width:282px" %)Screensaver screen number|(% style="width:452px" %)Set the screen number for Screensaver
1018 |=(% style="width: 160px;" %)(((
1019 HSW11762
1020 )))|(% style="width:282px" %)(((
1021 Dynamic screensaver control address
1022 )))|(% style="width:452px" %)(((
1023 HSX11762.0=0, initialize with project configuration;
1024
1025 HSX11762.0=1, initialize with special register configuration;
1026
1027 HSX11762.1=0, disable dynamic screensaver;
1028
1029 HSX11762.1=1, enable dynamic screensaver
1030 )))
1031 |=(% style="width: 160px;" %)(((
1032 HSW11763
1033 )))|(% style="width:282px" %)(((
1034 Waiting time to enter the dynamic screensaver
1035 )))|(% style="width:452px" %)(((
1036 Waiting time when the screen is not operated, range 1~~720 minutes
1037 )))
1038 |=(% style="width: 160px;" %)(((
1039 HSW11764
1040 )))|(% style="width:282px" %)(((
1041 Animated screensaver animation type
1042 )))|(% style="width:452px" %)(((
1043 ~=0: Raster,=1: Blinds,=2: Bubble
1044 )))
1045
1046 == Serial port communication configuration ==
1047
1048 (% class="table-bordered" %)
1049 |=(% scope="row" style="width: 102px;" %)Port|=(% style="width: 173px;" %)**Function**|=(% style="width: 122px;" %)**Address**|=(% colspan="2" style="width: 506px;" %)**Description**
1050 |(% colspan="1" rowspan="11" style="width:102px" %)COM1|(% style="width:173px" %)Communication mode|(% style="width:122px" %)HSW10061|(% colspan="2" style="width:506px" %)(((
1051 * =0: RS232
1052 * =1: RS485
1053 * =2: RS422
1054 )))
1055 |(% style="width:173px" %)Baud rate|(% style="width:122px" %)HSW10062|(% colspan="2" style="width:506px" %)(((
1056 * =0: 1200
1057 * =1: 2400
1058 * =2: 4800
1059 * =3: 9600
1060 * =4: 19200
1061 * =5: 38400
1062 * =6: 57600
1063 * =7: 115200
1064 * =8: 230400
1065 )))
1066 |(% style="width:173px" %)Data bit|(% style="width:122px" %)HSW10063|(% colspan="2" style="width:506px" %)(((
1067 * =7: 7 bit
1068 * =8: 8 bit
1069 )))
1070 |(% style="width:173px" %)Stop bit|(% style="width:122px" %)HSW10064|(% colspan="2" style="width:506px" %)(((
1071 * =1: 1 bit
1072 * =2: 2 bit
1073 )))
1074 |(% style="width:173px" %)Check bit|(% style="width:122px" %)HSW10065|(% colspan="2" style="width:506px" %)(((
1075 * =0: None
1076 * =1: ODD
1077 * =2: EVEN
1078 )))
1079 |(% style="width:173px" %)Wait timeout|(% style="width:122px" %)HSW10066|(% colspan="2" style="width:506px" %)(((
1080 * Unit: ms.
1081 * Range: 0 to 30000
1082 )))
1083 |(% style="width:173px" %)reveive timeout|(% style="width:122px" %)HSW10067|(% colspan="2" style="width:506px" %)(((
1084 * Unit: ms.
1085 * Range: 0 to 30000
1086 )))
1087 |(% style="width:173px" %)Retry time|(% style="width:122px" %)HSW10068|(% colspan="2" style="width:506px" %)(((
1088 * Unit: times.
1089 * Range: 0 to 100
1090 )))
1091 |(% style="width:173px" %)Retry timeout|(% style="width:122px" %)HSW10069|(% colspan="2" style="width:506px" %)(((
1092 * Unit: s.
1093 * Range: 0 to 300
1094 )))
1095 |(% style="width:173px" %)HMI station number|(% style="width:122px" %)HSW10070|(% colspan="2" style="width:506px" %)
1096 |(% style="width:173px" %)PLC station number|(% style="width:122px" %)HSW10071|(% colspan="2" style="width:506px" %)
1097 |(% colspan="1" rowspan="11" style="width:102px" %)COM1-2|(% style="width:173px" %)Communication mode|(% style="width:122px" %)HSW10094|(% colspan="2" style="width:506px" %)(((
1098 * =0: RS232
1099 * =1: RS485
1100 * =2: RS422
1101 * =6: RS485-2
1102 )))
1103 |(% style="width:173px" %)Baud rate|(% style="width:122px" %)HSW10095|(% colspan="2" style="width:506px" %)(((
1104 * =0: 1200
1105 * =1: 2400
1106 * =2: 4800
1107 * =3: 9600
1108 * =4: 19200
1109 * =5: 38400
1110 * =6: 57600
1111 * =7: 115200
1112 * =8: 230400
1113 )))
1114 |(% style="width:173px" %)Data bit|(% style="width:122px" %)HSW10096|(% colspan="2" style="width:506px" %)(((
1115 * =7: 7 bit
1116 * =8: 8 bit
1117 )))
1118 |(% style="width:173px" %)Stop bit|(% style="width:122px" %)HSW10097|(% colspan="2" style="width:506px" %)(((
1119 * =1: 1 bit
1120 * =2: 2 bit
1121 )))
1122 |(% style="width:173px" %)Check bit|(% style="width:122px" %)HSW10098|(% colspan="2" style="width:506px" %)(((
1123 * =0: None
1124 * =1: ODD
1125 * =2: EVEN
1126 )))
1127 |(% style="width:173px" %)Wait timeout|(% style="width:122px" %)HSW10099|(% colspan="2" style="width:506px" %)(((
1128 * Unit: ms.
1129 * Range: 0 to 30000
1130 )))
1131 |(% style="width:173px" %)receive timeout|(% style="width:122px" %)HSW10100|(% colspan="2" style="width:506px" %)(((
1132 * Unit: ms.
1133 * Range: 0 to 30000
1134 )))
1135 |(% style="width:173px" %)Retry time|(% style="width:122px" %)HSW10101|(% colspan="2" style="width:506px" %)(((
1136 * Unit: times.
1137 * Range: 0 to 100
1138 )))
1139 |(% style="width:173px" %)Retry timeout|(% style="width:122px" %)HSW10102|(% colspan="2" style="width:506px" %)(((
1140 * Unit: s.
1141 * Range: 0 to 30
1142 )))
1143 |(% style="width:173px" %)HMI station number|(% style="width:122px" %)HSW10103|(% colspan="2" style="width:506px" %)
1144 |(% style="width:173px" %)PLC station number|(% style="width:122px" %)HSW10104|(% colspan="2" style="width:506px" %)
1145 |(% colspan="1" rowspan="11" style="width:102px" %)COM1-3|(% style="width:173px" %)Communication mode|(% style="width:122px" %)HSW10120|(% colspan="2" style="width:506px" %)(((
1146 * =0: RS232
1147 * =1: RS485
1148 * =2: RS422
1149 * =6: RS485-2
1150 )))
1151 |(% style="width:173px" %)Baud rate|(% style="width:122px" %)HSW10121|(% colspan="2" style="width:506px" %)(((
1152 * =0: 1200
1153 * =1: 2400
1154 * =2: 4800
1155 * =3: 9600
1156 * =4: 19200
1157 * =5: 38400
1158 * =6: 57600
1159 * =7: 115200
1160 * =8: 230400
1161 )))
1162 |(% style="width:173px" %)Data bit|(% style="width:122px" %)HSW10122|(% colspan="2" style="width:506px" %)(((
1163 * =7: 7 bit
1164 * =8: 8 bit
1165 )))
1166 |(% style="width:173px" %)Stop bit|(% style="width:122px" %)HSW10123|(% colspan="2" style="width:506px" %)(((
1167 * =1: 1 bit
1168 * =2: 2 bit
1169 )))
1170 |(% style="width:173px" %)Check bit|(% style="width:122px" %)HSW10124|(% colspan="2" style="width:506px" %)(((
1171 * =0: None
1172 * =1: ODD
1173 * =2: EVEN
1174 )))
1175 |(% style="width:173px" %)Wait timeout|(% style="width:122px" %)HSW10125|(% colspan="2" style="width:506px" %)(((
1176 * Unit: ms.
1177 * Range: 0 to 30000
1178 )))
1179 |(% style="width:173px" %)receive timeout|(% style="width:122px" %)HSW10126|(% colspan="2" style="width:506px" %)(((
1180 * Unit: ms.
1181 * Range: 0 to 30000
1182 )))
1183 |(% style="width:173px" %)Retry time|(% style="width:122px" %)HSW10127|(% colspan="2" style="width:506px" %)(((
1184 * Unit: times.
1185 * Range: 0 to 100
1186 )))
1187 |(% style="width:173px" %)Retry timeout|(% style="width:122px" %)HSW10128|(% colspan="2" style="width:506px" %)(((
1188 * Unit: s.
1189 * Range: 0 to 30
1190 )))
1191 |(% style="width:173px" %)HMI station number|(% style="width:122px" %)HSW10129|(% colspan="2" style="width:506px" %)
1192 |(% style="width:173px" %)PLC station number|(% style="width:122px" %)HSW10130|(% colspan="2" style="width:506px" %)
1193 |(% colspan="1" rowspan="11" style="width:102px" %)COM2|(% style="width:173px" %)Communication mode|(% style="width:122px" %)HSW10072|(% colspan="2" style="width:506px" %)(((
1194 * =0: RS232
1195 * =1: RS485
1196 )))
1197 |(% style="width:173px" %)Baud rate|(% style="width:122px" %)HSW10073|(% colspan="2" style="width:506px" %)(((
1198 * =0: 1200
1199 * =1: 2400
1200 * =2: 4800
1201 * =3: 9600
1202 * =4: 19200
1203 * =5: 38400
1204 * =6: 57600
1205 * =7: 115200
1206 * =8: 230400
1207 )))
1208 |(% style="width:173px" %)Data bit|(% style="width:122px" %)HSW10074|(% colspan="2" style="width:506px" %)(((
1209 * =7: 7 bit
1210 * =8: 8 bit
1211 )))
1212 |(% style="width:173px" %)Stop bit|(% style="width:122px" %)HSW10075|(% colspan="2" style="width:506px" %)(((
1213 * =1: 1 bit
1214 * =2: 2 bit
1215 )))
1216 |(% style="width:173px" %)Check bit|(% style="width:122px" %)HSW10076|(% colspan="2" style="width:506px" %)(((
1217 * =0: None
1218 * =1: ODD
1219 * =2: EVEN
1220 )))
1221 |(% style="width:173px" %)Wait timeout|(% style="width:122px" %)HSW10077|(% colspan="2" style="width:506px" %)(((
1222 * Unit: ms.
1223 * Range: 0 to 30000
1224 )))
1225 |(% style="width:173px" %)receive timeout|(% style="width:122px" %)HSW10078|(% colspan="2" style="width:506px" %)(((
1226 * Unit: ms.
1227 * Range: 0 to 30000
1228 )))
1229 |(% style="width:173px" %)Retry time|(% style="width:122px" %)HSW10079|(% colspan="2" style="width:506px" %)(((
1230 * Unit: times.
1231 * Range: 0 to 100
1232 )))
1233 |(% style="width:173px" %)Retry timeout|(% style="width:122px" %)HSW10080|(% colspan="2" style="width:506px" %)(((
1234 * Unit: s.
1235 * Range: 0 to 30
1236 )))
1237 |(% style="width:173px" %)HMI station number|(% style="width:122px" %)HSW10081|(% colspan="2" style="width:506px" %)
1238 |(% style="width:173px" %)PLC station number|(% style="width:122px" %)HSW10082|(% colspan="2" style="width:506px" %)
1239 |(% colspan="1" rowspan="11" style="width:102px" %)COM2-2|(% style="width:173px" %)Communication mode|(% style="width:122px" %)HSW10105|(% colspan="2" style="width:506px" %)(((
1240 * =0: RS232
1241 * =1: RS485
1242 )))
1243 |(% style="width:173px" %)Baud rate|(% style="width:122px" %)HSW10106|(% colspan="2" style="width:506px" %)(((
1244 * =0: 1200
1245 * =1: 2400
1246 * =2: 4800
1247 * =3: 9600
1248 * =4: 19200
1249 * =5: 38400
1250 * =6: 57600
1251 * =7: 115200
1252 * =8: 230400
1253 )))
1254 |(% style="width:173px" %)Data bit|(% style="width:122px" %)HSW10107|(% colspan="2" style="width:506px" %)(((
1255 * =7: 7 bit
1256 * =8: 8 bit
1257 )))
1258 |(% style="width:173px" %)Stop bit|(% style="width:122px" %)HSW10108|(% colspan="2" style="width:506px" %)(((
1259 * =1: 1 bit
1260 * =2: 2 bit
1261 )))
1262 |(% style="width:173px" %)Check bit|(% style="width:122px" %)HSW10109|(% colspan="2" style="width:506px" %)(((
1263 * =0: None
1264 * =1: ODD
1265 * =2: EVEN
1266 )))
1267 |(% style="width:173px" %)Wait timeout|(% style="width:122px" %)HSW10110|(% colspan="2" style="width:506px" %)(((
1268 * Unit: ms.
1269 * Range: 0 to 30000
1270 )))
1271 |(% style="width:173px" %)receive timeout|(% style="width:122px" %)HSW10111|(% colspan="2" style="width:506px" %)(((
1272 * Unit: ms.
1273 * Range: 0 to 30000
1274 )))
1275 |(% style="width:173px" %)Retry time|(% style="width:122px" %)HSW10112|(% colspan="2" style="width:506px" %)(((
1276 * Unit: times.
1277 * Range: 0 to 100
1278 )))
1279 |(% style="width:173px" %)Retry timeout|(% style="width:122px" %)HSW10113|(% colspan="2" style="width:506px" %)(((
1280 * Unit: s.
1281 * Range: 0 to 30
1282 )))
1283 |(% style="width:173px" %)HMI station number|(% style="width:122px" %)HSW10114|(% colspan="2" style="width:506px" %)
1284 |(% style="width:173px" %)PLC station number|(% style="width:122px" %)HSW10115|(% colspan="2" style="width:506px" %)
1285 |(% colspan="1" rowspan="11" style="width:102px" %)COM3|(% style="width:173px" %)Communication mode|(% style="width:122px" %)HSW10083|(% colspan="2" style="width:506px" %)(((
1286 * =1: RS485
1287 )))
1288 |(% style="width:173px" %)Baud rate|(% style="width:122px" %)HSW10084|(% colspan="2" style="width:506px" %)(((
1289 * =0: 1200
1290 * =1: 2400
1291 * =2: 4800
1292 * =3: 9600
1293 * =4: 19200
1294 * =5: 38400
1295 * =6: 57600
1296 * =7: 115200
1297 * =8: 230400
1298 )))
1299 |(% style="width:173px" %)Data bit|(% style="width:122px" %)HSW10085|(% colspan="2" style="width:506px" %)(((
1300 * =7: 7 bit
1301 * =8: 8 bit
1302 )))
1303 |(% style="width:173px" %)Stop bit|(% style="width:122px" %)HSW10086|(% colspan="2" style="width:506px" %)(((
1304 * =1: 1 bit
1305 * =2: 2 bit
1306 )))
1307 |(% style="width:173px" %)Check bit|(% style="width:122px" %)HSW10087|(% colspan="2" style="width:506px" %)(((
1308 * =0: None
1309 * =1: ODD
1310 * =2: EVEN
1311 )))
1312 |(% style="width:173px" %)Wait timeout|(% style="width:122px" %)HSW10088|(% colspan="2" style="width:506px" %)(((
1313 * Unit: ms.
1314 * Range: 0 to 30000
1315 )))
1316 |(% style="width:173px" %)receive timeout|(% style="width:122px" %)HSW10089|(% colspan="2" style="width:506px" %)(((
1317 * Unit: ms.
1318 * Range: 0 to 30000
1319 )))
1320 |(% style="width:173px" %)Retry time|(% style="width:122px" %)HSW10090|(% colspan="2" style="width:506px" %)(((
1321 * Unit: times.
1322 * Range: 0 to 100
1323 )))
1324 |(% style="width:173px" %)Retry timeout|(% style="width:122px" %)HSW10091|(% colspan="2" style="width:506px" %)(((
1325 * Unit: s.
1326 * Range: 0 to 30
1327 )))
1328 |(% style="width:173px" %)HMI station number|(% style="width:122px" %)HSW10092|(% colspan="2" style="width:506px" %)
1329 |(% style="width:173px" %)PLC station number|(% style="width:122px" %)HSW10093|(% colspan="2" style="width:506px" %)
1330 |(% colspan="1" rowspan="2" style="width:102px" %)CAN port|(% style="width:173px" %)CAN1 baud rate|(% style="width:122px" %)HSW010116|(% style="width:299px" %)(((
1331 Unit: K, the baud rate must be an integer.
1332
1333 For example, when the baud rate required is 250000, just enter 250.
1334 )))|(% colspan="1" rowspan="2" style="width:218px" %)**✎Note: **If baud rate has been modified,please wait 5 seconds,then restart the HMI to take effect.
1335 |(% style="width:173px" %)CAN2 baud rate|(% style="width:122px" %)HSW010117|(% style="width:299px" %)(((
1336 Unit: K, the baud rate must be an integer.
1337
1338 For example, when the baud rate required is 250000, just enter 250.
1339 )))
1340
1341 == Ethernet communication configuration ==
1342
1343 (% class="table-bordered" %)
1344 |(% style="width:40px" %)**No.**|(% style="width:295px" %)**Function**|(% style="width:220px" %)**Address**|(% style="width:336px" %)**Description**
1345 |(% rowspan="7" style="width:40px" %)1|(% colspan="1" rowspan="7" style="width:295px" %)Ethernet parameter configuration for communication number 1 in list. Configure those addresses according to connected device. After configuration, wait for 5 seconds and restart the HMI.|(% style="width:220px" %)HSW11004|(% style="width:336px" %)Device IP address high word 1
1346 |(% style="width:220px" %)HSW11005|(% style="width:336px" %)Device IP address high word 2
1347 |(% style="width:220px" %)HSW11006|(% style="width:336px" %)Device IP address high word 3
1348 |(% style="width:220px" %)HSW11007|(% style="width:336px" %)Device IP address high word 4
1349 |(% style="width:220px" %)HSW11008|(% style="width:336px" %)Device Port number
1350 |(% style="width:220px" %)HSW11009|(% style="width:336px" %)(((
1351 ~=2 TCP
1352
1353 ~=3 UDP
1354 )))
1355 |(% style="width:220px" %)HSW11010|(% style="width:336px" %)Reserved
1356 |(% rowspan="7" style="width:40px" %)2|(% colspan="1" rowspan="7" style="width:295px" %)Ethernet parameter configuration for communication number 2 in list. Configure those addresses according to connected device. After configuration, wait for 5 seconds and restart the HMI.|(% style="width:220px" %)HSW11011|(% style="width:336px" %)Device IP address high word 1
1357 |(% style="width:220px" %)HSW11012|(% style="width:336px" %)Device IP address high word 2
1358 |(% style="width:220px" %)HSW11013|(% style="width:336px" %)Device IP address high word 3
1359 |(% style="width:220px" %)HSW11014|(% style="width:336px" %)Device IP address high word 4
1360 |(% style="width:220px" %)HSW11015|(% style="width:336px" %)Device Port number
1361 |(% style="width:220px" %)HSW11016|(% style="width:336px" %)(((
1362 ~=2 TCP
1363
1364 ~=3 UDP
1365 )))
1366 |(% style="width:220px" %)HSW11017|(% style="width:336px" %)Reserved
1367 |(% style="width:40px" %)…|(% style="width:295px" %) |(% style="width:220px" %)…|(% style="width:336px" %)…
1368 |(% rowspan="7" style="width:40px" %)32|(% colspan="1" rowspan="7" style="width:295px" %)Ethernet parameter configuration for communication number 32 in list. Configure those addresses according to connected device. After configuration, wait for 5 seconds and restart the HMI.|(% style="width:220px" %)HSW11221|(% style="width:336px" %)Device IP address high word 1
1369 |(% style="width:220px" %)HSW11222|(% style="width:336px" %)Device IP address high word 2
1370 |(% style="width:220px" %)HSW11223|(% style="width:336px" %)Device IP address high word 3
1371 |(% style="width:220px" %)HSW11224|(% style="width:336px" %)Device IP address high word 4
1372 |(% style="width:220px" %)HSW11225|(% style="width:336px" %)Device Port number
1373 |(% style="width:220px" %)HSW11226|(% style="width:336px" %)(((
1374 ~=2 TCP;
1375
1376 ~=3 UDP
1377 )))
1378 |(% style="width:220px" %)HSW11227|(% style="width:336px" %)Reserved
1379
1380 (% class="box infomessage" %)
1381 (((
1382 **✎Note:** The number of Ethernet connections supported by different HMI series varies.
1383 )))
1384
1385 == Communication control ==
1386
1387 (% class="table-bordered" %)
1388 |=(% style="width: 135px;" %)**Communication No.**|=(% style="width: 102px;" %)**Station No.**|=(% style="width: 185px;" %)**Control bit**|=(% style="width: 191px;" %)**Communication lamp**|=(% style="width: 271px;" %)**Description**
1389 |(% colspan="1" rowspan="16" style="width:135px" %)1|(% style="width:102px" %)0~~15|(% style="width:185px" %)HSX550.0～HSX550.15|(% style="width:191px" %)HSX558.0～HSX558.15|(% rowspan="160" style="width:271px" %)Communication number refers to the number in "Communication Port Configuration". A number provides 256 device station numbers. Each station number corresponds to a communication control bit and a communication indicator bit. Registers HSX550.0 to HSX805.15 are used to control the station numbers from 0 to 127, and registers HSX1150.0 to HSX1405.15 are used to control station numbers 128 to 255.
1390 |(% style="width:102px" %)16~~31|(% style="width:185px" %)HSX551.0～HSX551.15|(% style="width:191px" %)HSX559.0～HSX559.15
1391 |(% style="width:102px" %)32~~47|(% style="width:185px" %)HSX552.0～HSX552.15|(% style="width:191px" %)HSX560.0～HSX560.15
1392 |(% style="width:102px" %)48~~63|(% style="width:185px" %)HSX553.0～HSX553.15|(% style="width:191px" %)HSX561.0～HSX561.15
1393 |(% style="width:102px" %)64～79|(% style="width:185px" %)HSX554.0～HSX554.15|(% style="width:191px" %)HSX562.0～HSX562.15
1394 |(% style="width:102px" %)80～95|(% style="width:185px" %)HSX555.0～HSX555.15|(% style="width:191px" %)HSX563.0～HSX563.15
1395 |(% style="width:102px" %)96～111|(% style="width:185px" %)HSX556.0～HSX556.15|(% style="width:191px" %)HSX564.0～HSX564.15
1396 |(% style="width:102px" %)112～127|(% style="width:185px" %)HSX557.0～HSX557.15|(% style="width:191px" %)HSX565.0～HSX565.15
1397 |(% style="width:102px" %)128～143|(% style="width:185px" %)HSX1150.0～HSX1150.15|(% style="width:191px" %)HSX1158.0～HSX1158.15
1398 |(% style="width:102px" %)144～159|(% style="width:185px" %)HSX1151.0～HSX1151.15|(% style="width:191px" %)HSX1159.0～HSX1159.15
1399 |(% style="width:102px" %)160～175|(% style="width:185px" %)HSX1152.0～HSX1152.15|(% style="width:191px" %)HSX1160.0～HSX1160.15
1400 |(% style="width:102px" %)176～191|(% style="width:185px" %)HSX1153.0～HSX1153.15|(% style="width:191px" %)HSX1161.0～HSX1161.15
1401 |(% style="width:102px" %)192～207|(% style="width:185px" %)HSX1154.0～HSX1154.15|(% style="width:191px" %)HSX1162.0～HSX1162.15
1402 |(% style="width:102px" %)208～223|(% style="width:185px" %)HSX1155.0～HSX1155.15|(% style="width:191px" %)HSX1163.0～HSX1163.15
1403 |(% style="width:102px" %)224～239|(% style="width:185px" %)HSX1156.0～HSX1156.15|(% style="width:191px" %)HSX1164.0～HSX1164.15
1404 |(% style="width:102px" %)240～255|(% style="width:185px" %)HSX1157.0～HSX1157.15|(% style="width:191px" %)HSX1165.0～HSX1165.15
1405 |(% colspan="1" rowspan="16" style="width:135px" %)2|(% style="width:102px" %)0～15|(% style="width:185px" %)HSX566.0～HSX566.15|(% style="width:191px" %)HSX574.0～HSX574.15
1406 |(% style="width:102px" %)16～31|(% style="width:185px" %)HSX567.0～HSX567.15|(% style="width:191px" %)HSX575.0～HSX575.15
1407 |(% style="width:102px" %)32～47|(% style="width:185px" %)HSX568.0～HSX568.15|(% style="width:191px" %)HSX576.0～HSX576.15
1408 |(% style="width:102px" %)48～63|(% style="width:185px" %)HSX569.0～HSX569.15|(% style="width:191px" %)HSX577.0～HSX577.15
1409 |(% style="width:102px" %)64～79|(% style="width:185px" %)HSX570.0～HSX570.15|(% style="width:191px" %)HSX578.0～HSX578.15
1410 |(% style="width:102px" %)80～95|(% style="width:185px" %)HSX571.0～HSX571.15|(% style="width:191px" %)HSX579.0～HSX579.15
1411 |(% style="width:102px" %)96～111|(% style="width:185px" %)HSX572.0～HSX572.15|(% style="width:191px" %)HSX580.0～HSX580.15
1412 |(% style="width:102px" %)112～127|(% style="width:185px" %)HSX573.0～HSX573.15|(% style="width:191px" %)HSX581.0～HSX581.15
1413 |(% style="width:102px" %)128～143|(% style="width:185px" %)HSX1166.0～HSX1166.15|(% style="width:191px" %)HSX1174.0～HSX1174.15
1414 |(% style="width:102px" %)144～159|(% style="width:185px" %)HSX1167.0～HSX1167.15|(% style="width:191px" %)HSX1175.0～HSX1175.15
1415 |(% style="width:102px" %)160～175|(% style="width:185px" %)HSX1168.0～HSX1168.15|(% style="width:191px" %)HSX1176.0～HSX1176.15
1416 |(% style="width:102px" %)176～191|(% style="width:185px" %)HSX1169.0～HSX1169.15|(% style="width:191px" %)HSX1177.0～HSX1177.15
1417 |(% style="width:102px" %)192～207|(% style="width:185px" %)HSX1170.0～HSX1170.15|(% style="width:191px" %)HSX1178.0～HSX1178.15
1418 |(% style="width:102px" %)208～223|(% style="width:185px" %)HSX1171.0～HSX1171.15|(% style="width:191px" %)HSX1179.0～HSX1179.15
1419 |(% style="width:102px" %)224～239|(% style="width:185px" %)HSX1172.0～HSX1172.15|(% style="width:191px" %)HSX1180.0～HSX1180.15
1420 |(% style="width:102px" %)240～255|(% style="width:185px" %)HSX1173.0～HSX1173.15|(% style="width:191px" %)HSX1181.0～HSX1181.15
1421 |(% colspan="1" rowspan="16" style="width:135px" %)3|(% style="width:102px" %)0～15|(% style="width:185px" %)HSX582.0～HSX582.15|(% style="width:191px" %)HSX590.0～HSX590.15
1422 |(% style="width:102px" %)16～31|(% style="width:185px" %)HSX583.0～HSX583.15|(% style="width:191px" %)HSX591.0～HSX591.15
1423 |(% style="width:102px" %)32～47|(% style="width:185px" %)HSX584.0～HSX584.15|(% style="width:191px" %)HSX592.0～HSX592.15
1424 |(% style="width:102px" %)48～63|(% style="width:185px" %)HSX585.0～HSX585.15|(% style="width:191px" %)HSX593.0～HSX593.15
1425 |(% style="width:102px" %)64～79|(% style="width:185px" %)HSX586.0～HSX586.15|(% style="width:191px" %)HSX594.0～HSX594.15
1426 |(% style="width:102px" %)80～95|(% style="width:185px" %)HSX587.0～HSX587.15|(% style="width:191px" %)HSX595.0～HSX595.15
1427 |(% style="width:102px" %)96～111|(% style="width:185px" %)HSX588.0～HSX588.15|(% style="width:191px" %)HSX596.0～HSX596.15
1428 |(% style="width:102px" %)112～127|(% style="width:185px" %)HSX589.0～HSX589.15|(% style="width:191px" %)HSX597.0～HSX597.15
1429 |(% style="width:102px" %)128～143|(% style="width:185px" %)HSX1182.0～HSX1182.15|(% style="width:191px" %)HSX1190.0～HSX1190.15
1430 |(% style="width:102px" %)144～159|(% style="width:185px" %)HSX1183.0～HSX1183.15|(% style="width:191px" %)HSX1191.0～HSX1191.15
1431 |(% style="width:102px" %)160～175|(% style="width:185px" %)HSX1184.0～HSX1184.15|(% style="width:191px" %)HSX1192.0～HSX1192.15
1432 |(% style="width:102px" %)176～191|(% style="width:185px" %)HSX1185.0～HSX1185.15|(% style="width:191px" %)HSX1193.0～HSX1193.15
1433 |(% style="width:102px" %)192～207|(% style="width:185px" %)HSX1186.0～HSX1186.15|(% style="width:191px" %)HSX1194.0～HSX1194.15
1434 |(% style="width:102px" %)208～223|(% style="width:185px" %)HSX1187.0～HSX1187.15|(% style="width:191px" %)HSX1195.0～HSX1195.15
1435 |(% style="width:102px" %)224～239|(% style="width:185px" %)HSX1188.0～HSX1188.15|(% style="width:191px" %)HSX1196.0～HSX1196.15
1436 |(% style="width:102px" %)240～255|(% style="width:185px" %)HSX1189.0～HSX1189.15|(% style="width:191px" %)HSX1197.0～HSX1197.15
1437 |(% colspan="1" rowspan="16" style="width:135px" %)4|(% style="width:102px" %)0～15|(% style="width:185px" %)HSX598.0～HSX598.15|(% style="width:191px" %)HSX606.0～HSX606.15
1438 |(% style="width:102px" %)16～31|(% style="width:185px" %)HSX599.0～HSX599.15|(% style="width:191px" %)HSX607.0～HSX607.15
1439 |(% style="width:102px" %)32～47|(% style="width:185px" %)HSX600.0～HSX600.15|(% style="width:191px" %)HSX608.0～HSX608.15
1440 |(% style="width:102px" %)48～63|(% style="width:185px" %)HSX601.0～HSX601.15|(% style="width:191px" %)HSX609.0～HSX609.15
1441 |(% style="width:102px" %)64～79|(% style="width:185px" %)HSX602.0～HSX602.15|(% style="width:191px" %)HSX610.0～HSX610.15
1442 |(% style="width:102px" %)80～95|(% style="width:185px" %)HSX603.0～HSX603.15|(% style="width:191px" %)HSX611.0～HSX611.15
1443 |(% style="width:102px" %)96～111|(% style="width:185px" %)HSX604.0～HSX604.15|(% style="width:191px" %)HSX612.0～HSX612.15
1444 |(% style="width:102px" %)112～127|(% style="width:185px" %)HSX605.0～HSX605.15|(% style="width:191px" %)HSX613.0～HSX613.15
1445 |(% style="width:102px" %)128～143|(% style="width:185px" %)HSX1198.0～HSX1198.15|(% style="width:191px" %)HSX1206.0～HSX1206.15
1446 |(% style="width:102px" %)144～159|(% style="width:185px" %)HSX1199.0～HSX1199.15|(% style="width:191px" %)HSX1207.0～HSX1207.15
1447 |(% style="width:102px" %)160～175|(% style="width:185px" %)HSX1200.0～HSX1200.15|(% style="width:191px" %)HSX1208.0～HSX1208.15
1448 |(% style="width:102px" %)176～191|(% style="width:185px" %)HSX1201.0～HSX1201.15|(% style="width:191px" %)HSX1209.0～HSX1209.15
1449 |(% style="width:102px" %)192～207|(% style="width:185px" %)HSX1202.0～HSX1202.15|(% style="width:191px" %)HSX1210.0～HSX1210.15
1450 |(% style="width:102px" %)208～223|(% style="width:185px" %)HSX1203.0～HSX1203.15|(% style="width:191px" %)HSX1211.0～HSX1211.15
1451 |(% style="width:102px" %)224～239|(% style="width:185px" %)HSX1204.0～HSX1204.15|(% style="width:191px" %)HSX1212.0～HSX1212.15
1452 |(% style="width:102px" %)240～255|(% style="width:185px" %)HSX1205.0～HSX1205.15|(% style="width:191px" %)HSX1213.0～HSX1213.15
1453 |(% colspan="1" rowspan="16" style="width:135px" %)5|(% style="width:102px" %)0～15|(% style="width:185px" %)HSX614.0～HSX614.15|(% style="width:191px" %)HSX622.0～HSX622.15
1454 |(% style="width:102px" %)16～31|(% style="width:185px" %)HSX615.0～HSX615.15|(% style="width:191px" %)HSX623.0～HSX623.15
1455 |(% style="width:102px" %)32～47|(% style="width:185px" %)HSX616.0～HSX616.15|(% style="width:191px" %)HSX624.0～HSX624.15
1456 |(% style="width:102px" %)48～63|(% style="width:185px" %)HSX617.0～HSX617.15|(% style="width:191px" %)HSX625.0～HSX625.15
1457 |(% style="width:102px" %)64～79|(% style="width:185px" %)HSX618.0～HSX618.15|(% style="width:191px" %)HSX626.0～HSX626.15
1458 |(% style="width:102px" %)80～95|(% style="width:185px" %)HSX619.0～HSX619.15|(% style="width:191px" %)HSX627.0～HSX627.15
1459 |(% style="width:102px" %)96～111|(% style="width:185px" %)HSX620.0～HSX620.15|(% style="width:191px" %)HSX628.0～HSX628.15
1460 |(% style="width:102px" %)112～127|(% style="width:185px" %)HSX621.0～HSX621.15|(% style="width:191px" %)HSX629.0～HSX629.15
1461 |(% style="width:102px" %)128～143|(% style="width:185px" %)HSX1214.0～HSX1214.15|(% style="width:191px" %)HSX1222.0～HSX1222.15
1462 |(% style="width:102px" %)144～159|(% style="width:185px" %)HSX1215.0～HSX1215.15|(% style="width:191px" %)HSX1223.0～HSX1223.15
1463 |(% style="width:102px" %)160～175|(% style="width:185px" %)HSX1216.0～HSX1216.15|(% style="width:191px" %)HSX1224.0～HSX1224.15
1464 |(% style="width:102px" %)176～191|(% style="width:185px" %)HSX1217.0～HSX1217.15|(% style="width:191px" %)HSX1225.0～HSX1225.15
1465 |(% style="width:102px" %)192～207|(% style="width:185px" %)HSX1218.0～HSX1218.15|(% style="width:191px" %)HSX1226.0～HSX1226.15
1466 |(% style="width:102px" %)208～223|(% style="width:185px" %)HSX1219.0～HSX1219.15|(% style="width:191px" %)HSX1227.0～HSX1227.15
1467 |(% style="width:102px" %)224～239|(% style="width:185px" %)HSX1220.0～HSX1220.15|(% style="width:191px" %)HSX1228.0～HSX1228.15
1468 |(% style="width:102px" %)240～255|(% style="width:185px" %)HSX1221.0～HSX1221.15|(% style="width:191px" %)HSX1229.0～HSX1229.15
1469 |(% colspan="1" rowspan="16" style="width:135px" %)6|(% style="width:102px" %)0～15|(% style="width:185px" %)HSX630.0～HSX630.15|(% style="width:191px" %)HSX638.0～HSX638.15
1470 |(% style="width:102px" %)16～31|(% style="width:185px" %)HSX631.0～HSX631.15|(% style="width:191px" %)HSX639.0～HSX639.15
1471 |(% style="width:102px" %)32～47|(% style="width:185px" %)HSX632.0～HSX632.15|(% style="width:191px" %)HSX640.0～HSX640.15
1472 |(% style="width:102px" %)48～63|(% style="width:185px" %)HSX633.0～HSX633.15|(% style="width:191px" %)HSX641.0～HSX641.15
1473 |(% style="width:102px" %)64～79|(% style="width:185px" %)HSX634.0～HSX634.15|(% style="width:191px" %)HSX642.0～HSX642.15
1474 |(% style="width:102px" %)80～95|(% style="width:185px" %)HSX635.0～HSX635.15|(% style="width:191px" %)HSX643.0～HSX643.15
1475 |(% style="width:102px" %)96～111|(% style="width:185px" %)HSX636.0～HSX636.15|(% style="width:191px" %)HSX644.0～HSX644.15
1476 |(% style="width:102px" %)112～127|(% style="width:185px" %)HSX637.0～HSX637.15|(% style="width:191px" %)HSX645.0～HSX645.15
1477 |(% style="width:102px" %)128～143|(% style="width:185px" %)HSX1230.0～HSX1230.15|(% style="width:191px" %)HSX1238.0～HSX1238.15
1478 |(% style="width:102px" %)144～159|(% style="width:185px" %)HSX1231.0～HSX1231.15|(% style="width:191px" %)HSX1239.0～HSX1239.15
1479 |(% style="width:102px" %)160～175|(% style="width:185px" %)HSX1232.0～HSX1232.15|(% style="width:191px" %)HSX1240.0～HSX1240.15
1480 |(% style="width:102px" %)176～191|(% style="width:185px" %)HSX1233.0～HSX1233.15|(% style="width:191px" %)HSX1241.0～HSX1241.15
1481 |(% style="width:102px" %)192～207|(% style="width:185px" %)HSX1234.0～HSX1234.15|(% style="width:191px" %)HSX1242.0～HSX1242.15
1482 |(% style="width:102px" %)208～223|(% style="width:185px" %)HSX1235.0～HSX1235.15|(% style="width:191px" %)HSX1243.0～HSX1243.15
1483 |(% style="width:102px" %)224～239|(% style="width:185px" %)HSX1236.0～HSX1236.15|(% style="width:191px" %)HSX1244.0～HSX1244.15
1484 |(% style="width:102px" %)240～255|(% style="width:185px" %)HSX1237.0～HSX1237.15|(% style="width:191px" %)HSX1245.0～HSX1245.15
1485 |(% colspan="1" rowspan="16" style="width:135px" %)7|(% style="width:102px" %)0～15|(% style="width:185px" %)HSX646.0～HSX646.15|(% style="width:191px" %)HSX654.0～HSX654.15
1486 |(% style="width:102px" %)16～31|(% style="width:185px" %)HSX647.0～HSX647.15|(% style="width:191px" %)HSX655.0～HSX655.15
1487 |(% style="width:102px" %)32～47|(% style="width:185px" %)HSX648.0～HSX648.15|(% style="width:191px" %)HSX656.0～HSX656.15
1488 |(% style="width:102px" %)48～63|(% style="width:185px" %)HSX649.0～HSX649.15|(% style="width:191px" %)HSX657.0～HSX657.15
1489 |(% style="width:102px" %)64～79|(% style="width:185px" %)HSX650.0～HSX650.15|(% style="width:191px" %)HSX658.0～HSX658.15
1490 |(% style="width:102px" %)80～95|(% style="width:185px" %)HSX651.0～HSX651.15|(% style="width:191px" %)HSX659.0～HSX659.15
1491 |(% style="width:102px" %)96～111|(% style="width:185px" %)HSX652.0～HSX652.15|(% style="width:191px" %)HSX660.0～HSX660.15
1492 |(% style="width:102px" %)112～127|(% style="width:185px" %)HSX653.0～HSX653.15|(% style="width:191px" %)HSX661.0～HSX661.15
1493 |(% style="width:102px" %)128～143|(% style="width:185px" %)HSX1246.0～HSX1246.15|(% style="width:191px" %)HSX1254.0～HSX1254.15
1494 |(% style="width:102px" %)144～159|(% style="width:185px" %)HSX1247.0～HSX1247.15|(% style="width:191px" %)HSX1255.0～HSX1255.15
1495 |(% style="width:102px" %)160～175|(% style="width:185px" %)HSX1248.0～HSX1248.15|(% style="width:191px" %)HSX1256.0～HSX1256.15
1496 |(% style="width:102px" %)176～191|(% style="width:185px" %)HSX1249.0～HSX1249.15|(% style="width:191px" %)HSX1257.0～HSX1257.15
1497 |(% style="width:102px" %)192～207|(% style="width:185px" %)HSX1250.0～HSX1250.15|(% style="width:191px" %)HSX1258.0～HSX1258.15
1498 |(% style="width:102px" %)208～223|(% style="width:185px" %)HSX1251.0～HSX1251.15|(% style="width:191px" %)HSX1259.0～HSX1259.15
1499 |(% style="width:102px" %)224～239|(% style="width:185px" %)HSX1252.0～HSX1252.15|(% style="width:191px" %)HSX1260.0～HSX1260.15
1500 |(% style="width:102px" %)240～255|(% style="width:185px" %)HSX1253.0～HSX1253.15|(% style="width:191px" %)HSX1261.0～HSX1261.15
1501 |(% colspan="1" rowspan="16" style="width:135px" %)8|(% style="width:102px" %)0～15|(% style="width:185px" %)HSX662.0～HSX662.15|(% style="width:191px" %)HSX670.0～HSX670.15
1502 |(% style="width:102px" %)16～31|(% style="width:185px" %)HSX663.0～HSX663.15|(% style="width:191px" %)HSX671.0～HSX671.15
1503 |(% style="width:102px" %)32～47|(% style="width:185px" %)HSX664.0～HSX664.15|(% style="width:191px" %)HSX672.0～HSX672.15
1504 |(% style="width:102px" %)48～63|(% style="width:185px" %)HSX665.0～HSX665.15|(% style="width:191px" %)HSX673.0～HSX673.15
1505 |(% style="width:102px" %)64～79|(% style="width:185px" %)HSX666.0～HSX666.15|(% style="width:191px" %)HSX674.0～HSX674.15
1506 |(% style="width:102px" %)80～95|(% style="width:185px" %)HSX667.0～HSX667.15|(% style="width:191px" %)HSX675.0～HSX675.15
1507 |(% style="width:102px" %)96～111|(% style="width:185px" %)HSX668.0～HSX668.15|(% style="width:191px" %)HSX676.0～HSX676.15
1508 |(% style="width:102px" %)112～127|(% style="width:185px" %)HSX669.0～HSX669.15|(% style="width:191px" %)HSX677.0～HSX677.15
1509 |(% style="width:102px" %)128～143|(% style="width:185px" %)HSX1262.0～HSX1262.15|(% style="width:191px" %)HSX1270.0～HSX1270.15
1510 |(% style="width:102px" %)144～159|(% style="width:185px" %)HSX1263.0～HSX1263.15|(% style="width:191px" %)HSX1271.0～HSX1271.15
1511 |(% style="width:102px" %)160～175|(% style="width:185px" %)HSX1264.0～HSX1264.15|(% style="width:191px" %)HSX1272.0～HSX1272.15
1512 |(% style="width:102px" %)176～191|(% style="width:185px" %)HSX1265.0～HSX1265.15|(% style="width:191px" %)HSX1273.0～HSX1273.15
1513 |(% style="width:102px" %)192～207|(% style="width:185px" %)HSX1266.0～HSX1266.15|(% style="width:191px" %)HSX1274.0～HSX1274.15
1514 |(% style="width:102px" %)208～223|(% style="width:185px" %)HSX1267.0～HSX1267.15|(% style="width:191px" %)HSX1275.0～HSX1275.15
1515 |(% style="width:102px" %)224～239|(% style="width:185px" %)HSX1268.0～HSX1268.15|(% style="width:191px" %)HSX1276.0～HSX1276.15
1516 |(% style="width:102px" %)240～255|(% style="width:185px" %)HSX1269.0～HSX1269.15|(% style="width:191px" %)HSX1277.0～HSX1277.15
1517 |(% rowspan="4" style="width:135px" %)9|(% style="width:102px" %)0~~15|(% style="width:185px" %)HSX678.0~~678.15|(% style="width:191px" %)HSX686.0~~686.15
1518 |(% style="width:102px" %)16~~31|(% style="width:185px" %)HSX679.0~~679.15|(% style="width:191px" %)HSX687.0~~687.15
1519 |(% style="width:102px" %)32~~47|(% style="width:185px" %)HSX680.0~~680.15|(% style="width:191px" %)HSX688.0~~688.15
1520 |(% style="width:102px" %)48~~63|(% style="width:185px" %)HSX681.0~~681.15|(% style="width:191px" %)HSX689.0~~689.15
1521 |(% rowspan="4" style="width:135px" %)10|(% style="width:102px" %)0~~15|(% style="width:185px" %)HSX694.0~~694.15|(% style="width:191px" %)HSX702.0~~702.15
1522 |(% style="width:102px" %)16~~31|(% style="width:185px" %)HSX695.0~~695.15|(% style="width:191px" %)HSX703.0~~703.15
1523 |(% style="width:102px" %)32~~47|(% style="width:185px" %)HSX696.0~~696.15|(% style="width:191px" %)HSX704.0~~704.15
1524 |(% style="width:102px" %)48~~63|(% style="width:185px" %)HSX697.0~~697.15|(% style="width:191px" %)HSX705.0~~705.15
1525 |(% rowspan="4" style="width:135px" %)11|(% style="width:102px" %)0~~15|(% style="width:185px" %)HSX710.0~~710.15|(% style="width:191px" %)HSX718.0~~718.15
1526 |(% style="width:102px" %)16~~31|(% style="width:185px" %)HSX711.0~~711.15|(% style="width:191px" %)HSX719.0~~719.15
1527 |(% style="width:102px" %)32~~47|(% style="width:185px" %)HSX712.0~~712.15|(% style="width:191px" %)HSX720.0~~720.15
1528 |(% style="width:102px" %)48~~63|(% style="width:185px" %)HSX713.0~~713.15|(% style="width:191px" %)HSX721.0~~721.15
1529 |(% rowspan="4" style="width:135px" %)12|(% style="width:102px" %)0~~15|(% style="width:185px" %)HSX726.0~~726.15|(% style="width:191px" %)HSX734.0~~734.15
1530 |(% style="width:102px" %)16~~31|(% style="width:185px" %)HSX727.0~~727.15|(% style="width:191px" %)HSX735.0~~735.15
1531 |(% style="width:102px" %)32~~47|(% style="width:185px" %)HSX728.0~~728.15|(% style="width:191px" %)HSX736.0~~736.15
1532 |(% style="width:102px" %)48~~63|(% style="width:185px" %)HSX729.0~~729.15|(% style="width:191px" %)HSX737.0~~737.15
1533 |(% rowspan="4" style="width:135px" %)13|(% style="width:102px" %)0~~15|(% style="width:185px" %)HSX742.0~~742.15|(% style="width:191px" %)HSX750.0~~750.15
1534 |(% style="width:102px" %)16~~31|(% style="width:185px" %)HSX743.0~~743.15|(% style="width:191px" %)HSX751.0~~751.15
1535 |(% style="width:102px" %)32~~47|(% style="width:185px" %)HSX744.0~~744.15|(% style="width:191px" %)HSX752.0~~752.15
1536 |(% style="width:102px" %)48~~63|(% style="width:185px" %)HSX745.0~~745.15|(% style="width:191px" %)HSX753.0~~753.15
1537 |(% rowspan="4" style="width:135px" %)14|(% style="width:102px" %)0~~15|(% style="width:185px" %)HSX758.0~~758.15|(% style="width:191px" %)HSX766.0~~766.15
1538 |(% style="width:102px" %)16~~31|(% style="width:185px" %)HSX759.0~~759.15|(% style="width:191px" %)HSX767.0~~767.15
1539 |(% style="width:102px" %)32~~47|(% style="width:185px" %)HSX760.0~~760.15|(% style="width:191px" %)HSX768.0~~768.15
1540 |(% style="width:102px" %)48~~63|(% style="width:185px" %)HSX761.0~~761.15|(% style="width:191px" %)HSX769.0~~769.15
1541 |(% rowspan="4" style="width:135px" %)15|(% style="width:102px" %)0~~15|(% style="width:185px" %)HSX774.0~~774.15|(% style="width:191px" %)HSX782.0~~782.15
1542 |(% style="width:102px" %)16~~31|(% style="width:185px" %)HSX775.0~~775.15|(% style="width:191px" %)HSX783.0~~783.15
1543 |(% style="width:102px" %)32~~47|(% style="width:185px" %)HSX776.0~~776.15|(% style="width:191px" %)HSX784.0~~784.15
1544 |(% style="width:102px" %)48~~63|(% style="width:185px" %)HSX777.0~~777.15|(% style="width:191px" %)HSX785.0~~785.15
1545 |(% rowspan="4" style="width:135px" %)16|(% style="width:102px" %)0~~15|(% style="width:185px" %)HSX790.0~~790.15|(% style="width:191px" %)HSX798.0~~798.15
1546 |(% style="width:102px" %)16~~31|(% style="width:185px" %)HSX791.0~~791.15|(% style="width:191px" %)HSX799.0~~799.15
1547 |(% style="width:102px" %)32~~47|(% style="width:185px" %)HSX792.0~~792.15|(% style="width:191px" %)HSX800.0~~800.15
1548 |(% style="width:102px" %)48~~63|(% style="width:185px" %)HSX793.0~~793.15|(% style="width:191px" %)HSX801.0~~801.15