Skip to Content

Wiki source code of 12 HMI internal registers

Version 22.1 by Hunter on 2023/02/18 14:26
Show last authors
1 = **Introduction** =
2
3 HMI provide four types of HMI address for user. You can use them as temporary variables of the program. The use is consistent with the way access to the PLC register. You could also reference through the address, PIStudio provides three types of such memory.
4
5 *HSW, HDW, HUW, HAW are word address, HSX, HDX, HUX, HAX are bit address.
6
7 * **System data area (HSW): **A special register defined by the system.
8 * **Data storage area (HDW/HDX): **Users store user data.
9 * **System data area (HUW): **A special register defined by the system.
10 * **System Data (HAW)**: System register used for power-off save.
11 * **Recipe index area (RPW): **System register used for recipe index.
12
13 HMI internal registers are divided into bit address and word address, which can be accessed in two ways (take HDW as an example).
14
15 * Access as word with the prefix "HDW".
16 ** HDW0 means the 1st word of system data area. HDW1 means the 2nd word of system data area.
17 * Access as bit with the prefix "HDX".  The number before "." i".  The number before Access in bit with the prefix "HD".  The number before Access in bit with the prefix "HDX". The number before "." indicates the number of the word. The number after "." indicates the bit number of the word.
18 ** HDX1020.12 means to access the system data area in bit mode, the specific location is the 13th bit of the 1020 word.
19
20 (% class="box infomessage" %)
21 (((
22 **✎Note:**
23
24 * Addresses in HDX are the bits from words in HDW, so be careful when using addresses. For example, HDX1020.12 is the 13th bit to access the 1020 word. The value of this bit is the same as that of the word accessed through HDW001020. The 13th bit of this word is actually the same bit as HDX1020.12.
25 * The address of the bit address HDX is with a decimal point while word addresses are integers.
26 )))
27
28 = Address ranges table =
29
30 (% cellpadding="10" %)
31 |=(% scope="row" style="width: 218px;" %)Address Type\HMI Series|=(% style="width: 228px;" %)General Series|=(% style="width: 200px;" %)i Series/HMI+ models|=(% style="width: 136px;" %)ie Series|=(% style="width: 232px;" %)ig Series
32 |=(% style="width: 218px;" %)HDW|(% style="width:228px" %)HDW0-HDW299999|HDW0-HDW299999|HDW0-HDW299999|HDW0-HDW299999
33 |=(% style="width: 218px;" %)HSW|(% style="width:228px" %)HSW0-HSW14999|HSW0-HSW14999|HSW0-HSW14999|HSW0-HSW14999
34 |=(% style="width: 218px;" %)HAW|(% style="width:228px" %)HAW0-HAW199999|HAW0-HAW199999|HAW0-HAW199999|HAW0-HAW199999
35 |=(% style="width: 218px;" %)HUW|(% style="width:228px" %)HUW0-HUW1599|HUW0-HUW1599|HUW0-HUW1599|HUW0-HUW1599
36 |=(% style="width: 218px;" %)HDX|(% style="width:228px" %)HDX0.0-HDX299999.15|HDX0.0-HDX299999.15|HDX0.0-HDX299999.15|HDX0.0-HDX299999.15
37 |=(% style="width: 218px;" %)HSX|(% style="width:228px" %)HSX0.0-HSX14999.15|HSX0.0-HSX14999.15|HSX0-HSX14999.15|HSX0.0-HSX14999.15
38 |=(% style="width: 218px;" %)HAX|(% style="width:228px" %)HAX0.0-HAX199999.15|HAX0.0-HAX199999.15|HAX0.0-HAX199999.15|HAX0.0-HAX199999.15
39 |=(% style="width: 218px;" %)HUX|(% style="width:228px" %)HUX0.0-HUX1599.15|HUX0.0-HUX1599.15|HUX0.0-HUX1599.15|HUX0.0-HUX1599.15
40 |=(% style="width: 218px;" %)RPW|(% style="width:228px" %) |RPW000000-RPW990450|RPW000000-RPW990450|RPW000000-RPW990450
41
42 = **Data storage area (HDW/HDX)** =
43
44 It is used to save the temporary data of project.
45
46 1. Access as word, and serial number range is from HDW0 to HDW299999.
47 1. Access as bit, and serial number range is from HDX0.0 to HDX299999.15.
48
49 = **Power-down save area (HAW/HAX)** =
50
51 It is system registers used for power-off save.
52
53 1. Access as word, and serial number range is from HAW0 to HAW199999.
54 1. Access as bit, and serial number range is from HAX0.0 to HAX199999.15.
55
56 (% class="box infomessage" %)
57 (((
58 **✎Note:**
59
60 * HAW/HAX is power-down retention. The register of this type is able to save the data before the power-down.
61 * To avoid possible device failure, do not immediately power off and reboot when configuring the power-down save addre
62 )))
63
64 = **Recipe index area (RPW)** =
65
66 It is system recipe data power-off save register. The range is from RPW000000 to RPW990450.
67
68 **✎Note:**
69
70 * RPW is power-down retention. The register of this type is able to save the data before the power-down.
71 * To avoid possible device failure, do not immediately power off and reboot when configuring the power-down save addre
72
73 = **Single user data area (HUW/HUX)** =
74
75 It is used for system special registers (reserved by system).
76
77 1. Access as word, and serial number range is from HUW0 to HUW199999.
78 1. Access as bit, and serial number range is from HUX0.0 to HUX199999.15.
79
80 **✎Note:**
81
82 * HUW/HUX is a system special register, so please check the system special register list during use. Please use the address specified in the table and do not use the address which is not mentioned in the table.
83
84 (% class="table-bordered" %)
85 |=**Special register address**|=**Description**|=**Function**
86 |=HUW0|Screen switch|A single terminal controls the screen switching, and all terminals do not affect each other.
87 |=HUW110~~HUW119|(% rowspan="26" %)Addresses of the built-in keyboard|The T9 input method stores the selected seria number length
88 |=HUW120~~HUW129|The T9 input method stores the selected Chinese Pinyin length
89 |=HUW135|Input method: first input
90 |=HUW136|Button: T9 Chinese Pinyin page
91 |=HUW137|Button: T9 Chinese characters page
92 |=HUW138|Button: symbol
93 |=HUW139|Button: switch
94 |=HUW140|Button: Chinese characters 1
95 |=HUW142|Button: Chinese characters 2
96 |=HUW144|Button: Chinese characters 3
97 |=HUW146|Button: Chinese characters 4
98 |=HUW148|Button: Chinese characters 5
99 |=HUW150|Button: Chinese characters 6
100 |=HUW152|Button: Chinese characters 7
101 |=HUW154|Button: Chinese characters 8
102 |=HUW156|Button: Chinese characters 9
103 |=HUW158|Button: Chinese characters 10
104 |=HUW160~~HUW169|Button: Chinese Pinyin 1
105 |=HUW170~~HUW179|Button: Chinese Pinyin 2
106 |=HUW180~~HUW189|Button: Chinese Pinyin 3
107 |=HUW190~~HUW199|Button: Chinese Pinyin 4
108 |=HUW200~~HUW699|Input method cache length
109 |=HUW700~~HUW749|Minimum value of the input method
110 |=HUW750~~HUW799|Maximum value of the input method
111 |=HUW800|Case switching of the input method
112 |=HUW801~~HUW900|Input method format cache length
113 |=HUW1000|(% rowspan="12" %)Addresses of user permission|OK (Sign in)
114 |=HUW1001|Result of operation
115 |=HUW1002~~1005|Old password
116 |=HUW1006~~1009|New password
117 |=HUW1010~~1013|Confirm password
118 |=HUW1014~~1029|New user name
119 |=HUW1030~~1157|States information of user permission
120 |=HUW1158~~1335|User name (Only or drop-down list object)
121 |=HUW1336~~1345|User name description or note
122 |=HUW1347|Hidden function configurations
123 |=HUW1348|Permission settings
124 |=HUW1349|Current user name
125 |=HUW1382|User sign in way|(((
126 * 0: Select the user name from drop-down list object for signing in
127 * 1: Enter the user name in Character Input/Display object for signing in (HUW1014)
128 )))
129 |=HUW1400|Time interval from last operation|(((
130 Shows how long the touch screen has not been clicked, in seconds. 32-bit unsigned integer
131
132 **✎Note:** Clicking by different users will only clear the corresponding register of the currently operating terminal, and the registers on other terminals (such as mobile phones, computers) will not be cleared.
133 )))
134 |=HUW1402|Keyboard note|It saves the text information of the keyboard notes when clicking object(HUW1402-HUW1433)
135 |=HUW1436|Current object level|Indicate current object security level
136
137 = **Special data area (HSW/HSX)** =
138
139 It is used for system special registers (reserved by system).
140
141 1. Access as word, and serial number range is from HSW0 to HSW49999. (HSW10000 to HSW19999 are the power-off storage areas)
142 1. Access as bit, and serial number range is from HSX0.0 to HSX49999.15.
143
144 **✎Note:**
145
146 * HSW / HSX are a system special register, so please check the system special register list during use. Please use the address specified in the table and do not use the address which is not mentioned in the table.
147 * To avoid possible device failure, do not immediately power off and reboot when configuring the power-down save address.
148
149 (% class="table-bordered" style="width:1024px" %)
150 |=(% scope="row" style="width: 160px;" %)**Address**|=(% style="width: 282px;" %)**Function**|=(% style="width: 452px;" %)**Description**
151 |=(% style="width: 160px;" %)HSW0|(% style="width:282px" %)Language switch|(% style="width:452px" %)Multiple language could be set in the project, HMI support maximum 8 languages. (Power-down save supported)
152 |=(% style="width: 160px;" %)HSW1|(% style="width:282px" %)Beep frequency|(% style="width:452px" %)Frequency range: 0~~4000
153 |=(% style="width: 160px;" %)HSW2|(% style="width:282px" %)Beep volume|(% style="width:452px" %)Volume range: 0~~80
154 |=(% style="width: 160px;" %)HSW3|(% style="width:282px" %)Beep time|(% style="width:452px" %)Unit: ms
155 |=(% style="width: 160px;" %)HSW4|(% style="width:282px" %)Beep whether enable or not|(% style="width:452px" %)(((
156 * =0: Enable.
157 * =1: Disable.
158 )))
159 |=(% style="width: 160px;" %)HSW5|(% style="width:282px" %)(((
160 Alarm indicator
161 )))|(% style="width:452px" %)(((
162 * =0: Currently no alarm or all alarms have been off.
163 * =1: Currently alarm(s) still keep in on.
164 )))
165 |=(% style="width: 160px;" %)HSW6~~HSW7|(% style="width:282px" %)Number of alarms|(% style="width:452px" %)The number of alarm (it also includes the records of alarm confirmed)
166 |=(% style="width: 160px;" %)HSW8|(% style="width:282px" %)Number of unconfirmed history alarm|(% style="width:452px" %)The number of unconfirmed history alarm
167 |=(% style="width: 160px;" %)HSW9|(% style="width:282px" %)Time out tip|(% style="width:452px" %)(((
168 * =0: Enable
169 * =1: Disable
170 )))
171 |=(% style="width: 160px;" %)HSW12|(% style="width:282px" %)Screen swicth|(% style="width:452px" %)(((
172 * = 0: Only HSW control the screen switch, and the sreens of all users will switch.
173 * = 1: Only HUW control the screen switch, and all users do not affect each other.
174 )))
175 |=(% style="width: 160px;" %)HSW13|(% style="width:282px" %)Screen switch register|(% style="width:452px" %)Equal to different values, the screen jumps to the corresponding screen number of the screen.
176 |=(% style="width: 160px;" %)HSW24|(% style="width:282px" %)Reboot HMI|=(% style="width: 452px;" %)1: Reboot
177 |=(% style="width: 160px;" %)HSW28|(% style="width:282px" %)Local time: year|(% style="width:452px" %)Range: 0~~9999 (system reserved)
178 |=(% style="width: 160px;" %)HSW29|(% style="width:282px" %)Local time: month|(% style="width:452px" %)Range: 01~~12 (system reserved)
179 |=(% style="width: 160px;" %)HSW30|(% style="width:282px" %)Local time: day|(% style="width:452px" %)Range: 01~~31 (system reserved)
180 |=(% style="width: 160px;" %)HSW31|(% style="width:282px" %)Local time: hour|(% style="width:452px" %)Range: 0~~23 (system reserved)
181 |=(% style="width: 160px;" %)HSW32|(% style="width:282px" %)Local time: minute|(% style="width:452px" %)Range: 0~~59 (system reserved)
182 |=(% style="width: 160px;" %)HSW33|(% style="width:282px" %)Local time: second|(% style="width:452px" %)Range: 0~~59 (system reserved)
183 |=(% style="width: 160px;" %)HSW34|(% style="width:282px" %)Local time: week|(% style="width:452px" %)(((
184 * =0: Sunday.
185 * =1: Monday.
186 * =2: Tuesday.
187 * =3: Wednesday.
188 * =4: Thursday.
189 * =5: Friday.
190 * =6: Saturday.
191 )))
192 |=(% style="width: 160px;" %)HSW134|(% style="width:282px" %)(((
193 Whether the Script is read through
194
195
196 )))|(% style="width:452px" %)(((
197 **✎Note:** If want to read-only or write-only, please enable this settings.
198
199 * =0: Read from HMI cache(Default)
200 * =1: Read from PLC directly
201 )))
202 |=(% style="width: 160px;" %)HSW135|(% style="width:282px" %)Confirm installment password|(% style="width:452px" %)Confirm button for installment password
203 |=(% style="width: 160px;" %)HSW151|(% style="width:282px" %)Installment due|(% style="width:452px" %)Number of days to installment due
204 |=(% style="width: 160px;" %)HSW185~~200|(% style="width:282px" %)Installment password|(% style="width:452px" %)Enter installment password
205 |=(% style="width: 160px;" %)HSW242|(% style="width:282px" %)(((
206 Prompt result of recipe operation
207
208 * Upload: Data is written from address to file
209 * Download: Data is written from a file to an address
210 )))|(% style="width:452px" %)(((
211 * =1: Download recipe, start
212 * =2: Download recipe, execution error
213 * =3: Download recipe, files don't exist
214 * =4: Download recipe, members don't exist
215 * =5: Download recipe, groups don't exist
216 * =6: Download recipe, success
217 * =7: Upload recipe, start
218 * =8: Upload recipe, execution error
219 * =9: Upload recipe, files don't exist
220 * =10: Upload recipe, members don't exist
221 * =11: Upload recipe, groups don't exist
222 * =12: Upload recipe, success
223 * =13: Insert recipe, start
224 * =14: Insert recipe, execution error
225 * =15: Insert recipe, files don't exist
226 * =16: Insert recipe, members don't exist
227 * =17: Insert recipe, groups don't exist
228 * =18: Insert recipe, success
229 * =19: Delete recipe, start
230 * =20: Delete recipe, execution error
231 * =21: Delete recipe, files don't exist
232 * =22: Delete recipe, members don't exist
233 * =23: Delete recipe, groups don't exist
234 * =24: Delete recipe, success
235 * =25: Delete and sort recipe, start
236 * =26: Delete recipe and sort, execution error
237 * =27: Delete recipe and sort, files don't exist
238 * =28: Delete recipe and sort, members don't exist
239 * =29: Delete recipe and sort, groups don't exist
240 * =30: Delete recipe and sort, success
241 * =37: CSV recipe files import successfully
242 * =38: CSV recipe files import failed.
243 )))
244 |=(% style="width: 160px;" %)HSW243|(% style="width:282px" %)Prompt result of recipe index|(% style="width:452px" %)(((
245 * =31: Recipe index, start
246 * =32: Recipe index, execution error
247 * =33: Recipe index, files don't exist
248 * =34: Recipe index, members don't exist
249 * =35: Recipe index, groups don't exist
250 * =36: Recipe index, success
251 )))
252 |=(% style="width: 160px;" %)HSW521|(% style="width:282px" %)Delete graph and alarm record|(% style="width:452px" %)(((
253 * =0: No operation
254 * =1: HSX521.0=1, delete all records.
255 * =2: HSX521.1=1, delete all trend graph.
256 * =4: HSX521.2=1, delete all alarms.
257 * =16: HSX521.4=1, delete history XY plot.
258 * =32: HSX521.5=1, delete data records in SD card or USB flash disk;(Please make a setting which is saved to USB flash disk or SD card in project setting).
259 * =64: HSX521.6=1, delete alarms records in SD card or USB flash disk; (Please make a setting which is saved to USB flash disk or SD card in project setting).
260 )))
261 |=(% style="width: 160px;" %)HSW522|(% style="width:282px" %)Copy and paste the alarm/data files in flash to the USB flash disk|(% style="width:452px" %)(((
262 * =0: No operation
263 * =1: HSX522.0=1, copy all record
264 * =2: HSX522.2=1, copy history XY trend graph
265 * =8: HSX522.3=1, copy alarm record
266 * =32: HSX522.5=1, copy recipe
267 )))
268 |=(% style="width: 160px;" %)HSW523|(% style="width:282px" %)Copy and paste the alarm/data files in flash to the SD card|(% style="width:452px" %)(((
269 * =0: No operation
270 * =1: HSX523.0=1, copy all record
271 * =4: HSX523.2=1, copy history XY trend graph
272 * =8: HSX523.3=1, copy alarm record
273 )))
274 |=(% style="width: 160px;" %)HSW524|(% style="width:282px" %)Copy and paste the alarm/data files in SD card to the USB flash disk|(% style="width:452px" %)(((
275 * =0: no operation
276 * =4: HSX524.2=1, copy history XY trend graph
277 * =8: HSX524.3=1, copy alarm record
278 * =16: HSX524.4=1, copy history alarm record
279 * =32: HSX524.5=1, copy data record
280 )))
281 |=(% style="width: 160px;" %)HSW525|(% style="width:282px" %)Copy and paste the alarm/data files in USB flash disk to SD card|(% style="width:452px" %)(((
282 * =0: no operation
283 * =4: HSX525.2=1, copy history XY trend graph
284 * =8: HSX525.3=1, copy alarm record
285 * =16: HSX525.4=1, copy history alarm record
286 * =32: HSX525.5= 1, copy data record
287 )))
288 |=(% style="width: 160px;" %)HSW526|(% style="width:282px" %)Delete file list|(% style="width:452px" %)(((
289 * =0: no operation
290 * =1: HSX526.0=1, delete designated file
291 * =2: HSX526.1=1, delete all files
292 )))
293 |=(% style="width: 160px;" %)HSW527|(% style="width:282px" %)Eject USB flash disk/SD card|(% style="width:452px" %)(((
294 * =0: No operation
295 * =1: Eject USB flash disk
296 * =2: Eject SD card
297 )))
298 |=(% style="width: 160px;" %)HSW528|(% style="width:282px" %)The state of USB flash disk|(% style="width:452px" %)(((
299 * =1: USB flash disk is detected
300 * =2: Ejecting USB flash disk, please waiting…
301 * =3: USB flash disk ejected
302 )))
303 |=(% style="width: 160px;" %)HSW529|(% style="width:282px" %)The state of SD card|(% style="width:452px" %)(((
304 * =1: SD card is detected
305 * =2: Ejecting SD card, please waiting…
306 * =3: SD card ejected
307 )))
308 |=(% style="width: 160px;" %)HSW550~~849|(% style="width:282px" %)Communication control|(% style="width:452px" %)For communication control and communication lamp (please refer to "[[communication control>>http://13.229.109.52:8080/wiki/pistudio/view/Helps/13.HMI%20internal%20registers/#HCommunicationcontrol]]" sector for detailed)
309 |=(% style="width: 160px;" %)HSW850|(% style="width:282px" %)(((
310 Network state
311
312 (4G, WIFI and Ethernet)
313 )))|(% style="width:452px" %)(((
314 In HMI V1.0
315
316 * =0: Network is disconnected.
317 * =1: only LAN connected, and APP can't access HMI.
318 * =2: WECON Cloud connected , APP and web could access HMI.
319
320 In HMI V2.0
321
322 * =0: Network is disconnected.
323 * =1: Network is connected.
324 )))
325 |=(% style="width: 160px;" %)HSW855|(% style="width:282px" %)Backlight Control|(% style="width:452px" %)(((
326 * HSX855.0=1: turn on the backlight and reset automatically after being triggered.
327 * HSX855.1=1: turn off the backlight and reset automatically after being triggered.
328 )))
329 |=(% style="width: 160px;" %)HSW856|(% style="width:282px" %)Whether to close the indirect screen when the current screen is switched to the other screen)|(% style="width:452px" %)(((
330 * =0: close the sub-screen, including the indirect screen;
331 * =1: not to close.
332 )))
333 |=(% style="width: 160px;" %)HSW857|(% style="width:282px" %)Permission in remote access (web page, mobile APP, cloud platform, etc.)|(% style="width:452px" %)(((
334 * =0: users could switch the screen, control the switch and update data in remote access.
335 * =1: users could only control function switch (only switch the screen), view data and switch state, but could not operate or update them.
336 * =2: users could neither operate the screen switch, nor switch operation and data modification, only view. (The ig series and 8000/9000 series with -R after system upgrade)
337 )))
338 |=(% style="width: 160px;" %)HSW860~~861|(% style="width:282px" %)Data partition remaining space|(% style="width:452px" %)Display the data partition remaining space, updated every minute, unit(**kB**)
339 |=(% style="width: 160px;" %)HSW880|(% style="width:282px" %)Enable data partition remaining space|(% style="width:452px" %)(((
340 ~=1, able to view the data partition remaining space from HSW860~~861.
341
342 ~=Other value except 1, disable the viewing function.
343 )))
344 |=(% style="width: 160px;" %)HSW881|(% style="width:282px" %)Storage of Record files|(% style="width:452px" %)(((
345 It is used for controlling saving alarm/data record files to U disk / SD card.
346
347 * = 0: Save to storage.
348 * = 1: Don't save to storage.
349 )))
350 |=(% style="width: 160px;" %)HSW882|(% style="width:282px" %)Storage device status|(% style="width:452px" %)(((
351 * HDX882.0=0 USB flash doesn't execute storage or storage finished.
352 * HDX882.0=1 USB flash is reading data, don't remove USB flash.
353 * HDX882.1=0 SD card doesn't execute storage or storage finished.
354 * HDX882.1=1 SD card is reading data, don't remove SD card.
355 )))
356 |=(% style="width: 160px;" %)HSW884|(% style="width:282px" %)Enter the system network configuration interface|(% style="width:452px" %)(((
357 * =0: Do not enter the network configuration interface
358 * =1: Enter the system network configuration interface.
359 ** ig series HMI only supports to enter the system interface
360
361 )))
362 |=(% style="width: 160px;" %)HSW885|(% style="width:282px" %)When the control object hides the address is read failed (communication failure), set the display mode of the object|(% style="width:452px" %)(((
363 * = 0: displayed by object setting.
364 * =1: control address read failure, the address control of all objects is hidden, not displayed.
365 * =2: control address read failure, the address control of all objects is displayed, not hidden.
366 )))
367 |=(% style="width: 160px;" %)HSW893|(% style="width:282px" %)(((
368 User Permission Control Address, same as HUW1000 feature, please refer to chapter "[[User Permission>>http://13.229.109.52:8080/wiki/pistudio/view/Helps/08.Basic%20Function/#HUserPermission]]"
369
370 **✎Note: **This address can only take effect when it is operated in the real HMI, and the operation is invalid on Web/App side.
371 )))|(% style="width:452px" %)(((
372 * =1: User Log in
373 * =2: Change User password
374 * =3: User Log out
375 * =4: New user
376 * =5: Delete user
377 * =6: Add user rights
378 * =8: Add Hide features
379 * =9: Delete Profile
380 * =10: Export Profile
381 * =11: Import profile
382 * =12: Export log file
383 * =13: Delete log file
384 )))
385 |=(% style="width: 160px;" %)HSW900|(% style="width:282px" %)Quick update frequency settings for objects|(% style="width:452px" %)(((
386 Valid when the object is enabled for "quick update". Default: 5.
387
388 Range: 1 (fastest) ~~ 50 (slowest)
389 )))
390 |=(% style="width: 160px;" %)HSW920|(% style="width:282px" %)Static mode Maximum periods|(% style="width:452px" %)Numeric Input/ Display (range: 0-12)
391 |=(% style="width: 160px;" %)HSW921 ~~ 924|(% style="width:282px" %)Static mode Admin key|(% style="width:452px" %)Character Input/ Display (length: 8)
392 |=(% style="width: 160px;" %)HSW925 ~~ 928|(% style="width:282px" %)1^^st^^ period key (Static mode)|(% style="width:452px" %)Character Input/ Display (length: 8)
393 |=(% style="width: 160px;" %)HSW929 ~~ 933|(% style="width:282px" %)1^^st^^ expiry time (Static mode)|(% style="width:452px" %)Numeric Input/ Display (YYYYMMDDHHMM)
394 |=(% style="width: 160px;" %)HSW935 ~~ 938|(% style="width:282px" %)2^^nd^^ period key (Static mode)|(% style="width:452px" %)Character Input/ Display (length: 8)
395 |=(% style="width: 160px;" %)HSW939 ~~ 943|(% style="width:282px" %)2^^nd ^^expiry time (Static mode)|(% style="width:452px" %)Numeric Input/ Display (YYYYMMDDHHMM)
396 |=(% style="width: 160px;" %)HSW945 ~~ 948|(% style="width:282px" %)3^^rd^^ period key (Static mode)|(% style="width:452px" %)Character Input/ Display (length: 8)
397 |=(% style="width: 160px;" %)HSW949 ~~ 953|(% style="width:282px" %)3^^rd ^^expiry time (Static mode)|(% style="width:452px" %)Numeric Input/ Display (YYYYMMDDHHMM)
398 |=(% style="width: 160px;" %)HSW955 ~~ 958|(% style="width:282px" %)4^^th^^ period key (Static mode)|(% style="width:452px" %)Character Input/ Display (length: 8)
399 |=(% style="width: 160px;" %)HSW959 ~~ 963|(% style="width:282px" %)4^^th ^^expiry time (Static mode)|(% style="width:452px" %)Numeric Input/ Display (YYYYMMDDHHMM)
400 |=(% style="width: 160px;" %)HSW965 ~~ 968|(% style="width:282px" %)5^^th^^ period key (Static mode)|(% style="width:452px" %)Character Input/ Display (length: 8)
401 |=(% style="width: 160px;" %)HSW969 ~~ 973|(% style="width:282px" %)5^^th ^^expiry time (Static mode)|(% style="width:452px" %)Numeric Input/ Display (YYYYMMDDHHMM)
402 |=(% style="width: 160px;" %)HSW975 ~~ 978|(% style="width:282px" %)6^^th^^ period key (Static mode)|(% style="width:452px" %)Character Input/ Display (length: 8)
403 |=(% style="width: 160px;" %)HSW979 ~~ 983|(% style="width:282px" %)6^^th ^^expiry time (Static mode)|(% style="width:452px" %)Numeric Input/ Display (YYYYMMDDHHMM)
404 |=(% style="width: 160px;" %)HSW985 ~~ 988|(% style="width:282px" %)7^^th^^ period key (Static mode)|(% style="width:452px" %)Character Input/ Display (length: 8)
405 |=(% style="width: 160px;" %)HSW989 ~~ 993|(% style="width:282px" %)7^^th ^^expiry time (Static mode)|(% style="width:452px" %)Numeric Input/ Display (YYYYMMDDHHMM)
406 |=(% style="width: 160px;" %)HSW995 ~~ 998|(% style="width:282px" %)8^^th^^ period key (Static mode)|(% style="width:452px" %)Character Input/ Display (length: 8)
407 |=(% style="width: 160px;" %)HSW999 ~~ 1003|(% style="width:282px" %)8^^th ^^expiry time (Static mode)|(% style="width:452px" %)Numeric Input/ Display (YYYYMMDDHHMM)
408 |=(% style="width: 160px;" %)HSW1005 ~~1008|(% style="width:282px" %)9^^th^^ period key (Static mode)|(% style="width:452px" %)Character Input/ Display (length: 8)
409 |=(% style="width: 160px;" %)HSW1009 ~~ 1013|(% style="width:282px" %)9^^th ^^expiry time (Static mode)|(% style="width:452px" %)Numeric Input/ Display (YYYYMMDDHHMM)
410 |=(% style="width: 160px;" %)HSW1015 ~~1018|(% style="width:282px" %)10^^th^^ period key (Static mode)|(% style="width:452px" %)Character Input/ Display (length: 8)
411 |=(% style="width: 160px;" %)HSW1019 ~~ 1023|(% style="width:282px" %)10^^th ^^expiry time (Static mode)|(% style="width:452px" %)Numeric Input/ Display (YYYYMMDDHHMM)
412 |=(% style="width: 160px;" %)HSW1025 ~~1028|(% style="width:282px" %)11^^th^^ period key (Static mode)|(% style="width:452px" %)Character Input/ Display (length: 8)
413 |=(% style="width: 160px;" %)HSW1029 ~~ 1033|(% style="width:282px" %)11^^th ^^expiry time (Static mode)|(% style="width:452px" %)Numeric Input/ Display (YYYYMMDDHHMM)
414 |=(% style="width: 160px;" %)HSW1035 ~~1038|(% style="width:282px" %)12^^th^^ period key (Static mode)|(% style="width:452px" %)Character Input/ Display (length: 8)
415 |=(% style="width: 160px;" %)HSW1039 ~~ 1043|(% style="width:282px" %)12^^th ^^expiry time (Static mode)|(% style="width:452px" %)Numeric Input/ Display (YYYYMMDDHHMM)
416 |=(% style="width: 160px;" %)HSW1046|(% style="width:282px" %)Current period (Static mode)|(% style="width:452px" %)Current period (Range 1-13)
417 |=(% style="width: 160px;" %)HSW1047|(% style="width:282px" %)Save settings (Static mode)|(% style="width:452px" %)(((
418 * HSX1047.0=1: Save static installment information
419 * HSX1047.1=1: Write installment information to registers
420 )))
421 |=(% style="width: 160px;" %)HSW1050~~HSW1065|(% style="width:282px" %)The recipe name that can input csv format|(% style="width:452px" %)Input CSV format recipe file name through "Character Input/ Display".(This function should be used in combination with the recipefunction)
422 |=(% style="width: 160px;" %)HSW1066|(% style="width:282px" %)Configure the type of the CSV file imported|(% style="width:452px" %)(((
423 The CSV file type imported (This function should be used in combination with the recipe function)
424
425 * =0: Import customed CSV file. The data in the file is valid.
426 * =1: Import ordinary recipe files of regular series HMI. The 1st row of the file is invalid.
427 * =2: Import special recipe files of regular series HMI. The 1st and 3nd rows and the 1st colume of the file is invalid.
428 )))
429 |=(% style="width: 160px;" %)HSW1067|(% style="width:282px" %)Location where the CSV file is saved|(% style="width:452px" %)(((
430 Set the path of CSV file (This function should be used in combination with the recipe function)
431
432 * =0: In the CsvFile directory of the USB stick
433 * =1: In the CsvFile directory of the SD card
434 )))
435 |=(% style="width: 160px;" %)HSW1070|(% style="width:282px" %)The time interval (seconds) since the last time the screen was clicked|(% style="width:452px" %)(((
436 Shows how long the current screen has not been clicked, using a decimal unsigned double word (Numeric Input/ Display).
437
438 **✎Note: **This register is cleared to zero regardless of which user clicks on the screen.
439 )))
440 |=(% style="width: 160px;" %)HSW1073|(% style="width:282px" %)Corresponding key value from keyboard|(% style="width:452px" %)Display the key value of the currently pressed key, the key value is shown in Table 1 (not updated when the character input display is being input)
441 |=(% style="width: 160px;" %)HSW1074|(% style="width:282px" %)Keyboard key status|(% style="width:452px" %)Display the current button status (not updated when the numeric input display is being input)(((
442 * =0: key release
443 * =1: key press
444 * =2: Long press the button
445 )))
446 |=(% style="width: 160px;" %)HSW1075|(% style="width:282px" %)Cursor speed|(% style="width:452px" %)Control the cursor movement speed, the range is 0～100, the default is 20
447 |=(% style="width: 160px;" %)HSW1076|(% style="width:282px" %)Cursor x coordinate value|(% style="width:452px" %)Record the x value at the current position of the cursor, range: 0 to screen width -1
448 |=(% style="width: 160px;" %)HSW1077|(% style="width:282px" %)Cursor y coordinate value|(% style="width:452px" %)Record the y value at the current position of the cursor, range: 0 to screen height-1
449 |=(% style="width: 160px;" %)HSW1078|(% style="width:282px" %)Corresponding ASCII code for keyboard keys|(% style="width:452px" %)Only the ASCII value of letters, numbers, and symbols are displayed, and the ASCII value of the function button is not displayed.
450 |=(% style="width: 160px;" %)HSW1079|(% style="width:282px" %)Trigger to set the cursor position and set the Enter key mode|(% style="width:452px" %)(((
451 * HSX1079.0=1: Set the cursor position according to the cursor xy register value;
452 * HSX1079.1=0: When the numeric/character input display is being input, press Enter to end the input, no value/text part is being input, Enter is a normal click;
453 * HSX1079.1=1 Regardless of whether the numeric/character component is inputting the Enter key, only normal click is performed, and the keyboard end input is not performed.
454 )))
455 |=(% style="width: 160px;" %)HSW1083|(% style="width:282px" %)Naming method for printing object screenshots|(% style="width:452px" %)(((
456 Example: The time is 2019-01-04 14:29:10 (523 milliseconds), the screen number is 0, and the object ID is 2.
457
458 * =0: Use year, month, day, hour, minute, second, millisecond, screen number, part number to name, such as: 2019010414291052302.bmp.
459 * =1: Name using year, month, day, hour, minute, and second.
460
461 For example: 20190104142910.bmp.
462 )))
463 |=(% style="width: 160px;" %)HSW1086|(% style="width:282px" %)Control address mapping polling cycle, unit: ms|(% style="width:452px" %)(((
464 Address mapping polling cycle, effective range: 40~~1000ms, default: 300ms.
465
466 * When the set value is greater than 1000, the value is 1000.
467 * When the set value is greater than 1000, it changes to the default value 300
468 )))
469 |=(% style="width: 160px;" %)HSW1087|(% style="width:282px" %)Control write interval in address mapping|(% style="width:452px" %)(((
470 After reading data to the device for N times, Perform an address mapping write operation. N is the interval value. The effective range: 0~~5, and default is 2.
471
472 When N more than 5, it is 5.
473
474 0 is the fastest and 5 is the slowest.
475 )))
476 |=(% style="width: 160px;" %)HSW1088|(% style="width:282px" %)Control the write interval of script|(% style="width:452px" %)(((
477 After reading data to the device for N times, Perform a script write operation. N is the interval value. The effective range: 0~~5, and default is 2.
478
479 When N more than 5, it is 5.
480
481 0 is the fastest and 5 is the slowest.
482 )))
483 |=(% style="width: 160px;" %)HSW1089|(% style="width:282px" %)Control interval of read through|(% style="width:452px" %)(((
484 After reading data to the device for N times, Perform a read through operation. N is the interval value. The effective range: 0~~5, and default is 2.
485
486 When N more than 5, it is 5.
487
488 0 is the fastest and 5 is the slowest.
489 )))
490 |=(% style="width: 160px;" %)HSW1100|(% colspan="1" rowspan="4" style="width:282px" %)Set the Master IP for Multi-link|(% style="width:452px" %)High word 1 for Master IP address of multi-link
491 |=(% style="width: 160px;" %)HSW1101|(% style="width:452px" %)High word 2 for Master IP address of multi-link
492 |=(% style="width: 160px;" %)HSW1102|(% style="width:452px" %)High word 3 for Master IP address of multi-link
493 |=(% style="width: 160px;" %)HSW1103|(% style="width:452px" %)High word 4 for Master IP address of multi-link
494 |=(% style="width: 160px;" %)HSW1104|(% style="width:282px" %)Control connection to Master or not for Multi-link slave device|(% style="width:452px" %)(((
495 * =1: Connect to the Master
496 * =0: Do not connect to Master
497 )))
498 |=(% style="width: 160px;" %)HSW1141|(% style="width:282px" %)Release alarm|(% style="width:452px" %)(((
499 * =0, Default value
500 * =1, Release the alarm generated before the last power-down when starting up
501 )))
502 |=(% style="width: 160px;" %)HSW1200|(% colspan="1" rowspan="2" style="width:282px" %)TSAP settings for HMI in the Siemens LOGO! 8 protocol(ig series or HMI V2.0)|(% style="width:452px" %)HMI local TSAP, which corresponds to the remote TSAP of PLC
503 |=(% style="width: 160px;" %)HSW1201|(% style="width:452px" %)HMI remote TSAP, which corresponds to the local TSAP of PLC
504 |=(% style="width: 160px;" %)HSW1450|(% style="width:282px" %)Enable objects level password function|(% style="width:452px" %)(((
505 * =0, Disable
506 * =1, Enable
507 )))
508 |=(% style="width: 160px;" %)HSW1451|(% style="width:282px" %)Whether the object level passwords are independent of each other|(% style="width:452px" %)(((
509 * =0, No, high-level passwords can unlock low-level
510 * = 1, Yes, high-level passwords cannot unlock low-level
511 )))
512 |=(% style="width: 160px;" %)HSW1452|(% style="width:282px" %)Initialization level|(% style="width:452px" %)Initialization level while HMI running
513 |=(% style="width: 160px;" %)HSW1454~~1457|(% style="width:282px" %)Password for Level 1|(% style="width:452px" %)(((
514 Display password for level 1, using character input object, up to 8 characters (numbers, letters (case sensitive))
515 )))
516 |=(% style="width: 160px;" %)HSW1458~~1461|(% style="width:282px" %)Password for Level 2|(% style="width:452px" %)Display password for level 2, using character input object, up to 8 characters (numbers, letters (case sensitive))
517 |=(% style="width: 160px;" %)HSW1462~~1465|(% style="width:282px" %)Password for Level 3|(% style="width:452px" %)Display password for level 3, using character input object, up to 8 characters (numbers, letters (case sensitive))
518 |=(% style="width: 160px;" %)HSW1466~~1469|(% style="width:282px" %)Password for Level 4|(% style="width:452px" %)Display password for level 4, using character input object, up to 8 characters (numbers, letters (case sensitive))
519 |=(% style="width: 160px;" %)HSW1470~~1473|(% style="width:282px" %)Password for Level 5|(% style="width:452px" %)Display password for level 5, using character input object, up to 8 characters (numbers, letters (case sensitive))
520 |=(% style="width: 160px;" %)HSW1474~~1477|(% style="width:282px" %)Password for Level 6|(% style="width:452px" %)Display password for level 6, using character input object, up to 8 characters (numbers, letters (case sensitive))
521 |=(% style="width: 160px;" %)HSW1478~~1481|(% style="width:282px" %)Password for Level 7|(% style="width:452px" %)Display password for level 7, using character input object, up to 8 characters (numbers, letters (case sensitive))
522 |=(% style="width: 160px;" %)HSW1482~~1485|(% style="width:282px" %)Password for Level 8|(% style="width:452px" %)Display password for level 8, using character input object, up to 8 characters (numbers, letters (case sensitive))
523 |=(% style="width: 160px;" %)HSW1486~~1489|(% style="width:282px" %)Password for Level 9|(% style="width:452px" %)Display password for level 9, using character input object, up to 8 characters (numbers, letters (case sensitive))
524 |=(% style="width: 160px;" %)HSW1490~~1493|(% style="width:282px" %)Password for Level 10|(% style="width:452px" %)Display password for level 10, using character input object, up to 8 characters (numbers, letters (case sensitive))
525 |=(% style="width: 160px;" %)HSW1494~~1497|(% style="width:282px" %)Password for Level 11|(% style="width:452px" %)Display password for level 11, using character input object, up to 8 characters (numbers, letters (case sensitive))
526 |=(% style="width: 160px;" %)HSW1498~~1501|(% style="width:282px" %)Password for Level 12|(% style="width:452px" %)Display password for level 12, using character input object, up to 8 characters (numbers, letters (case sensitive))
527 |=(% style="width: 160px;" %)HSW1502|(% style="width:282px" %)Modify password for object level|(% style="width:452px" %)(((
528 * HSX1502.0=1: Modification comfirmed. Save the data of HSW1450~~HSW1501 to a file for immediate effect.
529 * HSX1502.1=1:Modification cancelled. Restore the current data of hSW1450-HSW1501 to the data saved in the file last time.
530 )))
531 |=(% style="width: 160px;" %)HSW1509|(% style="width:282px" %)Curve width|(% style="width:452px" %)(((
532 * =0: Use the curve width set by project default.
533 * =1 to 10: use special register to set curve width.
534 )))
535 |=(% style="width: 160px;" %)HSW1603|(% style="width:282px" %)Number of current unreleased alarms|(% style="width:452px" %)The number of current unreleased alarms in alarm record file.
536 |=(% style="width: 160px;" %)HSW1604|(% style="width:282px" %)The auxiliary judgment address when the control bit in the Object Lock fails to be read|(% style="width:452px" %)(((
537 * =0: The auxiliary address is invalid.
538 * =1: When the communication fails, lock the object.
539 * =2: When the communication fails, unlock the object.
540 * =Others: The auxiliary address is invalid.
541 )))
542 |=(% style="width: 160px;" %)HSW1605|(% style="width:282px" %)BCD format natural decimal control|(% style="width:452px" %)(((
543 Whether to display natural decimals with decimal point in BCD format:
544
545 * 0=Not enabled.
546 * 1=Enable.
547
548 (For example, 56.20 is displayed as 56.2, 33.00 is displayed as 33)
549 )))
550 |=(% style="width: 160px;" %)HSW1606|(% style="width:282px" %)User permission modification control|(% style="width:452px" %)(((
551 * =0: Ordinary users are allowed to modify permissions and other operations
552 * =1: Only the administrator can operate (default is 0)
553 )))
554 |=(% style="width: 160px;" %)HSW1607|(% style="width:282px" %)The spacing value among the drop-down items of the drop-down list|(% style="width:452px" %)10 to 50 is effective, such as: 23 is 2.3 times the height of the object.
555 |=(% style="width: 160px;" %)HSW1611|(% style="width:282px" %)(((
556 Traditional recipe transfer
557 )))|(% style="width:452px" %)(((
558 * =1: download traditional recipe.
559 * =2: upload the traditional recipe.
560 )))
561 |=(% style="width: 160px;" %)HSW1612|(% style="width:282px" %)Traditional Recipe group number|(% style="width:452px" %)Traditional Recipe group number
562 |=(% style="width: 160px;" %)HSW1613|(% style="width:282px" %)Display the status of network card|(% style="width:452px" %)(((
563 * =1: Normal
564 * =Others: Abnormal
565 )))
566 |=(% style="width: 160px;" %)HSW1614~~1623|(% style="width:282px" %)Download speed per second|(% style="width:452px" %)Display the download speed per second. (The value is string)
567 |=(% style="width: 160px;" %)HSW1624~~1633|(% style="width:282px" %)Upnload speed per second|(% style="width:452px" %)Display the upload speed per second. (The value is string)
568 |=(% style="width: 160px;" %)HSW1634~~1643|(% style="width:282px" %)Flow consumption rate|(% style="width:452px" %)Display the total flow rate per second (The value is string)
569 |=(% style="width: 160px;" %)HSW1644~~1653|(% style="width:282px" %)Download flow consumption after power on|(% style="width:452px" %)Display the download flow consumption after power on (The value is string)
570 |=(% style="width: 160px;" %)HSW1654~~1663|(% style="width:282px" %)Upload flow consumption after power on|(% style="width:452px" %)Display the upload flow consumption after power on (The value is string)
571 |=(% style="width: 160px;" %)HSW1664~~1673|(% style="width:282px" %)Total flow consumption after power on|(% style="width:452px" %)Display the total flow consumption after power on (download and upload). (The value is string)
572 |=(% style="width: 160px;" %)HSW1674~~1683|(% style="width:282px" %)Historical flow consumption|(% style="width:452px" %)Display historical flow consumption (download and upload). (The value is string)
573 |=(% style="width: 160px;" %)HSW1684~~1693|(% style="width:282px" %)Flow consumption in 10 minutes|(% style="width:452px" %)Flow consumption in 10 minutes (download and upload). (The value is string)
574 |=(% style="width: 160px;" %)HSW1694~~1703|(% style="width:282px" %)Flow consumption in 30 minutes|(% style="width:452px" %)Flow consumption in 30 minutes (download and upload). (The value is string)
575 |=(% style="width: 160px;" %)HSW1704~~1713|(% style="width:282px" %)Flow consumption in 3 hours|(% style="width:452px" %)Flow consumption in 3 hours (download and upload). (The value is string)
576 |=(% style="width: 160px;" %)HSW1715|(% style="width:282px" %)Reset flow|(% style="width:452px" %)(((
577 * =1: Clear historical flow data and restart the count.
578 * =Others: Invalid
579 )))
580 |=(% style="width: 160px;" %)HSW1719|(% style="width:282px" %)Network status of Ethernet connnecting to server|(% style="width:452px" %)(((
581 * =0: Server connection exception
582 * =1: Server connection is OK
583 )))
584 |=(% style="width: 160px;" %)HSW1720|(% colspan="1" rowspan="12" style="width:282px" %)Related IP register in WIFI network status (It is valid when HMI is connected to WIFI)|(% style="width:452px" %)Local IP address high byte 1
585 |=(% style="width: 160px;" %)HSW1721|(% style="width:452px" %)Local IP address high byte 2
586 |=(% style="width: 160px;" %)HSW1722|(% style="width:452px" %)Local IP address high byte 3
587 |=(% style="width: 160px;" %)HSW1723|(% style="width:452px" %)Local IP address high byte 4
588 |=(% style="width: 160px;" %)HSW1724|(% style="width:452px" %)Local mask IP address high byte 1
589 |=(% style="width: 160px;" %)HSW1725|(% style="width:452px" %)Local mask IP address high byte 2
590 |=(% style="width: 160px;" %)HSW1726|(% style="width:452px" %)Local mask IP address high byte 3
591 |=(% style="width: 160px;" %)HSW1727|(% style="width:452px" %)Local mask IP address high byte 4
592 |=(% style="width: 160px;" %)HSW1728|(% style="width:452px" %)Local gateway IP address high byte 1
593 |=(% style="width: 160px;" %)HSW1729|(% style="width:452px" %)Local gateway IP address high byte 2
594 |=(% style="width: 160px;" %)HSW1730|(% style="width:452px" %)Local gateway IP address high byte 3
595 |=(% style="width: 160px;" %)HSW1731|(% style="width:452px" %)Local gateway IP address high byte 4
596 |=(% style="width: 160px;" %)HSW1733|(% colspan="1" rowspan="6" style="width:282px" %)(((
597 Display the MAC code of current WIFI
598
599 (display in hexadecimal)
600 )))|(% style="width:452px" %)Local MAC address high byte 1 (hexadecimal)
601 |=(% style="width: 160px;" %)HSW1734|(% style="width:452px" %)Local MAC address high byte 2 (hexadecimal)
602 |=(% style="width: 160px;" %)HSW1735|(% style="width:452px" %)Local MAC address high byte 3 (hexadecimal)
603 |=(% style="width: 160px;" %)HSW1736|(% style="width:452px" %)Local MAC address high byte 4 (hexadecimal)
604 |=(% style="width: 160px;" %)HSW1737|(% style="width:452px" %)Local MAC address high byte 5 (hexadecimal)
605 |=(% style="width: 160px;" %)HSW1738|(% style="width:452px" %)Local MAC address high byte 6 (hexadecimal)
606 |=(% style="width: 160px;" %)HSW1739|(% style="width:282px" %)Display the network status of WIFI|(% style="width:452px" %)(((
607 * =0: Server connection exception
608 * =1: Server connection is OK
609 )))
610 |=(% style="width: 160px;" %)HSW1740|(% style="width:282px" %)Wi-fi signal strength|(% style="width:452px" %)(((
611 Display the value of Wi-fi signal signal strength, ranges from 0~~100 (Signal strength is automatically obtained only once when HMI is powered on, and it will not be automatically updated. It needs to be used with the HSW1890)
612 )))
613 |=(% style="width: 160px;" %)HSW1741|(% colspan="1" rowspan="12" style="width:282px" %)Related IP register in 4Gnetwork status (It is valid when HMI is connected to 4G)|(% style="width:452px" %)Local IP address high byte 1
614 |=(% style="width: 160px;" %)HSW1742|(% style="width:452px" %)Local IP address high byte 2
615 |=(% style="width: 160px;" %)HSW1743|(% style="width:452px" %)Local IP address high byte 3
616 |=(% style="width: 160px;" %)HSW1744|(% style="width:452px" %)Local IP address high byte 4
617 |=(% style="width: 160px;" %)HSW1745|(% style="width:452px" %)Local mask IP address high byte 1
618 |=(% style="width: 160px;" %)HSW1746|(% style="width:452px" %)Local mask IP address high byte 2
619 |=(% style="width: 160px;" %)HSW1747|(% style="width:452px" %)Local mask IP address high byte 3
620 |=(% style="width: 160px;" %)HSW1748|(% style="width:452px" %)Local mask IP address high byte 4
621 |=(% style="width: 160px;" %)HSW1749|(% style="width:452px" %)Local gateway IP address high byte 1
622 |=(% style="width: 160px;" %)HSW1750|(% style="width:452px" %)Local gateway IP address high byte 2
623 |=(% style="width: 160px;" %)HSW1751|(% style="width:452px" %)Local gateway IP address high byte 3
624 |=(% style="width: 160px;" %)HSW1752|(% style="width:452px" %)Local gateway IP address high byte 4
625 |=(% style="width: 160px;" %)HSW1754|(% colspan="1" rowspan="6" style="width:282px" %)(((
626 Display the MAC code of current WIFI
627
628 (display in hexadecimal)
629 )))|(% style="width:452px" %)Local MAC address high byte 1 (hexadecimal)
630 |=(% style="width: 160px;" %)HSW1755|(% style="width:452px" %)Local MAC address high byte 2 (hexadecimal)
631 |=(% style="width: 160px;" %)HSW1756|(% style="width:452px" %)Local MAC address high byte 3 (hexadecimal)
632 |=(% style="width: 160px;" %)HSW1757|(% style="width:452px" %)Local MAC address high byte 4 (hexadecimal)
633 |=(% style="width: 160px;" %)HSW1758|(% style="width:452px" %)Local MAC address high byte 5 (hexadecimal)
634 |=(% style="width: 160px;" %)HSW1759|(% style="width:452px" %)Local MAC address high byte 6 (hexadecimal)
635 |=(% style="width: 160px;" %)HSW1760|(% style="width:282px" %)Display 4G network status|(% style="width:452px" %)(((
636 * =0: Server connection exception
637 * =1: Server connection is OK
638 )))
639 |=(% style="width: 160px;" %)HSW1761|(% style="width:282px" %)Display 4G network signal strength|(% style="width:452px" %)Signal strength: 0~~31. The greater the value ,the signal is stronger
640 |=(% style="width: 160px;" %)(((
641 HSW1762
642 )))|(% colspan="1" rowspan="13" style="width:282px" %)(((
643 Note: Valid when Ethernet2 of HMI is plugged into the network cable.
644 ①、When the Ethernet setting is enabled in the project parameters, this register displays the set value.
645 ②. When the Ethernet setting is not enabled in the engineering parameters, the register displays the Ethernet IP automatically acquired by the HMI.
646 ③. When the HMI is not plugged into the network cable, the register will show 0 whether the engineering parameters are set or not.
647 ④.IP related registers can be read and written (only static IP mode can be written).
648 )))|(% style="width:452px" %)(((
649 Ethernet2 Local IP address high byte 1
650 )))
651 |=(% style="width: 160px;" %)(((
652 HSW1763
653 )))|(% style="width:452px" %)(((
654 Ethernet2 Local IP address high byte 2
655 )))
656 |=(% style="width: 160px;" %)(((
657 HSW1764
658 )))|(% style="width:452px" %)(((
659 Ethernet2 Local IP address high byte 3
660 )))
661 |=(% style="width: 160px;" %)(((
662 HSW1765
663 )))|(% style="width:452px" %)(((
664 Ethernet2 Local IP address high byte 4
665 )))
666 |=(% style="width: 160px;" %)(((
667 HSW1766
668 )))|(% style="width:452px" %)(((
669 Ethernet2 Local mask IP address high byte 1
670 )))
671 |=(% style="width: 160px;" %)(((
672 HSW1767
673 )))|(% style="width:452px" %)(((
674 Ethernet2 Local mask IP address high byte 2
675 )))
676 |=(% style="width: 160px;" %)(((
677 HSW1768
678 )))|(% style="width:452px" %)Ethernet2 Local mask IP address high byte 3
679 |=(% style="width: 160px;" %)HSW1769|(% style="width:452px" %)Ethernet2 Local mask IP address high byte 4
680 |=(% style="width: 160px;" %)(((
681 HSW1770
682 )))|(% style="width:452px" %)(((
683 Ethernet2 Local gateway IP address high byte 1
684 )))
685 |=(% style="width: 160px;" %)(((
686 HSW1771
687 )))|(% style="width:452px" %)(((
688 Ethernet2 Local gateway IP address high byte 2
689 )))
690 |=(% style="width: 160px;" %)(((
691 HSW1772
692 )))|(% style="width:452px" %)(((
693 Ethernet2 Local gateway IP address high byte 3
694 )))
695 |=(% style="width: 160px;" %)(((
696 HSW1773
697 )))|(% style="width:452px" %)(((
698 Ethernet2 Local gateway IP address high byte 4
699 )))
700 |=(% style="width: 160px;" %)(((
701 HSW1774
702 )))|(% style="width:452px" %)(((
703 Ethernet2 Local Port Address
704 )))
705 |=(% style="width: 160px;" %)(((
706 HSW1775
707 )))|(% colspan="1" rowspan="6" style="width:282px" %)(((
708 ①Display the MAC code of Ethernet2 NIC
709
710 (hexadecimal display)
711
712 ②Read-only mode, not modifiable
713 )))|(% style="width:452px" %)(((
714 Ethernet2 Local MAC code high byte 1
715 )))
716 |=(% style="width: 160px;" %)(((
717 HSW1776
718 )))|(% style="width:452px" %)(((
719 Ethernet2 Local MAC code high byte 2
720 )))
721 |=(% style="width: 160px;" %)(((
722 HSW1777
723 )))|(% style="width:452px" %)(((
724 Ethernet2 Local MAC code high byte 3
725 )))
726 |=(% style="width: 160px;" %)(((
727 HSW1778
728 )))|(% style="width:452px" %)(((
729 Ethernet2 Local MAC code high byte 4
730 )))
731 |=(% style="width: 160px;" %)(((
732 HSW1779
733 )))|(% style="width:452px" %)(((
734 Ethernet2 Local MAC code high byte 5
735 )))
736 |=(% style="width: 160px;" %)(((
737 HSW1780
738 )))|(% style="width:452px" %)(((
739 Ethernet2 Local MAC code high byte 6
740 )))
741 |=(% style="width: 160px;" %)(((
742 HSW1781
743 )))|(% colspan="1" rowspan="8" style="width:282px" %)(((
744 ①Display and modify DNS1 and DNS2 of Ethernet2
745
746 ②Related registers can be read and written mode (only static IP mode can be written)
747 )))|(% style="width:452px" %)(((
748 Ethernet2 Local DNS1 address high byte 1
749 )))
750 |=(% style="width: 160px;" %)(((
751 HSW1782
752 )))|(% style="width:452px" %)(((
753 Ethernet2 Local DNS1 address high byte 2
754 )))
755 |=(% style="width: 160px;" %)(((
756 HSW1783
757 )))|(% style="width:452px" %)(((
758 Ethernet2 Local DNS1 address high byte 3
759 )))
760 |=(% style="width: 160px;" %)(((
761 HSW1784
762 )))|(% style="width:452px" %)(((
763 Ethernet2 Local DNS1 address high byte 4
764 )))
765 |=(% style="width: 160px;" %)(((
766 HSW1785
767 )))|(% style="width:452px" %)(((
768 Ethernet2 Local DNS2 address high byte 1
769 )))
770 |=(% style="width: 160px;" %)(((
771 HSW1786
772 )))|(% style="width:452px" %)(((
773 Ethernet2 Local DNS2 address high byte 2
774 )))
775 |=(% style="width: 160px;" %)(((
776 HSW1787
777 )))|(% style="width:452px" %)(((
778 Ethernet2 Local DNS2 address high byte 3
779 )))
780 |=(% style="width: 160px;" %)(((
781 HSW1788
782 )))|(% style="width:452px" %)(((
783 Ethernet2 Local DNS2 address high byte 4
784 )))
785 |=(% style="width: 160px;" %)(((
786 HSW1789
787 )))|(% colspan="1" style="width:282px" %)(((
788 Display or set the dynamic or static IP mode of Ethernet2
789 )))|(% style="width:452px" %)(((
790 HSX1789.0 = 0, Static IP mode
791
792 HSX1789.0 = 1, dynamic IP mode
793 )))
794 |=(% style="width: 160px;" %)(((
795 HSW1790
796 )))|(% colspan="1" style="width:282px" %)(((
797 Confirm Ethernet2 IP, subnet mask, gateway, DNS1, DNS2, and dynamic static IP settings
798 )))|(% style="width:452px" %)(((
799 ~= 1, confirm the setting (i.e., after modifying IP-related information, set this address to 1, representing confirmation of the modification, after which it will be reset to 0)
800 )))
801 |=(% style="width: 160px;" %)(((
802 HSW1791
803 )))|(% colspan="1" style="width:282px" %)(((
804 Network status of the Ethernet2 connection server
805 )))|(% style="width:452px" %)(((
806 ~= 0, connection to the server is abnormal = 1, connection to the server is normal
807 )))
808 |=(% style="width: 160px;" %)HSW1852|(% style="width:282px" %)Control the interval in two consecutive clicks|(% style="width:452px" %)Limit range: 1~~500ms. The default is 100 ms.
809 |=(% style="width: 160px;" %)HSW1853|(% style="width:282px" %)File format for exporting data records to USB flash drive or SD card|(% style="width:452px" %)(((
810 * =0: db database
811 * =1: CSV
812
813 (Only valid for script function DbToCsvFile)
814 )))
815 |=(% style="width: 160px;" %)HSW1854|(% style="width:282px" %)High and low word conversion type|(% style="width:452px" %)(((
816 * =0: use the old high-low word conversion (default)
817 * =1: usie the new high-low word conversion
818 )))
819 |=(% style="width: 160px;" %)HSW1855|(% style="width:282px" %)Screen Lock prompt display control|(% style="width:452px" %)(((
820 Control whether the screen lock prompt is displayed,
821
822 * =0: display(default value)
823 * =Other: no display.
824 )))
825 |=(% style="width: 160px;" %)HSW1856|(% style="width:282px" %)Display map fence drawing status|(% style="width:452px" %)(((
826 * =0: no map fence
827 * =1: The map fence is drawn and the device is inside the fence
828 * =2: The map fence is drawn and the device is outside the fence
829 )))
830 |=(% style="width: 160px;" %)HSW1857|(% style="width:282px" %)USB disk download |(% style="width:452px" %)(((
831 * =0: download project
832 * =1: download firmware
833 * =2: enter the background
834 )))
835 |=(% style="width: 160px;" %)HSW1865|(% style="width:282px" %)Priority connection to the cloud|(% style="width:452px" %)(((
836 * =0: priority Ethernet
837 * =1: priority WLAN
838 * =2: priority 4G
839 )))
840 |=(% style="width: 160px;" %)HSW1866|(% style="width:282px" %)Delete the Lua extension module file|(% style="width:452px" %)(((
841 * =0: delete;
842 * = Others: do not delete
843 )))
844 |=(% style="width: 160px;" %)HSW1867|(% style="width:282px" %)Reset mode|(% style="width:452px" %)(((
845 Monitor address is set during reset of reset switch, whether to cancel reset,
846
847 * = 0: yes (default);
848 * = 1: no
849 )))
850 |=(% style="width: 160px;" %)HSW1868|(% style="width:282px" %)Double-click or long press the record type table mode|(% style="width:452px" %)(((
851 Controls whether the button pops up when double-clicking or long pressing on record type table object
852
853 * = 0: yes (default);
854 * = 1: no
855 )))
856 |=(% style="width: 160px;" %)(((
857 HSW1869
858 )))|(% style="width:282px" %)(((
859 Dynamic screensaver countdown
860 )))|(% style="width:452px" %)(((
861 Countdown to enter dynamic screensaver effect, unit (S)
862 )))
863 |=(% style="width: 160px;" %)(((
864 HSW1870
865 )))|(% style="width:282px" %)(((
866 Display or set the dynamic or static IP mode of Ethernet1
867 )))|(% style="width:452px" %)(((
868 HSX1870.0 = 0, Static IP mode
869
870 HSX1870.0 = 1, dynamic IP mode
871 )))
872 |=(% style="width: 160px;" %)(((
873 HSW1871
874 )))|(% style="width:282px" %)(((
875 Confirm the IP, subnet mask, gateway, DNS1, DNS2, and dynamic static IP settings for Ethernet1
876 )))|(% style="width:452px" %)(((
877 ~= 1, confirm the setting (i.e., after modifying IP-related information, set this address to 1, representing confirmation of the modification, after which it will be reset to 0)
878 )))
879 |=(% style="width: 160px;" %)(((
880 HSW1872
881 )))|(% colspan="1" rowspan="8" style="width:282px" %)(((
882 ①Display and modify DNS1 and DNS2 of Ethernet1
883
884 ②Related registers can be read and written mode (only static IP mode can be written)
885 )))|(% style="width:452px" %)(((
886 Ethernet1 Local DNS1 address high byte 1
887 )))
888 |=(% style="width: 160px;" %)(((
889 HSW1873
890 )))|(% style="width:452px" %)Ethernet1 Local DNS1 address high byte 2
891 |=(% style="width: 160px;" %)(((
892 HSW1874
893 )))|(% style="width:452px" %)Ethernet1 Local DNS1 address high byte 3
894 |=(% style="width: 160px;" %)(((
895 HSW1875
896 )))|(% style="width:452px" %)Ethernet1 Local DNS1 address high byte 4
897 |=(% style="width: 160px;" %)(((
898 HSW1876
899 )))|(% style="width:452px" %)Ethernet1 Local DNS2 address high byte 1
900 |=(% style="width: 160px;" %)(((
901 HSW1877
902 )))|(% style="width:452px" %)Ethernet1 Local DNS2 address high byte 2
903 |=(% style="width: 160px;" %)(((
904 HSW1878
905 )))|(% style="width:452px" %)Ethernet1 Local DNS2 address high byte 3
906 |=(% style="width: 160px;" %)(((
907 HSW1879
908 )))|(% style="width:452px" %)Ethernet1 Local DNS2 address high byte 4
909 |=(% style="width: 160px;" %)HSW1890|(% colspan="1" style="width:282px" %)Enable refresh current network signal|(% style="width:452px" %)(((
910 * =1: Refresh the network signal once after triggered (This register will be automatically reset after triggered, only update the signal value once after per 15 seconds, not able to update twice in the short interval)
911 * =Others: not refresh
912 )))
913 |=(% style="width: 160px;" %)HSW1891|(% colspan="1" style="width:282px" %)Enable clear cache for screen data  |(% style="width:452px" %)(((
914 * =1, not clear screen cache when switch language
915 * =2, trigger clear cache of all screens for once time
916 * =3, always clear cache of all screen data
917 )))
918 |=(% style="width: 160px;" %)HSW10000~~19999|(% style="width:282px" %)Power-down storage area|(% style="width:452px" %)After restart, the data remains
919 |=(% style="width: 160px;" %)HSW10035|(% rowspan="13" style="width:282px" %)(((
920 Note: Valid when Ethernet1 of HMI is plugged into the network cable.
921 ①、When the Ethernet setting is enabled in the project parameters, this register displays the set value.
922 ②. When the Ethernet setting is not enabled in the engineering parameters, the register displays the Ethernet IP automatically acquired by the HMI.
923 ③. When the HMI is not plugged into the network cable, the register will show 0 whether the engineering parameters are set or not.
924 ④.IP related registers can be read and written (only static IP mode can be written).
925 )))|(% style="width:452px" %)Local IP address high byte 1
926 |=(% style="width: 160px;" %)HSW10036|(% style="width:452px" %)Local IP address high byte 2
927 |=(% style="width: 160px;" %)HSW10037|(% style="width:452px" %)Local IP address high byte 3
928 |=(% style="width: 160px;" %)HSW10038|(% style="width:452px" %)Local IP address high byte 4
929 |=(% style="width: 160px;" %)HSW10039|(% style="width:452px" %)Local mask IP address high byte 1
930 |=(% style="width: 160px;" %)HSW10040|(% style="width:452px" %)Local mask IP address high byte 2
931 |=(% style="width: 160px;" %)HSW10041|(% style="width:452px" %)Local mask IP address high byte 3
932 |=(% style="width: 160px;" %)HSW10042|(% style="width:452px" %)Local mask IP address high byte 4
933 |=(% style="width: 160px;" %)HSW10043|(% style="width:452px" %)Local gateway address high byte 1
934 |=(% style="width: 160px;" %)HSW10044|(% style="width:452px" %)Local gateway address high byte 2
935 |=(% style="width: 160px;" %)HSW10045|(% style="width:452px" %)Local gateway address high byte 3
936 |=(% style="width: 160px;" %)HSW10046|(% style="width:452px" %)Local gateway address high byte 4
937 |=(% style="width: 160px;" %)HSW10047|(% style="width:452px" %)Local port address
938 |=(% style="width: 160px;" %)HSW10048|(% rowspan="6" style="width:282px" %)(((
939 ①Display the MAC code of Ethernet1 NIC
940
941 (hexadecimal display)
942
943 ②Read-only mode, not modifiable
944 )))|(% style="width:452px" %)Local MAC code high word 1
945 |=(% style="width: 160px;" %)HSW10049|(% style="width:452px" %)Local MAC code high word 2
946 |=(% style="width: 160px;" %)HSW10050|(% style="width:452px" %)Local MAC code high word 3
947 |=(% style="width: 160px;" %)HSW10051|(% style="width:452px" %)Local MAC code high word 4
948 |=(% style="width: 160px;" %)HSW10052|(% style="width:452px" %)Local MAC code high word 5
949 |=(% style="width: 160px;" %)HSW10053|(% style="width:452px" %)Local MAC code high word 6
950 |=(% style="width: 160px;" %)HSW10118|(% colspan="1" rowspan="2" style="width:282px" %)TSAP settings for HMI in the Siemens LOGO! 8 protocol|(% style="width:452px" %)HMI local TSAP, which corresponds to the remote TSAP of PLC
951 |=(% style="width: 160px;" %)HSW10119|(% style="width:452px" %)HMI remote TSAP, which corresponds to the local TSAP of PLC
952 |=(% style="width: 160px;" %)HSW10461~~10493|(% style="width:282px" %)Remote access password|(% style="width:452px" %)8-character remote access password
953 |=(% style="width: 160px;" %)HSW10494~~10558|(% style="width:282px" %)Machine ID (Read only)|(% style="width:452px" %)Machine ID for remote access (read only 64-bit)
954 |=(% style="width: 160px;" %)HSW10576|(% style="width:282px" %)Save dynamic installment settings|(% style="width:452px" %)HSX10576.0=1: Save the set dynamic installment information
955 |=(% style="width: 160px;" %)HSW10577|(% style="width:282px" %)Control address for installment|(% style="width:452px" %)(((
956 * HSX10577.0=0: disable dynamic installment
957 * HSX10577.0=1: enable dynamic installment
958 * HSX10577.1=0: disable static installment
959 * HSX10577.1=1: enable static installment
960 )))
961 |=(% style="width: 160px;" %)HSW10578-10583|(% style="width:282px" %)Password for dynamic installment|(% style="width:452px" %)Character Input/ Display (length: 6)
962 |=(% style="width: 160px;" %)HSW10584-10586|(% style="width:282px" %)Expiry time of dynamic installment|(% style="width:452px" %)Expiry time: YYYYMMDD (Numeric Input/ Display)
963 |=(% style="width: 160px;" %)HSW10587-10589|(% style="width:282px" %)Last expiry time of dynamic installment|(% style="width:452px" %)Expiry time: YYYYMMDD (Numeric Input/ Display)
964 |=(% style="width: 160px;" %)HSW10590|(% style="width:282px" %)Background light time|(% style="width:452px" %)(((
965 Set the light time for background
966
967 * =0: The screen backlight is always on.
968 * =Others: The screen backlight is on for a period of time and then turns off. The length of time is controlled by the value of the register address. Unit: second.
969 )))
970 |=(% style="width: 160px;" %)HSW10591|(% style="width:282px" %)Backlight brightness adjustment|(% style="width:452px" %)Backlight brightness range: 1 (darkest) ~~ 100 (brightest)
971 |=(% style="width: 160px;" %)HSW10603|(% style="width:282px" %)Set the printer to print orientation|(% style="width:452px" %)(((
972 Set the print direction:
973
974 * =1: Forward printing
975 * =2: Reverse print
976 * =Other: Forward print
977 )))
978 |=(% style="width: 160px;" %)HSW10604|(% style="width:282px" %)Print dot type|(% style="width:452px" %)(((
979 * =1: new firmware 8 dot matrix type
980 * =2: new firmware 24 dot matrix type
981 * =3: old firmware 8 dot matrix type
982 * =4: old firmware 24 dot matrix type
983 * =Other: new firmware 8 dot matrix type
984 )))
985 |=(% style="width: 160px;" %)HSW10605|(% style="width:282px" %)Print width of printer|(% style="width:452px" %)Set the width of the printer to print (in pixels), such as HSW10605 = 394: The printer supports images with a print width of 394 pixels
986 |=(% style="width: 160px;" %)HSW10606|(% style="width:282px" %)Printer instruction type|(% style="width:452px" %)(((
987 * =1: Graphic print type
988 * =2: Dot density printing type
989 * =3: special for EPSON printer
990 )))
991 |=(% style="width: 160px;" %)HSW10607|(% style="width:282px" %)Printer paper cutting function|(% style="width:452px" %)(((
992 * =1: Enable
993 * =2: Disable
994 )))
995 |=(% style="width: 160px;" %)HSW10608|(% style="width:282px" %)Print the alignment of the text|(% style="width:452px" %)(((
996 * =1: Left alignment
997 * =2: Center alignment
998 * =3: Right alignment
999 )))
1000 |=(% style="width: 160px;" %)HSW10610|(% style="width:282px" %)Set weconcloud server|(% style="width:452px" %)(((
1001 * =0: Select the server configured in "Project Settings"
1002 * =1: select Server 1
1003 * =2: select Server 2
1004 )))
1005 |=(% style="width: 160px;" %)HSW11750|(% style="width:282px" %)Set the language of the Message List prompt** (ie series)**|(% style="width:452px" %)(((
1006 * =0: which is followed the project language
1007 * =1: English
1008 * =2: Chinese
1009 )))
1010 |=(% style="width: 160px;" %)HSW11756|(% style="width:282px" %)(((
1011 Access permission restrictions
1012
1013 (ig series and** **8000/9000 series with -R after system upgrade)
1014 )))|(% style="width:452px" %)(((
1015 * =0: LAN or the external network both OK
1016 * =1: Only LAN access
1017 * =2: Only external network can access
1018 )))
1019 |=(% style="width: 160px;" %)HSW11757|(% style="width:282px" %)Enable the valid date of the dynamic installment password|(% style="width:452px" %)(((
1020 * =0: Disabled
1021 * =1: Enable
1022 )))
1023 |=(% style="width: 160px;" %)HSW11758|(% style="width:282px" %)Enable Screensaver|(% style="width:452px" %)(((
1024 * =0: Disabled
1025 * =1: Enable
1026 )))
1027 |=(% style="width: 160px;" %)HSW11759|(% style="width:282px" %)Screensaver interval time|(% style="width:452px" %)(((
1028 Set the time how long will enter Screensaver (Range 10~~43200s)
1029 )))
1030 |=(% style="width: 160px;" %)HSW11760|(% style="width:282px" %)Screensaver countdown|(% style="width:452px" %)Display the countdown to enter the Screensaver, unit: second.
1031 |=(% style="width: 160px;" %)HSW11761|(% style="width:282px" %)Screensaver screen number|(% style="width:452px" %)Set the screen number for Screensaver
1032 |=(% style="width: 160px;" %)(((
1033 HSW11762
1034 )))|(% style="width:282px" %)(((
1035 Dynamic screensaver control address
1036 )))|(% style="width:452px" %)(((
1037 HSX11762.0=0, initialize with project configuration;
1038
1039 HSX11762.0=1, initialize with special register configuration;
1040
1041 HSX11762.1=0, disable dynamic screensaver;
1042
1043 HSX11762.1=1, enable dynamic screensaver
1044 )))
1045 |=(% style="width: 160px;" %)(((
1046 HSW11763
1047 )))|(% style="width:282px" %)(((
1048 Waiting time to enter the dynamic screensaver
1049 )))|(% style="width:452px" %)(((
1050 Waiting time when the screen is not operated, range 1~~720 minutes
1051 )))
1052 |=(% style="width: 160px;" %)(((
1053 HSW11764
1054 )))|(% style="width:282px" %)(((
1055 Animated screensaver animation type
1056 )))|(% style="width:452px" %)(((
1057 ~=0: Raster,=1: Blinds,=2: Bubble
1058 )))
1059
1060 == Serial port communication configuration ==
1061
1062 (% class="table-bordered" %)
1063 |=(% scope="row" style="width: 102px;" %)Port|=(% style="width: 173px;" %)**Function**|=(% style="width: 122px;" %)**Address**|=(% colspan="2" style="width: 506px;" %)**Description**
1064 |(% colspan="1" rowspan="11" style="width:102px" %)COM1|(% style="width:173px" %)Communication mode|(% style="width:122px" %)HSW10061|(% colspan="2" style="width:506px" %)(((
1065 * =0: RS232
1066 * =1: RS485
1067 * =2: RS422
1068 )))
1069 |(% style="width:173px" %)Baud rate|(% style="width:122px" %)HSW10062|(% colspan="2" style="width:506px" %)(((
1070 * =0: 1200
1071 * =1: 2400
1072 * =2: 4800
1073 * =3: 9600
1074 * =4: 19200
1075 * =5: 38400
1076 * =6: 57600
1077 * =7: 115200
1078 * =8: 230400
1079 )))
1080 |(% style="width:173px" %)Data bit|(% style="width:122px" %)HSW10063|(% colspan="2" style="width:506px" %)(((
1081 * =7: 7 bit
1082 * =8: 8 bit
1083 )))
1084 |(% style="width:173px" %)Stop bit|(% style="width:122px" %)HSW10064|(% colspan="2" style="width:506px" %)(((
1085 * =1: 1 bit
1086 * =2: 2 bit
1087 )))
1088 |(% style="width:173px" %)Check bit|(% style="width:122px" %)HSW10065|(% colspan="2" style="width:506px" %)(((
1089 * =0: None
1090 * =1: ODD
1091 * =2: EVEN
1092 )))
1093 |(% style="width:173px" %)Wait timeout|(% style="width:122px" %)HSW10066|(% colspan="2" style="width:506px" %)(((
1094 * Unit: ms.
1095 * Range: 0 to 30000
1096 )))
1097 |(% style="width:173px" %)reveive timeout|(% style="width:122px" %)HSW10067|(% colspan="2" style="width:506px" %)(((
1098 * Unit: ms.
1099 * Range: 0 to 30000
1100 )))
1101 |(% style="width:173px" %)Retry time|(% style="width:122px" %)HSW10068|(% colspan="2" style="width:506px" %)(((
1102 * Unit: times.
1103 * Range: 0 to 100
1104 )))
1105 |(% style="width:173px" %)Retry timeout|(% style="width:122px" %)HSW10069|(% colspan="2" style="width:506px" %)(((
1106 * Unit: s.
1107 * Range: 0 to 300
1108 )))
1109 |(% style="width:173px" %)HMI station number|(% style="width:122px" %)HSW10070|(% colspan="2" style="width:506px" %)
1110 |(% style="width:173px" %)PLC station number|(% style="width:122px" %)HSW10071|(% colspan="2" style="width:506px" %)
1111 |(% colspan="1" rowspan="11" style="width:102px" %)COM1-2|(% style="width:173px" %)Communication mode|(% style="width:122px" %)HSW10094|(% colspan="2" style="width:506px" %)(((
1112 * =0: RS232
1113 * =1: RS485
1114 * =2: RS422
1115 * =6: RS485-2
1116 )))
1117 |(% style="width:173px" %)Baud rate|(% style="width:122px" %)HSW10095|(% colspan="2" style="width:506px" %)(((
1118 * =0: 1200
1119 * =1: 2400
1120 * =2: 4800
1121 * =3: 9600
1122 * =4: 19200
1123 * =5: 38400
1124 * =6: 57600
1125 * =7: 115200
1126 * =8: 230400
1127 )))
1128 |(% style="width:173px" %)Data bit|(% style="width:122px" %)HSW10096|(% colspan="2" style="width:506px" %)(((
1129 * =7: 7 bit
1130 * =8: 8 bit
1131 )))
1132 |(% style="width:173px" %)Stop bit|(% style="width:122px" %)HSW10097|(% colspan="2" style="width:506px" %)(((
1133 * =1: 1 bit
1134 * =2: 2 bit
1135 )))
1136 |(% style="width:173px" %)Check bit|(% style="width:122px" %)HSW10098|(% colspan="2" style="width:506px" %)(((
1137 * =0: None
1138 * =1: ODD
1139 * =2: EVEN
1140 )))
1141 |(% style="width:173px" %)Wait timeout|(% style="width:122px" %)HSW10099|(% colspan="2" style="width:506px" %)(((
1142 * Unit: ms.
1143 * Range: 0 to 30000
1144 )))
1145 |(% style="width:173px" %)receive timeout|(% style="width:122px" %)HSW10100|(% colspan="2" style="width:506px" %)(((
1146 * Unit: ms.
1147 * Range: 0 to 30000
1148 )))
1149 |(% style="width:173px" %)Retry time|(% style="width:122px" %)HSW10101|(% colspan="2" style="width:506px" %)(((
1150 * Unit: times.
1151 * Range: 0 to 100
1152 )))
1153 |(% style="width:173px" %)Retry timeout|(% style="width:122px" %)HSW10102|(% colspan="2" style="width:506px" %)(((
1154 * Unit: s.
1155 * Range: 0 to 30
1156 )))
1157 |(% style="width:173px" %)HMI station number|(% style="width:122px" %)HSW10103|(% colspan="2" style="width:506px" %)
1158 |(% style="width:173px" %)PLC station number|(% style="width:122px" %)HSW10104|(% colspan="2" style="width:506px" %)
1159 |(% colspan="1" rowspan="11" style="width:102px" %)COM1-3|(% style="width:173px" %)Communication mode|(% style="width:122px" %)HSW10120|(% colspan="2" style="width:506px" %)(((
1160 * =0: RS232
1161 * =1: RS485
1162 * =2: RS422
1163 * =6: RS485-2
1164 )))
1165 |(% style="width:173px" %)Baud rate|(% style="width:122px" %)HSW10121|(% colspan="2" style="width:506px" %)(((
1166 * =0: 1200
1167 * =1: 2400
1168 * =2: 4800
1169 * =3: 9600
1170 * =4: 19200
1171 * =5: 38400
1172 * =6: 57600
1173 * =7: 115200
1174 * =8: 230400
1175 )))
1176 |(% style="width:173px" %)Data bit|(% style="width:122px" %)HSW10122|(% colspan="2" style="width:506px" %)(((
1177 * =7: 7 bit
1178 * =8: 8 bit
1179 )))
1180 |(% style="width:173px" %)Stop bit|(% style="width:122px" %)HSW10123|(% colspan="2" style="width:506px" %)(((
1181 * =1: 1 bit
1182 * =2: 2 bit
1183 )))
1184 |(% style="width:173px" %)Check bit|(% style="width:122px" %)HSW10124|(% colspan="2" style="width:506px" %)(((
1185 * =0: None
1186 * =1: ODD
1187 * =2: EVEN
1188 )))
1189 |(% style="width:173px" %)Wait timeout|(% style="width:122px" %)HSW10125|(% colspan="2" style="width:506px" %)(((
1190 * Unit: ms.
1191 * Range: 0 to 30000
1192 )))
1193 |(% style="width:173px" %)receive timeout|(% style="width:122px" %)HSW10126|(% colspan="2" style="width:506px" %)(((
1194 * Unit: ms.
1195 * Range: 0 to 30000
1196 )))
1197 |(% style="width:173px" %)Retry time|(% style="width:122px" %)HSW10127|(% colspan="2" style="width:506px" %)(((
1198 * Unit: times.
1199 * Range: 0 to 100
1200 )))
1201 |(% style="width:173px" %)Retry timeout|(% style="width:122px" %)HSW10128|(% colspan="2" style="width:506px" %)(((
1202 * Unit: s.
1203 * Range: 0 to 30
1204 )))
1205 |(% style="width:173px" %)HMI station number|(% style="width:122px" %)HSW10129|(% colspan="2" style="width:506px" %)
1206 |(% style="width:173px" %)PLC station number|(% style="width:122px" %)HSW10130|(% colspan="2" style="width:506px" %)
1207 |(% colspan="1" rowspan="11" style="width:102px" %)COM2|(% style="width:173px" %)Communication mode|(% style="width:122px" %)HSW10072|(% colspan="2" style="width:506px" %)(((
1208 * =0: RS232
1209 * =1: RS485
1210 )))
1211 |(% style="width:173px" %)Baud rate|(% style="width:122px" %)HSW10073|(% colspan="2" style="width:506px" %)(((
1212 * =0: 1200
1213 * =1: 2400
1214 * =2: 4800
1215 * =3: 9600
1216 * =4: 19200
1217 * =5: 38400
1218 * =6: 57600
1219 * =7: 115200
1220 * =8: 230400
1221 )))
1222 |(% style="width:173px" %)Data bit|(% style="width:122px" %)HSW10074|(% colspan="2" style="width:506px" %)(((
1223 * =7: 7 bit
1224 * =8: 8 bit
1225 )))
1226 |(% style="width:173px" %)Stop bit|(% style="width:122px" %)HSW10075|(% colspan="2" style="width:506px" %)(((
1227 * =1: 1 bit
1228 * =2: 2 bit
1229 )))
1230 |(% style="width:173px" %)Check bit|(% style="width:122px" %)HSW10076|(% colspan="2" style="width:506px" %)(((
1231 * =0: None
1232 * =1: ODD
1233 * =2: EVEN
1234 )))
1235 |(% style="width:173px" %)Wait timeout|(% style="width:122px" %)HSW10077|(% colspan="2" style="width:506px" %)(((
1236 * Unit: ms.
1237 * Range: 0 to 30000
1238 )))
1239 |(% style="width:173px" %)receive timeout|(% style="width:122px" %)HSW10078|(% colspan="2" style="width:506px" %)(((
1240 * Unit: ms.
1241 * Range: 0 to 30000
1242 )))
1243 |(% style="width:173px" %)Retry time|(% style="width:122px" %)HSW10079|(% colspan="2" style="width:506px" %)(((
1244 * Unit: times.
1245 * Range: 0 to 100
1246 )))
1247 |(% style="width:173px" %)Retry timeout|(% style="width:122px" %)HSW10080|(% colspan="2" style="width:506px" %)(((
1248 * Unit: s.
1249 * Range: 0 to 30
1250 )))
1251 |(% style="width:173px" %)HMI station number|(% style="width:122px" %)HSW10081|(% colspan="2" style="width:506px" %)
1252 |(% style="width:173px" %)PLC station number|(% style="width:122px" %)HSW10082|(% colspan="2" style="width:506px" %)
1253 |(% colspan="1" rowspan="11" style="width:102px" %)COM2-2|(% style="width:173px" %)Communication mode|(% style="width:122px" %)HSW10105|(% colspan="2" style="width:506px" %)(((
1254 * =0: RS232
1255 * =1: RS485
1256 )))
1257 |(% style="width:173px" %)Baud rate|(% style="width:122px" %)HSW10106|(% colspan="2" style="width:506px" %)(((
1258 * =0: 1200
1259 * =1: 2400
1260 * =2: 4800
1261 * =3: 9600
1262 * =4: 19200
1263 * =5: 38400
1264 * =6: 57600
1265 * =7: 115200
1266 * =8: 230400
1267 )))
1268 |(% style="width:173px" %)Data bit|(% style="width:122px" %)HSW10107|(% colspan="2" style="width:506px" %)(((
1269 * =7: 7 bit
1270 * =8: 8 bit
1271 )))
1272 |(% style="width:173px" %)Stop bit|(% style="width:122px" %)HSW10108|(% colspan="2" style="width:506px" %)(((
1273 * =1: 1 bit
1274 * =2: 2 bit
1275 )))
1276 |(% style="width:173px" %)Check bit|(% style="width:122px" %)HSW10109|(% colspan="2" style="width:506px" %)(((
1277 * =0: None
1278 * =1: ODD
1279 * =2: EVEN
1280 )))
1281 |(% style="width:173px" %)Wait timeout|(% style="width:122px" %)HSW10110|(% colspan="2" style="width:506px" %)(((
1282 * Unit: ms.
1283 * Range: 0 to 30000
1284 )))
1285 |(% style="width:173px" %)receive timeout|(% style="width:122px" %)HSW10111|(% colspan="2" style="width:506px" %)(((
1286 * Unit: ms.
1287 * Range: 0 to 30000
1288 )))
1289 |(% style="width:173px" %)Retry time|(% style="width:122px" %)HSW10112|(% colspan="2" style="width:506px" %)(((
1290 * Unit: times.
1291 * Range: 0 to 100
1292 )))
1293 |(% style="width:173px" %)Retry timeout|(% style="width:122px" %)HSW10113|(% colspan="2" style="width:506px" %)(((
1294 * Unit: s.
1295 * Range: 0 to 30
1296 )))
1297 |(% style="width:173px" %)HMI station number|(% style="width:122px" %)HSW10114|(% colspan="2" style="width:506px" %)
1298 |(% style="width:173px" %)PLC station number|(% style="width:122px" %)HSW10115|(% colspan="2" style="width:506px" %)
1299 |(% colspan="1" rowspan="11" style="width:102px" %)COM3|(% style="width:173px" %)Communication mode|(% style="width:122px" %)HSW10083|(% colspan="2" style="width:506px" %)(((
1300 * =1: RS485
1301 )))
1302 |(% style="width:173px" %)Baud rate|(% style="width:122px" %)HSW10084|(% colspan="2" style="width:506px" %)(((
1303 * =0: 1200
1304 * =1: 2400
1305 * =2: 4800
1306 * =3: 9600
1307 * =4: 19200
1308 * =5: 38400
1309 * =6: 57600
1310 * =7: 115200
1311 * =8: 230400
1312 )))
1313 |(% style="width:173px" %)Data bit|(% style="width:122px" %)HSW10085|(% colspan="2" style="width:506px" %)(((
1314 * =7: 7 bit
1315 * =8: 8 bit
1316 )))
1317 |(% style="width:173px" %)Stop bit|(% style="width:122px" %)HSW10086|(% colspan="2" style="width:506px" %)(((
1318 * =1: 1 bit
1319 * =2: 2 bit
1320 )))
1321 |(% style="width:173px" %)Check bit|(% style="width:122px" %)HSW10087|(% colspan="2" style="width:506px" %)(((
1322 * =0: None
1323 * =1: ODD
1324 * =2: EVEN
1325 )))
1326 |(% style="width:173px" %)Wait timeout|(% style="width:122px" %)HSW10088|(% colspan="2" style="width:506px" %)(((
1327 * Unit: ms.
1328 * Range: 0 to 30000
1329 )))
1330 |(% style="width:173px" %)receive timeout|(% style="width:122px" %)HSW10089|(% colspan="2" style="width:506px" %)(((
1331 * Unit: ms.
1332 * Range: 0 to 30000
1333 )))
1334 |(% style="width:173px" %)Retry time|(% style="width:122px" %)HSW10090|(% colspan="2" style="width:506px" %)(((
1335 * Unit: times.
1336 * Range: 0 to 100
1337 )))
1338 |(% style="width:173px" %)Retry timeout|(% style="width:122px" %)HSW10091|(% colspan="2" style="width:506px" %)(((
1339 * Unit: s.
1340 * Range: 0 to 30
1341 )))
1342 |(% style="width:173px" %)HMI station number|(% style="width:122px" %)HSW10092|(% colspan="2" style="width:506px" %)
1343 |(% style="width:173px" %)PLC station number|(% style="width:122px" %)HSW10093|(% colspan="2" style="width:506px" %)
1344 |(% colspan="1" rowspan="2" style="width:102px" %)CAN port|(% style="width:173px" %)CAN1 baud rate|(% style="width:122px" %)HSW010116|(% style="width:299px" %)(((
1345 Unit: K, the baud rate must be an integer.
1346
1347 For example, when the baud rate required is 250000, just enter 250.
1348 )))|(% colspan="1" rowspan="2" style="width:218px" %)**✎Note: **If baud rate has been modified,please wait 5 seconds,then restart the HMI to take effect.
1349 |(% style="width:173px" %)CAN2 baud rate|(% style="width:122px" %)HSW010117|(% style="width:299px" %)(((
1350 Unit: K, the baud rate must be an integer.
1351
1352 For example, when the baud rate required is 250000, just enter 250.
1353 )))
1354
1355 == Ethernet communication configuration ==
1356
1357 (% class="table-bordered" %)
1358 |(% style="width:40px" %)**No.**|(% style="width:295px" %)**Function**|(% style="width:220px" %)**Address**|(% style="width:336px" %)**Description**
1359 |(% rowspan="7" style="width:40px" %)1|(% colspan="1" rowspan="7" style="width:295px" %)Ethernet parameter configuration for communication number 1 in list. Configure those addresses according to connected device. After configuration, wait for 5 seconds and restart the HMI.|(% style="width:220px" %)HSW11004|(% style="width:336px" %)Device IP address high word 1
1360 |(% style="width:220px" %)HSW11005|(% style="width:336px" %)Device IP address high word 2
1361 |(% style="width:220px" %)HSW11006|(% style="width:336px" %)Device IP address high word 3
1362 |(% style="width:220px" %)HSW11007|(% style="width:336px" %)Device IP address high word 4
1363 |(% style="width:220px" %)HSW11008|(% style="width:336px" %)Device Port number
1364 |(% style="width:220px" %)HSW11009|(% style="width:336px" %)(((
1365 ~=2 TCP
1366
1367 ~=3 UDP
1368 )))
1369 |(% style="width:220px" %)HSW11010|(% style="width:336px" %)Reserved
1370 |(% rowspan="7" style="width:40px" %)2|(% colspan="1" rowspan="7" style="width:295px" %)Ethernet parameter configuration for communication number 2 in list. Configure those addresses according to connected device. After configuration, wait for 5 seconds and restart the HMI.|(% style="width:220px" %)HSW11011|(% style="width:336px" %)Device IP address high word 1
1371 |(% style="width:220px" %)HSW11012|(% style="width:336px" %)Device IP address high word 2
1372 |(% style="width:220px" %)HSW11013|(% style="width:336px" %)Device IP address high word 3
1373 |(% style="width:220px" %)HSW11014|(% style="width:336px" %)Device IP address high word 4
1374 |(% style="width:220px" %)HSW11015|(% style="width:336px" %)Device Port number
1375 |(% style="width:220px" %)HSW11016|(% style="width:336px" %)(((
1376 ~=2 TCP
1377
1378 ~=3 UDP
1379 )))
1380 |(% style="width:220px" %)HSW11017|(% style="width:336px" %)Reserved
1381 |(% style="width:40px" %)…|(% style="width:295px" %) |(% style="width:220px" %)…|(% style="width:336px" %)…
1382 |(% rowspan="7" style="width:40px" %)32|(% colspan="1" rowspan="7" style="width:295px" %)Ethernet parameter configuration for communication number 32 in list. Configure those addresses according to connected device. After configuration, wait for 5 seconds and restart the HMI.|(% style="width:220px" %)HSW11221|(% style="width:336px" %)Device IP address high word 1
1383 |(% style="width:220px" %)HSW11222|(% style="width:336px" %)Device IP address high word 2
1384 |(% style="width:220px" %)HSW11223|(% style="width:336px" %)Device IP address high word 3
1385 |(% style="width:220px" %)HSW11224|(% style="width:336px" %)Device IP address high word 4
1386 |(% style="width:220px" %)HSW11225|(% style="width:336px" %)Device Port number
1387 |(% style="width:220px" %)HSW11226|(% style="width:336px" %)(((
1388 ~=2 TCP;
1389
1390 ~=3 UDP
1391 )))
1392 |(% style="width:220px" %)HSW11227|(% style="width:336px" %)Reserved
1393
1394 (% class="box infomessage" %)
1395 (((
1396 **✎Note:** The number of Ethernet connections supported by different HMI series varies.
1397 )))
1398
1399 == Communication control ==
1400
1401 (% class="table-bordered" %)
1402 |=(% style="width: 135px;" %)**Communication No.**|=(% style="width: 102px;" %)**Station No.**|=(% style="width: 185px;" %)**Control bit**|=(% style="width: 191px;" %)**Communication lamp**|=(% style="width: 271px;" %)**Description**
1403 |(% colspan="1" rowspan="16" style="width:135px" %)1|(% style="width:102px" %)0~~15|(% style="width:185px" %)HSX550.0～HSX550.15|(% style="width:191px" %)HSX558.0～HSX558.15|(% rowspan="160" style="width:271px" %)Communication number refers to the number in "Communication Port Configuration". A number provides 256 device station numbers. Each station number corresponds to a communication control bit and a communication indicator bit. Registers HSX550.0 to HSX805.15 are used to control the station numbers from 0 to 127, and registers HSX1150.0 to HSX1405.15 are used to control station numbers 128 to 255.
1404 |(% style="width:102px" %)16~~31|(% style="width:185px" %)HSX551.0～HSX551.15|(% style="width:191px" %)HSX559.0～HSX559.15
1405 |(% style="width:102px" %)32~~47|(% style="width:185px" %)HSX552.0～HSX552.15|(% style="width:191px" %)HSX560.0～HSX560.15
1406 |(% style="width:102px" %)48~~63|(% style="width:185px" %)HSX553.0～HSX553.15|(% style="width:191px" %)HSX561.0～HSX561.15
1407 |(% style="width:102px" %)64～79|(% style="width:185px" %)HSX554.0～HSX554.15|(% style="width:191px" %)HSX562.0～HSX562.15
1408 |(% style="width:102px" %)80～95|(% style="width:185px" %)HSX555.0～HSX555.15|(% style="width:191px" %)HSX563.0～HSX563.15
1409 |(% style="width:102px" %)96～111|(% style="width:185px" %)HSX556.0～HSX556.15|(% style="width:191px" %)HSX564.0～HSX564.15
1410 |(% style="width:102px" %)112～127|(% style="width:185px" %)HSX557.0～HSX557.15|(% style="width:191px" %)HSX565.0～HSX565.15
1411 |(% style="width:102px" %)128～143|(% style="width:185px" %)HSX1150.0～HSX1150.15|(% style="width:191px" %)HSX1158.0～HSX1158.15
1412 |(% style="width:102px" %)144～159|(% style="width:185px" %)HSX1151.0～HSX1151.15|(% style="width:191px" %)HSX1159.0～HSX1159.15
1413 |(% style="width:102px" %)160～175|(% style="width:185px" %)HSX1152.0～HSX1152.15|(% style="width:191px" %)HSX1160.0～HSX1160.15
1414 |(% style="width:102px" %)176～191|(% style="width:185px" %)HSX1153.0～HSX1153.15|(% style="width:191px" %)HSX1161.0～HSX1161.15
1415 |(% style="width:102px" %)192～207|(% style="width:185px" %)HSX1154.0～HSX1154.15|(% style="width:191px" %)HSX1162.0～HSX1162.15
1416 |(% style="width:102px" %)208～223|(% style="width:185px" %)HSX1155.0～HSX1155.15|(% style="width:191px" %)HSX1163.0～HSX1163.15
1417 |(% style="width:102px" %)224～239|(% style="width:185px" %)HSX1156.0～HSX1156.15|(% style="width:191px" %)HSX1164.0～HSX1164.15
1418 |(% style="width:102px" %)240～255|(% style="width:185px" %)HSX1157.0～HSX1157.15|(% style="width:191px" %)HSX1165.0～HSX1165.15
1419 |(% colspan="1" rowspan="16" style="width:135px" %)2|(% style="width:102px" %)0～15|(% style="width:185px" %)HSX566.0～HSX566.15|(% style="width:191px" %)HSX574.0～HSX574.15
1420 |(% style="width:102px" %)16～31|(% style="width:185px" %)HSX567.0～HSX567.15|(% style="width:191px" %)HSX575.0～HSX575.15
1421 |(% style="width:102px" %)32～47|(% style="width:185px" %)HSX568.0～HSX568.15|(% style="width:191px" %)HSX576.0～HSX576.15
1422 |(% style="width:102px" %)48～63|(% style="width:185px" %)HSX569.0～HSX569.15|(% style="width:191px" %)HSX577.0～HSX577.15
1423 |(% style="width:102px" %)64～79|(% style="width:185px" %)HSX570.0～HSX570.15|(% style="width:191px" %)HSX578.0～HSX578.15
1424 |(% style="width:102px" %)80～95|(% style="width:185px" %)HSX571.0～HSX571.15|(% style="width:191px" %)HSX579.0～HSX579.15
1425 |(% style="width:102px" %)96～111|(% style="width:185px" %)HSX572.0～HSX572.15|(% style="width:191px" %)HSX580.0～HSX580.15
1426 |(% style="width:102px" %)112～127|(% style="width:185px" %)HSX573.0～HSX573.15|(% style="width:191px" %)HSX581.0～HSX581.15
1427 |(% style="width:102px" %)128～143|(% style="width:185px" %)HSX1166.0～HSX1166.15|(% style="width:191px" %)HSX1174.0～HSX1174.15
1428 |(% style="width:102px" %)144～159|(% style="width:185px" %)HSX1167.0～HSX1167.15|(% style="width:191px" %)HSX1175.0～HSX1175.15
1429 |(% style="width:102px" %)160～175|(% style="width:185px" %)HSX1168.0～HSX1168.15|(% style="width:191px" %)HSX1176.0～HSX1176.15
1430 |(% style="width:102px" %)176～191|(% style="width:185px" %)HSX1169.0～HSX1169.15|(% style="width:191px" %)HSX1177.0～HSX1177.15
1431 |(% style="width:102px" %)192～207|(% style="width:185px" %)HSX1170.0～HSX1170.15|(% style="width:191px" %)HSX1178.0～HSX1178.15
1432 |(% style="width:102px" %)208～223|(% style="width:185px" %)HSX1171.0～HSX1171.15|(% style="width:191px" %)HSX1179.0～HSX1179.15
1433 |(% style="width:102px" %)224～239|(% style="width:185px" %)HSX1172.0～HSX1172.15|(% style="width:191px" %)HSX1180.0～HSX1180.15
1434 |(% style="width:102px" %)240～255|(% style="width:185px" %)HSX1173.0～HSX1173.15|(% style="width:191px" %)HSX1181.0～HSX1181.15
1435 |(% colspan="1" rowspan="16" style="width:135px" %)3|(% style="width:102px" %)0～15|(% style="width:185px" %)HSX582.0～HSX582.15|(% style="width:191px" %)HSX590.0～HSX590.15
1436 |(% style="width:102px" %)16～31|(% style="width:185px" %)HSX583.0～HSX583.15|(% style="width:191px" %)HSX591.0～HSX591.15
1437 |(% style="width:102px" %)32～47|(% style="width:185px" %)HSX584.0～HSX584.15|(% style="width:191px" %)HSX592.0～HSX592.15
1438 |(% style="width:102px" %)48～63|(% style="width:185px" %)HSX585.0～HSX585.15|(% style="width:191px" %)HSX593.0～HSX593.15
1439 |(% style="width:102px" %)64～79|(% style="width:185px" %)HSX586.0～HSX586.15|(% style="width:191px" %)HSX594.0～HSX594.15
1440 |(% style="width:102px" %)80～95|(% style="width:185px" %)HSX587.0～HSX587.15|(% style="width:191px" %)HSX595.0～HSX595.15
1441 |(% style="width:102px" %)96～111|(% style="width:185px" %)HSX588.0～HSX588.15|(% style="width:191px" %)HSX596.0～HSX596.15
1442 |(% style="width:102px" %)112～127|(% style="width:185px" %)HSX589.0～HSX589.15|(% style="width:191px" %)HSX597.0～HSX597.15
1443 |(% style="width:102px" %)128～143|(% style="width:185px" %)HSX1182.0～HSX1182.15|(% style="width:191px" %)HSX1190.0～HSX1190.15
1444 |(% style="width:102px" %)144～159|(% style="width:185px" %)HSX1183.0～HSX1183.15|(% style="width:191px" %)HSX1191.0～HSX1191.15
1445 |(% style="width:102px" %)160～175|(% style="width:185px" %)HSX1184.0～HSX1184.15|(% style="width:191px" %)HSX1192.0～HSX1192.15
1446 |(% style="width:102px" %)176～191|(% style="width:185px" %)HSX1185.0～HSX1185.15|(% style="width:191px" %)HSX1193.0～HSX1193.15
1447 |(% style="width:102px" %)192～207|(% style="width:185px" %)HSX1186.0～HSX1186.15|(% style="width:191px" %)HSX1194.0～HSX1194.15
1448 |(% style="width:102px" %)208～223|(% style="width:185px" %)HSX1187.0～HSX1187.15|(% style="width:191px" %)HSX1195.0～HSX1195.15
1449 |(% style="width:102px" %)224～239|(% style="width:185px" %)HSX1188.0～HSX1188.15|(% style="width:191px" %)HSX1196.0～HSX1196.15
1450 |(% style="width:102px" %)240～255|(% style="width:185px" %)HSX1189.0～HSX1189.15|(% style="width:191px" %)HSX1197.0～HSX1197.15
1451 |(% colspan="1" rowspan="16" style="width:135px" %)4|(% style="width:102px" %)0～15|(% style="width:185px" %)HSX598.0～HSX598.15|(% style="width:191px" %)HSX606.0～HSX606.15
1452 |(% style="width:102px" %)16～31|(% style="width:185px" %)HSX599.0～HSX599.15|(% style="width:191px" %)HSX607.0～HSX607.15
1453 |(% style="width:102px" %)32～47|(% style="width:185px" %)HSX600.0～HSX600.15|(% style="width:191px" %)HSX608.0～HSX608.15
1454 |(% style="width:102px" %)48～63|(% style="width:185px" %)HSX601.0～HSX601.15|(% style="width:191px" %)HSX609.0～HSX609.15
1455 |(% style="width:102px" %)64～79|(% style="width:185px" %)HSX602.0～HSX602.15|(% style="width:191px" %)HSX610.0～HSX610.15
1456 |(% style="width:102px" %)80～95|(% style="width:185px" %)HSX603.0～HSX603.15|(% style="width:191px" %)HSX611.0～HSX611.15
1457 |(% style="width:102px" %)96～111|(% style="width:185px" %)HSX604.0～HSX604.15|(% style="width:191px" %)HSX612.0～HSX612.15
1458 |(% style="width:102px" %)112～127|(% style="width:185px" %)HSX605.0～HSX605.15|(% style="width:191px" %)HSX613.0～HSX613.15
1459 |(% style="width:102px" %)128～143|(% style="width:185px" %)HSX1198.0～HSX1198.15|(% style="width:191px" %)HSX1206.0～HSX1206.15
1460 |(% style="width:102px" %)144～159|(% style="width:185px" %)HSX1199.0～HSX1199.15|(% style="width:191px" %)HSX1207.0～HSX1207.15
1461 |(% style="width:102px" %)160～175|(% style="width:185px" %)HSX1200.0～HSX1200.15|(% style="width:191px" %)HSX1208.0～HSX1208.15
1462 |(% style="width:102px" %)176～191|(% style="width:185px" %)HSX1201.0～HSX1201.15|(% style="width:191px" %)HSX1209.0～HSX1209.15
1463 |(% style="width:102px" %)192～207|(% style="width:185px" %)HSX1202.0～HSX1202.15|(% style="width:191px" %)HSX1210.0～HSX1210.15
1464 |(% style="width:102px" %)208～223|(% style="width:185px" %)HSX1203.0～HSX1203.15|(% style="width:191px" %)HSX1211.0～HSX1211.15
1465 |(% style="width:102px" %)224～239|(% style="width:185px" %)HSX1204.0～HSX1204.15|(% style="width:191px" %)HSX1212.0～HSX1212.15
1466 |(% style="width:102px" %)240～255|(% style="width:185px" %)HSX1205.0～HSX1205.15|(% style="width:191px" %)HSX1213.0～HSX1213.15
1467 |(% colspan="1" rowspan="16" style="width:135px" %)5|(% style="width:102px" %)0～15|(% style="width:185px" %)HSX614.0～HSX614.15|(% style="width:191px" %)HSX622.0～HSX622.15
1468 |(% style="width:102px" %)16～31|(% style="width:185px" %)HSX615.0～HSX615.15|(% style="width:191px" %)HSX623.0～HSX623.15
1469 |(% style="width:102px" %)32～47|(% style="width:185px" %)HSX616.0～HSX616.15|(% style="width:191px" %)HSX624.0～HSX624.15
1470 |(% style="width:102px" %)48～63|(% style="width:185px" %)HSX617.0～HSX617.15|(% style="width:191px" %)HSX625.0～HSX625.15
1471 |(% style="width:102px" %)64～79|(% style="width:185px" %)HSX618.0～HSX618.15|(% style="width:191px" %)HSX626.0～HSX626.15
1472 |(% style="width:102px" %)80～95|(% style="width:185px" %)HSX619.0～HSX619.15|(% style="width:191px" %)HSX627.0～HSX627.15
1473 |(% style="width:102px" %)96～111|(% style="width:185px" %)HSX620.0～HSX620.15|(% style="width:191px" %)HSX628.0～HSX628.15
1474 |(% style="width:102px" %)112～127|(% style="width:185px" %)HSX621.0～HSX621.15|(% style="width:191px" %)HSX629.0～HSX629.15
1475 |(% style="width:102px" %)128～143|(% style="width:185px" %)HSX1214.0～HSX1214.15|(% style="width:191px" %)HSX1222.0～HSX1222.15
1476 |(% style="width:102px" %)144～159|(% style="width:185px" %)HSX1215.0～HSX1215.15|(% style="width:191px" %)HSX1223.0～HSX1223.15
1477 |(% style="width:102px" %)160～175|(% style="width:185px" %)HSX1216.0～HSX1216.15|(% style="width:191px" %)HSX1224.0～HSX1224.15
1478 |(% style="width:102px" %)176～191|(% style="width:185px" %)HSX1217.0～HSX1217.15|(% style="width:191px" %)HSX1225.0～HSX1225.15
1479 |(% style="width:102px" %)192～207|(% style="width:185px" %)HSX1218.0～HSX1218.15|(% style="width:191px" %)HSX1226.0～HSX1226.15
1480 |(% style="width:102px" %)208～223|(% style="width:185px" %)HSX1219.0～HSX1219.15|(% style="width:191px" %)HSX1227.0～HSX1227.15
1481 |(% style="width:102px" %)224～239|(% style="width:185px" %)HSX1220.0～HSX1220.15|(% style="width:191px" %)HSX1228.0～HSX1228.15
1482 |(% style="width:102px" %)240～255|(% style="width:185px" %)HSX1221.0～HSX1221.15|(% style="width:191px" %)HSX1229.0～HSX1229.15
1483 |(% colspan="1" rowspan="16" style="width:135px" %)6|(% style="width:102px" %)0～15|(% style="width:185px" %)HSX630.0～HSX630.15|(% style="width:191px" %)HSX638.0～HSX638.15
1484 |(% style="width:102px" %)16～31|(% style="width:185px" %)HSX631.0～HSX631.15|(% style="width:191px" %)HSX639.0～HSX639.15
1485 |(% style="width:102px" %)32～47|(% style="width:185px" %)HSX632.0～HSX632.15|(% style="width:191px" %)HSX640.0～HSX640.15
1486 |(% style="width:102px" %)48～63|(% style="width:185px" %)HSX633.0～HSX633.15|(% style="width:191px" %)HSX641.0～HSX641.15
1487 |(% style="width:102px" %)64～79|(% style="width:185px" %)HSX634.0～HSX634.15|(% style="width:191px" %)HSX642.0～HSX642.15
1488 |(% style="width:102px" %)80～95|(% style="width:185px" %)HSX635.0～HSX635.15|(% style="width:191px" %)HSX643.0～HSX643.15
1489 |(% style="width:102px" %)96～111|(% style="width:185px" %)HSX636.0～HSX636.15|(% style="width:191px" %)HSX644.0～HSX644.15
1490 |(% style="width:102px" %)112～127|(% style="width:185px" %)HSX637.0～HSX637.15|(% style="width:191px" %)HSX645.0～HSX645.15
1491 |(% style="width:102px" %)128～143|(% style="width:185px" %)HSX1230.0～HSX1230.15|(% style="width:191px" %)HSX1238.0～HSX1238.15
1492 |(% style="width:102px" %)144～159|(% style="width:185px" %)HSX1231.0～HSX1231.15|(% style="width:191px" %)HSX1239.0～HSX1239.15
1493 |(% style="width:102px" %)160～175|(% style="width:185px" %)HSX1232.0～HSX1232.15|(% style="width:191px" %)HSX1240.0～HSX1240.15
1494 |(% style="width:102px" %)176～191|(% style="width:185px" %)HSX1233.0～HSX1233.15|(% style="width:191px" %)HSX1241.0～HSX1241.15
1495 |(% style="width:102px" %)192～207|(% style="width:185px" %)HSX1234.0～HSX1234.15|(% style="width:191px" %)HSX1242.0～HSX1242.15
1496 |(% style="width:102px" %)208～223|(% style="width:185px" %)HSX1235.0～HSX1235.15|(% style="width:191px" %)HSX1243.0～HSX1243.15
1497 |(% style="width:102px" %)224～239|(% style="width:185px" %)HSX1236.0～HSX1236.15|(% style="width:191px" %)HSX1244.0～HSX1244.15
1498 |(% style="width:102px" %)240～255|(% style="width:185px" %)HSX1237.0～HSX1237.15|(% style="width:191px" %)HSX1245.0～HSX1245.15
1499 |(% colspan="1" rowspan="16" style="width:135px" %)7|(% style="width:102px" %)0～15|(% style="width:185px" %)HSX646.0～HSX646.15|(% style="width:191px" %)HSX654.0～HSX654.15
1500 |(% style="width:102px" %)16～31|(% style="width:185px" %)HSX647.0～HSX647.15|(% style="width:191px" %)HSX655.0～HSX655.15
1501 |(% style="width:102px" %)32～47|(% style="width:185px" %)HSX648.0～HSX648.15|(% style="width:191px" %)HSX656.0～HSX656.15
1502 |(% style="width:102px" %)48～63|(% style="width:185px" %)HSX649.0～HSX649.15|(% style="width:191px" %)HSX657.0～HSX657.15
1503 |(% style="width:102px" %)64～79|(% style="width:185px" %)HSX650.0～HSX650.15|(% style="width:191px" %)HSX658.0～HSX658.15
1504 |(% style="width:102px" %)80～95|(% style="width:185px" %)HSX651.0～HSX651.15|(% style="width:191px" %)HSX659.0～HSX659.15
1505 |(% style="width:102px" %)96～111|(% style="width:185px" %)HSX652.0～HSX652.15|(% style="width:191px" %)HSX660.0～HSX660.15
1506 |(% style="width:102px" %)112～127|(% style="width:185px" %)HSX653.0～HSX653.15|(% style="width:191px" %)HSX661.0～HSX661.15
1507 |(% style="width:102px" %)128～143|(% style="width:185px" %)HSX1246.0～HSX1246.15|(% style="width:191px" %)HSX1254.0～HSX1254.15
1508 |(% style="width:102px" %)144～159|(% style="width:185px" %)HSX1247.0～HSX1247.15|(% style="width:191px" %)HSX1255.0～HSX1255.15
1509 |(% style="width:102px" %)160～175|(% style="width:185px" %)HSX1248.0～HSX1248.15|(% style="width:191px" %)HSX1256.0～HSX1256.15
1510 |(% style="width:102px" %)176～191|(% style="width:185px" %)HSX1249.0～HSX1249.15|(% style="width:191px" %)HSX1257.0～HSX1257.15
1511 |(% style="width:102px" %)192～207|(% style="width:185px" %)HSX1250.0～HSX1250.15|(% style="width:191px" %)HSX1258.0～HSX1258.15
1512 |(% style="width:102px" %)208～223|(% style="width:185px" %)HSX1251.0～HSX1251.15|(% style="width:191px" %)HSX1259.0～HSX1259.15
1513 |(% style="width:102px" %)224～239|(% style="width:185px" %)HSX1252.0～HSX1252.15|(% style="width:191px" %)HSX1260.0～HSX1260.15
1514 |(% style="width:102px" %)240～255|(% style="width:185px" %)HSX1253.0～HSX1253.15|(% style="width:191px" %)HSX1261.0～HSX1261.15
1515 |(% colspan="1" rowspan="16" style="width:135px" %)8|(% style="width:102px" %)0～15|(% style="width:185px" %)HSX662.0～HSX662.15|(% style="width:191px" %)HSX670.0～HSX670.15
1516 |(% style="width:102px" %)16～31|(% style="width:185px" %)HSX663.0～HSX663.15|(% style="width:191px" %)HSX671.0～HSX671.15
1517 |(% style="width:102px" %)32～47|(% style="width:185px" %)HSX664.0～HSX664.15|(% style="width:191px" %)HSX672.0～HSX672.15
1518 |(% style="width:102px" %)48～63|(% style="width:185px" %)HSX665.0～HSX665.15|(% style="width:191px" %)HSX673.0～HSX673.15
1519 |(% style="width:102px" %)64～79|(% style="width:185px" %)HSX666.0～HSX666.15|(% style="width:191px" %)HSX674.0～HSX674.15
1520 |(% style="width:102px" %)80～95|(% style="width:185px" %)HSX667.0～HSX667.15|(% style="width:191px" %)HSX675.0～HSX675.15
1521 |(% style="width:102px" %)96～111|(% style="width:185px" %)HSX668.0～HSX668.15|(% style="width:191px" %)HSX676.0～HSX676.15
1522 |(% style="width:102px" %)112～127|(% style="width:185px" %)HSX669.0～HSX669.15|(% style="width:191px" %)HSX677.0～HSX677.15
1523 |(% style="width:102px" %)128～143|(% style="width:185px" %)HSX1262.0～HSX1262.15|(% style="width:191px" %)HSX1270.0～HSX1270.15
1524 |(% style="width:102px" %)144～159|(% style="width:185px" %)HSX1263.0～HSX1263.15|(% style="width:191px" %)HSX1271.0～HSX1271.15
1525 |(% style="width:102px" %)160～175|(% style="width:185px" %)HSX1264.0～HSX1264.15|(% style="width:191px" %)HSX1272.0～HSX1272.15
1526 |(% style="width:102px" %)176～191|(% style="width:185px" %)HSX1265.0～HSX1265.15|(% style="width:191px" %)HSX1273.0～HSX1273.15
1527 |(% style="width:102px" %)192～207|(% style="width:185px" %)HSX1266.0～HSX1266.15|(% style="width:191px" %)HSX1274.0～HSX1274.15
1528 |(% style="width:102px" %)208～223|(% style="width:185px" %)HSX1267.0～HSX1267.15|(% style="width:191px" %)HSX1275.0～HSX1275.15
1529 |(% style="width:102px" %)224～239|(% style="width:185px" %)HSX1268.0～HSX1268.15|(% style="width:191px" %)HSX1276.0～HSX1276.15
1530 |(% style="width:102px" %)240～255|(% style="width:185px" %)HSX1269.0～HSX1269.15|(% style="width:191px" %)HSX1277.0～HSX1277.15
1531 |(% rowspan="4" style="width:135px" %)9|(% style="width:102px" %)0~~15|(% style="width:185px" %)HSX678.0~~678.15|(% style="width:191px" %)HSX686.0~~686.15
1532 |(% style="width:102px" %)16~~31|(% style="width:185px" %)HSX679.0~~679.15|(% style="width:191px" %)HSX687.0~~687.15
1533 |(% style="width:102px" %)32~~47|(% style="width:185px" %)HSX680.0~~680.15|(% style="width:191px" %)HSX688.0~~688.15
1534 |(% style="width:102px" %)48~~63|(% style="width:185px" %)HSX681.0~~681.15|(% style="width:191px" %)HSX689.0~~689.15
1535 |(% rowspan="4" style="width:135px" %)10|(% style="width:102px" %)0~~15|(% style="width:185px" %)HSX694.0~~694.15|(% style="width:191px" %)HSX702.0~~702.15
1536 |(% style="width:102px" %)16~~31|(% style="width:185px" %)HSX695.0~~695.15|(% style="width:191px" %)HSX703.0~~703.15
1537 |(% style="width:102px" %)32~~47|(% style="width:185px" %)HSX696.0~~696.15|(% style="width:191px" %)HSX704.0~~704.15
1538 |(% style="width:102px" %)48~~63|(% style="width:185px" %)HSX697.0~~697.15|(% style="width:191px" %)HSX705.0~~705.15
1539 |(% rowspan="4" style="width:135px" %)11|(% style="width:102px" %)0~~15|(% style="width:185px" %)HSX710.0~~710.15|(% style="width:191px" %)HSX718.0~~718.15
1540 |(% style="width:102px" %)16~~31|(% style="width:185px" %)HSX711.0~~711.15|(% style="width:191px" %)HSX719.0~~719.15
1541 |(% style="width:102px" %)32~~47|(% style="width:185px" %)HSX712.0~~712.15|(% style="width:191px" %)HSX720.0~~720.15
1542 |(% style="width:102px" %)48~~63|(% style="width:185px" %)HSX713.0~~713.15|(% style="width:191px" %)HSX721.0~~721.15
1543 |(% rowspan="4" style="width:135px" %)12|(% style="width:102px" %)0~~15|(% style="width:185px" %)HSX726.0~~726.15|(% style="width:191px" %)HSX734.0~~734.15
1544 |(% style="width:102px" %)16~~31|(% style="width:185px" %)HSX727.0~~727.15|(% style="width:191px" %)HSX735.0~~735.15
1545 |(% style="width:102px" %)32~~47|(% style="width:185px" %)HSX728.0~~728.15|(% style="width:191px" %)HSX736.0~~736.15
1546 |(% style="width:102px" %)48~~63|(% style="width:185px" %)HSX729.0~~729.15|(% style="width:191px" %)HSX737.0~~737.15
1547 |(% rowspan="4" style="width:135px" %)13|(% style="width:102px" %)0~~15|(% style="width:185px" %)HSX742.0~~742.15|(% style="width:191px" %)HSX750.0~~750.15
1548 |(% style="width:102px" %)16~~31|(% style="width:185px" %)HSX743.0~~743.15|(% style="width:191px" %)HSX751.0~~751.15
1549 |(% style="width:102px" %)32~~47|(% style="width:185px" %)HSX744.0~~744.15|(% style="width:191px" %)HSX752.0~~752.15
1550 |(% style="width:102px" %)48~~63|(% style="width:185px" %)HSX745.0~~745.15|(% style="width:191px" %)HSX753.0~~753.15
1551 |(% rowspan="4" style="width:135px" %)14|(% style="width:102px" %)0~~15|(% style="width:185px" %)HSX758.0~~758.15|(% style="width:191px" %)HSX766.0~~766.15
1552 |(% style="width:102px" %)16~~31|(% style="width:185px" %)HSX759.0~~759.15|(% style="width:191px" %)HSX767.0~~767.15
1553 |(% style="width:102px" %)32~~47|(% style="width:185px" %)HSX760.0~~760.15|(% style="width:191px" %)HSX768.0~~768.15
1554 |(% style="width:102px" %)48~~63|(% style="width:185px" %)HSX761.0~~761.15|(% style="width:191px" %)HSX769.0~~769.15
1555 |(% rowspan="4" style="width:135px" %)15|(% style="width:102px" %)0~~15|(% style="width:185px" %)HSX774.0~~774.15|(% style="width:191px" %)HSX782.0~~782.15
1556 |(% style="width:102px" %)16~~31|(% style="width:185px" %)HSX775.0~~775.15|(% style="width:191px" %)HSX783.0~~783.15
1557 |(% style="width:102px" %)32~~47|(% style="width:185px" %)HSX776.0~~776.15|(% style="width:191px" %)HSX784.0~~784.15
1558 |(% style="width:102px" %)48~~63|(% style="width:185px" %)HSX777.0~~777.15|(% style="width:191px" %)HSX785.0~~785.15
1559 |(% rowspan="4" style="width:135px" %)16|(% style="width:102px" %)0~~15|(% style="width:185px" %)HSX790.0~~790.15|(% style="width:191px" %)HSX798.0~~798.15
1560 |(% style="width:102px" %)16~~31|(% style="width:185px" %)HSX791.0~~791.15|(% style="width:191px" %)HSX799.0~~799.15
1561 |(% style="width:102px" %)32~~47|(% style="width:185px" %)HSX792.0~~792.15|(% style="width:191px" %)HSX800.0~~800.15
1562 |(% style="width:102px" %)48~~63|(% style="width:185px" %)HSX793.0~~793.15|(% style="width:191px" %)HSX801.0~~801.15