Skip to Content

Wiki source code of 13.HMI Internal Registers

Version 29.1 by Mora Zhou on 2023/10/27 16:33
Show last authors
1 = **Introduction** =
2
3 HMI provide four types of HMI address for user. You can use them as temporary variables of the program. The use is consistent with the way access to the PLC register. You could also reference through the address, PIStudio provides three types of such memory.
4
5 *HSW, HDW, HUW, HAW are word address, HSX, HDX, HUX, HAX are bit address.
6
7 * **System data area (HSW): **A special register defined by the system.
8 * **Data storage area (HDW/HDX): **Users store user data.
9 * **System data area (HUW): **A special register defined by the system.
10 * **System Data (HAW)**: System register used for power-off save.
11 * **Recipe index area (RPW): **System register used for recipe index.
12
13 HMI internal registers are divided into bit address and word address, which can be accessed in two ways (take HDW as an example).
14
15 * Access as word with the prefix "HDW".
16 ** HDW0 means the 1st word of system data area. HDW1 means the 2nd word of system data area.
17 * Access as bit with the prefix "HDX".  The number before "." i".  The number before Access in bit with the prefix "HD".  The number before Access in bit with the prefix "HDX". The number before "." indicates the number of the word. The number after "." indicates the bit number of the word.
18 ** HDX1020.12 means to access the system data area in bit mode, the specific location is the 13th bit of the 1020 word.
19
20 (% class="box infomessage" %)
21 (((
22 **✎Note:**
23
24 * Addresses in HDX are the bits from words in HDW, so be careful when using addresses. For example, HDX1020.12 is the 13th bit to access the 1020 word. The value of this bit is the same as that of the word accessed through HDW001020. The 13th bit of this word is actually the same bit as HDX1020.12.
25 * The address of the bit address HDX is with a decimal point while word addresses are integers.
26 )))
27
28 = Address ranges table =
29
30 (% style="text-align:center" %)
31 [[image:6.png]]
32
33 = **Data storage area (HDW/HDX)** =
34
35 It is used to save the temporary data of project.
36
37 1. Access as word, and serial number range is from HDW0 to HDW299999.
38 1. Access as bit, and serial number range is from HDX0.0 to HDX299999.15.
39
40 = **Power-down save area (HAW/HAX)** =
41
42 It is system registers used for power-off save.
43
44 1. Access as word, and serial number range is from HAW0 to HAW199999.
45 1. Access as bit, and serial number range is from HAX0.0 to HAX199999.15.
46
47 (% class="box infomessage" %)
48 (((
49 **✎Note:**
50
51 * HAW/HAX is power-down retention. The register of this type is able to save the data before the power-down.
52 * To avoid possible device failure, do not immediately power off and reboot when configuring the power-down save addre
53 )))
54
55 = **Recipe index area (RPW)** =
56
57 It is system recipe data power-off save register. The range is from RPW000000 to RPW990450.
58
59 **✎Note:**
60
61 * RPW is power-down retention. The register of this type is able to save the data before the power-down.
62 * To avoid possible device failure, do not immediately power off and reboot when configuring the power-down save addre
63
64 = **Single user data area (HUW/HUX)** =
65
66 It is used for system special registers (reserved by system).
67
68 1. Access as word, and serial number range is from HUW0 to HUW1599.
69 1. Access as bit, and serial number range is from HUX0.0 to HUX1599.15.
70
71 **✎Note:**
72
73 * HUW/HUX is a system special register, so please check the system special register list during use. Please use the address specified in the table and do not use the address which is not mentioned in the table.
74
75 (% class="table-bordered" %)
76 |=**Special register address**|=**Description**|=**Function**
77 |=HUW0|Screen switch|A single terminal controls the screen switching, and all terminals do not affect each other.
78 |=HUW110~~HUW119|(% rowspan="26" %)Addresses of the built-in keyboard|The T9 input method stores the selected seria number length
79 |=HUW120~~HUW129|The T9 input method stores the selected Chinese Pinyin length
80 |=HUW135|Input method: first input
81 |=HUW136|Button: T9 Chinese Pinyin page
82 |=HUW137|Button: T9 Chinese characters page
83 |=HUW138|Button: symbol
84 |=HUW139|Button: switch
85 |=HUW140|Button: Chinese characters 1
86 |=HUW142|Button: Chinese characters 2
87 |=HUW144|Button: Chinese characters 3
88 |=HUW146|Button: Chinese characters 4
89 |=HUW148|Button: Chinese characters 5
90 |=HUW150|Button: Chinese characters 6
91 |=HUW152|Button: Chinese characters 7
92 |=HUW154|Button: Chinese characters 8
93 |=HUW156|Button: Chinese characters 9
94 |=HUW158|Button: Chinese characters 10
95 |=HUW160~~HUW169|Button: Chinese Pinyin 1
96 |=HUW170~~HUW179|Button: Chinese Pinyin 2
97 |=HUW180~~HUW189|Button: Chinese Pinyin 3
98 |=HUW190~~HUW199|Button: Chinese Pinyin 4
99 |=HUW200~~HUW699|Input method cache length
100 |=HUW700~~HUW749|Minimum value of the input method
101 |=HUW750~~HUW799|Maximum value of the input method
102 |=HUW800|Case switching of the input method
103 |=HUW801~~HUW900|Input method format cache length
104 |=HUW1000|(% rowspan="12" %)Addresses of user permission|OK (Sign in)
105 |=HUW1001|Result of operation
106 |=HUW1002~~1005|Old password
107 |=HUW1006~~1009|New password
108 |=HUW1010~~1013|Confirm password
109 |=HUW1014~~1029|New user name
110 |=HUW1030~~1157|States information of user permission
111 |=HUW1158~~1335|User name (Only or drop-down list object)
112 |=HUW1336~~1345|User name description or note
113 |=HUW1347|Hidden function configurations
114 |=HUW1348|Permission settings
115 |=HUW1349|Current user name
116 |=HUW1382|User sign in way|(((
117 * 0: Select the user name from drop-down list object for signing in
118 * 1: Enter the user name in Character Input/Display object for signing in (HUW1014)
119 )))
120 |=HUW1400|Time interval from last operation|(((
121 Shows how long the touch screen has not been clicked, in seconds. 32-bit unsigned integer
122
123 **✎Note:** Clicking by different users will only clear the corresponding register of the currently operating terminal, and the registers on other terminals (such as mobile phones, computers) will not be cleared.
124 )))
125 |=HUW1402|Keyboard note|It saves the text information of the keyboard notes when clicking object(HUW1402-HUW1433)
126 |=HUW1436|Current object level|Indicate current object security level
127
128 = **Special data area (HSW/HSX)** =
129
130 It is used for system special registers (reserved by system).
131
132 1. Access as word, and serial number range is from HSW0 to HSW49999. (HSW10000 to HSW19999 are the power-off storage areas)
133 1. Access as bit, and serial number range is from HSX0.0 to HSX49999.15.
134
135 **✎Note:**
136
137 * HSW / HSX are a system special register, so please check the system special register list during use. Please use the address specified in the table and do not use the address which is not mentioned in the table.
138 * To avoid possible device failure, do not immediately power off and reboot when configuring the power-down save address.
139
140 (% class="table-bordered" style="width:1024px" %)
141 |=(% scope="row" style="width: 160px;" %)**Address**|=(% style="width: 282px;" %)**Function**|=(% style="width: 452px;" %)**Description**
142 |=(% style="width: 160px;" %)HSW0|(% style="width:282px" %)Language switch|(% style="width:452px" %)Multiple language could be set in the project, HMI support maximum 8 languages. (Power-down save supported)
143 |=(% style="width: 160px;" %)HSW1|(% style="width:282px" %)Beep frequency|(% style="width:452px" %)Frequency range: 0~~4000
144 |=(% style="width: 160px;" %)HSW2|(% style="width:282px" %)Beep volume|(% style="width:452px" %)Volume range: 0~~80
145 |=(% style="width: 160px;" %)HSW3|(% style="width:282px" %)Beep time|(% style="width:452px" %)Unit: ms
146 |=(% style="width: 160px;" %)HSW4|(% style="width:282px" %)Beep whether enable or not|(% style="width:452px" %)(((
147 * =0: Enable.
148 * =1: Disable.
149 )))
150 |=(% style="width: 160px;" %)HSW5|(% style="width:282px" %)(((
151 Alarm indicator
152 )))|(% style="width:452px" %)(((
153 * =0: Currently no alarm or all alarms have been off.
154 * =1: Currently alarm(s) still keep in on.
155 )))
156 |=(% style="width: 160px;" %)HSW6~~HSW7|(% style="width:282px" %)Number of alarms|(% style="width:452px" %)The number of alarm (it also includes the records of alarm confirmed)
157 |=(% style="width: 160px;" %)HSW8|(% style="width:282px" %)Number of unconfirmed history alarm|(% style="width:452px" %)The number of unconfirmed history alarm
158 |=(% style="width: 160px;" %)HSW9|(% style="width:282px" %)Time out prompt|(% style="width:452px" %)(((
159 * =0: Enable
160 * =1: Disable
161 )))
162 |=(% style="width: 160px;" %)HSW12|(% style="width:282px" %)Screen swicth|(% style="width:452px" %)(((
163 * = 0: Only HSW control the screen switch, and the sreens of all users will switch.
164 * = 1: Only HUW control the screen switch, and all users do not affect each other.
165 )))
166 |=(% style="width: 160px;" %)HSW13|(% style="width:282px" %)Screen switch register|(% style="width:452px" %)Equal to different values, the screen jumps to the corresponding screen number of the screen.
167 |=(% style="width: 160px;" %)HSW24|(% style="width:282px" %)Reboot HMI|=(% style="width: 452px;" %)1: Reboot
168 |=(% style="width: 160px;" %)HSW28|(% style="width:282px" %)Local time: year|(% style="width:452px" %)Range: 0~~9999 (system reserved)
169 |=(% style="width: 160px;" %)HSW29|(% style="width:282px" %)Local time: month|(% style="width:452px" %)Range: 01~~12 (system reserved)
170 |=(% style="width: 160px;" %)HSW30|(% style="width:282px" %)Local time: day|(% style="width:452px" %)Range: 01~~31 (system reserved)
171 |=(% style="width: 160px;" %)HSW31|(% style="width:282px" %)Local time: hour|(% style="width:452px" %)Range: 0~~23 (system reserved)
172 |=(% style="width: 160px;" %)HSW32|(% style="width:282px" %)Local time: minute|(% style="width:452px" %)Range: 0~~59 (system reserved)
173 |=(% style="width: 160px;" %)HSW33|(% style="width:282px" %)Local time: second|(% style="width:452px" %)Range: 0~~59 (system reserved)
174 |=(% style="width: 160px;" %)HSW34|(% style="width:282px" %)Local time: week|(% style="width:452px" %)(((
175 * =0: Sunday.
176 * =1: Monday.
177 * =2: Tuesday.
178 * =3: Wednesday.
179 * =4: Thursday.
180 * =5: Friday.
181 * =6: Saturday.
182 )))
183 |=(% style="width: 160px;" %)HSW134|(% style="width:282px" %)(((
184 Whether the Script is read through
185
186
187 )))|(% style="width:452px" %)(((
188 **✎Note:** If want to read-only or write-only, please enable this settings.
189
190 * =0: Read from HMI cache(Default)
191 * =1: Read from PLC directly
192 )))
193 |=(% style="width: 160px;" %)HSW135|(% style="width:282px" %)Confirm installment password|(% style="width:452px" %)Confirm button for installment password
194 |=(% style="width: 160px;" %)HSW151|(% style="width:282px" %)Installment due|(% style="width:452px" %)Number of days to installment due
195 |=(% style="width: 160px;" %)HSW185~~200|(% style="width:282px" %)Installment password|(% style="width:452px" %)Enter installment password
196 |=(% style="width: 160px;" %)HSW242|(% style="width:282px" %)(((
197 Prompt result of recipe operation
198
199 * Upload: Data is written from address to file
200 * Download: Data is written from a file to an address
201 )))|(% style="width:452px" %)(((
202 * =1: Download recipe, start
203 * =2: Download recipe, execution error
204 * =3: Download recipe, files don't exist
205 * =4: Download recipe, members don't exist
206 * =5: Download recipe, groups don't exist
207 * =6: Download recipe, success
208 * =7: Upload recipe, start
209 * =8: Upload recipe, execution error
210 * =9: Upload recipe, files don't exist
211 * =10: Upload recipe, members don't exist
212 * =11: Upload recipe, groups don't exist
213 * =12: Upload recipe, success
214 * =13: Insert recipe, start
215 * =14: Insert recipe, execution error
216 * =15: Insert recipe, files don't exist
217 * =16: Insert recipe, members don't exist
218 * =17: Insert recipe, groups don't exist
219 * =18: Insert recipe, success
220 * =19: Delete recipe, start
221 * =20: Delete recipe, execution error
222 * =21: Delete recipe, files don't exist
223 * =22: Delete recipe, members don't exist
224 * =23: Delete recipe, groups don't exist
225 * =24: Delete recipe, success
226 * =25: Delete and sort recipe, start
227 * =26: Delete recipe and sort, execution error
228 * =27: Delete recipe and sort, files don't exist
229 * =28: Delete recipe and sort, members don't exist
230 * =29: Delete recipe and sort, groups don't exist
231 * =30: Delete recipe and sort, success
232 * =37: CSV recipe files import successfully
233 * =38: CSV recipe files import failed.
234 )))
235 |=(% style="width: 160px;" %)HSW243|(% style="width:282px" %)Prompt result of recipe index|(% style="width:452px" %)(((
236 * =31: Recipe index, start
237 * =32: Recipe index, execution error
238 * =33: Recipe index, files don't exist
239 * =34: Recipe index, members don't exist
240 * =35: Recipe index, groups don't exist
241 * =36: Recipe index, success
242 )))
243 |=(% style="width: 160px;" %)HSW521|(% style="width:282px" %)Delete graph and alarm record|(% style="width:452px" %)(((
244 * =0: No operation
245 * =1: HSX521.0=1, delete all records.
246 * =2: HSX521.1=1, delete all trend graph.
247 * =4: HSX521.2=1, delete all alarms.
248 * =16: HSX521.4=1, delete history XY plot.
249 * =32: HSX521.5=1, delete data records in SD card or USB flash disk;(Please make a setting which is saved to USB flash disk or SD card in project setting).
250 * =64: HSX521.6=1, delete alarms records in SD card or USB flash disk; (Please make a setting which is saved to USB flash disk or SD card in project setting).
251 )))
252 |=(% style="width: 160px;" %)HSW522|(% style="width:282px" %)Copy and paste the alarm/data files in flash to the USB flash disk|(% style="width:452px" %)(((
253 * =0: No operation
254 * =1: HSX522.0=1, copy all record
255 * =2: HSX522.2=1, copy history XY trend graph
256 * =8: HSX522.3=1, copy alarm record
257 * =32: HSX522.5=1, copy recipe
258 )))
259 |=(% style="width: 160px;" %)HSW523|(% style="width:282px" %)Copy and paste the alarm/data files in flash to the SD card|(% style="width:452px" %)(((
260 * =0: No operation
261 * =1: HSX523.0=1, copy all record
262 * =4: HSX523.2=1, copy history XY trend graph
263 * =8: HSX523.3=1, copy alarm record
264 )))
265 |=(% style="width: 160px;" %)HSW524|(% style="width:282px" %)Copy and paste the alarm/data files in SD card to the USB flash disk|(% style="width:452px" %)(((
266 * =0: no operation
267 * =4: HSX524.2=1, copy history XY trend graph
268 * =8: HSX524.3=1, copy alarm record
269 * =16: HSX524.4=1, copy history alarm record
270 * =32: HSX524.5=1, copy data record
271 )))
272 |=(% style="width: 160px;" %)HSW525|(% style="width:282px" %)Copy and paste the alarm/data files in USB flash disk to SD card|(% style="width:452px" %)(((
273 * =0: no operation
274 * =4: HSX525.2=1, copy history XY trend graph
275 * =8: HSX525.3=1, copy alarm record
276 * =16: HSX525.4=1, copy history alarm record
277 * =32: HSX525.5= 1, copy data record
278 )))
279 |=(% style="width: 160px;" %)HSW526|(% style="width:282px" %)Delete file list|(% style="width:452px" %)(((
280 * =0: no operation
281 * =1: HSX526.0=1, delete designated file
282 * =2: HSX526.1=1, delete all files
283 )))
284 |=(% style="width: 160px;" %)HSW527|(% style="width:282px" %)Eject USB flash disk/SD card|(% style="width:452px" %)(((
285 * =0: No operation
286 * =1: Eject USB flash disk
287 * =2: Eject SD card
288 )))
289 |=(% style="width: 160px;" %)HSW528|(% style="width:282px" %)The state of USB flash disk|(% style="width:452px" %)(((
290 * =1: USB flash disk is detected
291 * =2: Ejecting USB flash disk, please waiting…
292 * =3: USB flash disk ejected
293 )))
294 |=(% style="width: 160px;" %)HSW529|(% style="width:282px" %)The state of SD card|(% style="width:452px" %)(((
295 * =1: SD card is detected
296 * =2: Ejecting SD card, please waiting…
297 * =3: SD card ejected
298 )))
299 |=(% style="width: 160px;" %)HSW550~~849|(% style="width:282px" %)Communication control|(% style="width:452px" %)For communication control and communication lamp (please refer to "[[communication control>>http://13.229.109.52:8080/wiki/pistudio/view/Helps/13.HMI%20internal%20registers/#HCommunicationcontrol]]" sector for detailed)
300 |=(% style="width: 160px;" %)HSW850|(% style="width:282px" %)(((
301 Network state
302
303 (4G, WIFI and Ethernet)
304 )))|(% style="width:452px" %)(((
305 In HMI V1.0
306
307 * =0: Network is disconnected.
308 * =1: only LAN connected, and APP can't access HMI.
309 * =2: WECON Cloud connected , APP and web could access HMI.
310
311 In HMI V2.0
312
313 * =0: Network is disconnected.
314 * =1: Network is connected.
315 )))
316 |=(% style="width: 160px;" %)HSW855|(% style="width:282px" %)Backlight Control|(% style="width:452px" %)(((
317 * HSX855.0=1: turn on the backlight and reset automatically after being triggered.
318 * HSX855.1=1: turn off the backlight and reset automatically after being triggered.
319 )))
320 |=(% style="width: 160px;" %)HSW856|(% style="width:282px" %)Whether to close the indirect screen when the current screen is switched to the other screen)|(% style="width:452px" %)(((
321 * =0: close the sub-screen, including the indirect screen;
322 * =1: not to close.
323 )))
324 |=(% style="width: 160px;" %)HSW857|(% style="width:282px" %)Permission in remote access (web page, mobile APP, cloud platform, etc.)|(% style="width:452px" %)(((
325 * =0: users could switch the screen, control the switch and update data in remote access.
326 * =1: users could only control function switch (only switch the screen), view data and switch state, but could not operate or update them.
327 * =2: users could neither operate the screen switch, nor switch operation and data modification, only view. (The ig series and 8000/9000 series with -R after system upgrade)
328 )))
329 |=(% style="width: 160px;" %)HSW860~~861|(% style="width:282px" %)Data partition remaining space|(% style="width:452px" %)Display the data partition remaining space, updated every minute, unit(**kB**)
330 |=(% style="width: 160px;" %)HSW880|(% style="width:282px" %)Enable data partition remaining space|(% style="width:452px" %)(((
331 ~=1, able to view the data partition remaining space from HSW860~~861.
332
333 ~=Other value except 1, disable the viewing function.
334 )))
335 |=(% style="width: 160px;" %)HSW881|(% style="width:282px" %)Storage of Record files|(% style="width:452px" %)(((
336 It is used for controlling saving alarm/data record files to U disk / SD card.
337
338 * = 0: Save to storage.
339 * = 1: Don't save to storage.
340 )))
341 |=(% style="width: 160px;" %)HSW882|(% style="width:282px" %)Storage device status|(% style="width:452px" %)(((
342 * HDX882.0=0 USB flash doesn't execute storage or storage finished.
343 * HDX882.0=1 USB flash is reading data, don't remove USB flash.
344 * HDX882.1=0 SD card doesn't execute storage or storage finished.
345 * HDX882.1=1 SD card is reading data, don't remove SD card.
346 )))
347 |=(% style="width: 160px;" %)HSW884|(% style="width:282px" %)Enter the system network configuration interface|(% style="width:452px" %)(((
348 * =0: Do not enter the network configuration interface
349 * =1: Enter the system network configuration interface.
350 ** ig series HMI only supports to enter the system interface
351
352 )))
353 |=(% style="width: 160px;" %)HSW885|(% style="width:282px" %)When the control object hides the address is read failed (communication failure), set the display mode of the object|(% style="width:452px" %)(((
354 * = 0: displayed by object setting.
355 * =1: control address read failure, the address control of all objects is hidden, not displayed.
356 * =2: control address read failure, the address control of all objects is displayed, not hidden.
357 )))
358 |=(% style="width: 160px;" %)HSW893|(% style="width:282px" %)(((
359 User Permission Control Address, same as HUW1000 feature, please refer to chapter "[[User Permission>>http://13.229.109.52:8080/wiki/pistudio/view/Helps/08.Basic%20Function/#HUserPermission]]"
360
361 **✎Note: **This address can only take effect when it is operated in the real HMI, and the operation is invalid on Web/App side.
362 )))|(% style="width:452px" %)(((
363 * =1: User Log in
364 * =2: Change User password
365 * =3: User Log out
366 * =4: New user
367 * =5: Delete user
368 * =6: Add user rights
369 * =8: Add Hide features
370 * =9: Delete Profile
371 * =10: Export Profile
372 * =11: Import profile
373 * =12: Export log file
374 * =13: Delete log file
375 )))
376 |=(% style="width: 160px;" %)HSW900|(% style="width:282px" %)Quick update frequency settings for objects|(% style="width:452px" %)(((
377 Valid when the object is enabled for "quick update". Default: 5.
378
379 Range: 1 (fastest) ~~ 50 (slowest)
380 )))
381 |=(% style="width: 160px;" %)HSW920|(% style="width:282px" %)Static mode Maximum periods|(% style="width:452px" %)Numeric Input/ Display (range: 0-12)
382 |=(% style="width: 160px;" %)HSW921 ~~ 924|(% style="width:282px" %)Static mode Admin key|(% style="width:452px" %)Character Input/ Display (length: 8)
383 |=(% style="width: 160px;" %)HSW925 ~~ 928|(% style="width:282px" %)1^^st^^ period key (Static mode)|(% style="width:452px" %)Character Input/ Display (length: 8)
384 |=(% style="width: 160px;" %)HSW929 ~~ 933|(% style="width:282px" %)1^^st^^ expiry time (Static mode)|(% style="width:452px" %)Numeric Input/ Display (YYYYMMDDHHMM)
385 |=(% style="width: 160px;" %)HSW935 ~~ 938|(% style="width:282px" %)2^^nd^^ period key (Static mode)|(% style="width:452px" %)Character Input/ Display (length: 8)
386 |=(% style="width: 160px;" %)HSW939 ~~ 943|(% style="width:282px" %)2^^nd ^^expiry time (Static mode)|(% style="width:452px" %)Numeric Input/ Display (YYYYMMDDHHMM)
387 |=(% style="width: 160px;" %)HSW945 ~~ 948|(% style="width:282px" %)3^^rd^^ period key (Static mode)|(% style="width:452px" %)Character Input/ Display (length: 8)
388 |=(% style="width: 160px;" %)HSW949 ~~ 953|(% style="width:282px" %)3^^rd ^^expiry time (Static mode)|(% style="width:452px" %)Numeric Input/ Display (YYYYMMDDHHMM)
389 |=(% style="width: 160px;" %)HSW955 ~~ 958|(% style="width:282px" %)4^^th^^ period key (Static mode)|(% style="width:452px" %)Character Input/ Display (length: 8)
390 |=(% style="width: 160px;" %)HSW959 ~~ 963|(% style="width:282px" %)4^^th ^^expiry time (Static mode)|(% style="width:452px" %)Numeric Input/ Display (YYYYMMDDHHMM)
391 |=(% style="width: 160px;" %)HSW965 ~~ 968|(% style="width:282px" %)5^^th^^ period key (Static mode)|(% style="width:452px" %)Character Input/ Display (length: 8)
392 |=(% style="width: 160px;" %)HSW969 ~~ 973|(% style="width:282px" %)5^^th ^^expiry time (Static mode)|(% style="width:452px" %)Numeric Input/ Display (YYYYMMDDHHMM)
393 |=(% style="width: 160px;" %)HSW975 ~~ 978|(% style="width:282px" %)6^^th^^ period key (Static mode)|(% style="width:452px" %)Character Input/ Display (length: 8)
394 |=(% style="width: 160px;" %)HSW979 ~~ 983|(% style="width:282px" %)6^^th ^^expiry time (Static mode)|(% style="width:452px" %)Numeric Input/ Display (YYYYMMDDHHMM)
395 |=(% style="width: 160px;" %)HSW985 ~~ 988|(% style="width:282px" %)7^^th^^ period key (Static mode)|(% style="width:452px" %)Character Input/ Display (length: 8)
396 |=(% style="width: 160px;" %)HSW989 ~~ 993|(% style="width:282px" %)7^^th ^^expiry time (Static mode)|(% style="width:452px" %)Numeric Input/ Display (YYYYMMDDHHMM)
397 |=(% style="width: 160px;" %)HSW995 ~~ 998|(% style="width:282px" %)8^^th^^ period key (Static mode)|(% style="width:452px" %)Character Input/ Display (length: 8)
398 |=(% style="width: 160px;" %)HSW999 ~~ 1003|(% style="width:282px" %)8^^th ^^expiry time (Static mode)|(% style="width:452px" %)Numeric Input/ Display (YYYYMMDDHHMM)
399 |=(% style="width: 160px;" %)HSW1005 ~~1008|(% style="width:282px" %)9^^th^^ period key (Static mode)|(% style="width:452px" %)Character Input/ Display (length: 8)
400 |=(% style="width: 160px;" %)HSW1009 ~~ 1013|(% style="width:282px" %)9^^th ^^expiry time (Static mode)|(% style="width:452px" %)Numeric Input/ Display (YYYYMMDDHHMM)
401 |=(% style="width: 160px;" %)HSW1015 ~~1018|(% style="width:282px" %)10^^th^^ period key (Static mode)|(% style="width:452px" %)Character Input/ Display (length: 8)
402 |=(% style="width: 160px;" %)HSW1019 ~~ 1023|(% style="width:282px" %)10^^th ^^expiry time (Static mode)|(% style="width:452px" %)Numeric Input/ Display (YYYYMMDDHHMM)
403 |=(% style="width: 160px;" %)HSW1025 ~~1028|(% style="width:282px" %)11^^th^^ period key (Static mode)|(% style="width:452px" %)Character Input/ Display (length: 8)
404 |=(% style="width: 160px;" %)HSW1029 ~~ 1033|(% style="width:282px" %)11^^th ^^expiry time (Static mode)|(% style="width:452px" %)Numeric Input/ Display (YYYYMMDDHHMM)
405 |=(% style="width: 160px;" %)HSW1035 ~~1038|(% style="width:282px" %)12^^th^^ period key (Static mode)|(% style="width:452px" %)Character Input/ Display (length: 8)
406 |=(% style="width: 160px;" %)HSW1039 ~~ 1043|(% style="width:282px" %)12^^th ^^expiry time (Static mode)|(% style="width:452px" %)Numeric Input/ Display (YYYYMMDDHHMM)
407 |=(% style="width: 160px;" %)HSW1046|(% style="width:282px" %)Current period (Static mode)|(% style="width:452px" %)Current period (Range 1-13)
408 |=(% style="width: 160px;" %)HSW1047|(% style="width:282px" %)Save settings (Static mode)|(% style="width:452px" %)(((
409 * HSX1047.0=1: Save static installment information
410 * HSX1047.1=1: Write installment information to registers
411 )))
412 |=(% style="width: 160px;" %)HSW1050~~HSW1065|(% style="width:282px" %)The recipe name that can input csv format|(% style="width:452px" %)Input CSV format recipe file name through "Character Input/ Display".(This function should be used in combination with the recipefunction)
413 |=(% style="width: 160px;" %)HSW1066|(% style="width:282px" %)Configure the type of the CSV file imported|(% style="width:452px" %)(((
414 The CSV file type imported (This function should be used in combination with the recipe function)
415
416 * =0: Import customed CSV file. The data in the file is valid.
417 * =1: Import ordinary recipe files of regular series HMI. The 1st row of the file is invalid.
418 * =2: Import special recipe files of regular series HMI. The 1st and 3nd rows and the 1st colume of the file is invalid.
419 )))
420 |=(% style="width: 160px;" %)HSW1067|(% style="width:282px" %)Location where the CSV file is saved|(% style="width:452px" %)(((
421 Set the path of CSV file (This function should be used in combination with the recipe function)
422
423 * =0: In the CsvFile directory of the USB stick
424 * =1: In the CsvFile directory of the SD card
425 )))
426 |=(% style="width: 160px;" %)HSW1070|(% style="width:282px" %)The time interval (seconds) since the last time the screen was clicked|(% style="width:452px" %)(((
427 Shows how long the current screen has not been clicked, using a decimal unsigned double word (Numeric Input/ Display).
428
429 **✎Note: **This register is cleared to zero regardless of which user clicks on the screen.
430 )))
431 |=(% style="width: 160px;" %)HSW1073|(% style="width:282px" %)Corresponding key value from keyboard|(% style="width:452px" %)Display the key value of the currently pressed key, the key value is shown in Table 1 (not updated when the character input display is being input)
432 |=(% style="width: 160px;" %)HSW1074|(% style="width:282px" %)Keyboard key status|(% style="width:452px" %)Display the current button status (not updated when the numeric input display is being input)(((
433 * =0: key release
434 * =1: key press
435 * =2: Long press the button
436 )))
437 |=(% style="width: 160px;" %)HSW1075|(% style="width:282px" %)Cursor speed|(% style="width:452px" %)Control the cursor movement speed, the range is 0～100, the default is 20
438 |=(% style="width: 160px;" %)HSW1076|(% style="width:282px" %)Cursor x coordinate value|(% style="width:452px" %)Record the x value at the current position of the cursor, range: 0 to screen width -1
439 |=(% style="width: 160px;" %)HSW1077|(% style="width:282px" %)Cursor y coordinate value|(% style="width:452px" %)Record the y value at the current position of the cursor, range: 0 to screen height-1
440 |=(% style="width: 160px;" %)HSW1078|(% style="width:282px" %)Corresponding ASCII code for keyboard keys|(% style="width:452px" %)Only the ASCII value of letters, numbers, and symbols are displayed, and the ASCII value of the function button is not displayed.
441 |=(% style="width: 160px;" %)HSW1079|(% style="width:282px" %)Trigger to set the cursor position and set the Enter key mode|(% style="width:452px" %)(((
442 * HSX1079.0=1: Set the cursor position according to the cursor xy register value;
443 * HSX1079.1=0: When the numeric/character input display is being input, press Enter to end the input, no value/text part is being input, Enter is a normal click;
444 * HSX1079.1=1 Regardless of whether the numeric/character component is inputting the Enter key, only normal click is performed, and the keyboard end input is not performed.
445 )))
446 |=(% style="width: 160px;" %)HSW1083|(% style="width:282px" %)Naming method for printing object screenshots|(% style="width:452px" %)(((
447 Example: The time is 2019-01-04 14:29:10 (523 milliseconds), the screen number is 0, and the object ID is 2.
448
449 * =0: Use year, month, day, hour, minute, second, millisecond, screen number, part number to name, such as: 2019010414291052302.bmp.
450 * =1: Name using year, month, day, hour, minute, and second.
451
452 For example: 20190104142910.bmp.
453 )))
454 |=(% style="width: 160px;" %)HSW1086|(% style="width:282px" %)Control address mapping polling cycle, unit: ms|(% style="width:452px" %)(((
455 Address mapping polling cycle, effective range: 40~~1000ms, default: 300ms.
456
457 * When the set value is greater than 1000, the value is 1000.
458 * When the set value is lower than 40, it changes to the default value 300
459 )))
460 |=(% style="width: 160px;" %)HSW1087|(% style="width:282px" %)Control write interval in address mapping|(% style="width:452px" %)(((
461 After reading data to the device for N times, Perform an address mapping write operation. N is the interval value. The effective range: 0~~5, and default is 2.
462
463 When N more than 5, it is 5.
464
465 0 is the fastest and 5 is the slowest.
466 )))
467 |=(% style="width: 160px;" %)HSW1088|(% style="width:282px" %)Control the write interval of script|(% style="width:452px" %)(((
468 After reading data to the device for N times, Perform a script write operation. N is the interval value. The effective range: 0~~5, and default is 2.
469
470 When N more than 5, it is 5.
471
472 0 is the fastest and 5 is the slowest.
473 )))
474 |=(% style="width: 160px;" %)HSW1089|(% style="width:282px" %)Control interval of read through|(% style="width:452px" %)(((
475 After reading data to the device for N times, Perform a read through operation. N is the interval value. The effective range: 0~~5, and default is 2.
476
477 When N more than 5, it is 5.
478
479 0 is the fastest and 5 is the slowest.
480 )))
481 |=(% style="width: 160px;" %)HSW1100|(% colspan="1" rowspan="4" style="width:282px" %)Set the Master IP for Multi-link|(% style="width:452px" %)High word 1 for Master IP address of multi-link
482 |=(% style="width: 160px;" %)HSW1101|(% style="width:452px" %)High word 2 for Master IP address of multi-link
483 |=(% style="width: 160px;" %)HSW1102|(% style="width:452px" %)High word 3 for Master IP address of multi-link
484 |=(% style="width: 160px;" %)HSW1103|(% style="width:452px" %)High word 4 for Master IP address of multi-link
485 |=(% style="width: 160px;" %)HSW1104|(% style="width:282px" %)Control connection to Master or not for Multi-link slave device|(% style="width:452px" %)(((
486 * =1: Connect to the Master
487 * =0: Do not connect to Master
488 )))
489 |=(% style="width: 160px;" %)HSW1141|(% style="width:282px" %)Release alarm|(% style="width:452px" %)(((
490 * =0, Default value
491 * =1, Release the alarm generated before the last power-down when starting up
492 )))
493 |=(% style="width: 160px;" %)HSW1200|(% colspan="1" rowspan="2" style="width:282px" %)TSAP settings for HMI in the Siemens LOGO! 8 protocol(ig series or HMI V2.0)|(% style="width:452px" %)HMI local TSAP, which corresponds to the remote TSAP of PLC
494 |=(% style="width: 160px;" %)HSW1201|(% style="width:452px" %)HMI remote TSAP, which corresponds to the local TSAP of PLC
495 |=(% style="width: 160px;" %)HSW1450|(% style="width:282px" %)Enable objects level password function|(% style="width:452px" %)(((
496 * =0, Disable
497 * =1, Enable
498 )))
499 |=(% style="width: 160px;" %)HSW1451|(% style="width:282px" %)Whether the object level passwords are independent of each other|(% style="width:452px" %)(((
500 * =0, No, high-level passwords can unlock low-level
501 * = 1, Yes, high-level passwords cannot unlock low-level
502 )))
503 |=(% style="width: 160px;" %)HSW1452|(% style="width:282px" %)Initialization level|(% style="width:452px" %)Initialization level while HMI running
504 |=(% style="width: 160px;" %)HSW1454~~1457|(% style="width:282px" %)Password for Level 1|(% style="width:452px" %)(((
505 Display password for level 1, using character input object, up to 8 characters (numbers, letters (case sensitive))
506 )))
507 |=(% style="width: 160px;" %)HSW1458~~1461|(% style="width:282px" %)Password for Level 2|(% style="width:452px" %)Display password for level 2, using character input object, up to 8 characters (numbers, letters (case sensitive))
508 |=(% style="width: 160px;" %)HSW1462~~1465|(% style="width:282px" %)Password for Level 3|(% style="width:452px" %)Display password for level 3, using character input object, up to 8 characters (numbers, letters (case sensitive))
509 |=(% style="width: 160px;" %)HSW1466~~1469|(% style="width:282px" %)Password for Level 4|(% style="width:452px" %)Display password for level 4, using character input object, up to 8 characters (numbers, letters (case sensitive))
510 |=(% style="width: 160px;" %)HSW1470~~1473|(% style="width:282px" %)Password for Level 5|(% style="width:452px" %)Display password for level 5, using character input object, up to 8 characters (numbers, letters (case sensitive))
511 |=(% style="width: 160px;" %)HSW1474~~1477|(% style="width:282px" %)Password for Level 6|(% style="width:452px" %)Display password for level 6, using character input object, up to 8 characters (numbers, letters (case sensitive))
512 |=(% style="width: 160px;" %)HSW1478~~1481|(% style="width:282px" %)Password for Level 7|(% style="width:452px" %)Display password for level 7, using character input object, up to 8 characters (numbers, letters (case sensitive))
513 |=(% style="width: 160px;" %)HSW1482~~1485|(% style="width:282px" %)Password for Level 8|(% style="width:452px" %)Display password for level 8, using character input object, up to 8 characters (numbers, letters (case sensitive))
514 |=(% style="width: 160px;" %)HSW1486~~1489|(% style="width:282px" %)Password for Level 9|(% style="width:452px" %)Display password for level 9, using character input object, up to 8 characters (numbers, letters (case sensitive))
515 |=(% style="width: 160px;" %)HSW1490~~1493|(% style="width:282px" %)Password for Level 10|(% style="width:452px" %)Display password for level 10, using character input object, up to 8 characters (numbers, letters (case sensitive))
516 |=(% style="width: 160px;" %)HSW1494~~1497|(% style="width:282px" %)Password for Level 11|(% style="width:452px" %)Display password for level 11, using character input object, up to 8 characters (numbers, letters (case sensitive))
517 |=(% style="width: 160px;" %)HSW1498~~1501|(% style="width:282px" %)Password for Level 12|(% style="width:452px" %)Display password for level 12, using character input object, up to 8 characters (numbers, letters (case sensitive))
518 |=(% style="width: 160px;" %)HSW1502|(% style="width:282px" %)Modify password for object level|(% style="width:452px" %)(((
519 * HSX1502.0=1: Modification comfirmed. Save the data of HSW1450~~HSW1501 to a file for immediate effect.
520 * HSX1502.1=1:Modification cancelled. Restore the current data of hSW1450-HSW1501 to the data saved in the file last time.
521 )))
522 |=(% style="width: 160px;" %)HSW1509|(% style="width:282px" %)Curve width|(% style="width:452px" %)(((
523 * =0: Use the curve width set by project default.
524 * =1 to 10: use special register to set curve width.
525 )))
526 |=(% style="width: 160px;" %)HSW1603|(% style="width:282px" %)Number of current unreleased alarms|(% style="width:452px" %)The number of current unreleased alarms in alarm record file.
527 |=(% style="width: 160px;" %)HSW1604|(% style="width:282px" %)The auxiliary judgment address when the control bit in the Object Lock fails to be read|(% style="width:452px" %)(((
528 * =0: The auxiliary address is invalid.
529 * =1: When the communication fails, lock the object.
530 * =2: When the communication fails, unlock the object.
531 * =Others: The auxiliary address is invalid.
532 )))
533 |=(% style="width: 160px;" %)HSW1605|(% style="width:282px" %)BCD format natural decimal control|(% style="width:452px" %)(((
534 Whether to display natural decimals with decimal point in BCD format:
535
536 * 0=Not enabled.
537 * 1=Enable.
538
539 (For example, 56.20 is displayed as 56.2, 33.00 is displayed as 33)
540 )))
541 |=(% style="width: 160px;" %)HSW1606|(% style="width:282px" %)User permission modification control|(% style="width:452px" %)(((
542 * =0: Ordinary users are allowed to modify permissions and other operations
543 * =1: Only the administrator can operate (default is 0)
544 )))
545 |=(% style="width: 160px;" %)HSW1607|(% style="width:282px" %)The spacing value among the drop-down items of the drop-down list|(% style="width:452px" %)10 to 50 is effective, such as: 23 is 2.3 times the height of the object.
546 |=(% style="width: 160px;" %)HSW1611|(% style="width:282px" %)(((
547 Traditional recipe transfer
548 )))|(% style="width:452px" %)(((
549 * =1: download traditional recipe.
550 * =2: upload the traditional recipe.
551 )))
552 |=(% style="width: 160px;" %)HSW1612|(% style="width:282px" %)Traditional Recipe group number|(% style="width:452px" %)Traditional Recipe group number
553 |=(% style="width: 160px;" %)HSW1613|(% style="width:282px" %)Display the status of network card|(% style="width:452px" %)(((
554 * =1: Normal
555 * =Others: Abnormal
556 )))
557 |=(% style="width: 160px;" %)HSW1614~~1623|(% style="width:282px" %)Download speed per second|(% style="width:452px" %)Display the download speed per second. (The value is string)
558 |=(% style="width: 160px;" %)HSW1624~~1633|(% style="width:282px" %)Upnload speed per second|(% style="width:452px" %)Display the upload speed per second. (The value is string)
559 |=(% style="width: 160px;" %)HSW1634~~1643|(% style="width:282px" %)Flow consumption rate|(% style="width:452px" %)Display the total flow rate per second (The value is string)
560 |=(% style="width: 160px;" %)HSW1644~~1653|(% style="width:282px" %)Download flow consumption after power on|(% style="width:452px" %)Display the download flow consumption after power on (The value is string)
561 |=(% style="width: 160px;" %)HSW1654~~1663|(% style="width:282px" %)Upload flow consumption after power on|(% style="width:452px" %)Display the upload flow consumption after power on (The value is string)
562 |=(% style="width: 160px;" %)HSW1664~~1673|(% style="width:282px" %)Total flow consumption after power on|(% style="width:452px" %)Display the total flow consumption after power on (download and upload). (The value is string)
563 |=(% style="width: 160px;" %)HSW1674~~1683|(% style="width:282px" %)Historical flow consumption|(% style="width:452px" %)Display historical flow consumption (download and upload). (The value is string)
564 |=(% style="width: 160px;" %)HSW1684~~1693|(% style="width:282px" %)Flow consumption in 10 minutes|(% style="width:452px" %)Flow consumption in 10 minutes (download and upload). (The value is string)
565 |=(% style="width: 160px;" %)HSW1694~~1703|(% style="width:282px" %)Flow consumption in 30 minutes|(% style="width:452px" %)Flow consumption in 30 minutes (download and upload). (The value is string)
566 |=(% style="width: 160px;" %)HSW1704~~1713|(% style="width:282px" %)Flow consumption in 3 hours|(% style="width:452px" %)Flow consumption in 3 hours (download and upload). (The value is string)
567 |=(% style="width: 160px;" %)HSW1715|(% style="width:282px" %)Reset flow|(% style="width:452px" %)(((
568 * =1: Clear historical flow data and restart the count.
569 * =Others: Invalid
570 )))
571 |=(% style="width: 160px;" %)HSW1719|(% style="width:282px" %)Network status of Ethernet connnecting to server|(% style="width:452px" %)(((
572 * =0: Server connection exception
573 * =1: Server connection is OK
574 )))
575 |=(% style="width: 160px;" %)HSW1720|(% colspan="1" rowspan="12" style="width:282px" %)Related IP register in WIFI network status (It is valid when HMI is connected to WIFI)|(% style="width:452px" %)Local IP address high byte 1
576 |=(% style="width: 160px;" %)HSW1721|(% style="width:452px" %)Local IP address high byte 2
577 |=(% style="width: 160px;" %)HSW1722|(% style="width:452px" %)Local IP address high byte 3
578 |=(% style="width: 160px;" %)HSW1723|(% style="width:452px" %)Local IP address high byte 4
579 |=(% style="width: 160px;" %)HSW1724|(% style="width:452px" %)Local mask IP address high byte 1
580 |=(% style="width: 160px;" %)HSW1725|(% style="width:452px" %)Local mask IP address high byte 2
581 |=(% style="width: 160px;" %)HSW1726|(% style="width:452px" %)Local mask IP address high byte 3
582 |=(% style="width: 160px;" %)HSW1727|(% style="width:452px" %)Local mask IP address high byte 4
583 |=(% style="width: 160px;" %)HSW1728|(% style="width:452px" %)Local gateway IP address high byte 1
584 |=(% style="width: 160px;" %)HSW1729|(% style="width:452px" %)Local gateway IP address high byte 2
585 |=(% style="width: 160px;" %)HSW1730|(% style="width:452px" %)Local gateway IP address high byte 3
586 |=(% style="width: 160px;" %)HSW1731|(% style="width:452px" %)Local gateway IP address high byte 4
587 |=(% style="width: 160px;" %)HSW1733|(% colspan="1" rowspan="6" style="width:282px" %)(((
588 Display the MAC code of current WIFI
589
590 (display in hexadecimal)
591 )))|(% style="width:452px" %)Local MAC address high byte 1 (hexadecimal)
592 |=(% style="width: 160px;" %)HSW1734|(% style="width:452px" %)Local MAC address high byte 2 (hexadecimal)
593 |=(% style="width: 160px;" %)HSW1735|(% style="width:452px" %)Local MAC address high byte 3 (hexadecimal)
594 |=(% style="width: 160px;" %)HSW1736|(% style="width:452px" %)Local MAC address high byte 4 (hexadecimal)
595 |=(% style="width: 160px;" %)HSW1737|(% style="width:452px" %)Local MAC address high byte 5 (hexadecimal)
596 |=(% style="width: 160px;" %)HSW1738|(% style="width:452px" %)Local MAC address high byte 6 (hexadecimal)
597 |=(% style="width: 160px;" %)HSW1739|(% style="width:282px" %)Display the network status of WIFI|(% style="width:452px" %)(((
598 * =0: Server connection exception
599 * =1: Server connection is OK
600 )))
601 |=(% style="width: 160px;" %)HSW1740|(% style="width:282px" %)Wi-fi signal strength|(% style="width:452px" %)(((
602 Display the value of Wi-fi signal signal strength, ranges from 0~~100 (Signal strength is automatically obtained only once when HMI is powered on, and it will not be automatically updated. It needs to be used with the HSW1890)
603 )))
604 |=(% style="width: 160px;" %)HSW1741|(% colspan="1" rowspan="12" style="width:282px" %)Related IP register in 4Gnetwork status (It is valid when HMI is connected to 4G)|(% style="width:452px" %)Local IP address high byte 1
605 |=(% style="width: 160px;" %)HSW1742|(% style="width:452px" %)Local IP address high byte 2
606 |=(% style="width: 160px;" %)HSW1743|(% style="width:452px" %)Local IP address high byte 3
607 |=(% style="width: 160px;" %)HSW1744|(% style="width:452px" %)Local IP address high byte 4
608 |=(% style="width: 160px;" %)HSW1745|(% style="width:452px" %)Local mask IP address high byte 1
609 |=(% style="width: 160px;" %)HSW1746|(% style="width:452px" %)Local mask IP address high byte 2
610 |=(% style="width: 160px;" %)HSW1747|(% style="width:452px" %)Local mask IP address high byte 3
611 |=(% style="width: 160px;" %)HSW1748|(% style="width:452px" %)Local mask IP address high byte 4
612 |=(% style="width: 160px;" %)HSW1749|(% style="width:452px" %)Local gateway IP address high byte 1
613 |=(% style="width: 160px;" %)HSW1750|(% style="width:452px" %)Local gateway IP address high byte 2
614 |=(% style="width: 160px;" %)HSW1751|(% style="width:452px" %)Local gateway IP address high byte 3
615 |=(% style="width: 160px;" %)HSW1752|(% style="width:452px" %)Local gateway IP address high byte 4
616 |=(% style="width: 160px;" %)HSW1754|(% colspan="1" rowspan="6" style="width:282px" %)(((
617 Display the MAC code of current WIFI
618
619 (display in hexadecimal)
620 )))|(% style="width:452px" %)Local MAC address high byte 1 (hexadecimal)
621 |=(% style="width: 160px;" %)HSW1755|(% style="width:452px" %)Local MAC address high byte 2 (hexadecimal)
622 |=(% style="width: 160px;" %)HSW1756|(% style="width:452px" %)Local MAC address high byte 3 (hexadecimal)
623 |=(% style="width: 160px;" %)HSW1757|(% style="width:452px" %)Local MAC address high byte 4 (hexadecimal)
624 |=(% style="width: 160px;" %)HSW1758|(% style="width:452px" %)Local MAC address high byte 5 (hexadecimal)
625 |=(% style="width: 160px;" %)HSW1759|(% style="width:452px" %)Local MAC address high byte 6 (hexadecimal)
626 |=(% style="width: 160px;" %)HSW1760|(% style="width:282px" %)Display 4G network status|(% style="width:452px" %)(((
627 * =0: Server connection exception
628 * =1: Server connection is OK
629 )))
630 |=(% style="width: 160px;" %)HSW1761|(% style="width:282px" %)Display 4G network signal strength|(% style="width:452px" %)Signal strength: 0~~31. The greater the value ,the signal is stronger
631 |=(% style="width: 160px;" %)(((
632 HSW1762
633 )))|(% colspan="1" rowspan="13" style="width:282px" %)(((
634 Note: Valid when Ethernet2 of HMI is plugged into the network cable.
635 ①、When the Ethernet setting is enabled in the project parameters, this register displays the set value.
636 ②. When the Ethernet setting is not enabled in the engineering parameters, the register displays the Ethernet IP automatically acquired by the HMI.
637 ③. When the HMI is not plugged into the network cable, the register will show 0 whether the engineering parameters are set or not.
638 ④.IP related registers can be read and written (only static IP mode can be written).
639 )))|(% style="width:452px" %)(((
640 Ethernet2 Local IP address high byte 1
641 )))
642 |=(% style="width: 160px;" %)(((
643 HSW1763
644 )))|(% style="width:452px" %)(((
645 Ethernet2 Local IP address high byte 2
646 )))
647 |=(% style="width: 160px;" %)(((
648 HSW1764
649 )))|(% style="width:452px" %)(((
650 Ethernet2 Local IP address high byte 3
651 )))
652 |=(% style="width: 160px;" %)(((
653 HSW1765
654 )))|(% style="width:452px" %)(((
655 Ethernet2 Local IP address high byte 4
656 )))
657 |=(% style="width: 160px;" %)(((
658 HSW1766
659 )))|(% style="width:452px" %)(((
660 Ethernet2 Local mask IP address high byte 1
661 )))
662 |=(% style="width: 160px;" %)(((
663 HSW1767
664 )))|(% style="width:452px" %)(((
665 Ethernet2 Local mask IP address high byte 2
666 )))
667 |=(% style="width: 160px;" %)(((
668 HSW1768
669 )))|(% style="width:452px" %)Ethernet2 Local mask IP address high byte 3
670 |=(% style="width: 160px;" %)HSW1769|(% style="width:452px" %)Ethernet2 Local mask IP address high byte 4
671 |=(% style="width: 160px;" %)(((
672 HSW1770
673 )))|(% style="width:452px" %)(((
674 Ethernet2 Local gateway IP address high byte 1
675 )))
676 |=(% style="width: 160px;" %)(((
677 HSW1771
678 )))|(% style="width:452px" %)(((
679 Ethernet2 Local gateway IP address high byte 2
680 )))
681 |=(% style="width: 160px;" %)(((
682 HSW1772
683 )))|(% style="width:452px" %)(((
684 Ethernet2 Local gateway IP address high byte 3
685 )))
686 |=(% style="width: 160px;" %)(((
687 HSW1773
688 )))|(% style="width:452px" %)(((
689 Ethernet2 Local gateway IP address high byte 4
690 )))
691 |=(% style="width: 160px;" %)(((
692 HSW1774
693 )))|(% style="width:452px" %)(((
694 Ethernet2 Local Port Address
695 )))
696 |=(% style="width: 160px;" %)(((
697 HSW1775
698 )))|(% colspan="1" rowspan="6" style="width:282px" %)(((
699 ①Display the MAC code of Ethernet2 NIC
700
701 (hexadecimal display)
702
703 ②Read-only mode, not modifiable
704 )))|(% style="width:452px" %)(((
705 Ethernet2 Local MAC code high byte 1
706 )))
707 |=(% style="width: 160px;" %)(((
708 HSW1776
709 )))|(% style="width:452px" %)(((
710 Ethernet2 Local MAC code high byte 2
711 )))
712 |=(% style="width: 160px;" %)(((
713 HSW1777
714 )))|(% style="width:452px" %)(((
715 Ethernet2 Local MAC code high byte 3
716 )))
717 |=(% style="width: 160px;" %)(((
718 HSW1778
719 )))|(% style="width:452px" %)(((
720 Ethernet2 Local MAC code high byte 4
721 )))
722 |=(% style="width: 160px;" %)(((
723 HSW1779
724 )))|(% style="width:452px" %)(((
725 Ethernet2 Local MAC code high byte 5
726 )))
727 |=(% style="width: 160px;" %)(((
728 HSW1780
729 )))|(% style="width:452px" %)(((
730 Ethernet2 Local MAC code high byte 6
731 )))
732 |=(% style="width: 160px;" %)(((
733 HSW1781
734 )))|(% colspan="1" rowspan="8" style="width:282px" %)(((
735 ①Display and modify DNS1 and DNS2 of Ethernet2
736
737 ②Related registers can be read and written mode (only static IP mode can be written)
738 )))|(% style="width:452px" %)(((
739 Ethernet2 Local DNS1 address high byte 1
740 )))
741 |=(% style="width: 160px;" %)(((
742 HSW1782
743 )))|(% style="width:452px" %)(((
744 Ethernet2 Local DNS1 address high byte 2
745 )))
746 |=(% style="width: 160px;" %)(((
747 HSW1783
748 )))|(% style="width:452px" %)(((
749 Ethernet2 Local DNS1 address high byte 3
750 )))
751 |=(% style="width: 160px;" %)(((
752 HSW1784
753 )))|(% style="width:452px" %)(((
754 Ethernet2 Local DNS1 address high byte 4
755 )))
756 |=(% style="width: 160px;" %)(((
757 HSW1785
758 )))|(% style="width:452px" %)(((
759 Ethernet2 Local DNS2 address high byte 1
760 )))
761 |=(% style="width: 160px;" %)(((
762 HSW1786
763 )))|(% style="width:452px" %)(((
764 Ethernet2 Local DNS2 address high byte 2
765 )))
766 |=(% style="width: 160px;" %)(((
767 HSW1787
768 )))|(% style="width:452px" %)(((
769 Ethernet2 Local DNS2 address high byte 3
770 )))
771 |=(% style="width: 160px;" %)(((
772 HSW1788
773 )))|(% style="width:452px" %)(((
774 Ethernet2 Local DNS2 address high byte 4
775 )))
776 |=(% style="width: 160px;" %)(((
777 HSW1789
778 )))|(% colspan="1" style="width:282px" %)(((
779 Display or set the dynamic or static IP mode of Ethernet2
780 )))|(% style="width:452px" %)(((
781 HSX1789.0 = 0, Static IP mode
782
783 HSX1789.0 = 1, dynamic IP mode
784 )))
785 |=(% style="width: 160px;" %)(((
786 HSW1790
787 )))|(% colspan="1" style="width:282px" %)(((
788 Confirm Ethernet2 IP, subnet mask, gateway, DNS1, DNS2, and dynamic static IP settings
789 )))|(% style="width:452px" %)(((
790 ~= 1, confirm the setting (i.e., after modifying IP-related information, set this address to 1, representing confirmation of the modification, after which it will be reset to 0)
791 )))
792 |=(% style="width: 160px;" %)(((
793 HSW1791
794 )))|(% colspan="1" style="width:282px" %)(((
795 Network status of the Ethernet2 connection server
796 )))|(% style="width:452px" %)(((
797 ~= 0, connection to the server is abnormal = 1, connection to the server is normal
798 )))
799 |=(% style="width: 160px;" %)HSW1852|(% style="width:282px" %)Control the interval in two consecutive clicks|(% style="width:452px" %)Limit range: 1~~500ms. The default is 100 ms.
800 |=(% style="width: 160px;" %)HSW1853|(% style="width:282px" %)File format for exporting data records to USB flash drive or SD card|(% style="width:452px" %)(((
801 * =0: db database
802 * =1: CSV
803
804 (Only valid for script function DbToCsvFile)
805 )))
806 |=(% style="width: 160px;" %)HSW1854|(% style="width:282px" %)High and low word conversion type|(% style="width:452px" %)(((
807 * =0: use the old high-low word conversion (default)
808 * =1: usie the new high-low word conversion
809 )))
810 |=(% style="width: 160px;" %)HSW1855|(% style="width:282px" %)Screen Lock prompt display control|(% style="width:452px" %)(((
811 Control whether the screen lock prompt is displayed,
812
813 * =0: display(default value)
814 * =Other: no display.
815 )))
816 |=(% style="width: 160px;" %)HSW1856|(% style="width:282px" %)Display map fence drawing status|(% style="width:452px" %)(((
817 * =0: no map fence
818 * =1: The map fence is drawn and the device is inside the fence
819 * =2: The map fence is drawn and the device is outside the fence
820 )))
821 |=(% style="width: 160px;" %)HSW1857|(% style="width:282px" %)USB disk download |(% style="width:452px" %)(((
822 * =0: download project
823 * =1: download firmware
824 * =2: enter the background
825 )))
826 |=(% style="width: 160px;" %)HSW1865|(% style="width:282px" %)Priority connection to the cloud|(% style="width:452px" %)(((
827 * =0: priority Ethernet
828 * =1: priority WLAN
829 * =2: priority 4G
830 )))
831 |=(% style="width: 160px;" %)HSW1866|(% style="width:282px" %)Delete the Lua extension module file|(% style="width:452px" %)(((
832 * =0: delete;
833 * = Others: do not delete
834 )))
835 |=(% style="width: 160px;" %)HSW1867|(% style="width:282px" %)Reset mode|(% style="width:452px" %)(((
836 Monitor address is set during reset of reset switch, whether to cancel reset,
837
838 * = 0: yes (default);
839 * = 1: no
840 )))
841 |=(% style="width: 160px;" %)HSW1868|(% style="width:282px" %)Double-click or long press the record type table mode|(% style="width:452px" %)(((
842 Controls whether the button pops up when double-clicking or long pressing on record type table object
843
844 * = 0: yes (default);
845 * = 1: no
846 )))
847 |=(% style="width: 160px;" %)(((
848 HSW1869
849 )))|(% style="width:282px" %)(((
850 Dynamic screensaver countdown
851 )))|(% style="width:452px" %)(((
852 Countdown to enter dynamic screensaver effect, unit (S)
853 )))
854 |=(% style="width: 160px;" %)(((
855 HSW1870
856 )))|(% style="width:282px" %)(((
857 Display or set the dynamic or static IP mode of Ethernet1
858 )))|(% style="width:452px" %)(((
859 HSX1870.0 = 0, Static IP mode
860
861 HSX1870.0 = 1, dynamic IP mode
862 )))
863 |=(% style="width: 160px;" %)(((
864 HSW1871
865 )))|(% style="width:282px" %)(((
866 Confirm the IP, subnet mask, gateway, DNS1, DNS2, and dynamic static IP settings for Ethernet1
867 )))|(% style="width:452px" %)(((
868 ~= 1, confirm the setting (i.e., after modifying IP-related information, set this address to 1, representing confirmation of the modification, after which it will be reset to 0)
869 )))
870 |=(% style="width: 160px;" %)(((
871 HSW1872
872 )))|(% colspan="1" rowspan="8" style="width:282px" %)(((
873 ①Display and modify DNS1 and DNS2 of Ethernet1
874
875 ②Related registers can be read and written mode (only static IP mode can be written)
876 )))|(% style="width:452px" %)(((
877 Ethernet1 Local DNS1 address high byte 1
878 )))
879 |=(% style="width: 160px;" %)(((
880 HSW1873
881 )))|(% style="width:452px" %)Ethernet1 Local DNS1 address high byte 2
882 |=(% style="width: 160px;" %)(((
883 HSW1874
884 )))|(% style="width:452px" %)Ethernet1 Local DNS1 address high byte 3
885 |=(% style="width: 160px;" %)(((
886 HSW1875
887 )))|(% style="width:452px" %)Ethernet1 Local DNS1 address high byte 4
888 |=(% style="width: 160px;" %)(((
889 HSW1876
890 )))|(% style="width:452px" %)Ethernet1 Local DNS2 address high byte 1
891 |=(% style="width: 160px;" %)(((
892 HSW1877
893 )))|(% style="width:452px" %)Ethernet1 Local DNS2 address high byte 2
894 |=(% style="width: 160px;" %)(((
895 HSW1878
896 )))|(% style="width:452px" %)Ethernet1 Local DNS2 address high byte 3
897 |=(% style="width: 160px;" %)(((
898 HSW1879
899 )))|(% style="width:452px" %)Ethernet1 Local DNS2 address high byte 4
900 |=(% style="width: 160px;" %)HSW1890|(% colspan="1" style="width:282px" %)Enable refresh current network signal|(% style="width:452px" %)(((
901 * =1: Refresh the network signal once after triggered (This register will be automatically reset after triggered, only update the signal value once after per 15 seconds, not able to update twice in the short interval)
902 * =Others: not refresh
903 )))
904 |=(% style="width: 160px;" %)HSW1891|(% colspan="1" style="width:282px" %)Enable clear cache for screen data  |(% style="width:452px" %)(((
905 * =1, not clear screen cache when switch language
906 * =2, trigger clear cache of all screens for once time
907 * =3, always clear cache of all screen data
908 )))
909 |=(% style="width: 160px;" %)HSW10000~~19999|(% style="width:282px" %)Power-down storage area|(% style="width:452px" %)After restart, the data remains
910 |=(% style="width: 160px;" %)HSW10035|(% rowspan="13" style="width:282px" %)(((
911 Note: Valid when Ethernet1 of HMI is plugged into the network cable.
912 ① When the Ethernet setting is enabled in the project parameters, this register displays the set value.
913 ② When the Ethernet setting is not enabled in the engineering parameters, the register displays the Ethernet IP automatically acquired by the HMI.
914 ③ When the HMI is not plugged into the network cable, the register will show 0 whether the engineering parameters are set or not.
915 ④ IP related registers can be read and written (only static IP mode can be written).
916 )))|(% style="width:452px" %)Local IP address high byte 1
917 |=(% style="width: 160px;" %)HSW10036|(% style="width:452px" %)Local IP address high byte 2
918 |=(% style="width: 160px;" %)HSW10037|(% style="width:452px" %)Local IP address high byte 3
919 |=(% style="width: 160px;" %)HSW10038|(% style="width:452px" %)Local IP address high byte 4
920 |=(% style="width: 160px;" %)HSW10039|(% style="width:452px" %)Local mask IP address high byte 1
921 |=(% style="width: 160px;" %)HSW10040|(% style="width:452px" %)Local mask IP address high byte 2
922 |=(% style="width: 160px;" %)HSW10041|(% style="width:452px" %)Local mask IP address high byte 3
923 |=(% style="width: 160px;" %)HSW10042|(% style="width:452px" %)Local mask IP address high byte 4
924 |=(% style="width: 160px;" %)HSW10043|(% style="width:452px" %)Local gateway address high byte 1
925 |=(% style="width: 160px;" %)HSW10044|(% style="width:452px" %)Local gateway address high byte 2
926 |=(% style="width: 160px;" %)HSW10045|(% style="width:452px" %)Local gateway address high byte 3
927 |=(% style="width: 160px;" %)HSW10046|(% style="width:452px" %)Local gateway address high byte 4
928 |=(% style="width: 160px;" %)HSW10047|(% style="width:452px" %)Local port address
929 |=(% style="width: 160px;" %)HSW10048|(% rowspan="6" style="width:282px" %)(((
930 ①Display the MAC code of Ethernet1 NIC
931
932 (hexadecimal display)
933
934 ②Read-only mode, not modifiable
935 )))|(% style="width:452px" %)Local MAC code high word 1
936 |=(% style="width: 160px;" %)HSW10049|(% style="width:452px" %)Local MAC code high word 2
937 |=(% style="width: 160px;" %)HSW10050|(% style="width:452px" %)Local MAC code high word 3
938 |=(% style="width: 160px;" %)HSW10051|(% style="width:452px" %)Local MAC code high word 4
939 |=(% style="width: 160px;" %)HSW10052|(% style="width:452px" %)Local MAC code high word 5
940 |=(% style="width: 160px;" %)HSW10053|(% style="width:452px" %)Local MAC code high word 6
941 |=(% style="width: 160px;" %)HSW10118|(% colspan="1" rowspan="2" style="width:282px" %)TSAP settings for HMI in the Siemens LOGO! 8 protocol|(% style="width:452px" %)HMI local TSAP, which corresponds to the remote TSAP of PLC
942 |=(% style="width: 160px;" %)HSW10119|(% style="width:452px" %)HMI remote TSAP, which corresponds to the local TSAP of PLC
943 |=(% style="width: 160px;" %)HSW10461~~10493|(% style="width:282px" %)Remote access password|(% style="width:452px" %)8-character remote access password
944 |=(% style="width: 160px;" %)HSW10494~~10558|(% style="width:282px" %)Machine ID (Read only)|(% style="width:452px" %)Machine ID for remote access (read only 64-bit)
945 |=(% style="width: 160px;" %)HSW10576|(% style="width:282px" %)Save dynamic installment settings|(% style="width:452px" %)HSX10576.0=1: Save the set dynamic installment information
946 |=(% style="width: 160px;" %)HSW10577|(% style="width:282px" %)Control address for installment|(% style="width:452px" %)(((
947 * HSX10577.0=0: disable dynamic installment
948 * HSX10577.0=1: enable dynamic installment
949 * HSX10577.1=0: disable static installment
950 * HSX10577.1=1: enable static installment
951 )))
952 |=(% style="width: 160px;" %)HSW10578-10583|(% style="width:282px" %)Password for dynamic installment|(% style="width:452px" %)Character Input/ Display (length: 6)
953 |=(% style="width: 160px;" %)HSW10584-10586|(% style="width:282px" %)Expiry time of dynamic installment|(% style="width:452px" %)Expiry time: YYYYMMDD (Numeric Input/ Display)
954 |=(% style="width: 160px;" %)HSW10587-10589|(% style="width:282px" %)Last expiry time of dynamic installment|(% style="width:452px" %)Expiry time: YYYYMMDD (Numeric Input/ Display)
955 |=(% style="width: 160px;" %)HSW10590|(% style="width:282px" %)Background light time|(% style="width:452px" %)(((
956 Set the light time for background
957
958 * =0: The screen backlight is always on.
959 * =Others: The screen backlight is on for a period of time and then turns off. The length of time is controlled by the value of the register address. Unit: second.
960 )))
961 |=(% style="width: 160px;" %)HSW10591|(% style="width:282px" %)Backlight brightness adjustment|(% style="width:452px" %)Backlight brightness range: 1 (darkest) ~~ 100 (brightest)
962 |=(% style="width: 160px;" %)HSW10603|(% style="width:282px" %)Set the printer to print orientation|(% style="width:452px" %)(((
963 Set the print direction:
964
965 * =1: Forward printing
966 * =2: Reverse print
967 * =Other: Forward print
968 )))
969 |=(% style="width: 160px;" %)HSW10604|(% style="width:282px" %)Print dot type|(% style="width:452px" %)(((
970 * =1: new firmware 8 dot matrix type
971 * =2: new firmware 24 dot matrix type
972 * =3: old firmware 8 dot matrix type
973 * =4: old firmware 24 dot matrix type
974 * =Other: new firmware 8 dot matrix type
975 )))
976 |=(% style="width: 160px;" %)HSW10605|(% style="width:282px" %)Print width of printer|(% style="width:452px" %)Set the width of the printer to print (in pixels), such as HSW10605 = 394: The printer supports images with a print width of 394 pixels
977 |=(% style="width: 160px;" %)HSW10606|(% style="width:282px" %)Printer instruction type|(% style="width:452px" %)(((
978 * =1: Graphic print type
979 * =2: Dot density printing type
980 * =3: special for EPSON printer
981 )))
982 |=(% style="width: 160px;" %)HSW10607|(% style="width:282px" %)Printer paper cutting function|(% style="width:452px" %)(((
983 * =1: Enable
984 * =2: Disable
985 )))
986 |=(% style="width: 160px;" %)HSW10608|(% style="width:282px" %)Print the alignment of the text|(% style="width:452px" %)(((
987 * =1: Left alignment
988 * =2: Center alignment
989 * =3: Right alignment
990 )))
991 |=(% style="width: 160px;" %)HSW10610|(% style="width:282px" %)Set weconcloud server|(% style="width:452px" %)(((
992 * =0: Select the server configured in "Project Settings"
993 * =1: select Server 1
994 * =2: select Server 2
995 )))
996 |=(% style="width: 160px;" %)HSW11750|(% style="width:282px" %)Set the language of the Message List prompt** (ie series)**|(% style="width:452px" %)(((
997 * =0: which is followed the project language
998 * =1: English
999 * =2: Chinese
1000 )))
1001 |=(% style="width: 160px;" %)HSW11756|(% style="width:282px" %)(((
1002 Access permission restrictions
1003
1004 (ig series and** **8000/9000 series with -R after system upgrade)
1005 )))|(% style="width:452px" %)(((
1006 * =0: LAN or the external network both OK
1007 * =1: Only LAN access
1008 * =2: Only external network can access
1009 )))
1010 |=(% style="width: 160px;" %)HSW11757|(% style="width:282px" %)Enable the valid date of the dynamic installment password|(% style="width:452px" %)(((
1011 * =0: Disabled
1012 * =1: Enable
1013 )))
1014 |=(% style="width: 160px;" %)HSW11758|(% style="width:282px" %)Enable Screensaver|(% style="width:452px" %)(((
1015 * =0: Disabled
1016 * =1: Enable
1017 )))
1018 |=(% style="width: 160px;" %)HSW11759|(% style="width:282px" %)Screensaver interval time|(% style="width:452px" %)(((
1019 Set the time how long will enter Screensaver (Range 10~~43200s)
1020 )))
1021 |=(% style="width: 160px;" %)HSW11760|(% style="width:282px" %)Screensaver countdown|(% style="width:452px" %)Display the countdown to enter the Screensaver, unit: second.
1022 |=(% style="width: 160px;" %)HSW11761|(% style="width:282px" %)Screensaver screen number|(% style="width:452px" %)Set the screen number for Screensaver
1023 |=(% style="width: 160px;" %)(((
1024 HSW11762
1025 )))|(% style="width:282px" %)(((
1026 Dynamic screensaver control address
1027 )))|(% style="width:452px" %)(((
1028 HSX11762.0=0, initialize with project configuration;
1029
1030 HSX11762.0=1, initialize with special register configuration;
1031
1032 HSX11762.1=0, disable dynamic screensaver;
1033
1034 HSX11762.1=1, enable dynamic screensaver
1035 )))
1036 |=(% style="width: 160px;" %)(((
1037 HSW11763
1038 )))|(% style="width:282px" %)(((
1039 Waiting time to enter the dynamic screensaver
1040 )))|(% style="width:452px" %)(((
1041 Waiting time when the screen is not operated, range 1~~720 minutes
1042 )))
1043 |=(% style="width: 160px;" %)(((
1044 HSW11764
1045 )))|(% style="width:282px" %)(((
1046 Animated screensaver animation type
1047 )))|(% style="width:452px" %)(((
1048 ~=0: Raster,=1: Blinds,=2: Bubble
1049 )))
1050
1051 == Serial port communication configuration ==
1052
1053 (% class="table-bordered" %)
1054 |=(% scope="row" style="width: 102px;" %)Port|=(% style="width: 173px;" %)**Function**|=(% style="width: 122px;" %)**Address**|=(% colspan="2" style="width: 506px;" %)**Description**
1055 |(% colspan="1" rowspan="11" style="width:102px" %)COM1|(% style="width:173px" %)Communication mode|(% style="width:122px" %)HSW10061|(% colspan="2" style="width:506px" %)(((
1056 * =0: RS232
1057 * =1: RS485
1058 * =2: RS422
1059 )))
1060 |(% style="width:173px" %)Baud rate|(% style="width:122px" %)HSW10062|(% colspan="2" style="width:506px" %)(((
1061 * =0: 1200
1062 * =1: 2400
1063 * =2: 4800
1064 * =3: 9600
1065 * =4: 19200
1066 * =5: 38400
1067 * =6: 57600
1068 * =7: 115200
1069 * =8: 230400
1070 )))
1071 |(% style="width:173px" %)Data bit|(% style="width:122px" %)HSW10063|(% colspan="2" style="width:506px" %)(((
1072 * =7: 7 bit
1073 * =8: 8 bit
1074 )))
1075 |(% style="width:173px" %)Stop bit|(% style="width:122px" %)HSW10064|(% colspan="2" style="width:506px" %)(((
1076 * =1: 1 bit
1077 * =2: 2 bit
1078 )))
1079 |(% style="width:173px" %)Check bit|(% style="width:122px" %)HSW10065|(% colspan="2" style="width:506px" %)(((
1080 * =0: None
1081 * =1: ODD
1082 * =2: EVEN
1083 )))
1084 |(% style="width:173px" %)Wait timeout|(% style="width:122px" %)HSW10066|(% colspan="2" style="width:506px" %)(((
1085 * Unit: ms.
1086 * Range: 0 to 30000
1087 )))
1088 |(% style="width:173px" %)reveive timeout|(% style="width:122px" %)HSW10067|(% colspan="2" style="width:506px" %)(((
1089 * Unit: ms.
1090 * Range: 0 to 30000
1091 )))
1092 |(% style="width:173px" %)Retry time|(% style="width:122px" %)HSW10068|(% colspan="2" style="width:506px" %)(((
1093 * Unit: times.
1094 * Range: 0 to 100
1095 )))
1096 |(% style="width:173px" %)Retry timeout|(% style="width:122px" %)HSW10069|(% colspan="2" style="width:506px" %)(((
1097 * Unit: s.
1098 * Range: 0 to 300
1099 )))
1100 |(% style="width:173px" %)HMI station number|(% style="width:122px" %)HSW10070|(% colspan="2" style="width:506px" %)
1101 |(% style="width:173px" %)PLC station number|(% style="width:122px" %)HSW10071|(% colspan="2" style="width:506px" %)
1102 |(% colspan="1" rowspan="11" style="width:102px" %)COM1-2|(% style="width:173px" %)Communication mode|(% style="width:122px" %)HSW10094|(% colspan="2" style="width:506px" %)(((
1103 * =0: RS232
1104 * =1: RS485
1105 * =2: RS422
1106 * =6: RS485-2
1107 )))
1108 |(% style="width:173px" %)Baud rate|(% style="width:122px" %)HSW10095|(% colspan="2" style="width:506px" %)(((
1109 * =0: 1200
1110 * =1: 2400
1111 * =2: 4800
1112 * =3: 9600
1113 * =4: 19200
1114 * =5: 38400
1115 * =6: 57600
1116 * =7: 115200
1117 * =8: 230400
1118 )))
1119 |(% style="width:173px" %)Data bit|(% style="width:122px" %)HSW10096|(% colspan="2" style="width:506px" %)(((
1120 * =7: 7 bit
1121 * =8: 8 bit
1122 )))
1123 |(% style="width:173px" %)Stop bit|(% style="width:122px" %)HSW10097|(% colspan="2" style="width:506px" %)(((
1124 * =1: 1 bit
1125 * =2: 2 bit
1126 )))
1127 |(% style="width:173px" %)Check bit|(% style="width:122px" %)HSW10098|(% colspan="2" style="width:506px" %)(((
1128 * =0: None
1129 * =1: ODD
1130 * =2: EVEN
1131 )))
1132 |(% style="width:173px" %)Wait timeout|(% style="width:122px" %)HSW10099|(% colspan="2" style="width:506px" %)(((
1133 * Unit: ms.
1134 * Range: 0 to 30000
1135 )))
1136 |(% style="width:173px" %)receive timeout|(% style="width:122px" %)HSW10100|(% colspan="2" style="width:506px" %)(((
1137 * Unit: ms.
1138 * Range: 0 to 30000
1139 )))
1140 |(% style="width:173px" %)Retry time|(% style="width:122px" %)HSW10101|(% colspan="2" style="width:506px" %)(((
1141 * Unit: times.
1142 * Range: 0 to 100
1143 )))
1144 |(% style="width:173px" %)Retry timeout|(% style="width:122px" %)HSW10102|(% colspan="2" style="width:506px" %)(((
1145 * Unit: s.
1146 * Range: 0 to 30
1147 )))
1148 |(% style="width:173px" %)HMI station number|(% style="width:122px" %)HSW10103|(% colspan="2" style="width:506px" %)
1149 |(% style="width:173px" %)PLC station number|(% style="width:122px" %)HSW10104|(% colspan="2" style="width:506px" %)
1150 |(% colspan="1" rowspan="11" style="width:102px" %)COM1-3|(% style="width:173px" %)Communication mode|(% style="width:122px" %)HSW10120|(% colspan="2" style="width:506px" %)(((
1151 * =0: RS232
1152 * =1: RS485
1153 * =2: RS422
1154 * =6: RS485-2
1155 )))
1156 |(% style="width:173px" %)Baud rate|(% style="width:122px" %)HSW10121|(% colspan="2" style="width:506px" %)(((
1157 * =0: 1200
1158 * =1: 2400
1159 * =2: 4800
1160 * =3: 9600
1161 * =4: 19200
1162 * =5: 38400
1163 * =6: 57600
1164 * =7: 115200
1165 * =8: 230400
1166 )))
1167 |(% style="width:173px" %)Data bit|(% style="width:122px" %)HSW10122|(% colspan="2" style="width:506px" %)(((
1168 * =7: 7 bit
1169 * =8: 8 bit
1170 )))
1171 |(% style="width:173px" %)Stop bit|(% style="width:122px" %)HSW10123|(% colspan="2" style="width:506px" %)(((
1172 * =1: 1 bit
1173 * =2: 2 bit
1174 )))
1175 |(% style="width:173px" %)Check bit|(% style="width:122px" %)HSW10124|(% colspan="2" style="width:506px" %)(((
1176 * =0: None
1177 * =1: ODD
1178 * =2: EVEN
1179 )))
1180 |(% style="width:173px" %)Wait timeout|(% style="width:122px" %)HSW10125|(% colspan="2" style="width:506px" %)(((
1181 * Unit: ms.
1182 * Range: 0 to 30000
1183 )))
1184 |(% style="width:173px" %)receive timeout|(% style="width:122px" %)HSW10126|(% colspan="2" style="width:506px" %)(((
1185 * Unit: ms.
1186 * Range: 0 to 30000
1187 )))
1188 |(% style="width:173px" %)Retry time|(% style="width:122px" %)HSW10127|(% colspan="2" style="width:506px" %)(((
1189 * Unit: times.
1190 * Range: 0 to 100
1191 )))
1192 |(% style="width:173px" %)Retry timeout|(% style="width:122px" %)HSW10128|(% colspan="2" style="width:506px" %)(((
1193 * Unit: s.
1194 * Range: 0 to 30
1195 )))
1196 |(% style="width:173px" %)HMI station number|(% style="width:122px" %)HSW10129|(% colspan="2" style="width:506px" %)
1197 |(% style="width:173px" %)PLC station number|(% style="width:122px" %)HSW10130|(% colspan="2" style="width:506px" %)
1198 |(% colspan="1" rowspan="11" style="width:102px" %)COM2|(% style="width:173px" %)Communication mode|(% style="width:122px" %)HSW10072|(% colspan="2" style="width:506px" %)(((
1199 * =0: RS232
1200 * =1: RS485
1201 )))
1202 |(% style="width:173px" %)Baud rate|(% style="width:122px" %)HSW10073|(% colspan="2" style="width:506px" %)(((
1203 * =0: 1200
1204 * =1: 2400
1205 * =2: 4800
1206 * =3: 9600
1207 * =4: 19200
1208 * =5: 38400
1209 * =6: 57600
1210 * =7: 115200
1211 * =8: 230400
1212 )))
1213 |(% style="width:173px" %)Data bit|(% style="width:122px" %)HSW10074|(% colspan="2" style="width:506px" %)(((
1214 * =7: 7 bit
1215 * =8: 8 bit
1216 )))
1217 |(% style="width:173px" %)Stop bit|(% style="width:122px" %)HSW10075|(% colspan="2" style="width:506px" %)(((
1218 * =1: 1 bit
1219 * =2: 2 bit
1220 )))
1221 |(% style="width:173px" %)Check bit|(% style="width:122px" %)HSW10076|(% colspan="2" style="width:506px" %)(((
1222 * =0: None
1223 * =1: ODD
1224 * =2: EVEN
1225 )))
1226 |(% style="width:173px" %)Wait timeout|(% style="width:122px" %)HSW10077|(% colspan="2" style="width:506px" %)(((
1227 * Unit: ms.
1228 * Range: 0 to 30000
1229 )))
1230 |(% style="width:173px" %)receive timeout|(% style="width:122px" %)HSW10078|(% colspan="2" style="width:506px" %)(((
1231 * Unit: ms.
1232 * Range: 0 to 30000
1233 )))
1234 |(% style="width:173px" %)Retry time|(% style="width:122px" %)HSW10079|(% colspan="2" style="width:506px" %)(((
1235 * Unit: times.
1236 * Range: 0 to 100
1237 )))
1238 |(% style="width:173px" %)Retry timeout|(% style="width:122px" %)HSW10080|(% colspan="2" style="width:506px" %)(((
1239 * Unit: s.
1240 * Range: 0 to 30
1241 )))
1242 |(% style="width:173px" %)HMI station number|(% style="width:122px" %)HSW10081|(% colspan="2" style="width:506px" %)
1243 |(% style="width:173px" %)PLC station number|(% style="width:122px" %)HSW10082|(% colspan="2" style="width:506px" %)
1244 |(% colspan="1" rowspan="11" style="width:102px" %)COM2-2|(% style="width:173px" %)Communication mode|(% style="width:122px" %)HSW10105|(% colspan="2" style="width:506px" %)(((
1245 * =0: RS232
1246 * =1: RS485
1247 )))
1248 |(% style="width:173px" %)Baud rate|(% style="width:122px" %)HSW10106|(% colspan="2" style="width:506px" %)(((
1249 * =0: 1200
1250 * =1: 2400
1251 * =2: 4800
1252 * =3: 9600
1253 * =4: 19200
1254 * =5: 38400
1255 * =6: 57600
1256 * =7: 115200
1257 * =8: 230400
1258 )))
1259 |(% style="width:173px" %)Data bit|(% style="width:122px" %)HSW10107|(% colspan="2" style="width:506px" %)(((
1260 * =7: 7 bit
1261 * =8: 8 bit
1262 )))
1263 |(% style="width:173px" %)Stop bit|(% style="width:122px" %)HSW10108|(% colspan="2" style="width:506px" %)(((
1264 * =1: 1 bit
1265 * =2: 2 bit
1266 )))
1267 |(% style="width:173px" %)Check bit|(% style="width:122px" %)HSW10109|(% colspan="2" style="width:506px" %)(((
1268 * =0: None
1269 * =1: ODD
1270 * =2: EVEN
1271 )))
1272 |(% style="width:173px" %)Wait timeout|(% style="width:122px" %)HSW10110|(% colspan="2" style="width:506px" %)(((
1273 * Unit: ms.
1274 * Range: 0 to 30000
1275 )))
1276 |(% style="width:173px" %)receive timeout|(% style="width:122px" %)HSW10111|(% colspan="2" style="width:506px" %)(((
1277 * Unit: ms.
1278 * Range: 0 to 30000
1279 )))
1280 |(% style="width:173px" %)Retry time|(% style="width:122px" %)HSW10112|(% colspan="2" style="width:506px" %)(((
1281 * Unit: times.
1282 * Range: 0 to 100
1283 )))
1284 |(% style="width:173px" %)Retry timeout|(% style="width:122px" %)HSW10113|(% colspan="2" style="width:506px" %)(((
1285 * Unit: s.
1286 * Range: 0 to 30
1287 )))
1288 |(% style="width:173px" %)HMI station number|(% style="width:122px" %)HSW10114|(% colspan="2" style="width:506px" %)
1289 |(% style="width:173px" %)PLC station number|(% style="width:122px" %)HSW10115|(% colspan="2" style="width:506px" %)
1290 |(% colspan="1" rowspan="11" style="width:102px" %)COM3|(% style="width:173px" %)Communication mode|(% style="width:122px" %)HSW10083|(% colspan="2" style="width:506px" %)(((
1291 * =1: RS485
1292 )))
1293 |(% style="width:173px" %)Baud rate|(% style="width:122px" %)HSW10084|(% colspan="2" style="width:506px" %)(((
1294 * =0: 1200
1295 * =1: 2400
1296 * =2: 4800
1297 * =3: 9600
1298 * =4: 19200
1299 * =5: 38400
1300 * =6: 57600
1301 * =7: 115200
1302 * =8: 230400
1303 )))
1304 |(% style="width:173px" %)Data bit|(% style="width:122px" %)HSW10085|(% colspan="2" style="width:506px" %)(((
1305 * =7: 7 bit
1306 * =8: 8 bit
1307 )))
1308 |(% style="width:173px" %)Stop bit|(% style="width:122px" %)HSW10086|(% colspan="2" style="width:506px" %)(((
1309 * =1: 1 bit
1310 * =2: 2 bit
1311 )))
1312 |(% style="width:173px" %)Check bit|(% style="width:122px" %)HSW10087|(% colspan="2" style="width:506px" %)(((
1313 * =0: None
1314 * =1: ODD
1315 * =2: EVEN
1316 )))
1317 |(% style="width:173px" %)Wait timeout|(% style="width:122px" %)HSW10088|(% colspan="2" style="width:506px" %)(((
1318 * Unit: ms.
1319 * Range: 0 to 30000
1320 )))
1321 |(% style="width:173px" %)receive timeout|(% style="width:122px" %)HSW10089|(% colspan="2" style="width:506px" %)(((
1322 * Unit: ms.
1323 * Range: 0 to 30000
1324 )))
1325 |(% style="width:173px" %)Retry time|(% style="width:122px" %)HSW10090|(% colspan="2" style="width:506px" %)(((
1326 * Unit: times.
1327 * Range: 0 to 100
1328 )))
1329 |(% style="width:173px" %)Retry timeout|(% style="width:122px" %)HSW10091|(% colspan="2" style="width:506px" %)(((
1330 * Unit: s.
1331 * Range: 0 to 30
1332 )))
1333 |(% style="width:173px" %)HMI station number|(% style="width:122px" %)HSW10092|(% colspan="2" style="width:506px" %)
1334 |(% style="width:173px" %)PLC station number|(% style="width:122px" %)HSW10093|(% colspan="2" style="width:506px" %)
1335 |(% colspan="1" rowspan="2" style="width:102px" %)CAN port|(% style="width:173px" %)CAN1 baud rate|(% style="width:122px" %)HSW010116|(% style="width:299px" %)(((
1336 Unit: K, the baud rate must be an integer.
1337
1338 For example, when the baud rate required is 250000, just enter 250.
1339 )))|(% colspan="1" rowspan="2" style="width:218px" %)**✎Note: **If baud rate has been modified,please wait 5 seconds,then restart the HMI to take effect.
1340 |(% style="width:173px" %)CAN2 baud rate|(% style="width:122px" %)HSW010117|(% style="width:299px" %)(((
1341 Unit: K, the baud rate must be an integer.
1342
1343 For example, when the baud rate required is 250000, just enter 250.
1344 )))
1345
1346 == Ethernet communication configuration ==
1347
1348 (% class="table-bordered" %)
1349 |(% style="width:40px" %)**No.**|(% style="width:295px" %)**Function**|(% style="width:220px" %)**Address**|(% style="width:336px" %)**Description**
1350 |(% rowspan="7" style="width:40px" %)1|(% colspan="1" rowspan="7" style="width:295px" %)Ethernet parameter configuration for communication number 1 in list. Configure those addresses according to connected device. After configuration, wait for 5 seconds and restart the HMI.|(% style="width:220px" %)HSW11004|(% style="width:336px" %)Device IP address high word 1
1351 |(% style="width:220px" %)HSW11005|(% style="width:336px" %)Device IP address high word 2
1352 |(% style="width:220px" %)HSW11006|(% style="width:336px" %)Device IP address high word 3
1353 |(% style="width:220px" %)HSW11007|(% style="width:336px" %)Device IP address high word 4
1354 |(% style="width:220px" %)HSW11008|(% style="width:336px" %)Device Port number
1355 |(% style="width:220px" %)HSW11009|(% style="width:336px" %)(((
1356 ~=2 TCP
1357
1358 ~=3 UDP
1359 )))
1360 |(% style="width:220px" %)HSW11010|(% style="width:336px" %)Reserved
1361 |(% rowspan="7" style="width:40px" %)2|(% colspan="1" rowspan="7" style="width:295px" %)Ethernet parameter configuration for communication number 2 in list. Configure those addresses according to connected device. After configuration, wait for 5 seconds and restart the HMI.|(% style="width:220px" %)HSW11011|(% style="width:336px" %)Device IP address high word 1
1362 |(% style="width:220px" %)HSW11012|(% style="width:336px" %)Device IP address high word 2
1363 |(% style="width:220px" %)HSW11013|(% style="width:336px" %)Device IP address high word 3
1364 |(% style="width:220px" %)HSW11014|(% style="width:336px" %)Device IP address high word 4
1365 |(% style="width:220px" %)HSW11015|(% style="width:336px" %)Device Port number
1366 |(% style="width:220px" %)HSW11016|(% style="width:336px" %)(((
1367 ~=2 TCP
1368
1369 ~=3 UDP
1370 )))
1371 |(% style="width:220px" %)HSW11017|(% style="width:336px" %)Reserved
1372 |(% style="width:40px" %)…|(% style="width:295px" %) |(% style="width:220px" %)…|(% style="width:336px" %)…
1373 |(% rowspan="7" style="width:40px" %)32|(% colspan="1" rowspan="7" style="width:295px" %)Ethernet parameter configuration for communication number 32 in list. Configure those addresses according to connected device. After configuration, wait for 5 seconds and restart the HMI.|(% style="width:220px" %)HSW11221|(% style="width:336px" %)Device IP address high word 1
1374 |(% style="width:220px" %)HSW11222|(% style="width:336px" %)Device IP address high word 2
1375 |(% style="width:220px" %)HSW11223|(% style="width:336px" %)Device IP address high word 3
1376 |(% style="width:220px" %)HSW11224|(% style="width:336px" %)Device IP address high word 4
1377 |(% style="width:220px" %)HSW11225|(% style="width:336px" %)Device Port number
1378 |(% style="width:220px" %)HSW11226|(% style="width:336px" %)(((
1379 ~=2 TCP;
1380
1381 ~=3 UDP
1382 )))
1383 |(% style="width:220px" %)HSW11227|(% style="width:336px" %)Reserved
1384
1385 (% class="box infomessage" %)
1386 (((
1387 **✎Note:** The number of Ethernet connections supported by different HMI series varies.
1388 )))
1389
1390 == Communication control ==
1391
1392 (% class="table-bordered" %)
1393 |=(% style="width: 135px;" %)**Communication No.**|=(% style="width: 102px;" %)**Station No.**|=(% style="width: 185px;" %)**Control bit**|=(% style="width: 191px;" %)**Communication lamp**|=(% style="width: 271px;" %)**Description**
1394 |(% colspan="1" rowspan="16" style="width:135px" %)1|(% style="width:102px" %)0~~15|(% style="width:185px" %)HSX550.0～HSX550.15|(% style="width:191px" %)HSX558.0～HSX558.15|(% rowspan="160" style="width:271px" %)Communication number refers to the number in "Communication Port Configuration". A number provides 256 device station numbers. Each station number corresponds to a communication control bit and a communication indicator bit. Registers HSX550.0 to HSX805.15 are used to control the station numbers from 0 to 127, and registers HSX1150.0 to HSX1405.15 are used to control station numbers 128 to 255.
1395 |(% style="width:102px" %)16~~31|(% style="width:185px" %)HSX551.0～HSX551.15|(% style="width:191px" %)HSX559.0～HSX559.15
1396 |(% style="width:102px" %)32~~47|(% style="width:185px" %)HSX552.0～HSX552.15|(% style="width:191px" %)HSX560.0～HSX560.15
1397 |(% style="width:102px" %)48~~63|(% style="width:185px" %)HSX553.0～HSX553.15|(% style="width:191px" %)HSX561.0～HSX561.15
1398 |(% style="width:102px" %)64～79|(% style="width:185px" %)HSX554.0～HSX554.15|(% style="width:191px" %)HSX562.0～HSX562.15
1399 |(% style="width:102px" %)80～95|(% style="width:185px" %)HSX555.0～HSX555.15|(% style="width:191px" %)HSX563.0～HSX563.15
1400 |(% style="width:102px" %)96～111|(% style="width:185px" %)HSX556.0～HSX556.15|(% style="width:191px" %)HSX564.0～HSX564.15
1401 |(% style="width:102px" %)112～127|(% style="width:185px" %)HSX557.0～HSX557.15|(% style="width:191px" %)HSX565.0～HSX565.15
1402 |(% style="width:102px" %)128～143|(% style="width:185px" %)HSX1150.0～HSX1150.15|(% style="width:191px" %)HSX1158.0～HSX1158.15
1403 |(% style="width:102px" %)144～159|(% style="width:185px" %)HSX1151.0～HSX1151.15|(% style="width:191px" %)HSX1159.0～HSX1159.15
1404 |(% style="width:102px" %)160～175|(% style="width:185px" %)HSX1152.0～HSX1152.15|(% style="width:191px" %)HSX1160.0～HSX1160.15
1405 |(% style="width:102px" %)176～191|(% style="width:185px" %)HSX1153.0～HSX1153.15|(% style="width:191px" %)HSX1161.0～HSX1161.15
1406 |(% style="width:102px" %)192～207|(% style="width:185px" %)HSX1154.0～HSX1154.15|(% style="width:191px" %)HSX1162.0～HSX1162.15
1407 |(% style="width:102px" %)208～223|(% style="width:185px" %)HSX1155.0～HSX1155.15|(% style="width:191px" %)HSX1163.0～HSX1163.15
1408 |(% style="width:102px" %)224～239|(% style="width:185px" %)HSX1156.0～HSX1156.15|(% style="width:191px" %)HSX1164.0～HSX1164.15
1409 |(% style="width:102px" %)240～255|(% style="width:185px" %)HSX1157.0～HSX1157.15|(% style="width:191px" %)HSX1165.0～HSX1165.15
1410 |(% colspan="1" rowspan="16" style="width:135px" %)2|(% style="width:102px" %)0～15|(% style="width:185px" %)HSX566.0～HSX566.15|(% style="width:191px" %)HSX574.0～HSX574.15
1411 |(% style="width:102px" %)16～31|(% style="width:185px" %)HSX567.0～HSX567.15|(% style="width:191px" %)HSX575.0～HSX575.15
1412 |(% style="width:102px" %)32～47|(% style="width:185px" %)HSX568.0～HSX568.15|(% style="width:191px" %)HSX576.0～HSX576.15
1413 |(% style="width:102px" %)48～63|(% style="width:185px" %)HSX569.0～HSX569.15|(% style="width:191px" %)HSX577.0～HSX577.15
1414 |(% style="width:102px" %)64～79|(% style="width:185px" %)HSX570.0～HSX570.15|(% style="width:191px" %)HSX578.0～HSX578.15
1415 |(% style="width:102px" %)80～95|(% style="width:185px" %)HSX571.0～HSX571.15|(% style="width:191px" %)HSX579.0～HSX579.15
1416 |(% style="width:102px" %)96～111|(% style="width:185px" %)HSX572.0～HSX572.15|(% style="width:191px" %)HSX580.0～HSX580.15
1417 |(% style="width:102px" %)112～127|(% style="width:185px" %)HSX573.0～HSX573.15|(% style="width:191px" %)HSX581.0～HSX581.15
1418 |(% style="width:102px" %)128～143|(% style="width:185px" %)HSX1166.0～HSX1166.15|(% style="width:191px" %)HSX1174.0～HSX1174.15
1419 |(% style="width:102px" %)144～159|(% style="width:185px" %)HSX1167.0～HSX1167.15|(% style="width:191px" %)HSX1175.0～HSX1175.15
1420 |(% style="width:102px" %)160～175|(% style="width:185px" %)HSX1168.0～HSX1168.15|(% style="width:191px" %)HSX1176.0～HSX1176.15
1421 |(% style="width:102px" %)176～191|(% style="width:185px" %)HSX1169.0～HSX1169.15|(% style="width:191px" %)HSX1177.0～HSX1177.15
1422 |(% style="width:102px" %)192～207|(% style="width:185px" %)HSX1170.0～HSX1170.15|(% style="width:191px" %)HSX1178.0～HSX1178.15
1423 |(% style="width:102px" %)208～223|(% style="width:185px" %)HSX1171.0～HSX1171.15|(% style="width:191px" %)HSX1179.0～HSX1179.15
1424 |(% style="width:102px" %)224～239|(% style="width:185px" %)HSX1172.0～HSX1172.15|(% style="width:191px" %)HSX1180.0～HSX1180.15
1425 |(% style="width:102px" %)240～255|(% style="width:185px" %)HSX1173.0～HSX1173.15|(% style="width:191px" %)HSX1181.0～HSX1181.15
1426 |(% colspan="1" rowspan="16" style="width:135px" %)3|(% style="width:102px" %)0～15|(% style="width:185px" %)HSX582.0～HSX582.15|(% style="width:191px" %)HSX590.0～HSX590.15
1427 |(% style="width:102px" %)16～31|(% style="width:185px" %)HSX583.0～HSX583.15|(% style="width:191px" %)HSX591.0～HSX591.15
1428 |(% style="width:102px" %)32～47|(% style="width:185px" %)HSX584.0～HSX584.15|(% style="width:191px" %)HSX592.0～HSX592.15
1429 |(% style="width:102px" %)48～63|(% style="width:185px" %)HSX585.0～HSX585.15|(% style="width:191px" %)HSX593.0～HSX593.15
1430 |(% style="width:102px" %)64～79|(% style="width:185px" %)HSX586.0～HSX586.15|(% style="width:191px" %)HSX594.0～HSX594.15
1431 |(% style="width:102px" %)80～95|(% style="width:185px" %)HSX587.0～HSX587.15|(% style="width:191px" %)HSX595.0～HSX595.15
1432 |(% style="width:102px" %)96～111|(% style="width:185px" %)HSX588.0～HSX588.15|(% style="width:191px" %)HSX596.0～HSX596.15
1433 |(% style="width:102px" %)112～127|(% style="width:185px" %)HSX589.0～HSX589.15|(% style="width:191px" %)HSX597.0～HSX597.15
1434 |(% style="width:102px" %)128～143|(% style="width:185px" %)HSX1182.0～HSX1182.15|(% style="width:191px" %)HSX1190.0～HSX1190.15
1435 |(% style="width:102px" %)144～159|(% style="width:185px" %)HSX1183.0～HSX1183.15|(% style="width:191px" %)HSX1191.0～HSX1191.15
1436 |(% style="width:102px" %)160～175|(% style="width:185px" %)HSX1184.0～HSX1184.15|(% style="width:191px" %)HSX1192.0～HSX1192.15
1437 |(% style="width:102px" %)176～191|(% style="width:185px" %)HSX1185.0～HSX1185.15|(% style="width:191px" %)HSX1193.0～HSX1193.15
1438 |(% style="width:102px" %)192～207|(% style="width:185px" %)HSX1186.0～HSX1186.15|(% style="width:191px" %)HSX1194.0～HSX1194.15
1439 |(% style="width:102px" %)208～223|(% style="width:185px" %)HSX1187.0～HSX1187.15|(% style="width:191px" %)HSX1195.0～HSX1195.15
1440 |(% style="width:102px" %)224～239|(% style="width:185px" %)HSX1188.0～HSX1188.15|(% style="width:191px" %)HSX1196.0～HSX1196.15
1441 |(% style="width:102px" %)240～255|(% style="width:185px" %)HSX1189.0～HSX1189.15|(% style="width:191px" %)HSX1197.0～HSX1197.15
1442 |(% colspan="1" rowspan="16" style="width:135px" %)4|(% style="width:102px" %)0～15|(% style="width:185px" %)HSX598.0～HSX598.15|(% style="width:191px" %)HSX606.0～HSX606.15
1443 |(% style="width:102px" %)16～31|(% style="width:185px" %)HSX599.0～HSX599.15|(% style="width:191px" %)HSX607.0～HSX607.15
1444 |(% style="width:102px" %)32～47|(% style="width:185px" %)HSX600.0～HSX600.15|(% style="width:191px" %)HSX608.0～HSX608.15
1445 |(% style="width:102px" %)48～63|(% style="width:185px" %)HSX601.0～HSX601.15|(% style="width:191px" %)HSX609.0～HSX609.15
1446 |(% style="width:102px" %)64～79|(% style="width:185px" %)HSX602.0～HSX602.15|(% style="width:191px" %)HSX610.0～HSX610.15
1447 |(% style="width:102px" %)80～95|(% style="width:185px" %)HSX603.0～HSX603.15|(% style="width:191px" %)HSX611.0～HSX611.15
1448 |(% style="width:102px" %)96～111|(% style="width:185px" %)HSX604.0～HSX604.15|(% style="width:191px" %)HSX612.0～HSX612.15
1449 |(% style="width:102px" %)112～127|(% style="width:185px" %)HSX605.0～HSX605.15|(% style="width:191px" %)HSX613.0～HSX613.15
1450 |(% style="width:102px" %)128～143|(% style="width:185px" %)HSX1198.0～HSX1198.15|(% style="width:191px" %)HSX1206.0～HSX1206.15
1451 |(% style="width:102px" %)144～159|(% style="width:185px" %)HSX1199.0～HSX1199.15|(% style="width:191px" %)HSX1207.0～HSX1207.15
1452 |(% style="width:102px" %)160～175|(% style="width:185px" %)HSX1200.0～HSX1200.15|(% style="width:191px" %)HSX1208.0～HSX1208.15
1453 |(% style="width:102px" %)176～191|(% style="width:185px" %)HSX1201.0～HSX1201.15|(% style="width:191px" %)HSX1209.0～HSX1209.15
1454 |(% style="width:102px" %)192～207|(% style="width:185px" %)HSX1202.0～HSX1202.15|(% style="width:191px" %)HSX1210.0～HSX1210.15
1455 |(% style="width:102px" %)208～223|(% style="width:185px" %)HSX1203.0～HSX1203.15|(% style="width:191px" %)HSX1211.0～HSX1211.15
1456 |(% style="width:102px" %)224～239|(% style="width:185px" %)HSX1204.0～HSX1204.15|(% style="width:191px" %)HSX1212.0～HSX1212.15
1457 |(% style="width:102px" %)240～255|(% style="width:185px" %)HSX1205.0～HSX1205.15|(% style="width:191px" %)HSX1213.0～HSX1213.15
1458 |(% colspan="1" rowspan="16" style="width:135px" %)5|(% style="width:102px" %)0～15|(% style="width:185px" %)HSX614.0～HSX614.15|(% style="width:191px" %)HSX622.0～HSX622.15
1459 |(% style="width:102px" %)16～31|(% style="width:185px" %)HSX615.0～HSX615.15|(% style="width:191px" %)HSX623.0～HSX623.15
1460 |(% style="width:102px" %)32～47|(% style="width:185px" %)HSX616.0～HSX616.15|(% style="width:191px" %)HSX624.0～HSX624.15
1461 |(% style="width:102px" %)48～63|(% style="width:185px" %)HSX617.0～HSX617.15|(% style="width:191px" %)HSX625.0～HSX625.15
1462 |(% style="width:102px" %)64～79|(% style="width:185px" %)HSX618.0～HSX618.15|(% style="width:191px" %)HSX626.0～HSX626.15
1463 |(% style="width:102px" %)80～95|(% style="width:185px" %)HSX619.0～HSX619.15|(% style="width:191px" %)HSX627.0～HSX627.15
1464 |(% style="width:102px" %)96～111|(% style="width:185px" %)HSX620.0～HSX620.15|(% style="width:191px" %)HSX628.0～HSX628.15
1465 |(% style="width:102px" %)112～127|(% style="width:185px" %)HSX621.0～HSX621.15|(% style="width:191px" %)HSX629.0～HSX629.15
1466 |(% style="width:102px" %)128～143|(% style="width:185px" %)HSX1214.0～HSX1214.15|(% style="width:191px" %)HSX1222.0～HSX1222.15
1467 |(% style="width:102px" %)144～159|(% style="width:185px" %)HSX1215.0～HSX1215.15|(% style="width:191px" %)HSX1223.0～HSX1223.15
1468 |(% style="width:102px" %)160～175|(% style="width:185px" %)HSX1216.0～HSX1216.15|(% style="width:191px" %)HSX1224.0～HSX1224.15
1469 |(% style="width:102px" %)176～191|(% style="width:185px" %)HSX1217.0～HSX1217.15|(% style="width:191px" %)HSX1225.0～HSX1225.15
1470 |(% style="width:102px" %)192～207|(% style="width:185px" %)HSX1218.0～HSX1218.15|(% style="width:191px" %)HSX1226.0～HSX1226.15
1471 |(% style="width:102px" %)208～223|(% style="width:185px" %)HSX1219.0～HSX1219.15|(% style="width:191px" %)HSX1227.0～HSX1227.15
1472 |(% style="width:102px" %)224～239|(% style="width:185px" %)HSX1220.0～HSX1220.15|(% style="width:191px" %)HSX1228.0～HSX1228.15
1473 |(% style="width:102px" %)240～255|(% style="width:185px" %)HSX1221.0～HSX1221.15|(% style="width:191px" %)HSX1229.0～HSX1229.15
1474 |(% colspan="1" rowspan="16" style="width:135px" %)6|(% style="width:102px" %)0～15|(% style="width:185px" %)HSX630.0～HSX630.15|(% style="width:191px" %)HSX638.0～HSX638.15
1475 |(% style="width:102px" %)16～31|(% style="width:185px" %)HSX631.0～HSX631.15|(% style="width:191px" %)HSX639.0～HSX639.15
1476 |(% style="width:102px" %)32～47|(% style="width:185px" %)HSX632.0～HSX632.15|(% style="width:191px" %)HSX640.0～HSX640.15
1477 |(% style="width:102px" %)48～63|(% style="width:185px" %)HSX633.0～HSX633.15|(% style="width:191px" %)HSX641.0～HSX641.15
1478 |(% style="width:102px" %)64～79|(% style="width:185px" %)HSX634.0～HSX634.15|(% style="width:191px" %)HSX642.0～HSX642.15
1479 |(% style="width:102px" %)80～95|(% style="width:185px" %)HSX635.0～HSX635.15|(% style="width:191px" %)HSX643.0～HSX643.15
1480 |(% style="width:102px" %)96～111|(% style="width:185px" %)HSX636.0～HSX636.15|(% style="width:191px" %)HSX644.0～HSX644.15
1481 |(% style="width:102px" %)112～127|(% style="width:185px" %)HSX637.0～HSX637.15|(% style="width:191px" %)HSX645.0～HSX645.15
1482 |(% style="width:102px" %)128～143|(% style="width:185px" %)HSX1230.0～HSX1230.15|(% style="width:191px" %)HSX1238.0～HSX1238.15
1483 |(% style="width:102px" %)144～159|(% style="width:185px" %)HSX1231.0～HSX1231.15|(% style="width:191px" %)HSX1239.0～HSX1239.15
1484 |(% style="width:102px" %)160～175|(% style="width:185px" %)HSX1232.0～HSX1232.15|(% style="width:191px" %)HSX1240.0～HSX1240.15
1485 |(% style="width:102px" %)176～191|(% style="width:185px" %)HSX1233.0～HSX1233.15|(% style="width:191px" %)HSX1241.0～HSX1241.15
1486 |(% style="width:102px" %)192～207|(% style="width:185px" %)HSX1234.0～HSX1234.15|(% style="width:191px" %)HSX1242.0～HSX1242.15
1487 |(% style="width:102px" %)208～223|(% style="width:185px" %)HSX1235.0～HSX1235.15|(% style="width:191px" %)HSX1243.0～HSX1243.15
1488 |(% style="width:102px" %)224～239|(% style="width:185px" %)HSX1236.0～HSX1236.15|(% style="width:191px" %)HSX1244.0～HSX1244.15
1489 |(% style="width:102px" %)240～255|(% style="width:185px" %)HSX1237.0～HSX1237.15|(% style="width:191px" %)HSX1245.0～HSX1245.15
1490 |(% colspan="1" rowspan="16" style="width:135px" %)7|(% style="width:102px" %)0～15|(% style="width:185px" %)HSX646.0～HSX646.15|(% style="width:191px" %)HSX654.0～HSX654.15
1491 |(% style="width:102px" %)16～31|(% style="width:185px" %)HSX647.0～HSX647.15|(% style="width:191px" %)HSX655.0～HSX655.15
1492 |(% style="width:102px" %)32～47|(% style="width:185px" %)HSX648.0～HSX648.15|(% style="width:191px" %)HSX656.0～HSX656.15
1493 |(% style="width:102px" %)48～63|(% style="width:185px" %)HSX649.0～HSX649.15|(% style="width:191px" %)HSX657.0～HSX657.15
1494 |(% style="width:102px" %)64～79|(% style="width:185px" %)HSX650.0～HSX650.15|(% style="width:191px" %)HSX658.0～HSX658.15
1495 |(% style="width:102px" %)80～95|(% style="width:185px" %)HSX651.0～HSX651.15|(% style="width:191px" %)HSX659.0～HSX659.15
1496 |(% style="width:102px" %)96～111|(% style="width:185px" %)HSX652.0～HSX652.15|(% style="width:191px" %)HSX660.0～HSX660.15
1497 |(% style="width:102px" %)112～127|(% style="width:185px" %)HSX653.0～HSX653.15|(% style="width:191px" %)HSX661.0～HSX661.15
1498 |(% style="width:102px" %)128～143|(% style="width:185px" %)HSX1246.0～HSX1246.15|(% style="width:191px" %)HSX1254.0～HSX1254.15
1499 |(% style="width:102px" %)144～159|(% style="width:185px" %)HSX1247.0～HSX1247.15|(% style="width:191px" %)HSX1255.0～HSX1255.15
1500 |(% style="width:102px" %)160～175|(% style="width:185px" %)HSX1248.0～HSX1248.15|(% style="width:191px" %)HSX1256.0～HSX1256.15
1501 |(% style="width:102px" %)176～191|(% style="width:185px" %)HSX1249.0～HSX1249.15|(% style="width:191px" %)HSX1257.0～HSX1257.15
1502 |(% style="width:102px" %)192～207|(% style="width:185px" %)HSX1250.0～HSX1250.15|(% style="width:191px" %)HSX1258.0～HSX1258.15
1503 |(% style="width:102px" %)208～223|(% style="width:185px" %)HSX1251.0～HSX1251.15|(% style="width:191px" %)HSX1259.0～HSX1259.15
1504 |(% style="width:102px" %)224～239|(% style="width:185px" %)HSX1252.0～HSX1252.15|(% style="width:191px" %)HSX1260.0～HSX1260.15
1505 |(% style="width:102px" %)240～255|(% style="width:185px" %)HSX1253.0～HSX1253.15|(% style="width:191px" %)HSX1261.0～HSX1261.15
1506 |(% colspan="1" rowspan="16" style="width:135px" %)8|(% style="width:102px" %)0～15|(% style="width:185px" %)HSX662.0～HSX662.15|(% style="width:191px" %)HSX670.0～HSX670.15
1507 |(% style="width:102px" %)16～31|(% style="width:185px" %)HSX663.0～HSX663.15|(% style="width:191px" %)HSX671.0～HSX671.15
1508 |(% style="width:102px" %)32～47|(% style="width:185px" %)HSX664.0～HSX664.15|(% style="width:191px" %)HSX672.0～HSX672.15
1509 |(% style="width:102px" %)48～63|(% style="width:185px" %)HSX665.0～HSX665.15|(% style="width:191px" %)HSX673.0～HSX673.15
1510 |(% style="width:102px" %)64～79|(% style="width:185px" %)HSX666.0～HSX666.15|(% style="width:191px" %)HSX674.0～HSX674.15
1511 |(% style="width:102px" %)80～95|(% style="width:185px" %)HSX667.0～HSX667.15|(% style="width:191px" %)HSX675.0～HSX675.15
1512 |(% style="width:102px" %)96～111|(% style="width:185px" %)HSX668.0～HSX668.15|(% style="width:191px" %)HSX676.0～HSX676.15
1513 |(% style="width:102px" %)112～127|(% style="width:185px" %)HSX669.0～HSX669.15|(% style="width:191px" %)HSX677.0～HSX677.15
1514 |(% style="width:102px" %)128～143|(% style="width:185px" %)HSX1262.0～HSX1262.15|(% style="width:191px" %)HSX1270.0～HSX1270.15
1515 |(% style="width:102px" %)144～159|(% style="width:185px" %)HSX1263.0～HSX1263.15|(% style="width:191px" %)HSX1271.0～HSX1271.15
1516 |(% style="width:102px" %)160～175|(% style="width:185px" %)HSX1264.0～HSX1264.15|(% style="width:191px" %)HSX1272.0～HSX1272.15
1517 |(% style="width:102px" %)176～191|(% style="width:185px" %)HSX1265.0～HSX1265.15|(% style="width:191px" %)HSX1273.0～HSX1273.15
1518 |(% style="width:102px" %)192～207|(% style="width:185px" %)HSX1266.0～HSX1266.15|(% style="width:191px" %)HSX1274.0～HSX1274.15
1519 |(% style="width:102px" %)208～223|(% style="width:185px" %)HSX1267.0～HSX1267.15|(% style="width:191px" %)HSX1275.0～HSX1275.15
1520 |(% style="width:102px" %)224～239|(% style="width:185px" %)HSX1268.0～HSX1268.15|(% style="width:191px" %)HSX1276.0～HSX1276.15
1521 |(% style="width:102px" %)240～255|(% style="width:185px" %)HSX1269.0～HSX1269.15|(% style="width:191px" %)HSX1277.0～HSX1277.15
1522 |(% rowspan="4" style="width:135px" %)9|(% style="width:102px" %)0~~15|(% style="width:185px" %)HSX678.0~~678.15|(% style="width:191px" %)HSX686.0~~686.15
1523 |(% style="width:102px" %)16~~31|(% style="width:185px" %)HSX679.0~~679.15|(% style="width:191px" %)HSX687.0~~687.15
1524 |(% style="width:102px" %)32~~47|(% style="width:185px" %)HSX680.0~~680.15|(% style="width:191px" %)HSX688.0~~688.15
1525 |(% style="width:102px" %)48~~63|(% style="width:185px" %)HSX681.0~~681.15|(% style="width:191px" %)HSX689.0~~689.15
1526 |(% rowspan="4" style="width:135px" %)10|(% style="width:102px" %)0~~15|(% style="width:185px" %)HSX694.0~~694.15|(% style="width:191px" %)HSX702.0~~702.15
1527 |(% style="width:102px" %)16~~31|(% style="width:185px" %)HSX695.0~~695.15|(% style="width:191px" %)HSX703.0~~703.15
1528 |(% style="width:102px" %)32~~47|(% style="width:185px" %)HSX696.0~~696.15|(% style="width:191px" %)HSX704.0~~704.15
1529 |(% style="width:102px" %)48~~63|(% style="width:185px" %)HSX697.0~~697.15|(% style="width:191px" %)HSX705.0~~705.15
1530 |(% rowspan="4" style="width:135px" %)11|(% style="width:102px" %)0~~15|(% style="width:185px" %)HSX710.0~~710.15|(% style="width:191px" %)HSX718.0~~718.15
1531 |(% style="width:102px" %)16~~31|(% style="width:185px" %)HSX711.0~~711.15|(% style="width:191px" %)HSX719.0~~719.15
1532 |(% style="width:102px" %)32~~47|(% style="width:185px" %)HSX712.0~~712.15|(% style="width:191px" %)HSX720.0~~720.15
1533 |(% style="width:102px" %)48~~63|(% style="width:185px" %)HSX713.0~~713.15|(% style="width:191px" %)HSX721.0~~721.15
1534 |(% rowspan="4" style="width:135px" %)12|(% style="width:102px" %)0~~15|(% style="width:185px" %)HSX726.0~~726.15|(% style="width:191px" %)HSX734.0~~734.15
1535 |(% style="width:102px" %)16~~31|(% style="width:185px" %)HSX727.0~~727.15|(% style="width:191px" %)HSX735.0~~735.15
1536 |(% style="width:102px" %)32~~47|(% style="width:185px" %)HSX728.0~~728.15|(% style="width:191px" %)HSX736.0~~736.15
1537 |(% style="width:102px" %)48~~63|(% style="width:185px" %)HSX729.0~~729.15|(% style="width:191px" %)HSX737.0~~737.15
1538 |(% rowspan="4" style="width:135px" %)13|(% style="width:102px" %)0~~15|(% style="width:185px" %)HSX742.0~~742.15|(% style="width:191px" %)HSX750.0~~750.15
1539 |(% style="width:102px" %)16~~31|(% style="width:185px" %)HSX743.0~~743.15|(% style="width:191px" %)HSX751.0~~751.15
1540 |(% style="width:102px" %)32~~47|(% style="width:185px" %)HSX744.0~~744.15|(% style="width:191px" %)HSX752.0~~752.15
1541 |(% style="width:102px" %)48~~63|(% style="width:185px" %)HSX745.0~~745.15|(% style="width:191px" %)HSX753.0~~753.15
1542 |(% rowspan="4" style="width:135px" %)14|(% style="width:102px" %)0~~15|(% style="width:185px" %)HSX758.0~~758.15|(% style="width:191px" %)HSX766.0~~766.15
1543 |(% style="width:102px" %)16~~31|(% style="width:185px" %)HSX759.0~~759.15|(% style="width:191px" %)HSX767.0~~767.15
1544 |(% style="width:102px" %)32~~47|(% style="width:185px" %)HSX760.0~~760.15|(% style="width:191px" %)HSX768.0~~768.15
1545 |(% style="width:102px" %)48~~63|(% style="width:185px" %)HSX761.0~~761.15|(% style="width:191px" %)HSX769.0~~769.15
1546 |(% rowspan="4" style="width:135px" %)15|(% style="width:102px" %)0~~15|(% style="width:185px" %)HSX774.0~~774.15|(% style="width:191px" %)HSX782.0~~782.15
1547 |(% style="width:102px" %)16~~31|(% style="width:185px" %)HSX775.0~~775.15|(% style="width:191px" %)HSX783.0~~783.15
1548 |(% style="width:102px" %)32~~47|(% style="width:185px" %)HSX776.0~~776.15|(% style="width:191px" %)HSX784.0~~784.15
1549 |(% style="width:102px" %)48~~63|(% style="width:185px" %)HSX777.0~~777.15|(% style="width:191px" %)HSX785.0~~785.15
1550 |(% rowspan="4" style="width:135px" %)16|(% style="width:102px" %)0~~15|(% style="width:185px" %)HSX790.0~~790.15|(% style="width:191px" %)HSX798.0~~798.15
1551 |(% style="width:102px" %)16~~31|(% style="width:185px" %)HSX791.0~~791.15|(% style="width:191px" %)HSX799.0~~799.15
1552 |(% style="width:102px" %)32~~47|(% style="width:185px" %)HSX792.0~~792.15|(% style="width:191px" %)HSX800.0~~800.15
1553 |(% style="width:102px" %)48~~63|(% style="width:185px" %)HSX793.0~~793.15|(% style="width:191px" %)HSX801.0~~801.15