Skip to Content

Wiki source code of 13.HMI Internal Registers

Version 29.3 by Mora Zhou on 2023/10/31 14:55
Show last authors
1 = **Introduction** =
2
3 HMI provide four types of HMI address for user. You can use them as temporary variables of the program. The use is consistent with the way access to the PLC register. You could also reference through the address, PIStudio provides three types of such memory.
4
5 *HSW, HDW, HUW, HAW are word address, HSX, HDX, HUX, HAX are bit address.
6
7 * **System data area (HSW): **A special register defined by the system.
8 * **Data storage area (HDW/HDX): **Users store user data.
9 * **System data area (HUW): **A special register defined by the system.
10 * **System Data (HAW)**: System register used for power-off save.
11 * **Recipe index area (RPW): **System register used for recipe index.
12
13 HMI internal registers are divided into bit address and word address, which can be accessed in two ways (take HDW as an example).
14
15 * Access as word with the prefix "HDW".
16 ** HDW0 means the 1st word of system data area. HDW1 means the 2nd word of system data area.
17 * Access as bit with the prefix "HDX".  The number before "." i".  The number before Access in bit with the prefix "HD".  The number before Access in bit with the prefix "HDX". The number before "." indicates the number of the word. The number after "." indicates the bit number of the word.
18 ** HDX1020.12 means to access the system data area in bit mode, the specific location is the 13th bit of the 1020 word.
19
20 (% class="box infomessage" %)
21 (((
22 **✎Note:**
23
24 * Addresses in HDX are the bits from words in HDW, so be careful when using addresses. For example, HDX1020.12 is the 13th bit to access the 1020 word. The value of this bit is the same as that of the word accessed through HDW001020. The 13th bit of this word is actually the same bit as HDX1020.12.
25 * The address of the bit address HDX is with a decimal point while word addresses are integers.
26 )))
27
28 = Address ranges table =
29
30 (% style="text-align:center" %)
31 [[image:6.png]]
32
33 = **Data storage area (HDW/HDX)** =
34
35 It is used to save the temporary data of project.
36
37 1. Access as word, and serial number range is from HDW0 to HDW299999.
38 1. Access as bit, and serial number range is from HDX0.0 to HDX299999.15.
39
40 = **Power-down save area (HAW/HAX)** =
41
42 It is system registers used for power-off save.
43
44 1. Access as word, and serial number range is from HAW0 to HAW199999.
45 1. Access as bit, and serial number range is from HAX0.0 to HAX199999.15.
46
47 (% class="box infomessage" %)
48 (((
49 **✎Note:**
50
51 * HAW/HAX is power-down retention. The register of this type is able to save the data before the power-down.
52 * To avoid possible device failure, do not immediately power off and reboot when configuring the power-down save addre
53 )))
54
55 = **Recipe index area (RPW)** =
56
57 It is system recipe data power-off save register. The range is from RPW000000 to RPW990450.
58
59 **✎Note:**
60
61 * RPW is power-down retention. The register of this type is able to save the data before the power-down.
62 * To avoid possible device failure, do not immediately power off and reboot when configuring the power-down save addre
63
64 = **Single user data area (HUW/HUX)** =
65
66 It is used for system special registers (reserved by system).
67
68 1. Access as word, and serial number range is from HUW0 to HUW1599.
69 1. Access as bit, and serial number range is from HUX0.0 to HUX1599.15.
70
71 **✎Note:**
72
73 * HUW/HUX is a system special register, so please check the system special register list during use. Please use the address specified in the table and do not use the address which is not mentioned in the table.
74
75 (% class="table-bordered" %)
76 |=**Special register address**|=**Description**|=**Function**
77 |=HUW0|Screen switch|A single terminal controls the screen switching, and all terminals do not affect each other.
78 |=HUW110~~HUW119|(% rowspan="26" %)Addresses of the built-in keyboard|The T9 input method stores the selected seria number length
79 |=HUW120~~HUW129|The T9 input method stores the selected Chinese Pinyin length
80 |=HUW135|Input method: first input
81 |=HUW136|Button: T9 Chinese Pinyin page
82 |=HUW137|Button: T9 Chinese characters page
83 |=HUW138|Button: symbol
84 |=HUW139|Button: switch
85 |=HUW140|Button: Chinese characters 1
86 |=HUW142|Button: Chinese characters 2
87 |=HUW144|Button: Chinese characters 3
88 |=HUW146|Button: Chinese characters 4
89 |=HUW148|Button: Chinese characters 5
90 |=HUW150|Button: Chinese characters 6
91 |=HUW152|Button: Chinese characters 7
92 |=HUW154|Button: Chinese characters 8
93 |=HUW156|Button: Chinese characters 9
94 |=HUW158|Button: Chinese characters 10
95 |=HUW160~~HUW169|Button: Chinese Pinyin 1
96 |=HUW170~~HUW179|Button: Chinese Pinyin 2
97 |=HUW180~~HUW189|Button: Chinese Pinyin 3
98 |=HUW190~~HUW199|Button: Chinese Pinyin 4
99 |=HUW200~~HUW699|Input method cache length
100 |=HUW700~~HUW749|Minimum value of the input method
101 |=HUW750~~HUW799|Maximum value of the input method
102 |=HUW800|Case switching of the input method
103 |=HUW801~~HUW900|Input method format cache length
104 |=HUW1000|(% rowspan="12" %)Addresses of user permission|OK (Sign in)
105 |=HUW1001|Result of operation
106 |=HUW1002~~1005|Old password
107 |=HUW1006~~1009|New password
108 |=HUW1010~~1013|Confirm password
109 |=HUW1014~~1029|New user name
110 |=HUW1030~~1157|States information of user permission
111 |=HUW1158~~1335|User name (Only or drop-down list object)
112 |=HUW1336~~1345|User name description or note
113 |=HUW1347|Hidden function configurations
114 |=HUW1348|Permission settings
115 |=HUW1349|Current user name
116 |=HUW1382|User sign in way|(((
117 * 0: Select the user name from drop-down list object for signing in
118 * 1: Enter the user name in Character Input/Display object for signing in (HUW1014)
119 )))
120 |=HUW1400|Time interval from last operation|(((
121 Shows how long the touch screen has not been clicked, in seconds. 32-bit unsigned integer
122
123 **✎Note:** Clicking by different users will only clear the corresponding register of the currently operating terminal, and the registers on other terminals (such as mobile phones, computers) will not be cleared.
124 )))
125 |=HUW1402|Keyboard note|It saves the text information of the keyboard notes when clicking object(HUW1402-HUW1433)
126 |=HUW1436|Current object level|Indicate current object security level
127
128 = **Special data area (HSW/HSX)** =
129
130 It is used for system special registers (reserved by system).
131
132 1. Access as word, and serial number range is from HSW0 to HSW49999. (HSW10000 to HSW19999 are the power-off storage areas)
133 1. Access as bit, and serial number range is from HSX0.0 to HSX49999.15.
134
135 **✎Note:**
136
137 * HSW / HSX are a system special register, so please check the system special register list during use. Please use the address specified in the table and do not use the address which is not mentioned in the table.
138 * To avoid possible device failure, do not immediately power off and reboot when configuring the power-down save address.
139
140 (% class="table-bordered" style="width:1024px" %)
141 |=(% scope="row" style="width: 160px;" %)**Address**|=(% style="width: 282px;" %)**Function**|=(% style="width: 452px;" %)**Description**
142 |=(% style="width: 160px;" %)HSW0|(% style="width:282px" %)Language switch|(% style="width:452px" %)Multiple language could be set in the project, HMI support maximum 8 languages. (Power-down save supported)
143 |=(% style="width: 160px;" %)HSW1|(% style="width:282px" %)Beep frequency (Only valid in HMI V1.0 System)|(% style="width:452px" %)Frequency range: 0~~4000
144 |=(% style="width: 160px;" %)HSW2|(% style="width:282px" %)Beep volume (Only valid in HMI V1.0 System)|(% style="width:452px" %)Volume range: 0~~80
145 |=(% style="width: 160px;" %)HSW3|(% style="width:282px" %)Beep time|(% style="width:452px" %)Unit: ms
146 |=(% style="width: 160px;" %)HSW4|(% style="width:282px" %)Beep whether enable or not|(% style="width:452px" %)(((
147 * =0: Enable.
148 * =1: Disable.
149 )))
150 |=(% style="width: 160px;" %)HSW5|(% style="width:282px" %)(((
151 Alarm indicator
152 )))|(% style="width:452px" %)(((
153 * =0: Currently no alarm or all alarms have been off.
154 * =1: Currently alarm(s) still keep in on.
155 )))
156 |=(% style="width: 160px;" %)HSW6~~HSW7|(% style="width:282px" %)Number of alarms|(% style="width:452px" %)The number of alarm (it also includes the records of alarm confirmed)
157 |=(% style="width: 160px;" %)HSW8|(% style="width:282px" %)Number of unconfirmed history alarm|(% style="width:452px" %)The number of unconfirmed history alarm
158 |=(% style="width: 160px;" %)HSW9|(% style="width:282px" %)Time out prompt|(% style="width:452px" %)(((
159 * =0: Enable
160 * =1: Disable
161 )))
162 |=(% style="width: 160px;" %)HSW12|(% style="width:282px" %)Screen swicth|(% style="width:452px" %)(((
163 * = 0: Only HSW control the screen switch, and the sreens of all users will switch.
164 * = 1: Only HUW control the screen switch, and all users do not affect each other.
165 )))
166 |=(% style="width: 160px;" %)HSW13|(% style="width:282px" %)Screen switch register|(% style="width:452px" %)Equal to different values, the screen jumps to the corresponding screen number of the screen.
167 |=(% style="width: 160px;" %)HSW24|(% style="width:282px" %)Reboot HMI|=(% style="width: 452px;" %)1: Reboot
168 |=(% style="width: 160px;" %)HSW28|(% style="width:282px" %)Local time: year|(% style="width:452px" %)Range: 0~~9999 (system reserved)
169 |=(% style="width: 160px;" %)HSW29|(% style="width:282px" %)Local time: month|(% style="width:452px" %)Range: 01~~12 (system reserved)
170 |=(% style="width: 160px;" %)HSW30|(% style="width:282px" %)Local time: day|(% style="width:452px" %)Range: 01~~31 (system reserved)
171 |=(% style="width: 160px;" %)HSW31|(% style="width:282px" %)Local time: hour|(% style="width:452px" %)Range: 0~~23 (system reserved)
172 |=(% style="width: 160px;" %)HSW32|(% style="width:282px" %)Local time: minute|(% style="width:452px" %)Range: 0~~59 (system reserved)
173 |=(% style="width: 160px;" %)HSW33|(% style="width:282px" %)Local time: second|(% style="width:452px" %)Range: 0~~59 (system reserved)
174 |=(% style="width: 160px;" %)HSW34|(% style="width:282px" %)Local time: week|(% style="width:452px" %)(((
175 * =0: Sunday.
176 * =1: Monday.
177 * =2: Tuesday.
178 * =3: Wednesday.
179 * =4: Thursday.
180 * =5: Friday.
181 * =6: Saturday.
182 )))
183 |=(% style="width: 160px;" %)HSW39|(% style="width:282px" %)Beep type(Only valid in HMI V2.0 System)|(% style="width:452px" %)Type range: 1-5, Default is 1.
184 |=(% style="width: 160px;" %)HSW134|(% style="width:282px" %)(((
185 Whether the Script is read through
186
187
188 )))|(% style="width:452px" %)(((
189 **✎Note:** If want to read-only or write-only, please enable this settings.
190
191 * =0: Read from HMI cache(Default)
192 * =1: Read from PLC directly
193 )))
194 |=(% style="width: 160px;" %)HSW135|(% style="width:282px" %)Confirm installment password|(% style="width:452px" %)Confirm button for installment password
195 |=(% style="width: 160px;" %)HSW151|(% style="width:282px" %)Installment due|(% style="width:452px" %)Number of days to installment due
196 |=(% style="width: 160px;" %)HSW185~~200|(% style="width:282px" %)Installment password|(% style="width:452px" %)Enter installment password
197 |=(% style="width: 160px;" %)HSW242|(% style="width:282px" %)(((
198 Prompt result of recipe operation
199
200 * Upload: Data is written from address to file
201 * Download: Data is written from a file to an address
202 )))|(% style="width:452px" %)(((
203 * =1: Download recipe, start
204 * =2: Download recipe, execution error
205 * =3: Download recipe, files don't exist
206 * =4: Download recipe, members don't exist
207 * =5: Download recipe, groups don't exist
208 * =6: Download recipe, success
209 * =7: Upload recipe, start
210 * =8: Upload recipe, execution error
211 * =9: Upload recipe, files don't exist
212 * =10: Upload recipe, members don't exist
213 * =11: Upload recipe, groups don't exist
214 * =12: Upload recipe, success
215 * =13: Insert recipe, start
216 * =14: Insert recipe, execution error
217 * =15: Insert recipe, files don't exist
218 * =16: Insert recipe, members don't exist
219 * =17: Insert recipe, groups don't exist
220 * =18: Insert recipe, success
221 * =19: Delete recipe, start
222 * =20: Delete recipe, execution error
223 * =21: Delete recipe, files don't exist
224 * =22: Delete recipe, members don't exist
225 * =23: Delete recipe, groups don't exist
226 * =24: Delete recipe, success
227 * =25: Delete and sort recipe, start
228 * =26: Delete recipe and sort, execution error
229 * =27: Delete recipe and sort, files don't exist
230 * =28: Delete recipe and sort, members don't exist
231 * =29: Delete recipe and sort, groups don't exist
232 * =30: Delete recipe and sort, success
233 * =37: CSV recipe files import successfully
234 * =38: CSV recipe files import failed.
235 )))
236 |=(% style="width: 160px;" %)HSW243|(% style="width:282px" %)Prompt result of recipe index|(% style="width:452px" %)(((
237 * =31: Recipe index, start
238 * =32: Recipe index, execution error
239 * =33: Recipe index, files don't exist
240 * =34: Recipe index, members don't exist
241 * =35: Recipe index, groups don't exist
242 * =36: Recipe index, success
243 )))
244 |=(% style="width: 160px;" %)HSW521|(% style="width:282px" %)Delete graph and alarm record|(% style="width:452px" %)(((
245 * =0: No operation
246 * =1: HSX521.0=1, delete all records.
247 * =2: HSX521.1=1, delete all trend graph.
248 * =4: HSX521.2=1, delete all alarms.
249 * =16: HSX521.4=1, delete history XY plot.
250 * =32: HSX521.5=1, delete data records in SD card or USB flash disk;(Please make a setting which is saved to USB flash disk or SD card in project setting).
251 * =64: HSX521.6=1, delete alarms records in SD card or USB flash disk; (Please make a setting which is saved to USB flash disk or SD card in project setting).
252 )))
253 |=(% style="width: 160px;" %)HSW522|(% style="width:282px" %)Copy and paste the alarm/data files in flash to the USB flash disk|(% style="width:452px" %)(((
254 * =0: No operation
255 * =1: HSX522.0=1, copy all record
256 * =2: HSX522.2=1, copy history XY trend graph
257 * =8: HSX522.3=1, copy alarm record
258 * =32: HSX522.5=1, copy recipe
259 )))
260 |=(% style="width: 160px;" %)HSW523|(% style="width:282px" %)Copy and paste the alarm/data files in flash to the SD card|(% style="width:452px" %)(((
261 * =0: No operation
262 * =1: HSX523.0=1, copy all record
263 * =4: HSX523.2=1, copy history XY trend graph
264 * =8: HSX523.3=1, copy alarm record
265 )))
266 |=(% style="width: 160px;" %)HSW524|(% style="width:282px" %)Copy and paste the alarm/data files in SD card to the USB flash disk|(% style="width:452px" %)(((
267 * =0: no operation
268 * =4: HSX524.2=1, copy history XY trend graph
269 * =8: HSX524.3=1, copy alarm record
270 * =16: HSX524.4=1, copy history alarm record
271 * =32: HSX524.5=1, copy data record
272 )))
273 |=(% style="width: 160px;" %)HSW525|(% style="width:282px" %)Copy and paste the alarm/data files in USB flash disk to SD card|(% style="width:452px" %)(((
274 * =0: no operation
275 * =4: HSX525.2=1, copy history XY trend graph
276 * =8: HSX525.3=1, copy alarm record
277 * =16: HSX525.4=1, copy history alarm record
278 * =32: HSX525.5= 1, copy data record
279 )))
280 |=(% style="width: 160px;" %)HSW526|(% style="width:282px" %)Delete file list|(% style="width:452px" %)(((
281 * =0: no operation
282 * =1: HSX526.0=1, delete designated file
283 * =2: HSX526.1=1, delete all files
284 )))
285 |=(% style="width: 160px;" %)HSW527|(% style="width:282px" %)Eject USB flash disk/SD card|(% style="width:452px" %)(((
286 * =0: No operation
287 * =1: Eject USB flash disk
288 * =2: Eject SD card
289 )))
290 |=(% style="width: 160px;" %)HSW528|(% style="width:282px" %)The state of USB flash disk|(% style="width:452px" %)(((
291 * =1: USB flash disk is detected
292 * =2: Ejecting USB flash disk, please waiting…
293 * =3: USB flash disk ejected
294 )))
295 |=(% style="width: 160px;" %)HSW529|(% style="width:282px" %)The state of SD card|(% style="width:452px" %)(((
296 * =1: SD card is detected
297 * =2: Ejecting SD card, please waiting…
298 * =3: SD card ejected
299 )))
300 |=(% style="width: 160px;" %)HSW550~~849|(% style="width:282px" %)Communication control|(% style="width:452px" %)For communication control and communication lamp (please refer to "[[communication control>>http://13.229.109.52:8080/wiki/pistudio/view/Helps/13.HMI%20internal%20registers/#HCommunicationcontrol]]" sector for detailed)
301 |=(% style="width: 160px;" %)HSW850|(% style="width:282px" %)(((
302 Network state
303
304 (4G, WIFI and Ethernet)
305 )))|(% style="width:452px" %)(((
306 In HMI V1.0
307
308 * =0: Network is disconnected.
309 * =1: only LAN connected, and APP can't access HMI.
310 * =2: WECON Cloud connected , APP and web could access HMI.
311
312 In HMI V2.0
313
314 * =0: Network is disconnected.
315 * =1: Network is connected.
316 )))
317 |=(% style="width: 160px;" %)HSW855|(% style="width:282px" %)Backlight Control|(% style="width:452px" %)(((
318 * HSX855.0=1: turn on the backlight and reset automatically after being triggered.
319 * HSX855.1=1: turn off the backlight and reset automatically after being triggered.
320 )))
321 |=(% style="width: 160px;" %)HSW856|(% style="width:282px" %)Whether to close the indirect screen when the current screen is switched to the other screen)|(% style="width:452px" %)(((
322 * =0: close the sub-screen, including the indirect screen;
323 * =1: not to close.
324 )))
325 |=(% style="width: 160px;" %)HSW857|(% style="width:282px" %)Permission in remote access (web page, mobile APP, cloud platform, etc.)|(% style="width:452px" %)(((
326 * =0: users could switch the screen, control the switch and update data in remote access.
327 * =1: users could only control function switch (only switch the screen), view data and switch state, but could not operate or update them.
328 * =2: users could neither operate the screen switch, nor switch operation and data modification, only view. (The ig series and 8000/9000 series with -R after system upgrade)
329 )))
330 |=(% style="width: 160px;" %)HSW860~~861|(% style="width:282px" %)Data partition remaining space|(% style="width:452px" %)Display the data partition remaining space, updated every minute, unit(**kB**)
331 |=(% style="width: 160px;" %)HSW880|(% style="width:282px" %)Enable data partition remaining space|(% style="width:452px" %)(((
332 ~=1, able to view the data partition remaining space from HSW860~~861.
333
334 ~=Other value except 1, disable the viewing function.
335 )))
336 |=(% style="width: 160px;" %)HSW881|(% style="width:282px" %)Storage of Record files|(% style="width:452px" %)(((
337 It is used for controlling saving alarm/data record files to U disk / SD card.
338
339 * = 0: Save to storage.
340 * = 1: Don't save to storage.
341 )))
342 |=(% style="width: 160px;" %)HSW882|(% style="width:282px" %)Storage device status|(% style="width:452px" %)(((
343 * HDX882.0=0 USB flash doesn't execute storage or storage finished.
344 * HDX882.0=1 USB flash is reading data, don't remove USB flash.
345 * HDX882.1=0 SD card doesn't execute storage or storage finished.
346 * HDX882.1=1 SD card is reading data, don't remove SD card.
347 )))
348 |=(% style="width: 160px;" %)HSW884|(% style="width:282px" %)Enter the system network configuration interface|(% style="width:452px" %)(((
349 * =0: Do not enter the network configuration interface
350 * =1: Enter the system network configuration interface.
351 ** ig series HMI only supports to enter the system interface
352
353 )))
354 |=(% style="width: 160px;" %)HSW885|(% style="width:282px" %)When the control object hides the address is read failed (communication failure), set the display mode of the object|(% style="width:452px" %)(((
355 * = 0: displayed by object setting.
356 * =1: control address read failure, the address control of all objects is hidden, not displayed.
357 * =2: control address read failure, the address control of all objects is displayed, not hidden.
358 )))
359 |=(% style="width: 160px;" %)HSW893|(% style="width:282px" %)(((
360 User Permission Control Address, same as HUW1000 feature, please refer to chapter "[[User Permission>>http://13.229.109.52:8080/wiki/pistudio/view/Helps/08.Basic%20Function/#HUserPermission]]"
361
362 **✎Note: **This address can only take effect when it is operated in the real HMI, and the operation is invalid on Web/App side.
363 )))|(% style="width:452px" %)(((
364 * =1: User Log in
365 * =2: Change User password
366 * =3: User Log out
367 * =4: New user
368 * =5: Delete user
369 * =6: Add user rights
370 * =8: Add Hide features
371 * =9: Delete Profile
372 * =10: Export Profile
373 * =11: Import profile
374 * =12: Export log file
375 * =13: Delete log file
376 )))
377 |=(% style="width: 160px;" %)HSW900|(% style="width:282px" %)Quick update frequency settings for objects|(% style="width:452px" %)(((
378 Valid when the object is enabled for "quick update". Default: 5.
379
380 Range: 1 (fastest) ~~ 50 (slowest)
381 )))
382 |=(% style="width: 160px;" %)HSW920|(% style="width:282px" %)Static mode Maximum periods|(% style="width:452px" %)Numeric Input/ Display (range: 0-12)
383 |=(% style="width: 160px;" %)HSW921 ~~ 924|(% style="width:282px" %)Static mode Admin key|(% style="width:452px" %)Character Input/ Display (length: 8)
384 |=(% style="width: 160px;" %)HSW925 ~~ 928|(% style="width:282px" %)1^^st^^ period key (Static mode)|(% style="width:452px" %)Character Input/ Display (length: 8)
385 |=(% style="width: 160px;" %)HSW929 ~~ 933|(% style="width:282px" %)1^^st^^ expiry time (Static mode)|(% style="width:452px" %)Numeric Input/ Display (YYYYMMDDHHMM)
386 |=(% style="width: 160px;" %)HSW935 ~~ 938|(% style="width:282px" %)2^^nd^^ period key (Static mode)|(% style="width:452px" %)Character Input/ Display (length: 8)
387 |=(% style="width: 160px;" %)HSW939 ~~ 943|(% style="width:282px" %)2^^nd ^^expiry time (Static mode)|(% style="width:452px" %)Numeric Input/ Display (YYYYMMDDHHMM)
388 |=(% style="width: 160px;" %)HSW945 ~~ 948|(% style="width:282px" %)3^^rd^^ period key (Static mode)|(% style="width:452px" %)Character Input/ Display (length: 8)
389 |=(% style="width: 160px;" %)HSW949 ~~ 953|(% style="width:282px" %)3^^rd ^^expiry time (Static mode)|(% style="width:452px" %)Numeric Input/ Display (YYYYMMDDHHMM)
390 |=(% style="width: 160px;" %)HSW955 ~~ 958|(% style="width:282px" %)4^^th^^ period key (Static mode)|(% style="width:452px" %)Character Input/ Display (length: 8)
391 |=(% style="width: 160px;" %)HSW959 ~~ 963|(% style="width:282px" %)4^^th ^^expiry time (Static mode)|(% style="width:452px" %)Numeric Input/ Display (YYYYMMDDHHMM)
392 |=(% style="width: 160px;" %)HSW965 ~~ 968|(% style="width:282px" %)5^^th^^ period key (Static mode)|(% style="width:452px" %)Character Input/ Display (length: 8)
393 |=(% style="width: 160px;" %)HSW969 ~~ 973|(% style="width:282px" %)5^^th ^^expiry time (Static mode)|(% style="width:452px" %)Numeric Input/ Display (YYYYMMDDHHMM)
394 |=(% style="width: 160px;" %)HSW975 ~~ 978|(% style="width:282px" %)6^^th^^ period key (Static mode)|(% style="width:452px" %)Character Input/ Display (length: 8)
395 |=(% style="width: 160px;" %)HSW979 ~~ 983|(% style="width:282px" %)6^^th ^^expiry time (Static mode)|(% style="width:452px" %)Numeric Input/ Display (YYYYMMDDHHMM)
396 |=(% style="width: 160px;" %)HSW985 ~~ 988|(% style="width:282px" %)7^^th^^ period key (Static mode)|(% style="width:452px" %)Character Input/ Display (length: 8)
397 |=(% style="width: 160px;" %)HSW989 ~~ 993|(% style="width:282px" %)7^^th ^^expiry time (Static mode)|(% style="width:452px" %)Numeric Input/ Display (YYYYMMDDHHMM)
398 |=(% style="width: 160px;" %)HSW995 ~~ 998|(% style="width:282px" %)8^^th^^ period key (Static mode)|(% style="width:452px" %)Character Input/ Display (length: 8)
399 |=(% style="width: 160px;" %)HSW999 ~~ 1003|(% style="width:282px" %)8^^th ^^expiry time (Static mode)|(% style="width:452px" %)Numeric Input/ Display (YYYYMMDDHHMM)
400 |=(% style="width: 160px;" %)HSW1005 ~~1008|(% style="width:282px" %)9^^th^^ period key (Static mode)|(% style="width:452px" %)Character Input/ Display (length: 8)
401 |=(% style="width: 160px;" %)HSW1009 ~~ 1013|(% style="width:282px" %)9^^th ^^expiry time (Static mode)|(% style="width:452px" %)Numeric Input/ Display (YYYYMMDDHHMM)
402 |=(% style="width: 160px;" %)HSW1015 ~~1018|(% style="width:282px" %)10^^th^^ period key (Static mode)|(% style="width:452px" %)Character Input/ Display (length: 8)
403 |=(% style="width: 160px;" %)HSW1019 ~~ 1023|(% style="width:282px" %)10^^th ^^expiry time (Static mode)|(% style="width:452px" %)Numeric Input/ Display (YYYYMMDDHHMM)
404 |=(% style="width: 160px;" %)HSW1025 ~~1028|(% style="width:282px" %)11^^th^^ period key (Static mode)|(% style="width:452px" %)Character Input/ Display (length: 8)
405 |=(% style="width: 160px;" %)HSW1029 ~~ 1033|(% style="width:282px" %)11^^th ^^expiry time (Static mode)|(% style="width:452px" %)Numeric Input/ Display (YYYYMMDDHHMM)
406 |=(% style="width: 160px;" %)HSW1035 ~~1038|(% style="width:282px" %)12^^th^^ period key (Static mode)|(% style="width:452px" %)Character Input/ Display (length: 8)
407 |=(% style="width: 160px;" %)HSW1039 ~~ 1043|(% style="width:282px" %)12^^th ^^expiry time (Static mode)|(% style="width:452px" %)Numeric Input/ Display (YYYYMMDDHHMM)
408 |=(% style="width: 160px;" %)HSW1046|(% style="width:282px" %)Current period (Static mode)|(% style="width:452px" %)Current period (Range 1-13)
409 |=(% style="width: 160px;" %)HSW1047|(% style="width:282px" %)Save settings (Static mode)|(% style="width:452px" %)(((
410 * HSX1047.0=1: Save static installment information
411 * HSX1047.1=1: Write installment information to registers
412 )))
413 |=(% style="width: 160px;" %)HSW1050~~HSW1065|(% style="width:282px" %)The recipe name that can input csv format|(% style="width:452px" %)Input CSV format recipe file name through "Character Input/ Display".(This function should be used in combination with the recipefunction)
414 |=(% style="width: 160px;" %)HSW1066|(% style="width:282px" %)Configure the type of the CSV file imported|(% style="width:452px" %)(((
415 The CSV file type imported (This function should be used in combination with the recipe function)
416
417 * =0: Import customed CSV file. The data in the file is valid.
418 * =1: Import ordinary recipe files of regular series HMI. The 1st row of the file is invalid.
419 * =2: Import special recipe files of regular series HMI. The 1st and 3nd rows and the 1st colume of the file is invalid.
420 )))
421 |=(% style="width: 160px;" %)HSW1067|(% style="width:282px" %)Location where the CSV file is saved|(% style="width:452px" %)(((
422 Set the path of CSV file (This function should be used in combination with the recipe function)
423
424 * =0: In the CsvFile directory of the USB stick
425 * =1: In the CsvFile directory of the SD card
426 )))
427 |=(% style="width: 160px;" %)HSW1070|(% style="width:282px" %)The time interval (seconds) since the last time the screen was clicked|(% style="width:452px" %)(((
428 Shows how long the current screen has not been clicked, using a decimal unsigned double word (Numeric Input/ Display).
429
430 **✎Note: **This register is cleared to zero regardless of which user clicks on the screen.
431 )))
432 |=(% style="width: 160px;" %)HSW1073|(% style="width:282px" %)Corresponding key value from keyboard|(% style="width:452px" %)Display the key value of the currently pressed key, the key value is shown in Table 1 (not updated when the character input display is being input)
433 |=(% style="width: 160px;" %)HSW1074|(% style="width:282px" %)Keyboard key status|(% style="width:452px" %)Display the current button status (not updated when the numeric input display is being input)(((
434 * =0: key release
435 * =1: key press
436 * =2: Long press the button
437 )))
438 |=(% style="width: 160px;" %)HSW1075|(% style="width:282px" %)Cursor speed|(% style="width:452px" %)Control the cursor movement speed, the range is 0～100, the default is 20
439 |=(% style="width: 160px;" %)HSW1076|(% style="width:282px" %)Cursor x coordinate value|(% style="width:452px" %)Record the x value at the current position of the cursor, range: 0 to screen width -1
440 |=(% style="width: 160px;" %)HSW1077|(% style="width:282px" %)Cursor y coordinate value|(% style="width:452px" %)Record the y value at the current position of the cursor, range: 0 to screen height-1
441 |=(% style="width: 160px;" %)HSW1078|(% style="width:282px" %)Corresponding ASCII code for keyboard keys|(% style="width:452px" %)Only the ASCII value of letters, numbers, and symbols are displayed, and the ASCII value of the function button is not displayed.
442 |=(% style="width: 160px;" %)HSW1079|(% style="width:282px" %)Trigger to set the cursor position and set the Enter key mode|(% style="width:452px" %)(((
443 * HSX1079.0=1: Set the cursor position according to the cursor xy register value;
444 * HSX1079.1=0: When the numeric/character input display is being input, press Enter to end the input, no value/text part is being input, Enter is a normal click;
445 * HSX1079.1=1 Regardless of whether the numeric/character component is inputting the Enter key, only normal click is performed, and the keyboard end input is not performed.
446 )))
447 |=(% style="width: 160px;" %)HSW1083|(% style="width:282px" %)Naming method for printing object screenshots|(% style="width:452px" %)(((
448 Example: The time is 2019-01-04 14:29:10 (523 milliseconds), the screen number is 0, and the object ID is 2.
449
450 * =0: Use year, month, day, hour, minute, second, millisecond, screen number, part number to name, such as: 2019010414291052302.bmp.
451 * =1: Name using year, month, day, hour, minute, and second.
452
453 For example: 20190104142910.bmp.
454 )))
455 |=(% style="width: 160px;" %)HSW1086|(% style="width:282px" %)Control address mapping polling cycle, unit: ms|(% style="width:452px" %)(((
456 Address mapping polling cycle, effective range: 40~~1000ms, default: 300ms.
457
458 * When the set value is greater than 1000, the value is 1000.
459 * When the set value is lower than 40, it changes to the default value 300
460 )))
461 |=(% style="width: 160px;" %)HSW1087|(% style="width:282px" %)Control write interval in address mapping|(% style="width:452px" %)(((
462 After reading data to the device for N times, Perform an address mapping write operation. N is the interval value. The effective range: 0~~5, and default is 2.
463
464 When N more than 5, it is 5.
465
466 0 is the fastest and 5 is the slowest.
467 )))
468 |=(% style="width: 160px;" %)HSW1088|(% style="width:282px" %)Control the write interval of script|(% style="width:452px" %)(((
469 After reading data to the device for N times, Perform a script write operation. N is the interval value. The effective range: 0~~5, and default is 2.
470
471 When N more than 5, it is 5.
472
473 0 is the fastest and 5 is the slowest.
474 )))
475 |=(% style="width: 160px;" %)HSW1089|(% style="width:282px" %)Control interval of read through|(% style="width:452px" %)(((
476 After reading data to the device for N times, Perform a read through operation. N is the interval value. The effective range: 0~~5, and default is 2.
477
478 When N more than 5, it is 5.
479
480 0 is the fastest and 5 is the slowest.
481 )))
482 |=(% style="width: 160px;" %)HSW1100|(% colspan="1" rowspan="4" style="width:282px" %)Set the Master IP for Multi-link|(% style="width:452px" %)High word 1 for Master IP address of multi-link
483 |=(% style="width: 160px;" %)HSW1101|(% style="width:452px" %)High word 2 for Master IP address of multi-link
484 |=(% style="width: 160px;" %)HSW1102|(% style="width:452px" %)High word 3 for Master IP address of multi-link
485 |=(% style="width: 160px;" %)HSW1103|(% style="width:452px" %)High word 4 for Master IP address of multi-link
486 |=(% style="width: 160px;" %)HSW1104|(% style="width:282px" %)Control connection to Master or not for Multi-link slave device|(% style="width:452px" %)(((
487 * =1: Connect to the Master
488 * =0: Do not connect to Master
489 )))
490 |=(% style="width: 160px;" %)HSW1141|(% style="width:282px" %)Release alarm|(% style="width:452px" %)(((
491 * =0, Default value
492 * =1, Release the alarm generated before the last power-down when starting up
493 )))
494 |=(% style="width: 160px;" %)HSW1200|(% colspan="1" rowspan="2" style="width:282px" %)TSAP settings for HMI in the Siemens LOGO! 8 protocol(ig series or HMI V2.0)|(% style="width:452px" %)HMI local TSAP, which corresponds to the remote TSAP of PLC
495 |=(% style="width: 160px;" %)HSW1201|(% style="width:452px" %)HMI remote TSAP, which corresponds to the local TSAP of PLC
496 |=(% style="width: 160px;" %)HSW1450|(% style="width:282px" %)Enable objects level password function|(% style="width:452px" %)(((
497 * =0, Disable
498 * =1, Enable
499 )))
500 |=(% style="width: 160px;" %)HSW1451|(% style="width:282px" %)Whether the object level passwords are independent of each other|(% style="width:452px" %)(((
501 * =0, No, high-level passwords can unlock low-level
502 * = 1, Yes, high-level passwords cannot unlock low-level
503 )))
504 |=(% style="width: 160px;" %)HSW1452|(% style="width:282px" %)Initialization level|(% style="width:452px" %)Initialization level while HMI running
505 |=(% style="width: 160px;" %)HSW1454~~1457|(% style="width:282px" %)Password for Level 1|(% style="width:452px" %)(((
506 Display password for level 1, using character input object, up to 8 characters (numbers, letters (case sensitive))
507 )))
508 |=(% style="width: 160px;" %)HSW1458~~1461|(% style="width:282px" %)Password for Level 2|(% style="width:452px" %)Display password for level 2, using character input object, up to 8 characters (numbers, letters (case sensitive))
509 |=(% style="width: 160px;" %)HSW1462~~1465|(% style="width:282px" %)Password for Level 3|(% style="width:452px" %)Display password for level 3, using character input object, up to 8 characters (numbers, letters (case sensitive))
510 |=(% style="width: 160px;" %)HSW1466~~1469|(% style="width:282px" %)Password for Level 4|(% style="width:452px" %)Display password for level 4, using character input object, up to 8 characters (numbers, letters (case sensitive))
511 |=(% style="width: 160px;" %)HSW1470~~1473|(% style="width:282px" %)Password for Level 5|(% style="width:452px" %)Display password for level 5, using character input object, up to 8 characters (numbers, letters (case sensitive))
512 |=(% style="width: 160px;" %)HSW1474~~1477|(% style="width:282px" %)Password for Level 6|(% style="width:452px" %)Display password for level 6, using character input object, up to 8 characters (numbers, letters (case sensitive))
513 |=(% style="width: 160px;" %)HSW1478~~1481|(% style="width:282px" %)Password for Level 7|(% style="width:452px" %)Display password for level 7, using character input object, up to 8 characters (numbers, letters (case sensitive))
514 |=(% style="width: 160px;" %)HSW1482~~1485|(% style="width:282px" %)Password for Level 8|(% style="width:452px" %)Display password for level 8, using character input object, up to 8 characters (numbers, letters (case sensitive))
515 |=(% style="width: 160px;" %)HSW1486~~1489|(% style="width:282px" %)Password for Level 9|(% style="width:452px" %)Display password for level 9, using character input object, up to 8 characters (numbers, letters (case sensitive))
516 |=(% style="width: 160px;" %)HSW1490~~1493|(% style="width:282px" %)Password for Level 10|(% style="width:452px" %)Display password for level 10, using character input object, up to 8 characters (numbers, letters (case sensitive))
517 |=(% style="width: 160px;" %)HSW1494~~1497|(% style="width:282px" %)Password for Level 11|(% style="width:452px" %)Display password for level 11, using character input object, up to 8 characters (numbers, letters (case sensitive))
518 |=(% style="width: 160px;" %)HSW1498~~1501|(% style="width:282px" %)Password for Level 12|(% style="width:452px" %)Display password for level 12, using character input object, up to 8 characters (numbers, letters (case sensitive))
519 |=(% style="width: 160px;" %)HSW1502|(% style="width:282px" %)Modify password for object level|(% style="width:452px" %)(((
520 * HSX1502.0=1: Modification comfirmed. Save the data of HSW1450~~HSW1501 to a file for immediate effect.
521 * HSX1502.1=1:Modification cancelled. Restore the current data of hSW1450-HSW1501 to the data saved in the file last time.
522 )))
523 |=(% style="width: 160px;" %)HSW1509|(% style="width:282px" %)Curve width|(% style="width:452px" %)(((
524 * =0: Use the curve width set by project default.
525 * =1 to 10: use special register to set curve width.
526 )))
527 |=(% style="width: 160px;" %)HSW1603|(% style="width:282px" %)Number of current unreleased alarms|(% style="width:452px" %)The number of current unreleased alarms in alarm record file.
528 |=(% style="width: 160px;" %)HSW1604|(% style="width:282px" %)The auxiliary judgment address when the control bit in the Object Lock fails to be read|(% style="width:452px" %)(((
529 * =0: The auxiliary address is invalid.
530 * =1: When the communication fails, lock the object.
531 * =2: When the communication fails, unlock the object.
532 * =Others: The auxiliary address is invalid.
533 )))
534 |=(% style="width: 160px;" %)HSW1605|(% style="width:282px" %)BCD format natural decimal control|(% style="width:452px" %)(((
535 Whether to display natural decimals with decimal point in BCD format:
536
537 * 0=Not enabled.
538 * 1=Enable.
539
540 (For example, 56.20 is displayed as 56.2, 33.00 is displayed as 33)
541 )))
542 |=(% style="width: 160px;" %)HSW1606|(% style="width:282px" %)User permission modification control|(% style="width:452px" %)(((
543 * =0: Ordinary users are allowed to modify permissions and other operations
544 * =1: Only the administrator can operate (default is 0)
545 )))
546 |=(% style="width: 160px;" %)HSW1607|(% style="width:282px" %)The spacing value among the drop-down items of the drop-down list|(% style="width:452px" %)10 to 50 is effective, such as: 23 is 2.3 times the height of the object.
547 |=(% style="width: 160px;" %)HSW1611|(% style="width:282px" %)(((
548 Traditional recipe transfer
549 )))|(% style="width:452px" %)(((
550 * =1: download traditional recipe.
551 * =2: upload the traditional recipe.
552 )))
553 |=(% style="width: 160px;" %)HSW1612|(% style="width:282px" %)Traditional Recipe group number|(% style="width:452px" %)Traditional Recipe group number
554 |=(% style="width: 160px;" %)HSW1613|(% style="width:282px" %)Display the status of network card|(% style="width:452px" %)(((
555 * =1: Normal
556 * =Others: Abnormal
557 )))
558 |=(% style="width: 160px;" %)HSW1614~~1623|(% style="width:282px" %)Download speed per second|(% style="width:452px" %)Display the download speed per second. (The value is string)
559 |=(% style="width: 160px;" %)HSW1624~~1633|(% style="width:282px" %)Upnload speed per second|(% style="width:452px" %)Display the upload speed per second. (The value is string)
560 |=(% style="width: 160px;" %)HSW1634~~1643|(% style="width:282px" %)Flow consumption rate|(% style="width:452px" %)Display the total flow rate per second (The value is string)
561 |=(% style="width: 160px;" %)HSW1644~~1653|(% style="width:282px" %)Download flow consumption after power on|(% style="width:452px" %)Display the download flow consumption after power on (The value is string)
562 |=(% style="width: 160px;" %)HSW1654~~1663|(% style="width:282px" %)Upload flow consumption after power on|(% style="width:452px" %)Display the upload flow consumption after power on (The value is string)
563 |=(% style="width: 160px;" %)HSW1664~~1673|(% style="width:282px" %)Total flow consumption after power on|(% style="width:452px" %)Display the total flow consumption after power on (download and upload). (The value is string)
564 |=(% style="width: 160px;" %)HSW1674~~1683|(% style="width:282px" %)Historical flow consumption|(% style="width:452px" %)Display historical flow consumption (download and upload). (The value is string)
565 |=(% style="width: 160px;" %)HSW1684~~1693|(% style="width:282px" %)Flow consumption in 10 minutes|(% style="width:452px" %)Flow consumption in 10 minutes (download and upload). (The value is string)
566 |=(% style="width: 160px;" %)HSW1694~~1703|(% style="width:282px" %)Flow consumption in 30 minutes|(% style="width:452px" %)Flow consumption in 30 minutes (download and upload). (The value is string)
567 |=(% style="width: 160px;" %)HSW1704~~1713|(% style="width:282px" %)Flow consumption in 3 hours|(% style="width:452px" %)Flow consumption in 3 hours (download and upload). (The value is string)
568 |=(% style="width: 160px;" %)HSW1715|(% style="width:282px" %)Reset flow|(% style="width:452px" %)(((
569 * =1: Clear historical flow data and restart the count.
570 * =Others: Invalid
571 )))
572 |=(% style="width: 160px;" %)HSW1719|(% style="width:282px" %)Network status of Ethernet connnecting to server|(% style="width:452px" %)(((
573 * =0: Server connection exception
574 * =1: Server connection is OK
575 )))
576 |=(% style="width: 160px;" %)HSW1720|(% colspan="1" rowspan="12" style="width:282px" %)Related IP register in WIFI network status (It is valid when HMI is connected to WIFI)|(% style="width:452px" %)Local IP address high byte 1
577 |=(% style="width: 160px;" %)HSW1721|(% style="width:452px" %)Local IP address high byte 2
578 |=(% style="width: 160px;" %)HSW1722|(% style="width:452px" %)Local IP address high byte 3
579 |=(% style="width: 160px;" %)HSW1723|(% style="width:452px" %)Local IP address high byte 4
580 |=(% style="width: 160px;" %)HSW1724|(% style="width:452px" %)Local mask IP address high byte 1
581 |=(% style="width: 160px;" %)HSW1725|(% style="width:452px" %)Local mask IP address high byte 2
582 |=(% style="width: 160px;" %)HSW1726|(% style="width:452px" %)Local mask IP address high byte 3
583 |=(% style="width: 160px;" %)HSW1727|(% style="width:452px" %)Local mask IP address high byte 4
584 |=(% style="width: 160px;" %)HSW1728|(% style="width:452px" %)Local gateway IP address high byte 1
585 |=(% style="width: 160px;" %)HSW1729|(% style="width:452px" %)Local gateway IP address high byte 2
586 |=(% style="width: 160px;" %)HSW1730|(% style="width:452px" %)Local gateway IP address high byte 3
587 |=(% style="width: 160px;" %)HSW1731|(% style="width:452px" %)Local gateway IP address high byte 4
588 |=(% style="width: 160px;" %)HSW1733|(% colspan="1" rowspan="6" style="width:282px" %)(((
589 Display the MAC code of current WIFI
590
591 (display in hexadecimal)
592 )))|(% style="width:452px" %)Local MAC address high byte 1 (hexadecimal)
593 |=(% style="width: 160px;" %)HSW1734|(% style="width:452px" %)Local MAC address high byte 2 (hexadecimal)
594 |=(% style="width: 160px;" %)HSW1735|(% style="width:452px" %)Local MAC address high byte 3 (hexadecimal)
595 |=(% style="width: 160px;" %)HSW1736|(% style="width:452px" %)Local MAC address high byte 4 (hexadecimal)
596 |=(% style="width: 160px;" %)HSW1737|(% style="width:452px" %)Local MAC address high byte 5 (hexadecimal)
597 |=(% style="width: 160px;" %)HSW1738|(% style="width:452px" %)Local MAC address high byte 6 (hexadecimal)
598 |=(% style="width: 160px;" %)HSW1739|(% style="width:282px" %)Display the network status of WIFI|(% style="width:452px" %)(((
599 * =0: Server connection exception
600 * =1: Server connection is OK
601 )))
602 |=(% style="width: 160px;" %)HSW1740|(% style="width:282px" %)Wi-fi signal strength|(% style="width:452px" %)(((
603 Display the value of Wi-fi signal signal strength, ranges from 0~~100 (Signal strength is automatically obtained only once when HMI is powered on, and it will not be automatically updated. It needs to be used with the HSW1890)
604 )))
605 |=(% style="width: 160px;" %)HSW1741|(% colspan="1" rowspan="12" style="width:282px" %)Related IP register in 4Gnetwork status (It is valid when HMI is connected to 4G)|(% style="width:452px" %)Local IP address high byte 1
606 |=(% style="width: 160px;" %)HSW1742|(% style="width:452px" %)Local IP address high byte 2
607 |=(% style="width: 160px;" %)HSW1743|(% style="width:452px" %)Local IP address high byte 3
608 |=(% style="width: 160px;" %)HSW1744|(% style="width:452px" %)Local IP address high byte 4
609 |=(% style="width: 160px;" %)HSW1745|(% style="width:452px" %)Local mask IP address high byte 1
610 |=(% style="width: 160px;" %)HSW1746|(% style="width:452px" %)Local mask IP address high byte 2
611 |=(% style="width: 160px;" %)HSW1747|(% style="width:452px" %)Local mask IP address high byte 3
612 |=(% style="width: 160px;" %)HSW1748|(% style="width:452px" %)Local mask IP address high byte 4
613 |=(% style="width: 160px;" %)HSW1749|(% style="width:452px" %)Local gateway IP address high byte 1
614 |=(% style="width: 160px;" %)HSW1750|(% style="width:452px" %)Local gateway IP address high byte 2
615 |=(% style="width: 160px;" %)HSW1751|(% style="width:452px" %)Local gateway IP address high byte 3
616 |=(% style="width: 160px;" %)HSW1752|(% style="width:452px" %)Local gateway IP address high byte 4
617 |=(% style="width: 160px;" %)HSW1754|(% colspan="1" rowspan="6" style="width:282px" %)(((
618 Display the MAC code of current WIFI
619
620 (display in hexadecimal)
621 )))|(% style="width:452px" %)Local MAC address high byte 1 (hexadecimal)
622 |=(% style="width: 160px;" %)HSW1755|(% style="width:452px" %)Local MAC address high byte 2 (hexadecimal)
623 |=(% style="width: 160px;" %)HSW1756|(% style="width:452px" %)Local MAC address high byte 3 (hexadecimal)
624 |=(% style="width: 160px;" %)HSW1757|(% style="width:452px" %)Local MAC address high byte 4 (hexadecimal)
625 |=(% style="width: 160px;" %)HSW1758|(% style="width:452px" %)Local MAC address high byte 5 (hexadecimal)
626 |=(% style="width: 160px;" %)HSW1759|(% style="width:452px" %)Local MAC address high byte 6 (hexadecimal)
627 |=(% style="width: 160px;" %)HSW1760|(% style="width:282px" %)Display 4G network status|(% style="width:452px" %)(((
628 * =0: Server connection exception
629 * =1: Server connection is OK
630 )))
631 |=(% style="width: 160px;" %)HSW1761|(% style="width:282px" %)Display 4G network signal strength|(% style="width:452px" %)Signal strength: 0~~31. The greater the value ,the signal is stronger
632 |=(% style="width: 160px;" %)(((
633 HSW1762
634 )))|(% colspan="1" rowspan="13" style="width:282px" %)(((
635 Note: Valid when Ethernet2 of HMI is plugged into the network cable.
636 ①、When the Ethernet setting is enabled in the project parameters, this register displays the set value.
637 ②. When the Ethernet setting is not enabled in the engineering parameters, the register displays the Ethernet IP automatically acquired by the HMI.
638 ③. When the HMI is not plugged into the network cable, the register will show 0 whether the engineering parameters are set or not.
639 ④.IP related registers can be read and written (only static IP mode can be written).
640 )))|(% style="width:452px" %)(((
641 Ethernet2 Local IP address high byte 1
642 )))
643 |=(% style="width: 160px;" %)(((
644 HSW1763
645 )))|(% style="width:452px" %)(((
646 Ethernet2 Local IP address high byte 2
647 )))
648 |=(% style="width: 160px;" %)(((
649 HSW1764
650 )))|(% style="width:452px" %)(((
651 Ethernet2 Local IP address high byte 3
652 )))
653 |=(% style="width: 160px;" %)(((
654 HSW1765
655 )))|(% style="width:452px" %)(((
656 Ethernet2 Local IP address high byte 4
657 )))
658 |=(% style="width: 160px;" %)(((
659 HSW1766
660 )))|(% style="width:452px" %)(((
661 Ethernet2 Local mask IP address high byte 1
662 )))
663 |=(% style="width: 160px;" %)(((
664 HSW1767
665 )))|(% style="width:452px" %)(((
666 Ethernet2 Local mask IP address high byte 2
667 )))
668 |=(% style="width: 160px;" %)(((
669 HSW1768
670 )))|(% style="width:452px" %)Ethernet2 Local mask IP address high byte 3
671 |=(% style="width: 160px;" %)HSW1769|(% style="width:452px" %)Ethernet2 Local mask IP address high byte 4
672 |=(% style="width: 160px;" %)(((
673 HSW1770
674 )))|(% style="width:452px" %)(((
675 Ethernet2 Local gateway IP address high byte 1
676 )))
677 |=(% style="width: 160px;" %)(((
678 HSW1771
679 )))|(% style="width:452px" %)(((
680 Ethernet2 Local gateway IP address high byte 2
681 )))
682 |=(% style="width: 160px;" %)(((
683 HSW1772
684 )))|(% style="width:452px" %)(((
685 Ethernet2 Local gateway IP address high byte 3
686 )))
687 |=(% style="width: 160px;" %)(((
688 HSW1773
689 )))|(% style="width:452px" %)(((
690 Ethernet2 Local gateway IP address high byte 4
691 )))
692 |=(% style="width: 160px;" %)(((
693 HSW1774
694 )))|(% style="width:452px" %)(((
695 Ethernet2 Local Port Address
696 )))
697 |=(% style="width: 160px;" %)(((
698 HSW1775
699 )))|(% colspan="1" rowspan="6" style="width:282px" %)(((
700 ①Display the MAC code of Ethernet2 NIC
701
702 (hexadecimal display)
703
704 ②Read-only mode, not modifiable
705 )))|(% style="width:452px" %)(((
706 Ethernet2 Local MAC code high byte 1
707 )))
708 |=(% style="width: 160px;" %)(((
709 HSW1776
710 )))|(% style="width:452px" %)(((
711 Ethernet2 Local MAC code high byte 2
712 )))
713 |=(% style="width: 160px;" %)(((
714 HSW1777
715 )))|(% style="width:452px" %)(((
716 Ethernet2 Local MAC code high byte 3
717 )))
718 |=(% style="width: 160px;" %)(((
719 HSW1778
720 )))|(% style="width:452px" %)(((
721 Ethernet2 Local MAC code high byte 4
722 )))
723 |=(% style="width: 160px;" %)(((
724 HSW1779
725 )))|(% style="width:452px" %)(((
726 Ethernet2 Local MAC code high byte 5
727 )))
728 |=(% style="width: 160px;" %)(((
729 HSW1780
730 )))|(% style="width:452px" %)(((
731 Ethernet2 Local MAC code high byte 6
732 )))
733 |=(% style="width: 160px;" %)(((
734 HSW1781
735 )))|(% colspan="1" rowspan="8" style="width:282px" %)(((
736 ①Display and modify DNS1 and DNS2 of Ethernet2
737
738 ②Related registers can be read and written mode (only static IP mode can be written)
739 )))|(% style="width:452px" %)(((
740 Ethernet2 Local DNS1 address high byte 1
741 )))
742 |=(% style="width: 160px;" %)(((
743 HSW1782
744 )))|(% style="width:452px" %)(((
745 Ethernet2 Local DNS1 address high byte 2
746 )))
747 |=(% style="width: 160px;" %)(((
748 HSW1783
749 )))|(% style="width:452px" %)(((
750 Ethernet2 Local DNS1 address high byte 3
751 )))
752 |=(% style="width: 160px;" %)(((
753 HSW1784
754 )))|(% style="width:452px" %)(((
755 Ethernet2 Local DNS1 address high byte 4
756 )))
757 |=(% style="width: 160px;" %)(((
758 HSW1785
759 )))|(% style="width:452px" %)(((
760 Ethernet2 Local DNS2 address high byte 1
761 )))
762 |=(% style="width: 160px;" %)(((
763 HSW1786
764 )))|(% style="width:452px" %)(((
765 Ethernet2 Local DNS2 address high byte 2
766 )))
767 |=(% style="width: 160px;" %)(((
768 HSW1787
769 )))|(% style="width:452px" %)(((
770 Ethernet2 Local DNS2 address high byte 3
771 )))
772 |=(% style="width: 160px;" %)(((
773 HSW1788
774 )))|(% style="width:452px" %)(((
775 Ethernet2 Local DNS2 address high byte 4
776 )))
777 |=(% style="width: 160px;" %)(((
778 HSW1789
779 )))|(% colspan="1" style="width:282px" %)(((
780 Display or set the dynamic or static IP mode of Ethernet2
781 )))|(% style="width:452px" %)(((
782 HSX1789.0 = 0, Static IP mode
783
784 HSX1789.0 = 1, dynamic IP mode
785 )))
786 |=(% style="width: 160px;" %)(((
787 HSW1790
788 )))|(% colspan="1" style="width:282px" %)(((
789 Confirm Ethernet2 IP, subnet mask, gateway, DNS1, DNS2, and dynamic static IP settings
790 )))|(% style="width:452px" %)(((
791 ~= 1, confirm the setting (i.e., after modifying IP-related information, set this address to 1, representing confirmation of the modification, after which it will be reset to 0)
792 )))
793 |=(% style="width: 160px;" %)(((
794 HSW1791
795 )))|(% colspan="1" style="width:282px" %)(((
796 Network status of the Ethernet2 connection server
797 )))|(% style="width:452px" %)(((
798 ~= 0, connection to the server is abnormal = 1, connection to the server is normal
799 )))
800 |=(% style="width: 160px;" %)HSW1852|(% style="width:282px" %)Control the interval in two consecutive clicks|(% style="width:452px" %)Limit range: 1~~500ms. The default is 100 ms.
801 |=(% style="width: 160px;" %)HSW1853|(% style="width:282px" %)File format for exporting data records to USB flash drive or SD card|(% style="width:452px" %)(((
802 * =0: db database
803 * =1: CSV
804
805 (Only valid for script function DbToCsvFile)
806 )))
807 |=(% style="width: 160px;" %)HSW1854|(% style="width:282px" %)High and low word conversion type|(% style="width:452px" %)(((
808 * =0: use the old high-low word conversion (default)
809 * =1: usie the new high-low word conversion
810 )))
811 |=(% style="width: 160px;" %)HSW1855|(% style="width:282px" %)Screen Lock prompt display control|(% style="width:452px" %)(((
812 Control whether the screen lock prompt is displayed,
813
814 * =0: display(default value)
815 * =Other: no display.
816 )))
817 |=(% style="width: 160px;" %)HSW1856|(% style="width:282px" %)Display map fence drawing status|(% style="width:452px" %)(((
818 * =0: no map fence
819 * =1: The map fence is drawn and the device is inside the fence
820 * =2: The map fence is drawn and the device is outside the fence
821 )))
822 |=(% style="width: 160px;" %)HSW1857|(% style="width:282px" %)USB disk download |(% style="width:452px" %)(((
823 * =0: download project
824 * =1: download firmware
825 * =2: enter the background
826 )))
827 |=(% style="width: 160px;" %)HSW1865|(% style="width:282px" %)Priority connection to the cloud|(% style="width:452px" %)(((
828 * =0: priority Ethernet
829 * =1: priority WLAN
830 * =2: priority 4G
831 )))
832 |=(% style="width: 160px;" %)HSW1866|(% style="width:282px" %)Delete the Lua extension module file|(% style="width:452px" %)(((
833 * =0: delete;
834 * = Others: do not delete
835 )))
836 |=(% style="width: 160px;" %)HSW1867|(% style="width:282px" %)Reset mode|(% style="width:452px" %)(((
837 Monitor address is set during reset of reset switch, whether to cancel reset,
838
839 * = 0: yes (default);
840 * = 1: no
841 )))
842 |=(% style="width: 160px;" %)HSW1868|(% style="width:282px" %)Double-click or long press the record type table mode|(% style="width:452px" %)(((
843 Controls whether the button pops up when double-clicking or long pressing on record type table object
844
845 * = 0: yes (default);
846 * = 1: no
847 )))
848 |=(% style="width: 160px;" %)(((
849 HSW1869
850 )))|(% style="width:282px" %)(((
851 Dynamic screensaver countdown
852 )))|(% style="width:452px" %)(((
853 Countdown to enter dynamic screensaver effect, unit (S)
854 )))
855 |=(% style="width: 160px;" %)(((
856 HSW1870
857 )))|(% style="width:282px" %)(((
858 Display or set the dynamic or static IP mode of Ethernet1
859 )))|(% style="width:452px" %)(((
860 HSX1870.0 = 0, Static IP mode
861
862 HSX1870.0 = 1, dynamic IP mode
863 )))
864 |=(% style="width: 160px;" %)(((
865 HSW1871
866 )))|(% style="width:282px" %)(((
867 Confirm the IP, subnet mask, gateway, DNS1, DNS2, and dynamic static IP settings for Ethernet1
868 )))|(% style="width:452px" %)(((
869 ~= 1, confirm the setting (i.e., after modifying IP-related information, set this address to 1, representing confirmation of the modification, after which it will be reset to 0)
870 )))
871 |=(% style="width: 160px;" %)(((
872 HSW1872
873 )))|(% colspan="1" rowspan="8" style="width:282px" %)(((
874 ①Display and modify DNS1 and DNS2 of Ethernet1
875
876 ②Related registers can be read and written mode (only static IP mode can be written)
877 )))|(% style="width:452px" %)(((
878 Ethernet1 Local DNS1 address high byte 1
879 )))
880 |=(% style="width: 160px;" %)(((
881 HSW1873
882 )))|(% style="width:452px" %)Ethernet1 Local DNS1 address high byte 2
883 |=(% style="width: 160px;" %)(((
884 HSW1874
885 )))|(% style="width:452px" %)Ethernet1 Local DNS1 address high byte 3
886 |=(% style="width: 160px;" %)(((
887 HSW1875
888 )))|(% style="width:452px" %)Ethernet1 Local DNS1 address high byte 4
889 |=(% style="width: 160px;" %)(((
890 HSW1876
891 )))|(% style="width:452px" %)Ethernet1 Local DNS2 address high byte 1
892 |=(% style="width: 160px;" %)(((
893 HSW1877
894 )))|(% style="width:452px" %)Ethernet1 Local DNS2 address high byte 2
895 |=(% style="width: 160px;" %)(((
896 HSW1878
897 )))|(% style="width:452px" %)Ethernet1 Local DNS2 address high byte 3
898 |=(% style="width: 160px;" %)(((
899 HSW1879
900 )))|(% style="width:452px" %)Ethernet1 Local DNS2 address high byte 4
901 |=(% style="width: 160px;" %)HSW1890|(% colspan="1" style="width:282px" %)Enable refresh current network signal|(% style="width:452px" %)(((
902 * =1: Refresh the network signal once after triggered (This register will be automatically reset after triggered, only update the signal value once after per 15 seconds, not able to update twice in the short interval)
903 * =Others: not refresh
904 )))
905 |=(% style="width: 160px;" %)HSW1891|(% colspan="1" style="width:282px" %)Enable clear cache for screen data  |(% style="width:452px" %)(((
906 * =1, not clear screen cache when switch language
907 * =2, trigger clear cache of all screens for once time
908 * =3, always clear cache of all screen data
909 )))
910 |=(% style="width: 160px;" %)HSW10000~~19999|(% style="width:282px" %)Power-down storage area|(% style="width:452px" %)After restart, the data remains
911 |=(% style="width: 160px;" %)HSW10035|(% rowspan="13" style="width:282px" %)(((
912 Note: Valid when Ethernet1 of HMI is plugged into the network cable.
913 ① When the Ethernet setting is enabled in the project parameters, this register displays the set value.
914 ② When the Ethernet setting is not enabled in the engineering parameters, the register displays the Ethernet IP automatically acquired by the HMI.
915 ③ When the HMI is not plugged into the network cable, the register will show 0 whether the engineering parameters are set or not.
916 ④ IP related registers can be read and written (only static IP mode can be written).
917 )))|(% style="width:452px" %)Local IP address high byte 1
918 |=(% style="width: 160px;" %)HSW10036|(% style="width:452px" %)Local IP address high byte 2
919 |=(% style="width: 160px;" %)HSW10037|(% style="width:452px" %)Local IP address high byte 3
920 |=(% style="width: 160px;" %)HSW10038|(% style="width:452px" %)Local IP address high byte 4
921 |=(% style="width: 160px;" %)HSW10039|(% style="width:452px" %)Local mask IP address high byte 1
922 |=(% style="width: 160px;" %)HSW10040|(% style="width:452px" %)Local mask IP address high byte 2
923 |=(% style="width: 160px;" %)HSW10041|(% style="width:452px" %)Local mask IP address high byte 3
924 |=(% style="width: 160px;" %)HSW10042|(% style="width:452px" %)Local mask IP address high byte 4
925 |=(% style="width: 160px;" %)HSW10043|(% style="width:452px" %)Local gateway address high byte 1
926 |=(% style="width: 160px;" %)HSW10044|(% style="width:452px" %)Local gateway address high byte 2
927 |=(% style="width: 160px;" %)HSW10045|(% style="width:452px" %)Local gateway address high byte 3
928 |=(% style="width: 160px;" %)HSW10046|(% style="width:452px" %)Local gateway address high byte 4
929 |=(% style="width: 160px;" %)HSW10047|(% style="width:452px" %)Local port address
930 |=(% style="width: 160px;" %)HSW10048|(% rowspan="6" style="width:282px" %)(((
931 ①Display the MAC code of Ethernet1 NIC
932
933 (hexadecimal display)
934
935 ②Read-only mode, not modifiable
936 )))|(% style="width:452px" %)Local MAC code high word 1
937 |=(% style="width: 160px;" %)HSW10049|(% style="width:452px" %)Local MAC code high word 2
938 |=(% style="width: 160px;" %)HSW10050|(% style="width:452px" %)Local MAC code high word 3
939 |=(% style="width: 160px;" %)HSW10051|(% style="width:452px" %)Local MAC code high word 4
940 |=(% style="width: 160px;" %)HSW10052|(% style="width:452px" %)Local MAC code high word 5
941 |=(% style="width: 160px;" %)HSW10053|(% style="width:452px" %)Local MAC code high word 6
942 |=(% style="width: 160px;" %)HSW10118|(% colspan="1" rowspan="2" style="width:282px" %)TSAP settings for HMI in the Siemens LOGO! 8 protocol|(% style="width:452px" %)HMI local TSAP, which corresponds to the remote TSAP of PLC
943 |=(% style="width: 160px;" %)HSW10119|(% style="width:452px" %)HMI remote TSAP, which corresponds to the local TSAP of PLC
944 |=(% style="width: 160px;" %)HSW10461~~10493|(% style="width:282px" %)Remote access password|(% style="width:452px" %)8-character remote access password
945 |=(% style="width: 160px;" %)HSW10494~~10558|(% style="width:282px" %)Machine ID (Read only)|(% style="width:452px" %)Machine ID for remote access (read only 64-bit)
946 |=(% style="width: 160px;" %)HSW10576|(% style="width:282px" %)Save dynamic installment settings|(% style="width:452px" %)HSX10576.0=1: Save the set dynamic installment information
947 |=(% style="width: 160px;" %)HSW10577|(% style="width:282px" %)Control address for installment|(% style="width:452px" %)(((
948 * HSX10577.0=0: disable dynamic installment
949 * HSX10577.0=1: enable dynamic installment
950 * HSX10577.1=0: disable static installment
951 * HSX10577.1=1: enable static installment
952 )))
953 |=(% style="width: 160px;" %)HSW10578-10583|(% style="width:282px" %)Password for dynamic installment|(% style="width:452px" %)Character Input/ Display (length: 6)
954 |=(% style="width: 160px;" %)HSW10584-10586|(% style="width:282px" %)Expiry time of dynamic installment|(% style="width:452px" %)Expiry time: YYYYMMDD (Numeric Input/ Display)
955 |=(% style="width: 160px;" %)HSW10587-10589|(% style="width:282px" %)Last expiry time of dynamic installment|(% style="width:452px" %)Expiry time: YYYYMMDD (Numeric Input/ Display)
956 |=(% style="width: 160px;" %)HSW10590|(% style="width:282px" %)Background light time|(% style="width:452px" %)(((
957 Set the light time for background
958
959 * =0: The screen backlight is always on.
960 * =Others: The screen backlight is on for a period of time and then turns off. The length of time is controlled by the value of the register address. Unit: second.
961 )))
962 |=(% style="width: 160px;" %)HSW10591|(% style="width:282px" %)Backlight brightness adjustment|(% style="width:452px" %)Backlight brightness range: 1 (darkest) ~~ 100 (brightest)
963 |=(% style="width: 160px;" %)HSW10603|(% style="width:282px" %)Set the printer to print orientation|(% style="width:452px" %)(((
964 Set the print direction:
965
966 * =1: Forward printing
967 * =2: Reverse print
968 * =Other: Forward print
969 )))
970 |=(% style="width: 160px;" %)HSW10604|(% style="width:282px" %)Print dot type|(% style="width:452px" %)(((
971 * =1: new firmware 8 dot matrix type
972 * =2: new firmware 24 dot matrix type
973 * =3: old firmware 8 dot matrix type
974 * =4: old firmware 24 dot matrix type
975 * =Other: new firmware 8 dot matrix type
976 )))
977 |=(% style="width: 160px;" %)HSW10605|(% style="width:282px" %)Print width of printer|(% style="width:452px" %)Set the width of the printer to print (in pixels), such as HSW10605 = 394: The printer supports images with a print width of 394 pixels
978 |=(% style="width: 160px;" %)HSW10606|(% style="width:282px" %)Printer instruction type|(% style="width:452px" %)(((
979 * =1: Graphic print type
980 * =2: Dot density printing type
981 * =3: special for EPSON printer
982 )))
983 |=(% style="width: 160px;" %)HSW10607|(% style="width:282px" %)Printer paper cutting function|(% style="width:452px" %)(((
984 * =1: Enable
985 * =2: Disable
986 )))
987 |=(% style="width: 160px;" %)HSW10608|(% style="width:282px" %)Print the alignment of the text|(% style="width:452px" %)(((
988 * =1: Left alignment
989 * =2: Center alignment
990 * =3: Right alignment
991 )))
992 |=(% style="width: 160px;" %)HSW10610|(% style="width:282px" %)Set weconcloud server|(% style="width:452px" %)(((
993 * =0: Select the server configured in "Project Settings"
994 * =1: select Server 1
995 * =2: select Server 2
996 )))
997 |=(% style="width: 160px;" %)HSW11750|(% style="width:282px" %)Set the language of the Message List prompt** (ie series)**|(% style="width:452px" %)(((
998 * =0: which is followed the project language
999 * =1: English
1000 * =2: Chinese
1001 )))
1002 |=(% style="width: 160px;" %)HSW11756|(% style="width:282px" %)(((
1003 Access permission restrictions
1004
1005 (ig series and** **8000/9000 series with -R after system upgrade)
1006 )))|(% style="width:452px" %)(((
1007 * =0: LAN or the external network both OK
1008 * =1: Only LAN access
1009 * =2: Only external network can access
1010 )))
1011 |=(% style="width: 160px;" %)HSW11757|(% style="width:282px" %)Enable the valid date of the dynamic installment password|(% style="width:452px" %)(((
1012 * =0: Disabled
1013 * =1: Enable
1014 )))
1015 |=(% style="width: 160px;" %)HSW11758|(% style="width:282px" %)Enable Screensaver|(% style="width:452px" %)(((
1016 * =0: Disabled
1017 * =1: Enable
1018 )))
1019 |=(% style="width: 160px;" %)HSW11759|(% style="width:282px" %)Screensaver interval time|(% style="width:452px" %)(((
1020 Set the time how long will enter Screensaver (Range 10~~43200s)
1021 )))
1022 |=(% style="width: 160px;" %)HSW11760|(% style="width:282px" %)Screensaver countdown|(% style="width:452px" %)Display the countdown to enter the Screensaver, unit: second.
1023 |=(% style="width: 160px;" %)HSW11761|(% style="width:282px" %)Screensaver screen number|(% style="width:452px" %)Set the screen number for Screensaver
1024 |=(% style="width: 160px;" %)(((
1025 HSW11762
1026 )))|(% style="width:282px" %)(((
1027 Dynamic screensaver control address
1028 )))|(% style="width:452px" %)(((
1029 HSX11762.0=0, initialize with project configuration;
1030
1031 HSX11762.0=1, initialize with special register configuration;
1032
1033 HSX11762.1=0, disable dynamic screensaver;
1034
1035 HSX11762.1=1, enable dynamic screensaver
1036 )))
1037 |=(% style="width: 160px;" %)(((
1038 HSW11763
1039 )))|(% style="width:282px" %)(((
1040 Waiting time to enter the dynamic screensaver
1041 )))|(% style="width:452px" %)(((
1042 Waiting time when the screen is not operated, range 1~~720 minutes
1043 )))
1044 |=(% style="width: 160px;" %)(((
1045 HSW11764
1046 )))|(% style="width:282px" %)(((
1047 Animated screensaver animation type
1048 )))|(% style="width:452px" %)(((
1049 ~=0: Raster,=1: Blinds,=2: Bubble
1050 )))
1051
1052 == Serial port communication configuration ==
1053
1054 (% class="table-bordered" %)
1055 |=(% scope="row" style="width: 102px;" %)Port|=(% style="width: 173px;" %)**Function**|=(% style="width: 122px;" %)**Address**|=(% colspan="2" style="width: 506px;" %)**Description**
1056 |(% colspan="1" rowspan="11" style="width:102px" %)COM1|(% style="width:173px" %)Communication mode|(% style="width:122px" %)HSW10061|(% colspan="2" style="width:506px" %)(((
1057 * =0: RS232
1058 * =1: RS485
1059 * =2: RS422
1060 )))
1061 |(% style="width:173px" %)Baud rate|(% style="width:122px" %)HSW10062|(% colspan="2" style="width:506px" %)(((
1062 * =0: 1200
1063 * =1: 2400
1064 * =2: 4800
1065 * =3: 9600
1066 * =4: 19200
1067 * =5: 38400
1068 * =6: 57600
1069 * =7: 115200
1070 * =8: 230400
1071 )))
1072 |(% style="width:173px" %)Data bit|(% style="width:122px" %)HSW10063|(% colspan="2" style="width:506px" %)(((
1073 * =7: 7 bit
1074 * =8: 8 bit
1075 )))
1076 |(% style="width:173px" %)Stop bit|(% style="width:122px" %)HSW10064|(% colspan="2" style="width:506px" %)(((
1077 * =1: 1 bit
1078 * =2: 2 bit
1079 )))
1080 |(% style="width:173px" %)Check bit|(% style="width:122px" %)HSW10065|(% colspan="2" style="width:506px" %)(((
1081 * =0: None
1082 * =1: ODD
1083 * =2: EVEN
1084 )))
1085 |(% style="width:173px" %)Wait timeout|(% style="width:122px" %)HSW10066|(% colspan="2" style="width:506px" %)(((
1086 * Unit: ms.
1087 * Range: 0 to 30000
1088 )))
1089 |(% style="width:173px" %)reveive timeout|(% style="width:122px" %)HSW10067|(% colspan="2" style="width:506px" %)(((
1090 * Unit: ms.
1091 * Range: 0 to 30000
1092 )))
1093 |(% style="width:173px" %)Retry time|(% style="width:122px" %)HSW10068|(% colspan="2" style="width:506px" %)(((
1094 * Unit: times.
1095 * Range: 0 to 100
1096 )))
1097 |(% style="width:173px" %)Retry timeout|(% style="width:122px" %)HSW10069|(% colspan="2" style="width:506px" %)(((
1098 * Unit: s.
1099 * Range: 0 to 300
1100 )))
1101 |(% style="width:173px" %)HMI station number|(% style="width:122px" %)HSW10070|(% colspan="2" style="width:506px" %)
1102 |(% style="width:173px" %)PLC station number|(% style="width:122px" %)HSW10071|(% colspan="2" style="width:506px" %)
1103 |(% colspan="1" rowspan="11" style="width:102px" %)COM1-2|(% style="width:173px" %)Communication mode|(% style="width:122px" %)HSW10094|(% colspan="2" style="width:506px" %)(((
1104 * =0: RS232
1105 * =1: RS485
1106 * =2: RS422
1107 * =6: RS485-2
1108 )))
1109 |(% style="width:173px" %)Baud rate|(% style="width:122px" %)HSW10095|(% colspan="2" style="width:506px" %)(((
1110 * =0: 1200
1111 * =1: 2400
1112 * =2: 4800
1113 * =3: 9600
1114 * =4: 19200
1115 * =5: 38400
1116 * =6: 57600
1117 * =7: 115200
1118 * =8: 230400
1119 )))
1120 |(% style="width:173px" %)Data bit|(% style="width:122px" %)HSW10096|(% colspan="2" style="width:506px" %)(((
1121 * =7: 7 bit
1122 * =8: 8 bit
1123 )))
1124 |(% style="width:173px" %)Stop bit|(% style="width:122px" %)HSW10097|(% colspan="2" style="width:506px" %)(((
1125 * =1: 1 bit
1126 * =2: 2 bit
1127 )))
1128 |(% style="width:173px" %)Check bit|(% style="width:122px" %)HSW10098|(% colspan="2" style="width:506px" %)(((
1129 * =0: None
1130 * =1: ODD
1131 * =2: EVEN
1132 )))
1133 |(% style="width:173px" %)Wait timeout|(% style="width:122px" %)HSW10099|(% colspan="2" style="width:506px" %)(((
1134 * Unit: ms.
1135 * Range: 0 to 30000
1136 )))
1137 |(% style="width:173px" %)receive timeout|(% style="width:122px" %)HSW10100|(% colspan="2" style="width:506px" %)(((
1138 * Unit: ms.
1139 * Range: 0 to 30000
1140 )))
1141 |(% style="width:173px" %)Retry time|(% style="width:122px" %)HSW10101|(% colspan="2" style="width:506px" %)(((
1142 * Unit: times.
1143 * Range: 0 to 100
1144 )))
1145 |(% style="width:173px" %)Retry timeout|(% style="width:122px" %)HSW10102|(% colspan="2" style="width:506px" %)(((
1146 * Unit: s.
1147 * Range: 0 to 30
1148 )))
1149 |(% style="width:173px" %)HMI station number|(% style="width:122px" %)HSW10103|(% colspan="2" style="width:506px" %)
1150 |(% style="width:173px" %)PLC station number|(% style="width:122px" %)HSW10104|(% colspan="2" style="width:506px" %)
1151 |(% colspan="1" rowspan="11" style="width:102px" %)COM1-3|(% style="width:173px" %)Communication mode|(% style="width:122px" %)HSW10120|(% colspan="2" style="width:506px" %)(((
1152 * =0: RS232
1153 * =1: RS485
1154 * =2: RS422
1155 * =6: RS485-2
1156 )))
1157 |(% style="width:173px" %)Baud rate|(% style="width:122px" %)HSW10121|(% colspan="2" style="width:506px" %)(((
1158 * =0: 1200
1159 * =1: 2400
1160 * =2: 4800
1161 * =3: 9600
1162 * =4: 19200
1163 * =5: 38400
1164 * =6: 57600
1165 * =7: 115200
1166 * =8: 230400
1167 )))
1168 |(% style="width:173px" %)Data bit|(% style="width:122px" %)HSW10122|(% colspan="2" style="width:506px" %)(((
1169 * =7: 7 bit
1170 * =8: 8 bit
1171 )))
1172 |(% style="width:173px" %)Stop bit|(% style="width:122px" %)HSW10123|(% colspan="2" style="width:506px" %)(((
1173 * =1: 1 bit
1174 * =2: 2 bit
1175 )))
1176 |(% style="width:173px" %)Check bit|(% style="width:122px" %)HSW10124|(% colspan="2" style="width:506px" %)(((
1177 * =0: None
1178 * =1: ODD
1179 * =2: EVEN
1180 )))
1181 |(% style="width:173px" %)Wait timeout|(% style="width:122px" %)HSW10125|(% colspan="2" style="width:506px" %)(((
1182 * Unit: ms.
1183 * Range: 0 to 30000
1184 )))
1185 |(% style="width:173px" %)receive timeout|(% style="width:122px" %)HSW10126|(% colspan="2" style="width:506px" %)(((
1186 * Unit: ms.
1187 * Range: 0 to 30000
1188 )))
1189 |(% style="width:173px" %)Retry time|(% style="width:122px" %)HSW10127|(% colspan="2" style="width:506px" %)(((
1190 * Unit: times.
1191 * Range: 0 to 100
1192 )))
1193 |(% style="width:173px" %)Retry timeout|(% style="width:122px" %)HSW10128|(% colspan="2" style="width:506px" %)(((
1194 * Unit: s.
1195 * Range: 0 to 30
1196 )))
1197 |(% style="width:173px" %)HMI station number|(% style="width:122px" %)HSW10129|(% colspan="2" style="width:506px" %)
1198 |(% style="width:173px" %)PLC station number|(% style="width:122px" %)HSW10130|(% colspan="2" style="width:506px" %)
1199 |(% colspan="1" rowspan="11" style="width:102px" %)COM2|(% style="width:173px" %)Communication mode|(% style="width:122px" %)HSW10072|(% colspan="2" style="width:506px" %)(((
1200 * =0: RS232
1201 * =1: RS485
1202 )))
1203 |(% style="width:173px" %)Baud rate|(% style="width:122px" %)HSW10073|(% colspan="2" style="width:506px" %)(((
1204 * =0: 1200
1205 * =1: 2400
1206 * =2: 4800
1207 * =3: 9600
1208 * =4: 19200
1209 * =5: 38400
1210 * =6: 57600
1211 * =7: 115200
1212 * =8: 230400
1213 )))
1214 |(% style="width:173px" %)Data bit|(% style="width:122px" %)HSW10074|(% colspan="2" style="width:506px" %)(((
1215 * =7: 7 bit
1216 * =8: 8 bit
1217 )))
1218 |(% style="width:173px" %)Stop bit|(% style="width:122px" %)HSW10075|(% colspan="2" style="width:506px" %)(((
1219 * =1: 1 bit
1220 * =2: 2 bit
1221 )))
1222 |(% style="width:173px" %)Check bit|(% style="width:122px" %)HSW10076|(% colspan="2" style="width:506px" %)(((
1223 * =0: None
1224 * =1: ODD
1225 * =2: EVEN
1226 )))
1227 |(% style="width:173px" %)Wait timeout|(% style="width:122px" %)HSW10077|(% colspan="2" style="width:506px" %)(((
1228 * Unit: ms.
1229 * Range: 0 to 30000
1230 )))
1231 |(% style="width:173px" %)receive timeout|(% style="width:122px" %)HSW10078|(% colspan="2" style="width:506px" %)(((
1232 * Unit: ms.
1233 * Range: 0 to 30000
1234 )))
1235 |(% style="width:173px" %)Retry time|(% style="width:122px" %)HSW10079|(% colspan="2" style="width:506px" %)(((
1236 * Unit: times.
1237 * Range: 0 to 100
1238 )))
1239 |(% style="width:173px" %)Retry timeout|(% style="width:122px" %)HSW10080|(% colspan="2" style="width:506px" %)(((
1240 * Unit: s.
1241 * Range: 0 to 30
1242 )))
1243 |(% style="width:173px" %)HMI station number|(% style="width:122px" %)HSW10081|(% colspan="2" style="width:506px" %)
1244 |(% style="width:173px" %)PLC station number|(% style="width:122px" %)HSW10082|(% colspan="2" style="width:506px" %)
1245 |(% colspan="1" rowspan="11" style="width:102px" %)COM2-2|(% style="width:173px" %)Communication mode|(% style="width:122px" %)HSW10105|(% colspan="2" style="width:506px" %)(((
1246 * =0: RS232
1247 * =1: RS485
1248 )))
1249 |(% style="width:173px" %)Baud rate|(% style="width:122px" %)HSW10106|(% colspan="2" style="width:506px" %)(((
1250 * =0: 1200
1251 * =1: 2400
1252 * =2: 4800
1253 * =3: 9600
1254 * =4: 19200
1255 * =5: 38400
1256 * =6: 57600
1257 * =7: 115200
1258 * =8: 230400
1259 )))
1260 |(% style="width:173px" %)Data bit|(% style="width:122px" %)HSW10107|(% colspan="2" style="width:506px" %)(((
1261 * =7: 7 bit
1262 * =8: 8 bit
1263 )))
1264 |(% style="width:173px" %)Stop bit|(% style="width:122px" %)HSW10108|(% colspan="2" style="width:506px" %)(((
1265 * =1: 1 bit
1266 * =2: 2 bit
1267 )))
1268 |(% style="width:173px" %)Check bit|(% style="width:122px" %)HSW10109|(% colspan="2" style="width:506px" %)(((
1269 * =0: None
1270 * =1: ODD
1271 * =2: EVEN
1272 )))
1273 |(% style="width:173px" %)Wait timeout|(% style="width:122px" %)HSW10110|(% colspan="2" style="width:506px" %)(((
1274 * Unit: ms.
1275 * Range: 0 to 30000
1276 )))
1277 |(% style="width:173px" %)receive timeout|(% style="width:122px" %)HSW10111|(% colspan="2" style="width:506px" %)(((
1278 * Unit: ms.
1279 * Range: 0 to 30000
1280 )))
1281 |(% style="width:173px" %)Retry time|(% style="width:122px" %)HSW10112|(% colspan="2" style="width:506px" %)(((
1282 * Unit: times.
1283 * Range: 0 to 100
1284 )))
1285 |(% style="width:173px" %)Retry timeout|(% style="width:122px" %)HSW10113|(% colspan="2" style="width:506px" %)(((
1286 * Unit: s.
1287 * Range: 0 to 30
1288 )))
1289 |(% style="width:173px" %)HMI station number|(% style="width:122px" %)HSW10114|(% colspan="2" style="width:506px" %)
1290 |(% style="width:173px" %)PLC station number|(% style="width:122px" %)HSW10115|(% colspan="2" style="width:506px" %)
1291 |(% colspan="1" rowspan="11" style="width:102px" %)COM3|(% style="width:173px" %)Communication mode|(% style="width:122px" %)HSW10083|(% colspan="2" style="width:506px" %)(((
1292 * =1: RS485
1293 )))
1294 |(% style="width:173px" %)Baud rate|(% style="width:122px" %)HSW10084|(% colspan="2" style="width:506px" %)(((
1295 * =0: 1200
1296 * =1: 2400
1297 * =2: 4800
1298 * =3: 9600
1299 * =4: 19200
1300 * =5: 38400
1301 * =6: 57600
1302 * =7: 115200
1303 * =8: 230400
1304 )))
1305 |(% style="width:173px" %)Data bit|(% style="width:122px" %)HSW10085|(% colspan="2" style="width:506px" %)(((
1306 * =7: 7 bit
1307 * =8: 8 bit
1308 )))
1309 |(% style="width:173px" %)Stop bit|(% style="width:122px" %)HSW10086|(% colspan="2" style="width:506px" %)(((
1310 * =1: 1 bit
1311 * =2: 2 bit
1312 )))
1313 |(% style="width:173px" %)Check bit|(% style="width:122px" %)HSW10087|(% colspan="2" style="width:506px" %)(((
1314 * =0: None
1315 * =1: ODD
1316 * =2: EVEN
1317 )))
1318 |(% style="width:173px" %)Wait timeout|(% style="width:122px" %)HSW10088|(% colspan="2" style="width:506px" %)(((
1319 * Unit: ms.
1320 * Range: 0 to 30000
1321 )))
1322 |(% style="width:173px" %)receive timeout|(% style="width:122px" %)HSW10089|(% colspan="2" style="width:506px" %)(((
1323 * Unit: ms.
1324 * Range: 0 to 30000
1325 )))
1326 |(% style="width:173px" %)Retry time|(% style="width:122px" %)HSW10090|(% colspan="2" style="width:506px" %)(((
1327 * Unit: times.
1328 * Range: 0 to 100
1329 )))
1330 |(% style="width:173px" %)Retry timeout|(% style="width:122px" %)HSW10091|(% colspan="2" style="width:506px" %)(((
1331 * Unit: s.
1332 * Range: 0 to 30
1333 )))
1334 |(% style="width:173px" %)HMI station number|(% style="width:122px" %)HSW10092|(% colspan="2" style="width:506px" %)
1335 |(% style="width:173px" %)PLC station number|(% style="width:122px" %)HSW10093|(% colspan="2" style="width:506px" %)
1336 |(% colspan="1" rowspan="2" style="width:102px" %)CAN port|(% style="width:173px" %)CAN1 baud rate|(% style="width:122px" %)HSW010116|(% style="width:299px" %)(((
1337 Unit: K, the baud rate must be an integer.
1338
1339 For example, when the baud rate required is 250000, just enter 250.
1340 )))|(% colspan="1" rowspan="2" style="width:218px" %)**✎Note: **If baud rate has been modified,please wait 5 seconds,then restart the HMI to take effect.
1341 |(% style="width:173px" %)CAN2 baud rate|(% style="width:122px" %)HSW010117|(% style="width:299px" %)(((
1342 Unit: K, the baud rate must be an integer.
1343
1344 For example, when the baud rate required is 250000, just enter 250.
1345 )))
1346
1347 == Ethernet communication configuration ==
1348
1349 (% class="table-bordered" %)
1350 |(% style="width:40px" %)**No.**|(% style="width:295px" %)**Function**|(% style="width:220px" %)**Address**|(% style="width:336px" %)**Description**
1351 |(% rowspan="7" style="width:40px" %)1|(% colspan="1" rowspan="7" style="width:295px" %)Ethernet parameter configuration for communication number 1 in list. Configure those addresses according to connected device. After configuration, wait for 5 seconds and restart the HMI.|(% style="width:220px" %)HSW11004|(% style="width:336px" %)Device IP address high word 1
1352 |(% style="width:220px" %)HSW11005|(% style="width:336px" %)Device IP address high word 2
1353 |(% style="width:220px" %)HSW11006|(% style="width:336px" %)Device IP address high word 3
1354 |(% style="width:220px" %)HSW11007|(% style="width:336px" %)Device IP address high word 4
1355 |(% style="width:220px" %)HSW11008|(% style="width:336px" %)Device Port number
1356 |(% style="width:220px" %)HSW11009|(% style="width:336px" %)(((
1357 ~=2 TCP
1358
1359 ~=3 UDP
1360 )))
1361 |(% style="width:220px" %)HSW11010|(% style="width:336px" %)Reserved
1362 |(% rowspan="7" style="width:40px" %)2|(% colspan="1" rowspan="7" style="width:295px" %)Ethernet parameter configuration for communication number 2 in list. Configure those addresses according to connected device. After configuration, wait for 5 seconds and restart the HMI.|(% style="width:220px" %)HSW11011|(% style="width:336px" %)Device IP address high word 1
1363 |(% style="width:220px" %)HSW11012|(% style="width:336px" %)Device IP address high word 2
1364 |(% style="width:220px" %)HSW11013|(% style="width:336px" %)Device IP address high word 3
1365 |(% style="width:220px" %)HSW11014|(% style="width:336px" %)Device IP address high word 4
1366 |(% style="width:220px" %)HSW11015|(% style="width:336px" %)Device Port number
1367 |(% style="width:220px" %)HSW11016|(% style="width:336px" %)(((
1368 ~=2 TCP
1369
1370 ~=3 UDP
1371 )))
1372 |(% style="width:220px" %)HSW11017|(% style="width:336px" %)Reserved
1373 |(% style="width:40px" %)…|(% style="width:295px" %) |(% style="width:220px" %)…|(% style="width:336px" %)…
1374 |(% rowspan="7" style="width:40px" %)32|(% colspan="1" rowspan="7" style="width:295px" %)Ethernet parameter configuration for communication number 32 in list. Configure those addresses according to connected device. After configuration, wait for 5 seconds and restart the HMI.|(% style="width:220px" %)HSW11221|(% style="width:336px" %)Device IP address high word 1
1375 |(% style="width:220px" %)HSW11222|(% style="width:336px" %)Device IP address high word 2
1376 |(% style="width:220px" %)HSW11223|(% style="width:336px" %)Device IP address high word 3
1377 |(% style="width:220px" %)HSW11224|(% style="width:336px" %)Device IP address high word 4
1378 |(% style="width:220px" %)HSW11225|(% style="width:336px" %)Device Port number
1379 |(% style="width:220px" %)HSW11226|(% style="width:336px" %)(((
1380 ~=2 TCP;
1381
1382 ~=3 UDP
1383 )))
1384 |(% style="width:220px" %)HSW11227|(% style="width:336px" %)Reserved
1385
1386 (% class="box infomessage" %)
1387 (((
1388 **✎Note:** The number of Ethernet connections supported by different HMI series varies.
1389 )))
1390
1391 == Communication control ==
1392
1393 (% class="table-bordered" %)
1394 |=(% style="width: 135px;" %)**Communication No.**|=(% style="width: 102px;" %)**Station No.**|=(% style="width: 185px;" %)**Control bit**|=(% style="width: 191px;" %)**Communication lamp**|=(% style="width: 271px;" %)**Description**
1395 |(% colspan="1" rowspan="16" style="width:135px" %)1|(% style="width:102px" %)0~~15|(% style="width:185px" %)HSX550.0～HSX550.15|(% style="width:191px" %)HSX558.0～HSX558.15|(% rowspan="160" style="width:271px" %)Communication number refers to the number in "Communication Port Configuration". A number provides 256 device station numbers. Each station number corresponds to a communication control bit and a communication indicator bit. Registers HSX550.0 to HSX805.15 are used to control the station numbers from 0 to 127, and registers HSX1150.0 to HSX1405.15 are used to control station numbers 128 to 255.
1396 |(% style="width:102px" %)16~~31|(% style="width:185px" %)HSX551.0～HSX551.15|(% style="width:191px" %)HSX559.0～HSX559.15
1397 |(% style="width:102px" %)32~~47|(% style="width:185px" %)HSX552.0～HSX552.15|(% style="width:191px" %)HSX560.0～HSX560.15
1398 |(% style="width:102px" %)48~~63|(% style="width:185px" %)HSX553.0～HSX553.15|(% style="width:191px" %)HSX561.0～HSX561.15
1399 |(% style="width:102px" %)64～79|(% style="width:185px" %)HSX554.0～HSX554.15|(% style="width:191px" %)HSX562.0～HSX562.15
1400 |(% style="width:102px" %)80～95|(% style="width:185px" %)HSX555.0～HSX555.15|(% style="width:191px" %)HSX563.0～HSX563.15
1401 |(% style="width:102px" %)96～111|(% style="width:185px" %)HSX556.0～HSX556.15|(% style="width:191px" %)HSX564.0～HSX564.15
1402 |(% style="width:102px" %)112～127|(% style="width:185px" %)HSX557.0～HSX557.15|(% style="width:191px" %)HSX565.0～HSX565.15
1403 |(% style="width:102px" %)128～143|(% style="width:185px" %)HSX1150.0～HSX1150.15|(% style="width:191px" %)HSX1158.0～HSX1158.15
1404 |(% style="width:102px" %)144～159|(% style="width:185px" %)HSX1151.0～HSX1151.15|(% style="width:191px" %)HSX1159.0～HSX1159.15
1405 |(% style="width:102px" %)160～175|(% style="width:185px" %)HSX1152.0～HSX1152.15|(% style="width:191px" %)HSX1160.0～HSX1160.15
1406 |(% style="width:102px" %)176～191|(% style="width:185px" %)HSX1153.0～HSX1153.15|(% style="width:191px" %)HSX1161.0～HSX1161.15
1407 |(% style="width:102px" %)192～207|(% style="width:185px" %)HSX1154.0～HSX1154.15|(% style="width:191px" %)HSX1162.0～HSX1162.15
1408 |(% style="width:102px" %)208～223|(% style="width:185px" %)HSX1155.0～HSX1155.15|(% style="width:191px" %)HSX1163.0～HSX1163.15
1409 |(% style="width:102px" %)224～239|(% style="width:185px" %)HSX1156.0～HSX1156.15|(% style="width:191px" %)HSX1164.0～HSX1164.15
1410 |(% style="width:102px" %)240～255|(% style="width:185px" %)HSX1157.0～HSX1157.15|(% style="width:191px" %)HSX1165.0～HSX1165.15
1411 |(% colspan="1" rowspan="16" style="width:135px" %)2|(% style="width:102px" %)0～15|(% style="width:185px" %)HSX566.0～HSX566.15|(% style="width:191px" %)HSX574.0～HSX574.15
1412 |(% style="width:102px" %)16～31|(% style="width:185px" %)HSX567.0～HSX567.15|(% style="width:191px" %)HSX575.0～HSX575.15
1413 |(% style="width:102px" %)32～47|(% style="width:185px" %)HSX568.0～HSX568.15|(% style="width:191px" %)HSX576.0～HSX576.15
1414 |(% style="width:102px" %)48～63|(% style="width:185px" %)HSX569.0～HSX569.15|(% style="width:191px" %)HSX577.0～HSX577.15
1415 |(% style="width:102px" %)64～79|(% style="width:185px" %)HSX570.0～HSX570.15|(% style="width:191px" %)HSX578.0～HSX578.15
1416 |(% style="width:102px" %)80～95|(% style="width:185px" %)HSX571.0～HSX571.15|(% style="width:191px" %)HSX579.0～HSX579.15
1417 |(% style="width:102px" %)96～111|(% style="width:185px" %)HSX572.0～HSX572.15|(% style="width:191px" %)HSX580.0～HSX580.15
1418 |(% style="width:102px" %)112～127|(% style="width:185px" %)HSX573.0～HSX573.15|(% style="width:191px" %)HSX581.0～HSX581.15
1419 |(% style="width:102px" %)128～143|(% style="width:185px" %)HSX1166.0～HSX1166.15|(% style="width:191px" %)HSX1174.0～HSX1174.15
1420 |(% style="width:102px" %)144～159|(% style="width:185px" %)HSX1167.0～HSX1167.15|(% style="width:191px" %)HSX1175.0～HSX1175.15
1421 |(% style="width:102px" %)160～175|(% style="width:185px" %)HSX1168.0～HSX1168.15|(% style="width:191px" %)HSX1176.0～HSX1176.15
1422 |(% style="width:102px" %)176～191|(% style="width:185px" %)HSX1169.0～HSX1169.15|(% style="width:191px" %)HSX1177.0～HSX1177.15
1423 |(% style="width:102px" %)192～207|(% style="width:185px" %)HSX1170.0～HSX1170.15|(% style="width:191px" %)HSX1178.0～HSX1178.15
1424 |(% style="width:102px" %)208～223|(% style="width:185px" %)HSX1171.0～HSX1171.15|(% style="width:191px" %)HSX1179.0～HSX1179.15
1425 |(% style="width:102px" %)224～239|(% style="width:185px" %)HSX1172.0～HSX1172.15|(% style="width:191px" %)HSX1180.0～HSX1180.15
1426 |(% style="width:102px" %)240～255|(% style="width:185px" %)HSX1173.0～HSX1173.15|(% style="width:191px" %)HSX1181.0～HSX1181.15
1427 |(% colspan="1" rowspan="16" style="width:135px" %)3|(% style="width:102px" %)0～15|(% style="width:185px" %)HSX582.0～HSX582.15|(% style="width:191px" %)HSX590.0～HSX590.15
1428 |(% style="width:102px" %)16～31|(% style="width:185px" %)HSX583.0～HSX583.15|(% style="width:191px" %)HSX591.0～HSX591.15
1429 |(% style="width:102px" %)32～47|(% style="width:185px" %)HSX584.0～HSX584.15|(% style="width:191px" %)HSX592.0～HSX592.15
1430 |(% style="width:102px" %)48～63|(% style="width:185px" %)HSX585.0～HSX585.15|(% style="width:191px" %)HSX593.0～HSX593.15
1431 |(% style="width:102px" %)64～79|(% style="width:185px" %)HSX586.0～HSX586.15|(% style="width:191px" %)HSX594.0～HSX594.15
1432 |(% style="width:102px" %)80～95|(% style="width:185px" %)HSX587.0～HSX587.15|(% style="width:191px" %)HSX595.0～HSX595.15
1433 |(% style="width:102px" %)96～111|(% style="width:185px" %)HSX588.0～HSX588.15|(% style="width:191px" %)HSX596.0～HSX596.15
1434 |(% style="width:102px" %)112～127|(% style="width:185px" %)HSX589.0～HSX589.15|(% style="width:191px" %)HSX597.0～HSX597.15
1435 |(% style="width:102px" %)128～143|(% style="width:185px" %)HSX1182.0～HSX1182.15|(% style="width:191px" %)HSX1190.0～HSX1190.15
1436 |(% style="width:102px" %)144～159|(% style="width:185px" %)HSX1183.0～HSX1183.15|(% style="width:191px" %)HSX1191.0～HSX1191.15
1437 |(% style="width:102px" %)160～175|(% style="width:185px" %)HSX1184.0～HSX1184.15|(% style="width:191px" %)HSX1192.0～HSX1192.15
1438 |(% style="width:102px" %)176～191|(% style="width:185px" %)HSX1185.0～HSX1185.15|(% style="width:191px" %)HSX1193.0～HSX1193.15
1439 |(% style="width:102px" %)192～207|(% style="width:185px" %)HSX1186.0～HSX1186.15|(% style="width:191px" %)HSX1194.0～HSX1194.15
1440 |(% style="width:102px" %)208～223|(% style="width:185px" %)HSX1187.0～HSX1187.15|(% style="width:191px" %)HSX1195.0～HSX1195.15
1441 |(% style="width:102px" %)224～239|(% style="width:185px" %)HSX1188.0～HSX1188.15|(% style="width:191px" %)HSX1196.0～HSX1196.15
1442 |(% style="width:102px" %)240～255|(% style="width:185px" %)HSX1189.0～HSX1189.15|(% style="width:191px" %)HSX1197.0～HSX1197.15
1443 |(% colspan="1" rowspan="16" style="width:135px" %)4|(% style="width:102px" %)0～15|(% style="width:185px" %)HSX598.0～HSX598.15|(% style="width:191px" %)HSX606.0～HSX606.15
1444 |(% style="width:102px" %)16～31|(% style="width:185px" %)HSX599.0～HSX599.15|(% style="width:191px" %)HSX607.0～HSX607.15
1445 |(% style="width:102px" %)32～47|(% style="width:185px" %)HSX600.0～HSX600.15|(% style="width:191px" %)HSX608.0～HSX608.15
1446 |(% style="width:102px" %)48～63|(% style="width:185px" %)HSX601.0～HSX601.15|(% style="width:191px" %)HSX609.0～HSX609.15
1447 |(% style="width:102px" %)64～79|(% style="width:185px" %)HSX602.0～HSX602.15|(% style="width:191px" %)HSX610.0～HSX610.15
1448 |(% style="width:102px" %)80～95|(% style="width:185px" %)HSX603.0～HSX603.15|(% style="width:191px" %)HSX611.0～HSX611.15
1449 |(% style="width:102px" %)96～111|(% style="width:185px" %)HSX604.0～HSX604.15|(% style="width:191px" %)HSX612.0～HSX612.15
1450 |(% style="width:102px" %)112～127|(% style="width:185px" %)HSX605.0～HSX605.15|(% style="width:191px" %)HSX613.0～HSX613.15
1451 |(% style="width:102px" %)128～143|(% style="width:185px" %)HSX1198.0～HSX1198.15|(% style="width:191px" %)HSX1206.0～HSX1206.15
1452 |(% style="width:102px" %)144～159|(% style="width:185px" %)HSX1199.0～HSX1199.15|(% style="width:191px" %)HSX1207.0～HSX1207.15
1453 |(% style="width:102px" %)160～175|(% style="width:185px" %)HSX1200.0～HSX1200.15|(% style="width:191px" %)HSX1208.0～HSX1208.15
1454 |(% style="width:102px" %)176～191|(% style="width:185px" %)HSX1201.0～HSX1201.15|(% style="width:191px" %)HSX1209.0～HSX1209.15
1455 |(% style="width:102px" %)192～207|(% style="width:185px" %)HSX1202.0～HSX1202.15|(% style="width:191px" %)HSX1210.0～HSX1210.15
1456 |(% style="width:102px" %)208～223|(% style="width:185px" %)HSX1203.0～HSX1203.15|(% style="width:191px" %)HSX1211.0～HSX1211.15
1457 |(% style="width:102px" %)224～239|(% style="width:185px" %)HSX1204.0～HSX1204.15|(% style="width:191px" %)HSX1212.0～HSX1212.15
1458 |(% style="width:102px" %)240～255|(% style="width:185px" %)HSX1205.0～HSX1205.15|(% style="width:191px" %)HSX1213.0～HSX1213.15
1459 |(% colspan="1" rowspan="16" style="width:135px" %)5|(% style="width:102px" %)0～15|(% style="width:185px" %)HSX614.0～HSX614.15|(% style="width:191px" %)HSX622.0～HSX622.15
1460 |(% style="width:102px" %)16～31|(% style="width:185px" %)HSX615.0～HSX615.15|(% style="width:191px" %)HSX623.0～HSX623.15
1461 |(% style="width:102px" %)32～47|(% style="width:185px" %)HSX616.0～HSX616.15|(% style="width:191px" %)HSX624.0～HSX624.15
1462 |(% style="width:102px" %)48～63|(% style="width:185px" %)HSX617.0～HSX617.15|(% style="width:191px" %)HSX625.0～HSX625.15
1463 |(% style="width:102px" %)64～79|(% style="width:185px" %)HSX618.0～HSX618.15|(% style="width:191px" %)HSX626.0～HSX626.15
1464 |(% style="width:102px" %)80～95|(% style="width:185px" %)HSX619.0～HSX619.15|(% style="width:191px" %)HSX627.0～HSX627.15
1465 |(% style="width:102px" %)96～111|(% style="width:185px" %)HSX620.0～HSX620.15|(% style="width:191px" %)HSX628.0～HSX628.15
1466 |(% style="width:102px" %)112～127|(% style="width:185px" %)HSX621.0～HSX621.15|(% style="width:191px" %)HSX629.0～HSX629.15
1467 |(% style="width:102px" %)128～143|(% style="width:185px" %)HSX1214.0～HSX1214.15|(% style="width:191px" %)HSX1222.0～HSX1222.15
1468 |(% style="width:102px" %)144～159|(% style="width:185px" %)HSX1215.0～HSX1215.15|(% style="width:191px" %)HSX1223.0～HSX1223.15
1469 |(% style="width:102px" %)160～175|(% style="width:185px" %)HSX1216.0～HSX1216.15|(% style="width:191px" %)HSX1224.0～HSX1224.15
1470 |(% style="width:102px" %)176～191|(% style="width:185px" %)HSX1217.0～HSX1217.15|(% style="width:191px" %)HSX1225.0～HSX1225.15
1471 |(% style="width:102px" %)192～207|(% style="width:185px" %)HSX1218.0～HSX1218.15|(% style="width:191px" %)HSX1226.0～HSX1226.15
1472 |(% style="width:102px" %)208～223|(% style="width:185px" %)HSX1219.0～HSX1219.15|(% style="width:191px" %)HSX1227.0～HSX1227.15
1473 |(% style="width:102px" %)224～239|(% style="width:185px" %)HSX1220.0～HSX1220.15|(% style="width:191px" %)HSX1228.0～HSX1228.15
1474 |(% style="width:102px" %)240～255|(% style="width:185px" %)HSX1221.0～HSX1221.15|(% style="width:191px" %)HSX1229.0～HSX1229.15
1475 |(% colspan="1" rowspan="16" style="width:135px" %)6|(% style="width:102px" %)0～15|(% style="width:185px" %)HSX630.0～HSX630.15|(% style="width:191px" %)HSX638.0～HSX638.15
1476 |(% style="width:102px" %)16～31|(% style="width:185px" %)HSX631.0～HSX631.15|(% style="width:191px" %)HSX639.0～HSX639.15
1477 |(% style="width:102px" %)32～47|(% style="width:185px" %)HSX632.0～HSX632.15|(% style="width:191px" %)HSX640.0～HSX640.15
1478 |(% style="width:102px" %)48～63|(% style="width:185px" %)HSX633.0～HSX633.15|(% style="width:191px" %)HSX641.0～HSX641.15
1479 |(% style="width:102px" %)64～79|(% style="width:185px" %)HSX634.0～HSX634.15|(% style="width:191px" %)HSX642.0～HSX642.15
1480 |(% style="width:102px" %)80～95|(% style="width:185px" %)HSX635.0～HSX635.15|(% style="width:191px" %)HSX643.0～HSX643.15
1481 |(% style="width:102px" %)96～111|(% style="width:185px" %)HSX636.0～HSX636.15|(% style="width:191px" %)HSX644.0～HSX644.15
1482 |(% style="width:102px" %)112～127|(% style="width:185px" %)HSX637.0～HSX637.15|(% style="width:191px" %)HSX645.0～HSX645.15
1483 |(% style="width:102px" %)128～143|(% style="width:185px" %)HSX1230.0～HSX1230.15|(% style="width:191px" %)HSX1238.0～HSX1238.15
1484 |(% style="width:102px" %)144～159|(% style="width:185px" %)HSX1231.0～HSX1231.15|(% style="width:191px" %)HSX1239.0～HSX1239.15
1485 |(% style="width:102px" %)160～175|(% style="width:185px" %)HSX1232.0～HSX1232.15|(% style="width:191px" %)HSX1240.0～HSX1240.15
1486 |(% style="width:102px" %)176～191|(% style="width:185px" %)HSX1233.0～HSX1233.15|(% style="width:191px" %)HSX1241.0～HSX1241.15
1487 |(% style="width:102px" %)192～207|(% style="width:185px" %)HSX1234.0～HSX1234.15|(% style="width:191px" %)HSX1242.0～HSX1242.15
1488 |(% style="width:102px" %)208～223|(% style="width:185px" %)HSX1235.0～HSX1235.15|(% style="width:191px" %)HSX1243.0～HSX1243.15
1489 |(% style="width:102px" %)224～239|(% style="width:185px" %)HSX1236.0～HSX1236.15|(% style="width:191px" %)HSX1244.0～HSX1244.15
1490 |(% style="width:102px" %)240～255|(% style="width:185px" %)HSX1237.0～HSX1237.15|(% style="width:191px" %)HSX1245.0～HSX1245.15
1491 |(% colspan="1" rowspan="16" style="width:135px" %)7|(% style="width:102px" %)0～15|(% style="width:185px" %)HSX646.0～HSX646.15|(% style="width:191px" %)HSX654.0～HSX654.15
1492 |(% style="width:102px" %)16～31|(% style="width:185px" %)HSX647.0～HSX647.15|(% style="width:191px" %)HSX655.0～HSX655.15
1493 |(% style="width:102px" %)32～47|(% style="width:185px" %)HSX648.0～HSX648.15|(% style="width:191px" %)HSX656.0～HSX656.15
1494 |(% style="width:102px" %)48～63|(% style="width:185px" %)HSX649.0～HSX649.15|(% style="width:191px" %)HSX657.0～HSX657.15
1495 |(% style="width:102px" %)64～79|(% style="width:185px" %)HSX650.0～HSX650.15|(% style="width:191px" %)HSX658.0～HSX658.15
1496 |(% style="width:102px" %)80～95|(% style="width:185px" %)HSX651.0～HSX651.15|(% style="width:191px" %)HSX659.0～HSX659.15
1497 |(% style="width:102px" %)96～111|(% style="width:185px" %)HSX652.0～HSX652.15|(% style="width:191px" %)HSX660.0～HSX660.15
1498 |(% style="width:102px" %)112～127|(% style="width:185px" %)HSX653.0～HSX653.15|(% style="width:191px" %)HSX661.0～HSX661.15
1499 |(% style="width:102px" %)128～143|(% style="width:185px" %)HSX1246.0～HSX1246.15|(% style="width:191px" %)HSX1254.0～HSX1254.15
1500 |(% style="width:102px" %)144～159|(% style="width:185px" %)HSX1247.0～HSX1247.15|(% style="width:191px" %)HSX1255.0～HSX1255.15
1501 |(% style="width:102px" %)160～175|(% style="width:185px" %)HSX1248.0～HSX1248.15|(% style="width:191px" %)HSX1256.0～HSX1256.15
1502 |(% style="width:102px" %)176～191|(% style="width:185px" %)HSX1249.0～HSX1249.15|(% style="width:191px" %)HSX1257.0～HSX1257.15
1503 |(% style="width:102px" %)192～207|(% style="width:185px" %)HSX1250.0～HSX1250.15|(% style="width:191px" %)HSX1258.0～HSX1258.15
1504 |(% style="width:102px" %)208～223|(% style="width:185px" %)HSX1251.0～HSX1251.15|(% style="width:191px" %)HSX1259.0～HSX1259.15
1505 |(% style="width:102px" %)224～239|(% style="width:185px" %)HSX1252.0～HSX1252.15|(% style="width:191px" %)HSX1260.0～HSX1260.15
1506 |(% style="width:102px" %)240～255|(% style="width:185px" %)HSX1253.0～HSX1253.15|(% style="width:191px" %)HSX1261.0～HSX1261.15
1507 |(% colspan="1" rowspan="16" style="width:135px" %)8|(% style="width:102px" %)0～15|(% style="width:185px" %)HSX662.0～HSX662.15|(% style="width:191px" %)HSX670.0～HSX670.15
1508 |(% style="width:102px" %)16～31|(% style="width:185px" %)HSX663.0～HSX663.15|(% style="width:191px" %)HSX671.0～HSX671.15
1509 |(% style="width:102px" %)32～47|(% style="width:185px" %)HSX664.0～HSX664.15|(% style="width:191px" %)HSX672.0～HSX672.15
1510 |(% style="width:102px" %)48～63|(% style="width:185px" %)HSX665.0～HSX665.15|(% style="width:191px" %)HSX673.0～HSX673.15
1511 |(% style="width:102px" %)64～79|(% style="width:185px" %)HSX666.0～HSX666.15|(% style="width:191px" %)HSX674.0～HSX674.15
1512 |(% style="width:102px" %)80～95|(% style="width:185px" %)HSX667.0～HSX667.15|(% style="width:191px" %)HSX675.0～HSX675.15
1513 |(% style="width:102px" %)96～111|(% style="width:185px" %)HSX668.0～HSX668.15|(% style="width:191px" %)HSX676.0～HSX676.15
1514 |(% style="width:102px" %)112～127|(% style="width:185px" %)HSX669.0～HSX669.15|(% style="width:191px" %)HSX677.0～HSX677.15
1515 |(% style="width:102px" %)128～143|(% style="width:185px" %)HSX1262.0～HSX1262.15|(% style="width:191px" %)HSX1270.0～HSX1270.15
1516 |(% style="width:102px" %)144～159|(% style="width:185px" %)HSX1263.0～HSX1263.15|(% style="width:191px" %)HSX1271.0～HSX1271.15
1517 |(% style="width:102px" %)160～175|(% style="width:185px" %)HSX1264.0～HSX1264.15|(% style="width:191px" %)HSX1272.0～HSX1272.15
1518 |(% style="width:102px" %)176～191|(% style="width:185px" %)HSX1265.0～HSX1265.15|(% style="width:191px" %)HSX1273.0～HSX1273.15
1519 |(% style="width:102px" %)192～207|(% style="width:185px" %)HSX1266.0～HSX1266.15|(% style="width:191px" %)HSX1274.0～HSX1274.15
1520 |(% style="width:102px" %)208～223|(% style="width:185px" %)HSX1267.0～HSX1267.15|(% style="width:191px" %)HSX1275.0～HSX1275.15
1521 |(% style="width:102px" %)224～239|(% style="width:185px" %)HSX1268.0～HSX1268.15|(% style="width:191px" %)HSX1276.0～HSX1276.15
1522 |(% style="width:102px" %)240～255|(% style="width:185px" %)HSX1269.0～HSX1269.15|(% style="width:191px" %)HSX1277.0～HSX1277.15
1523 |(% rowspan="4" style="width:135px" %)9|(% style="width:102px" %)0~~15|(% style="width:185px" %)HSX678.0~~678.15|(% style="width:191px" %)HSX686.0~~686.15
1524 |(% style="width:102px" %)16~~31|(% style="width:185px" %)HSX679.0~~679.15|(% style="width:191px" %)HSX687.0~~687.15
1525 |(% style="width:102px" %)32~~47|(% style="width:185px" %)HSX680.0~~680.15|(% style="width:191px" %)HSX688.0~~688.15
1526 |(% style="width:102px" %)48~~63|(% style="width:185px" %)HSX681.0~~681.15|(% style="width:191px" %)HSX689.0~~689.15
1527 |(% rowspan="4" style="width:135px" %)10|(% style="width:102px" %)0~~15|(% style="width:185px" %)HSX694.0~~694.15|(% style="width:191px" %)HSX702.0~~702.15
1528 |(% style="width:102px" %)16~~31|(% style="width:185px" %)HSX695.0~~695.15|(% style="width:191px" %)HSX703.0~~703.15
1529 |(% style="width:102px" %)32~~47|(% style="width:185px" %)HSX696.0~~696.15|(% style="width:191px" %)HSX704.0~~704.15
1530 |(% style="width:102px" %)48~~63|(% style="width:185px" %)HSX697.0~~697.15|(% style="width:191px" %)HSX705.0~~705.15
1531 |(% rowspan="4" style="width:135px" %)11|(% style="width:102px" %)0~~15|(% style="width:185px" %)HSX710.0~~710.15|(% style="width:191px" %)HSX718.0~~718.15
1532 |(% style="width:102px" %)16~~31|(% style="width:185px" %)HSX711.0~~711.15|(% style="width:191px" %)HSX719.0~~719.15
1533 |(% style="width:102px" %)32~~47|(% style="width:185px" %)HSX712.0~~712.15|(% style="width:191px" %)HSX720.0~~720.15
1534 |(% style="width:102px" %)48~~63|(% style="width:185px" %)HSX713.0~~713.15|(% style="width:191px" %)HSX721.0~~721.15
1535 |(% rowspan="4" style="width:135px" %)12|(% style="width:102px" %)0~~15|(% style="width:185px" %)HSX726.0~~726.15|(% style="width:191px" %)HSX734.0~~734.15
1536 |(% style="width:102px" %)16~~31|(% style="width:185px" %)HSX727.0~~727.15|(% style="width:191px" %)HSX735.0~~735.15
1537 |(% style="width:102px" %)32~~47|(% style="width:185px" %)HSX728.0~~728.15|(% style="width:191px" %)HSX736.0~~736.15
1538 |(% style="width:102px" %)48~~63|(% style="width:185px" %)HSX729.0~~729.15|(% style="width:191px" %)HSX737.0~~737.15
1539 |(% rowspan="4" style="width:135px" %)13|(% style="width:102px" %)0~~15|(% style="width:185px" %)HSX742.0~~742.15|(% style="width:191px" %)HSX750.0~~750.15
1540 |(% style="width:102px" %)16~~31|(% style="width:185px" %)HSX743.0~~743.15|(% style="width:191px" %)HSX751.0~~751.15
1541 |(% style="width:102px" %)32~~47|(% style="width:185px" %)HSX744.0~~744.15|(% style="width:191px" %)HSX752.0~~752.15
1542 |(% style="width:102px" %)48~~63|(% style="width:185px" %)HSX745.0~~745.15|(% style="width:191px" %)HSX753.0~~753.15
1543 |(% rowspan="4" style="width:135px" %)14|(% style="width:102px" %)0~~15|(% style="width:185px" %)HSX758.0~~758.15|(% style="width:191px" %)HSX766.0~~766.15
1544 |(% style="width:102px" %)16~~31|(% style="width:185px" %)HSX759.0~~759.15|(% style="width:191px" %)HSX767.0~~767.15
1545 |(% style="width:102px" %)32~~47|(% style="width:185px" %)HSX760.0~~760.15|(% style="width:191px" %)HSX768.0~~768.15
1546 |(% style="width:102px" %)48~~63|(% style="width:185px" %)HSX761.0~~761.15|(% style="width:191px" %)HSX769.0~~769.15
1547 |(% rowspan="4" style="width:135px" %)15|(% style="width:102px" %)0~~15|(% style="width:185px" %)HSX774.0~~774.15|(% style="width:191px" %)HSX782.0~~782.15
1548 |(% style="width:102px" %)16~~31|(% style="width:185px" %)HSX775.0~~775.15|(% style="width:191px" %)HSX783.0~~783.15
1549 |(% style="width:102px" %)32~~47|(% style="width:185px" %)HSX776.0~~776.15|(% style="width:191px" %)HSX784.0~~784.15
1550 |(% style="width:102px" %)48~~63|(% style="width:185px" %)HSX777.0~~777.15|(% style="width:191px" %)HSX785.0~~785.15
1551 |(% rowspan="4" style="width:135px" %)16|(% style="width:102px" %)0~~15|(% style="width:185px" %)HSX790.0~~790.15|(% style="width:191px" %)HSX798.0~~798.15
1552 |(% style="width:102px" %)16~~31|(% style="width:185px" %)HSX791.0~~791.15|(% style="width:191px" %)HSX799.0~~799.15
1553 |(% style="width:102px" %)32~~47|(% style="width:185px" %)HSX792.0~~792.15|(% style="width:191px" %)HSX800.0~~800.15
1554 |(% style="width:102px" %)48~~63|(% style="width:185px" %)HSX793.0~~793.15|(% style="width:191px" %)HSX801.0~~801.15