Skip to Content

Wiki source code of 13.HMI Internal Registers

Version 31.1 by Mora Zhou on 2023/11/21 16:19
Show last authors
1 = **Introduction** =
2
3 HMI provide four types of HMI address for user. You can use them as temporary variables of the program. The use is consistent with the way access to the PLC register. You could also reference through the address, PIStudio provides three types of such memory.
4
5 *HSW, HDW, HUW, HAW are word address, HSX, HDX, HUX, HAX are bit address.
6
7 * **System data area (HSW): **A special register defined by the system.
8 * **Data storage area (HDW/HDX): **Users store user data.
9 * **System data area (HUW): **A special register defined by the system.
10 * **System Data (HAW)**: System register used for power-off save.
11 * **Recipe index area (RPW): **System register used for recipe index.
12
13 HMI internal registers are divided into bit address and word address, which can be accessed in two ways (take HDW as an example).
14
15 * Access as word with the prefix "HDW".
16 ** HDW0 means the 1st word of system data area. HDW1 means the 2nd word of system data area.
17 * Access as bit with the prefix "HDX".  The number before "." i".  The number before Access in bit with the prefix "HD".  The number before Access in bit with the prefix "HDX". The number before "." indicates the number of the word. The number after "." indicates the bit number of the word.
18 ** HDX1020.12 means to access the system data area in bit mode, the specific location is the 13th bit of the 1020 word.
19
20 (% class="box infomessage" %)
21 (((
22 **✎Note:**
23
24 * Addresses in HDX are the bits from words in HDW, so be careful when using addresses. For example, HDX1020.12 is the 13th bit to access the 1020 word. The value of this bit is the same as that of the word accessed through HDW001020. The 13th bit of this word is actually the same bit as HDX1020.12.
25 * The address of the bit address HDX is with a decimal point while word addresses are integers.
26 )))
27
28 = Address ranges table =
29
30 (% style="text-align:center" %)
31 [[image:6.png]]
32
33 = **Data storage area (HDW/HDX)** =
34
35 It is used to save the temporary data of project.
36
37 1. Access as word, and serial number range is from HDW0 to HDW299999.
38 1. Access as bit, and serial number range is from HDX0.0 to HDX299999.15.
39
40 = **Power-down save area (HAW/HAX)** =
41
42 It is system registers used for power-off save.
43
44 1. Access as word, and serial number range is from HAW0 to HAW199999.
45 1. Access as bit, and serial number range is from HAX0.0 to HAX199999.15.
46
47 (% class="box infomessage" %)
48 (((
49 **✎Note:**
50
51 * HAW/HAX is power-down retention. The register of this type is able to save the data before the power-down.
52 * To avoid possible device failure, do not immediately power off and reboot when configuring the power-down save addre
53 )))
54
55 = **Recipe index area (RPW)** =
56
57 It is system recipe data power-off save register. The range is from RPW000000 to RPW990450.
58
59 (% class="box infomessage" %)
60 (((
61 **✎Note:**
62
63 * RPW is power-down retention. The register of this type is able to save the data before the power-down.
64 * To avoid possible device failure, do not immediately power off and reboot when configuring the power-down save addre
65 )))
66
67 = **Single user data area (HUW/HUX)** =
68
69 It is used for system special registers (reserved by system).
70
71 1. Access as word, and serial number range is from HUW0 to HUW1599.
72 1. Access as bit, and serial number range is from HUX0.0 to HUX1599.15.
73
74 **✎Note:**
75
76 * HUW/HUX is a system special register, so please check the system special register list during use. Please use the address specified in the table and do not use the address which is not mentioned in the table.
77
78 (% class="table-bordered" %)
79 |=**Special register address**|=**Description**|=**Function**
80 |=HUW0|Screen switch|A single terminal controls the screen switching, and all terminals do not affect each other.
81 |=HUW110~~HUW119|(% rowspan="26" %)Addresses of the built-in keyboard|The T9 input method stores the selected seria number length
82 |=HUW120~~HUW129|The T9 input method stores the selected Chinese Pinyin length
83 |=HUW135|Input method: first input
84 |=HUW136|Button: T9 Chinese Pinyin page
85 |=HUW137|Button: T9 Chinese characters page
86 |=HUW138|Button: symbol
87 |=HUW139|Button: switch
88 |=HUW140|Button: Chinese characters 1
89 |=HUW142|Button: Chinese characters 2
90 |=HUW144|Button: Chinese characters 3
91 |=HUW146|Button: Chinese characters 4
92 |=HUW148|Button: Chinese characters 5
93 |=HUW150|Button: Chinese characters 6
94 |=HUW152|Button: Chinese characters 7
95 |=HUW154|Button: Chinese characters 8
96 |=HUW156|Button: Chinese characters 9
97 |=HUW158|Button: Chinese characters 10
98 |=HUW160~~HUW169|Button: Chinese Pinyin 1
99 |=HUW170~~HUW179|Button: Chinese Pinyin 2
100 |=HUW180~~HUW189|Button: Chinese Pinyin 3
101 |=HUW190~~HUW199|Button: Chinese Pinyin 4
102 |=HUW200~~HUW699|Input method cache length
103 |=HUW700~~HUW749|Minimum value of the input method
104 |=HUW750~~HUW799|Maximum value of the input method
105 |=HUW800|Case switching of the input method
106 |=HUW801~~HUW900|Input method format cache length
107 |=HUW1000|(% rowspan="12" %)Addresses of user permission|OK (Sign in)
108 |=HUW1001|Result of operation
109 |=HUW1002~~1005|Old password
110 |=HUW1006~~1009|New password
111 |=HUW1010~~1013|Confirm password
112 |=HUW1014~~1029|New user name
113 |=HUW1030~~1157|States information of user permission
114 |=HUW1158~~1335|User name (Only or drop-down list object)
115 |=HUW1336~~1345|User name description or note
116 |=HUW1347|Hidden function configurations
117 |=HUW1348|Permission settings
118 |=HUW1349|Current user name
119 |=HUW1382|User sign in way|(((
120 * 0: Select the user name from drop-down list object for signing in
121 * 1: Enter the user name in Character Input/Display object for signing in (HUW1014)
122 )))
123 |=HUW1400|Time interval from last operation|(((
124 Shows how long the touch screen has not been clicked, in seconds. 32-bit unsigned integer
125
126 **✎Note:** Clicking by different users will only clear the corresponding register of the currently operating terminal, and the registers on other terminals (such as mobile phones, computers) will not be cleared.
127 )))
128 |=HUW1402|Keyboard note|It saves the text information of the keyboard notes when clicking object(HUW1402-HUW1433)
129 |=HUW1436|Current object level|Indicate current object security level
130
131 = **Special data area (HSW/HSX)** =
132
133 It is used for system special registers (reserved by system).
134
135 1. Access as word, and serial number range is from HSW0 to HSW49999. (HSW10000 to HSW19999 are the power-off storage areas)
136 1. Access as bit, and serial number range is from HSX0.0 to HSX49999.15.
137
138 **✎Note:**
139
140 * HSW / HSX are a system special register, so please check the system special register list during use. Please use the address specified in the table and do not use the address which is not mentioned in the table.
141 * To avoid possible device failure, do not immediately power off and reboot when configuring the power-down save address.
142
143 (% class="table-bordered" style="width:1024px" %)
144 |=(% scope="row" style="width: 160px;" %)**Address**|=(% style="width: 282px;" %)**Function**|=(% style="width: 452px;" %)**Description**
145 |=(% style="width: 160px;" %)HSW0|(% style="width:282px" %)Language switch|(% style="width:452px" %)Multiple language could be set in the project, HMI support maximum 8 languages. (Power-down save supported)
146 |=(% style="width: 160px;" %)HSW1|(% style="width:282px" %)Beep frequency (Only valid in HMI V1.0 System)|(% style="width:452px" %)Frequency range: 0~~4000
147 |=(% style="width: 160px;" %)HSW2|(% style="width:282px" %)Beep volume (Only valid in HMI V1.0 System)|(% style="width:452px" %)Volume range: 0~~80
148 |=(% style="width: 160px;" %)HSW3|(% style="width:282px" %)Beep time|(% style="width:452px" %)Unit: ms
149 |=(% style="width: 160px;" %)HSW4|(% style="width:282px" %)Beep whether enable or not|(% style="width:452px" %)(((
150 * =0: Enable.
151 * =1: Disable.
152 )))
153 |=(% style="width: 160px;" %)HSW5|(% style="width:282px" %)(((
154 Alarm indicator
155 )))|(% style="width:452px" %)(((
156 * =0: Currently no alarm or all alarms have been off.
157 * =1: Currently alarm(s) still keep in on.
158 )))
159 |=(% style="width: 160px;" %)HSW6~~HSW7|(% style="width:282px" %)Number of alarms|(% style="width:452px" %)The number of alarm (it also includes the records of alarm confirmed)
160 |=(% style="width: 160px;" %)HSW8|(% style="width:282px" %)Number of unconfirmed history alarm|(% style="width:452px" %)The number of unconfirmed history alarm
161 |=(% style="width: 160px;" %)HSW9|(% style="width:282px" %)Time out prompt|(% style="width:452px" %)(((
162 * =0: Enable
163 * =1: Disable
164 )))
165 |=(% style="width: 160px;" %)HSW12|(% style="width:282px" %)Screen swicth|(% style="width:452px" %)(((
166 * = 0: Only HSW control the screen switch, and the sreens of all users will switch.
167 * = 1: Only HUW control the screen switch, and all users do not affect each other.
168 )))
169 |=(% style="width: 160px;" %)HSW13|(% style="width:282px" %)Screen switch register|(% style="width:452px" %)Equal to different values, the screen jumps to the corresponding screen number of the screen.
170 |=(% style="width: 160px;" %)HSW24|(% style="width:282px" %)Reboot HMI|=(% style="width: 452px;" %)1: Reboot
171 |=(% style="width: 160px;" %)HSW28|(% style="width:282px" %)Local time: year|(% style="width:452px" %)Range: 0~~9999 (system reserved)
172 |=(% style="width: 160px;" %)HSW29|(% style="width:282px" %)Local time: month|(% style="width:452px" %)Range: 01~~12 (system reserved)
173 |=(% style="width: 160px;" %)HSW30|(% style="width:282px" %)Local time: day|(% style="width:452px" %)Range: 01~~31 (system reserved)
174 |=(% style="width: 160px;" %)HSW31|(% style="width:282px" %)Local time: hour|(% style="width:452px" %)Range: 0~~23 (system reserved)
175 |=(% style="width: 160px;" %)HSW32|(% style="width:282px" %)Local time: minute|(% style="width:452px" %)Range: 0~~59 (system reserved)
176 |=(% style="width: 160px;" %)HSW33|(% style="width:282px" %)Local time: second|(% style="width:452px" %)Range: 0~~59 (system reserved)
177 |=(% style="width: 160px;" %)HSW34|(% style="width:282px" %)Local time: week|(% style="width:452px" %)(((
178 * =0: Sunday.
179 * =1: Monday.
180 * =2: Tuesday.
181 * =3: Wednesday.
182 * =4: Thursday.
183 * =5: Friday.
184 * =6: Saturday.
185 )))
186 |=(% style="width: 160px;" %)HSW39|(% style="width:282px" %)Beep type(Only valid in HMI V2.0 System)|(% style="width:452px" %)Type range: 1-5, Default is 1.
187 |=(% style="width: 160px;" %)HSW134|(% style="width:282px" %)(((
188 Whether the Script is read through
189
190
191 )))|(% style="width:452px" %)(((
192 **✎Note:** If want to read-only or write-only, please enable this settings.
193
194 * =0: Read from HMI cache(Default)
195 * =1: Read from PLC directly
196 )))
197 |=(% style="width: 160px;" %)HSW135|(% style="width:282px" %)Confirm installment password|(% style="width:452px" %)Confirm button for installment password
198 |=(% style="width: 160px;" %)HSW151|(% style="width:282px" %)Installment due|(% style="width:452px" %)Number of days to installment due
199 |=(% style="width: 160px;" %)HSW185~~200|(% style="width:282px" %)Installment password|(% style="width:452px" %)Enter installment password
200 |=(% style="width: 160px;" %)HSW242|(% style="width:282px" %)(((
201 Prompt result of recipe operation
202
203 * Upload: Data is written from address to file
204 * Download: Data is written from a file to an address
205 )))|(% style="width:452px" %)(((
206 * =1: Download recipe, start
207 * =2: Download recipe, execution error
208 * =3: Download recipe, files don't exist
209 * =4: Download recipe, members don't exist
210 * =5: Download recipe, groups don't exist
211 * =6: Download recipe, success
212 * =7: Upload recipe, start
213 * =8: Upload recipe, execution error
214 * =9: Upload recipe, files don't exist
215 * =10: Upload recipe, members don't exist
216 * =11: Upload recipe, groups don't exist
217 * =12: Upload recipe, success
218 * =13: Insert recipe, start
219 * =14: Insert recipe, execution error
220 * =15: Insert recipe, files don't exist
221 * =16: Insert recipe, members don't exist
222 * =17: Insert recipe, groups don't exist
223 * =18: Insert recipe, success
224 * =19: Delete recipe, start
225 * =20: Delete recipe, execution error
226 * =21: Delete recipe, files don't exist
227 * =22: Delete recipe, members don't exist
228 * =23: Delete recipe, groups don't exist
229 * =24: Delete recipe, success
230 * =25: Delete and sort recipe, start
231 * =26: Delete recipe and sort, execution error
232 * =27: Delete recipe and sort, files don't exist
233 * =28: Delete recipe and sort, members don't exist
234 * =29: Delete recipe and sort, groups don't exist
235 * =30: Delete recipe and sort, success
236 * =37: CSV recipe files import successfully
237 * =38: CSV recipe files import failed.
238 )))
239 |=(% style="width: 160px;" %)HSW243|(% style="width:282px" %)Prompt result of recipe index|(% style="width:452px" %)(((
240 * =31: Recipe index, start
241 * =32: Recipe index, execution error
242 * =33: Recipe index, files don't exist
243 * =34: Recipe index, members don't exist
244 * =35: Recipe index, groups don't exist
245 * =36: Recipe index, success
246 )))
247 |=(% style="width: 160px;" %)HSW521|(% style="width:282px" %)Delete graph and alarm record|(% style="width:452px" %)(((
248 * =0: No operation
249 * =1: HSX521.0=1, delete all records.
250 * =2: HSX521.1=1, delete all trend graph.
251 * =4: HSX521.2=1, delete all alarms.
252 * =16: HSX521.4=1, delete history XY plot.
253 * =32: HSX521.5=1, delete data records in SD card or USB flash disk;(Please make a setting which is saved to USB flash disk or SD card in project setting).
254 * =64: HSX521.6=1, delete alarms records in SD card or USB flash disk; (Please make a setting which is saved to USB flash disk or SD card in project setting).
255 )))
256 |=(% style="width: 160px;" %)HSW522|(% style="width:282px" %)Copy and paste the alarm/data files in flash to the USB flash disk|(% style="width:452px" %)(((
257 * =0: No operation
258 * =1: HSX522.0=1, copy all record
259 * =2: HSX522.2=1, copy history XY trend graph
260 * =8: HSX522.3=1, copy alarm record
261 * =32: HSX522.5=1, copy recipe
262 )))
263 |=(% style="width: 160px;" %)HSW523|(% style="width:282px" %)Copy and paste the alarm/data files in flash to the SD card|(% style="width:452px" %)(((
264 * =0: No operation
265 * =1: HSX523.0=1, copy all record
266 * =4: HSX523.2=1, copy history XY trend graph
267 * =8: HSX523.3=1, copy alarm record
268 )))
269 |=(% style="width: 160px;" %)HSW524|(% style="width:282px" %)Copy and paste the alarm/data files in SD card to the USB flash disk|(% style="width:452px" %)(((
270 * =0: no operation
271 * =4: HSX524.2=1, copy history XY trend graph
272 * =8: HSX524.3=1, copy alarm record
273 * =16: HSX524.4=1, copy history alarm record
274 * =32: HSX524.5=1, copy data record
275 )))
276 |=(% style="width: 160px;" %)HSW525|(% style="width:282px" %)Copy and paste the alarm/data files in USB flash disk to SD card|(% style="width:452px" %)(((
277 * =0: no operation
278 * =4: HSX525.2=1, copy history XY trend graph
279 * =8: HSX525.3=1, copy alarm record
280 * =16: HSX525.4=1, copy history alarm record
281 * =32: HSX525.5= 1, copy data record
282 )))
283 |=(% style="width: 160px;" %)HSW526|(% style="width:282px" %)Delete file list|(% style="width:452px" %)(((
284 * =0: no operation
285 * =1: HSX526.0=1, delete designated file
286 * =2: HSX526.1=1, delete all files
287 )))
288 |=(% style="width: 160px;" %)HSW527|(% style="width:282px" %)Eject USB flash disk/SD card|(% style="width:452px" %)(((
289 * =0: No operation
290 * =1: Eject USB flash disk
291 * =2: Eject SD card
292 )))
293 |=(% style="width: 160px;" %)HSW528|(% style="width:282px" %)The state of USB flash disk|(% style="width:452px" %)(((
294 * =1: USB flash disk is detected
295 * =2: Ejecting USB flash disk, please waiting…
296 * =3: USB flash disk ejected
297 )))
298 |=(% style="width: 160px;" %)HSW529|(% style="width:282px" %)The state of SD card|(% style="width:452px" %)(((
299 * =1: SD card is detected
300 * =2: Ejecting SD card, please waiting…
301 * =3: SD card ejected
302 )))
303 |=(% style="width: 160px;" %)HSW550~~849|(% style="width:282px" %)Communication control|(% style="width:452px" %)For communication control and communication lamp (please refer to "[[communication control>>http://13.229.109.52:8080/wiki/pistudio/view/Helps/13.HMI%20internal%20registers/#HCommunicationcontrol]]" sector for detailed)
304 |=(% style="width: 160px;" %)HSW850|(% style="width:282px" %)(((
305 Network state
306
307 (4G, WIFI and Ethernet)
308 )))|(% style="width:452px" %)(((
309 In HMI V1.0
310
311 * =0: Network is disconnected.
312 * =1: only LAN connected, and APP can't access HMI.
313 * =2: WECON Cloud connected , APP and web could access HMI.
314
315 In HMI V2.0
316
317 * =0: Network is disconnected.
318 * =1: Network is connected.
319 )))
320 |=(% style="width: 160px;" %)HSW855|(% style="width:282px" %)Backlight Control|(% style="width:452px" %)(((
321 * HSX855.0=1: turn on the backlight and reset automatically after being triggered.
322 * HSX855.1=1: turn off the backlight and reset automatically after being triggered.
323 )))
324 |=(% style="width: 160px;" %)HSW856|(% style="width:282px" %)Whether to close the indirect screen when the current screen is switched to the other screen)|(% style="width:452px" %)(((
325 * =0: close the sub-screen, including the indirect screen;
326 * =1: not to close.
327 )))
328 |=(% style="width: 160px;" %)HSW857|(% style="width:282px" %)Permission in remote access (web page, mobile APP, cloud platform, etc.)|(% style="width:452px" %)(((
329 * =0: users could switch the screen, control the switch and update data in remote access.
330 * =1: users could only control function switch (only switch the screen), view data and switch state, but could not operate or update them.
331 * =2: users could neither operate the screen switch, nor switch operation and data modification, only view. (The ig series and 8000/9000 series with -R after system upgrade)
332 )))
333 |=(% style="width: 160px;" %)HSW860~~861|(% style="width:282px" %)Data partition remaining space|(% style="width:452px" %)Display the data partition remaining space, updated every minute, unit(**kB**)
334 |=(% style="width: 160px;" %)HSW880|(% style="width:282px" %)Enable data partition remaining space|(% style="width:452px" %)(((
335 ~=1, able to view the data partition remaining space from HSW860~~861.
336
337 ~=Other value except 1, disable the viewing function.
338 )))
339 |=(% style="width: 160px;" %)HSW881|(% style="width:282px" %)Storage of Record files|(% style="width:452px" %)(((
340 It is used for controlling saving alarm/data record files to U disk / SD card.
341
342 * = 0: Save to storage.
343 * = 1: Don't save to storage.
344 )))
345 |=(% style="width: 160px;" %)HSW882|(% style="width:282px" %)Storage device status|(% style="width:452px" %)(((
346 * HDX882.0=0 USB flash doesn't execute storage or storage finished.
347 * HDX882.0=1 USB flash is reading data, don't remove USB flash.
348 * HDX882.1=0 SD card doesn't execute storage or storage finished.
349 * HDX882.1=1 SD card is reading data, don't remove SD card.
350 )))
351 |=(% style="width: 160px;" %)HSW884|(% style="width:282px" %)Enter the system network configuration interface|(% style="width:452px" %)(((
352 * =0: Do not enter the network configuration interface
353 * =1: Enter the system network configuration interface.
354 ** ig series HMI only supports to enter the system interface
355
356 )))
357 |=(% style="width: 160px;" %)HSW885|(% style="width:282px" %)When the control object hides the address is read failed (communication failure), set the display mode of the object|(% style="width:452px" %)(((
358 * = 0: displayed by object setting.
359 * =1: control address read failure, the address control of all objects is hidden, not displayed.
360 * =2: control address read failure, the address control of all objects is displayed, not hidden.
361 )))
362 |=(% style="width: 160px;" %)HSW893|(% style="width:282px" %)(((
363 User Permission Control Address, same as HUW1000 feature, please refer to chapter "[[User Permission>>http://13.229.109.52:8080/wiki/pistudio/view/Helps/08.Basic%20Function/#HUserPermission]]"
364
365 **✎Note: **This address can only take effect when it is operated in the real HMI, and the operation is invalid on Web/App side.
366 )))|(% style="width:452px" %)(((
367 * =1: User Log in
368 * =2: Change User password
369 * =3: User Log out
370 * =4: New user
371 * =5: Delete user
372 * =6: Add user rights
373 * =8: Add Hide features
374 * =9: Delete Profile
375 * =10: Export Profile
376 * =11: Import profile
377 * =12: Export log file
378 * =13: Delete log file
379 )))
380 |=(% style="width: 160px;" %)HSW900|(% style="width:282px" %)Quick update frequency settings for objects|(% style="width:452px" %)(((
381 Valid when the object is enabled for "quick update". Default: 5.
382
383 Range: 1 (fastest) ~~ 50 (slowest)
384 )))
385 |=(% style="width: 160px;" %)HSW920|(% style="width:282px" %)Static mode Maximum periods|(% style="width:452px" %)Numeric Input/ Display (range: 0-12)
386 |=(% style="width: 160px;" %)HSW921 ~~ 924|(% style="width:282px" %)Static mode Admin key|(% style="width:452px" %)Character Input/ Display (length: 8)
387 |=(% style="width: 160px;" %)HSW925 ~~ 928|(% style="width:282px" %)1^^st^^ period key (Static mode)|(% style="width:452px" %)Character Input/ Display (length: 8)
388 |=(% style="width: 160px;" %)HSW929 ~~ 933|(% style="width:282px" %)1^^st^^ expiry time (Static mode)|(% style="width:452px" %)Numeric Input/ Display (YYYYMMDDHHMM)
389 |=(% style="width: 160px;" %)HSW935 ~~ 938|(% style="width:282px" %)2^^nd^^ period key (Static mode)|(% style="width:452px" %)Character Input/ Display (length: 8)
390 |=(% style="width: 160px;" %)HSW939 ~~ 943|(% style="width:282px" %)2^^nd ^^expiry time (Static mode)|(% style="width:452px" %)Numeric Input/ Display (YYYYMMDDHHMM)
391 |=(% style="width: 160px;" %)HSW945 ~~ 948|(% style="width:282px" %)3^^rd^^ period key (Static mode)|(% style="width:452px" %)Character Input/ Display (length: 8)
392 |=(% style="width: 160px;" %)HSW949 ~~ 953|(% style="width:282px" %)3^^rd ^^expiry time (Static mode)|(% style="width:452px" %)Numeric Input/ Display (YYYYMMDDHHMM)
393 |=(% style="width: 160px;" %)HSW955 ~~ 958|(% style="width:282px" %)4^^th^^ period key (Static mode)|(% style="width:452px" %)Character Input/ Display (length: 8)
394 |=(% style="width: 160px;" %)HSW959 ~~ 963|(% style="width:282px" %)4^^th ^^expiry time (Static mode)|(% style="width:452px" %)Numeric Input/ Display (YYYYMMDDHHMM)
395 |=(% style="width: 160px;" %)HSW965 ~~ 968|(% style="width:282px" %)5^^th^^ period key (Static mode)|(% style="width:452px" %)Character Input/ Display (length: 8)
396 |=(% style="width: 160px;" %)HSW969 ~~ 973|(% style="width:282px" %)5^^th ^^expiry time (Static mode)|(% style="width:452px" %)Numeric Input/ Display (YYYYMMDDHHMM)
397 |=(% style="width: 160px;" %)HSW975 ~~ 978|(% style="width:282px" %)6^^th^^ period key (Static mode)|(% style="width:452px" %)Character Input/ Display (length: 8)
398 |=(% style="width: 160px;" %)HSW979 ~~ 983|(% style="width:282px" %)6^^th ^^expiry time (Static mode)|(% style="width:452px" %)Numeric Input/ Display (YYYYMMDDHHMM)
399 |=(% style="width: 160px;" %)HSW985 ~~ 988|(% style="width:282px" %)7^^th^^ period key (Static mode)|(% style="width:452px" %)Character Input/ Display (length: 8)
400 |=(% style="width: 160px;" %)HSW989 ~~ 993|(% style="width:282px" %)7^^th ^^expiry time (Static mode)|(% style="width:452px" %)Numeric Input/ Display (YYYYMMDDHHMM)
401 |=(% style="width: 160px;" %)HSW995 ~~ 998|(% style="width:282px" %)8^^th^^ period key (Static mode)|(% style="width:452px" %)Character Input/ Display (length: 8)
402 |=(% style="width: 160px;" %)HSW999 ~~ 1003|(% style="width:282px" %)8^^th ^^expiry time (Static mode)|(% style="width:452px" %)Numeric Input/ Display (YYYYMMDDHHMM)
403 |=(% style="width: 160px;" %)HSW1005 ~~1008|(% style="width:282px" %)9^^th^^ period key (Static mode)|(% style="width:452px" %)Character Input/ Display (length: 8)
404 |=(% style="width: 160px;" %)HSW1009 ~~ 1013|(% style="width:282px" %)9^^th ^^expiry time (Static mode)|(% style="width:452px" %)Numeric Input/ Display (YYYYMMDDHHMM)
405 |=(% style="width: 160px;" %)HSW1015 ~~1018|(% style="width:282px" %)10^^th^^ period key (Static mode)|(% style="width:452px" %)Character Input/ Display (length: 8)
406 |=(% style="width: 160px;" %)HSW1019 ~~ 1023|(% style="width:282px" %)10^^th ^^expiry time (Static mode)|(% style="width:452px" %)Numeric Input/ Display (YYYYMMDDHHMM)
407 |=(% style="width: 160px;" %)HSW1025 ~~1028|(% style="width:282px" %)11^^th^^ period key (Static mode)|(% style="width:452px" %)Character Input/ Display (length: 8)
408 |=(% style="width: 160px;" %)HSW1029 ~~ 1033|(% style="width:282px" %)11^^th ^^expiry time (Static mode)|(% style="width:452px" %)Numeric Input/ Display (YYYYMMDDHHMM)
409 |=(% style="width: 160px;" %)HSW1035 ~~1038|(% style="width:282px" %)12^^th^^ period key (Static mode)|(% style="width:452px" %)Character Input/ Display (length: 8)
410 |=(% style="width: 160px;" %)HSW1039 ~~ 1043|(% style="width:282px" %)12^^th ^^expiry time (Static mode)|(% style="width:452px" %)Numeric Input/ Display (YYYYMMDDHHMM)
411 |=(% style="width: 160px;" %)HSW1046|(% style="width:282px" %)Current period (Static mode)|(% style="width:452px" %)Current period (Range 1-13)
412 |=(% style="width: 160px;" %)HSW1047|(% style="width:282px" %)Save settings (Static mode)|(% style="width:452px" %)(((
413 * HSX1047.0=1: Save static installment information
414 * HSX1047.1=1: Write installment information to registers
415 )))
416 |=(% style="width: 160px;" %)HSW1050~~HSW1065|(% style="width:282px" %)The recipe name that can input csv format|(% style="width:452px" %)Input CSV format recipe file name through "Character Input/ Display".(This function should be used in combination with the recipefunction)
417 |=(% style="width: 160px;" %)HSW1066|(% style="width:282px" %)Configure the type of the CSV file imported|(% style="width:452px" %)(((
418 The CSV file type imported (This function should be used in combination with the recipe function)
419
420 * =0: Import customed CSV file. The data in the file is valid.
421 * =1: Import ordinary recipe files of regular series HMI. The 1st row of the file is invalid.
422 * =2: Import special recipe files of regular series HMI. The 1st and 3nd rows and the 1st colume of the file is invalid.
423 )))
424 |=(% style="width: 160px;" %)HSW1067|(% style="width:282px" %)Location where the CSV file is saved|(% style="width:452px" %)(((
425 Set the path of CSV file (This function should be used in combination with the recipe function)
426
427 * =0: In the CsvFile directory of the USB stick
428 * =1: In the CsvFile directory of the SD card
429 )))
430 |=(% style="width: 160px;" %)HSW1070|(% style="width:282px" %)The time interval (seconds) since the last time the screen was clicked|(% style="width:452px" %)(((
431 Shows how long the current screen has not been clicked, using a decimal unsigned double word (Numeric Input/ Display).
432
433 **✎Note: **This register is cleared to zero regardless of which user clicks on the screen.
434 )))
435 |=(% style="width: 160px;" %)HSW1073|(% style="width:282px" %)Corresponding key value from keyboard|(% style="width:452px" %)Display the key value of the currently pressed key, the key value is shown in Table 1 (not updated when the character input display is being input)
436 |=(% style="width: 160px;" %)HSW1074|(% style="width:282px" %)Keyboard key status|(% style="width:452px" %)Display the current button status (not updated when the numeric input display is being input)(((
437 * =0: key release
438 * =1: key press
439 * =2: Long press the button
440 )))
441 |=(% style="width: 160px;" %)HSW1075|(% style="width:282px" %)Cursor speed|(% style="width:452px" %)Control the cursor movement speed, the range is 0～100, the default is 20
442 |=(% style="width: 160px;" %)HSW1076|(% style="width:282px" %)Cursor x coordinate value|(% style="width:452px" %)Record the x value at the current position of the cursor, range: 0 to screen width -1
443 |=(% style="width: 160px;" %)HSW1077|(% style="width:282px" %)Cursor y coordinate value|(% style="width:452px" %)Record the y value at the current position of the cursor, range: 0 to screen height-1
444 |=(% style="width: 160px;" %)HSW1078|(% style="width:282px" %)Corresponding ASCII code for keyboard keys|(% style="width:452px" %)Only the ASCII value of letters, numbers, and symbols are displayed, and the ASCII value of the function button is not displayed.
445 |=(% style="width: 160px;" %)HSW1079|(% style="width:282px" %)Trigger to set the cursor position and set the Enter key mode|(% style="width:452px" %)(((
446 * HSX1079.0=1: Set the cursor position according to the cursor xy register value;
447 * HSX1079.1=0: When the numeric/character input display is being input, press Enter to end the input, no value/text part is being input, Enter is a normal click;
448 * HSX1079.1=1 Regardless of whether the numeric/character component is inputting the Enter key, only normal click is performed, and the keyboard end input is not performed.
449 )))
450 |=(% style="width: 160px;" %)HSW1083|(% style="width:282px" %)Naming method for printing object screenshots|(% style="width:452px" %)(((
451 Example: The time is 2019-01-04 14:29:10 (523 milliseconds), the screen number is 0, and the object ID is 2.
452
453 * =0: Use year, month, day, hour, minute, second, millisecond, screen number, part number to name, such as: 2019010414291052302.bmp.
454 * =1: Name using year, month, day, hour, minute, and second.
455
456 For example: 20190104142910.bmp.
457 )))
458 |=(% style="width: 160px;" %)HSW1086|(% style="width:282px" %)Control address mapping polling cycle, unit: ms|(% style="width:452px" %)(((
459 Address mapping polling cycle, effective range: 40~~1000ms, default: 300ms.
460
461 * When the set value is greater than 1000, the value is 1000.
462 * When the set value is lower than 40, it changes to the default value 300
463 )))
464 |=(% style="width: 160px;" %)HSW1087|(% style="width:282px" %)Control write interval in address mapping|(% style="width:452px" %)(((
465 After reading data to the device for N times, Perform an address mapping write operation. N is the interval value. The effective range: 0~~5, and default is 2.
466
467 When N more than 5, it is 5.
468
469 0 is the fastest and 5 is the slowest.
470 )))
471 |=(% style="width: 160px;" %)HSW1088|(% style="width:282px" %)Control the write interval of script|(% style="width:452px" %)(((
472 After reading data to the device for N times, Perform a script write operation. N is the interval value. The effective range: 0~~5, and default is 2.
473
474 When N more than 5, it is 5.
475
476 0 is the fastest and 5 is the slowest.
477 )))
478 |=(% style="width: 160px;" %)HSW1089|(% style="width:282px" %)Control interval of read through|(% style="width:452px" %)(((
479 After reading data to the device for N times, Perform a read through operation. N is the interval value. The effective range: 0~~5, and default is 2.
480
481 When N more than 5, it is 5.
482
483 0 is the fastest and 5 is the slowest.
484 )))
485 |=(% style="width: 160px;" %)HSW1100|(% colspan="1" rowspan="4" style="width:282px" %)Set the Master IP for Multi-link|(% style="width:452px" %)High word 1 for Master IP address of multi-link
486 |=(% style="width: 160px;" %)HSW1101|(% style="width:452px" %)High word 2 for Master IP address of multi-link
487 |=(% style="width: 160px;" %)HSW1102|(% style="width:452px" %)High word 3 for Master IP address of multi-link
488 |=(% style="width: 160px;" %)HSW1103|(% style="width:452px" %)High word 4 for Master IP address of multi-link
489 |=(% style="width: 160px;" %)HSW1104|(% style="width:282px" %)Control connection to Master or not for Multi-link slave device|(% style="width:452px" %)(((
490 * =1: Connect to the Master
491 * =0: Do not connect to Master
492 )))
493 |=(% style="width: 160px;" %)HSW1141|(% style="width:282px" %)Release alarm|(% style="width:452px" %)(((
494 * =0, Default value
495 * =1, Release the alarm generated before the last power-down when starting up
496 )))
497 |=(% style="width: 160px;" %)HSW1200|(% colspan="1" rowspan="2" style="width:282px" %)TSAP settings for HMI in the Siemens LOGO! 8 protocol(ig series or HMI V2.0)|(% style="width:452px" %)HMI local TSAP, which corresponds to the remote TSAP of PLC
498 |=(% style="width: 160px;" %)HSW1201|(% style="width:452px" %)HMI remote TSAP, which corresponds to the local TSAP of PLC
499 |=(% style="width: 160px;" %)HSW1450|(% style="width:282px" %)Enable objects level password function|(% style="width:452px" %)(((
500 * =0, Disable
501 * =1, Enable
502 )))
503 |=(% style="width: 160px;" %)HSW1451|(% style="width:282px" %)Whether the object level passwords are independent of each other|(% style="width:452px" %)(((
504 * =0, No, high-level passwords can unlock low-level
505 * = 1, Yes, high-level passwords cannot unlock low-level
506 )))
507 |=(% style="width: 160px;" %)HSW1452|(% style="width:282px" %)Initialization level|(% style="width:452px" %)Initialization level while HMI running
508 |=(% style="width: 160px;" %)HSW1454~~1457|(% style="width:282px" %)Password for Level 1|(% style="width:452px" %)(((
509 Display password for level 1, using character input object, up to 8 characters (numbers, letters (case sensitive))
510 )))
511 |=(% style="width: 160px;" %)HSW1458~~1461|(% style="width:282px" %)Password for Level 2|(% style="width:452px" %)Display password for level 2, using character input object, up to 8 characters (numbers, letters (case sensitive))
512 |=(% style="width: 160px;" %)HSW1462~~1465|(% style="width:282px" %)Password for Level 3|(% style="width:452px" %)Display password for level 3, using character input object, up to 8 characters (numbers, letters (case sensitive))
513 |=(% style="width: 160px;" %)HSW1466~~1469|(% style="width:282px" %)Password for Level 4|(% style="width:452px" %)Display password for level 4, using character input object, up to 8 characters (numbers, letters (case sensitive))
514 |=(% style="width: 160px;" %)HSW1470~~1473|(% style="width:282px" %)Password for Level 5|(% style="width:452px" %)Display password for level 5, using character input object, up to 8 characters (numbers, letters (case sensitive))
515 |=(% style="width: 160px;" %)HSW1474~~1477|(% style="width:282px" %)Password for Level 6|(% style="width:452px" %)Display password for level 6, using character input object, up to 8 characters (numbers, letters (case sensitive))
516 |=(% style="width: 160px;" %)HSW1478~~1481|(% style="width:282px" %)Password for Level 7|(% style="width:452px" %)Display password for level 7, using character input object, up to 8 characters (numbers, letters (case sensitive))
517 |=(% style="width: 160px;" %)HSW1482~~1485|(% style="width:282px" %)Password for Level 8|(% style="width:452px" %)Display password for level 8, using character input object, up to 8 characters (numbers, letters (case sensitive))
518 |=(% style="width: 160px;" %)HSW1486~~1489|(% style="width:282px" %)Password for Level 9|(% style="width:452px" %)Display password for level 9, using character input object, up to 8 characters (numbers, letters (case sensitive))
519 |=(% style="width: 160px;" %)HSW1490~~1493|(% style="width:282px" %)Password for Level 10|(% style="width:452px" %)Display password for level 10, using character input object, up to 8 characters (numbers, letters (case sensitive))
520 |=(% style="width: 160px;" %)HSW1494~~1497|(% style="width:282px" %)Password for Level 11|(% style="width:452px" %)Display password for level 11, using character input object, up to 8 characters (numbers, letters (case sensitive))
521 |=(% style="width: 160px;" %)HSW1498~~1501|(% style="width:282px" %)Password for Level 12|(% style="width:452px" %)Display password for level 12, using character input object, up to 8 characters (numbers, letters (case sensitive))
522 |=(% style="width: 160px;" %)HSW1502|(% style="width:282px" %)Modify password for object level|(% style="width:452px" %)(((
523 * HSX1502.0=1: Modification comfirmed. Save the data of HSW1450~~HSW1501 to a file for immediate effect.
524 * HSX1502.1=1:Modification cancelled. Restore the current data of hSW1450-HSW1501 to the data saved in the file last time.
525 )))
526 |=(% style="width: 160px;" %)HSW1509|(% style="width:282px" %)Curve width|(% style="width:452px" %)(((
527 * =0: Use the curve width set by project default.
528 * =1 to 10: use special register to set curve width.
529 )))
530 |=(% style="width: 160px;" %)HSW1603|(% style="width:282px" %)Number of current unreleased alarms|(% style="width:452px" %)The number of current unreleased alarms in alarm record file.
531 |=(% style="width: 160px;" %)HSW1604|(% style="width:282px" %)The auxiliary judgment address when the control bit in the Object Lock fails to be read|(% style="width:452px" %)(((
532 * =0: The auxiliary address is invalid.
533 * =1: When the communication fails, lock the object.
534 * =2: When the communication fails, unlock the object.
535 * =Others: The auxiliary address is invalid.
536 )))
537 |=(% style="width: 160px;" %)HSW1605|(% style="width:282px" %)BCD format natural decimal control|(% style="width:452px" %)(((
538 Whether to display natural decimals with decimal point in BCD format:
539
540 * 0=Not enabled.
541 * 1=Enable.
542
543 (For example, 56.20 is displayed as 56.2, 33.00 is displayed as 33)
544 )))
545 |=(% style="width: 160px;" %)HSW1606|(% style="width:282px" %)User permission modification control|(% style="width:452px" %)(((
546 * =0: Ordinary users are allowed to modify permissions and other operations
547 * =1: Only the administrator can operate (default is 0)
548 )))
549 |=(% style="width: 160px;" %)HSW1607|(% style="width:282px" %)The spacing value among the drop-down items of the drop-down list|(% style="width:452px" %)10 to 50 is effective, such as: 23 is 2.3 times the height of the object.
550 |=(% style="width: 160px;" %)HSW1611|(% style="width:282px" %)(((
551 Traditional recipe transfer
552 )))|(% style="width:452px" %)(((
553 * =1: download traditional recipe.
554 * =2: upload the traditional recipe.
555 )))
556 |=(% style="width: 160px;" %)HSW1612|(% style="width:282px" %)Traditional Recipe group number|(% style="width:452px" %)Traditional Recipe group number
557 |=(% style="width: 160px;" %)HSW1613|(% style="width:282px" %)Display the status of network card|(% style="width:452px" %)(((
558 * =1: Normal
559 * =Others: Abnormal
560 )))
561 |=(% style="width: 160px;" %)HSW1614~~1623|(% style="width:282px" %)Download speed per second|(% style="width:452px" %)Display the download speed per second. (The value is string)
562 |=(% style="width: 160px;" %)HSW1624~~1633|(% style="width:282px" %)Upnload speed per second|(% style="width:452px" %)Display the upload speed per second. (The value is string)
563 |=(% style="width: 160px;" %)HSW1634~~1643|(% style="width:282px" %)Flow consumption rate|(% style="width:452px" %)Display the total flow rate per second (The value is string)
564 |=(% style="width: 160px;" %)HSW1644~~1653|(% style="width:282px" %)Download flow consumption after power on|(% style="width:452px" %)Display the download flow consumption after power on (The value is string)
565 |=(% style="width: 160px;" %)HSW1654~~1663|(% style="width:282px" %)Upload flow consumption after power on|(% style="width:452px" %)Display the upload flow consumption after power on (The value is string)
566 |=(% style="width: 160px;" %)HSW1664~~1673|(% style="width:282px" %)Total flow consumption after power on|(% style="width:452px" %)Display the total flow consumption after power on (download and upload). (The value is string)
567 |=(% style="width: 160px;" %)HSW1674~~1683|(% style="width:282px" %)Historical flow consumption|(% style="width:452px" %)Display historical flow consumption (download and upload). (The value is string)
568 |=(% style="width: 160px;" %)HSW1684~~1693|(% style="width:282px" %)Flow consumption in 10 minutes|(% style="width:452px" %)Flow consumption in 10 minutes (download and upload). (The value is string)
569 |=(% style="width: 160px;" %)HSW1694~~1703|(% style="width:282px" %)Flow consumption in 30 minutes|(% style="width:452px" %)Flow consumption in 30 minutes (download and upload). (The value is string)
570 |=(% style="width: 160px;" %)HSW1704~~1713|(% style="width:282px" %)Flow consumption in 3 hours|(% style="width:452px" %)Flow consumption in 3 hours (download and upload). (The value is string)
571 |=(% style="width: 160px;" %)HSW1715|(% style="width:282px" %)Reset flow|(% style="width:452px" %)(((
572 * =1: Clear historical flow data and restart the count.
573 * =Others: Invalid
574 )))
575 |=(% style="width: 160px;" %)HSW1719|(% style="width:282px" %)Network status of Ethernet connnecting to server|(% style="width:452px" %)(((
576 * =0: Server connection exception
577 * =1: Server connection is OK
578 )))
579 |=(% style="width: 160px;" %)HSW1720|(% colspan="1" rowspan="12" style="width:282px" %)Related IP register in WIFI network status (It is valid when HMI is connected to WIFI)|(% style="width:452px" %)Local IP address high byte 1
580 |=(% style="width: 160px;" %)HSW1721|(% style="width:452px" %)Local IP address high byte 2
581 |=(% style="width: 160px;" %)HSW1722|(% style="width:452px" %)Local IP address high byte 3
582 |=(% style="width: 160px;" %)HSW1723|(% style="width:452px" %)Local IP address high byte 4
583 |=(% style="width: 160px;" %)HSW1724|(% style="width:452px" %)Local mask IP address high byte 1
584 |=(% style="width: 160px;" %)HSW1725|(% style="width:452px" %)Local mask IP address high byte 2
585 |=(% style="width: 160px;" %)HSW1726|(% style="width:452px" %)Local mask IP address high byte 3
586 |=(% style="width: 160px;" %)HSW1727|(% style="width:452px" %)Local mask IP address high byte 4
587 |=(% style="width: 160px;" %)HSW1728|(% style="width:452px" %)Local gateway IP address high byte 1
588 |=(% style="width: 160px;" %)HSW1729|(% style="width:452px" %)Local gateway IP address high byte 2
589 |=(% style="width: 160px;" %)HSW1730|(% style="width:452px" %)Local gateway IP address high byte 3
590 |=(% style="width: 160px;" %)HSW1731|(% style="width:452px" %)Local gateway IP address high byte 4
591 |=(% style="width: 160px;" %)HSW1733|(% colspan="1" rowspan="6" style="width:282px" %)(((
592 Display the MAC code of current WIFI
593
594 (display in hexadecimal)
595 )))|(% style="width:452px" %)Local MAC address high byte 1 (hexadecimal)
596 |=(% style="width: 160px;" %)HSW1734|(% style="width:452px" %)Local MAC address high byte 2 (hexadecimal)
597 |=(% style="width: 160px;" %)HSW1735|(% style="width:452px" %)Local MAC address high byte 3 (hexadecimal)
598 |=(% style="width: 160px;" %)HSW1736|(% style="width:452px" %)Local MAC address high byte 4 (hexadecimal)
599 |=(% style="width: 160px;" %)HSW1737|(% style="width:452px" %)Local MAC address high byte 5 (hexadecimal)
600 |=(% style="width: 160px;" %)HSW1738|(% style="width:452px" %)Local MAC address high byte 6 (hexadecimal)
601 |=(% style="width: 160px;" %)HSW1739|(% style="width:282px" %)Display the network status of WIFI|(% style="width:452px" %)(((
602 * =0: Server connection exception
603 * =1: Server connection is OK
604 )))
605 |=(% style="width: 160px;" %)HSW1740|(% style="width:282px" %)Wi-fi signal strength|(% style="width:452px" %)(((
606 Display the value of Wi-fi signal signal strength, ranges from 0~~100 (Signal strength is automatically obtained only once when HMI is powered on, and it will not be automatically updated. It needs to be used with the HSW1890)
607 )))
608 |=(% style="width: 160px;" %)HSW1741|(% colspan="1" rowspan="12" style="width:282px" %)Related IP register in 4Gnetwork status (It is valid when HMI is connected to 4G)|(% style="width:452px" %)Local IP address high byte 1
609 |=(% style="width: 160px;" %)HSW1742|(% style="width:452px" %)Local IP address high byte 2
610 |=(% style="width: 160px;" %)HSW1743|(% style="width:452px" %)Local IP address high byte 3
611 |=(% style="width: 160px;" %)HSW1744|(% style="width:452px" %)Local IP address high byte 4
612 |=(% style="width: 160px;" %)HSW1745|(% style="width:452px" %)Local mask IP address high byte 1
613 |=(% style="width: 160px;" %)HSW1746|(% style="width:452px" %)Local mask IP address high byte 2
614 |=(% style="width: 160px;" %)HSW1747|(% style="width:452px" %)Local mask IP address high byte 3
615 |=(% style="width: 160px;" %)HSW1748|(% style="width:452px" %)Local mask IP address high byte 4
616 |=(% style="width: 160px;" %)HSW1749|(% style="width:452px" %)Local gateway IP address high byte 1
617 |=(% style="width: 160px;" %)HSW1750|(% style="width:452px" %)Local gateway IP address high byte 2
618 |=(% style="width: 160px;" %)HSW1751|(% style="width:452px" %)Local gateway IP address high byte 3
619 |=(% style="width: 160px;" %)HSW1752|(% style="width:452px" %)Local gateway IP address high byte 4
620 |=(% style="width: 160px;" %)HSW1754|(% colspan="1" rowspan="6" style="width:282px" %)(((
621 Display the MAC code of current WIFI
622
623 (display in hexadecimal)
624 )))|(% style="width:452px" %)Local MAC address high byte 1 (hexadecimal)
625 |=(% style="width: 160px;" %)HSW1755|(% style="width:452px" %)Local MAC address high byte 2 (hexadecimal)
626 |=(% style="width: 160px;" %)HSW1756|(% style="width:452px" %)Local MAC address high byte 3 (hexadecimal)
627 |=(% style="width: 160px;" %)HSW1757|(% style="width:452px" %)Local MAC address high byte 4 (hexadecimal)
628 |=(% style="width: 160px;" %)HSW1758|(% style="width:452px" %)Local MAC address high byte 5 (hexadecimal)
629 |=(% style="width: 160px;" %)HSW1759|(% style="width:452px" %)Local MAC address high byte 6 (hexadecimal)
630 |=(% style="width: 160px;" %)HSW1760|(% style="width:282px" %)Display 4G network status|(% style="width:452px" %)(((
631 * =0: Server connection exception
632 * =1: Server connection is OK
633 )))
634 |=(% style="width: 160px;" %)HSW1761|(% style="width:282px" %)Display 4G network signal strength|(% style="width:452px" %)Signal strength: 0~~31. The greater the value ,the signal is stronger
635 |=(% style="width: 160px;" %)(((
636 HSW1762
637 )))|(% colspan="1" rowspan="13" style="width:282px" %)(((
638 Note: Valid when Ethernet2 of HMI is plugged into the network cable.
639 ①、When the Ethernet setting is enabled in the project parameters, this register displays the set value.
640 ②. When the Ethernet setting is not enabled in the engineering parameters, the register displays the Ethernet IP automatically acquired by the HMI.
641 ③. When the HMI is not plugged into the network cable, the register will show 0 whether the engineering parameters are set or not.
642 ④.IP related registers can be read and written (only static IP mode can be written).
643 )))|(% style="width:452px" %)(((
644 Ethernet2 Local IP address high byte 1
645 )))
646 |=(% style="width: 160px;" %)(((
647 HSW1763
648 )))|(% style="width:452px" %)(((
649 Ethernet2 Local IP address high byte 2
650 )))
651 |=(% style="width: 160px;" %)(((
652 HSW1764
653 )))|(% style="width:452px" %)(((
654 Ethernet2 Local IP address high byte 3
655 )))
656 |=(% style="width: 160px;" %)(((
657 HSW1765
658 )))|(% style="width:452px" %)(((
659 Ethernet2 Local IP address high byte 4
660 )))
661 |=(% style="width: 160px;" %)(((
662 HSW1766
663 )))|(% style="width:452px" %)(((
664 Ethernet2 Local mask IP address high byte 1
665 )))
666 |=(% style="width: 160px;" %)(((
667 HSW1767
668 )))|(% style="width:452px" %)(((
669 Ethernet2 Local mask IP address high byte 2
670 )))
671 |=(% style="width: 160px;" %)(((
672 HSW1768
673 )))|(% style="width:452px" %)Ethernet2 Local mask IP address high byte 3
674 |=(% style="width: 160px;" %)HSW1769|(% style="width:452px" %)Ethernet2 Local mask IP address high byte 4
675 |=(% style="width: 160px;" %)(((
676 HSW1770
677 )))|(% style="width:452px" %)(((
678 Ethernet2 Local gateway IP address high byte 1
679 )))
680 |=(% style="width: 160px;" %)(((
681 HSW1771
682 )))|(% style="width:452px" %)(((
683 Ethernet2 Local gateway IP address high byte 2
684 )))
685 |=(% style="width: 160px;" %)(((
686 HSW1772
687 )))|(% style="width:452px" %)(((
688 Ethernet2 Local gateway IP address high byte 3
689 )))
690 |=(% style="width: 160px;" %)(((
691 HSW1773
692 )))|(% style="width:452px" %)(((
693 Ethernet2 Local gateway IP address high byte 4
694 )))
695 |=(% style="width: 160px;" %)(((
696 HSW1774
697 )))|(% style="width:452px" %)(((
698 Ethernet2 Local Port Address
699 )))
700 |=(% style="width: 160px;" %)(((
701 HSW1775
702 )))|(% colspan="1" rowspan="6" style="width:282px" %)(((
703 ①Display the MAC code of Ethernet2 NIC
704
705 (hexadecimal display)
706
707 ②Read-only mode, not modifiable
708 )))|(% style="width:452px" %)(((
709 Ethernet2 Local MAC code high byte 1
710 )))
711 |=(% style="width: 160px;" %)(((
712 HSW1776
713 )))|(% style="width:452px" %)(((
714 Ethernet2 Local MAC code high byte 2
715 )))
716 |=(% style="width: 160px;" %)(((
717 HSW1777
718 )))|(% style="width:452px" %)(((
719 Ethernet2 Local MAC code high byte 3
720 )))
721 |=(% style="width: 160px;" %)(((
722 HSW1778
723 )))|(% style="width:452px" %)(((
724 Ethernet2 Local MAC code high byte 4
725 )))
726 |=(% style="width: 160px;" %)(((
727 HSW1779
728 )))|(% style="width:452px" %)(((
729 Ethernet2 Local MAC code high byte 5
730 )))
731 |=(% style="width: 160px;" %)(((
732 HSW1780
733 )))|(% style="width:452px" %)(((
734 Ethernet2 Local MAC code high byte 6
735 )))
736 |=(% style="width: 160px;" %)(((
737 HSW1781
738 )))|(% colspan="1" rowspan="8" style="width:282px" %)(((
739 ①Display and modify DNS1 and DNS2 of Ethernet2
740
741 ②Related registers can be read and written mode (only static IP mode can be written)
742 )))|(% style="width:452px" %)(((
743 Ethernet2 Local DNS1 address high byte 1
744 )))
745 |=(% style="width: 160px;" %)(((
746 HSW1782
747 )))|(% style="width:452px" %)(((
748 Ethernet2 Local DNS1 address high byte 2
749 )))
750 |=(% style="width: 160px;" %)(((
751 HSW1783
752 )))|(% style="width:452px" %)(((
753 Ethernet2 Local DNS1 address high byte 3
754 )))
755 |=(% style="width: 160px;" %)(((
756 HSW1784
757 )))|(% style="width:452px" %)(((
758 Ethernet2 Local DNS1 address high byte 4
759 )))
760 |=(% style="width: 160px;" %)(((
761 HSW1785
762 )))|(% style="width:452px" %)(((
763 Ethernet2 Local DNS2 address high byte 1
764 )))
765 |=(% style="width: 160px;" %)(((
766 HSW1786
767 )))|(% style="width:452px" %)(((
768 Ethernet2 Local DNS2 address high byte 2
769 )))
770 |=(% style="width: 160px;" %)(((
771 HSW1787
772 )))|(% style="width:452px" %)(((
773 Ethernet2 Local DNS2 address high byte 3
774 )))
775 |=(% style="width: 160px;" %)(((
776 HSW1788
777 )))|(% style="width:452px" %)(((
778 Ethernet2 Local DNS2 address high byte 4
779 )))
780 |=(% style="width: 160px;" %)(((
781 HSW1789
782 )))|(% colspan="1" style="width:282px" %)(((
783 Display or set the dynamic or static IP mode of Ethernet2
784 )))|(% style="width:452px" %)(((
785 HSX1789.0 = 0, Static IP mode
786
787 HSX1789.0 = 1, dynamic IP mode
788 )))
789 |=(% style="width: 160px;" %)(((
790 HSW1790
791 )))|(% colspan="1" style="width:282px" %)(((
792 Confirm Ethernet2 IP, subnet mask, gateway, DNS1, DNS2, and dynamic static IP settings
793 )))|(% style="width:452px" %)(((
794 ~= 1, confirm the setting (i.e., after modifying IP-related information, set this address to 1, representing confirmation of the modification, after which it will be reset to 0)
795 )))
796 |=(% style="width: 160px;" %)(((
797 HSW1791
798 )))|(% colspan="1" style="width:282px" %)(((
799 Network status of the Ethernet2 connection server
800 )))|(% style="width:452px" %)(((
801 ~= 0, connection to the server is abnormal = 1, connection to the server is normal
802 )))
803 |=(% style="width: 160px;" %)HSW1852|(% style="width:282px" %)Control the interval in two consecutive clicks|(% style="width:452px" %)Limit range: 1~~500ms. The default is 100 ms.
804 |=(% style="width: 160px;" %)HSW1853|(% style="width:282px" %)File format for exporting data records to USB flash drive or SD card|(% style="width:452px" %)(((
805 * =0: db database
806 * =1: CSV
807
808 (Only valid for script function DbToCsvFile)
809 )))
810 |=(% style="width: 160px;" %)HSW1854|(% style="width:282px" %)High and low word conversion type|(% style="width:452px" %)(((
811 * =0: use the old high-low word conversion (default)
812 * =1: usie the new high-low word conversion
813 )))
814 |=(% style="width: 160px;" %)HSW1855|(% style="width:282px" %)Screen Lock prompt display control|(% style="width:452px" %)(((
815 Control whether the screen lock prompt is displayed,
816
817 * =0: display(default value)
818 * =Other: no display.
819 )))
820 |=(% style="width: 160px;" %)HSW1856|(% style="width:282px" %)Display map fence drawing status|(% style="width:452px" %)(((
821 * =0: no map fence
822 * =1: The map fence is drawn and the device is inside the fence
823 * =2: The map fence is drawn and the device is outside the fence
824 )))
825 |=(% style="width: 160px;" %)HSW1857|(% style="width:282px" %)USB disk download |(% style="width:452px" %)(((
826 * =0: download project
827 * =1: download firmware
828 * =2: enter the background
829 )))
830 |=(% style="width: 160px;" %)HSW1865|(% style="width:282px" %)Priority connection to the cloud|(% style="width:452px" %)(((
831 * =0: priority Ethernet
832 * =1: priority WLAN
833 * =2: priority 4G
834 )))
835 |=(% style="width: 160px;" %)HSW1866|(% style="width:282px" %)Delete the Lua extension module file|(% style="width:452px" %)(((
836 * =0: delete;
837 * = Others: do not delete
838 )))
839 |=(% style="width: 160px;" %)HSW1867|(% style="width:282px" %)Reset mode|(% style="width:452px" %)(((
840 Monitor address is set during reset of reset switch, whether to cancel reset,
841
842 * = 0: yes (default);
843 * = 1: no
844 )))
845 |=(% style="width: 160px;" %)HSW1868|(% style="width:282px" %)Double-click or long press the record type table mode|(% style="width:452px" %)(((
846 Controls whether the button pops up when double-clicking or long pressing on record type table object
847
848 * = 0: yes (default);
849 * = 1: no
850 )))
851 |=(% style="width: 160px;" %)(((
852 HSW1869
853 )))|(% style="width:282px" %)(((
854 Dynamic screensaver countdown
855 )))|(% style="width:452px" %)(((
856 Countdown to enter dynamic screensaver effect, unit (S)
857 )))
858 |=(% style="width: 160px;" %)(((
859 HSW1870
860 )))|(% style="width:282px" %)(((
861 Display or set the dynamic or static IP mode of Ethernet1
862 )))|(% style="width:452px" %)(((
863 HSX1870.0 = 0, Static IP mode
864
865 HSX1870.0 = 1, dynamic IP mode
866 )))
867 |=(% style="width: 160px;" %)(((
868 HSW1871
869 )))|(% style="width:282px" %)(((
870 Confirm the IP, subnet mask, gateway, DNS1, DNS2, and dynamic static IP settings for Ethernet1
871 )))|(% style="width:452px" %)(((
872 ~= 1, confirm the setting (i.e., after modifying IP-related information, set this address to 1, representing confirmation of the modification, after which it will be reset to 0)
873 )))
874 |=(% style="width: 160px;" %)(((
875 HSW1872
876 )))|(% colspan="1" rowspan="8" style="width:282px" %)(((
877 ①Display and modify DNS1 and DNS2 of Ethernet1
878
879 ②Related registers can be read and written mode (only static IP mode can be written)
880 )))|(% style="width:452px" %)(((
881 Ethernet1 Local DNS1 address high byte 1
882 )))
883 |=(% style="width: 160px;" %)(((
884 HSW1873
885 )))|(% style="width:452px" %)Ethernet1 Local DNS1 address high byte 2
886 |=(% style="width: 160px;" %)(((
887 HSW1874
888 )))|(% style="width:452px" %)Ethernet1 Local DNS1 address high byte 3
889 |=(% style="width: 160px;" %)(((
890 HSW1875
891 )))|(% style="width:452px" %)Ethernet1 Local DNS1 address high byte 4
892 |=(% style="width: 160px;" %)(((
893 HSW1876
894 )))|(% style="width:452px" %)Ethernet1 Local DNS2 address high byte 1
895 |=(% style="width: 160px;" %)(((
896 HSW1877
897 )))|(% style="width:452px" %)Ethernet1 Local DNS2 address high byte 2
898 |=(% style="width: 160px;" %)(((
899 HSW1878
900 )))|(% style="width:452px" %)Ethernet1 Local DNS2 address high byte 3
901 |=(% style="width: 160px;" %)(((
902 HSW1879
903 )))|(% style="width:452px" %)Ethernet1 Local DNS2 address high byte 4
904 |=(% style="width: 160px;" %)HSW1890|(% colspan="1" style="width:282px" %)Enable refresh current network signal|(% style="width:452px" %)(((
905 * =1: Refresh the network signal once after triggered (This register will be automatically reset after triggered, only update the signal value once after per 15 seconds, not able to update twice in the short interval)
906 * =Others: not refresh
907 )))
908 |=(% style="width: 160px;" %)HSW1891|(% colspan="1" style="width:282px" %)Enable clear cache for screen data  |(% style="width:452px" %)(((
909 * =1, not clear screen cache when switch language
910 * =2, trigger clear cache of all screens for once time
911 * =3, always clear cache of all screen data
912 )))
913 |=(% style="width: 160px;" %)HSW10000~~19999|(% style="width:282px" %)Power-down storage area|(% style="width:452px" %)After restart, the data remains
914 |=(% style="width: 160px;" %)HSW10035|(% rowspan="13" style="width:282px" %)(((
915 Note: Valid when Ethernet1 of HMI is plugged into the network cable.
916 ① When the Ethernet setting is enabled in the project parameters, this register displays the set value.
917 ② When the Ethernet setting is not enabled in the engineering parameters, the register displays the Ethernet IP automatically acquired by the HMI.
918 ③ When the HMI is not plugged into the network cable, the register will show 0 whether the engineering parameters are set or not.
919 ④ IP related registers can be read and written (only static IP mode can be written).
920 )))|(% style="width:452px" %)Local IP address high byte 1
921 |=(% style="width: 160px;" %)HSW10036|(% style="width:452px" %)Local IP address high byte 2
922 |=(% style="width: 160px;" %)HSW10037|(% style="width:452px" %)Local IP address high byte 3
923 |=(% style="width: 160px;" %)HSW10038|(% style="width:452px" %)Local IP address high byte 4
924 |=(% style="width: 160px;" %)HSW10039|(% style="width:452px" %)Local mask IP address high byte 1
925 |=(% style="width: 160px;" %)HSW10040|(% style="width:452px" %)Local mask IP address high byte 2
926 |=(% style="width: 160px;" %)HSW10041|(% style="width:452px" %)Local mask IP address high byte 3
927 |=(% style="width: 160px;" %)HSW10042|(% style="width:452px" %)Local mask IP address high byte 4
928 |=(% style="width: 160px;" %)HSW10043|(% style="width:452px" %)Local gateway address high byte 1
929 |=(% style="width: 160px;" %)HSW10044|(% style="width:452px" %)Local gateway address high byte 2
930 |=(% style="width: 160px;" %)HSW10045|(% style="width:452px" %)Local gateway address high byte 3
931 |=(% style="width: 160px;" %)HSW10046|(% style="width:452px" %)Local gateway address high byte 4
932 |=(% style="width: 160px;" %)HSW10047|(% style="width:452px" %)Local port address
933 |=(% style="width: 160px;" %)HSW10048|(% rowspan="6" style="width:282px" %)(((
934 ①Display the MAC code of Ethernet1 NIC
935
936 (hexadecimal display)
937
938 ②Read-only mode, not modifiable
939 )))|(% style="width:452px" %)Local MAC code high word 1
940 |=(% style="width: 160px;" %)HSW10049|(% style="width:452px" %)Local MAC code high word 2
941 |=(% style="width: 160px;" %)HSW10050|(% style="width:452px" %)Local MAC code high word 3
942 |=(% style="width: 160px;" %)HSW10051|(% style="width:452px" %)Local MAC code high word 4
943 |=(% style="width: 160px;" %)HSW10052|(% style="width:452px" %)Local MAC code high word 5
944 |=(% style="width: 160px;" %)HSW10053|(% style="width:452px" %)Local MAC code high word 6
945 |=(% style="width: 160px;" %)HSW10118|(% colspan="1" rowspan="2" style="width:282px" %)TSAP settings for HMI in the Siemens LOGO! 8 protocol|(% style="width:452px" %)HMI local TSAP, which corresponds to the remote TSAP of PLC
946 |=(% style="width: 160px;" %)HSW10119|(% style="width:452px" %)HMI remote TSAP, which corresponds to the local TSAP of PLC
947 |=(% style="width: 160px;" %)HSW10461~~10493|(% style="width:282px" %)Remote access password|(% style="width:452px" %)8-character remote access password
948 |=(% style="width: 160px;" %)HSW10494~~10558|(% style="width:282px" %)Machine ID (Read only)|(% style="width:452px" %)Machine ID for remote access (read only 64-bit)
949 |=(% style="width: 160px;" %)HSW10576|(% style="width:282px" %)Save dynamic installment settings|(% style="width:452px" %)HSX10576.0=1: Save the set dynamic installment information
950 |=(% style="width: 160px;" %)HSW10577|(% style="width:282px" %)Control address for installment|(% style="width:452px" %)(((
951 * HSX10577.0=0: disable dynamic installment
952 * HSX10577.0=1: enable dynamic installment
953 * HSX10577.1=0: disable static installment
954 * HSX10577.1=1: enable static installment
955 )))
956 |=(% style="width: 160px;" %)HSW10578-10583|(% style="width:282px" %)Password for dynamic installment|(% style="width:452px" %)Character Input/ Display (length: 6)
957 |=(% style="width: 160px;" %)HSW10584-10586|(% style="width:282px" %)Expiry time of dynamic installment|(% style="width:452px" %)Expiry time: YYYYMMDD (Numeric Input/ Display)
958 |=(% style="width: 160px;" %)HSW10587-10589|(% style="width:282px" %)Last expiry time of dynamic installment|(% style="width:452px" %)Expiry time: YYYYMMDD (Numeric Input/ Display)
959 |=(% style="width: 160px;" %)HSW10590|(% style="width:282px" %)Background light time|(% style="width:452px" %)(((
960 Set the light time for background
961
962 * =0: The screen backlight is always on.
963 * =Others: The screen backlight is on for a period of time and then turns off. The length of time is controlled by the value of the register address. Unit: second.
964 )))
965 |=(% style="width: 160px;" %)HSW10591|(% style="width:282px" %)Backlight brightness adjustment|(% style="width:452px" %)Backlight brightness range: 1 (darkest) ~~ 100 (brightest)
966 |=(% style="width: 160px;" %)HSW10603|(% style="width:282px" %)Set the printer to print orientation|(% style="width:452px" %)(((
967 Set the print direction:
968
969 * =1: Forward printing
970 * =2: Reverse print
971 * =Other: Forward print
972 )))
973 |=(% style="width: 160px;" %)HSW10604|(% style="width:282px" %)Print dot type|(% style="width:452px" %)(((
974 * =1: new firmware 8 dot matrix type
975 * =2: new firmware 24 dot matrix type
976 * =3: old firmware 8 dot matrix type
977 * =4: old firmware 24 dot matrix type
978 * =Other: new firmware 8 dot matrix type
979 )))
980 |=(% style="width: 160px;" %)HSW10605|(% style="width:282px" %)Print width of printer|(% style="width:452px" %)Set the width of the printer to print (in pixels), such as HSW10605 = 394: The printer supports images with a print width of 394 pixels
981 |=(% style="width: 160px;" %)HSW10606|(% style="width:282px" %)Printer instruction type|(% style="width:452px" %)(((
982 * =1: Graphic print type
983 * =2: Dot density printing type
984 * =3: special for EPSON printer
985 )))
986 |=(% style="width: 160px;" %)HSW10607|(% style="width:282px" %)Printer paper cutting function|(% style="width:452px" %)(((
987 * =1: Enable
988 * =2: Disable
989 )))
990 |=(% style="width: 160px;" %)HSW10608|(% style="width:282px" %)Print the alignment of the text|(% style="width:452px" %)(((
991 * =1: Left alignment
992 * =2: Center alignment
993 * =3: Right alignment
994 )))
995 |=(% style="width: 160px;" %)HSW10610|(% style="width:282px" %)Set weconcloud server|(% style="width:452px" %)(((
996 * =0: Select the server configured in "Project Settings"
997 * =1: select Server 1
998 * =2: select Server 2
999 )))
1000 |=(% style="width: 160px;" %)HSW11750|(% style="width:282px" %)Set the language of the Message List prompt** (ie series)**|(% style="width:452px" %)(((
1001 * =0: which is followed the project language
1002 * =1: English
1003 * =2: Chinese
1004 )))
1005 |=(% style="width: 160px;" %)HSW11756|(% style="width:282px" %)(((
1006 Access permission restrictions
1007
1008 (ig series and** **8000/9000 series with -R after system upgrade)
1009 )))|(% style="width:452px" %)(((
1010 * =0: LAN or the external network both OK
1011 * =1: Only LAN access
1012 * =2: Only external network can access
1013 * =3: Close the functions
1014 )))
1015 |=(% style="width: 160px;" %)HSW11757|(% style="width:282px" %)Enable the valid date of the dynamic installment password|(% style="width:452px" %)(((
1016 * =0: Disabled
1017 * =1: Enable
1018 )))
1019 |=(% style="width: 160px;" %)HSW11758|(% style="width:282px" %)Enable Screensaver|(% style="width:452px" %)(((
1020 * =0: Disabled
1021 * =1: Enable
1022 )))
1023 |=(% style="width: 160px;" %)HSW11759|(% style="width:282px" %)Screensaver interval time|(% style="width:452px" %)(((
1024 Set the time how long will enter Screensaver (Range 10~~43200s)
1025 )))
1026 |=(% style="width: 160px;" %)HSW11760|(% style="width:282px" %)Screensaver countdown|(% style="width:452px" %)Display the countdown to enter the Screensaver, unit: second.
1027 |=(% style="width: 160px;" %)HSW11761|(% style="width:282px" %)Screensaver screen number|(% style="width:452px" %)Set the screen number for Screensaver
1028 |=(% style="width: 160px;" %)(((
1029 HSW11762
1030 )))|(% style="width:282px" %)(((
1031 Dynamic screensaver control address
1032 )))|(% style="width:452px" %)(((
1033 HSX11762.0=0, initialize with project configuration;
1034
1035 HSX11762.0=1, initialize with special register configuration;
1036
1037 HSX11762.1=0, disable dynamic screensaver;
1038
1039 HSX11762.1=1, enable dynamic screensaver
1040 )))
1041 |=(% style="width: 160px;" %)(((
1042 HSW11763
1043 )))|(% style="width:282px" %)(((
1044 Waiting time to enter the dynamic screensaver
1045 )))|(% style="width:452px" %)(((
1046 Waiting time when the screen is not operated, range 1~~720 minutes
1047 )))
1048 |=(% style="width: 160px;" %)(((
1049 HSW11764
1050 )))|(% style="width:282px" %)(((
1051 Animated screensaver animation type
1052 )))|(% style="width:452px" %)(((
1053 ~=0: Raster,=1: Blinds,=2: Bubble
1054 )))
1055
1056 == Serial port communication configuration ==
1057
1058 (% class="table-bordered" %)
1059 |=(% scope="row" style="width: 102px;" %)Port|=(% style="width: 173px;" %)**Function**|=(% style="width: 122px;" %)**Address**|=(% colspan="2" style="width: 506px;" %)**Description**
1060 |(% colspan="1" rowspan="11" style="width:102px" %)COM1|(% style="width:173px" %)Communication mode|(% style="width:122px" %)HSW10061|(% colspan="2" style="width:506px" %)(((
1061 * =0: RS232
1062 * =1: RS485
1063 * =2: RS422
1064 )))
1065 |(% style="width:173px" %)Baud rate|(% style="width:122px" %)HSW10062|(% colspan="2" style="width:506px" %)(((
1066 * =0: 1200
1067 * =1: 2400
1068 * =2: 4800
1069 * =3: 9600
1070 * =4: 19200
1071 * =5: 38400
1072 * =6: 57600
1073 * =7: 115200
1074 * =8: 230400
1075 )))
1076 |(% style="width:173px" %)Data bit|(% style="width:122px" %)HSW10063|(% colspan="2" style="width:506px" %)(((
1077 * =7: 7 bit
1078 * =8: 8 bit
1079 )))
1080 |(% style="width:173px" %)Stop bit|(% style="width:122px" %)HSW10064|(% colspan="2" style="width:506px" %)(((
1081 * =1: 1 bit
1082 * =2: 2 bit
1083 )))
1084 |(% style="width:173px" %)Check bit|(% style="width:122px" %)HSW10065|(% colspan="2" style="width:506px" %)(((
1085 * =0: None
1086 * =1: ODD
1087 * =2: EVEN
1088 )))
1089 |(% style="width:173px" %)Wait timeout|(% style="width:122px" %)HSW10066|(% colspan="2" style="width:506px" %)(((
1090 * Unit: ms.
1091 * Range: 0 to 30000
1092 )))
1093 |(% style="width:173px" %)reveive timeout|(% style="width:122px" %)HSW10067|(% colspan="2" style="width:506px" %)(((
1094 * Unit: ms.
1095 * Range: 0 to 30000
1096 )))
1097 |(% style="width:173px" %)Retry time|(% style="width:122px" %)HSW10068|(% colspan="2" style="width:506px" %)(((
1098 * Unit: times.
1099 * Range: 0 to 100
1100 )))
1101 |(% style="width:173px" %)Retry timeout|(% style="width:122px" %)HSW10069|(% colspan="2" style="width:506px" %)(((
1102 * Unit: s.
1103 * Range: 0 to 300
1104 )))
1105 |(% style="width:173px" %)HMI station number|(% style="width:122px" %)HSW10070|(% colspan="2" style="width:506px" %)
1106 |(% style="width:173px" %)PLC station number|(% style="width:122px" %)HSW10071|(% colspan="2" style="width:506px" %)
1107 |(% colspan="1" rowspan="11" style="width:102px" %)COM1-2|(% style="width:173px" %)Communication mode|(% style="width:122px" %)HSW10094|(% colspan="2" style="width:506px" %)(((
1108 * =0: RS232
1109 * =1: RS485
1110 * =2: RS422
1111 * =6: RS485-2
1112 )))
1113 |(% style="width:173px" %)Baud rate|(% style="width:122px" %)HSW10095|(% colspan="2" style="width:506px" %)(((
1114 * =0: 1200
1115 * =1: 2400
1116 * =2: 4800
1117 * =3: 9600
1118 * =4: 19200
1119 * =5: 38400
1120 * =6: 57600
1121 * =7: 115200
1122 * =8: 230400
1123 )))
1124 |(% style="width:173px" %)Data bit|(% style="width:122px" %)HSW10096|(% colspan="2" style="width:506px" %)(((
1125 * =7: 7 bit
1126 * =8: 8 bit
1127 )))
1128 |(% style="width:173px" %)Stop bit|(% style="width:122px" %)HSW10097|(% colspan="2" style="width:506px" %)(((
1129 * =1: 1 bit
1130 * =2: 2 bit
1131 )))
1132 |(% style="width:173px" %)Check bit|(% style="width:122px" %)HSW10098|(% colspan="2" style="width:506px" %)(((
1133 * =0: None
1134 * =1: ODD
1135 * =2: EVEN
1136 )))
1137 |(% style="width:173px" %)Wait timeout|(% style="width:122px" %)HSW10099|(% colspan="2" style="width:506px" %)(((
1138 * Unit: ms.
1139 * Range: 0 to 30000
1140 )))
1141 |(% style="width:173px" %)receive timeout|(% style="width:122px" %)HSW10100|(% colspan="2" style="width:506px" %)(((
1142 * Unit: ms.
1143 * Range: 0 to 30000
1144 )))
1145 |(% style="width:173px" %)Retry time|(% style="width:122px" %)HSW10101|(% colspan="2" style="width:506px" %)(((
1146 * Unit: times.
1147 * Range: 0 to 100
1148 )))
1149 |(% style="width:173px" %)Retry timeout|(% style="width:122px" %)HSW10102|(% colspan="2" style="width:506px" %)(((
1150 * Unit: s.
1151 * Range: 0 to 30
1152 )))
1153 |(% style="width:173px" %)HMI station number|(% style="width:122px" %)HSW10103|(% colspan="2" style="width:506px" %)
1154 |(% style="width:173px" %)PLC station number|(% style="width:122px" %)HSW10104|(% colspan="2" style="width:506px" %)
1155 |(% colspan="1" rowspan="11" style="width:102px" %)COM1-3|(% style="width:173px" %)Communication mode|(% style="width:122px" %)HSW10120|(% colspan="2" style="width:506px" %)(((
1156 * =0: RS232
1157 * =1: RS485
1158 * =2: RS422
1159 * =6: RS485-2
1160 )))
1161 |(% style="width:173px" %)Baud rate|(% style="width:122px" %)HSW10121|(% colspan="2" style="width:506px" %)(((
1162 * =0: 1200
1163 * =1: 2400
1164 * =2: 4800
1165 * =3: 9600
1166 * =4: 19200
1167 * =5: 38400
1168 * =6: 57600
1169 * =7: 115200
1170 * =8: 230400
1171 )))
1172 |(% style="width:173px" %)Data bit|(% style="width:122px" %)HSW10122|(% colspan="2" style="width:506px" %)(((
1173 * =7: 7 bit
1174 * =8: 8 bit
1175 )))
1176 |(% style="width:173px" %)Stop bit|(% style="width:122px" %)HSW10123|(% colspan="2" style="width:506px" %)(((
1177 * =1: 1 bit
1178 * =2: 2 bit
1179 )))
1180 |(% style="width:173px" %)Check bit|(% style="width:122px" %)HSW10124|(% colspan="2" style="width:506px" %)(((
1181 * =0: None
1182 * =1: ODD
1183 * =2: EVEN
1184 )))
1185 |(% style="width:173px" %)Wait timeout|(% style="width:122px" %)HSW10125|(% colspan="2" style="width:506px" %)(((
1186 * Unit: ms.
1187 * Range: 0 to 30000
1188 )))
1189 |(% style="width:173px" %)receive timeout|(% style="width:122px" %)HSW10126|(% colspan="2" style="width:506px" %)(((
1190 * Unit: ms.
1191 * Range: 0 to 30000
1192 )))
1193 |(% style="width:173px" %)Retry time|(% style="width:122px" %)HSW10127|(% colspan="2" style="width:506px" %)(((
1194 * Unit: times.
1195 * Range: 0 to 100
1196 )))
1197 |(% style="width:173px" %)Retry timeout|(% style="width:122px" %)HSW10128|(% colspan="2" style="width:506px" %)(((
1198 * Unit: s.
1199 * Range: 0 to 30
1200 )))
1201 |(% style="width:173px" %)HMI station number|(% style="width:122px" %)HSW10129|(% colspan="2" style="width:506px" %)
1202 |(% style="width:173px" %)PLC station number|(% style="width:122px" %)HSW10130|(% colspan="2" style="width:506px" %)
1203 |(% colspan="1" rowspan="11" style="width:102px" %)COM2|(% style="width:173px" %)Communication mode|(% style="width:122px" %)HSW10072|(% colspan="2" style="width:506px" %)(((
1204 * =0: RS232
1205 * =1: RS485
1206 )))
1207 |(% style="width:173px" %)Baud rate|(% style="width:122px" %)HSW10073|(% colspan="2" style="width:506px" %)(((
1208 * =0: 1200
1209 * =1: 2400
1210 * =2: 4800
1211 * =3: 9600
1212 * =4: 19200
1213 * =5: 38400
1214 * =6: 57600
1215 * =7: 115200
1216 * =8: 230400
1217 )))
1218 |(% style="width:173px" %)Data bit|(% style="width:122px" %)HSW10074|(% colspan="2" style="width:506px" %)(((
1219 * =7: 7 bit
1220 * =8: 8 bit
1221 )))
1222 |(% style="width:173px" %)Stop bit|(% style="width:122px" %)HSW10075|(% colspan="2" style="width:506px" %)(((
1223 * =1: 1 bit
1224 * =2: 2 bit
1225 )))
1226 |(% style="width:173px" %)Check bit|(% style="width:122px" %)HSW10076|(% colspan="2" style="width:506px" %)(((
1227 * =0: None
1228 * =1: ODD
1229 * =2: EVEN
1230 )))
1231 |(% style="width:173px" %)Wait timeout|(% style="width:122px" %)HSW10077|(% colspan="2" style="width:506px" %)(((
1232 * Unit: ms.
1233 * Range: 0 to 30000
1234 )))
1235 |(% style="width:173px" %)receive timeout|(% style="width:122px" %)HSW10078|(% colspan="2" style="width:506px" %)(((
1236 * Unit: ms.
1237 * Range: 0 to 30000
1238 )))
1239 |(% style="width:173px" %)Retry time|(% style="width:122px" %)HSW10079|(% colspan="2" style="width:506px" %)(((
1240 * Unit: times.
1241 * Range: 0 to 100
1242 )))
1243 |(% style="width:173px" %)Retry timeout|(% style="width:122px" %)HSW10080|(% colspan="2" style="width:506px" %)(((
1244 * Unit: s.
1245 * Range: 0 to 30
1246 )))
1247 |(% style="width:173px" %)HMI station number|(% style="width:122px" %)HSW10081|(% colspan="2" style="width:506px" %)
1248 |(% style="width:173px" %)PLC station number|(% style="width:122px" %)HSW10082|(% colspan="2" style="width:506px" %)
1249 |(% colspan="1" rowspan="11" style="width:102px" %)COM2-2|(% style="width:173px" %)Communication mode|(% style="width:122px" %)HSW10105|(% colspan="2" style="width:506px" %)(((
1250 * =0: RS232
1251 * =1: RS485
1252 )))
1253 |(% style="width:173px" %)Baud rate|(% style="width:122px" %)HSW10106|(% colspan="2" style="width:506px" %)(((
1254 * =0: 1200
1255 * =1: 2400
1256 * =2: 4800
1257 * =3: 9600
1258 * =4: 19200
1259 * =5: 38400
1260 * =6: 57600
1261 * =7: 115200
1262 * =8: 230400
1263 )))
1264 |(% style="width:173px" %)Data bit|(% style="width:122px" %)HSW10107|(% colspan="2" style="width:506px" %)(((
1265 * =7: 7 bit
1266 * =8: 8 bit
1267 )))
1268 |(% style="width:173px" %)Stop bit|(% style="width:122px" %)HSW10108|(% colspan="2" style="width:506px" %)(((
1269 * =1: 1 bit
1270 * =2: 2 bit
1271 )))
1272 |(% style="width:173px" %)Check bit|(% style="width:122px" %)HSW10109|(% colspan="2" style="width:506px" %)(((
1273 * =0: None
1274 * =1: ODD
1275 * =2: EVEN
1276 )))
1277 |(% style="width:173px" %)Wait timeout|(% style="width:122px" %)HSW10110|(% colspan="2" style="width:506px" %)(((
1278 * Unit: ms.
1279 * Range: 0 to 30000
1280 )))
1281 |(% style="width:173px" %)receive timeout|(% style="width:122px" %)HSW10111|(% colspan="2" style="width:506px" %)(((
1282 * Unit: ms.
1283 * Range: 0 to 30000
1284 )))
1285 |(% style="width:173px" %)Retry time|(% style="width:122px" %)HSW10112|(% colspan="2" style="width:506px" %)(((
1286 * Unit: times.
1287 * Range: 0 to 100
1288 )))
1289 |(% style="width:173px" %)Retry timeout|(% style="width:122px" %)HSW10113|(% colspan="2" style="width:506px" %)(((
1290 * Unit: s.
1291 * Range: 0 to 30
1292 )))
1293 |(% style="width:173px" %)HMI station number|(% style="width:122px" %)HSW10114|(% colspan="2" style="width:506px" %)
1294 |(% style="width:173px" %)PLC station number|(% style="width:122px" %)HSW10115|(% colspan="2" style="width:506px" %)
1295 |(% colspan="1" rowspan="11" style="width:102px" %)COM3|(% style="width:173px" %)Communication mode|(% style="width:122px" %)HSW10083|(% colspan="2" style="width:506px" %)(((
1296 * =1: RS485
1297 )))
1298 |(% style="width:173px" %)Baud rate|(% style="width:122px" %)HSW10084|(% colspan="2" style="width:506px" %)(((
1299 * =0: 1200
1300 * =1: 2400
1301 * =2: 4800
1302 * =3: 9600
1303 * =4: 19200
1304 * =5: 38400
1305 * =6: 57600
1306 * =7: 115200
1307 * =8: 230400
1308 )))
1309 |(% style="width:173px" %)Data bit|(% style="width:122px" %)HSW10085|(% colspan="2" style="width:506px" %)(((
1310 * =7: 7 bit
1311 * =8: 8 bit
1312 )))
1313 |(% style="width:173px" %)Stop bit|(% style="width:122px" %)HSW10086|(% colspan="2" style="width:506px" %)(((
1314 * =1: 1 bit
1315 * =2: 2 bit
1316 )))
1317 |(% style="width:173px" %)Check bit|(% style="width:122px" %)HSW10087|(% colspan="2" style="width:506px" %)(((
1318 * =0: None
1319 * =1: ODD
1320 * =2: EVEN
1321 )))
1322 |(% style="width:173px" %)Wait timeout|(% style="width:122px" %)HSW10088|(% colspan="2" style="width:506px" %)(((
1323 * Unit: ms.
1324 * Range: 0 to 30000
1325 )))
1326 |(% style="width:173px" %)receive timeout|(% style="width:122px" %)HSW10089|(% colspan="2" style="width:506px" %)(((
1327 * Unit: ms.
1328 * Range: 0 to 30000
1329 )))
1330 |(% style="width:173px" %)Retry time|(% style="width:122px" %)HSW10090|(% colspan="2" style="width:506px" %)(((
1331 * Unit: times.
1332 * Range: 0 to 100
1333 )))
1334 |(% style="width:173px" %)Retry timeout|(% style="width:122px" %)HSW10091|(% colspan="2" style="width:506px" %)(((
1335 * Unit: s.
1336 * Range: 0 to 30
1337 )))
1338 |(% style="width:173px" %)HMI station number|(% style="width:122px" %)HSW10092|(% colspan="2" style="width:506px" %)
1339 |(% style="width:173px" %)PLC station number|(% style="width:122px" %)HSW10093|(% colspan="2" style="width:506px" %)
1340 |(% colspan="1" rowspan="2" style="width:102px" %)CAN port|(% style="width:173px" %)CAN1 baud rate|(% style="width:122px" %)HSW010116|(% style="width:299px" %)(((
1341 Unit: K, the baud rate must be an integer.
1342
1343 For example, when the baud rate required is 250000, just enter 250.
1344 )))|(% colspan="1" rowspan="2" style="width:218px" %)**✎Note: **If baud rate has been modified,please wait 5 seconds,then restart the HMI to take effect.
1345 |(% style="width:173px" %)CAN2 baud rate|(% style="width:122px" %)HSW010117|(% style="width:299px" %)(((
1346 Unit: K, the baud rate must be an integer.
1347
1348 For example, when the baud rate required is 250000, just enter 250.
1349 )))
1350
1351 == Ethernet communication configuration ==
1352
1353 (% class="table-bordered" %)
1354 |(% style="width:40px" %)**No.**|(% style="width:295px" %)**Function**|(% style="width:220px" %)**Address**|(% style="width:336px" %)**Description**
1355 |(% rowspan="7" style="width:40px" %)1|(% colspan="1" rowspan="7" style="width:295px" %)Ethernet parameter configuration for communication number 1 in list. Configure those addresses according to connected device. After configuration, wait for 5 seconds and restart the HMI.|(% style="width:220px" %)HSW11004|(% style="width:336px" %)Device IP address high word 1
1356 |(% style="width:220px" %)HSW11005|(% style="width:336px" %)Device IP address high word 2
1357 |(% style="width:220px" %)HSW11006|(% style="width:336px" %)Device IP address high word 3
1358 |(% style="width:220px" %)HSW11007|(% style="width:336px" %)Device IP address high word 4
1359 |(% style="width:220px" %)HSW11008|(% style="width:336px" %)Device Port number
1360 |(% style="width:220px" %)HSW11009|(% style="width:336px" %)(((
1361 ~=2 TCP
1362
1363 ~=3 UDP
1364 )))
1365 |(% style="width:220px" %)HSW11010|(% style="width:336px" %)Reserved
1366 |(% rowspan="7" style="width:40px" %)2|(% colspan="1" rowspan="7" style="width:295px" %)Ethernet parameter configuration for communication number 2 in list. Configure those addresses according to connected device. After configuration, wait for 5 seconds and restart the HMI.|(% style="width:220px" %)HSW11011|(% style="width:336px" %)Device IP address high word 1
1367 |(% style="width:220px" %)HSW11012|(% style="width:336px" %)Device IP address high word 2
1368 |(% style="width:220px" %)HSW11013|(% style="width:336px" %)Device IP address high word 3
1369 |(% style="width:220px" %)HSW11014|(% style="width:336px" %)Device IP address high word 4
1370 |(% style="width:220px" %)HSW11015|(% style="width:336px" %)Device Port number
1371 |(% style="width:220px" %)HSW11016|(% style="width:336px" %)(((
1372 ~=2 TCP
1373
1374 ~=3 UDP
1375 )))
1376 |(% style="width:220px" %)HSW11017|(% style="width:336px" %)Reserved
1377 |(% style="width:40px" %)…|(% style="width:295px" %) |(% style="width:220px" %)…|(% style="width:336px" %)…
1378 |(% rowspan="7" style="width:40px" %)32|(% colspan="1" rowspan="7" style="width:295px" %)Ethernet parameter configuration for communication number 32 in list. Configure those addresses according to connected device. After configuration, wait for 5 seconds and restart the HMI.|(% style="width:220px" %)HSW11221|(% style="width:336px" %)Device IP address high word 1
1379 |(% style="width:220px" %)HSW11222|(% style="width:336px" %)Device IP address high word 2
1380 |(% style="width:220px" %)HSW11223|(% style="width:336px" %)Device IP address high word 3
1381 |(% style="width:220px" %)HSW11224|(% style="width:336px" %)Device IP address high word 4
1382 |(% style="width:220px" %)HSW11225|(% style="width:336px" %)Device Port number
1383 |(% style="width:220px" %)HSW11226|(% style="width:336px" %)(((
1384 ~=2 TCP;
1385
1386 ~=3 UDP
1387 )))
1388 |(% style="width:220px" %)HSW11227|(% style="width:336px" %)Reserved
1389
1390 (% class="box infomessage" %)
1391 (((
1392 **✎Note:** The number of Ethernet connections supported by different HMI series varies.
1393 )))
1394
1395 == Communication control ==
1396
1397 (% class="table-bordered" %)
1398 |=(% style="width: 135px;" %)**Communication No.**|=(% style="width: 102px;" %)**Station No.**|=(% style="width: 185px;" %)**Control bit**|=(% style="width: 191px;" %)**Communication lamp**|=(% style="width: 271px;" %)**Description**
1399 |(% colspan="1" rowspan="16" style="width:135px" %)1|(% style="width:102px" %)0~~15|(% style="width:185px" %)HSX550.0～HSX550.15|(% style="width:191px" %)HSX558.0～HSX558.15|(% rowspan="160" style="width:271px" %)Communication number refers to the number in "Communication Port Configuration". A number provides 256 device station numbers. Each station number corresponds to a communication control bit and a communication indicator bit. Registers HSX550.0 to HSX805.15 are used to control the station numbers from 0 to 127, and registers HSX1150.0 to HSX1405.15 are used to control station numbers 128 to 255.
1400 |(% style="width:102px" %)16~~31|(% style="width:185px" %)HSX551.0～HSX551.15|(% style="width:191px" %)HSX559.0～HSX559.15
1401 |(% style="width:102px" %)32~~47|(% style="width:185px" %)HSX552.0～HSX552.15|(% style="width:191px" %)HSX560.0～HSX560.15
1402 |(% style="width:102px" %)48~~63|(% style="width:185px" %)HSX553.0～HSX553.15|(% style="width:191px" %)HSX561.0～HSX561.15
1403 |(% style="width:102px" %)64～79|(% style="width:185px" %)HSX554.0～HSX554.15|(% style="width:191px" %)HSX562.0～HSX562.15
1404 |(% style="width:102px" %)80～95|(% style="width:185px" %)HSX555.0～HSX555.15|(% style="width:191px" %)HSX563.0～HSX563.15
1405 |(% style="width:102px" %)96～111|(% style="width:185px" %)HSX556.0～HSX556.15|(% style="width:191px" %)HSX564.0～HSX564.15
1406 |(% style="width:102px" %)112～127|(% style="width:185px" %)HSX557.0～HSX557.15|(% style="width:191px" %)HSX565.0～HSX565.15
1407 |(% style="width:102px" %)128～143|(% style="width:185px" %)HSX1150.0～HSX1150.15|(% style="width:191px" %)HSX1158.0～HSX1158.15
1408 |(% style="width:102px" %)144～159|(% style="width:185px" %)HSX1151.0～HSX1151.15|(% style="width:191px" %)HSX1159.0～HSX1159.15
1409 |(% style="width:102px" %)160～175|(% style="width:185px" %)HSX1152.0～HSX1152.15|(% style="width:191px" %)HSX1160.0～HSX1160.15
1410 |(% style="width:102px" %)176～191|(% style="width:185px" %)HSX1153.0～HSX1153.15|(% style="width:191px" %)HSX1161.0～HSX1161.15
1411 |(% style="width:102px" %)192～207|(% style="width:185px" %)HSX1154.0～HSX1154.15|(% style="width:191px" %)HSX1162.0～HSX1162.15
1412 |(% style="width:102px" %)208～223|(% style="width:185px" %)HSX1155.0～HSX1155.15|(% style="width:191px" %)HSX1163.0～HSX1163.15
1413 |(% style="width:102px" %)224～239|(% style="width:185px" %)HSX1156.0～HSX1156.15|(% style="width:191px" %)HSX1164.0～HSX1164.15
1414 |(% style="width:102px" %)240～255|(% style="width:185px" %)HSX1157.0～HSX1157.15|(% style="width:191px" %)HSX1165.0～HSX1165.15
1415 |(% colspan="1" rowspan="16" style="width:135px" %)2|(% style="width:102px" %)0～15|(% style="width:185px" %)HSX566.0～HSX566.15|(% style="width:191px" %)HSX574.0～HSX574.15
1416 |(% style="width:102px" %)16～31|(% style="width:185px" %)HSX567.0～HSX567.15|(% style="width:191px" %)HSX575.0～HSX575.15
1417 |(% style="width:102px" %)32～47|(% style="width:185px" %)HSX568.0～HSX568.15|(% style="width:191px" %)HSX576.0～HSX576.15
1418 |(% style="width:102px" %)48～63|(% style="width:185px" %)HSX569.0～HSX569.15|(% style="width:191px" %)HSX577.0～HSX577.15
1419 |(% style="width:102px" %)64～79|(% style="width:185px" %)HSX570.0～HSX570.15|(% style="width:191px" %)HSX578.0～HSX578.15
1420 |(% style="width:102px" %)80～95|(% style="width:185px" %)HSX571.0～HSX571.15|(% style="width:191px" %)HSX579.0～HSX579.15
1421 |(% style="width:102px" %)96～111|(% style="width:185px" %)HSX572.0～HSX572.15|(% style="width:191px" %)HSX580.0～HSX580.15
1422 |(% style="width:102px" %)112～127|(% style="width:185px" %)HSX573.0～HSX573.15|(% style="width:191px" %)HSX581.0～HSX581.15
1423 |(% style="width:102px" %)128～143|(% style="width:185px" %)HSX1166.0～HSX1166.15|(% style="width:191px" %)HSX1174.0～HSX1174.15
1424 |(% style="width:102px" %)144～159|(% style="width:185px" %)HSX1167.0～HSX1167.15|(% style="width:191px" %)HSX1175.0～HSX1175.15
1425 |(% style="width:102px" %)160～175|(% style="width:185px" %)HSX1168.0～HSX1168.15|(% style="width:191px" %)HSX1176.0～HSX1176.15
1426 |(% style="width:102px" %)176～191|(% style="width:185px" %)HSX1169.0～HSX1169.15|(% style="width:191px" %)HSX1177.0～HSX1177.15
1427 |(% style="width:102px" %)192～207|(% style="width:185px" %)HSX1170.0～HSX1170.15|(% style="width:191px" %)HSX1178.0～HSX1178.15
1428 |(% style="width:102px" %)208～223|(% style="width:185px" %)HSX1171.0～HSX1171.15|(% style="width:191px" %)HSX1179.0～HSX1179.15
1429 |(% style="width:102px" %)224～239|(% style="width:185px" %)HSX1172.0～HSX1172.15|(% style="width:191px" %)HSX1180.0～HSX1180.15
1430 |(% style="width:102px" %)240～255|(% style="width:185px" %)HSX1173.0～HSX1173.15|(% style="width:191px" %)HSX1181.0～HSX1181.15
1431 |(% colspan="1" rowspan="16" style="width:135px" %)3|(% style="width:102px" %)0～15|(% style="width:185px" %)HSX582.0～HSX582.15|(% style="width:191px" %)HSX590.0～HSX590.15
1432 |(% style="width:102px" %)16～31|(% style="width:185px" %)HSX583.0～HSX583.15|(% style="width:191px" %)HSX591.0～HSX591.15
1433 |(% style="width:102px" %)32～47|(% style="width:185px" %)HSX584.0～HSX584.15|(% style="width:191px" %)HSX592.0～HSX592.15
1434 |(% style="width:102px" %)48～63|(% style="width:185px" %)HSX585.0～HSX585.15|(% style="width:191px" %)HSX593.0～HSX593.15
1435 |(% style="width:102px" %)64～79|(% style="width:185px" %)HSX586.0～HSX586.15|(% style="width:191px" %)HSX594.0～HSX594.15
1436 |(% style="width:102px" %)80～95|(% style="width:185px" %)HSX587.0～HSX587.15|(% style="width:191px" %)HSX595.0～HSX595.15
1437 |(% style="width:102px" %)96～111|(% style="width:185px" %)HSX588.0～HSX588.15|(% style="width:191px" %)HSX596.0～HSX596.15
1438 |(% style="width:102px" %)112～127|(% style="width:185px" %)HSX589.0～HSX589.15|(% style="width:191px" %)HSX597.0～HSX597.15
1439 |(% style="width:102px" %)128～143|(% style="width:185px" %)HSX1182.0～HSX1182.15|(% style="width:191px" %)HSX1190.0～HSX1190.15
1440 |(% style="width:102px" %)144～159|(% style="width:185px" %)HSX1183.0～HSX1183.15|(% style="width:191px" %)HSX1191.0～HSX1191.15
1441 |(% style="width:102px" %)160～175|(% style="width:185px" %)HSX1184.0～HSX1184.15|(% style="width:191px" %)HSX1192.0～HSX1192.15
1442 |(% style="width:102px" %)176～191|(% style="width:185px" %)HSX1185.0～HSX1185.15|(% style="width:191px" %)HSX1193.0～HSX1193.15
1443 |(% style="width:102px" %)192～207|(% style="width:185px" %)HSX1186.0～HSX1186.15|(% style="width:191px" %)HSX1194.0～HSX1194.15
1444 |(% style="width:102px" %)208～223|(% style="width:185px" %)HSX1187.0～HSX1187.15|(% style="width:191px" %)HSX1195.0～HSX1195.15
1445 |(% style="width:102px" %)224～239|(% style="width:185px" %)HSX1188.0～HSX1188.15|(% style="width:191px" %)HSX1196.0～HSX1196.15
1446 |(% style="width:102px" %)240～255|(% style="width:185px" %)HSX1189.0～HSX1189.15|(% style="width:191px" %)HSX1197.0～HSX1197.15
1447 |(% colspan="1" rowspan="16" style="width:135px" %)4|(% style="width:102px" %)0～15|(% style="width:185px" %)HSX598.0～HSX598.15|(% style="width:191px" %)HSX606.0～HSX606.15
1448 |(% style="width:102px" %)16～31|(% style="width:185px" %)HSX599.0～HSX599.15|(% style="width:191px" %)HSX607.0～HSX607.15
1449 |(% style="width:102px" %)32～47|(% style="width:185px" %)HSX600.0～HSX600.15|(% style="width:191px" %)HSX608.0～HSX608.15
1450 |(% style="width:102px" %)48～63|(% style="width:185px" %)HSX601.0～HSX601.15|(% style="width:191px" %)HSX609.0～HSX609.15
1451 |(% style="width:102px" %)64～79|(% style="width:185px" %)HSX602.0～HSX602.15|(% style="width:191px" %)HSX610.0～HSX610.15
1452 |(% style="width:102px" %)80～95|(% style="width:185px" %)HSX603.0～HSX603.15|(% style="width:191px" %)HSX611.0～HSX611.15
1453 |(% style="width:102px" %)96～111|(% style="width:185px" %)HSX604.0～HSX604.15|(% style="width:191px" %)HSX612.0～HSX612.15
1454 |(% style="width:102px" %)112～127|(% style="width:185px" %)HSX605.0～HSX605.15|(% style="width:191px" %)HSX613.0～HSX613.15
1455 |(% style="width:102px" %)128～143|(% style="width:185px" %)HSX1198.0～HSX1198.15|(% style="width:191px" %)HSX1206.0～HSX1206.15
1456 |(% style="width:102px" %)144～159|(% style="width:185px" %)HSX1199.0～HSX1199.15|(% style="width:191px" %)HSX1207.0～HSX1207.15
1457 |(% style="width:102px" %)160～175|(% style="width:185px" %)HSX1200.0～HSX1200.15|(% style="width:191px" %)HSX1208.0～HSX1208.15
1458 |(% style="width:102px" %)176～191|(% style="width:185px" %)HSX1201.0～HSX1201.15|(% style="width:191px" %)HSX1209.0～HSX1209.15
1459 |(% style="width:102px" %)192～207|(% style="width:185px" %)HSX1202.0～HSX1202.15|(% style="width:191px" %)HSX1210.0～HSX1210.15
1460 |(% style="width:102px" %)208～223|(% style="width:185px" %)HSX1203.0～HSX1203.15|(% style="width:191px" %)HSX1211.0～HSX1211.15
1461 |(% style="width:102px" %)224～239|(% style="width:185px" %)HSX1204.0～HSX1204.15|(% style="width:191px" %)HSX1212.0～HSX1212.15
1462 |(% style="width:102px" %)240～255|(% style="width:185px" %)HSX1205.0～HSX1205.15|(% style="width:191px" %)HSX1213.0～HSX1213.15
1463 |(% colspan="1" rowspan="16" style="width:135px" %)5|(% style="width:102px" %)0～15|(% style="width:185px" %)HSX614.0～HSX614.15|(% style="width:191px" %)HSX622.0～HSX622.15
1464 |(% style="width:102px" %)16～31|(% style="width:185px" %)HSX615.0～HSX615.15|(% style="width:191px" %)HSX623.0～HSX623.15
1465 |(% style="width:102px" %)32～47|(% style="width:185px" %)HSX616.0～HSX616.15|(% style="width:191px" %)HSX624.0～HSX624.15
1466 |(% style="width:102px" %)48～63|(% style="width:185px" %)HSX617.0～HSX617.15|(% style="width:191px" %)HSX625.0～HSX625.15
1467 |(% style="width:102px" %)64～79|(% style="width:185px" %)HSX618.0～HSX618.15|(% style="width:191px" %)HSX626.0～HSX626.15
1468 |(% style="width:102px" %)80～95|(% style="width:185px" %)HSX619.0～HSX619.15|(% style="width:191px" %)HSX627.0～HSX627.15
1469 |(% style="width:102px" %)96～111|(% style="width:185px" %)HSX620.0～HSX620.15|(% style="width:191px" %)HSX628.0～HSX628.15
1470 |(% style="width:102px" %)112～127|(% style="width:185px" %)HSX621.0～HSX621.15|(% style="width:191px" %)HSX629.0～HSX629.15
1471 |(% style="width:102px" %)128～143|(% style="width:185px" %)HSX1214.0～HSX1214.15|(% style="width:191px" %)HSX1222.0～HSX1222.15
1472 |(% style="width:102px" %)144～159|(% style="width:185px" %)HSX1215.0～HSX1215.15|(% style="width:191px" %)HSX1223.0～HSX1223.15
1473 |(% style="width:102px" %)160～175|(% style="width:185px" %)HSX1216.0～HSX1216.15|(% style="width:191px" %)HSX1224.0～HSX1224.15
1474 |(% style="width:102px" %)176～191|(% style="width:185px" %)HSX1217.0～HSX1217.15|(% style="width:191px" %)HSX1225.0～HSX1225.15
1475 |(% style="width:102px" %)192～207|(% style="width:185px" %)HSX1218.0～HSX1218.15|(% style="width:191px" %)HSX1226.0～HSX1226.15
1476 |(% style="width:102px" %)208～223|(% style="width:185px" %)HSX1219.0～HSX1219.15|(% style="width:191px" %)HSX1227.0～HSX1227.15
1477 |(% style="width:102px" %)224～239|(% style="width:185px" %)HSX1220.0～HSX1220.15|(% style="width:191px" %)HSX1228.0～HSX1228.15
1478 |(% style="width:102px" %)240～255|(% style="width:185px" %)HSX1221.0～HSX1221.15|(% style="width:191px" %)HSX1229.0～HSX1229.15
1479 |(% colspan="1" rowspan="16" style="width:135px" %)6|(% style="width:102px" %)0～15|(% style="width:185px" %)HSX630.0～HSX630.15|(% style="width:191px" %)HSX638.0～HSX638.15
1480 |(% style="width:102px" %)16～31|(% style="width:185px" %)HSX631.0～HSX631.15|(% style="width:191px" %)HSX639.0～HSX639.15
1481 |(% style="width:102px" %)32～47|(% style="width:185px" %)HSX632.0～HSX632.15|(% style="width:191px" %)HSX640.0～HSX640.15
1482 |(% style="width:102px" %)48～63|(% style="width:185px" %)HSX633.0～HSX633.15|(% style="width:191px" %)HSX641.0～HSX641.15
1483 |(% style="width:102px" %)64～79|(% style="width:185px" %)HSX634.0～HSX634.15|(% style="width:191px" %)HSX642.0～HSX642.15
1484 |(% style="width:102px" %)80～95|(% style="width:185px" %)HSX635.0～HSX635.15|(% style="width:191px" %)HSX643.0～HSX643.15
1485 |(% style="width:102px" %)96～111|(% style="width:185px" %)HSX636.0～HSX636.15|(% style="width:191px" %)HSX644.0～HSX644.15
1486 |(% style="width:102px" %)112～127|(% style="width:185px" %)HSX637.0～HSX637.15|(% style="width:191px" %)HSX645.0～HSX645.15
1487 |(% style="width:102px" %)128～143|(% style="width:185px" %)HSX1230.0～HSX1230.15|(% style="width:191px" %)HSX1238.0～HSX1238.15
1488 |(% style="width:102px" %)144～159|(% style="width:185px" %)HSX1231.0～HSX1231.15|(% style="width:191px" %)HSX1239.0～HSX1239.15
1489 |(% style="width:102px" %)160～175|(% style="width:185px" %)HSX1232.0～HSX1232.15|(% style="width:191px" %)HSX1240.0～HSX1240.15
1490 |(% style="width:102px" %)176～191|(% style="width:185px" %)HSX1233.0～HSX1233.15|(% style="width:191px" %)HSX1241.0～HSX1241.15
1491 |(% style="width:102px" %)192～207|(% style="width:185px" %)HSX1234.0～HSX1234.15|(% style="width:191px" %)HSX1242.0～HSX1242.15
1492 |(% style="width:102px" %)208～223|(% style="width:185px" %)HSX1235.0～HSX1235.15|(% style="width:191px" %)HSX1243.0～HSX1243.15
1493 |(% style="width:102px" %)224～239|(% style="width:185px" %)HSX1236.0～HSX1236.15|(% style="width:191px" %)HSX1244.0～HSX1244.15
1494 |(% style="width:102px" %)240～255|(% style="width:185px" %)HSX1237.0～HSX1237.15|(% style="width:191px" %)HSX1245.0～HSX1245.15
1495 |(% colspan="1" rowspan="16" style="width:135px" %)7|(% style="width:102px" %)0～15|(% style="width:185px" %)HSX646.0～HSX646.15|(% style="width:191px" %)HSX654.0～HSX654.15
1496 |(% style="width:102px" %)16～31|(% style="width:185px" %)HSX647.0～HSX647.15|(% style="width:191px" %)HSX655.0～HSX655.15
1497 |(% style="width:102px" %)32～47|(% style="width:185px" %)HSX648.0～HSX648.15|(% style="width:191px" %)HSX656.0～HSX656.15
1498 |(% style="width:102px" %)48～63|(% style="width:185px" %)HSX649.0～HSX649.15|(% style="width:191px" %)HSX657.0～HSX657.15
1499 |(% style="width:102px" %)64～79|(% style="width:185px" %)HSX650.0～HSX650.15|(% style="width:191px" %)HSX658.0～HSX658.15
1500 |(% style="width:102px" %)80～95|(% style="width:185px" %)HSX651.0～HSX651.15|(% style="width:191px" %)HSX659.0～HSX659.15
1501 |(% style="width:102px" %)96～111|(% style="width:185px" %)HSX652.0～HSX652.15|(% style="width:191px" %)HSX660.0～HSX660.15
1502 |(% style="width:102px" %)112～127|(% style="width:185px" %)HSX653.0～HSX653.15|(% style="width:191px" %)HSX661.0～HSX661.15
1503 |(% style="width:102px" %)128～143|(% style="width:185px" %)HSX1246.0～HSX1246.15|(% style="width:191px" %)HSX1254.0～HSX1254.15
1504 |(% style="width:102px" %)144～159|(% style="width:185px" %)HSX1247.0～HSX1247.15|(% style="width:191px" %)HSX1255.0～HSX1255.15
1505 |(% style="width:102px" %)160～175|(% style="width:185px" %)HSX1248.0～HSX1248.15|(% style="width:191px" %)HSX1256.0～HSX1256.15
1506 |(% style="width:102px" %)176～191|(% style="width:185px" %)HSX1249.0～HSX1249.15|(% style="width:191px" %)HSX1257.0～HSX1257.15
1507 |(% style="width:102px" %)192～207|(% style="width:185px" %)HSX1250.0～HSX1250.15|(% style="width:191px" %)HSX1258.0～HSX1258.15
1508 |(% style="width:102px" %)208～223|(% style="width:185px" %)HSX1251.0～HSX1251.15|(% style="width:191px" %)HSX1259.0～HSX1259.15
1509 |(% style="width:102px" %)224～239|(% style="width:185px" %)HSX1252.0～HSX1252.15|(% style="width:191px" %)HSX1260.0～HSX1260.15
1510 |(% style="width:102px" %)240～255|(% style="width:185px" %)HSX1253.0～HSX1253.15|(% style="width:191px" %)HSX1261.0～HSX1261.15
1511 |(% colspan="1" rowspan="16" style="width:135px" %)8|(% style="width:102px" %)0～15|(% style="width:185px" %)HSX662.0～HSX662.15|(% style="width:191px" %)HSX670.0～HSX670.15
1512 |(% style="width:102px" %)16～31|(% style="width:185px" %)HSX663.0～HSX663.15|(% style="width:191px" %)HSX671.0～HSX671.15
1513 |(% style="width:102px" %)32～47|(% style="width:185px" %)HSX664.0～HSX664.15|(% style="width:191px" %)HSX672.0～HSX672.15
1514 |(% style="width:102px" %)48～63|(% style="width:185px" %)HSX665.0～HSX665.15|(% style="width:191px" %)HSX673.0～HSX673.15
1515 |(% style="width:102px" %)64～79|(% style="width:185px" %)HSX666.0～HSX666.15|(% style="width:191px" %)HSX674.0～HSX674.15
1516 |(% style="width:102px" %)80～95|(% style="width:185px" %)HSX667.0～HSX667.15|(% style="width:191px" %)HSX675.0～HSX675.15
1517 |(% style="width:102px" %)96～111|(% style="width:185px" %)HSX668.0～HSX668.15|(% style="width:191px" %)HSX676.0～HSX676.15
1518 |(% style="width:102px" %)112～127|(% style="width:185px" %)HSX669.0～HSX669.15|(% style="width:191px" %)HSX677.0～HSX677.15
1519 |(% style="width:102px" %)128～143|(% style="width:185px" %)HSX1262.0～HSX1262.15|(% style="width:191px" %)HSX1270.0～HSX1270.15
1520 |(% style="width:102px" %)144～159|(% style="width:185px" %)HSX1263.0～HSX1263.15|(% style="width:191px" %)HSX1271.0～HSX1271.15
1521 |(% style="width:102px" %)160～175|(% style="width:185px" %)HSX1264.0～HSX1264.15|(% style="width:191px" %)HSX1272.0～HSX1272.15
1522 |(% style="width:102px" %)176～191|(% style="width:185px" %)HSX1265.0～HSX1265.15|(% style="width:191px" %)HSX1273.0～HSX1273.15
1523 |(% style="width:102px" %)192～207|(% style="width:185px" %)HSX1266.0～HSX1266.15|(% style="width:191px" %)HSX1274.0～HSX1274.15
1524 |(% style="width:102px" %)208～223|(% style="width:185px" %)HSX1267.0～HSX1267.15|(% style="width:191px" %)HSX1275.0～HSX1275.15
1525 |(% style="width:102px" %)224～239|(% style="width:185px" %)HSX1268.0～HSX1268.15|(% style="width:191px" %)HSX1276.0～HSX1276.15
1526 |(% style="width:102px" %)240～255|(% style="width:185px" %)HSX1269.0～HSX1269.15|(% style="width:191px" %)HSX1277.0～HSX1277.15
1527 |(% rowspan="4" style="width:135px" %)9|(% style="width:102px" %)0~~15|(% style="width:185px" %)HSX678.0~~678.15|(% style="width:191px" %)HSX686.0~~686.15
1528 |(% style="width:102px" %)16~~31|(% style="width:185px" %)HSX679.0~~679.15|(% style="width:191px" %)HSX687.0~~687.15
1529 |(% style="width:102px" %)32~~47|(% style="width:185px" %)HSX680.0~~680.15|(% style="width:191px" %)HSX688.0~~688.15
1530 |(% style="width:102px" %)48~~63|(% style="width:185px" %)HSX681.0~~681.15|(% style="width:191px" %)HSX689.0~~689.15
1531 |(% rowspan="4" style="width:135px" %)10|(% style="width:102px" %)0~~15|(% style="width:185px" %)HSX694.0~~694.15|(% style="width:191px" %)HSX702.0~~702.15
1532 |(% style="width:102px" %)16~~31|(% style="width:185px" %)HSX695.0~~695.15|(% style="width:191px" %)HSX703.0~~703.15
1533 |(% style="width:102px" %)32~~47|(% style="width:185px" %)HSX696.0~~696.15|(% style="width:191px" %)HSX704.0~~704.15
1534 |(% style="width:102px" %)48~~63|(% style="width:185px" %)HSX697.0~~697.15|(% style="width:191px" %)HSX705.0~~705.15
1535 |(% rowspan="4" style="width:135px" %)11|(% style="width:102px" %)0~~15|(% style="width:185px" %)HSX710.0~~710.15|(% style="width:191px" %)HSX718.0~~718.15
1536 |(% style="width:102px" %)16~~31|(% style="width:185px" %)HSX711.0~~711.15|(% style="width:191px" %)HSX719.0~~719.15
1537 |(% style="width:102px" %)32~~47|(% style="width:185px" %)HSX712.0~~712.15|(% style="width:191px" %)HSX720.0~~720.15
1538 |(% style="width:102px" %)48~~63|(% style="width:185px" %)HSX713.0~~713.15|(% style="width:191px" %)HSX721.0~~721.15
1539 |(% rowspan="4" style="width:135px" %)12|(% style="width:102px" %)0~~15|(% style="width:185px" %)HSX726.0~~726.15|(% style="width:191px" %)HSX734.0~~734.15
1540 |(% style="width:102px" %)16~~31|(% style="width:185px" %)HSX727.0~~727.15|(% style="width:191px" %)HSX735.0~~735.15
1541 |(% style="width:102px" %)32~~47|(% style="width:185px" %)HSX728.0~~728.15|(% style="width:191px" %)HSX736.0~~736.15
1542 |(% style="width:102px" %)48~~63|(% style="width:185px" %)HSX729.0~~729.15|(% style="width:191px" %)HSX737.0~~737.15
1543 |(% rowspan="4" style="width:135px" %)13|(% style="width:102px" %)0~~15|(% style="width:185px" %)HSX742.0~~742.15|(% style="width:191px" %)HSX750.0~~750.15
1544 |(% style="width:102px" %)16~~31|(% style="width:185px" %)HSX743.0~~743.15|(% style="width:191px" %)HSX751.0~~751.15
1545 |(% style="width:102px" %)32~~47|(% style="width:185px" %)HSX744.0~~744.15|(% style="width:191px" %)HSX752.0~~752.15
1546 |(% style="width:102px" %)48~~63|(% style="width:185px" %)HSX745.0~~745.15|(% style="width:191px" %)HSX753.0~~753.15
1547 |(% rowspan="4" style="width:135px" %)14|(% style="width:102px" %)0~~15|(% style="width:185px" %)HSX758.0~~758.15|(% style="width:191px" %)HSX766.0~~766.15
1548 |(% style="width:102px" %)16~~31|(% style="width:185px" %)HSX759.0~~759.15|(% style="width:191px" %)HSX767.0~~767.15
1549 |(% style="width:102px" %)32~~47|(% style="width:185px" %)HSX760.0~~760.15|(% style="width:191px" %)HSX768.0~~768.15
1550 |(% style="width:102px" %)48~~63|(% style="width:185px" %)HSX761.0~~761.15|(% style="width:191px" %)HSX769.0~~769.15
1551 |(% rowspan="4" style="width:135px" %)15|(% style="width:102px" %)0~~15|(% style="width:185px" %)HSX774.0~~774.15|(% style="width:191px" %)HSX782.0~~782.15
1552 |(% style="width:102px" %)16~~31|(% style="width:185px" %)HSX775.0~~775.15|(% style="width:191px" %)HSX783.0~~783.15
1553 |(% style="width:102px" %)32~~47|(% style="width:185px" %)HSX776.0~~776.15|(% style="width:191px" %)HSX784.0~~784.15
1554 |(% style="width:102px" %)48~~63|(% style="width:185px" %)HSX777.0~~777.15|(% style="width:191px" %)HSX785.0~~785.15
1555 |(% rowspan="4" style="width:135px" %)16|(% style="width:102px" %)0~~15|(% style="width:185px" %)HSX790.0~~790.15|(% style="width:191px" %)HSX798.0~~798.15
1556 |(% style="width:102px" %)16~~31|(% style="width:185px" %)HSX791.0~~791.15|(% style="width:191px" %)HSX799.0~~799.15
1557 |(% style="width:102px" %)32~~47|(% style="width:185px" %)HSX792.0~~792.15|(% style="width:191px" %)HSX800.0~~800.15
1558 |(% style="width:102px" %)48~~63|(% style="width:185px" %)HSX793.0~~793.15|(% style="width:191px" %)HSX801.0~~801.15