Wiki source code of 13.HMI Internal Registers

Version 32.1 by Mora Zhou on 2023/11/21 16:20

version	line-number	content
1.1	1	= Introduction =
	2
	3	HMI provide four types of HMI address for user. You can use them as temporary variables of the program. The use is consistent with the way access to the PLC register. You could also reference through the address, PIStudio provides three types of such memory.
	4
	5	*HSW, HDW, HUW, HAW are word address, HSX, HDX, HUX, HAX are bit address.
	6
7.1	7	* System data area (HSW): A special register defined by the system.
	8	* Data storage area (HDW/HDX): Users store user data.
	9	* System data area (HUW): A special register defined by the system.
	10	* System Data (HAW): System register used for power-off save.
	11	* Recipe index area (RPW): System register used for recipe index.
1.1	12
	13	HMI internal registers are divided into bit address and word address, which can be accessed in two ways (take HDW as an example).
	14
3.1	15	* Access as word with the prefix "HDW".
	16	** HDW0 means the 1st word of system data area. HDW1 means the 2nd word of system data area.
	17	* Access as bit with the prefix "HDX". The number before "." i". The number before Access in bit with the prefix "HD". The number before Access in bit with the prefix "HDX". The number before "." indicates the number of the word. The number after "." indicates the bit number of the word.
	18	** HDX1020.12 means to access the system data area in bit mode, the specific location is the 13th bit of the 1020 word.
1.1	19
3.1	20	(% class="box infomessage" %)
	21	(((
1.1	22	✎Note:
	23
	24	* Addresses in HDX are the bits from words in HDW, so be careful when using addresses. For example, HDX1020.12 is the 13th bit to access the 1020 word. The value of this bit is the same as that of the word accessed through HDW001020. The 13th bit of this word is actually the same bit as HDX1020.12.
	25	* The address of the bit address HDX is with a decimal point while word addresses are integers.
3.1	26	)))
1.1	27
18.1	28	= Address ranges table =
	29
29.1	30	(% style="text-align:center" %)
	31	[[image:6.png]]
18.1	32
1.1	33	= Data storage area (HDW/HDX) =
	34
	35	It is used to save the temporary data of project.
	36
	37	1. Access as word, and serial number range is from HDW0 to HDW299999.
	38	1. Access as bit, and serial number range is from HDX0.0 to HDX299999.15.
	39
	40	= Power-down save area (HAW/HAX) =
	41
	42	It is system registers used for power-off save.
	43
	44	1. Access as word, and serial number range is from HAW0 to HAW199999.
	45	1. Access as bit, and serial number range is from HAX0.0 to HAX199999.15.
	46
3.1	47	(% class="box infomessage" %)
	48	(((
1.1	49	✎Note:
	50
	51	* HAW/HAX is power-down retention. The register of this type is able to save the data before the power-down.
	52	* To avoid possible device failure, do not immediately power off and reboot when configuring the power-down save addre
3.1	53	)))
1.1	54
	55	= Recipe index area (RPW) =
	56
	57	It is system recipe data power-off save register. The range is from RPW000000 to RPW990450.
	58
31.1	59	(% class="box infomessage" %)
	60	(((
1.1	61	✎Note:
	62
	63	* RPW is power-down retention. The register of this type is able to save the data before the power-down.
	64	* To avoid possible device failure, do not immediately power off and reboot when configuring the power-down save addre
31.1	65	)))
1.1	66
	67	= Single user data area (HUW/HUX) =
	68
	69	It is used for system special registers (reserved by system).
	70
23.1	71	1. Access as word, and serial number range is from HUW0 to HUW1599.
	72	1. Access as bit, and serial number range is from HUX0.0 to HUX1599.15.
1.1	73
32.1	74	(% class="box infomessage" %)
	75	(((
1.1	76	✎Note:
	77
	78	* HUW/HUX is a system special register, so please check the system special register list during use. Please use the address specified in the table and do not use the address which is not mentioned in the table.
32.1	79	)))
1.1	80
	81	(% class="table-bordered" %)
	82	\|=Special register address\|=Description\|=Function
	83	\|=HUW0\|Screen switch\|A single terminal controls the screen switching, and all terminals do not affect each other.
	84	\|=HUW110~~HUW119\|(% rowspan="26" %)Addresses of the built-in keyboard\|The T9 input method stores the selected seria number length
	85	\|=HUW120~~HUW129\|The T9 input method stores the selected Chinese Pinyin length
	86	\|=HUW135\|Input method: first input
	87	\|=HUW136\|Button: T9 Chinese Pinyin page
	88	\|=HUW137\|Button: T9 Chinese characters page
	89	\|=HUW138\|Button: symbol
	90	\|=HUW139\|Button: switch
	91	\|=HUW140\|Button: Chinese characters 1
	92	\|=HUW142\|Button: Chinese characters 2
	93	\|=HUW144\|Button: Chinese characters 3
	94	\|=HUW146\|Button: Chinese characters 4
	95	\|=HUW148\|Button: Chinese characters 5
	96	\|=HUW150\|Button: Chinese characters 6
	97	\|=HUW152\|Button: Chinese characters 7
	98	\|=HUW154\|Button: Chinese characters 8
	99	\|=HUW156\|Button: Chinese characters 9
	100	\|=HUW158\|Button: Chinese characters 10
	101	\|=HUW160~~HUW169\|Button: Chinese Pinyin 1
	102	\|=HUW170~~HUW179\|Button: Chinese Pinyin 2
	103	\|=HUW180~~HUW189\|Button: Chinese Pinyin 3
	104	\|=HUW190~~HUW199\|Button: Chinese Pinyin 4
	105	\|=HUW200~~HUW699\|Input method cache length
	106	\|=HUW700~~HUW749\|Minimum value of the input method
	107	\|=HUW750~~HUW799\|Maximum value of the input method
	108	\|=HUW800\|Case switching of the input method
	109	\|=HUW801~~HUW900\|Input method format cache length
	110	\|=HUW1000\|(% rowspan="12" %)Addresses of user permission\|OK (Sign in)
	111	\|=HUW1001\|Result of operation
	112	\|=HUW1002~~1005\|Old password
	113	\|=HUW1006~~1009\|New password
	114	\|=HUW1010~~1013\|Confirm password
	115	\|=HUW1014~~1029\|New user name
	116	\|=HUW1030~~1157\|States information of user permission
	117	\|=HUW1158~~1335\|User name (Only or drop-down list object)
	118	\|=HUW1336~~1345\|User name description or note
	119	\|=HUW1347\|Hidden function configurations
	120	\|=HUW1348\|Permission settings
	121	\|=HUW1349\|Current user name
	122	\|=HUW1382\|User sign in way\|(((
	123	* 0: Select the user name from drop-down list object for signing in
	124	* 1: Enter the user name in Character Input/Display object for signing in (HUW1014)
	125	)))
	126	\|=HUW1400\|Time interval from last operation\|(((
	127	Shows how long the touch screen has not been clicked, in seconds. 32-bit unsigned integer
	128
	129	✎Note: Clicking by different users will only clear the corresponding register of the currently operating terminal, and the registers on other terminals (such as mobile phones, computers) will not be cleared.
	130	)))
	131	\|=HUW1402\|Keyboard note\|It saves the text information of the keyboard notes when clicking object(HUW1402-HUW1433)
	132	\|=HUW1436\|Current object level\|Indicate current object security level
	133
	134	= Special data area (HSW/HSX) =
	135
	136	It is used for system special registers (reserved by system).
	137
	138	1. Access as word, and serial number range is from HSW0 to HSW49999. (HSW10000 to HSW19999 are the power-off storage areas)
	139	1. Access as bit, and serial number range is from HSX0.0 to HSX49999.15.
	140
	141	✎Note:
	142
	143	* HSW / HSX are a system special register, so please check the system special register list during use. Please use the address specified in the table and do not use the address which is not mentioned in the table.
	144	* To avoid possible device failure, do not immediately power off and reboot when configuring the power-down save address.
	145
	146	(% class="table-bordered" style="width:1024px" %)
	147	\|=(% scope="row" style="width: 160px;" %)Address\|=(% style="width: 282px;" %)Function\|=(% style="width: 452px;" %)Description
	148	\|=(% style="width: 160px;" %)HSW0\|(% style="width:282px" %)Language switch\|(% style="width:452px" %)Multiple language could be set in the project, HMI support maximum 8 languages. (Power-down save supported)
29.2	149	\|=(% style="width: 160px;" %)HSW1\|(% style="width:282px" %)Beep frequency (Only valid in HMI V1.0 System)\|(% style="width:452px" %)Frequency range: 0~~4000
	150	\|=(% style="width: 160px;" %)HSW2\|(% style="width:282px" %)Beep volume (Only valid in HMI V1.0 System)\|(% style="width:452px" %)Volume range: 0~~80
1.1	151	\|=(% style="width: 160px;" %)HSW3\|(% style="width:282px" %)Beep time\|(% style="width:452px" %)Unit: ms
	152	\|=(% style="width: 160px;" %)HSW4\|(% style="width:282px" %)Beep whether enable or not\|(% style="width:452px" %)(((
	153	* =0: Enable.
	154	* =1: Disable.
	155	)))
	156	\|=(% style="width: 160px;" %)HSW5\|(% style="width:282px" %)(((
	157	Alarm indicator
	158	)))\|(% style="width:452px" %)(((
	159	* =0: Currently no alarm or all alarms have been off.
	160	* =1: Currently alarm(s) still keep in on.
	161	)))
	162	\|=(% style="width: 160px;" %)HSW6~~HSW7\|(% style="width:282px" %)Number of alarms\|(% style="width:452px" %)The number of alarm (it also includes the records of alarm confirmed)
	163	\|=(% style="width: 160px;" %)HSW8\|(% style="width:282px" %)Number of unconfirmed history alarm\|(% style="width:452px" %)The number of unconfirmed history alarm
28.1	164	\|=(% style="width: 160px;" %)HSW9\|(% style="width:282px" %)Time out prompt\|(% style="width:452px" %)(((
1.1	165	* =0: Enable
	166	* =1: Disable
	167	)))
	168	\|=(% style="width: 160px;" %)HSW12\|(% style="width:282px" %)Screen swicth\|(% style="width:452px" %)(((
	169	* = 0: Only HSW control the screen switch, and the sreens of all users will switch.
	170	* = 1: Only HUW control the screen switch, and all users do not affect each other.
	171	)))
	172	\|=(% style="width: 160px;" %)HSW13\|(% style="width:282px" %)Screen switch register\|(% style="width:452px" %)Equal to different values, the screen jumps to the corresponding screen number of the screen.
	173	\|=(% style="width: 160px;" %)HSW24\|(% style="width:282px" %)Reboot HMI\|=(% style="width: 452px;" %)1: Reboot
	174	\|=(% style="width: 160px;" %)HSW28\|(% style="width:282px" %)Local time: year\|(% style="width:452px" %)Range: 0~~9999 (system reserved)
	175	\|=(% style="width: 160px;" %)HSW29\|(% style="width:282px" %)Local time: month\|(% style="width:452px" %)Range: 01~~12 (system reserved)
	176	\|=(% style="width: 160px;" %)HSW30\|(% style="width:282px" %)Local time: day\|(% style="width:452px" %)Range: 01~~31 (system reserved)
	177	\|=(% style="width: 160px;" %)HSW31\|(% style="width:282px" %)Local time: hour\|(% style="width:452px" %)Range: 0~~23 (system reserved)
	178	\|=(% style="width: 160px;" %)HSW32\|(% style="width:282px" %)Local time: minute\|(% style="width:452px" %)Range: 0~~59 (system reserved)
	179	\|=(% style="width: 160px;" %)HSW33\|(% style="width:282px" %)Local time: second\|(% style="width:452px" %)Range: 0~~59 (system reserved)
	180	\|=(% style="width: 160px;" %)HSW34\|(% style="width:282px" %)Local time: week\|(% style="width:452px" %)(((
	181	* =0: Sunday.
	182	* =1: Monday.
	183	* =2: Tuesday.
	184	* =3: Wednesday.
	185	* =4: Thursday.
	186	* =5: Friday.
	187	* =6: Saturday.
	188	)))
29.3	189	\|=(% style="width: 160px;" %)HSW39\|(% style="width:282px" %)Beep type(Only valid in HMI V2.0 System)\|(% style="width:452px" %)Type range: 1-5, Default is 1.
1.1	190	\|=(% style="width: 160px;" %)HSW134\|(% style="width:282px" %)(((
	191	Whether the Script is read through
	192
	193
	194	)))\|(% style="width:452px" %)(((
	195	✎Note: If want to read-only or write-only, please enable this settings.
	196
	197	* =0: Read from HMI cache(Default)
	198	* =1: Read from PLC directly
	199	)))
	200	\|=(% style="width: 160px;" %)HSW135\|(% style="width:282px" %)Confirm installment password\|(% style="width:452px" %)Confirm button for installment password
	201	\|=(% style="width: 160px;" %)HSW151\|(% style="width:282px" %)Installment due\|(% style="width:452px" %)Number of days to installment due
	202	\|=(% style="width: 160px;" %)HSW185~~200\|(% style="width:282px" %)Installment password\|(% style="width:452px" %)Enter installment password
	203	\|=(% style="width: 160px;" %)HSW242\|(% style="width:282px" %)(((
	204	Prompt result of recipe operation
	205
	206	* Upload: Data is written from address to file
	207	* Download: Data is written from a file to an address
	208	)))\|(% style="width:452px" %)(((
	209	* =1: Download recipe, start
	210	* =2: Download recipe, execution error
	211	* =3: Download recipe, files don't exist
	212	* =4: Download recipe, members don't exist
	213	* =5: Download recipe, groups don't exist
	214	* =6: Download recipe, success
	215	* =7: Upload recipe, start
	216	* =8: Upload recipe, execution error
	217	* =9: Upload recipe, files don't exist
	218	* =10: Upload recipe, members don't exist
	219	* =11: Upload recipe, groups don't exist
	220	* =12: Upload recipe, success
	221	* =13: Insert recipe, start
	222	* =14: Insert recipe, execution error
	223	* =15: Insert recipe, files don't exist
	224	* =16: Insert recipe, members don't exist
	225	* =17: Insert recipe, groups don't exist
	226	* =18: Insert recipe, success
	227	* =19: Delete recipe, start
	228	* =20: Delete recipe, execution error
	229	* =21: Delete recipe, files don't exist
	230	* =22: Delete recipe, members don't exist
	231	* =23: Delete recipe, groups don't exist
	232	* =24: Delete recipe, success
	233	* =25: Delete and sort recipe, start
	234	* =26: Delete recipe and sort, execution error
	235	* =27: Delete recipe and sort, files don't exist
	236	* =28: Delete recipe and sort, members don't exist
	237	* =29: Delete recipe and sort, groups don't exist
	238	* =30: Delete recipe and sort, success
	239	* =37: CSV recipe files import successfully
	240	* =38: CSV recipe files import failed.
	241	)))
	242	\|=(% style="width: 160px;" %)HSW243\|(% style="width:282px" %)Prompt result of recipe index\|(% style="width:452px" %)(((
	243	* =31: Recipe index, start
	244	* =32: Recipe index, execution error
	245	* =33: Recipe index, files don't exist
	246	* =34: Recipe index, members don't exist
	247	* =35: Recipe index, groups don't exist
	248	* =36: Recipe index, success
	249	)))
	250	\|=(% style="width: 160px;" %)HSW521\|(% style="width:282px" %)Delete graph and alarm record\|(% style="width:452px" %)(((
	251	* =0: No operation
	252	* =1: HSX521.0=1, delete all records.
	253	* =2: HSX521.1=1, delete all trend graph.
	254	* =4: HSX521.2=1, delete all alarms.
	255	* =16: HSX521.4=1, delete history XY plot.
15.1	256	* =32: HSX521.5=1, delete data records in SD card or USB flash disk;(Please make a setting which is saved to USB flash disk or SD card in project setting).
	257	* =64: HSX521.6=1, delete alarms records in SD card or USB flash disk; (Please make a setting which is saved to USB flash disk or SD card in project setting).
1.1	258	)))
	259	\|=(% style="width: 160px;" %)HSW522\|(% style="width:282px" %)Copy and paste the alarm/data files in flash to the USB flash disk\|(% style="width:452px" %)(((
	260	* =0: No operation
	261	* =1: HSX522.0=1, copy all record
	262	* =2: HSX522.2=1, copy history XY trend graph
	263	* =8: HSX522.3=1, copy alarm record
	264	* =32: HSX522.5=1, copy recipe
	265	)))
	266	\|=(% style="width: 160px;" %)HSW523\|(% style="width:282px" %)Copy and paste the alarm/data files in flash to the SD card\|(% style="width:452px" %)(((
	267	* =0: No operation
	268	* =1: HSX523.0=1, copy all record
	269	* =4: HSX523.2=1, copy history XY trend graph
	270	* =8: HSX523.3=1, copy alarm record
	271	)))
	272	\|=(% style="width: 160px;" %)HSW524\|(% style="width:282px" %)Copy and paste the alarm/data files in SD card to the USB flash disk\|(% style="width:452px" %)(((
	273	* =0: no operation
	274	* =4: HSX524.2=1, copy history XY trend graph
	275	* =8: HSX524.3=1, copy alarm record
	276	* =16: HSX524.4=1, copy history alarm record
	277	* =32: HSX524.5=1, copy data record
	278	)))
	279	\|=(% style="width: 160px;" %)HSW525\|(% style="width:282px" %)Copy and paste the alarm/data files in USB flash disk to SD card\|(% style="width:452px" %)(((
	280	* =0: no operation
	281	* =4: HSX525.2=1, copy history XY trend graph
	282	* =8: HSX525.3=1, copy alarm record
	283	* =16: HSX525.4=1, copy history alarm record
	284	* =32: HSX525.5= 1, copy data record
	285	)))
	286	\|=(% style="width: 160px;" %)HSW526\|(% style="width:282px" %)Delete file list\|(% style="width:452px" %)(((
	287	* =0: no operation
	288	* =1: HSX526.0=1, delete designated file
	289	* =2: HSX526.1=1, delete all files
	290	)))
	291	\|=(% style="width: 160px;" %)HSW527\|(% style="width:282px" %)Eject USB flash disk/SD card\|(% style="width:452px" %)(((
	292	* =0: No operation
	293	* =1: Eject USB flash disk
	294	* =2: Eject SD card
	295	)))
	296	\|=(% style="width: 160px;" %)HSW528\|(% style="width:282px" %)The state of USB flash disk\|(% style="width:452px" %)(((
	297	* =1: USB flash disk is detected
	298	* =2: Ejecting USB flash disk, please waiting…
	299	* =3: USB flash disk ejected
	300	)))
	301	\|=(% style="width: 160px;" %)HSW529\|(% style="width:282px" %)The state of SD card\|(% style="width:452px" %)(((
	302	* =1: SD card is detected
	303	* =2: Ejecting SD card, please waiting…
	304	* =3: SD card ejected
	305	)))
	306	\|=(% style="width: 160px;" %)HSW550~~849\|(% style="width:282px" %)Communication control\|(% style="width:452px" %)For communication control and communication lamp (please refer to "[[communication control>>http://13.229.109.52:8080/wiki/pistudio/view/Helps/13.HMI%20internal%20registers/#HCommunicationcontrol]]" sector for detailed)
	307	\|=(% style="width: 160px;" %)HSW850\|(% style="width:282px" %)(((
	308	Network state
	309
	310	(4G, WIFI and Ethernet)
	311	)))\|(% style="width:452px" %)(((
	312	In HMI V1.0
	313
	314	* =0: Network is disconnected.
	315	* =1: only LAN connected, and APP can't access HMI.
	316	* =2: WECON Cloud connected , APP and web could access HMI.
	317
	318	In HMI V2.0
	319
	320	* =0: Network is disconnected.
	321	* =1: Network is connected.
	322	)))
	323	\|=(% style="width: 160px;" %)HSW855\|(% style="width:282px" %)Backlight Control\|(% style="width:452px" %)(((
	324	* HSX855.0=1: turn on the backlight and reset automatically after being triggered.
	325	* HSX855.1=1: turn off the backlight and reset automatically after being triggered.
	326	)))
	327	\|=(% style="width: 160px;" %)HSW856\|(% style="width:282px" %)Whether to close the indirect screen when the current screen is switched to the other screen)\|(% style="width:452px" %)(((
	328	* =0: close the sub-screen, including the indirect screen;
	329	* =1: not to close.
	330	)))
	331	\|=(% style="width: 160px;" %)HSW857\|(% style="width:282px" %)Permission in remote access (web page, mobile APP, cloud platform, etc.)\|(% style="width:452px" %)(((
	332	* =0: users could switch the screen, control the switch and update data in remote access.
	333	* =1: users could only control function switch (only switch the screen), view data and switch state, but could not operate or update them.
2.1	334	* =2: users could neither operate the screen switch, nor switch operation and data modification, only view. (The ig series and 8000/9000 series with -R after system upgrade)
1.1	335	)))
2.1	336	\|=(% style="width: 160px;" %)HSW860~~861\|(% style="width:282px" %)Data partition remaining space\|(% style="width:452px" %)Display the data partition remaining space, updated every minute, unit(kB)
	337	\|=(% style="width: 160px;" %)HSW880\|(% style="width:282px" %)Enable data partition remaining space\|(% style="width:452px" %)(((
	338	~=1, able to view the data partition remaining space from HSW860~~861.
	339
	340	~=Other value except 1, disable the viewing function.
	341	)))
1.1	342	\|=(% style="width: 160px;" %)HSW881\|(% style="width:282px" %)Storage of Record files\|(% style="width:452px" %)(((
	343	It is used for controlling saving alarm/data record files to U disk / SD card.
	344
	345	* = 0: Save to storage.
	346	* = 1: Don't save to storage.
	347	)))
	348	\|=(% style="width: 160px;" %)HSW882\|(% style="width:282px" %)Storage device status\|(% style="width:452px" %)(((
	349	* HDX882.0=0 USB flash doesn't execute storage or storage finished.
	350	* HDX882.0=1 USB flash is reading data, don't remove USB flash.
	351	* HDX882.1=0 SD card doesn't execute storage or storage finished.
	352	* HDX882.1=1 SD card is reading data, don't remove SD card.
	353	)))
4.2	354	\|=(% style="width: 160px;" %)HSW884\|(% style="width:282px" %)Enter the system network configuration interface\|(% style="width:452px" %)(((
	355	* =0: Do not enter the network configuration interface
	356	* =1: Enter the system network configuration interface.
4.3	357	** ig series HMI only supports to enter the system interface
4.2	358
1.1	359	)))
	360	\|=(% style="width: 160px;" %)HSW885\|(% style="width:282px" %)When the control object hides the address is read failed (communication failure), set the display mode of the object\|(% style="width:452px" %)(((
	361	* = 0: displayed by object setting.
	362	* =1: control address read failure, the address control of all objects is hidden, not displayed.
	363	* =2: control address read failure, the address control of all objects is displayed, not hidden.
	364	)))
	365	\|=(% style="width: 160px;" %)HSW893\|(% style="width:282px" %)(((
	366	User Permission Control Address, same as HUW1000 feature, please refer to chapter "[[User Permission>>http://13.229.109.52:8080/wiki/pistudio/view/Helps/08.Basic%20Function/#HUserPermission]]"
	367
	368	✎Note: This address can only take effect when it is operated in the real HMI, and the operation is invalid on Web/App side.
	369	)))\|(% style="width:452px" %)(((
	370	* =1: User Log in
	371	* =2: Change User password
	372	* =3: User Log out
	373	* =4: New user
	374	* =5: Delete user
	375	* =6: Add user rights
	376	* =8: Add Hide features
	377	* =9: Delete Profile
	378	* =10: Export Profile
	379	* =11: Import profile
	380	* =12: Export log file
	381	* =13: Delete log file
	382	)))
	383	\|=(% style="width: 160px;" %)HSW900\|(% style="width:282px" %)Quick update frequency settings for objects\|(% style="width:452px" %)(((
	384	Valid when the object is enabled for "quick update". Default: 5.
	385
	386	Range: 1 (fastest) ~~ 50 (slowest)
	387	)))
	388	\|=(% style="width: 160px;" %)HSW920\|(% style="width:282px" %)Static mode Maximum periods\|(% style="width:452px" %)Numeric Input/ Display (range: 0-12)
	389	\|=(% style="width: 160px;" %)HSW921 ~~ 924\|(% style="width:282px" %)Static mode Admin key\|(% style="width:452px" %)Character Input/ Display (length: 8)
	390	\|=(% style="width: 160px;" %)HSW925 ~~ 928\|(% style="width:282px" %)1^^st^^ period key (Static mode)\|(% style="width:452px" %)Character Input/ Display (length: 8)
	391	\|=(% style="width: 160px;" %)HSW929 ~~ 933\|(% style="width:282px" %)1^^st^^ expiry time (Static mode)\|(% style="width:452px" %)Numeric Input/ Display (YYYYMMDDHHMM)
	392	\|=(% style="width: 160px;" %)HSW935 ~~ 938\|(% style="width:282px" %)2^^nd^^ period key (Static mode)\|(% style="width:452px" %)Character Input/ Display (length: 8)
	393	\|=(% style="width: 160px;" %)HSW939 ~~ 943\|(% style="width:282px" %)2^^nd ^^expiry time (Static mode)\|(% style="width:452px" %)Numeric Input/ Display (YYYYMMDDHHMM)
	394	\|=(% style="width: 160px;" %)HSW945 ~~ 948\|(% style="width:282px" %)3^^rd^^ period key (Static mode)\|(% style="width:452px" %)Character Input/ Display (length: 8)
	395	\|=(% style="width: 160px;" %)HSW949 ~~ 953\|(% style="width:282px" %)3^^rd ^^expiry time (Static mode)\|(% style="width:452px" %)Numeric Input/ Display (YYYYMMDDHHMM)
	396	\|=(% style="width: 160px;" %)HSW955 ~~ 958\|(% style="width:282px" %)4^^th^^ period key (Static mode)\|(% style="width:452px" %)Character Input/ Display (length: 8)
	397	\|=(% style="width: 160px;" %)HSW959 ~~ 963\|(% style="width:282px" %)4^^th ^^expiry time (Static mode)\|(% style="width:452px" %)Numeric Input/ Display (YYYYMMDDHHMM)
	398	\|=(% style="width: 160px;" %)HSW965 ~~ 968\|(% style="width:282px" %)5^^th^^ period key (Static mode)\|(% style="width:452px" %)Character Input/ Display (length: 8)
	399	\|=(% style="width: 160px;" %)HSW969 ~~ 973\|(% style="width:282px" %)5^^th ^^expiry time (Static mode)\|(% style="width:452px" %)Numeric Input/ Display (YYYYMMDDHHMM)
	400	\|=(% style="width: 160px;" %)HSW975 ~~ 978\|(% style="width:282px" %)6^^th^^ period key (Static mode)\|(% style="width:452px" %)Character Input/ Display (length: 8)
	401	\|=(% style="width: 160px;" %)HSW979 ~~ 983\|(% style="width:282px" %)6^^th ^^expiry time (Static mode)\|(% style="width:452px" %)Numeric Input/ Display (YYYYMMDDHHMM)
	402	\|=(% style="width: 160px;" %)HSW985 ~~ 988\|(% style="width:282px" %)7^^th^^ period key (Static mode)\|(% style="width:452px" %)Character Input/ Display (length: 8)
	403	\|=(% style="width: 160px;" %)HSW989 ~~ 993\|(% style="width:282px" %)7^^th ^^expiry time (Static mode)\|(% style="width:452px" %)Numeric Input/ Display (YYYYMMDDHHMM)
	404	\|=(% style="width: 160px;" %)HSW995 ~~ 998\|(% style="width:282px" %)8^^th^^ period key (Static mode)\|(% style="width:452px" %)Character Input/ Display (length: 8)
	405	\|=(% style="width: 160px;" %)HSW999 ~~ 1003\|(% style="width:282px" %)8^^th ^^expiry time (Static mode)\|(% style="width:452px" %)Numeric Input/ Display (YYYYMMDDHHMM)
	406	\|=(% style="width: 160px;" %)HSW1005 ~~1008\|(% style="width:282px" %)9^^th^^ period key (Static mode)\|(% style="width:452px" %)Character Input/ Display (length: 8)
	407	\|=(% style="width: 160px;" %)HSW1009 ~~ 1013\|(% style="width:282px" %)9^^th ^^expiry time (Static mode)\|(% style="width:452px" %)Numeric Input/ Display (YYYYMMDDHHMM)
	408	\|=(% style="width: 160px;" %)HSW1015 ~~1018\|(% style="width:282px" %)10^^th^^ period key (Static mode)\|(% style="width:452px" %)Character Input/ Display (length: 8)
	409	\|=(% style="width: 160px;" %)HSW1019 ~~ 1023\|(% style="width:282px" %)10^^th ^^expiry time (Static mode)\|(% style="width:452px" %)Numeric Input/ Display (YYYYMMDDHHMM)
	410	\|=(% style="width: 160px;" %)HSW1025 ~~1028\|(% style="width:282px" %)11^^th^^ period key (Static mode)\|(% style="width:452px" %)Character Input/ Display (length: 8)
	411	\|=(% style="width: 160px;" %)HSW1029 ~~ 1033\|(% style="width:282px" %)11^^th ^^expiry time (Static mode)\|(% style="width:452px" %)Numeric Input/ Display (YYYYMMDDHHMM)
	412	\|=(% style="width: 160px;" %)HSW1035 ~~1038\|(% style="width:282px" %)12^^th^^ period key (Static mode)\|(% style="width:452px" %)Character Input/ Display (length: 8)
	413	\|=(% style="width: 160px;" %)HSW1039 ~~ 1043\|(% style="width:282px" %)12^^th ^^expiry time (Static mode)\|(% style="width:452px" %)Numeric Input/ Display (YYYYMMDDHHMM)
	414	\|=(% style="width: 160px;" %)HSW1046\|(% style="width:282px" %)Current period (Static mode)\|(% style="width:452px" %)Current period (Range 1-13)
	415	\|=(% style="width: 160px;" %)HSW1047\|(% style="width:282px" %)Save settings (Static mode)\|(% style="width:452px" %)(((
	416	* HSX1047.0=1: Save static installment information
	417	* HSX1047.1=1: Write installment information to registers
	418	)))
	419	\|=(% style="width: 160px;" %)HSW1050~~HSW1065\|(% style="width:282px" %)The recipe name that can input csv format\|(% style="width:452px" %)Input CSV format recipe file name through "Character Input/ Display".(This function should be used in combination with the recipefunction)
	420	\|=(% style="width: 160px;" %)HSW1066\|(% style="width:282px" %)Configure the type of the CSV file imported\|(% style="width:452px" %)(((
	421	The CSV file type imported (This function should be used in combination with the recipe function)
	422
	423	* =0: Import customed CSV file. The data in the file is valid.
	424	* =1: Import ordinary recipe files of regular series HMI. The 1st row of the file is invalid.
	425	* =2: Import special recipe files of regular series HMI. The 1st and 3nd rows and the 1st colume of the file is invalid.
	426	)))
	427	\|=(% style="width: 160px;" %)HSW1067\|(% style="width:282px" %)Location where the CSV file is saved\|(% style="width:452px" %)(((
	428	Set the path of CSV file (This function should be used in combination with the recipe function)
	429
	430	* =0: In the CsvFile directory of the USB stick
	431	* =1: In the CsvFile directory of the SD card
	432	)))
	433	\|=(% style="width: 160px;" %)HSW1070\|(% style="width:282px" %)The time interval (seconds) since the last time the screen was clicked\|(% style="width:452px" %)(((
	434	Shows how long the current screen has not been clicked, using a decimal unsigned double word (Numeric Input/ Display).
	435
	436	✎Note: This register is cleared to zero regardless of which user clicks on the screen.
	437	)))
	438	\|=(% style="width: 160px;" %)HSW1073\|(% style="width:282px" %)Corresponding key value from keyboard\|(% style="width:452px" %)Display the key value of the currently pressed key, the key value is shown in Table 1 (not updated when the character input display is being input)
	439	\|=(% style="width: 160px;" %)HSW1074\|(% style="width:282px" %)Keyboard key status\|(% style="width:452px" %)Display the current button status (not updated when the numeric input display is being input)(((
	440	* =0: key release
	441	* =1: key press
	442	* =2: Long press the button
	443	)))
	444	\|=(% style="width: 160px;" %)HSW1075\|(% style="width:282px" %)Cursor speed\|(% style="width:452px" %)Control the cursor movement speed, the range is 0～100, the default is 20
	445	\|=(% style="width: 160px;" %)HSW1076\|(% style="width:282px" %)Cursor x coordinate value\|(% style="width:452px" %)Record the x value at the current position of the cursor, range: 0 to screen width -1
	446	\|=(% style="width: 160px;" %)HSW1077\|(% style="width:282px" %)Cursor y coordinate value\|(% style="width:452px" %)Record the y value at the current position of the cursor, range: 0 to screen height-1
	447	\|=(% style="width: 160px;" %)HSW1078\|(% style="width:282px" %)Corresponding ASCII code for keyboard keys\|(% style="width:452px" %)Only the ASCII value of letters, numbers, and symbols are displayed, and the ASCII value of the function button is not displayed.
	448	\|=(% style="width: 160px;" %)HSW1079\|(% style="width:282px" %)Trigger to set the cursor position and set the Enter key mode\|(% style="width:452px" %)(((
	449	* HSX1079.0=1: Set the cursor position according to the cursor xy register value;
	450	* HSX1079.1=0: When the numeric/character input display is being input, press Enter to end the input, no value/text part is being input, Enter is a normal click;
	451	* HSX1079.1=1 Regardless of whether the numeric/character component is inputting the Enter key, only normal click is performed, and the keyboard end input is not performed.
	452	)))
	453	\|=(% style="width: 160px;" %)HSW1083\|(% style="width:282px" %)Naming method for printing object screenshots\|(% style="width:452px" %)(((
	454	Example: The time is 2019-01-04 14:29:10 (523 milliseconds), the screen number is 0, and the object ID is 2.
	455
	456	* =0: Use year, month, day, hour, minute, second, millisecond, screen number, part number to name, such as: 2019010414291052302.bmp.
	457	* =1: Name using year, month, day, hour, minute, and second.
	458
	459	For example: 20190104142910.bmp.
	460	)))
	461	\|=(% style="width: 160px;" %)HSW1086\|(% style="width:282px" %)Control address mapping polling cycle, unit: ms\|(% style="width:452px" %)(((
	462	Address mapping polling cycle, effective range: 40~~1000ms, default: 300ms.
	463
	464	* When the set value is greater than 1000, the value is 1000.
28.1	465	* When the set value is lower than 40, it changes to the default value 300
1.1	466	)))
	467	\|=(% style="width: 160px;" %)HSW1087\|(% style="width:282px" %)Control write interval in address mapping\|(% style="width:452px" %)(((
	468	After reading data to the device for N times, Perform an address mapping write operation. N is the interval value. The effective range: 0~~5, and default is 2.
	469
	470	When N more than 5, it is 5.
	471
	472	0 is the fastest and 5 is the slowest.
	473	)))
	474	\|=(% style="width: 160px;" %)HSW1088\|(% style="width:282px" %)Control the write interval of script\|(% style="width:452px" %)(((
	475	After reading data to the device for N times, Perform a script write operation. N is the interval value. The effective range: 0~~5, and default is 2.
	476
	477	When N more than 5, it is 5.
	478
	479	0 is the fastest and 5 is the slowest.
	480	)))
	481	\|=(% style="width: 160px;" %)HSW1089\|(% style="width:282px" %)Control interval of read through\|(% style="width:452px" %)(((
	482	After reading data to the device for N times, Perform a read through operation. N is the interval value. The effective range: 0~~5, and default is 2.
	483
	484	When N more than 5, it is 5.
	485
	486	0 is the fastest and 5 is the slowest.
	487	)))
	488	\|=(% style="width: 160px;" %)HSW1100\|(% colspan="1" rowspan="4" style="width:282px" %)Set the Master IP for Multi-link\|(% style="width:452px" %)High word 1 for Master IP address of multi-link
	489	\|=(% style="width: 160px;" %)HSW1101\|(% style="width:452px" %)High word 2 for Master IP address of multi-link
	490	\|=(% style="width: 160px;" %)HSW1102\|(% style="width:452px" %)High word 3 for Master IP address of multi-link
	491	\|=(% style="width: 160px;" %)HSW1103\|(% style="width:452px" %)High word 4 for Master IP address of multi-link
	492	\|=(% style="width: 160px;" %)HSW1104\|(% style="width:282px" %)Control connection to Master or not for Multi-link slave device\|(% style="width:452px" %)(((
	493	* =1: Connect to the Master
	494	* =0: Do not connect to Master
	495	)))
	496	\|=(% style="width: 160px;" %)HSW1141\|(% style="width:282px" %)Release alarm\|(% style="width:452px" %)(((
	497	* =0, Default value
	498	* =1, Release the alarm generated before the last power-down when starting up
	499	)))
16.1	500	\|=(% style="width: 160px;" %)HSW1200\|(% colspan="1" rowspan="2" style="width:282px" %)TSAP settings for HMI in the Siemens LOGO! 8 protocol(ig series or HMI V2.0)\|(% style="width:452px" %)HMI local TSAP, which corresponds to the remote TSAP of PLC
	501	\|=(% style="width: 160px;" %)HSW1201\|(% style="width:452px" %)HMI remote TSAP, which corresponds to the local TSAP of PLC
1.1	502	\|=(% style="width: 160px;" %)HSW1450\|(% style="width:282px" %)Enable objects level password function\|(% style="width:452px" %)(((
	503	* =0, Disable
	504	* =1, Enable
	505	)))
	506	\|=(% style="width: 160px;" %)HSW1451\|(% style="width:282px" %)Whether the object level passwords are independent of each other\|(% style="width:452px" %)(((
	507	* =0, No, high-level passwords can unlock low-level
	508	* = 1, Yes, high-level passwords cannot unlock low-level
	509	)))
	510	\|=(% style="width: 160px;" %)HSW1452\|(% style="width:282px" %)Initialization level\|(% style="width:452px" %)Initialization level while HMI running
	511	\|=(% style="width: 160px;" %)HSW1454~~1457\|(% style="width:282px" %)Password for Level 1\|(% style="width:452px" %)(((
	512	Display password for level 1, using character input object, up to 8 characters (numbers, letters (case sensitive))
	513	)))
	514	\|=(% style="width: 160px;" %)HSW1458~~1461\|(% style="width:282px" %)Password for Level 2\|(% style="width:452px" %)Display password for level 2, using character input object, up to 8 characters (numbers, letters (case sensitive))
	515	\|=(% style="width: 160px;" %)HSW1462~~1465\|(% style="width:282px" %)Password for Level 3\|(% style="width:452px" %)Display password for level 3, using character input object, up to 8 characters (numbers, letters (case sensitive))
	516	\|=(% style="width: 160px;" %)HSW1466~~1469\|(% style="width:282px" %)Password for Level 4\|(% style="width:452px" %)Display password for level 4, using character input object, up to 8 characters (numbers, letters (case sensitive))
	517	\|=(% style="width: 160px;" %)HSW1470~~1473\|(% style="width:282px" %)Password for Level 5\|(% style="width:452px" %)Display password for level 5, using character input object, up to 8 characters (numbers, letters (case sensitive))
	518	\|=(% style="width: 160px;" %)HSW1474~~1477\|(% style="width:282px" %)Password for Level 6\|(% style="width:452px" %)Display password for level 6, using character input object, up to 8 characters (numbers, letters (case sensitive))
	519	\|=(% style="width: 160px;" %)HSW1478~~1481\|(% style="width:282px" %)Password for Level 7\|(% style="width:452px" %)Display password for level 7, using character input object, up to 8 characters (numbers, letters (case sensitive))
	520	\|=(% style="width: 160px;" %)HSW1482~~1485\|(% style="width:282px" %)Password for Level 8\|(% style="width:452px" %)Display password for level 8, using character input object, up to 8 characters (numbers, letters (case sensitive))
	521	\|=(% style="width: 160px;" %)HSW1486~~1489\|(% style="width:282px" %)Password for Level 9\|(% style="width:452px" %)Display password for level 9, using character input object, up to 8 characters (numbers, letters (case sensitive))
	522	\|=(% style="width: 160px;" %)HSW1490~~1493\|(% style="width:282px" %)Password for Level 10\|(% style="width:452px" %)Display password for level 10, using character input object, up to 8 characters (numbers, letters (case sensitive))
	523	\|=(% style="width: 160px;" %)HSW1494~~1497\|(% style="width:282px" %)Password for Level 11\|(% style="width:452px" %)Display password for level 11, using character input object, up to 8 characters (numbers, letters (case sensitive))
	524	\|=(% style="width: 160px;" %)HSW1498~~1501\|(% style="width:282px" %)Password for Level 12\|(% style="width:452px" %)Display password for level 12, using character input object, up to 8 characters (numbers, letters (case sensitive))
	525	\|=(% style="width: 160px;" %)HSW1502\|(% style="width:282px" %)Modify password for object level\|(% style="width:452px" %)(((
	526	* HSX1502.0=1: Modification comfirmed. Save the data of HSW1450~~HSW1501 to a file for immediate effect.
	527	* HSX1502.1=1:Modification cancelled. Restore the current data of hSW1450-HSW1501 to the data saved in the file last time.
	528	)))
4.3	529	\|=(% style="width: 160px;" %)HSW1509\|(% style="width:282px" %)Curve width\|(% style="width:452px" %)(((
	530	* =0: Use the curve width set by project default.
	531	* =1 to 10: use special register to set curve width.
	532	)))
1.1	533	\|=(% style="width: 160px;" %)HSW1603\|(% style="width:282px" %)Number of current unreleased alarms\|(% style="width:452px" %)The number of current unreleased alarms in alarm record file.
	534	\|=(% style="width: 160px;" %)HSW1604\|(% style="width:282px" %)The auxiliary judgment address when the control bit in the Object Lock fails to be read\|(% style="width:452px" %)(((
	535	* =0: The auxiliary address is invalid.
	536	* =1: When the communication fails, lock the object.
	537	* =2: When the communication fails, unlock the object.
	538	* =Others: The auxiliary address is invalid.
	539	)))
	540	\|=(% style="width: 160px;" %)HSW1605\|(% style="width:282px" %)BCD format natural decimal control\|(% style="width:452px" %)(((
	541	Whether to display natural decimals with decimal point in BCD format:
	542
	543	* 0=Not enabled.
	544	* 1=Enable.
	545
	546	(For example, 56.20 is displayed as 56.2, 33.00 is displayed as 33)
	547	)))
	548	\|=(% style="width: 160px;" %)HSW1606\|(% style="width:282px" %)User permission modification control\|(% style="width:452px" %)(((
	549	* =0: Ordinary users are allowed to modify permissions and other operations
	550	* =1: Only the administrator can operate (default is 0)
	551	)))
	552	\|=(% style="width: 160px;" %)HSW1607\|(% style="width:282px" %)The spacing value among the drop-down items of the drop-down list\|(% style="width:452px" %)10 to 50 is effective, such as: 23 is 2.3 times the height of the object.
	553	\|=(% style="width: 160px;" %)HSW1611\|(% style="width:282px" %)(((
	554	Traditional recipe transfer
	555	)))\|(% style="width:452px" %)(((
	556	* =1: download traditional recipe.
	557	* =2: upload the traditional recipe.
	558	)))
	559	\|=(% style="width: 160px;" %)HSW1612\|(% style="width:282px" %)Traditional Recipe group number\|(% style="width:452px" %)Traditional Recipe group number
	560	\|=(% style="width: 160px;" %)HSW1613\|(% style="width:282px" %)Display the status of network card\|(% style="width:452px" %)(((
	561	* =1: Normal
	562	* =Others: Abnormal
	563	)))
	564	\|=(% style="width: 160px;" %)HSW1614~~1623\|(% style="width:282px" %)Download speed per second\|(% style="width:452px" %)Display the download speed per second. (The value is string)
	565	\|=(% style="width: 160px;" %)HSW1624~~1633\|(% style="width:282px" %)Upnload speed per second\|(% style="width:452px" %)Display the upload speed per second. (The value is string)
	566	\|=(% style="width: 160px;" %)HSW1634~~1643\|(% style="width:282px" %)Flow consumption rate\|(% style="width:452px" %)Display the total flow rate per second (The value is string)
	567	\|=(% style="width: 160px;" %)HSW1644~~1653\|(% style="width:282px" %)Download flow consumption after power on\|(% style="width:452px" %)Display the download flow consumption after power on (The value is string)
	568	\|=(% style="width: 160px;" %)HSW1654~~1663\|(% style="width:282px" %)Upload flow consumption after power on\|(% style="width:452px" %)Display the upload flow consumption after power on (The value is string)
	569	\|=(% style="width: 160px;" %)HSW1664~~1673\|(% style="width:282px" %)Total flow consumption after power on\|(% style="width:452px" %)Display the total flow consumption after power on (download and upload). (The value is string)
	570	\|=(% style="width: 160px;" %)HSW1674~~1683\|(% style="width:282px" %)Historical flow consumption\|(% style="width:452px" %)Display historical flow consumption (download and upload). (The value is string)
	571	\|=(% style="width: 160px;" %)HSW1684~~1693\|(% style="width:282px" %)Flow consumption in 10 minutes\|(% style="width:452px" %)Flow consumption in 10 minutes (download and upload). (The value is string)
	572	\|=(% style="width: 160px;" %)HSW1694~~1703\|(% style="width:282px" %)Flow consumption in 30 minutes\|(% style="width:452px" %)Flow consumption in 30 minutes (download and upload). (The value is string)
	573	\|=(% style="width: 160px;" %)HSW1704~~1713\|(% style="width:282px" %)Flow consumption in 3 hours\|(% style="width:452px" %)Flow consumption in 3 hours (download and upload). (The value is string)
	574	\|=(% style="width: 160px;" %)HSW1715\|(% style="width:282px" %)Reset flow\|(% style="width:452px" %)(((
	575	* =1: Clear historical flow data and restart the count.
	576	* =Others: Invalid
	577	)))
	578	\|=(% style="width: 160px;" %)HSW1719\|(% style="width:282px" %)Network status of Ethernet connnecting to server\|(% style="width:452px" %)(((
	579	* =0: Server connection exception
	580	* =1: Server connection is OK
	581	)))
	582	\|=(% style="width: 160px;" %)HSW1720\|(% colspan="1" rowspan="12" style="width:282px" %)Related IP register in WIFI network status (It is valid when HMI is connected to WIFI)\|(% style="width:452px" %)Local IP address high byte 1
	583	\|=(% style="width: 160px;" %)HSW1721\|(% style="width:452px" %)Local IP address high byte 2
	584	\|=(% style="width: 160px;" %)HSW1722\|(% style="width:452px" %)Local IP address high byte 3
	585	\|=(% style="width: 160px;" %)HSW1723\|(% style="width:452px" %)Local IP address high byte 4
	586	\|=(% style="width: 160px;" %)HSW1724\|(% style="width:452px" %)Local mask IP address high byte 1
	587	\|=(% style="width: 160px;" %)HSW1725\|(% style="width:452px" %)Local mask IP address high byte 2
	588	\|=(% style="width: 160px;" %)HSW1726\|(% style="width:452px" %)Local mask IP address high byte 3
	589	\|=(% style="width: 160px;" %)HSW1727\|(% style="width:452px" %)Local mask IP address high byte 4
	590	\|=(% style="width: 160px;" %)HSW1728\|(% style="width:452px" %)Local gateway IP address high byte 1
	591	\|=(% style="width: 160px;" %)HSW1729\|(% style="width:452px" %)Local gateway IP address high byte 2
	592	\|=(% style="width: 160px;" %)HSW1730\|(% style="width:452px" %)Local gateway IP address high byte 3
	593	\|=(% style="width: 160px;" %)HSW1731\|(% style="width:452px" %)Local gateway IP address high byte 4
	594	\|=(% style="width: 160px;" %)HSW1733\|(% colspan="1" rowspan="6" style="width:282px" %)(((
	595	Display the MAC code of current WIFI
	596
	597	(display in hexadecimal)
	598	)))\|(% style="width:452px" %)Local MAC address high byte 1 (hexadecimal)
	599	\|=(% style="width: 160px;" %)HSW1734\|(% style="width:452px" %)Local MAC address high byte 2 (hexadecimal)
	600	\|=(% style="width: 160px;" %)HSW1735\|(% style="width:452px" %)Local MAC address high byte 3 (hexadecimal)
	601	\|=(% style="width: 160px;" %)HSW1736\|(% style="width:452px" %)Local MAC address high byte 4 (hexadecimal)
	602	\|=(% style="width: 160px;" %)HSW1737\|(% style="width:452px" %)Local MAC address high byte 5 (hexadecimal)
	603	\|=(% style="width: 160px;" %)HSW1738\|(% style="width:452px" %)Local MAC address high byte 6 (hexadecimal)
	604	\|=(% style="width: 160px;" %)HSW1739\|(% style="width:282px" %)Display the network status of WIFI\|(% style="width:452px" %)(((
	605	* =0: Server connection exception
	606	* =1: Server connection is OK
	607	)))
17.1	608	\|=(% style="width: 160px;" %)HSW1740\|(% style="width:282px" %)Wi-fi signal strength\|(% style="width:452px" %)(((
16.2	609	Display the value of Wi-fi signal signal strength, ranges from 0~~100 (Signal strength is automatically obtained only once when HMI is powered on, and it will not be automatically updated. It needs to be used with the HSW1890)
	610	)))
1.1	611	\|=(% style="width: 160px;" %)HSW1741\|(% colspan="1" rowspan="12" style="width:282px" %)Related IP register in 4Gnetwork status (It is valid when HMI is connected to 4G)\|(% style="width:452px" %)Local IP address high byte 1
	612	\|=(% style="width: 160px;" %)HSW1742\|(% style="width:452px" %)Local IP address high byte 2
	613	\|=(% style="width: 160px;" %)HSW1743\|(% style="width:452px" %)Local IP address high byte 3
	614	\|=(% style="width: 160px;" %)HSW1744\|(% style="width:452px" %)Local IP address high byte 4
	615	\|=(% style="width: 160px;" %)HSW1745\|(% style="width:452px" %)Local mask IP address high byte 1
	616	\|=(% style="width: 160px;" %)HSW1746\|(% style="width:452px" %)Local mask IP address high byte 2
	617	\|=(% style="width: 160px;" %)HSW1747\|(% style="width:452px" %)Local mask IP address high byte 3
	618	\|=(% style="width: 160px;" %)HSW1748\|(% style="width:452px" %)Local mask IP address high byte 4
	619	\|=(% style="width: 160px;" %)HSW1749\|(% style="width:452px" %)Local gateway IP address high byte 1
	620	\|=(% style="width: 160px;" %)HSW1750\|(% style="width:452px" %)Local gateway IP address high byte 2
	621	\|=(% style="width: 160px;" %)HSW1751\|(% style="width:452px" %)Local gateway IP address high byte 3
	622	\|=(% style="width: 160px;" %)HSW1752\|(% style="width:452px" %)Local gateway IP address high byte 4
	623	\|=(% style="width: 160px;" %)HSW1754\|(% colspan="1" rowspan="6" style="width:282px" %)(((
	624	Display the MAC code of current WIFI
	625
	626	(display in hexadecimal)
	627	)))\|(% style="width:452px" %)Local MAC address high byte 1 (hexadecimal)
	628	\|=(% style="width: 160px;" %)HSW1755\|(% style="width:452px" %)Local MAC address high byte 2 (hexadecimal)
	629	\|=(% style="width: 160px;" %)HSW1756\|(% style="width:452px" %)Local MAC address high byte 3 (hexadecimal)
	630	\|=(% style="width: 160px;" %)HSW1757\|(% style="width:452px" %)Local MAC address high byte 4 (hexadecimal)
	631	\|=(% style="width: 160px;" %)HSW1758\|(% style="width:452px" %)Local MAC address high byte 5 (hexadecimal)
	632	\|=(% style="width: 160px;" %)HSW1759\|(% style="width:452px" %)Local MAC address high byte 6 (hexadecimal)
	633	\|=(% style="width: 160px;" %)HSW1760\|(% style="width:282px" %)Display 4G network status\|(% style="width:452px" %)(((
	634	* =0: Server connection exception
	635	* =1: Server connection is OK
	636	)))
	637	\|=(% style="width: 160px;" %)HSW1761\|(% style="width:282px" %)Display 4G network signal strength\|(% style="width:452px" %)Signal strength: 0~~31. The greater the value ,the signal is stronger
12.1	638	\|=(% style="width: 160px;" %)(((
	639	HSW1762
	640	)))\|(% colspan="1" rowspan="13" style="width:282px" %)(((
	641	Note: Valid when Ethernet2 of HMI is plugged into the network cable.
	642	①、When the Ethernet setting is enabled in the project parameters, this register displays the set value.
	643	②. When the Ethernet setting is not enabled in the engineering parameters, the register displays the Ethernet IP automatically acquired by the HMI.
	644	③. When the HMI is not plugged into the network cable, the register will show 0 whether the engineering parameters are set or not.
	645	④.IP related registers can be read and written (only static IP mode can be written).
	646	)))\|(% style="width:452px" %)(((
	647	Ethernet2 Local IP address high byte 1
	648	)))
	649	\|=(% style="width: 160px;" %)(((
	650	HSW1763
	651	)))\|(% style="width:452px" %)(((
	652	Ethernet2 Local IP address high byte 2
	653	)))
	654	\|=(% style="width: 160px;" %)(((
	655	HSW1764
	656	)))\|(% style="width:452px" %)(((
	657	Ethernet2 Local IP address high byte 3
	658	)))
	659	\|=(% style="width: 160px;" %)(((
	660	HSW1765
	661	)))\|(% style="width:452px" %)(((
	662	Ethernet2 Local IP address high byte 4
	663	)))
	664	\|=(% style="width: 160px;" %)(((
	665	HSW1766
	666	)))\|(% style="width:452px" %)(((
	667	Ethernet2 Local mask IP address high byte 1
	668	)))
	669	\|=(% style="width: 160px;" %)(((
	670	HSW1767
	671	)))\|(% style="width:452px" %)(((
	672	Ethernet2 Local mask IP address high byte 2
	673	)))
	674	\|=(% style="width: 160px;" %)(((
	675	HSW1768
	676	)))\|(% style="width:452px" %)Ethernet2 Local mask IP address high byte 3
	677	\|=(% style="width: 160px;" %)HSW1769\|(% style="width:452px" %)Ethernet2 Local mask IP address high byte 4
	678	\|=(% style="width: 160px;" %)(((
	679	HSW1770
	680	)))\|(% style="width:452px" %)(((
	681	Ethernet2 Local gateway IP address high byte 1
	682	)))
	683	\|=(% style="width: 160px;" %)(((
	684	HSW1771
	685	)))\|(% style="width:452px" %)(((
	686	Ethernet2 Local gateway IP address high byte 2
	687	)))
	688	\|=(% style="width: 160px;" %)(((
	689	HSW1772
	690	)))\|(% style="width:452px" %)(((
	691	Ethernet2 Local gateway IP address high byte 3
	692	)))
	693	\|=(% style="width: 160px;" %)(((
	694	HSW1773
	695	)))\|(% style="width:452px" %)(((
	696	Ethernet2 Local gateway IP address high byte 4
	697	)))
	698	\|=(% style="width: 160px;" %)(((
	699	HSW1774
	700	)))\|(% style="width:452px" %)(((
	701	Ethernet2 Local Port Address
	702	)))
	703	\|=(% style="width: 160px;" %)(((
	704	HSW1775
	705	)))\|(% colspan="1" rowspan="6" style="width:282px" %)(((
	706	①Display the MAC code of Ethernet2 NIC
	707
	708	(hexadecimal display)
	709
	710	②Read-only mode, not modifiable
	711	)))\|(% style="width:452px" %)(((
	712	Ethernet2 Local MAC code high byte 1
	713	)))
	714	\|=(% style="width: 160px;" %)(((
	715	HSW1776
	716	)))\|(% style="width:452px" %)(((
	717	Ethernet2 Local MAC code high byte 2
	718	)))
	719	\|=(% style="width: 160px;" %)(((
	720	HSW1777
	721	)))\|(% style="width:452px" %)(((
	722	Ethernet2 Local MAC code high byte 3
	723	)))
	724	\|=(% style="width: 160px;" %)(((
	725	HSW1778
	726	)))\|(% style="width:452px" %)(((
	727	Ethernet2 Local MAC code high byte 4
	728	)))
	729	\|=(% style="width: 160px;" %)(((
	730	HSW1779
	731	)))\|(% style="width:452px" %)(((
	732	Ethernet2 Local MAC code high byte 5
	733	)))
	734	\|=(% style="width: 160px;" %)(((
	735	HSW1780
	736	)))\|(% style="width:452px" %)(((
	737	Ethernet2 Local MAC code high byte 6
	738	)))
	739	\|=(% style="width: 160px;" %)(((
	740	HSW1781
	741	)))\|(% colspan="1" rowspan="8" style="width:282px" %)(((
	742	①Display and modify DNS1 and DNS2 of Ethernet2
	743
	744	②Related registers can be read and written mode (only static IP mode can be written)
	745	)))\|(% style="width:452px" %)(((
	746	Ethernet2 Local DNS1 address high byte 1
	747	)))
	748	\|=(% style="width: 160px;" %)(((
	749	HSW1782
	750	)))\|(% style="width:452px" %)(((
	751	Ethernet2 Local DNS1 address high byte 2
	752	)))
	753	\|=(% style="width: 160px;" %)(((
	754	HSW1783
	755	)))\|(% style="width:452px" %)(((
	756	Ethernet2 Local DNS1 address high byte 3
	757	)))
	758	\|=(% style="width: 160px;" %)(((
	759	HSW1784
	760	)))\|(% style="width:452px" %)(((
	761	Ethernet2 Local DNS1 address high byte 4
	762	)))
	763	\|=(% style="width: 160px;" %)(((
	764	HSW1785
	765	)))\|(% style="width:452px" %)(((
	766	Ethernet2 Local DNS2 address high byte 1
	767	)))
	768	\|=(% style="width: 160px;" %)(((
	769	HSW1786
	770	)))\|(% style="width:452px" %)(((
	771	Ethernet2 Local DNS2 address high byte 2
	772	)))
	773	\|=(% style="width: 160px;" %)(((
	774	HSW1787
	775	)))\|(% style="width:452px" %)(((
	776	Ethernet2 Local DNS2 address high byte 3
	777	)))
	778	\|=(% style="width: 160px;" %)(((
	779	HSW1788
	780	)))\|(% style="width:452px" %)(((
	781	Ethernet2 Local DNS2 address high byte 4
	782	)))
	783	\|=(% style="width: 160px;" %)(((
	784	HSW1789
	785	)))\|(% colspan="1" style="width:282px" %)(((
	786	Display or set the dynamic or static IP mode of Ethernet2
	787	)))\|(% style="width:452px" %)(((
	788	HSX1789.0 = 0, Static IP mode
	789
	790	HSX1789.0 = 1, dynamic IP mode
	791	)))
	792	\|=(% style="width: 160px;" %)(((
	793	HSW1790
	794	)))\|(% colspan="1" style="width:282px" %)(((
	795	Confirm Ethernet2 IP, subnet mask, gateway, DNS1, DNS2, and dynamic static IP settings
	796	)))\|(% style="width:452px" %)(((
	797	~= 1, confirm the setting (i.e., after modifying IP-related information, set this address to 1, representing confirmation of the modification, after which it will be reset to 0)
	798	)))
	799	\|=(% style="width: 160px;" %)(((
	800	HSW1791
	801	)))\|(% colspan="1" style="width:282px" %)(((
	802	Network status of the Ethernet2 connection server
	803	)))\|(% style="width:452px" %)(((
	804	~= 0, connection to the server is abnormal = 1, connection to the server is normal
	805	)))
1.1	806	\|=(% style="width: 160px;" %)HSW1852\|(% style="width:282px" %)Control the interval in two consecutive clicks\|(% style="width:452px" %)Limit range: 1~~500ms. The default is 100 ms.
	807	\|=(% style="width: 160px;" %)HSW1853\|(% style="width:282px" %)File format for exporting data records to USB flash drive or SD card\|(% style="width:452px" %)(((
	808	* =0: db database
	809	* =1: CSV
16.3	810
	811	(Only valid for script function DbToCsvFile)
1.1	812	)))
	813	\|=(% style="width: 160px;" %)HSW1854\|(% style="width:282px" %)High and low word conversion type\|(% style="width:452px" %)(((
	814	* =0: use the old high-low word conversion (default)
	815	* =1: usie the new high-low word conversion
	816	)))
	817	\|=(% style="width: 160px;" %)HSW1855\|(% style="width:282px" %)Screen Lock prompt display control\|(% style="width:452px" %)(((
	818	Control whether the screen lock prompt is displayed,
	819
	820	* =0: display(default value)
	821	* =Other: no display.
	822	)))
	823	\|=(% style="width: 160px;" %)HSW1856\|(% style="width:282px" %)Display map fence drawing status\|(% style="width:452px" %)(((
	824	* =0: no map fence
	825	* =1: The map fence is drawn and the device is inside the fence
	826	* =2: The map fence is drawn and the device is outside the fence
	827	)))
	828	\|=(% style="width: 160px;" %)HSW1857\|(% style="width:282px" %)USB disk download \|(% style="width:452px" %)(((
	829	* =0: download project
	830	* =1: download firmware
	831	* =2: enter the background
	832	)))
9.2	833	\|=(% style="width: 160px;" %)HSW1865\|(% style="width:282px" %)Priority connection to the cloud\|(% style="width:452px" %)(((
11.1	834	* =0: priority Ethernet
9.2	835	* =1: priority WLAN
	836	* =2: priority 4G
	837	)))
16.3	838	\|=(% style="width: 160px;" %)HSW1866\|(% style="width:282px" %)Delete the Lua extension module file\|(% style="width:452px" %)(((
9.1	839	* =0: delete;
17.1	840	* = Others: do not delete
4.6	841	)))
	842	\|=(% style="width: 160px;" %)HSW1867\|(% style="width:282px" %)Reset mode\|(% style="width:452px" %)(((
	843	Monitor address is set during reset of reset switch, whether to cancel reset,
	844
9.1	845	* = 0: yes (default);
	846	* = 1: no
4.6	847	)))
	848	\|=(% style="width: 160px;" %)HSW1868\|(% style="width:282px" %)Double-click or long press the record type table mode\|(% style="width:452px" %)(((
	849	Controls whether the button pops up when double-clicking or long pressing on record type table object
	850
9.1	851	* = 0: yes (default);
	852	* = 1: no
4.6	853	)))
12.1	854	\|=(% style="width: 160px;" %)(((
13.1	855	HSW1869
	856	)))\|(% style="width:282px" %)(((
	857	Dynamic screensaver countdown
	858	)))\|(% style="width:452px" %)(((
	859	Countdown to enter dynamic screensaver effect, unit (S)
	860	)))
	861	\|=(% style="width: 160px;" %)(((
12.1	862	HSW1870
	863	)))\|(% style="width:282px" %)(((
	864	Display or set the dynamic or static IP mode of Ethernet1
	865	)))\|(% style="width:452px" %)(((
	866	HSX1870.0 = 0, Static IP mode
	867
	868	HSX1870.0 = 1, dynamic IP mode
	869	)))
	870	\|=(% style="width: 160px;" %)(((
	871	HSW1871
	872	)))\|(% style="width:282px" %)(((
	873	Confirm the IP, subnet mask, gateway, DNS1, DNS2, and dynamic static IP settings for Ethernet1
	874	)))\|(% style="width:452px" %)(((
	875	~= 1, confirm the setting (i.e., after modifying IP-related information, set this address to 1, representing confirmation of the modification, after which it will be reset to 0)
	876	)))
	877	\|=(% style="width: 160px;" %)(((
	878	HSW1872
	879	)))\|(% colspan="1" rowspan="8" style="width:282px" %)(((
	880	①Display and modify DNS1 and DNS2 of Ethernet1
	881
	882	②Related registers can be read and written mode (only static IP mode can be written)
	883	)))\|(% style="width:452px" %)(((
	884	Ethernet1 Local DNS1 address high byte 1
	885	)))
	886	\|=(% style="width: 160px;" %)(((
	887	HSW1873
	888	)))\|(% style="width:452px" %)Ethernet1 Local DNS1 address high byte 2
	889	\|=(% style="width: 160px;" %)(((
	890	HSW1874
	891	)))\|(% style="width:452px" %)Ethernet1 Local DNS1 address high byte 3
	892	\|=(% style="width: 160px;" %)(((
	893	HSW1875
	894	)))\|(% style="width:452px" %)Ethernet1 Local DNS1 address high byte 4
	895	\|=(% style="width: 160px;" %)(((
	896	HSW1876
	897	)))\|(% style="width:452px" %)Ethernet1 Local DNS2 address high byte 1
	898	\|=(% style="width: 160px;" %)(((
	899	HSW1877
	900	)))\|(% style="width:452px" %)Ethernet1 Local DNS2 address high byte 2
	901	\|=(% style="width: 160px;" %)(((
	902	HSW1878
	903	)))\|(% style="width:452px" %)Ethernet1 Local DNS2 address high byte 3
	904	\|=(% style="width: 160px;" %)(((
	905	HSW1879
	906	)))\|(% style="width:452px" %)Ethernet1 Local DNS2 address high byte 4
17.1	907	\|=(% style="width: 160px;" %)HSW1890\|(% colspan="1" style="width:282px" %)Enable refresh current network signal\|(% style="width:452px" %)(((
	908	* =1: Refresh the network signal once after triggered (This register will be automatically reset after triggered, only update the signal value once after per 15 seconds, not able to update twice in the short interval)
	909	* =Others: not refresh
	910	)))
	911	\|=(% style="width: 160px;" %)HSW1891\|(% colspan="1" style="width:282px" %)Enable clear cache for screen data \|(% style="width:452px" %)(((
	912	* =1, not clear screen cache when switch language
	913	* =2, trigger clear cache of all screens for once time
	914	* =3, always clear cache of all screen data
	915	)))
1.1	916	\|=(% style="width: 160px;" %)HSW10000~~19999\|(% style="width:282px" %)Power-down storage area\|(% style="width:452px" %)After restart, the data remains
	917	\|=(% style="width: 160px;" %)HSW10035\|(% rowspan="13" style="width:282px" %)(((
12.1	918	Note: Valid when Ethernet1 of HMI is plugged into the network cable.
25.1	919	① When the Ethernet setting is enabled in the project parameters, this register displays the set value.
	920	② When the Ethernet setting is not enabled in the engineering parameters, the register displays the Ethernet IP automatically acquired by the HMI.
	921	③ When the HMI is not plugged into the network cable, the register will show 0 whether the engineering parameters are set or not.
	922	④ IP related registers can be read and written (only static IP mode can be written).
1.1	923	)))\|(% style="width:452px" %)Local IP address high byte 1
	924	\|=(% style="width: 160px;" %)HSW10036\|(% style="width:452px" %)Local IP address high byte 2
	925	\|=(% style="width: 160px;" %)HSW10037\|(% style="width:452px" %)Local IP address high byte 3
	926	\|=(% style="width: 160px;" %)HSW10038\|(% style="width:452px" %)Local IP address high byte 4
	927	\|=(% style="width: 160px;" %)HSW10039\|(% style="width:452px" %)Local mask IP address high byte 1
	928	\|=(% style="width: 160px;" %)HSW10040\|(% style="width:452px" %)Local mask IP address high byte 2
	929	\|=(% style="width: 160px;" %)HSW10041\|(% style="width:452px" %)Local mask IP address high byte 3
	930	\|=(% style="width: 160px;" %)HSW10042\|(% style="width:452px" %)Local mask IP address high byte 4
	931	\|=(% style="width: 160px;" %)HSW10043\|(% style="width:452px" %)Local gateway address high byte 1
	932	\|=(% style="width: 160px;" %)HSW10044\|(% style="width:452px" %)Local gateway address high byte 2
	933	\|=(% style="width: 160px;" %)HSW10045\|(% style="width:452px" %)Local gateway address high byte 3
	934	\|=(% style="width: 160px;" %)HSW10046\|(% style="width:452px" %)Local gateway address high byte 4
	935	\|=(% style="width: 160px;" %)HSW10047\|(% style="width:452px" %)Local port address
	936	\|=(% style="width: 160px;" %)HSW10048\|(% rowspan="6" style="width:282px" %)(((
12.1	937	①Display the MAC code of Ethernet1 NIC
1.1	938
12.1	939	(hexadecimal display)
	940
	941	②Read-only mode, not modifiable
1.1	942	)))\|(% style="width:452px" %)Local MAC code high word 1
	943	\|=(% style="width: 160px;" %)HSW10049\|(% style="width:452px" %)Local MAC code high word 2
	944	\|=(% style="width: 160px;" %)HSW10050\|(% style="width:452px" %)Local MAC code high word 3
	945	\|=(% style="width: 160px;" %)HSW10051\|(% style="width:452px" %)Local MAC code high word 4
	946	\|=(% style="width: 160px;" %)HSW10052\|(% style="width:452px" %)Local MAC code high word 5
	947	\|=(% style="width: 160px;" %)HSW10053\|(% style="width:452px" %)Local MAC code high word 6
16.1	948	\|=(% style="width: 160px;" %)HSW10118\|(% colspan="1" rowspan="2" style="width:282px" %)TSAP settings for HMI in the Siemens LOGO! 8 protocol\|(% style="width:452px" %)HMI local TSAP, which corresponds to the remote TSAP of PLC
1.1	949	\|=(% style="width: 160px;" %)HSW10119\|(% style="width:452px" %)HMI remote TSAP, which corresponds to the local TSAP of PLC
	950	\|=(% style="width: 160px;" %)HSW10461~~10493\|(% style="width:282px" %)Remote access password\|(% style="width:452px" %)8-character remote access password
	951	\|=(% style="width: 160px;" %)HSW10494~~10558\|(% style="width:282px" %)Machine ID (Read only)\|(% style="width:452px" %)Machine ID for remote access (read only 64-bit)
	952	\|=(% style="width: 160px;" %)HSW10576\|(% style="width:282px" %)Save dynamic installment settings\|(% style="width:452px" %)HSX10576.0=1: Save the set dynamic installment information
	953	\|=(% style="width: 160px;" %)HSW10577\|(% style="width:282px" %)Control address for installment\|(% style="width:452px" %)(((
	954	* HSX10577.0=0: disable dynamic installment
	955	* HSX10577.0=1: enable dynamic installment
	956	* HSX10577.1=0: disable static installment
	957	* HSX10577.1=1: enable static installment
	958	)))
	959	\|=(% style="width: 160px;" %)HSW10578-10583\|(% style="width:282px" %)Password for dynamic installment\|(% style="width:452px" %)Character Input/ Display (length: 6)
	960	\|=(% style="width: 160px;" %)HSW10584-10586\|(% style="width:282px" %)Expiry time of dynamic installment\|(% style="width:452px" %)Expiry time: YYYYMMDD (Numeric Input/ Display)
	961	\|=(% style="width: 160px;" %)HSW10587-10589\|(% style="width:282px" %)Last expiry time of dynamic installment\|(% style="width:452px" %)Expiry time: YYYYMMDD (Numeric Input/ Display)
	962	\|=(% style="width: 160px;" %)HSW10590\|(% style="width:282px" %)Background light time\|(% style="width:452px" %)(((
	963	Set the light time for background
	964
	965	* =0: The screen backlight is always on.
	966	* =Others: The screen backlight is on for a period of time and then turns off. The length of time is controlled by the value of the register address. Unit: second.
	967	)))
	968	\|=(% style="width: 160px;" %)HSW10591\|(% style="width:282px" %)Backlight brightness adjustment\|(% style="width:452px" %)Backlight brightness range: 1 (darkest) ~~ 100 (brightest)
	969	\|=(% style="width: 160px;" %)HSW10603\|(% style="width:282px" %)Set the printer to print orientation\|(% style="width:452px" %)(((
	970	Set the print direction:
	971
	972	* =1: Forward printing
	973	* =2: Reverse print
	974	* =Other: Forward print
	975	)))
	976	\|=(% style="width: 160px;" %)HSW10604\|(% style="width:282px" %)Print dot type\|(% style="width:452px" %)(((
	977	* =1: new firmware 8 dot matrix type
	978	* =2: new firmware 24 dot matrix type
	979	* =3: old firmware 8 dot matrix type
	980	* =4: old firmware 24 dot matrix type
	981	* =Other: new firmware 8 dot matrix type
	982	)))
	983	\|=(% style="width: 160px;" %)HSW10605\|(% style="width:282px" %)Print width of printer\|(% style="width:452px" %)Set the width of the printer to print (in pixels), such as HSW10605 = 394: The printer supports images with a print width of 394 pixels
	984	\|=(% style="width: 160px;" %)HSW10606\|(% style="width:282px" %)Printer instruction type\|(% style="width:452px" %)(((
	985	* =1: Graphic print type
	986	* =2: Dot density printing type
	987	* =3: special for EPSON printer
	988	)))
	989	\|=(% style="width: 160px;" %)HSW10607\|(% style="width:282px" %)Printer paper cutting function\|(% style="width:452px" %)(((
	990	* =1: Enable
	991	* =2: Disable
	992	)))
	993	\|=(% style="width: 160px;" %)HSW10608\|(% style="width:282px" %)Print the alignment of the text\|(% style="width:452px" %)(((
	994	* =1: Left alignment
	995	* =2: Center alignment
	996	* =3: Right alignment
	997	)))
	998	\|=(% style="width: 160px;" %)HSW10610\|(% style="width:282px" %)Set weconcloud server\|(% style="width:452px" %)(((
	999	* =0: Select the server configured in "Project Settings"
	1000	* =1: select Server 1
	1001	* =2: select Server 2
	1002	)))
	1003	\|=(% style="width: 160px;" %)HSW11750\|(% style="width:282px" %)Set the language of the Message List prompt (ie series)\|(% style="width:452px" %)(((
	1004	* =0: which is followed the project language
	1005	* =1: English
	1006	* =2: Chinese
	1007	)))
	1008	\|=(% style="width: 160px;" %)HSW11756\|(% style="width:282px" %)(((
2.1	1009	Access permission restrictions
1.1	1010
2.1	1011	(ig series and 8000/9000 series with -R after system upgrade)
1.1	1012	)))\|(% style="width:452px" %)(((
	1013	* =0: LAN or the external network both OK
	1014	* =1: Only LAN access
	1015	* =2: Only external network can access
30.1	1016	* =3: Close the functions
1.1	1017	)))
	1018	\|=(% style="width: 160px;" %)HSW11757\|(% style="width:282px" %)Enable the valid date of the dynamic installment password\|(% style="width:452px" %)(((
	1019	* =0: Disabled
	1020	* =1: Enable
	1021	)))
	1022	\|=(% style="width: 160px;" %)HSW11758\|(% style="width:282px" %)Enable Screensaver\|(% style="width:452px" %)(((
	1023	* =0: Disabled
	1024	* =1: Enable
	1025	)))
	1026	\|=(% style="width: 160px;" %)HSW11759\|(% style="width:282px" %)Screensaver interval time\|(% style="width:452px" %)(((
	1027	Set the time how long will enter Screensaver (Range 10~~43200s)
	1028	)))
	1029	\|=(% style="width: 160px;" %)HSW11760\|(% style="width:282px" %)Screensaver countdown\|(% style="width:452px" %)Display the countdown to enter the Screensaver, unit: second.
	1030	\|=(% style="width: 160px;" %)HSW11761\|(% style="width:282px" %)Screensaver screen number\|(% style="width:452px" %)Set the screen number for Screensaver
13.1	1031	\|=(% style="width: 160px;" %)(((
	1032	HSW11762
	1033	)))\|(% style="width:282px" %)(((
	1034	Dynamic screensaver control address
	1035	)))\|(% style="width:452px" %)(((
14.1	1036	HSX11762.0=0, initialize with project configuration;
	1037
	1038	HSX11762.0=1, initialize with special register configuration;
	1039
	1040	HSX11762.1=0, disable dynamic screensaver;
	1041
	1042	HSX11762.1=1, enable dynamic screensaver
13.1	1043	)))
	1044	\|=(% style="width: 160px;" %)(((
	1045	HSW11763
	1046	)))\|(% style="width:282px" %)(((
	1047	Waiting time to enter the dynamic screensaver
	1048	)))\|(% style="width:452px" %)(((
	1049	Waiting time when the screen is not operated, range 1~~720 minutes
	1050	)))
	1051	\|=(% style="width: 160px;" %)(((
	1052	HSW11764
	1053	)))\|(% style="width:282px" %)(((
	1054	Animated screensaver animation type
	1055	)))\|(% style="width:452px" %)(((
14.1	1056	~=0: Raster,=1: Blinds,=2: Bubble
13.1	1057	)))
1.1	1058
7.1	1059	== Serial port communication configuration ==
1.1	1060
	1061	(% class="table-bordered" %)
5.1	1062	\|=(% scope="row" style="width: 102px;" %)Port\|=(% style="width: 173px;" %)Function\|=(% style="width: 122px;" %)Address\|=(% colspan="2" style="width: 506px;" %)Description
1.1	1063	\|(% colspan="1" rowspan="11" style="width:102px" %)COM1\|(% style="width:173px" %)Communication mode\|(% style="width:122px" %)HSW10061\|(% colspan="2" style="width:506px" %)(((
	1064	* =0: RS232
	1065	* =1: RS485
	1066	* =2: RS422
	1067	)))
	1068	\|(% style="width:173px" %)Baud rate\|(% style="width:122px" %)HSW10062\|(% colspan="2" style="width:506px" %)(((
	1069	* =0: 1200
	1070	* =1: 2400
	1071	* =2: 4800
	1072	* =3: 9600
	1073	* =4: 19200
	1074	* =5: 38400
	1075	* =6: 57600
	1076	* =7: 115200
	1077	* =8: 230400
	1078	)))
	1079	\|(% style="width:173px" %)Data bit\|(% style="width:122px" %)HSW10063\|(% colspan="2" style="width:506px" %)(((
	1080	* =7: 7 bit
	1081	* =8: 8 bit
	1082	)))
	1083	\|(% style="width:173px" %)Stop bit\|(% style="width:122px" %)HSW10064\|(% colspan="2" style="width:506px" %)(((
	1084	* =1: 1 bit
	1085	* =2: 2 bit
	1086	)))
	1087	\|(% style="width:173px" %)Check bit\|(% style="width:122px" %)HSW10065\|(% colspan="2" style="width:506px" %)(((
	1088	* =0: None
	1089	* =1: ODD
	1090	* =2: EVEN
	1091	)))
6.1	1092	\|(% style="width:173px" %)Wait timeout\|(% style="width:122px" %)HSW10066\|(% colspan="2" style="width:506px" %)(((
	1093	* Unit: ms.
	1094	* Range: 0 to 30000
	1095	)))
	1096	\|(% style="width:173px" %)reveive timeout\|(% style="width:122px" %)HSW10067\|(% colspan="2" style="width:506px" %)(((
	1097	* Unit: ms.
	1098	* Range: 0 to 30000
	1099	)))
	1100	\|(% style="width:173px" %)Retry time\|(% style="width:122px" %)HSW10068\|(% colspan="2" style="width:506px" %)(((
	1101	* Unit: times.
	1102	* Range: 0 to 100
	1103	)))
	1104	\|(% style="width:173px" %)Retry timeout\|(% style="width:122px" %)HSW10069\|(% colspan="2" style="width:506px" %)(((
	1105	* Unit: s.
	1106	* Range: 0 to 300
	1107	)))
1.1	1108	\|(% style="width:173px" %)HMI station number\|(% style="width:122px" %)HSW10070\|(% colspan="2" style="width:506px" %)
	1109	\|(% style="width:173px" %)PLC station number\|(% style="width:122px" %)HSW10071\|(% colspan="2" style="width:506px" %)
	1110	\|(% colspan="1" rowspan="11" style="width:102px" %)COM1-2\|(% style="width:173px" %)Communication mode\|(% style="width:122px" %)HSW10094\|(% colspan="2" style="width:506px" %)(((
	1111	* =0: RS232
	1112	* =1: RS485
	1113	* =2: RS422
	1114	* =6: RS485-2
	1115	)))
	1116	\|(% style="width:173px" %)Baud rate\|(% style="width:122px" %)HSW10095\|(% colspan="2" style="width:506px" %)(((
	1117	* =0: 1200
	1118	* =1: 2400
	1119	* =2: 4800
	1120	* =3: 9600
	1121	* =4: 19200
	1122	* =5: 38400
	1123	* =6: 57600
	1124	* =7: 115200
	1125	* =8: 230400
	1126	)))
	1127	\|(% style="width:173px" %)Data bit\|(% style="width:122px" %)HSW10096\|(% colspan="2" style="width:506px" %)(((
	1128	* =7: 7 bit
	1129	* =8: 8 bit
	1130	)))
	1131	\|(% style="width:173px" %)Stop bit\|(% style="width:122px" %)HSW10097\|(% colspan="2" style="width:506px" %)(((
	1132	* =1: 1 bit
	1133	* =2: 2 bit
	1134	)))
	1135	\|(% style="width:173px" %)Check bit\|(% style="width:122px" %)HSW10098\|(% colspan="2" style="width:506px" %)(((
	1136	* =0: None
	1137	* =1: ODD
	1138	* =2: EVEN
	1139	)))
6.1	1140	\|(% style="width:173px" %)Wait timeout\|(% style="width:122px" %)HSW10099\|(% colspan="2" style="width:506px" %)(((
	1141	* Unit: ms.
	1142	* Range: 0 to 30000
	1143	)))
	1144	\|(% style="width:173px" %)receive timeout\|(% style="width:122px" %)HSW10100\|(% colspan="2" style="width:506px" %)(((
	1145	* Unit: ms.
	1146	* Range: 0 to 30000
	1147	)))
	1148	\|(% style="width:173px" %)Retry time\|(% style="width:122px" %)HSW10101\|(% colspan="2" style="width:506px" %)(((
	1149	* Unit: times.
	1150	* Range: 0 to 100
	1151	)))
	1152	\|(% style="width:173px" %)Retry timeout\|(% style="width:122px" %)HSW10102\|(% colspan="2" style="width:506px" %)(((
	1153	* Unit: s.
	1154	* Range: 0 to 30
	1155	)))
1.1	1156	\|(% style="width:173px" %)HMI station number\|(% style="width:122px" %)HSW10103\|(% colspan="2" style="width:506px" %)
	1157	\|(% style="width:173px" %)PLC station number\|(% style="width:122px" %)HSW10104\|(% colspan="2" style="width:506px" %)
	1158	\|(% colspan="1" rowspan="11" style="width:102px" %)COM1-3\|(% style="width:173px" %)Communication mode\|(% style="width:122px" %)HSW10120\|(% colspan="2" style="width:506px" %)(((
	1159	* =0: RS232
	1160	* =1: RS485
	1161	* =2: RS422
	1162	* =6: RS485-2
	1163	)))
	1164	\|(% style="width:173px" %)Baud rate\|(% style="width:122px" %)HSW10121\|(% colspan="2" style="width:506px" %)(((
	1165	* =0: 1200
	1166	* =1: 2400
	1167	* =2: 4800
	1168	* =3: 9600
	1169	* =4: 19200
	1170	* =5: 38400
	1171	* =6: 57600
	1172	* =7: 115200
	1173	* =8: 230400
	1174	)))
	1175	\|(% style="width:173px" %)Data bit\|(% style="width:122px" %)HSW10122\|(% colspan="2" style="width:506px" %)(((
	1176	* =7: 7 bit
	1177	* =8: 8 bit
	1178	)))
	1179	\|(% style="width:173px" %)Stop bit\|(% style="width:122px" %)HSW10123\|(% colspan="2" style="width:506px" %)(((
	1180	* =1: 1 bit
	1181	* =2: 2 bit
	1182	)))
	1183	\|(% style="width:173px" %)Check bit\|(% style="width:122px" %)HSW10124\|(% colspan="2" style="width:506px" %)(((
	1184	* =0: None
	1185	* =1: ODD
	1186	* =2: EVEN
	1187	)))
6.1	1188	\|(% style="width:173px" %)Wait timeout\|(% style="width:122px" %)HSW10125\|(% colspan="2" style="width:506px" %)(((
	1189	* Unit: ms.
	1190	* Range: 0 to 30000
	1191	)))
	1192	\|(% style="width:173px" %)receive timeout\|(% style="width:122px" %)HSW10126\|(% colspan="2" style="width:506px" %)(((
	1193	* Unit: ms.
	1194	* Range: 0 to 30000
	1195	)))
	1196	\|(% style="width:173px" %)Retry time\|(% style="width:122px" %)HSW10127\|(% colspan="2" style="width:506px" %)(((
	1197	* Unit: times.
	1198	* Range: 0 to 100
	1199	)))
	1200	\|(% style="width:173px" %)Retry timeout\|(% style="width:122px" %)HSW10128\|(% colspan="2" style="width:506px" %)(((
	1201	* Unit: s.
	1202	* Range: 0 to 30
	1203	)))
1.1	1204	\|(% style="width:173px" %)HMI station number\|(% style="width:122px" %)HSW10129\|(% colspan="2" style="width:506px" %)
	1205	\|(% style="width:173px" %)PLC station number\|(% style="width:122px" %)HSW10130\|(% colspan="2" style="width:506px" %)
	1206	\|(% colspan="1" rowspan="11" style="width:102px" %)COM2\|(% style="width:173px" %)Communication mode\|(% style="width:122px" %)HSW10072\|(% colspan="2" style="width:506px" %)(((
	1207	* =0: RS232
	1208	* =1: RS485
	1209	)))
	1210	\|(% style="width:173px" %)Baud rate\|(% style="width:122px" %)HSW10073\|(% colspan="2" style="width:506px" %)(((
	1211	* =0: 1200
	1212	* =1: 2400
	1213	* =2: 4800
	1214	* =3: 9600
	1215	* =4: 19200
	1216	* =5: 38400
	1217	* =6: 57600
	1218	* =7: 115200
	1219	* =8: 230400
	1220	)))
	1221	\|(% style="width:173px" %)Data bit\|(% style="width:122px" %)HSW10074\|(% colspan="2" style="width:506px" %)(((
	1222	* =7: 7 bit
	1223	* =8: 8 bit
	1224	)))
	1225	\|(% style="width:173px" %)Stop bit\|(% style="width:122px" %)HSW10075\|(% colspan="2" style="width:506px" %)(((
	1226	* =1: 1 bit
	1227	* =2: 2 bit
	1228	)))
	1229	\|(% style="width:173px" %)Check bit\|(% style="width:122px" %)HSW10076\|(% colspan="2" style="width:506px" %)(((
	1230	* =0: None
	1231	* =1: ODD
	1232	* =2: EVEN
	1233	)))
6.1	1234	\|(% style="width:173px" %)Wait timeout\|(% style="width:122px" %)HSW10077\|(% colspan="2" style="width:506px" %)(((
	1235	* Unit: ms.
	1236	* Range: 0 to 30000
	1237	)))
	1238	\|(% style="width:173px" %)receive timeout\|(% style="width:122px" %)HSW10078\|(% colspan="2" style="width:506px" %)(((
	1239	* Unit: ms.
	1240	* Range: 0 to 30000
	1241	)))
	1242	\|(% style="width:173px" %)Retry time\|(% style="width:122px" %)HSW10079\|(% colspan="2" style="width:506px" %)(((
	1243	* Unit: times.
	1244	* Range: 0 to 100
	1245	)))
	1246	\|(% style="width:173px" %)Retry timeout\|(% style="width:122px" %)HSW10080\|(% colspan="2" style="width:506px" %)(((
	1247	* Unit: s.
	1248	* Range: 0 to 30
	1249	)))
1.1	1250	\|(% style="width:173px" %)HMI station number\|(% style="width:122px" %)HSW10081\|(% colspan="2" style="width:506px" %)
	1251	\|(% style="width:173px" %)PLC station number\|(% style="width:122px" %)HSW10082\|(% colspan="2" style="width:506px" %)
	1252	\|(% colspan="1" rowspan="11" style="width:102px" %)COM2-2\|(% style="width:173px" %)Communication mode\|(% style="width:122px" %)HSW10105\|(% colspan="2" style="width:506px" %)(((
	1253	* =0: RS232
	1254	* =1: RS485
	1255	)))
	1256	\|(% style="width:173px" %)Baud rate\|(% style="width:122px" %)HSW10106\|(% colspan="2" style="width:506px" %)(((
	1257	* =0: 1200
	1258	* =1: 2400
	1259	* =2: 4800
	1260	* =3: 9600
	1261	* =4: 19200
	1262	* =5: 38400
	1263	* =6: 57600
	1264	* =7: 115200
	1265	* =8: 230400
	1266	)))
	1267	\|(% style="width:173px" %)Data bit\|(% style="width:122px" %)HSW10107\|(% colspan="2" style="width:506px" %)(((
	1268	* =7: 7 bit
	1269	* =8: 8 bit
	1270	)))
	1271	\|(% style="width:173px" %)Stop bit\|(% style="width:122px" %)HSW10108\|(% colspan="2" style="width:506px" %)(((
	1272	* =1: 1 bit
	1273	* =2: 2 bit
	1274	)))
	1275	\|(% style="width:173px" %)Check bit\|(% style="width:122px" %)HSW10109\|(% colspan="2" style="width:506px" %)(((
	1276	* =0: None
	1277	* =1: ODD
	1278	* =2: EVEN
	1279	)))
6.1	1280	\|(% style="width:173px" %)Wait timeout\|(% style="width:122px" %)HSW10110\|(% colspan="2" style="width:506px" %)(((
	1281	* Unit: ms.
	1282	* Range: 0 to 30000
	1283	)))
	1284	\|(% style="width:173px" %)receive timeout\|(% style="width:122px" %)HSW10111\|(% colspan="2" style="width:506px" %)(((
	1285	* Unit: ms.
	1286	* Range: 0 to 30000
	1287	)))
	1288	\|(% style="width:173px" %)Retry time\|(% style="width:122px" %)HSW10112\|(% colspan="2" style="width:506px" %)(((
	1289	* Unit: times.
	1290	* Range: 0 to 100
	1291	)))
	1292	\|(% style="width:173px" %)Retry timeout\|(% style="width:122px" %)HSW10113\|(% colspan="2" style="width:506px" %)(((
	1293	* Unit: s.
	1294	* Range: 0 to 30
	1295	)))
1.1	1296	\|(% style="width:173px" %)HMI station number\|(% style="width:122px" %)HSW10114\|(% colspan="2" style="width:506px" %)
	1297	\|(% style="width:173px" %)PLC station number\|(% style="width:122px" %)HSW10115\|(% colspan="2" style="width:506px" %)
	1298	\|(% colspan="1" rowspan="11" style="width:102px" %)COM3\|(% style="width:173px" %)Communication mode\|(% style="width:122px" %)HSW10083\|(% colspan="2" style="width:506px" %)(((
	1299	* =1: RS485
	1300	)))
	1301	\|(% style="width:173px" %)Baud rate\|(% style="width:122px" %)HSW10084\|(% colspan="2" style="width:506px" %)(((
	1302	* =0: 1200
	1303	* =1: 2400
	1304	* =2: 4800
	1305	* =3: 9600
	1306	* =4: 19200
	1307	* =5: 38400
	1308	* =6: 57600
	1309	* =7: 115200
	1310	* =8: 230400
	1311	)))
	1312	\|(% style="width:173px" %)Data bit\|(% style="width:122px" %)HSW10085\|(% colspan="2" style="width:506px" %)(((
	1313	* =7: 7 bit
	1314	* =8: 8 bit
	1315	)))
	1316	\|(% style="width:173px" %)Stop bit\|(% style="width:122px" %)HSW10086\|(% colspan="2" style="width:506px" %)(((
	1317	* =1: 1 bit
	1318	* =2: 2 bit
	1319	)))
	1320	\|(% style="width:173px" %)Check bit\|(% style="width:122px" %)HSW10087\|(% colspan="2" style="width:506px" %)(((
	1321	* =0: None
	1322	* =1: ODD
	1323	* =2: EVEN
	1324	)))
6.1	1325	\|(% style="width:173px" %)Wait timeout\|(% style="width:122px" %)HSW10088\|(% colspan="2" style="width:506px" %)(((
	1326	* Unit: ms.
	1327	* Range: 0 to 30000
	1328	)))
	1329	\|(% style="width:173px" %)receive timeout\|(% style="width:122px" %)HSW10089\|(% colspan="2" style="width:506px" %)(((
	1330	* Unit: ms.
	1331	* Range: 0 to 30000
	1332	)))
	1333	\|(% style="width:173px" %)Retry time\|(% style="width:122px" %)HSW10090\|(% colspan="2" style="width:506px" %)(((
	1334	* Unit: times.
	1335	* Range: 0 to 100
	1336	)))
	1337	\|(% style="width:173px" %)Retry timeout\|(% style="width:122px" %)HSW10091\|(% colspan="2" style="width:506px" %)(((
	1338	* Unit: s.
	1339	* Range: 0 to 30
	1340	)))
1.1	1341	\|(% style="width:173px" %)HMI station number\|(% style="width:122px" %)HSW10092\|(% colspan="2" style="width:506px" %)
	1342	\|(% style="width:173px" %)PLC station number\|(% style="width:122px" %)HSW10093\|(% colspan="2" style="width:506px" %)
	1343	\|(% colspan="1" rowspan="2" style="width:102px" %)CAN port\|(% style="width:173px" %)CAN1 baud rate\|(% style="width:122px" %)HSW010116\|(% style="width:299px" %)(((
6.1	1344	Unit: K, the baud rate must be an integer.
	1345
	1346	For example, when the baud rate required is 250000, just enter 250.
1.1	1347	)))\|(% colspan="1" rowspan="2" style="width:218px" %)✎Note: If baud rate has been modified,please wait 5 seconds,then restart the HMI to take effect.
6.1	1348	\|(% style="width:173px" %)CAN2 baud rate\|(% style="width:122px" %)HSW010117\|(% style="width:299px" %)(((
	1349	Unit: K, the baud rate must be an integer.
1.1	1350
6.1	1351	For example, when the baud rate required is 250000, just enter 250.
	1352	)))
	1353
7.1	1354	== Ethernet communication configuration ==
1.1	1355
	1356	(% class="table-bordered" %)
8.1	1357	\|(% style="width:40px" %)No.\|(% style="width:295px" %)Function\|(% style="width:220px" %)Address\|(% style="width:336px" %)Description
1.1	1358	\|(% rowspan="7" style="width:40px" %)1\|(% colspan="1" rowspan="7" style="width:295px" %)Ethernet parameter configuration for communication number 1 in list. Configure those addresses according to connected device. After configuration, wait for 5 seconds and restart the HMI.\|(% style="width:220px" %)HSW11004\|(% style="width:336px" %)Device IP address high word 1
	1359	\|(% style="width:220px" %)HSW11005\|(% style="width:336px" %)Device IP address high word 2
	1360	\|(% style="width:220px" %)HSW11006\|(% style="width:336px" %)Device IP address high word 3
	1361	\|(% style="width:220px" %)HSW11007\|(% style="width:336px" %)Device IP address high word 4
	1362	\|(% style="width:220px" %)HSW11008\|(% style="width:336px" %)Device Port number
8.1	1363	\|(% style="width:220px" %)HSW11009\|(% style="width:336px" %)(((
	1364	~=2 TCP
	1365
	1366	~=3 UDP
1.1	1367	)))
	1368	\|(% style="width:220px" %)HSW11010\|(% style="width:336px" %)Reserved
	1369	\|(% rowspan="7" style="width:40px" %)2\|(% colspan="1" rowspan="7" style="width:295px" %)Ethernet parameter configuration for communication number 2 in list. Configure those addresses according to connected device. After configuration, wait for 5 seconds and restart the HMI.\|(% style="width:220px" %)HSW11011\|(% style="width:336px" %)Device IP address high word 1
	1370	\|(% style="width:220px" %)HSW11012\|(% style="width:336px" %)Device IP address high word 2
	1371	\|(% style="width:220px" %)HSW11013\|(% style="width:336px" %)Device IP address high word 3
	1372	\|(% style="width:220px" %)HSW11014\|(% style="width:336px" %)Device IP address high word 4
	1373	\|(% style="width:220px" %)HSW11015\|(% style="width:336px" %)Device Port number
8.1	1374	\|(% style="width:220px" %)HSW11016\|(% style="width:336px" %)(((
	1375	~=2 TCP
	1376
	1377	~=3 UDP
1.1	1378	)))
	1379	\|(% style="width:220px" %)HSW11017\|(% style="width:336px" %)Reserved
	1380	\|(% style="width:40px" %)…\|(% style="width:295px" %) \|(% style="width:220px" %)…\|(% style="width:336px" %)…
	1381	\|(% rowspan="7" style="width:40px" %)32\|(% colspan="1" rowspan="7" style="width:295px" %)Ethernet parameter configuration for communication number 32 in list. Configure those addresses according to connected device. After configuration, wait for 5 seconds and restart the HMI.\|(% style="width:220px" %)HSW11221\|(% style="width:336px" %)Device IP address high word 1
	1382	\|(% style="width:220px" %)HSW11222\|(% style="width:336px" %)Device IP address high word 2
	1383	\|(% style="width:220px" %)HSW11223\|(% style="width:336px" %)Device IP address high word 3
	1384	\|(% style="width:220px" %)HSW11224\|(% style="width:336px" %)Device IP address high word 4
	1385	\|(% style="width:220px" %)HSW11225\|(% style="width:336px" %)Device Port number
8.1	1386	\|(% style="width:220px" %)HSW11226\|(% style="width:336px" %)(((
	1387	~=2 TCP;
	1388
	1389	~=3 UDP
	1390	)))
1.1	1391	\|(% style="width:220px" %)HSW11227\|(% style="width:336px" %)Reserved
	1392
3.1	1393	(% class="box infomessage" %)
	1394	(((
1.1	1395	✎Note: The number of Ethernet connections supported by different HMI series varies.
3.1	1396	)))
1.1	1397
7.1	1398	== Communication control ==
1.1	1399
	1400	(% class="table-bordered" %)
4.1	1401	\|=(% style="width: 135px;" %)Communication No.\|=(% style="width: 102px;" %)Station No.\|=(% style="width: 185px;" %)Control bit\|=(% style="width: 191px;" %)Communication lamp\|=(% style="width: 271px;" %)Description
1.1	1402	\|(% colspan="1" rowspan="16" style="width:135px" %)1\|(% style="width:102px" %)0~~15\|(% style="width:185px" %)HSX550.0～HSX550.15\|(% style="width:191px" %)HSX558.0～HSX558.15\|(% rowspan="160" style="width:271px" %)Communication number refers to the number in "Communication Port Configuration". A number provides 256 device station numbers. Each station number corresponds to a communication control bit and a communication indicator bit. Registers HSX550.0 to HSX805.15 are used to control the station numbers from 0 to 127, and registers HSX1150.0 to HSX1405.15 are used to control station numbers 128 to 255.
	1403	\|(% style="width:102px" %)16~~31\|(% style="width:185px" %)HSX551.0～HSX551.15\|(% style="width:191px" %)HSX559.0～HSX559.15
	1404	\|(% style="width:102px" %)32~~47\|(% style="width:185px" %)HSX552.0～HSX552.15\|(% style="width:191px" %)HSX560.0～HSX560.15
	1405	\|(% style="width:102px" %)48~~63\|(% style="width:185px" %)HSX553.0～HSX553.15\|(% style="width:191px" %)HSX561.0～HSX561.15
	1406	\|(% style="width:102px" %)64～79\|(% style="width:185px" %)HSX554.0～HSX554.15\|(% style="width:191px" %)HSX562.0～HSX562.15
	1407	\|(% style="width:102px" %)80～95\|(% style="width:185px" %)HSX555.0～HSX555.15\|(% style="width:191px" %)HSX563.0～HSX563.15
	1408	\|(% style="width:102px" %)96～111\|(% style="width:185px" %)HSX556.0～HSX556.15\|(% style="width:191px" %)HSX564.0～HSX564.15
	1409	\|(% style="width:102px" %)112～127\|(% style="width:185px" %)HSX557.0～HSX557.15\|(% style="width:191px" %)HSX565.0～HSX565.15
	1410	\|(% style="width:102px" %)128～143\|(% style="width:185px" %)HSX1150.0～HSX1150.15\|(% style="width:191px" %)HSX1158.0～HSX1158.15
	1411	\|(% style="width:102px" %)144～159\|(% style="width:185px" %)HSX1151.0～HSX1151.15\|(% style="width:191px" %)HSX1159.0～HSX1159.15
	1412	\|(% style="width:102px" %)160～175\|(% style="width:185px" %)HSX1152.0～HSX1152.15\|(% style="width:191px" %)HSX1160.0～HSX1160.15
	1413	\|(% style="width:102px" %)176～191\|(% style="width:185px" %)HSX1153.0～HSX1153.15\|(% style="width:191px" %)HSX1161.0～HSX1161.15
	1414	\|(% style="width:102px" %)192～207\|(% style="width:185px" %)HSX1154.0～HSX1154.15\|(% style="width:191px" %)HSX1162.0～HSX1162.15
	1415	\|(% style="width:102px" %)208～223\|(% style="width:185px" %)HSX1155.0～HSX1155.15\|(% style="width:191px" %)HSX1163.0～HSX1163.15
	1416	\|(% style="width:102px" %)224～239\|(% style="width:185px" %)HSX1156.0～HSX1156.15\|(% style="width:191px" %)HSX1164.0～HSX1164.15
	1417	\|(% style="width:102px" %)240～255\|(% style="width:185px" %)HSX1157.0～HSX1157.15\|(% style="width:191px" %)HSX1165.0～HSX1165.15
	1418	\|(% colspan="1" rowspan="16" style="width:135px" %)2\|(% style="width:102px" %)0～15\|(% style="width:185px" %)HSX566.0～HSX566.15\|(% style="width:191px" %)HSX574.0～HSX574.15
	1419	\|(% style="width:102px" %)16～31\|(% style="width:185px" %)HSX567.0～HSX567.15\|(% style="width:191px" %)HSX575.0～HSX575.15
	1420	\|(% style="width:102px" %)32～47\|(% style="width:185px" %)HSX568.0～HSX568.15\|(% style="width:191px" %)HSX576.0～HSX576.15
	1421	\|(% style="width:102px" %)48～63\|(% style="width:185px" %)HSX569.0～HSX569.15\|(% style="width:191px" %)HSX577.0～HSX577.15
	1422	\|(% style="width:102px" %)64～79\|(% style="width:185px" %)HSX570.0～HSX570.15\|(% style="width:191px" %)HSX578.0～HSX578.15
	1423	\|(% style="width:102px" %)80～95\|(% style="width:185px" %)HSX571.0～HSX571.15\|(% style="width:191px" %)HSX579.0～HSX579.15
	1424	\|(% style="width:102px" %)96～111\|(% style="width:185px" %)HSX572.0～HSX572.15\|(% style="width:191px" %)HSX580.0～HSX580.15
	1425	\|(% style="width:102px" %)112～127\|(% style="width:185px" %)HSX573.0～HSX573.15\|(% style="width:191px" %)HSX581.0～HSX581.15
	1426	\|(% style="width:102px" %)128～143\|(% style="width:185px" %)HSX1166.0～HSX1166.15\|(% style="width:191px" %)HSX1174.0～HSX1174.15
	1427	\|(% style="width:102px" %)144～159\|(% style="width:185px" %)HSX1167.0～HSX1167.15\|(% style="width:191px" %)HSX1175.0～HSX1175.15
	1428	\|(% style="width:102px" %)160～175\|(% style="width:185px" %)HSX1168.0～HSX1168.15\|(% style="width:191px" %)HSX1176.0～HSX1176.15
	1429	\|(% style="width:102px" %)176～191\|(% style="width:185px" %)HSX1169.0～HSX1169.15\|(% style="width:191px" %)HSX1177.0～HSX1177.15
	1430	\|(% style="width:102px" %)192～207\|(% style="width:185px" %)HSX1170.0～HSX1170.15\|(% style="width:191px" %)HSX1178.0～HSX1178.15
	1431	\|(% style="width:102px" %)208～223\|(% style="width:185px" %)HSX1171.0～HSX1171.15\|(% style="width:191px" %)HSX1179.0～HSX1179.15
	1432	\|(% style="width:102px" %)224～239\|(% style="width:185px" %)HSX1172.0～HSX1172.15\|(% style="width:191px" %)HSX1180.0～HSX1180.15
	1433	\|(% style="width:102px" %)240～255\|(% style="width:185px" %)HSX1173.0～HSX1173.15\|(% style="width:191px" %)HSX1181.0～HSX1181.15
	1434	\|(% colspan="1" rowspan="16" style="width:135px" %)3\|(% style="width:102px" %)0～15\|(% style="width:185px" %)HSX582.0～HSX582.15\|(% style="width:191px" %)HSX590.0～HSX590.15
	1435	\|(% style="width:102px" %)16～31\|(% style="width:185px" %)HSX583.0～HSX583.15\|(% style="width:191px" %)HSX591.0～HSX591.15
	1436	\|(% style="width:102px" %)32～47\|(% style="width:185px" %)HSX584.0～HSX584.15\|(% style="width:191px" %)HSX592.0～HSX592.15
	1437	\|(% style="width:102px" %)48～63\|(% style="width:185px" %)HSX585.0～HSX585.15\|(% style="width:191px" %)HSX593.0～HSX593.15
	1438	\|(% style="width:102px" %)64～79\|(% style="width:185px" %)HSX586.0～HSX586.15\|(% style="width:191px" %)HSX594.0～HSX594.15
	1439	\|(% style="width:102px" %)80～95\|(% style="width:185px" %)HSX587.0～HSX587.15\|(% style="width:191px" %)HSX595.0～HSX595.15
	1440	\|(% style="width:102px" %)96～111\|(% style="width:185px" %)HSX588.0～HSX588.15\|(% style="width:191px" %)HSX596.0～HSX596.15
	1441	\|(% style="width:102px" %)112～127\|(% style="width:185px" %)HSX589.0～HSX589.15\|(% style="width:191px" %)HSX597.0～HSX597.15
	1442	\|(% style="width:102px" %)128～143\|(% style="width:185px" %)HSX1182.0～HSX1182.15\|(% style="width:191px" %)HSX1190.0～HSX1190.15
	1443	\|(% style="width:102px" %)144～159\|(% style="width:185px" %)HSX1183.0～HSX1183.15\|(% style="width:191px" %)HSX1191.0～HSX1191.15
	1444	\|(% style="width:102px" %)160～175\|(% style="width:185px" %)HSX1184.0～HSX1184.15\|(% style="width:191px" %)HSX1192.0～HSX1192.15
	1445	\|(% style="width:102px" %)176～191\|(% style="width:185px" %)HSX1185.0～HSX1185.15\|(% style="width:191px" %)HSX1193.0～HSX1193.15
	1446	\|(% style="width:102px" %)192～207\|(% style="width:185px" %)HSX1186.0～HSX1186.15\|(% style="width:191px" %)HSX1194.0～HSX1194.15
	1447	\|(% style="width:102px" %)208～223\|(% style="width:185px" %)HSX1187.0～HSX1187.15\|(% style="width:191px" %)HSX1195.0～HSX1195.15
	1448	\|(% style="width:102px" %)224～239\|(% style="width:185px" %)HSX1188.0～HSX1188.15\|(% style="width:191px" %)HSX1196.0～HSX1196.15
	1449	\|(% style="width:102px" %)240～255\|(% style="width:185px" %)HSX1189.0～HSX1189.15\|(% style="width:191px" %)HSX1197.0～HSX1197.15
	1450	\|(% colspan="1" rowspan="16" style="width:135px" %)4\|(% style="width:102px" %)0～15\|(% style="width:185px" %)HSX598.0～HSX598.15\|(% style="width:191px" %)HSX606.0～HSX606.15
	1451	\|(% style="width:102px" %)16～31\|(% style="width:185px" %)HSX599.0～HSX599.15\|(% style="width:191px" %)HSX607.0～HSX607.15
	1452	\|(% style="width:102px" %)32～47\|(% style="width:185px" %)HSX600.0～HSX600.15\|(% style="width:191px" %)HSX608.0～HSX608.15
	1453	\|(% style="width:102px" %)48～63\|(% style="width:185px" %)HSX601.0～HSX601.15\|(% style="width:191px" %)HSX609.0～HSX609.15
	1454	\|(% style="width:102px" %)64～79\|(% style="width:185px" %)HSX602.0～HSX602.15\|(% style="width:191px" %)HSX610.0～HSX610.15
	1455	\|(% style="width:102px" %)80～95\|(% style="width:185px" %)HSX603.0～HSX603.15\|(% style="width:191px" %)HSX611.0～HSX611.15
	1456	\|(% style="width:102px" %)96～111\|(% style="width:185px" %)HSX604.0～HSX604.15\|(% style="width:191px" %)HSX612.0～HSX612.15
	1457	\|(% style="width:102px" %)112～127\|(% style="width:185px" %)HSX605.0～HSX605.15\|(% style="width:191px" %)HSX613.0～HSX613.15
	1458	\|(% style="width:102px" %)128～143\|(% style="width:185px" %)HSX1198.0～HSX1198.15\|(% style="width:191px" %)HSX1206.0～HSX1206.15
	1459	\|(% style="width:102px" %)144～159\|(% style="width:185px" %)HSX1199.0～HSX1199.15\|(% style="width:191px" %)HSX1207.0～HSX1207.15
	1460	\|(% style="width:102px" %)160～175\|(% style="width:185px" %)HSX1200.0～HSX1200.15\|(% style="width:191px" %)HSX1208.0～HSX1208.15
	1461	\|(% style="width:102px" %)176～191\|(% style="width:185px" %)HSX1201.0～HSX1201.15\|(% style="width:191px" %)HSX1209.0～HSX1209.15
	1462	\|(% style="width:102px" %)192～207\|(% style="width:185px" %)HSX1202.0～HSX1202.15\|(% style="width:191px" %)HSX1210.0～HSX1210.15
	1463	\|(% style="width:102px" %)208～223\|(% style="width:185px" %)HSX1203.0～HSX1203.15\|(% style="width:191px" %)HSX1211.0～HSX1211.15
	1464	\|(% style="width:102px" %)224～239\|(% style="width:185px" %)HSX1204.0～HSX1204.15\|(% style="width:191px" %)HSX1212.0～HSX1212.15
	1465	\|(% style="width:102px" %)240～255\|(% style="width:185px" %)HSX1205.0～HSX1205.15\|(% style="width:191px" %)HSX1213.0～HSX1213.15
	1466	\|(% colspan="1" rowspan="16" style="width:135px" %)5\|(% style="width:102px" %)0～15\|(% style="width:185px" %)HSX614.0～HSX614.15\|(% style="width:191px" %)HSX622.0～HSX622.15
	1467	\|(% style="width:102px" %)16～31\|(% style="width:185px" %)HSX615.0～HSX615.15\|(% style="width:191px" %)HSX623.0～HSX623.15
	1468	\|(% style="width:102px" %)32～47\|(% style="width:185px" %)HSX616.0～HSX616.15\|(% style="width:191px" %)HSX624.0～HSX624.15
	1469	\|(% style="width:102px" %)48～63\|(% style="width:185px" %)HSX617.0～HSX617.15\|(% style="width:191px" %)HSX625.0～HSX625.15
	1470	\|(% style="width:102px" %)64～79\|(% style="width:185px" %)HSX618.0～HSX618.15\|(% style="width:191px" %)HSX626.0～HSX626.15
	1471	\|(% style="width:102px" %)80～95\|(% style="width:185px" %)HSX619.0～HSX619.15\|(% style="width:191px" %)HSX627.0～HSX627.15
	1472	\|(% style="width:102px" %)96～111\|(% style="width:185px" %)HSX620.0～HSX620.15\|(% style="width:191px" %)HSX628.0～HSX628.15
	1473	\|(% style="width:102px" %)112～127\|(% style="width:185px" %)HSX621.0～HSX621.15\|(% style="width:191px" %)HSX629.0～HSX629.15
	1474	\|(% style="width:102px" %)128～143\|(% style="width:185px" %)HSX1214.0～HSX1214.15\|(% style="width:191px" %)HSX1222.0～HSX1222.15
	1475	\|(% style="width:102px" %)144～159\|(% style="width:185px" %)HSX1215.0～HSX1215.15\|(% style="width:191px" %)HSX1223.0～HSX1223.15
	1476	\|(% style="width:102px" %)160～175\|(% style="width:185px" %)HSX1216.0～HSX1216.15\|(% style="width:191px" %)HSX1224.0～HSX1224.15
	1477	\|(% style="width:102px" %)176～191\|(% style="width:185px" %)HSX1217.0～HSX1217.15\|(% style="width:191px" %)HSX1225.0～HSX1225.15
	1478	\|(% style="width:102px" %)192～207\|(% style="width:185px" %)HSX1218.0～HSX1218.15\|(% style="width:191px" %)HSX1226.0～HSX1226.15
	1479	\|(% style="width:102px" %)208～223\|(% style="width:185px" %)HSX1219.0～HSX1219.15\|(% style="width:191px" %)HSX1227.0～HSX1227.15
	1480	\|(% style="width:102px" %)224～239\|(% style="width:185px" %)HSX1220.0～HSX1220.15\|(% style="width:191px" %)HSX1228.0～HSX1228.15
	1481	\|(% style="width:102px" %)240～255\|(% style="width:185px" %)HSX1221.0～HSX1221.15\|(% style="width:191px" %)HSX1229.0～HSX1229.15
	1482	\|(% colspan="1" rowspan="16" style="width:135px" %)6\|(% style="width:102px" %)0～15\|(% style="width:185px" %)HSX630.0～HSX630.15\|(% style="width:191px" %)HSX638.0～HSX638.15
	1483	\|(% style="width:102px" %)16～31\|(% style="width:185px" %)HSX631.0～HSX631.15\|(% style="width:191px" %)HSX639.0～HSX639.15
	1484	\|(% style="width:102px" %)32～47\|(% style="width:185px" %)HSX632.0～HSX632.15\|(% style="width:191px" %)HSX640.0～HSX640.15
	1485	\|(% style="width:102px" %)48～63\|(% style="width:185px" %)HSX633.0～HSX633.15\|(% style="width:191px" %)HSX641.0～HSX641.15
	1486	\|(% style="width:102px" %)64～79\|(% style="width:185px" %)HSX634.0～HSX634.15\|(% style="width:191px" %)HSX642.0～HSX642.15
	1487	\|(% style="width:102px" %)80～95\|(% style="width:185px" %)HSX635.0～HSX635.15\|(% style="width:191px" %)HSX643.0～HSX643.15
	1488	\|(% style="width:102px" %)96～111\|(% style="width:185px" %)HSX636.0～HSX636.15\|(% style="width:191px" %)HSX644.0～HSX644.15
	1489	\|(% style="width:102px" %)112～127\|(% style="width:185px" %)HSX637.0～HSX637.15\|(% style="width:191px" %)HSX645.0～HSX645.15
	1490	\|(% style="width:102px" %)128～143\|(% style="width:185px" %)HSX1230.0～HSX1230.15\|(% style="width:191px" %)HSX1238.0～HSX1238.15
	1491	\|(% style="width:102px" %)144～159\|(% style="width:185px" %)HSX1231.0～HSX1231.15\|(% style="width:191px" %)HSX1239.0～HSX1239.15
	1492	\|(% style="width:102px" %)160～175\|(% style="width:185px" %)HSX1232.0～HSX1232.15\|(% style="width:191px" %)HSX1240.0～HSX1240.15
	1493	\|(% style="width:102px" %)176～191\|(% style="width:185px" %)HSX1233.0～HSX1233.15\|(% style="width:191px" %)HSX1241.0～HSX1241.15
	1494	\|(% style="width:102px" %)192～207\|(% style="width:185px" %)HSX1234.0～HSX1234.15\|(% style="width:191px" %)HSX1242.0～HSX1242.15
	1495	\|(% style="width:102px" %)208～223\|(% style="width:185px" %)HSX1235.0～HSX1235.15\|(% style="width:191px" %)HSX1243.0～HSX1243.15
	1496	\|(% style="width:102px" %)224～239\|(% style="width:185px" %)HSX1236.0～HSX1236.15\|(% style="width:191px" %)HSX1244.0～HSX1244.15
	1497	\|(% style="width:102px" %)240～255\|(% style="width:185px" %)HSX1237.0～HSX1237.15\|(% style="width:191px" %)HSX1245.0～HSX1245.15
	1498	\|(% colspan="1" rowspan="16" style="width:135px" %)7\|(% style="width:102px" %)0～15\|(% style="width:185px" %)HSX646.0～HSX646.15\|(% style="width:191px" %)HSX654.0～HSX654.15
	1499	\|(% style="width:102px" %)16～31\|(% style="width:185px" %)HSX647.0～HSX647.15\|(% style="width:191px" %)HSX655.0～HSX655.15
	1500	\|(% style="width:102px" %)32～47\|(% style="width:185px" %)HSX648.0～HSX648.15\|(% style="width:191px" %)HSX656.0～HSX656.15
	1501	\|(% style="width:102px" %)48～63\|(% style="width:185px" %)HSX649.0～HSX649.15\|(% style="width:191px" %)HSX657.0～HSX657.15
	1502	\|(% style="width:102px" %)64～79\|(% style="width:185px" %)HSX650.0～HSX650.15\|(% style="width:191px" %)HSX658.0～HSX658.15
	1503	\|(% style="width:102px" %)80～95\|(% style="width:185px" %)HSX651.0～HSX651.15\|(% style="width:191px" %)HSX659.0～HSX659.15
	1504	\|(% style="width:102px" %)96～111\|(% style="width:185px" %)HSX652.0～HSX652.15\|(% style="width:191px" %)HSX660.0～HSX660.15
	1505	\|(% style="width:102px" %)112～127\|(% style="width:185px" %)HSX653.0～HSX653.15\|(% style="width:191px" %)HSX661.0～HSX661.15
	1506	\|(% style="width:102px" %)128～143\|(% style="width:185px" %)HSX1246.0～HSX1246.15\|(% style="width:191px" %)HSX1254.0～HSX1254.15
	1507	\|(% style="width:102px" %)144～159\|(% style="width:185px" %)HSX1247.0～HSX1247.15\|(% style="width:191px" %)HSX1255.0～HSX1255.15
	1508	\|(% style="width:102px" %)160～175\|(% style="width:185px" %)HSX1248.0～HSX1248.15\|(% style="width:191px" %)HSX1256.0～HSX1256.15
	1509	\|(% style="width:102px" %)176～191\|(% style="width:185px" %)HSX1249.0～HSX1249.15\|(% style="width:191px" %)HSX1257.0～HSX1257.15
	1510	\|(% style="width:102px" %)192～207\|(% style="width:185px" %)HSX1250.0～HSX1250.15\|(% style="width:191px" %)HSX1258.0～HSX1258.15
	1511	\|(% style="width:102px" %)208～223\|(% style="width:185px" %)HSX1251.0～HSX1251.15\|(% style="width:191px" %)HSX1259.0～HSX1259.15
	1512	\|(% style="width:102px" %)224～239\|(% style="width:185px" %)HSX1252.0～HSX1252.15\|(% style="width:191px" %)HSX1260.0～HSX1260.15
	1513	\|(% style="width:102px" %)240～255\|(% style="width:185px" %)HSX1253.0～HSX1253.15\|(% style="width:191px" %)HSX1261.0～HSX1261.15
	1514	\|(% colspan="1" rowspan="16" style="width:135px" %)8\|(% style="width:102px" %)0～15\|(% style="width:185px" %)HSX662.0～HSX662.15\|(% style="width:191px" %)HSX670.0～HSX670.15
	1515	\|(% style="width:102px" %)16～31\|(% style="width:185px" %)HSX663.0～HSX663.15\|(% style="width:191px" %)HSX671.0～HSX671.15
	1516	\|(% style="width:102px" %)32～47\|(% style="width:185px" %)HSX664.0～HSX664.15\|(% style="width:191px" %)HSX672.0～HSX672.15
	1517	\|(% style="width:102px" %)48～63\|(% style="width:185px" %)HSX665.0～HSX665.15\|(% style="width:191px" %)HSX673.0～HSX673.15
	1518	\|(% style="width:102px" %)64～79\|(% style="width:185px" %)HSX666.0～HSX666.15\|(% style="width:191px" %)HSX674.0～HSX674.15
	1519	\|(% style="width:102px" %)80～95\|(% style="width:185px" %)HSX667.0～HSX667.15\|(% style="width:191px" %)HSX675.0～HSX675.15
	1520	\|(% style="width:102px" %)96～111\|(% style="width:185px" %)HSX668.0～HSX668.15\|(% style="width:191px" %)HSX676.0～HSX676.15
	1521	\|(% style="width:102px" %)112～127\|(% style="width:185px" %)HSX669.0～HSX669.15\|(% style="width:191px" %)HSX677.0～HSX677.15
	1522	\|(% style="width:102px" %)128～143\|(% style="width:185px" %)HSX1262.0～HSX1262.15\|(% style="width:191px" %)HSX1270.0～HSX1270.15
	1523	\|(% style="width:102px" %)144～159\|(% style="width:185px" %)HSX1263.0～HSX1263.15\|(% style="width:191px" %)HSX1271.0～HSX1271.15
	1524	\|(% style="width:102px" %)160～175\|(% style="width:185px" %)HSX1264.0～HSX1264.15\|(% style="width:191px" %)HSX1272.0～HSX1272.15
	1525	\|(% style="width:102px" %)176～191\|(% style="width:185px" %)HSX1265.0～HSX1265.15\|(% style="width:191px" %)HSX1273.0～HSX1273.15
	1526	\|(% style="width:102px" %)192～207\|(% style="width:185px" %)HSX1266.0～HSX1266.15\|(% style="width:191px" %)HSX1274.0～HSX1274.15
	1527	\|(% style="width:102px" %)208～223\|(% style="width:185px" %)HSX1267.0～HSX1267.15\|(% style="width:191px" %)HSX1275.0～HSX1275.15
	1528	\|(% style="width:102px" %)224～239\|(% style="width:185px" %)HSX1268.0～HSX1268.15\|(% style="width:191px" %)HSX1276.0～HSX1276.15
	1529	\|(% style="width:102px" %)240～255\|(% style="width:185px" %)HSX1269.0～HSX1269.15\|(% style="width:191px" %)HSX1277.0～HSX1277.15
	1530	\|(% rowspan="4" style="width:135px" %)9\|(% style="width:102px" %)0~~15\|(% style="width:185px" %)HSX678.0~~678.15\|(% style="width:191px" %)HSX686.0~~686.15
	1531	\|(% style="width:102px" %)16~~31\|(% style="width:185px" %)HSX679.0~~679.15\|(% style="width:191px" %)HSX687.0~~687.15
	1532	\|(% style="width:102px" %)32~~47\|(% style="width:185px" %)HSX680.0~~680.15\|(% style="width:191px" %)HSX688.0~~688.15
	1533	\|(% style="width:102px" %)48~~63\|(% style="width:185px" %)HSX681.0~~681.15\|(% style="width:191px" %)HSX689.0~~689.15
	1534	\|(% rowspan="4" style="width:135px" %)10\|(% style="width:102px" %)0~~15\|(% style="width:185px" %)HSX694.0~~694.15\|(% style="width:191px" %)HSX702.0~~702.15
	1535	\|(% style="width:102px" %)16~~31\|(% style="width:185px" %)HSX695.0~~695.15\|(% style="width:191px" %)HSX703.0~~703.15
	1536	\|(% style="width:102px" %)32~~47\|(% style="width:185px" %)HSX696.0~~696.15\|(% style="width:191px" %)HSX704.0~~704.15
	1537	\|(% style="width:102px" %)48~~63\|(% style="width:185px" %)HSX697.0~~697.15\|(% style="width:191px" %)HSX705.0~~705.15
	1538	\|(% rowspan="4" style="width:135px" %)11\|(% style="width:102px" %)0~~15\|(% style="width:185px" %)HSX710.0~~710.15\|(% style="width:191px" %)HSX718.0~~718.15
	1539	\|(% style="width:102px" %)16~~31\|(% style="width:185px" %)HSX711.0~~711.15\|(% style="width:191px" %)HSX719.0~~719.15
	1540	\|(% style="width:102px" %)32~~47\|(% style="width:185px" %)HSX712.0~~712.15\|(% style="width:191px" %)HSX720.0~~720.15
	1541	\|(% style="width:102px" %)48~~63\|(% style="width:185px" %)HSX713.0~~713.15\|(% style="width:191px" %)HSX721.0~~721.15
	1542	\|(% rowspan="4" style="width:135px" %)12\|(% style="width:102px" %)0~~15\|(% style="width:185px" %)HSX726.0~~726.15\|(% style="width:191px" %)HSX734.0~~734.15
	1543	\|(% style="width:102px" %)16~~31\|(% style="width:185px" %)HSX727.0~~727.15\|(% style="width:191px" %)HSX735.0~~735.15
	1544	\|(% style="width:102px" %)32~~47\|(% style="width:185px" %)HSX728.0~~728.15\|(% style="width:191px" %)HSX736.0~~736.15
	1545	\|(% style="width:102px" %)48~~63\|(% style="width:185px" %)HSX729.0~~729.15\|(% style="width:191px" %)HSX737.0~~737.15
	1546	\|(% rowspan="4" style="width:135px" %)13\|(% style="width:102px" %)0~~15\|(% style="width:185px" %)HSX742.0~~742.15\|(% style="width:191px" %)HSX750.0~~750.15
	1547	\|(% style="width:102px" %)16~~31\|(% style="width:185px" %)HSX743.0~~743.15\|(% style="width:191px" %)HSX751.0~~751.15
	1548	\|(% style="width:102px" %)32~~47\|(% style="width:185px" %)HSX744.0~~744.15\|(% style="width:191px" %)HSX752.0~~752.15
	1549	\|(% style="width:102px" %)48~~63\|(% style="width:185px" %)HSX745.0~~745.15\|(% style="width:191px" %)HSX753.0~~753.15
	1550	\|(% rowspan="4" style="width:135px" %)14\|(% style="width:102px" %)0~~15\|(% style="width:185px" %)HSX758.0~~758.15\|(% style="width:191px" %)HSX766.0~~766.15
	1551	\|(% style="width:102px" %)16~~31\|(% style="width:185px" %)HSX759.0~~759.15\|(% style="width:191px" %)HSX767.0~~767.15
	1552	\|(% style="width:102px" %)32~~47\|(% style="width:185px" %)HSX760.0~~760.15\|(% style="width:191px" %)HSX768.0~~768.15
	1553	\|(% style="width:102px" %)48~~63\|(% style="width:185px" %)HSX761.0~~761.15\|(% style="width:191px" %)HSX769.0~~769.15
	1554	\|(% rowspan="4" style="width:135px" %)15\|(% style="width:102px" %)0~~15\|(% style="width:185px" %)HSX774.0~~774.15\|(% style="width:191px" %)HSX782.0~~782.15
	1555	\|(% style="width:102px" %)16~~31\|(% style="width:185px" %)HSX775.0~~775.15\|(% style="width:191px" %)HSX783.0~~783.15
	1556	\|(% style="width:102px" %)32~~47\|(% style="width:185px" %)HSX776.0~~776.15\|(% style="width:191px" %)HSX784.0~~784.15
	1557	\|(% style="width:102px" %)48~~63\|(% style="width:185px" %)HSX777.0~~777.15\|(% style="width:191px" %)HSX785.0~~785.15
	1558	\|(% rowspan="4" style="width:135px" %)16\|(% style="width:102px" %)0~~15\|(% style="width:185px" %)HSX790.0~~790.15\|(% style="width:191px" %)HSX798.0~~798.15
	1559	\|(% style="width:102px" %)16~~31\|(% style="width:185px" %)HSX791.0~~791.15\|(% style="width:191px" %)HSX799.0~~799.15
	1560	\|(% style="width:102px" %)32~~47\|(% style="width:185px" %)HSX792.0~~792.15\|(% style="width:191px" %)HSX800.0~~800.15
	1561	\|(% style="width:102px" %)48~~63\|(% style="width:185px" %)HSX793.0~~793.15\|(% style="width:191px" %)HSX801.0~~801.15

Wiki source code of 13.HMI Internal Registers

Navigation

Table of Contents