Skip to Content

Wiki source code of 13 HMI Internal Registers

Version 5.1 by xingzhi lin on 2025/09/24 09:47
Hide last authors
Wecon 1.1 1 = **Introduction** =
2
3 HMI provide four types of HMI address for user. You can use them as temporary variables of the program. The use is consistent with the way access to the PLC register. You could also reference through the address, PIStudio provides three types of such memory.
4
5 *HSW, HDW, HUW, HAW are word address, HSX, HDX, HUX, HAX are bit address.
6
7 * **System data area (HSW): **A special register defined by the system.
8 * **Data storage area (HDW/HDX): **Users store user data.
9 * **System data area (HUW): **A special register defined by the system.
10 * **System Data (HAW)**: System register used for power-off save.
11 * **Recipe index area (RPW): **System register used for recipe index.
12
13 HMI internal registers are divided into bit address and word address, which can be accessed in two ways (take HDW as an example).
14
15 * Access as word with the prefix "HDW".
16 ** HDW0 means the 1st word of system data area. HDW1 means the 2nd word of system data area.
17 * Access as bit with the prefix "HDX".  The number before "." i".  The number before Access in bit with the prefix "HD".  The number before Access in bit with the prefix "HDX". The number before "." indicates the number of the word. The number after "." indicates the bit number of the word.
18 ** HDX1020.12 means to access the system data area in bit mode, the specific location is the 13th bit of the 1020 word.
19
20 (% class="box infomessage" %)
21 (((
22 **✎Note:**
23
24 * Addresses in HDX are the bits from words in HDW, so be careful when using addresses. For example, HDX1020.12 is the 13th bit to access the 1020 word. The value of this bit is the same as that of the word accessed through HDW001020. The 13th bit of this word is actually the same bit as HDX1020.12.
25 * The address of the bit address HDX is with a decimal point while word addresses are integers.
26 )))
27
28 = Address ranges table =
29
30 (% style="text-align:center" %)
31 [[image:6.png]]
32
33 = **Data storage area (HDW/HDX)** =
34
35 It is used to save the temporary data of project.
36
37 1. Access as word, and serial number range is from HDW0 to HDW299999.
38 1. Access as bit, and serial number range is from HDX0.0 to HDX299999.15.
39
40 = **Power-down save area (HAW/HAX)** =
41
42 It is system registers used for power-off save.
43
44 1. Access as word, and serial number range is from HAW0 to HAW199999.
45 1. Access as bit, and serial number range is from HAX0.0 to HAX199999.15.
46
47 (% class="box infomessage" %)
48 (((
49 **✎Note:**
50
51 * HAW/HAX is power-down retention. The register of this type is able to save the data before the power-down.
52 * To avoid possible device failure, do not immediately power off and reboot when configuring the power-down save addre
53 )))
54
55 = **Recipe index area (RPW)** =
56
57 It is system recipe data power-off save register. The range is from RPW000000 to RPW990450.
58
59 (% class="box infomessage" %)
60 (((
61 **✎Note:**
62
63 * RPW is power-down retention. The register of this type is able to save the data before the power-down.
64 * To avoid possible device failure, do not immediately power off and reboot when configuring the power-down save addre
65 )))
66
67 = **Single user data area (HUW/HUX)** =
68
69 It is used for system special registers (reserved by system).
70
71 1. Access as word, and serial number range is from HUW0 to HUW1599.
72 1. Access as bit, and serial number range is from HUX0.0 to HUX1599.15.
73
74 (% class="box infomessage" %)
75 (((
76 **✎Note:**
77
78 * HUW/HUX is a system special register, so please check the system special register list during use. Please use the address specified in the table and do not use the address which is not mentioned in the table.
79 )))
80
81 (% class="table-bordered" %)
82 |=**Special register address**|=**Description**|=**Function**
83 |=HUW0|Screen switch|A single terminal controls the screen switching, and all terminals do not affect each other.
84 |=HUW110~~HUW119|(% rowspan="26" %)Addresses of the built-in keyboard|The T9 input method stores the selected seria number length
85 |=HUW120~~HUW129|The T9 input method stores the selected Chinese Pinyin length
86 |=HUW135|Input method: first input
87 |=HUW136|Button: T9 Chinese Pinyin page
88 |=HUW137|Button: T9 Chinese characters page
89 |=HUW138|Button: symbol
90 |=HUW139|Button: switch
91 |=HUW140|Button: Chinese characters 1
92 |=HUW142|Button: Chinese characters 2
93 |=HUW144|Button: Chinese characters 3
94 |=HUW146|Button: Chinese characters 4
95 |=HUW148|Button: Chinese characters 5
96 |=HUW150|Button: Chinese characters 6
97 |=HUW152|Button: Chinese characters 7
98 |=HUW154|Button: Chinese characters 8
99 |=HUW156|Button: Chinese characters 9
100 |=HUW158|Button: Chinese characters 10
101 |=HUW160~~HUW169|Button: Chinese Pinyin 1
102 |=HUW170~~HUW179|Button: Chinese Pinyin 2
103 |=HUW180~~HUW189|Button: Chinese Pinyin 3
104 |=HUW190~~HUW199|Button: Chinese Pinyin 4
105 |=HUW200~~HUW699|Input method cache length
106 |=HUW700~~HUW749|Minimum value of the input method
107 |=HUW750~~HUW799|Maximum value of the input method
108 |=HUW800|Case switching of the input method
109 |=HUW801~~HUW900|Input method format cache length
110 |=HUW1000|(% rowspan="12" %)Addresses of user permission|OK (Sign in)
111 |=HUW1001|Result of operation
112 |=HUW1002~~1005|Old password
113 |=HUW1006~~1009|New password
114 |=HUW1010~~1013|Confirm password
115 |=HUW1014~~1029|New user name
116 |=HUW1030~~1157|States information of user permission
117 |=HUW1158~~1335|User name (Only or drop-down list object)
118 |=HUW1336~~1345|User name description or note
119 |=HUW1347|Hidden function configurations
120 |=HUW1348|Permission settings
121 |=HUW1349|Current user name
122 |=HUW1382|User sign in way|(((
123 * 0: Select the user name from drop-down list object for signing in
124 * 1: Enter the user name in Character Input/Display object for signing in (HUW1014)
125 )))
126 |=HUW1400|Time interval from last operation|(((
127 Shows how long the touch screen has not been clicked, in seconds. 32-bit unsigned integer
128
129 **✎Note:** Clicking by different users will only clear the corresponding register of the currently operating terminal, and the registers on other terminals (such as mobile phones, computers) will not be cleared.
130 )))
131 |=HUW1402|Keyboard note|It saves the text information of the keyboard notes when clicking object(HUW1402-HUW1433)
132 |=HUW1436|Current object level|Indicate current object security level
133
134 = **Special data area (HSW/HSX)** =
135
136 It is used for system special registers (reserved by system).
137
138 1. Access as word, and serial number range is from HSW0 to HSW49999. (HSW10000 to HSW19999 are the power-off storage areas)
139 1. Access as bit, and serial number range is from HSX0.0 to HSX49999.15.
140
141 (% class="box infomessage" %)
142 (((
143 **✎Note:**
144
145 * HSW / HSX are a system special register, so please check the system special register list during use. Please use the address specified in the table and do not use the address which is not mentioned in the table.
146 * To avoid possible device failure, do not immediately power off and reboot when configuring the power-down save address.
147 )))
148
Devin Chen 2.1 149 (% class="table-bordered" style="margin-left:auto; margin-right:auto; width:1024px" %)
Wecon 1.1 150 |=(% scope="row" style="width: 160px;" %)**Address**|=(% style="width: 282px;" %)**Function**|=(% style="width: 452px;" %)**Description**
151 |=(% style="width: 160px;" %)HSW0|(% style="width:282px" %)Language switch|(% style="width:452px" %)Multiple language could be set in the project, HMI support maximum 8 languages. (Power-down save supported)
152 |=(% style="width: 160px;" %)HSW1|(% style="width:282px" %)Beep frequency (Only valid in HMI V1.0 System)|(% style="width:452px" %)Frequency range: 0~~4000
153 |=(% style="width: 160px;" %)HSW2|(% style="width:282px" %)Beep volume (Only valid in HMI V1.0 System)|(% style="width:452px" %)Volume range: 0~~80
154 |=(% style="width: 160px;" %)HSW3|(% style="width:282px" %)Beep time|(% style="width:452px" %)Unit: ms
155 |=(% style="width: 160px;" %)HSW4|(% style="width:282px" %)Beep whether enable or not|(% style="width:452px" %)(((
156 * =0: Enable.
157 * =1: Disable.
158 )))
159 |=(% style="width: 160px;" %)HSW5|(% style="width:282px" %)(((
160 Alarm indicator
161 )))|(% style="width:452px" %)(((
162 * =0: Currently no alarm or all alarms have been off.
163 * =1: Currently alarm(s) still keep in on.
164 )))
165 |=(% style="width: 160px;" %)HSW6~~HSW7|(% style="width:282px" %)Number of alarms|(% style="width:452px" %)The number of alarm (it also includes the records of alarm confirmed)
166 |=(% style="width: 160px;" %)HSW8|(% style="width:282px" %)Number of unconfirmed history alarm|(% style="width:452px" %)The number of unconfirmed history alarm
167 |=(% style="width: 160px;" %)HSW9|(% style="width:282px" %)Time out prompt|(% style="width:452px" %)(((
168 * =0: Enable
169 * =1: Disable
170 )))
171 |=(% style="width: 160px;" %)HSW12|(% style="width:282px" %)Screen swicth|(% style="width:452px" %)(((
172 * = 0: Only HSW control the screen switch, and the sreens of all users will switch.
173 * = 1: Only HUW control the screen switch, and all users do not affect each other.
174 )))
175 |=(% style="width: 160px;" %)HSW13|(% style="width:282px" %)Screen switch register|(% style="width:452px" %)Equal to different values, the screen jumps to the corresponding screen number of the screen.
176 |=(% style="width: 160px;" %)HSW24|(% style="width:282px" %)Reboot HMI|=(% style="width: 452px;" %)1: Reboot
177 |=(% style="width: 160px;" %)HSW28|(% style="width:282px" %)Local time: year|(% style="width:452px" %)Range: 0~~9999 (system reserved)
178 |=(% style="width: 160px;" %)HSW29|(% style="width:282px" %)Local time: month|(% style="width:452px" %)Range: 01~~12 (system reserved)
179 |=(% style="width: 160px;" %)HSW30|(% style="width:282px" %)Local time: day|(% style="width:452px" %)Range: 01~~31 (system reserved)
180 |=(% style="width: 160px;" %)HSW31|(% style="width:282px" %)Local time: hour|(% style="width:452px" %)Range: 0~~23 (system reserved)
181 |=(% style="width: 160px;" %)HSW32|(% style="width:282px" %)Local time: minute|(% style="width:452px" %)Range: 0~~59 (system reserved)
182 |=(% style="width: 160px;" %)HSW33|(% style="width:282px" %)Local time: second|(% style="width:452px" %)Range: 0~~59 (system reserved)
183 |=(% style="width: 160px;" %)HSW34|(% style="width:282px" %)Local time: week|(% style="width:452px" %)(((
184 * =0: Sunday.
185 * =1: Monday.
186 * =2: Tuesday.
187 * =3: Wednesday.
188 * =4: Thursday.
189 * =5: Friday.
190 * =6: Saturday.
191 )))
192 |=(% style="width: 160px;" %)HSW39|(% style="width:282px" %)Beep type(Only valid in HMI V2.0 System)|(% style="width:452px" %)Type range: 1-5, Default is 1.
193 |=(% style="width: 160px;" %)HSW134|(% style="width:282px" %)(((
194 Whether the Script is read through
195
196
197 )))|(% style="width:452px" %)(((
198 (% class="box infomessage" %)
199 (((
200 **✎Note:** If want to read-only or write-only, please enable this settings.
201 )))
202
203 * =0: Read from HMI cache(Default)
204 * =1: Read from PLC directly
205 )))
206 |=(% style="width: 160px;" %)HSW135|(% style="width:282px" %)Confirm installment password|(% style="width:452px" %)Confirm button for installment password
207 |=(% style="width: 160px;" %)HSW151|(% style="width:282px" %)Installment due|(% style="width:452px" %)Number of days to installment due
208 |=(% style="width: 160px;" %)HSW185~~200|(% style="width:282px" %)Installment password|(% style="width:452px" %)Enter installment password
209 |=(% style="width: 160px;" %)HSW242|(% style="width:282px" %)(((
210 Prompt result of recipe operation
211
212 * Upload: Data is written from address to file
213 * Download: Data is written from a file to an address
214 )))|(% style="width:452px" %)(((
215 * =1: Download recipe, start
216 * =2: Download recipe, execution error
217 * =3: Download recipe, files don't exist
218 * =4: Download recipe, members don't exist
219 * =5: Download recipe, groups don't exist
220 * =6: Download recipe, success
221 * =7: Upload recipe, start
222 * =8: Upload recipe, execution error
223 * =9: Upload recipe, files don't exist
224 * =10: Upload recipe, members don't exist
225 * =11: Upload recipe, groups don't exist
226 * =12: Upload recipe, success
227 * =13: Insert recipe, start
228 * =14: Insert recipe, execution error
229 * =15: Insert recipe, files don't exist
230 * =16: Insert recipe, members don't exist
231 * =17: Insert recipe, groups don't exist
232 * =18: Insert recipe, success
233 * =19: Delete recipe, start
234 * =20: Delete recipe, execution error
235 * =21: Delete recipe, files don't exist
236 * =22: Delete recipe, members don't exist
237 * =23: Delete recipe, groups don't exist
238 * =24: Delete recipe, success
239 * =25: Delete and sort recipe, start
240 * =26: Delete recipe and sort, execution error
241 * =27: Delete recipe and sort, files don't exist
242 * =28: Delete recipe and sort, members don't exist
243 * =29: Delete recipe and sort, groups don't exist
244 * =30: Delete recipe and sort, success
245 * =37: CSV recipe files import successfully
246 * =38: CSV recipe files import failed.
247 )))
248 |=(% style="width: 160px;" %)HSW243|(% style="width:282px" %)Prompt result of recipe index|(% style="width:452px" %)(((
249 * =31: Recipe index, start
250 * =32: Recipe index, execution error
251 * =33: Recipe index, files don't exist
252 * =34: Recipe index, members don't exist
253 * =35: Recipe index, groups don't exist
254 * =36: Recipe index, success
255 )))
256 |=(% style="width: 160px;" %)HSW521|(% style="width:282px" %)Delete graph and alarm record|(% style="width:452px" %)(((
257 * =0: No operation
258 * =1: HSX521.0=1, delete all records.
259 * =2: HSX521.1=1, delete all trend graph.
260 * =4: HSX521.2=1, delete all alarms.
261 * =16: HSX521.4=1, delete history XY plot.
262 * =32: HSX521.5=1, delete data records in SD card or USB flash disk;(Please make a setting which is saved to USB flash disk or SD card in project setting).
263 * =64: HSX521.6=1, delete alarms records in SD card or USB flash disk; (Please make a setting which is saved to USB flash disk or SD card in project setting).
264 )))
265 |=(% style="width: 160px;" %)HSW522|(% style="width:282px" %)Copy and paste the alarm/data files in flash to the USB flash disk|(% style="width:452px" %)(((
266 * =0: No operation
267 * =1: HSX522.0=1, copy all record
268 * =2: HSX522.2=1, copy history XY trend graph
269 * =8: HSX522.3=1, copy alarm record
270 * =32: HSX522.5=1, copy recipe
271 )))
272 |=(% style="width: 160px;" %)HSW523|(% style="width:282px" %)Copy and paste the alarm/data files in flash to the SD card|(% style="width:452px" %)(((
273 * =0: No operation
274 * =1: HSX523.0=1, copy all record
275 * =4: HSX523.2=1, copy history XY trend graph
276 * =8: HSX523.3=1, copy alarm record
277 )))
278 |=(% style="width: 160px;" %)HSW524|(% style="width:282px" %)Copy and paste the alarm/data files in SD card to the USB flash disk|(% style="width:452px" %)(((
279 * =0: no operation
280 * =4: HSX524.2=1, copy history XY trend graph
281 * =8: HSX524.3=1, copy alarm record
282 * =16: HSX524.4=1, copy history alarm record
283 * =32: HSX524.5=1, copy data record
284 )))
285 |=(% style="width: 160px;" %)HSW525|(% style="width:282px" %)Copy and paste the alarm/data files in USB flash disk to SD card|(% style="width:452px" %)(((
286 * =0: no operation
287 * =4: HSX525.2=1, copy history XY trend graph
288 * =8: HSX525.3=1, copy alarm record
289 * =16: HSX525.4=1, copy history alarm record
290 * =32: HSX525.5= 1, copy data record
291 )))
292 |=(% style="width: 160px;" %)HSW526|(% style="width:282px" %)Delete file list|(% style="width:452px" %)(((
293 * =0: no operation
294 * =1: HSX526.0=1, delete designated file
295 * =2: HSX526.1=1, delete all files
296 )))
297 |=(% style="width: 160px;" %)HSW527|(% style="width:282px" %)Eject USB flash disk/SD card|(% style="width:452px" %)(((
298 * =0: No operation
299 * =1: Eject USB flash disk
300 * =2: Eject SD card
301 )))
302 |=(% style="width: 160px;" %)HSW528|(% style="width:282px" %)The state of USB flash disk|(% style="width:452px" %)(((
303 * =1: USB flash disk is detected
304 * =2: Ejecting USB flash disk, please waiting…
305 * =3: USB flash disk ejected
306 )))
307 |=(% style="width: 160px;" %)HSW529|(% style="width:282px" %)The state of SD card|(% style="width:452px" %)(((
308 * =1: SD card is detected
309 * =2: Ejecting SD card, please waiting…
310 * =3: SD card ejected
311 )))
312 |=(% style="width: 160px;" %)HSW550~~849|(% style="width:282px" %)Communication control|(% style="width:452px" %)For communication control and communication lamp (please refer to "[[Communication control>>https://docs.we-con.com.cn/bin/view/PIStudio/13.HMI%20internal%20registers/#HCommunicationcontrol]]" sector for detailed)
313 |=(% style="width: 160px;" %)HSW850|(% style="width:282px" %)(((
314 Network state
315
316 (4G, WIFI and Ethernet)
317 )))|(% style="width:452px" %)(((
318 In HMI V1.0
319
320 * =0: Network is disconnected.
321 * =1: only LAN connected, and APP can't access HMI.
322 * =2: WECON Cloud connected , APP and web could access HMI.
323
324 In HMI V2.0
325
326 * =0: Network is disconnected.
327 * =1: Network is connected.
328 )))
329 |=(% style="width: 160px;" %)HSW855|(% style="width:282px" %)Backlight Control|(% style="width:452px" %)(((
330 * HSX855.0=1: turn on the backlight and reset automatically after being triggered.
331 * HSX855.1=1: turn off the backlight and reset automatically after being triggered.
332 )))
333 |=(% style="width: 160px;" %)HSW856|(% style="width:282px" %)Whether to close the indirect screen when the current screen is switched to the other screen)|(% style="width:452px" %)(((
334 * =0: close the sub-screen, including the indirect screen;
335 * =1: not to close.
336 )))
337 |=(% style="width: 160px;" %)HSW857|(% style="width:282px" %)Permission in remote access (web page, mobile APP, cloud platform, etc.)|(% style="width:452px" %)(((
338 * =0: users could switch the screen, control the switch and update data in remote access.
339 * =1: users could only control function switch (only switch the screen), view data and switch state, but could not operate or update them.
340 * =2: users could neither operate the screen switch, nor switch operation and data modification, only view. (The ig series and 8000/9000 series with -R after system upgrade)
341 )))
342 |=(% style="width: 160px;" %)HSW860~~861|(% style="width:282px" %)Data partition remaining space|(% style="width:452px" %)Display the data partition remaining space, updated every minute, unit(**kB**)
343 |=(% style="width: 160px;" %)HSW880|(% style="width:282px" %)Enable data partition remaining space|(% style="width:452px" %)(((
344 ~=1, able to view the data partition remaining space from HSW860~~861.
345
346 ~=Other value except 1, disable the viewing function.
347 )))
348 |=(% style="width: 160px;" %)HSW881|(% style="width:282px" %)Storage of Record files|(% style="width:452px" %)(((
349 It is used for controlling saving alarm/data record files to U disk / SD card.
350
351 * = 0: Save to storage.
352 * = 1: Don't save to storage.
353 )))
354 |=(% style="width: 160px;" %)HSW882|(% style="width:282px" %)Storage device status|(% style="width:452px" %)(((
355 * HDX882.0=0 USB flash doesn't execute storage or storage finished.
356 * HDX882.0=1 USB flash is reading data, don't remove USB flash.
357 * HDX882.1=0 SD card doesn't execute storage or storage finished.
358 * HDX882.1=1 SD card is reading data, don't remove SD card.
359 )))
360 |=(% style="width: 160px;" %)HSW884|(% style="width:282px" %)Enter the system network configuration interface|(% style="width:452px" %)(((
361 * = 0: Do not enter the network configuration interface
362 * = 1: Enter the system network configuration interface.
363 ** ig series HMI only supports to enter the system interface
364
365 )))
366 |=(% style="width: 160px;" %)HSW885|(% style="width:282px" %)When the control object hides the address is read failed (communication failure), set the display mode of the object|(% style="width:452px" %)(((
367 * = 0: displayed by object setting.
368 * = 1: control address read failure, the address control of all objects is hidden, not displayed.
369 * = 2: control address read failure, the address control of all objects is displayed, not hidden.
370 )))
371 |=(% style="width: 160px;" %)HSW893|(% style="width:282px" %)(((
372 User Permission Control Address, same as HUW1000 feature, please refer to chapter "[[User Permission>>http://13.229.109.52:8080/wiki/pistudio/view/Helps/08.Basic%20Function/#HUserPermission]]"
373
374 **✎Note: **This address can only take effect when it is operated in the real HMI, and the operation is invalid on Web/App side.
375 )))|(% style="width:452px" %)(((
376 * =1: User Log in
377 * =2: Change User password
378 * =3: User Log out
379 * =4: New user
380 * =5: Delete user
381 * =6: Add user rights
382 * =8: Add Hide features
383 * =9: Delete Profile
384 * =10: Export Profile
385 * =11: Import profile
386 * =12: Export log file
387 * =13: Delete log file
388 )))
389 |=(% style="width: 160px;" %)HSW900|(% style="width:282px" %)Quick update frequency settings for objects|(% style="width:452px" %)(((
390 Valid when the object is enabled for "quick update". Default: 5.
391
392 Range: 1 (fastest) - 50 (slowest)
393 )))
394 |=(% style="width: 160px;" %)HSW920|(% style="width:282px" %)Static mode Maximum periods|(% style="width:452px" %)Numeric Input/ Display (range: 0-12)
395 |=(% style="width: 160px;" %)HSW921 ~~ 924|(% style="width:282px" %)Static mode Admin key|(% style="width:452px" %)Character Input/ Display (length: 8)
396 |=(% style="width: 160px;" %)HSW925 ~~ 928|(% style="width:282px" %)1^^st^^ period key (Static mode)|(% style="width:452px" %)Character Input/ Display (length: 8)
397 |=(% style="width: 160px;" %)HSW929 ~~ 933|(% style="width:282px" %)1^^st^^ expiry time (Static mode)|(% style="width:452px" %)Numeric Input/ Display (YYYYMMDDHHMM)
398 |=(% style="width: 160px;" %)HSW935 ~~ 938|(% style="width:282px" %)2^^nd^^ period key (Static mode)|(% style="width:452px" %)Character Input/ Display (length: 8)
399 |=(% style="width: 160px;" %)HSW939 ~~ 943|(% style="width:282px" %)2^^nd ^^expiry time (Static mode)|(% style="width:452px" %)Numeric Input/ Display (YYYYMMDDHHMM)
400 |=(% style="width: 160px;" %)HSW945 ~~ 948|(% style="width:282px" %)3^^rd^^ period key (Static mode)|(% style="width:452px" %)Character Input/ Display (length: 8)
401 |=(% style="width: 160px;" %)HSW949 ~~ 953|(% style="width:282px" %)3^^rd ^^expiry time (Static mode)|(% style="width:452px" %)Numeric Input/ Display (YYYYMMDDHHMM)
402 |=(% style="width: 160px;" %)HSW955 ~~ 958|(% style="width:282px" %)4^^th^^ period key (Static mode)|(% style="width:452px" %)Character Input/ Display (length: 8)
403 |=(% style="width: 160px;" %)HSW959 ~~ 963|(% style="width:282px" %)4^^th ^^expiry time (Static mode)|(% style="width:452px" %)Numeric Input/ Display (YYYYMMDDHHMM)
404 |=(% style="width: 160px;" %)HSW965 ~~ 968|(% style="width:282px" %)5^^th^^ period key (Static mode)|(% style="width:452px" %)Character Input/ Display (length: 8)
405 |=(% style="width: 160px;" %)HSW969 ~~ 973|(% style="width:282px" %)5^^th ^^expiry time (Static mode)|(% style="width:452px" %)Numeric Input/ Display (YYYYMMDDHHMM)
406 |=(% style="width: 160px;" %)HSW975 ~~ 978|(% style="width:282px" %)6^^th^^ period key (Static mode)|(% style="width:452px" %)Character Input/ Display (length: 8)
407 |=(% style="width: 160px;" %)HSW979 ~~ 983|(% style="width:282px" %)6^^th ^^expiry time (Static mode)|(% style="width:452px" %)Numeric Input/ Display (YYYYMMDDHHMM)
408 |=(% style="width: 160px;" %)HSW985 ~~ 988|(% style="width:282px" %)7^^th^^ period key (Static mode)|(% style="width:452px" %)Character Input/ Display (length: 8)
409 |=(% style="width: 160px;" %)HSW989 ~~ 993|(% style="width:282px" %)7^^th ^^expiry time (Static mode)|(% style="width:452px" %)Numeric Input/ Display (YYYYMMDDHHMM)
410 |=(% style="width: 160px;" %)HSW995 ~~ 998|(% style="width:282px" %)8^^th^^ period key (Static mode)|(% style="width:452px" %)Character Input/ Display (length: 8)
411 |=(% style="width: 160px;" %)HSW999 ~~ 1003|(% style="width:282px" %)8^^th ^^expiry time (Static mode)|(% style="width:452px" %)Numeric Input/ Display (YYYYMMDDHHMM)
412 |=(% style="width: 160px;" %)HSW1005 ~~1008|(% style="width:282px" %)9^^th^^ period key (Static mode)|(% style="width:452px" %)Character Input/ Display (length: 8)
413 |=(% style="width: 160px;" %)HSW1009 ~~ 1013|(% style="width:282px" %)9^^th ^^expiry time (Static mode)|(% style="width:452px" %)Numeric Input/ Display (YYYYMMDDHHMM)
414 |=(% style="width: 160px;" %)HSW1015 ~~1018|(% style="width:282px" %)10^^th^^ period key (Static mode)|(% style="width:452px" %)Character Input/ Display (length: 8)
415 |=(% style="width: 160px;" %)HSW1019 ~~ 1023|(% style="width:282px" %)10^^th ^^expiry time (Static mode)|(% style="width:452px" %)Numeric Input/ Display (YYYYMMDDHHMM)
416 |=(% style="width: 160px;" %)HSW1025 ~~1028|(% style="width:282px" %)11^^th^^ period key (Static mode)|(% style="width:452px" %)Character Input/ Display (length: 8)
417 |=(% style="width: 160px;" %)HSW1029 ~~ 1033|(% style="width:282px" %)11^^th ^^expiry time (Static mode)|(% style="width:452px" %)Numeric Input/ Display (YYYYMMDDHHMM)
418 |=(% style="width: 160px;" %)HSW1035 ~~1038|(% style="width:282px" %)12^^th^^ period key (Static mode)|(% style="width:452px" %)Character Input/ Display (length: 8)
419 |=(% style="width: 160px;" %)HSW1039 ~~ 1043|(% style="width:282px" %)12^^th ^^expiry time (Static mode)|(% style="width:452px" %)Numeric Input/ Display (YYYYMMDDHHMM)
420 |=(% style="width: 160px;" %)HSW1046|(% style="width:282px" %)Current period (Static mode)|(% style="width:452px" %)Current period (Range 1-13)
421 |=(% style="width: 160px;" %)HSW1047|(% style="width:282px" %)Save settings (Static mode)|(% style="width:452px" %)(((
422 * HSX1047.0=1: Save static installment information
423 * HSX1047.1=1: Write installment information to registers
424 )))
425 |=(% style="width: 160px;" %)HSW1050~~HSW1065|(% style="width:282px" %)The recipe name that can input csv format|(% style="width:452px" %)Input CSV format recipe file name through "Character Input/ Display".(This function should be used in combination with the recipefunction)
426 |=(% style="width: 160px;" %)HSW1066|(% style="width:282px" %)Configure the type of the CSV file imported|(% style="width:452px" %)(((
427 The CSV file type imported (This function should be used in combination with the recipe function)
428
429 * =0: Import customed CSV file. The data in the file is valid.
430 * =1: Import ordinary recipe files of regular series HMI. The 1st row of the file is invalid.
431 * =2: Import special recipe files of regular series HMI. The 1st and 3nd rows and the 1st colume of the file is invalid.
432 )))
433 |=(% style="width: 160px;" %)HSW1067|(% style="width:282px" %)Location where the CSV file is saved|(% style="width:452px" %)(((
434 Set the path of CSV file (This function should be used in combination with the recipe function)
435
436 * =0: In the CsvFile directory of the USB stick
437 * =1: In the CsvFile directory of the SD card
438 )))
439 |=(% style="width: 160px;" %)HSW1070|(% style="width:282px" %)The time interval (seconds) since the last time the screen was clicked|(% style="width:452px" %)(((
440 Shows how long the current screen has not been clicked, using a decimal unsigned double word (Numeric Input/ Display).
441
442 (% class="box infomessage" %)
443 (((
444 **✎Note: **This register is cleared to zero regardless of which user clicks on the screen.
445 )))
446 )))
447 |=(% style="width: 160px;" %)HSW1073|(% style="width:282px" %)Corresponding key value from keyboard|(% style="width:452px" %)Display the key value of the currently pressed key, the key value is shown in Table 1 (not updated when the character input display is being input)
448 |=(% style="width: 160px;" %)HSW1074|(% style="width:282px" %)Keyboard key status|(% style="width:452px" %)Display the current button status (not updated when the numeric input display is being input)(((
449 * =0: key release
450 * =1: key press
451 * =2: Long press the button
452 )))
453 |=(% style="width: 160px;" %)HSW1075|(% style="width:282px" %)Cursor speed|(% style="width:452px" %)Control the cursor movement speed, the range is 0～100, the default is 20
454 |=(% style="width: 160px;" %)HSW1076|(% style="width:282px" %)Cursor x coordinate value|(% style="width:452px" %)Record the x value at the current position of the cursor, range: 0 to screen width -1
455 |=(% style="width: 160px;" %)HSW1077|(% style="width:282px" %)Cursor y coordinate value|(% style="width:452px" %)Record the y value at the current position of the cursor, range: 0 to screen height-1
456 |=(% style="width: 160px;" %)HSW1078|(% style="width:282px" %)Corresponding ASCII code for keyboard keys|(% style="width:452px" %)Only the ASCII value of letters, numbers, and symbols are displayed, and the ASCII value of the function button is not displayed.
457 |=(% style="width: 160px;" %)HSW1079|(% style="width:282px" %)Trigger to set the cursor position and set the Enter key mode|(% style="width:452px" %)(((
458 * HSX1079.0=1: Set the cursor position according to the cursor xy register value;
459 * HSX1079.1=0: When the numeric/character input display is being input, press Enter to end the input, no value/text part is being input, Enter is a normal click;
460 * HSX1079.1=1 Regardless of whether the numeric/character component is inputting the Enter key, only normal click is performed, and the keyboard end input is not performed.
461 )))
462 |=(% style="width: 160px;" %)HSW1083|(% style="width:282px" %)Naming method for printing object screenshots|(% style="width:452px" %)(((
463 Example: The time is 2019-01-04 14:29:10 (523 milliseconds), the screen number is 0, and the object ID is 2.
464
465 * =0: Use year, month, day, hour, minute, second, millisecond, screen number, part number to name, such as: 2019010414291052302.bmp.
466 * =1: Name using year, month, day, hour, minute, and second.
467
468 For example: 20190104142910.bmp.
469 )))
470 |=(% style="width: 160px;" %)HSW1086|(% style="width:282px" %)Control address mapping polling cycle, unit: ms|(% style="width:452px" %)(((
471 Address mapping polling cycle, effective range: 40~~1000ms, default: 300ms.
472
473 * When the set value is greater than 1000, the value is 1000.
474 * When the set value is lower than 40, it changes to the default value 300
475 )))
476 |=(% style="width: 160px;" %)HSW1087|(% style="width:282px" %)Control write interval in address mapping|(% style="width:452px" %)(((
477 After reading data to the device for N times, Perform an address mapping write operation. N is the interval value. The effective range: 0~~5, and default is 2.
478
479 When N more than 5, it is 5.
480
481 0 is the fastest and 5 is the slowest.
482 )))
483 |=(% style="width: 160px;" %)HSW1088|(% style="width:282px" %)Control the write interval of script|(% style="width:452px" %)(((
484 After reading data to the device for N times, Perform a script write operation. N is the interval value. The effective range: 0~~5, and default is 2.
485
486 When N more than 5, it is 5.
487
488 0 is the fastest and 5 is the slowest.
489 )))
490 |=(% style="width: 160px;" %)HSW1089|(% style="width:282px" %)Control interval of read through|(% style="width:452px" %)(((
491 After reading data to the device for N times, Perform a read through operation. N is the interval value. The effective range: 0~~5, and default is 2.
492
493 When N more than 5, it is 5.
494
495 0 is the fastest and 5 is the slowest.
496 )))
497 |=(% style="width: 160px;" %)HSW1100|(% colspan="1" rowspan="4" style="width:282px" %)Set the Master IP for Multi-link|(% style="width:452px" %)High word 1 for Master IP address of multi-link
498 |=(% style="width: 160px;" %)HSW1101|(% style="width:452px" %)High word 2 for Master IP address of multi-link
499 |=(% style="width: 160px;" %)HSW1102|(% style="width:452px" %)High word 3 for Master IP address of multi-link
500 |=(% style="width: 160px;" %)HSW1103|(% style="width:452px" %)High word 4 for Master IP address of multi-link
501 |=(% style="width: 160px;" %)HSW1104|(% style="width:282px" %)Control connection to Master or not for Multi-link slave device|(% style="width:452px" %)(((
502 * =1: Connect to the Master
503 * =0: Do not connect to Master
504 )))
505 |=(% style="width: 160px;" %)HSW1141|(% style="width:282px" %)Release alarm|(% style="width:452px" %)(((
506 * =0, Default value
507 * =1, Release the alarm generated before the last power-down when starting up
508 )))
509 |=(% style="width: 160px;" %)HSW1200|(% colspan="1" rowspan="2" style="width:282px" %)TSAP settings for HMI in the Siemens LOGO! 8 protocol(ig series or HMI V2.0)|(% style="width:452px" %)HMI local TSAP, which corresponds to the remote TSAP of PLC
510 |=(% style="width: 160px;" %)HSW1201|(% style="width:452px" %)HMI remote TSAP, which corresponds to the local TSAP of PLC
511 |=(% style="width: 160px;" %)HSW1450|(% style="width:282px" %)Enable objects level password function|(% style="width:452px" %)(((
512 * =0, Disable
513 * =1, Enable
514 )))
515 |=(% style="width: 160px;" %)HSW1451|(% style="width:282px" %)Whether the object level passwords are independent of each other|(% style="width:452px" %)(((
516 * =0, No, high-level passwords can unlock low-level
517 * = 1, Yes, high-level passwords cannot unlock low-level
518 )))
519 |=(% style="width: 160px;" %)HSW1452|(% style="width:282px" %)Initialization level|(% style="width:452px" %)Initialization level while HMI running
520 |=(% style="width: 160px;" %)HSW1454~~1457|(% style="width:282px" %)Password for Level 1|(% style="width:452px" %)(((
521 Display password for level 1, using character input object, up to 8 characters (numbers, letters (case sensitive))
522 )))
523 |=(% style="width: 160px;" %)HSW1458~~1461|(% style="width:282px" %)Password for Level 2|(% style="width:452px" %)Display password for level 2, using character input object, up to 8 characters (numbers, letters (case sensitive))
524 |=(% style="width: 160px;" %)HSW1462~~1465|(% style="width:282px" %)Password for Level 3|(% style="width:452px" %)Display password for level 3, using character input object, up to 8 characters (numbers, letters (case sensitive))
525 |=(% style="width: 160px;" %)HSW1466~~1469|(% style="width:282px" %)Password for Level 4|(% style="width:452px" %)Display password for level 4, using character input object, up to 8 characters (numbers, letters (case sensitive))
526 |=(% style="width: 160px;" %)HSW1470~~1473|(% style="width:282px" %)Password for Level 5|(% style="width:452px" %)Display password for level 5, using character input object, up to 8 characters (numbers, letters (case sensitive))
527 |=(% style="width: 160px;" %)HSW1474~~1477|(% style="width:282px" %)Password for Level 6|(% style="width:452px" %)Display password for level 6, using character input object, up to 8 characters (numbers, letters (case sensitive))
528 |=(% style="width: 160px;" %)HSW1478~~1481|(% style="width:282px" %)Password for Level 7|(% style="width:452px" %)Display password for level 7, using character input object, up to 8 characters (numbers, letters (case sensitive))
529 |=(% style="width: 160px;" %)HSW1482~~1485|(% style="width:282px" %)Password for Level 8|(% style="width:452px" %)Display password for level 8, using character input object, up to 8 characters (numbers, letters (case sensitive))
530 |=(% style="width: 160px;" %)HSW1486~~1489|(% style="width:282px" %)Password for Level 9|(% style="width:452px" %)Display password for level 9, using character input object, up to 8 characters (numbers, letters (case sensitive))
531 |=(% style="width: 160px;" %)HSW1490~~1493|(% style="width:282px" %)Password for Level 10|(% style="width:452px" %)Display password for level 10, using character input object, up to 8 characters (numbers, letters (case sensitive))
532 |=(% style="width: 160px;" %)HSW1494~~1497|(% style="width:282px" %)Password for Level 11|(% style="width:452px" %)Display password for level 11, using character input object, up to 8 characters (numbers, letters (case sensitive))
533 |=(% style="width: 160px;" %)HSW1498~~1501|(% style="width:282px" %)Password for Level 12|(% style="width:452px" %)Display password for level 12, using character input object, up to 8 characters (numbers, letters (case sensitive))
534 |=(% style="width: 160px;" %)HSW1502|(% style="width:282px" %)Modify password for object level|(% style="width:452px" %)(((
535 * HSX1502.0=1: Modification comfirmed. Save the data of HSW1450~~HSW1501 to a file for immediate effect.
536 * HSX1502.1=1:Modification cancelled. Restore the current data of hSW1450-HSW1501 to the data saved in the file last time.
537 )))
538 |=(% style="width: 160px;" %)HSW1509|(% style="width:282px" %)Curve width|(% style="width:452px" %)(((
539 * =0: Use the curve width set by project default.
540 * =1 to 10: use special register to set curve width.
541 )))
542 |=(% style="width: 160px;" %)HSW1603|(% style="width:282px" %)Number of current unreleased alarms|(% style="width:452px" %)The number of current unreleased alarms in alarm record file.
543 |=(% style="width: 160px;" %)HSW1604|(% style="width:282px" %)The auxiliary judgment address when the control bit in the Object Lock fails to be read|(% style="width:452px" %)(((
544 * =0: The auxiliary address is invalid.
545 * =1: When the communication fails, lock the object.
546 * =2: When the communication fails, unlock the object.
547 * =Others: The auxiliary address is invalid.
548 )))
549 |=(% style="width: 160px;" %)HSW1605|(% style="width:282px" %)BCD format natural decimal control|(% style="width:452px" %)(((
550 Whether to display natural decimals with decimal point in BCD format:
551
552 * 0=Not enabled.
553 * 1=Enable.
554
555 (For example, 56.20 is displayed as 56.2, 33.00 is displayed as 33)
556 )))
557 |=(% style="width: 160px;" %)HSW1606|(% style="width:282px" %)User permission modification control|(% style="width:452px" %)(((
558 * =0: Ordinary users are allowed to modify permissions and other operations
559 * =1: Only the administrator can operate (default is 0)
560 )))
561 |=(% style="width: 160px;" %)HSW1607|(% style="width:282px" %)The spacing value among the drop-down items of the drop-down list|(% style="width:452px" %)10 to 50 is effective, such as: 23 is 2.3 times the height of the object.
562 |=(% style="width: 160px;" %)HSW1611|(% style="width:282px" %)(((
563 Traditional recipe transfer
564 )))|(% style="width:452px" %)(((
565 * =1: download traditional recipe.
566 * =2: upload the traditional recipe.
567 )))
568 |=(% style="width: 160px;" %)HSW1612|(% style="width:282px" %)Traditional Recipe group number|(% style="width:452px" %)Traditional Recipe group number
569 |=(% style="width: 160px;" %)HSW1613|(% style="width:282px" %)Display the status of network card|(% style="width:452px" %)(((
570 * =1: Normal
571 * =Others: Abnormal
572 )))
573 |=(% style="width: 160px;" %)HSW1614~~1623|(% style="width:282px" %)Download speed per second|(% style="width:452px" %)Display the download speed per second. (The value is string)
574 |=(% style="width: 160px;" %)HSW1624~~1633|(% style="width:282px" %)Upnload speed per second|(% style="width:452px" %)Display the upload speed per second. (The value is string)
575 |=(% style="width: 160px;" %)HSW1634~~1643|(% style="width:282px" %)Flow consumption rate|(% style="width:452px" %)Display the total flow rate per second (The value is string)
576 |=(% style="width: 160px;" %)HSW1644~~1653|(% style="width:282px" %)Download flow consumption after power on|(% style="width:452px" %)Display the download flow consumption after power on (The value is string)
577 |=(% style="width: 160px;" %)HSW1654~~1663|(% style="width:282px" %)Upload flow consumption after power on|(% style="width:452px" %)Display the upload flow consumption after power on (The value is string)
578 |=(% style="width: 160px;" %)HSW1664~~1673|(% style="width:282px" %)Total flow consumption after power on|(% style="width:452px" %)Display the total flow consumption after power on (download and upload). (The value is string)
579 |=(% style="width: 160px;" %)HSW1674~~1683|(% style="width:282px" %)Historical flow consumption|(% style="width:452px" %)Display historical flow consumption (download and upload). (The value is string)
580 |=(% style="width: 160px;" %)HSW1684~~1693|(% style="width:282px" %)Flow consumption in 10 minutes|(% style="width:452px" %)Flow consumption in 10 minutes (download and upload). (The value is string)
581 |=(% style="width: 160px;" %)HSW1694~~1703|(% style="width:282px" %)Flow consumption in 30 minutes|(% style="width:452px" %)Flow consumption in 30 minutes (download and upload). (The value is string)
582 |=(% style="width: 160px;" %)HSW1704~~1713|(% style="width:282px" %)Flow consumption in 3 hours|(% style="width:452px" %)Flow consumption in 3 hours (download and upload). (The value is string)
583 |=(% style="width: 160px;" %)HSW1715|(% style="width:282px" %)Reset flow|(% style="width:452px" %)(((
584 * =1: Clear historical flow data and restart the count.
585 * =Others: Invalid
586 )))
587 |=(% style="width: 160px;" %)HSW1719|(% style="width:282px" %)Network status of Ethernet connnecting to server|(% style="width:452px" %)(((
588 * =0: Server connection exception
589 * =1: Server connection is OK
590 )))
591 |=(% style="width: 160px;" %)HSW1720|(% colspan="1" rowspan="12" style="width:282px" %)Related IP register in WIFI network status (It is valid when HMI is connected to WIFI)|(% style="width:452px" %)Local IP address high byte 1
592 |=(% style="width: 160px;" %)HSW1721|(% style="width:452px" %)Local IP address high byte 2
593 |=(% style="width: 160px;" %)HSW1722|(% style="width:452px" %)Local IP address high byte 3
594 |=(% style="width: 160px;" %)HSW1723|(% style="width:452px" %)Local IP address high byte 4
595 |=(% style="width: 160px;" %)HSW1724|(% style="width:452px" %)Local mask IP address high byte 1
596 |=(% style="width: 160px;" %)HSW1725|(% style="width:452px" %)Local mask IP address high byte 2
597 |=(% style="width: 160px;" %)HSW1726|(% style="width:452px" %)Local mask IP address high byte 3
598 |=(% style="width: 160px;" %)HSW1727|(% style="width:452px" %)Local mask IP address high byte 4
599 |=(% style="width: 160px;" %)HSW1728|(% style="width:452px" %)Local gateway IP address high byte 1
600 |=(% style="width: 160px;" %)HSW1729|(% style="width:452px" %)Local gateway IP address high byte 2
601 |=(% style="width: 160px;" %)HSW1730|(% style="width:452px" %)Local gateway IP address high byte 3
602 |=(% style="width: 160px;" %)HSW1731|(% style="width:452px" %)Local gateway IP address high byte 4
603 |=(% style="width: 160px;" %)HSW1733|(% colspan="1" rowspan="6" style="width:282px" %)(((
604 Display the MAC code of current WIFI
605
606 (display in hexadecimal)
607 )))|(% style="width:452px" %)Local MAC address high byte 1 (hexadecimal)
608 |=(% style="width: 160px;" %)HSW1734|(% style="width:452px" %)Local MAC address high byte 2 (hexadecimal)
609 |=(% style="width: 160px;" %)HSW1735|(% style="width:452px" %)Local MAC address high byte 3 (hexadecimal)
610 |=(% style="width: 160px;" %)HSW1736|(% style="width:452px" %)Local MAC address high byte 4 (hexadecimal)
611 |=(% style="width: 160px;" %)HSW1737|(% style="width:452px" %)Local MAC address high byte 5 (hexadecimal)
612 |=(% style="width: 160px;" %)HSW1738|(% style="width:452px" %)Local MAC address high byte 6 (hexadecimal)
613 |=(% style="width: 160px;" %)HSW1739|(% style="width:282px" %)Display the network status of WIFI|(% style="width:452px" %)(((
614 * =0: Server connection exception
615 * =1: Server connection is OK
616 )))
617 |=(% style="width: 160px;" %)HSW1740|(% style="width:282px" %)Wi-fi signal strength|(% style="width:452px" %)(((
618 Display the value of Wi-fi signal signal strength, ranges from 0~~100 (Signal strength is automatically obtained only once when HMI is powered on, and it will not be automatically updated. It needs to be used with the HSW1890)
619 )))
620 |=(% style="width: 160px;" %)HSW1741|(% colspan="1" rowspan="12" style="width:282px" %)Related IP register in 4Gnetwork status (It is valid when HMI is connected to 4G)|(% style="width:452px" %)Local IP address high byte 1
621 |=(% style="width: 160px;" %)HSW1742|(% style="width:452px" %)Local IP address high byte 2
622 |=(% style="width: 160px;" %)HSW1743|(% style="width:452px" %)Local IP address high byte 3
623 |=(% style="width: 160px;" %)HSW1744|(% style="width:452px" %)Local IP address high byte 4
624 |=(% style="width: 160px;" %)HSW1745|(% style="width:452px" %)Local mask IP address high byte 1
625 |=(% style="width: 160px;" %)HSW1746|(% style="width:452px" %)Local mask IP address high byte 2
626 |=(% style="width: 160px;" %)HSW1747|(% style="width:452px" %)Local mask IP address high byte 3
627 |=(% style="width: 160px;" %)HSW1748|(% style="width:452px" %)Local mask IP address high byte 4
628 |=(% style="width: 160px;" %)HSW1749|(% style="width:452px" %)Local gateway IP address high byte 1
629 |=(% style="width: 160px;" %)HSW1750|(% style="width:452px" %)Local gateway IP address high byte 2
630 |=(% style="width: 160px;" %)HSW1751|(% style="width:452px" %)Local gateway IP address high byte 3
631 |=(% style="width: 160px;" %)HSW1752|(% style="width:452px" %)Local gateway IP address high byte 4
632 |=(% style="width: 160px;" %)HSW1754|(% colspan="1" rowspan="6" style="width:282px" %)(((
633 Display the MAC code of current WIFI
634
635 (display in hexadecimal)
636 )))|(% style="width:452px" %)Local MAC address high byte 1 (hexadecimal)
637 |=(% style="width: 160px;" %)HSW1755|(% style="width:452px" %)Local MAC address high byte 2 (hexadecimal)
638 |=(% style="width: 160px;" %)HSW1756|(% style="width:452px" %)Local MAC address high byte 3 (hexadecimal)
639 |=(% style="width: 160px;" %)HSW1757|(% style="width:452px" %)Local MAC address high byte 4 (hexadecimal)
640 |=(% style="width: 160px;" %)HSW1758|(% style="width:452px" %)Local MAC address high byte 5 (hexadecimal)
641 |=(% style="width: 160px;" %)HSW1759|(% style="width:452px" %)Local MAC address high byte 6 (hexadecimal)
642 |=(% style="width: 160px;" %)HSW1760|(% style="width:282px" %)Display 4G network status|(% style="width:452px" %)(((
643 * =0: Server connection exception
644 * =1: Server connection is OK
645 )))
646 |=(% style="width: 160px;" %)HSW1761|(% style="width:282px" %)Display 4G network signal strength|(% style="width:452px" %)Signal strength: 0~~31. The greater the value ,the signal is stronger
647 |=(% style="width: 160px;" %)(((
648 HSW1762
649 )))|(% colspan="1" rowspan="13" style="width:282px" %)(((
650 Note: Valid when Ethernet2 of HMI is plugged into the network cable.
651 ①、When the Ethernet setting is enabled in the project parameters, this register displays the set value.
652 ②. When the Ethernet setting is not enabled in the engineering parameters, the register displays the Ethernet IP automatically acquired by the HMI.
653 ③. When the HMI is not plugged into the network cable, the register will show 0 whether the engineering parameters are set or not.
654 ④.IP related registers can be read and written (only static IP mode can be written).
655 )))|(% style="width:452px" %)(((
656 Ethernet2 Local IP address high byte 1
657 )))
658 |=(% style="width: 160px;" %)(((
659 HSW1763
660 )))|(% style="width:452px" %)(((
661 Ethernet2 Local IP address high byte 2
662 )))
663 |=(% style="width: 160px;" %)(((
664 HSW1764
665 )))|(% style="width:452px" %)(((
666 Ethernet2 Local IP address high byte 3
667 )))
668 |=(% style="width: 160px;" %)(((
669 HSW1765
670 )))|(% style="width:452px" %)(((
671 Ethernet2 Local IP address high byte 4
672 )))
673 |=(% style="width: 160px;" %)(((
674 HSW1766
675 )))|(% style="width:452px" %)(((
676 Ethernet2 Local mask IP address high byte 1
677 )))
678 |=(% style="width: 160px;" %)(((
679 HSW1767
680 )))|(% style="width:452px" %)(((
681 Ethernet2 Local mask IP address high byte 2
682 )))
683 |=(% style="width: 160px;" %)(((
684 HSW1768
685 )))|(% style="width:452px" %)Ethernet2 Local mask IP address high byte 3
686 |=(% style="width: 160px;" %)HSW1769|(% style="width:452px" %)Ethernet2 Local mask IP address high byte 4
687 |=(% style="width: 160px;" %)(((
688 HSW1770
689 )))|(% style="width:452px" %)(((
690 Ethernet2 Local gateway IP address high byte 1
691 )))
692 |=(% style="width: 160px;" %)(((
693 HSW1771
694 )))|(% style="width:452px" %)(((
695 Ethernet2 Local gateway IP address high byte 2
696 )))
697 |=(% style="width: 160px;" %)(((
698 HSW1772
699 )))|(% style="width:452px" %)(((
700 Ethernet2 Local gateway IP address high byte 3
701 )))
702 |=(% style="width: 160px;" %)(((
703 HSW1773
704 )))|(% style="width:452px" %)(((
705 Ethernet2 Local gateway IP address high byte 4
706 )))
707 |=(% style="width: 160px;" %)(((
708 HSW1774
709 )))|(% style="width:452px" %)(((
710 Ethernet2 Local Port Address
711 )))
712 |=(% style="width: 160px;" %)(((
713 HSW1775
714 )))|(% colspan="1" rowspan="6" style="width:282px" %)(((
715 ①Display the MAC code of Ethernet2 NIC
716
717 (hexadecimal display)
718
719 ②Read-only mode, not modifiable
720 )))|(% style="width:452px" %)(((
721 Ethernet2 Local MAC code high byte 1
722 )))
723 |=(% style="width: 160px;" %)(((
724 HSW1776
725 )))|(% style="width:452px" %)(((
726 Ethernet2 Local MAC code high byte 2
727 )))
728 |=(% style="width: 160px;" %)(((
729 HSW1777
730 )))|(% style="width:452px" %)(((
731 Ethernet2 Local MAC code high byte 3
732 )))
733 |=(% style="width: 160px;" %)(((
734 HSW1778
735 )))|(% style="width:452px" %)(((
736 Ethernet2 Local MAC code high byte 4
737 )))
738 |=(% style="width: 160px;" %)(((
739 HSW1779
740 )))|(% style="width:452px" %)(((
741 Ethernet2 Local MAC code high byte 5
742 )))
743 |=(% style="width: 160px;" %)(((
744 HSW1780
745 )))|(% style="width:452px" %)(((
746 Ethernet2 Local MAC code high byte 6
747 )))
748 |=(% style="width: 160px;" %)(((
749 HSW1781
750 )))|(% colspan="1" rowspan="8" style="width:282px" %)(((
751 ①Display and modify DNS1 and DNS2 of Ethernet2
752
753 ②Related registers can be read and written mode (only static IP mode can be written)
754 )))|(% style="width:452px" %)(((
755 Ethernet2 Local DNS1 address high byte 1
756 )))
757 |=(% style="width: 160px;" %)(((
758 HSW1782
759 )))|(% style="width:452px" %)(((
760 Ethernet2 Local DNS1 address high byte 2
761 )))
762 |=(% style="width: 160px;" %)(((
763 HSW1783
764 )))|(% style="width:452px" %)(((
765 Ethernet2 Local DNS1 address high byte 3
766 )))
767 |=(% style="width: 160px;" %)(((
768 HSW1784
769 )))|(% style="width:452px" %)(((
770 Ethernet2 Local DNS1 address high byte 4
771 )))
772 |=(% style="width: 160px;" %)(((
773 HSW1785
774 )))|(% style="width:452px" %)(((
775 Ethernet2 Local DNS2 address high byte 1
776 )))
777 |=(% style="width: 160px;" %)(((
778 HSW1786
779 )))|(% style="width:452px" %)(((
780 Ethernet2 Local DNS2 address high byte 2
781 )))
782 |=(% style="width: 160px;" %)(((
783 HSW1787
784 )))|(% style="width:452px" %)(((
785 Ethernet2 Local DNS2 address high byte 3
786 )))
787 |=(% style="width: 160px;" %)(((
788 HSW1788
789 )))|(% style="width:452px" %)(((
790 Ethernet2 Local DNS2 address high byte 4
791 )))
792 |=(% style="width: 160px;" %)(((
793 HSW1789
794 )))|(% colspan="1" style="width:282px" %)(((
795 Display or set the dynamic or static IP mode of Ethernet2
796 )))|(% style="width:452px" %)(((
797 HSX1789.0 = 0, Static IP mode
798
799 HSX1789.0 = 1, dynamic IP mode
800 )))
801 |=(% style="width: 160px;" %)(((
802 HSW1790
803 )))|(% colspan="1" style="width:282px" %)(((
804 Confirm Ethernet2 IP, subnet mask, gateway, DNS1, DNS2, and dynamic static IP settings
805 )))|(% style="width:452px" %)(((
806 ~= 1, confirm the setting (i.e., after modifying IP-related information, set this address to 1, representing confirmation of the modification, after which it will be reset to 0)
807 )))
808 |=(% style="width: 160px;" %)(((
809 HSW1791
810 )))|(% colspan="1" style="width:282px" %)(((
811 Network status of the Ethernet2 connection server
812 )))|(% style="width:452px" %)(((
813 ~= 0, connection to the server is abnormal = 1, connection to the server is normal
814 )))
815 |=(% style="width: 160px;" %)HSW1852|(% style="width:282px" %)Control the interval in two consecutive clicks|(% style="width:452px" %)Limit range: 1~~500ms. The default is 100 ms.
816 |=(% style="width: 160px;" %)HSW1853|(% style="width:282px" %)File format for exporting data records to USB flash drive or SD card|(% style="width:452px" %)(((
817 * =0: db database
818 * =1: CSV
819
820 (Only valid for script function DbToCsvFile)
821 )))
822 |=(% style="width: 160px;" %)HSW1854|(% style="width:282px" %)High and low word conversion type|(% style="width:452px" %)(((
823 * =0: use the old high-low word conversion (default)
824 * =1: usie the new high-low word conversion
825 )))
826 |=(% style="width: 160px;" %)HSW1855|(% style="width:282px" %)Screen Lock prompt display control|(% style="width:452px" %)(((
827 Control whether the screen lock prompt is displayed,
828
829 * =0: display(default value)
830 * =Other: no display.
831 )))
832 |=(% style="width: 160px;" %)HSW1856|(% style="width:282px" %)Display map fence drawing status|(% style="width:452px" %)(((
833 * =0: no map fence
834 * =1: The map fence is drawn and the device is inside the fence
835 * =2: The map fence is drawn and the device is outside the fence
836 )))
837 |=(% style="width: 160px;" %)HSW1857|(% style="width:282px" %)USB disk download |(% style="width:452px" %)(((
838 * =0: download project
839 * =1: download firmware
840 * =2: enter the background
841 )))
842 |=(% style="width: 160px;" %)HSW1865|(% style="width:282px" %)Priority connection to the cloud|(% style="width:452px" %)(((
843 * =0: priority Ethernet
844 * =1: priority WLAN
845 * =2: priority 4G
846 )))
847 |=(% style="width: 160px;" %)HSW1866|(% style="width:282px" %)Delete the Lua extension module file|(% style="width:452px" %)(((
848 * =0: delete;
849 * = Others: do not delete
850 )))
851 |=(% style="width: 160px;" %)HSW1867|(% style="width:282px" %)Reset mode|(% style="width:452px" %)(((
852 Monitor address is set during reset of reset switch, whether to cancel reset,
853
854 * = 0: yes (default);
855 * = 1: no
856 )))
857 |=(% style="width: 160px;" %)HSW1868|(% style="width:282px" %)Double-click or long press the record type table mode|(% style="width:452px" %)(((
858 Controls whether the button pops up when double-clicking or long pressing on record type table object
859
860 * = 0: yes (default);
861 * = 1: no
862 )))
863 |=(% style="width: 160px;" %)(((
864 HSW1869
865 )))|(% style="width:282px" %)(((
866 Dynamic screensaver countdown
867 )))|(% style="width:452px" %)(((
868 Countdown to enter dynamic screensaver effect, unit (S)
869 )))
870 |=(% style="width: 160px;" %)(((
871 HSW1870
872 )))|(% style="width:282px" %)(((
873 Display or set the dynamic or static IP mode of Ethernet1
874 )))|(% style="width:452px" %)(((
875 HSX1870.0 = 0, Static IP mode
876
877 HSX1870.0 = 1, dynamic IP mode
878 )))
879 |=(% style="width: 160px;" %)(((
880 HSW1871
881 )))|(% style="width:282px" %)(((
882 Confirm the IP, subnet mask, gateway, DNS1, DNS2, and dynamic static IP settings for Ethernet1
883 )))|(% style="width:452px" %)(((
884 ~= 1, confirm the setting (i.e., after modifying IP-related information, set this address to 1, representing confirmation of the modification, after which it will be reset to 0)
885 )))
886 |=(% style="width: 160px;" %)(((
887 HSW1872
888 )))|(% colspan="1" rowspan="8" style="width:282px" %)(((
889 ①Display and modify DNS1 and DNS2 of Ethernet1
890
891 ②Related registers can be read and written mode (only static IP mode can be written)
892 )))|(% style="width:452px" %)(((
893 Ethernet1 Local DNS1 address high byte 1
894 )))
895 |=(% style="width: 160px;" %)(((
896 HSW1873
897 )))|(% style="width:452px" %)Ethernet1 Local DNS1 address high byte 2
898 |=(% style="width: 160px;" %)(((
899 HSW1874
900 )))|(% style="width:452px" %)Ethernet1 Local DNS1 address high byte 3
901 |=(% style="width: 160px;" %)(((
902 HSW1875
903 )))|(% style="width:452px" %)Ethernet1 Local DNS1 address high byte 4
904 |=(% style="width: 160px;" %)(((
905 HSW1876
906 )))|(% style="width:452px" %)Ethernet1 Local DNS2 address high byte 1
907 |=(% style="width: 160px;" %)(((
908 HSW1877
909 )))|(% style="width:452px" %)Ethernet1 Local DNS2 address high byte 2
910 |=(% style="width: 160px;" %)(((
911 HSW1878
912 )))|(% style="width:452px" %)Ethernet1 Local DNS2 address high byte 3
913 |=(% style="width: 160px;" %)(((
914 HSW1879
915 )))|(% style="width:452px" %)Ethernet1 Local DNS2 address high byte 4
916 |=(% style="width: 160px;" %)HSW1890|(% colspan="1" style="width:282px" %)Enable refresh current network signal|(% style="width:452px" %)(((
917 * =1: Refresh the network signal once after triggered (This register will be automatically reset after triggered, only update the signal value once after per 15 seconds, not able to update twice in the short interval)
918 * =Others: not refresh
919 )))
920 |=(% style="width: 160px;" %)HSW1891|(% colspan="1" style="width:282px" %)Enable clear cache for screen data  |(% style="width:452px" %)(((
921 * =1, not clear screen cache when switch language
922 * =2, trigger clear cache of all screens for once time
923 * =3, always clear cache of all screen data
924 )))
925 |=(% style="width: 160px;" %)HSW1892|(% colspan="1" style="width:282px" %)Keyboard key polling interval setting|(% style="width:452px" %)(((
926 ~=0，50ms；
927
928 ~=1，40ms；
929
930 ~=2，30ms；
931
932 ~=3，20ms；
933
934 ~=4，10ms；
935 )))
936 |=(% style="width: 160px;" %)HSW1893|(% colspan="1" style="width:282px" %)Cursor mode switch|(% style="width:452px" %)(((
937 ~=0, default free mode;
938
939 ~=1, selected box mode;
940
941 ~=2, selected gray mode;
942
943 ~=3, mouse selected mode;
944 )))
945 |=(% style="width: 160px;" %)HSW1894|(% colspan="1" style="width:282px" %)Enable a specific serial keyboard|(% style="width:452px" %)(((
946 ~=1 Enable;
947
948 ~=Other, not enabled;
949
950 Note: Only valid for initialization, recommended to use in background initialization script;
951 )))
952 |=(% style="width: 160px;" %)HSW1895|(% colspan="1" style="width:282px" %)Controls whether keyboard keys are effective in certain situations|(% style="width:452px" %)(((
953 ~=0, by default, the key trigger does not take effect when the screen is off or in screen saver mode;
954
955 ~=1, HSX1895.0=1, the key trigger will also take effect when the screen is off;
956
957 ~=2, HSX1895.1=1, the key trigger will also take effect in screen saver mode;
958 )))
959 |=(% style="width: 160px;" %)HSW1903|(% colspan="1" style="width:282px" %)Check the network cable connection status|(% style="width:452px" %)If a network cable is detected, it is set to 1; if no network cable is detected, it is set to 0
960 |=(% style="width: 160px;" %)HSW10000~~19999|(% style="width:282px" %)Power-down storage area|(% style="width:452px" %)After restart, the data remains
961 |=(% style="width: 160px;" %)HSW10035|(% rowspan="13" style="width:282px" %)(((
962 Note: Valid when Ethernet1 of HMI is plugged into the network cable.
963 ① When the Ethernet setting is enabled in the project parameters, this register displays the set value.
964 ② When the Ethernet setting is not enabled in the engineering parameters, the register displays the Ethernet IP automatically acquired by the HMI.
965 ③ When the HMI is not plugged into the network cable, the register will show 0 whether the engineering parameters are set or not.
966 ④ IP related registers can be read and written (only static IP mode can be written).
967 )))|(% style="width:452px" %)Local IP address high byte 1
968 |=(% style="width: 160px;" %)HSW10036|(% style="width:452px" %)Local IP address high byte 2
969 |=(% style="width: 160px;" %)HSW10037|(% style="width:452px" %)Local IP address high byte 3
970 |=(% style="width: 160px;" %)HSW10038|(% style="width:452px" %)Local IP address high byte 4
971 |=(% style="width: 160px;" %)HSW10039|(% style="width:452px" %)Local mask IP address high byte 1
972 |=(% style="width: 160px;" %)HSW10040|(% style="width:452px" %)Local mask IP address high byte 2
973 |=(% style="width: 160px;" %)HSW10041|(% style="width:452px" %)Local mask IP address high byte 3
974 |=(% style="width: 160px;" %)HSW10042|(% style="width:452px" %)Local mask IP address high byte 4
975 |=(% style="width: 160px;" %)HSW10043|(% style="width:452px" %)Local gateway address high byte 1
976 |=(% style="width: 160px;" %)HSW10044|(% style="width:452px" %)Local gateway address high byte 2
977 |=(% style="width: 160px;" %)HSW10045|(% style="width:452px" %)Local gateway address high byte 3
978 |=(% style="width: 160px;" %)HSW10046|(% style="width:452px" %)Local gateway address high byte 4
979 |=(% style="width: 160px;" %)HSW10047|(% style="width:452px" %)Local port address
980 |=(% style="width: 160px;" %)HSW10048|(% rowspan="6" style="width:282px" %)(((
981 ①Display the MAC code of Ethernet1 NIC
982
983 (hexadecimal display)
984
985 ②Read-only mode, not modifiable
986 )))|(% style="width:452px" %)Local MAC code high word 1
987 |=(% style="width: 160px;" %)HSW10049|(% style="width:452px" %)Local MAC code high word 2
988 |=(% style="width: 160px;" %)HSW10050|(% style="width:452px" %)Local MAC code high word 3
989 |=(% style="width: 160px;" %)HSW10051|(% style="width:452px" %)Local MAC code high word 4
990 |=(% style="width: 160px;" %)HSW10052|(% style="width:452px" %)Local MAC code high word 5
991 |=(% style="width: 160px;" %)HSW10053|(% style="width:452px" %)Local MAC code high word 6
992 |=(% style="width: 160px;" %)HSW10118|(% colspan="1" rowspan="2" style="width:282px" %)TSAP settings for HMI in the Siemens LOGO! 8 protocol|(% style="width:452px" %)HMI local TSAP, which corresponds to the remote TSAP of PLC
993 |=(% style="width: 160px;" %)HSW10119|(% style="width:452px" %)HMI remote TSAP, which corresponds to the local TSAP of PLC
994 |=(% style="width: 160px;" %)HSW10461~~10493|(% style="width:282px" %)Remote access password|(% style="width:452px" %)8-character remote access password
995 |=(% style="width: 160px;" %)HSW10494~~10558|(% style="width:282px" %)Machine ID (Read only)|(% style="width:452px" %)Machine ID for remote access (read only 64-bit)
996 |=(% style="width: 160px;" %)HSW10576|(% style="width:282px" %)Save dynamic installment settings|(% style="width:452px" %)HSX10576.0=1: Save the set dynamic installment information
997 |=(% style="width: 160px;" %)HSW10577|(% style="width:282px" %)Control address for installment|(% style="width:452px" %)(((
998 * HSX10577.0=0: disable dynamic installment
999 * HSX10577.0=1: enable dynamic installment
1000 * HSX10577.1=0: disable static installment
1001 * HSX10577.1=1: enable static installment
1002 )))
1003 |=(% style="width: 160px;" %)HSW10578-10583|(% style="width:282px" %)Password for dynamic installment|(% style="width:452px" %)Character Input/ Display (length: 6)
1004 |=(% style="width: 160px;" %)HSW10584-10586|(% style="width:282px" %)Expiry time of dynamic installment|(% style="width:452px" %)Expiry time: YYYYMMDD (Numeric Input/ Display)
1005 |=(% style="width: 160px;" %)HSW10587-10589|(% style="width:282px" %)Last expiry time of dynamic installment|(% style="width:452px" %)Expiry time: YYYYMMDD (Numeric Input/ Display)
1006 |=(% style="width: 160px;" %)HSW10590|(% style="width:282px" %)Background light time|(% style="width:452px" %)(((
1007 Set the light time for background
1008
1009 * =0: The screen backlight is always on.
1010 * =Others: The screen backlight is on for a period of time and then turns off. The length of time is controlled by the value of the register address. Unit: second.
1011 )))
1012 |=(% style="width: 160px;" %)HSW10591|(% style="width:282px" %)Backlight brightness adjustment|(% style="width:452px" %)Backlight brightness range: 1 (darkest) ~~ 100 (brightest)
1013 |=(% style="width: 160px;" %)HSW10603|(% style="width:282px" %)Set the printer to print orientation|(% style="width:452px" %)(((
1014 Set the print direction:
1015
1016 * =1: Forward printing
1017 * =2: Reverse print
1018 * =Other: Forward print
1019 )))
1020 |=(% style="width: 160px;" %)HSW10604|(% style="width:282px" %)Print dot type|(% style="width:452px" %)(((
1021 * =1: new firmware 8 dot matrix type
1022 * =2: new firmware 24 dot matrix type
1023 * =3: old firmware 8 dot matrix type
1024 * =4: old firmware 24 dot matrix type
1025 * =Other: new firmware 8 dot matrix type
1026 )))
1027 |=(% style="width: 160px;" %)HSW10605|(% style="width:282px" %)Print width of printer|(% style="width:452px" %)Set the width of the printer to print (in pixels), such as HSW10605 = 394: The printer supports images with a print width of 394 pixels
1028 |=(% style="width: 160px;" %)HSW10606|(% style="width:282px" %)Printer instruction type|(% style="width:452px" %)(((
1029 * =1: Graphic print type
1030 * =2: Dot density printing type
1031 * =3(Default value): special for EPSON printer
1032 )))
1033 |=(% style="width: 160px;" %)HSW10607|(% style="width:282px" %)Printer paper cutting function|(% style="width:452px" %)(((
1034 * =1: Enable
1035 * =2: Disable
1036 )))
1037 |=(% style="width: 160px;" %)HSW10608|(% style="width:282px" %)Print the alignment of the text|(% style="width:452px" %)(((
1038 * =1: Left alignment
1039 * =2: Center alignment
1040 * =3: Right alignment
1041 )))
1042 |=(% style="width: 160px;" %)HSW10611|(% style="width:282px" %)Set weconcloud server|(% style="width:452px" %)(((
1043 * =0: Select the server configured in "Project Settings"
1044 * =1: select Server 1
1045 * =2: select Server 2
1046 )))
1047 |=(% style="width: 160px;" %)HSW11750|(% style="width:282px" %)Set the language of the Message List prompt** (ie series)**|(% style="width:452px" %)(((
1048 * =0: which is followed the project language
1049 * =1: English
1050 * =2: Chinese
1051 )))
1052 |=(% style="width: 160px;" %)HSW11752|(% style="width:282px" %)Traffic monitoring control|(% style="width:452px" %)= 1: Enable the flow monitoring function
1053 ~= Other: Disable the flow monitoring function
1054 |=(% style="width: 160px;" %)HSW11753|(% style="width:282px" %)Traffic monitoring network card type|(% style="width:452px" %)= 0: Ethernet card
1055 ~= 1: 4G
1056 ~= 2: Wi-Fi
1057 |=(% style="width: 160px;" %)HSW11754-11755|(% style="width:282px" %)Historical traffic consumption|(% style="width:452px" %)The total traffic consumed historically (bytes) [value is an integer]
1058 |=(% style="width: 160px;" %)HSW11756|(% style="width:282px" %)(((
1059 Access permission restrictions
1060
1061 (ig series and** **8000/9000 series with -R after system upgrade)
1062 )))|(% style="width:452px" %)(((
1063 * =0: LAN or the external network both OK
1064 * =1: Only LAN access
1065 * =2: Only external network can access
1066 * =3: Close the functions
1067 )))
1068 |=(% style="width: 160px;" %)HSW11757|(% style="width:282px" %)Enable the valid date of the dynamic installment password|(% style="width:452px" %)(((
1069 * =0: Disabled
1070 * =1: Enable
1071 )))
1072 |=(% style="width: 160px;" %)HSW11758|(% style="width:282px" %)Enable Screensaver|(% style="width:452px" %)(((
1073 * =0: Disabled
1074 * =1: Enable
1075 )))
1076 |=(% style="width: 160px;" %)HSW11759|(% style="width:282px" %)Screensaver interval time|(% style="width:452px" %)(((
1077 Set the time how long will enter Screensaver (Range 10~~43200s)
1078 )))
1079 |=(% style="width: 160px;" %)HSW11760|(% style="width:282px" %)Screensaver countdown|(% style="width:452px" %)Display the countdown to enter the Screensaver, unit: second.
1080 |=(% style="width: 160px;" %)HSW11761|(% style="width:282px" %)Screensaver screen number|(% style="width:452px" %)Set the screen number for Screensaver
1081 |=(% style="width: 160px;" %)(((
1082 HSW11762
1083 )))|(% style="width:282px" %)(((
1084 Dynamic screensaver control address
1085 )))|(% style="width:452px" %)(((
1086 HSX11762.0=0, initialize with project configuration;
1087
1088 HSX11762.0=1, initialize with special register configuration;
1089
1090 HSX11762.1=0, disable dynamic screensaver;
1091
1092 HSX11762.1=1, enable dynamic screensaver
1093 )))
1094 |=(% style="width: 160px;" %)(((
1095 HSW11763
1096 )))|(% style="width:282px" %)(((
1097 Waiting time to enter the dynamic screensaver
1098 )))|(% style="width:452px" %)(((
1099 Waiting time when the screen is not operated, range 1~~720 minutes
1100 )))
1101 |=(% style="width: 160px;" %)(((
1102 HSW11764
1103 )))|(% style="width:282px" %)(((
1104 Animated screensaver animation type
1105 )))|(% style="width:452px" %)(((
1106 ~=0: Raster,=1: Blinds,=2: Bubble
1107 )))
1108 |=(% style="width: 160px;" %)HSW11767|(% style="width:282px" %)Remote screen display adaptation mode switching|(% style="width:452px" %)=0, default mode, remote full-screen zoom display for horizontal screen projects, remote proportional zoom display for vertical screen projects;
1109 ~=1, full-screen zoom display;
1110 ~=2, proportional zoom display according to screen size ratio;
1111 ~=3, no zoom display according to screen pixels;
1112 |=(% style="width: 160px;" %)HSW11773|(% style="width:282px" %)Automatically log out user control address|(% style="width:452px" %)=3: that is, HSX11773.0=1, HSX11773.1=1, based on the configuration in the address, enable automatic user logout.
1113 |=(% style="width: 160px;" %)HSW11774|(% style="width:282px" %)Automatic user logout interval|(% style="width:452px" %)(((
1114 Range: 1 to 255
1115
1116 Unit: Minutes
1117 )))
Devin Chen 3.1 1118 |=(% style="width: 160px;" %)HSW11815|(% style="width:282px" %)Sub-screen drag function (For PI10.4 and above)|(% style="width:452px" %)(((
Devin Chen 2.1 1119 * =0: Disabled
1120 * =1: Enable
1121 )))
xingzhi lin 5.1 1122 |=(% style="width: 160px;" %)HSW11816|(% style="width:282px" %)Recipe record component button spacing control|(% style="width:452px" %)This controls the spacing between the top and bottom rows of buttons in all recipe record widgets. The value is the pixel spacing between the buttons. The minimum value is 0, and the maximum value is calculated based on the width of each recipe widget. The spacing plus the button size must not exceed the widget's size. (Note that if the register is greater than the maximum value, the actual spacing is the maximum spacing.)
Wecon 1.1 1123
1124 == Serial port communication configuration ==
1125
1126 (% class="table-bordered" %)
1127 |=(% scope="row" style="width: 102px;" %)Port|=(% style="width: 173px;" %)**Function**|=(% style="width: 122px;" %)**Address**|=(% colspan="2" style="width: 506px;" %)**Description**
1128 |(% colspan="1" rowspan="11" style="width:102px" %)COM1|(% style="width:173px" %)Communication mode|(% style="width:122px" %)HSW10061|(% colspan="2" style="width:506px" %)(((
1129 * =0: RS232
1130 * =1: RS485
1131 * =2: RS422
1132 )))
1133 |(% style="width:173px" %)Baud rate|(% style="width:122px" %)HSW10062|(% colspan="2" style="width:506px" %)(((
1134 * =0: 1200
1135 * =1: 2400
1136 * =2: 4800
1137 * =3: 9600
1138 * =4: 19200
1139 * =5: 38400
1140 * =6: 57600
1141 * =7: 115200
xingzhi lin 4.1 1142 * =8: 187500
1143 * =9: 230400
Wecon 1.1 1144 )))
1145 |(% style="width:173px" %)Data bit|(% style="width:122px" %)HSW10063|(% colspan="2" style="width:506px" %)(((
1146 * =7: 7 bit
1147 * =8: 8 bit
1148 )))
1149 |(% style="width:173px" %)Stop bit|(% style="width:122px" %)HSW10064|(% colspan="2" style="width:506px" %)(((
1150 * =1: 1 bit
1151 * =2: 2 bit
1152 )))
1153 |(% style="width:173px" %)Check bit|(% style="width:122px" %)HSW10065|(% colspan="2" style="width:506px" %)(((
1154 * =0: None
1155 * =1: ODD
1156 * =2: EVEN
1157 )))
1158 |(% style="width:173px" %)Wait timeout|(% style="width:122px" %)HSW10066|(% colspan="2" style="width:506px" %)(((
1159 * Unit: ms.
1160 * Range: 0 to 30000
1161 )))
1162 |(% style="width:173px" %)reveive timeout|(% style="width:122px" %)HSW10067|(% colspan="2" style="width:506px" %)(((
1163 * Unit: ms.
1164 * Range: 0 to 30000
1165 )))
1166 |(% style="width:173px" %)Retry time|(% style="width:122px" %)HSW10068|(% colspan="2" style="width:506px" %)(((
1167 * Unit: times.
1168 * Range: 0 to 100
1169 )))
1170 |(% style="width:173px" %)Retry timeout|(% style="width:122px" %)HSW10069|(% colspan="2" style="width:506px" %)(((
1171 * Unit: s.
1172 * Range: 0 to 300
1173 )))
1174 |(% style="width:173px" %)HMI station number|(% style="width:122px" %)HSW10070|(% colspan="2" style="width:506px" %)
1175 |(% style="width:173px" %)PLC station number|(% style="width:122px" %)HSW10071|(% colspan="2" style="width:506px" %)
1176 |(% colspan="1" rowspan="11" style="width:102px" %)COM1-2|(% style="width:173px" %)Communication mode|(% style="width:122px" %)HSW10094|(% colspan="2" style="width:506px" %)(((
1177 * =0: RS232
1178 * =1: RS485
1179 * =2: RS422
1180 * =6: RS485-2
1181 )))
1182 |(% style="width:173px" %)Baud rate|(% style="width:122px" %)HSW10095|(% colspan="2" style="width:506px" %)(((
1183 * =0: 1200
1184 * =1: 2400
1185 * =2: 4800
1186 * =3: 9600
1187 * =4: 19200
1188 * =5: 38400
1189 * =6: 57600
1190 * =7: 115200
1191 * =8: 230400
1192 )))
1193 |(% style="width:173px" %)Data bit|(% style="width:122px" %)HSW10096|(% colspan="2" style="width:506px" %)(((
1194 * =7: 7 bit
1195 * =8: 8 bit
1196 )))
1197 |(% style="width:173px" %)Stop bit|(% style="width:122px" %)HSW10097|(% colspan="2" style="width:506px" %)(((
1198 * =1: 1 bit
1199 * =2: 2 bit
1200 )))
1201 |(% style="width:173px" %)Check bit|(% style="width:122px" %)HSW10098|(% colspan="2" style="width:506px" %)(((
1202 * =0: None
1203 * =1: ODD
1204 * =2: EVEN
1205 )))
1206 |(% style="width:173px" %)Wait timeout|(% style="width:122px" %)HSW10099|(% colspan="2" style="width:506px" %)(((
1207 * Unit: ms.
1208 * Range: 0 to 30000
1209 )))
1210 |(% style="width:173px" %)receive timeout|(% style="width:122px" %)HSW10100|(% colspan="2" style="width:506px" %)(((
1211 * Unit: ms.
1212 * Range: 0 to 30000
1213 )))
1214 |(% style="width:173px" %)Retry time|(% style="width:122px" %)HSW10101|(% colspan="2" style="width:506px" %)(((
1215 * Unit: times.
1216 * Range: 0 to 100
1217 )))
1218 |(% style="width:173px" %)Retry timeout|(% style="width:122px" %)HSW10102|(% colspan="2" style="width:506px" %)(((
1219 * Unit: s.
1220 * Range: 0 to 30
1221 )))
1222 |(% style="width:173px" %)HMI station number|(% style="width:122px" %)HSW10103|(% colspan="2" style="width:506px" %)
1223 |(% style="width:173px" %)PLC station number|(% style="width:122px" %)HSW10104|(% colspan="2" style="width:506px" %)
1224 |(% colspan="1" rowspan="11" style="width:102px" %)COM1-3|(% style="width:173px" %)Communication mode|(% style="width:122px" %)HSW10120|(% colspan="2" style="width:506px" %)(((
1225 * =0: RS232
1226 * =1: RS485
1227 * =2: RS422
1228 * =6: RS485-2
1229 )))
1230 |(% style="width:173px" %)Baud rate|(% style="width:122px" %)HSW10121|(% colspan="2" style="width:506px" %)(((
1231 * =0: 1200
1232 * =1: 2400
1233 * =2: 4800
1234 * =3: 9600
1235 * =4: 19200
1236 * =5: 38400
1237 * =6: 57600
1238 * =7: 115200
1239 * =8: 230400
1240 )))
1241 |(% style="width:173px" %)Data bit|(% style="width:122px" %)HSW10122|(% colspan="2" style="width:506px" %)(((
1242 * =7: 7 bit
1243 * =8: 8 bit
1244 )))
1245 |(% style="width:173px" %)Stop bit|(% style="width:122px" %)HSW10123|(% colspan="2" style="width:506px" %)(((
1246 * =1: 1 bit
1247 * =2: 2 bit
1248 )))
1249 |(% style="width:173px" %)Check bit|(% style="width:122px" %)HSW10124|(% colspan="2" style="width:506px" %)(((
1250 * =0: None
1251 * =1: ODD
1252 * =2: EVEN
1253 )))
1254 |(% style="width:173px" %)Wait timeout|(% style="width:122px" %)HSW10125|(% colspan="2" style="width:506px" %)(((
1255 * Unit: ms.
1256 * Range: 0 to 30000
1257 )))
1258 |(% style="width:173px" %)receive timeout|(% style="width:122px" %)HSW10126|(% colspan="2" style="width:506px" %)(((
1259 * Unit: ms.
1260 * Range: 0 to 30000
1261 )))
1262 |(% style="width:173px" %)Retry time|(% style="width:122px" %)HSW10127|(% colspan="2" style="width:506px" %)(((
1263 * Unit: times.
1264 * Range: 0 to 100
1265 )))
1266 |(% style="width:173px" %)Retry timeout|(% style="width:122px" %)HSW10128|(% colspan="2" style="width:506px" %)(((
1267 * Unit: s.
1268 * Range: 0 to 30
1269 )))
1270 |(% style="width:173px" %)HMI station number|(% style="width:122px" %)HSW10129|(% colspan="2" style="width:506px" %)
1271 |(% style="width:173px" %)PLC station number|(% style="width:122px" %)HSW10130|(% colspan="2" style="width:506px" %)
1272 |(% colspan="1" rowspan="11" style="width:102px" %)COM2|(% style="width:173px" %)Communication mode|(% style="width:122px" %)HSW10072|(% colspan="2" style="width:506px" %)(((
1273 * =0: RS232
1274 * =1: RS485
1275 )))
1276 |(% style="width:173px" %)Baud rate|(% style="width:122px" %)HSW10073|(% colspan="2" style="width:506px" %)(((
1277 * =0: 1200
1278 * =1: 2400
1279 * =2: 4800
1280 * =3: 9600
1281 * =4: 19200
1282 * =5: 38400
1283 * =6: 57600
1284 * =7: 115200
1285 * =8: 230400
1286 )))
1287 |(% style="width:173px" %)Data bit|(% style="width:122px" %)HSW10074|(% colspan="2" style="width:506px" %)(((
1288 * =7: 7 bit
1289 * =8: 8 bit
1290 )))
1291 |(% style="width:173px" %)Stop bit|(% style="width:122px" %)HSW10075|(% colspan="2" style="width:506px" %)(((
1292 * =1: 1 bit
1293 * =2: 2 bit
1294 )))
1295 |(% style="width:173px" %)Check bit|(% style="width:122px" %)HSW10076|(% colspan="2" style="width:506px" %)(((
1296 * =0: None
1297 * =1: ODD
1298 * =2: EVEN
1299 )))
1300 |(% style="width:173px" %)Wait timeout|(% style="width:122px" %)HSW10077|(% colspan="2" style="width:506px" %)(((
1301 * Unit: ms.
1302 * Range: 0 to 30000
1303 )))
1304 |(% style="width:173px" %)receive timeout|(% style="width:122px" %)HSW10078|(% colspan="2" style="width:506px" %)(((
1305 * Unit: ms.
1306 * Range: 0 to 30000
1307 )))
1308 |(% style="width:173px" %)Retry time|(% style="width:122px" %)HSW10079|(% colspan="2" style="width:506px" %)(((
1309 * Unit: times.
1310 * Range: 0 to 100
1311 )))
1312 |(% style="width:173px" %)Retry timeout|(% style="width:122px" %)HSW10080|(% colspan="2" style="width:506px" %)(((
1313 * Unit: s.
1314 * Range: 0 to 30
1315 )))
1316 |(% style="width:173px" %)HMI station number|(% style="width:122px" %)HSW10081|(% colspan="2" style="width:506px" %)
1317 |(% style="width:173px" %)PLC station number|(% style="width:122px" %)HSW10082|(% colspan="2" style="width:506px" %)
1318 |(% colspan="1" rowspan="11" style="width:102px" %)COM2-2|(% style="width:173px" %)Communication mode|(% style="width:122px" %)HSW10105|(% colspan="2" style="width:506px" %)(((
1319 * =0: RS232
1320 * =1: RS485
1321 )))
1322 |(% style="width:173px" %)Baud rate|(% style="width:122px" %)HSW10106|(% colspan="2" style="width:506px" %)(((
1323 * =0: 1200
1324 * =1: 2400
1325 * =2: 4800
1326 * =3: 9600
1327 * =4: 19200
1328 * =5: 38400
1329 * =6: 57600
1330 * =7: 115200
1331 * =8: 230400
1332 )))
1333 |(% style="width:173px" %)Data bit|(% style="width:122px" %)HSW10107|(% colspan="2" style="width:506px" %)(((
1334 * =7: 7 bit
1335 * =8: 8 bit
1336 )))
1337 |(% style="width:173px" %)Stop bit|(% style="width:122px" %)HSW10108|(% colspan="2" style="width:506px" %)(((
1338 * =1: 1 bit
1339 * =2: 2 bit
1340 )))
1341 |(% style="width:173px" %)Check bit|(% style="width:122px" %)HSW10109|(% colspan="2" style="width:506px" %)(((
1342 * =0: None
1343 * =1: ODD
1344 * =2: EVEN
1345 )))
1346 |(% style="width:173px" %)Wait timeout|(% style="width:122px" %)HSW10110|(% colspan="2" style="width:506px" %)(((
1347 * Unit: ms.
1348 * Range: 0 to 30000
1349 )))
1350 |(% style="width:173px" %)receive timeout|(% style="width:122px" %)HSW10111|(% colspan="2" style="width:506px" %)(((
1351 * Unit: ms.
1352 * Range: 0 to 30000
1353 )))
1354 |(% style="width:173px" %)Retry time|(% style="width:122px" %)HSW10112|(% colspan="2" style="width:506px" %)(((
1355 * Unit: times.
1356 * Range: 0 to 100
1357 )))
1358 |(% style="width:173px" %)Retry timeout|(% style="width:122px" %)HSW10113|(% colspan="2" style="width:506px" %)(((
1359 * Unit: s.
1360 * Range: 0 to 30
1361 )))
1362 |(% style="width:173px" %)HMI station number|(% style="width:122px" %)HSW10114|(% colspan="2" style="width:506px" %)
1363 |(% style="width:173px" %)PLC station number|(% style="width:122px" %)HSW10115|(% colspan="2" style="width:506px" %)
1364 |(% colspan="1" rowspan="11" style="width:102px" %)COM3|(% style="width:173px" %)Communication mode|(% style="width:122px" %)HSW10083|(% colspan="2" style="width:506px" %)(((
1365 * =1: RS485
1366 )))
1367 |(% style="width:173px" %)Baud rate|(% style="width:122px" %)HSW10084|(% colspan="2" style="width:506px" %)(((
1368 * =0: 1200
1369 * =1: 2400
1370 * =2: 4800
1371 * =3: 9600
1372 * =4: 19200
1373 * =5: 38400
1374 * =6: 57600
1375 * =7: 115200
1376 * =8: 230400
1377 )))
1378 |(% style="width:173px" %)Data bit|(% style="width:122px" %)HSW10085|(% colspan="2" style="width:506px" %)(((
1379 * =7: 7 bit
1380 * =8: 8 bit
1381 )))
1382 |(% style="width:173px" %)Stop bit|(% style="width:122px" %)HSW10086|(% colspan="2" style="width:506px" %)(((
1383 * =1: 1 bit
1384 * =2: 2 bit
1385 )))
1386 |(% style="width:173px" %)Check bit|(% style="width:122px" %)HSW10087|(% colspan="2" style="width:506px" %)(((
1387 * =0: None
1388 * =1: ODD
1389 * =2: EVEN
1390 )))
1391 |(% style="width:173px" %)Wait timeout|(% style="width:122px" %)HSW10088|(% colspan="2" style="width:506px" %)(((
1392 * Unit: ms.
1393 * Range: 0 to 30000
1394 )))
1395 |(% style="width:173px" %)receive timeout|(% style="width:122px" %)HSW10089|(% colspan="2" style="width:506px" %)(((
1396 * Unit: ms.
1397 * Range: 0 to 30000
1398 )))
1399 |(% style="width:173px" %)Retry time|(% style="width:122px" %)HSW10090|(% colspan="2" style="width:506px" %)(((
1400 * Unit: times.
1401 * Range: 0 to 100
1402 )))
1403 |(% style="width:173px" %)Retry timeout|(% style="width:122px" %)HSW10091|(% colspan="2" style="width:506px" %)(((
1404 * Unit: s.
1405 * Range: 0 to 30
1406 )))
1407 |(% style="width:173px" %)HMI station number|(% style="width:122px" %)HSW10092|(% colspan="2" style="width:506px" %)
1408 |(% style="width:173px" %)PLC station number|(% style="width:122px" %)HSW10093|(% colspan="2" style="width:506px" %)
1409 |(% colspan="1" rowspan="2" style="width:102px" %)CAN port|(% style="width:173px" %)CAN1 baud rate|(% style="width:122px" %)HSW010116|(% style="width:299px" %)(((
1410 Unit: K, the baud rate must be an integer.
1411
1412 For example, when the baud rate required is 250000, just enter 250.
1413 )))|(% colspan="1" rowspan="2" style="width:218px" %)**✎Note: **If baud rate has been modified,please wait 5 seconds,then restart the HMI to take effect.
1414 |(% style="width:173px" %)CAN2 baud rate|(% style="width:122px" %)HSW010117|(% style="width:299px" %)(((
1415 Unit: K, the baud rate must be an integer.
1416
1417 For example, when the baud rate required is 250000, just enter 250.
1418 )))
1419
1420 == Ethernet communication configuration ==
1421
1422 (% class="table-bordered" %)
1423 |(% style="width:40px" %)**No.**|(% style="width:295px" %)**Function**|(% style="width:220px" %)**Address**|(% style="width:336px" %)**Description**
1424 |(% rowspan="7" style="width:40px" %)1|(% colspan="1" rowspan="7" style="width:295px" %)Ethernet parameter configuration for communication number 1 in list. Configure those addresses according to connected device. After configuration, wait for 5 seconds and restart the HMI.|(% style="width:220px" %)HSW11004|(% style="width:336px" %)Device IP address high word 1
1425 |(% style="width:220px" %)HSW11005|(% style="width:336px" %)Device IP address high word 2
1426 |(% style="width:220px" %)HSW11006|(% style="width:336px" %)Device IP address high word 3
1427 |(% style="width:220px" %)HSW11007|(% style="width:336px" %)Device IP address high word 4
1428 |(% style="width:220px" %)HSW11008|(% style="width:336px" %)Device Port number
1429 |(% style="width:220px" %)HSW11009|(% style="width:336px" %)(((
1430 ~=2 TCP
1431
1432 ~=3 UDP
1433 )))
1434 |(% style="width:220px" %)HSW11010|(% style="width:336px" %)Reserved
1435 |(% rowspan="7" style="width:40px" %)2|(% colspan="1" rowspan="7" style="width:295px" %)Ethernet parameter configuration for communication number 2 in list. Configure those addresses according to connected device. After configuration, wait for 5 seconds and restart the HMI.|(% style="width:220px" %)HSW11011|(% style="width:336px" %)Device IP address high word 1
1436 |(% style="width:220px" %)HSW11012|(% style="width:336px" %)Device IP address high word 2
1437 |(% style="width:220px" %)HSW11013|(% style="width:336px" %)Device IP address high word 3
1438 |(% style="width:220px" %)HSW11014|(% style="width:336px" %)Device IP address high word 4
1439 |(% style="width:220px" %)HSW11015|(% style="width:336px" %)Device Port number
1440 |(% style="width:220px" %)HSW11016|(% style="width:336px" %)(((
1441 ~=2 TCP
1442
1443 ~=3 UDP
1444 )))
1445 |(% style="width:220px" %)HSW11017|(% style="width:336px" %)Reserved
1446 |(% style="width:40px" %)…|(% style="width:295px" %) |(% style="width:220px" %)…|(% style="width:336px" %)…
1447 |(% rowspan="7" style="width:40px" %)32|(% colspan="1" rowspan="7" style="width:295px" %)Ethernet parameter configuration for communication number 32 in list. Configure those addresses according to connected device. After configuration, wait for 5 seconds and restart the HMI.|(% style="width:220px" %)HSW11221|(% style="width:336px" %)Device IP address high word 1
1448 |(% style="width:220px" %)HSW11222|(% style="width:336px" %)Device IP address high word 2
1449 |(% style="width:220px" %)HSW11223|(% style="width:336px" %)Device IP address high word 3
1450 |(% style="width:220px" %)HSW11224|(% style="width:336px" %)Device IP address high word 4
1451 |(% style="width:220px" %)HSW11225|(% style="width:336px" %)Device Port number
1452 |(% style="width:220px" %)HSW11226|(% style="width:336px" %)(((
1453 ~=2 TCP;
1454
1455 ~=3 UDP
1456 )))
1457 |(% style="width:220px" %)HSW11227|(% style="width:336px" %)Reserved
1458
1459 (% class="box infomessage" %)
1460 (((
1461 **✎Note:** The number of Ethernet connections supported by different HMI series varies.
1462 )))
1463
1464 == Communication control ==
1465
1466 (% class="table-bordered" %)
1467 |=(% style="width: 135px;" %)**Communication No.**|=(% style="width: 102px;" %)**Station No.**|=(% style="width: 185px;" %)**Control bit**|=(% style="width: 191px;" %)**Communication lamp**|=(% style="width: 271px;" %)**Description**
1468 |(% colspan="1" rowspan="16" style="width:135px" %)1|(% style="width:102px" %)0~~15|(% style="width:185px" %)HSX550.0～HSX550.15|(% style="width:191px" %)HSX558.0～HSX558.15|(% rowspan="160" style="width:271px" %)Communication number refers to the number in "Communication Port Configuration". A number provides 256 device station numbers. Each station number corresponds to a communication control bit and a communication indicator bit. Registers HSX550.0 to HSX805.15 are used to control the station numbers from 0 to 127, and registers HSX1150.0 to HSX1405.15 are used to control station numbers 128 to 255.
1469 |(% style="width:102px" %)16~~31|(% style="width:185px" %)HSX551.0～HSX551.15|(% style="width:191px" %)HSX559.0～HSX559.15
1470 |(% style="width:102px" %)32~~47|(% style="width:185px" %)HSX552.0～HSX552.15|(% style="width:191px" %)HSX560.0～HSX560.15
1471 |(% style="width:102px" %)48~~63|(% style="width:185px" %)HSX553.0～HSX553.15|(% style="width:191px" %)HSX561.0～HSX561.15
1472 |(% style="width:102px" %)64～79|(% style="width:185px" %)HSX554.0～HSX554.15|(% style="width:191px" %)HSX562.0～HSX562.15
1473 |(% style="width:102px" %)80～95|(% style="width:185px" %)HSX555.0～HSX555.15|(% style="width:191px" %)HSX563.0～HSX563.15
1474 |(% style="width:102px" %)96～111|(% style="width:185px" %)HSX556.0～HSX556.15|(% style="width:191px" %)HSX564.0～HSX564.15
1475 |(% style="width:102px" %)112～127|(% style="width:185px" %)HSX557.0～HSX557.15|(% style="width:191px" %)HSX565.0～HSX565.15
1476 |(% style="width:102px" %)128～143|(% style="width:185px" %)HSX1150.0～HSX1150.15|(% style="width:191px" %)HSX1158.0～HSX1158.15
1477 |(% style="width:102px" %)144～159|(% style="width:185px" %)HSX1151.0～HSX1151.15|(% style="width:191px" %)HSX1159.0～HSX1159.15
1478 |(% style="width:102px" %)160～175|(% style="width:185px" %)HSX1152.0～HSX1152.15|(% style="width:191px" %)HSX1160.0～HSX1160.15
1479 |(% style="width:102px" %)176～191|(% style="width:185px" %)HSX1153.0～HSX1153.15|(% style="width:191px" %)HSX1161.0～HSX1161.15
1480 |(% style="width:102px" %)192～207|(% style="width:185px" %)HSX1154.0～HSX1154.15|(% style="width:191px" %)HSX1162.0～HSX1162.15
1481 |(% style="width:102px" %)208～223|(% style="width:185px" %)HSX1155.0～HSX1155.15|(% style="width:191px" %)HSX1163.0～HSX1163.15
1482 |(% style="width:102px" %)224～239|(% style="width:185px" %)HSX1156.0～HSX1156.15|(% style="width:191px" %)HSX1164.0～HSX1164.15
1483 |(% style="width:102px" %)240～255|(% style="width:185px" %)HSX1157.0～HSX1157.15|(% style="width:191px" %)HSX1165.0～HSX1165.15
1484 |(% colspan="1" rowspan="16" style="width:135px" %)2|(% style="width:102px" %)0～15|(% style="width:185px" %)HSX566.0～HSX566.15|(% style="width:191px" %)HSX574.0～HSX574.15
1485 |(% style="width:102px" %)16～31|(% style="width:185px" %)HSX567.0～HSX567.15|(% style="width:191px" %)HSX575.0～HSX575.15
1486 |(% style="width:102px" %)32～47|(% style="width:185px" %)HSX568.0～HSX568.15|(% style="width:191px" %)HSX576.0～HSX576.15
1487 |(% style="width:102px" %)48～63|(% style="width:185px" %)HSX569.0～HSX569.15|(% style="width:191px" %)HSX577.0～HSX577.15
1488 |(% style="width:102px" %)64～79|(% style="width:185px" %)HSX570.0～HSX570.15|(% style="width:191px" %)HSX578.0～HSX578.15
1489 |(% style="width:102px" %)80～95|(% style="width:185px" %)HSX571.0～HSX571.15|(% style="width:191px" %)HSX579.0～HSX579.15
1490 |(% style="width:102px" %)96～111|(% style="width:185px" %)HSX572.0～HSX572.15|(% style="width:191px" %)HSX580.0～HSX580.15
1491 |(% style="width:102px" %)112～127|(% style="width:185px" %)HSX573.0～HSX573.15|(% style="width:191px" %)HSX581.0～HSX581.15
1492 |(% style="width:102px" %)128～143|(% style="width:185px" %)HSX1166.0～HSX1166.15|(% style="width:191px" %)HSX1174.0～HSX1174.15
1493 |(% style="width:102px" %)144～159|(% style="width:185px" %)HSX1167.0～HSX1167.15|(% style="width:191px" %)HSX1175.0～HSX1175.15
1494 |(% style="width:102px" %)160～175|(% style="width:185px" %)HSX1168.0～HSX1168.15|(% style="width:191px" %)HSX1176.0～HSX1176.15
1495 |(% style="width:102px" %)176～191|(% style="width:185px" %)HSX1169.0～HSX1169.15|(% style="width:191px" %)HSX1177.0～HSX1177.15
1496 |(% style="width:102px" %)192～207|(% style="width:185px" %)HSX1170.0～HSX1170.15|(% style="width:191px" %)HSX1178.0～HSX1178.15
1497 |(% style="width:102px" %)208～223|(% style="width:185px" %)HSX1171.0～HSX1171.15|(% style="width:191px" %)HSX1179.0～HSX1179.15
1498 |(% style="width:102px" %)224～239|(% style="width:185px" %)HSX1172.0～HSX1172.15|(% style="width:191px" %)HSX1180.0～HSX1180.15
1499 |(% style="width:102px" %)240～255|(% style="width:185px" %)HSX1173.0～HSX1173.15|(% style="width:191px" %)HSX1181.0～HSX1181.15
1500 |(% colspan="1" rowspan="16" style="width:135px" %)3|(% style="width:102px" %)0～15|(% style="width:185px" %)HSX582.0～HSX582.15|(% style="width:191px" %)HSX590.0～HSX590.15
1501 |(% style="width:102px" %)16～31|(% style="width:185px" %)HSX583.0～HSX583.15|(% style="width:191px" %)HSX591.0～HSX591.15
1502 |(% style="width:102px" %)32～47|(% style="width:185px" %)HSX584.0～HSX584.15|(% style="width:191px" %)HSX592.0～HSX592.15
1503 |(% style="width:102px" %)48～63|(% style="width:185px" %)HSX585.0～HSX585.15|(% style="width:191px" %)HSX593.0～HSX593.15
1504 |(% style="width:102px" %)64～79|(% style="width:185px" %)HSX586.0～HSX586.15|(% style="width:191px" %)HSX594.0～HSX594.15
1505 |(% style="width:102px" %)80～95|(% style="width:185px" %)HSX587.0～HSX587.15|(% style="width:191px" %)HSX595.0～HSX595.15
1506 |(% style="width:102px" %)96～111|(% style="width:185px" %)HSX588.0～HSX588.15|(% style="width:191px" %)HSX596.0～HSX596.15
1507 |(% style="width:102px" %)112～127|(% style="width:185px" %)HSX589.0～HSX589.15|(% style="width:191px" %)HSX597.0～HSX597.15
1508 |(% style="width:102px" %)128～143|(% style="width:185px" %)HSX1182.0～HSX1182.15|(% style="width:191px" %)HSX1190.0～HSX1190.15
1509 |(% style="width:102px" %)144～159|(% style="width:185px" %)HSX1183.0～HSX1183.15|(% style="width:191px" %)HSX1191.0～HSX1191.15
1510 |(% style="width:102px" %)160～175|(% style="width:185px" %)HSX1184.0～HSX1184.15|(% style="width:191px" %)HSX1192.0～HSX1192.15
1511 |(% style="width:102px" %)176～191|(% style="width:185px" %)HSX1185.0～HSX1185.15|(% style="width:191px" %)HSX1193.0～HSX1193.15
1512 |(% style="width:102px" %)192～207|(% style="width:185px" %)HSX1186.0～HSX1186.15|(% style="width:191px" %)HSX1194.0～HSX1194.15
1513 |(% style="width:102px" %)208～223|(% style="width:185px" %)HSX1187.0～HSX1187.15|(% style="width:191px" %)HSX1195.0～HSX1195.15
1514 |(% style="width:102px" %)224～239|(% style="width:185px" %)HSX1188.0～HSX1188.15|(% style="width:191px" %)HSX1196.0～HSX1196.15
1515 |(% style="width:102px" %)240～255|(% style="width:185px" %)HSX1189.0～HSX1189.15|(% style="width:191px" %)HSX1197.0～HSX1197.15
1516 |(% colspan="1" rowspan="16" style="width:135px" %)4|(% style="width:102px" %)0～15|(% style="width:185px" %)HSX598.0～HSX598.15|(% style="width:191px" %)HSX606.0～HSX606.15
1517 |(% style="width:102px" %)16～31|(% style="width:185px" %)HSX599.0～HSX599.15|(% style="width:191px" %)HSX607.0～HSX607.15
1518 |(% style="width:102px" %)32～47|(% style="width:185px" %)HSX600.0～HSX600.15|(% style="width:191px" %)HSX608.0～HSX608.15
1519 |(% style="width:102px" %)48～63|(% style="width:185px" %)HSX601.0～HSX601.15|(% style="width:191px" %)HSX609.0～HSX609.15
1520 |(% style="width:102px" %)64～79|(% style="width:185px" %)HSX602.0～HSX602.15|(% style="width:191px" %)HSX610.0～HSX610.15
1521 |(% style="width:102px" %)80～95|(% style="width:185px" %)HSX603.0～HSX603.15|(% style="width:191px" %)HSX611.0～HSX611.15
1522 |(% style="width:102px" %)96～111|(% style="width:185px" %)HSX604.0～HSX604.15|(% style="width:191px" %)HSX612.0～HSX612.15
1523 |(% style="width:102px" %)112～127|(% style="width:185px" %)HSX605.0～HSX605.15|(% style="width:191px" %)HSX613.0～HSX613.15
1524 |(% style="width:102px" %)128～143|(% style="width:185px" %)HSX1198.0～HSX1198.15|(% style="width:191px" %)HSX1206.0～HSX1206.15
1525 |(% style="width:102px" %)144～159|(% style="width:185px" %)HSX1199.0～HSX1199.15|(% style="width:191px" %)HSX1207.0～HSX1207.15
1526 |(% style="width:102px" %)160～175|(% style="width:185px" %)HSX1200.0～HSX1200.15|(% style="width:191px" %)HSX1208.0～HSX1208.15
1527 |(% style="width:102px" %)176～191|(% style="width:185px" %)HSX1201.0～HSX1201.15|(% style="width:191px" %)HSX1209.0～HSX1209.15
1528 |(% style="width:102px" %)192～207|(% style="width:185px" %)HSX1202.0～HSX1202.15|(% style="width:191px" %)HSX1210.0～HSX1210.15
1529 |(% style="width:102px" %)208～223|(% style="width:185px" %)HSX1203.0～HSX1203.15|(% style="width:191px" %)HSX1211.0～HSX1211.15
1530 |(% style="width:102px" %)224～239|(% style="width:185px" %)HSX1204.0～HSX1204.15|(% style="width:191px" %)HSX1212.0～HSX1212.15
1531 |(% style="width:102px" %)240～255|(% style="width:185px" %)HSX1205.0～HSX1205.15|(% style="width:191px" %)HSX1213.0～HSX1213.15
1532 |(% colspan="1" rowspan="16" style="width:135px" %)5|(% style="width:102px" %)0～15|(% style="width:185px" %)HSX614.0～HSX614.15|(% style="width:191px" %)HSX622.0～HSX622.15
1533 |(% style="width:102px" %)16～31|(% style="width:185px" %)HSX615.0～HSX615.15|(% style="width:191px" %)HSX623.0～HSX623.15
1534 |(% style="width:102px" %)32～47|(% style="width:185px" %)HSX616.0～HSX616.15|(% style="width:191px" %)HSX624.0～HSX624.15
1535 |(% style="width:102px" %)48～63|(% style="width:185px" %)HSX617.0～HSX617.15|(% style="width:191px" %)HSX625.0～HSX625.15
1536 |(% style="width:102px" %)64～79|(% style="width:185px" %)HSX618.0～HSX618.15|(% style="width:191px" %)HSX626.0～HSX626.15
1537 |(% style="width:102px" %)80～95|(% style="width:185px" %)HSX619.0～HSX619.15|(% style="width:191px" %)HSX627.0～HSX627.15
1538 |(% style="width:102px" %)96～111|(% style="width:185px" %)HSX620.0～HSX620.15|(% style="width:191px" %)HSX628.0～HSX628.15
1539 |(% style="width:102px" %)112～127|(% style="width:185px" %)HSX621.0～HSX621.15|(% style="width:191px" %)HSX629.0～HSX629.15
1540 |(% style="width:102px" %)128～143|(% style="width:185px" %)HSX1214.0～HSX1214.15|(% style="width:191px" %)HSX1222.0～HSX1222.15
1541 |(% style="width:102px" %)144～159|(% style="width:185px" %)HSX1215.0～HSX1215.15|(% style="width:191px" %)HSX1223.0～HSX1223.15
1542 |(% style="width:102px" %)160～175|(% style="width:185px" %)HSX1216.0～HSX1216.15|(% style="width:191px" %)HSX1224.0～HSX1224.15
1543 |(% style="width:102px" %)176～191|(% style="width:185px" %)HSX1217.0～HSX1217.15|(% style="width:191px" %)HSX1225.0～HSX1225.15
1544 |(% style="width:102px" %)192～207|(% style="width:185px" %)HSX1218.0～HSX1218.15|(% style="width:191px" %)HSX1226.0～HSX1226.15
1545 |(% style="width:102px" %)208～223|(% style="width:185px" %)HSX1219.0～HSX1219.15|(% style="width:191px" %)HSX1227.0～HSX1227.15
1546 |(% style="width:102px" %)224～239|(% style="width:185px" %)HSX1220.0～HSX1220.15|(% style="width:191px" %)HSX1228.0～HSX1228.15
1547 |(% style="width:102px" %)240～255|(% style="width:185px" %)HSX1221.0～HSX1221.15|(% style="width:191px" %)HSX1229.0～HSX1229.15
1548 |(% colspan="1" rowspan="16" style="width:135px" %)6|(% style="width:102px" %)0～15|(% style="width:185px" %)HSX630.0～HSX630.15|(% style="width:191px" %)HSX638.0～HSX638.15
1549 |(% style="width:102px" %)16～31|(% style="width:185px" %)HSX631.0～HSX631.15|(% style="width:191px" %)HSX639.0～HSX639.15
1550 |(% style="width:102px" %)32～47|(% style="width:185px" %)HSX632.0～HSX632.15|(% style="width:191px" %)HSX640.0～HSX640.15
1551 |(% style="width:102px" %)48～63|(% style="width:185px" %)HSX633.0～HSX633.15|(% style="width:191px" %)HSX641.0～HSX641.15
1552 |(% style="width:102px" %)64～79|(% style="width:185px" %)HSX634.0～HSX634.15|(% style="width:191px" %)HSX642.0～HSX642.15
1553 |(% style="width:102px" %)80～95|(% style="width:185px" %)HSX635.0～HSX635.15|(% style="width:191px" %)HSX643.0～HSX643.15
1554 |(% style="width:102px" %)96～111|(% style="width:185px" %)HSX636.0～HSX636.15|(% style="width:191px" %)HSX644.0～HSX644.15
1555 |(% style="width:102px" %)112～127|(% style="width:185px" %)HSX637.0～HSX637.15|(% style="width:191px" %)HSX645.0～HSX645.15
1556 |(% style="width:102px" %)128～143|(% style="width:185px" %)HSX1230.0～HSX1230.15|(% style="width:191px" %)HSX1238.0～HSX1238.15
1557 |(% style="width:102px" %)144～159|(% style="width:185px" %)HSX1231.0～HSX1231.15|(% style="width:191px" %)HSX1239.0～HSX1239.15
1558 |(% style="width:102px" %)160～175|(% style="width:185px" %)HSX1232.0～HSX1232.15|(% style="width:191px" %)HSX1240.0～HSX1240.15
1559 |(% style="width:102px" %)176～191|(% style="width:185px" %)HSX1233.0～HSX1233.15|(% style="width:191px" %)HSX1241.0～HSX1241.15
1560 |(% style="width:102px" %)192～207|(% style="width:185px" %)HSX1234.0～HSX1234.15|(% style="width:191px" %)HSX1242.0～HSX1242.15
1561 |(% style="width:102px" %)208～223|(% style="width:185px" %)HSX1235.0～HSX1235.15|(% style="width:191px" %)HSX1243.0～HSX1243.15
1562 |(% style="width:102px" %)224～239|(% style="width:185px" %)HSX1236.0～HSX1236.15|(% style="width:191px" %)HSX1244.0～HSX1244.15
1563 |(% style="width:102px" %)240～255|(% style="width:185px" %)HSX1237.0～HSX1237.15|(% style="width:191px" %)HSX1245.0～HSX1245.15
1564 |(% colspan="1" rowspan="16" style="width:135px" %)7|(% style="width:102px" %)0～15|(% style="width:185px" %)HSX646.0～HSX646.15|(% style="width:191px" %)HSX654.0～HSX654.15
1565 |(% style="width:102px" %)16～31|(% style="width:185px" %)HSX647.0～HSX647.15|(% style="width:191px" %)HSX655.0～HSX655.15
1566 |(% style="width:102px" %)32～47|(% style="width:185px" %)HSX648.0～HSX648.15|(% style="width:191px" %)HSX656.0～HSX656.15
1567 |(% style="width:102px" %)48～63|(% style="width:185px" %)HSX649.0～HSX649.15|(% style="width:191px" %)HSX657.0～HSX657.15
1568 |(% style="width:102px" %)64～79|(% style="width:185px" %)HSX650.0～HSX650.15|(% style="width:191px" %)HSX658.0～HSX658.15
1569 |(% style="width:102px" %)80～95|(% style="width:185px" %)HSX651.0～HSX651.15|(% style="width:191px" %)HSX659.0～HSX659.15
1570 |(% style="width:102px" %)96～111|(% style="width:185px" %)HSX652.0～HSX652.15|(% style="width:191px" %)HSX660.0～HSX660.15
1571 |(% style="width:102px" %)112～127|(% style="width:185px" %)HSX653.0～HSX653.15|(% style="width:191px" %)HSX661.0～HSX661.15
1572 |(% style="width:102px" %)128～143|(% style="width:185px" %)HSX1246.0～HSX1246.15|(% style="width:191px" %)HSX1254.0～HSX1254.15
1573 |(% style="width:102px" %)144～159|(% style="width:185px" %)HSX1247.0～HSX1247.15|(% style="width:191px" %)HSX1255.0～HSX1255.15
1574 |(% style="width:102px" %)160～175|(% style="width:185px" %)HSX1248.0～HSX1248.15|(% style="width:191px" %)HSX1256.0～HSX1256.15
1575 |(% style="width:102px" %)176～191|(% style="width:185px" %)HSX1249.0～HSX1249.15|(% style="width:191px" %)HSX1257.0～HSX1257.15
1576 |(% style="width:102px" %)192～207|(% style="width:185px" %)HSX1250.0～HSX1250.15|(% style="width:191px" %)HSX1258.0～HSX1258.15
1577 |(% style="width:102px" %)208～223|(% style="width:185px" %)HSX1251.0～HSX1251.15|(% style="width:191px" %)HSX1259.0～HSX1259.15
1578 |(% style="width:102px" %)224～239|(% style="width:185px" %)HSX1252.0～HSX1252.15|(% style="width:191px" %)HSX1260.0～HSX1260.15
1579 |(% style="width:102px" %)240～255|(% style="width:185px" %)HSX1253.0～HSX1253.15|(% style="width:191px" %)HSX1261.0～HSX1261.15
1580 |(% colspan="1" rowspan="16" style="width:135px" %)8|(% style="width:102px" %)0～15|(% style="width:185px" %)HSX662.0～HSX662.15|(% style="width:191px" %)HSX670.0～HSX670.15
1581 |(% style="width:102px" %)16～31|(% style="width:185px" %)HSX663.0～HSX663.15|(% style="width:191px" %)HSX671.0～HSX671.15
1582 |(% style="width:102px" %)32～47|(% style="width:185px" %)HSX664.0～HSX664.15|(% style="width:191px" %)HSX672.0～HSX672.15
1583 |(% style="width:102px" %)48～63|(% style="width:185px" %)HSX665.0～HSX665.15|(% style="width:191px" %)HSX673.0～HSX673.15
1584 |(% style="width:102px" %)64～79|(% style="width:185px" %)HSX666.0～HSX666.15|(% style="width:191px" %)HSX674.0～HSX674.15
1585 |(% style="width:102px" %)80～95|(% style="width:185px" %)HSX667.0～HSX667.15|(% style="width:191px" %)HSX675.0～HSX675.15
1586 |(% style="width:102px" %)96～111|(% style="width:185px" %)HSX668.0～HSX668.15|(% style="width:191px" %)HSX676.0～HSX676.15
1587 |(% style="width:102px" %)112～127|(% style="width:185px" %)HSX669.0～HSX669.15|(% style="width:191px" %)HSX677.0～HSX677.15
1588 |(% style="width:102px" %)128～143|(% style="width:185px" %)HSX1262.0～HSX1262.15|(% style="width:191px" %)HSX1270.0～HSX1270.15
1589 |(% style="width:102px" %)144～159|(% style="width:185px" %)HSX1263.0～HSX1263.15|(% style="width:191px" %)HSX1271.0～HSX1271.15
1590 |(% style="width:102px" %)160～175|(% style="width:185px" %)HSX1264.0～HSX1264.15|(% style="width:191px" %)HSX1272.0～HSX1272.15
1591 |(% style="width:102px" %)176～191|(% style="width:185px" %)HSX1265.0～HSX1265.15|(% style="width:191px" %)HSX1273.0～HSX1273.15
1592 |(% style="width:102px" %)192～207|(% style="width:185px" %)HSX1266.0～HSX1266.15|(% style="width:191px" %)HSX1274.0～HSX1274.15
1593 |(% style="width:102px" %)208～223|(% style="width:185px" %)HSX1267.0～HSX1267.15|(% style="width:191px" %)HSX1275.0～HSX1275.15
1594 |(% style="width:102px" %)224～239|(% style="width:185px" %)HSX1268.0～HSX1268.15|(% style="width:191px" %)HSX1276.0～HSX1276.15
1595 |(% style="width:102px" %)240～255|(% style="width:185px" %)HSX1269.0～HSX1269.15|(% style="width:191px" %)HSX1277.0～HSX1277.15
1596 |(% rowspan="4" style="width:135px" %)9|(% style="width:102px" %)0~~15|(% style="width:185px" %)HSX678.0~~678.15|(% style="width:191px" %)HSX686.0~~686.15
1597 |(% style="width:102px" %)16~~31|(% style="width:185px" %)HSX679.0~~679.15|(% style="width:191px" %)HSX687.0~~687.15
1598 |(% style="width:102px" %)32~~47|(% style="width:185px" %)HSX680.0~~680.15|(% style="width:191px" %)HSX688.0~~688.15
1599 |(% style="width:102px" %)48~~63|(% style="width:185px" %)HSX681.0~~681.15|(% style="width:191px" %)HSX689.0~~689.15
1600 |(% rowspan="4" style="width:135px" %)10|(% style="width:102px" %)0~~15|(% style="width:185px" %)HSX694.0~~694.15|(% style="width:191px" %)HSX702.0~~702.15
1601 |(% style="width:102px" %)16~~31|(% style="width:185px" %)HSX695.0~~695.15|(% style="width:191px" %)HSX703.0~~703.15
1602 |(% style="width:102px" %)32~~47|(% style="width:185px" %)HSX696.0~~696.15|(% style="width:191px" %)HSX704.0~~704.15
1603 |(% style="width:102px" %)48~~63|(% style="width:185px" %)HSX697.0~~697.15|(% style="width:191px" %)HSX705.0~~705.15
1604 |(% rowspan="4" style="width:135px" %)11|(% style="width:102px" %)0~~15|(% style="width:185px" %)HSX710.0~~710.15|(% style="width:191px" %)HSX718.0~~718.15
1605 |(% style="width:102px" %)16~~31|(% style="width:185px" %)HSX711.0~~711.15|(% style="width:191px" %)HSX719.0~~719.15
1606 |(% style="width:102px" %)32~~47|(% style="width:185px" %)HSX712.0~~712.15|(% style="width:191px" %)HSX720.0~~720.15
1607 |(% style="width:102px" %)48~~63|(% style="width:185px" %)HSX713.0~~713.15|(% style="width:191px" %)HSX721.0~~721.15
1608 |(% rowspan="4" style="width:135px" %)12|(% style="width:102px" %)0~~15|(% style="width:185px" %)HSX726.0~~726.15|(% style="width:191px" %)HSX734.0~~734.15
1609 |(% style="width:102px" %)16~~31|(% style="width:185px" %)HSX727.0~~727.15|(% style="width:191px" %)HSX735.0~~735.15
1610 |(% style="width:102px" %)32~~47|(% style="width:185px" %)HSX728.0~~728.15|(% style="width:191px" %)HSX736.0~~736.15
1611 |(% style="width:102px" %)48~~63|(% style="width:185px" %)HSX729.0~~729.15|(% style="width:191px" %)HSX737.0~~737.15
1612 |(% rowspan="4" style="width:135px" %)13|(% style="width:102px" %)0~~15|(% style="width:185px" %)HSX742.0~~742.15|(% style="width:191px" %)HSX750.0~~750.15
1613 |(% style="width:102px" %)16~~31|(% style="width:185px" %)HSX743.0~~743.15|(% style="width:191px" %)HSX751.0~~751.15
1614 |(% style="width:102px" %)32~~47|(% style="width:185px" %)HSX744.0~~744.15|(% style="width:191px" %)HSX752.0~~752.15
1615 |(% style="width:102px" %)48~~63|(% style="width:185px" %)HSX745.0~~745.15|(% style="width:191px" %)HSX753.0~~753.15
1616 |(% rowspan="4" style="width:135px" %)14|(% style="width:102px" %)0~~15|(% style="width:185px" %)HSX758.0~~758.15|(% style="width:191px" %)HSX766.0~~766.15
1617 |(% style="width:102px" %)16~~31|(% style="width:185px" %)HSX759.0~~759.15|(% style="width:191px" %)HSX767.0~~767.15
1618 |(% style="width:102px" %)32~~47|(% style="width:185px" %)HSX760.0~~760.15|(% style="width:191px" %)HSX768.0~~768.15
1619 |(% style="width:102px" %)48~~63|(% style="width:185px" %)HSX761.0~~761.15|(% style="width:191px" %)HSX769.0~~769.15
1620 |(% rowspan="4" style="width:135px" %)15|(% style="width:102px" %)0~~15|(% style="width:185px" %)HSX774.0~~774.15|(% style="width:191px" %)HSX782.0~~782.15
1621 |(% style="width:102px" %)16~~31|(% style="width:185px" %)HSX775.0~~775.15|(% style="width:191px" %)HSX783.0~~783.15
1622 |(% style="width:102px" %)32~~47|(% style="width:185px" %)HSX776.0~~776.15|(% style="width:191px" %)HSX784.0~~784.15
1623 |(% style="width:102px" %)48~~63|(% style="width:185px" %)HSX777.0~~777.15|(% style="width:191px" %)HSX785.0~~785.15
1624 |(% rowspan="4" style="width:135px" %)16|(% style="width:102px" %)0~~15|(% style="width:185px" %)HSX790.0~~790.15|(% style="width:191px" %)HSX798.0~~798.15
1625 |(% style="width:102px" %)16~~31|(% style="width:185px" %)HSX791.0~~791.15|(% style="width:191px" %)HSX799.0~~799.15
1626 |(% style="width:102px" %)32~~47|(% style="width:185px" %)HSX792.0~~792.15|(% style="width:191px" %)HSX800.0~~800.15
1627 |(% style="width:102px" %)48~~63|(% style="width:185px" %)HSX793.0~~793.15|(% style="width:191px" %)HSX801.0~~801.15