Wiki source code of 13 HMI Internal Registers

Version 5.2 by xingzhi lin on 2025/09/24 10:21

version	line-number	content
1.1	1	= Introduction =
	2
	3	HMI provide four types of HMI address for user. You can use them as temporary variables of the program. The use is consistent with the way access to the PLC register. You could also reference through the address, PIStudio provides three types of such memory.
	4
	5	*HSW, HDW, HUW, HAW are word address, HSX, HDX, HUX, HAX are bit address.
	6
	7	* System data area (HSW): A special register defined by the system.
	8	* Data storage area (HDW/HDX): Users store user data.
	9	* System data area (HUW): A special register defined by the system.
	10	* System Data (HAW): System register used for power-off save.
	11	* Recipe index area (RPW): System register used for recipe index.
	12
	13	HMI internal registers are divided into bit address and word address, which can be accessed in two ways (take HDW as an example).
	14
	15	* Access as word with the prefix "HDW".
	16	** HDW0 means the 1st word of system data area. HDW1 means the 2nd word of system data area.
	17	* Access as bit with the prefix "HDX". The number before "." i". The number before Access in bit with the prefix "HD". The number before Access in bit with the prefix "HDX". The number before "." indicates the number of the word. The number after "." indicates the bit number of the word.
	18	** HDX1020.12 means to access the system data area in bit mode, the specific location is the 13th bit of the 1020 word.
	19
	20	(% class="box infomessage" %)
	21	(((
	22	✎Note:
	23
	24	* Addresses in HDX are the bits from words in HDW, so be careful when using addresses. For example, HDX1020.12 is the 13th bit to access the 1020 word. The value of this bit is the same as that of the word accessed through HDW001020. The 13th bit of this word is actually the same bit as HDX1020.12.
	25	* The address of the bit address HDX is with a decimal point while word addresses are integers.
	26	)))
	27
	28	= Address ranges table =
	29
	30	(% style="text-align:center" %)
	31	[[image:6.png]]
	32
	33	= Data storage area (HDW/HDX) =
	34
	35	It is used to save the temporary data of project.
	36
	37	1. Access as word, and serial number range is from HDW0 to HDW299999.
	38	1. Access as bit, and serial number range is from HDX0.0 to HDX299999.15.
	39
	40	= Power-down save area (HAW/HAX) =
	41
	42	It is system registers used for power-off save.
	43
	44	1. Access as word, and serial number range is from HAW0 to HAW199999.
	45	1. Access as bit, and serial number range is from HAX0.0 to HAX199999.15.
	46
	47	(% class="box infomessage" %)
	48	(((
	49	✎Note:
	50
	51	* HAW/HAX is power-down retention. The register of this type is able to save the data before the power-down.
	52	* To avoid possible device failure, do not immediately power off and reboot when configuring the power-down save addre
	53	)))
	54
	55	= Recipe index area (RPW) =
	56
	57	It is system recipe data power-off save register. The range is from RPW000000 to RPW990450.
	58
	59	(% class="box infomessage" %)
	60	(((
	61	✎Note:
	62
	63	* RPW is power-down retention. The register of this type is able to save the data before the power-down.
	64	* To avoid possible device failure, do not immediately power off and reboot when configuring the power-down save addre
	65	)))
	66
	67	= Single user data area (HUW/HUX) =
	68
	69	It is used for system special registers (reserved by system).
	70
	71	1. Access as word, and serial number range is from HUW0 to HUW1599.
	72	1. Access as bit, and serial number range is from HUX0.0 to HUX1599.15.
	73
	74	(% class="box infomessage" %)
	75	(((
	76	✎Note:
	77
	78	* HUW/HUX is a system special register, so please check the system special register list during use. Please use the address specified in the table and do not use the address which is not mentioned in the table.
	79	)))
	80
	81	(% class="table-bordered" %)
	82	\|=Special register address\|=Description\|=Function
	83	\|=HUW0\|Screen switch\|A single terminal controls the screen switching, and all terminals do not affect each other.
	84	\|=HUW110~~HUW119\|(% rowspan="26" %)Addresses of the built-in keyboard\|The T9 input method stores the selected seria number length
	85	\|=HUW120~~HUW129\|The T9 input method stores the selected Chinese Pinyin length
	86	\|=HUW135\|Input method: first input
	87	\|=HUW136\|Button: T9 Chinese Pinyin page
	88	\|=HUW137\|Button: T9 Chinese characters page
	89	\|=HUW138\|Button: symbol
	90	\|=HUW139\|Button: switch
	91	\|=HUW140\|Button: Chinese characters 1
	92	\|=HUW142\|Button: Chinese characters 2
	93	\|=HUW144\|Button: Chinese characters 3
	94	\|=HUW146\|Button: Chinese characters 4
	95	\|=HUW148\|Button: Chinese characters 5
	96	\|=HUW150\|Button: Chinese characters 6
	97	\|=HUW152\|Button: Chinese characters 7
	98	\|=HUW154\|Button: Chinese characters 8
	99	\|=HUW156\|Button: Chinese characters 9
	100	\|=HUW158\|Button: Chinese characters 10
	101	\|=HUW160~~HUW169\|Button: Chinese Pinyin 1
	102	\|=HUW170~~HUW179\|Button: Chinese Pinyin 2
	103	\|=HUW180~~HUW189\|Button: Chinese Pinyin 3
	104	\|=HUW190~~HUW199\|Button: Chinese Pinyin 4
	105	\|=HUW200~~HUW699\|Input method cache length
	106	\|=HUW700~~HUW749\|Minimum value of the input method
	107	\|=HUW750~~HUW799\|Maximum value of the input method
	108	\|=HUW800\|Case switching of the input method
	109	\|=HUW801~~HUW900\|Input method format cache length
	110	\|=HUW1000\|(% rowspan="12" %)Addresses of user permission\|OK (Sign in)
	111	\|=HUW1001\|Result of operation
	112	\|=HUW1002~~1005\|Old password
	113	\|=HUW1006~~1009\|New password
	114	\|=HUW1010~~1013\|Confirm password
	115	\|=HUW1014~~1029\|New user name
	116	\|=HUW1030~~1157\|States information of user permission
	117	\|=HUW1158~~1335\|User name (Only or drop-down list object)
	118	\|=HUW1336~~1345\|User name description or note
	119	\|=HUW1347\|Hidden function configurations
	120	\|=HUW1348\|Permission settings
	121	\|=HUW1349\|Current user name
	122	\|=HUW1382\|User sign in way\|(((
	123	* 0: Select the user name from drop-down list object for signing in
	124	* 1: Enter the user name in Character Input/Display object for signing in (HUW1014)
	125	)))
	126	\|=HUW1400\|Time interval from last operation\|(((
	127	Shows how long the touch screen has not been clicked, in seconds. 32-bit unsigned integer
	128
	129	✎Note: Clicking by different users will only clear the corresponding register of the currently operating terminal, and the registers on other terminals (such as mobile phones, computers) will not be cleared.
	130	)))
	131	\|=HUW1402\|Keyboard note\|It saves the text information of the keyboard notes when clicking object(HUW1402-HUW1433)
	132	\|=HUW1436\|Current object level\|Indicate current object security level
5.2	133	\|=HUW1502\|Touch status prompt\|(((
	134	* 0: Not touching
	135	* 1: Touching
	136	)))
1.1	137
	138	= Special data area (HSW/HSX) =
	139
	140	It is used for system special registers (reserved by system).
	141
	142	1. Access as word, and serial number range is from HSW0 to HSW49999. (HSW10000 to HSW19999 are the power-off storage areas)
	143	1. Access as bit, and serial number range is from HSX0.0 to HSX49999.15.
	144
	145	(% class="box infomessage" %)
	146	(((
	147	✎Note:
	148
	149	* HSW / HSX are a system special register, so please check the system special register list during use. Please use the address specified in the table and do not use the address which is not mentioned in the table.
	150	* To avoid possible device failure, do not immediately power off and reboot when configuring the power-down save address.
	151	)))
	152
2.1	153	(% class="table-bordered" style="margin-left:auto; margin-right:auto; width:1024px" %)
1.1	154	\|=(% scope="row" style="width: 160px;" %)Address\|=(% style="width: 282px;" %)Function\|=(% style="width: 452px;" %)Description
	155	\|=(% style="width: 160px;" %)HSW0\|(% style="width:282px" %)Language switch\|(% style="width:452px" %)Multiple language could be set in the project, HMI support maximum 8 languages. (Power-down save supported)
	156	\|=(% style="width: 160px;" %)HSW1\|(% style="width:282px" %)Beep frequency (Only valid in HMI V1.0 System)\|(% style="width:452px" %)Frequency range: 0~~4000
	157	\|=(% style="width: 160px;" %)HSW2\|(% style="width:282px" %)Beep volume (Only valid in HMI V1.0 System)\|(% style="width:452px" %)Volume range: 0~~80
	158	\|=(% style="width: 160px;" %)HSW3\|(% style="width:282px" %)Beep time\|(% style="width:452px" %)Unit: ms
	159	\|=(% style="width: 160px;" %)HSW4\|(% style="width:282px" %)Beep whether enable or not\|(% style="width:452px" %)(((
	160	* =0: Enable.
	161	* =1: Disable.
	162	)))
	163	\|=(% style="width: 160px;" %)HSW5\|(% style="width:282px" %)(((
	164	Alarm indicator
	165	)))\|(% style="width:452px" %)(((
	166	* =0: Currently no alarm or all alarms have been off.
	167	* =1: Currently alarm(s) still keep in on.
	168	)))
	169	\|=(% style="width: 160px;" %)HSW6~~HSW7\|(% style="width:282px" %)Number of alarms\|(% style="width:452px" %)The number of alarm (it also includes the records of alarm confirmed)
	170	\|=(% style="width: 160px;" %)HSW8\|(% style="width:282px" %)Number of unconfirmed history alarm\|(% style="width:452px" %)The number of unconfirmed history alarm
	171	\|=(% style="width: 160px;" %)HSW9\|(% style="width:282px" %)Time out prompt\|(% style="width:452px" %)(((
	172	* =0: Enable
	173	* =1: Disable
	174	)))
	175	\|=(% style="width: 160px;" %)HSW12\|(% style="width:282px" %)Screen swicth\|(% style="width:452px" %)(((
	176	* = 0: Only HSW control the screen switch, and the sreens of all users will switch.
	177	* = 1: Only HUW control the screen switch, and all users do not affect each other.
	178	)))
	179	\|=(% style="width: 160px;" %)HSW13\|(% style="width:282px" %)Screen switch register\|(% style="width:452px" %)Equal to different values, the screen jumps to the corresponding screen number of the screen.
	180	\|=(% style="width: 160px;" %)HSW24\|(% style="width:282px" %)Reboot HMI\|=(% style="width: 452px;" %)1: Reboot
	181	\|=(% style="width: 160px;" %)HSW28\|(% style="width:282px" %)Local time: year\|(% style="width:452px" %)Range: 0~~9999 (system reserved)
	182	\|=(% style="width: 160px;" %)HSW29\|(% style="width:282px" %)Local time: month\|(% style="width:452px" %)Range: 01~~12 (system reserved)
	183	\|=(% style="width: 160px;" %)HSW30\|(% style="width:282px" %)Local time: day\|(% style="width:452px" %)Range: 01~~31 (system reserved)
	184	\|=(% style="width: 160px;" %)HSW31\|(% style="width:282px" %)Local time: hour\|(% style="width:452px" %)Range: 0~~23 (system reserved)
	185	\|=(% style="width: 160px;" %)HSW32\|(% style="width:282px" %)Local time: minute\|(% style="width:452px" %)Range: 0~~59 (system reserved)
	186	\|=(% style="width: 160px;" %)HSW33\|(% style="width:282px" %)Local time: second\|(% style="width:452px" %)Range: 0~~59 (system reserved)
	187	\|=(% style="width: 160px;" %)HSW34\|(% style="width:282px" %)Local time: week\|(% style="width:452px" %)(((
	188	* =0: Sunday.
	189	* =1: Monday.
	190	* =2: Tuesday.
	191	* =3: Wednesday.
	192	* =4: Thursday.
	193	* =5: Friday.
	194	* =6: Saturday.
	195	)))
	196	\|=(% style="width: 160px;" %)HSW39\|(% style="width:282px" %)Beep type(Only valid in HMI V2.0 System)\|(% style="width:452px" %)Type range: 1-5, Default is 1.
	197	\|=(% style="width: 160px;" %)HSW134\|(% style="width:282px" %)(((
	198	Whether the Script is read through
	199
	200
	201	)))\|(% style="width:452px" %)(((
	202	(% class="box infomessage" %)
	203	(((
	204	✎Note: If want to read-only or write-only, please enable this settings.
	205	)))
	206
	207	* =0: Read from HMI cache(Default)
	208	* =1: Read from PLC directly
	209	)))
	210	\|=(% style="width: 160px;" %)HSW135\|(% style="width:282px" %)Confirm installment password\|(% style="width:452px" %)Confirm button for installment password
	211	\|=(% style="width: 160px;" %)HSW151\|(% style="width:282px" %)Installment due\|(% style="width:452px" %)Number of days to installment due
	212	\|=(% style="width: 160px;" %)HSW185~~200\|(% style="width:282px" %)Installment password\|(% style="width:452px" %)Enter installment password
	213	\|=(% style="width: 160px;" %)HSW242\|(% style="width:282px" %)(((
	214	Prompt result of recipe operation
	215
	216	* Upload: Data is written from address to file
	217	* Download: Data is written from a file to an address
	218	)))\|(% style="width:452px" %)(((
	219	* =1: Download recipe, start
	220	* =2: Download recipe, execution error
	221	* =3: Download recipe, files don't exist
	222	* =4: Download recipe, members don't exist
	223	* =5: Download recipe, groups don't exist
	224	* =6: Download recipe, success
	225	* =7: Upload recipe, start
	226	* =8: Upload recipe, execution error
	227	* =9: Upload recipe, files don't exist
	228	* =10: Upload recipe, members don't exist
	229	* =11: Upload recipe, groups don't exist
	230	* =12: Upload recipe, success
	231	* =13: Insert recipe, start
	232	* =14: Insert recipe, execution error
	233	* =15: Insert recipe, files don't exist
	234	* =16: Insert recipe, members don't exist
	235	* =17: Insert recipe, groups don't exist
	236	* =18: Insert recipe, success
	237	* =19: Delete recipe, start
	238	* =20: Delete recipe, execution error
	239	* =21: Delete recipe, files don't exist
	240	* =22: Delete recipe, members don't exist
	241	* =23: Delete recipe, groups don't exist
	242	* =24: Delete recipe, success
	243	* =25: Delete and sort recipe, start
	244	* =26: Delete recipe and sort, execution error
	245	* =27: Delete recipe and sort, files don't exist
	246	* =28: Delete recipe and sort, members don't exist
	247	* =29: Delete recipe and sort, groups don't exist
	248	* =30: Delete recipe and sort, success
	249	* =37: CSV recipe files import successfully
	250	* =38: CSV recipe files import failed.
	251	)))
	252	\|=(% style="width: 160px;" %)HSW243\|(% style="width:282px" %)Prompt result of recipe index\|(% style="width:452px" %)(((
	253	* =31: Recipe index, start
	254	* =32: Recipe index, execution error
	255	* =33: Recipe index, files don't exist
	256	* =34: Recipe index, members don't exist
	257	* =35: Recipe index, groups don't exist
	258	* =36: Recipe index, success
	259	)))
	260	\|=(% style="width: 160px;" %)HSW521\|(% style="width:282px" %)Delete graph and alarm record\|(% style="width:452px" %)(((
	261	* =0: No operation
	262	* =1: HSX521.0=1, delete all records.
	263	* =2: HSX521.1=1, delete all trend graph.
	264	* =4: HSX521.2=1, delete all alarms.
	265	* =16: HSX521.4=1, delete history XY plot.
	266	* =32: HSX521.5=1, delete data records in SD card or USB flash disk;(Please make a setting which is saved to USB flash disk or SD card in project setting).
	267	* =64: HSX521.6=1, delete alarms records in SD card or USB flash disk; (Please make a setting which is saved to USB flash disk or SD card in project setting).
	268	)))
	269	\|=(% style="width: 160px;" %)HSW522\|(% style="width:282px" %)Copy and paste the alarm/data files in flash to the USB flash disk\|(% style="width:452px" %)(((
	270	* =0: No operation
	271	* =1: HSX522.0=1, copy all record
	272	* =2: HSX522.2=1, copy history XY trend graph
	273	* =8: HSX522.3=1, copy alarm record
	274	* =32: HSX522.5=1, copy recipe
	275	)))
	276	\|=(% style="width: 160px;" %)HSW523\|(% style="width:282px" %)Copy and paste the alarm/data files in flash to the SD card\|(% style="width:452px" %)(((
	277	* =0: No operation
	278	* =1: HSX523.0=1, copy all record
	279	* =4: HSX523.2=1, copy history XY trend graph
	280	* =8: HSX523.3=1, copy alarm record
	281	)))
	282	\|=(% style="width: 160px;" %)HSW524\|(% style="width:282px" %)Copy and paste the alarm/data files in SD card to the USB flash disk\|(% style="width:452px" %)(((
	283	* =0: no operation
	284	* =4: HSX524.2=1, copy history XY trend graph
	285	* =8: HSX524.3=1, copy alarm record
	286	* =16: HSX524.4=1, copy history alarm record
	287	* =32: HSX524.5=1, copy data record
	288	)))
	289	\|=(% style="width: 160px;" %)HSW525\|(% style="width:282px" %)Copy and paste the alarm/data files in USB flash disk to SD card\|(% style="width:452px" %)(((
	290	* =0: no operation
	291	* =4: HSX525.2=1, copy history XY trend graph
	292	* =8: HSX525.3=1, copy alarm record
	293	* =16: HSX525.4=1, copy history alarm record
	294	* =32: HSX525.5= 1, copy data record
	295	)))
	296	\|=(% style="width: 160px;" %)HSW526\|(% style="width:282px" %)Delete file list\|(% style="width:452px" %)(((
	297	* =0: no operation
	298	* =1: HSX526.0=1, delete designated file
	299	* =2: HSX526.1=1, delete all files
	300	)))
	301	\|=(% style="width: 160px;" %)HSW527\|(% style="width:282px" %)Eject USB flash disk/SD card\|(% style="width:452px" %)(((
	302	* =0: No operation
	303	* =1: Eject USB flash disk
	304	* =2: Eject SD card
	305	)))
	306	\|=(% style="width: 160px;" %)HSW528\|(% style="width:282px" %)The state of USB flash disk\|(% style="width:452px" %)(((
	307	* =1: USB flash disk is detected
	308	* =2: Ejecting USB flash disk, please waiting…
	309	* =3: USB flash disk ejected
	310	)))
	311	\|=(% style="width: 160px;" %)HSW529\|(% style="width:282px" %)The state of SD card\|(% style="width:452px" %)(((
	312	* =1: SD card is detected
	313	* =2: Ejecting SD card, please waiting…
	314	* =3: SD card ejected
	315	)))
	316	\|=(% style="width: 160px;" %)HSW550~~849\|(% style="width:282px" %)Communication control\|(% style="width:452px" %)For communication control and communication lamp (please refer to "[[Communication control>>https://docs.we-con.com.cn/bin/view/PIStudio/13.HMI%20internal%20registers/#HCommunicationcontrol]]" sector for detailed)
	317	\|=(% style="width: 160px;" %)HSW850\|(% style="width:282px" %)(((
	318	Network state
	319
	320	(4G, WIFI and Ethernet)
	321	)))\|(% style="width:452px" %)(((
	322	In HMI V1.0
	323
	324	* =0: Network is disconnected.
	325	* =1: only LAN connected, and APP can't access HMI.
	326	* =2: WECON Cloud connected , APP and web could access HMI.
	327
	328	In HMI V2.0
	329
	330	* =0: Network is disconnected.
	331	* =1: Network is connected.
	332	)))
	333	\|=(% style="width: 160px;" %)HSW855\|(% style="width:282px" %)Backlight Control\|(% style="width:452px" %)(((
	334	* HSX855.0=1: turn on the backlight and reset automatically after being triggered.
	335	* HSX855.1=1: turn off the backlight and reset automatically after being triggered.
	336	)))
	337	\|=(% style="width: 160px;" %)HSW856\|(% style="width:282px" %)Whether to close the indirect screen when the current screen is switched to the other screen)\|(% style="width:452px" %)(((
	338	* =0: close the sub-screen, including the indirect screen;
	339	* =1: not to close.
	340	)))
	341	\|=(% style="width: 160px;" %)HSW857\|(% style="width:282px" %)Permission in remote access (web page, mobile APP, cloud platform, etc.)\|(% style="width:452px" %)(((
	342	* =0: users could switch the screen, control the switch and update data in remote access.
	343	* =1: users could only control function switch (only switch the screen), view data and switch state, but could not operate or update them.
	344	* =2: users could neither operate the screen switch, nor switch operation and data modification, only view. (The ig series and 8000/9000 series with -R after system upgrade)
	345	)))
	346	\|=(% style="width: 160px;" %)HSW860~~861\|(% style="width:282px" %)Data partition remaining space\|(% style="width:452px" %)Display the data partition remaining space, updated every minute, unit(kB)
	347	\|=(% style="width: 160px;" %)HSW880\|(% style="width:282px" %)Enable data partition remaining space\|(% style="width:452px" %)(((
	348	~=1, able to view the data partition remaining space from HSW860~~861.
	349
	350	~=Other value except 1, disable the viewing function.
	351	)))
	352	\|=(% style="width: 160px;" %)HSW881\|(% style="width:282px" %)Storage of Record files\|(% style="width:452px" %)(((
	353	It is used for controlling saving alarm/data record files to U disk / SD card.
	354
	355	* = 0: Save to storage.
	356	* = 1: Don't save to storage.
	357	)))
	358	\|=(% style="width: 160px;" %)HSW882\|(% style="width:282px" %)Storage device status\|(% style="width:452px" %)(((
	359	* HDX882.0=0 USB flash doesn't execute storage or storage finished.
	360	* HDX882.0=1 USB flash is reading data, don't remove USB flash.
	361	* HDX882.1=0 SD card doesn't execute storage or storage finished.
	362	* HDX882.1=1 SD card is reading data, don't remove SD card.
	363	)))
	364	\|=(% style="width: 160px;" %)HSW884\|(% style="width:282px" %)Enter the system network configuration interface\|(% style="width:452px" %)(((
	365	* = 0: Do not enter the network configuration interface
	366	* = 1: Enter the system network configuration interface.
	367	** ig series HMI only supports to enter the system interface
	368
	369	)))
	370	\|=(% style="width: 160px;" %)HSW885\|(% style="width:282px" %)When the control object hides the address is read failed (communication failure), set the display mode of the object\|(% style="width:452px" %)(((
	371	* = 0: displayed by object setting.
	372	* = 1: control address read failure, the address control of all objects is hidden, not displayed.
	373	* = 2: control address read failure, the address control of all objects is displayed, not hidden.
	374	)))
	375	\|=(% style="width: 160px;" %)HSW893\|(% style="width:282px" %)(((
	376	User Permission Control Address, same as HUW1000 feature, please refer to chapter "[[User Permission>>http://13.229.109.52:8080/wiki/pistudio/view/Helps/08.Basic%20Function/#HUserPermission]]"
	377
	378	✎Note: This address can only take effect when it is operated in the real HMI, and the operation is invalid on Web/App side.
	379	)))\|(% style="width:452px" %)(((
	380	* =1: User Log in
	381	* =2: Change User password
	382	* =3: User Log out
	383	* =4: New user
	384	* =5: Delete user
	385	* =6: Add user rights
	386	* =8: Add Hide features
	387	* =9: Delete Profile
	388	* =10: Export Profile
	389	* =11: Import profile
	390	* =12: Export log file
	391	* =13: Delete log file
	392	)))
	393	\|=(% style="width: 160px;" %)HSW900\|(% style="width:282px" %)Quick update frequency settings for objects\|(% style="width:452px" %)(((
	394	Valid when the object is enabled for "quick update". Default: 5.
	395
	396	Range: 1 (fastest) - 50 (slowest)
	397	)))
	398	\|=(% style="width: 160px;" %)HSW920\|(% style="width:282px" %)Static mode Maximum periods\|(% style="width:452px" %)Numeric Input/ Display (range: 0-12)
	399	\|=(% style="width: 160px;" %)HSW921 ~~ 924\|(% style="width:282px" %)Static mode Admin key\|(% style="width:452px" %)Character Input/ Display (length: 8)
	400	\|=(% style="width: 160px;" %)HSW925 ~~ 928\|(% style="width:282px" %)1^^st^^ period key (Static mode)\|(% style="width:452px" %)Character Input/ Display (length: 8)
	401	\|=(% style="width: 160px;" %)HSW929 ~~ 933\|(% style="width:282px" %)1^^st^^ expiry time (Static mode)\|(% style="width:452px" %)Numeric Input/ Display (YYYYMMDDHHMM)
	402	\|=(% style="width: 160px;" %)HSW935 ~~ 938\|(% style="width:282px" %)2^^nd^^ period key (Static mode)\|(% style="width:452px" %)Character Input/ Display (length: 8)
	403	\|=(% style="width: 160px;" %)HSW939 ~~ 943\|(% style="width:282px" %)2^^nd ^^expiry time (Static mode)\|(% style="width:452px" %)Numeric Input/ Display (YYYYMMDDHHMM)
	404	\|=(% style="width: 160px;" %)HSW945 ~~ 948\|(% style="width:282px" %)3^^rd^^ period key (Static mode)\|(% style="width:452px" %)Character Input/ Display (length: 8)
	405	\|=(% style="width: 160px;" %)HSW949 ~~ 953\|(% style="width:282px" %)3^^rd ^^expiry time (Static mode)\|(% style="width:452px" %)Numeric Input/ Display (YYYYMMDDHHMM)
	406	\|=(% style="width: 160px;" %)HSW955 ~~ 958\|(% style="width:282px" %)4^^th^^ period key (Static mode)\|(% style="width:452px" %)Character Input/ Display (length: 8)
	407	\|=(% style="width: 160px;" %)HSW959 ~~ 963\|(% style="width:282px" %)4^^th ^^expiry time (Static mode)\|(% style="width:452px" %)Numeric Input/ Display (YYYYMMDDHHMM)
	408	\|=(% style="width: 160px;" %)HSW965 ~~ 968\|(% style="width:282px" %)5^^th^^ period key (Static mode)\|(% style="width:452px" %)Character Input/ Display (length: 8)
	409	\|=(% style="width: 160px;" %)HSW969 ~~ 973\|(% style="width:282px" %)5^^th ^^expiry time (Static mode)\|(% style="width:452px" %)Numeric Input/ Display (YYYYMMDDHHMM)
	410	\|=(% style="width: 160px;" %)HSW975 ~~ 978\|(% style="width:282px" %)6^^th^^ period key (Static mode)\|(% style="width:452px" %)Character Input/ Display (length: 8)
	411	\|=(% style="width: 160px;" %)HSW979 ~~ 983\|(% style="width:282px" %)6^^th ^^expiry time (Static mode)\|(% style="width:452px" %)Numeric Input/ Display (YYYYMMDDHHMM)
	412	\|=(% style="width: 160px;" %)HSW985 ~~ 988\|(% style="width:282px" %)7^^th^^ period key (Static mode)\|(% style="width:452px" %)Character Input/ Display (length: 8)
	413	\|=(% style="width: 160px;" %)HSW989 ~~ 993\|(% style="width:282px" %)7^^th ^^expiry time (Static mode)\|(% style="width:452px" %)Numeric Input/ Display (YYYYMMDDHHMM)
	414	\|=(% style="width: 160px;" %)HSW995 ~~ 998\|(% style="width:282px" %)8^^th^^ period key (Static mode)\|(% style="width:452px" %)Character Input/ Display (length: 8)
	415	\|=(% style="width: 160px;" %)HSW999 ~~ 1003\|(% style="width:282px" %)8^^th ^^expiry time (Static mode)\|(% style="width:452px" %)Numeric Input/ Display (YYYYMMDDHHMM)
	416	\|=(% style="width: 160px;" %)HSW1005 ~~1008\|(% style="width:282px" %)9^^th^^ period key (Static mode)\|(% style="width:452px" %)Character Input/ Display (length: 8)
	417	\|=(% style="width: 160px;" %)HSW1009 ~~ 1013\|(% style="width:282px" %)9^^th ^^expiry time (Static mode)\|(% style="width:452px" %)Numeric Input/ Display (YYYYMMDDHHMM)
	418	\|=(% style="width: 160px;" %)HSW1015 ~~1018\|(% style="width:282px" %)10^^th^^ period key (Static mode)\|(% style="width:452px" %)Character Input/ Display (length: 8)
	419	\|=(% style="width: 160px;" %)HSW1019 ~~ 1023\|(% style="width:282px" %)10^^th ^^expiry time (Static mode)\|(% style="width:452px" %)Numeric Input/ Display (YYYYMMDDHHMM)
	420	\|=(% style="width: 160px;" %)HSW1025 ~~1028\|(% style="width:282px" %)11^^th^^ period key (Static mode)\|(% style="width:452px" %)Character Input/ Display (length: 8)
	421	\|=(% style="width: 160px;" %)HSW1029 ~~ 1033\|(% style="width:282px" %)11^^th ^^expiry time (Static mode)\|(% style="width:452px" %)Numeric Input/ Display (YYYYMMDDHHMM)
	422	\|=(% style="width: 160px;" %)HSW1035 ~~1038\|(% style="width:282px" %)12^^th^^ period key (Static mode)\|(% style="width:452px" %)Character Input/ Display (length: 8)
	423	\|=(% style="width: 160px;" %)HSW1039 ~~ 1043\|(% style="width:282px" %)12^^th ^^expiry time (Static mode)\|(% style="width:452px" %)Numeric Input/ Display (YYYYMMDDHHMM)
	424	\|=(% style="width: 160px;" %)HSW1046\|(% style="width:282px" %)Current period (Static mode)\|(% style="width:452px" %)Current period (Range 1-13)
	425	\|=(% style="width: 160px;" %)HSW1047\|(% style="width:282px" %)Save settings (Static mode)\|(% style="width:452px" %)(((
	426	* HSX1047.0=1: Save static installment information
	427	* HSX1047.1=1: Write installment information to registers
	428	)))
	429	\|=(% style="width: 160px;" %)HSW1050~~HSW1065\|(% style="width:282px" %)The recipe name that can input csv format\|(% style="width:452px" %)Input CSV format recipe file name through "Character Input/ Display".(This function should be used in combination with the recipefunction)
	430	\|=(% style="width: 160px;" %)HSW1066\|(% style="width:282px" %)Configure the type of the CSV file imported\|(% style="width:452px" %)(((
	431	The CSV file type imported (This function should be used in combination with the recipe function)
	432
	433	* =0: Import customed CSV file. The data in the file is valid.
	434	* =1: Import ordinary recipe files of regular series HMI. The 1st row of the file is invalid.
	435	* =2: Import special recipe files of regular series HMI. The 1st and 3nd rows and the 1st colume of the file is invalid.
	436	)))
	437	\|=(% style="width: 160px;" %)HSW1067\|(% style="width:282px" %)Location where the CSV file is saved\|(% style="width:452px" %)(((
	438	Set the path of CSV file (This function should be used in combination with the recipe function)
	439
	440	* =0: In the CsvFile directory of the USB stick
	441	* =1: In the CsvFile directory of the SD card
	442	)))
	443	\|=(% style="width: 160px;" %)HSW1070\|(% style="width:282px" %)The time interval (seconds) since the last time the screen was clicked\|(% style="width:452px" %)(((
	444	Shows how long the current screen has not been clicked, using a decimal unsigned double word (Numeric Input/ Display).
	445
	446	(% class="box infomessage" %)
	447	(((
	448	✎Note: This register is cleared to zero regardless of which user clicks on the screen.
	449	)))
	450	)))
	451	\|=(% style="width: 160px;" %)HSW1073\|(% style="width:282px" %)Corresponding key value from keyboard\|(% style="width:452px" %)Display the key value of the currently pressed key, the key value is shown in Table 1 (not updated when the character input display is being input)
	452	\|=(% style="width: 160px;" %)HSW1074\|(% style="width:282px" %)Keyboard key status\|(% style="width:452px" %)Display the current button status (not updated when the numeric input display is being input)(((
	453	* =0: key release
	454	* =1: key press
	455	* =2: Long press the button
	456	)))
	457	\|=(% style="width: 160px;" %)HSW1075\|(% style="width:282px" %)Cursor speed\|(% style="width:452px" %)Control the cursor movement speed, the range is 0～100, the default is 20
	458	\|=(% style="width: 160px;" %)HSW1076\|(% style="width:282px" %)Cursor x coordinate value\|(% style="width:452px" %)Record the x value at the current position of the cursor, range: 0 to screen width -1
	459	\|=(% style="width: 160px;" %)HSW1077\|(% style="width:282px" %)Cursor y coordinate value\|(% style="width:452px" %)Record the y value at the current position of the cursor, range: 0 to screen height-1
	460	\|=(% style="width: 160px;" %)HSW1078\|(% style="width:282px" %)Corresponding ASCII code for keyboard keys\|(% style="width:452px" %)Only the ASCII value of letters, numbers, and symbols are displayed, and the ASCII value of the function button is not displayed.
	461	\|=(% style="width: 160px;" %)HSW1079\|(% style="width:282px" %)Trigger to set the cursor position and set the Enter key mode\|(% style="width:452px" %)(((
	462	* HSX1079.0=1: Set the cursor position according to the cursor xy register value;
	463	* HSX1079.1=0: When the numeric/character input display is being input, press Enter to end the input, no value/text part is being input, Enter is a normal click;
	464	* HSX1079.1=1 Regardless of whether the numeric/character component is inputting the Enter key, only normal click is performed, and the keyboard end input is not performed.
	465	)))
	466	\|=(% style="width: 160px;" %)HSW1083\|(% style="width:282px" %)Naming method for printing object screenshots\|(% style="width:452px" %)(((
	467	Example: The time is 2019-01-04 14:29:10 (523 milliseconds), the screen number is 0, and the object ID is 2.
	468
	469	* =0: Use year, month, day, hour, minute, second, millisecond, screen number, part number to name, such as: 2019010414291052302.bmp.
	470	* =1: Name using year, month, day, hour, minute, and second.
	471
	472	For example: 20190104142910.bmp.
	473	)))
	474	\|=(% style="width: 160px;" %)HSW1086\|(% style="width:282px" %)Control address mapping polling cycle, unit: ms\|(% style="width:452px" %)(((
	475	Address mapping polling cycle, effective range: 40~~1000ms, default: 300ms.
	476
	477	* When the set value is greater than 1000, the value is 1000.
	478	* When the set value is lower than 40, it changes to the default value 300
	479	)))
	480	\|=(% style="width: 160px;" %)HSW1087\|(% style="width:282px" %)Control write interval in address mapping\|(% style="width:452px" %)(((
	481	After reading data to the device for N times, Perform an address mapping write operation. N is the interval value. The effective range: 0~~5, and default is 2.
	482
	483	When N more than 5, it is 5.
	484
	485	0 is the fastest and 5 is the slowest.
	486	)))
	487	\|=(% style="width: 160px;" %)HSW1088\|(% style="width:282px" %)Control the write interval of script\|(% style="width:452px" %)(((
	488	After reading data to the device for N times, Perform a script write operation. N is the interval value. The effective range: 0~~5, and default is 2.
	489
	490	When N more than 5, it is 5.
	491
	492	0 is the fastest and 5 is the slowest.
	493	)))
	494	\|=(% style="width: 160px;" %)HSW1089\|(% style="width:282px" %)Control interval of read through\|(% style="width:452px" %)(((
	495	After reading data to the device for N times, Perform a read through operation. N is the interval value. The effective range: 0~~5, and default is 2.
	496
	497	When N more than 5, it is 5.
	498
	499	0 is the fastest and 5 is the slowest.
	500	)))
	501	\|=(% style="width: 160px;" %)HSW1100\|(% colspan="1" rowspan="4" style="width:282px" %)Set the Master IP for Multi-link\|(% style="width:452px" %)High word 1 for Master IP address of multi-link
	502	\|=(% style="width: 160px;" %)HSW1101\|(% style="width:452px" %)High word 2 for Master IP address of multi-link
	503	\|=(% style="width: 160px;" %)HSW1102\|(% style="width:452px" %)High word 3 for Master IP address of multi-link
	504	\|=(% style="width: 160px;" %)HSW1103\|(% style="width:452px" %)High word 4 for Master IP address of multi-link
	505	\|=(% style="width: 160px;" %)HSW1104\|(% style="width:282px" %)Control connection to Master or not for Multi-link slave device\|(% style="width:452px" %)(((
	506	* =1: Connect to the Master
	507	* =0: Do not connect to Master
	508	)))
	509	\|=(% style="width: 160px;" %)HSW1141\|(% style="width:282px" %)Release alarm\|(% style="width:452px" %)(((
	510	* =0, Default value
	511	* =1, Release the alarm generated before the last power-down when starting up
	512	)))
	513	\|=(% style="width: 160px;" %)HSW1200\|(% colspan="1" rowspan="2" style="width:282px" %)TSAP settings for HMI in the Siemens LOGO! 8 protocol(ig series or HMI V2.0)\|(% style="width:452px" %)HMI local TSAP, which corresponds to the remote TSAP of PLC
	514	\|=(% style="width: 160px;" %)HSW1201\|(% style="width:452px" %)HMI remote TSAP, which corresponds to the local TSAP of PLC
	515	\|=(% style="width: 160px;" %)HSW1450\|(% style="width:282px" %)Enable objects level password function\|(% style="width:452px" %)(((
	516	* =0, Disable
	517	* =1, Enable
	518	)))
	519	\|=(% style="width: 160px;" %)HSW1451\|(% style="width:282px" %)Whether the object level passwords are independent of each other\|(% style="width:452px" %)(((
	520	* =0, No, high-level passwords can unlock low-level
	521	* = 1, Yes, high-level passwords cannot unlock low-level
	522	)))
	523	\|=(% style="width: 160px;" %)HSW1452\|(% style="width:282px" %)Initialization level\|(% style="width:452px" %)Initialization level while HMI running
	524	\|=(% style="width: 160px;" %)HSW1454~~1457\|(% style="width:282px" %)Password for Level 1\|(% style="width:452px" %)(((
	525	Display password for level 1, using character input object, up to 8 characters (numbers, letters (case sensitive))
	526	)))
	527	\|=(% style="width: 160px;" %)HSW1458~~1461\|(% style="width:282px" %)Password for Level 2\|(% style="width:452px" %)Display password for level 2, using character input object, up to 8 characters (numbers, letters (case sensitive))
	528	\|=(% style="width: 160px;" %)HSW1462~~1465\|(% style="width:282px" %)Password for Level 3\|(% style="width:452px" %)Display password for level 3, using character input object, up to 8 characters (numbers, letters (case sensitive))
	529	\|=(% style="width: 160px;" %)HSW1466~~1469\|(% style="width:282px" %)Password for Level 4\|(% style="width:452px" %)Display password for level 4, using character input object, up to 8 characters (numbers, letters (case sensitive))
	530	\|=(% style="width: 160px;" %)HSW1470~~1473\|(% style="width:282px" %)Password for Level 5\|(% style="width:452px" %)Display password for level 5, using character input object, up to 8 characters (numbers, letters (case sensitive))
	531	\|=(% style="width: 160px;" %)HSW1474~~1477\|(% style="width:282px" %)Password for Level 6\|(% style="width:452px" %)Display password for level 6, using character input object, up to 8 characters (numbers, letters (case sensitive))
	532	\|=(% style="width: 160px;" %)HSW1478~~1481\|(% style="width:282px" %)Password for Level 7\|(% style="width:452px" %)Display password for level 7, using character input object, up to 8 characters (numbers, letters (case sensitive))
	533	\|=(% style="width: 160px;" %)HSW1482~~1485\|(% style="width:282px" %)Password for Level 8\|(% style="width:452px" %)Display password for level 8, using character input object, up to 8 characters (numbers, letters (case sensitive))
	534	\|=(% style="width: 160px;" %)HSW1486~~1489\|(% style="width:282px" %)Password for Level 9\|(% style="width:452px" %)Display password for level 9, using character input object, up to 8 characters (numbers, letters (case sensitive))
	535	\|=(% style="width: 160px;" %)HSW1490~~1493\|(% style="width:282px" %)Password for Level 10\|(% style="width:452px" %)Display password for level 10, using character input object, up to 8 characters (numbers, letters (case sensitive))
	536	\|=(% style="width: 160px;" %)HSW1494~~1497\|(% style="width:282px" %)Password for Level 11\|(% style="width:452px" %)Display password for level 11, using character input object, up to 8 characters (numbers, letters (case sensitive))
	537	\|=(% style="width: 160px;" %)HSW1498~~1501\|(% style="width:282px" %)Password for Level 12\|(% style="width:452px" %)Display password for level 12, using character input object, up to 8 characters (numbers, letters (case sensitive))
	538	\|=(% style="width: 160px;" %)HSW1502\|(% style="width:282px" %)Modify password for object level\|(% style="width:452px" %)(((
	539	* HSX1502.0=1: Modification comfirmed. Save the data of HSW1450~~HSW1501 to a file for immediate effect.
	540	* HSX1502.1=1:Modification cancelled. Restore the current data of hSW1450-HSW1501 to the data saved in the file last time.
	541	)))
	542	\|=(% style="width: 160px;" %)HSW1509\|(% style="width:282px" %)Curve width\|(% style="width:452px" %)(((
	543	* =0: Use the curve width set by project default.
	544	* =1 to 10: use special register to set curve width.
	545	)))
	546	\|=(% style="width: 160px;" %)HSW1603\|(% style="width:282px" %)Number of current unreleased alarms\|(% style="width:452px" %)The number of current unreleased alarms in alarm record file.
	547	\|=(% style="width: 160px;" %)HSW1604\|(% style="width:282px" %)The auxiliary judgment address when the control bit in the Object Lock fails to be read\|(% style="width:452px" %)(((
	548	* =0: The auxiliary address is invalid.
	549	* =1: When the communication fails, lock the object.
	550	* =2: When the communication fails, unlock the object.
	551	* =Others: The auxiliary address is invalid.
	552	)))
	553	\|=(% style="width: 160px;" %)HSW1605\|(% style="width:282px" %)BCD format natural decimal control\|(% style="width:452px" %)(((
	554	Whether to display natural decimals with decimal point in BCD format:
	555
	556	* 0=Not enabled.
	557	* 1=Enable.
	558
	559	(For example, 56.20 is displayed as 56.2, 33.00 is displayed as 33)
	560	)))
	561	\|=(% style="width: 160px;" %)HSW1606\|(% style="width:282px" %)User permission modification control\|(% style="width:452px" %)(((
	562	* =0: Ordinary users are allowed to modify permissions and other operations
	563	* =1: Only the administrator can operate (default is 0)
	564	)))
	565	\|=(% style="width: 160px;" %)HSW1607\|(% style="width:282px" %)The spacing value among the drop-down items of the drop-down list\|(% style="width:452px" %)10 to 50 is effective, such as: 23 is 2.3 times the height of the object.
	566	\|=(% style="width: 160px;" %)HSW1611\|(% style="width:282px" %)(((
	567	Traditional recipe transfer
	568	)))\|(% style="width:452px" %)(((
	569	* =1: download traditional recipe.
	570	* =2: upload the traditional recipe.
	571	)))
	572	\|=(% style="width: 160px;" %)HSW1612\|(% style="width:282px" %)Traditional Recipe group number\|(% style="width:452px" %)Traditional Recipe group number
	573	\|=(% style="width: 160px;" %)HSW1613\|(% style="width:282px" %)Display the status of network card\|(% style="width:452px" %)(((
	574	* =1: Normal
	575	* =Others: Abnormal
	576	)))
	577	\|=(% style="width: 160px;" %)HSW1614~~1623\|(% style="width:282px" %)Download speed per second\|(% style="width:452px" %)Display the download speed per second. (The value is string)
	578	\|=(% style="width: 160px;" %)HSW1624~~1633\|(% style="width:282px" %)Upnload speed per second\|(% style="width:452px" %)Display the upload speed per second. (The value is string)
	579	\|=(% style="width: 160px;" %)HSW1634~~1643\|(% style="width:282px" %)Flow consumption rate\|(% style="width:452px" %)Display the total flow rate per second (The value is string)
	580	\|=(% style="width: 160px;" %)HSW1644~~1653\|(% style="width:282px" %)Download flow consumption after power on\|(% style="width:452px" %)Display the download flow consumption after power on (The value is string)
	581	\|=(% style="width: 160px;" %)HSW1654~~1663\|(% style="width:282px" %)Upload flow consumption after power on\|(% style="width:452px" %)Display the upload flow consumption after power on (The value is string)
	582	\|=(% style="width: 160px;" %)HSW1664~~1673\|(% style="width:282px" %)Total flow consumption after power on\|(% style="width:452px" %)Display the total flow consumption after power on (download and upload). (The value is string)
	583	\|=(% style="width: 160px;" %)HSW1674~~1683\|(% style="width:282px" %)Historical flow consumption\|(% style="width:452px" %)Display historical flow consumption (download and upload). (The value is string)
	584	\|=(% style="width: 160px;" %)HSW1684~~1693\|(% style="width:282px" %)Flow consumption in 10 minutes\|(% style="width:452px" %)Flow consumption in 10 minutes (download and upload). (The value is string)
	585	\|=(% style="width: 160px;" %)HSW1694~~1703\|(% style="width:282px" %)Flow consumption in 30 minutes\|(% style="width:452px" %)Flow consumption in 30 minutes (download and upload). (The value is string)
	586	\|=(% style="width: 160px;" %)HSW1704~~1713\|(% style="width:282px" %)Flow consumption in 3 hours\|(% style="width:452px" %)Flow consumption in 3 hours (download and upload). (The value is string)
	587	\|=(% style="width: 160px;" %)HSW1715\|(% style="width:282px" %)Reset flow\|(% style="width:452px" %)(((
	588	* =1: Clear historical flow data and restart the count.
	589	* =Others: Invalid
	590	)))
	591	\|=(% style="width: 160px;" %)HSW1719\|(% style="width:282px" %)Network status of Ethernet connnecting to server\|(% style="width:452px" %)(((
	592	* =0: Server connection exception
	593	* =1: Server connection is OK
	594	)))
	595	\|=(% style="width: 160px;" %)HSW1720\|(% colspan="1" rowspan="12" style="width:282px" %)Related IP register in WIFI network status (It is valid when HMI is connected to WIFI)\|(% style="width:452px" %)Local IP address high byte 1
	596	\|=(% style="width: 160px;" %)HSW1721\|(% style="width:452px" %)Local IP address high byte 2
	597	\|=(% style="width: 160px;" %)HSW1722\|(% style="width:452px" %)Local IP address high byte 3
	598	\|=(% style="width: 160px;" %)HSW1723\|(% style="width:452px" %)Local IP address high byte 4
	599	\|=(% style="width: 160px;" %)HSW1724\|(% style="width:452px" %)Local mask IP address high byte 1
	600	\|=(% style="width: 160px;" %)HSW1725\|(% style="width:452px" %)Local mask IP address high byte 2
	601	\|=(% style="width: 160px;" %)HSW1726\|(% style="width:452px" %)Local mask IP address high byte 3
	602	\|=(% style="width: 160px;" %)HSW1727\|(% style="width:452px" %)Local mask IP address high byte 4
	603	\|=(% style="width: 160px;" %)HSW1728\|(% style="width:452px" %)Local gateway IP address high byte 1
	604	\|=(% style="width: 160px;" %)HSW1729\|(% style="width:452px" %)Local gateway IP address high byte 2
	605	\|=(% style="width: 160px;" %)HSW1730\|(% style="width:452px" %)Local gateway IP address high byte 3
	606	\|=(% style="width: 160px;" %)HSW1731\|(% style="width:452px" %)Local gateway IP address high byte 4
	607	\|=(% style="width: 160px;" %)HSW1733\|(% colspan="1" rowspan="6" style="width:282px" %)(((
	608	Display the MAC code of current WIFI
	609
	610	(display in hexadecimal)
	611	)))\|(% style="width:452px" %)Local MAC address high byte 1 (hexadecimal)
	612	\|=(% style="width: 160px;" %)HSW1734\|(% style="width:452px" %)Local MAC address high byte 2 (hexadecimal)
	613	\|=(% style="width: 160px;" %)HSW1735\|(% style="width:452px" %)Local MAC address high byte 3 (hexadecimal)
	614	\|=(% style="width: 160px;" %)HSW1736\|(% style="width:452px" %)Local MAC address high byte 4 (hexadecimal)
	615	\|=(% style="width: 160px;" %)HSW1737\|(% style="width:452px" %)Local MAC address high byte 5 (hexadecimal)
	616	\|=(% style="width: 160px;" %)HSW1738\|(% style="width:452px" %)Local MAC address high byte 6 (hexadecimal)
	617	\|=(% style="width: 160px;" %)HSW1739\|(% style="width:282px" %)Display the network status of WIFI\|(% style="width:452px" %)(((
	618	* =0: Server connection exception
	619	* =1: Server connection is OK
	620	)))
	621	\|=(% style="width: 160px;" %)HSW1740\|(% style="width:282px" %)Wi-fi signal strength\|(% style="width:452px" %)(((
	622	Display the value of Wi-fi signal signal strength, ranges from 0~~100 (Signal strength is automatically obtained only once when HMI is powered on, and it will not be automatically updated. It needs to be used with the HSW1890)
	623	)))
	624	\|=(% style="width: 160px;" %)HSW1741\|(% colspan="1" rowspan="12" style="width:282px" %)Related IP register in 4Gnetwork status (It is valid when HMI is connected to 4G)\|(% style="width:452px" %)Local IP address high byte 1
	625	\|=(% style="width: 160px;" %)HSW1742\|(% style="width:452px" %)Local IP address high byte 2
	626	\|=(% style="width: 160px;" %)HSW1743\|(% style="width:452px" %)Local IP address high byte 3
	627	\|=(% style="width: 160px;" %)HSW1744\|(% style="width:452px" %)Local IP address high byte 4
	628	\|=(% style="width: 160px;" %)HSW1745\|(% style="width:452px" %)Local mask IP address high byte 1
	629	\|=(% style="width: 160px;" %)HSW1746\|(% style="width:452px" %)Local mask IP address high byte 2
	630	\|=(% style="width: 160px;" %)HSW1747\|(% style="width:452px" %)Local mask IP address high byte 3
	631	\|=(% style="width: 160px;" %)HSW1748\|(% style="width:452px" %)Local mask IP address high byte 4
	632	\|=(% style="width: 160px;" %)HSW1749\|(% style="width:452px" %)Local gateway IP address high byte 1
	633	\|=(% style="width: 160px;" %)HSW1750\|(% style="width:452px" %)Local gateway IP address high byte 2
	634	\|=(% style="width: 160px;" %)HSW1751\|(% style="width:452px" %)Local gateway IP address high byte 3
	635	\|=(% style="width: 160px;" %)HSW1752\|(% style="width:452px" %)Local gateway IP address high byte 4
	636	\|=(% style="width: 160px;" %)HSW1754\|(% colspan="1" rowspan="6" style="width:282px" %)(((
	637	Display the MAC code of current WIFI
	638
	639	(display in hexadecimal)
	640	)))\|(% style="width:452px" %)Local MAC address high byte 1 (hexadecimal)
	641	\|=(% style="width: 160px;" %)HSW1755\|(% style="width:452px" %)Local MAC address high byte 2 (hexadecimal)
	642	\|=(% style="width: 160px;" %)HSW1756\|(% style="width:452px" %)Local MAC address high byte 3 (hexadecimal)
	643	\|=(% style="width: 160px;" %)HSW1757\|(% style="width:452px" %)Local MAC address high byte 4 (hexadecimal)
	644	\|=(% style="width: 160px;" %)HSW1758\|(% style="width:452px" %)Local MAC address high byte 5 (hexadecimal)
	645	\|=(% style="width: 160px;" %)HSW1759\|(% style="width:452px" %)Local MAC address high byte 6 (hexadecimal)
	646	\|=(% style="width: 160px;" %)HSW1760\|(% style="width:282px" %)Display 4G network status\|(% style="width:452px" %)(((
	647	* =0: Server connection exception
	648	* =1: Server connection is OK
	649	)))
	650	\|=(% style="width: 160px;" %)HSW1761\|(% style="width:282px" %)Display 4G network signal strength\|(% style="width:452px" %)Signal strength: 0~~31. The greater the value ,the signal is stronger
	651	\|=(% style="width: 160px;" %)(((
	652	HSW1762
	653	)))\|(% colspan="1" rowspan="13" style="width:282px" %)(((
	654	Note: Valid when Ethernet2 of HMI is plugged into the network cable.
	655	①、When the Ethernet setting is enabled in the project parameters, this register displays the set value.
	656	②. When the Ethernet setting is not enabled in the engineering parameters, the register displays the Ethernet IP automatically acquired by the HMI.
	657	③. When the HMI is not plugged into the network cable, the register will show 0 whether the engineering parameters are set or not.
	658	④.IP related registers can be read and written (only static IP mode can be written).
	659	)))\|(% style="width:452px" %)(((
	660	Ethernet2 Local IP address high byte 1
	661	)))
	662	\|=(% style="width: 160px;" %)(((
	663	HSW1763
	664	)))\|(% style="width:452px" %)(((
	665	Ethernet2 Local IP address high byte 2
	666	)))
	667	\|=(% style="width: 160px;" %)(((
	668	HSW1764
	669	)))\|(% style="width:452px" %)(((
	670	Ethernet2 Local IP address high byte 3
	671	)))
	672	\|=(% style="width: 160px;" %)(((
	673	HSW1765
	674	)))\|(% style="width:452px" %)(((
	675	Ethernet2 Local IP address high byte 4
	676	)))
	677	\|=(% style="width: 160px;" %)(((
	678	HSW1766
	679	)))\|(% style="width:452px" %)(((
	680	Ethernet2 Local mask IP address high byte 1
	681	)))
	682	\|=(% style="width: 160px;" %)(((
	683	HSW1767
	684	)))\|(% style="width:452px" %)(((
	685	Ethernet2 Local mask IP address high byte 2
	686	)))
	687	\|=(% style="width: 160px;" %)(((
	688	HSW1768
	689	)))\|(% style="width:452px" %)Ethernet2 Local mask IP address high byte 3
	690	\|=(% style="width: 160px;" %)HSW1769\|(% style="width:452px" %)Ethernet2 Local mask IP address high byte 4
	691	\|=(% style="width: 160px;" %)(((
	692	HSW1770
	693	)))\|(% style="width:452px" %)(((
	694	Ethernet2 Local gateway IP address high byte 1
	695	)))
	696	\|=(% style="width: 160px;" %)(((
	697	HSW1771
	698	)))\|(% style="width:452px" %)(((
	699	Ethernet2 Local gateway IP address high byte 2
	700	)))
	701	\|=(% style="width: 160px;" %)(((
	702	HSW1772
	703	)))\|(% style="width:452px" %)(((
	704	Ethernet2 Local gateway IP address high byte 3
	705	)))
	706	\|=(% style="width: 160px;" %)(((
	707	HSW1773
	708	)))\|(% style="width:452px" %)(((
	709	Ethernet2 Local gateway IP address high byte 4
	710	)))
	711	\|=(% style="width: 160px;" %)(((
	712	HSW1774
	713	)))\|(% style="width:452px" %)(((
	714	Ethernet2 Local Port Address
	715	)))
	716	\|=(% style="width: 160px;" %)(((
	717	HSW1775
	718	)))\|(% colspan="1" rowspan="6" style="width:282px" %)(((
	719	①Display the MAC code of Ethernet2 NIC
	720
	721	(hexadecimal display)
	722
	723	②Read-only mode, not modifiable
	724	)))\|(% style="width:452px" %)(((
	725	Ethernet2 Local MAC code high byte 1
	726	)))
	727	\|=(% style="width: 160px;" %)(((
	728	HSW1776
	729	)))\|(% style="width:452px" %)(((
	730	Ethernet2 Local MAC code high byte 2
	731	)))
	732	\|=(% style="width: 160px;" %)(((
	733	HSW1777
	734	)))\|(% style="width:452px" %)(((
	735	Ethernet2 Local MAC code high byte 3
	736	)))
	737	\|=(% style="width: 160px;" %)(((
	738	HSW1778
	739	)))\|(% style="width:452px" %)(((
	740	Ethernet2 Local MAC code high byte 4
	741	)))
	742	\|=(% style="width: 160px;" %)(((
	743	HSW1779
	744	)))\|(% style="width:452px" %)(((
	745	Ethernet2 Local MAC code high byte 5
	746	)))
	747	\|=(% style="width: 160px;" %)(((
	748	HSW1780
	749	)))\|(% style="width:452px" %)(((
	750	Ethernet2 Local MAC code high byte 6
	751	)))
	752	\|=(% style="width: 160px;" %)(((
	753	HSW1781
	754	)))\|(% colspan="1" rowspan="8" style="width:282px" %)(((
	755	①Display and modify DNS1 and DNS2 of Ethernet2
	756
	757	②Related registers can be read and written mode (only static IP mode can be written)
	758	)))\|(% style="width:452px" %)(((
	759	Ethernet2 Local DNS1 address high byte 1
	760	)))
	761	\|=(% style="width: 160px;" %)(((
	762	HSW1782
	763	)))\|(% style="width:452px" %)(((
	764	Ethernet2 Local DNS1 address high byte 2
	765	)))
	766	\|=(% style="width: 160px;" %)(((
	767	HSW1783
	768	)))\|(% style="width:452px" %)(((
	769	Ethernet2 Local DNS1 address high byte 3
	770	)))
	771	\|=(% style="width: 160px;" %)(((
	772	HSW1784
	773	)))\|(% style="width:452px" %)(((
	774	Ethernet2 Local DNS1 address high byte 4
	775	)))
	776	\|=(% style="width: 160px;" %)(((
	777	HSW1785
	778	)))\|(% style="width:452px" %)(((
	779	Ethernet2 Local DNS2 address high byte 1
	780	)))
	781	\|=(% style="width: 160px;" %)(((
	782	HSW1786
	783	)))\|(% style="width:452px" %)(((
	784	Ethernet2 Local DNS2 address high byte 2
	785	)))
	786	\|=(% style="width: 160px;" %)(((
	787	HSW1787
	788	)))\|(% style="width:452px" %)(((
	789	Ethernet2 Local DNS2 address high byte 3
	790	)))
	791	\|=(% style="width: 160px;" %)(((
	792	HSW1788
	793	)))\|(% style="width:452px" %)(((
	794	Ethernet2 Local DNS2 address high byte 4
	795	)))
	796	\|=(% style="width: 160px;" %)(((
	797	HSW1789
	798	)))\|(% colspan="1" style="width:282px" %)(((
	799	Display or set the dynamic or static IP mode of Ethernet2
	800	)))\|(% style="width:452px" %)(((
	801	HSX1789.0 = 0, Static IP mode
	802
	803	HSX1789.0 = 1, dynamic IP mode
	804	)))
	805	\|=(% style="width: 160px;" %)(((
	806	HSW1790
	807	)))\|(% colspan="1" style="width:282px" %)(((
	808	Confirm Ethernet2 IP, subnet mask, gateway, DNS1, DNS2, and dynamic static IP settings
	809	)))\|(% style="width:452px" %)(((
	810	~= 1, confirm the setting (i.e., after modifying IP-related information, set this address to 1, representing confirmation of the modification, after which it will be reset to 0)
	811	)))
	812	\|=(% style="width: 160px;" %)(((
	813	HSW1791
	814	)))\|(% colspan="1" style="width:282px" %)(((
	815	Network status of the Ethernet2 connection server
	816	)))\|(% style="width:452px" %)(((
	817	~= 0, connection to the server is abnormal = 1, connection to the server is normal
	818	)))
	819	\|=(% style="width: 160px;" %)HSW1852\|(% style="width:282px" %)Control the interval in two consecutive clicks\|(% style="width:452px" %)Limit range: 1~~500ms. The default is 100 ms.
	820	\|=(% style="width: 160px;" %)HSW1853\|(% style="width:282px" %)File format for exporting data records to USB flash drive or SD card\|(% style="width:452px" %)(((
	821	* =0: db database
	822	* =1: CSV
	823
	824	(Only valid for script function DbToCsvFile)
	825	)))
	826	\|=(% style="width: 160px;" %)HSW1854\|(% style="width:282px" %)High and low word conversion type\|(% style="width:452px" %)(((
	827	* =0: use the old high-low word conversion (default)
	828	* =1: usie the new high-low word conversion
	829	)))
	830	\|=(% style="width: 160px;" %)HSW1855\|(% style="width:282px" %)Screen Lock prompt display control\|(% style="width:452px" %)(((
	831	Control whether the screen lock prompt is displayed,
	832
	833	* =0: display(default value)
	834	* =Other: no display.
	835	)))
	836	\|=(% style="width: 160px;" %)HSW1856\|(% style="width:282px" %)Display map fence drawing status\|(% style="width:452px" %)(((
	837	* =0: no map fence
	838	* =1: The map fence is drawn and the device is inside the fence
	839	* =2: The map fence is drawn and the device is outside the fence
	840	)))
	841	\|=(% style="width: 160px;" %)HSW1857\|(% style="width:282px" %)USB disk download \|(% style="width:452px" %)(((
	842	* =0: download project
	843	* =1: download firmware
	844	* =2: enter the background
	845	)))
	846	\|=(% style="width: 160px;" %)HSW1865\|(% style="width:282px" %)Priority connection to the cloud\|(% style="width:452px" %)(((
	847	* =0: priority Ethernet
	848	* =1: priority WLAN
	849	* =2: priority 4G
	850	)))
	851	\|=(% style="width: 160px;" %)HSW1866\|(% style="width:282px" %)Delete the Lua extension module file\|(% style="width:452px" %)(((
	852	* =0: delete;
	853	* = Others: do not delete
	854	)))
	855	\|=(% style="width: 160px;" %)HSW1867\|(% style="width:282px" %)Reset mode\|(% style="width:452px" %)(((
	856	Monitor address is set during reset of reset switch, whether to cancel reset,
	857
	858	* = 0: yes (default);
	859	* = 1: no
	860	)))
	861	\|=(% style="width: 160px;" %)HSW1868\|(% style="width:282px" %)Double-click or long press the record type table mode\|(% style="width:452px" %)(((
	862	Controls whether the button pops up when double-clicking or long pressing on record type table object
	863
	864	* = 0: yes (default);
	865	* = 1: no
	866	)))
	867	\|=(% style="width: 160px;" %)(((
	868	HSW1869
	869	)))\|(% style="width:282px" %)(((
	870	Dynamic screensaver countdown
	871	)))\|(% style="width:452px" %)(((
	872	Countdown to enter dynamic screensaver effect, unit (S)
	873	)))
	874	\|=(% style="width: 160px;" %)(((
	875	HSW1870
	876	)))\|(% style="width:282px" %)(((
	877	Display or set the dynamic or static IP mode of Ethernet1
	878	)))\|(% style="width:452px" %)(((
	879	HSX1870.0 = 0, Static IP mode
	880
	881	HSX1870.0 = 1, dynamic IP mode
	882	)))
	883	\|=(% style="width: 160px;" %)(((
	884	HSW1871
	885	)))\|(% style="width:282px" %)(((
	886	Confirm the IP, subnet mask, gateway, DNS1, DNS2, and dynamic static IP settings for Ethernet1
	887	)))\|(% style="width:452px" %)(((
	888	~= 1, confirm the setting (i.e., after modifying IP-related information, set this address to 1, representing confirmation of the modification, after which it will be reset to 0)
	889	)))
	890	\|=(% style="width: 160px;" %)(((
	891	HSW1872
	892	)))\|(% colspan="1" rowspan="8" style="width:282px" %)(((
	893	①Display and modify DNS1 and DNS2 of Ethernet1
	894
	895	②Related registers can be read and written mode (only static IP mode can be written)
	896	)))\|(% style="width:452px" %)(((
	897	Ethernet1 Local DNS1 address high byte 1
	898	)))
	899	\|=(% style="width: 160px;" %)(((
	900	HSW1873
	901	)))\|(% style="width:452px" %)Ethernet1 Local DNS1 address high byte 2
	902	\|=(% style="width: 160px;" %)(((
	903	HSW1874
	904	)))\|(% style="width:452px" %)Ethernet1 Local DNS1 address high byte 3
	905	\|=(% style="width: 160px;" %)(((
	906	HSW1875
	907	)))\|(% style="width:452px" %)Ethernet1 Local DNS1 address high byte 4
	908	\|=(% style="width: 160px;" %)(((
	909	HSW1876
	910	)))\|(% style="width:452px" %)Ethernet1 Local DNS2 address high byte 1
	911	\|=(% style="width: 160px;" %)(((
	912	HSW1877
	913	)))\|(% style="width:452px" %)Ethernet1 Local DNS2 address high byte 2
	914	\|=(% style="width: 160px;" %)(((
	915	HSW1878
	916	)))\|(% style="width:452px" %)Ethernet1 Local DNS2 address high byte 3
	917	\|=(% style="width: 160px;" %)(((
	918	HSW1879
	919	)))\|(% style="width:452px" %)Ethernet1 Local DNS2 address high byte 4
	920	\|=(% style="width: 160px;" %)HSW1890\|(% colspan="1" style="width:282px" %)Enable refresh current network signal\|(% style="width:452px" %)(((
	921	* =1: Refresh the network signal once after triggered (This register will be automatically reset after triggered, only update the signal value once after per 15 seconds, not able to update twice in the short interval)
	922	* =Others: not refresh
	923	)))
	924	\|=(% style="width: 160px;" %)HSW1891\|(% colspan="1" style="width:282px" %)Enable clear cache for screen data \|(% style="width:452px" %)(((
	925	* =1, not clear screen cache when switch language
	926	* =2, trigger clear cache of all screens for once time
	927	* =3, always clear cache of all screen data
	928	)))
	929	\|=(% style="width: 160px;" %)HSW1892\|(% colspan="1" style="width:282px" %)Keyboard key polling interval setting\|(% style="width:452px" %)(((
	930	~=0，50ms；
	931
	932	~=1，40ms；
	933
	934	~=2，30ms；
	935
	936	~=3，20ms；
	937
	938	~=4，10ms；
	939	)))
	940	\|=(% style="width: 160px;" %)HSW1893\|(% colspan="1" style="width:282px" %)Cursor mode switch\|(% style="width:452px" %)(((
	941	~=0, default free mode;
	942
	943	~=1, selected box mode;
	944
	945	~=2, selected gray mode;
	946
	947	~=3, mouse selected mode;
	948	)))
	949	\|=(% style="width: 160px;" %)HSW1894\|(% colspan="1" style="width:282px" %)Enable a specific serial keyboard\|(% style="width:452px" %)(((
	950	~=1 Enable;
	951
	952	~=Other, not enabled;
	953
	954	Note: Only valid for initialization, recommended to use in background initialization script;
	955	)))
	956	\|=(% style="width: 160px;" %)HSW1895\|(% colspan="1" style="width:282px" %)Controls whether keyboard keys are effective in certain situations\|(% style="width:452px" %)(((
	957	~=0, by default, the key trigger does not take effect when the screen is off or in screen saver mode;
	958
	959	~=1, HSX1895.0=1, the key trigger will also take effect when the screen is off;
	960
	961	~=2, HSX1895.1=1, the key trigger will also take effect in screen saver mode;
	962	)))
	963	\|=(% style="width: 160px;" %)HSW1903\|(% colspan="1" style="width:282px" %)Check the network cable connection status\|(% style="width:452px" %)If a network cable is detected, it is set to 1; if no network cable is detected, it is set to 0
	964	\|=(% style="width: 160px;" %)HSW10000~~19999\|(% style="width:282px" %)Power-down storage area\|(% style="width:452px" %)After restart, the data remains
	965	\|=(% style="width: 160px;" %)HSW10035\|(% rowspan="13" style="width:282px" %)(((
	966	Note: Valid when Ethernet1 of HMI is plugged into the network cable.
	967	① When the Ethernet setting is enabled in the project parameters, this register displays the set value.
	968	② When the Ethernet setting is not enabled in the engineering parameters, the register displays the Ethernet IP automatically acquired by the HMI.
	969	③ When the HMI is not plugged into the network cable, the register will show 0 whether the engineering parameters are set or not.
	970	④ IP related registers can be read and written (only static IP mode can be written).
	971	)))\|(% style="width:452px" %)Local IP address high byte 1
	972	\|=(% style="width: 160px;" %)HSW10036\|(% style="width:452px" %)Local IP address high byte 2
	973	\|=(% style="width: 160px;" %)HSW10037\|(% style="width:452px" %)Local IP address high byte 3
	974	\|=(% style="width: 160px;" %)HSW10038\|(% style="width:452px" %)Local IP address high byte 4
	975	\|=(% style="width: 160px;" %)HSW10039\|(% style="width:452px" %)Local mask IP address high byte 1
	976	\|=(% style="width: 160px;" %)HSW10040\|(% style="width:452px" %)Local mask IP address high byte 2
	977	\|=(% style="width: 160px;" %)HSW10041\|(% style="width:452px" %)Local mask IP address high byte 3
	978	\|=(% style="width: 160px;" %)HSW10042\|(% style="width:452px" %)Local mask IP address high byte 4
	979	\|=(% style="width: 160px;" %)HSW10043\|(% style="width:452px" %)Local gateway address high byte 1
	980	\|=(% style="width: 160px;" %)HSW10044\|(% style="width:452px" %)Local gateway address high byte 2
	981	\|=(% style="width: 160px;" %)HSW10045\|(% style="width:452px" %)Local gateway address high byte 3
	982	\|=(% style="width: 160px;" %)HSW10046\|(% style="width:452px" %)Local gateway address high byte 4
	983	\|=(% style="width: 160px;" %)HSW10047\|(% style="width:452px" %)Local port address
	984	\|=(% style="width: 160px;" %)HSW10048\|(% rowspan="6" style="width:282px" %)(((
	985	①Display the MAC code of Ethernet1 NIC
	986
	987	(hexadecimal display)
	988
	989	②Read-only mode, not modifiable
	990	)))\|(% style="width:452px" %)Local MAC code high word 1
	991	\|=(% style="width: 160px;" %)HSW10049\|(% style="width:452px" %)Local MAC code high word 2
	992	\|=(% style="width: 160px;" %)HSW10050\|(% style="width:452px" %)Local MAC code high word 3
	993	\|=(% style="width: 160px;" %)HSW10051\|(% style="width:452px" %)Local MAC code high word 4
	994	\|=(% style="width: 160px;" %)HSW10052\|(% style="width:452px" %)Local MAC code high word 5
	995	\|=(% style="width: 160px;" %)HSW10053\|(% style="width:452px" %)Local MAC code high word 6
	996	\|=(% style="width: 160px;" %)HSW10118\|(% colspan="1" rowspan="2" style="width:282px" %)TSAP settings for HMI in the Siemens LOGO! 8 protocol\|(% style="width:452px" %)HMI local TSAP, which corresponds to the remote TSAP of PLC
	997	\|=(% style="width: 160px;" %)HSW10119\|(% style="width:452px" %)HMI remote TSAP, which corresponds to the local TSAP of PLC
	998	\|=(% style="width: 160px;" %)HSW10461~~10493\|(% style="width:282px" %)Remote access password\|(% style="width:452px" %)8-character remote access password
	999	\|=(% style="width: 160px;" %)HSW10494~~10558\|(% style="width:282px" %)Machine ID (Read only)\|(% style="width:452px" %)Machine ID for remote access (read only 64-bit)
	1000	\|=(% style="width: 160px;" %)HSW10576\|(% style="width:282px" %)Save dynamic installment settings\|(% style="width:452px" %)HSX10576.0=1: Save the set dynamic installment information
	1001	\|=(% style="width: 160px;" %)HSW10577\|(% style="width:282px" %)Control address for installment\|(% style="width:452px" %)(((
	1002	* HSX10577.0=0: disable dynamic installment
	1003	* HSX10577.0=1: enable dynamic installment
	1004	* HSX10577.1=0: disable static installment
	1005	* HSX10577.1=1: enable static installment
	1006	)))
	1007	\|=(% style="width: 160px;" %)HSW10578-10583\|(% style="width:282px" %)Password for dynamic installment\|(% style="width:452px" %)Character Input/ Display (length: 6)
	1008	\|=(% style="width: 160px;" %)HSW10584-10586\|(% style="width:282px" %)Expiry time of dynamic installment\|(% style="width:452px" %)Expiry time: YYYYMMDD (Numeric Input/ Display)
	1009	\|=(% style="width: 160px;" %)HSW10587-10589\|(% style="width:282px" %)Last expiry time of dynamic installment\|(% style="width:452px" %)Expiry time: YYYYMMDD (Numeric Input/ Display)
	1010	\|=(% style="width: 160px;" %)HSW10590\|(% style="width:282px" %)Background light time\|(% style="width:452px" %)(((
	1011	Set the light time for background
	1012
	1013	* =0: The screen backlight is always on.
	1014	* =Others: The screen backlight is on for a period of time and then turns off. The length of time is controlled by the value of the register address. Unit: second.
	1015	)))
	1016	\|=(% style="width: 160px;" %)HSW10591\|(% style="width:282px" %)Backlight brightness adjustment\|(% style="width:452px" %)Backlight brightness range: 1 (darkest) ~~ 100 (brightest)
	1017	\|=(% style="width: 160px;" %)HSW10603\|(% style="width:282px" %)Set the printer to print orientation\|(% style="width:452px" %)(((
	1018	Set the print direction:
	1019
	1020	* =1: Forward printing
	1021	* =2: Reverse print
	1022	* =Other: Forward print
	1023	)))
	1024	\|=(% style="width: 160px;" %)HSW10604\|(% style="width:282px" %)Print dot type\|(% style="width:452px" %)(((
	1025	* =1: new firmware 8 dot matrix type
	1026	* =2: new firmware 24 dot matrix type
	1027	* =3: old firmware 8 dot matrix type
	1028	* =4: old firmware 24 dot matrix type
	1029	* =Other: new firmware 8 dot matrix type
	1030	)))
	1031	\|=(% style="width: 160px;" %)HSW10605\|(% style="width:282px" %)Print width of printer\|(% style="width:452px" %)Set the width of the printer to print (in pixels), such as HSW10605 = 394: The printer supports images with a print width of 394 pixels
	1032	\|=(% style="width: 160px;" %)HSW10606\|(% style="width:282px" %)Printer instruction type\|(% style="width:452px" %)(((
	1033	* =1: Graphic print type
	1034	* =2: Dot density printing type
	1035	* =3(Default value): special for EPSON printer
	1036	)))
	1037	\|=(% style="width: 160px;" %)HSW10607\|(% style="width:282px" %)Printer paper cutting function\|(% style="width:452px" %)(((
	1038	* =1: Enable
	1039	* =2: Disable
	1040	)))
	1041	\|=(% style="width: 160px;" %)HSW10608\|(% style="width:282px" %)Print the alignment of the text\|(% style="width:452px" %)(((
	1042	* =1: Left alignment
	1043	* =2: Center alignment
	1044	* =3: Right alignment
	1045	)))
	1046	\|=(% style="width: 160px;" %)HSW10611\|(% style="width:282px" %)Set weconcloud server\|(% style="width:452px" %)(((
	1047	* =0: Select the server configured in "Project Settings"
	1048	* =1: select Server 1
	1049	* =2: select Server 2
	1050	)))
	1051	\|=(% style="width: 160px;" %)HSW11750\|(% style="width:282px" %)Set the language of the Message List prompt (ie series)\|(% style="width:452px" %)(((
	1052	* =0: which is followed the project language
	1053	* =1: English
	1054	* =2: Chinese
	1055	)))
	1056	\|=(% style="width: 160px;" %)HSW11752\|(% style="width:282px" %)Traffic monitoring control\|(% style="width:452px" %)= 1: Enable the flow monitoring function
	1057	~= Other: Disable the flow monitoring function
	1058	\|=(% style="width: 160px;" %)HSW11753\|(% style="width:282px" %)Traffic monitoring network card type\|(% style="width:452px" %)= 0: Ethernet card
	1059	~= 1: 4G
	1060	~= 2: Wi-Fi
	1061	\|=(% style="width: 160px;" %)HSW11754-11755\|(% style="width:282px" %)Historical traffic consumption\|(% style="width:452px" %)The total traffic consumed historically (bytes) [value is an integer]
	1062	\|=(% style="width: 160px;" %)HSW11756\|(% style="width:282px" %)(((
	1063	Access permission restrictions
	1064
	1065	(ig series and 8000/9000 series with -R after system upgrade)
	1066	)))\|(% style="width:452px" %)(((
	1067	* =0: LAN or the external network both OK
	1068	* =1: Only LAN access
	1069	* =2: Only external network can access
	1070	* =3: Close the functions
	1071	)))
	1072	\|=(% style="width: 160px;" %)HSW11757\|(% style="width:282px" %)Enable the valid date of the dynamic installment password\|(% style="width:452px" %)(((
	1073	* =0: Disabled
	1074	* =1: Enable
	1075	)))
	1076	\|=(% style="width: 160px;" %)HSW11758\|(% style="width:282px" %)Enable Screensaver\|(% style="width:452px" %)(((
	1077	* =0: Disabled
	1078	* =1: Enable
	1079	)))
	1080	\|=(% style="width: 160px;" %)HSW11759\|(% style="width:282px" %)Screensaver interval time\|(% style="width:452px" %)(((
	1081	Set the time how long will enter Screensaver (Range 10~~43200s)
	1082	)))
	1083	\|=(% style="width: 160px;" %)HSW11760\|(% style="width:282px" %)Screensaver countdown\|(% style="width:452px" %)Display the countdown to enter the Screensaver, unit: second.
	1084	\|=(% style="width: 160px;" %)HSW11761\|(% style="width:282px" %)Screensaver screen number\|(% style="width:452px" %)Set the screen number for Screensaver
	1085	\|=(% style="width: 160px;" %)(((
	1086	HSW11762
	1087	)))\|(% style="width:282px" %)(((
	1088	Dynamic screensaver control address
	1089	)))\|(% style="width:452px" %)(((
	1090	HSX11762.0=0, initialize with project configuration;
	1091
	1092	HSX11762.0=1, initialize with special register configuration;
	1093
	1094	HSX11762.1=0, disable dynamic screensaver;
	1095
	1096	HSX11762.1=1, enable dynamic screensaver
	1097	)))
	1098	\|=(% style="width: 160px;" %)(((
	1099	HSW11763
	1100	)))\|(% style="width:282px" %)(((
	1101	Waiting time to enter the dynamic screensaver
	1102	)))\|(% style="width:452px" %)(((
	1103	Waiting time when the screen is not operated, range 1~~720 minutes
	1104	)))
	1105	\|=(% style="width: 160px;" %)(((
	1106	HSW11764
	1107	)))\|(% style="width:282px" %)(((
	1108	Animated screensaver animation type
	1109	)))\|(% style="width:452px" %)(((
	1110	~=0: Raster,=1: Blinds,=2: Bubble
	1111	)))
	1112	\|=(% style="width: 160px;" %)HSW11767\|(% style="width:282px" %)Remote screen display adaptation mode switching\|(% style="width:452px" %)=0, default mode, remote full-screen zoom display for horizontal screen projects, remote proportional zoom display for vertical screen projects;
	1113	~=1, full-screen zoom display;
	1114	~=2, proportional zoom display according to screen size ratio;
	1115	~=3, no zoom display according to screen pixels;
	1116	\|=(% style="width: 160px;" %)HSW11773\|(% style="width:282px" %)Automatically log out user control address\|(% style="width:452px" %)=3: that is, HSX11773.0=1, HSX11773.1=1, based on the configuration in the address, enable automatic user logout.
	1117	\|=(% style="width: 160px;" %)HSW11774\|(% style="width:282px" %)Automatic user logout interval\|(% style="width:452px" %)(((
	1118	Range: 1 to 255
	1119
	1120	Unit: Minutes
	1121	)))
3.1	1122	\|=(% style="width: 160px;" %)HSW11815\|(% style="width:282px" %)Sub-screen drag function (For PI10.4 and above)\|(% style="width:452px" %)(((
2.1	1123	* =0: Disabled
	1124	* =1: Enable
	1125	)))
5.1	1126	\|=(% style="width: 160px;" %)HSW11816\|(% style="width:282px" %)Recipe record component button spacing control\|(% style="width:452px" %)This controls the spacing between the top and bottom rows of buttons in all recipe record widgets. The value is the pixel spacing between the buttons. The minimum value is 0, and the maximum value is calculated based on the width of each recipe widget. The spacing plus the button size must not exceed the widget's size. (Note that if the register is greater than the maximum value, the actual spacing is the maximum spacing.)
1.1	1127
	1128	== Serial port communication configuration ==
	1129
	1130	(% class="table-bordered" %)
	1131	\|=(% scope="row" style="width: 102px;" %)Port\|=(% style="width: 173px;" %)Function\|=(% style="width: 122px;" %)Address\|=(% colspan="2" style="width: 506px;" %)Description
	1132	\|(% colspan="1" rowspan="11" style="width:102px" %)COM1\|(% style="width:173px" %)Communication mode\|(% style="width:122px" %)HSW10061\|(% colspan="2" style="width:506px" %)(((
	1133	* =0: RS232
	1134	* =1: RS485
	1135	* =2: RS422
	1136	)))
	1137	\|(% style="width:173px" %)Baud rate\|(% style="width:122px" %)HSW10062\|(% colspan="2" style="width:506px" %)(((
	1138	* =0: 1200
	1139	* =1: 2400
	1140	* =2: 4800
	1141	* =3: 9600
	1142	* =4: 19200
	1143	* =5: 38400
	1144	* =6: 57600
	1145	* =7: 115200
4.1	1146	* =8: 187500
	1147	* =9: 230400
1.1	1148	)))
	1149	\|(% style="width:173px" %)Data bit\|(% style="width:122px" %)HSW10063\|(% colspan="2" style="width:506px" %)(((
	1150	* =7: 7 bit
	1151	* =8: 8 bit
	1152	)))
	1153	\|(% style="width:173px" %)Stop bit\|(% style="width:122px" %)HSW10064\|(% colspan="2" style="width:506px" %)(((
	1154	* =1: 1 bit
	1155	* =2: 2 bit
	1156	)))
	1157	\|(% style="width:173px" %)Check bit\|(% style="width:122px" %)HSW10065\|(% colspan="2" style="width:506px" %)(((
	1158	* =0: None
	1159	* =1: ODD
	1160	* =2: EVEN
	1161	)))
	1162	\|(% style="width:173px" %)Wait timeout\|(% style="width:122px" %)HSW10066\|(% colspan="2" style="width:506px" %)(((
	1163	* Unit: ms.
	1164	* Range: 0 to 30000
	1165	)))
	1166	\|(% style="width:173px" %)reveive timeout\|(% style="width:122px" %)HSW10067\|(% colspan="2" style="width:506px" %)(((
	1167	* Unit: ms.
	1168	* Range: 0 to 30000
	1169	)))
	1170	\|(% style="width:173px" %)Retry time\|(% style="width:122px" %)HSW10068\|(% colspan="2" style="width:506px" %)(((
	1171	* Unit: times.
	1172	* Range: 0 to 100
	1173	)))
	1174	\|(% style="width:173px" %)Retry timeout\|(% style="width:122px" %)HSW10069\|(% colspan="2" style="width:506px" %)(((
	1175	* Unit: s.
	1176	* Range: 0 to 300
	1177	)))
	1178	\|(% style="width:173px" %)HMI station number\|(% style="width:122px" %)HSW10070\|(% colspan="2" style="width:506px" %)
	1179	\|(% style="width:173px" %)PLC station number\|(% style="width:122px" %)HSW10071\|(% colspan="2" style="width:506px" %)
	1180	\|(% colspan="1" rowspan="11" style="width:102px" %)COM1-2\|(% style="width:173px" %)Communication mode\|(% style="width:122px" %)HSW10094\|(% colspan="2" style="width:506px" %)(((
	1181	* =0: RS232
	1182	* =1: RS485
	1183	* =2: RS422
	1184	* =6: RS485-2
	1185	)))
	1186	\|(% style="width:173px" %)Baud rate\|(% style="width:122px" %)HSW10095\|(% colspan="2" style="width:506px" %)(((
	1187	* =0: 1200
	1188	* =1: 2400
	1189	* =2: 4800
	1190	* =3: 9600
	1191	* =4: 19200
	1192	* =5: 38400
	1193	* =6: 57600
	1194	* =7: 115200
	1195	* =8: 230400
	1196	)))
	1197	\|(% style="width:173px" %)Data bit\|(% style="width:122px" %)HSW10096\|(% colspan="2" style="width:506px" %)(((
	1198	* =7: 7 bit
	1199	* =8: 8 bit
	1200	)))
	1201	\|(% style="width:173px" %)Stop bit\|(% style="width:122px" %)HSW10097\|(% colspan="2" style="width:506px" %)(((
	1202	* =1: 1 bit
	1203	* =2: 2 bit
	1204	)))
	1205	\|(% style="width:173px" %)Check bit\|(% style="width:122px" %)HSW10098\|(% colspan="2" style="width:506px" %)(((
	1206	* =0: None
	1207	* =1: ODD
	1208	* =2: EVEN
	1209	)))
	1210	\|(% style="width:173px" %)Wait timeout\|(% style="width:122px" %)HSW10099\|(% colspan="2" style="width:506px" %)(((
	1211	* Unit: ms.
	1212	* Range: 0 to 30000
	1213	)))
	1214	\|(% style="width:173px" %)receive timeout\|(% style="width:122px" %)HSW10100\|(% colspan="2" style="width:506px" %)(((
	1215	* Unit: ms.
	1216	* Range: 0 to 30000
	1217	)))
	1218	\|(% style="width:173px" %)Retry time\|(% style="width:122px" %)HSW10101\|(% colspan="2" style="width:506px" %)(((
	1219	* Unit: times.
	1220	* Range: 0 to 100
	1221	)))
	1222	\|(% style="width:173px" %)Retry timeout\|(% style="width:122px" %)HSW10102\|(% colspan="2" style="width:506px" %)(((
	1223	* Unit: s.
	1224	* Range: 0 to 30
	1225	)))
	1226	\|(% style="width:173px" %)HMI station number\|(% style="width:122px" %)HSW10103\|(% colspan="2" style="width:506px" %)
	1227	\|(% style="width:173px" %)PLC station number\|(% style="width:122px" %)HSW10104\|(% colspan="2" style="width:506px" %)
	1228	\|(% colspan="1" rowspan="11" style="width:102px" %)COM1-3\|(% style="width:173px" %)Communication mode\|(% style="width:122px" %)HSW10120\|(% colspan="2" style="width:506px" %)(((
	1229	* =0: RS232
	1230	* =1: RS485
	1231	* =2: RS422
	1232	* =6: RS485-2
	1233	)))
	1234	\|(% style="width:173px" %)Baud rate\|(% style="width:122px" %)HSW10121\|(% colspan="2" style="width:506px" %)(((
	1235	* =0: 1200
	1236	* =1: 2400
	1237	* =2: 4800
	1238	* =3: 9600
	1239	* =4: 19200
	1240	* =5: 38400
	1241	* =6: 57600
	1242	* =7: 115200
	1243	* =8: 230400
	1244	)))
	1245	\|(% style="width:173px" %)Data bit\|(% style="width:122px" %)HSW10122\|(% colspan="2" style="width:506px" %)(((
	1246	* =7: 7 bit
	1247	* =8: 8 bit
	1248	)))
	1249	\|(% style="width:173px" %)Stop bit\|(% style="width:122px" %)HSW10123\|(% colspan="2" style="width:506px" %)(((
	1250	* =1: 1 bit
	1251	* =2: 2 bit
	1252	)))
	1253	\|(% style="width:173px" %)Check bit\|(% style="width:122px" %)HSW10124\|(% colspan="2" style="width:506px" %)(((
	1254	* =0: None
	1255	* =1: ODD
	1256	* =2: EVEN
	1257	)))
	1258	\|(% style="width:173px" %)Wait timeout\|(% style="width:122px" %)HSW10125\|(% colspan="2" style="width:506px" %)(((
	1259	* Unit: ms.
	1260	* Range: 0 to 30000
	1261	)))
	1262	\|(% style="width:173px" %)receive timeout\|(% style="width:122px" %)HSW10126\|(% colspan="2" style="width:506px" %)(((
	1263	* Unit: ms.
	1264	* Range: 0 to 30000
	1265	)))
	1266	\|(% style="width:173px" %)Retry time\|(% style="width:122px" %)HSW10127\|(% colspan="2" style="width:506px" %)(((
	1267	* Unit: times.
	1268	* Range: 0 to 100
	1269	)))
	1270	\|(% style="width:173px" %)Retry timeout\|(% style="width:122px" %)HSW10128\|(% colspan="2" style="width:506px" %)(((
	1271	* Unit: s.
	1272	* Range: 0 to 30
	1273	)))
	1274	\|(% style="width:173px" %)HMI station number\|(% style="width:122px" %)HSW10129\|(% colspan="2" style="width:506px" %)
	1275	\|(% style="width:173px" %)PLC station number\|(% style="width:122px" %)HSW10130\|(% colspan="2" style="width:506px" %)
	1276	\|(% colspan="1" rowspan="11" style="width:102px" %)COM2\|(% style="width:173px" %)Communication mode\|(% style="width:122px" %)HSW10072\|(% colspan="2" style="width:506px" %)(((
	1277	* =0: RS232
	1278	* =1: RS485
	1279	)))
	1280	\|(% style="width:173px" %)Baud rate\|(% style="width:122px" %)HSW10073\|(% colspan="2" style="width:506px" %)(((
	1281	* =0: 1200
	1282	* =1: 2400
	1283	* =2: 4800
	1284	* =3: 9600
	1285	* =4: 19200
	1286	* =5: 38400
	1287	* =6: 57600
	1288	* =7: 115200
	1289	* =8: 230400
	1290	)))
	1291	\|(% style="width:173px" %)Data bit\|(% style="width:122px" %)HSW10074\|(% colspan="2" style="width:506px" %)(((
	1292	* =7: 7 bit
	1293	* =8: 8 bit
	1294	)))
	1295	\|(% style="width:173px" %)Stop bit\|(% style="width:122px" %)HSW10075\|(% colspan="2" style="width:506px" %)(((
	1296	* =1: 1 bit
	1297	* =2: 2 bit
	1298	)))
	1299	\|(% style="width:173px" %)Check bit\|(% style="width:122px" %)HSW10076\|(% colspan="2" style="width:506px" %)(((
	1300	* =0: None
	1301	* =1: ODD
	1302	* =2: EVEN
	1303	)))
	1304	\|(% style="width:173px" %)Wait timeout\|(% style="width:122px" %)HSW10077\|(% colspan="2" style="width:506px" %)(((
	1305	* Unit: ms.
	1306	* Range: 0 to 30000
	1307	)))
	1308	\|(% style="width:173px" %)receive timeout\|(% style="width:122px" %)HSW10078\|(% colspan="2" style="width:506px" %)(((
	1309	* Unit: ms.
	1310	* Range: 0 to 30000
	1311	)))
	1312	\|(% style="width:173px" %)Retry time\|(% style="width:122px" %)HSW10079\|(% colspan="2" style="width:506px" %)(((
	1313	* Unit: times.
	1314	* Range: 0 to 100
	1315	)))
	1316	\|(% style="width:173px" %)Retry timeout\|(% style="width:122px" %)HSW10080\|(% colspan="2" style="width:506px" %)(((
	1317	* Unit: s.
	1318	* Range: 0 to 30
	1319	)))
	1320	\|(% style="width:173px" %)HMI station number\|(% style="width:122px" %)HSW10081\|(% colspan="2" style="width:506px" %)
	1321	\|(% style="width:173px" %)PLC station number\|(% style="width:122px" %)HSW10082\|(% colspan="2" style="width:506px" %)
	1322	\|(% colspan="1" rowspan="11" style="width:102px" %)COM2-2\|(% style="width:173px" %)Communication mode\|(% style="width:122px" %)HSW10105\|(% colspan="2" style="width:506px" %)(((
	1323	* =0: RS232
	1324	* =1: RS485
	1325	)))
	1326	\|(% style="width:173px" %)Baud rate\|(% style="width:122px" %)HSW10106\|(% colspan="2" style="width:506px" %)(((
	1327	* =0: 1200
	1328	* =1: 2400
	1329	* =2: 4800
	1330	* =3: 9600
	1331	* =4: 19200
	1332	* =5: 38400
	1333	* =6: 57600
	1334	* =7: 115200
	1335	* =8: 230400
	1336	)))
	1337	\|(% style="width:173px" %)Data bit\|(% style="width:122px" %)HSW10107\|(% colspan="2" style="width:506px" %)(((
	1338	* =7: 7 bit
	1339	* =8: 8 bit
	1340	)))
	1341	\|(% style="width:173px" %)Stop bit\|(% style="width:122px" %)HSW10108\|(% colspan="2" style="width:506px" %)(((
	1342	* =1: 1 bit
	1343	* =2: 2 bit
	1344	)))
	1345	\|(% style="width:173px" %)Check bit\|(% style="width:122px" %)HSW10109\|(% colspan="2" style="width:506px" %)(((
	1346	* =0: None
	1347	* =1: ODD
	1348	* =2: EVEN
	1349	)))
	1350	\|(% style="width:173px" %)Wait timeout\|(% style="width:122px" %)HSW10110\|(% colspan="2" style="width:506px" %)(((
	1351	* Unit: ms.
	1352	* Range: 0 to 30000
	1353	)))
	1354	\|(% style="width:173px" %)receive timeout\|(% style="width:122px" %)HSW10111\|(% colspan="2" style="width:506px" %)(((
	1355	* Unit: ms.
	1356	* Range: 0 to 30000
	1357	)))
	1358	\|(% style="width:173px" %)Retry time\|(% style="width:122px" %)HSW10112\|(% colspan="2" style="width:506px" %)(((
	1359	* Unit: times.
	1360	* Range: 0 to 100
	1361	)))
	1362	\|(% style="width:173px" %)Retry timeout\|(% style="width:122px" %)HSW10113\|(% colspan="2" style="width:506px" %)(((
	1363	* Unit: s.
	1364	* Range: 0 to 30
	1365	)))
	1366	\|(% style="width:173px" %)HMI station number\|(% style="width:122px" %)HSW10114\|(% colspan="2" style="width:506px" %)
	1367	\|(% style="width:173px" %)PLC station number\|(% style="width:122px" %)HSW10115\|(% colspan="2" style="width:506px" %)
	1368	\|(% colspan="1" rowspan="11" style="width:102px" %)COM3\|(% style="width:173px" %)Communication mode\|(% style="width:122px" %)HSW10083\|(% colspan="2" style="width:506px" %)(((
	1369	* =1: RS485
	1370	)))
	1371	\|(% style="width:173px" %)Baud rate\|(% style="width:122px" %)HSW10084\|(% colspan="2" style="width:506px" %)(((
	1372	* =0: 1200
	1373	* =1: 2400
	1374	* =2: 4800
	1375	* =3: 9600
	1376	* =4: 19200
	1377	* =5: 38400
	1378	* =6: 57600
	1379	* =7: 115200
	1380	* =8: 230400
	1381	)))
	1382	\|(% style="width:173px" %)Data bit\|(% style="width:122px" %)HSW10085\|(% colspan="2" style="width:506px" %)(((
	1383	* =7: 7 bit
	1384	* =8: 8 bit
	1385	)))
	1386	\|(% style="width:173px" %)Stop bit\|(% style="width:122px" %)HSW10086\|(% colspan="2" style="width:506px" %)(((
	1387	* =1: 1 bit
	1388	* =2: 2 bit
	1389	)))
	1390	\|(% style="width:173px" %)Check bit\|(% style="width:122px" %)HSW10087\|(% colspan="2" style="width:506px" %)(((
	1391	* =0: None
	1392	* =1: ODD
	1393	* =2: EVEN
	1394	)))
	1395	\|(% style="width:173px" %)Wait timeout\|(% style="width:122px" %)HSW10088\|(% colspan="2" style="width:506px" %)(((
	1396	* Unit: ms.
	1397	* Range: 0 to 30000
	1398	)))
	1399	\|(% style="width:173px" %)receive timeout\|(% style="width:122px" %)HSW10089\|(% colspan="2" style="width:506px" %)(((
	1400	* Unit: ms.
	1401	* Range: 0 to 30000
	1402	)))
	1403	\|(% style="width:173px" %)Retry time\|(% style="width:122px" %)HSW10090\|(% colspan="2" style="width:506px" %)(((
	1404	* Unit: times.
	1405	* Range: 0 to 100
	1406	)))
	1407	\|(% style="width:173px" %)Retry timeout\|(% style="width:122px" %)HSW10091\|(% colspan="2" style="width:506px" %)(((
	1408	* Unit: s.
	1409	* Range: 0 to 30
	1410	)))
	1411	\|(% style="width:173px" %)HMI station number\|(% style="width:122px" %)HSW10092\|(% colspan="2" style="width:506px" %)
	1412	\|(% style="width:173px" %)PLC station number\|(% style="width:122px" %)HSW10093\|(% colspan="2" style="width:506px" %)
	1413	\|(% colspan="1" rowspan="2" style="width:102px" %)CAN port\|(% style="width:173px" %)CAN1 baud rate\|(% style="width:122px" %)HSW010116\|(% style="width:299px" %)(((
	1414	Unit: K, the baud rate must be an integer.
	1415
	1416	For example, when the baud rate required is 250000, just enter 250.
	1417	)))\|(% colspan="1" rowspan="2" style="width:218px" %)✎Note: If baud rate has been modified,please wait 5 seconds,then restart the HMI to take effect.
	1418	\|(% style="width:173px" %)CAN2 baud rate\|(% style="width:122px" %)HSW010117\|(% style="width:299px" %)(((
	1419	Unit: K, the baud rate must be an integer.
	1420
	1421	For example, when the baud rate required is 250000, just enter 250.
	1422	)))
	1423
	1424	== Ethernet communication configuration ==
	1425
	1426	(% class="table-bordered" %)
	1427	\|(% style="width:40px" %)No.\|(% style="width:295px" %)Function\|(% style="width:220px" %)Address\|(% style="width:336px" %)Description
	1428	\|(% rowspan="7" style="width:40px" %)1\|(% colspan="1" rowspan="7" style="width:295px" %)Ethernet parameter configuration for communication number 1 in list. Configure those addresses according to connected device. After configuration, wait for 5 seconds and restart the HMI.\|(% style="width:220px" %)HSW11004\|(% style="width:336px" %)Device IP address high word 1
	1429	\|(% style="width:220px" %)HSW11005\|(% style="width:336px" %)Device IP address high word 2
	1430	\|(% style="width:220px" %)HSW11006\|(% style="width:336px" %)Device IP address high word 3
	1431	\|(% style="width:220px" %)HSW11007\|(% style="width:336px" %)Device IP address high word 4
	1432	\|(% style="width:220px" %)HSW11008\|(% style="width:336px" %)Device Port number
	1433	\|(% style="width:220px" %)HSW11009\|(% style="width:336px" %)(((
	1434	~=2 TCP
	1435
	1436	~=3 UDP
	1437	)))
	1438	\|(% style="width:220px" %)HSW11010\|(% style="width:336px" %)Reserved
	1439	\|(% rowspan="7" style="width:40px" %)2\|(% colspan="1" rowspan="7" style="width:295px" %)Ethernet parameter configuration for communication number 2 in list. Configure those addresses according to connected device. After configuration, wait for 5 seconds and restart the HMI.\|(% style="width:220px" %)HSW11011\|(% style="width:336px" %)Device IP address high word 1
	1440	\|(% style="width:220px" %)HSW11012\|(% style="width:336px" %)Device IP address high word 2
	1441	\|(% style="width:220px" %)HSW11013\|(% style="width:336px" %)Device IP address high word 3
	1442	\|(% style="width:220px" %)HSW11014\|(% style="width:336px" %)Device IP address high word 4
	1443	\|(% style="width:220px" %)HSW11015\|(% style="width:336px" %)Device Port number
	1444	\|(% style="width:220px" %)HSW11016\|(% style="width:336px" %)(((
	1445	~=2 TCP
	1446
	1447	~=3 UDP
	1448	)))
	1449	\|(% style="width:220px" %)HSW11017\|(% style="width:336px" %)Reserved
	1450	\|(% style="width:40px" %)…\|(% style="width:295px" %) \|(% style="width:220px" %)…\|(% style="width:336px" %)…
	1451	\|(% rowspan="7" style="width:40px" %)32\|(% colspan="1" rowspan="7" style="width:295px" %)Ethernet parameter configuration for communication number 32 in list. Configure those addresses according to connected device. After configuration, wait for 5 seconds and restart the HMI.\|(% style="width:220px" %)HSW11221\|(% style="width:336px" %)Device IP address high word 1
	1452	\|(% style="width:220px" %)HSW11222\|(% style="width:336px" %)Device IP address high word 2
	1453	\|(% style="width:220px" %)HSW11223\|(% style="width:336px" %)Device IP address high word 3
	1454	\|(% style="width:220px" %)HSW11224\|(% style="width:336px" %)Device IP address high word 4
	1455	\|(% style="width:220px" %)HSW11225\|(% style="width:336px" %)Device Port number
	1456	\|(% style="width:220px" %)HSW11226\|(% style="width:336px" %)(((
	1457	~=2 TCP;
	1458
	1459	~=3 UDP
	1460	)))
	1461	\|(% style="width:220px" %)HSW11227\|(% style="width:336px" %)Reserved
	1462
	1463	(% class="box infomessage" %)
	1464	(((
	1465	✎Note: The number of Ethernet connections supported by different HMI series varies.
	1466	)))
	1467
	1468	== Communication control ==
	1469
	1470	(% class="table-bordered" %)
	1471	\|=(% style="width: 135px;" %)Communication No.\|=(% style="width: 102px;" %)Station No.\|=(% style="width: 185px;" %)Control bit\|=(% style="width: 191px;" %)Communication lamp\|=(% style="width: 271px;" %)Description
	1472	\|(% colspan="1" rowspan="16" style="width:135px" %)1\|(% style="width:102px" %)0~~15\|(% style="width:185px" %)HSX550.0～HSX550.15\|(% style="width:191px" %)HSX558.0～HSX558.15\|(% rowspan="160" style="width:271px" %)Communication number refers to the number in "Communication Port Configuration". A number provides 256 device station numbers. Each station number corresponds to a communication control bit and a communication indicator bit. Registers HSX550.0 to HSX805.15 are used to control the station numbers from 0 to 127, and registers HSX1150.0 to HSX1405.15 are used to control station numbers 128 to 255.
	1473	\|(% style="width:102px" %)16~~31\|(% style="width:185px" %)HSX551.0～HSX551.15\|(% style="width:191px" %)HSX559.0～HSX559.15
	1474	\|(% style="width:102px" %)32~~47\|(% style="width:185px" %)HSX552.0～HSX552.15\|(% style="width:191px" %)HSX560.0～HSX560.15
	1475	\|(% style="width:102px" %)48~~63\|(% style="width:185px" %)HSX553.0～HSX553.15\|(% style="width:191px" %)HSX561.0～HSX561.15
	1476	\|(% style="width:102px" %)64～79\|(% style="width:185px" %)HSX554.0～HSX554.15\|(% style="width:191px" %)HSX562.0～HSX562.15
	1477	\|(% style="width:102px" %)80～95\|(% style="width:185px" %)HSX555.0～HSX555.15\|(% style="width:191px" %)HSX563.0～HSX563.15
	1478	\|(% style="width:102px" %)96～111\|(% style="width:185px" %)HSX556.0～HSX556.15\|(% style="width:191px" %)HSX564.0～HSX564.15
	1479	\|(% style="width:102px" %)112～127\|(% style="width:185px" %)HSX557.0～HSX557.15\|(% style="width:191px" %)HSX565.0～HSX565.15
	1480	\|(% style="width:102px" %)128～143\|(% style="width:185px" %)HSX1150.0～HSX1150.15\|(% style="width:191px" %)HSX1158.0～HSX1158.15
	1481	\|(% style="width:102px" %)144～159\|(% style="width:185px" %)HSX1151.0～HSX1151.15\|(% style="width:191px" %)HSX1159.0～HSX1159.15
	1482	\|(% style="width:102px" %)160～175\|(% style="width:185px" %)HSX1152.0～HSX1152.15\|(% style="width:191px" %)HSX1160.0～HSX1160.15
	1483	\|(% style="width:102px" %)176～191\|(% style="width:185px" %)HSX1153.0～HSX1153.15\|(% style="width:191px" %)HSX1161.0～HSX1161.15
	1484	\|(% style="width:102px" %)192～207\|(% style="width:185px" %)HSX1154.0～HSX1154.15\|(% style="width:191px" %)HSX1162.0～HSX1162.15
	1485	\|(% style="width:102px" %)208～223\|(% style="width:185px" %)HSX1155.0～HSX1155.15\|(% style="width:191px" %)HSX1163.0～HSX1163.15
	1486	\|(% style="width:102px" %)224～239\|(% style="width:185px" %)HSX1156.0～HSX1156.15\|(% style="width:191px" %)HSX1164.0～HSX1164.15
	1487	\|(% style="width:102px" %)240～255\|(% style="width:185px" %)HSX1157.0～HSX1157.15\|(% style="width:191px" %)HSX1165.0～HSX1165.15
	1488	\|(% colspan="1" rowspan="16" style="width:135px" %)2\|(% style="width:102px" %)0～15\|(% style="width:185px" %)HSX566.0～HSX566.15\|(% style="width:191px" %)HSX574.0～HSX574.15
	1489	\|(% style="width:102px" %)16～31\|(% style="width:185px" %)HSX567.0～HSX567.15\|(% style="width:191px" %)HSX575.0～HSX575.15
	1490	\|(% style="width:102px" %)32～47\|(% style="width:185px" %)HSX568.0～HSX568.15\|(% style="width:191px" %)HSX576.0～HSX576.15
	1491	\|(% style="width:102px" %)48～63\|(% style="width:185px" %)HSX569.0～HSX569.15\|(% style="width:191px" %)HSX577.0～HSX577.15
	1492	\|(% style="width:102px" %)64～79\|(% style="width:185px" %)HSX570.0～HSX570.15\|(% style="width:191px" %)HSX578.0～HSX578.15
	1493	\|(% style="width:102px" %)80～95\|(% style="width:185px" %)HSX571.0～HSX571.15\|(% style="width:191px" %)HSX579.0～HSX579.15
	1494	\|(% style="width:102px" %)96～111\|(% style="width:185px" %)HSX572.0～HSX572.15\|(% style="width:191px" %)HSX580.0～HSX580.15
	1495	\|(% style="width:102px" %)112～127\|(% style="width:185px" %)HSX573.0～HSX573.15\|(% style="width:191px" %)HSX581.0～HSX581.15
	1496	\|(% style="width:102px" %)128～143\|(% style="width:185px" %)HSX1166.0～HSX1166.15\|(% style="width:191px" %)HSX1174.0～HSX1174.15
	1497	\|(% style="width:102px" %)144～159\|(% style="width:185px" %)HSX1167.0～HSX1167.15\|(% style="width:191px" %)HSX1175.0～HSX1175.15
	1498	\|(% style="width:102px" %)160～175\|(% style="width:185px" %)HSX1168.0～HSX1168.15\|(% style="width:191px" %)HSX1176.0～HSX1176.15
	1499	\|(% style="width:102px" %)176～191\|(% style="width:185px" %)HSX1169.0～HSX1169.15\|(% style="width:191px" %)HSX1177.0～HSX1177.15
	1500	\|(% style="width:102px" %)192～207\|(% style="width:185px" %)HSX1170.0～HSX1170.15\|(% style="width:191px" %)HSX1178.0～HSX1178.15
	1501	\|(% style="width:102px" %)208～223\|(% style="width:185px" %)HSX1171.0～HSX1171.15\|(% style="width:191px" %)HSX1179.0～HSX1179.15
	1502	\|(% style="width:102px" %)224～239\|(% style="width:185px" %)HSX1172.0～HSX1172.15\|(% style="width:191px" %)HSX1180.0～HSX1180.15
	1503	\|(% style="width:102px" %)240～255\|(% style="width:185px" %)HSX1173.0～HSX1173.15\|(% style="width:191px" %)HSX1181.0～HSX1181.15
	1504	\|(% colspan="1" rowspan="16" style="width:135px" %)3\|(% style="width:102px" %)0～15\|(% style="width:185px" %)HSX582.0～HSX582.15\|(% style="width:191px" %)HSX590.0～HSX590.15
	1505	\|(% style="width:102px" %)16～31\|(% style="width:185px" %)HSX583.0～HSX583.15\|(% style="width:191px" %)HSX591.0～HSX591.15
	1506	\|(% style="width:102px" %)32～47\|(% style="width:185px" %)HSX584.0～HSX584.15\|(% style="width:191px" %)HSX592.0～HSX592.15
	1507	\|(% style="width:102px" %)48～63\|(% style="width:185px" %)HSX585.0～HSX585.15\|(% style="width:191px" %)HSX593.0～HSX593.15
	1508	\|(% style="width:102px" %)64～79\|(% style="width:185px" %)HSX586.0～HSX586.15\|(% style="width:191px" %)HSX594.0～HSX594.15
	1509	\|(% style="width:102px" %)80～95\|(% style="width:185px" %)HSX587.0～HSX587.15\|(% style="width:191px" %)HSX595.0～HSX595.15
	1510	\|(% style="width:102px" %)96～111\|(% style="width:185px" %)HSX588.0～HSX588.15\|(% style="width:191px" %)HSX596.0～HSX596.15
	1511	\|(% style="width:102px" %)112～127\|(% style="width:185px" %)HSX589.0～HSX589.15\|(% style="width:191px" %)HSX597.0～HSX597.15
	1512	\|(% style="width:102px" %)128～143\|(% style="width:185px" %)HSX1182.0～HSX1182.15\|(% style="width:191px" %)HSX1190.0～HSX1190.15
	1513	\|(% style="width:102px" %)144～159\|(% style="width:185px" %)HSX1183.0～HSX1183.15\|(% style="width:191px" %)HSX1191.0～HSX1191.15
	1514	\|(% style="width:102px" %)160～175\|(% style="width:185px" %)HSX1184.0～HSX1184.15\|(% style="width:191px" %)HSX1192.0～HSX1192.15
	1515	\|(% style="width:102px" %)176～191\|(% style="width:185px" %)HSX1185.0～HSX1185.15\|(% style="width:191px" %)HSX1193.0～HSX1193.15
	1516	\|(% style="width:102px" %)192～207\|(% style="width:185px" %)HSX1186.0～HSX1186.15\|(% style="width:191px" %)HSX1194.0～HSX1194.15
	1517	\|(% style="width:102px" %)208～223\|(% style="width:185px" %)HSX1187.0～HSX1187.15\|(% style="width:191px" %)HSX1195.0～HSX1195.15
	1518	\|(% style="width:102px" %)224～239\|(% style="width:185px" %)HSX1188.0～HSX1188.15\|(% style="width:191px" %)HSX1196.0～HSX1196.15
	1519	\|(% style="width:102px" %)240～255\|(% style="width:185px" %)HSX1189.0～HSX1189.15\|(% style="width:191px" %)HSX1197.0～HSX1197.15
	1520	\|(% colspan="1" rowspan="16" style="width:135px" %)4\|(% style="width:102px" %)0～15\|(% style="width:185px" %)HSX598.0～HSX598.15\|(% style="width:191px" %)HSX606.0～HSX606.15
	1521	\|(% style="width:102px" %)16～31\|(% style="width:185px" %)HSX599.0～HSX599.15\|(% style="width:191px" %)HSX607.0～HSX607.15
	1522	\|(% style="width:102px" %)32～47\|(% style="width:185px" %)HSX600.0～HSX600.15\|(% style="width:191px" %)HSX608.0～HSX608.15
	1523	\|(% style="width:102px" %)48～63\|(% style="width:185px" %)HSX601.0～HSX601.15\|(% style="width:191px" %)HSX609.0～HSX609.15
	1524	\|(% style="width:102px" %)64～79\|(% style="width:185px" %)HSX602.0～HSX602.15\|(% style="width:191px" %)HSX610.0～HSX610.15
	1525	\|(% style="width:102px" %)80～95\|(% style="width:185px" %)HSX603.0～HSX603.15\|(% style="width:191px" %)HSX611.0～HSX611.15
	1526	\|(% style="width:102px" %)96～111\|(% style="width:185px" %)HSX604.0～HSX604.15\|(% style="width:191px" %)HSX612.0～HSX612.15
	1527	\|(% style="width:102px" %)112～127\|(% style="width:185px" %)HSX605.0～HSX605.15\|(% style="width:191px" %)HSX613.0～HSX613.15
	1528	\|(% style="width:102px" %)128～143\|(% style="width:185px" %)HSX1198.0～HSX1198.15\|(% style="width:191px" %)HSX1206.0～HSX1206.15
	1529	\|(% style="width:102px" %)144～159\|(% style="width:185px" %)HSX1199.0～HSX1199.15\|(% style="width:191px" %)HSX1207.0～HSX1207.15
	1530	\|(% style="width:102px" %)160～175\|(% style="width:185px" %)HSX1200.0～HSX1200.15\|(% style="width:191px" %)HSX1208.0～HSX1208.15
	1531	\|(% style="width:102px" %)176～191\|(% style="width:185px" %)HSX1201.0～HSX1201.15\|(% style="width:191px" %)HSX1209.0～HSX1209.15
	1532	\|(% style="width:102px" %)192～207\|(% style="width:185px" %)HSX1202.0～HSX1202.15\|(% style="width:191px" %)HSX1210.0～HSX1210.15
	1533	\|(% style="width:102px" %)208～223\|(% style="width:185px" %)HSX1203.0～HSX1203.15\|(% style="width:191px" %)HSX1211.0～HSX1211.15
	1534	\|(% style="width:102px" %)224～239\|(% style="width:185px" %)HSX1204.0～HSX1204.15\|(% style="width:191px" %)HSX1212.0～HSX1212.15
	1535	\|(% style="width:102px" %)240～255\|(% style="width:185px" %)HSX1205.0～HSX1205.15\|(% style="width:191px" %)HSX1213.0～HSX1213.15
	1536	\|(% colspan="1" rowspan="16" style="width:135px" %)5\|(% style="width:102px" %)0～15\|(% style="width:185px" %)HSX614.0～HSX614.15\|(% style="width:191px" %)HSX622.0～HSX622.15
	1537	\|(% style="width:102px" %)16～31\|(% style="width:185px" %)HSX615.0～HSX615.15\|(% style="width:191px" %)HSX623.0～HSX623.15
	1538	\|(% style="width:102px" %)32～47\|(% style="width:185px" %)HSX616.0～HSX616.15\|(% style="width:191px" %)HSX624.0～HSX624.15
	1539	\|(% style="width:102px" %)48～63\|(% style="width:185px" %)HSX617.0～HSX617.15\|(% style="width:191px" %)HSX625.0～HSX625.15
	1540	\|(% style="width:102px" %)64～79\|(% style="width:185px" %)HSX618.0～HSX618.15\|(% style="width:191px" %)HSX626.0～HSX626.15
	1541	\|(% style="width:102px" %)80～95\|(% style="width:185px" %)HSX619.0～HSX619.15\|(% style="width:191px" %)HSX627.0～HSX627.15
	1542	\|(% style="width:102px" %)96～111\|(% style="width:185px" %)HSX620.0～HSX620.15\|(% style="width:191px" %)HSX628.0～HSX628.15
	1543	\|(% style="width:102px" %)112～127\|(% style="width:185px" %)HSX621.0～HSX621.15\|(% style="width:191px" %)HSX629.0～HSX629.15
	1544	\|(% style="width:102px" %)128～143\|(% style="width:185px" %)HSX1214.0～HSX1214.15\|(% style="width:191px" %)HSX1222.0～HSX1222.15
	1545	\|(% style="width:102px" %)144～159\|(% style="width:185px" %)HSX1215.0～HSX1215.15\|(% style="width:191px" %)HSX1223.0～HSX1223.15
	1546	\|(% style="width:102px" %)160～175\|(% style="width:185px" %)HSX1216.0～HSX1216.15\|(% style="width:191px" %)HSX1224.0～HSX1224.15
	1547	\|(% style="width:102px" %)176～191\|(% style="width:185px" %)HSX1217.0～HSX1217.15\|(% style="width:191px" %)HSX1225.0～HSX1225.15
	1548	\|(% style="width:102px" %)192～207\|(% style="width:185px" %)HSX1218.0～HSX1218.15\|(% style="width:191px" %)HSX1226.0～HSX1226.15
	1549	\|(% style="width:102px" %)208～223\|(% style="width:185px" %)HSX1219.0～HSX1219.15\|(% style="width:191px" %)HSX1227.0～HSX1227.15
	1550	\|(% style="width:102px" %)224～239\|(% style="width:185px" %)HSX1220.0～HSX1220.15\|(% style="width:191px" %)HSX1228.0～HSX1228.15
	1551	\|(% style="width:102px" %)240～255\|(% style="width:185px" %)HSX1221.0～HSX1221.15\|(% style="width:191px" %)HSX1229.0～HSX1229.15
	1552	\|(% colspan="1" rowspan="16" style="width:135px" %)6\|(% style="width:102px" %)0～15\|(% style="width:185px" %)HSX630.0～HSX630.15\|(% style="width:191px" %)HSX638.0～HSX638.15
	1553	\|(% style="width:102px" %)16～31\|(% style="width:185px" %)HSX631.0～HSX631.15\|(% style="width:191px" %)HSX639.0～HSX639.15
	1554	\|(% style="width:102px" %)32～47\|(% style="width:185px" %)HSX632.0～HSX632.15\|(% style="width:191px" %)HSX640.0～HSX640.15
	1555	\|(% style="width:102px" %)48～63\|(% style="width:185px" %)HSX633.0～HSX633.15\|(% style="width:191px" %)HSX641.0～HSX641.15
	1556	\|(% style="width:102px" %)64～79\|(% style="width:185px" %)HSX634.0～HSX634.15\|(% style="width:191px" %)HSX642.0～HSX642.15
	1557	\|(% style="width:102px" %)80～95\|(% style="width:185px" %)HSX635.0～HSX635.15\|(% style="width:191px" %)HSX643.0～HSX643.15
	1558	\|(% style="width:102px" %)96～111\|(% style="width:185px" %)HSX636.0～HSX636.15\|(% style="width:191px" %)HSX644.0～HSX644.15
	1559	\|(% style="width:102px" %)112～127\|(% style="width:185px" %)HSX637.0～HSX637.15\|(% style="width:191px" %)HSX645.0～HSX645.15
	1560	\|(% style="width:102px" %)128～143\|(% style="width:185px" %)HSX1230.0～HSX1230.15\|(% style="width:191px" %)HSX1238.0～HSX1238.15
	1561	\|(% style="width:102px" %)144～159\|(% style="width:185px" %)HSX1231.0～HSX1231.15\|(% style="width:191px" %)HSX1239.0～HSX1239.15
	1562	\|(% style="width:102px" %)160～175\|(% style="width:185px" %)HSX1232.0～HSX1232.15\|(% style="width:191px" %)HSX1240.0～HSX1240.15
	1563	\|(% style="width:102px" %)176～191\|(% style="width:185px" %)HSX1233.0～HSX1233.15\|(% style="width:191px" %)HSX1241.0～HSX1241.15
	1564	\|(% style="width:102px" %)192～207\|(% style="width:185px" %)HSX1234.0～HSX1234.15\|(% style="width:191px" %)HSX1242.0～HSX1242.15
	1565	\|(% style="width:102px" %)208～223\|(% style="width:185px" %)HSX1235.0～HSX1235.15\|(% style="width:191px" %)HSX1243.0～HSX1243.15
	1566	\|(% style="width:102px" %)224～239\|(% style="width:185px" %)HSX1236.0～HSX1236.15\|(% style="width:191px" %)HSX1244.0～HSX1244.15
	1567	\|(% style="width:102px" %)240～255\|(% style="width:185px" %)HSX1237.0～HSX1237.15\|(% style="width:191px" %)HSX1245.0～HSX1245.15
	1568	\|(% colspan="1" rowspan="16" style="width:135px" %)7\|(% style="width:102px" %)0～15\|(% style="width:185px" %)HSX646.0～HSX646.15\|(% style="width:191px" %)HSX654.0～HSX654.15
	1569	\|(% style="width:102px" %)16～31\|(% style="width:185px" %)HSX647.0～HSX647.15\|(% style="width:191px" %)HSX655.0～HSX655.15
	1570	\|(% style="width:102px" %)32～47\|(% style="width:185px" %)HSX648.0～HSX648.15\|(% style="width:191px" %)HSX656.0～HSX656.15
	1571	\|(% style="width:102px" %)48～63\|(% style="width:185px" %)HSX649.0～HSX649.15\|(% style="width:191px" %)HSX657.0～HSX657.15
	1572	\|(% style="width:102px" %)64～79\|(% style="width:185px" %)HSX650.0～HSX650.15\|(% style="width:191px" %)HSX658.0～HSX658.15
	1573	\|(% style="width:102px" %)80～95\|(% style="width:185px" %)HSX651.0～HSX651.15\|(% style="width:191px" %)HSX659.0～HSX659.15
	1574	\|(% style="width:102px" %)96～111\|(% style="width:185px" %)HSX652.0～HSX652.15\|(% style="width:191px" %)HSX660.0～HSX660.15
	1575	\|(% style="width:102px" %)112～127\|(% style="width:185px" %)HSX653.0～HSX653.15\|(% style="width:191px" %)HSX661.0～HSX661.15
	1576	\|(% style="width:102px" %)128～143\|(% style="width:185px" %)HSX1246.0～HSX1246.15\|(% style="width:191px" %)HSX1254.0～HSX1254.15
	1577	\|(% style="width:102px" %)144～159\|(% style="width:185px" %)HSX1247.0～HSX1247.15\|(% style="width:191px" %)HSX1255.0～HSX1255.15
	1578	\|(% style="width:102px" %)160～175\|(% style="width:185px" %)HSX1248.0～HSX1248.15\|(% style="width:191px" %)HSX1256.0～HSX1256.15
	1579	\|(% style="width:102px" %)176～191\|(% style="width:185px" %)HSX1249.0～HSX1249.15\|(% style="width:191px" %)HSX1257.0～HSX1257.15
	1580	\|(% style="width:102px" %)192～207\|(% style="width:185px" %)HSX1250.0～HSX1250.15\|(% style="width:191px" %)HSX1258.0～HSX1258.15
	1581	\|(% style="width:102px" %)208～223\|(% style="width:185px" %)HSX1251.0～HSX1251.15\|(% style="width:191px" %)HSX1259.0～HSX1259.15
	1582	\|(% style="width:102px" %)224～239\|(% style="width:185px" %)HSX1252.0～HSX1252.15\|(% style="width:191px" %)HSX1260.0～HSX1260.15
	1583	\|(% style="width:102px" %)240～255\|(% style="width:185px" %)HSX1253.0～HSX1253.15\|(% style="width:191px" %)HSX1261.0～HSX1261.15
	1584	\|(% colspan="1" rowspan="16" style="width:135px" %)8\|(% style="width:102px" %)0～15\|(% style="width:185px" %)HSX662.0～HSX662.15\|(% style="width:191px" %)HSX670.0～HSX670.15
	1585	\|(% style="width:102px" %)16～31\|(% style="width:185px" %)HSX663.0～HSX663.15\|(% style="width:191px" %)HSX671.0～HSX671.15
	1586	\|(% style="width:102px" %)32～47\|(% style="width:185px" %)HSX664.0～HSX664.15\|(% style="width:191px" %)HSX672.0～HSX672.15
	1587	\|(% style="width:102px" %)48～63\|(% style="width:185px" %)HSX665.0～HSX665.15\|(% style="width:191px" %)HSX673.0～HSX673.15
	1588	\|(% style="width:102px" %)64～79\|(% style="width:185px" %)HSX666.0～HSX666.15\|(% style="width:191px" %)HSX674.0～HSX674.15
	1589	\|(% style="width:102px" %)80～95\|(% style="width:185px" %)HSX667.0～HSX667.15\|(% style="width:191px" %)HSX675.0～HSX675.15
	1590	\|(% style="width:102px" %)96～111\|(% style="width:185px" %)HSX668.0～HSX668.15\|(% style="width:191px" %)HSX676.0～HSX676.15
	1591	\|(% style="width:102px" %)112～127\|(% style="width:185px" %)HSX669.0～HSX669.15\|(% style="width:191px" %)HSX677.0～HSX677.15
	1592	\|(% style="width:102px" %)128～143\|(% style="width:185px" %)HSX1262.0～HSX1262.15\|(% style="width:191px" %)HSX1270.0～HSX1270.15
	1593	\|(% style="width:102px" %)144～159\|(% style="width:185px" %)HSX1263.0～HSX1263.15\|(% style="width:191px" %)HSX1271.0～HSX1271.15
	1594	\|(% style="width:102px" %)160～175\|(% style="width:185px" %)HSX1264.0～HSX1264.15\|(% style="width:191px" %)HSX1272.0～HSX1272.15
	1595	\|(% style="width:102px" %)176～191\|(% style="width:185px" %)HSX1265.0～HSX1265.15\|(% style="width:191px" %)HSX1273.0～HSX1273.15
	1596	\|(% style="width:102px" %)192～207\|(% style="width:185px" %)HSX1266.0～HSX1266.15\|(% style="width:191px" %)HSX1274.0～HSX1274.15
	1597	\|(% style="width:102px" %)208～223\|(% style="width:185px" %)HSX1267.0～HSX1267.15\|(% style="width:191px" %)HSX1275.0～HSX1275.15
	1598	\|(% style="width:102px" %)224～239\|(% style="width:185px" %)HSX1268.0～HSX1268.15\|(% style="width:191px" %)HSX1276.0～HSX1276.15
	1599	\|(% style="width:102px" %)240～255\|(% style="width:185px" %)HSX1269.0～HSX1269.15\|(% style="width:191px" %)HSX1277.0～HSX1277.15
	1600	\|(% rowspan="4" style="width:135px" %)9\|(% style="width:102px" %)0~~15\|(% style="width:185px" %)HSX678.0~~678.15\|(% style="width:191px" %)HSX686.0~~686.15
	1601	\|(% style="width:102px" %)16~~31\|(% style="width:185px" %)HSX679.0~~679.15\|(% style="width:191px" %)HSX687.0~~687.15
	1602	\|(% style="width:102px" %)32~~47\|(% style="width:185px" %)HSX680.0~~680.15\|(% style="width:191px" %)HSX688.0~~688.15
	1603	\|(% style="width:102px" %)48~~63\|(% style="width:185px" %)HSX681.0~~681.15\|(% style="width:191px" %)HSX689.0~~689.15
	1604	\|(% rowspan="4" style="width:135px" %)10\|(% style="width:102px" %)0~~15\|(% style="width:185px" %)HSX694.0~~694.15\|(% style="width:191px" %)HSX702.0~~702.15
	1605	\|(% style="width:102px" %)16~~31\|(% style="width:185px" %)HSX695.0~~695.15\|(% style="width:191px" %)HSX703.0~~703.15
	1606	\|(% style="width:102px" %)32~~47\|(% style="width:185px" %)HSX696.0~~696.15\|(% style="width:191px" %)HSX704.0~~704.15
	1607	\|(% style="width:102px" %)48~~63\|(% style="width:185px" %)HSX697.0~~697.15\|(% style="width:191px" %)HSX705.0~~705.15
	1608	\|(% rowspan="4" style="width:135px" %)11\|(% style="width:102px" %)0~~15\|(% style="width:185px" %)HSX710.0~~710.15\|(% style="width:191px" %)HSX718.0~~718.15
	1609	\|(% style="width:102px" %)16~~31\|(% style="width:185px" %)HSX711.0~~711.15\|(% style="width:191px" %)HSX719.0~~719.15
	1610	\|(% style="width:102px" %)32~~47\|(% style="width:185px" %)HSX712.0~~712.15\|(% style="width:191px" %)HSX720.0~~720.15
	1611	\|(% style="width:102px" %)48~~63\|(% style="width:185px" %)HSX713.0~~713.15\|(% style="width:191px" %)HSX721.0~~721.15
	1612	\|(% rowspan="4" style="width:135px" %)12\|(% style="width:102px" %)0~~15\|(% style="width:185px" %)HSX726.0~~726.15\|(% style="width:191px" %)HSX734.0~~734.15
	1613	\|(% style="width:102px" %)16~~31\|(% style="width:185px" %)HSX727.0~~727.15\|(% style="width:191px" %)HSX735.0~~735.15
	1614	\|(% style="width:102px" %)32~~47\|(% style="width:185px" %)HSX728.0~~728.15\|(% style="width:191px" %)HSX736.0~~736.15
	1615	\|(% style="width:102px" %)48~~63\|(% style="width:185px" %)HSX729.0~~729.15\|(% style="width:191px" %)HSX737.0~~737.15
	1616	\|(% rowspan="4" style="width:135px" %)13\|(% style="width:102px" %)0~~15\|(% style="width:185px" %)HSX742.0~~742.15\|(% style="width:191px" %)HSX750.0~~750.15
	1617	\|(% style="width:102px" %)16~~31\|(% style="width:185px" %)HSX743.0~~743.15\|(% style="width:191px" %)HSX751.0~~751.15
	1618	\|(% style="width:102px" %)32~~47\|(% style="width:185px" %)HSX744.0~~744.15\|(% style="width:191px" %)HSX752.0~~752.15
	1619	\|(% style="width:102px" %)48~~63\|(% style="width:185px" %)HSX745.0~~745.15\|(% style="width:191px" %)HSX753.0~~753.15
	1620	\|(% rowspan="4" style="width:135px" %)14\|(% style="width:102px" %)0~~15\|(% style="width:185px" %)HSX758.0~~758.15\|(% style="width:191px" %)HSX766.0~~766.15
	1621	\|(% style="width:102px" %)16~~31\|(% style="width:185px" %)HSX759.0~~759.15\|(% style="width:191px" %)HSX767.0~~767.15
	1622	\|(% style="width:102px" %)32~~47\|(% style="width:185px" %)HSX760.0~~760.15\|(% style="width:191px" %)HSX768.0~~768.15
	1623	\|(% style="width:102px" %)48~~63\|(% style="width:185px" %)HSX761.0~~761.15\|(% style="width:191px" %)HSX769.0~~769.15
	1624	\|(% rowspan="4" style="width:135px" %)15\|(% style="width:102px" %)0~~15\|(% style="width:185px" %)HSX774.0~~774.15\|(% style="width:191px" %)HSX782.0~~782.15
	1625	\|(% style="width:102px" %)16~~31\|(% style="width:185px" %)HSX775.0~~775.15\|(% style="width:191px" %)HSX783.0~~783.15
	1626	\|(% style="width:102px" %)32~~47\|(% style="width:185px" %)HSX776.0~~776.15\|(% style="width:191px" %)HSX784.0~~784.15
	1627	\|(% style="width:102px" %)48~~63\|(% style="width:185px" %)HSX777.0~~777.15\|(% style="width:191px" %)HSX785.0~~785.15
	1628	\|(% rowspan="4" style="width:135px" %)16\|(% style="width:102px" %)0~~15\|(% style="width:185px" %)HSX790.0~~790.15\|(% style="width:191px" %)HSX798.0~~798.15
	1629	\|(% style="width:102px" %)16~~31\|(% style="width:185px" %)HSX791.0~~791.15\|(% style="width:191px" %)HSX799.0~~799.15
	1630	\|(% style="width:102px" %)32~~47\|(% style="width:185px" %)HSX792.0~~792.15\|(% style="width:191px" %)HSX800.0~~800.15
	1631	\|(% style="width:102px" %)48~~63\|(% style="width:185px" %)HSX793.0~~793.15\|(% style="width:191px" %)HSX801.0~~801.15

Wiki source code of 13 HMI Internal Registers

Navigation

Table of Contents