Wiki source code of 13 HMI Internal Registers

Version 5.3 by xingzhi lin on 2025/09/24 10:24

version	line-number	content
1.1	1	= Introduction =
	2
	3	HMI provide four types of HMI address for user. You can use them as temporary variables of the program. The use is consistent with the way access to the PLC register. You could also reference through the address, PIStudio provides three types of such memory.
	4
	5	*HSW, HDW, HUW, HAW are word address, HSX, HDX, HUX, HAX are bit address.
	6
	7	* System data area (HSW): A special register defined by the system.
	8	* Data storage area (HDW/HDX): Users store user data.
	9	* System data area (HUW): A special register defined by the system.
	10	* System Data (HAW): System register used for power-off save.
	11	* Recipe index area (RPW): System register used for recipe index.
	12
	13	HMI internal registers are divided into bit address and word address, which can be accessed in two ways (take HDW as an example).
	14
	15	* Access as word with the prefix "HDW".
	16	** HDW0 means the 1st word of system data area. HDW1 means the 2nd word of system data area.
	17	* Access as bit with the prefix "HDX". The number before "." i". The number before Access in bit with the prefix "HD". The number before Access in bit with the prefix "HDX". The number before "." indicates the number of the word. The number after "." indicates the bit number of the word.
	18	** HDX1020.12 means to access the system data area in bit mode, the specific location is the 13th bit of the 1020 word.
	19
	20	(% class="box infomessage" %)
	21	(((
	22	✎Note:
	23
	24	* Addresses in HDX are the bits from words in HDW, so be careful when using addresses. For example, HDX1020.12 is the 13th bit to access the 1020 word. The value of this bit is the same as that of the word accessed through HDW001020. The 13th bit of this word is actually the same bit as HDX1020.12.
	25	* The address of the bit address HDX is with a decimal point while word addresses are integers.
	26	)))
	27
	28	= Address ranges table =
	29
	30	(% style="text-align:center" %)
	31	[[image:6.png]]
	32
	33	= Data storage area (HDW/HDX) =
	34
	35	It is used to save the temporary data of project.
	36
	37	1. Access as word, and serial number range is from HDW0 to HDW299999.
	38	1. Access as bit, and serial number range is from HDX0.0 to HDX299999.15.
	39
	40	= Power-down save area (HAW/HAX) =
	41
	42	It is system registers used for power-off save.
	43
	44	1. Access as word, and serial number range is from HAW0 to HAW199999.
	45	1. Access as bit, and serial number range is from HAX0.0 to HAX199999.15.
	46
	47	(% class="box infomessage" %)
	48	(((
	49	✎Note:
	50
	51	* HAW/HAX is power-down retention. The register of this type is able to save the data before the power-down.
	52	* To avoid possible device failure, do not immediately power off and reboot when configuring the power-down save addre
	53	)))
	54
	55	= Recipe index area (RPW) =
	56
	57	It is system recipe data power-off save register. The range is from RPW000000 to RPW990450.
	58
	59	(% class="box infomessage" %)
	60	(((
	61	✎Note:
	62
	63	* RPW is power-down retention. The register of this type is able to save the data before the power-down.
	64	* To avoid possible device failure, do not immediately power off and reboot when configuring the power-down save addre
	65	)))
	66
	67	= Single user data area (HUW/HUX) =
	68
	69	It is used for system special registers (reserved by system).
	70
	71	1. Access as word, and serial number range is from HUW0 to HUW1599.
	72	1. Access as bit, and serial number range is from HUX0.0 to HUX1599.15.
	73
	74	(% class="box infomessage" %)
	75	(((
	76	✎Note:
	77
	78	* HUW/HUX is a system special register, so please check the system special register list during use. Please use the address specified in the table and do not use the address which is not mentioned in the table.
	79	)))
	80
	81	(% class="table-bordered" %)
	82	\|=Special register address\|=Description\|=Function
	83	\|=HUW0\|Screen switch\|A single terminal controls the screen switching, and all terminals do not affect each other.
	84	\|=HUW110~~HUW119\|(% rowspan="26" %)Addresses of the built-in keyboard\|The T9 input method stores the selected seria number length
	85	\|=HUW120~~HUW129\|The T9 input method stores the selected Chinese Pinyin length
	86	\|=HUW135\|Input method: first input
	87	\|=HUW136\|Button: T9 Chinese Pinyin page
	88	\|=HUW137\|Button: T9 Chinese characters page
	89	\|=HUW138\|Button: symbol
	90	\|=HUW139\|Button: switch
	91	\|=HUW140\|Button: Chinese characters 1
	92	\|=HUW142\|Button: Chinese characters 2
	93	\|=HUW144\|Button: Chinese characters 3
	94	\|=HUW146\|Button: Chinese characters 4
	95	\|=HUW148\|Button: Chinese characters 5
	96	\|=HUW150\|Button: Chinese characters 6
	97	\|=HUW152\|Button: Chinese characters 7
	98	\|=HUW154\|Button: Chinese characters 8
	99	\|=HUW156\|Button: Chinese characters 9
	100	\|=HUW158\|Button: Chinese characters 10
	101	\|=HUW160~~HUW169\|Button: Chinese Pinyin 1
	102	\|=HUW170~~HUW179\|Button: Chinese Pinyin 2
	103	\|=HUW180~~HUW189\|Button: Chinese Pinyin 3
	104	\|=HUW190~~HUW199\|Button: Chinese Pinyin 4
	105	\|=HUW200~~HUW699\|Input method cache length
	106	\|=HUW700~~HUW749\|Minimum value of the input method
	107	\|=HUW750~~HUW799\|Maximum value of the input method
	108	\|=HUW800\|Case switching of the input method
	109	\|=HUW801~~HUW900\|Input method format cache length
	110	\|=HUW1000\|(% rowspan="12" %)Addresses of user permission\|OK (Sign in)
	111	\|=HUW1001\|Result of operation
	112	\|=HUW1002~~1005\|Old password
	113	\|=HUW1006~~1009\|New password
	114	\|=HUW1010~~1013\|Confirm password
	115	\|=HUW1014~~1029\|New user name
	116	\|=HUW1030~~1157\|States information of user permission
	117	\|=HUW1158~~1335\|User name (Only or drop-down list object)
	118	\|=HUW1336~~1345\|User name description or note
	119	\|=HUW1347\|Hidden function configurations
	120	\|=HUW1348\|Permission settings
	121	\|=HUW1349\|Current user name
	122	\|=HUW1382\|User sign in way\|(((
	123	* 0: Select the user name from drop-down list object for signing in
	124	* 1: Enter the user name in Character Input/Display object for signing in (HUW1014)
	125	)))
	126	\|=HUW1400\|Time interval from last operation\|(((
	127	Shows how long the touch screen has not been clicked, in seconds. 32-bit unsigned integer
	128
	129	✎Note: Clicking by different users will only clear the corresponding register of the currently operating terminal, and the registers on other terminals (such as mobile phones, computers) will not be cleared.
	130	)))
	131	\|=HUW1402\|Keyboard note\|It saves the text information of the keyboard notes when clicking object(HUW1402-HUW1433)
	132	\|=HUW1436\|Current object level\|Indicate current object security level
5.2	133	\|=HUW1502\|Touch status prompt\|(((
	134	* 0: Not touching
	135	* 1: Touching
	136	)))
5.3	137	\|=HUW1503\|The current user's group prompt\|(((
	138	A bit represents one of the groups. The administrator is bit 0, group 0 is bit 1, and group 1 is bit 2 and so on.
1.1	139
5.3	140	For example:
	141
	142	* HUW1503.0=0 (administrator)
	143	* HUW1503.1=1 (group 0)
	144	* HUW1503.2=1 (group 1)
	145	* HUW1503.3=0 (group 2)
	146
	147	This means the current user has the permissions of groups 0 and 1, but not administrator or group 2.
	148	)))
	149
1.1	150	= Special data area (HSW/HSX) =
	151
	152	It is used for system special registers (reserved by system).
	153
	154	1. Access as word, and serial number range is from HSW0 to HSW49999. (HSW10000 to HSW19999 are the power-off storage areas)
	155	1. Access as bit, and serial number range is from HSX0.0 to HSX49999.15.
	156
	157	(% class="box infomessage" %)
	158	(((
	159	✎Note:
	160
	161	* HSW / HSX are a system special register, so please check the system special register list during use. Please use the address specified in the table and do not use the address which is not mentioned in the table.
	162	* To avoid possible device failure, do not immediately power off and reboot when configuring the power-down save address.
	163	)))
	164
2.1	165	(% class="table-bordered" style="margin-left:auto; margin-right:auto; width:1024px" %)
1.1	166	\|=(% scope="row" style="width: 160px;" %)Address\|=(% style="width: 282px;" %)Function\|=(% style="width: 452px;" %)Description
	167	\|=(% style="width: 160px;" %)HSW0\|(% style="width:282px" %)Language switch\|(% style="width:452px" %)Multiple language could be set in the project, HMI support maximum 8 languages. (Power-down save supported)
	168	\|=(% style="width: 160px;" %)HSW1\|(% style="width:282px" %)Beep frequency (Only valid in HMI V1.0 System)\|(% style="width:452px" %)Frequency range: 0~~4000
	169	\|=(% style="width: 160px;" %)HSW2\|(% style="width:282px" %)Beep volume (Only valid in HMI V1.0 System)\|(% style="width:452px" %)Volume range: 0~~80
	170	\|=(% style="width: 160px;" %)HSW3\|(% style="width:282px" %)Beep time\|(% style="width:452px" %)Unit: ms
	171	\|=(% style="width: 160px;" %)HSW4\|(% style="width:282px" %)Beep whether enable or not\|(% style="width:452px" %)(((
	172	* =0: Enable.
	173	* =1: Disable.
	174	)))
	175	\|=(% style="width: 160px;" %)HSW5\|(% style="width:282px" %)(((
	176	Alarm indicator
	177	)))\|(% style="width:452px" %)(((
	178	* =0: Currently no alarm or all alarms have been off.
	179	* =1: Currently alarm(s) still keep in on.
	180	)))
	181	\|=(% style="width: 160px;" %)HSW6~~HSW7\|(% style="width:282px" %)Number of alarms\|(% style="width:452px" %)The number of alarm (it also includes the records of alarm confirmed)
	182	\|=(% style="width: 160px;" %)HSW8\|(% style="width:282px" %)Number of unconfirmed history alarm\|(% style="width:452px" %)The number of unconfirmed history alarm
	183	\|=(% style="width: 160px;" %)HSW9\|(% style="width:282px" %)Time out prompt\|(% style="width:452px" %)(((
	184	* =0: Enable
	185	* =1: Disable
	186	)))
	187	\|=(% style="width: 160px;" %)HSW12\|(% style="width:282px" %)Screen swicth\|(% style="width:452px" %)(((
	188	* = 0: Only HSW control the screen switch, and the sreens of all users will switch.
	189	* = 1: Only HUW control the screen switch, and all users do not affect each other.
	190	)))
	191	\|=(% style="width: 160px;" %)HSW13\|(% style="width:282px" %)Screen switch register\|(% style="width:452px" %)Equal to different values, the screen jumps to the corresponding screen number of the screen.
	192	\|=(% style="width: 160px;" %)HSW24\|(% style="width:282px" %)Reboot HMI\|=(% style="width: 452px;" %)1: Reboot
	193	\|=(% style="width: 160px;" %)HSW28\|(% style="width:282px" %)Local time: year\|(% style="width:452px" %)Range: 0~~9999 (system reserved)
	194	\|=(% style="width: 160px;" %)HSW29\|(% style="width:282px" %)Local time: month\|(% style="width:452px" %)Range: 01~~12 (system reserved)
	195	\|=(% style="width: 160px;" %)HSW30\|(% style="width:282px" %)Local time: day\|(% style="width:452px" %)Range: 01~~31 (system reserved)
	196	\|=(% style="width: 160px;" %)HSW31\|(% style="width:282px" %)Local time: hour\|(% style="width:452px" %)Range: 0~~23 (system reserved)
	197	\|=(% style="width: 160px;" %)HSW32\|(% style="width:282px" %)Local time: minute\|(% style="width:452px" %)Range: 0~~59 (system reserved)
	198	\|=(% style="width: 160px;" %)HSW33\|(% style="width:282px" %)Local time: second\|(% style="width:452px" %)Range: 0~~59 (system reserved)
	199	\|=(% style="width: 160px;" %)HSW34\|(% style="width:282px" %)Local time: week\|(% style="width:452px" %)(((
	200	* =0: Sunday.
	201	* =1: Monday.
	202	* =2: Tuesday.
	203	* =3: Wednesday.
	204	* =4: Thursday.
	205	* =5: Friday.
	206	* =6: Saturday.
	207	)))
	208	\|=(% style="width: 160px;" %)HSW39\|(% style="width:282px" %)Beep type(Only valid in HMI V2.0 System)\|(% style="width:452px" %)Type range: 1-5, Default is 1.
	209	\|=(% style="width: 160px;" %)HSW134\|(% style="width:282px" %)(((
	210	Whether the Script is read through
	211
	212
	213	)))\|(% style="width:452px" %)(((
	214	(% class="box infomessage" %)
	215	(((
	216	✎Note: If want to read-only or write-only, please enable this settings.
	217	)))
	218
	219	* =0: Read from HMI cache(Default)
	220	* =1: Read from PLC directly
	221	)))
	222	\|=(% style="width: 160px;" %)HSW135\|(% style="width:282px" %)Confirm installment password\|(% style="width:452px" %)Confirm button for installment password
	223	\|=(% style="width: 160px;" %)HSW151\|(% style="width:282px" %)Installment due\|(% style="width:452px" %)Number of days to installment due
	224	\|=(% style="width: 160px;" %)HSW185~~200\|(% style="width:282px" %)Installment password\|(% style="width:452px" %)Enter installment password
	225	\|=(% style="width: 160px;" %)HSW242\|(% style="width:282px" %)(((
	226	Prompt result of recipe operation
	227
	228	* Upload: Data is written from address to file
	229	* Download: Data is written from a file to an address
	230	)))\|(% style="width:452px" %)(((
	231	* =1: Download recipe, start
	232	* =2: Download recipe, execution error
	233	* =3: Download recipe, files don't exist
	234	* =4: Download recipe, members don't exist
	235	* =5: Download recipe, groups don't exist
	236	* =6: Download recipe, success
	237	* =7: Upload recipe, start
	238	* =8: Upload recipe, execution error
	239	* =9: Upload recipe, files don't exist
	240	* =10: Upload recipe, members don't exist
	241	* =11: Upload recipe, groups don't exist
	242	* =12: Upload recipe, success
	243	* =13: Insert recipe, start
	244	* =14: Insert recipe, execution error
	245	* =15: Insert recipe, files don't exist
	246	* =16: Insert recipe, members don't exist
	247	* =17: Insert recipe, groups don't exist
	248	* =18: Insert recipe, success
	249	* =19: Delete recipe, start
	250	* =20: Delete recipe, execution error
	251	* =21: Delete recipe, files don't exist
	252	* =22: Delete recipe, members don't exist
	253	* =23: Delete recipe, groups don't exist
	254	* =24: Delete recipe, success
	255	* =25: Delete and sort recipe, start
	256	* =26: Delete recipe and sort, execution error
	257	* =27: Delete recipe and sort, files don't exist
	258	* =28: Delete recipe and sort, members don't exist
	259	* =29: Delete recipe and sort, groups don't exist
	260	* =30: Delete recipe and sort, success
	261	* =37: CSV recipe files import successfully
	262	* =38: CSV recipe files import failed.
	263	)))
	264	\|=(% style="width: 160px;" %)HSW243\|(% style="width:282px" %)Prompt result of recipe index\|(% style="width:452px" %)(((
	265	* =31: Recipe index, start
	266	* =32: Recipe index, execution error
	267	* =33: Recipe index, files don't exist
	268	* =34: Recipe index, members don't exist
	269	* =35: Recipe index, groups don't exist
	270	* =36: Recipe index, success
	271	)))
	272	\|=(% style="width: 160px;" %)HSW521\|(% style="width:282px" %)Delete graph and alarm record\|(% style="width:452px" %)(((
	273	* =0: No operation
	274	* =1: HSX521.0=1, delete all records.
	275	* =2: HSX521.1=1, delete all trend graph.
	276	* =4: HSX521.2=1, delete all alarms.
	277	* =16: HSX521.4=1, delete history XY plot.
	278	* =32: HSX521.5=1, delete data records in SD card or USB flash disk;(Please make a setting which is saved to USB flash disk or SD card in project setting).
	279	* =64: HSX521.6=1, delete alarms records in SD card or USB flash disk; (Please make a setting which is saved to USB flash disk or SD card in project setting).
	280	)))
	281	\|=(% style="width: 160px;" %)HSW522\|(% style="width:282px" %)Copy and paste the alarm/data files in flash to the USB flash disk\|(% style="width:452px" %)(((
	282	* =0: No operation
	283	* =1: HSX522.0=1, copy all record
	284	* =2: HSX522.2=1, copy history XY trend graph
	285	* =8: HSX522.3=1, copy alarm record
	286	* =32: HSX522.5=1, copy recipe
	287	)))
	288	\|=(% style="width: 160px;" %)HSW523\|(% style="width:282px" %)Copy and paste the alarm/data files in flash to the SD card\|(% style="width:452px" %)(((
	289	* =0: No operation
	290	* =1: HSX523.0=1, copy all record
	291	* =4: HSX523.2=1, copy history XY trend graph
	292	* =8: HSX523.3=1, copy alarm record
	293	)))
	294	\|=(% style="width: 160px;" %)HSW524\|(% style="width:282px" %)Copy and paste the alarm/data files in SD card to the USB flash disk\|(% style="width:452px" %)(((
	295	* =0: no operation
	296	* =4: HSX524.2=1, copy history XY trend graph
	297	* =8: HSX524.3=1, copy alarm record
	298	* =16: HSX524.4=1, copy history alarm record
	299	* =32: HSX524.5=1, copy data record
	300	)))
	301	\|=(% style="width: 160px;" %)HSW525\|(% style="width:282px" %)Copy and paste the alarm/data files in USB flash disk to SD card\|(% style="width:452px" %)(((
	302	* =0: no operation
	303	* =4: HSX525.2=1, copy history XY trend graph
	304	* =8: HSX525.3=1, copy alarm record
	305	* =16: HSX525.4=1, copy history alarm record
	306	* =32: HSX525.5= 1, copy data record
	307	)))
	308	\|=(% style="width: 160px;" %)HSW526\|(% style="width:282px" %)Delete file list\|(% style="width:452px" %)(((
	309	* =0: no operation
	310	* =1: HSX526.0=1, delete designated file
	311	* =2: HSX526.1=1, delete all files
	312	)))
	313	\|=(% style="width: 160px;" %)HSW527\|(% style="width:282px" %)Eject USB flash disk/SD card\|(% style="width:452px" %)(((
	314	* =0: No operation
	315	* =1: Eject USB flash disk
	316	* =2: Eject SD card
	317	)))
	318	\|=(% style="width: 160px;" %)HSW528\|(% style="width:282px" %)The state of USB flash disk\|(% style="width:452px" %)(((
	319	* =1: USB flash disk is detected
	320	* =2: Ejecting USB flash disk, please waiting…
	321	* =3: USB flash disk ejected
	322	)))
	323	\|=(% style="width: 160px;" %)HSW529\|(% style="width:282px" %)The state of SD card\|(% style="width:452px" %)(((
	324	* =1: SD card is detected
	325	* =2: Ejecting SD card, please waiting…
	326	* =3: SD card ejected
	327	)))
	328	\|=(% style="width: 160px;" %)HSW550~~849\|(% style="width:282px" %)Communication control\|(% style="width:452px" %)For communication control and communication lamp (please refer to "[[Communication control>>https://docs.we-con.com.cn/bin/view/PIStudio/13.HMI%20internal%20registers/#HCommunicationcontrol]]" sector for detailed)
	329	\|=(% style="width: 160px;" %)HSW850\|(% style="width:282px" %)(((
	330	Network state
	331
	332	(4G, WIFI and Ethernet)
	333	)))\|(% style="width:452px" %)(((
	334	In HMI V1.0
	335
	336	* =0: Network is disconnected.
	337	* =1: only LAN connected, and APP can't access HMI.
	338	* =2: WECON Cloud connected , APP and web could access HMI.
	339
	340	In HMI V2.0
	341
	342	* =0: Network is disconnected.
	343	* =1: Network is connected.
	344	)))
	345	\|=(% style="width: 160px;" %)HSW855\|(% style="width:282px" %)Backlight Control\|(% style="width:452px" %)(((
	346	* HSX855.0=1: turn on the backlight and reset automatically after being triggered.
	347	* HSX855.1=1: turn off the backlight and reset automatically after being triggered.
	348	)))
	349	\|=(% style="width: 160px;" %)HSW856\|(% style="width:282px" %)Whether to close the indirect screen when the current screen is switched to the other screen)\|(% style="width:452px" %)(((
	350	* =0: close the sub-screen, including the indirect screen;
	351	* =1: not to close.
	352	)))
	353	\|=(% style="width: 160px;" %)HSW857\|(% style="width:282px" %)Permission in remote access (web page, mobile APP, cloud platform, etc.)\|(% style="width:452px" %)(((
	354	* =0: users could switch the screen, control the switch and update data in remote access.
	355	* =1: users could only control function switch (only switch the screen), view data and switch state, but could not operate or update them.
	356	* =2: users could neither operate the screen switch, nor switch operation and data modification, only view. (The ig series and 8000/9000 series with -R after system upgrade)
	357	)))
	358	\|=(% style="width: 160px;" %)HSW860~~861\|(% style="width:282px" %)Data partition remaining space\|(% style="width:452px" %)Display the data partition remaining space, updated every minute, unit(kB)
	359	\|=(% style="width: 160px;" %)HSW880\|(% style="width:282px" %)Enable data partition remaining space\|(% style="width:452px" %)(((
	360	~=1, able to view the data partition remaining space from HSW860~~861.
	361
	362	~=Other value except 1, disable the viewing function.
	363	)))
	364	\|=(% style="width: 160px;" %)HSW881\|(% style="width:282px" %)Storage of Record files\|(% style="width:452px" %)(((
	365	It is used for controlling saving alarm/data record files to U disk / SD card.
	366
	367	* = 0: Save to storage.
	368	* = 1: Don't save to storage.
	369	)))
	370	\|=(% style="width: 160px;" %)HSW882\|(% style="width:282px" %)Storage device status\|(% style="width:452px" %)(((
	371	* HDX882.0=0 USB flash doesn't execute storage or storage finished.
	372	* HDX882.0=1 USB flash is reading data, don't remove USB flash.
	373	* HDX882.1=0 SD card doesn't execute storage or storage finished.
	374	* HDX882.1=1 SD card is reading data, don't remove SD card.
	375	)))
	376	\|=(% style="width: 160px;" %)HSW884\|(% style="width:282px" %)Enter the system network configuration interface\|(% style="width:452px" %)(((
	377	* = 0: Do not enter the network configuration interface
	378	* = 1: Enter the system network configuration interface.
	379	** ig series HMI only supports to enter the system interface
	380
	381	)))
	382	\|=(% style="width: 160px;" %)HSW885\|(% style="width:282px" %)When the control object hides the address is read failed (communication failure), set the display mode of the object\|(% style="width:452px" %)(((
	383	* = 0: displayed by object setting.
	384	* = 1: control address read failure, the address control of all objects is hidden, not displayed.
	385	* = 2: control address read failure, the address control of all objects is displayed, not hidden.
	386	)))
	387	\|=(% style="width: 160px;" %)HSW893\|(% style="width:282px" %)(((
	388	User Permission Control Address, same as HUW1000 feature, please refer to chapter "[[User Permission>>http://13.229.109.52:8080/wiki/pistudio/view/Helps/08.Basic%20Function/#HUserPermission]]"
	389
	390	✎Note: This address can only take effect when it is operated in the real HMI, and the operation is invalid on Web/App side.
	391	)))\|(% style="width:452px" %)(((
	392	* =1: User Log in
	393	* =2: Change User password
	394	* =3: User Log out
	395	* =4: New user
	396	* =5: Delete user
	397	* =6: Add user rights
	398	* =8: Add Hide features
	399	* =9: Delete Profile
	400	* =10: Export Profile
	401	* =11: Import profile
	402	* =12: Export log file
	403	* =13: Delete log file
	404	)))
	405	\|=(% style="width: 160px;" %)HSW900\|(% style="width:282px" %)Quick update frequency settings for objects\|(% style="width:452px" %)(((
	406	Valid when the object is enabled for "quick update". Default: 5.
	407
	408	Range: 1 (fastest) - 50 (slowest)
	409	)))
	410	\|=(% style="width: 160px;" %)HSW920\|(% style="width:282px" %)Static mode Maximum periods\|(% style="width:452px" %)Numeric Input/ Display (range: 0-12)
	411	\|=(% style="width: 160px;" %)HSW921 ~~ 924\|(% style="width:282px" %)Static mode Admin key\|(% style="width:452px" %)Character Input/ Display (length: 8)
	412	\|=(% style="width: 160px;" %)HSW925 ~~ 928\|(% style="width:282px" %)1^^st^^ period key (Static mode)\|(% style="width:452px" %)Character Input/ Display (length: 8)
	413	\|=(% style="width: 160px;" %)HSW929 ~~ 933\|(% style="width:282px" %)1^^st^^ expiry time (Static mode)\|(% style="width:452px" %)Numeric Input/ Display (YYYYMMDDHHMM)
	414	\|=(% style="width: 160px;" %)HSW935 ~~ 938\|(% style="width:282px" %)2^^nd^^ period key (Static mode)\|(% style="width:452px" %)Character Input/ Display (length: 8)
	415	\|=(% style="width: 160px;" %)HSW939 ~~ 943\|(% style="width:282px" %)2^^nd ^^expiry time (Static mode)\|(% style="width:452px" %)Numeric Input/ Display (YYYYMMDDHHMM)
	416	\|=(% style="width: 160px;" %)HSW945 ~~ 948\|(% style="width:282px" %)3^^rd^^ period key (Static mode)\|(% style="width:452px" %)Character Input/ Display (length: 8)
	417	\|=(% style="width: 160px;" %)HSW949 ~~ 953\|(% style="width:282px" %)3^^rd ^^expiry time (Static mode)\|(% style="width:452px" %)Numeric Input/ Display (YYYYMMDDHHMM)
	418	\|=(% style="width: 160px;" %)HSW955 ~~ 958\|(% style="width:282px" %)4^^th^^ period key (Static mode)\|(% style="width:452px" %)Character Input/ Display (length: 8)
	419	\|=(% style="width: 160px;" %)HSW959 ~~ 963\|(% style="width:282px" %)4^^th ^^expiry time (Static mode)\|(% style="width:452px" %)Numeric Input/ Display (YYYYMMDDHHMM)
	420	\|=(% style="width: 160px;" %)HSW965 ~~ 968\|(% style="width:282px" %)5^^th^^ period key (Static mode)\|(% style="width:452px" %)Character Input/ Display (length: 8)
	421	\|=(% style="width: 160px;" %)HSW969 ~~ 973\|(% style="width:282px" %)5^^th ^^expiry time (Static mode)\|(% style="width:452px" %)Numeric Input/ Display (YYYYMMDDHHMM)
	422	\|=(% style="width: 160px;" %)HSW975 ~~ 978\|(% style="width:282px" %)6^^th^^ period key (Static mode)\|(% style="width:452px" %)Character Input/ Display (length: 8)
	423	\|=(% style="width: 160px;" %)HSW979 ~~ 983\|(% style="width:282px" %)6^^th ^^expiry time (Static mode)\|(% style="width:452px" %)Numeric Input/ Display (YYYYMMDDHHMM)
	424	\|=(% style="width: 160px;" %)HSW985 ~~ 988\|(% style="width:282px" %)7^^th^^ period key (Static mode)\|(% style="width:452px" %)Character Input/ Display (length: 8)
	425	\|=(% style="width: 160px;" %)HSW989 ~~ 993\|(% style="width:282px" %)7^^th ^^expiry time (Static mode)\|(% style="width:452px" %)Numeric Input/ Display (YYYYMMDDHHMM)
	426	\|=(% style="width: 160px;" %)HSW995 ~~ 998\|(% style="width:282px" %)8^^th^^ period key (Static mode)\|(% style="width:452px" %)Character Input/ Display (length: 8)
	427	\|=(% style="width: 160px;" %)HSW999 ~~ 1003\|(% style="width:282px" %)8^^th ^^expiry time (Static mode)\|(% style="width:452px" %)Numeric Input/ Display (YYYYMMDDHHMM)
	428	\|=(% style="width: 160px;" %)HSW1005 ~~1008\|(% style="width:282px" %)9^^th^^ period key (Static mode)\|(% style="width:452px" %)Character Input/ Display (length: 8)
	429	\|=(% style="width: 160px;" %)HSW1009 ~~ 1013\|(% style="width:282px" %)9^^th ^^expiry time (Static mode)\|(% style="width:452px" %)Numeric Input/ Display (YYYYMMDDHHMM)
	430	\|=(% style="width: 160px;" %)HSW1015 ~~1018\|(% style="width:282px" %)10^^th^^ period key (Static mode)\|(% style="width:452px" %)Character Input/ Display (length: 8)
	431	\|=(% style="width: 160px;" %)HSW1019 ~~ 1023\|(% style="width:282px" %)10^^th ^^expiry time (Static mode)\|(% style="width:452px" %)Numeric Input/ Display (YYYYMMDDHHMM)
	432	\|=(% style="width: 160px;" %)HSW1025 ~~1028\|(% style="width:282px" %)11^^th^^ period key (Static mode)\|(% style="width:452px" %)Character Input/ Display (length: 8)
	433	\|=(% style="width: 160px;" %)HSW1029 ~~ 1033\|(% style="width:282px" %)11^^th ^^expiry time (Static mode)\|(% style="width:452px" %)Numeric Input/ Display (YYYYMMDDHHMM)
	434	\|=(% style="width: 160px;" %)HSW1035 ~~1038\|(% style="width:282px" %)12^^th^^ period key (Static mode)\|(% style="width:452px" %)Character Input/ Display (length: 8)
	435	\|=(% style="width: 160px;" %)HSW1039 ~~ 1043\|(% style="width:282px" %)12^^th ^^expiry time (Static mode)\|(% style="width:452px" %)Numeric Input/ Display (YYYYMMDDHHMM)
	436	\|=(% style="width: 160px;" %)HSW1046\|(% style="width:282px" %)Current period (Static mode)\|(% style="width:452px" %)Current period (Range 1-13)
	437	\|=(% style="width: 160px;" %)HSW1047\|(% style="width:282px" %)Save settings (Static mode)\|(% style="width:452px" %)(((
	438	* HSX1047.0=1: Save static installment information
	439	* HSX1047.1=1: Write installment information to registers
	440	)))
	441	\|=(% style="width: 160px;" %)HSW1050~~HSW1065\|(% style="width:282px" %)The recipe name that can input csv format\|(% style="width:452px" %)Input CSV format recipe file name through "Character Input/ Display".(This function should be used in combination with the recipefunction)
	442	\|=(% style="width: 160px;" %)HSW1066\|(% style="width:282px" %)Configure the type of the CSV file imported\|(% style="width:452px" %)(((
	443	The CSV file type imported (This function should be used in combination with the recipe function)
	444
	445	* =0: Import customed CSV file. The data in the file is valid.
	446	* =1: Import ordinary recipe files of regular series HMI. The 1st row of the file is invalid.
	447	* =2: Import special recipe files of regular series HMI. The 1st and 3nd rows and the 1st colume of the file is invalid.
	448	)))
	449	\|=(% style="width: 160px;" %)HSW1067\|(% style="width:282px" %)Location where the CSV file is saved\|(% style="width:452px" %)(((
	450	Set the path of CSV file (This function should be used in combination with the recipe function)
	451
	452	* =0: In the CsvFile directory of the USB stick
	453	* =1: In the CsvFile directory of the SD card
	454	)))
	455	\|=(% style="width: 160px;" %)HSW1070\|(% style="width:282px" %)The time interval (seconds) since the last time the screen was clicked\|(% style="width:452px" %)(((
	456	Shows how long the current screen has not been clicked, using a decimal unsigned double word (Numeric Input/ Display).
	457
	458	(% class="box infomessage" %)
	459	(((
	460	✎Note: This register is cleared to zero regardless of which user clicks on the screen.
	461	)))
	462	)))
	463	\|=(% style="width: 160px;" %)HSW1073\|(% style="width:282px" %)Corresponding key value from keyboard\|(% style="width:452px" %)Display the key value of the currently pressed key, the key value is shown in Table 1 (not updated when the character input display is being input)
	464	\|=(% style="width: 160px;" %)HSW1074\|(% style="width:282px" %)Keyboard key status\|(% style="width:452px" %)Display the current button status (not updated when the numeric input display is being input)(((
	465	* =0: key release
	466	* =1: key press
	467	* =2: Long press the button
	468	)))
	469	\|=(% style="width: 160px;" %)HSW1075\|(% style="width:282px" %)Cursor speed\|(% style="width:452px" %)Control the cursor movement speed, the range is 0～100, the default is 20
	470	\|=(% style="width: 160px;" %)HSW1076\|(% style="width:282px" %)Cursor x coordinate value\|(% style="width:452px" %)Record the x value at the current position of the cursor, range: 0 to screen width -1
	471	\|=(% style="width: 160px;" %)HSW1077\|(% style="width:282px" %)Cursor y coordinate value\|(% style="width:452px" %)Record the y value at the current position of the cursor, range: 0 to screen height-1
	472	\|=(% style="width: 160px;" %)HSW1078\|(% style="width:282px" %)Corresponding ASCII code for keyboard keys\|(% style="width:452px" %)Only the ASCII value of letters, numbers, and symbols are displayed, and the ASCII value of the function button is not displayed.
	473	\|=(% style="width: 160px;" %)HSW1079\|(% style="width:282px" %)Trigger to set the cursor position and set the Enter key mode\|(% style="width:452px" %)(((
	474	* HSX1079.0=1: Set the cursor position according to the cursor xy register value;
	475	* HSX1079.1=0: When the numeric/character input display is being input, press Enter to end the input, no value/text part is being input, Enter is a normal click;
	476	* HSX1079.1=1 Regardless of whether the numeric/character component is inputting the Enter key, only normal click is performed, and the keyboard end input is not performed.
	477	)))
	478	\|=(% style="width: 160px;" %)HSW1083\|(% style="width:282px" %)Naming method for printing object screenshots\|(% style="width:452px" %)(((
	479	Example: The time is 2019-01-04 14:29:10 (523 milliseconds), the screen number is 0, and the object ID is 2.
	480
	481	* =0: Use year, month, day, hour, minute, second, millisecond, screen number, part number to name, such as: 2019010414291052302.bmp.
	482	* =1: Name using year, month, day, hour, minute, and second.
	483
	484	For example: 20190104142910.bmp.
	485	)))
	486	\|=(% style="width: 160px;" %)HSW1086\|(% style="width:282px" %)Control address mapping polling cycle, unit: ms\|(% style="width:452px" %)(((
	487	Address mapping polling cycle, effective range: 40~~1000ms, default: 300ms.
	488
	489	* When the set value is greater than 1000, the value is 1000.
	490	* When the set value is lower than 40, it changes to the default value 300
	491	)))
	492	\|=(% style="width: 160px;" %)HSW1087\|(% style="width:282px" %)Control write interval in address mapping\|(% style="width:452px" %)(((
	493	After reading data to the device for N times, Perform an address mapping write operation. N is the interval value. The effective range: 0~~5, and default is 2.
	494
	495	When N more than 5, it is 5.
	496
	497	0 is the fastest and 5 is the slowest.
	498	)))
	499	\|=(% style="width: 160px;" %)HSW1088\|(% style="width:282px" %)Control the write interval of script\|(% style="width:452px" %)(((
	500	After reading data to the device for N times, Perform a script write operation. N is the interval value. The effective range: 0~~5, and default is 2.
	501
	502	When N more than 5, it is 5.
	503
	504	0 is the fastest and 5 is the slowest.
	505	)))
	506	\|=(% style="width: 160px;" %)HSW1089\|(% style="width:282px" %)Control interval of read through\|(% style="width:452px" %)(((
	507	After reading data to the device for N times, Perform a read through operation. N is the interval value. The effective range: 0~~5, and default is 2.
	508
	509	When N more than 5, it is 5.
	510
	511	0 is the fastest and 5 is the slowest.
	512	)))
	513	\|=(% style="width: 160px;" %)HSW1100\|(% colspan="1" rowspan="4" style="width:282px" %)Set the Master IP for Multi-link\|(% style="width:452px" %)High word 1 for Master IP address of multi-link
	514	\|=(% style="width: 160px;" %)HSW1101\|(% style="width:452px" %)High word 2 for Master IP address of multi-link
	515	\|=(% style="width: 160px;" %)HSW1102\|(% style="width:452px" %)High word 3 for Master IP address of multi-link
	516	\|=(% style="width: 160px;" %)HSW1103\|(% style="width:452px" %)High word 4 for Master IP address of multi-link
	517	\|=(% style="width: 160px;" %)HSW1104\|(% style="width:282px" %)Control connection to Master or not for Multi-link slave device\|(% style="width:452px" %)(((
	518	* =1: Connect to the Master
	519	* =0: Do not connect to Master
	520	)))
	521	\|=(% style="width: 160px;" %)HSW1141\|(% style="width:282px" %)Release alarm\|(% style="width:452px" %)(((
	522	* =0, Default value
	523	* =1, Release the alarm generated before the last power-down when starting up
	524	)))
	525	\|=(% style="width: 160px;" %)HSW1200\|(% colspan="1" rowspan="2" style="width:282px" %)TSAP settings for HMI in the Siemens LOGO! 8 protocol(ig series or HMI V2.0)\|(% style="width:452px" %)HMI local TSAP, which corresponds to the remote TSAP of PLC
	526	\|=(% style="width: 160px;" %)HSW1201\|(% style="width:452px" %)HMI remote TSAP, which corresponds to the local TSAP of PLC
	527	\|=(% style="width: 160px;" %)HSW1450\|(% style="width:282px" %)Enable objects level password function\|(% style="width:452px" %)(((
	528	* =0, Disable
	529	* =1, Enable
	530	)))
	531	\|=(% style="width: 160px;" %)HSW1451\|(% style="width:282px" %)Whether the object level passwords are independent of each other\|(% style="width:452px" %)(((
	532	* =0, No, high-level passwords can unlock low-level
	533	* = 1, Yes, high-level passwords cannot unlock low-level
	534	)))
	535	\|=(% style="width: 160px;" %)HSW1452\|(% style="width:282px" %)Initialization level\|(% style="width:452px" %)Initialization level while HMI running
	536	\|=(% style="width: 160px;" %)HSW1454~~1457\|(% style="width:282px" %)Password for Level 1\|(% style="width:452px" %)(((
	537	Display password for level 1, using character input object, up to 8 characters (numbers, letters (case sensitive))
	538	)))
	539	\|=(% style="width: 160px;" %)HSW1458~~1461\|(% style="width:282px" %)Password for Level 2\|(% style="width:452px" %)Display password for level 2, using character input object, up to 8 characters (numbers, letters (case sensitive))
	540	\|=(% style="width: 160px;" %)HSW1462~~1465\|(% style="width:282px" %)Password for Level 3\|(% style="width:452px" %)Display password for level 3, using character input object, up to 8 characters (numbers, letters (case sensitive))
	541	\|=(% style="width: 160px;" %)HSW1466~~1469\|(% style="width:282px" %)Password for Level 4\|(% style="width:452px" %)Display password for level 4, using character input object, up to 8 characters (numbers, letters (case sensitive))
	542	\|=(% style="width: 160px;" %)HSW1470~~1473\|(% style="width:282px" %)Password for Level 5\|(% style="width:452px" %)Display password for level 5, using character input object, up to 8 characters (numbers, letters (case sensitive))
	543	\|=(% style="width: 160px;" %)HSW1474~~1477\|(% style="width:282px" %)Password for Level 6\|(% style="width:452px" %)Display password for level 6, using character input object, up to 8 characters (numbers, letters (case sensitive))
	544	\|=(% style="width: 160px;" %)HSW1478~~1481\|(% style="width:282px" %)Password for Level 7\|(% style="width:452px" %)Display password for level 7, using character input object, up to 8 characters (numbers, letters (case sensitive))
	545	\|=(% style="width: 160px;" %)HSW1482~~1485\|(% style="width:282px" %)Password for Level 8\|(% style="width:452px" %)Display password for level 8, using character input object, up to 8 characters (numbers, letters (case sensitive))
	546	\|=(% style="width: 160px;" %)HSW1486~~1489\|(% style="width:282px" %)Password for Level 9\|(% style="width:452px" %)Display password for level 9, using character input object, up to 8 characters (numbers, letters (case sensitive))
	547	\|=(% style="width: 160px;" %)HSW1490~~1493\|(% style="width:282px" %)Password for Level 10\|(% style="width:452px" %)Display password for level 10, using character input object, up to 8 characters (numbers, letters (case sensitive))
	548	\|=(% style="width: 160px;" %)HSW1494~~1497\|(% style="width:282px" %)Password for Level 11\|(% style="width:452px" %)Display password for level 11, using character input object, up to 8 characters (numbers, letters (case sensitive))
	549	\|=(% style="width: 160px;" %)HSW1498~~1501\|(% style="width:282px" %)Password for Level 12\|(% style="width:452px" %)Display password for level 12, using character input object, up to 8 characters (numbers, letters (case sensitive))
	550	\|=(% style="width: 160px;" %)HSW1502\|(% style="width:282px" %)Modify password for object level\|(% style="width:452px" %)(((
	551	* HSX1502.0=1: Modification comfirmed. Save the data of HSW1450~~HSW1501 to a file for immediate effect.
	552	* HSX1502.1=1:Modification cancelled. Restore the current data of hSW1450-HSW1501 to the data saved in the file last time.
	553	)))
	554	\|=(% style="width: 160px;" %)HSW1509\|(% style="width:282px" %)Curve width\|(% style="width:452px" %)(((
	555	* =0: Use the curve width set by project default.
	556	* =1 to 10: use special register to set curve width.
	557	)))
	558	\|=(% style="width: 160px;" %)HSW1603\|(% style="width:282px" %)Number of current unreleased alarms\|(% style="width:452px" %)The number of current unreleased alarms in alarm record file.
	559	\|=(% style="width: 160px;" %)HSW1604\|(% style="width:282px" %)The auxiliary judgment address when the control bit in the Object Lock fails to be read\|(% style="width:452px" %)(((
	560	* =0: The auxiliary address is invalid.
	561	* =1: When the communication fails, lock the object.
	562	* =2: When the communication fails, unlock the object.
	563	* =Others: The auxiliary address is invalid.
	564	)))
	565	\|=(% style="width: 160px;" %)HSW1605\|(% style="width:282px" %)BCD format natural decimal control\|(% style="width:452px" %)(((
	566	Whether to display natural decimals with decimal point in BCD format:
	567
	568	* 0=Not enabled.
	569	* 1=Enable.
	570
	571	(For example, 56.20 is displayed as 56.2, 33.00 is displayed as 33)
	572	)))
	573	\|=(% style="width: 160px;" %)HSW1606\|(% style="width:282px" %)User permission modification control\|(% style="width:452px" %)(((
	574	* =0: Ordinary users are allowed to modify permissions and other operations
	575	* =1: Only the administrator can operate (default is 0)
	576	)))
	577	\|=(% style="width: 160px;" %)HSW1607\|(% style="width:282px" %)The spacing value among the drop-down items of the drop-down list\|(% style="width:452px" %)10 to 50 is effective, such as: 23 is 2.3 times the height of the object.
	578	\|=(% style="width: 160px;" %)HSW1611\|(% style="width:282px" %)(((
	579	Traditional recipe transfer
	580	)))\|(% style="width:452px" %)(((
	581	* =1: download traditional recipe.
	582	* =2: upload the traditional recipe.
	583	)))
	584	\|=(% style="width: 160px;" %)HSW1612\|(% style="width:282px" %)Traditional Recipe group number\|(% style="width:452px" %)Traditional Recipe group number
	585	\|=(% style="width: 160px;" %)HSW1613\|(% style="width:282px" %)Display the status of network card\|(% style="width:452px" %)(((
	586	* =1: Normal
	587	* =Others: Abnormal
	588	)))
	589	\|=(% style="width: 160px;" %)HSW1614~~1623\|(% style="width:282px" %)Download speed per second\|(% style="width:452px" %)Display the download speed per second. (The value is string)
	590	\|=(% style="width: 160px;" %)HSW1624~~1633\|(% style="width:282px" %)Upnload speed per second\|(% style="width:452px" %)Display the upload speed per second. (The value is string)
	591	\|=(% style="width: 160px;" %)HSW1634~~1643\|(% style="width:282px" %)Flow consumption rate\|(% style="width:452px" %)Display the total flow rate per second (The value is string)
	592	\|=(% style="width: 160px;" %)HSW1644~~1653\|(% style="width:282px" %)Download flow consumption after power on\|(% style="width:452px" %)Display the download flow consumption after power on (The value is string)
	593	\|=(% style="width: 160px;" %)HSW1654~~1663\|(% style="width:282px" %)Upload flow consumption after power on\|(% style="width:452px" %)Display the upload flow consumption after power on (The value is string)
	594	\|=(% style="width: 160px;" %)HSW1664~~1673\|(% style="width:282px" %)Total flow consumption after power on\|(% style="width:452px" %)Display the total flow consumption after power on (download and upload). (The value is string)
	595	\|=(% style="width: 160px;" %)HSW1674~~1683\|(% style="width:282px" %)Historical flow consumption\|(% style="width:452px" %)Display historical flow consumption (download and upload). (The value is string)
	596	\|=(% style="width: 160px;" %)HSW1684~~1693\|(% style="width:282px" %)Flow consumption in 10 minutes\|(% style="width:452px" %)Flow consumption in 10 minutes (download and upload). (The value is string)
	597	\|=(% style="width: 160px;" %)HSW1694~~1703\|(% style="width:282px" %)Flow consumption in 30 minutes\|(% style="width:452px" %)Flow consumption in 30 minutes (download and upload). (The value is string)
	598	\|=(% style="width: 160px;" %)HSW1704~~1713\|(% style="width:282px" %)Flow consumption in 3 hours\|(% style="width:452px" %)Flow consumption in 3 hours (download and upload). (The value is string)
	599	\|=(% style="width: 160px;" %)HSW1715\|(% style="width:282px" %)Reset flow\|(% style="width:452px" %)(((
	600	* =1: Clear historical flow data and restart the count.
	601	* =Others: Invalid
	602	)))
	603	\|=(% style="width: 160px;" %)HSW1719\|(% style="width:282px" %)Network status of Ethernet connnecting to server\|(% style="width:452px" %)(((
	604	* =0: Server connection exception
	605	* =1: Server connection is OK
	606	)))
	607	\|=(% style="width: 160px;" %)HSW1720\|(% colspan="1" rowspan="12" style="width:282px" %)Related IP register in WIFI network status (It is valid when HMI is connected to WIFI)\|(% style="width:452px" %)Local IP address high byte 1
	608	\|=(% style="width: 160px;" %)HSW1721\|(% style="width:452px" %)Local IP address high byte 2
	609	\|=(% style="width: 160px;" %)HSW1722\|(% style="width:452px" %)Local IP address high byte 3
	610	\|=(% style="width: 160px;" %)HSW1723\|(% style="width:452px" %)Local IP address high byte 4
	611	\|=(% style="width: 160px;" %)HSW1724\|(% style="width:452px" %)Local mask IP address high byte 1
	612	\|=(% style="width: 160px;" %)HSW1725\|(% style="width:452px" %)Local mask IP address high byte 2
	613	\|=(% style="width: 160px;" %)HSW1726\|(% style="width:452px" %)Local mask IP address high byte 3
	614	\|=(% style="width: 160px;" %)HSW1727\|(% style="width:452px" %)Local mask IP address high byte 4
	615	\|=(% style="width: 160px;" %)HSW1728\|(% style="width:452px" %)Local gateway IP address high byte 1
	616	\|=(% style="width: 160px;" %)HSW1729\|(% style="width:452px" %)Local gateway IP address high byte 2
	617	\|=(% style="width: 160px;" %)HSW1730\|(% style="width:452px" %)Local gateway IP address high byte 3
	618	\|=(% style="width: 160px;" %)HSW1731\|(% style="width:452px" %)Local gateway IP address high byte 4
	619	\|=(% style="width: 160px;" %)HSW1733\|(% colspan="1" rowspan="6" style="width:282px" %)(((
	620	Display the MAC code of current WIFI
	621
	622	(display in hexadecimal)
	623	)))\|(% style="width:452px" %)Local MAC address high byte 1 (hexadecimal)
	624	\|=(% style="width: 160px;" %)HSW1734\|(% style="width:452px" %)Local MAC address high byte 2 (hexadecimal)
	625	\|=(% style="width: 160px;" %)HSW1735\|(% style="width:452px" %)Local MAC address high byte 3 (hexadecimal)
	626	\|=(% style="width: 160px;" %)HSW1736\|(% style="width:452px" %)Local MAC address high byte 4 (hexadecimal)
	627	\|=(% style="width: 160px;" %)HSW1737\|(% style="width:452px" %)Local MAC address high byte 5 (hexadecimal)
	628	\|=(% style="width: 160px;" %)HSW1738\|(% style="width:452px" %)Local MAC address high byte 6 (hexadecimal)
	629	\|=(% style="width: 160px;" %)HSW1739\|(% style="width:282px" %)Display the network status of WIFI\|(% style="width:452px" %)(((
	630	* =0: Server connection exception
	631	* =1: Server connection is OK
	632	)))
	633	\|=(% style="width: 160px;" %)HSW1740\|(% style="width:282px" %)Wi-fi signal strength\|(% style="width:452px" %)(((
	634	Display the value of Wi-fi signal signal strength, ranges from 0~~100 (Signal strength is automatically obtained only once when HMI is powered on, and it will not be automatically updated. It needs to be used with the HSW1890)
	635	)))
	636	\|=(% style="width: 160px;" %)HSW1741\|(% colspan="1" rowspan="12" style="width:282px" %)Related IP register in 4Gnetwork status (It is valid when HMI is connected to 4G)\|(% style="width:452px" %)Local IP address high byte 1
	637	\|=(% style="width: 160px;" %)HSW1742\|(% style="width:452px" %)Local IP address high byte 2
	638	\|=(% style="width: 160px;" %)HSW1743\|(% style="width:452px" %)Local IP address high byte 3
	639	\|=(% style="width: 160px;" %)HSW1744\|(% style="width:452px" %)Local IP address high byte 4
	640	\|=(% style="width: 160px;" %)HSW1745\|(% style="width:452px" %)Local mask IP address high byte 1
	641	\|=(% style="width: 160px;" %)HSW1746\|(% style="width:452px" %)Local mask IP address high byte 2
	642	\|=(% style="width: 160px;" %)HSW1747\|(% style="width:452px" %)Local mask IP address high byte 3
	643	\|=(% style="width: 160px;" %)HSW1748\|(% style="width:452px" %)Local mask IP address high byte 4
	644	\|=(% style="width: 160px;" %)HSW1749\|(% style="width:452px" %)Local gateway IP address high byte 1
	645	\|=(% style="width: 160px;" %)HSW1750\|(% style="width:452px" %)Local gateway IP address high byte 2
	646	\|=(% style="width: 160px;" %)HSW1751\|(% style="width:452px" %)Local gateway IP address high byte 3
	647	\|=(% style="width: 160px;" %)HSW1752\|(% style="width:452px" %)Local gateway IP address high byte 4
	648	\|=(% style="width: 160px;" %)HSW1754\|(% colspan="1" rowspan="6" style="width:282px" %)(((
	649	Display the MAC code of current WIFI
	650
	651	(display in hexadecimal)
	652	)))\|(% style="width:452px" %)Local MAC address high byte 1 (hexadecimal)
	653	\|=(% style="width: 160px;" %)HSW1755\|(% style="width:452px" %)Local MAC address high byte 2 (hexadecimal)
	654	\|=(% style="width: 160px;" %)HSW1756\|(% style="width:452px" %)Local MAC address high byte 3 (hexadecimal)
	655	\|=(% style="width: 160px;" %)HSW1757\|(% style="width:452px" %)Local MAC address high byte 4 (hexadecimal)
	656	\|=(% style="width: 160px;" %)HSW1758\|(% style="width:452px" %)Local MAC address high byte 5 (hexadecimal)
	657	\|=(% style="width: 160px;" %)HSW1759\|(% style="width:452px" %)Local MAC address high byte 6 (hexadecimal)
	658	\|=(% style="width: 160px;" %)HSW1760\|(% style="width:282px" %)Display 4G network status\|(% style="width:452px" %)(((
	659	* =0: Server connection exception
	660	* =1: Server connection is OK
	661	)))
	662	\|=(% style="width: 160px;" %)HSW1761\|(% style="width:282px" %)Display 4G network signal strength\|(% style="width:452px" %)Signal strength: 0~~31. The greater the value ,the signal is stronger
	663	\|=(% style="width: 160px;" %)(((
	664	HSW1762
	665	)))\|(% colspan="1" rowspan="13" style="width:282px" %)(((
	666	Note: Valid when Ethernet2 of HMI is plugged into the network cable.
	667	①、When the Ethernet setting is enabled in the project parameters, this register displays the set value.
	668	②. When the Ethernet setting is not enabled in the engineering parameters, the register displays the Ethernet IP automatically acquired by the HMI.
	669	③. When the HMI is not plugged into the network cable, the register will show 0 whether the engineering parameters are set or not.
	670	④.IP related registers can be read and written (only static IP mode can be written).
	671	)))\|(% style="width:452px" %)(((
	672	Ethernet2 Local IP address high byte 1
	673	)))
	674	\|=(% style="width: 160px;" %)(((
	675	HSW1763
	676	)))\|(% style="width:452px" %)(((
	677	Ethernet2 Local IP address high byte 2
	678	)))
	679	\|=(% style="width: 160px;" %)(((
	680	HSW1764
	681	)))\|(% style="width:452px" %)(((
	682	Ethernet2 Local IP address high byte 3
	683	)))
	684	\|=(% style="width: 160px;" %)(((
	685	HSW1765
	686	)))\|(% style="width:452px" %)(((
	687	Ethernet2 Local IP address high byte 4
	688	)))
	689	\|=(% style="width: 160px;" %)(((
	690	HSW1766
	691	)))\|(% style="width:452px" %)(((
	692	Ethernet2 Local mask IP address high byte 1
	693	)))
	694	\|=(% style="width: 160px;" %)(((
	695	HSW1767
	696	)))\|(% style="width:452px" %)(((
	697	Ethernet2 Local mask IP address high byte 2
	698	)))
	699	\|=(% style="width: 160px;" %)(((
	700	HSW1768
	701	)))\|(% style="width:452px" %)Ethernet2 Local mask IP address high byte 3
	702	\|=(% style="width: 160px;" %)HSW1769\|(% style="width:452px" %)Ethernet2 Local mask IP address high byte 4
	703	\|=(% style="width: 160px;" %)(((
	704	HSW1770
	705	)))\|(% style="width:452px" %)(((
	706	Ethernet2 Local gateway IP address high byte 1
	707	)))
	708	\|=(% style="width: 160px;" %)(((
	709	HSW1771
	710	)))\|(% style="width:452px" %)(((
	711	Ethernet2 Local gateway IP address high byte 2
	712	)))
	713	\|=(% style="width: 160px;" %)(((
	714	HSW1772
	715	)))\|(% style="width:452px" %)(((
	716	Ethernet2 Local gateway IP address high byte 3
	717	)))
	718	\|=(% style="width: 160px;" %)(((
	719	HSW1773
	720	)))\|(% style="width:452px" %)(((
	721	Ethernet2 Local gateway IP address high byte 4
	722	)))
	723	\|=(% style="width: 160px;" %)(((
	724	HSW1774
	725	)))\|(% style="width:452px" %)(((
	726	Ethernet2 Local Port Address
	727	)))
	728	\|=(% style="width: 160px;" %)(((
	729	HSW1775
	730	)))\|(% colspan="1" rowspan="6" style="width:282px" %)(((
	731	①Display the MAC code of Ethernet2 NIC
	732
	733	(hexadecimal display)
	734
	735	②Read-only mode, not modifiable
	736	)))\|(% style="width:452px" %)(((
	737	Ethernet2 Local MAC code high byte 1
	738	)))
	739	\|=(% style="width: 160px;" %)(((
	740	HSW1776
	741	)))\|(% style="width:452px" %)(((
	742	Ethernet2 Local MAC code high byte 2
	743	)))
	744	\|=(% style="width: 160px;" %)(((
	745	HSW1777
	746	)))\|(% style="width:452px" %)(((
	747	Ethernet2 Local MAC code high byte 3
	748	)))
	749	\|=(% style="width: 160px;" %)(((
	750	HSW1778
	751	)))\|(% style="width:452px" %)(((
	752	Ethernet2 Local MAC code high byte 4
	753	)))
	754	\|=(% style="width: 160px;" %)(((
	755	HSW1779
	756	)))\|(% style="width:452px" %)(((
	757	Ethernet2 Local MAC code high byte 5
	758	)))
	759	\|=(% style="width: 160px;" %)(((
	760	HSW1780
	761	)))\|(% style="width:452px" %)(((
	762	Ethernet2 Local MAC code high byte 6
	763	)))
	764	\|=(% style="width: 160px;" %)(((
	765	HSW1781
	766	)))\|(% colspan="1" rowspan="8" style="width:282px" %)(((
	767	①Display and modify DNS1 and DNS2 of Ethernet2
	768
	769	②Related registers can be read and written mode (only static IP mode can be written)
	770	)))\|(% style="width:452px" %)(((
	771	Ethernet2 Local DNS1 address high byte 1
	772	)))
	773	\|=(% style="width: 160px;" %)(((
	774	HSW1782
	775	)))\|(% style="width:452px" %)(((
	776	Ethernet2 Local DNS1 address high byte 2
	777	)))
	778	\|=(% style="width: 160px;" %)(((
	779	HSW1783
	780	)))\|(% style="width:452px" %)(((
	781	Ethernet2 Local DNS1 address high byte 3
	782	)))
	783	\|=(% style="width: 160px;" %)(((
	784	HSW1784
	785	)))\|(% style="width:452px" %)(((
	786	Ethernet2 Local DNS1 address high byte 4
	787	)))
	788	\|=(% style="width: 160px;" %)(((
	789	HSW1785
	790	)))\|(% style="width:452px" %)(((
	791	Ethernet2 Local DNS2 address high byte 1
	792	)))
	793	\|=(% style="width: 160px;" %)(((
	794	HSW1786
	795	)))\|(% style="width:452px" %)(((
	796	Ethernet2 Local DNS2 address high byte 2
	797	)))
	798	\|=(% style="width: 160px;" %)(((
	799	HSW1787
	800	)))\|(% style="width:452px" %)(((
	801	Ethernet2 Local DNS2 address high byte 3
	802	)))
	803	\|=(% style="width: 160px;" %)(((
	804	HSW1788
	805	)))\|(% style="width:452px" %)(((
	806	Ethernet2 Local DNS2 address high byte 4
	807	)))
	808	\|=(% style="width: 160px;" %)(((
	809	HSW1789
	810	)))\|(% colspan="1" style="width:282px" %)(((
	811	Display or set the dynamic or static IP mode of Ethernet2
	812	)))\|(% style="width:452px" %)(((
	813	HSX1789.0 = 0, Static IP mode
	814
	815	HSX1789.0 = 1, dynamic IP mode
	816	)))
	817	\|=(% style="width: 160px;" %)(((
	818	HSW1790
	819	)))\|(% colspan="1" style="width:282px" %)(((
	820	Confirm Ethernet2 IP, subnet mask, gateway, DNS1, DNS2, and dynamic static IP settings
	821	)))\|(% style="width:452px" %)(((
	822	~= 1, confirm the setting (i.e., after modifying IP-related information, set this address to 1, representing confirmation of the modification, after which it will be reset to 0)
	823	)))
	824	\|=(% style="width: 160px;" %)(((
	825	HSW1791
	826	)))\|(% colspan="1" style="width:282px" %)(((
	827	Network status of the Ethernet2 connection server
	828	)))\|(% style="width:452px" %)(((
	829	~= 0, connection to the server is abnormal = 1, connection to the server is normal
	830	)))
	831	\|=(% style="width: 160px;" %)HSW1852\|(% style="width:282px" %)Control the interval in two consecutive clicks\|(% style="width:452px" %)Limit range: 1~~500ms. The default is 100 ms.
	832	\|=(% style="width: 160px;" %)HSW1853\|(% style="width:282px" %)File format for exporting data records to USB flash drive or SD card\|(% style="width:452px" %)(((
	833	* =0: db database
	834	* =1: CSV
	835
	836	(Only valid for script function DbToCsvFile)
	837	)))
	838	\|=(% style="width: 160px;" %)HSW1854\|(% style="width:282px" %)High and low word conversion type\|(% style="width:452px" %)(((
	839	* =0: use the old high-low word conversion (default)
	840	* =1: usie the new high-low word conversion
	841	)))
	842	\|=(% style="width: 160px;" %)HSW1855\|(% style="width:282px" %)Screen Lock prompt display control\|(% style="width:452px" %)(((
	843	Control whether the screen lock prompt is displayed,
	844
	845	* =0: display(default value)
	846	* =Other: no display.
	847	)))
	848	\|=(% style="width: 160px;" %)HSW1856\|(% style="width:282px" %)Display map fence drawing status\|(% style="width:452px" %)(((
	849	* =0: no map fence
	850	* =1: The map fence is drawn and the device is inside the fence
	851	* =2: The map fence is drawn and the device is outside the fence
	852	)))
	853	\|=(% style="width: 160px;" %)HSW1857\|(% style="width:282px" %)USB disk download \|(% style="width:452px" %)(((
	854	* =0: download project
	855	* =1: download firmware
	856	* =2: enter the background
	857	)))
	858	\|=(% style="width: 160px;" %)HSW1865\|(% style="width:282px" %)Priority connection to the cloud\|(% style="width:452px" %)(((
	859	* =0: priority Ethernet
	860	* =1: priority WLAN
	861	* =2: priority 4G
	862	)))
	863	\|=(% style="width: 160px;" %)HSW1866\|(% style="width:282px" %)Delete the Lua extension module file\|(% style="width:452px" %)(((
	864	* =0: delete;
	865	* = Others: do not delete
	866	)))
	867	\|=(% style="width: 160px;" %)HSW1867\|(% style="width:282px" %)Reset mode\|(% style="width:452px" %)(((
	868	Monitor address is set during reset of reset switch, whether to cancel reset,
	869
	870	* = 0: yes (default);
	871	* = 1: no
	872	)))
	873	\|=(% style="width: 160px;" %)HSW1868\|(% style="width:282px" %)Double-click or long press the record type table mode\|(% style="width:452px" %)(((
	874	Controls whether the button pops up when double-clicking or long pressing on record type table object
	875
	876	* = 0: yes (default);
	877	* = 1: no
	878	)))
	879	\|=(% style="width: 160px;" %)(((
	880	HSW1869
	881	)))\|(% style="width:282px" %)(((
	882	Dynamic screensaver countdown
	883	)))\|(% style="width:452px" %)(((
	884	Countdown to enter dynamic screensaver effect, unit (S)
	885	)))
	886	\|=(% style="width: 160px;" %)(((
	887	HSW1870
	888	)))\|(% style="width:282px" %)(((
	889	Display or set the dynamic or static IP mode of Ethernet1
	890	)))\|(% style="width:452px" %)(((
	891	HSX1870.0 = 0, Static IP mode
	892
	893	HSX1870.0 = 1, dynamic IP mode
	894	)))
	895	\|=(% style="width: 160px;" %)(((
	896	HSW1871
	897	)))\|(% style="width:282px" %)(((
	898	Confirm the IP, subnet mask, gateway, DNS1, DNS2, and dynamic static IP settings for Ethernet1
	899	)))\|(% style="width:452px" %)(((
	900	~= 1, confirm the setting (i.e., after modifying IP-related information, set this address to 1, representing confirmation of the modification, after which it will be reset to 0)
	901	)))
	902	\|=(% style="width: 160px;" %)(((
	903	HSW1872
	904	)))\|(% colspan="1" rowspan="8" style="width:282px" %)(((
	905	①Display and modify DNS1 and DNS2 of Ethernet1
	906
	907	②Related registers can be read and written mode (only static IP mode can be written)
	908	)))\|(% style="width:452px" %)(((
	909	Ethernet1 Local DNS1 address high byte 1
	910	)))
	911	\|=(% style="width: 160px;" %)(((
	912	HSW1873
	913	)))\|(% style="width:452px" %)Ethernet1 Local DNS1 address high byte 2
	914	\|=(% style="width: 160px;" %)(((
	915	HSW1874
	916	)))\|(% style="width:452px" %)Ethernet1 Local DNS1 address high byte 3
	917	\|=(% style="width: 160px;" %)(((
	918	HSW1875
	919	)))\|(% style="width:452px" %)Ethernet1 Local DNS1 address high byte 4
	920	\|=(% style="width: 160px;" %)(((
	921	HSW1876
	922	)))\|(% style="width:452px" %)Ethernet1 Local DNS2 address high byte 1
	923	\|=(% style="width: 160px;" %)(((
	924	HSW1877
	925	)))\|(% style="width:452px" %)Ethernet1 Local DNS2 address high byte 2
	926	\|=(% style="width: 160px;" %)(((
	927	HSW1878
	928	)))\|(% style="width:452px" %)Ethernet1 Local DNS2 address high byte 3
	929	\|=(% style="width: 160px;" %)(((
	930	HSW1879
	931	)))\|(% style="width:452px" %)Ethernet1 Local DNS2 address high byte 4
	932	\|=(% style="width: 160px;" %)HSW1890\|(% colspan="1" style="width:282px" %)Enable refresh current network signal\|(% style="width:452px" %)(((
	933	* =1: Refresh the network signal once after triggered (This register will be automatically reset after triggered, only update the signal value once after per 15 seconds, not able to update twice in the short interval)
	934	* =Others: not refresh
	935	)))
	936	\|=(% style="width: 160px;" %)HSW1891\|(% colspan="1" style="width:282px" %)Enable clear cache for screen data \|(% style="width:452px" %)(((
	937	* =1, not clear screen cache when switch language
	938	* =2, trigger clear cache of all screens for once time
	939	* =3, always clear cache of all screen data
	940	)))
	941	\|=(% style="width: 160px;" %)HSW1892\|(% colspan="1" style="width:282px" %)Keyboard key polling interval setting\|(% style="width:452px" %)(((
	942	~=0，50ms；
	943
	944	~=1，40ms；
	945
	946	~=2，30ms；
	947
	948	~=3，20ms；
	949
	950	~=4，10ms；
	951	)))
	952	\|=(% style="width: 160px;" %)HSW1893\|(% colspan="1" style="width:282px" %)Cursor mode switch\|(% style="width:452px" %)(((
	953	~=0, default free mode;
	954
	955	~=1, selected box mode;
	956
	957	~=2, selected gray mode;
	958
	959	~=3, mouse selected mode;
	960	)))
	961	\|=(% style="width: 160px;" %)HSW1894\|(% colspan="1" style="width:282px" %)Enable a specific serial keyboard\|(% style="width:452px" %)(((
	962	~=1 Enable;
	963
	964	~=Other, not enabled;
	965
	966	Note: Only valid for initialization, recommended to use in background initialization script;
	967	)))
	968	\|=(% style="width: 160px;" %)HSW1895\|(% colspan="1" style="width:282px" %)Controls whether keyboard keys are effective in certain situations\|(% style="width:452px" %)(((
	969	~=0, by default, the key trigger does not take effect when the screen is off or in screen saver mode;
	970
	971	~=1, HSX1895.0=1, the key trigger will also take effect when the screen is off;
	972
	973	~=2, HSX1895.1=1, the key trigger will also take effect in screen saver mode;
	974	)))
	975	\|=(% style="width: 160px;" %)HSW1903\|(% colspan="1" style="width:282px" %)Check the network cable connection status\|(% style="width:452px" %)If a network cable is detected, it is set to 1; if no network cable is detected, it is set to 0
	976	\|=(% style="width: 160px;" %)HSW10000~~19999\|(% style="width:282px" %)Power-down storage area\|(% style="width:452px" %)After restart, the data remains
	977	\|=(% style="width: 160px;" %)HSW10035\|(% rowspan="13" style="width:282px" %)(((
	978	Note: Valid when Ethernet1 of HMI is plugged into the network cable.
	979	① When the Ethernet setting is enabled in the project parameters, this register displays the set value.
	980	② When the Ethernet setting is not enabled in the engineering parameters, the register displays the Ethernet IP automatically acquired by the HMI.
	981	③ When the HMI is not plugged into the network cable, the register will show 0 whether the engineering parameters are set or not.
	982	④ IP related registers can be read and written (only static IP mode can be written).
	983	)))\|(% style="width:452px" %)Local IP address high byte 1
	984	\|=(% style="width: 160px;" %)HSW10036\|(% style="width:452px" %)Local IP address high byte 2
	985	\|=(% style="width: 160px;" %)HSW10037\|(% style="width:452px" %)Local IP address high byte 3
	986	\|=(% style="width: 160px;" %)HSW10038\|(% style="width:452px" %)Local IP address high byte 4
	987	\|=(% style="width: 160px;" %)HSW10039\|(% style="width:452px" %)Local mask IP address high byte 1
	988	\|=(% style="width: 160px;" %)HSW10040\|(% style="width:452px" %)Local mask IP address high byte 2
	989	\|=(% style="width: 160px;" %)HSW10041\|(% style="width:452px" %)Local mask IP address high byte 3
	990	\|=(% style="width: 160px;" %)HSW10042\|(% style="width:452px" %)Local mask IP address high byte 4
	991	\|=(% style="width: 160px;" %)HSW10043\|(% style="width:452px" %)Local gateway address high byte 1
	992	\|=(% style="width: 160px;" %)HSW10044\|(% style="width:452px" %)Local gateway address high byte 2
	993	\|=(% style="width: 160px;" %)HSW10045\|(% style="width:452px" %)Local gateway address high byte 3
	994	\|=(% style="width: 160px;" %)HSW10046\|(% style="width:452px" %)Local gateway address high byte 4
	995	\|=(% style="width: 160px;" %)HSW10047\|(% style="width:452px" %)Local port address
	996	\|=(% style="width: 160px;" %)HSW10048\|(% rowspan="6" style="width:282px" %)(((
	997	①Display the MAC code of Ethernet1 NIC
	998
	999	(hexadecimal display)
	1000
	1001	②Read-only mode, not modifiable
	1002	)))\|(% style="width:452px" %)Local MAC code high word 1
	1003	\|=(% style="width: 160px;" %)HSW10049\|(% style="width:452px" %)Local MAC code high word 2
	1004	\|=(% style="width: 160px;" %)HSW10050\|(% style="width:452px" %)Local MAC code high word 3
	1005	\|=(% style="width: 160px;" %)HSW10051\|(% style="width:452px" %)Local MAC code high word 4
	1006	\|=(% style="width: 160px;" %)HSW10052\|(% style="width:452px" %)Local MAC code high word 5
	1007	\|=(% style="width: 160px;" %)HSW10053\|(% style="width:452px" %)Local MAC code high word 6
	1008	\|=(% style="width: 160px;" %)HSW10118\|(% colspan="1" rowspan="2" style="width:282px" %)TSAP settings for HMI in the Siemens LOGO! 8 protocol\|(% style="width:452px" %)HMI local TSAP, which corresponds to the remote TSAP of PLC
	1009	\|=(% style="width: 160px;" %)HSW10119\|(% style="width:452px" %)HMI remote TSAP, which corresponds to the local TSAP of PLC
	1010	\|=(% style="width: 160px;" %)HSW10461~~10493\|(% style="width:282px" %)Remote access password\|(% style="width:452px" %)8-character remote access password
	1011	\|=(% style="width: 160px;" %)HSW10494~~10558\|(% style="width:282px" %)Machine ID (Read only)\|(% style="width:452px" %)Machine ID for remote access (read only 64-bit)
	1012	\|=(% style="width: 160px;" %)HSW10576\|(% style="width:282px" %)Save dynamic installment settings\|(% style="width:452px" %)HSX10576.0=1: Save the set dynamic installment information
	1013	\|=(% style="width: 160px;" %)HSW10577\|(% style="width:282px" %)Control address for installment\|(% style="width:452px" %)(((
	1014	* HSX10577.0=0: disable dynamic installment
	1015	* HSX10577.0=1: enable dynamic installment
	1016	* HSX10577.1=0: disable static installment
	1017	* HSX10577.1=1: enable static installment
	1018	)))
	1019	\|=(% style="width: 160px;" %)HSW10578-10583\|(% style="width:282px" %)Password for dynamic installment\|(% style="width:452px" %)Character Input/ Display (length: 6)
	1020	\|=(% style="width: 160px;" %)HSW10584-10586\|(% style="width:282px" %)Expiry time of dynamic installment\|(% style="width:452px" %)Expiry time: YYYYMMDD (Numeric Input/ Display)
	1021	\|=(% style="width: 160px;" %)HSW10587-10589\|(% style="width:282px" %)Last expiry time of dynamic installment\|(% style="width:452px" %)Expiry time: YYYYMMDD (Numeric Input/ Display)
	1022	\|=(% style="width: 160px;" %)HSW10590\|(% style="width:282px" %)Background light time\|(% style="width:452px" %)(((
	1023	Set the light time for background
	1024
	1025	* =0: The screen backlight is always on.
	1026	* =Others: The screen backlight is on for a period of time and then turns off. The length of time is controlled by the value of the register address. Unit: second.
	1027	)))
	1028	\|=(% style="width: 160px;" %)HSW10591\|(% style="width:282px" %)Backlight brightness adjustment\|(% style="width:452px" %)Backlight brightness range: 1 (darkest) ~~ 100 (brightest)
	1029	\|=(% style="width: 160px;" %)HSW10603\|(% style="width:282px" %)Set the printer to print orientation\|(% style="width:452px" %)(((
	1030	Set the print direction:
	1031
	1032	* =1: Forward printing
	1033	* =2: Reverse print
	1034	* =Other: Forward print
	1035	)))
	1036	\|=(% style="width: 160px;" %)HSW10604\|(% style="width:282px" %)Print dot type\|(% style="width:452px" %)(((
	1037	* =1: new firmware 8 dot matrix type
	1038	* =2: new firmware 24 dot matrix type
	1039	* =3: old firmware 8 dot matrix type
	1040	* =4: old firmware 24 dot matrix type
	1041	* =Other: new firmware 8 dot matrix type
	1042	)))
	1043	\|=(% style="width: 160px;" %)HSW10605\|(% style="width:282px" %)Print width of printer\|(% style="width:452px" %)Set the width of the printer to print (in pixels), such as HSW10605 = 394: The printer supports images with a print width of 394 pixels
	1044	\|=(% style="width: 160px;" %)HSW10606\|(% style="width:282px" %)Printer instruction type\|(% style="width:452px" %)(((
	1045	* =1: Graphic print type
	1046	* =2: Dot density printing type
	1047	* =3(Default value): special for EPSON printer
	1048	)))
	1049	\|=(% style="width: 160px;" %)HSW10607\|(% style="width:282px" %)Printer paper cutting function\|(% style="width:452px" %)(((
	1050	* =1: Enable
	1051	* =2: Disable
	1052	)))
	1053	\|=(% style="width: 160px;" %)HSW10608\|(% style="width:282px" %)Print the alignment of the text\|(% style="width:452px" %)(((
	1054	* =1: Left alignment
	1055	* =2: Center alignment
	1056	* =3: Right alignment
	1057	)))
	1058	\|=(% style="width: 160px;" %)HSW10611\|(% style="width:282px" %)Set weconcloud server\|(% style="width:452px" %)(((
	1059	* =0: Select the server configured in "Project Settings"
	1060	* =1: select Server 1
	1061	* =2: select Server 2
	1062	)))
	1063	\|=(% style="width: 160px;" %)HSW11750\|(% style="width:282px" %)Set the language of the Message List prompt (ie series)\|(% style="width:452px" %)(((
	1064	* =0: which is followed the project language
	1065	* =1: English
	1066	* =2: Chinese
	1067	)))
	1068	\|=(% style="width: 160px;" %)HSW11752\|(% style="width:282px" %)Traffic monitoring control\|(% style="width:452px" %)= 1: Enable the flow monitoring function
	1069	~= Other: Disable the flow monitoring function
	1070	\|=(% style="width: 160px;" %)HSW11753\|(% style="width:282px" %)Traffic monitoring network card type\|(% style="width:452px" %)= 0: Ethernet card
	1071	~= 1: 4G
	1072	~= 2: Wi-Fi
	1073	\|=(% style="width: 160px;" %)HSW11754-11755\|(% style="width:282px" %)Historical traffic consumption\|(% style="width:452px" %)The total traffic consumed historically (bytes) [value is an integer]
	1074	\|=(% style="width: 160px;" %)HSW11756\|(% style="width:282px" %)(((
	1075	Access permission restrictions
	1076
	1077	(ig series and 8000/9000 series with -R after system upgrade)
	1078	)))\|(% style="width:452px" %)(((
	1079	* =0: LAN or the external network both OK
	1080	* =1: Only LAN access
	1081	* =2: Only external network can access
	1082	* =3: Close the functions
	1083	)))
	1084	\|=(% style="width: 160px;" %)HSW11757\|(% style="width:282px" %)Enable the valid date of the dynamic installment password\|(% style="width:452px" %)(((
	1085	* =0: Disabled
	1086	* =1: Enable
	1087	)))
	1088	\|=(% style="width: 160px;" %)HSW11758\|(% style="width:282px" %)Enable Screensaver\|(% style="width:452px" %)(((
	1089	* =0: Disabled
	1090	* =1: Enable
	1091	)))
	1092	\|=(% style="width: 160px;" %)HSW11759\|(% style="width:282px" %)Screensaver interval time\|(% style="width:452px" %)(((
	1093	Set the time how long will enter Screensaver (Range 10~~43200s)
	1094	)))
	1095	\|=(% style="width: 160px;" %)HSW11760\|(% style="width:282px" %)Screensaver countdown\|(% style="width:452px" %)Display the countdown to enter the Screensaver, unit: second.
	1096	\|=(% style="width: 160px;" %)HSW11761\|(% style="width:282px" %)Screensaver screen number\|(% style="width:452px" %)Set the screen number for Screensaver
	1097	\|=(% style="width: 160px;" %)(((
	1098	HSW11762
	1099	)))\|(% style="width:282px" %)(((
	1100	Dynamic screensaver control address
	1101	)))\|(% style="width:452px" %)(((
	1102	HSX11762.0=0, initialize with project configuration;
	1103
	1104	HSX11762.0=1, initialize with special register configuration;
	1105
	1106	HSX11762.1=0, disable dynamic screensaver;
	1107
	1108	HSX11762.1=1, enable dynamic screensaver
	1109	)))
	1110	\|=(% style="width: 160px;" %)(((
	1111	HSW11763
	1112	)))\|(% style="width:282px" %)(((
	1113	Waiting time to enter the dynamic screensaver
	1114	)))\|(% style="width:452px" %)(((
	1115	Waiting time when the screen is not operated, range 1~~720 minutes
	1116	)))
	1117	\|=(% style="width: 160px;" %)(((
	1118	HSW11764
	1119	)))\|(% style="width:282px" %)(((
	1120	Animated screensaver animation type
	1121	)))\|(% style="width:452px" %)(((
	1122	~=0: Raster,=1: Blinds,=2: Bubble
	1123	)))
	1124	\|=(% style="width: 160px;" %)HSW11767\|(% style="width:282px" %)Remote screen display adaptation mode switching\|(% style="width:452px" %)=0, default mode, remote full-screen zoom display for horizontal screen projects, remote proportional zoom display for vertical screen projects;
	1125	~=1, full-screen zoom display;
	1126	~=2, proportional zoom display according to screen size ratio;
	1127	~=3, no zoom display according to screen pixels;
	1128	\|=(% style="width: 160px;" %)HSW11773\|(% style="width:282px" %)Automatically log out user control address\|(% style="width:452px" %)=3: that is, HSX11773.0=1, HSX11773.1=1, based on the configuration in the address, enable automatic user logout.
	1129	\|=(% style="width: 160px;" %)HSW11774\|(% style="width:282px" %)Automatic user logout interval\|(% style="width:452px" %)(((
	1130	Range: 1 to 255
	1131
	1132	Unit: Minutes
	1133	)))
3.1	1134	\|=(% style="width: 160px;" %)HSW11815\|(% style="width:282px" %)Sub-screen drag function (For PI10.4 and above)\|(% style="width:452px" %)(((
2.1	1135	* =0: Disabled
	1136	* =1: Enable
	1137	)))
5.1	1138	\|=(% style="width: 160px;" %)HSW11816\|(% style="width:282px" %)Recipe record component button spacing control\|(% style="width:452px" %)This controls the spacing between the top and bottom rows of buttons in all recipe record widgets. The value is the pixel spacing between the buttons. The minimum value is 0, and the maximum value is calculated based on the width of each recipe widget. The spacing plus the button size must not exceed the widget's size. (Note that if the register is greater than the maximum value, the actual spacing is the maximum spacing.)
1.1	1139
	1140	== Serial port communication configuration ==
	1141
	1142	(% class="table-bordered" %)
	1143	\|=(% scope="row" style="width: 102px;" %)Port\|=(% style="width: 173px;" %)Function\|=(% style="width: 122px;" %)Address\|=(% colspan="2" style="width: 506px;" %)Description
	1144	\|(% colspan="1" rowspan="11" style="width:102px" %)COM1\|(% style="width:173px" %)Communication mode\|(% style="width:122px" %)HSW10061\|(% colspan="2" style="width:506px" %)(((
	1145	* =0: RS232
	1146	* =1: RS485
	1147	* =2: RS422
	1148	)))
	1149	\|(% style="width:173px" %)Baud rate\|(% style="width:122px" %)HSW10062\|(% colspan="2" style="width:506px" %)(((
	1150	* =0: 1200
	1151	* =1: 2400
	1152	* =2: 4800
	1153	* =3: 9600
	1154	* =4: 19200
	1155	* =5: 38400
	1156	* =6: 57600
	1157	* =7: 115200
4.1	1158	* =8: 187500
	1159	* =9: 230400
1.1	1160	)))
	1161	\|(% style="width:173px" %)Data bit\|(% style="width:122px" %)HSW10063\|(% colspan="2" style="width:506px" %)(((
	1162	* =7: 7 bit
	1163	* =8: 8 bit
	1164	)))
	1165	\|(% style="width:173px" %)Stop bit\|(% style="width:122px" %)HSW10064\|(% colspan="2" style="width:506px" %)(((
	1166	* =1: 1 bit
	1167	* =2: 2 bit
	1168	)))
	1169	\|(% style="width:173px" %)Check bit\|(% style="width:122px" %)HSW10065\|(% colspan="2" style="width:506px" %)(((
	1170	* =0: None
	1171	* =1: ODD
	1172	* =2: EVEN
	1173	)))
	1174	\|(% style="width:173px" %)Wait timeout\|(% style="width:122px" %)HSW10066\|(% colspan="2" style="width:506px" %)(((
	1175	* Unit: ms.
	1176	* Range: 0 to 30000
	1177	)))
	1178	\|(% style="width:173px" %)reveive timeout\|(% style="width:122px" %)HSW10067\|(% colspan="2" style="width:506px" %)(((
	1179	* Unit: ms.
	1180	* Range: 0 to 30000
	1181	)))
	1182	\|(% style="width:173px" %)Retry time\|(% style="width:122px" %)HSW10068\|(% colspan="2" style="width:506px" %)(((
	1183	* Unit: times.
	1184	* Range: 0 to 100
	1185	)))
	1186	\|(% style="width:173px" %)Retry timeout\|(% style="width:122px" %)HSW10069\|(% colspan="2" style="width:506px" %)(((
	1187	* Unit: s.
	1188	* Range: 0 to 300
	1189	)))
	1190	\|(% style="width:173px" %)HMI station number\|(% style="width:122px" %)HSW10070\|(% colspan="2" style="width:506px" %)
	1191	\|(% style="width:173px" %)PLC station number\|(% style="width:122px" %)HSW10071\|(% colspan="2" style="width:506px" %)
	1192	\|(% colspan="1" rowspan="11" style="width:102px" %)COM1-2\|(% style="width:173px" %)Communication mode\|(% style="width:122px" %)HSW10094\|(% colspan="2" style="width:506px" %)(((
	1193	* =0: RS232
	1194	* =1: RS485
	1195	* =2: RS422
	1196	* =6: RS485-2
	1197	)))
	1198	\|(% style="width:173px" %)Baud rate\|(% style="width:122px" %)HSW10095\|(% colspan="2" style="width:506px" %)(((
	1199	* =0: 1200
	1200	* =1: 2400
	1201	* =2: 4800
	1202	* =3: 9600
	1203	* =4: 19200
	1204	* =5: 38400
	1205	* =6: 57600
	1206	* =7: 115200
	1207	* =8: 230400
	1208	)))
	1209	\|(% style="width:173px" %)Data bit\|(% style="width:122px" %)HSW10096\|(% colspan="2" style="width:506px" %)(((
	1210	* =7: 7 bit
	1211	* =8: 8 bit
	1212	)))
	1213	\|(% style="width:173px" %)Stop bit\|(% style="width:122px" %)HSW10097\|(% colspan="2" style="width:506px" %)(((
	1214	* =1: 1 bit
	1215	* =2: 2 bit
	1216	)))
	1217	\|(% style="width:173px" %)Check bit\|(% style="width:122px" %)HSW10098\|(% colspan="2" style="width:506px" %)(((
	1218	* =0: None
	1219	* =1: ODD
	1220	* =2: EVEN
	1221	)))
	1222	\|(% style="width:173px" %)Wait timeout\|(% style="width:122px" %)HSW10099\|(% colspan="2" style="width:506px" %)(((
	1223	* Unit: ms.
	1224	* Range: 0 to 30000
	1225	)))
	1226	\|(% style="width:173px" %)receive timeout\|(% style="width:122px" %)HSW10100\|(% colspan="2" style="width:506px" %)(((
	1227	* Unit: ms.
	1228	* Range: 0 to 30000
	1229	)))
	1230	\|(% style="width:173px" %)Retry time\|(% style="width:122px" %)HSW10101\|(% colspan="2" style="width:506px" %)(((
	1231	* Unit: times.
	1232	* Range: 0 to 100
	1233	)))
	1234	\|(% style="width:173px" %)Retry timeout\|(% style="width:122px" %)HSW10102\|(% colspan="2" style="width:506px" %)(((
	1235	* Unit: s.
	1236	* Range: 0 to 30
	1237	)))
	1238	\|(% style="width:173px" %)HMI station number\|(% style="width:122px" %)HSW10103\|(% colspan="2" style="width:506px" %)
	1239	\|(% style="width:173px" %)PLC station number\|(% style="width:122px" %)HSW10104\|(% colspan="2" style="width:506px" %)
	1240	\|(% colspan="1" rowspan="11" style="width:102px" %)COM1-3\|(% style="width:173px" %)Communication mode\|(% style="width:122px" %)HSW10120\|(% colspan="2" style="width:506px" %)(((
	1241	* =0: RS232
	1242	* =1: RS485
	1243	* =2: RS422
	1244	* =6: RS485-2
	1245	)))
	1246	\|(% style="width:173px" %)Baud rate\|(% style="width:122px" %)HSW10121\|(% colspan="2" style="width:506px" %)(((
	1247	* =0: 1200
	1248	* =1: 2400
	1249	* =2: 4800
	1250	* =3: 9600
	1251	* =4: 19200
	1252	* =5: 38400
	1253	* =6: 57600
	1254	* =7: 115200
	1255	* =8: 230400
	1256	)))
	1257	\|(% style="width:173px" %)Data bit\|(% style="width:122px" %)HSW10122\|(% colspan="2" style="width:506px" %)(((
	1258	* =7: 7 bit
	1259	* =8: 8 bit
	1260	)))
	1261	\|(% style="width:173px" %)Stop bit\|(% style="width:122px" %)HSW10123\|(% colspan="2" style="width:506px" %)(((
	1262	* =1: 1 bit
	1263	* =2: 2 bit
	1264	)))
	1265	\|(% style="width:173px" %)Check bit\|(% style="width:122px" %)HSW10124\|(% colspan="2" style="width:506px" %)(((
	1266	* =0: None
	1267	* =1: ODD
	1268	* =2: EVEN
	1269	)))
	1270	\|(% style="width:173px" %)Wait timeout\|(% style="width:122px" %)HSW10125\|(% colspan="2" style="width:506px" %)(((
	1271	* Unit: ms.
	1272	* Range: 0 to 30000
	1273	)))
	1274	\|(% style="width:173px" %)receive timeout\|(% style="width:122px" %)HSW10126\|(% colspan="2" style="width:506px" %)(((
	1275	* Unit: ms.
	1276	* Range: 0 to 30000
	1277	)))
	1278	\|(% style="width:173px" %)Retry time\|(% style="width:122px" %)HSW10127\|(% colspan="2" style="width:506px" %)(((
	1279	* Unit: times.
	1280	* Range: 0 to 100
	1281	)))
	1282	\|(% style="width:173px" %)Retry timeout\|(% style="width:122px" %)HSW10128\|(% colspan="2" style="width:506px" %)(((
	1283	* Unit: s.
	1284	* Range: 0 to 30
	1285	)))
	1286	\|(% style="width:173px" %)HMI station number\|(% style="width:122px" %)HSW10129\|(% colspan="2" style="width:506px" %)
	1287	\|(% style="width:173px" %)PLC station number\|(% style="width:122px" %)HSW10130\|(% colspan="2" style="width:506px" %)
	1288	\|(% colspan="1" rowspan="11" style="width:102px" %)COM2\|(% style="width:173px" %)Communication mode\|(% style="width:122px" %)HSW10072\|(% colspan="2" style="width:506px" %)(((
	1289	* =0: RS232
	1290	* =1: RS485
	1291	)))
	1292	\|(% style="width:173px" %)Baud rate\|(% style="width:122px" %)HSW10073\|(% colspan="2" style="width:506px" %)(((
	1293	* =0: 1200
	1294	* =1: 2400
	1295	* =2: 4800
	1296	* =3: 9600
	1297	* =4: 19200
	1298	* =5: 38400
	1299	* =6: 57600
	1300	* =7: 115200
	1301	* =8: 230400
	1302	)))
	1303	\|(% style="width:173px" %)Data bit\|(% style="width:122px" %)HSW10074\|(% colspan="2" style="width:506px" %)(((
	1304	* =7: 7 bit
	1305	* =8: 8 bit
	1306	)))
	1307	\|(% style="width:173px" %)Stop bit\|(% style="width:122px" %)HSW10075\|(% colspan="2" style="width:506px" %)(((
	1308	* =1: 1 bit
	1309	* =2: 2 bit
	1310	)))
	1311	\|(% style="width:173px" %)Check bit\|(% style="width:122px" %)HSW10076\|(% colspan="2" style="width:506px" %)(((
	1312	* =0: None
	1313	* =1: ODD
	1314	* =2: EVEN
	1315	)))
	1316	\|(% style="width:173px" %)Wait timeout\|(% style="width:122px" %)HSW10077\|(% colspan="2" style="width:506px" %)(((
	1317	* Unit: ms.
	1318	* Range: 0 to 30000
	1319	)))
	1320	\|(% style="width:173px" %)receive timeout\|(% style="width:122px" %)HSW10078\|(% colspan="2" style="width:506px" %)(((
	1321	* Unit: ms.
	1322	* Range: 0 to 30000
	1323	)))
	1324	\|(% style="width:173px" %)Retry time\|(% style="width:122px" %)HSW10079\|(% colspan="2" style="width:506px" %)(((
	1325	* Unit: times.
	1326	* Range: 0 to 100
	1327	)))
	1328	\|(% style="width:173px" %)Retry timeout\|(% style="width:122px" %)HSW10080\|(% colspan="2" style="width:506px" %)(((
	1329	* Unit: s.
	1330	* Range: 0 to 30
	1331	)))
	1332	\|(% style="width:173px" %)HMI station number\|(% style="width:122px" %)HSW10081\|(% colspan="2" style="width:506px" %)
	1333	\|(% style="width:173px" %)PLC station number\|(% style="width:122px" %)HSW10082\|(% colspan="2" style="width:506px" %)
	1334	\|(% colspan="1" rowspan="11" style="width:102px" %)COM2-2\|(% style="width:173px" %)Communication mode\|(% style="width:122px" %)HSW10105\|(% colspan="2" style="width:506px" %)(((
	1335	* =0: RS232
	1336	* =1: RS485
	1337	)))
	1338	\|(% style="width:173px" %)Baud rate\|(% style="width:122px" %)HSW10106\|(% colspan="2" style="width:506px" %)(((
	1339	* =0: 1200
	1340	* =1: 2400
	1341	* =2: 4800
	1342	* =3: 9600
	1343	* =4: 19200
	1344	* =5: 38400
	1345	* =6: 57600
	1346	* =7: 115200
	1347	* =8: 230400
	1348	)))
	1349	\|(% style="width:173px" %)Data bit\|(% style="width:122px" %)HSW10107\|(% colspan="2" style="width:506px" %)(((
	1350	* =7: 7 bit
	1351	* =8: 8 bit
	1352	)))
	1353	\|(% style="width:173px" %)Stop bit\|(% style="width:122px" %)HSW10108\|(% colspan="2" style="width:506px" %)(((
	1354	* =1: 1 bit
	1355	* =2: 2 bit
	1356	)))
	1357	\|(% style="width:173px" %)Check bit\|(% style="width:122px" %)HSW10109\|(% colspan="2" style="width:506px" %)(((
	1358	* =0: None
	1359	* =1: ODD
	1360	* =2: EVEN
	1361	)))
	1362	\|(% style="width:173px" %)Wait timeout\|(% style="width:122px" %)HSW10110\|(% colspan="2" style="width:506px" %)(((
	1363	* Unit: ms.
	1364	* Range: 0 to 30000
	1365	)))
	1366	\|(% style="width:173px" %)receive timeout\|(% style="width:122px" %)HSW10111\|(% colspan="2" style="width:506px" %)(((
	1367	* Unit: ms.
	1368	* Range: 0 to 30000
	1369	)))
	1370	\|(% style="width:173px" %)Retry time\|(% style="width:122px" %)HSW10112\|(% colspan="2" style="width:506px" %)(((
	1371	* Unit: times.
	1372	* Range: 0 to 100
	1373	)))
	1374	\|(% style="width:173px" %)Retry timeout\|(% style="width:122px" %)HSW10113\|(% colspan="2" style="width:506px" %)(((
	1375	* Unit: s.
	1376	* Range: 0 to 30
	1377	)))
	1378	\|(% style="width:173px" %)HMI station number\|(% style="width:122px" %)HSW10114\|(% colspan="2" style="width:506px" %)
	1379	\|(% style="width:173px" %)PLC station number\|(% style="width:122px" %)HSW10115\|(% colspan="2" style="width:506px" %)
	1380	\|(% colspan="1" rowspan="11" style="width:102px" %)COM3\|(% style="width:173px" %)Communication mode\|(% style="width:122px" %)HSW10083\|(% colspan="2" style="width:506px" %)(((
	1381	* =1: RS485
	1382	)))
	1383	\|(% style="width:173px" %)Baud rate\|(% style="width:122px" %)HSW10084\|(% colspan="2" style="width:506px" %)(((
	1384	* =0: 1200
	1385	* =1: 2400
	1386	* =2: 4800
	1387	* =3: 9600
	1388	* =4: 19200
	1389	* =5: 38400
	1390	* =6: 57600
	1391	* =7: 115200
	1392	* =8: 230400
	1393	)))
	1394	\|(% style="width:173px" %)Data bit\|(% style="width:122px" %)HSW10085\|(% colspan="2" style="width:506px" %)(((
	1395	* =7: 7 bit
	1396	* =8: 8 bit
	1397	)))
	1398	\|(% style="width:173px" %)Stop bit\|(% style="width:122px" %)HSW10086\|(% colspan="2" style="width:506px" %)(((
	1399	* =1: 1 bit
	1400	* =2: 2 bit
	1401	)))
	1402	\|(% style="width:173px" %)Check bit\|(% style="width:122px" %)HSW10087\|(% colspan="2" style="width:506px" %)(((
	1403	* =0: None
	1404	* =1: ODD
	1405	* =2: EVEN
	1406	)))
	1407	\|(% style="width:173px" %)Wait timeout\|(% style="width:122px" %)HSW10088\|(% colspan="2" style="width:506px" %)(((
	1408	* Unit: ms.
	1409	* Range: 0 to 30000
	1410	)))
	1411	\|(% style="width:173px" %)receive timeout\|(% style="width:122px" %)HSW10089\|(% colspan="2" style="width:506px" %)(((
	1412	* Unit: ms.
	1413	* Range: 0 to 30000
	1414	)))
	1415	\|(% style="width:173px" %)Retry time\|(% style="width:122px" %)HSW10090\|(% colspan="2" style="width:506px" %)(((
	1416	* Unit: times.
	1417	* Range: 0 to 100
	1418	)))
	1419	\|(% style="width:173px" %)Retry timeout\|(% style="width:122px" %)HSW10091\|(% colspan="2" style="width:506px" %)(((
	1420	* Unit: s.
	1421	* Range: 0 to 30
	1422	)))
	1423	\|(% style="width:173px" %)HMI station number\|(% style="width:122px" %)HSW10092\|(% colspan="2" style="width:506px" %)
	1424	\|(% style="width:173px" %)PLC station number\|(% style="width:122px" %)HSW10093\|(% colspan="2" style="width:506px" %)
	1425	\|(% colspan="1" rowspan="2" style="width:102px" %)CAN port\|(% style="width:173px" %)CAN1 baud rate\|(% style="width:122px" %)HSW010116\|(% style="width:299px" %)(((
	1426	Unit: K, the baud rate must be an integer.
	1427
	1428	For example, when the baud rate required is 250000, just enter 250.
	1429	)))\|(% colspan="1" rowspan="2" style="width:218px" %)✎Note: If baud rate has been modified,please wait 5 seconds,then restart the HMI to take effect.
	1430	\|(% style="width:173px" %)CAN2 baud rate\|(% style="width:122px" %)HSW010117\|(% style="width:299px" %)(((
	1431	Unit: K, the baud rate must be an integer.
	1432
	1433	For example, when the baud rate required is 250000, just enter 250.
	1434	)))
	1435
	1436	== Ethernet communication configuration ==
	1437
	1438	(% class="table-bordered" %)
	1439	\|(% style="width:40px" %)No.\|(% style="width:295px" %)Function\|(% style="width:220px" %)Address\|(% style="width:336px" %)Description
	1440	\|(% rowspan="7" style="width:40px" %)1\|(% colspan="1" rowspan="7" style="width:295px" %)Ethernet parameter configuration for communication number 1 in list. Configure those addresses according to connected device. After configuration, wait for 5 seconds and restart the HMI.\|(% style="width:220px" %)HSW11004\|(% style="width:336px" %)Device IP address high word 1
	1441	\|(% style="width:220px" %)HSW11005\|(% style="width:336px" %)Device IP address high word 2
	1442	\|(% style="width:220px" %)HSW11006\|(% style="width:336px" %)Device IP address high word 3
	1443	\|(% style="width:220px" %)HSW11007\|(% style="width:336px" %)Device IP address high word 4
	1444	\|(% style="width:220px" %)HSW11008\|(% style="width:336px" %)Device Port number
	1445	\|(% style="width:220px" %)HSW11009\|(% style="width:336px" %)(((
	1446	~=2 TCP
	1447
	1448	~=3 UDP
	1449	)))
	1450	\|(% style="width:220px" %)HSW11010\|(% style="width:336px" %)Reserved
	1451	\|(% rowspan="7" style="width:40px" %)2\|(% colspan="1" rowspan="7" style="width:295px" %)Ethernet parameter configuration for communication number 2 in list. Configure those addresses according to connected device. After configuration, wait for 5 seconds and restart the HMI.\|(% style="width:220px" %)HSW11011\|(% style="width:336px" %)Device IP address high word 1
	1452	\|(% style="width:220px" %)HSW11012\|(% style="width:336px" %)Device IP address high word 2
	1453	\|(% style="width:220px" %)HSW11013\|(% style="width:336px" %)Device IP address high word 3
	1454	\|(% style="width:220px" %)HSW11014\|(% style="width:336px" %)Device IP address high word 4
	1455	\|(% style="width:220px" %)HSW11015\|(% style="width:336px" %)Device Port number
	1456	\|(% style="width:220px" %)HSW11016\|(% style="width:336px" %)(((
	1457	~=2 TCP
	1458
	1459	~=3 UDP
	1460	)))
	1461	\|(% style="width:220px" %)HSW11017\|(% style="width:336px" %)Reserved
	1462	\|(% style="width:40px" %)…\|(% style="width:295px" %) \|(% style="width:220px" %)…\|(% style="width:336px" %)…
	1463	\|(% rowspan="7" style="width:40px" %)32\|(% colspan="1" rowspan="7" style="width:295px" %)Ethernet parameter configuration for communication number 32 in list. Configure those addresses according to connected device. After configuration, wait for 5 seconds and restart the HMI.\|(% style="width:220px" %)HSW11221\|(% style="width:336px" %)Device IP address high word 1
	1464	\|(% style="width:220px" %)HSW11222\|(% style="width:336px" %)Device IP address high word 2
	1465	\|(% style="width:220px" %)HSW11223\|(% style="width:336px" %)Device IP address high word 3
	1466	\|(% style="width:220px" %)HSW11224\|(% style="width:336px" %)Device IP address high word 4
	1467	\|(% style="width:220px" %)HSW11225\|(% style="width:336px" %)Device Port number
	1468	\|(% style="width:220px" %)HSW11226\|(% style="width:336px" %)(((
	1469	~=2 TCP;
	1470
	1471	~=3 UDP
	1472	)))
	1473	\|(% style="width:220px" %)HSW11227\|(% style="width:336px" %)Reserved
	1474
	1475	(% class="box infomessage" %)
	1476	(((
	1477	✎Note: The number of Ethernet connections supported by different HMI series varies.
	1478	)))
	1479
	1480	== Communication control ==
	1481
	1482	(% class="table-bordered" %)
	1483	\|=(% style="width: 135px;" %)Communication No.\|=(% style="width: 102px;" %)Station No.\|=(% style="width: 185px;" %)Control bit\|=(% style="width: 191px;" %)Communication lamp\|=(% style="width: 271px;" %)Description
	1484	\|(% colspan="1" rowspan="16" style="width:135px" %)1\|(% style="width:102px" %)0~~15\|(% style="width:185px" %)HSX550.0～HSX550.15\|(% style="width:191px" %)HSX558.0～HSX558.15\|(% rowspan="160" style="width:271px" %)Communication number refers to the number in "Communication Port Configuration". A number provides 256 device station numbers. Each station number corresponds to a communication control bit and a communication indicator bit. Registers HSX550.0 to HSX805.15 are used to control the station numbers from 0 to 127, and registers HSX1150.0 to HSX1405.15 are used to control station numbers 128 to 255.
	1485	\|(% style="width:102px" %)16~~31\|(% style="width:185px" %)HSX551.0～HSX551.15\|(% style="width:191px" %)HSX559.0～HSX559.15
	1486	\|(% style="width:102px" %)32~~47\|(% style="width:185px" %)HSX552.0～HSX552.15\|(% style="width:191px" %)HSX560.0～HSX560.15
	1487	\|(% style="width:102px" %)48~~63\|(% style="width:185px" %)HSX553.0～HSX553.15\|(% style="width:191px" %)HSX561.0～HSX561.15
	1488	\|(% style="width:102px" %)64～79\|(% style="width:185px" %)HSX554.0～HSX554.15\|(% style="width:191px" %)HSX562.0～HSX562.15
	1489	\|(% style="width:102px" %)80～95\|(% style="width:185px" %)HSX555.0～HSX555.15\|(% style="width:191px" %)HSX563.0～HSX563.15
	1490	\|(% style="width:102px" %)96～111\|(% style="width:185px" %)HSX556.0～HSX556.15\|(% style="width:191px" %)HSX564.0～HSX564.15
	1491	\|(% style="width:102px" %)112～127\|(% style="width:185px" %)HSX557.0～HSX557.15\|(% style="width:191px" %)HSX565.0～HSX565.15
	1492	\|(% style="width:102px" %)128～143\|(% style="width:185px" %)HSX1150.0～HSX1150.15\|(% style="width:191px" %)HSX1158.0～HSX1158.15
	1493	\|(% style="width:102px" %)144～159\|(% style="width:185px" %)HSX1151.0～HSX1151.15\|(% style="width:191px" %)HSX1159.0～HSX1159.15
	1494	\|(% style="width:102px" %)160～175\|(% style="width:185px" %)HSX1152.0～HSX1152.15\|(% style="width:191px" %)HSX1160.0～HSX1160.15
	1495	\|(% style="width:102px" %)176～191\|(% style="width:185px" %)HSX1153.0～HSX1153.15\|(% style="width:191px" %)HSX1161.0～HSX1161.15
	1496	\|(% style="width:102px" %)192～207\|(% style="width:185px" %)HSX1154.0～HSX1154.15\|(% style="width:191px" %)HSX1162.0～HSX1162.15
	1497	\|(% style="width:102px" %)208～223\|(% style="width:185px" %)HSX1155.0～HSX1155.15\|(% style="width:191px" %)HSX1163.0～HSX1163.15
	1498	\|(% style="width:102px" %)224～239\|(% style="width:185px" %)HSX1156.0～HSX1156.15\|(% style="width:191px" %)HSX1164.0～HSX1164.15
	1499	\|(% style="width:102px" %)240～255\|(% style="width:185px" %)HSX1157.0～HSX1157.15\|(% style="width:191px" %)HSX1165.0～HSX1165.15
	1500	\|(% colspan="1" rowspan="16" style="width:135px" %)2\|(% style="width:102px" %)0～15\|(% style="width:185px" %)HSX566.0～HSX566.15\|(% style="width:191px" %)HSX574.0～HSX574.15
	1501	\|(% style="width:102px" %)16～31\|(% style="width:185px" %)HSX567.0～HSX567.15\|(% style="width:191px" %)HSX575.0～HSX575.15
	1502	\|(% style="width:102px" %)32～47\|(% style="width:185px" %)HSX568.0～HSX568.15\|(% style="width:191px" %)HSX576.0～HSX576.15
	1503	\|(% style="width:102px" %)48～63\|(% style="width:185px" %)HSX569.0～HSX569.15\|(% style="width:191px" %)HSX577.0～HSX577.15
	1504	\|(% style="width:102px" %)64～79\|(% style="width:185px" %)HSX570.0～HSX570.15\|(% style="width:191px" %)HSX578.0～HSX578.15
	1505	\|(% style="width:102px" %)80～95\|(% style="width:185px" %)HSX571.0～HSX571.15\|(% style="width:191px" %)HSX579.0～HSX579.15
	1506	\|(% style="width:102px" %)96～111\|(% style="width:185px" %)HSX572.0～HSX572.15\|(% style="width:191px" %)HSX580.0～HSX580.15
	1507	\|(% style="width:102px" %)112～127\|(% style="width:185px" %)HSX573.0～HSX573.15\|(% style="width:191px" %)HSX581.0～HSX581.15
	1508	\|(% style="width:102px" %)128～143\|(% style="width:185px" %)HSX1166.0～HSX1166.15\|(% style="width:191px" %)HSX1174.0～HSX1174.15
	1509	\|(% style="width:102px" %)144～159\|(% style="width:185px" %)HSX1167.0～HSX1167.15\|(% style="width:191px" %)HSX1175.0～HSX1175.15
	1510	\|(% style="width:102px" %)160～175\|(% style="width:185px" %)HSX1168.0～HSX1168.15\|(% style="width:191px" %)HSX1176.0～HSX1176.15
	1511	\|(% style="width:102px" %)176～191\|(% style="width:185px" %)HSX1169.0～HSX1169.15\|(% style="width:191px" %)HSX1177.0～HSX1177.15
	1512	\|(% style="width:102px" %)192～207\|(% style="width:185px" %)HSX1170.0～HSX1170.15\|(% style="width:191px" %)HSX1178.0～HSX1178.15
	1513	\|(% style="width:102px" %)208～223\|(% style="width:185px" %)HSX1171.0～HSX1171.15\|(% style="width:191px" %)HSX1179.0～HSX1179.15
	1514	\|(% style="width:102px" %)224～239\|(% style="width:185px" %)HSX1172.0～HSX1172.15\|(% style="width:191px" %)HSX1180.0～HSX1180.15
	1515	\|(% style="width:102px" %)240～255\|(% style="width:185px" %)HSX1173.0～HSX1173.15\|(% style="width:191px" %)HSX1181.0～HSX1181.15
	1516	\|(% colspan="1" rowspan="16" style="width:135px" %)3\|(% style="width:102px" %)0～15\|(% style="width:185px" %)HSX582.0～HSX582.15\|(% style="width:191px" %)HSX590.0～HSX590.15
	1517	\|(% style="width:102px" %)16～31\|(% style="width:185px" %)HSX583.0～HSX583.15\|(% style="width:191px" %)HSX591.0～HSX591.15
	1518	\|(% style="width:102px" %)32～47\|(% style="width:185px" %)HSX584.0～HSX584.15\|(% style="width:191px" %)HSX592.0～HSX592.15
	1519	\|(% style="width:102px" %)48～63\|(% style="width:185px" %)HSX585.0～HSX585.15\|(% style="width:191px" %)HSX593.0～HSX593.15
	1520	\|(% style="width:102px" %)64～79\|(% style="width:185px" %)HSX586.0～HSX586.15\|(% style="width:191px" %)HSX594.0～HSX594.15
	1521	\|(% style="width:102px" %)80～95\|(% style="width:185px" %)HSX587.0～HSX587.15\|(% style="width:191px" %)HSX595.0～HSX595.15
	1522	\|(% style="width:102px" %)96～111\|(% style="width:185px" %)HSX588.0～HSX588.15\|(% style="width:191px" %)HSX596.0～HSX596.15
	1523	\|(% style="width:102px" %)112～127\|(% style="width:185px" %)HSX589.0～HSX589.15\|(% style="width:191px" %)HSX597.0～HSX597.15
	1524	\|(% style="width:102px" %)128～143\|(% style="width:185px" %)HSX1182.0～HSX1182.15\|(% style="width:191px" %)HSX1190.0～HSX1190.15
	1525	\|(% style="width:102px" %)144～159\|(% style="width:185px" %)HSX1183.0～HSX1183.15\|(% style="width:191px" %)HSX1191.0～HSX1191.15
	1526	\|(% style="width:102px" %)160～175\|(% style="width:185px" %)HSX1184.0～HSX1184.15\|(% style="width:191px" %)HSX1192.0～HSX1192.15
	1527	\|(% style="width:102px" %)176～191\|(% style="width:185px" %)HSX1185.0～HSX1185.15\|(% style="width:191px" %)HSX1193.0～HSX1193.15
	1528	\|(% style="width:102px" %)192～207\|(% style="width:185px" %)HSX1186.0～HSX1186.15\|(% style="width:191px" %)HSX1194.0～HSX1194.15
	1529	\|(% style="width:102px" %)208～223\|(% style="width:185px" %)HSX1187.0～HSX1187.15\|(% style="width:191px" %)HSX1195.0～HSX1195.15
	1530	\|(% style="width:102px" %)224～239\|(% style="width:185px" %)HSX1188.0～HSX1188.15\|(% style="width:191px" %)HSX1196.0～HSX1196.15
	1531	\|(% style="width:102px" %)240～255\|(% style="width:185px" %)HSX1189.0～HSX1189.15\|(% style="width:191px" %)HSX1197.0～HSX1197.15
	1532	\|(% colspan="1" rowspan="16" style="width:135px" %)4\|(% style="width:102px" %)0～15\|(% style="width:185px" %)HSX598.0～HSX598.15\|(% style="width:191px" %)HSX606.0～HSX606.15
	1533	\|(% style="width:102px" %)16～31\|(% style="width:185px" %)HSX599.0～HSX599.15\|(% style="width:191px" %)HSX607.0～HSX607.15
	1534	\|(% style="width:102px" %)32～47\|(% style="width:185px" %)HSX600.0～HSX600.15\|(% style="width:191px" %)HSX608.0～HSX608.15
	1535	\|(% style="width:102px" %)48～63\|(% style="width:185px" %)HSX601.0～HSX601.15\|(% style="width:191px" %)HSX609.0～HSX609.15
	1536	\|(% style="width:102px" %)64～79\|(% style="width:185px" %)HSX602.0～HSX602.15\|(% style="width:191px" %)HSX610.0～HSX610.15
	1537	\|(% style="width:102px" %)80～95\|(% style="width:185px" %)HSX603.0～HSX603.15\|(% style="width:191px" %)HSX611.0～HSX611.15
	1538	\|(% style="width:102px" %)96～111\|(% style="width:185px" %)HSX604.0～HSX604.15\|(% style="width:191px" %)HSX612.0～HSX612.15
	1539	\|(% style="width:102px" %)112～127\|(% style="width:185px" %)HSX605.0～HSX605.15\|(% style="width:191px" %)HSX613.0～HSX613.15
	1540	\|(% style="width:102px" %)128～143\|(% style="width:185px" %)HSX1198.0～HSX1198.15\|(% style="width:191px" %)HSX1206.0～HSX1206.15
	1541	\|(% style="width:102px" %)144～159\|(% style="width:185px" %)HSX1199.0～HSX1199.15\|(% style="width:191px" %)HSX1207.0～HSX1207.15
	1542	\|(% style="width:102px" %)160～175\|(% style="width:185px" %)HSX1200.0～HSX1200.15\|(% style="width:191px" %)HSX1208.0～HSX1208.15
	1543	\|(% style="width:102px" %)176～191\|(% style="width:185px" %)HSX1201.0～HSX1201.15\|(% style="width:191px" %)HSX1209.0～HSX1209.15
	1544	\|(% style="width:102px" %)192～207\|(% style="width:185px" %)HSX1202.0～HSX1202.15\|(% style="width:191px" %)HSX1210.0～HSX1210.15
	1545	\|(% style="width:102px" %)208～223\|(% style="width:185px" %)HSX1203.0～HSX1203.15\|(% style="width:191px" %)HSX1211.0～HSX1211.15
	1546	\|(% style="width:102px" %)224～239\|(% style="width:185px" %)HSX1204.0～HSX1204.15\|(% style="width:191px" %)HSX1212.0～HSX1212.15
	1547	\|(% style="width:102px" %)240～255\|(% style="width:185px" %)HSX1205.0～HSX1205.15\|(% style="width:191px" %)HSX1213.0～HSX1213.15
	1548	\|(% colspan="1" rowspan="16" style="width:135px" %)5\|(% style="width:102px" %)0～15\|(% style="width:185px" %)HSX614.0～HSX614.15\|(% style="width:191px" %)HSX622.0～HSX622.15
	1549	\|(% style="width:102px" %)16～31\|(% style="width:185px" %)HSX615.0～HSX615.15\|(% style="width:191px" %)HSX623.0～HSX623.15
	1550	\|(% style="width:102px" %)32～47\|(% style="width:185px" %)HSX616.0～HSX616.15\|(% style="width:191px" %)HSX624.0～HSX624.15
	1551	\|(% style="width:102px" %)48～63\|(% style="width:185px" %)HSX617.0～HSX617.15\|(% style="width:191px" %)HSX625.0～HSX625.15
	1552	\|(% style="width:102px" %)64～79\|(% style="width:185px" %)HSX618.0～HSX618.15\|(% style="width:191px" %)HSX626.0～HSX626.15
	1553	\|(% style="width:102px" %)80～95\|(% style="width:185px" %)HSX619.0～HSX619.15\|(% style="width:191px" %)HSX627.0～HSX627.15
	1554	\|(% style="width:102px" %)96～111\|(% style="width:185px" %)HSX620.0～HSX620.15\|(% style="width:191px" %)HSX628.0～HSX628.15
	1555	\|(% style="width:102px" %)112～127\|(% style="width:185px" %)HSX621.0～HSX621.15\|(% style="width:191px" %)HSX629.0～HSX629.15
	1556	\|(% style="width:102px" %)128～143\|(% style="width:185px" %)HSX1214.0～HSX1214.15\|(% style="width:191px" %)HSX1222.0～HSX1222.15
	1557	\|(% style="width:102px" %)144～159\|(% style="width:185px" %)HSX1215.0～HSX1215.15\|(% style="width:191px" %)HSX1223.0～HSX1223.15
	1558	\|(% style="width:102px" %)160～175\|(% style="width:185px" %)HSX1216.0～HSX1216.15\|(% style="width:191px" %)HSX1224.0～HSX1224.15
	1559	\|(% style="width:102px" %)176～191\|(% style="width:185px" %)HSX1217.0～HSX1217.15\|(% style="width:191px" %)HSX1225.0～HSX1225.15
	1560	\|(% style="width:102px" %)192～207\|(% style="width:185px" %)HSX1218.0～HSX1218.15\|(% style="width:191px" %)HSX1226.0～HSX1226.15
	1561	\|(% style="width:102px" %)208～223\|(% style="width:185px" %)HSX1219.0～HSX1219.15\|(% style="width:191px" %)HSX1227.0～HSX1227.15
	1562	\|(% style="width:102px" %)224～239\|(% style="width:185px" %)HSX1220.0～HSX1220.15\|(% style="width:191px" %)HSX1228.0～HSX1228.15
	1563	\|(% style="width:102px" %)240～255\|(% style="width:185px" %)HSX1221.0～HSX1221.15\|(% style="width:191px" %)HSX1229.0～HSX1229.15
	1564	\|(% colspan="1" rowspan="16" style="width:135px" %)6\|(% style="width:102px" %)0～15\|(% style="width:185px" %)HSX630.0～HSX630.15\|(% style="width:191px" %)HSX638.0～HSX638.15
	1565	\|(% style="width:102px" %)16～31\|(% style="width:185px" %)HSX631.0～HSX631.15\|(% style="width:191px" %)HSX639.0～HSX639.15
	1566	\|(% style="width:102px" %)32～47\|(% style="width:185px" %)HSX632.0～HSX632.15\|(% style="width:191px" %)HSX640.0～HSX640.15
	1567	\|(% style="width:102px" %)48～63\|(% style="width:185px" %)HSX633.0～HSX633.15\|(% style="width:191px" %)HSX641.0～HSX641.15
	1568	\|(% style="width:102px" %)64～79\|(% style="width:185px" %)HSX634.0～HSX634.15\|(% style="width:191px" %)HSX642.0～HSX642.15
	1569	\|(% style="width:102px" %)80～95\|(% style="width:185px" %)HSX635.0～HSX635.15\|(% style="width:191px" %)HSX643.0～HSX643.15
	1570	\|(% style="width:102px" %)96～111\|(% style="width:185px" %)HSX636.0～HSX636.15\|(% style="width:191px" %)HSX644.0～HSX644.15
	1571	\|(% style="width:102px" %)112～127\|(% style="width:185px" %)HSX637.0～HSX637.15\|(% style="width:191px" %)HSX645.0～HSX645.15
	1572	\|(% style="width:102px" %)128～143\|(% style="width:185px" %)HSX1230.0～HSX1230.15\|(% style="width:191px" %)HSX1238.0～HSX1238.15
	1573	\|(% style="width:102px" %)144～159\|(% style="width:185px" %)HSX1231.0～HSX1231.15\|(% style="width:191px" %)HSX1239.0～HSX1239.15
	1574	\|(% style="width:102px" %)160～175\|(% style="width:185px" %)HSX1232.0～HSX1232.15\|(% style="width:191px" %)HSX1240.0～HSX1240.15
	1575	\|(% style="width:102px" %)176～191\|(% style="width:185px" %)HSX1233.0～HSX1233.15\|(% style="width:191px" %)HSX1241.0～HSX1241.15
	1576	\|(% style="width:102px" %)192～207\|(% style="width:185px" %)HSX1234.0～HSX1234.15\|(% style="width:191px" %)HSX1242.0～HSX1242.15
	1577	\|(% style="width:102px" %)208～223\|(% style="width:185px" %)HSX1235.0～HSX1235.15\|(% style="width:191px" %)HSX1243.0～HSX1243.15
	1578	\|(% style="width:102px" %)224～239\|(% style="width:185px" %)HSX1236.0～HSX1236.15\|(% style="width:191px" %)HSX1244.0～HSX1244.15
	1579	\|(% style="width:102px" %)240～255\|(% style="width:185px" %)HSX1237.0～HSX1237.15\|(% style="width:191px" %)HSX1245.0～HSX1245.15
	1580	\|(% colspan="1" rowspan="16" style="width:135px" %)7\|(% style="width:102px" %)0～15\|(% style="width:185px" %)HSX646.0～HSX646.15\|(% style="width:191px" %)HSX654.0～HSX654.15
	1581	\|(% style="width:102px" %)16～31\|(% style="width:185px" %)HSX647.0～HSX647.15\|(% style="width:191px" %)HSX655.0～HSX655.15
	1582	\|(% style="width:102px" %)32～47\|(% style="width:185px" %)HSX648.0～HSX648.15\|(% style="width:191px" %)HSX656.0～HSX656.15
	1583	\|(% style="width:102px" %)48～63\|(% style="width:185px" %)HSX649.0～HSX649.15\|(% style="width:191px" %)HSX657.0～HSX657.15
	1584	\|(% style="width:102px" %)64～79\|(% style="width:185px" %)HSX650.0～HSX650.15\|(% style="width:191px" %)HSX658.0～HSX658.15
	1585	\|(% style="width:102px" %)80～95\|(% style="width:185px" %)HSX651.0～HSX651.15\|(% style="width:191px" %)HSX659.0～HSX659.15
	1586	\|(% style="width:102px" %)96～111\|(% style="width:185px" %)HSX652.0～HSX652.15\|(% style="width:191px" %)HSX660.0～HSX660.15
	1587	\|(% style="width:102px" %)112～127\|(% style="width:185px" %)HSX653.0～HSX653.15\|(% style="width:191px" %)HSX661.0～HSX661.15
	1588	\|(% style="width:102px" %)128～143\|(% style="width:185px" %)HSX1246.0～HSX1246.15\|(% style="width:191px" %)HSX1254.0～HSX1254.15
	1589	\|(% style="width:102px" %)144～159\|(% style="width:185px" %)HSX1247.0～HSX1247.15\|(% style="width:191px" %)HSX1255.0～HSX1255.15
	1590	\|(% style="width:102px" %)160～175\|(% style="width:185px" %)HSX1248.0～HSX1248.15\|(% style="width:191px" %)HSX1256.0～HSX1256.15
	1591	\|(% style="width:102px" %)176～191\|(% style="width:185px" %)HSX1249.0～HSX1249.15\|(% style="width:191px" %)HSX1257.0～HSX1257.15
	1592	\|(% style="width:102px" %)192～207\|(% style="width:185px" %)HSX1250.0～HSX1250.15\|(% style="width:191px" %)HSX1258.0～HSX1258.15
	1593	\|(% style="width:102px" %)208～223\|(% style="width:185px" %)HSX1251.0～HSX1251.15\|(% style="width:191px" %)HSX1259.0～HSX1259.15
	1594	\|(% style="width:102px" %)224～239\|(% style="width:185px" %)HSX1252.0～HSX1252.15\|(% style="width:191px" %)HSX1260.0～HSX1260.15
	1595	\|(% style="width:102px" %)240～255\|(% style="width:185px" %)HSX1253.0～HSX1253.15\|(% style="width:191px" %)HSX1261.0～HSX1261.15
	1596	\|(% colspan="1" rowspan="16" style="width:135px" %)8\|(% style="width:102px" %)0～15\|(% style="width:185px" %)HSX662.0～HSX662.15\|(% style="width:191px" %)HSX670.0～HSX670.15
	1597	\|(% style="width:102px" %)16～31\|(% style="width:185px" %)HSX663.0～HSX663.15\|(% style="width:191px" %)HSX671.0～HSX671.15
	1598	\|(% style="width:102px" %)32～47\|(% style="width:185px" %)HSX664.0～HSX664.15\|(% style="width:191px" %)HSX672.0～HSX672.15
	1599	\|(% style="width:102px" %)48～63\|(% style="width:185px" %)HSX665.0～HSX665.15\|(% style="width:191px" %)HSX673.0～HSX673.15
	1600	\|(% style="width:102px" %)64～79\|(% style="width:185px" %)HSX666.0～HSX666.15\|(% style="width:191px" %)HSX674.0～HSX674.15
	1601	\|(% style="width:102px" %)80～95\|(% style="width:185px" %)HSX667.0～HSX667.15\|(% style="width:191px" %)HSX675.0～HSX675.15
	1602	\|(% style="width:102px" %)96～111\|(% style="width:185px" %)HSX668.0～HSX668.15\|(% style="width:191px" %)HSX676.0～HSX676.15
	1603	\|(% style="width:102px" %)112～127\|(% style="width:185px" %)HSX669.0～HSX669.15\|(% style="width:191px" %)HSX677.0～HSX677.15
	1604	\|(% style="width:102px" %)128～143\|(% style="width:185px" %)HSX1262.0～HSX1262.15\|(% style="width:191px" %)HSX1270.0～HSX1270.15
	1605	\|(% style="width:102px" %)144～159\|(% style="width:185px" %)HSX1263.0～HSX1263.15\|(% style="width:191px" %)HSX1271.0～HSX1271.15
	1606	\|(% style="width:102px" %)160～175\|(% style="width:185px" %)HSX1264.0～HSX1264.15\|(% style="width:191px" %)HSX1272.0～HSX1272.15
	1607	\|(% style="width:102px" %)176～191\|(% style="width:185px" %)HSX1265.0～HSX1265.15\|(% style="width:191px" %)HSX1273.0～HSX1273.15
	1608	\|(% style="width:102px" %)192～207\|(% style="width:185px" %)HSX1266.0～HSX1266.15\|(% style="width:191px" %)HSX1274.0～HSX1274.15
	1609	\|(% style="width:102px" %)208～223\|(% style="width:185px" %)HSX1267.0～HSX1267.15\|(% style="width:191px" %)HSX1275.0～HSX1275.15
	1610	\|(% style="width:102px" %)224～239\|(% style="width:185px" %)HSX1268.0～HSX1268.15\|(% style="width:191px" %)HSX1276.0～HSX1276.15
	1611	\|(% style="width:102px" %)240～255\|(% style="width:185px" %)HSX1269.0～HSX1269.15\|(% style="width:191px" %)HSX1277.0～HSX1277.15
	1612	\|(% rowspan="4" style="width:135px" %)9\|(% style="width:102px" %)0~~15\|(% style="width:185px" %)HSX678.0~~678.15\|(% style="width:191px" %)HSX686.0~~686.15
	1613	\|(% style="width:102px" %)16~~31\|(% style="width:185px" %)HSX679.0~~679.15\|(% style="width:191px" %)HSX687.0~~687.15
	1614	\|(% style="width:102px" %)32~~47\|(% style="width:185px" %)HSX680.0~~680.15\|(% style="width:191px" %)HSX688.0~~688.15
	1615	\|(% style="width:102px" %)48~~63\|(% style="width:185px" %)HSX681.0~~681.15\|(% style="width:191px" %)HSX689.0~~689.15
	1616	\|(% rowspan="4" style="width:135px" %)10\|(% style="width:102px" %)0~~15\|(% style="width:185px" %)HSX694.0~~694.15\|(% style="width:191px" %)HSX702.0~~702.15
	1617	\|(% style="width:102px" %)16~~31\|(% style="width:185px" %)HSX695.0~~695.15\|(% style="width:191px" %)HSX703.0~~703.15
	1618	\|(% style="width:102px" %)32~~47\|(% style="width:185px" %)HSX696.0~~696.15\|(% style="width:191px" %)HSX704.0~~704.15
	1619	\|(% style="width:102px" %)48~~63\|(% style="width:185px" %)HSX697.0~~697.15\|(% style="width:191px" %)HSX705.0~~705.15
	1620	\|(% rowspan="4" style="width:135px" %)11\|(% style="width:102px" %)0~~15\|(% style="width:185px" %)HSX710.0~~710.15\|(% style="width:191px" %)HSX718.0~~718.15
	1621	\|(% style="width:102px" %)16~~31\|(% style="width:185px" %)HSX711.0~~711.15\|(% style="width:191px" %)HSX719.0~~719.15
	1622	\|(% style="width:102px" %)32~~47\|(% style="width:185px" %)HSX712.0~~712.15\|(% style="width:191px" %)HSX720.0~~720.15
	1623	\|(% style="width:102px" %)48~~63\|(% style="width:185px" %)HSX713.0~~713.15\|(% style="width:191px" %)HSX721.0~~721.15
	1624	\|(% rowspan="4" style="width:135px" %)12\|(% style="width:102px" %)0~~15\|(% style="width:185px" %)HSX726.0~~726.15\|(% style="width:191px" %)HSX734.0~~734.15
	1625	\|(% style="width:102px" %)16~~31\|(% style="width:185px" %)HSX727.0~~727.15\|(% style="width:191px" %)HSX735.0~~735.15
	1626	\|(% style="width:102px" %)32~~47\|(% style="width:185px" %)HSX728.0~~728.15\|(% style="width:191px" %)HSX736.0~~736.15
	1627	\|(% style="width:102px" %)48~~63\|(% style="width:185px" %)HSX729.0~~729.15\|(% style="width:191px" %)HSX737.0~~737.15
	1628	\|(% rowspan="4" style="width:135px" %)13\|(% style="width:102px" %)0~~15\|(% style="width:185px" %)HSX742.0~~742.15\|(% style="width:191px" %)HSX750.0~~750.15
	1629	\|(% style="width:102px" %)16~~31\|(% style="width:185px" %)HSX743.0~~743.15\|(% style="width:191px" %)HSX751.0~~751.15
	1630	\|(% style="width:102px" %)32~~47\|(% style="width:185px" %)HSX744.0~~744.15\|(% style="width:191px" %)HSX752.0~~752.15
	1631	\|(% style="width:102px" %)48~~63\|(% style="width:185px" %)HSX745.0~~745.15\|(% style="width:191px" %)HSX753.0~~753.15
	1632	\|(% rowspan="4" style="width:135px" %)14\|(% style="width:102px" %)0~~15\|(% style="width:185px" %)HSX758.0~~758.15\|(% style="width:191px" %)HSX766.0~~766.15
	1633	\|(% style="width:102px" %)16~~31\|(% style="width:185px" %)HSX759.0~~759.15\|(% style="width:191px" %)HSX767.0~~767.15
	1634	\|(% style="width:102px" %)32~~47\|(% style="width:185px" %)HSX760.0~~760.15\|(% style="width:191px" %)HSX768.0~~768.15
	1635	\|(% style="width:102px" %)48~~63\|(% style="width:185px" %)HSX761.0~~761.15\|(% style="width:191px" %)HSX769.0~~769.15
	1636	\|(% rowspan="4" style="width:135px" %)15\|(% style="width:102px" %)0~~15\|(% style="width:185px" %)HSX774.0~~774.15\|(% style="width:191px" %)HSX782.0~~782.15
	1637	\|(% style="width:102px" %)16~~31\|(% style="width:185px" %)HSX775.0~~775.15\|(% style="width:191px" %)HSX783.0~~783.15
	1638	\|(% style="width:102px" %)32~~47\|(% style="width:185px" %)HSX776.0~~776.15\|(% style="width:191px" %)HSX784.0~~784.15
	1639	\|(% style="width:102px" %)48~~63\|(% style="width:185px" %)HSX777.0~~777.15\|(% style="width:191px" %)HSX785.0~~785.15
	1640	\|(% rowspan="4" style="width:135px" %)16\|(% style="width:102px" %)0~~15\|(% style="width:185px" %)HSX790.0~~790.15\|(% style="width:191px" %)HSX798.0~~798.15
	1641	\|(% style="width:102px" %)16~~31\|(% style="width:185px" %)HSX791.0~~791.15\|(% style="width:191px" %)HSX799.0~~799.15
	1642	\|(% style="width:102px" %)32~~47\|(% style="width:185px" %)HSX792.0~~792.15\|(% style="width:191px" %)HSX800.0~~800.15
	1643	\|(% style="width:102px" %)48~~63\|(% style="width:185px" %)HSX793.0~~793.15\|(% style="width:191px" %)HSX801.0~~801.15

Wiki source code of 13 HMI Internal Registers

Navigation

Table of Contents