Wiki source code of 13 HMI Internal Registers

Version 6.3 by xingzhi lin on 2025/10/30 15:02

version	line-number	content
1.1	1	= Introduction =
	2
	3	HMI provide four types of HMI address for user. You can use them as temporary variables of the program. The use is consistent with the way access to the PLC register. You could also reference through the address, PIStudio provides three types of such memory.
	4
	5	*HSW, HDW, HUW, HAW are word address, HSX, HDX, HUX, HAX are bit address.
	6
	7	* System data area (HSW): A special register defined by the system.
	8	* Data storage area (HDW/HDX): Users store user data.
	9	* System data area (HUW): A special register defined by the system.
	10	* System Data (HAW): System register used for power-off save.
	11	* Recipe index area (RPW): System register used for recipe index.
	12
	13	HMI internal registers are divided into bit address and word address, which can be accessed in two ways (take HDW as an example).
	14
	15	* Access as word with the prefix "HDW".
	16	** HDW0 means the 1st word of system data area. HDW1 means the 2nd word of system data area.
	17	* Access as bit with the prefix "HDX". The number before "." i". The number before Access in bit with the prefix "HD". The number before Access in bit with the prefix "HDX". The number before "." indicates the number of the word. The number after "." indicates the bit number of the word.
	18	** HDX1020.12 means to access the system data area in bit mode, the specific location is the 13th bit of the 1020 word.
	19
	20	(% class="box infomessage" %)
	21	(((
	22	✎Note:
	23
	24	* Addresses in HDX are the bits from words in HDW, so be careful when using addresses. For example, HDX1020.12 is the 13th bit to access the 1020 word. The value of this bit is the same as that of the word accessed through HDW001020. The 13th bit of this word is actually the same bit as HDX1020.12.
	25	* The address of the bit address HDX is with a decimal point while word addresses are integers.
	26	)))
	27
	28	= Address ranges table =
	29
	30	(% style="text-align:center" %)
	31	[[image:6.png]]
	32
	33	= Data storage area (HDW/HDX) =
	34
	35	It is used to save the temporary data of project.
	36
	37	1. Access as word, and serial number range is from HDW0 to HDW299999.
	38	1. Access as bit, and serial number range is from HDX0.0 to HDX299999.15.
	39
	40	= Power-down save area (HAW/HAX) =
	41
	42	It is system registers used for power-off save.
	43
	44	1. Access as word, and serial number range is from HAW0 to HAW199999.
	45	1. Access as bit, and serial number range is from HAX0.0 to HAX199999.15.
	46
	47	(% class="box infomessage" %)
	48	(((
	49	✎Note:
	50
	51	* HAW/HAX is power-down retention. The register of this type is able to save the data before the power-down.
	52	* To avoid possible device failure, do not immediately power off and reboot when configuring the power-down save addre
	53	)))
	54
	55	= Recipe index area (RPW) =
	56
	57	It is system recipe data power-off save register. The range is from RPW000000 to RPW990450.
	58
	59	(% class="box infomessage" %)
	60	(((
	61	✎Note:
	62
	63	* RPW is power-down retention. The register of this type is able to save the data before the power-down.
	64	* To avoid possible device failure, do not immediately power off and reboot when configuring the power-down save addre
	65	)))
	66
	67	= Single user data area (HUW/HUX) =
	68
	69	It is used for system special registers (reserved by system).
	70
	71	1. Access as word, and serial number range is from HUW0 to HUW1599.
	72	1. Access as bit, and serial number range is from HUX0.0 to HUX1599.15.
	73
	74	(% class="box infomessage" %)
	75	(((
	76	✎Note:
	77
	78	* HUW/HUX is a system special register, so please check the system special register list during use. Please use the address specified in the table and do not use the address which is not mentioned in the table.
	79	)))
	80
	81	(% class="table-bordered" %)
	82	\|=Special register address\|=Description\|=Function
	83	\|=HUW0\|Screen switch\|A single terminal controls the screen switching, and all terminals do not affect each other.
	84	\|=HUW110~~HUW119\|(% rowspan="26" %)Addresses of the built-in keyboard\|The T9 input method stores the selected seria number length
	85	\|=HUW120~~HUW129\|The T9 input method stores the selected Chinese Pinyin length
	86	\|=HUW135\|Input method: first input
	87	\|=HUW136\|Button: T9 Chinese Pinyin page
	88	\|=HUW137\|Button: T9 Chinese characters page
	89	\|=HUW138\|Button: symbol
	90	\|=HUW139\|Button: switch
	91	\|=HUW140\|Button: Chinese characters 1
	92	\|=HUW142\|Button: Chinese characters 2
	93	\|=HUW144\|Button: Chinese characters 3
	94	\|=HUW146\|Button: Chinese characters 4
	95	\|=HUW148\|Button: Chinese characters 5
	96	\|=HUW150\|Button: Chinese characters 6
	97	\|=HUW152\|Button: Chinese characters 7
	98	\|=HUW154\|Button: Chinese characters 8
	99	\|=HUW156\|Button: Chinese characters 9
	100	\|=HUW158\|Button: Chinese characters 10
	101	\|=HUW160~~HUW169\|Button: Chinese Pinyin 1
	102	\|=HUW170~~HUW179\|Button: Chinese Pinyin 2
	103	\|=HUW180~~HUW189\|Button: Chinese Pinyin 3
	104	\|=HUW190~~HUW199\|Button: Chinese Pinyin 4
	105	\|=HUW200~~HUW699\|Input method cache length
	106	\|=HUW700~~HUW749\|Minimum value of the input method
	107	\|=HUW750~~HUW799\|Maximum value of the input method
	108	\|=HUW800\|Case switching of the input method
	109	\|=HUW801~~HUW900\|Input method format cache length
	110	\|=HUW1000\|(% rowspan="12" %)Addresses of user permission\|OK (Sign in)
	111	\|=HUW1001\|Result of operation
	112	\|=HUW1002~~1005\|Old password
	113	\|=HUW1006~~1009\|New password
	114	\|=HUW1010~~1013\|Confirm password
	115	\|=HUW1014~~1029\|New user name
	116	\|=HUW1030~~1157\|States information of user permission
	117	\|=HUW1158~~1335\|User name (Only or drop-down list object)
	118	\|=HUW1336~~1345\|User name description or note
	119	\|=HUW1347\|Hidden function configurations
	120	\|=HUW1348\|Permission settings
	121	\|=HUW1349\|Current user name
	122	\|=HUW1382\|User sign in way\|(((
	123	* 0: Select the user name from drop-down list object for signing in
	124	* 1: Enter the user name in Character Input/Display object for signing in (HUW1014)
	125	)))
	126	\|=HUW1400\|Time interval from last operation\|(((
	127	Shows how long the touch screen has not been clicked, in seconds. 32-bit unsigned integer
	128
	129	✎Note: Clicking by different users will only clear the corresponding register of the currently operating terminal, and the registers on other terminals (such as mobile phones, computers) will not be cleared.
	130	)))
	131	\|=HUW1402\|Keyboard note\|It saves the text information of the keyboard notes when clicking object(HUW1402-HUW1433)
	132	\|=HUW1436\|Current object level\|Indicate current object security level
5.2	133	\|=HUW1502\|Touch status prompt\|(((
	134	* 0: Not touching
	135	* 1: Touching
	136	)))
5.3	137	\|=HUW1503\|The current user's group prompt\|(((
	138	A bit represents one of the groups. The administrator is bit 0, group 0 is bit 1, and group 1 is bit 2 and so on.
1.1	139
5.3	140	For example:
	141
	142	* HUW1503.0=0 (administrator)
	143	* HUW1503.1=1 (group 0)
	144	* HUW1503.2=1 (group 1)
	145	* HUW1503.3=0 (group 2)
	146
	147	This means the current user has the permissions of groups 0 and 1, but not administrator or group 2.
	148	)))
6.2	149	\|=HSW1908\|Total available user storage\|Displays total available user storage (64-bit floating-point, unit: MB).
	150	\|=HSW1912\|Remaining available user storage\|Displays remaining available user storage (64-bit floating-point, unit: MB).
	151	\|=HSW1921\|Touch status indicator\|(((
	152	* 0: Not touching
	153	* 1: Touching
	154	)))
	155	\|=HSW1923\|Exclusive mode switch\|(((
	156	* 0: Disable exclusive mode
	157	* 1: Enable exclusive mode
	158	)))
6.3	159	\|=HSW11773\|Control auto user logout \|(((
	160	Controls the enable state of auto user logout.
5.3	161
6.3	162	* HSX11773.0: =0 Follow project configuration
	163	* HSX11773.0: =1 Follow address configuration
	164	* HSX11773.1: =0 Disable auto logout
	165	* HSX11773.1: =1 Enable auto logout
	166	)))
	167	\|=HSW11774\|Auto user logout waiting time\|Sets the waiting time before automatic logout (1–255 minutes).
	168	\|=(((
	169	==== HSW11775 ====
	170	)))\|Enable NTP time synchronization\|(((
	171	* 1: Enable NTP
	172	* 0: Disable NTP
	173	)))
	174	\|=HSW11776\|Immediate time synchronization\|Perform immediate NTP sync after device startup.
	175	\|=HSW11777~~11780\|Primary time server IP (required when NTP is enabled)\|Each register represents one byte of the IP address (high to low).
	176	\|=HSW11781~~11784\|Second time server IP (optional)\|Each register represents one byte of the IP address (high to low).
	177	\|=HSW11785~~11788\|Third time server IP (optional)\|Each register represents one byte of the IP address (high to low).
	178	\|=HSW11789~~11792\|Fourth time server IP (optional)\|Each register represents one byte of the IP address (high to low).
	179	\|=HSW11793\|Time synchronization period\|(((
	180
	181
	182	High byte of time synchronization period
	183	)))
	184	\|=HSW11794\|Time synchronization period\|(((
	185
	186
	187	Low byte of time synchronization period
	188	)))
	189	\|=HSW11795\|Enable daylight saving time (DST)\|(((
	190	* 1: Enable DST
	191	* 0: Disable DST
	192	)))
	193
1.1	194	= Special data area (HSW/HSX) =
	195
	196	It is used for system special registers (reserved by system).
	197
	198	1. Access as word, and serial number range is from HSW0 to HSW49999. (HSW10000 to HSW19999 are the power-off storage areas)
	199	1. Access as bit, and serial number range is from HSX0.0 to HSX49999.15.
	200
	201	(% class="box infomessage" %)
	202	(((
	203	✎Note:
	204
	205	* HSW / HSX are a system special register, so please check the system special register list during use. Please use the address specified in the table and do not use the address which is not mentioned in the table.
	206	* To avoid possible device failure, do not immediately power off and reboot when configuring the power-down save address.
	207	)))
	208
2.1	209	(% class="table-bordered" style="margin-left:auto; margin-right:auto; width:1024px" %)
1.1	210	\|=(% scope="row" style="width: 160px;" %)Address\|=(% style="width: 282px;" %)Function\|=(% style="width: 452px;" %)Description
	211	\|=(% style="width: 160px;" %)HSW0\|(% style="width:282px" %)Language switch\|(% style="width:452px" %)Multiple language could be set in the project, HMI support maximum 8 languages. (Power-down save supported)
	212	\|=(% style="width: 160px;" %)HSW1\|(% style="width:282px" %)Beep frequency (Only valid in HMI V1.0 System)\|(% style="width:452px" %)Frequency range: 0~~4000
	213	\|=(% style="width: 160px;" %)HSW2\|(% style="width:282px" %)Beep volume (Only valid in HMI V1.0 System)\|(% style="width:452px" %)Volume range: 0~~80
	214	\|=(% style="width: 160px;" %)HSW3\|(% style="width:282px" %)Beep time\|(% style="width:452px" %)Unit: ms
	215	\|=(% style="width: 160px;" %)HSW4\|(% style="width:282px" %)Beep whether enable or not\|(% style="width:452px" %)(((
	216	* =0: Enable.
	217	* =1: Disable.
	218	)))
	219	\|=(% style="width: 160px;" %)HSW5\|(% style="width:282px" %)(((
	220	Alarm indicator
	221	)))\|(% style="width:452px" %)(((
	222	* =0: Currently no alarm or all alarms have been off.
	223	* =1: Currently alarm(s) still keep in on.
	224	)))
	225	\|=(% style="width: 160px;" %)HSW6~~HSW7\|(% style="width:282px" %)Number of alarms\|(% style="width:452px" %)The number of alarm (it also includes the records of alarm confirmed)
	226	\|=(% style="width: 160px;" %)HSW8\|(% style="width:282px" %)Number of unconfirmed history alarm\|(% style="width:452px" %)The number of unconfirmed history alarm
	227	\|=(% style="width: 160px;" %)HSW9\|(% style="width:282px" %)Time out prompt\|(% style="width:452px" %)(((
	228	* =0: Enable
	229	* =1: Disable
	230	)))
	231	\|=(% style="width: 160px;" %)HSW12\|(% style="width:282px" %)Screen swicth\|(% style="width:452px" %)(((
	232	* = 0: Only HSW control the screen switch, and the sreens of all users will switch.
	233	* = 1: Only HUW control the screen switch, and all users do not affect each other.
	234	)))
	235	\|=(% style="width: 160px;" %)HSW13\|(% style="width:282px" %)Screen switch register\|(% style="width:452px" %)Equal to different values, the screen jumps to the corresponding screen number of the screen.
	236	\|=(% style="width: 160px;" %)HSW24\|(% style="width:282px" %)Reboot HMI\|=(% style="width: 452px;" %)1: Reboot
	237	\|=(% style="width: 160px;" %)HSW28\|(% style="width:282px" %)Local time: year\|(% style="width:452px" %)Range: 0~~9999 (system reserved)
	238	\|=(% style="width: 160px;" %)HSW29\|(% style="width:282px" %)Local time: month\|(% style="width:452px" %)Range: 01~~12 (system reserved)
	239	\|=(% style="width: 160px;" %)HSW30\|(% style="width:282px" %)Local time: day\|(% style="width:452px" %)Range: 01~~31 (system reserved)
	240	\|=(% style="width: 160px;" %)HSW31\|(% style="width:282px" %)Local time: hour\|(% style="width:452px" %)Range: 0~~23 (system reserved)
	241	\|=(% style="width: 160px;" %)HSW32\|(% style="width:282px" %)Local time: minute\|(% style="width:452px" %)Range: 0~~59 (system reserved)
	242	\|=(% style="width: 160px;" %)HSW33\|(% style="width:282px" %)Local time: second\|(% style="width:452px" %)Range: 0~~59 (system reserved)
	243	\|=(% style="width: 160px;" %)HSW34\|(% style="width:282px" %)Local time: week\|(% style="width:452px" %)(((
	244	* =0: Sunday.
	245	* =1: Monday.
	246	* =2: Tuesday.
	247	* =3: Wednesday.
	248	* =4: Thursday.
	249	* =5: Friday.
	250	* =6: Saturday.
	251	)))
	252	\|=(% style="width: 160px;" %)HSW39\|(% style="width:282px" %)Beep type(Only valid in HMI V2.0 System)\|(% style="width:452px" %)Type range: 1-5, Default is 1.
	253	\|=(% style="width: 160px;" %)HSW134\|(% style="width:282px" %)(((
	254	Whether the Script is read through
	255
	256
	257	)))\|(% style="width:452px" %)(((
	258	(% class="box infomessage" %)
	259	(((
	260	✎Note: If want to read-only or write-only, please enable this settings.
	261	)))
	262
	263	* =0: Read from HMI cache(Default)
	264	* =1: Read from PLC directly
	265	)))
	266	\|=(% style="width: 160px;" %)HSW135\|(% style="width:282px" %)Confirm installment password\|(% style="width:452px" %)Confirm button for installment password
	267	\|=(% style="width: 160px;" %)HSW151\|(% style="width:282px" %)Installment due\|(% style="width:452px" %)Number of days to installment due
	268	\|=(% style="width: 160px;" %)HSW185~~200\|(% style="width:282px" %)Installment password\|(% style="width:452px" %)Enter installment password
	269	\|=(% style="width: 160px;" %)HSW242\|(% style="width:282px" %)(((
	270	Prompt result of recipe operation
	271
	272	* Upload: Data is written from address to file
	273	* Download: Data is written from a file to an address
	274	)))\|(% style="width:452px" %)(((
	275	* =1: Download recipe, start
	276	* =2: Download recipe, execution error
	277	* =3: Download recipe, files don't exist
	278	* =4: Download recipe, members don't exist
	279	* =5: Download recipe, groups don't exist
	280	* =6: Download recipe, success
	281	* =7: Upload recipe, start
	282	* =8: Upload recipe, execution error
	283	* =9: Upload recipe, files don't exist
	284	* =10: Upload recipe, members don't exist
	285	* =11: Upload recipe, groups don't exist
	286	* =12: Upload recipe, success
	287	* =13: Insert recipe, start
	288	* =14: Insert recipe, execution error
	289	* =15: Insert recipe, files don't exist
	290	* =16: Insert recipe, members don't exist
	291	* =17: Insert recipe, groups don't exist
	292	* =18: Insert recipe, success
	293	* =19: Delete recipe, start
	294	* =20: Delete recipe, execution error
	295	* =21: Delete recipe, files don't exist
	296	* =22: Delete recipe, members don't exist
	297	* =23: Delete recipe, groups don't exist
	298	* =24: Delete recipe, success
	299	* =25: Delete and sort recipe, start
	300	* =26: Delete recipe and sort, execution error
	301	* =27: Delete recipe and sort, files don't exist
	302	* =28: Delete recipe and sort, members don't exist
	303	* =29: Delete recipe and sort, groups don't exist
	304	* =30: Delete recipe and sort, success
	305	* =37: CSV recipe files import successfully
	306	* =38: CSV recipe files import failed.
	307	)))
	308	\|=(% style="width: 160px;" %)HSW243\|(% style="width:282px" %)Prompt result of recipe index\|(% style="width:452px" %)(((
	309	* =31: Recipe index, start
	310	* =32: Recipe index, execution error
	311	* =33: Recipe index, files don't exist
	312	* =34: Recipe index, members don't exist
	313	* =35: Recipe index, groups don't exist
	314	* =36: Recipe index, success
	315	)))
	316	\|=(% style="width: 160px;" %)HSW521\|(% style="width:282px" %)Delete graph and alarm record\|(% style="width:452px" %)(((
	317	* =0: No operation
	318	* =1: HSX521.0=1, delete all records.
	319	* =2: HSX521.1=1, delete all trend graph.
	320	* =4: HSX521.2=1, delete all alarms.
	321	* =16: HSX521.4=1, delete history XY plot.
	322	* =32: HSX521.5=1, delete data records in SD card or USB flash disk;(Please make a setting which is saved to USB flash disk or SD card in project setting).
	323	* =64: HSX521.6=1, delete alarms records in SD card or USB flash disk; (Please make a setting which is saved to USB flash disk or SD card in project setting).
	324	)))
	325	\|=(% style="width: 160px;" %)HSW522\|(% style="width:282px" %)Copy and paste the alarm/data files in flash to the USB flash disk\|(% style="width:452px" %)(((
	326	* =0: No operation
	327	* =1: HSX522.0=1, copy all record
	328	* =2: HSX522.2=1, copy history XY trend graph
	329	* =8: HSX522.3=1, copy alarm record
	330	* =32: HSX522.5=1, copy recipe
	331	)))
	332	\|=(% style="width: 160px;" %)HSW523\|(% style="width:282px" %)Copy and paste the alarm/data files in flash to the SD card\|(% style="width:452px" %)(((
	333	* =0: No operation
	334	* =1: HSX523.0=1, copy all record
	335	* =4: HSX523.2=1, copy history XY trend graph
	336	* =8: HSX523.3=1, copy alarm record
	337	)))
	338	\|=(% style="width: 160px;" %)HSW524\|(% style="width:282px" %)Copy and paste the alarm/data files in SD card to the USB flash disk\|(% style="width:452px" %)(((
	339	* =0: no operation
	340	* =4: HSX524.2=1, copy history XY trend graph
	341	* =8: HSX524.3=1, copy alarm record
	342	* =16: HSX524.4=1, copy history alarm record
	343	* =32: HSX524.5=1, copy data record
	344	)))
	345	\|=(% style="width: 160px;" %)HSW525\|(% style="width:282px" %)Copy and paste the alarm/data files in USB flash disk to SD card\|(% style="width:452px" %)(((
	346	* =0: no operation
	347	* =4: HSX525.2=1, copy history XY trend graph
	348	* =8: HSX525.3=1, copy alarm record
	349	* =16: HSX525.4=1, copy history alarm record
	350	* =32: HSX525.5= 1, copy data record
	351	)))
	352	\|=(% style="width: 160px;" %)HSW526\|(% style="width:282px" %)Delete file list\|(% style="width:452px" %)(((
	353	* =0: no operation
	354	* =1: HSX526.0=1, delete designated file
	355	* =2: HSX526.1=1, delete all files
	356	)))
	357	\|=(% style="width: 160px;" %)HSW527\|(% style="width:282px" %)Eject USB flash disk/SD card\|(% style="width:452px" %)(((
	358	* =0: No operation
	359	* =1: Eject USB flash disk
	360	* =2: Eject SD card
	361	)))
	362	\|=(% style="width: 160px;" %)HSW528\|(% style="width:282px" %)The state of USB flash disk\|(% style="width:452px" %)(((
	363	* =1: USB flash disk is detected
	364	* =2: Ejecting USB flash disk, please waiting…
	365	* =3: USB flash disk ejected
	366	)))
	367	\|=(% style="width: 160px;" %)HSW529\|(% style="width:282px" %)The state of SD card\|(% style="width:452px" %)(((
	368	* =1: SD card is detected
	369	* =2: Ejecting SD card, please waiting…
	370	* =3: SD card ejected
	371	)))
	372	\|=(% style="width: 160px;" %)HSW550~~849\|(% style="width:282px" %)Communication control\|(% style="width:452px" %)For communication control and communication lamp (please refer to "[[Communication control>>https://docs.we-con.com.cn/bin/view/PIStudio/13.HMI%20internal%20registers/#HCommunicationcontrol]]" sector for detailed)
	373	\|=(% style="width: 160px;" %)HSW850\|(% style="width:282px" %)(((
	374	Network state
	375
	376	(4G, WIFI and Ethernet)
	377	)))\|(% style="width:452px" %)(((
	378	In HMI V1.0
	379
	380	* =0: Network is disconnected.
	381	* =1: only LAN connected, and APP can't access HMI.
	382	* =2: WECON Cloud connected , APP and web could access HMI.
	383
	384	In HMI V2.0
	385
	386	* =0: Network is disconnected.
	387	* =1: Network is connected.
	388	)))
	389	\|=(% style="width: 160px;" %)HSW855\|(% style="width:282px" %)Backlight Control\|(% style="width:452px" %)(((
	390	* HSX855.0=1: turn on the backlight and reset automatically after being triggered.
	391	* HSX855.1=1: turn off the backlight and reset automatically after being triggered.
	392	)))
	393	\|=(% style="width: 160px;" %)HSW856\|(% style="width:282px" %)Whether to close the indirect screen when the current screen is switched to the other screen)\|(% style="width:452px" %)(((
	394	* =0: close the sub-screen, including the indirect screen;
	395	* =1: not to close.
	396	)))
	397	\|=(% style="width: 160px;" %)HSW857\|(% style="width:282px" %)Permission in remote access (web page, mobile APP, cloud platform, etc.)\|(% style="width:452px" %)(((
	398	* =0: users could switch the screen, control the switch and update data in remote access.
	399	* =1: users could only control function switch (only switch the screen), view data and switch state, but could not operate or update them.
	400	* =2: users could neither operate the screen switch, nor switch operation and data modification, only view. (The ig series and 8000/9000 series with -R after system upgrade)
	401	)))
	402	\|=(% style="width: 160px;" %)HSW860~~861\|(% style="width:282px" %)Data partition remaining space\|(% style="width:452px" %)Display the data partition remaining space, updated every minute, unit(kB)
	403	\|=(% style="width: 160px;" %)HSW880\|(% style="width:282px" %)Enable data partition remaining space\|(% style="width:452px" %)(((
	404	~=1, able to view the data partition remaining space from HSW860~~861.
	405
	406	~=Other value except 1, disable the viewing function.
	407	)))
	408	\|=(% style="width: 160px;" %)HSW881\|(% style="width:282px" %)Storage of Record files\|(% style="width:452px" %)(((
	409	It is used for controlling saving alarm/data record files to U disk / SD card.
	410
	411	* = 0: Save to storage.
	412	* = 1: Don't save to storage.
	413	)))
	414	\|=(% style="width: 160px;" %)HSW882\|(% style="width:282px" %)Storage device status\|(% style="width:452px" %)(((
	415	* HDX882.0=0 USB flash doesn't execute storage or storage finished.
	416	* HDX882.0=1 USB flash is reading data, don't remove USB flash.
	417	* HDX882.1=0 SD card doesn't execute storage or storage finished.
	418	* HDX882.1=1 SD card is reading data, don't remove SD card.
	419	)))
	420	\|=(% style="width: 160px;" %)HSW884\|(% style="width:282px" %)Enter the system network configuration interface\|(% style="width:452px" %)(((
	421	* = 0: Do not enter the network configuration interface
	422	* = 1: Enter the system network configuration interface.
	423	** ig series HMI only supports to enter the system interface
	424
	425	)))
	426	\|=(% style="width: 160px;" %)HSW885\|(% style="width:282px" %)When the control object hides the address is read failed (communication failure), set the display mode of the object\|(% style="width:452px" %)(((
	427	* = 0: displayed by object setting.
	428	* = 1: control address read failure, the address control of all objects is hidden, not displayed.
	429	* = 2: control address read failure, the address control of all objects is displayed, not hidden.
	430	)))
	431	\|=(% style="width: 160px;" %)HSW893\|(% style="width:282px" %)(((
	432	User Permission Control Address, same as HUW1000 feature, please refer to chapter "[[User Permission>>http://13.229.109.52:8080/wiki/pistudio/view/Helps/08.Basic%20Function/#HUserPermission]]"
	433
	434	✎Note: This address can only take effect when it is operated in the real HMI, and the operation is invalid on Web/App side.
	435	)))\|(% style="width:452px" %)(((
	436	* =1: User Log in
	437	* =2: Change User password
	438	* =3: User Log out
	439	* =4: New user
	440	* =5: Delete user
	441	* =6: Add user rights
	442	* =8: Add Hide features
	443	* =9: Delete Profile
	444	* =10: Export Profile
	445	* =11: Import profile
	446	* =12: Export log file
	447	* =13: Delete log file
	448	)))
	449	\|=(% style="width: 160px;" %)HSW900\|(% style="width:282px" %)Quick update frequency settings for objects\|(% style="width:452px" %)(((
	450	Valid when the object is enabled for "quick update". Default: 5.
	451
	452	Range: 1 (fastest) - 50 (slowest)
	453	)))
	454	\|=(% style="width: 160px;" %)HSW920\|(% style="width:282px" %)Static mode Maximum periods\|(% style="width:452px" %)Numeric Input/ Display (range: 0-12)
	455	\|=(% style="width: 160px;" %)HSW921 ~~ 924\|(% style="width:282px" %)Static mode Admin key\|(% style="width:452px" %)Character Input/ Display (length: 8)
	456	\|=(% style="width: 160px;" %)HSW925 ~~ 928\|(% style="width:282px" %)1^^st^^ period key (Static mode)\|(% style="width:452px" %)Character Input/ Display (length: 8)
	457	\|=(% style="width: 160px;" %)HSW929 ~~ 933\|(% style="width:282px" %)1^^st^^ expiry time (Static mode)\|(% style="width:452px" %)Numeric Input/ Display (YYYYMMDDHHMM)
	458	\|=(% style="width: 160px;" %)HSW935 ~~ 938\|(% style="width:282px" %)2^^nd^^ period key (Static mode)\|(% style="width:452px" %)Character Input/ Display (length: 8)
	459	\|=(% style="width: 160px;" %)HSW939 ~~ 943\|(% style="width:282px" %)2^^nd ^^expiry time (Static mode)\|(% style="width:452px" %)Numeric Input/ Display (YYYYMMDDHHMM)
	460	\|=(% style="width: 160px;" %)HSW945 ~~ 948\|(% style="width:282px" %)3^^rd^^ period key (Static mode)\|(% style="width:452px" %)Character Input/ Display (length: 8)
	461	\|=(% style="width: 160px;" %)HSW949 ~~ 953\|(% style="width:282px" %)3^^rd ^^expiry time (Static mode)\|(% style="width:452px" %)Numeric Input/ Display (YYYYMMDDHHMM)
	462	\|=(% style="width: 160px;" %)HSW955 ~~ 958\|(% style="width:282px" %)4^^th^^ period key (Static mode)\|(% style="width:452px" %)Character Input/ Display (length: 8)
	463	\|=(% style="width: 160px;" %)HSW959 ~~ 963\|(% style="width:282px" %)4^^th ^^expiry time (Static mode)\|(% style="width:452px" %)Numeric Input/ Display (YYYYMMDDHHMM)
	464	\|=(% style="width: 160px;" %)HSW965 ~~ 968\|(% style="width:282px" %)5^^th^^ period key (Static mode)\|(% style="width:452px" %)Character Input/ Display (length: 8)
	465	\|=(% style="width: 160px;" %)HSW969 ~~ 973\|(% style="width:282px" %)5^^th ^^expiry time (Static mode)\|(% style="width:452px" %)Numeric Input/ Display (YYYYMMDDHHMM)
	466	\|=(% style="width: 160px;" %)HSW975 ~~ 978\|(% style="width:282px" %)6^^th^^ period key (Static mode)\|(% style="width:452px" %)Character Input/ Display (length: 8)
	467	\|=(% style="width: 160px;" %)HSW979 ~~ 983\|(% style="width:282px" %)6^^th ^^expiry time (Static mode)\|(% style="width:452px" %)Numeric Input/ Display (YYYYMMDDHHMM)
	468	\|=(% style="width: 160px;" %)HSW985 ~~ 988\|(% style="width:282px" %)7^^th^^ period key (Static mode)\|(% style="width:452px" %)Character Input/ Display (length: 8)
	469	\|=(% style="width: 160px;" %)HSW989 ~~ 993\|(% style="width:282px" %)7^^th ^^expiry time (Static mode)\|(% style="width:452px" %)Numeric Input/ Display (YYYYMMDDHHMM)
	470	\|=(% style="width: 160px;" %)HSW995 ~~ 998\|(% style="width:282px" %)8^^th^^ period key (Static mode)\|(% style="width:452px" %)Character Input/ Display (length: 8)
	471	\|=(% style="width: 160px;" %)HSW999 ~~ 1003\|(% style="width:282px" %)8^^th ^^expiry time (Static mode)\|(% style="width:452px" %)Numeric Input/ Display (YYYYMMDDHHMM)
	472	\|=(% style="width: 160px;" %)HSW1005 ~~1008\|(% style="width:282px" %)9^^th^^ period key (Static mode)\|(% style="width:452px" %)Character Input/ Display (length: 8)
	473	\|=(% style="width: 160px;" %)HSW1009 ~~ 1013\|(% style="width:282px" %)9^^th ^^expiry time (Static mode)\|(% style="width:452px" %)Numeric Input/ Display (YYYYMMDDHHMM)
	474	\|=(% style="width: 160px;" %)HSW1015 ~~1018\|(% style="width:282px" %)10^^th^^ period key (Static mode)\|(% style="width:452px" %)Character Input/ Display (length: 8)
	475	\|=(% style="width: 160px;" %)HSW1019 ~~ 1023\|(% style="width:282px" %)10^^th ^^expiry time (Static mode)\|(% style="width:452px" %)Numeric Input/ Display (YYYYMMDDHHMM)
	476	\|=(% style="width: 160px;" %)HSW1025 ~~1028\|(% style="width:282px" %)11^^th^^ period key (Static mode)\|(% style="width:452px" %)Character Input/ Display (length: 8)
	477	\|=(% style="width: 160px;" %)HSW1029 ~~ 1033\|(% style="width:282px" %)11^^th ^^expiry time (Static mode)\|(% style="width:452px" %)Numeric Input/ Display (YYYYMMDDHHMM)
	478	\|=(% style="width: 160px;" %)HSW1035 ~~1038\|(% style="width:282px" %)12^^th^^ period key (Static mode)\|(% style="width:452px" %)Character Input/ Display (length: 8)
	479	\|=(% style="width: 160px;" %)HSW1039 ~~ 1043\|(% style="width:282px" %)12^^th ^^expiry time (Static mode)\|(% style="width:452px" %)Numeric Input/ Display (YYYYMMDDHHMM)
	480	\|=(% style="width: 160px;" %)HSW1046\|(% style="width:282px" %)Current period (Static mode)\|(% style="width:452px" %)Current period (Range 1-13)
	481	\|=(% style="width: 160px;" %)HSW1047\|(% style="width:282px" %)Save settings (Static mode)\|(% style="width:452px" %)(((
	482	* HSX1047.0=1: Save static installment information
	483	* HSX1047.1=1: Write installment information to registers
	484	)))
	485	\|=(% style="width: 160px;" %)HSW1050~~HSW1065\|(% style="width:282px" %)The recipe name that can input csv format\|(% style="width:452px" %)Input CSV format recipe file name through "Character Input/ Display".(This function should be used in combination with the recipefunction)
	486	\|=(% style="width: 160px;" %)HSW1066\|(% style="width:282px" %)Configure the type of the CSV file imported\|(% style="width:452px" %)(((
	487	The CSV file type imported (This function should be used in combination with the recipe function)
	488
	489	* =0: Import customed CSV file. The data in the file is valid.
	490	* =1: Import ordinary recipe files of regular series HMI. The 1st row of the file is invalid.
	491	* =2: Import special recipe files of regular series HMI. The 1st and 3nd rows and the 1st colume of the file is invalid.
	492	)))
	493	\|=(% style="width: 160px;" %)HSW1067\|(% style="width:282px" %)Location where the CSV file is saved\|(% style="width:452px" %)(((
	494	Set the path of CSV file (This function should be used in combination with the recipe function)
	495
	496	* =0: In the CsvFile directory of the USB stick
	497	* =1: In the CsvFile directory of the SD card
	498	)))
	499	\|=(% style="width: 160px;" %)HSW1070\|(% style="width:282px" %)The time interval (seconds) since the last time the screen was clicked\|(% style="width:452px" %)(((
	500	Shows how long the current screen has not been clicked, using a decimal unsigned double word (Numeric Input/ Display).
	501
	502	(% class="box infomessage" %)
	503	(((
	504	✎Note: This register is cleared to zero regardless of which user clicks on the screen.
	505	)))
	506	)))
	507	\|=(% style="width: 160px;" %)HSW1073\|(% style="width:282px" %)Corresponding key value from keyboard\|(% style="width:452px" %)Display the key value of the currently pressed key, the key value is shown in Table 1 (not updated when the character input display is being input)
	508	\|=(% style="width: 160px;" %)HSW1074\|(% style="width:282px" %)Keyboard key status\|(% style="width:452px" %)Display the current button status (not updated when the numeric input display is being input)(((
	509	* =0: key release
	510	* =1: key press
	511	* =2: Long press the button
	512	)))
	513	\|=(% style="width: 160px;" %)HSW1075\|(% style="width:282px" %)Cursor speed\|(% style="width:452px" %)Control the cursor movement speed, the range is 0～100, the default is 20
	514	\|=(% style="width: 160px;" %)HSW1076\|(% style="width:282px" %)Cursor x coordinate value\|(% style="width:452px" %)Record the x value at the current position of the cursor, range: 0 to screen width -1
	515	\|=(% style="width: 160px;" %)HSW1077\|(% style="width:282px" %)Cursor y coordinate value\|(% style="width:452px" %)Record the y value at the current position of the cursor, range: 0 to screen height-1
	516	\|=(% style="width: 160px;" %)HSW1078\|(% style="width:282px" %)Corresponding ASCII code for keyboard keys\|(% style="width:452px" %)Only the ASCII value of letters, numbers, and symbols are displayed, and the ASCII value of the function button is not displayed.
	517	\|=(% style="width: 160px;" %)HSW1079\|(% style="width:282px" %)Trigger to set the cursor position and set the Enter key mode\|(% style="width:452px" %)(((
	518	* HSX1079.0=1: Set the cursor position according to the cursor xy register value;
	519	* HSX1079.1=0: When the numeric/character input display is being input, press Enter to end the input, no value/text part is being input, Enter is a normal click;
	520	* HSX1079.1=1 Regardless of whether the numeric/character component is inputting the Enter key, only normal click is performed, and the keyboard end input is not performed.
	521	)))
	522	\|=(% style="width: 160px;" %)HSW1083\|(% style="width:282px" %)Naming method for printing object screenshots\|(% style="width:452px" %)(((
	523	Example: The time is 2019-01-04 14:29:10 (523 milliseconds), the screen number is 0, and the object ID is 2.
	524
	525	* =0: Use year, month, day, hour, minute, second, millisecond, screen number, part number to name, such as: 2019010414291052302.bmp.
	526	* =1: Name using year, month, day, hour, minute, and second.
	527
	528	For example: 20190104142910.bmp.
	529	)))
	530	\|=(% style="width: 160px;" %)HSW1086\|(% style="width:282px" %)Control address mapping polling cycle, unit: ms\|(% style="width:452px" %)(((
	531	Address mapping polling cycle, effective range: 40~~1000ms, default: 300ms.
	532
	533	* When the set value is greater than 1000, the value is 1000.
	534	* When the set value is lower than 40, it changes to the default value 300
	535	)))
	536	\|=(% style="width: 160px;" %)HSW1087\|(% style="width:282px" %)Control write interval in address mapping\|(% style="width:452px" %)(((
	537	After reading data to the device for N times, Perform an address mapping write operation. N is the interval value. The effective range: 0~~5, and default is 2.
	538
	539	When N more than 5, it is 5.
	540
	541	0 is the fastest and 5 is the slowest.
	542	)))
	543	\|=(% style="width: 160px;" %)HSW1088\|(% style="width:282px" %)Control the write interval of script\|(% style="width:452px" %)(((
	544	After reading data to the device for N times, Perform a script write operation. N is the interval value. The effective range: 0~~5, and default is 2.
	545
	546	When N more than 5, it is 5.
	547
	548	0 is the fastest and 5 is the slowest.
	549	)))
	550	\|=(% style="width: 160px;" %)HSW1089\|(% style="width:282px" %)Control interval of read through\|(% style="width:452px" %)(((
	551	After reading data to the device for N times, Perform a read through operation. N is the interval value. The effective range: 0~~5, and default is 2.
	552
	553	When N more than 5, it is 5.
	554
	555	0 is the fastest and 5 is the slowest.
	556	)))
	557	\|=(% style="width: 160px;" %)HSW1100\|(% colspan="1" rowspan="4" style="width:282px" %)Set the Master IP for Multi-link\|(% style="width:452px" %)High word 1 for Master IP address of multi-link
	558	\|=(% style="width: 160px;" %)HSW1101\|(% style="width:452px" %)High word 2 for Master IP address of multi-link
	559	\|=(% style="width: 160px;" %)HSW1102\|(% style="width:452px" %)High word 3 for Master IP address of multi-link
	560	\|=(% style="width: 160px;" %)HSW1103\|(% style="width:452px" %)High word 4 for Master IP address of multi-link
	561	\|=(% style="width: 160px;" %)HSW1104\|(% style="width:282px" %)Control connection to Master or not for Multi-link slave device\|(% style="width:452px" %)(((
	562	* =1: Connect to the Master
	563	* =0: Do not connect to Master
	564	)))
	565	\|=(% style="width: 160px;" %)HSW1141\|(% style="width:282px" %)Release alarm\|(% style="width:452px" %)(((
	566	* =0, Default value
	567	* =1, Release the alarm generated before the last power-down when starting up
	568	)))
	569	\|=(% style="width: 160px;" %)HSW1200\|(% colspan="1" rowspan="2" style="width:282px" %)TSAP settings for HMI in the Siemens LOGO! 8 protocol(ig series or HMI V2.0)\|(% style="width:452px" %)HMI local TSAP, which corresponds to the remote TSAP of PLC
	570	\|=(% style="width: 160px;" %)HSW1201\|(% style="width:452px" %)HMI remote TSAP, which corresponds to the local TSAP of PLC
	571	\|=(% style="width: 160px;" %)HSW1450\|(% style="width:282px" %)Enable objects level password function\|(% style="width:452px" %)(((
	572	* =0, Disable
	573	* =1, Enable
	574	)))
	575	\|=(% style="width: 160px;" %)HSW1451\|(% style="width:282px" %)Whether the object level passwords are independent of each other\|(% style="width:452px" %)(((
	576	* =0, No, high-level passwords can unlock low-level
	577	* = 1, Yes, high-level passwords cannot unlock low-level
	578	)))
	579	\|=(% style="width: 160px;" %)HSW1452\|(% style="width:282px" %)Initialization level\|(% style="width:452px" %)Initialization level while HMI running
	580	\|=(% style="width: 160px;" %)HSW1454~~1457\|(% style="width:282px" %)Password for Level 1\|(% style="width:452px" %)(((
	581	Display password for level 1, using character input object, up to 8 characters (numbers, letters (case sensitive))
	582	)))
	583	\|=(% style="width: 160px;" %)HSW1458~~1461\|(% style="width:282px" %)Password for Level 2\|(% style="width:452px" %)Display password for level 2, using character input object, up to 8 characters (numbers, letters (case sensitive))
	584	\|=(% style="width: 160px;" %)HSW1462~~1465\|(% style="width:282px" %)Password for Level 3\|(% style="width:452px" %)Display password for level 3, using character input object, up to 8 characters (numbers, letters (case sensitive))
	585	\|=(% style="width: 160px;" %)HSW1466~~1469\|(% style="width:282px" %)Password for Level 4\|(% style="width:452px" %)Display password for level 4, using character input object, up to 8 characters (numbers, letters (case sensitive))
	586	\|=(% style="width: 160px;" %)HSW1470~~1473\|(% style="width:282px" %)Password for Level 5\|(% style="width:452px" %)Display password for level 5, using character input object, up to 8 characters (numbers, letters (case sensitive))
	587	\|=(% style="width: 160px;" %)HSW1474~~1477\|(% style="width:282px" %)Password for Level 6\|(% style="width:452px" %)Display password for level 6, using character input object, up to 8 characters (numbers, letters (case sensitive))
	588	\|=(% style="width: 160px;" %)HSW1478~~1481\|(% style="width:282px" %)Password for Level 7\|(% style="width:452px" %)Display password for level 7, using character input object, up to 8 characters (numbers, letters (case sensitive))
	589	\|=(% style="width: 160px;" %)HSW1482~~1485\|(% style="width:282px" %)Password for Level 8\|(% style="width:452px" %)Display password for level 8, using character input object, up to 8 characters (numbers, letters (case sensitive))
	590	\|=(% style="width: 160px;" %)HSW1486~~1489\|(% style="width:282px" %)Password for Level 9\|(% style="width:452px" %)Display password for level 9, using character input object, up to 8 characters (numbers, letters (case sensitive))
	591	\|=(% style="width: 160px;" %)HSW1490~~1493\|(% style="width:282px" %)Password for Level 10\|(% style="width:452px" %)Display password for level 10, using character input object, up to 8 characters (numbers, letters (case sensitive))
	592	\|=(% style="width: 160px;" %)HSW1494~~1497\|(% style="width:282px" %)Password for Level 11\|(% style="width:452px" %)Display password for level 11, using character input object, up to 8 characters (numbers, letters (case sensitive))
	593	\|=(% style="width: 160px;" %)HSW1498~~1501\|(% style="width:282px" %)Password for Level 12\|(% style="width:452px" %)Display password for level 12, using character input object, up to 8 characters (numbers, letters (case sensitive))
	594	\|=(% style="width: 160px;" %)HSW1502\|(% style="width:282px" %)Modify password for object level\|(% style="width:452px" %)(((
	595	* HSX1502.0=1: Modification comfirmed. Save the data of HSW1450~~HSW1501 to a file for immediate effect.
	596	* HSX1502.1=1:Modification cancelled. Restore the current data of hSW1450-HSW1501 to the data saved in the file last time.
	597	)))
	598	\|=(% style="width: 160px;" %)HSW1509\|(% style="width:282px" %)Curve width\|(% style="width:452px" %)(((
	599	* =0: Use the curve width set by project default.
	600	* =1 to 10: use special register to set curve width.
	601	)))
	602	\|=(% style="width: 160px;" %)HSW1603\|(% style="width:282px" %)Number of current unreleased alarms\|(% style="width:452px" %)The number of current unreleased alarms in alarm record file.
	603	\|=(% style="width: 160px;" %)HSW1604\|(% style="width:282px" %)The auxiliary judgment address when the control bit in the Object Lock fails to be read\|(% style="width:452px" %)(((
	604	* =0: The auxiliary address is invalid.
	605	* =1: When the communication fails, lock the object.
	606	* =2: When the communication fails, unlock the object.
	607	* =Others: The auxiliary address is invalid.
	608	)))
	609	\|=(% style="width: 160px;" %)HSW1605\|(% style="width:282px" %)BCD format natural decimal control\|(% style="width:452px" %)(((
	610	Whether to display natural decimals with decimal point in BCD format:
	611
	612	* 0=Not enabled.
	613	* 1=Enable.
	614
	615	(For example, 56.20 is displayed as 56.2, 33.00 is displayed as 33)
	616	)))
	617	\|=(% style="width: 160px;" %)HSW1606\|(% style="width:282px" %)User permission modification control\|(% style="width:452px" %)(((
	618	* =0: Ordinary users are allowed to modify permissions and other operations
	619	* =1: Only the administrator can operate (default is 0)
	620	)))
	621	\|=(% style="width: 160px;" %)HSW1607\|(% style="width:282px" %)The spacing value among the drop-down items of the drop-down list\|(% style="width:452px" %)10 to 50 is effective, such as: 23 is 2.3 times the height of the object.
	622	\|=(% style="width: 160px;" %)HSW1611\|(% style="width:282px" %)(((
	623	Traditional recipe transfer
	624	)))\|(% style="width:452px" %)(((
	625	* =1: download traditional recipe.
	626	* =2: upload the traditional recipe.
	627	)))
	628	\|=(% style="width: 160px;" %)HSW1612\|(% style="width:282px" %)Traditional Recipe group number\|(% style="width:452px" %)Traditional Recipe group number
	629	\|=(% style="width: 160px;" %)HSW1613\|(% style="width:282px" %)Display the status of network card\|(% style="width:452px" %)(((
	630	* =1: Normal
	631	* =Others: Abnormal
	632	)))
	633	\|=(% style="width: 160px;" %)HSW1614~~1623\|(% style="width:282px" %)Download speed per second\|(% style="width:452px" %)Display the download speed per second. (The value is string)
	634	\|=(% style="width: 160px;" %)HSW1624~~1633\|(% style="width:282px" %)Upnload speed per second\|(% style="width:452px" %)Display the upload speed per second. (The value is string)
	635	\|=(% style="width: 160px;" %)HSW1634~~1643\|(% style="width:282px" %)Flow consumption rate\|(% style="width:452px" %)Display the total flow rate per second (The value is string)
	636	\|=(% style="width: 160px;" %)HSW1644~~1653\|(% style="width:282px" %)Download flow consumption after power on\|(% style="width:452px" %)Display the download flow consumption after power on (The value is string)
	637	\|=(% style="width: 160px;" %)HSW1654~~1663\|(% style="width:282px" %)Upload flow consumption after power on\|(% style="width:452px" %)Display the upload flow consumption after power on (The value is string)
	638	\|=(% style="width: 160px;" %)HSW1664~~1673\|(% style="width:282px" %)Total flow consumption after power on\|(% style="width:452px" %)Display the total flow consumption after power on (download and upload). (The value is string)
	639	\|=(% style="width: 160px;" %)HSW1674~~1683\|(% style="width:282px" %)Historical flow consumption\|(% style="width:452px" %)Display historical flow consumption (download and upload). (The value is string)
	640	\|=(% style="width: 160px;" %)HSW1684~~1693\|(% style="width:282px" %)Flow consumption in 10 minutes\|(% style="width:452px" %)Flow consumption in 10 minutes (download and upload). (The value is string)
	641	\|=(% style="width: 160px;" %)HSW1694~~1703\|(% style="width:282px" %)Flow consumption in 30 minutes\|(% style="width:452px" %)Flow consumption in 30 minutes (download and upload). (The value is string)
	642	\|=(% style="width: 160px;" %)HSW1704~~1713\|(% style="width:282px" %)Flow consumption in 3 hours\|(% style="width:452px" %)Flow consumption in 3 hours (download and upload). (The value is string)
	643	\|=(% style="width: 160px;" %)HSW1715\|(% style="width:282px" %)Reset flow\|(% style="width:452px" %)(((
	644	* =1: Clear historical flow data and restart the count.
	645	* =Others: Invalid
	646	)))
	647	\|=(% style="width: 160px;" %)HSW1719\|(% style="width:282px" %)Network status of Ethernet connnecting to server\|(% style="width:452px" %)(((
	648	* =0: Server connection exception
	649	* =1: Server connection is OK
	650	)))
	651	\|=(% style="width: 160px;" %)HSW1720\|(% colspan="1" rowspan="12" style="width:282px" %)Related IP register in WIFI network status (It is valid when HMI is connected to WIFI)\|(% style="width:452px" %)Local IP address high byte 1
	652	\|=(% style="width: 160px;" %)HSW1721\|(% style="width:452px" %)Local IP address high byte 2
	653	\|=(% style="width: 160px;" %)HSW1722\|(% style="width:452px" %)Local IP address high byte 3
	654	\|=(% style="width: 160px;" %)HSW1723\|(% style="width:452px" %)Local IP address high byte 4
	655	\|=(% style="width: 160px;" %)HSW1724\|(% style="width:452px" %)Local mask IP address high byte 1
	656	\|=(% style="width: 160px;" %)HSW1725\|(% style="width:452px" %)Local mask IP address high byte 2
	657	\|=(% style="width: 160px;" %)HSW1726\|(% style="width:452px" %)Local mask IP address high byte 3
	658	\|=(% style="width: 160px;" %)HSW1727\|(% style="width:452px" %)Local mask IP address high byte 4
	659	\|=(% style="width: 160px;" %)HSW1728\|(% style="width:452px" %)Local gateway IP address high byte 1
	660	\|=(% style="width: 160px;" %)HSW1729\|(% style="width:452px" %)Local gateway IP address high byte 2
	661	\|=(% style="width: 160px;" %)HSW1730\|(% style="width:452px" %)Local gateway IP address high byte 3
	662	\|=(% style="width: 160px;" %)HSW1731\|(% style="width:452px" %)Local gateway IP address high byte 4
	663	\|=(% style="width: 160px;" %)HSW1733\|(% colspan="1" rowspan="6" style="width:282px" %)(((
	664	Display the MAC code of current WIFI
	665
	666	(display in hexadecimal)
	667	)))\|(% style="width:452px" %)Local MAC address high byte 1 (hexadecimal)
	668	\|=(% style="width: 160px;" %)HSW1734\|(% style="width:452px" %)Local MAC address high byte 2 (hexadecimal)
	669	\|=(% style="width: 160px;" %)HSW1735\|(% style="width:452px" %)Local MAC address high byte 3 (hexadecimal)
	670	\|=(% style="width: 160px;" %)HSW1736\|(% style="width:452px" %)Local MAC address high byte 4 (hexadecimal)
	671	\|=(% style="width: 160px;" %)HSW1737\|(% style="width:452px" %)Local MAC address high byte 5 (hexadecimal)
	672	\|=(% style="width: 160px;" %)HSW1738\|(% style="width:452px" %)Local MAC address high byte 6 (hexadecimal)
	673	\|=(% style="width: 160px;" %)HSW1739\|(% style="width:282px" %)Display the network status of WIFI\|(% style="width:452px" %)(((
	674	* =0: Server connection exception
	675	* =1: Server connection is OK
	676	)))
	677	\|=(% style="width: 160px;" %)HSW1740\|(% style="width:282px" %)Wi-fi signal strength\|(% style="width:452px" %)(((
	678	Display the value of Wi-fi signal signal strength, ranges from 0~~100 (Signal strength is automatically obtained only once when HMI is powered on, and it will not be automatically updated. It needs to be used with the HSW1890)
	679	)))
	680	\|=(% style="width: 160px;" %)HSW1741\|(% colspan="1" rowspan="12" style="width:282px" %)Related IP register in 4Gnetwork status (It is valid when HMI is connected to 4G)\|(% style="width:452px" %)Local IP address high byte 1
	681	\|=(% style="width: 160px;" %)HSW1742\|(% style="width:452px" %)Local IP address high byte 2
	682	\|=(% style="width: 160px;" %)HSW1743\|(% style="width:452px" %)Local IP address high byte 3
	683	\|=(% style="width: 160px;" %)HSW1744\|(% style="width:452px" %)Local IP address high byte 4
	684	\|=(% style="width: 160px;" %)HSW1745\|(% style="width:452px" %)Local mask IP address high byte 1
	685	\|=(% style="width: 160px;" %)HSW1746\|(% style="width:452px" %)Local mask IP address high byte 2
	686	\|=(% style="width: 160px;" %)HSW1747\|(% style="width:452px" %)Local mask IP address high byte 3
	687	\|=(% style="width: 160px;" %)HSW1748\|(% style="width:452px" %)Local mask IP address high byte 4
	688	\|=(% style="width: 160px;" %)HSW1749\|(% style="width:452px" %)Local gateway IP address high byte 1
	689	\|=(% style="width: 160px;" %)HSW1750\|(% style="width:452px" %)Local gateway IP address high byte 2
	690	\|=(% style="width: 160px;" %)HSW1751\|(% style="width:452px" %)Local gateway IP address high byte 3
	691	\|=(% style="width: 160px;" %)HSW1752\|(% style="width:452px" %)Local gateway IP address high byte 4
	692	\|=(% style="width: 160px;" %)HSW1754\|(% colspan="1" rowspan="6" style="width:282px" %)(((
	693	Display the MAC code of current WIFI
	694
	695	(display in hexadecimal)
	696	)))\|(% style="width:452px" %)Local MAC address high byte 1 (hexadecimal)
	697	\|=(% style="width: 160px;" %)HSW1755\|(% style="width:452px" %)Local MAC address high byte 2 (hexadecimal)
	698	\|=(% style="width: 160px;" %)HSW1756\|(% style="width:452px" %)Local MAC address high byte 3 (hexadecimal)
	699	\|=(% style="width: 160px;" %)HSW1757\|(% style="width:452px" %)Local MAC address high byte 4 (hexadecimal)
	700	\|=(% style="width: 160px;" %)HSW1758\|(% style="width:452px" %)Local MAC address high byte 5 (hexadecimal)
	701	\|=(% style="width: 160px;" %)HSW1759\|(% style="width:452px" %)Local MAC address high byte 6 (hexadecimal)
	702	\|=(% style="width: 160px;" %)HSW1760\|(% style="width:282px" %)Display 4G network status\|(% style="width:452px" %)(((
	703	* =0: Server connection exception
	704	* =1: Server connection is OK
	705	)))
	706	\|=(% style="width: 160px;" %)HSW1761\|(% style="width:282px" %)Display 4G network signal strength\|(% style="width:452px" %)Signal strength: 0~~31. The greater the value ,the signal is stronger
	707	\|=(% style="width: 160px;" %)(((
	708	HSW1762
	709	)))\|(% colspan="1" rowspan="13" style="width:282px" %)(((
	710	Note: Valid when Ethernet2 of HMI is plugged into the network cable.
	711	①、When the Ethernet setting is enabled in the project parameters, this register displays the set value.
	712	②. When the Ethernet setting is not enabled in the engineering parameters, the register displays the Ethernet IP automatically acquired by the HMI.
	713	③. When the HMI is not plugged into the network cable, the register will show 0 whether the engineering parameters are set or not.
	714	④.IP related registers can be read and written (only static IP mode can be written).
	715	)))\|(% style="width:452px" %)(((
	716	Ethernet2 Local IP address high byte 1
	717	)))
	718	\|=(% style="width: 160px;" %)(((
	719	HSW1763
	720	)))\|(% style="width:452px" %)(((
	721	Ethernet2 Local IP address high byte 2
	722	)))
	723	\|=(% style="width: 160px;" %)(((
	724	HSW1764
	725	)))\|(% style="width:452px" %)(((
	726	Ethernet2 Local IP address high byte 3
	727	)))
	728	\|=(% style="width: 160px;" %)(((
	729	HSW1765
	730	)))\|(% style="width:452px" %)(((
	731	Ethernet2 Local IP address high byte 4
	732	)))
	733	\|=(% style="width: 160px;" %)(((
	734	HSW1766
	735	)))\|(% style="width:452px" %)(((
	736	Ethernet2 Local mask IP address high byte 1
	737	)))
	738	\|=(% style="width: 160px;" %)(((
	739	HSW1767
	740	)))\|(% style="width:452px" %)(((
	741	Ethernet2 Local mask IP address high byte 2
	742	)))
	743	\|=(% style="width: 160px;" %)(((
	744	HSW1768
	745	)))\|(% style="width:452px" %)Ethernet2 Local mask IP address high byte 3
	746	\|=(% style="width: 160px;" %)HSW1769\|(% style="width:452px" %)Ethernet2 Local mask IP address high byte 4
	747	\|=(% style="width: 160px;" %)(((
	748	HSW1770
	749	)))\|(% style="width:452px" %)(((
	750	Ethernet2 Local gateway IP address high byte 1
	751	)))
	752	\|=(% style="width: 160px;" %)(((
	753	HSW1771
	754	)))\|(% style="width:452px" %)(((
	755	Ethernet2 Local gateway IP address high byte 2
	756	)))
	757	\|=(% style="width: 160px;" %)(((
	758	HSW1772
	759	)))\|(% style="width:452px" %)(((
	760	Ethernet2 Local gateway IP address high byte 3
	761	)))
	762	\|=(% style="width: 160px;" %)(((
	763	HSW1773
	764	)))\|(% style="width:452px" %)(((
	765	Ethernet2 Local gateway IP address high byte 4
	766	)))
	767	\|=(% style="width: 160px;" %)(((
	768	HSW1774
	769	)))\|(% style="width:452px" %)(((
	770	Ethernet2 Local Port Address
	771	)))
	772	\|=(% style="width: 160px;" %)(((
	773	HSW1775
	774	)))\|(% colspan="1" rowspan="6" style="width:282px" %)(((
	775	①Display the MAC code of Ethernet2 NIC
	776
	777	(hexadecimal display)
	778
	779	②Read-only mode, not modifiable
	780	)))\|(% style="width:452px" %)(((
	781	Ethernet2 Local MAC code high byte 1
	782	)))
	783	\|=(% style="width: 160px;" %)(((
	784	HSW1776
	785	)))\|(% style="width:452px" %)(((
	786	Ethernet2 Local MAC code high byte 2
	787	)))
	788	\|=(% style="width: 160px;" %)(((
	789	HSW1777
	790	)))\|(% style="width:452px" %)(((
	791	Ethernet2 Local MAC code high byte 3
	792	)))
	793	\|=(% style="width: 160px;" %)(((
	794	HSW1778
	795	)))\|(% style="width:452px" %)(((
	796	Ethernet2 Local MAC code high byte 4
	797	)))
	798	\|=(% style="width: 160px;" %)(((
	799	HSW1779
	800	)))\|(% style="width:452px" %)(((
	801	Ethernet2 Local MAC code high byte 5
	802	)))
	803	\|=(% style="width: 160px;" %)(((
	804	HSW1780
	805	)))\|(% style="width:452px" %)(((
	806	Ethernet2 Local MAC code high byte 6
	807	)))
	808	\|=(% style="width: 160px;" %)(((
	809	HSW1781
	810	)))\|(% colspan="1" rowspan="8" style="width:282px" %)(((
	811	①Display and modify DNS1 and DNS2 of Ethernet2
	812
	813	②Related registers can be read and written mode (only static IP mode can be written)
	814	)))\|(% style="width:452px" %)(((
	815	Ethernet2 Local DNS1 address high byte 1
	816	)))
	817	\|=(% style="width: 160px;" %)(((
	818	HSW1782
	819	)))\|(% style="width:452px" %)(((
	820	Ethernet2 Local DNS1 address high byte 2
	821	)))
	822	\|=(% style="width: 160px;" %)(((
	823	HSW1783
	824	)))\|(% style="width:452px" %)(((
	825	Ethernet2 Local DNS1 address high byte 3
	826	)))
	827	\|=(% style="width: 160px;" %)(((
	828	HSW1784
	829	)))\|(% style="width:452px" %)(((
	830	Ethernet2 Local DNS1 address high byte 4
	831	)))
	832	\|=(% style="width: 160px;" %)(((
	833	HSW1785
	834	)))\|(% style="width:452px" %)(((
	835	Ethernet2 Local DNS2 address high byte 1
	836	)))
	837	\|=(% style="width: 160px;" %)(((
	838	HSW1786
	839	)))\|(% style="width:452px" %)(((
	840	Ethernet2 Local DNS2 address high byte 2
	841	)))
	842	\|=(% style="width: 160px;" %)(((
	843	HSW1787
	844	)))\|(% style="width:452px" %)(((
	845	Ethernet2 Local DNS2 address high byte 3
	846	)))
	847	\|=(% style="width: 160px;" %)(((
	848	HSW1788
	849	)))\|(% style="width:452px" %)(((
	850	Ethernet2 Local DNS2 address high byte 4
	851	)))
	852	\|=(% style="width: 160px;" %)(((
	853	HSW1789
	854	)))\|(% colspan="1" style="width:282px" %)(((
	855	Display or set the dynamic or static IP mode of Ethernet2
	856	)))\|(% style="width:452px" %)(((
	857	HSX1789.0 = 0, Static IP mode
	858
	859	HSX1789.0 = 1, dynamic IP mode
	860	)))
	861	\|=(% style="width: 160px;" %)(((
	862	HSW1790
	863	)))\|(% colspan="1" style="width:282px" %)(((
	864	Confirm Ethernet2 IP, subnet mask, gateway, DNS1, DNS2, and dynamic static IP settings
	865	)))\|(% style="width:452px" %)(((
	866	~= 1, confirm the setting (i.e., after modifying IP-related information, set this address to 1, representing confirmation of the modification, after which it will be reset to 0)
	867	)))
	868	\|=(% style="width: 160px;" %)(((
	869	HSW1791
	870	)))\|(% colspan="1" style="width:282px" %)(((
	871	Network status of the Ethernet2 connection server
	872	)))\|(% style="width:452px" %)(((
	873	~= 0, connection to the server is abnormal = 1, connection to the server is normal
	874	)))
	875	\|=(% style="width: 160px;" %)HSW1852\|(% style="width:282px" %)Control the interval in two consecutive clicks\|(% style="width:452px" %)Limit range: 1~~500ms. The default is 100 ms.
	876	\|=(% style="width: 160px;" %)HSW1853\|(% style="width:282px" %)File format for exporting data records to USB flash drive or SD card\|(% style="width:452px" %)(((
	877	* =0: db database
	878	* =1: CSV
	879
	880	(Only valid for script function DbToCsvFile)
	881	)))
	882	\|=(% style="width: 160px;" %)HSW1854\|(% style="width:282px" %)High and low word conversion type\|(% style="width:452px" %)(((
	883	* =0: use the old high-low word conversion (default)
	884	* =1: usie the new high-low word conversion
	885	)))
	886	\|=(% style="width: 160px;" %)HSW1855\|(% style="width:282px" %)Screen Lock prompt display control\|(% style="width:452px" %)(((
	887	Control whether the screen lock prompt is displayed,
	888
	889	* =0: display(default value)
	890	* =Other: no display.
	891	)))
	892	\|=(% style="width: 160px;" %)HSW1856\|(% style="width:282px" %)Display map fence drawing status\|(% style="width:452px" %)(((
	893	* =0: no map fence
	894	* =1: The map fence is drawn and the device is inside the fence
	895	* =2: The map fence is drawn and the device is outside the fence
	896	)))
	897	\|=(% style="width: 160px;" %)HSW1857\|(% style="width:282px" %)USB disk download \|(% style="width:452px" %)(((
	898	* =0: download project
	899	* =1: download firmware
	900	* =2: enter the background
	901	)))
	902	\|=(% style="width: 160px;" %)HSW1865\|(% style="width:282px" %)Priority connection to the cloud\|(% style="width:452px" %)(((
	903	* =0: priority Ethernet
	904	* =1: priority WLAN
	905	* =2: priority 4G
	906	)))
	907	\|=(% style="width: 160px;" %)HSW1866\|(% style="width:282px" %)Delete the Lua extension module file\|(% style="width:452px" %)(((
	908	* =0: delete;
	909	* = Others: do not delete
	910	)))
	911	\|=(% style="width: 160px;" %)HSW1867\|(% style="width:282px" %)Reset mode\|(% style="width:452px" %)(((
	912	Monitor address is set during reset of reset switch, whether to cancel reset,
	913
	914	* = 0: yes (default);
	915	* = 1: no
	916	)))
	917	\|=(% style="width: 160px;" %)HSW1868\|(% style="width:282px" %)Double-click or long press the record type table mode\|(% style="width:452px" %)(((
	918	Controls whether the button pops up when double-clicking or long pressing on record type table object
	919
	920	* = 0: yes (default);
	921	* = 1: no
	922	)))
	923	\|=(% style="width: 160px;" %)(((
	924	HSW1869
	925	)))\|(% style="width:282px" %)(((
	926	Dynamic screensaver countdown
	927	)))\|(% style="width:452px" %)(((
	928	Countdown to enter dynamic screensaver effect, unit (S)
	929	)))
	930	\|=(% style="width: 160px;" %)(((
	931	HSW1870
	932	)))\|(% style="width:282px" %)(((
	933	Display or set the dynamic or static IP mode of Ethernet1
	934	)))\|(% style="width:452px" %)(((
	935	HSX1870.0 = 0, Static IP mode
	936
	937	HSX1870.0 = 1, dynamic IP mode
	938	)))
	939	\|=(% style="width: 160px;" %)(((
	940	HSW1871
	941	)))\|(% style="width:282px" %)(((
	942	Confirm the IP, subnet mask, gateway, DNS1, DNS2, and dynamic static IP settings for Ethernet1
	943	)))\|(% style="width:452px" %)(((
	944	~= 1, confirm the setting (i.e., after modifying IP-related information, set this address to 1, representing confirmation of the modification, after which it will be reset to 0)
	945	)))
	946	\|=(% style="width: 160px;" %)(((
	947	HSW1872
	948	)))\|(% colspan="1" rowspan="8" style="width:282px" %)(((
	949	①Display and modify DNS1 and DNS2 of Ethernet1
	950
	951	②Related registers can be read and written mode (only static IP mode can be written)
	952	)))\|(% style="width:452px" %)(((
	953	Ethernet1 Local DNS1 address high byte 1
	954	)))
	955	\|=(% style="width: 160px;" %)(((
	956	HSW1873
	957	)))\|(% style="width:452px" %)Ethernet1 Local DNS1 address high byte 2
	958	\|=(% style="width: 160px;" %)(((
	959	HSW1874
	960	)))\|(% style="width:452px" %)Ethernet1 Local DNS1 address high byte 3
	961	\|=(% style="width: 160px;" %)(((
	962	HSW1875
	963	)))\|(% style="width:452px" %)Ethernet1 Local DNS1 address high byte 4
	964	\|=(% style="width: 160px;" %)(((
	965	HSW1876
	966	)))\|(% style="width:452px" %)Ethernet1 Local DNS2 address high byte 1
	967	\|=(% style="width: 160px;" %)(((
	968	HSW1877
	969	)))\|(% style="width:452px" %)Ethernet1 Local DNS2 address high byte 2
	970	\|=(% style="width: 160px;" %)(((
	971	HSW1878
	972	)))\|(% style="width:452px" %)Ethernet1 Local DNS2 address high byte 3
	973	\|=(% style="width: 160px;" %)(((
	974	HSW1879
	975	)))\|(% style="width:452px" %)Ethernet1 Local DNS2 address high byte 4
	976	\|=(% style="width: 160px;" %)HSW1890\|(% colspan="1" style="width:282px" %)Enable refresh current network signal\|(% style="width:452px" %)(((
	977	* =1: Refresh the network signal once after triggered (This register will be automatically reset after triggered, only update the signal value once after per 15 seconds, not able to update twice in the short interval)
	978	* =Others: not refresh
	979	)))
	980	\|=(% style="width: 160px;" %)HSW1891\|(% colspan="1" style="width:282px" %)Enable clear cache for screen data \|(% style="width:452px" %)(((
	981	* =1, not clear screen cache when switch language
	982	* =2, trigger clear cache of all screens for once time
	983	* =3, always clear cache of all screen data
	984	)))
	985	\|=(% style="width: 160px;" %)HSW1892\|(% colspan="1" style="width:282px" %)Keyboard key polling interval setting\|(% style="width:452px" %)(((
	986	~=0，50ms；
	987
	988	~=1，40ms；
	989
	990	~=2，30ms；
	991
	992	~=3，20ms；
	993
	994	~=4，10ms；
	995	)))
	996	\|=(% style="width: 160px;" %)HSW1893\|(% colspan="1" style="width:282px" %)Cursor mode switch\|(% style="width:452px" %)(((
	997	~=0, default free mode;
	998
	999	~=1, selected box mode;
	1000
	1001	~=2, selected gray mode;
	1002
	1003	~=3, mouse selected mode;
	1004	)))
	1005	\|=(% style="width: 160px;" %)HSW1894\|(% colspan="1" style="width:282px" %)Enable a specific serial keyboard\|(% style="width:452px" %)(((
	1006	~=1 Enable;
	1007
	1008	~=Other, not enabled;
	1009
	1010	Note: Only valid for initialization, recommended to use in background initialization script;
	1011	)))
	1012	\|=(% style="width: 160px;" %)HSW1895\|(% colspan="1" style="width:282px" %)Controls whether keyboard keys are effective in certain situations\|(% style="width:452px" %)(((
	1013	~=0, by default, the key trigger does not take effect when the screen is off or in screen saver mode;
	1014
	1015	~=1, HSX1895.0=1, the key trigger will also take effect when the screen is off;
	1016
	1017	~=2, HSX1895.1=1, the key trigger will also take effect in screen saver mode;
	1018	)))
	1019	\|=(% style="width: 160px;" %)HSW1903\|(% colspan="1" style="width:282px" %)Check the network cable connection status\|(% style="width:452px" %)If a network cable is detected, it is set to 1; if no network cable is detected, it is set to 0
	1020	\|=(% style="width: 160px;" %)HSW10000~~19999\|(% style="width:282px" %)Power-down storage area\|(% style="width:452px" %)After restart, the data remains
	1021	\|=(% style="width: 160px;" %)HSW10035\|(% rowspan="13" style="width:282px" %)(((
	1022	Note: Valid when Ethernet1 of HMI is plugged into the network cable.
	1023	① When the Ethernet setting is enabled in the project parameters, this register displays the set value.
	1024	② When the Ethernet setting is not enabled in the engineering parameters, the register displays the Ethernet IP automatically acquired by the HMI.
	1025	③ When the HMI is not plugged into the network cable, the register will show 0 whether the engineering parameters are set or not.
	1026	④ IP related registers can be read and written (only static IP mode can be written).
	1027	)))\|(% style="width:452px" %)Local IP address high byte 1
	1028	\|=(% style="width: 160px;" %)HSW10036\|(% style="width:452px" %)Local IP address high byte 2
	1029	\|=(% style="width: 160px;" %)HSW10037\|(% style="width:452px" %)Local IP address high byte 3
	1030	\|=(% style="width: 160px;" %)HSW10038\|(% style="width:452px" %)Local IP address high byte 4
	1031	\|=(% style="width: 160px;" %)HSW10039\|(% style="width:452px" %)Local mask IP address high byte 1
	1032	\|=(% style="width: 160px;" %)HSW10040\|(% style="width:452px" %)Local mask IP address high byte 2
	1033	\|=(% style="width: 160px;" %)HSW10041\|(% style="width:452px" %)Local mask IP address high byte 3
	1034	\|=(% style="width: 160px;" %)HSW10042\|(% style="width:452px" %)Local mask IP address high byte 4
	1035	\|=(% style="width: 160px;" %)HSW10043\|(% style="width:452px" %)Local gateway address high byte 1
	1036	\|=(% style="width: 160px;" %)HSW10044\|(% style="width:452px" %)Local gateway address high byte 2
	1037	\|=(% style="width: 160px;" %)HSW10045\|(% style="width:452px" %)Local gateway address high byte 3
	1038	\|=(% style="width: 160px;" %)HSW10046\|(% style="width:452px" %)Local gateway address high byte 4
	1039	\|=(% style="width: 160px;" %)HSW10047\|(% style="width:452px" %)Local port address
	1040	\|=(% style="width: 160px;" %)HSW10048\|(% rowspan="6" style="width:282px" %)(((
	1041	①Display the MAC code of Ethernet1 NIC
	1042
	1043	(hexadecimal display)
	1044
	1045	②Read-only mode, not modifiable
	1046	)))\|(% style="width:452px" %)Local MAC code high word 1
	1047	\|=(% style="width: 160px;" %)HSW10049\|(% style="width:452px" %)Local MAC code high word 2
	1048	\|=(% style="width: 160px;" %)HSW10050\|(% style="width:452px" %)Local MAC code high word 3
	1049	\|=(% style="width: 160px;" %)HSW10051\|(% style="width:452px" %)Local MAC code high word 4
	1050	\|=(% style="width: 160px;" %)HSW10052\|(% style="width:452px" %)Local MAC code high word 5
	1051	\|=(% style="width: 160px;" %)HSW10053\|(% style="width:452px" %)Local MAC code high word 6
	1052	\|=(% style="width: 160px;" %)HSW10118\|(% colspan="1" rowspan="2" style="width:282px" %)TSAP settings for HMI in the Siemens LOGO! 8 protocol\|(% style="width:452px" %)HMI local TSAP, which corresponds to the remote TSAP of PLC
	1053	\|=(% style="width: 160px;" %)HSW10119\|(% style="width:452px" %)HMI remote TSAP, which corresponds to the local TSAP of PLC
	1054	\|=(% style="width: 160px;" %)HSW10461~~10493\|(% style="width:282px" %)Remote access password\|(% style="width:452px" %)8-character remote access password
	1055	\|=(% style="width: 160px;" %)HSW10494~~10558\|(% style="width:282px" %)Machine ID (Read only)\|(% style="width:452px" %)Machine ID for remote access (read only 64-bit)
	1056	\|=(% style="width: 160px;" %)HSW10576\|(% style="width:282px" %)Save dynamic installment settings\|(% style="width:452px" %)HSX10576.0=1: Save the set dynamic installment information
	1057	\|=(% style="width: 160px;" %)HSW10577\|(% style="width:282px" %)Control address for installment\|(% style="width:452px" %)(((
	1058	* HSX10577.0=0: disable dynamic installment
	1059	* HSX10577.0=1: enable dynamic installment
	1060	* HSX10577.1=0: disable static installment
	1061	* HSX10577.1=1: enable static installment
	1062	)))
	1063	\|=(% style="width: 160px;" %)HSW10578-10583\|(% style="width:282px" %)Password for dynamic installment\|(% style="width:452px" %)Character Input/ Display (length: 6)
	1064	\|=(% style="width: 160px;" %)HSW10584-10586\|(% style="width:282px" %)Expiry time of dynamic installment\|(% style="width:452px" %)Expiry time: YYYYMMDD (Numeric Input/ Display)
	1065	\|=(% style="width: 160px;" %)HSW10587-10589\|(% style="width:282px" %)Last expiry time of dynamic installment\|(% style="width:452px" %)Expiry time: YYYYMMDD (Numeric Input/ Display)
	1066	\|=(% style="width: 160px;" %)HSW10590\|(% style="width:282px" %)Background light time\|(% style="width:452px" %)(((
	1067	Set the light time for background
	1068
	1069	* =0: The screen backlight is always on.
	1070	* =Others: The screen backlight is on for a period of time and then turns off. The length of time is controlled by the value of the register address. Unit: second.
	1071	)))
	1072	\|=(% style="width: 160px;" %)HSW10591\|(% style="width:282px" %)Backlight brightness adjustment\|(% style="width:452px" %)Backlight brightness range: 1 (darkest) ~~ 100 (brightest)
	1073	\|=(% style="width: 160px;" %)HSW10603\|(% style="width:282px" %)Set the printer to print orientation\|(% style="width:452px" %)(((
	1074	Set the print direction:
	1075
	1076	* =1: Forward printing
	1077	* =2: Reverse print
	1078	* =Other: Forward print
	1079	)))
	1080	\|=(% style="width: 160px;" %)HSW10604\|(% style="width:282px" %)Print dot type\|(% style="width:452px" %)(((
	1081	* =1: new firmware 8 dot matrix type
	1082	* =2: new firmware 24 dot matrix type
	1083	* =3: old firmware 8 dot matrix type
	1084	* =4: old firmware 24 dot matrix type
	1085	* =Other: new firmware 8 dot matrix type
	1086	)))
	1087	\|=(% style="width: 160px;" %)HSW10605\|(% style="width:282px" %)Print width of printer\|(% style="width:452px" %)Set the width of the printer to print (in pixels), such as HSW10605 = 394: The printer supports images with a print width of 394 pixels
	1088	\|=(% style="width: 160px;" %)HSW10606\|(% style="width:282px" %)Printer instruction type\|(% style="width:452px" %)(((
	1089	* =1: Graphic print type
	1090	* =2: Dot density printing type
	1091	* =3(Default value): special for EPSON printer
	1092	)))
	1093	\|=(% style="width: 160px;" %)HSW10607\|(% style="width:282px" %)Printer paper cutting function\|(% style="width:452px" %)(((
	1094	* =1: Enable
	1095	* =2: Disable
	1096	)))
	1097	\|=(% style="width: 160px;" %)HSW10608\|(% style="width:282px" %)Print the alignment of the text\|(% style="width:452px" %)(((
	1098	* =1: Left alignment
	1099	* =2: Center alignment
	1100	* =3: Right alignment
	1101	)))
	1102	\|=(% style="width: 160px;" %)HSW10611\|(% style="width:282px" %)Set weconcloud server\|(% style="width:452px" %)(((
	1103	* =0: Select the server configured in "Project Settings"
	1104	* =1: select Server 1
	1105	* =2: select Server 2
	1106	)))
	1107	\|=(% style="width: 160px;" %)HSW11750\|(% style="width:282px" %)Set the language of the Message List prompt (ie series)\|(% style="width:452px" %)(((
	1108	* =0: which is followed the project language
	1109	* =1: English
	1110	* =2: Chinese
	1111	)))
	1112	\|=(% style="width: 160px;" %)HSW11752\|(% style="width:282px" %)Traffic monitoring control\|(% style="width:452px" %)= 1: Enable the flow monitoring function
	1113	~= Other: Disable the flow monitoring function
	1114	\|=(% style="width: 160px;" %)HSW11753\|(% style="width:282px" %)Traffic monitoring network card type\|(% style="width:452px" %)= 0: Ethernet card
	1115	~= 1: 4G
	1116	~= 2: Wi-Fi
	1117	\|=(% style="width: 160px;" %)HSW11754-11755\|(% style="width:282px" %)Historical traffic consumption\|(% style="width:452px" %)The total traffic consumed historically (bytes) [value is an integer]
	1118	\|=(% style="width: 160px;" %)HSW11756\|(% style="width:282px" %)(((
	1119	Access permission restrictions
	1120
	1121	(ig series and 8000/9000 series with -R after system upgrade)
	1122	)))\|(% style="width:452px" %)(((
	1123	* =0: LAN or the external network both OK
	1124	* =1: Only LAN access
	1125	* =2: Only external network can access
	1126	* =3: Close the functions
	1127	)))
	1128	\|=(% style="width: 160px;" %)HSW11757\|(% style="width:282px" %)Enable the valid date of the dynamic installment password\|(% style="width:452px" %)(((
	1129	* =0: Disabled
	1130	* =1: Enable
	1131	)))
	1132	\|=(% style="width: 160px;" %)HSW11758\|(% style="width:282px" %)Enable Screensaver\|(% style="width:452px" %)(((
	1133	* =0: Disabled
	1134	* =1: Enable
	1135	)))
	1136	\|=(% style="width: 160px;" %)HSW11759\|(% style="width:282px" %)Screensaver interval time\|(% style="width:452px" %)(((
	1137	Set the time how long will enter Screensaver (Range 10~~43200s)
	1138	)))
	1139	\|=(% style="width: 160px;" %)HSW11760\|(% style="width:282px" %)Screensaver countdown\|(% style="width:452px" %)Display the countdown to enter the Screensaver, unit: second.
	1140	\|=(% style="width: 160px;" %)HSW11761\|(% style="width:282px" %)Screensaver screen number\|(% style="width:452px" %)Set the screen number for Screensaver
	1141	\|=(% style="width: 160px;" %)(((
	1142	HSW11762
	1143	)))\|(% style="width:282px" %)(((
	1144	Dynamic screensaver control address
	1145	)))\|(% style="width:452px" %)(((
	1146	HSX11762.0=0, initialize with project configuration;
	1147
	1148	HSX11762.0=1, initialize with special register configuration;
	1149
	1150	HSX11762.1=0, disable dynamic screensaver;
	1151
	1152	HSX11762.1=1, enable dynamic screensaver
	1153	)))
	1154	\|=(% style="width: 160px;" %)(((
	1155	HSW11763
	1156	)))\|(% style="width:282px" %)(((
	1157	Waiting time to enter the dynamic screensaver
	1158	)))\|(% style="width:452px" %)(((
	1159	Waiting time when the screen is not operated, range 1~~720 minutes
	1160	)))
	1161	\|=(% style="width: 160px;" %)(((
	1162	HSW11764
	1163	)))\|(% style="width:282px" %)(((
	1164	Animated screensaver animation type
	1165	)))\|(% style="width:452px" %)(((
	1166	~=0: Raster,=1: Blinds,=2: Bubble
	1167	)))
	1168	\|=(% style="width: 160px;" %)HSW11767\|(% style="width:282px" %)Remote screen display adaptation mode switching\|(% style="width:452px" %)=0, default mode, remote full-screen zoom display for horizontal screen projects, remote proportional zoom display for vertical screen projects;
	1169	~=1, full-screen zoom display;
	1170	~=2, proportional zoom display according to screen size ratio;
	1171	~=3, no zoom display according to screen pixels;
	1172	\|=(% style="width: 160px;" %)HSW11773\|(% style="width:282px" %)Automatically log out user control address\|(% style="width:452px" %)=3: that is, HSX11773.0=1, HSX11773.1=1, based on the configuration in the address, enable automatic user logout.
	1173	\|=(% style="width: 160px;" %)HSW11774\|(% style="width:282px" %)Automatic user logout interval\|(% style="width:452px" %)(((
	1174	Range: 1 to 255
	1175
	1176	Unit: Minutes
	1177	)))
3.1	1178	\|=(% style="width: 160px;" %)HSW11815\|(% style="width:282px" %)Sub-screen drag function (For PI10.4 and above)\|(% style="width:452px" %)(((
2.1	1179	* =0: Disabled
	1180	* =1: Enable
	1181	)))
5.1	1182	\|=(% style="width: 160px;" %)HSW11816\|(% style="width:282px" %)Recipe record component button spacing control\|(% style="width:452px" %)This controls the spacing between the top and bottom rows of buttons in all recipe record widgets. The value is the pixel spacing between the buttons. The minimum value is 0, and the maximum value is calculated based on the width of each recipe widget. The spacing plus the button size must not exceed the widget's size. (Note that if the register is greater than the maximum value, the actual spacing is the maximum spacing.)
1.1	1183
	1184	== Serial port communication configuration ==
	1185
	1186	(% class="table-bordered" %)
	1187	\|=(% scope="row" style="width: 102px;" %)Port\|=(% style="width: 173px;" %)Function\|=(% style="width: 122px;" %)Address\|=(% colspan="2" style="width: 506px;" %)Description
	1188	\|(% colspan="1" rowspan="11" style="width:102px" %)COM1\|(% style="width:173px" %)Communication mode\|(% style="width:122px" %)HSW10061\|(% colspan="2" style="width:506px" %)(((
	1189	* =0: RS232
	1190	* =1: RS485
	1191	* =2: RS422
	1192	)))
	1193	\|(% style="width:173px" %)Baud rate\|(% style="width:122px" %)HSW10062\|(% colspan="2" style="width:506px" %)(((
	1194	* =0: 1200
	1195	* =1: 2400
	1196	* =2: 4800
	1197	* =3: 9600
	1198	* =4: 19200
	1199	* =5: 38400
	1200	* =6: 57600
	1201	* =7: 115200
4.1	1202	* =8: 187500
	1203	* =9: 230400
1.1	1204	)))
	1205	\|(% style="width:173px" %)Data bit\|(% style="width:122px" %)HSW10063\|(% colspan="2" style="width:506px" %)(((
	1206	* =7: 7 bit
	1207	* =8: 8 bit
	1208	)))
	1209	\|(% style="width:173px" %)Stop bit\|(% style="width:122px" %)HSW10064\|(% colspan="2" style="width:506px" %)(((
	1210	* =1: 1 bit
	1211	* =2: 2 bit
	1212	)))
	1213	\|(% style="width:173px" %)Check bit\|(% style="width:122px" %)HSW10065\|(% colspan="2" style="width:506px" %)(((
	1214	* =0: None
	1215	* =1: ODD
	1216	* =2: EVEN
	1217	)))
	1218	\|(% style="width:173px" %)Wait timeout\|(% style="width:122px" %)HSW10066\|(% colspan="2" style="width:506px" %)(((
	1219	* Unit: ms.
	1220	* Range: 0 to 30000
	1221	)))
	1222	\|(% style="width:173px" %)reveive timeout\|(% style="width:122px" %)HSW10067\|(% colspan="2" style="width:506px" %)(((
	1223	* Unit: ms.
	1224	* Range: 0 to 30000
	1225	)))
	1226	\|(% style="width:173px" %)Retry time\|(% style="width:122px" %)HSW10068\|(% colspan="2" style="width:506px" %)(((
	1227	* Unit: times.
	1228	* Range: 0 to 100
	1229	)))
	1230	\|(% style="width:173px" %)Retry timeout\|(% style="width:122px" %)HSW10069\|(% colspan="2" style="width:506px" %)(((
	1231	* Unit: s.
	1232	* Range: 0 to 300
	1233	)))
	1234	\|(% style="width:173px" %)HMI station number\|(% style="width:122px" %)HSW10070\|(% colspan="2" style="width:506px" %)
	1235	\|(% style="width:173px" %)PLC station number\|(% style="width:122px" %)HSW10071\|(% colspan="2" style="width:506px" %)
	1236	\|(% colspan="1" rowspan="11" style="width:102px" %)COM1-2\|(% style="width:173px" %)Communication mode\|(% style="width:122px" %)HSW10094\|(% colspan="2" style="width:506px" %)(((
	1237	* =0: RS232
	1238	* =1: RS485
	1239	* =2: RS422
	1240	* =6: RS485-2
	1241	)))
	1242	\|(% style="width:173px" %)Baud rate\|(% style="width:122px" %)HSW10095\|(% colspan="2" style="width:506px" %)(((
	1243	* =0: 1200
	1244	* =1: 2400
	1245	* =2: 4800
	1246	* =3: 9600
	1247	* =4: 19200
	1248	* =5: 38400
	1249	* =6: 57600
	1250	* =7: 115200
	1251	* =8: 230400
	1252	)))
	1253	\|(% style="width:173px" %)Data bit\|(% style="width:122px" %)HSW10096\|(% colspan="2" style="width:506px" %)(((
	1254	* =7: 7 bit
	1255	* =8: 8 bit
	1256	)))
	1257	\|(% style="width:173px" %)Stop bit\|(% style="width:122px" %)HSW10097\|(% colspan="2" style="width:506px" %)(((
	1258	* =1: 1 bit
	1259	* =2: 2 bit
	1260	)))
	1261	\|(% style="width:173px" %)Check bit\|(% style="width:122px" %)HSW10098\|(% colspan="2" style="width:506px" %)(((
	1262	* =0: None
	1263	* =1: ODD
	1264	* =2: EVEN
	1265	)))
	1266	\|(% style="width:173px" %)Wait timeout\|(% style="width:122px" %)HSW10099\|(% colspan="2" style="width:506px" %)(((
	1267	* Unit: ms.
	1268	* Range: 0 to 30000
	1269	)))
	1270	\|(% style="width:173px" %)receive timeout\|(% style="width:122px" %)HSW10100\|(% colspan="2" style="width:506px" %)(((
	1271	* Unit: ms.
	1272	* Range: 0 to 30000
	1273	)))
	1274	\|(% style="width:173px" %)Retry time\|(% style="width:122px" %)HSW10101\|(% colspan="2" style="width:506px" %)(((
	1275	* Unit: times.
	1276	* Range: 0 to 100
	1277	)))
	1278	\|(% style="width:173px" %)Retry timeout\|(% style="width:122px" %)HSW10102\|(% colspan="2" style="width:506px" %)(((
	1279	* Unit: s.
	1280	* Range: 0 to 30
	1281	)))
	1282	\|(% style="width:173px" %)HMI station number\|(% style="width:122px" %)HSW10103\|(% colspan="2" style="width:506px" %)
	1283	\|(% style="width:173px" %)PLC station number\|(% style="width:122px" %)HSW10104\|(% colspan="2" style="width:506px" %)
	1284	\|(% colspan="1" rowspan="11" style="width:102px" %)COM1-3\|(% style="width:173px" %)Communication mode\|(% style="width:122px" %)HSW10120\|(% colspan="2" style="width:506px" %)(((
	1285	* =0: RS232
	1286	* =1: RS485
	1287	* =2: RS422
	1288	* =6: RS485-2
	1289	)))
	1290	\|(% style="width:173px" %)Baud rate\|(% style="width:122px" %)HSW10121\|(% colspan="2" style="width:506px" %)(((
	1291	* =0: 1200
	1292	* =1: 2400
	1293	* =2: 4800
	1294	* =3: 9600
	1295	* =4: 19200
	1296	* =5: 38400
	1297	* =6: 57600
	1298	* =7: 115200
	1299	* =8: 230400
	1300	)))
	1301	\|(% style="width:173px" %)Data bit\|(% style="width:122px" %)HSW10122\|(% colspan="2" style="width:506px" %)(((
	1302	* =7: 7 bit
	1303	* =8: 8 bit
	1304	)))
	1305	\|(% style="width:173px" %)Stop bit\|(% style="width:122px" %)HSW10123\|(% colspan="2" style="width:506px" %)(((
	1306	* =1: 1 bit
	1307	* =2: 2 bit
	1308	)))
	1309	\|(% style="width:173px" %)Check bit\|(% style="width:122px" %)HSW10124\|(% colspan="2" style="width:506px" %)(((
	1310	* =0: None
	1311	* =1: ODD
	1312	* =2: EVEN
	1313	)))
	1314	\|(% style="width:173px" %)Wait timeout\|(% style="width:122px" %)HSW10125\|(% colspan="2" style="width:506px" %)(((
	1315	* Unit: ms.
	1316	* Range: 0 to 30000
	1317	)))
	1318	\|(% style="width:173px" %)receive timeout\|(% style="width:122px" %)HSW10126\|(% colspan="2" style="width:506px" %)(((
	1319	* Unit: ms.
	1320	* Range: 0 to 30000
	1321	)))
	1322	\|(% style="width:173px" %)Retry time\|(% style="width:122px" %)HSW10127\|(% colspan="2" style="width:506px" %)(((
	1323	* Unit: times.
	1324	* Range: 0 to 100
	1325	)))
	1326	\|(% style="width:173px" %)Retry timeout\|(% style="width:122px" %)HSW10128\|(% colspan="2" style="width:506px" %)(((
	1327	* Unit: s.
	1328	* Range: 0 to 30
	1329	)))
	1330	\|(% style="width:173px" %)HMI station number\|(% style="width:122px" %)HSW10129\|(% colspan="2" style="width:506px" %)
	1331	\|(% style="width:173px" %)PLC station number\|(% style="width:122px" %)HSW10130\|(% colspan="2" style="width:506px" %)
	1332	\|(% colspan="1" rowspan="11" style="width:102px" %)COM2\|(% style="width:173px" %)Communication mode\|(% style="width:122px" %)HSW10072\|(% colspan="2" style="width:506px" %)(((
	1333	* =0: RS232
	1334	* =1: RS485
	1335	)))
	1336	\|(% style="width:173px" %)Baud rate\|(% style="width:122px" %)HSW10073\|(% colspan="2" style="width:506px" %)(((
	1337	* =0: 1200
	1338	* =1: 2400
	1339	* =2: 4800
	1340	* =3: 9600
	1341	* =4: 19200
	1342	* =5: 38400
	1343	* =6: 57600
	1344	* =7: 115200
	1345	* =8: 230400
	1346	)))
	1347	\|(% style="width:173px" %)Data bit\|(% style="width:122px" %)HSW10074\|(% colspan="2" style="width:506px" %)(((
	1348	* =7: 7 bit
	1349	* =8: 8 bit
	1350	)))
	1351	\|(% style="width:173px" %)Stop bit\|(% style="width:122px" %)HSW10075\|(% colspan="2" style="width:506px" %)(((
	1352	* =1: 1 bit
	1353	* =2: 2 bit
	1354	)))
	1355	\|(% style="width:173px" %)Check bit\|(% style="width:122px" %)HSW10076\|(% colspan="2" style="width:506px" %)(((
	1356	* =0: None
	1357	* =1: ODD
	1358	* =2: EVEN
	1359	)))
	1360	\|(% style="width:173px" %)Wait timeout\|(% style="width:122px" %)HSW10077\|(% colspan="2" style="width:506px" %)(((
	1361	* Unit: ms.
	1362	* Range: 0 to 30000
	1363	)))
	1364	\|(% style="width:173px" %)receive timeout\|(% style="width:122px" %)HSW10078\|(% colspan="2" style="width:506px" %)(((
	1365	* Unit: ms.
	1366	* Range: 0 to 30000
	1367	)))
	1368	\|(% style="width:173px" %)Retry time\|(% style="width:122px" %)HSW10079\|(% colspan="2" style="width:506px" %)(((
	1369	* Unit: times.
	1370	* Range: 0 to 100
	1371	)))
	1372	\|(% style="width:173px" %)Retry timeout\|(% style="width:122px" %)HSW10080\|(% colspan="2" style="width:506px" %)(((
	1373	* Unit: s.
	1374	* Range: 0 to 30
	1375	)))
	1376	\|(% style="width:173px" %)HMI station number\|(% style="width:122px" %)HSW10081\|(% colspan="2" style="width:506px" %)
	1377	\|(% style="width:173px" %)PLC station number\|(% style="width:122px" %)HSW10082\|(% colspan="2" style="width:506px" %)
	1378	\|(% colspan="1" rowspan="11" style="width:102px" %)COM2-2\|(% style="width:173px" %)Communication mode\|(% style="width:122px" %)HSW10105\|(% colspan="2" style="width:506px" %)(((
	1379	* =0: RS232
	1380	* =1: RS485
	1381	)))
	1382	\|(% style="width:173px" %)Baud rate\|(% style="width:122px" %)HSW10106\|(% colspan="2" style="width:506px" %)(((
	1383	* =0: 1200
	1384	* =1: 2400
	1385	* =2: 4800
	1386	* =3: 9600
	1387	* =4: 19200
	1388	* =5: 38400
	1389	* =6: 57600
	1390	* =7: 115200
	1391	* =8: 230400
	1392	)))
	1393	\|(% style="width:173px" %)Data bit\|(% style="width:122px" %)HSW10107\|(% colspan="2" style="width:506px" %)(((
	1394	* =7: 7 bit
	1395	* =8: 8 bit
	1396	)))
	1397	\|(% style="width:173px" %)Stop bit\|(% style="width:122px" %)HSW10108\|(% colspan="2" style="width:506px" %)(((
	1398	* =1: 1 bit
	1399	* =2: 2 bit
	1400	)))
	1401	\|(% style="width:173px" %)Check bit\|(% style="width:122px" %)HSW10109\|(% colspan="2" style="width:506px" %)(((
	1402	* =0: None
	1403	* =1: ODD
	1404	* =2: EVEN
	1405	)))
	1406	\|(% style="width:173px" %)Wait timeout\|(% style="width:122px" %)HSW10110\|(% colspan="2" style="width:506px" %)(((
	1407	* Unit: ms.
	1408	* Range: 0 to 30000
	1409	)))
	1410	\|(% style="width:173px" %)receive timeout\|(% style="width:122px" %)HSW10111\|(% colspan="2" style="width:506px" %)(((
	1411	* Unit: ms.
	1412	* Range: 0 to 30000
	1413	)))
	1414	\|(% style="width:173px" %)Retry time\|(% style="width:122px" %)HSW10112\|(% colspan="2" style="width:506px" %)(((
	1415	* Unit: times.
	1416	* Range: 0 to 100
	1417	)))
	1418	\|(% style="width:173px" %)Retry timeout\|(% style="width:122px" %)HSW10113\|(% colspan="2" style="width:506px" %)(((
	1419	* Unit: s.
	1420	* Range: 0 to 30
	1421	)))
	1422	\|(% style="width:173px" %)HMI station number\|(% style="width:122px" %)HSW10114\|(% colspan="2" style="width:506px" %)
	1423	\|(% style="width:173px" %)PLC station number\|(% style="width:122px" %)HSW10115\|(% colspan="2" style="width:506px" %)
	1424	\|(% colspan="1" rowspan="11" style="width:102px" %)COM3\|(% style="width:173px" %)Communication mode\|(% style="width:122px" %)HSW10083\|(% colspan="2" style="width:506px" %)(((
	1425	* =1: RS485
	1426	)))
	1427	\|(% style="width:173px" %)Baud rate\|(% style="width:122px" %)HSW10084\|(% colspan="2" style="width:506px" %)(((
	1428	* =0: 1200
	1429	* =1: 2400
	1430	* =2: 4800
	1431	* =3: 9600
	1432	* =4: 19200
	1433	* =5: 38400
	1434	* =6: 57600
	1435	* =7: 115200
	1436	* =8: 230400
	1437	)))
	1438	\|(% style="width:173px" %)Data bit\|(% style="width:122px" %)HSW10085\|(% colspan="2" style="width:506px" %)(((
	1439	* =7: 7 bit
	1440	* =8: 8 bit
	1441	)))
	1442	\|(% style="width:173px" %)Stop bit\|(% style="width:122px" %)HSW10086\|(% colspan="2" style="width:506px" %)(((
	1443	* =1: 1 bit
	1444	* =2: 2 bit
	1445	)))
	1446	\|(% style="width:173px" %)Check bit\|(% style="width:122px" %)HSW10087\|(% colspan="2" style="width:506px" %)(((
	1447	* =0: None
	1448	* =1: ODD
	1449	* =2: EVEN
	1450	)))
	1451	\|(% style="width:173px" %)Wait timeout\|(% style="width:122px" %)HSW10088\|(% colspan="2" style="width:506px" %)(((
	1452	* Unit: ms.
	1453	* Range: 0 to 30000
	1454	)))
	1455	\|(% style="width:173px" %)receive timeout\|(% style="width:122px" %)HSW10089\|(% colspan="2" style="width:506px" %)(((
	1456	* Unit: ms.
	1457	* Range: 0 to 30000
	1458	)))
	1459	\|(% style="width:173px" %)Retry time\|(% style="width:122px" %)HSW10090\|(% colspan="2" style="width:506px" %)(((
	1460	* Unit: times.
	1461	* Range: 0 to 100
	1462	)))
	1463	\|(% style="width:173px" %)Retry timeout\|(% style="width:122px" %)HSW10091\|(% colspan="2" style="width:506px" %)(((
	1464	* Unit: s.
	1465	* Range: 0 to 30
	1466	)))
	1467	\|(% style="width:173px" %)HMI station number\|(% style="width:122px" %)HSW10092\|(% colspan="2" style="width:506px" %)
	1468	\|(% style="width:173px" %)PLC station number\|(% style="width:122px" %)HSW10093\|(% colspan="2" style="width:506px" %)
	1469	\|(% colspan="1" rowspan="2" style="width:102px" %)CAN port\|(% style="width:173px" %)CAN1 baud rate\|(% style="width:122px" %)HSW010116\|(% style="width:299px" %)(((
	1470	Unit: K, the baud rate must be an integer.
	1471
	1472	For example, when the baud rate required is 250000, just enter 250.
	1473	)))\|(% colspan="1" rowspan="2" style="width:218px" %)✎Note: If baud rate has been modified,please wait 5 seconds,then restart the HMI to take effect.
	1474	\|(% style="width:173px" %)CAN2 baud rate\|(% style="width:122px" %)HSW010117\|(% style="width:299px" %)(((
	1475	Unit: K, the baud rate must be an integer.
	1476
	1477	For example, when the baud rate required is 250000, just enter 250.
	1478	)))
	1479
	1480	== Ethernet communication configuration ==
	1481
	1482	(% class="table-bordered" %)
	1483	\|(% style="width:40px" %)No.\|(% style="width:295px" %)Function\|(% style="width:220px" %)Address\|(% style="width:336px" %)Description
	1484	\|(% rowspan="7" style="width:40px" %)1\|(% colspan="1" rowspan="7" style="width:295px" %)Ethernet parameter configuration for communication number 1 in list. Configure those addresses according to connected device. After configuration, wait for 5 seconds and restart the HMI.\|(% style="width:220px" %)HSW11004\|(% style="width:336px" %)Device IP address high word 1
	1485	\|(% style="width:220px" %)HSW11005\|(% style="width:336px" %)Device IP address high word 2
	1486	\|(% style="width:220px" %)HSW11006\|(% style="width:336px" %)Device IP address high word 3
	1487	\|(% style="width:220px" %)HSW11007\|(% style="width:336px" %)Device IP address high word 4
	1488	\|(% style="width:220px" %)HSW11008\|(% style="width:336px" %)Device Port number
	1489	\|(% style="width:220px" %)HSW11009\|(% style="width:336px" %)(((
	1490	~=2 TCP
	1491
	1492	~=3 UDP
	1493	)))
	1494	\|(% style="width:220px" %)HSW11010\|(% style="width:336px" %)Reserved
	1495	\|(% rowspan="7" style="width:40px" %)2\|(% colspan="1" rowspan="7" style="width:295px" %)Ethernet parameter configuration for communication number 2 in list. Configure those addresses according to connected device. After configuration, wait for 5 seconds and restart the HMI.\|(% style="width:220px" %)HSW11011\|(% style="width:336px" %)Device IP address high word 1
	1496	\|(% style="width:220px" %)HSW11012\|(% style="width:336px" %)Device IP address high word 2
	1497	\|(% style="width:220px" %)HSW11013\|(% style="width:336px" %)Device IP address high word 3
	1498	\|(% style="width:220px" %)HSW11014\|(% style="width:336px" %)Device IP address high word 4
	1499	\|(% style="width:220px" %)HSW11015\|(% style="width:336px" %)Device Port number
	1500	\|(% style="width:220px" %)HSW11016\|(% style="width:336px" %)(((
	1501	~=2 TCP
	1502
	1503	~=3 UDP
	1504	)))
	1505	\|(% style="width:220px" %)HSW11017\|(% style="width:336px" %)Reserved
	1506	\|(% style="width:40px" %)…\|(% style="width:295px" %) \|(% style="width:220px" %)…\|(% style="width:336px" %)…
	1507	\|(% rowspan="7" style="width:40px" %)32\|(% colspan="1" rowspan="7" style="width:295px" %)Ethernet parameter configuration for communication number 32 in list. Configure those addresses according to connected device. After configuration, wait for 5 seconds and restart the HMI.\|(% style="width:220px" %)HSW11221\|(% style="width:336px" %)Device IP address high word 1
	1508	\|(% style="width:220px" %)HSW11222\|(% style="width:336px" %)Device IP address high word 2
	1509	\|(% style="width:220px" %)HSW11223\|(% style="width:336px" %)Device IP address high word 3
	1510	\|(% style="width:220px" %)HSW11224\|(% style="width:336px" %)Device IP address high word 4
	1511	\|(% style="width:220px" %)HSW11225\|(% style="width:336px" %)Device Port number
	1512	\|(% style="width:220px" %)HSW11226\|(% style="width:336px" %)(((
	1513	~=2 TCP;
	1514
	1515	~=3 UDP
	1516	)))
	1517	\|(% style="width:220px" %)HSW11227\|(% style="width:336px" %)Reserved
	1518
	1519	(% class="box infomessage" %)
	1520	(((
	1521	✎Note: The number of Ethernet connections supported by different HMI series varies.
	1522	)))
	1523
	1524	== Communication control ==
	1525
	1526	(% class="table-bordered" %)
	1527	\|=(% style="width: 135px;" %)Communication No.\|=(% style="width: 102px;" %)Station No.\|=(% style="width: 185px;" %)Control bit\|=(% style="width: 191px;" %)Communication lamp\|=(% style="width: 271px;" %)Description
	1528	\|(% colspan="1" rowspan="16" style="width:135px" %)1\|(% style="width:102px" %)0~~15\|(% style="width:185px" %)HSX550.0～HSX550.15\|(% style="width:191px" %)HSX558.0～HSX558.15\|(% rowspan="160" style="width:271px" %)Communication number refers to the number in "Communication Port Configuration". A number provides 256 device station numbers. Each station number corresponds to a communication control bit and a communication indicator bit. Registers HSX550.0 to HSX805.15 are used to control the station numbers from 0 to 127, and registers HSX1150.0 to HSX1405.15 are used to control station numbers 128 to 255.
	1529	\|(% style="width:102px" %)16~~31\|(% style="width:185px" %)HSX551.0～HSX551.15\|(% style="width:191px" %)HSX559.0～HSX559.15
	1530	\|(% style="width:102px" %)32~~47\|(% style="width:185px" %)HSX552.0～HSX552.15\|(% style="width:191px" %)HSX560.0～HSX560.15
	1531	\|(% style="width:102px" %)48~~63\|(% style="width:185px" %)HSX553.0～HSX553.15\|(% style="width:191px" %)HSX561.0～HSX561.15
	1532	\|(% style="width:102px" %)64～79\|(% style="width:185px" %)HSX554.0～HSX554.15\|(% style="width:191px" %)HSX562.0～HSX562.15
	1533	\|(% style="width:102px" %)80～95\|(% style="width:185px" %)HSX555.0～HSX555.15\|(% style="width:191px" %)HSX563.0～HSX563.15
	1534	\|(% style="width:102px" %)96～111\|(% style="width:185px" %)HSX556.0～HSX556.15\|(% style="width:191px" %)HSX564.0～HSX564.15
	1535	\|(% style="width:102px" %)112～127\|(% style="width:185px" %)HSX557.0～HSX557.15\|(% style="width:191px" %)HSX565.0～HSX565.15
	1536	\|(% style="width:102px" %)128～143\|(% style="width:185px" %)HSX1150.0～HSX1150.15\|(% style="width:191px" %)HSX1158.0～HSX1158.15
	1537	\|(% style="width:102px" %)144～159\|(% style="width:185px" %)HSX1151.0～HSX1151.15\|(% style="width:191px" %)HSX1159.0～HSX1159.15
	1538	\|(% style="width:102px" %)160～175\|(% style="width:185px" %)HSX1152.0～HSX1152.15\|(% style="width:191px" %)HSX1160.0～HSX1160.15
	1539	\|(% style="width:102px" %)176～191\|(% style="width:185px" %)HSX1153.0～HSX1153.15\|(% style="width:191px" %)HSX1161.0～HSX1161.15
	1540	\|(% style="width:102px" %)192～207\|(% style="width:185px" %)HSX1154.0～HSX1154.15\|(% style="width:191px" %)HSX1162.0～HSX1162.15
	1541	\|(% style="width:102px" %)208～223\|(% style="width:185px" %)HSX1155.0～HSX1155.15\|(% style="width:191px" %)HSX1163.0～HSX1163.15
	1542	\|(% style="width:102px" %)224～239\|(% style="width:185px" %)HSX1156.0～HSX1156.15\|(% style="width:191px" %)HSX1164.0～HSX1164.15
	1543	\|(% style="width:102px" %)240～255\|(% style="width:185px" %)HSX1157.0～HSX1157.15\|(% style="width:191px" %)HSX1165.0～HSX1165.15
	1544	\|(% colspan="1" rowspan="16" style="width:135px" %)2\|(% style="width:102px" %)0～15\|(% style="width:185px" %)HSX566.0～HSX566.15\|(% style="width:191px" %)HSX574.0～HSX574.15
	1545	\|(% style="width:102px" %)16～31\|(% style="width:185px" %)HSX567.0～HSX567.15\|(% style="width:191px" %)HSX575.0～HSX575.15
	1546	\|(% style="width:102px" %)32～47\|(% style="width:185px" %)HSX568.0～HSX568.15\|(% style="width:191px" %)HSX576.0～HSX576.15
	1547	\|(% style="width:102px" %)48～63\|(% style="width:185px" %)HSX569.0～HSX569.15\|(% style="width:191px" %)HSX577.0～HSX577.15
	1548	\|(% style="width:102px" %)64～79\|(% style="width:185px" %)HSX570.0～HSX570.15\|(% style="width:191px" %)HSX578.0～HSX578.15
	1549	\|(% style="width:102px" %)80～95\|(% style="width:185px" %)HSX571.0～HSX571.15\|(% style="width:191px" %)HSX579.0～HSX579.15
	1550	\|(% style="width:102px" %)96～111\|(% style="width:185px" %)HSX572.0～HSX572.15\|(% style="width:191px" %)HSX580.0～HSX580.15
	1551	\|(% style="width:102px" %)112～127\|(% style="width:185px" %)HSX573.0～HSX573.15\|(% style="width:191px" %)HSX581.0～HSX581.15
	1552	\|(% style="width:102px" %)128～143\|(% style="width:185px" %)HSX1166.0～HSX1166.15\|(% style="width:191px" %)HSX1174.0～HSX1174.15
	1553	\|(% style="width:102px" %)144～159\|(% style="width:185px" %)HSX1167.0～HSX1167.15\|(% style="width:191px" %)HSX1175.0～HSX1175.15
	1554	\|(% style="width:102px" %)160～175\|(% style="width:185px" %)HSX1168.0～HSX1168.15\|(% style="width:191px" %)HSX1176.0～HSX1176.15
	1555	\|(% style="width:102px" %)176～191\|(% style="width:185px" %)HSX1169.0～HSX1169.15\|(% style="width:191px" %)HSX1177.0～HSX1177.15
	1556	\|(% style="width:102px" %)192～207\|(% style="width:185px" %)HSX1170.0～HSX1170.15\|(% style="width:191px" %)HSX1178.0～HSX1178.15
	1557	\|(% style="width:102px" %)208～223\|(% style="width:185px" %)HSX1171.0～HSX1171.15\|(% style="width:191px" %)HSX1179.0～HSX1179.15
	1558	\|(% style="width:102px" %)224～239\|(% style="width:185px" %)HSX1172.0～HSX1172.15\|(% style="width:191px" %)HSX1180.0～HSX1180.15
	1559	\|(% style="width:102px" %)240～255\|(% style="width:185px" %)HSX1173.0～HSX1173.15\|(% style="width:191px" %)HSX1181.0～HSX1181.15
	1560	\|(% colspan="1" rowspan="16" style="width:135px" %)3\|(% style="width:102px" %)0～15\|(% style="width:185px" %)HSX582.0～HSX582.15\|(% style="width:191px" %)HSX590.0～HSX590.15
	1561	\|(% style="width:102px" %)16～31\|(% style="width:185px" %)HSX583.0～HSX583.15\|(% style="width:191px" %)HSX591.0～HSX591.15
	1562	\|(% style="width:102px" %)32～47\|(% style="width:185px" %)HSX584.0～HSX584.15\|(% style="width:191px" %)HSX592.0～HSX592.15
	1563	\|(% style="width:102px" %)48～63\|(% style="width:185px" %)HSX585.0～HSX585.15\|(% style="width:191px" %)HSX593.0～HSX593.15
	1564	\|(% style="width:102px" %)64～79\|(% style="width:185px" %)HSX586.0～HSX586.15\|(% style="width:191px" %)HSX594.0～HSX594.15
	1565	\|(% style="width:102px" %)80～95\|(% style="width:185px" %)HSX587.0～HSX587.15\|(% style="width:191px" %)HSX595.0～HSX595.15
	1566	\|(% style="width:102px" %)96～111\|(% style="width:185px" %)HSX588.0～HSX588.15\|(% style="width:191px" %)HSX596.0～HSX596.15
	1567	\|(% style="width:102px" %)112～127\|(% style="width:185px" %)HSX589.0～HSX589.15\|(% style="width:191px" %)HSX597.0～HSX597.15
	1568	\|(% style="width:102px" %)128～143\|(% style="width:185px" %)HSX1182.0～HSX1182.15\|(% style="width:191px" %)HSX1190.0～HSX1190.15
	1569	\|(% style="width:102px" %)144～159\|(% style="width:185px" %)HSX1183.0～HSX1183.15\|(% style="width:191px" %)HSX1191.0～HSX1191.15
	1570	\|(% style="width:102px" %)160～175\|(% style="width:185px" %)HSX1184.0～HSX1184.15\|(% style="width:191px" %)HSX1192.0～HSX1192.15
	1571	\|(% style="width:102px" %)176～191\|(% style="width:185px" %)HSX1185.0～HSX1185.15\|(% style="width:191px" %)HSX1193.0～HSX1193.15
	1572	\|(% style="width:102px" %)192～207\|(% style="width:185px" %)HSX1186.0～HSX1186.15\|(% style="width:191px" %)HSX1194.0～HSX1194.15
	1573	\|(% style="width:102px" %)208～223\|(% style="width:185px" %)HSX1187.0～HSX1187.15\|(% style="width:191px" %)HSX1195.0～HSX1195.15
	1574	\|(% style="width:102px" %)224～239\|(% style="width:185px" %)HSX1188.0～HSX1188.15\|(% style="width:191px" %)HSX1196.0～HSX1196.15
	1575	\|(% style="width:102px" %)240～255\|(% style="width:185px" %)HSX1189.0～HSX1189.15\|(% style="width:191px" %)HSX1197.0～HSX1197.15
	1576	\|(% colspan="1" rowspan="16" style="width:135px" %)4\|(% style="width:102px" %)0～15\|(% style="width:185px" %)HSX598.0～HSX598.15\|(% style="width:191px" %)HSX606.0～HSX606.15
	1577	\|(% style="width:102px" %)16～31\|(% style="width:185px" %)HSX599.0～HSX599.15\|(% style="width:191px" %)HSX607.0～HSX607.15
	1578	\|(% style="width:102px" %)32～47\|(% style="width:185px" %)HSX600.0～HSX600.15\|(% style="width:191px" %)HSX608.0～HSX608.15
	1579	\|(% style="width:102px" %)48～63\|(% style="width:185px" %)HSX601.0～HSX601.15\|(% style="width:191px" %)HSX609.0～HSX609.15
	1580	\|(% style="width:102px" %)64～79\|(% style="width:185px" %)HSX602.0～HSX602.15\|(% style="width:191px" %)HSX610.0～HSX610.15
	1581	\|(% style="width:102px" %)80～95\|(% style="width:185px" %)HSX603.0～HSX603.15\|(% style="width:191px" %)HSX611.0～HSX611.15
	1582	\|(% style="width:102px" %)96～111\|(% style="width:185px" %)HSX604.0～HSX604.15\|(% style="width:191px" %)HSX612.0～HSX612.15
	1583	\|(% style="width:102px" %)112～127\|(% style="width:185px" %)HSX605.0～HSX605.15\|(% style="width:191px" %)HSX613.0～HSX613.15
	1584	\|(% style="width:102px" %)128～143\|(% style="width:185px" %)HSX1198.0～HSX1198.15\|(% style="width:191px" %)HSX1206.0～HSX1206.15
	1585	\|(% style="width:102px" %)144～159\|(% style="width:185px" %)HSX1199.0～HSX1199.15\|(% style="width:191px" %)HSX1207.0～HSX1207.15
	1586	\|(% style="width:102px" %)160～175\|(% style="width:185px" %)HSX1200.0～HSX1200.15\|(% style="width:191px" %)HSX1208.0～HSX1208.15
	1587	\|(% style="width:102px" %)176～191\|(% style="width:185px" %)HSX1201.0～HSX1201.15\|(% style="width:191px" %)HSX1209.0～HSX1209.15
	1588	\|(% style="width:102px" %)192～207\|(% style="width:185px" %)HSX1202.0～HSX1202.15\|(% style="width:191px" %)HSX1210.0～HSX1210.15
	1589	\|(% style="width:102px" %)208～223\|(% style="width:185px" %)HSX1203.0～HSX1203.15\|(% style="width:191px" %)HSX1211.0～HSX1211.15
	1590	\|(% style="width:102px" %)224～239\|(% style="width:185px" %)HSX1204.0～HSX1204.15\|(% style="width:191px" %)HSX1212.0～HSX1212.15
	1591	\|(% style="width:102px" %)240～255\|(% style="width:185px" %)HSX1205.0～HSX1205.15\|(% style="width:191px" %)HSX1213.0～HSX1213.15
	1592	\|(% colspan="1" rowspan="16" style="width:135px" %)5\|(% style="width:102px" %)0～15\|(% style="width:185px" %)HSX614.0～HSX614.15\|(% style="width:191px" %)HSX622.0～HSX622.15
	1593	\|(% style="width:102px" %)16～31\|(% style="width:185px" %)HSX615.0～HSX615.15\|(% style="width:191px" %)HSX623.0～HSX623.15
	1594	\|(% style="width:102px" %)32～47\|(% style="width:185px" %)HSX616.0～HSX616.15\|(% style="width:191px" %)HSX624.0～HSX624.15
	1595	\|(% style="width:102px" %)48～63\|(% style="width:185px" %)HSX617.0～HSX617.15\|(% style="width:191px" %)HSX625.0～HSX625.15
	1596	\|(% style="width:102px" %)64～79\|(% style="width:185px" %)HSX618.0～HSX618.15\|(% style="width:191px" %)HSX626.0～HSX626.15
	1597	\|(% style="width:102px" %)80～95\|(% style="width:185px" %)HSX619.0～HSX619.15\|(% style="width:191px" %)HSX627.0～HSX627.15
	1598	\|(% style="width:102px" %)96～111\|(% style="width:185px" %)HSX620.0～HSX620.15\|(% style="width:191px" %)HSX628.0～HSX628.15
	1599	\|(% style="width:102px" %)112～127\|(% style="width:185px" %)HSX621.0～HSX621.15\|(% style="width:191px" %)HSX629.0～HSX629.15
	1600	\|(% style="width:102px" %)128～143\|(% style="width:185px" %)HSX1214.0～HSX1214.15\|(% style="width:191px" %)HSX1222.0～HSX1222.15
	1601	\|(% style="width:102px" %)144～159\|(% style="width:185px" %)HSX1215.0～HSX1215.15\|(% style="width:191px" %)HSX1223.0～HSX1223.15
	1602	\|(% style="width:102px" %)160～175\|(% style="width:185px" %)HSX1216.0～HSX1216.15\|(% style="width:191px" %)HSX1224.0～HSX1224.15
	1603	\|(% style="width:102px" %)176～191\|(% style="width:185px" %)HSX1217.0～HSX1217.15\|(% style="width:191px" %)HSX1225.0～HSX1225.15
	1604	\|(% style="width:102px" %)192～207\|(% style="width:185px" %)HSX1218.0～HSX1218.15\|(% style="width:191px" %)HSX1226.0～HSX1226.15
	1605	\|(% style="width:102px" %)208～223\|(% style="width:185px" %)HSX1219.0～HSX1219.15\|(% style="width:191px" %)HSX1227.0～HSX1227.15
	1606	\|(% style="width:102px" %)224～239\|(% style="width:185px" %)HSX1220.0～HSX1220.15\|(% style="width:191px" %)HSX1228.0～HSX1228.15
	1607	\|(% style="width:102px" %)240～255\|(% style="width:185px" %)HSX1221.0～HSX1221.15\|(% style="width:191px" %)HSX1229.0～HSX1229.15
	1608	\|(% colspan="1" rowspan="16" style="width:135px" %)6\|(% style="width:102px" %)0～15\|(% style="width:185px" %)HSX630.0～HSX630.15\|(% style="width:191px" %)HSX638.0～HSX638.15
	1609	\|(% style="width:102px" %)16～31\|(% style="width:185px" %)HSX631.0～HSX631.15\|(% style="width:191px" %)HSX639.0～HSX639.15
	1610	\|(% style="width:102px" %)32～47\|(% style="width:185px" %)HSX632.0～HSX632.15\|(% style="width:191px" %)HSX640.0～HSX640.15
	1611	\|(% style="width:102px" %)48～63\|(% style="width:185px" %)HSX633.0～HSX633.15\|(% style="width:191px" %)HSX641.0～HSX641.15
	1612	\|(% style="width:102px" %)64～79\|(% style="width:185px" %)HSX634.0～HSX634.15\|(% style="width:191px" %)HSX642.0～HSX642.15
	1613	\|(% style="width:102px" %)80～95\|(% style="width:185px" %)HSX635.0～HSX635.15\|(% style="width:191px" %)HSX643.0～HSX643.15
	1614	\|(% style="width:102px" %)96～111\|(% style="width:185px" %)HSX636.0～HSX636.15\|(% style="width:191px" %)HSX644.0～HSX644.15
	1615	\|(% style="width:102px" %)112～127\|(% style="width:185px" %)HSX637.0～HSX637.15\|(% style="width:191px" %)HSX645.0～HSX645.15
	1616	\|(% style="width:102px" %)128～143\|(% style="width:185px" %)HSX1230.0～HSX1230.15\|(% style="width:191px" %)HSX1238.0～HSX1238.15
	1617	\|(% style="width:102px" %)144～159\|(% style="width:185px" %)HSX1231.0～HSX1231.15\|(% style="width:191px" %)HSX1239.0～HSX1239.15
	1618	\|(% style="width:102px" %)160～175\|(% style="width:185px" %)HSX1232.0～HSX1232.15\|(% style="width:191px" %)HSX1240.0～HSX1240.15
	1619	\|(% style="width:102px" %)176～191\|(% style="width:185px" %)HSX1233.0～HSX1233.15\|(% style="width:191px" %)HSX1241.0～HSX1241.15
	1620	\|(% style="width:102px" %)192～207\|(% style="width:185px" %)HSX1234.0～HSX1234.15\|(% style="width:191px" %)HSX1242.0～HSX1242.15
	1621	\|(% style="width:102px" %)208～223\|(% style="width:185px" %)HSX1235.0～HSX1235.15\|(% style="width:191px" %)HSX1243.0～HSX1243.15
	1622	\|(% style="width:102px" %)224～239\|(% style="width:185px" %)HSX1236.0～HSX1236.15\|(% style="width:191px" %)HSX1244.0～HSX1244.15
	1623	\|(% style="width:102px" %)240～255\|(% style="width:185px" %)HSX1237.0～HSX1237.15\|(% style="width:191px" %)HSX1245.0～HSX1245.15
	1624	\|(% colspan="1" rowspan="16" style="width:135px" %)7\|(% style="width:102px" %)0～15\|(% style="width:185px" %)HSX646.0～HSX646.15\|(% style="width:191px" %)HSX654.0～HSX654.15
	1625	\|(% style="width:102px" %)16～31\|(% style="width:185px" %)HSX647.0～HSX647.15\|(% style="width:191px" %)HSX655.0～HSX655.15
	1626	\|(% style="width:102px" %)32～47\|(% style="width:185px" %)HSX648.0～HSX648.15\|(% style="width:191px" %)HSX656.0～HSX656.15
	1627	\|(% style="width:102px" %)48～63\|(% style="width:185px" %)HSX649.0～HSX649.15\|(% style="width:191px" %)HSX657.0～HSX657.15
	1628	\|(% style="width:102px" %)64～79\|(% style="width:185px" %)HSX650.0～HSX650.15\|(% style="width:191px" %)HSX658.0～HSX658.15
	1629	\|(% style="width:102px" %)80～95\|(% style="width:185px" %)HSX651.0～HSX651.15\|(% style="width:191px" %)HSX659.0～HSX659.15
	1630	\|(% style="width:102px" %)96～111\|(% style="width:185px" %)HSX652.0～HSX652.15\|(% style="width:191px" %)HSX660.0～HSX660.15
	1631	\|(% style="width:102px" %)112～127\|(% style="width:185px" %)HSX653.0～HSX653.15\|(% style="width:191px" %)HSX661.0～HSX661.15
	1632	\|(% style="width:102px" %)128～143\|(% style="width:185px" %)HSX1246.0～HSX1246.15\|(% style="width:191px" %)HSX1254.0～HSX1254.15
	1633	\|(% style="width:102px" %)144～159\|(% style="width:185px" %)HSX1247.0～HSX1247.15\|(% style="width:191px" %)HSX1255.0～HSX1255.15
	1634	\|(% style="width:102px" %)160～175\|(% style="width:185px" %)HSX1248.0～HSX1248.15\|(% style="width:191px" %)HSX1256.0～HSX1256.15
	1635	\|(% style="width:102px" %)176～191\|(% style="width:185px" %)HSX1249.0～HSX1249.15\|(% style="width:191px" %)HSX1257.0～HSX1257.15
	1636	\|(% style="width:102px" %)192～207\|(% style="width:185px" %)HSX1250.0～HSX1250.15\|(% style="width:191px" %)HSX1258.0～HSX1258.15
	1637	\|(% style="width:102px" %)208～223\|(% style="width:185px" %)HSX1251.0～HSX1251.15\|(% style="width:191px" %)HSX1259.0～HSX1259.15
	1638	\|(% style="width:102px" %)224～239\|(% style="width:185px" %)HSX1252.0～HSX1252.15\|(% style="width:191px" %)HSX1260.0～HSX1260.15
	1639	\|(% style="width:102px" %)240～255\|(% style="width:185px" %)HSX1253.0～HSX1253.15\|(% style="width:191px" %)HSX1261.0～HSX1261.15
	1640	\|(% colspan="1" rowspan="16" style="width:135px" %)8\|(% style="width:102px" %)0～15\|(% style="width:185px" %)HSX662.0～HSX662.15\|(% style="width:191px" %)HSX670.0～HSX670.15
	1641	\|(% style="width:102px" %)16～31\|(% style="width:185px" %)HSX663.0～HSX663.15\|(% style="width:191px" %)HSX671.0～HSX671.15
	1642	\|(% style="width:102px" %)32～47\|(% style="width:185px" %)HSX664.0～HSX664.15\|(% style="width:191px" %)HSX672.0～HSX672.15
	1643	\|(% style="width:102px" %)48～63\|(% style="width:185px" %)HSX665.0～HSX665.15\|(% style="width:191px" %)HSX673.0～HSX673.15
	1644	\|(% style="width:102px" %)64～79\|(% style="width:185px" %)HSX666.0～HSX666.15\|(% style="width:191px" %)HSX674.0～HSX674.15
	1645	\|(% style="width:102px" %)80～95\|(% style="width:185px" %)HSX667.0～HSX667.15\|(% style="width:191px" %)HSX675.0～HSX675.15
	1646	\|(% style="width:102px" %)96～111\|(% style="width:185px" %)HSX668.0～HSX668.15\|(% style="width:191px" %)HSX676.0～HSX676.15
	1647	\|(% style="width:102px" %)112～127\|(% style="width:185px" %)HSX669.0～HSX669.15\|(% style="width:191px" %)HSX677.0～HSX677.15
	1648	\|(% style="width:102px" %)128～143\|(% style="width:185px" %)HSX1262.0～HSX1262.15\|(% style="width:191px" %)HSX1270.0～HSX1270.15
	1649	\|(% style="width:102px" %)144～159\|(% style="width:185px" %)HSX1263.0～HSX1263.15\|(% style="width:191px" %)HSX1271.0～HSX1271.15
	1650	\|(% style="width:102px" %)160～175\|(% style="width:185px" %)HSX1264.0～HSX1264.15\|(% style="width:191px" %)HSX1272.0～HSX1272.15
	1651	\|(% style="width:102px" %)176～191\|(% style="width:185px" %)HSX1265.0～HSX1265.15\|(% style="width:191px" %)HSX1273.0～HSX1273.15
	1652	\|(% style="width:102px" %)192～207\|(% style="width:185px" %)HSX1266.0～HSX1266.15\|(% style="width:191px" %)HSX1274.0～HSX1274.15
	1653	\|(% style="width:102px" %)208～223\|(% style="width:185px" %)HSX1267.0～HSX1267.15\|(% style="width:191px" %)HSX1275.0～HSX1275.15
	1654	\|(% style="width:102px" %)224～239\|(% style="width:185px" %)HSX1268.0～HSX1268.15\|(% style="width:191px" %)HSX1276.0～HSX1276.15
	1655	\|(% style="width:102px" %)240～255\|(% style="width:185px" %)HSX1269.0～HSX1269.15\|(% style="width:191px" %)HSX1277.0～HSX1277.15
	1656	\|(% rowspan="4" style="width:135px" %)9\|(% style="width:102px" %)0~~15\|(% style="width:185px" %)HSX678.0~~678.15\|(% style="width:191px" %)HSX686.0~~686.15
	1657	\|(% style="width:102px" %)16~~31\|(% style="width:185px" %)HSX679.0~~679.15\|(% style="width:191px" %)HSX687.0~~687.15
	1658	\|(% style="width:102px" %)32~~47\|(% style="width:185px" %)HSX680.0~~680.15\|(% style="width:191px" %)HSX688.0~~688.15
	1659	\|(% style="width:102px" %)48~~63\|(% style="width:185px" %)HSX681.0~~681.15\|(% style="width:191px" %)HSX689.0~~689.15
	1660	\|(% rowspan="4" style="width:135px" %)10\|(% style="width:102px" %)0~~15\|(% style="width:185px" %)HSX694.0~~694.15\|(% style="width:191px" %)HSX702.0~~702.15
	1661	\|(% style="width:102px" %)16~~31\|(% style="width:185px" %)HSX695.0~~695.15\|(% style="width:191px" %)HSX703.0~~703.15
	1662	\|(% style="width:102px" %)32~~47\|(% style="width:185px" %)HSX696.0~~696.15\|(% style="width:191px" %)HSX704.0~~704.15
	1663	\|(% style="width:102px" %)48~~63\|(% style="width:185px" %)HSX697.0~~697.15\|(% style="width:191px" %)HSX705.0~~705.15
	1664	\|(% rowspan="4" style="width:135px" %)11\|(% style="width:102px" %)0~~15\|(% style="width:185px" %)HSX710.0~~710.15\|(% style="width:191px" %)HSX718.0~~718.15
	1665	\|(% style="width:102px" %)16~~31\|(% style="width:185px" %)HSX711.0~~711.15\|(% style="width:191px" %)HSX719.0~~719.15
	1666	\|(% style="width:102px" %)32~~47\|(% style="width:185px" %)HSX712.0~~712.15\|(% style="width:191px" %)HSX720.0~~720.15
	1667	\|(% style="width:102px" %)48~~63\|(% style="width:185px" %)HSX713.0~~713.15\|(% style="width:191px" %)HSX721.0~~721.15
	1668	\|(% rowspan="4" style="width:135px" %)12\|(% style="width:102px" %)0~~15\|(% style="width:185px" %)HSX726.0~~726.15\|(% style="width:191px" %)HSX734.0~~734.15
	1669	\|(% style="width:102px" %)16~~31\|(% style="width:185px" %)HSX727.0~~727.15\|(% style="width:191px" %)HSX735.0~~735.15
	1670	\|(% style="width:102px" %)32~~47\|(% style="width:185px" %)HSX728.0~~728.15\|(% style="width:191px" %)HSX736.0~~736.15
	1671	\|(% style="width:102px" %)48~~63\|(% style="width:185px" %)HSX729.0~~729.15\|(% style="width:191px" %)HSX737.0~~737.15
	1672	\|(% rowspan="4" style="width:135px" %)13\|(% style="width:102px" %)0~~15\|(% style="width:185px" %)HSX742.0~~742.15\|(% style="width:191px" %)HSX750.0~~750.15
	1673	\|(% style="width:102px" %)16~~31\|(% style="width:185px" %)HSX743.0~~743.15\|(% style="width:191px" %)HSX751.0~~751.15
	1674	\|(% style="width:102px" %)32~~47\|(% style="width:185px" %)HSX744.0~~744.15\|(% style="width:191px" %)HSX752.0~~752.15
	1675	\|(% style="width:102px" %)48~~63\|(% style="width:185px" %)HSX745.0~~745.15\|(% style="width:191px" %)HSX753.0~~753.15
	1676	\|(% rowspan="4" style="width:135px" %)14\|(% style="width:102px" %)0~~15\|(% style="width:185px" %)HSX758.0~~758.15\|(% style="width:191px" %)HSX766.0~~766.15
	1677	\|(% style="width:102px" %)16~~31\|(% style="width:185px" %)HSX759.0~~759.15\|(% style="width:191px" %)HSX767.0~~767.15
	1678	\|(% style="width:102px" %)32~~47\|(% style="width:185px" %)HSX760.0~~760.15\|(% style="width:191px" %)HSX768.0~~768.15
	1679	\|(% style="width:102px" %)48~~63\|(% style="width:185px" %)HSX761.0~~761.15\|(% style="width:191px" %)HSX769.0~~769.15
	1680	\|(% rowspan="4" style="width:135px" %)15\|(% style="width:102px" %)0~~15\|(% style="width:185px" %)HSX774.0~~774.15\|(% style="width:191px" %)HSX782.0~~782.15
	1681	\|(% style="width:102px" %)16~~31\|(% style="width:185px" %)HSX775.0~~775.15\|(% style="width:191px" %)HSX783.0~~783.15
	1682	\|(% style="width:102px" %)32~~47\|(% style="width:185px" %)HSX776.0~~776.15\|(% style="width:191px" %)HSX784.0~~784.15
	1683	\|(% style="width:102px" %)48~~63\|(% style="width:185px" %)HSX777.0~~777.15\|(% style="width:191px" %)HSX785.0~~785.15
	1684	\|(% rowspan="4" style="width:135px" %)16\|(% style="width:102px" %)0~~15\|(% style="width:185px" %)HSX790.0~~790.15\|(% style="width:191px" %)HSX798.0~~798.15
	1685	\|(% style="width:102px" %)16~~31\|(% style="width:185px" %)HSX791.0~~791.15\|(% style="width:191px" %)HSX799.0~~799.15
	1686	\|(% style="width:102px" %)32~~47\|(% style="width:185px" %)HSX792.0~~792.15\|(% style="width:191px" %)HSX800.0~~800.15
	1687	\|(% style="width:102px" %)48~~63\|(% style="width:185px" %)HSX793.0~~793.15\|(% style="width:191px" %)HSX801.0~~801.15

Wiki source code of 13 HMI Internal Registers

Navigation

Table of Contents