Skip to Content

Wiki source code of 13 HMI Internal Registers

Last modified by xingzhi lin on 2025/10/30 15:10
Show last authors
1 = **Introduction** =
2
3 HMI provide four types of HMI address for user. You can use them as temporary variables of the program. The use is consistent with the way access to the PLC register. You could also reference through the address, PIStudio provides three types of such memory.
4
5 *HSW, HDW, HUW, HAW are word address, HSX, HDX, HUX, HAX are bit address.
6
7 * **System data area (HSW): **A special register defined by the system.
8 * **Data storage area (HDW/HDX): **Users store user data.
9 * **System data area (HUW): **A special register defined by the system.
10 * **System Data (HAW)**: System register used for power-off save.
11 * **Recipe index area (RPW): **System register used for recipe index.
12
13 HMI internal registers are divided into bit address and word address, which can be accessed in two ways (take HDW as an example).
14
15 * Access as word with the prefix "HDW".
16 ** HDW0 means the 1st word of system data area. HDW1 means the 2nd word of system data area.
17 * Access as bit with the prefix "HDX".  The number before "." i".  The number before Access in bit with the prefix "HD".  The number before Access in bit with the prefix "HDX". The number before "." indicates the number of the word. The number after "." indicates the bit number of the word.
18 ** HDX1020.12 means to access the system data area in bit mode, the specific location is the 13th bit of the 1020 word.
19
20 (% class="box infomessage" %)
21 (((
22 **✎Note:**
23
24 * Addresses in HDX are the bits from words in HDW, so be careful when using addresses. For example, HDX1020.12 is the 13th bit to access the 1020 word. The value of this bit is the same as that of the word accessed through HDW001020. The 13th bit of this word is actually the same bit as HDX1020.12.
25 * The address of the bit address HDX is with a decimal point while word addresses are integers.
26 )))
27
28 = Address ranges table =
29
30 (% style="text-align:center" %)
31 [[image:6.png]]
32
33 = **Data storage area (HDW/HDX)** =
34
35 It is used to save the temporary data of project.
36
37 1. Access as word, and serial number range is from HDW0 to HDW299999.
38 1. Access as bit, and serial number range is from HDX0.0 to HDX299999.15.
39
40 = **Power-down save area (HAW/HAX)** =
41
42 It is system registers used for power-off save.
43
44 1. Access as word, and serial number range is from HAW0 to HAW199999.
45 1. Access as bit, and serial number range is from HAX0.0 to HAX199999.15.
46
47 (% class="box infomessage" %)
48 (((
49 **✎Note:**
50
51 * HAW/HAX is power-down retention. The register of this type is able to save the data before the power-down.
52 * To avoid possible device failure, do not immediately power off and reboot when configuring the power-down save addre
53 )))
54
55 = **Recipe index area (RPW)** =
56
57 It is system recipe data power-off save register. The range is from RPW000000 to RPW990450.
58
59 (% class="box infomessage" %)
60 (((
61 **✎Note:**
62
63 * RPW is power-down retention. The register of this type is able to save the data before the power-down.
64 * To avoid possible device failure, do not immediately power off and reboot when configuring the power-down save addre
65 )))
66
67 = **Single user data area (HUW/HUX)** =
68
69 It is used for system special registers (reserved by system).
70
71 1. Access as word, and serial number range is from HUW0 to HUW1599.
72 1. Access as bit, and serial number range is from HUX0.0 to HUX1599.15.
73
74 (% class="box infomessage" %)
75 (((
76 **✎Note:**
77
78 * HUW/HUX is a system special register, so please check the system special register list during use. Please use the address specified in the table and do not use the address which is not mentioned in the table.
79 )))
80
81 (% class="table-bordered" %)
82 |=**Special register address**|=**Description**|=**Function**
83 |=HUW0|Screen switch|A single terminal controls the screen switching, and all terminals do not affect each other.
84 |=HUW110~~HUW119|(% rowspan="26" %)Addresses of the built-in keyboard|The T9 input method stores the selected seria number length
85 |=HUW120~~HUW129|The T9 input method stores the selected Chinese Pinyin length
86 |=HUW135|Input method: first input
87 |=HUW136|Button: T9 Chinese Pinyin page
88 |=HUW137|Button: T9 Chinese characters page
89 |=HUW138|Button: symbol
90 |=HUW139|Button: switch
91 |=HUW140|Button: Chinese characters 1
92 |=HUW142|Button: Chinese characters 2
93 |=HUW144|Button: Chinese characters 3
94 |=HUW146|Button: Chinese characters 4
95 |=HUW148|Button: Chinese characters 5
96 |=HUW150|Button: Chinese characters 6
97 |=HUW152|Button: Chinese characters 7
98 |=HUW154|Button: Chinese characters 8
99 |=HUW156|Button: Chinese characters 9
100 |=HUW158|Button: Chinese characters 10
101 |=HUW160~~HUW169|Button: Chinese Pinyin 1
102 |=HUW170~~HUW179|Button: Chinese Pinyin 2
103 |=HUW180~~HUW189|Button: Chinese Pinyin 3
104 |=HUW190~~HUW199|Button: Chinese Pinyin 4
105 |=HUW200~~HUW699|Input method cache length
106 |=HUW700~~HUW749|Minimum value of the input method
107 |=HUW750~~HUW799|Maximum value of the input method
108 |=HUW800|Case switching of the input method
109 |=HUW801~~HUW900|Input method format cache length
110 |=HUW1000|(% rowspan="12" %)Addresses of user permission|OK (Sign in)
111 |=HUW1001|Result of operation
112 |=HUW1002~~1005|Old password
113 |=HUW1006~~1009|New password
114 |=HUW1010~~1013|Confirm password
115 |=HUW1014~~1029|New user name
116 |=HUW1030~~1157|States information of user permission
117 |=HUW1158~~1335|User name (Only or drop-down list object)
118 |=HUW1336~~1345|User name description or note
119 |=HUW1347|Hidden function configurations
120 |=HUW1348|Permission settings
121 |=HUW1349|Current user name
122 |=HUW1382|User sign in way|(((
123 * 0: Select the user name from drop-down list object for signing in
124 * 1: Enter the user name in Character Input/Display object for signing in (HUW1014)
125 )))
126 |=HUW1400|Time interval from last operation|(((
127 Shows how long the touch screen has not been clicked, in seconds. 32-bit unsigned integer
128
129 **✎Note:** Clicking by different users will only clear the corresponding register of the currently operating terminal, and the registers on other terminals (such as mobile phones, computers) will not be cleared.
130 )))
131 |=HUW1402|Keyboard note|It saves the text information of the keyboard notes when clicking object(HUW1402-HUW1433)
132 |=HUW1436|Current object level|Indicate current object security level
133 |=HUW1502|Touch status prompt|(((
134 * 0: Not touching
135 * 1: Touching
136 )))
137 |=HUW1503|The current user's group prompt|(((
138 A bit represents one of the groups. The administrator is bit 0, group 0 is bit 1, and group 1 is bit 2 and so on.
139
140 For example:
141
142 * HUW1503.0=0 (administrator)
143 * HUW1503.1=1 (group 0)
144 * HUW1503.2=1 (group 1)
145 * HUW1503.3=0 (group 2)
146
147 This means the current user has the permissions of groups 0 and 1, but not administrator or group 2.
148 )))
149 |=HSW1908|Total available user storage|Displays total available user storage (64-bit floating-point, unit: MB).
150 |=HSW1912|Remaining available user storage|Displays remaining available user storage (64-bit floating-point, unit: MB).
151 |=HSW1921|Touch status indicator|(((
152 * 0: Not touching
153 * 1: Touching
154 )))
155 |=HSW1923|Exclusive mode switch|(((
156 * 0: Disable exclusive mode
157 * 1: Enable exclusive mode
158 )))
159 |=HSW11773|Control auto user logout |(((
160 Controls the enable state of auto user logout.
161
162 * HSX11773.0: =0 Follow project configuration
163 * HSX11773.0: =1 Follow address configuration
164 * HSX11773.1: =0 Disable auto logout
165 * HSX11773.1: =1 Enable auto logout
166 )))
167 |=HSW11774|Auto user logout waiting time|Sets the waiting time before automatic logout (1–255 minutes).
168 |=(((
169 ==== **HSW11775** ====
170 )))|Enable NTP time synchronization|(((
171 * 1: Enable NTP
172 * 0: Disable NTP
173 )))
174 |=HSW11776|Immediate time synchronization|Perform immediate NTP sync after device startup.
175 |=HSW11777~~11780|Primary time server IP (required when NTP is enabled)|Each register represents one byte of the IP address (high to low).
176 |=HSW11781~~11784|Second time server IP (optional)|Each register represents one byte of the IP address (high to low).
177 |=HSW11785~~11788|Third time server IP (optional)|Each register represents one byte of the IP address (high to low).
178 |=HSW11789~~11792|Fourth time server IP (optional)|Each register represents one byte of the IP address (high to low).
179 |=HSW11793|Time synchronization period|(((
180
181
182 High byte of time synchronization period
183 )))
184 |=HSW11794|Time synchronization period|(((
185
186
187 Low byte of time synchronization period
188 )))
189 |=HSW11795|Enable daylight saving time (DST)|(((
190 * 1: Enable DST
191 * 0: Disable DST
192 )))
193 |=HSW11796|Time adjustment|Hour adjustment
194 |=HSW11797|Time adjustment|Minute adjustment
195 |=HSW11798~~11807|DST start and end configuration|(((
196 * Start month: 1–12
197 * Week of month: 1–5
198 * Day of week: 0–6 (0 = Sunday)
199 * Hour: 0–23
200 * Minute: 0–59
201 * End month/week/day/hour/minute follow the same format.
202 )))
203 |=HSW11808|Whether currently in daylight saving time|(((
204 * 1: In DST
205 * 0: Not in DST
206 )))
207 |=HSW11811|Watchdog mode configuration|(((
208 * 1: Register mode
209 * 0: Project mode
210 )))
211 |=HSW11812|Enable watchdog|(((
212 * 1: Enable
213 * 0: Disable
214 )))
215 |=HSW11813|Watchdog timeout setting|Unit: second
216 |=HSW11814|Trigger watchdog|=0 Reboot
217
218 = **Special data area (HSW/HSX)** =
219
220 It is used for system special registers (reserved by system).
221
222 1. Access as word, and serial number range is from HSW0 to HSW49999. (HSW10000 to HSW19999 are the power-off storage areas)
223 1. Access as bit, and serial number range is from HSX0.0 to HSX49999.15.
224
225 (% class="box infomessage" %)
226 (((
227 **✎Note:**
228
229 * HSW / HSX are a system special register, so please check the system special register list during use. Please use the address specified in the table and do not use the address which is not mentioned in the table.
230 * To avoid possible device failure, do not immediately power off and reboot when configuring the power-down save address.
231 )))
232
233 (% class="table-bordered" style="margin-left:auto; margin-right:auto; width:1024px" %)
234 |=(% scope="row" style="width: 160px;" %)**Address**|=(% style="width: 282px;" %)**Function**|=(% style="width: 452px;" %)**Description**
235 |=(% style="width: 160px;" %)HSW0|(% style="width:282px" %)Language switch|(% style="width:452px" %)Multiple language could be set in the project, HMI support maximum 8 languages. (Power-down save supported)
236 |=(% style="width: 160px;" %)HSW1|(% style="width:282px" %)Beep frequency (Only valid in HMI V1.0 System)|(% style="width:452px" %)Frequency range: 0~~4000
237 |=(% style="width: 160px;" %)HSW2|(% style="width:282px" %)Beep volume (Only valid in HMI V1.0 System)|(% style="width:452px" %)Volume range: 0~~80
238 |=(% style="width: 160px;" %)HSW3|(% style="width:282px" %)Beep time|(% style="width:452px" %)Unit: ms
239 |=(% style="width: 160px;" %)HSW4|(% style="width:282px" %)Beep whether enable or not|(% style="width:452px" %)(((
240 * =0: Enable.
241 * =1: Disable.
242 )))
243 |=(% style="width: 160px;" %)HSW5|(% style="width:282px" %)(((
244 Alarm indicator
245 )))|(% style="width:452px" %)(((
246 * =0: Currently no alarm or all alarms have been off.
247 * =1: Currently alarm(s) still keep in on.
248 )))
249 |=(% style="width: 160px;" %)HSW6~~HSW7|(% style="width:282px" %)Number of alarms|(% style="width:452px" %)The number of alarm (it also includes the records of alarm confirmed)
250 |=(% style="width: 160px;" %)HSW8|(% style="width:282px" %)Number of unconfirmed history alarm|(% style="width:452px" %)The number of unconfirmed history alarm
251 |=(% style="width: 160px;" %)HSW9|(% style="width:282px" %)Time out prompt|(% style="width:452px" %)(((
252 * =0: Enable
253 * =1: Disable
254 )))
255 |=(% style="width: 160px;" %)HSW12|(% style="width:282px" %)Screen swicth|(% style="width:452px" %)(((
256 * = 0: Only HSW control the screen switch, and the sreens of all users will switch.
257 * = 1: Only HUW control the screen switch, and all users do not affect each other.
258 )))
259 |=(% style="width: 160px;" %)HSW13|(% style="width:282px" %)Screen switch register|(% style="width:452px" %)Equal to different values, the screen jumps to the corresponding screen number of the screen.
260 |=(% style="width: 160px;" %)HSW24|(% style="width:282px" %)Reboot HMI|=(% style="width: 452px;" %)1: Reboot
261 |=(% style="width: 160px;" %)HSW28|(% style="width:282px" %)Local time: year|(% style="width:452px" %)Range: 0~~9999 (system reserved)
262 |=(% style="width: 160px;" %)HSW29|(% style="width:282px" %)Local time: month|(% style="width:452px" %)Range: 01~~12 (system reserved)
263 |=(% style="width: 160px;" %)HSW30|(% style="width:282px" %)Local time: day|(% style="width:452px" %)Range: 01~~31 (system reserved)
264 |=(% style="width: 160px;" %)HSW31|(% style="width:282px" %)Local time: hour|(% style="width:452px" %)Range: 0~~23 (system reserved)
265 |=(% style="width: 160px;" %)HSW32|(% style="width:282px" %)Local time: minute|(% style="width:452px" %)Range: 0~~59 (system reserved)
266 |=(% style="width: 160px;" %)HSW33|(% style="width:282px" %)Local time: second|(% style="width:452px" %)Range: 0~~59 (system reserved)
267 |=(% style="width: 160px;" %)HSW34|(% style="width:282px" %)Local time: week|(% style="width:452px" %)(((
268 * =0: Sunday.
269 * =1: Monday.
270 * =2: Tuesday.
271 * =3: Wednesday.
272 * =4: Thursday.
273 * =5: Friday.
274 * =6: Saturday.
275 )))
276 |=(% style="width: 160px;" %)HSW39|(% style="width:282px" %)Beep type(Only valid in HMI V2.0 System)|(% style="width:452px" %)Type range: 1-5, Default is 1.
277 |=(% style="width: 160px;" %)HSW134|(% style="width:282px" %)(((
278 Whether the Script is read through
279
280
281 )))|(% style="width:452px" %)(((
282 (% class="box infomessage" %)
283 (((
284 **✎Note:** If want to read-only or write-only, please enable this settings.
285 )))
286
287 * =0: Read from HMI cache(Default)
288 * =1: Read from PLC directly
289 )))
290 |=(% style="width: 160px;" %)HSW135|(% style="width:282px" %)Confirm installment password|(% style="width:452px" %)Confirm button for installment password
291 |=(% style="width: 160px;" %)HSW151|(% style="width:282px" %)Installment due|(% style="width:452px" %)Number of days to installment due
292 |=(% style="width: 160px;" %)HSW185~~200|(% style="width:282px" %)Installment password|(% style="width:452px" %)Enter installment password
293 |=(% style="width: 160px;" %)HSW242|(% style="width:282px" %)(((
294 Prompt result of recipe operation
295
296 * Upload: Data is written from address to file
297 * Download: Data is written from a file to an address
298 )))|(% style="width:452px" %)(((
299 * =1: Download recipe, start
300 * =2: Download recipe, execution error
301 * =3: Download recipe, files don't exist
302 * =4: Download recipe, members don't exist
303 * =5: Download recipe, groups don't exist
304 * =6: Download recipe, success
305 * =7: Upload recipe, start
306 * =8: Upload recipe, execution error
307 * =9: Upload recipe, files don't exist
308 * =10: Upload recipe, members don't exist
309 * =11: Upload recipe, groups don't exist
310 * =12: Upload recipe, success
311 * =13: Insert recipe, start
312 * =14: Insert recipe, execution error
313 * =15: Insert recipe, files don't exist
314 * =16: Insert recipe, members don't exist
315 * =17: Insert recipe, groups don't exist
316 * =18: Insert recipe, success
317 * =19: Delete recipe, start
318 * =20: Delete recipe, execution error
319 * =21: Delete recipe, files don't exist
320 * =22: Delete recipe, members don't exist
321 * =23: Delete recipe, groups don't exist
322 * =24: Delete recipe, success
323 * =25: Delete and sort recipe, start
324 * =26: Delete recipe and sort, execution error
325 * =27: Delete recipe and sort, files don't exist
326 * =28: Delete recipe and sort, members don't exist
327 * =29: Delete recipe and sort, groups don't exist
328 * =30: Delete recipe and sort, success
329 * =37: CSV recipe files import successfully
330 * =38: CSV recipe files import failed.
331 )))
332 |=(% style="width: 160px;" %)HSW243|(% style="width:282px" %)Prompt result of recipe index|(% style="width:452px" %)(((
333 * =31: Recipe index, start
334 * =32: Recipe index, execution error
335 * =33: Recipe index, files don't exist
336 * =34: Recipe index, members don't exist
337 * =35: Recipe index, groups don't exist
338 * =36: Recipe index, success
339 )))
340 |=(% style="width: 160px;" %)HSW521|(% style="width:282px" %)Delete graph and alarm record|(% style="width:452px" %)(((
341 * =0: No operation
342 * =1: HSX521.0=1, delete all records.
343 * =2: HSX521.1=1, delete all trend graph.
344 * =4: HSX521.2=1, delete all alarms.
345 * =16: HSX521.4=1, delete history XY plot.
346 * =32: HSX521.5=1, delete data records in SD card or USB flash disk;(Please make a setting which is saved to USB flash disk or SD card in project setting).
347 * =64: HSX521.6=1, delete alarms records in SD card or USB flash disk; (Please make a setting which is saved to USB flash disk or SD card in project setting).
348 )))
349 |=(% style="width: 160px;" %)HSW522|(% style="width:282px" %)Copy and paste the alarm/data files in flash to the USB flash disk|(% style="width:452px" %)(((
350 * =0: No operation
351 * =1: HSX522.0=1, copy all record
352 * =2: HSX522.2=1, copy history XY trend graph
353 * =8: HSX522.3=1, copy alarm record
354 * =32: HSX522.5=1, copy recipe
355 )))
356 |=(% style="width: 160px;" %)HSW523|(% style="width:282px" %)Copy and paste the alarm/data files in flash to the SD card|(% style="width:452px" %)(((
357 * =0: No operation
358 * =1: HSX523.0=1, copy all record
359 * =4: HSX523.2=1, copy history XY trend graph
360 * =8: HSX523.3=1, copy alarm record
361 )))
362 |=(% style="width: 160px;" %)HSW524|(% style="width:282px" %)Copy and paste the alarm/data files in SD card to the USB flash disk|(% style="width:452px" %)(((
363 * =0: no operation
364 * =4: HSX524.2=1, copy history XY trend graph
365 * =8: HSX524.3=1, copy alarm record
366 * =16: HSX524.4=1, copy history alarm record
367 * =32: HSX524.5=1, copy data record
368 )))
369 |=(% style="width: 160px;" %)HSW525|(% style="width:282px" %)Copy and paste the alarm/data files in USB flash disk to SD card|(% style="width:452px" %)(((
370 * =0: no operation
371 * =4: HSX525.2=1, copy history XY trend graph
372 * =8: HSX525.3=1, copy alarm record
373 * =16: HSX525.4=1, copy history alarm record
374 * =32: HSX525.5= 1, copy data record
375 )))
376 |=(% style="width: 160px;" %)HSW526|(% style="width:282px" %)Delete file list|(% style="width:452px" %)(((
377 * =0: no operation
378 * =1: HSX526.0=1, delete designated file
379 * =2: HSX526.1=1, delete all files
380 )))
381 |=(% style="width: 160px;" %)HSW527|(% style="width:282px" %)Eject USB flash disk/SD card|(% style="width:452px" %)(((
382 * =0: No operation
383 * =1: Eject USB flash disk
384 * =2: Eject SD card
385 )))
386 |=(% style="width: 160px;" %)HSW528|(% style="width:282px" %)The state of USB flash disk|(% style="width:452px" %)(((
387 * =1: USB flash disk is detected
388 * =2: Ejecting USB flash disk, please waiting…
389 * =3: USB flash disk ejected
390 )))
391 |=(% style="width: 160px;" %)HSW529|(% style="width:282px" %)The state of SD card|(% style="width:452px" %)(((
392 * =1: SD card is detected
393 * =2: Ejecting SD card, please waiting…
394 * =3: SD card ejected
395 )))
396 |=(% style="width: 160px;" %)HSW550~~849|(% style="width:282px" %)Communication control|(% style="width:452px" %)For communication control and communication lamp (please refer to "[[Communication control>>https://docs.we-con.com.cn/bin/view/PIStudio/13.HMI%20internal%20registers/#HCommunicationcontrol]]" sector for detailed)
397 |=(% style="width: 160px;" %)HSW850|(% style="width:282px" %)(((
398 Network state
399
400 (4G, WIFI and Ethernet)
401 )))|(% style="width:452px" %)(((
402 In HMI V1.0
403
404 * =0: Network is disconnected.
405 * =1: only LAN connected, and APP can't access HMI.
406 * =2: WECON Cloud connected , APP and web could access HMI.
407
408 In HMI V2.0
409
410 * =0: Network is disconnected.
411 * =1: Network is connected.
412 )))
413 |=(% style="width: 160px;" %)HSW855|(% style="width:282px" %)Backlight Control|(% style="width:452px" %)(((
414 * HSX855.0=1: turn on the backlight and reset automatically after being triggered.
415 * HSX855.1=1: turn off the backlight and reset automatically after being triggered.
416 )))
417 |=(% style="width: 160px;" %)HSW856|(% style="width:282px" %)Whether to close the indirect screen when the current screen is switched to the other screen)|(% style="width:452px" %)(((
418 * =0: close the sub-screen, including the indirect screen;
419 * =1: not to close.
420 )))
421 |=(% style="width: 160px;" %)HSW857|(% style="width:282px" %)Permission in remote access (web page, mobile APP, cloud platform, etc.)|(% style="width:452px" %)(((
422 * =0: users could switch the screen, control the switch and update data in remote access.
423 * =1: users could only control function switch (only switch the screen), view data and switch state, but could not operate or update them.
424 * =2: users could neither operate the screen switch, nor switch operation and data modification, only view. (The ig series and 8000/9000 series with -R after system upgrade)
425 )))
426 |=(% style="width: 160px;" %)HSW860~~861|(% style="width:282px" %)Data partition remaining space|(% style="width:452px" %)Display the data partition remaining space, updated every minute, unit(**kB**)
427 |=(% style="width: 160px;" %)HSW880|(% style="width:282px" %)Enable data partition remaining space|(% style="width:452px" %)(((
428 ~=1, able to view the data partition remaining space from HSW860~~861.
429
430 ~=Other value except 1, disable the viewing function.
431 )))
432 |=(% style="width: 160px;" %)HSW881|(% style="width:282px" %)Storage of Record files|(% style="width:452px" %)(((
433 It is used for controlling saving alarm/data record files to U disk / SD card.
434
435 * = 0: Save to storage.
436 * = 1: Don't save to storage.
437 )))
438 |=(% style="width: 160px;" %)HSW882|(% style="width:282px" %)Storage device status|(% style="width:452px" %)(((
439 * HDX882.0=0 USB flash doesn't execute storage or storage finished.
440 * HDX882.0=1 USB flash is reading data, don't remove USB flash.
441 * HDX882.1=0 SD card doesn't execute storage or storage finished.
442 * HDX882.1=1 SD card is reading data, don't remove SD card.
443 )))
444 |=(% style="width: 160px;" %)HSW884|(% style="width:282px" %)Enter the system network configuration interface|(% style="width:452px" %)(((
445 * = 0: Do not enter the network configuration interface
446 * = 1: Enter the system network configuration interface.
447 ** ig series HMI only supports to enter the system interface
448
449 )))
450 |=(% style="width: 160px;" %)HSW885|(% style="width:282px" %)When the control object hides the address is read failed (communication failure), set the display mode of the object|(% style="width:452px" %)(((
451 * = 0: displayed by object setting.
452 * = 1: control address read failure, the address control of all objects is hidden, not displayed.
453 * = 2: control address read failure, the address control of all objects is displayed, not hidden.
454 )))
455 |=(% style="width: 160px;" %)HSW893|(% style="width:282px" %)(((
456 User Permission Control Address, same as HUW1000 feature, please refer to chapter "[[User Permission>>http://13.229.109.52:8080/wiki/pistudio/view/Helps/08.Basic%20Function/#HUserPermission]]"
457
458 **✎Note: **This address can only take effect when it is operated in the real HMI, and the operation is invalid on Web/App side.
459 )))|(% style="width:452px" %)(((
460 * =1: User Log in
461 * =2: Change User password
462 * =3: User Log out
463 * =4: New user
464 * =5: Delete user
465 * =6: Add user rights
466 * =8: Add Hide features
467 * =9: Delete Profile
468 * =10: Export Profile
469 * =11: Import profile
470 * =12: Export log file
471 * =13: Delete log file
472 )))
473 |=(% style="width: 160px;" %)HSW900|(% style="width:282px" %)Quick update frequency settings for objects|(% style="width:452px" %)(((
474 Valid when the object is enabled for "quick update". Default: 5.
475
476 Range: 1 (fastest) - 50 (slowest)
477 )))
478 |=(% style="width: 160px;" %)HSW920|(% style="width:282px" %)Static mode Maximum periods|(% style="width:452px" %)Numeric Input/ Display (range: 0-12)
479 |=(% style="width: 160px;" %)HSW921 ~~ 924|(% style="width:282px" %)Static mode Admin key|(% style="width:452px" %)Character Input/ Display (length: 8)
480 |=(% style="width: 160px;" %)HSW925 ~~ 928|(% style="width:282px" %)1^^st^^ period key (Static mode)|(% style="width:452px" %)Character Input/ Display (length: 8)
481 |=(% style="width: 160px;" %)HSW929 ~~ 933|(% style="width:282px" %)1^^st^^ expiry time (Static mode)|(% style="width:452px" %)Numeric Input/ Display (YYYYMMDDHHMM)
482 |=(% style="width: 160px;" %)HSW935 ~~ 938|(% style="width:282px" %)2^^nd^^ period key (Static mode)|(% style="width:452px" %)Character Input/ Display (length: 8)
483 |=(% style="width: 160px;" %)HSW939 ~~ 943|(% style="width:282px" %)2^^nd ^^expiry time (Static mode)|(% style="width:452px" %)Numeric Input/ Display (YYYYMMDDHHMM)
484 |=(% style="width: 160px;" %)HSW945 ~~ 948|(% style="width:282px" %)3^^rd^^ period key (Static mode)|(% style="width:452px" %)Character Input/ Display (length: 8)
485 |=(% style="width: 160px;" %)HSW949 ~~ 953|(% style="width:282px" %)3^^rd ^^expiry time (Static mode)|(% style="width:452px" %)Numeric Input/ Display (YYYYMMDDHHMM)
486 |=(% style="width: 160px;" %)HSW955 ~~ 958|(% style="width:282px" %)4^^th^^ period key (Static mode)|(% style="width:452px" %)Character Input/ Display (length: 8)
487 |=(% style="width: 160px;" %)HSW959 ~~ 963|(% style="width:282px" %)4^^th ^^expiry time (Static mode)|(% style="width:452px" %)Numeric Input/ Display (YYYYMMDDHHMM)
488 |=(% style="width: 160px;" %)HSW965 ~~ 968|(% style="width:282px" %)5^^th^^ period key (Static mode)|(% style="width:452px" %)Character Input/ Display (length: 8)
489 |=(% style="width: 160px;" %)HSW969 ~~ 973|(% style="width:282px" %)5^^th ^^expiry time (Static mode)|(% style="width:452px" %)Numeric Input/ Display (YYYYMMDDHHMM)
490 |=(% style="width: 160px;" %)HSW975 ~~ 978|(% style="width:282px" %)6^^th^^ period key (Static mode)|(% style="width:452px" %)Character Input/ Display (length: 8)
491 |=(% style="width: 160px;" %)HSW979 ~~ 983|(% style="width:282px" %)6^^th ^^expiry time (Static mode)|(% style="width:452px" %)Numeric Input/ Display (YYYYMMDDHHMM)
492 |=(% style="width: 160px;" %)HSW985 ~~ 988|(% style="width:282px" %)7^^th^^ period key (Static mode)|(% style="width:452px" %)Character Input/ Display (length: 8)
493 |=(% style="width: 160px;" %)HSW989 ~~ 993|(% style="width:282px" %)7^^th ^^expiry time (Static mode)|(% style="width:452px" %)Numeric Input/ Display (YYYYMMDDHHMM)
494 |=(% style="width: 160px;" %)HSW995 ~~ 998|(% style="width:282px" %)8^^th^^ period key (Static mode)|(% style="width:452px" %)Character Input/ Display (length: 8)
495 |=(% style="width: 160px;" %)HSW999 ~~ 1003|(% style="width:282px" %)8^^th ^^expiry time (Static mode)|(% style="width:452px" %)Numeric Input/ Display (YYYYMMDDHHMM)
496 |=(% style="width: 160px;" %)HSW1005 ~~1008|(% style="width:282px" %)9^^th^^ period key (Static mode)|(% style="width:452px" %)Character Input/ Display (length: 8)
497 |=(% style="width: 160px;" %)HSW1009 ~~ 1013|(% style="width:282px" %)9^^th ^^expiry time (Static mode)|(% style="width:452px" %)Numeric Input/ Display (YYYYMMDDHHMM)
498 |=(% style="width: 160px;" %)HSW1015 ~~1018|(% style="width:282px" %)10^^th^^ period key (Static mode)|(% style="width:452px" %)Character Input/ Display (length: 8)
499 |=(% style="width: 160px;" %)HSW1019 ~~ 1023|(% style="width:282px" %)10^^th ^^expiry time (Static mode)|(% style="width:452px" %)Numeric Input/ Display (YYYYMMDDHHMM)
500 |=(% style="width: 160px;" %)HSW1025 ~~1028|(% style="width:282px" %)11^^th^^ period key (Static mode)|(% style="width:452px" %)Character Input/ Display (length: 8)
501 |=(% style="width: 160px;" %)HSW1029 ~~ 1033|(% style="width:282px" %)11^^th ^^expiry time (Static mode)|(% style="width:452px" %)Numeric Input/ Display (YYYYMMDDHHMM)
502 |=(% style="width: 160px;" %)HSW1035 ~~1038|(% style="width:282px" %)12^^th^^ period key (Static mode)|(% style="width:452px" %)Character Input/ Display (length: 8)
503 |=(% style="width: 160px;" %)HSW1039 ~~ 1043|(% style="width:282px" %)12^^th ^^expiry time (Static mode)|(% style="width:452px" %)Numeric Input/ Display (YYYYMMDDHHMM)
504 |=(% style="width: 160px;" %)HSW1046|(% style="width:282px" %)Current period (Static mode)|(% style="width:452px" %)Current period (Range 1-13)
505 |=(% style="width: 160px;" %)HSW1047|(% style="width:282px" %)Save settings (Static mode)|(% style="width:452px" %)(((
506 * HSX1047.0=1: Save static installment information
507 * HSX1047.1=1: Write installment information to registers
508 )))
509 |=(% style="width: 160px;" %)HSW1050~~HSW1065|(% style="width:282px" %)The recipe name that can input csv format|(% style="width:452px" %)Input CSV format recipe file name through "Character Input/ Display".(This function should be used in combination with the recipefunction)
510 |=(% style="width: 160px;" %)HSW1066|(% style="width:282px" %)Configure the type of the CSV file imported|(% style="width:452px" %)(((
511 The CSV file type imported (This function should be used in combination with the recipe function)
512
513 * =0: Import customed CSV file. The data in the file is valid.
514 * =1: Import ordinary recipe files of regular series HMI. The 1st row of the file is invalid.
515 * =2: Import special recipe files of regular series HMI. The 1st and 3nd rows and the 1st colume of the file is invalid.
516 )))
517 |=(% style="width: 160px;" %)HSW1067|(% style="width:282px" %)Location where the CSV file is saved|(% style="width:452px" %)(((
518 Set the path of CSV file (This function should be used in combination with the recipe function)
519
520 * =0: In the CsvFile directory of the USB stick
521 * =1: In the CsvFile directory of the SD card
522 )))
523 |=(% style="width: 160px;" %)HSW1070|(% style="width:282px" %)The time interval (seconds) since the last time the screen was clicked|(% style="width:452px" %)(((
524 Shows how long the current screen has not been clicked, using a decimal unsigned double word (Numeric Input/ Display).
525
526 (% class="box infomessage" %)
527 (((
528 **✎Note: **This register is cleared to zero regardless of which user clicks on the screen.
529 )))
530 )))
531 |=(% style="width: 160px;" %)HSW1073|(% style="width:282px" %)Corresponding key value from keyboard|(% style="width:452px" %)Display the key value of the currently pressed key, the key value is shown in Table 1 (not updated when the character input display is being input)
532 |=(% style="width: 160px;" %)HSW1074|(% style="width:282px" %)Keyboard key status|(% style="width:452px" %)Display the current button status (not updated when the numeric input display is being input)(((
533 * =0: key release
534 * =1: key press
535 * =2: Long press the button
536 )))
537 |=(% style="width: 160px;" %)HSW1075|(% style="width:282px" %)Cursor speed|(% style="width:452px" %)Control the cursor movement speed, the range is 0～100, the default is 20
538 |=(% style="width: 160px;" %)HSW1076|(% style="width:282px" %)Cursor x coordinate value|(% style="width:452px" %)Record the x value at the current position of the cursor, range: 0 to screen width -1
539 |=(% style="width: 160px;" %)HSW1077|(% style="width:282px" %)Cursor y coordinate value|(% style="width:452px" %)Record the y value at the current position of the cursor, range: 0 to screen height-1
540 |=(% style="width: 160px;" %)HSW1078|(% style="width:282px" %)Corresponding ASCII code for keyboard keys|(% style="width:452px" %)Only the ASCII value of letters, numbers, and symbols are displayed, and the ASCII value of the function button is not displayed.
541 |=(% style="width: 160px;" %)HSW1079|(% style="width:282px" %)Trigger to set the cursor position and set the Enter key mode|(% style="width:452px" %)(((
542 * HSX1079.0=1: Set the cursor position according to the cursor xy register value;
543 * HSX1079.1=0: When the numeric/character input display is being input, press Enter to end the input, no value/text part is being input, Enter is a normal click;
544 * HSX1079.1=1 Regardless of whether the numeric/character component is inputting the Enter key, only normal click is performed, and the keyboard end input is not performed.
545 )))
546 |=(% style="width: 160px;" %)HSW1083|(% style="width:282px" %)Naming method for printing object screenshots|(% style="width:452px" %)(((
547 Example: The time is 2019-01-04 14:29:10 (523 milliseconds), the screen number is 0, and the object ID is 2.
548
549 * =0: Use year, month, day, hour, minute, second, millisecond, screen number, part number to name, such as: 2019010414291052302.bmp.
550 * =1: Name using year, month, day, hour, minute, and second.
551
552 For example: 20190104142910.bmp.
553 )))
554 |=(% style="width: 160px;" %)HSW1086|(% style="width:282px" %)Control address mapping polling cycle, unit: ms|(% style="width:452px" %)(((
555 Address mapping polling cycle, effective range: 40~~1000ms, default: 300ms.
556
557 * When the set value is greater than 1000, the value is 1000.
558 * When the set value is lower than 40, it changes to the default value 300
559 )))
560 |=(% style="width: 160px;" %)HSW1087|(% style="width:282px" %)Control write interval in address mapping|(% style="width:452px" %)(((
561 After reading data to the device for N times, Perform an address mapping write operation. N is the interval value. The effective range: 0~~5, and default is 2.
562
563 When N more than 5, it is 5.
564
565 0 is the fastest and 5 is the slowest.
566 )))
567 |=(% style="width: 160px;" %)HSW1088|(% style="width:282px" %)Control the write interval of script|(% style="width:452px" %)(((
568 After reading data to the device for N times, Perform a script write operation. N is the interval value. The effective range: 0~~5, and default is 2.
569
570 When N more than 5, it is 5.
571
572 0 is the fastest and 5 is the slowest.
573 )))
574 |=(% style="width: 160px;" %)HSW1089|(% style="width:282px" %)Control interval of read through|(% style="width:452px" %)(((
575 After reading data to the device for N times, Perform a read through operation. N is the interval value. The effective range: 0~~5, and default is 2.
576
577 When N more than 5, it is 5.
578
579 0 is the fastest and 5 is the slowest.
580 )))
581 |=(% style="width: 160px;" %)HSW1100|(% colspan="1" rowspan="4" style="width:282px" %)Set the Master IP for Multi-link|(% style="width:452px" %)High word 1 for Master IP address of multi-link
582 |=(% style="width: 160px;" %)HSW1101|(% style="width:452px" %)High word 2 for Master IP address of multi-link
583 |=(% style="width: 160px;" %)HSW1102|(% style="width:452px" %)High word 3 for Master IP address of multi-link
584 |=(% style="width: 160px;" %)HSW1103|(% style="width:452px" %)High word 4 for Master IP address of multi-link
585 |=(% style="width: 160px;" %)HSW1104|(% style="width:282px" %)Control connection to Master or not for Multi-link slave device|(% style="width:452px" %)(((
586 * =1: Connect to the Master
587 * =0: Do not connect to Master
588 )))
589 |=(% style="width: 160px;" %)HSW1141|(% style="width:282px" %)Release alarm|(% style="width:452px" %)(((
590 * =0, Default value
591 * =1, Release the alarm generated before the last power-down when starting up
592 )))
593 |=(% style="width: 160px;" %)HSW1200|(% colspan="1" rowspan="2" style="width:282px" %)TSAP settings for HMI in the Siemens LOGO! 8 protocol(ig series or HMI V2.0)|(% style="width:452px" %)HMI local TSAP, which corresponds to the remote TSAP of PLC
594 |=(% style="width: 160px;" %)HSW1201|(% style="width:452px" %)HMI remote TSAP, which corresponds to the local TSAP of PLC
595 |=(% style="width: 160px;" %)HSW1450|(% style="width:282px" %)Enable objects level password function|(% style="width:452px" %)(((
596 * =0, Disable
597 * =1, Enable
598 )))
599 |=(% style="width: 160px;" %)HSW1451|(% style="width:282px" %)Whether the object level passwords are independent of each other|(% style="width:452px" %)(((
600 * =0, No, high-level passwords can unlock low-level
601 * = 1, Yes, high-level passwords cannot unlock low-level
602 )))
603 |=(% style="width: 160px;" %)HSW1452|(% style="width:282px" %)Initialization level|(% style="width:452px" %)Initialization level while HMI running
604 |=(% style="width: 160px;" %)HSW1454~~1457|(% style="width:282px" %)Password for Level 1|(% style="width:452px" %)(((
605 Display password for level 1, using character input object, up to 8 characters (numbers, letters (case sensitive))
606 )))
607 |=(% style="width: 160px;" %)HSW1458~~1461|(% style="width:282px" %)Password for Level 2|(% style="width:452px" %)Display password for level 2, using character input object, up to 8 characters (numbers, letters (case sensitive))
608 |=(% style="width: 160px;" %)HSW1462~~1465|(% style="width:282px" %)Password for Level 3|(% style="width:452px" %)Display password for level 3, using character input object, up to 8 characters (numbers, letters (case sensitive))
609 |=(% style="width: 160px;" %)HSW1466~~1469|(% style="width:282px" %)Password for Level 4|(% style="width:452px" %)Display password for level 4, using character input object, up to 8 characters (numbers, letters (case sensitive))
610 |=(% style="width: 160px;" %)HSW1470~~1473|(% style="width:282px" %)Password for Level 5|(% style="width:452px" %)Display password for level 5, using character input object, up to 8 characters (numbers, letters (case sensitive))
611 |=(% style="width: 160px;" %)HSW1474~~1477|(% style="width:282px" %)Password for Level 6|(% style="width:452px" %)Display password for level 6, using character input object, up to 8 characters (numbers, letters (case sensitive))
612 |=(% style="width: 160px;" %)HSW1478~~1481|(% style="width:282px" %)Password for Level 7|(% style="width:452px" %)Display password for level 7, using character input object, up to 8 characters (numbers, letters (case sensitive))
613 |=(% style="width: 160px;" %)HSW1482~~1485|(% style="width:282px" %)Password for Level 8|(% style="width:452px" %)Display password for level 8, using character input object, up to 8 characters (numbers, letters (case sensitive))
614 |=(% style="width: 160px;" %)HSW1486~~1489|(% style="width:282px" %)Password for Level 9|(% style="width:452px" %)Display password for level 9, using character input object, up to 8 characters (numbers, letters (case sensitive))
615 |=(% style="width: 160px;" %)HSW1490~~1493|(% style="width:282px" %)Password for Level 10|(% style="width:452px" %)Display password for level 10, using character input object, up to 8 characters (numbers, letters (case sensitive))
616 |=(% style="width: 160px;" %)HSW1494~~1497|(% style="width:282px" %)Password for Level 11|(% style="width:452px" %)Display password for level 11, using character input object, up to 8 characters (numbers, letters (case sensitive))
617 |=(% style="width: 160px;" %)HSW1498~~1501|(% style="width:282px" %)Password for Level 12|(% style="width:452px" %)Display password for level 12, using character input object, up to 8 characters (numbers, letters (case sensitive))
618 |=(% style="width: 160px;" %)HSW1502|(% style="width:282px" %)Modify password for object level|(% style="width:452px" %)(((
619 * HSX1502.0=1: Modification comfirmed. Save the data of HSW1450~~HSW1501 to a file for immediate effect.
620 * HSX1502.1=1:Modification cancelled. Restore the current data of hSW1450-HSW1501 to the data saved in the file last time.
621 )))
622 |=(% style="width: 160px;" %)HSW1509|(% style="width:282px" %)Curve width|(% style="width:452px" %)(((
623 * =0: Use the curve width set by project default.
624 * =1 to 10: use special register to set curve width.
625 )))
626 |=(% style="width: 160px;" %)HSW1603|(% style="width:282px" %)Number of current unreleased alarms|(% style="width:452px" %)The number of current unreleased alarms in alarm record file.
627 |=(% style="width: 160px;" %)HSW1604|(% style="width:282px" %)The auxiliary judgment address when the control bit in the Object Lock fails to be read|(% style="width:452px" %)(((
628 * =0: The auxiliary address is invalid.
629 * =1: When the communication fails, lock the object.
630 * =2: When the communication fails, unlock the object.
631 * =Others: The auxiliary address is invalid.
632 )))
633 |=(% style="width: 160px;" %)HSW1605|(% style="width:282px" %)BCD format natural decimal control|(% style="width:452px" %)(((
634 Whether to display natural decimals with decimal point in BCD format:
635
636 * 0=Not enabled.
637 * 1=Enable.
638
639 (For example, 56.20 is displayed as 56.2, 33.00 is displayed as 33)
640 )))
641 |=(% style="width: 160px;" %)HSW1606|(% style="width:282px" %)User permission modification control|(% style="width:452px" %)(((
642 * =0: Ordinary users are allowed to modify permissions and other operations
643 * =1: Only the administrator can operate (default is 0)
644 )))
645 |=(% style="width: 160px;" %)HSW1607|(% style="width:282px" %)The spacing value among the drop-down items of the drop-down list|(% style="width:452px" %)10 to 50 is effective, such as: 23 is 2.3 times the height of the object.
646 |=(% style="width: 160px;" %)HSW1611|(% style="width:282px" %)(((
647 Traditional recipe transfer
648 )))|(% style="width:452px" %)(((
649 * =1: download traditional recipe.
650 * =2: upload the traditional recipe.
651 )))
652 |=(% style="width: 160px;" %)HSW1612|(% style="width:282px" %)Traditional Recipe group number|(% style="width:452px" %)Traditional Recipe group number
653 |=(% style="width: 160px;" %)HSW1613|(% style="width:282px" %)Display the status of network card|(% style="width:452px" %)(((
654 * =1: Normal
655 * =Others: Abnormal
656 )))
657 |=(% style="width: 160px;" %)HSW1614~~1623|(% style="width:282px" %)Download speed per second|(% style="width:452px" %)Display the download speed per second. (The value is string)
658 |=(% style="width: 160px;" %)HSW1624~~1633|(% style="width:282px" %)Upnload speed per second|(% style="width:452px" %)Display the upload speed per second. (The value is string)
659 |=(% style="width: 160px;" %)HSW1634~~1643|(% style="width:282px" %)Flow consumption rate|(% style="width:452px" %)Display the total flow rate per second (The value is string)
660 |=(% style="width: 160px;" %)HSW1644~~1653|(% style="width:282px" %)Download flow consumption after power on|(% style="width:452px" %)Display the download flow consumption after power on (The value is string)
661 |=(% style="width: 160px;" %)HSW1654~~1663|(% style="width:282px" %)Upload flow consumption after power on|(% style="width:452px" %)Display the upload flow consumption after power on (The value is string)
662 |=(% style="width: 160px;" %)HSW1664~~1673|(% style="width:282px" %)Total flow consumption after power on|(% style="width:452px" %)Display the total flow consumption after power on (download and upload). (The value is string)
663 |=(% style="width: 160px;" %)HSW1674~~1683|(% style="width:282px" %)Historical flow consumption|(% style="width:452px" %)Display historical flow consumption (download and upload). (The value is string)
664 |=(% style="width: 160px;" %)HSW1684~~1693|(% style="width:282px" %)Flow consumption in 10 minutes|(% style="width:452px" %)Flow consumption in 10 minutes (download and upload). (The value is string)
665 |=(% style="width: 160px;" %)HSW1694~~1703|(% style="width:282px" %)Flow consumption in 30 minutes|(% style="width:452px" %)Flow consumption in 30 minutes (download and upload). (The value is string)
666 |=(% style="width: 160px;" %)HSW1704~~1713|(% style="width:282px" %)Flow consumption in 3 hours|(% style="width:452px" %)Flow consumption in 3 hours (download and upload). (The value is string)
667 |=(% style="width: 160px;" %)HSW1715|(% style="width:282px" %)Reset flow|(% style="width:452px" %)(((
668 * =1: Clear historical flow data and restart the count.
669 * =Others: Invalid
670 )))
671 |=(% style="width: 160px;" %)HSW1719|(% style="width:282px" %)Network status of Ethernet connnecting to server|(% style="width:452px" %)(((
672 * =0: Server connection exception
673 * =1: Server connection is OK
674 )))
675 |=(% style="width: 160px;" %)HSW1720|(% colspan="1" rowspan="12" style="width:282px" %)Related IP register in WIFI network status (It is valid when HMI is connected to WIFI)|(% style="width:452px" %)Local IP address high byte 1
676 |=(% style="width: 160px;" %)HSW1721|(% style="width:452px" %)Local IP address high byte 2
677 |=(% style="width: 160px;" %)HSW1722|(% style="width:452px" %)Local IP address high byte 3
678 |=(% style="width: 160px;" %)HSW1723|(% style="width:452px" %)Local IP address high byte 4
679 |=(% style="width: 160px;" %)HSW1724|(% style="width:452px" %)Local mask IP address high byte 1
680 |=(% style="width: 160px;" %)HSW1725|(% style="width:452px" %)Local mask IP address high byte 2
681 |=(% style="width: 160px;" %)HSW1726|(% style="width:452px" %)Local mask IP address high byte 3
682 |=(% style="width: 160px;" %)HSW1727|(% style="width:452px" %)Local mask IP address high byte 4
683 |=(% style="width: 160px;" %)HSW1728|(% style="width:452px" %)Local gateway IP address high byte 1
684 |=(% style="width: 160px;" %)HSW1729|(% style="width:452px" %)Local gateway IP address high byte 2
685 |=(% style="width: 160px;" %)HSW1730|(% style="width:452px" %)Local gateway IP address high byte 3
686 |=(% style="width: 160px;" %)HSW1731|(% style="width:452px" %)Local gateway IP address high byte 4
687 |=(% style="width: 160px;" %)HSW1733|(% colspan="1" rowspan="6" style="width:282px" %)(((
688 Display the MAC code of current WIFI
689
690 (display in hexadecimal)
691 )))|(% style="width:452px" %)Local MAC address high byte 1 (hexadecimal)
692 |=(% style="width: 160px;" %)HSW1734|(% style="width:452px" %)Local MAC address high byte 2 (hexadecimal)
693 |=(% style="width: 160px;" %)HSW1735|(% style="width:452px" %)Local MAC address high byte 3 (hexadecimal)
694 |=(% style="width: 160px;" %)HSW1736|(% style="width:452px" %)Local MAC address high byte 4 (hexadecimal)
695 |=(% style="width: 160px;" %)HSW1737|(% style="width:452px" %)Local MAC address high byte 5 (hexadecimal)
696 |=(% style="width: 160px;" %)HSW1738|(% style="width:452px" %)Local MAC address high byte 6 (hexadecimal)
697 |=(% style="width: 160px;" %)HSW1739|(% style="width:282px" %)Display the network status of WIFI|(% style="width:452px" %)(((
698 * =0: Server connection exception
699 * =1: Server connection is OK
700 )))
701 |=(% style="width: 160px;" %)HSW1740|(% style="width:282px" %)Wi-fi signal strength|(% style="width:452px" %)(((
702 Display the value of Wi-fi signal signal strength, ranges from 0~~100 (Signal strength is automatically obtained only once when HMI is powered on, and it will not be automatically updated. It needs to be used with the HSW1890)
703 )))
704 |=(% style="width: 160px;" %)HSW1741|(% colspan="1" rowspan="12" style="width:282px" %)Related IP register in 4Gnetwork status (It is valid when HMI is connected to 4G)|(% style="width:452px" %)Local IP address high byte 1
705 |=(% style="width: 160px;" %)HSW1742|(% style="width:452px" %)Local IP address high byte 2
706 |=(% style="width: 160px;" %)HSW1743|(% style="width:452px" %)Local IP address high byte 3
707 |=(% style="width: 160px;" %)HSW1744|(% style="width:452px" %)Local IP address high byte 4
708 |=(% style="width: 160px;" %)HSW1745|(% style="width:452px" %)Local mask IP address high byte 1
709 |=(% style="width: 160px;" %)HSW1746|(% style="width:452px" %)Local mask IP address high byte 2
710 |=(% style="width: 160px;" %)HSW1747|(% style="width:452px" %)Local mask IP address high byte 3
711 |=(% style="width: 160px;" %)HSW1748|(% style="width:452px" %)Local mask IP address high byte 4
712 |=(% style="width: 160px;" %)HSW1749|(% style="width:452px" %)Local gateway IP address high byte 1
713 |=(% style="width: 160px;" %)HSW1750|(% style="width:452px" %)Local gateway IP address high byte 2
714 |=(% style="width: 160px;" %)HSW1751|(% style="width:452px" %)Local gateway IP address high byte 3
715 |=(% style="width: 160px;" %)HSW1752|(% style="width:452px" %)Local gateway IP address high byte 4
716 |=(% style="width: 160px;" %)HSW1754|(% colspan="1" rowspan="6" style="width:282px" %)(((
717 Display the MAC code of current WIFI
718
719 (display in hexadecimal)
720 )))|(% style="width:452px" %)Local MAC address high byte 1 (hexadecimal)
721 |=(% style="width: 160px;" %)HSW1755|(% style="width:452px" %)Local MAC address high byte 2 (hexadecimal)
722 |=(% style="width: 160px;" %)HSW1756|(% style="width:452px" %)Local MAC address high byte 3 (hexadecimal)
723 |=(% style="width: 160px;" %)HSW1757|(% style="width:452px" %)Local MAC address high byte 4 (hexadecimal)
724 |=(% style="width: 160px;" %)HSW1758|(% style="width:452px" %)Local MAC address high byte 5 (hexadecimal)
725 |=(% style="width: 160px;" %)HSW1759|(% style="width:452px" %)Local MAC address high byte 6 (hexadecimal)
726 |=(% style="width: 160px;" %)HSW1760|(% style="width:282px" %)Display 4G network status|(% style="width:452px" %)(((
727 * =0: Server connection exception
728 * =1: Server connection is OK
729 )))
730 |=(% style="width: 160px;" %)HSW1761|(% style="width:282px" %)Display 4G network signal strength|(% style="width:452px" %)Signal strength: 0~~31. The greater the value ,the signal is stronger
731 |=(% style="width: 160px;" %)(((
732 HSW1762
733 )))|(% colspan="1" rowspan="13" style="width:282px" %)(((
734 Note: Valid when Ethernet2 of HMI is plugged into the network cable.
735 ①、When the Ethernet setting is enabled in the project parameters, this register displays the set value.
736 ②. When the Ethernet setting is not enabled in the engineering parameters, the register displays the Ethernet IP automatically acquired by the HMI.
737 ③. When the HMI is not plugged into the network cable, the register will show 0 whether the engineering parameters are set or not.
738 ④.IP related registers can be read and written (only static IP mode can be written).
739 )))|(% style="width:452px" %)(((
740 Ethernet2 Local IP address high byte 1
741 )))
742 |=(% style="width: 160px;" %)(((
743 HSW1763
744 )))|(% style="width:452px" %)(((
745 Ethernet2 Local IP address high byte 2
746 )))
747 |=(% style="width: 160px;" %)(((
748 HSW1764
749 )))|(% style="width:452px" %)(((
750 Ethernet2 Local IP address high byte 3
751 )))
752 |=(% style="width: 160px;" %)(((
753 HSW1765
754 )))|(% style="width:452px" %)(((
755 Ethernet2 Local IP address high byte 4
756 )))
757 |=(% style="width: 160px;" %)(((
758 HSW1766
759 )))|(% style="width:452px" %)(((
760 Ethernet2 Local mask IP address high byte 1
761 )))
762 |=(% style="width: 160px;" %)(((
763 HSW1767
764 )))|(% style="width:452px" %)(((
765 Ethernet2 Local mask IP address high byte 2
766 )))
767 |=(% style="width: 160px;" %)(((
768 HSW1768
769 )))|(% style="width:452px" %)Ethernet2 Local mask IP address high byte 3
770 |=(% style="width: 160px;" %)HSW1769|(% style="width:452px" %)Ethernet2 Local mask IP address high byte 4
771 |=(% style="width: 160px;" %)(((
772 HSW1770
773 )))|(% style="width:452px" %)(((
774 Ethernet2 Local gateway IP address high byte 1
775 )))
776 |=(% style="width: 160px;" %)(((
777 HSW1771
778 )))|(% style="width:452px" %)(((
779 Ethernet2 Local gateway IP address high byte 2
780 )))
781 |=(% style="width: 160px;" %)(((
782 HSW1772
783 )))|(% style="width:452px" %)(((
784 Ethernet2 Local gateway IP address high byte 3
785 )))
786 |=(% style="width: 160px;" %)(((
787 HSW1773
788 )))|(% style="width:452px" %)(((
789 Ethernet2 Local gateway IP address high byte 4
790 )))
791 |=(% style="width: 160px;" %)(((
792 HSW1774
793 )))|(% style="width:452px" %)(((
794 Ethernet2 Local Port Address
795 )))
796 |=(% style="width: 160px;" %)(((
797 HSW1775
798 )))|(% colspan="1" rowspan="6" style="width:282px" %)(((
799 ①Display the MAC code of Ethernet2 NIC
800
801 (hexadecimal display)
802
803 ②Read-only mode, not modifiable
804 )))|(% style="width:452px" %)(((
805 Ethernet2 Local MAC code high byte 1
806 )))
807 |=(% style="width: 160px;" %)(((
808 HSW1776
809 )))|(% style="width:452px" %)(((
810 Ethernet2 Local MAC code high byte 2
811 )))
812 |=(% style="width: 160px;" %)(((
813 HSW1777
814 )))|(% style="width:452px" %)(((
815 Ethernet2 Local MAC code high byte 3
816 )))
817 |=(% style="width: 160px;" %)(((
818 HSW1778
819 )))|(% style="width:452px" %)(((
820 Ethernet2 Local MAC code high byte 4
821 )))
822 |=(% style="width: 160px;" %)(((
823 HSW1779
824 )))|(% style="width:452px" %)(((
825 Ethernet2 Local MAC code high byte 5
826 )))
827 |=(% style="width: 160px;" %)(((
828 HSW1780
829 )))|(% style="width:452px" %)(((
830 Ethernet2 Local MAC code high byte 6
831 )))
832 |=(% style="width: 160px;" %)(((
833 HSW1781
834 )))|(% colspan="1" rowspan="8" style="width:282px" %)(((
835 ①Display and modify DNS1 and DNS2 of Ethernet2
836
837 ②Related registers can be read and written mode (only static IP mode can be written)
838 )))|(% style="width:452px" %)(((
839 Ethernet2 Local DNS1 address high byte 1
840 )))
841 |=(% style="width: 160px;" %)(((
842 HSW1782
843 )))|(% style="width:452px" %)(((
844 Ethernet2 Local DNS1 address high byte 2
845 )))
846 |=(% style="width: 160px;" %)(((
847 HSW1783
848 )))|(% style="width:452px" %)(((
849 Ethernet2 Local DNS1 address high byte 3
850 )))
851 |=(% style="width: 160px;" %)(((
852 HSW1784
853 )))|(% style="width:452px" %)(((
854 Ethernet2 Local DNS1 address high byte 4
855 )))
856 |=(% style="width: 160px;" %)(((
857 HSW1785
858 )))|(% style="width:452px" %)(((
859 Ethernet2 Local DNS2 address high byte 1
860 )))
861 |=(% style="width: 160px;" %)(((
862 HSW1786
863 )))|(% style="width:452px" %)(((
864 Ethernet2 Local DNS2 address high byte 2
865 )))
866 |=(% style="width: 160px;" %)(((
867 HSW1787
868 )))|(% style="width:452px" %)(((
869 Ethernet2 Local DNS2 address high byte 3
870 )))
871 |=(% style="width: 160px;" %)(((
872 HSW1788
873 )))|(% style="width:452px" %)(((
874 Ethernet2 Local DNS2 address high byte 4
875 )))
876 |=(% style="width: 160px;" %)(((
877 HSW1789
878 )))|(% colspan="1" style="width:282px" %)(((
879 Display or set the dynamic or static IP mode of Ethernet2
880 )))|(% style="width:452px" %)(((
881 HSX1789.0 = 0, Static IP mode
882
883 HSX1789.0 = 1, dynamic IP mode
884 )))
885 |=(% style="width: 160px;" %)(((
886 HSW1790
887 )))|(% colspan="1" style="width:282px" %)(((
888 Confirm Ethernet2 IP, subnet mask, gateway, DNS1, DNS2, and dynamic static IP settings
889 )))|(% style="width:452px" %)(((
890 ~= 1, confirm the setting (i.e., after modifying IP-related information, set this address to 1, representing confirmation of the modification, after which it will be reset to 0)
891 )))
892 |=(% style="width: 160px;" %)(((
893 HSW1791
894 )))|(% colspan="1" style="width:282px" %)(((
895 Network status of the Ethernet2 connection server
896 )))|(% style="width:452px" %)(((
897 ~= 0, connection to the server is abnormal = 1, connection to the server is normal
898 )))
899 |=(% style="width: 160px;" %)HSW1852|(% style="width:282px" %)Control the interval in two consecutive clicks|(% style="width:452px" %)Limit range: 1~~500ms. The default is 100 ms.
900 |=(% style="width: 160px;" %)HSW1853|(% style="width:282px" %)File format for exporting data records to USB flash drive or SD card|(% style="width:452px" %)(((
901 * =0: db database
902 * =1: CSV
903
904 (Only valid for script function DbToCsvFile)
905 )))
906 |=(% style="width: 160px;" %)HSW1854|(% style="width:282px" %)High and low word conversion type|(% style="width:452px" %)(((
907 * =0: use the old high-low word conversion (default)
908 * =1: usie the new high-low word conversion
909 )))
910 |=(% style="width: 160px;" %)HSW1855|(% style="width:282px" %)Screen Lock prompt display control|(% style="width:452px" %)(((
911 Control whether the screen lock prompt is displayed,
912
913 * =0: display(default value)
914 * =Other: no display.
915 )))
916 |=(% style="width: 160px;" %)HSW1856|(% style="width:282px" %)Display map fence drawing status|(% style="width:452px" %)(((
917 * =0: no map fence
918 * =1: The map fence is drawn and the device is inside the fence
919 * =2: The map fence is drawn and the device is outside the fence
920 )))
921 |=(% style="width: 160px;" %)HSW1857|(% style="width:282px" %)USB disk download |(% style="width:452px" %)(((
922 * =0: download project
923 * =1: download firmware
924 * =2: enter the background
925 )))
926 |=(% style="width: 160px;" %)HSW1865|(% style="width:282px" %)Priority connection to the cloud|(% style="width:452px" %)(((
927 * =0: priority Ethernet
928 * =1: priority WLAN
929 * =2: priority 4G
930 )))
931 |=(% style="width: 160px;" %)HSW1866|(% style="width:282px" %)Delete the Lua extension module file|(% style="width:452px" %)(((
932 * =0: delete;
933 * = Others: do not delete
934 )))
935 |=(% style="width: 160px;" %)HSW1867|(% style="width:282px" %)Reset mode|(% style="width:452px" %)(((
936 Monitor address is set during reset of reset switch, whether to cancel reset,
937
938 * = 0: yes (default);
939 * = 1: no
940 )))
941 |=(% style="width: 160px;" %)HSW1868|(% style="width:282px" %)Double-click or long press the record type table mode|(% style="width:452px" %)(((
942 Controls whether the button pops up when double-clicking or long pressing on record type table object
943
944 * = 0: yes (default);
945 * = 1: no
946 )))
947 |=(% style="width: 160px;" %)(((
948 HSW1869
949 )))|(% style="width:282px" %)(((
950 Dynamic screensaver countdown
951 )))|(% style="width:452px" %)(((
952 Countdown to enter dynamic screensaver effect, unit (S)
953 )))
954 |=(% style="width: 160px;" %)(((
955 HSW1870
956 )))|(% style="width:282px" %)(((
957 Display or set the dynamic or static IP mode of Ethernet1
958 )))|(% style="width:452px" %)(((
959 HSX1870.0 = 0, Static IP mode
960
961 HSX1870.0 = 1, dynamic IP mode
962 )))
963 |=(% style="width: 160px;" %)(((
964 HSW1871
965 )))|(% style="width:282px" %)(((
966 Confirm the IP, subnet mask, gateway, DNS1, DNS2, and dynamic static IP settings for Ethernet1
967 )))|(% style="width:452px" %)(((
968 ~= 1, confirm the setting (i.e., after modifying IP-related information, set this address to 1, representing confirmation of the modification, after which it will be reset to 0)
969 )))
970 |=(% style="width: 160px;" %)(((
971 HSW1872
972 )))|(% colspan="1" rowspan="8" style="width:282px" %)(((
973 ①Display and modify DNS1 and DNS2 of Ethernet1
974
975 ②Related registers can be read and written mode (only static IP mode can be written)
976 )))|(% style="width:452px" %)(((
977 Ethernet1 Local DNS1 address high byte 1
978 )))
979 |=(% style="width: 160px;" %)(((
980 HSW1873
981 )))|(% style="width:452px" %)Ethernet1 Local DNS1 address high byte 2
982 |=(% style="width: 160px;" %)(((
983 HSW1874
984 )))|(% style="width:452px" %)Ethernet1 Local DNS1 address high byte 3
985 |=(% style="width: 160px;" %)(((
986 HSW1875
987 )))|(% style="width:452px" %)Ethernet1 Local DNS1 address high byte 4
988 |=(% style="width: 160px;" %)(((
989 HSW1876
990 )))|(% style="width:452px" %)Ethernet1 Local DNS2 address high byte 1
991 |=(% style="width: 160px;" %)(((
992 HSW1877
993 )))|(% style="width:452px" %)Ethernet1 Local DNS2 address high byte 2
994 |=(% style="width: 160px;" %)(((
995 HSW1878
996 )))|(% style="width:452px" %)Ethernet1 Local DNS2 address high byte 3
997 |=(% style="width: 160px;" %)(((
998 HSW1879
999 )))|(% style="width:452px" %)Ethernet1 Local DNS2 address high byte 4
1000 |=(% style="width: 160px;" %)HSW1890|(% colspan="1" style="width:282px" %)Enable refresh current network signal|(% style="width:452px" %)(((
1001 * =1: Refresh the network signal once after triggered (This register will be automatically reset after triggered, only update the signal value once after per 15 seconds, not able to update twice in the short interval)
1002 * =Others: not refresh
1003 )))
1004 |=(% style="width: 160px;" %)HSW1891|(% colspan="1" style="width:282px" %)Enable clear cache for screen data  |(% style="width:452px" %)(((
1005 * =1, not clear screen cache when switch language
1006 * =2, trigger clear cache of all screens for once time
1007 * =3, always clear cache of all screen data
1008 )))
1009 |=(% style="width: 160px;" %)HSW1892|(% colspan="1" style="width:282px" %)Keyboard key polling interval setting|(% style="width:452px" %)(((
1010 ~=0，50ms；
1011
1012 ~=1，40ms；
1013
1014 ~=2，30ms；
1015
1016 ~=3，20ms；
1017
1018 ~=4，10ms；
1019 )))
1020 |=(% style="width: 160px;" %)HSW1893|(% colspan="1" style="width:282px" %)Cursor mode switch|(% style="width:452px" %)(((
1021 ~=0, default free mode;
1022
1023 ~=1, selected box mode;
1024
1025 ~=2, selected gray mode;
1026
1027 ~=3, mouse selected mode;
1028 )))
1029 |=(% style="width: 160px;" %)HSW1894|(% colspan="1" style="width:282px" %)Enable a specific serial keyboard|(% style="width:452px" %)(((
1030 ~=1 Enable;
1031
1032 ~=Other, not enabled;
1033
1034 Note: Only valid for initialization, recommended to use in background initialization script;
1035 )))
1036 |=(% style="width: 160px;" %)HSW1895|(% colspan="1" style="width:282px" %)Controls whether keyboard keys are effective in certain situations|(% style="width:452px" %)(((
1037 ~=0, by default, the key trigger does not take effect when the screen is off or in screen saver mode;
1038
1039 ~=1, HSX1895.0=1, the key trigger will also take effect when the screen is off;
1040
1041 ~=2, HSX1895.1=1, the key trigger will also take effect in screen saver mode;
1042 )))
1043 |=(% style="width: 160px;" %)HSW1903|(% colspan="1" style="width:282px" %)Check the network cable connection status|(% style="width:452px" %)If a network cable is detected, it is set to 1; if no network cable is detected, it is set to 0
1044 |=(% style="width: 160px;" %)HSW10000~~19999|(% style="width:282px" %)Power-down storage area|(% style="width:452px" %)After restart, the data remains
1045 |=(% style="width: 160px;" %)HSW10035|(% rowspan="13" style="width:282px" %)(((
1046 Note: Valid when Ethernet1 of HMI is plugged into the network cable.
1047 ① When the Ethernet setting is enabled in the project parameters, this register displays the set value.
1048 ② When the Ethernet setting is not enabled in the engineering parameters, the register displays the Ethernet IP automatically acquired by the HMI.
1049 ③ When the HMI is not plugged into the network cable, the register will show 0 whether the engineering parameters are set or not.
1050 ④ IP related registers can be read and written (only static IP mode can be written).
1051 )))|(% style="width:452px" %)Local IP address high byte 1
1052 |=(% style="width: 160px;" %)HSW10036|(% style="width:452px" %)Local IP address high byte 2
1053 |=(% style="width: 160px;" %)HSW10037|(% style="width:452px" %)Local IP address high byte 3
1054 |=(% style="width: 160px;" %)HSW10038|(% style="width:452px" %)Local IP address high byte 4
1055 |=(% style="width: 160px;" %)HSW10039|(% style="width:452px" %)Local mask IP address high byte 1
1056 |=(% style="width: 160px;" %)HSW10040|(% style="width:452px" %)Local mask IP address high byte 2
1057 |=(% style="width: 160px;" %)HSW10041|(% style="width:452px" %)Local mask IP address high byte 3
1058 |=(% style="width: 160px;" %)HSW10042|(% style="width:452px" %)Local mask IP address high byte 4
1059 |=(% style="width: 160px;" %)HSW10043|(% style="width:452px" %)Local gateway address high byte 1
1060 |=(% style="width: 160px;" %)HSW10044|(% style="width:452px" %)Local gateway address high byte 2
1061 |=(% style="width: 160px;" %)HSW10045|(% style="width:452px" %)Local gateway address high byte 3
1062 |=(% style="width: 160px;" %)HSW10046|(% style="width:452px" %)Local gateway address high byte 4
1063 |=(% style="width: 160px;" %)HSW10047|(% style="width:452px" %)Local port address
1064 |=(% style="width: 160px;" %)HSW10048|(% rowspan="6" style="width:282px" %)(((
1065 ①Display the MAC code of Ethernet1 NIC
1066
1067 (hexadecimal display)
1068
1069 ②Read-only mode, not modifiable
1070 )))|(% style="width:452px" %)Local MAC code high word 1
1071 |=(% style="width: 160px;" %)HSW10049|(% style="width:452px" %)Local MAC code high word 2
1072 |=(% style="width: 160px;" %)HSW10050|(% style="width:452px" %)Local MAC code high word 3
1073 |=(% style="width: 160px;" %)HSW10051|(% style="width:452px" %)Local MAC code high word 4
1074 |=(% style="width: 160px;" %)HSW10052|(% style="width:452px" %)Local MAC code high word 5
1075 |=(% style="width: 160px;" %)HSW10053|(% style="width:452px" %)Local MAC code high word 6
1076 |=(% style="width: 160px;" %)HSW10118|(% colspan="1" rowspan="2" style="width:282px" %)TSAP settings for HMI in the Siemens LOGO! 8 protocol|(% style="width:452px" %)HMI local TSAP, which corresponds to the remote TSAP of PLC
1077 |=(% style="width: 160px;" %)HSW10119|(% style="width:452px" %)HMI remote TSAP, which corresponds to the local TSAP of PLC
1078 |=(% style="width: 160px;" %)HSW10461~~10493|(% style="width:282px" %)Remote access password|(% style="width:452px" %)8-character remote access password
1079 |=(% style="width: 160px;" %)HSW10494~~10558|(% style="width:282px" %)Machine ID (Read only)|(% style="width:452px" %)Machine ID for remote access (read only 64-bit)
1080 |=(% style="width: 160px;" %)HSW10576|(% style="width:282px" %)Save dynamic installment settings|(% style="width:452px" %)HSX10576.0=1: Save the set dynamic installment information
1081 |=(% style="width: 160px;" %)HSW10577|(% style="width:282px" %)Control address for installment|(% style="width:452px" %)(((
1082 * HSX10577.0=0: disable dynamic installment
1083 * HSX10577.0=1: enable dynamic installment
1084 * HSX10577.1=0: disable static installment
1085 * HSX10577.1=1: enable static installment
1086 )))
1087 |=(% style="width: 160px;" %)HSW10578-10583|(% style="width:282px" %)Password for dynamic installment|(% style="width:452px" %)Character Input/ Display (length: 6)
1088 |=(% style="width: 160px;" %)HSW10584-10586|(% style="width:282px" %)Expiry time of dynamic installment|(% style="width:452px" %)Expiry time: YYYYMMDD (Numeric Input/ Display)
1089 |=(% style="width: 160px;" %)HSW10587-10589|(% style="width:282px" %)Last expiry time of dynamic installment|(% style="width:452px" %)Expiry time: YYYYMMDD (Numeric Input/ Display)
1090 |=(% style="width: 160px;" %)HSW10590|(% style="width:282px" %)Background light time|(% style="width:452px" %)(((
1091 Set the light time for background
1092
1093 * =0: The screen backlight is always on.
1094 * =Others: The screen backlight is on for a period of time and then turns off. The length of time is controlled by the value of the register address. Unit: second.
1095 )))
1096 |=(% style="width: 160px;" %)HSW10591|(% style="width:282px" %)Backlight brightness adjustment|(% style="width:452px" %)Backlight brightness range: 1 (darkest) ~~ 100 (brightest)
1097 |=(% style="width: 160px;" %)HSW10603|(% style="width:282px" %)Set the printer to print orientation|(% style="width:452px" %)(((
1098 Set the print direction:
1099
1100 * =1: Forward printing
1101 * =2: Reverse print
1102 * =Other: Forward print
1103 )))
1104 |=(% style="width: 160px;" %)HSW10604|(% style="width:282px" %)Print dot type|(% style="width:452px" %)(((
1105 * =1: new firmware 8 dot matrix type
1106 * =2: new firmware 24 dot matrix type
1107 * =3: old firmware 8 dot matrix type
1108 * =4: old firmware 24 dot matrix type
1109 * =Other: new firmware 8 dot matrix type
1110 )))
1111 |=(% style="width: 160px;" %)HSW10605|(% style="width:282px" %)Print width of printer|(% style="width:452px" %)Set the width of the printer to print (in pixels), such as HSW10605 = 394: The printer supports images with a print width of 394 pixels
1112 |=(% style="width: 160px;" %)HSW10606|(% style="width:282px" %)Printer instruction type|(% style="width:452px" %)(((
1113 * =1: Graphic print type
1114 * =2: Dot density printing type
1115 * =3(Default value): special for EPSON printer
1116 )))
1117 |=(% style="width: 160px;" %)HSW10607|(% style="width:282px" %)Printer paper cutting function|(% style="width:452px" %)(((
1118 * =1: Enable
1119 * =2: Disable
1120 )))
1121 |=(% style="width: 160px;" %)HSW10608|(% style="width:282px" %)Print the alignment of the text|(% style="width:452px" %)(((
1122 * =1: Left alignment
1123 * =2: Center alignment
1124 * =3: Right alignment
1125 )))
1126 |=(% style="width: 160px;" %)HSW10611|(% style="width:282px" %)Set weconcloud server|(% style="width:452px" %)(((
1127 * =0: Select the server configured in "Project Settings"
1128 * =1: select Server 1
1129 * =2: select Server 2
1130 )))
1131 |=(% style="width: 160px;" %)HSW11750|(% style="width:282px" %)Set the language of the Message List prompt** (ie series)**|(% style="width:452px" %)(((
1132 * =0: which is followed the project language
1133 * =1: English
1134 * =2: Chinese
1135 )))
1136 |=(% style="width: 160px;" %)HSW11752|(% style="width:282px" %)Traffic monitoring control|(% style="width:452px" %)= 1: Enable the flow monitoring function
1137 ~= Other: Disable the flow monitoring function
1138 |=(% style="width: 160px;" %)HSW11753|(% style="width:282px" %)Traffic monitoring network card type|(% style="width:452px" %)= 0: Ethernet card
1139 ~= 1: 4G
1140 ~= 2: Wi-Fi
1141 |=(% style="width: 160px;" %)HSW11754-11755|(% style="width:282px" %)Historical traffic consumption|(% style="width:452px" %)The total traffic consumed historically (bytes) [value is an integer]
1142 |=(% style="width: 160px;" %)HSW11756|(% style="width:282px" %)(((
1143 Access permission restrictions
1144
1145 (ig series and** **8000/9000 series with -R after system upgrade)
1146 )))|(% style="width:452px" %)(((
1147 * =0: LAN or the external network both OK
1148 * =1: Only LAN access
1149 * =2: Only external network can access
1150 * =3: Close the functions
1151 )))
1152 |=(% style="width: 160px;" %)HSW11757|(% style="width:282px" %)Enable the valid date of the dynamic installment password|(% style="width:452px" %)(((
1153 * =0: Disabled
1154 * =1: Enable
1155 )))
1156 |=(% style="width: 160px;" %)HSW11758|(% style="width:282px" %)Enable Screensaver|(% style="width:452px" %)(((
1157 * =0: Disabled
1158 * =1: Enable
1159 )))
1160 |=(% style="width: 160px;" %)HSW11759|(% style="width:282px" %)Screensaver interval time|(% style="width:452px" %)(((
1161 Set the time how long will enter Screensaver (Range 10~~43200s)
1162 )))
1163 |=(% style="width: 160px;" %)HSW11760|(% style="width:282px" %)Screensaver countdown|(% style="width:452px" %)Display the countdown to enter the Screensaver, unit: second.
1164 |=(% style="width: 160px;" %)HSW11761|(% style="width:282px" %)Screensaver screen number|(% style="width:452px" %)Set the screen number for Screensaver
1165 |=(% style="width: 160px;" %)(((
1166 HSW11762
1167 )))|(% style="width:282px" %)(((
1168 Dynamic screensaver control address
1169 )))|(% style="width:452px" %)(((
1170 HSX11762.0=0, initialize with project configuration;
1171
1172 HSX11762.0=1, initialize with special register configuration;
1173
1174 HSX11762.1=0, disable dynamic screensaver;
1175
1176 HSX11762.1=1, enable dynamic screensaver
1177 )))
1178 |=(% style="width: 160px;" %)(((
1179 HSW11763
1180 )))|(% style="width:282px" %)(((
1181 Waiting time to enter the dynamic screensaver
1182 )))|(% style="width:452px" %)(((
1183 Waiting time when the screen is not operated, range 1~~720 minutes
1184 )))
1185 |=(% style="width: 160px;" %)(((
1186 HSW11764
1187 )))|(% style="width:282px" %)(((
1188 Animated screensaver animation type
1189 )))|(% style="width:452px" %)(((
1190 ~=0: Raster,=1: Blinds,=2: Bubble
1191 )))
1192 |=(% style="width: 160px;" %)HSW11767|(% style="width:282px" %)Remote screen display adaptation mode switching|(% style="width:452px" %)=0, default mode, remote full-screen zoom display for horizontal screen projects, remote proportional zoom display for vertical screen projects;
1193 ~=1, full-screen zoom display;
1194 ~=2, proportional zoom display according to screen size ratio;
1195 ~=3, no zoom display according to screen pixels;
1196 |=(% style="width: 160px;" %)HSW11773|(% style="width:282px" %)Automatically log out user control address|(% style="width:452px" %)=3: that is, HSX11773.0=1, HSX11773.1=1, based on the configuration in the address, enable automatic user logout.
1197 |=(% style="width: 160px;" %)HSW11774|(% style="width:282px" %)Automatic user logout interval|(% style="width:452px" %)(((
1198 Range: 1 to 255
1199
1200 Unit: Minutes
1201 )))
1202 |=(% style="width: 160px;" %)HSW11815|(% style="width:282px" %)Sub-screen drag function (For PI10.4 and above)|(% style="width:452px" %)(((
1203 * =0: Disabled
1204 * =1: Enable
1205 )))
1206 |=(% style="width: 160px;" %)HSW11816|(% style="width:282px" %)Recipe record component button spacing control|(% style="width:452px" %)This controls the spacing between the top and bottom rows of buttons in all recipe record widgets. The value is the pixel spacing between the buttons. The minimum value is 0, and the maximum value is calculated based on the width of each recipe widget. The spacing plus the button size must not exceed the widget's size. (Note that if the register is greater than the maximum value, the actual spacing is the maximum spacing.)
1207
1208 == Serial port communication configuration ==
1209
1210 (% class="table-bordered" %)
1211 |=(% scope="row" style="width: 102px;" %)Port|=(% style="width: 173px;" %)**Function**|=(% style="width: 122px;" %)**Address**|=(% colspan="2" style="width: 506px;" %)**Description**
1212 |(% colspan="1" rowspan="11" style="width:102px" %)COM1|(% style="width:173px" %)Communication mode|(% style="width:122px" %)HSW10061|(% colspan="2" style="width:506px" %)(((
1213 * =0: RS232
1214 * =1: RS485
1215 * =2: RS422
1216 )))
1217 |(% style="width:173px" %)Baud rate|(% style="width:122px" %)HSW10062|(% colspan="2" style="width:506px" %)(((
1218 * =0: 1200
1219 * =1: 2400
1220 * =2: 4800
1221 * =3: 9600
1222 * =4: 19200
1223 * =5: 38400
1224 * =6: 57600
1225 * =7: 115200
1226 * =8: 187500
1227 * =9: 230400
1228 )))
1229 |(% style="width:173px" %)Data bit|(% style="width:122px" %)HSW10063|(% colspan="2" style="width:506px" %)(((
1230 * =7: 7 bit
1231 * =8: 8 bit
1232 )))
1233 |(% style="width:173px" %)Stop bit|(% style="width:122px" %)HSW10064|(% colspan="2" style="width:506px" %)(((
1234 * =1: 1 bit
1235 * =2: 2 bit
1236 )))
1237 |(% style="width:173px" %)Check bit|(% style="width:122px" %)HSW10065|(% colspan="2" style="width:506px" %)(((
1238 * =0: None
1239 * =1: ODD
1240 * =2: EVEN
1241 )))
1242 |(% style="width:173px" %)Wait timeout|(% style="width:122px" %)HSW10066|(% colspan="2" style="width:506px" %)(((
1243 * Unit: ms.
1244 * Range: 0 to 30000
1245 )))
1246 |(% style="width:173px" %)reveive timeout|(% style="width:122px" %)HSW10067|(% colspan="2" style="width:506px" %)(((
1247 * Unit: ms.
1248 * Range: 0 to 30000
1249 )))
1250 |(% style="width:173px" %)Retry time|(% style="width:122px" %)HSW10068|(% colspan="2" style="width:506px" %)(((
1251 * Unit: times.
1252 * Range: 0 to 100
1253 )))
1254 |(% style="width:173px" %)Retry timeout|(% style="width:122px" %)HSW10069|(% colspan="2" style="width:506px" %)(((
1255 * Unit: s.
1256 * Range: 0 to 300
1257 )))
1258 |(% style="width:173px" %)HMI station number|(% style="width:122px" %)HSW10070|(% colspan="2" style="width:506px" %)
1259 |(% style="width:173px" %)PLC station number|(% style="width:122px" %)HSW10071|(% colspan="2" style="width:506px" %)
1260 |(% colspan="1" rowspan="11" style="width:102px" %)COM1-2|(% style="width:173px" %)Communication mode|(% style="width:122px" %)HSW10094|(% colspan="2" style="width:506px" %)(((
1261 * =0: RS232
1262 * =1: RS485
1263 * =2: RS422
1264 * =6: RS485-2
1265 )))
1266 |(% style="width:173px" %)Baud rate|(% style="width:122px" %)HSW10095|(% colspan="2" style="width:506px" %)(((
1267 * =0: 1200
1268 * =1: 2400
1269 * =2: 4800
1270 * =3: 9600
1271 * =4: 19200
1272 * =5: 38400
1273 * =6: 57600
1274 * =7: 115200
1275 * =8: 230400
1276 )))
1277 |(% style="width:173px" %)Data bit|(% style="width:122px" %)HSW10096|(% colspan="2" style="width:506px" %)(((
1278 * =7: 7 bit
1279 * =8: 8 bit
1280 )))
1281 |(% style="width:173px" %)Stop bit|(% style="width:122px" %)HSW10097|(% colspan="2" style="width:506px" %)(((
1282 * =1: 1 bit
1283 * =2: 2 bit
1284 )))
1285 |(% style="width:173px" %)Check bit|(% style="width:122px" %)HSW10098|(% colspan="2" style="width:506px" %)(((
1286 * =0: None
1287 * =1: ODD
1288 * =2: EVEN
1289 )))
1290 |(% style="width:173px" %)Wait timeout|(% style="width:122px" %)HSW10099|(% colspan="2" style="width:506px" %)(((
1291 * Unit: ms.
1292 * Range: 0 to 30000
1293 )))
1294 |(% style="width:173px" %)receive timeout|(% style="width:122px" %)HSW10100|(% colspan="2" style="width:506px" %)(((
1295 * Unit: ms.
1296 * Range: 0 to 30000
1297 )))
1298 |(% style="width:173px" %)Retry time|(% style="width:122px" %)HSW10101|(% colspan="2" style="width:506px" %)(((
1299 * Unit: times.
1300 * Range: 0 to 100
1301 )))
1302 |(% style="width:173px" %)Retry timeout|(% style="width:122px" %)HSW10102|(% colspan="2" style="width:506px" %)(((
1303 * Unit: s.
1304 * Range: 0 to 30
1305 )))
1306 |(% style="width:173px" %)HMI station number|(% style="width:122px" %)HSW10103|(% colspan="2" style="width:506px" %)
1307 |(% style="width:173px" %)PLC station number|(% style="width:122px" %)HSW10104|(% colspan="2" style="width:506px" %)
1308 |(% colspan="1" rowspan="11" style="width:102px" %)COM1-3|(% style="width:173px" %)Communication mode|(% style="width:122px" %)HSW10120|(% colspan="2" style="width:506px" %)(((
1309 * =0: RS232
1310 * =1: RS485
1311 * =2: RS422
1312 * =6: RS485-2
1313 )))
1314 |(% style="width:173px" %)Baud rate|(% style="width:122px" %)HSW10121|(% colspan="2" style="width:506px" %)(((
1315 * =0: 1200
1316 * =1: 2400
1317 * =2: 4800
1318 * =3: 9600
1319 * =4: 19200
1320 * =5: 38400
1321 * =6: 57600
1322 * =7: 115200
1323 * =8: 230400
1324 )))
1325 |(% style="width:173px" %)Data bit|(% style="width:122px" %)HSW10122|(% colspan="2" style="width:506px" %)(((
1326 * =7: 7 bit
1327 * =8: 8 bit
1328 )))
1329 |(% style="width:173px" %)Stop bit|(% style="width:122px" %)HSW10123|(% colspan="2" style="width:506px" %)(((
1330 * =1: 1 bit
1331 * =2: 2 bit
1332 )))
1333 |(% style="width:173px" %)Check bit|(% style="width:122px" %)HSW10124|(% colspan="2" style="width:506px" %)(((
1334 * =0: None
1335 * =1: ODD
1336 * =2: EVEN
1337 )))
1338 |(% style="width:173px" %)Wait timeout|(% style="width:122px" %)HSW10125|(% colspan="2" style="width:506px" %)(((
1339 * Unit: ms.
1340 * Range: 0 to 30000
1341 )))
1342 |(% style="width:173px" %)receive timeout|(% style="width:122px" %)HSW10126|(% colspan="2" style="width:506px" %)(((
1343 * Unit: ms.
1344 * Range: 0 to 30000
1345 )))
1346 |(% style="width:173px" %)Retry time|(% style="width:122px" %)HSW10127|(% colspan="2" style="width:506px" %)(((
1347 * Unit: times.
1348 * Range: 0 to 100
1349 )))
1350 |(% style="width:173px" %)Retry timeout|(% style="width:122px" %)HSW10128|(% colspan="2" style="width:506px" %)(((
1351 * Unit: s.
1352 * Range: 0 to 30
1353 )))
1354 |(% style="width:173px" %)HMI station number|(% style="width:122px" %)HSW10129|(% colspan="2" style="width:506px" %)
1355 |(% style="width:173px" %)PLC station number|(% style="width:122px" %)HSW10130|(% colspan="2" style="width:506px" %)
1356 |(% colspan="1" rowspan="11" style="width:102px" %)COM2|(% style="width:173px" %)Communication mode|(% style="width:122px" %)HSW10072|(% colspan="2" style="width:506px" %)(((
1357 * =0: RS232
1358 * =1: RS485
1359 )))
1360 |(% style="width:173px" %)Baud rate|(% style="width:122px" %)HSW10073|(% colspan="2" style="width:506px" %)(((
1361 * =0: 1200
1362 * =1: 2400
1363 * =2: 4800
1364 * =3: 9600
1365 * =4: 19200
1366 * =5: 38400
1367 * =6: 57600
1368 * =7: 115200
1369 * =8: 230400
1370 )))
1371 |(% style="width:173px" %)Data bit|(% style="width:122px" %)HSW10074|(% colspan="2" style="width:506px" %)(((
1372 * =7: 7 bit
1373 * =8: 8 bit
1374 )))
1375 |(% style="width:173px" %)Stop bit|(% style="width:122px" %)HSW10075|(% colspan="2" style="width:506px" %)(((
1376 * =1: 1 bit
1377 * =2: 2 bit
1378 )))
1379 |(% style="width:173px" %)Check bit|(% style="width:122px" %)HSW10076|(% colspan="2" style="width:506px" %)(((
1380 * =0: None
1381 * =1: ODD
1382 * =2: EVEN
1383 )))
1384 |(% style="width:173px" %)Wait timeout|(% style="width:122px" %)HSW10077|(% colspan="2" style="width:506px" %)(((
1385 * Unit: ms.
1386 * Range: 0 to 30000
1387 )))
1388 |(% style="width:173px" %)receive timeout|(% style="width:122px" %)HSW10078|(% colspan="2" style="width:506px" %)(((
1389 * Unit: ms.
1390 * Range: 0 to 30000
1391 )))
1392 |(% style="width:173px" %)Retry time|(% style="width:122px" %)HSW10079|(% colspan="2" style="width:506px" %)(((
1393 * Unit: times.
1394 * Range: 0 to 100
1395 )))
1396 |(% style="width:173px" %)Retry timeout|(% style="width:122px" %)HSW10080|(% colspan="2" style="width:506px" %)(((
1397 * Unit: s.
1398 * Range: 0 to 30
1399 )))
1400 |(% style="width:173px" %)HMI station number|(% style="width:122px" %)HSW10081|(% colspan="2" style="width:506px" %)
1401 |(% style="width:173px" %)PLC station number|(% style="width:122px" %)HSW10082|(% colspan="2" style="width:506px" %)
1402 |(% colspan="1" rowspan="11" style="width:102px" %)COM2-2|(% style="width:173px" %)Communication mode|(% style="width:122px" %)HSW10105|(% colspan="2" style="width:506px" %)(((
1403 * =0: RS232
1404 * =1: RS485
1405 )))
1406 |(% style="width:173px" %)Baud rate|(% style="width:122px" %)HSW10106|(% colspan="2" style="width:506px" %)(((
1407 * =0: 1200
1408 * =1: 2400
1409 * =2: 4800
1410 * =3: 9600
1411 * =4: 19200
1412 * =5: 38400
1413 * =6: 57600
1414 * =7: 115200
1415 * =8: 230400
1416 )))
1417 |(% style="width:173px" %)Data bit|(% style="width:122px" %)HSW10107|(% colspan="2" style="width:506px" %)(((
1418 * =7: 7 bit
1419 * =8: 8 bit
1420 )))
1421 |(% style="width:173px" %)Stop bit|(% style="width:122px" %)HSW10108|(% colspan="2" style="width:506px" %)(((
1422 * =1: 1 bit
1423 * =2: 2 bit
1424 )))
1425 |(% style="width:173px" %)Check bit|(% style="width:122px" %)HSW10109|(% colspan="2" style="width:506px" %)(((
1426 * =0: None
1427 * =1: ODD
1428 * =2: EVEN
1429 )))
1430 |(% style="width:173px" %)Wait timeout|(% style="width:122px" %)HSW10110|(% colspan="2" style="width:506px" %)(((
1431 * Unit: ms.
1432 * Range: 0 to 30000
1433 )))
1434 |(% style="width:173px" %)receive timeout|(% style="width:122px" %)HSW10111|(% colspan="2" style="width:506px" %)(((
1435 * Unit: ms.
1436 * Range: 0 to 30000
1437 )))
1438 |(% style="width:173px" %)Retry time|(% style="width:122px" %)HSW10112|(% colspan="2" style="width:506px" %)(((
1439 * Unit: times.
1440 * Range: 0 to 100
1441 )))
1442 |(% style="width:173px" %)Retry timeout|(% style="width:122px" %)HSW10113|(% colspan="2" style="width:506px" %)(((
1443 * Unit: s.
1444 * Range: 0 to 30
1445 )))
1446 |(% style="width:173px" %)HMI station number|(% style="width:122px" %)HSW10114|(% colspan="2" style="width:506px" %)
1447 |(% style="width:173px" %)PLC station number|(% style="width:122px" %)HSW10115|(% colspan="2" style="width:506px" %)
1448 |(% colspan="1" rowspan="11" style="width:102px" %)COM3|(% style="width:173px" %)Communication mode|(% style="width:122px" %)HSW10083|(% colspan="2" style="width:506px" %)(((
1449 * =1: RS485
1450 )))
1451 |(% style="width:173px" %)Baud rate|(% style="width:122px" %)HSW10084|(% colspan="2" style="width:506px" %)(((
1452 * =0: 1200
1453 * =1: 2400
1454 * =2: 4800
1455 * =3: 9600
1456 * =4: 19200
1457 * =5: 38400
1458 * =6: 57600
1459 * =7: 115200
1460 * =8: 230400
1461 )))
1462 |(% style="width:173px" %)Data bit|(% style="width:122px" %)HSW10085|(% colspan="2" style="width:506px" %)(((
1463 * =7: 7 bit
1464 * =8: 8 bit
1465 )))
1466 |(% style="width:173px" %)Stop bit|(% style="width:122px" %)HSW10086|(% colspan="2" style="width:506px" %)(((
1467 * =1: 1 bit
1468 * =2: 2 bit
1469 )))
1470 |(% style="width:173px" %)Check bit|(% style="width:122px" %)HSW10087|(% colspan="2" style="width:506px" %)(((
1471 * =0: None
1472 * =1: ODD
1473 * =2: EVEN
1474 )))
1475 |(% style="width:173px" %)Wait timeout|(% style="width:122px" %)HSW10088|(% colspan="2" style="width:506px" %)(((
1476 * Unit: ms.
1477 * Range: 0 to 30000
1478 )))
1479 |(% style="width:173px" %)receive timeout|(% style="width:122px" %)HSW10089|(% colspan="2" style="width:506px" %)(((
1480 * Unit: ms.
1481 * Range: 0 to 30000
1482 )))
1483 |(% style="width:173px" %)Retry time|(% style="width:122px" %)HSW10090|(% colspan="2" style="width:506px" %)(((
1484 * Unit: times.
1485 * Range: 0 to 100
1486 )))
1487 |(% style="width:173px" %)Retry timeout|(% style="width:122px" %)HSW10091|(% colspan="2" style="width:506px" %)(((
1488 * Unit: s.
1489 * Range: 0 to 30
1490 )))
1491 |(% style="width:173px" %)HMI station number|(% style="width:122px" %)HSW10092|(% colspan="2" style="width:506px" %)
1492 |(% style="width:173px" %)PLC station number|(% style="width:122px" %)HSW10093|(% colspan="2" style="width:506px" %)
1493 |(% colspan="1" rowspan="2" style="width:102px" %)CAN port|(% style="width:173px" %)CAN1 baud rate|(% style="width:122px" %)HSW010116|(% style="width:299px" %)(((
1494 Unit: K, the baud rate must be an integer.
1495
1496 For example, when the baud rate required is 250000, just enter 250.
1497 )))|(% colspan="1" rowspan="2" style="width:218px" %)**✎Note: **If baud rate has been modified,please wait 5 seconds,then restart the HMI to take effect.
1498 |(% style="width:173px" %)CAN2 baud rate|(% style="width:122px" %)HSW010117|(% style="width:299px" %)(((
1499 Unit: K, the baud rate must be an integer.
1500
1501 For example, when the baud rate required is 250000, just enter 250.
1502 )))
1503
1504 == Ethernet communication configuration ==
1505
1506 (% class="table-bordered" %)
1507 |(% style="width:40px" %)**No.**|(% style="width:295px" %)**Function**|(% style="width:220px" %)**Address**|(% style="width:336px" %)**Description**
1508 |(% rowspan="7" style="width:40px" %)1|(% colspan="1" rowspan="7" style="width:295px" %)Ethernet parameter configuration for communication number 1 in list. Configure those addresses according to connected device. After configuration, wait for 5 seconds and restart the HMI.|(% style="width:220px" %)HSW11004|(% style="width:336px" %)Device IP address high word 1
1509 |(% style="width:220px" %)HSW11005|(% style="width:336px" %)Device IP address high word 2
1510 |(% style="width:220px" %)HSW11006|(% style="width:336px" %)Device IP address high word 3
1511 |(% style="width:220px" %)HSW11007|(% style="width:336px" %)Device IP address high word 4
1512 |(% style="width:220px" %)HSW11008|(% style="width:336px" %)Device Port number
1513 |(% style="width:220px" %)HSW11009|(% style="width:336px" %)(((
1514 ~=2 TCP
1515
1516 ~=3 UDP
1517 )))
1518 |(% style="width:220px" %)HSW11010|(% style="width:336px" %)Reserved
1519 |(% rowspan="7" style="width:40px" %)2|(% colspan="1" rowspan="7" style="width:295px" %)Ethernet parameter configuration for communication number 2 in list. Configure those addresses according to connected device. After configuration, wait for 5 seconds and restart the HMI.|(% style="width:220px" %)HSW11011|(% style="width:336px" %)Device IP address high word 1
1520 |(% style="width:220px" %)HSW11012|(% style="width:336px" %)Device IP address high word 2
1521 |(% style="width:220px" %)HSW11013|(% style="width:336px" %)Device IP address high word 3
1522 |(% style="width:220px" %)HSW11014|(% style="width:336px" %)Device IP address high word 4
1523 |(% style="width:220px" %)HSW11015|(% style="width:336px" %)Device Port number
1524 |(% style="width:220px" %)HSW11016|(% style="width:336px" %)(((
1525 ~=2 TCP
1526
1527 ~=3 UDP
1528 )))
1529 |(% style="width:220px" %)HSW11017|(% style="width:336px" %)Reserved
1530 |(% style="width:40px" %)…|(% style="width:295px" %) |(% style="width:220px" %)…|(% style="width:336px" %)…
1531 |(% rowspan="7" style="width:40px" %)32|(% colspan="1" rowspan="7" style="width:295px" %)Ethernet parameter configuration for communication number 32 in list. Configure those addresses according to connected device. After configuration, wait for 5 seconds and restart the HMI.|(% style="width:220px" %)HSW11221|(% style="width:336px" %)Device IP address high word 1
1532 |(% style="width:220px" %)HSW11222|(% style="width:336px" %)Device IP address high word 2
1533 |(% style="width:220px" %)HSW11223|(% style="width:336px" %)Device IP address high word 3
1534 |(% style="width:220px" %)HSW11224|(% style="width:336px" %)Device IP address high word 4
1535 |(% style="width:220px" %)HSW11225|(% style="width:336px" %)Device Port number
1536 |(% style="width:220px" %)HSW11226|(% style="width:336px" %)(((
1537 ~=2 TCP;
1538
1539 ~=3 UDP
1540 )))
1541 |(% style="width:220px" %)HSW11227|(% style="width:336px" %)Reserved
1542
1543 (% class="box infomessage" %)
1544 (((
1545 **✎Note:** The number of Ethernet connections supported by different HMI series varies.
1546 )))
1547
1548 == Communication control ==
1549
1550 (% class="table-bordered" %)
1551 |=(% style="width: 135px;" %)**Communication No.**|=(% style="width: 102px;" %)**Station No.**|=(% style="width: 185px;" %)**Control bit**|=(% style="width: 191px;" %)**Communication lamp**|=(% style="width: 271px;" %)**Description**
1552 |(% colspan="1" rowspan="16" style="width:135px" %)1|(% style="width:102px" %)0~~15|(% style="width:185px" %)HSX550.0～HSX550.15|(% style="width:191px" %)HSX558.0～HSX558.15|(% rowspan="160" style="width:271px" %)Communication number refers to the number in "Communication Port Configuration". A number provides 256 device station numbers. Each station number corresponds to a communication control bit and a communication indicator bit. Registers HSX550.0 to HSX805.15 are used to control the station numbers from 0 to 127, and registers HSX1150.0 to HSX1405.15 are used to control station numbers 128 to 255.
1553 |(% style="width:102px" %)16~~31|(% style="width:185px" %)HSX551.0～HSX551.15|(% style="width:191px" %)HSX559.0～HSX559.15
1554 |(% style="width:102px" %)32~~47|(% style="width:185px" %)HSX552.0～HSX552.15|(% style="width:191px" %)HSX560.0～HSX560.15
1555 |(% style="width:102px" %)48~~63|(% style="width:185px" %)HSX553.0～HSX553.15|(% style="width:191px" %)HSX561.0～HSX561.15
1556 |(% style="width:102px" %)64～79|(% style="width:185px" %)HSX554.0～HSX554.15|(% style="width:191px" %)HSX562.0～HSX562.15
1557 |(% style="width:102px" %)80～95|(% style="width:185px" %)HSX555.0～HSX555.15|(% style="width:191px" %)HSX563.0～HSX563.15
1558 |(% style="width:102px" %)96～111|(% style="width:185px" %)HSX556.0～HSX556.15|(% style="width:191px" %)HSX564.0～HSX564.15
1559 |(% style="width:102px" %)112～127|(% style="width:185px" %)HSX557.0～HSX557.15|(% style="width:191px" %)HSX565.0～HSX565.15
1560 |(% style="width:102px" %)128～143|(% style="width:185px" %)HSX1150.0～HSX1150.15|(% style="width:191px" %)HSX1158.0～HSX1158.15
1561 |(% style="width:102px" %)144～159|(% style="width:185px" %)HSX1151.0～HSX1151.15|(% style="width:191px" %)HSX1159.0～HSX1159.15
1562 |(% style="width:102px" %)160～175|(% style="width:185px" %)HSX1152.0～HSX1152.15|(% style="width:191px" %)HSX1160.0～HSX1160.15
1563 |(% style="width:102px" %)176～191|(% style="width:185px" %)HSX1153.0～HSX1153.15|(% style="width:191px" %)HSX1161.0～HSX1161.15
1564 |(% style="width:102px" %)192～207|(% style="width:185px" %)HSX1154.0～HSX1154.15|(% style="width:191px" %)HSX1162.0～HSX1162.15
1565 |(% style="width:102px" %)208～223|(% style="width:185px" %)HSX1155.0～HSX1155.15|(% style="width:191px" %)HSX1163.0～HSX1163.15
1566 |(% style="width:102px" %)224～239|(% style="width:185px" %)HSX1156.0～HSX1156.15|(% style="width:191px" %)HSX1164.0～HSX1164.15
1567 |(% style="width:102px" %)240～255|(% style="width:185px" %)HSX1157.0～HSX1157.15|(% style="width:191px" %)HSX1165.0～HSX1165.15
1568 |(% colspan="1" rowspan="16" style="width:135px" %)2|(% style="width:102px" %)0～15|(% style="width:185px" %)HSX566.0～HSX566.15|(% style="width:191px" %)HSX574.0～HSX574.15
1569 |(% style="width:102px" %)16～31|(% style="width:185px" %)HSX567.0～HSX567.15|(% style="width:191px" %)HSX575.0～HSX575.15
1570 |(% style="width:102px" %)32～47|(% style="width:185px" %)HSX568.0～HSX568.15|(% style="width:191px" %)HSX576.0～HSX576.15
1571 |(% style="width:102px" %)48～63|(% style="width:185px" %)HSX569.0～HSX569.15|(% style="width:191px" %)HSX577.0～HSX577.15
1572 |(% style="width:102px" %)64～79|(% style="width:185px" %)HSX570.0～HSX570.15|(% style="width:191px" %)HSX578.0～HSX578.15
1573 |(% style="width:102px" %)80～95|(% style="width:185px" %)HSX571.0～HSX571.15|(% style="width:191px" %)HSX579.0～HSX579.15
1574 |(% style="width:102px" %)96～111|(% style="width:185px" %)HSX572.0～HSX572.15|(% style="width:191px" %)HSX580.0～HSX580.15
1575 |(% style="width:102px" %)112～127|(% style="width:185px" %)HSX573.0～HSX573.15|(% style="width:191px" %)HSX581.0～HSX581.15
1576 |(% style="width:102px" %)128～143|(% style="width:185px" %)HSX1166.0～HSX1166.15|(% style="width:191px" %)HSX1174.0～HSX1174.15
1577 |(% style="width:102px" %)144～159|(% style="width:185px" %)HSX1167.0～HSX1167.15|(% style="width:191px" %)HSX1175.0～HSX1175.15
1578 |(% style="width:102px" %)160～175|(% style="width:185px" %)HSX1168.0～HSX1168.15|(% style="width:191px" %)HSX1176.0～HSX1176.15
1579 |(% style="width:102px" %)176～191|(% style="width:185px" %)HSX1169.0～HSX1169.15|(% style="width:191px" %)HSX1177.0～HSX1177.15
1580 |(% style="width:102px" %)192～207|(% style="width:185px" %)HSX1170.0～HSX1170.15|(% style="width:191px" %)HSX1178.0～HSX1178.15
1581 |(% style="width:102px" %)208～223|(% style="width:185px" %)HSX1171.0～HSX1171.15|(% style="width:191px" %)HSX1179.0～HSX1179.15
1582 |(% style="width:102px" %)224～239|(% style="width:185px" %)HSX1172.0～HSX1172.15|(% style="width:191px" %)HSX1180.0～HSX1180.15
1583 |(% style="width:102px" %)240～255|(% style="width:185px" %)HSX1173.0～HSX1173.15|(% style="width:191px" %)HSX1181.0～HSX1181.15
1584 |(% colspan="1" rowspan="16" style="width:135px" %)3|(% style="width:102px" %)0～15|(% style="width:185px" %)HSX582.0～HSX582.15|(% style="width:191px" %)HSX590.0～HSX590.15
1585 |(% style="width:102px" %)16～31|(% style="width:185px" %)HSX583.0～HSX583.15|(% style="width:191px" %)HSX591.0～HSX591.15
1586 |(% style="width:102px" %)32～47|(% style="width:185px" %)HSX584.0～HSX584.15|(% style="width:191px" %)HSX592.0～HSX592.15
1587 |(% style="width:102px" %)48～63|(% style="width:185px" %)HSX585.0～HSX585.15|(% style="width:191px" %)HSX593.0～HSX593.15
1588 |(% style="width:102px" %)64～79|(% style="width:185px" %)HSX586.0～HSX586.15|(% style="width:191px" %)HSX594.0～HSX594.15
1589 |(% style="width:102px" %)80～95|(% style="width:185px" %)HSX587.0～HSX587.15|(% style="width:191px" %)HSX595.0～HSX595.15
1590 |(% style="width:102px" %)96～111|(% style="width:185px" %)HSX588.0～HSX588.15|(% style="width:191px" %)HSX596.0～HSX596.15
1591 |(% style="width:102px" %)112～127|(% style="width:185px" %)HSX589.0～HSX589.15|(% style="width:191px" %)HSX597.0～HSX597.15
1592 |(% style="width:102px" %)128～143|(% style="width:185px" %)HSX1182.0～HSX1182.15|(% style="width:191px" %)HSX1190.0～HSX1190.15
1593 |(% style="width:102px" %)144～159|(% style="width:185px" %)HSX1183.0～HSX1183.15|(% style="width:191px" %)HSX1191.0～HSX1191.15
1594 |(% style="width:102px" %)160～175|(% style="width:185px" %)HSX1184.0～HSX1184.15|(% style="width:191px" %)HSX1192.0～HSX1192.15
1595 |(% style="width:102px" %)176～191|(% style="width:185px" %)HSX1185.0～HSX1185.15|(% style="width:191px" %)HSX1193.0～HSX1193.15
1596 |(% style="width:102px" %)192～207|(% style="width:185px" %)HSX1186.0～HSX1186.15|(% style="width:191px" %)HSX1194.0～HSX1194.15
1597 |(% style="width:102px" %)208～223|(% style="width:185px" %)HSX1187.0～HSX1187.15|(% style="width:191px" %)HSX1195.0～HSX1195.15
1598 |(% style="width:102px" %)224～239|(% style="width:185px" %)HSX1188.0～HSX1188.15|(% style="width:191px" %)HSX1196.0～HSX1196.15
1599 |(% style="width:102px" %)240～255|(% style="width:185px" %)HSX1189.0～HSX1189.15|(% style="width:191px" %)HSX1197.0～HSX1197.15
1600 |(% colspan="1" rowspan="16" style="width:135px" %)4|(% style="width:102px" %)0～15|(% style="width:185px" %)HSX598.0～HSX598.15|(% style="width:191px" %)HSX606.0～HSX606.15
1601 |(% style="width:102px" %)16～31|(% style="width:185px" %)HSX599.0～HSX599.15|(% style="width:191px" %)HSX607.0～HSX607.15
1602 |(% style="width:102px" %)32～47|(% style="width:185px" %)HSX600.0～HSX600.15|(% style="width:191px" %)HSX608.0～HSX608.15
1603 |(% style="width:102px" %)48～63|(% style="width:185px" %)HSX601.0～HSX601.15|(% style="width:191px" %)HSX609.0～HSX609.15
1604 |(% style="width:102px" %)64～79|(% style="width:185px" %)HSX602.0～HSX602.15|(% style="width:191px" %)HSX610.0～HSX610.15
1605 |(% style="width:102px" %)80～95|(% style="width:185px" %)HSX603.0～HSX603.15|(% style="width:191px" %)HSX611.0～HSX611.15
1606 |(% style="width:102px" %)96～111|(% style="width:185px" %)HSX604.0～HSX604.15|(% style="width:191px" %)HSX612.0～HSX612.15
1607 |(% style="width:102px" %)112～127|(% style="width:185px" %)HSX605.0～HSX605.15|(% style="width:191px" %)HSX613.0～HSX613.15
1608 |(% style="width:102px" %)128～143|(% style="width:185px" %)HSX1198.0～HSX1198.15|(% style="width:191px" %)HSX1206.0～HSX1206.15
1609 |(% style="width:102px" %)144～159|(% style="width:185px" %)HSX1199.0～HSX1199.15|(% style="width:191px" %)HSX1207.0～HSX1207.15
1610 |(% style="width:102px" %)160～175|(% style="width:185px" %)HSX1200.0～HSX1200.15|(% style="width:191px" %)HSX1208.0～HSX1208.15
1611 |(% style="width:102px" %)176～191|(% style="width:185px" %)HSX1201.0～HSX1201.15|(% style="width:191px" %)HSX1209.0～HSX1209.15
1612 |(% style="width:102px" %)192～207|(% style="width:185px" %)HSX1202.0～HSX1202.15|(% style="width:191px" %)HSX1210.0～HSX1210.15
1613 |(% style="width:102px" %)208～223|(% style="width:185px" %)HSX1203.0～HSX1203.15|(% style="width:191px" %)HSX1211.0～HSX1211.15
1614 |(% style="width:102px" %)224～239|(% style="width:185px" %)HSX1204.0～HSX1204.15|(% style="width:191px" %)HSX1212.0～HSX1212.15
1615 |(% style="width:102px" %)240～255|(% style="width:185px" %)HSX1205.0～HSX1205.15|(% style="width:191px" %)HSX1213.0～HSX1213.15
1616 |(% colspan="1" rowspan="16" style="width:135px" %)5|(% style="width:102px" %)0～15|(% style="width:185px" %)HSX614.0～HSX614.15|(% style="width:191px" %)HSX622.0～HSX622.15
1617 |(% style="width:102px" %)16～31|(% style="width:185px" %)HSX615.0～HSX615.15|(% style="width:191px" %)HSX623.0～HSX623.15
1618 |(% style="width:102px" %)32～47|(% style="width:185px" %)HSX616.0～HSX616.15|(% style="width:191px" %)HSX624.0～HSX624.15
1619 |(% style="width:102px" %)48～63|(% style="width:185px" %)HSX617.0～HSX617.15|(% style="width:191px" %)HSX625.0～HSX625.15
1620 |(% style="width:102px" %)64～79|(% style="width:185px" %)HSX618.0～HSX618.15|(% style="width:191px" %)HSX626.0～HSX626.15
1621 |(% style="width:102px" %)80～95|(% style="width:185px" %)HSX619.0～HSX619.15|(% style="width:191px" %)HSX627.0～HSX627.15
1622 |(% style="width:102px" %)96～111|(% style="width:185px" %)HSX620.0～HSX620.15|(% style="width:191px" %)HSX628.0～HSX628.15
1623 |(% style="width:102px" %)112～127|(% style="width:185px" %)HSX621.0～HSX621.15|(% style="width:191px" %)HSX629.0～HSX629.15
1624 |(% style="width:102px" %)128～143|(% style="width:185px" %)HSX1214.0～HSX1214.15|(% style="width:191px" %)HSX1222.0～HSX1222.15
1625 |(% style="width:102px" %)144～159|(% style="width:185px" %)HSX1215.0～HSX1215.15|(% style="width:191px" %)HSX1223.0～HSX1223.15
1626 |(% style="width:102px" %)160～175|(% style="width:185px" %)HSX1216.0～HSX1216.15|(% style="width:191px" %)HSX1224.0～HSX1224.15
1627 |(% style="width:102px" %)176～191|(% style="width:185px" %)HSX1217.0～HSX1217.15|(% style="width:191px" %)HSX1225.0～HSX1225.15
1628 |(% style="width:102px" %)192～207|(% style="width:185px" %)HSX1218.0～HSX1218.15|(% style="width:191px" %)HSX1226.0～HSX1226.15
1629 |(% style="width:102px" %)208～223|(% style="width:185px" %)HSX1219.0～HSX1219.15|(% style="width:191px" %)HSX1227.0～HSX1227.15
1630 |(% style="width:102px" %)224～239|(% style="width:185px" %)HSX1220.0～HSX1220.15|(% style="width:191px" %)HSX1228.0～HSX1228.15
1631 |(% style="width:102px" %)240～255|(% style="width:185px" %)HSX1221.0～HSX1221.15|(% style="width:191px" %)HSX1229.0～HSX1229.15
1632 |(% colspan="1" rowspan="16" style="width:135px" %)6|(% style="width:102px" %)0～15|(% style="width:185px" %)HSX630.0～HSX630.15|(% style="width:191px" %)HSX638.0～HSX638.15
1633 |(% style="width:102px" %)16～31|(% style="width:185px" %)HSX631.0～HSX631.15|(% style="width:191px" %)HSX639.0～HSX639.15
1634 |(% style="width:102px" %)32～47|(% style="width:185px" %)HSX632.0～HSX632.15|(% style="width:191px" %)HSX640.0～HSX640.15
1635 |(% style="width:102px" %)48～63|(% style="width:185px" %)HSX633.0～HSX633.15|(% style="width:191px" %)HSX641.0～HSX641.15
1636 |(% style="width:102px" %)64～79|(% style="width:185px" %)HSX634.0～HSX634.15|(% style="width:191px" %)HSX642.0～HSX642.15
1637 |(% style="width:102px" %)80～95|(% style="width:185px" %)HSX635.0～HSX635.15|(% style="width:191px" %)HSX643.0～HSX643.15
1638 |(% style="width:102px" %)96～111|(% style="width:185px" %)HSX636.0～HSX636.15|(% style="width:191px" %)HSX644.0～HSX644.15
1639 |(% style="width:102px" %)112～127|(% style="width:185px" %)HSX637.0～HSX637.15|(% style="width:191px" %)HSX645.0～HSX645.15
1640 |(% style="width:102px" %)128～143|(% style="width:185px" %)HSX1230.0～HSX1230.15|(% style="width:191px" %)HSX1238.0～HSX1238.15
1641 |(% style="width:102px" %)144～159|(% style="width:185px" %)HSX1231.0～HSX1231.15|(% style="width:191px" %)HSX1239.0～HSX1239.15
1642 |(% style="width:102px" %)160～175|(% style="width:185px" %)HSX1232.0～HSX1232.15|(% style="width:191px" %)HSX1240.0～HSX1240.15
1643 |(% style="width:102px" %)176～191|(% style="width:185px" %)HSX1233.0～HSX1233.15|(% style="width:191px" %)HSX1241.0～HSX1241.15
1644 |(% style="width:102px" %)192～207|(% style="width:185px" %)HSX1234.0～HSX1234.15|(% style="width:191px" %)HSX1242.0～HSX1242.15
1645 |(% style="width:102px" %)208～223|(% style="width:185px" %)HSX1235.0～HSX1235.15|(% style="width:191px" %)HSX1243.0～HSX1243.15
1646 |(% style="width:102px" %)224～239|(% style="width:185px" %)HSX1236.0～HSX1236.15|(% style="width:191px" %)HSX1244.0～HSX1244.15
1647 |(% style="width:102px" %)240～255|(% style="width:185px" %)HSX1237.0～HSX1237.15|(% style="width:191px" %)HSX1245.0～HSX1245.15
1648 |(% colspan="1" rowspan="16" style="width:135px" %)7|(% style="width:102px" %)0～15|(% style="width:185px" %)HSX646.0～HSX646.15|(% style="width:191px" %)HSX654.0～HSX654.15
1649 |(% style="width:102px" %)16～31|(% style="width:185px" %)HSX647.0～HSX647.15|(% style="width:191px" %)HSX655.0～HSX655.15
1650 |(% style="width:102px" %)32～47|(% style="width:185px" %)HSX648.0～HSX648.15|(% style="width:191px" %)HSX656.0～HSX656.15
1651 |(% style="width:102px" %)48～63|(% style="width:185px" %)HSX649.0～HSX649.15|(% style="width:191px" %)HSX657.0～HSX657.15
1652 |(% style="width:102px" %)64～79|(% style="width:185px" %)HSX650.0～HSX650.15|(% style="width:191px" %)HSX658.0～HSX658.15
1653 |(% style="width:102px" %)80～95|(% style="width:185px" %)HSX651.0～HSX651.15|(% style="width:191px" %)HSX659.0～HSX659.15
1654 |(% style="width:102px" %)96～111|(% style="width:185px" %)HSX652.0～HSX652.15|(% style="width:191px" %)HSX660.0～HSX660.15
1655 |(% style="width:102px" %)112～127|(% style="width:185px" %)HSX653.0～HSX653.15|(% style="width:191px" %)HSX661.0～HSX661.15
1656 |(% style="width:102px" %)128～143|(% style="width:185px" %)HSX1246.0～HSX1246.15|(% style="width:191px" %)HSX1254.0～HSX1254.15
1657 |(% style="width:102px" %)144～159|(% style="width:185px" %)HSX1247.0～HSX1247.15|(% style="width:191px" %)HSX1255.0～HSX1255.15
1658 |(% style="width:102px" %)160～175|(% style="width:185px" %)HSX1248.0～HSX1248.15|(% style="width:191px" %)HSX1256.0～HSX1256.15
1659 |(% style="width:102px" %)176～191|(% style="width:185px" %)HSX1249.0～HSX1249.15|(% style="width:191px" %)HSX1257.0～HSX1257.15
1660 |(% style="width:102px" %)192～207|(% style="width:185px" %)HSX1250.0～HSX1250.15|(% style="width:191px" %)HSX1258.0～HSX1258.15
1661 |(% style="width:102px" %)208～223|(% style="width:185px" %)HSX1251.0～HSX1251.15|(% style="width:191px" %)HSX1259.0～HSX1259.15
1662 |(% style="width:102px" %)224～239|(% style="width:185px" %)HSX1252.0～HSX1252.15|(% style="width:191px" %)HSX1260.0～HSX1260.15
1663 |(% style="width:102px" %)240～255|(% style="width:185px" %)HSX1253.0～HSX1253.15|(% style="width:191px" %)HSX1261.0～HSX1261.15
1664 |(% colspan="1" rowspan="16" style="width:135px" %)8|(% style="width:102px" %)0～15|(% style="width:185px" %)HSX662.0～HSX662.15|(% style="width:191px" %)HSX670.0～HSX670.15
1665 |(% style="width:102px" %)16～31|(% style="width:185px" %)HSX663.0～HSX663.15|(% style="width:191px" %)HSX671.0～HSX671.15
1666 |(% style="width:102px" %)32～47|(% style="width:185px" %)HSX664.0～HSX664.15|(% style="width:191px" %)HSX672.0～HSX672.15
1667 |(% style="width:102px" %)48～63|(% style="width:185px" %)HSX665.0～HSX665.15|(% style="width:191px" %)HSX673.0～HSX673.15
1668 |(% style="width:102px" %)64～79|(% style="width:185px" %)HSX666.0～HSX666.15|(% style="width:191px" %)HSX674.0～HSX674.15
1669 |(% style="width:102px" %)80～95|(% style="width:185px" %)HSX667.0～HSX667.15|(% style="width:191px" %)HSX675.0～HSX675.15
1670 |(% style="width:102px" %)96～111|(% style="width:185px" %)HSX668.0～HSX668.15|(% style="width:191px" %)HSX676.0～HSX676.15
1671 |(% style="width:102px" %)112～127|(% style="width:185px" %)HSX669.0～HSX669.15|(% style="width:191px" %)HSX677.0～HSX677.15
1672 |(% style="width:102px" %)128～143|(% style="width:185px" %)HSX1262.0～HSX1262.15|(% style="width:191px" %)HSX1270.0～HSX1270.15
1673 |(% style="width:102px" %)144～159|(% style="width:185px" %)HSX1263.0～HSX1263.15|(% style="width:191px" %)HSX1271.0～HSX1271.15
1674 |(% style="width:102px" %)160～175|(% style="width:185px" %)HSX1264.0～HSX1264.15|(% style="width:191px" %)HSX1272.0～HSX1272.15
1675 |(% style="width:102px" %)176～191|(% style="width:185px" %)HSX1265.0～HSX1265.15|(% style="width:191px" %)HSX1273.0～HSX1273.15
1676 |(% style="width:102px" %)192～207|(% style="width:185px" %)HSX1266.0～HSX1266.15|(% style="width:191px" %)HSX1274.0～HSX1274.15
1677 |(% style="width:102px" %)208～223|(% style="width:185px" %)HSX1267.0～HSX1267.15|(% style="width:191px" %)HSX1275.0～HSX1275.15
1678 |(% style="width:102px" %)224～239|(% style="width:185px" %)HSX1268.0～HSX1268.15|(% style="width:191px" %)HSX1276.0～HSX1276.15
1679 |(% style="width:102px" %)240～255|(% style="width:185px" %)HSX1269.0～HSX1269.15|(% style="width:191px" %)HSX1277.0～HSX1277.15
1680 |(% rowspan="4" style="width:135px" %)9|(% style="width:102px" %)0~~15|(% style="width:185px" %)HSX678.0~~678.15|(% style="width:191px" %)HSX686.0~~686.15
1681 |(% style="width:102px" %)16~~31|(% style="width:185px" %)HSX679.0~~679.15|(% style="width:191px" %)HSX687.0~~687.15
1682 |(% style="width:102px" %)32~~47|(% style="width:185px" %)HSX680.0~~680.15|(% style="width:191px" %)HSX688.0~~688.15
1683 |(% style="width:102px" %)48~~63|(% style="width:185px" %)HSX681.0~~681.15|(% style="width:191px" %)HSX689.0~~689.15
1684 |(% rowspan="4" style="width:135px" %)10|(% style="width:102px" %)0~~15|(% style="width:185px" %)HSX694.0~~694.15|(% style="width:191px" %)HSX702.0~~702.15
1685 |(% style="width:102px" %)16~~31|(% style="width:185px" %)HSX695.0~~695.15|(% style="width:191px" %)HSX703.0~~703.15
1686 |(% style="width:102px" %)32~~47|(% style="width:185px" %)HSX696.0~~696.15|(% style="width:191px" %)HSX704.0~~704.15
1687 |(% style="width:102px" %)48~~63|(% style="width:185px" %)HSX697.0~~697.15|(% style="width:191px" %)HSX705.0~~705.15
1688 |(% rowspan="4" style="width:135px" %)11|(% style="width:102px" %)0~~15|(% style="width:185px" %)HSX710.0~~710.15|(% style="width:191px" %)HSX718.0~~718.15
1689 |(% style="width:102px" %)16~~31|(% style="width:185px" %)HSX711.0~~711.15|(% style="width:191px" %)HSX719.0~~719.15
1690 |(% style="width:102px" %)32~~47|(% style="width:185px" %)HSX712.0~~712.15|(% style="width:191px" %)HSX720.0~~720.15
1691 |(% style="width:102px" %)48~~63|(% style="width:185px" %)HSX713.0~~713.15|(% style="width:191px" %)HSX721.0~~721.15
1692 |(% rowspan="4" style="width:135px" %)12|(% style="width:102px" %)0~~15|(% style="width:185px" %)HSX726.0~~726.15|(% style="width:191px" %)HSX734.0~~734.15
1693 |(% style="width:102px" %)16~~31|(% style="width:185px" %)HSX727.0~~727.15|(% style="width:191px" %)HSX735.0~~735.15
1694 |(% style="width:102px" %)32~~47|(% style="width:185px" %)HSX728.0~~728.15|(% style="width:191px" %)HSX736.0~~736.15
1695 |(% style="width:102px" %)48~~63|(% style="width:185px" %)HSX729.0~~729.15|(% style="width:191px" %)HSX737.0~~737.15
1696 |(% rowspan="4" style="width:135px" %)13|(% style="width:102px" %)0~~15|(% style="width:185px" %)HSX742.0~~742.15|(% style="width:191px" %)HSX750.0~~750.15
1697 |(% style="width:102px" %)16~~31|(% style="width:185px" %)HSX743.0~~743.15|(% style="width:191px" %)HSX751.0~~751.15
1698 |(% style="width:102px" %)32~~47|(% style="width:185px" %)HSX744.0~~744.15|(% style="width:191px" %)HSX752.0~~752.15
1699 |(% style="width:102px" %)48~~63|(% style="width:185px" %)HSX745.0~~745.15|(% style="width:191px" %)HSX753.0~~753.15
1700 |(% rowspan="4" style="width:135px" %)14|(% style="width:102px" %)0~~15|(% style="width:185px" %)HSX758.0~~758.15|(% style="width:191px" %)HSX766.0~~766.15
1701 |(% style="width:102px" %)16~~31|(% style="width:185px" %)HSX759.0~~759.15|(% style="width:191px" %)HSX767.0~~767.15
1702 |(% style="width:102px" %)32~~47|(% style="width:185px" %)HSX760.0~~760.15|(% style="width:191px" %)HSX768.0~~768.15
1703 |(% style="width:102px" %)48~~63|(% style="width:185px" %)HSX761.0~~761.15|(% style="width:191px" %)HSX769.0~~769.15
1704 |(% rowspan="4" style="width:135px" %)15|(% style="width:102px" %)0~~15|(% style="width:185px" %)HSX774.0~~774.15|(% style="width:191px" %)HSX782.0~~782.15
1705 |(% style="width:102px" %)16~~31|(% style="width:185px" %)HSX775.0~~775.15|(% style="width:191px" %)HSX783.0~~783.15
1706 |(% style="width:102px" %)32~~47|(% style="width:185px" %)HSX776.0~~776.15|(% style="width:191px" %)HSX784.0~~784.15
1707 |(% style="width:102px" %)48~~63|(% style="width:185px" %)HSX777.0~~777.15|(% style="width:191px" %)HSX785.0~~785.15
1708 |(% rowspan="4" style="width:135px" %)16|(% style="width:102px" %)0~~15|(% style="width:185px" %)HSX790.0~~790.15|(% style="width:191px" %)HSX798.0~~798.15
1709 |(% style="width:102px" %)16~~31|(% style="width:185px" %)HSX791.0~~791.15|(% style="width:191px" %)HSX799.0~~799.15
1710 |(% style="width:102px" %)32~~47|(% style="width:185px" %)HSX792.0~~792.15|(% style="width:191px" %)HSX800.0~~800.15
1711 |(% style="width:102px" %)48~~63|(% style="width:185px" %)HSX793.0~~793.15|(% style="width:191px" %)HSX801.0~~801.15