Wiki source code of 02 Special Function
Show last authors
| author | version | line-number | content |
|---|---|---|---|
| 1 | = **1 Only specific model HMI support all the functions listed below.** = | ||
| 2 | |||
| 3 | == **1 Camera** == | ||
| 4 | |||
| 5 | All free drive USB camera can be supported,but USB camera resolution can not beyond HMI resolution. all IP cameras that support ONVIF protocol and H.264 encoding can be used. | ||
| 6 | |||
| 7 | The following models are tested camera models: | ||
| 8 | |||
| 9 | 1) Hikvision | ||
| 10 | |||
| 11 | * DS-2CD1321D-I | ||
| 12 | * DS-2CD3T20FD-I3W | ||
| 13 | * DS-2CD1221D-I3 | ||
| 14 | * DS-2CV3Q21FD-IW | ||
| 15 | |||
| 16 | 2) Dahua | ||
| 17 | |||
| 18 | * DH-IPC-HFW1025D | ||
| 19 | * DH-IPC-HFW1235M-I1 | ||
| 20 | |||
| 21 | [[Download link>>url:https://drive.google.com/open?id=1jkErMKXk0fzFlipNxWObWAeRCzilxTG6]] | ||
| 22 | |||
| 23 | == **2 Email** == | ||
| 24 | |||
| 25 | WECON HMI can support setting some specified conditions to make the specified mail information are sent to the relevant recipient, but email sending is basis of the network. test apple | ||
| 26 | |||
| 27 | [[Download link>>url:https://drive.google.com/open?id=1rTOVxFgz8yy0d2c7wJU5Q34M-TVQcDkV]] | ||
| 28 | |||
| 29 | == **3 Printer** == | ||
| 30 | |||
| 31 | HMI supports USB printer and serial printer. Detail type of printer, please refer to download link. | ||
| 32 | |||
| 33 | Note: In theory, HMI can support all printers that use the ESC/POS command set. | ||
| 34 | |||
| 35 | [[Download link>>url:https://drive.google.com/open?id=1GyinEwYJphj2GDveGkmA5CQutejFwzxW]] | ||
| 36 | |||
| 37 | == **4 Remote Control** == | ||
| 38 | |||
| 39 | Here provides three solutions to remote control HMI. | ||
| 40 | |||
| 41 | Solution1: HMI must be PI8000 or PI9000 with -R. Remote control with WECON cloud server. | ||
| 42 | |||
| 43 | Solution2: HMI must be PI8000 or PI9000. Remote control by router. Detail information is as below link. | ||
| 44 | |||
| 45 | Solution3: HMI must be PI3000 with -O model. Remote control by HMI System Monitor. | ||
| 46 | |||
| 47 | [[Download link>>url:https://drive.google.com/open?id=1vkAKdEmuRWy55cz8xUyirxNBc5aK7Mbg]] | ||
| 48 | |||
| 49 | == **5 Short Message** == | ||
| 50 | |||
| 51 | This is the extend function in WECON HMI. Extended a SMS module that must support AT command to communicate with HMI. Alarm information could be sent to users by short message, and users could control HMI by sending short message. | ||
| 52 | |||
| 53 | [[Download link>>url:https://drive.google.com/open?id=1_hWRZ7YvzwpBVXJd3DRPJOLH_bAvWTVS]] | ||
| 54 | |||
| 55 | == **6 Multi-link** == | ||
| 56 | |||
| 57 | This function is for connect multi HMI by using same project in LAN network. | ||
| 58 | |||
| 59 | [[Download link>>https://drive.google.com/drive/folders/1ml4GQ4gU-42ikBIW8MaPAAJogWGtzSJX?usp=sharing]] |