Skip to Content

Wiki source code of 02 Special Function

Version 10.2 by Hunter on 2026/03/10 11:57
Show last authors
1 (% id="H1OnlyspecificmodelHMIsupportalltheA0functionslistedbelow." %)
2 = **1 Camera** =
3
4 {{error}}
5 ✎Note: PIStudio supports both IP cameras and USB cameras. However, **the currently available models do not support the USB camera function**. Therefore, IP cameras should be used with priority. For function capabilities, please refer to the [[Function Limits table>>doc:PIStudio.16 Appendix.WebHome||anchor="HPIStudioFunctionLimits"]]
6 {{/error}}
7
8 In theory, IP cameras supporting **H.264** and **ONVIF** can be connected to PI HMIs. Please ensure that the camera resolution and the camera object use the same aspect ratio as much as possible.
9
10 The following camera models have been tested and verified:
11
12 1) Hikvision
13
14 * DS-2CD1321D-I
15 * DS-2CD3T20FD-I3W
16 * DS-2CD1221D-I3
17 * DS-2CV3Q21FD-IW
18
19 2) Dahua
20
21 * DH-IPC-HFW1025D
22 * DH-IPC-HFW1235M-I1
23
24 3) EZVIZ
25
26 * CS-C6N
27
28 [[Download link>>https://ftp.we-con.com.cn/Download/WIKI/PI%20HMI/Demo/Special%20Function/New%20Demo/Camera%20FunctionsV2.zip]]
29
30 = **2 Email** =
31
32 PIStudio supports sending email to recipients.
33
34 {{info}}
35 For function capabilities, please refer to the [[Function Limits table>>doc:PIStudio.16 Appendix.WebHome||anchor="HPIStudioFunctionLimits"]]
36 {{/info}}
37
38 [[Download link>>https://ftp.we-con.com.cn/Download/WIKI/PI%20HMI/Demo/Special%20Function/Email%20Demo%20V1.2.zip]]
39
40 = **3 Printer** =
41
42 HMI supports USB printer and serial printer. Detail type of printer, please refer to download link.
43
44 [[Download link>>https://ftp.we-con.com.cn/Download/WIKI/PI%20HMI/Demo/Communication/printer%20demo%20v1.1.zip]]
45
46 = **4 Remote Control** =
47
48 Here provides three solutions to remote control HMI.
49
50 Solution1: HMI must be PI8000 or PI9000 with -R. Remote control with WECON cloud server.
51
52 Solution2: HMI must be PI8000 or PI9000. Remote control by router. Detail information is as below link.
53
54 Solution3: HMI must be PI3000 with -O model. Remote control by HMI System Monitor.
55
56 [[Download link>>https://ftp.we-con.com.cn/Download/WIKI/PI%20HMI/Demo/Special%20Function/Remote%20control-P%2BD%2BV-20241023T055612Z-001.zip]]
57
58 = **5 Short Message** =
59
60 This is the extend function in WECON HMI. Extended a SMS module that must support AT command to communicate with HMI. Alarm information could be sent to users by short message, and users could control HMI by sending short message.
61
62 [[Download link>>https://ftp.we-con.com.cn/Download/WIKI/PI%20HMI/Demo/Special%20Function/SMS-20241023T055847Z-001.zip]]
63
64 = **6 Multi-Link（V1.0）** =
65
66 This function is for connect multi HMI by using same project in LAN network.
67
68 [[Download link>>https://ftp.we-con.com.cn/Download/WIKI/PI%20HMI/Demo/Special%20Function/Multi%20Link-20241023T060038Z-001.zip]]
69
70 = **7 PI8150ig Video Display** =
71
72 This function is show PI8150ig's video playback.
73
74 [[Download link>>https://ftp.we-con.com.cn/Download/WIKI/PI%20HMI/Demo/Special%20Function/video%20display.zip]]
75
76 = 8 MQTT tool =
77
78 This function is link to MQTT server via MQTT tool in PIStudio。
79
80 [[Download link>>https://ftp.we-con.com.cn/Download/WIKI/PI%20HMI/Demo/Special%20Function/MQTT.rar]]