Skip to Content

Wiki source code of 02 Special Function

Version 2.1 by Stone Wu on 2022/06/17 16:41
Hide last authors
Stone Wu 2.1 1 (% class="lead" id="H1OnlyspecificmodelHMIsupportalltheA0functionslistedbelow." %)
2 **Only specific model HMI support all the functions listed below.**
Leo Wei 1.1 3
Stone Wu 2.1 4 = **1 Camera** =
Leo Wei 1.1 5
6 All free drive USB camera can be supported,but USB camera resolution can not beyond HMI resolution. all IP cameras that support ONVIF protocol and H.264 encoding can be used.
7
8 The following models are tested camera models:
9
10 1) Hikvision
11
12 * DS-2CD1321D-I
13 * DS-2CD3T20FD-I3W
14 * DS-2CD1221D-I3
15 * DS-2CV3Q21FD-IW
16
17 2) Dahua
18
19 * DH-IPC-HFW1025D
20 * DH-IPC-HFW1235M-I1
21
22 [[Download link>>url:https://drive.google.com/open?id=1jkErMKXk0fzFlipNxWObWAeRCzilxTG6]]
23
Stone Wu 2.1 24 = **2 Email** =
Leo Wei 1.1 25
26 WECON HMI can support setting some specified conditions to make the specified mail information are sent to the relevant recipient, but email sending is basis of the network. test apple
27
28 [[Download link>>url:https://drive.google.com/open?id=1rTOVxFgz8yy0d2c7wJU5Q34M-TVQcDkV]]
29
Stone Wu 2.1 30 = **3 Printer** =
Leo Wei 1.1 31
32 HMI supports USB printer and serial printer. Detail type of printer, please refer to download link.
33
34 Note: In theory, HMI can support all printers that use the ESC/POS command set.
35
36 [[Download link>>url:https://drive.google.com/open?id=1GyinEwYJphj2GDveGkmA5CQutejFwzxW]]
37
Stone Wu 2.1 38 = **4 Remote Control** =
Leo Wei 1.1 39
40 Here provides three solutions to remote control HMI.
41
42 Solution1: HMI must be PI8000 or PI9000 with -R. Remote control with WECON cloud server.
43
44 Solution2: HMI must be PI8000 or PI9000. Remote control by router. Detail information is as below link.
45
46 Solution3: HMI must be PI3000 with -O model. Remote control by HMI System Monitor.
47
48 [[Download link>>url:https://drive.google.com/open?id=1vkAKdEmuRWy55cz8xUyirxNBc5aK7Mbg]]
49
Stone Wu 2.1 50 = **5 Short Message** =
Leo Wei 1.1 51
52 This is the extend function in WECON HMI. Extended a SMS module that must support AT command to communicate with HMI. Alarm information could be sent to users by short message, and users could control HMI by sending short message.
53
54 [[Download link>>url:https://drive.google.com/open?id=1_hWRZ7YvzwpBVXJd3DRPJOLH_bAvWTVS]]
55
Stone Wu 2.1 56 = **6 Multi-link** =
Leo Wei 1.1 57
58 This function is for connect multi HMI by using same project in LAN network.
59
60 [[Download link>>https://drive.google.com/drive/folders/1ml4GQ4gU-42ikBIW8MaPAAJogWGtzSJX?usp=sharing]]