Wiki source code of 02 Special Function
Hide last authors
| author | version | line-number | content |
|---|---|---|---|
 |
1.1 | 1 | (% class="lead" id="H1OnlyspecificmodelHMIsupportalltheA0functionslistedbelow." %) |
| 2 | **Only specific model HMI support all the functions listed below.** | ||
| 3 | |||
| 4 | = **1 Camera** = | ||
| 5 | |||
| |
3.1 | 6 | {{error}} |
| 7 | ✎Note: PIStudio supports both IP cameras and USB cameras. However, the currently available models do not support the USB camera function. Therefore, IP cameras should be used with priority. For function capabilities, please refer to the Function Limits table. | ||
| 8 | {{/error}} | ||
| 9 | |||
| |
1.1 | 10 | All free drive USB camera can be supported,but USB camera resolution can not beyond HMI resolution. all IP cameras that support ONVIF protocol and H.264 encoding can be used. |
| 11 | |||
| 12 | The following models are tested camera models: | ||
| 13 | |||
| 14 | 1) Hikvision | ||
| 15 | |||
| 16 | * DS-2CD1321D-I | ||
| 17 | * DS-2CD3T20FD-I3W | ||
| 18 | * DS-2CD1221D-I3 | ||
| 19 | * DS-2CV3Q21FD-IW | ||
| 20 | |||
| 21 | 2) Dahua | ||
| 22 | |||
| 23 | * DH-IPC-HFW1025D | ||
| 24 | * DH-IPC-HFW1235M-I1 | ||
| 25 | |||
| 26 | [[Download link>>https://ftp.we-con.com.cn/Download/WIKI/PI%20HMI/Demo/Special%20Function/Camera%20Functions-20241023T055156Z-001.zip]] | ||
| 27 | |||
| 28 | = **2 Email** = | ||
| 29 | |||
| 30 | WECON HMI can support setting some specified conditions to make the specified mail information are sent to the relevant recipient, but email sending is basis of the network. (ie and IN series don't support Email function) | ||
| 31 | |||
| 32 | [[Download link>>https://ftp.we-con.com.cn/Download/WIKI/PI%20HMI/Demo/Special%20Function/Email%20Demo%20V1.2.zip]] | ||
| 33 | |||
| 34 | = **3 Printer** = | ||
| 35 | |||
| 36 | HMI supports USB printer and serial printer. Detail type of printer, please refer to download link. | ||
| 37 | |||
| 38 | [[Download link>>https://ftp.we-con.com.cn/Download/WIKI/PI%20HMI/Demo/Communication/printer%20demo%20v1.1.zip]] | ||
| 39 | |||
| 40 | = **4 Remote Control** = | ||
| 41 | |||
| 42 | Here provides three solutions to remote control HMI. | ||
| 43 | |||
| 44 | Solution1: HMI must be PI8000 or PI9000 with -R. Remote control with WECON cloud server. | ||
| 45 | |||
| 46 | Solution2: HMI must be PI8000 or PI9000. Remote control by router. Detail information is as below link. | ||
| 47 | |||
| 48 | Solution3: HMI must be PI3000 with -O model. Remote control by HMI System Monitor. | ||
| 49 | |||
| 50 | [[Download link>>https://ftp.we-con.com.cn/Download/WIKI/PI%20HMI/Demo/Special%20Function/Remote%20control-P%2BD%2BV-20241023T055612Z-001.zip]] | ||
| 51 | |||
| 52 | = **5 Short Message** = | ||
| 53 | |||
| 54 | This is the extend function in WECON HMI. Extended a SMS module that must support AT command to communicate with HMI. Alarm information could be sent to users by short message, and users could control HMI by sending short message. | ||
| 55 | |||
| 56 | [[Download link>>https://ftp.we-con.com.cn/Download/WIKI/PI%20HMI/Demo/Special%20Function/SMS-20241023T055847Z-001.zip]] | ||
| 57 | |||
| 58 | = **6 Multi-Link（V1.0）** = | ||
| 59 | |||
| 60 | This function is for connect multi HMI by using same project in LAN network. | ||
| 61 | |||
| 62 | [[Download link>>https://ftp.we-con.com.cn/Download/WIKI/PI%20HMI/Demo/Special%20Function/Multi%20Link-20241023T060038Z-001.zip]] | ||
| 63 | |||
| 64 | = **7 PI8150ig Video Display** = | ||
| 65 | |||
| 66 | This function is show PI8150ig's video playback. | ||
| 67 | |||
| 68 | [[Download link>>https://ftp.we-con.com.cn/Download/WIKI/PI%20HMI/Demo/Special%20Function/video%20display.zip]] | ||
| 69 | |||
| 70 | = 8 MQTT tool = | ||
| 71 | |||
| 72 | This function is link to MQTT server via MQTT tool in PIStudio。 | ||
| 73 | |||
| 74 | [[Download link>>https://ftp.we-con.com.cn/Download/WIKI/PI%20HMI/Demo/Special%20Function/MQTT.rar]] |