Wiki source code of 02 Special Function
Version 3.1 by Theodore Xu on 2023/04/26 10:52
Show last authors
| author | version | line-number | content |
|---|---|---|---|
| 1 | (% class="lead" id="H1OnlyspecificmodelHMIsupportalltheA0functionslistedbelow." %) | ||
| 2 | **Only specific model HMI support all the functions listed below.** | ||
| 3 | |||
| 4 | = **1 Camera** = | ||
| 5 | |||
| 6 | All free drive USB camera can be supported,but USB camera resolution can not beyond HMI resolution. all IP cameras that support ONVIF protocol and H.264 encoding can be used. | ||
| 7 | |||
| 8 | The following models are tested camera models: | ||
| 9 | |||
| 10 | 1) Hikvision | ||
| 11 | |||
| 12 | * DS-2CD1321D-I | ||
| 13 | * DS-2CD3T20FD-I3W | ||
| 14 | * DS-2CD1221D-I3 | ||
| 15 | * DS-2CV3Q21FD-IW | ||
| 16 | |||
| 17 | 2) Dahua | ||
| 18 | |||
| 19 | * DH-IPC-HFW1025D | ||
| 20 | * DH-IPC-HFW1235M-I1 | ||
| 21 | |||
| 22 | [[Download link>>url:https://drive.google.com/open?id=1jkErMKXk0fzFlipNxWObWAeRCzilxTG6]] | ||
| 23 | |||
| 24 | = **2 Email** = | ||
| 25 | |||
| 26 | WECON HMI can support setting some specified conditions to make the specified mail information are sent to the relevant recipient, but email sending is basis of the network. test apple | ||
| 27 | |||
| 28 | [[Download link>>url:https://drive.google.com/open?id=1rTOVxFgz8yy0d2c7wJU5Q34M-TVQcDkV]] | ||
| 29 | |||
| 30 | = **3 Printer** = | ||
| 31 | |||
| 32 | HMI supports USB printer and serial printer. Detail type of printer, please refer to download link. | ||
| 33 | |||
| 34 | Note: In theory, HMI can support all printers that use the ESC/POS command set. | ||
| 35 | |||
| 36 | [[Download link>>url:https://drive.google.com/open?id=1GyinEwYJphj2GDveGkmA5CQutejFwzxW]] | ||
| 37 | |||
| 38 | = **4 Remote Control** = | ||
| 39 | |||
| 40 | Here provides three solutions to remote control HMI. | ||
| 41 | |||
| 42 | Solution1: HMI must be PI8000 or PI9000 with -R. Remote control with WECON cloud server. | ||
| 43 | |||
| 44 | Solution2: HMI must be PI8000 or PI9000. Remote control by router. Detail information is as below link. | ||
| 45 | |||
| 46 | Solution3: HMI must be PI3000 with -O model. Remote control by HMI System Monitor. | ||
| 47 | |||
| 48 | [[Download link>>url:https://drive.google.com/open?id=1vkAKdEmuRWy55cz8xUyirxNBc5aK7Mbg]] | ||
| 49 | |||
| 50 | = **5 Short Message** = | ||
| 51 | |||
| 52 | This is the extend function in WECON HMI. Extended a SMS module that must support AT command to communicate with HMI. Alarm information could be sent to users by short message, and users could control HMI by sending short message. | ||
| 53 | |||
| 54 | [[Download link>>url:https://drive.google.com/open?id=1_hWRZ7YvzwpBVXJd3DRPJOLH_bAvWTVS]] | ||
| 55 | |||
| 56 | = **6 Multi-Link** = | ||
| 57 | |||
| 58 | This function is for connect multi HMI by using same project in LAN network. | ||
| 59 | |||
| 60 | [[Download link>>https://drive.google.com/drive/folders/1ml4GQ4gU-42ikBIW8MaPAAJogWGtzSJX?usp=sharing]] | ||
| 61 | |||
| 62 | = **7 PI8150ig Video Display** = | ||
| 63 | |||
| 64 | This function is show PI8150ig's video playback. | ||
| 65 | |||
| 66 | [[Download link>>https://ftp.we-con.com.cn/Download/WIKI/PI%20HMI/Demo/Special%20Function/video%20display.zip]] |