Skip to Content

Wiki source code of KEYENCE

Last modified by Wecon on 2025/09/03 21:03
Hide last authors
Wecon 1.1 1 = KV-5000(Ethernet) =
2
3 Supported Series: KEYENCE KV-5000, KV-5500 models
4
5 **HMI Settings**
6
7 |=**Item**|=**Settings**|=**Note**
8 |Protocol|KEYENCE KV-5000(Ethernet)|
9 |Connection|Ethernet|
10 |Port No.|8501|Need to be the same as PLC settings
11 |PLC station No.|0|
12
13 **Address List**
14
15 |=**Type**|=**Device registers**|=**Format**|=**Range**|=**Note**
16 |(% colspan="1" rowspan="4" %)Bit|R|RDDDDD.dd|0~~59915.15|Relay
17 |CR|CRDDDDD.dd|0~~3915.15|Control Relay
18 |MR|MRDDDDD.dd|0~~99915.15|Internal Auxiliary Relay
19 |LR|LRDDDDD.dd|0~~99915.15|Latch Relay
20 |(% colspan="1" rowspan="15" %)Word|DM|DMDDDDD|0~~65534|Data Memory
21 |CM|CMDDDDD|0~~11998|Control Memory
22 |TM|TMDDD|0~~511|Temporary Data Memory
23 |EM|EMDDDDD|0~~65534|Extension Data Memory
24 |FM|FMDDDDD|0~~32766|Extension Data Memory
25 |Z|ZDD|1~~12|Index Register
26 |VB|VBHHH|0~~F9F|Work Relay
27 |ZF|ZFDDDDD|0~~524287|File Register Serial Number System
28 |VM|VMDDDDD|0~~65535|Work Memory
29 |W|WHHHH|0~~7FFF|Link Register
30 |B|BHHH|0~~7FF|Link Relay
31 |R|RDDD|0~~999|Input Relay/Output Relay/Internal Auxiliary Relay
32 |CR|CRDDD|0~~999|Control Relay
33 |LR|LRDDD|0~~999|Latch Relay
34 |MR|MRDDDD|0~~3999|Internal Auxiliary Relay
35 |(% colspan="1" rowspan="9" %)Double Word|T|TDDDD|0~~9999|Timer
36 |C|CDDDD|0~~9999|Counter
37 |CTH|CTHD|0~~3|High-speed Counter Comparator(Current Value)
38 |CTC|CTCD|0~~7|High-speed Counter Comparator(Setting Value)
39 |TRM|TRMD|0~~7|Digital Trimmer
40 |C_Preset|C_PresetDDDD|0~~9999|Counter(Setting Value)
41 |C_Curr|C_CurrDDDD|0~~9999|Counter(Current Value)
42 |T_Preset|T_PresetDDDD|0~~9999|Timer(Setting Value)
43 |T_Curr|T_CurrDDDD|0~~9999|Timer(Current Value)
44
45 **PLC Settings**
46
47 Create the project according to the PLC specific model.
48
49 (% style="text-align:center" %)
50 [[image:KVsetup01.png]]
51
52 Enter the EtherNet/IP setting configuration window to check the PLC IP settings
53
54 (% style="text-align:center" %)
55 [[image:KVstep02.png]]
56
57 Double click the PLC unit icon on the main interface, then the settings would pop up on the right side.
58
59 (% style="text-align:center" %)
60 [[image:KVSetup03.png]]
61
62 So right now the PLC IP is 192.168.40.120
63
64 {{info}}
65 ✎Note: PLC uses port 8500 to communicate with the PC, and uses port 8501 to communicate with the HMI.
66 {{/info}}
67
68 (% style="text-align:center" %)
69 [[image:KVSetup04.png]]
70
71 Programming the PLC project
72
73 (% style="text-align:center" %)
74 [[image:PrgramKVStudio.png]]
75
76 Connect with PLC through known IP address.
77
78 (% style="text-align:center" %)
79 [[image:KVSetup05.png]]
80
81 Download the program into PLC
82
83 (% style="text-align:center" %)
84 [[image:KVSetup06.png]]
85
86 If shows like below, which means download is success
87
88 (% style="text-align:center" %)
89 [[image:KVSetup07.png]]
90
91 **Cable Wiring**
92
93 (% style="text-align:center" %)
94 [[image:12.PLC Protocol_html_2297240b57346b2a (1).png]]
95
96 = KV-8000(Ethernet) =
97
98 Supported Series: KEYENCE KV-8000 models
99
100 (% class="box infomessage" %)
101 (((
102 Note: Waiting official release
103 )))
104
105 **HMI Settings**
106
107 |=**Item**|=**Settings**|=**Note**
108 |Protocol|KEYENCE Ethernet/IP (KV-8000)|
109 |Connection|Ethernet|
110 |Port No.|8500|Need to be the same as PLC settings
111 |PLC station No.|0|
112
113 **Support Variable Type**
114
115 |=Data Type|=PIStudio Data Format
116 |=BOOL|Bit
117 |=INT|16-bit Unsigned/Binary/BCD/Hex
118 |=UINT|16-bit Unsigned/Binary/BCD/Hex
119 |=DINT|32-bit Signed/Binary/BCD/Hex
120 |=UDINT|32-bit Unsigned/Binary/BCD/Hex
121 |=REAL|32-bit Float
122 |=LREAL|64-bit Float
123 |=STRING|
124 |=Array|Bool/USINT/INT/UINT/DINT/Real/DINT/String
125
126 Choose the following protocol
127
128 (% style="text-align:center" %)
129 [[image:vltCZdX9aS.png]]
130
131 Input PLC IP
132
133 (% style="text-align:center" %)
134 [[image:dbIdTcQvgV.png]]
135
136 **PLC Settings**
137
138 Create the project according to the PLC specific model.
139
140 (% style="text-align:center" %)
141 [[image:1MEEEfQFsc.png]]
142
143 Enter the EtherNet/IP setting configuration window to check the PLC IP settings
144
145 (% style="text-align:center" %)
146 [[image:gBgYa8i91t.png]]
147
148 Double click the PLC unit icon on the main interface, then the settings would pop up on the right side.
149
150 (% style="text-align:center" %)
151 [[image:r94fglwJYN.png]]
152
153 (% class="box infomessage" %)
154 (((
155 ✎Note: PLC uses port 8500 to communicate with the PC, and uses port 8501 to communicate with the HMI.
156 )))
157
158 (% style="text-align:center" %)
159 [[image:KA0rBmR7tA.png]]
160
161
162 **How to export tags into HMI**
163
164 Double click Variable→ create tags
165
166 (% style="text-align:center" %)
167 [[image:7BdsGfYFZc.png]]
168
169 Export tags, and file format is "TXT".
170
171 (% style="text-align:center" %)
172 [[image:CJpE21DEOv.png]]
173
174 Connect with PLC through known IP address.
175
176 (% style="text-align:center" %)
177 [[image:SDXeswS5HB.png]]
178
179 Download the program into PLC
180
181 (% style="text-align:center" %)
182 [[image:KVSetup06.png]]
183
184 Select saved tags file
185
186 (% style="text-align:center" %)
187 [[image:2V6dzYLw1Z.png]]
188
189