Wiki source code of Omron

Version 47.1 by Jett on 2024/09/10 10:27

version	line-number	content
2.1	1	= {{id name="HOmron"/}}Omron =
	2
40.1	3	== CJ2M Series Ethemet ==
2.1	4
31.1	5	Supported device:CJ series, CJ1W-EIP21,CJ2M-EIP21
2.1	6
	7	HMI Settings
	8
31.1	9	\|=Items\|=Settings
	10	\|Protocol\|OMRON CJ TCP FINS Ethemet
	11	\|Connection\|Ethernet
	12	\|Port No.\|9600
	13	\|Device No.\|0
	14	\|HMI No.\|0
2.1	15
37.1	16	(% id="cke_bm_1048S" style="display:none" %)
32.1	17
37.1	18	Address List
32.1	19
2.1	20	\|=Type\|=Device registers\|=HMI registers\|=Format\|=Range\|=Note
35.1	21	\|(% colspan="1" rowspan="23" %)Bit\|CIO\|CIO\|CIO d\|0~~99999\|
	22	\|W\|W\|W d\|0~~99999\|
	23	\|D\|D\|D d\|0~~99999\|
	24	\|H\|H\|H d\|0~~99999\|
	25	\|A\|A\|A d\|0~~99999\|
	26	\|T\|T\|T h\|0~~99999\|
	27	\|CF\|CF\|CF d\|0~~99999\|
	28	\|FF\|FF\|FF d\|0~~99999\|
	29	\|C\|C\|C d\|0~~99999\|
	30	\|EM0\|EM0\|EM0 d\|0~~99999\|
	31	\|EM1\|EM1\|EM1 d\|0~~99999\|
	32	\|EM2\|EM2\|EM2 d\|0~~99999\|
	33	\|EM3\|EM3\|EM3 d\|0~~99999\|
	34	\|EM4\|EM4\|EM4 d\|0~~99999\|
	35	\|EM5\|EM5\|EM5 h\|0~~99999\|
	36	\|EM6\|EM6\|EM6 d\|0~~99999\|
	37	\|EM7\|EM7\|EM7 d\|0~~99999\|
	38	\|EM8\|EM8\|EM8 d\|0~~99999\|
	39	\|EM9\|EM9\|EM9 d\|0~~99999\|
	40	\|EMA\|EMA\|EMA d\|0~~99999\|
	41	\|EMB\|EMB\|EMB d\|0~~99999\|
	42	\|EMC\|EMC\|EMC d\|0~~99999\|
	43	\|Lamp\|Lamp\|Lamp d\|0~~0\|
	44	\|(% colspan="1" rowspan="24" %)Word\|CIO\|CIO\|CIO d\|0~~99999\|
	45	\|W\|W\|W d\|0~~99999\|
	46	\|D\|D\|D d\|0~~99999\|
	47	\|H\|H\|H d\|0~~99999\|
	48	\|A\|A\|A d\|0~~99999\|
	49	\|T\|T\|T h\|0~~99999\|
	50	\|CF\|CF\|CF d\|0~~99999\|
	51	\|FF\|FF\|FF d\|0~~99999\|
	52	\|C\|C\|C d\|0~~99999\|
	53	\|EM0\|EM0\|EM0 d\|0~~99999\|
	54	\|EM1\|EM1\|EM1 d\|0~~99999\|
	55	\|EM2\|EM2\|EM2 d\|0~~99999\|
	56	\|EM3\|EM3\|EM3 d\|0~~99999\|
	57	\|EM4\|EM4\|EM4 d\|0~~99999\|
	58	\|EM5\|EM5\|EM5 h\|0~~99999\|
	59	\|EM6\|EM6\|EM6 d\|0~~99999\|
	60	\|EM7\|EM7\|EM7 d\|0~~99999\|
	61	\|EM8\|EM8\|EM8 d\|0~~99999\|
	62	\|EM9\|EM9\|EM9 d\|0~~99999\|
	63	\|EMA\|EMA\|EMA d\|0~~99999\|
	64	\|EMB\|EMB\|EMB d\|0~~99999\|
	65	\|EMC\|EMC\|EMC d\|0~~99999\|
	66	\|IR\|IR\|IR d\|0~~99999\|
	67	\|DR\|DR\|DR d\|0~~99999\|
2.1	68
37.1	69	Configure the communication protocol
	70
	71	{{id name="Iimage-20220830143348-1.png"/}}
	72
	73	(% style="text-align:center" %)
	74	[[image:xwiki_PIStudio_12.PLC+protocols_WebHome_95df6576665b7885.png\|\|alt="image-20220830143348-1.png" height="735" width="616"]]
	75
	76	{{id name="Iimage-20220830143511-2.png"/}}
	77
	78	(% style="text-align:center" %)
	79	[[image:2.3.2.png]]
	80
	81	PLC Setting:
	82
	83	①[PLC]→[Change Communication Settings]→[Network Type] Ethernet→[setting…]→[Derive]→[IPaddress]set the IP address as PLC’s ,192.168.40.99→[Port Number]9600→[OK]→[OK]
	84	Note:The IP address of the PLC is displayed on the LED when the PLC is powered up
	85
	86	(% style="text-align:center" %)
	87	[[image:1.3.1.png]]
	88
	89	②[PLC]→[Work Online]→USB connection between PC and PLC→The connection prompt appears→[Yes]
	90
	91	(% style="text-align:center" %)
	92	[[image:1.3.2.png]]
	93
	94	③PLC default parameters: [IO Table and Unit Settings] → [Built-in Port/Inner Board] [1500] CJ2M-EIP21→[TCP/IP] → [Transfer [Unit to PC]] → Transfer successfully, click [Close]
	95
	96	[IP Address] Use the following address → [IP Address] 192.168.40.99, [Subnet Mask] 255.255.255.0.
	97	Note: Please configure the IP parameters of PLC according to the field needs
	98
	99	(% style="text-align:center" %)
	100	[[image:1.4.png]]
	101
	102	④Two rotary coding switches should be set depanding on the program paremeter:
	103	a) rotary coding switch for unit No. :For example, [Built-in Port/Inner Board] [1500] CJ2M-EIP21(Built In EtherNet/IP Port for CJ2M)(Unit: 0),the rotary coding switch should be dialed to 0
	104
	105	(% style="text-align:center" %)
	106	[[image:WeCom Screenshot_20230828090604.png]]
	107
	108
	109	b) rotary coding switch for node No. :The high byte 4 of the IP address should be the same as theone configured by the software. such as [IP address] 192.168.40.99. The IP address high byte 4 is 99,rotary coding switch is to use hexadecimal 63 corresponds to decimal 99, node number dialling code 161 corresponds to: 6, 160 corresponds to: 3.
	110
	111
	112	(% style="text-align:center" %)
	113	[[image:WeCom.png]]
	114
2.1	115	Cable Wiring
	116
	117	Pin Definition Diagram
	118
31.1	119	{{id name="Ihttps:2F2Fdocs.we-con.com.cn2Fbin2Fdownload2FPIStudio2F12.PLC2520protocols2FWebHome2F12.PLC2520Protocol_html_2297240b57346b2a.png3Fwidth3D40126height3D17026rev3D1.1-3"/}}
2.1	120
31.1	121	(% style="text-align:center" %)
	122	[[image:https://docs.we-con.com.cn/bin/download/PIStudio/12.PLC%20protocols/WebHome/12.PLC%20Protocol_html_2297240b57346b2a.png?width=401&height=170&rev=1.1\|\|alt="12.PLC Protocol_html_2297240b57346b2a.png" height="170" width="401"]]
	123
41.1	124	== {{id name="HCS128CP1E2FCP1H29"/}}CP1E Series Serial ==
2.1	125
	126	Supported device: OMRON CS1(CP1E/CP1H)
	127
	128	HMI Settings
	129
	130	\|=Items\|=Settings\|=Note
	131	\|Protocol\|OMRON CS1(CP1E/CP1H)\|
	132	\|Connection\|RS232 (9600, 2, 7, EVEN)\|
	133	\|Port No.\|None\|
	134	\|PLC station No.\|0\|
	135
	136	Address List
	137
	138	\|=Type\|=Device registers\|=HMI registers\|=Format\|=Range\|=Note
36.1	139	\|(% colspan="1" rowspan="22" %)Bit\|CIO\|CIO\|CIO d\|0~~99999\|
	140	\|W\|W\|W d\|0~~99999\|
	141	\|D\|D\|D d\|0~~99999\|
	142	\|H\|H\|H d\|0~~99999\|
	143	\|A\|A\|A d\|0~~99999\|
	144	\|TF\|T\|T h\|0~~99999\|
	145	\|CF\|CF\|CF d\|0~~99999\|
	146	\|T\|FF\|FF d\|0~~99999\|
	147	\|C\|C\|C d\|0~~99999\|
	148	\|EM0\|EM0\|EM0 d\|0~~99999\|
	149	\|EM1\|EM1\|EM1 d\|0~~99999\|
	150	\|EM2\|EM2\|EM2 d\|0~~99999\|
	151	\|EM3\|EM3\|EM3 d\|0~~99999\|
	152	\|EM4\|EM4\|EM4 d\|0~~99999\|
	153	\|EM5\|EM5\|EM5 h\|0~~99999\|
	154	\|EM6\|EM6\|EM6 d\|0~~99999\|
	155	\|EM7\|EM7\|EM7 d\|0~~99999\|
	156	\|EM8\|EM8\|EM8 d\|0~~99999\|
	157	\|EM9\|EM9\|EM9 d\|0~~99999\|
	158	\|EMA\|EMA\|EMA d\|0~~99999\|
	159	\|EMB\|EMB\|EMB d\|0~~99999\|
	160	\|EMC\|EMC\|EMC d\|0~~99999\|
	161	\|(% colspan="1" rowspan="23" %)Word\|CIO\|CIO\|CIO d\|0~~99999\|
	162	\|W\|W\|W d\|0~~99999\|
	163	\|D\|D\|D d\|0~~99999\|
	164	\|H\|H\|H d\|0~~99999\|
	165	\|A\|A\|A d\|0~~99999\|
	166	\|T\|T\|T h\|0~~99999\|
	167	\|CIO\|CF\|CF d\|0~~99999\|
	168	\|C\|C\|C d\|0~~99999\|
	169	\|EM0\|EM0\|EM0 d\|0~~99999\|
	170	\|EM1\|EM1\|EM1 d\|0~~99999\|
	171	\|EM2\|EM2\|EM2 d\|0~~99999\|
	172	\|EM3\|EM3\|EM3 d\|0~~99999\|
	173	\|EM4\|EM4\|EM4 d\|0~~99999\|
	174	\|EM5\|EM5\|EM5 h\|0~~99999\|
	175	\|EM6\|EM6\|EM6 d\|0~~99999\|
	176	\|EM7\|EM7\|EM7 d\|0~~99999\|
	177	\|EM8\|EM8\|EM8 d\|0~~99999\|
	178	\|EM9\|EM9\|EM9 d\|0~~99999\|
	179	\|EMA\|EMA\|EMA d\|0~~99999\|
	180	\|EMB\|EMB\|EMB d\|0~~99999\|
	181	\|EMC\|EMC\|EMC d\|0~~99999\|
	182	\|IR\|IR\|IR d\|0~~99999\|
	183	\|DR\|DR\|DR d\|0~~99999\|
2.1	184
	185	Configure the communication protocol
	186
	187	{{id name="Iimage-20220902153118-1.png"/}}[[image:xwiki_PIStudio_12.PLC+protocols_WebHome_4acef6476c6f9de3.png\|\|alt="image-20220902153118-1.png" height="735" width="616"]]
	188
	189	{{id name="Iimage-20220902151322-2.png"/}}[[image:xwiki_PIStudio_12.PLC+protocols_WebHome_4f9620139b8a44b3.png\|\|alt="image-20220902151322-2.png" height="905" width="1038"]]
	190
31.1	191	{{id name="cke_bm_27437S"/}} PLC Settings(CX-Programmer)
2.1	192
	193	Open cx-programmer, create a new PLC project or open the project that has been created.
	194	Create new project： [File]→[New]→[Device Type]CP1E→[settings]→[General]→[CPU Type]N30→[OK]→[OK].
	195
	196	{{id name="I1.25DE57A0B65B05EFAD.png"/}}[[image:xwiki_PIStudio_12.PLC+protocols_WebHome_aa70463d933c7549.png\|\|alt="1.2 工程新建D.png" height="660" width="1134"]]
	197
	198	PLC Default Parameters:[Settings]→[Built-in RS232C Port]→[Communication Settings]→[Standard]9600,1,7,2,E means:[Baud rate] 9600, [Data bits]7, [Stop bits] 2,[Parity] EVEN→[Unit Number]0 →[Mode]Host Link(Defaut).
	199
	200	{{id name="I1.34E3253E353C26570768467E5770B-914D7F6ED.png"/}}[[image:xwiki_PIStudio_12.PLC+protocols_WebHome_84484fbbb00ca61.png\|\|alt="1.3 串口参数的查看-配置D.png" height="660" width="1134"]]
	201
	202	Cable Wiring
	203
	204	{{id name="I56FE72473.png"/}}[[image:xwiki_PIStudio_12.PLC+protocols_WebHome_4c5480a409965d39.png\|\|alt="image-20220902153949-2.png" height="508" width="2014"]]
	205
	206	Pin Definition Diagram
	207
	208	{{id name="I3.1.263A553E3.png"/}}[[image:xwiki_PIStudio_12.PLC+protocols_WebHome_ad6138e6812c2253.png\|\|alt="image-20220902154056-3.png" height="235" width="332"]]
	209
	210	== {{id name="HEC55Protocol"/}}EC55 Protocol ==
	211
	212	Supported device: EC55 temperature instrument
	213
	214	1）HMI Settings
	215
	216	\|Items\|Settings\|Note
	217	\|Protocol\|Omron EC55\|
	218	\|Connection\|RS485 (9600, 2, 7, EVEN)\|
	219	\|Port No.\|None\|
	220	\|PLC station No.\|0\|
	221
	222	2）Address List
	223
	224	\|Type\|Register\|Device range\|HMI range\|Function
	225	\|(% rowspan="3" %)Double word\|C0\|0-13 (Hex)\|0-19\|Set read only parameter for area 0
	226	\|C1\|0-4D(Hex)\|0-77\|Set Read/Write parameter for area 0
	227	\|C3\|0-CD(Hex)\|0-205\|Set Read/Write parameter for area 1
	228	\|(% rowspan="6" %)Word\|80\|0-13(Hex)\|0-19\|Set read only parameter in area 0
	229	\|81\|0-4D(Hex)\|0-77\|Set Read/Write parameter in area 0
	230	\|83\|0-CD(Hex)\|0-205\|Set Read/Write parameter in area 1
	231	\|CP\|-\|0-6\|Read controller intrinsic property
	232	\|CS\|-\|0-2\|Read controller states
	233	\|CA\|-\|0-17\|Action command
	234
	235	3）Device Settings
	236
	237	Omron E5CC PLC configuration
	238
	239	After entering the Communication Settings menu, please set the parameters to the default values for the following table. Press the cycle key of the instrument to enter the next setting.
	240
	241	{{id name="I12.PLCProtocol_html_3d95e093792ba98a.png"/}}[[image:xwiki_PIStudio_12.PLC+protocols_WebHome_ca4d99a0d2ffe097.png\|\|alt="12.PLC Protocol_html_3d95e093792ba98a.png" height="229" width="550"]]
	242
	243	According to PLC configuration and communication port configuration information of the HMI, provide the corresponding steps and configuration screenshots. This configuration needs to communicate properly with the above PLC configuration. The project settings are as follows
	244
	245	{{id name="I12.PLCProtocol_html_be583aa69dd6cf4c.png"/}}[[image:xwiki_PIStudio_12.PLC+protocols_WebHome_984474debc119fab.png\|\|alt="12.PLC Protocol_html_be583aa69dd6cf4c.png" height="242" width="550"]]
	246
	247	✎Note: The communication settings for HMI should be consistent with this setting.
	248
	249	Cable Wiring
	250
	251	{{id name="I12.PLCProtocol_html_5e9a81a14106da9e.png"/}}[[image:xwiki_PIStudio_12.PLC+protocols_WebHome_7b2556c42d43a768.png\|\|alt="12.PLC Protocol_html_5e9a81a14106da9e.png" height="223" width="392"]]
	252
	253	{{id name="I12.PLCProtocol_html_1897d92be6948d58.png-1"/}}[[image:xwiki_PIStudio_12.PLC+protocols_WebHome_c6d16b5adff76549.png\|\|alt="12.PLC Protocol_html_1897d92be6948d58.png" height="223" width="393"]]
	254
	255	✎Note:
	256
	257	* COM3 only available in PI8000/PI9000 series.
	258	* CA address could not support continuous writing function；
	259	* Because of CP address intrinsic property: read control intrinsic property, so please place the character input part in use. Set address with CP0 and character length 10, used to display controller type. And place a number input part, set address with CP5 (cache size). Do not place other CP type address without CP0 in screen, otherwise CP type address is invalid
	260	* When set value into read & write address, it is necessary to switch the temperature instrument meter to the corresponding interface according to the menu of the instrument where the address locates, so that the value could be written, otherwise, the value could not be written; When the communication write setting of the instrument is turned off, the writing function is invalid. Writing function could be opened by using the 00 address of the CA register, which write 01 value.
	261	* When continuous writing of a value to a read-write address, please make sure all continuous writing address could be written. Otherwise, if one of these addresses could not be written, then all continuous writing commands will fail.
	262	* Because of the mechanism problem, this protocol could not support CompoWay/F function that is read-write function of variables in protocol document.
	263	* When using double-word address, set the data format to 32 bits, otherwise the read/write function is unable.
	264	* Please set the communication delay time of 10ms in setting, to avoid that the instrument may not be able to communicate in a short time due to too fast data access and too much connection requests.
	265	* {{id name="I12.PLCProtocol_html_d428cad280fdefb3.png"/}}[[image:xwiki_PIStudio_12.PLC+protocols_WebHome_f434f58797d3c0da.png\|\|alt="12.PLC Protocol_html_d428cad280fdefb3.png" height="276" width="347"]] Because of the particularity of the instrument, it is necessary to write the value of the address in the menu interface corresponding to the address, and to enter the menu where the address locates, so that the value could be written.
	266
46.1	267	== {{id name="HNXEtherNet2FIP"/}}Ethernet/IP (NX/NJ Serirs) ==
2.1	268
	269	Supported series: Omron NX/NJ series
	270
	271	HMI Setting
	272
	273	\|Items\|Settings\|Note
	274	\|Protocol\|Omron NX Ethernet/IP\|
	275	\|Connection\|Ethernet\|
	276	\|Port No.\|44818\|
	277	\|PLC station No.\|1\|
	278
46.1	279	Address list
	280
	281	\|Data type\|Data format in PIStudio\|Memo
	282	\|BOOL\|bit\|
	283	\|Byte\|16-bit BCD,HEX,Binary,Unsigned\|8-bit
	284	\|SInt\|16-bit BCD,HEX,Binary,Signed\|8-bit
	285	\|USInt\|16-bit BCD,HEX,Binary,Unsigned\|8-bit
	286	\|Word\|16-bit BCD,HEX,Binary,Unsigned\|16-bit
	287	\|Int\|16-bit BCD,HEX,Binary,Signed\|16-bit
	288	\|UInt\|16-bit BCD,HEX,Binary,Unsigned\|16-bit
	289	\|DWord\|32-bit BCD, Hex, Binary, Unsigned\|32-bit
	290	\|DInt\|32-bit BCD, Hex, Binary, Signed\|32-bit
	291	\|Real\|32-bit Float\|32-bit
	292	\|UDInt\|32-bit BCD, Hex, Binary, Unsigned\|32-bit
	293	\|LInt\|64-bit Signed\|64-bit
	294	\|ULInt\|64-bit USigned\|64-bit
	295	\|LWord\|64-bit USigned\|64-bit
47.1	296	\|LReal\|64-bit Float\|64-bit
46.1	297
2.1	298	Instruction
	299
	300	1) In Sysmac Studio, please select [Publish Only] for [Network Publish] when setting address tag.
	301
	302	2) When [Do not publish] is selected for a tag, different import methods may lead to different results. When import tags by [Get Tags from Device], the tag will be eliminated. If [Import tags] is selected, the tags will be imported, but the communication will not succeed.
	303
45.1	304	(% style="text-align:center" %)
	305	[[image:1725933697098-418.png]]
2.1	306
	307	Export labels from Sysmac Studio
	308
	309	Launch Sysmac Studio, under Global Variables create the address labels, and thenselect [Tools] -> [Export Global Variables];
	310
45.1	311	(% style="text-align:center" %)
	312	[[image:1725933727638-698.png]]
2.1	313
45.1	314	[[image:1725933619328-454.png]]
2.1	315
45.1	316	Create a .CSV file,and Paste the [CX-Designer] into it.
2.1	317
45.1	318	(% style="text-align:center" %)
	319	[[image:1725933782144-300.png]]
2.1	320
45.1	321	Launch PIStudio, in [Communication] Settings add [Omron Ethernet/IP (NX/NJ Serirs)] protocol;
2.1	322
45.1	323	[[image:1725933826453-416.png]]
2.1	324
45.1	325	Click [Label manage];Click [Import Tags form file] and then Choose the .CSV file you need;
2.1	326
45.1	327	(% style="text-align:center" %)
	328	[[image:1725933926323-707.png]]
2.1	329
45.1	330
2.1	331	Communication Settings
	332
45.1	333	Set PLC IP in [Device IP] settings;
2.1	334
45.1	335	(% style="text-align:center" %)
	336	[[image:1725934163105-489.png\|\|height="99" width="241"]]
2.1	337
	338
45.1	339	(% style="text-align:center" %)
	340	[[image:1725934131262-239.png]]
2.1	341
	342	Cable Wiring
	343
	344	{{id name="Ihttps:2F2Fdocs.we-con.com.cn2Fbin2Fdownload2FPIStudio2F12.PLC2520protocols2FWebHome2F12.PLC2520Protocol_html_2297240b57346b2a.png3Fwidth3D40126height3D17026rev3D1.1-4"/}}[[image:https://docs.we-con.com.cn/bin/download/PIStudio/12.PLC%20protocols/WebHome/12.PLC%20Protocol_html_2297240b57346b2a.png?width=401&height=170&rev=1.1\|\|alt="12.PLC Protocol_html_2297240b57346b2a.png" height="170" width="401"]]
	345
39.1	346	== {{id name="HCV2FCJ1M2FCS1H"/}}CJ2M Series Serial ==
2.1	347
	348	HMI Setting:
	349
	350	\|=Parameters\|=Recommended
	351	\|=PLC type\|OMRON CV/CJ1M/CS1H
	352	\|=PLC I/F\|RS232/RS485
	353	\|=Baud rate\|9600
	354	\|=Data bits\|7
	355	\|=Parity\|Even
	356	\|=Stop bits\|2
	357	\|=PLC sta. no.\|0
	358
	359	PLC Setting:
	360
	361	Open cx-programmer, create a new PLC project or open the project that has been created.
	362	Create new project： [File]→[New]→[Device Type]CJ2M→[settings]→[General]→[CPU Type]CPU31→[OK]→[OK].
	363
	364	{{id name="I1.265B05EFA5DE57A0B.png"/}}[[image:xwiki_PIStudio_12.PLC+protocols_WebHome_1edc9bf9e8c98170.png\|\|alt="1.2 新建工程.png" height="660" width="1134"]]
	365
	366	PLC Default Parameters:[Settings]→[Serial Port]→[Communication Settings]→[Standard]9600,1,7,2,E means:[Baud rate] 9600, [Data bits]7, [Stop bits] 2,[Parity] EVEN→[Unit Number]0 →[Mode]Host Link.
	367	Note:The serial port parameters should be set depending on field requirements
	368
	369	{{id name="I1.34E3253E353C26570914D7F6E.png"/}}[[image:xwiki_PIStudio_12.PLC+protocols_WebHome_d4a08b7e4dfac0bd.png\|\|alt="1.3串口参数配置.png" height="660" width="1134"]]
	370
	371	Device Address:
	372
	373	\|=Bit/Word\|=Device type\|=Format\|=Range\|=Memo
	374	\|=B\|CIO\|DDDDDdd\|0 ~~65535.15\|I/O and Internal Relay
	375	\|=B\|W\|DDDDDdd\|0 ~~65535.15\|Hold Relay
	376	\|=B\|D\|DDDDDdd\|0 ~~65535.15\|Link Relay
	377	\|=B\|H\|DDDDDdd\|0 ~~65535.15\|
	378	\|=B\|A\|DDDDDdd\|0 ~~65535.15\|
	379	\|=B\|TF\|DDDDD\|0 ~~ 99999\|
	380	\|=B\|CF\|DDDDD\|0 ~~ 99999\|Auxiliary Relay
	381	\|=B\|T\|DDDDDdd\|0 ~~65535.15\|
	382	\|=B\|C\|DDDDDdd\|0 ~~65535.15\|
	383	\|=B\|EM0\|DDDDDdd\|0 ~~ 99999.15\|
	384	\|=B\|EM1\|DDDDDdd\|0 ~~ 99999.15\|
	385	\|=B\|EM2\|DDDDDdd\|0 ~~ 99999.15\|
	386	\|=B\|EM3\|DDDDDdd\|0 ~~ 99999.15\|
	387	\|=B\|EM4\|DDDDDdd\|0 ~~ 99999.15\|
	388	\|=B\|EM5\|DDDDDdd\|0 ~~ 99999.15\|
	389	\|=B\|EM6\|DDDDDdd\|0 ~~ 99999.15\|
	390	\|=B\|EM7\|DDDDDdd\|0 ~~ 99999.15\|
	391	\|=B\|EM8\|DDDDDdd\|0 ~~ 99999.15\|
	392	\|=B\|EM9\|DDDDDdd\|0 ~~ 99999.15\|
	393	\|=B\|EMA\|DDDDDdd\|0 ~~ 99999.15\|
	394	\|=B\|EMB\|DDDDDdd\|0 ~~ 99999.15\|
	395	\|=B\|EMC\|DDDDDdd\|0 ~~ 99999.15\|
	396	\|=B\|Lamp\|D\|0~~0\|
	397
	398	\|=Bit/Word\|=Device type\|=Format\|=Range
	399	\|=W\|W\|DDDDD\|0 ~~ 99999
	400	\|=W\|D\|DDDDD\|0 ~~ 99999
	401	\|=W\|H\|DDDDD\|0 ~~ 99999
	402	\|=W\|A\|DDDDD\|0 ~~ 99999
	403	\|=W\|T\|DDDDD\|0 ~~ 99999
	404	\|=W\|C\|DDDDD\|0 ~~ 99999
	405	\|=W\|CIO\|DDDDD\|0 ~~ 99999
	406	\|=W\|EM0\|DDDDD\|0 ~~ 99999
	407	\|=W\|EM1\|DDDDD\|0 ~~ 99999
	408	\|=W\|EM2\|DDDDD\|0 ~~ 99999
	409	\|=W\|EM3\|DDDDD\|0 ~~ 99999
	410	\|=W\|EM4\|DDDDD\|0 ~~ 99999
	411	\|=W\|EM5\|DDDDD\|0 ~~ 99999
	412	\|=W\|EM6\|DDDDD\|0 ~~ 99999
	413	\|=W\|EM7\|DDDDD\|0 ~~ 99999
	414	\|=W\|EM8\|DDDDD\|0 ~~ 99999
	415	\|=W\|EM9\|DDDDD\|0 ~~ 99999
	416	\|=W\|EMA\|DDDDD\|0 ~~ 99999
	417	\|=W\|EMB\|DDDDD\|0 ~~ 99999
	418	\|=W\|EMC\|DDDDD\|0 ~~ 99999
	419	\|=W\|IR\|DDDDD\|0 ~~ 99999
	420	\|=W\|DR\|DDDDD\|0 ~~ 99999
	421
	422	Wiring Diagram:
	423
	424	RS-485
	425
	426	{{id name="I3.1.png"/}}[[image:xwiki_PIStudio_12.PLC+protocols_WebHome_a94192ee427e053b.png\|\|alt="3.1.png" height="186" width="546"]]
	427
	428	Pin Definition Diagram
	429
	430	{{id name="I3.2.png"/}}[[image:xwiki_PIStudio_12.PLC+protocols_WebHome_4da7b3277467c9a6.png\|\|alt="3.2.png" height="408" width="593"]]
	431
	432	RS-232
	433
	434	CPU Port (CPM2A,CQM1/1H,C200H/HS/ALPHA series)
	435
	436	Communication Module:
	437
	438	CPM1-CIF01 adapter (for CPM1/CPM1A/CPM2A series, CQM1/CQM1H series) CPM1H-SCB41 communication module (for CQM1H-CPU51/61)
	439
	440	The serial port pin assignments may vary between HMI models, please click the following link for more information.
	441
	442	{{id name="Iimage-20220914115848-1.jpeg"/}}[[image:xwiki_PIStudio_12.PLC+protocols_WebHome_138658736ae39b8.jpg\|\|alt="image-20220914115848-1.jpeg" height="499" width="610"]]
	443
43.1	444	== C200HE Series Serial ==
2.1	445
	446	Supported series: Omron C200HE series
	447
	448	HMI Settings(recommended)
	449
	450	\|=Item\|=Recommended
	451	\|=Protocol\|OMRON HOSTLINK
	452	\|=Connection\|RS232
	453	\|=Baud rate\|9600
	454	\|=Stop bits\|2
	455	\|=Data bits\|7
	456	\|=Parity\|EVEN
	457	\|=PLC Station No.\|0
	458	\|=HMI Station No.\|0
	459
	460	Address List
	461
	462	\|=Type\|=Device registers\|=HMI registers\|=Format\|=Range
	463	\|Bit\|IR\|IR\|IR d\|0~~99999
	464	\|Bit\|LR\|LR\|LR d\|0~~99999
	465	\|Bit\|HR\|HR\|HR d\|0~~99999
	466	\|Bit\|AR\|AR\|AR d\|0~~99999
	467	\|Bit\|TIMB\|TIMB\|TIMB d\|0~~99999
	468	\|Bit\|CNTB\|CNTB\|CNTB d\|0~~99999
	469	\|Bit\|TIM\|TIM\|TIM d\|0~~99999
	470	\|Bit\|DM\|DM\|DM d\|0~~99999
	471	\|Bit\|CNT\|CNT\|CNT d\|0~~99999
	472	\|Bit\|WR\|WR\|WR d\|0~~99999
	473	\|Bit\|LAMP\|LAMP\|LAMP d\|0~~0
	474	\|Word\|IR\|IR\|IR d\|0~~99999
	475	\|Word\|LR\|LR\|LR d\|0~~99999
	476	\|Word\|HR\|HR\|HR d\|0~~99999
	477	\|Word\|AR\|AR\|AR d\|0~~99999
	478	\|Word\|TIM\|TIM\|TIM d\|0~~99999
	479	\|Word\|DM\|DM\|DM d\|0~~99999
	480	\|Word\|CNT\|CNT\|CNT d\|0~~99999
	481	\|Word\|WR\|WR\|WR d\|0~~99999
	482
	483	Cable Wiring
	484
	485	{{id name="I3.1.263A553E3.png-1"/}}[[image:xwiki_PIStudio_12.PLC+protocols_WebHome_ad6138e6812c2253.png\|\|alt="3.1.2 接口.png" height="240" width="339"]]

Wiki source code of Omron

Navigation

Table of Contents