Skip to Content

Changes for page Rockwell

Last modified by Molly on 2024/11/04 18:13
From version 4.1
edited by Hunter
on 2023/08/24 18:12
Change comment: There is no comment for this version
To version 1.1
edited by Hunter
on 2023/08/24 18:12
Change comment: Changed document syntax from [XWiki 2.1] to [xwiki/2.1].

Summary

Details

Page properties
Title
... ... @@ -1,1 +1,0 @@
1 -Rockwell
Content
... ... @@ -1,249 +1,0 @@
1 -= {{id name="HRockwell"/}}**Rockwell** =
2 -
3 -== {{id name="HDF1"/}}**DF1** ==
4 -
5 -MicroLogix 1000/1100/1200/1400/1500; SLC 5/03 5/04 5/05; PLC-5
6 -
7 -**HMI Settings**
8 -
9 -|=Item|=Recommended |=Note
10 -|=Protocol|Rockwell DF1|
11 -|=Connection|RS232|
12 -|=Baud rate|19200|
13 -|=Stop bits|1|
14 -|=Data bits|8|
15 -|=Parity|None|
16 -|=PLC Station No.|1|
17 -|=HMI Station No.|0|
18 -
19 -**PLC Settings**
20 -
21 -DF1 Full Duplex protocol and CRC error check
22 -
23 -**Address List**
24 -
25 -|=**Type**|=**Device registers**|=**Format**|=**Range**|=Note
26 -|(% rowspan="5" %)Bit|I|I ddd.dd|0.0~~255.15|Only able to communicate with file number I1
27 -|O|O ddd.dd|0.0~~255.15|Only able to communicate with file number O0
28 -|B|B nnhh.dd|0.0~~ffff.15|Only able to communicate with file number B3
29 -|S|S ddd.dd|0.0~~255.15|Only able to communicate with file number S2
30 -|N|N nnhh.dd|0.0~~ffff.15|Only able to communicate with file number N7
31 -|(% rowspan="6" %)Word|S|S ddd|0~~255|Only able to communicate with file number S2
32 -|TS|TS nnhh|0~~ffff|Only able to communicate with file number T4 (Timer Preset Value)
33 -|TP|TP nnhh|0~~ffff|Only able to communicate with file number T4 (Timer Accumulator Value)
34 -|CS|CS nnhh|0~~ffff|Only able to communicate with file number C5 (Counter Preset Value)
35 -|CP|CP nnhh|0~~ffff|Only able to communicate with file number C5 (Counter Accumulator Value)
36 -|N|N nnhh|0~~ffff|Only able to communicate with file number N7
37 -
38 -**Cable Wiring**
39 -
40 -{{id name="IAB.gif"/}}[[image:xwiki_PIStudio_12.PLC+protocols_WebHome_c884ca361be80135.gif||alt="AB.gif" height="247" width="400"]]
41 -
42 -== {{id name="HDF1Advanced"/}}**DF1 Advanced** ==
43 -
44 -MicroLogix 1000/1100/1200/1400/1500; SLC 5/03 5/04 5/05; PLC-5
45 -
46 -**HMI Settings**
47 -
48 -|=Item|=Recommended |=Note
49 -|=Protocol|Rockwell DF1 Advanced|
50 -|=Connection|RS232|
51 -|=Baud rate|19200|
52 -|=Stop bits|1|
53 -|=Data bits|8|
54 -|=Parity|None|
55 -|=PLC Station No.|1|
56 -|=HMI Station No.|0|
57 -
58 -**PLC Settings**
59 -
60 -DF1 Full Duplex protocol and CRC error check
61 -
62 -**Address List**
63 -
64 -|=**Type**|=**Device registers**|=**Format**|=**Range**|=Note
65 -|(% rowspan="7" %)Bit|I1|I1ddd.dd|0.0~~255.15|Only able to communicate with file number I1
66 -|O0|O0ddd.dd|0.0~~255.15|Only able to communicate with file number O0
67 -|S2|S2ddd.dd|0.0~~255.15|Only able to communicate with file number S2
68 -|B3|B3ddd.dd|0.0~~255.15|Only able to communicate with file number B3
69 -|BN|BNddddd.dd|0.0~~99255.15|(((
70 -Bit data file B0~~B99
71 -
72 -First two digits is for file number
73 -
74 -For example, BN13001.00 represents file number B13, address 001, the 0th bit.
75 -)))
76 -|N7|N7ddd.dd|0.0~~255.15|Only able to communicate with file number N7
77 -|NN|NNddddd.dd|0.0~~99255.15|(((
78 -Integer data file bit format N0~~N99
79 -
80 -First two digits is for file number
81 -
82 -For example, NN13001.00 represents file number N13, address 001, the 0th bit.
83 -)))
84 -|(% rowspan="11" %)Word|S2|S2ddd|0~~255|Only able to communicate with file number S2
85 -|T4S|T4Sddd|0~~255|Only able to communicate with file number T4 (Timer Preset Value)
86 -|T4P|T4Pddd|0~~255|Only able to communicate with file number T4 (Timer Accumulator Value)
87 -|TNS|TNSddddd|0~~99255|(((
88 -Timer Preset Value
89 -
90 -First two digits is for file number
91 -
92 -For example, TNS99255 represents file number T99, address 255.
93 -)))
94 -|TNP|TNPddddd|0~~99255|(((
95 -Timer Accumulator Value
96 -
97 -First two digits is for file number
98 -
99 -For example, TNP99255 represents file number T99, address 255.
100 -)))
101 -|C5S|C5Sddd|0~~255|Only able to communicate with file number C5 (Counter Preset Value)
102 -|C5P|C5Pddd|0~~255|Only able to communicate with file number C5 (Counter Accumulator Value)
103 -|CNS|CNSddddd|0~~99255|(((
104 -Counter Preset Value
105 -
106 -First two digits is for file number
107 -
108 -For example, CNS99255 represents file number C99, address 255.
109 -)))
110 -|CNP|CNPddddd|0~~99255|(((
111 -Counter Accumulator Value
112 -
113 -First two digits is for file number
114 -
115 -For example, CNP99255 represents file number C99, address 255.
116 -)))
117 -|N7|N7ddd|0~~255|Only able to communicate with file number N7
118 -|NN|NNddd|0~~99255|(((
119 -Integer data file
120 -
121 -First two digits is for file number
122 -
123 -For example, NN99255 represents file number N99, address 255.
124 -)))
125 -|(% rowspan="3" %)Double Word|F8|F8ddd|0~~255|Only able to communicate with file number F8
126 -|FN|FNddddd|0~~99255|(((
127 -Floating point data file
128 -
129 -First two digits is for file number
130 -
131 -For example, FN99255 represents file number F99, address 255.
132 -)))
133 -|LN|LNddddd|0~~99255|Long
134 -
135 -**Cable Wiring**
136 -
137 -{{id name="IAB.gif-1"/}}[[image:xwiki_PIStudio_12.PLC+protocols_WebHome_c884ca361be80135.gif||alt="AB.gif" height="247" width="400"]]
138 -
139 -== {{id name="HMicroLogix"/}}**MicroLogix** ==
140 -
141 -MicroLogix 1000/1100/1200/1400/1500; SLC 5/03 5/04 5/05 PLC-5
142 -
143 -**HMI Settings**
144 -
145 -|**Item**|**Settings**|**Note**
146 -|Protocol|Allen-Bradlley MicroLogix|
147 -|Connection|RS232|
148 -|Baud rate|19200|
149 -|Data bit|8|
150 -|Parity|None|
151 -|Stop bit|1|
152 -|PLC station No.|1|
153 -
154 -**Address List**
155 -
156 -|**Type**|**Device registers**|**Format**|**Range**|**Note**
157 -|(% rowspan="5" %)Bit|I|I d.d|0.0~~255.15|
158 -|O|O d.d|0.0~~255.15|
159 -|B|B nnhh.dd|0.0~~ffff.15|nn: block number (hex)
160 -|S|S d.d|0.0~~255.15|
161 -|N|N nnhh.dd|0.0~~ffff.15|nn: block number (hex)
162 -|(% rowspan="9" %)Word|S|S d|0~~255|
163 -|TS|TS nnhh|0~~ffff|(% rowspan="8" %)nn: block number (hex)
164 -|TP|TP nnhh|0~~ffff
165 -|CS|CS nnhh|0~~ffff
166 -|CP|CP nnhh|0~~ffff
167 -|N|N nnhh|0~~ffff
168 -|C|C nnhh|0~~ffff
169 -|T|T nnhh|0~~ffff
170 -|R|R nnhh|0~~ffff
171 -
172 -**Cable Wiring**
173 -
174 -{{id name="I12.PLCProtocol_html_58205bdf82c06d4.png"/}}[[image:xwiki_PIStudio_12.PLC+protocols_WebHome_32d8ab10ec374ea6.png||alt="12.PLC Protocol_html_58205bdf82c06d4.png" height="307" width="500"]]
175 -
176 -== {{id name="HEtherNet2FIP28CompactLogixSeries29"/}}**EtherNet/IP(CompactLogix Series)** ==
177 -
178 -Allen-Brandly Compact Logix Free Tag
179 -
180 -**HMI Settings**
181 -
182 -|**Items**|**Settings**|**Note**
183 -|Protocol|EtherNet/IP(CompactLogix Series)|
184 -|Connection|Ethernet|
185 -|Port No.|44818|
186 -
187 -**PLC Setting**
188 -
189 -Create new tags
190 -
191 -{{id name="I12.PLCProtocol_html_a748a27dcf7f1124.png"/}}[[image:xwiki_PIStudio_12.PLC+protocols_WebHome_75d3f4097ac67d8e.png||alt="12.PLC Protocol_html_a748a27dcf7f1124.png" height="411" width="700"]]
192 -
193 -Export tags to CSV file. ([Tools] » [Export] » [Tags and Logic Comments])
194 -
195 -{{id name="I12.PLCProtocol_html_151379170bb8ff3e.png"/}}[[image:xwiki_PIStudio_12.PLC+protocols_WebHome_39bb299de26a0af0.png||alt="12.PLC Protocol_html_151379170bb8ff3e.png" height="352" width="700"]]
196 -
197 -Import labels, please open [Communication] window and click [Import label];
198 -
199 -Select csv file, all tags will be displayed as belows;
200 -
201 -{{id name="I12.PLCProtocol_html_af192e54dee96f38.png"/}}[[image:xwiki_PIStudio_12.PLC+protocols_WebHome_4216defdc24cba39.png||alt="12.PLC Protocol_html_af192e54dee96f38.png" height="586" width="700"]]
202 -
203 -**✎Note:**
204 -
205 -Because in different region, the separation symbol is different, we suggest you check this before you want to import your tags. To open csv file as text format.
206 -
207 -{{id name="I12.PLCProtocol_html_33df1d63ebe53726.png"/}}[[image:xwiki_PIStudio_12.PLC+protocols_WebHome_24f4d658173f88a9.png||alt="12.PLC Protocol_html_33df1d63ebe53726.png" height="206" width="700"]]
208 -
209 -The directory of changing system settings: [Control Panel] -> [Date, Time, Language,and Regional Options] -> [Change the format of numbers, dates, and times]->[Customize]-> [List separator]. Please select [,] and export CSV file after setting.
210 -
211 -**Communication settings in HMI**
212 -
213 -Enable HMI Ethernet in [Project Settings];
214 -
215 -{{id name="I12.PLCProtocol_html_43b671f18153910d.png-5"/}}[[image:xwiki_PIStudio_12.PLC+protocols_WebHome_a98ee09dac36eba3.png||alt="12.PLC Protocol_html_43b671f18153910d.png" height="106" width="400"]]
216 -
217 -Set PLC IP in [Device IP] settings;
218 -
219 -{{id name="I12.PLCProtocol_html_27870d373581892e.png"/}}[[image:xwiki_PIStudio_12.PLC+protocols_WebHome_10385ddd81c8baff.png||alt="12.PLC Protocol_html_27870d373581892e.png" height="206" width="600"]]
220 -
221 -**Cable Wiring**
222 -
223 -{{id name="I12.PLCProtocol_html_2297240b57346b2a.png-3"/}}[[image:xwiki_PIStudio_12.PLC+protocols_WebHome_ac8ece9a26719fda.png||alt="12.PLC Protocol_html_2297240b57346b2a.png" height="170" width="400"]]
224 -
225 -== {{id name="HMicroLogix1200"/}}**MicroLogix 1200** ==
226 -
227 -The operational address is determined by the connection of Allen-Bradley PLC to HMI. For extension modules or other special conditions, refer to allen-Bradley PLC instruction manual. The following is an example of allen-bradley MicroLogix1200.
228 -
229 -* **Bit address I:** The address ranges from 0.0 to 255.15. The value of the data before the decimal point ranges from 0 to 255 (decimal). The value from 0 to 15 after the decimal point is the sub address (decimal).
230 -* **Bit address B:** The address ranges from 000.0 to fff.15. The first f from left to right represents the block number (hexadecimal); The second and third f from left to right represent the word address (hexadecimal). The value 0 to 15 after the decimal point reprensents the sub address (decimal).
231 -* **Word address S:** The word address ranges from 0 to 255 (decimal).
232 -* **Word address TS:** The address ranges from 000.0 to ffff. The first and second f from left to right represents the block number (hexadecimal); The third and fourth f from left to right represent the word address (hexadecimal).
233 -
234 -**✎Note: **Register address TP, CS, CP, N, F and TS address edit are same. D indicates decimal, and F indicates hexadecimal. Different PLC models may support different registers. See the following table.
235 -
236 -|**PLC bit address type**|**Address format**|**Address range**
237 -|I|dd.dd|I 0.0 ~~ 255.15
238 -|O|dd.dd|O 0.0 ~~ 255.15
239 -|B|fff.dd|B 000.0 ~~ fff.15
240 -|S|dd.dd|S 0.0 ~~ 255.15
241 -|N|ffff.dd|N 000.0 ~~ fff.15
242 -|**PLC word address type**|**Address format**|**Address range**
243 -|S|ddd|S0 ~~ 255
244 -|TS|ffff|TS0 ~~ FFFF
245 -|TP|ffff|TP0 ~~ FFFF
246 -|CS|ffff|CS0 ~~ FFFF
247 -|CP|ffff|CP0 ~~ FFFF
248 -|N|ffff|N0 ~~ FFFF
249 -|F|ffff|F0 ~~ FFFF
xwiki_PIStudio_12.PLC+protocols_WebHome_24f4d658173f88a9.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Hunter
Size
... ... @@ -1,1 +1,0 @@
1 -27.6 KB
Content
xwiki_PIStudio_12.PLC+protocols_WebHome_32d8ab10ec374ea6.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Hunter
Size
... ... @@ -1,1 +1,0 @@
1 -37.7 KB
Content