Hide last authors
| author | version | line-number | content |
|---|---|---|---|
 |
11.1 | 1 | = **XC MODBUS** = |
| |
2.1 | 2 | |
| |
15.2 | 3 | Support Series: Xinjie XC Series |
| 4 | |||
| |
2.1 | 5 | **HMI Settings** |
| 6 | |||
| 7 | |**Item**|**Settings**|**Note** | ||
| 8 | |Protocol|XINJE XC MODBUS| | ||
| 9 | |Connection|RS232| | ||
| 10 | |Baud rate|19200| | ||
| 11 | |Data bit|8| | ||
| 12 | |Parity|EVEN| | ||
| 13 | |Stop bit|1| | ||
| 14 | |PLC station No.|1| | ||
| 15 | |||
| 16 | **Address List** | ||
| 17 | |||
| |
15.2 | 18 | |=**Type**|=(% style="width: 301px;" %)**Device registers**|=(% style="width: 235px;" %)**Format**|=**Range**|=**Note** |
| 19 | |(% colspan="1" rowspan="6" %)Bit|(% style="width:301px" %)M|(% style="width:235px" %)MDDDD|0~~8511|Internal Relay | ||
| 20 | |(% style="width:301px" %)X|(% style="width:235px" %)XOOOO|0~~1747|Input Relay | ||
| 21 | |(% style="width:301px" %)Y|(% style="width:235px" %)YOOOO|0~~1747|Output Relay | ||
| 22 | |(% style="width:301px" %)S|(% style="width:235px" %)SDDDD|0~~1023|Flow | ||
| 23 | |(% style="width:301px" %)T|(% style="width:235px" %)TDDD|0~~618|Timer | ||
| 24 | |(% style="width:301px" %)C|(% style="width:235px" %)CDDD|0~~634|Counter | ||
| 25 | |(% colspan="1" rowspan="4" %)Word|(% style="width:301px" %)D|(% style="width:235px" %)DDDDD|0~~8511|Data Register | ||
| 26 | |(% style="width:301px" %)TD|(% style="width:235px" %)TDDDD|0~~618|Timer | ||
| 27 | |(% style="width:301px" %)CD|(% style="width:235px" %)CDDDD|0~~634|Counter | ||
| 28 | |(% style="width:301px" %)FD|(% style="width:235px" %)FDDDDD|0~~8511|FlashROM Register | ||
| |
2.1 | 29 | |
| 30 | |||
| 31 | |||
| 32 | **Cable Wiring** | ||
| 33 | |||
| 34 | |||
| |
15.2 | 35 | [[image:xwiki_PIStudio_12.PLC+protocols_WebHome_58247140e9fe4230.png||alt="image-20220830154131-2.png" height="240" width="395"]] |
| |
2.1 | 36 | |
| |
11.1 | 37 | = **XD/XE MODBUS** = |
| |
2.1 | 38 | |
| |
11.1 | 39 | Supported Series: Xinjie XD Series |
| 40 | |||
| |
2.1 | 41 | **HMI Settings** |
| 42 | |||
| 43 | |=**Item**|=**Settings**|=**Note** | ||
| 44 | |Protocol|XINJE XD/XC MODBUS| | ||
| 45 | |Connection|RS232| | ||
| 46 | |Baud rate|19200| | ||
| 47 | |Data bit|8| | ||
| 48 | |Parity|EVEN| | ||
| 49 | |Stop bit|1| | ||
| |
11.1 | 50 | |PLC station No.|1|Need to be same as PLC setting |
| |
2.1 | 51 | |
| 52 | **Address List** | ||
| 53 | |||
| |
11.1 | 54 | |=**Type**|=**Device registers**|=**Format**|=**Range**|=**Note** |
| |
14.2 | 55 | |(% colspan="1" rowspan="18" %)Bit|M|MDDDDD|0~~74999|Internal Relay |
| 56 | |X1xx|X1xxOOOO|0~~1177|Extension Module Input Relay | ||
| 57 | |X2xx|X2xxOOO|0~~277|BD Card Input Relay | ||
| 58 | |X|XOO|0~~77|Input Relay | ||
| 59 | |Y1xx|Y1xxOOOO|0~~1177|Extenson Module Output Relay | ||
| 60 | |Y2xx|Y2xxOOO|0~~277|BD Card Output Relay | ||
| 61 | |Y|YOOOO|0~~77|Output Relay | ||
| 62 | |SM|SMDDDD|0~~4999|Special Auxiliary Relay | ||
| 63 | |T|TDDDD|0~~4999|Timer | ||
| 64 | |C|CDDDD|0~~4999|Counter | ||
| 65 | |ET|ETDD|0~~31|Precise Timer | ||
| |
15.1 | 66 | |SE|SEDD|0~~31|Function Block WAIT Instruction Special Coil |
| |
14.3 | 67 | |HM|HMDDDDD|0~~11999|Power Off Retentive Internal Relay |
| 68 | |HSC|HSCDD|0~~39|High Speed Counter | ||
| |
15.1 | 69 | |HS|HSDDD|0~~999|Power Off Retentive Procedure |
| 70 | |HT|HTDDDD|0~~1999|Power Off Retentive Auxiliary Relay | ||
| |
14.3 | 71 | |HC|HCDDDD|0~~1999|Power Off Retentive Counter |
| 72 | |S|SDDDD|0~~7999|Procedure | ||
| |
14.2 | 73 | |(% colspan="1" rowspan="19" %)Word|D|DDDDDD|0~~69999|Data Register |
| 74 | |ID|IDDD|0~~99|Analog Input | ||
| 75 | |ID1xx|ID1xxDDD|0~~999|Extension Module Analog Input | ||
| 76 | |ID2xx|ID2xxDDD|0~~299|BD Card Analog Input | ||
| 77 | |QD|QDDD|0~~99|Analog Output | ||
| 78 | |QD1xx|QD1xxDDD|0~~999|Extension Module Analog Output | ||
| 79 | |QD2xx|QD2xxDDD|0~~299|BD Card Analog Output | ||
| 80 | |SD|SDDDDD|0~~4999|Data Register | ||
| 81 | |TD|TDDDD|0~~575|Timer | ||
| 82 | |CD|CDDDD|0~~575|Counter | ||
| 83 | |ETD|ETDDD|0~~31|Precise Timer | ||
| 84 | |HD|HDDDDDD|0~~24999|Data Register | ||
| 85 | |HSD|HSDDDDD|0~~1023|Power Off Retentive Data Register | ||
| 86 | |HTD|HTDDD|0~~95|Power Off Retentive Timer | ||
| 87 | |HCD|HCDDD|0~~95|Power Off Retentive Counter | ||
| 88 | |HSCD|HSCDDD|0~~31|High Speed Counter | ||
| 89 | |FD|FDDDDD|0~~8191|FlashROM Register | ||
| 90 | |SFD|SFDDDDD|0~~5999|Special Flash Register | ||
| 91 | |FS|FSDD|0~~47|Special Data Register | ||
| |
2.1 | 92 | |
| |
11.1 | 93 | **PLC Settings** |
| |
2.1 | 94 | |
| |
11.2 | 95 | Create the new project, and select the specific model according to the actual PLC |
| |
2.1 | 96 | |
| |
11.2 | 97 | (% style="text-align:center" %) |
| 98 | [[image:XinjieXDcreatenew.png]] | ||
| 99 | |||
| 100 | Program the PLC | ||
| 101 | |||
| 102 | (% style="text-align:center" %) | ||
| 103 | [[image:XinjieXDLDprg.png]] | ||
| 104 | |||
| 105 | Connect PLC with PC through RS232-USB converter cable. Click [Option]-[Software Serial Port Config]-[Communication configuration] to open the PC connection configuration. | ||
| 106 | |||
| 107 | (% style="text-align:center" %) | ||
| 108 | [[image:XinjieXDopenSWcom.png]] | ||
| 109 | |||
| 110 | New a Modbus configuration, and Click [Comm-Test] to test connection, if shows "Connect To PLC Succeeded", which means PLC connection set up successfully. And click OK to save the settings | ||
| 111 | |||
| 112 | (% style="text-align:center" %) | ||
| 113 | [[image:XinjieXDPLCtestconn.png]] | ||
| 114 | |||
| 115 | Remember to click the Status cell of new created Modbus configuration for change the status into "in use", then click OK to exit. | ||
| 116 | |||
| 117 | (% style="text-align:center" %) | ||
| 118 | [[image:XinjieXDclickto.png]] | ||
| 119 | |||
| |
11.3 | 120 | After done the previous steps, it would prompt like the below |
| |
11.2 | 121 | |
| |
11.4 | 122 | (% style="text-align:center" %) |
| 123 | [[image:XinjieXDsuccessprompt.png]] | ||
| |
11.3 | 124 | |
| |
13.1 | 125 | Change the PLC communication setup if required. Click [Configure]-[PLC Comm Port Settings]-[Add]-[Modbus]. After parameters are modified, click [Write to PLC]. |
| |
11.4 | 126 | |
| |
13.1 | 127 | (% style="text-align:center" %) |
| 128 | [[image:XinjieXDSetPLCcom0.png]] | ||
| |
11.5 | 129 | |
| |
13.1 | 130 | If wrote to PLC successfully, it would prompt like the below |
| 131 | |||
| 132 | (% style="text-align:center" %) | ||
| 133 | [[image:XinjieXDwriteComparadone.png]] | ||
| 134 | |||
| 135 | Click [Online]-[Download Program & Data], and wait for a while, the pop up window would ask for whether to stop PLC, and click [Stop PLC, contitue download] | ||
| 136 | |||
| 137 | (% style="text-align:center" %) | ||
| 138 | [[image:XinjieXDdownload.png]] | ||
| 139 | |||
| 140 | And then the XDPro ask for which options want to rewrite, and click OK to finish. | ||
| 141 | |||
| 142 | (% style="text-align:center" %) | ||
| 143 | [[image:XinjieXDdownloadopt.png]] | ||
| 144 | |||
| 145 | If download successfully, it would prompt like the below | ||
| 146 | |||
| 147 | (% style="text-align:center" %) | ||
| 148 | [[image:XinjieXDcomplete.png]] | ||
| 149 | |||
| |
2.1 | 150 | **Cable Wiring** |
| 151 | |||
| |
14.1 | 152 | (% style="text-align:center" %) |
| 153 | [[image:Xinjie.gif]] |