Skip to Content

Changes for page 06 Instructions

Last modified by Devin Chen on 2024/10/15 14:46
From version 1.1
edited by Leo Wei
on 2022/06/08 12:57
Change comment: Imported from XAR
To version 3.1
edited by Jim
on 2022/07/19 15:47
Change comment: There is no comment for this version

Summary

Details

Page properties
Title
... ... @@ -1,1 +1,1 @@
1 -06 Instruction
1 +06 Instructions
Author
... ... @@ -1,1 +1,1 @@
1 -XWiki.admin
1 +XWiki.Jim
Content
... ... @@ -1,0 +1,322 @@
1 += **6.1.1 Basic program instruction list** =
2 +
3 +(% class="table-bordered" %)
4 +|**Instruction type**|**Instruction**|**Description**|(((
5 +**LX3V(1S)**
6 +)))|**LX3V (2N)**|**LX3VP**|**LX3VE**
7 +|(% rowspan="25" %)[[Basic instructions>>path:/wiki/plc/view/2-User%20manual/6.Instruction/01.Basic%20instruction/]]|LD|Operation contact type NO (normally open)|¡|¡|¡|¡
8 +|LDI|Operation contact type NC (normally closed)|¡|¡|¡|¡
9 +|OUT|Final logical operation type coil drive|¡|¡|¡|¡
10 +|AND|Serial connection of NO(normally open)|¡|¡|¡|¡
11 +|ANI|Serial logical, operation contact type NC(normally closed) contacts|¡|¡|¡|¡
12 +|OR|Parallel, connection of NO (normally open) contacts|¡|¡|¡|¡
13 +|ORI|Parallel, connection of NC (normally closed) contacts|¡|¡|¡|¡
14 +|LDP|Initial logical, operation -Rising edge pulse|¡|¡|¡|¡
15 +|LDF|Initial logical, operation falling/trailing edge pulse|¡|¡|¡|¡
16 +|ANDP|Serial connection of Rising edge pulse|¡|¡|¡|¡
17 +|ANDF|Serial connection of falling/ trailing edge pulse|¡|¡|¡|¡
18 +|ORP|Parallel, connection of NO Rising edge pulse|¡|¡|¡|¡
19 +|ORF|Parallel connection of Falling/trailing edge pulse|¡|¡|¡|¡
20 +|ORB|Serial connection of multiple parallel circuits|¡|¡|¡|¡
21 +|ANB|Serial connection of multiple parallel circuits|¡|¡|¡|¡
22 +|MPS|Stores the current result of the internal PLC operations|¡|¡|¡|¡
23 +|MRD|Reads the current result of the internal PLC operations|¡|¡|¡|¡
24 +|MPP|Pops (recalls and removes) the currently stored result|¡|¡|¡|¡
25 +|MC|Denotes the start of a master control block|¡|¡|¡|¡
26 +|MCR|Denotes the end of a master control block|¡|¡|¡|¡
27 +|INV|Invert the current result of the internal PLC operations|¡|¡|¡|¡
28 +|PLS|Rising edge pulse|¡|¡|¡|¡
29 +|PLF|Falling / trailing edge pulse|¡|¡|¡|¡
30 +|SET|Sets a bit device permanently ON|¡|¡|¡|¡
31 +|RST|Resets a bit device permanently OFF|¡|¡|¡|¡
32 +
33 += **6.1.2 Step ladder instructions list** =
34 +
35 +(% class="table-bordered" %)
36 +|**Instruction type**|**Instruction**|**Description**|(((
37 +**LX3V**
38 +
39 +**(1S)**
40 +)))|**LX3V (2N)**|**LX3VP**|**LX3VE**
41 +|(% rowspan="2" %)[[Step ladder instructions>>path:/wiki/plc/view/2-User%20manual/6.Instruction/17.Step%20control%20instructions/]]|STL|STL programming start instruction|¡|¡|¡|¡
42 +|RET|STL programming end instruction|¡|¡|¡|¡
43 +
44 += **6.1.3 Program Flow instruction list** =
45 +
46 +(% class="table-bordered" %)
47 +|(% style="width:241px" %)**Instruction type**|(% style="width:129px" %)**Instruction**|(% style="width:306px" %)**Description**|(((
48 +**LX3V**
49 +
50 +**(1S)**
51 +)))|**LX3V (2N)**|**LX3VP**|**LX3VE**
52 +|(% rowspan="7" style="width:241px" %)[[Program flow instructions>>path:/wiki/plc/view/2-User%20manual/6.Instruction/02.Program%20flow/]]|(% style="width:129px" %)CJ|(% style="width:306px" %)Conditional jump|¡|¡|¡|¡
53 +|(% style="width:129px" %)CALL|(% style="width:306px" %)Call Subroutine|¡|¡|¡|¡
54 +|(% style="width:129px" %)EI|(% style="width:306px" %)Enable Interrupt|¡|¡|¡|¡
55 +|(% style="width:129px" %)DI|(% style="width:306px" %)Disable Interrupt|¡|¡|¡|¡
56 +|(% style="width:129px" %)WDT|(% style="width:306px" %)Watchdog Timer|¡|¡|¡|¡
57 +|(% style="width:129px" %)FOR|(% style="width:306px" %)Start of a For/Next Loop|¡|¡|¡|¡
58 +|(% style="width:129px" %)NEXT|(% style="width:306px" %)End a For/Next Loop|¡|¡|¡|¡
59 +
60 += **6.1.4 Move and Compare instruction list** =
61 +
62 +(% class="table-bordered" %)
63 +|(% style="width:314px" %)**Instruction type**|(% style="width:146px" %)**Instruction**|**Description**|(((
64 +**LX3V**
65 +
66 +**(1S)**
67 +)))|**LX3V (2N)**|**LX3VP**|**LX3VE**
68 +|(% rowspan="10" style="width:314px" %)[[Move and Compare instructions>>path:/wiki/plc/view/2-User%20manual/6.Instruction/03.Move%20and%20campare/]]|(% style="width:146px" %)CMP|Compare |¡|¡|¡|¡
69 +|(% style="width:146px" %)ZCP|Zone compare|¡|¡|¡|¡
70 +|(% style="width:146px" %)MOV|Move |¡|¡|¡|¡
71 +|(% style="width:146px" %)SMOV|Shift move|-|¡|¡|¡
72 +|(% style="width:146px" %)CML|Compliment |-|¡|¡|¡
73 +|(% style="width:146px" %)BMOV|Block move|¡|¡|¡|¡
74 +|(% style="width:146px" %)FMOV|Fill move|-|¡|¡|¡
75 +|(% style="width:146px" %)XCH|Exchange |-|¡|¡|¡
76 +|(% style="width:146px" %)BCD|Binary coded decimal|¡|¡|¡|¡
77 +|(% style="width:146px" %)BIN|Binary |¡|¡|¡|¡
78 +
79 += **6.1.5 Arithmetic and Logical Operations instruction list** =
80 +
81 +(% class="table-bordered" %)
82 +|(% style="width:358px" %)**Instruction type**|(% style="width:162px" %)**Instruction**|(% style="width:206px" %)**Description**|(((
83 +**LX3V**
84 +
85 +**(1S)**
86 +)))|**LX3V (2N)**|**LX3VP**|**LX3VE**
87 +|(% rowspan="10" style="width:358px" %)[[Arithmetic and Logical Operations instructions>>path:/wiki/plc/view/2-User%20manual/6.Instruction/06.Arithmetic%20and%20logical%20operations/]]|(% style="width:162px" %)ADD|(% style="width:206px" %)Addition |¡|¡|¡|¡
88 +|(% style="width:162px" %)SUB|(% style="width:206px" %)Subtraction |¡|¡|¡|¡
89 +|(% style="width:162px" %)MUL|(% style="width:206px" %)Multiplication |¡|¡|¡|¡
90 +|(% style="width:162px" %)DIV|(% style="width:206px" %)Division |¡|¡|¡|¡
91 +|(% style="width:162px" %)INC|(% style="width:206px" %)Increment|¡|¡|¡|¡
92 +|(% style="width:162px" %)DEC|(% style="width:206px" %)Decrement|¡|¡|¡|¡
93 +|(% style="width:162px" %)WAND|(% style="width:206px" %)Word AND|¡|¡|¡|¡
94 +|(% style="width:162px" %)WOR|(% style="width:206px" %)Word OR|¡|¡|¡|¡
95 +|(% style="width:162px" %)WXOR|(% style="width:206px" %)Word exclusive OR|¡|¡|¡|¡
96 +|(% style="width:162px" %)NEG|(% style="width:206px" %)Negation |-|¡|¡|¡
97 +
98 += **6.1.6 Rotation and Shift instruction list** =
99 +
100 +(% class="table-bordered" %)
101 +|**Instruction type**|(% style="width:134px" %)**Instruction**|(% style="width:280px" %)**Description**|(((
102 +**LX3V**
103 +
104 +**(1S)**
105 +)))|**LX3V (2N)**|**LX3VP**|**LX3VE**
106 +|(% rowspan="10" %)[[Rotation and Shift instructions>>path:/wiki/plc/view/2-User%20manual/6.Instruction/08.Rotation%20and%20shift/]]|(% style="width:134px" %)ROR|(% style="width:280px" %)Rotation right|¡|¡|¡|¡
107 +|(% style="width:134px" %)ROL|(% style="width:280px" %)Rotation left|¡|¡|¡|¡
108 +|(% style="width:134px" %)RCR|(% style="width:280px" %)16-bit rotation right with carry|-|¡|¡|¡
109 +|(% style="width:134px" %)RCL|(% style="width:280px" %)16-bit rotation left with carry|-|¡|¡|¡
110 +|(% style="width:134px" %)SFTR|(% style="width:280px" %)(bit) shift right|¡|¡|¡|¡
111 +|(% style="width:134px" %)SFTL|(% style="width:280px" %)(bit) shift left|¡|¡|¡|¡
112 +|(% style="width:134px" %)WSFR|(% style="width:280px" %)word shift right|-|¡|¡|¡
113 +|(% style="width:134px" %)WSFL|(% style="width:280px" %)word shift left|-|¡|¡|¡
114 +|(% style="width:134px" %)SFWR|(% style="width:280px" %)shift register write|¡|¡|¡|¡
115 +|(% style="width:134px" %)SFRD|(% style="width:280px" %)shift register read|¡|¡|¡|¡
116 +
117 += **6.1.7 Data operation instruction list** =
118 +
119 +(% class="table-bordered" %)
120 +|(% style="width:292px" %)**Instruction type**|(% style="width:135px" %)**Instruction**|(% style="width:266px" %)**Description**|(((
121 +**LX3V**
122 +
123 +**(1S)**
124 +)))|**LX3V (2N)**|**LX3VP**|**LX3VE**
125 +|(% rowspan="11" style="width:292px" %)[[Data operation instructions>>path:https://docs.we-con.com.cn/bin/view/PLC%20Editor/1%20User%20Manual/6.Instruction/04.Data%20operation/]]|(% style="width:135px" %)ZRST|(% style="width:266px" %)Zone reset|¡|¡|¡|¡
126 +|(% style="width:135px" %)DECO|(% style="width:266px" %)Decode |¡|¡|¡|¡
127 +|(% style="width:135px" %)ENCO|(% style="width:266px" %)Encode |¡|¡|¡|¡
128 +|(% style="width:135px" %)SUM|(% style="width:266px" %)The sum of active bits|-|¡|¡|¡
129 +|(% style="width:135px" %)BON|(% style="width:266px" %)Check specified bit status|-|¡|¡|¡
130 +|(% style="width:135px" %)MEAN|(% style="width:266px" %)Mean |-|¡|¡|¡
131 +|(% style="width:135px" %)ANS|(% style="width:266px" %)(timed) annunciator set|-|¡|¡|¡
132 +|(% style="width:135px" %)ANR|(% style="width:266px" %)Annunciator reset|-|¡|¡|¡
133 +|(% style="width:135px" %)SQR|(% style="width:266px" %)Square root|-|¡|¡|¡
134 +|(% style="width:135px" %)FLT|(% style="width:266px" %)Float |-|¡|¡|¡
135 +|(% style="width:135px" %)SWAP|(% style="width:266px" %)High and low bit conversion|-|¡|¡|¡
136 +
137 += **6.1.8 High-speed Processing Instruction** =
138 +
139 +(% class="table-bordered" %)
140 +|(% style="width:290px" %)**Instruction type**|(% style="width:137px" %)**Instruction**|**Description**|(((
141 +**LX3V**
142 +
143 +**(1S)**
144 +)))|**LX3V (2N)**|**LX3VP**|**LX3VE**
145 +|(% rowspan="10" style="width:290px" %)[[High-speed Processing Instruction>>path:/wiki/plc/view/2-User%20manual/6.Instruction/07.High%20speed%20process/]]|(% style="width:137px" %)REF|Refresh|¡|¡|¡|¡
146 +|(% style="width:137px" %)REFF|Refresh and filter adjust|-|¡|¡|¡
147 +|(% style="width:137px" %)MTR|Input matrix|¡|¡|¡|¡
148 +|(% style="width:137px" %)DHSCR|High speed counter set|¡|¡|¡|¡
149 +|(% style="width:137px" %)DHSCS|High speed counter reset|¡|¡|¡|¡
150 +|(% style="width:137px" %)DHSZ|High speed counter zone compare|-|¡|¡|¡
151 +|(% style="width:137px" %)SPD|Speed detect|¡|¡|¡|¡
152 +|(% style="width:137px" %)PLSY|16-bit pulse Y output|¡|¡|¡|¡
153 +|(% style="width:137px" %)PWM|Pulse width modulation|¡|¡|¡|¡
154 +|(% style="width:137px" %)PLSR|Ramp pulse output|¡|¡|¡|¡
155 +
156 += **6.1.9 ECAM instruction list** =
157 +
158 +(% class="table-bordered" %)
159 +|**Instruction type**|**Instruction**|**Description**|(((
160 +**LX3V**
161 +
162 +**(1S)**
163 +)))|**LX3V (2N)**|**LX3VP**|**LX3VE**
164 +|(% rowspan="3" %)[[ECAM instruction>>path:/wiki/plc/view/2-User%20manual/6.Instruction/10.ECAM/]]|DECAM|ECAM configuration|-|-|-|¡
165 +|DEGEAR|Electronic gear configuration|-|-|-|¡
166 +|ECAMTBX|Create E-CAM datasheet|-|-|-|¡
167 +
168 += **6.1.10 External I/O Devices instruction list** =
169 +
170 +(% class="table-bordered" %)
171 +|**Instruction type**|**Instruction**|**Description**|(((
172 +**LX3V**
173 +
174 +**(1S)**
175 +)))|**LX3V (2N)**|**LX3VP**|**LX3VE**
176 +|(% rowspan="12" %)[[External I/O device instruction>>path:/wiki/plc/view/2-User%20manual/6.Instruction/09.External%20IO%20Devices/]]|TKY|Ten key input|-|¡|¡|¡
177 +|HKY|Hexadecimal input|-|¡|¡|¡
178 +|DSW|Digital switch (thumbwheel input)|¡|¡|¡|¡
179 +|SEGD|Seven segment decoder|-|¡|¡|¡
180 +|SEGL|Seven segment with latch|¡|¡|¡|¡
181 +|ARWS|Arrow switch|-|¡|¡|¡
182 +|ASC|ASCII code|-|¡|¡|¡
183 +|PR|“print” to a display|-|¡|¡|¡
184 +|FROM|Read from a special function block|¡|¡|¡|¡
185 +|TO|Write to a special function block|¡|¡|¡|¡
186 +|GRY|Converts binary integer to GRAY code|-|¡|¡|¡
187 +|GBIN|Converts GRAY CODE to binary|-|¡|¡|¡
188 +
189 += **6.1.11 External Devices instruction list** =
190 +
191 +(% class="table-bordered" %)
192 +|**Instruction type**|**Instruction**|**Description**|(((
193 +**LX3V**
194 +
195 +**(1S)**
196 +)))|**LX3V (2N)**|**LX3VP**|**LX3VE**
197 +|(% rowspan="9" %)[[External devices instruction>>path:/wiki/plc/view/2-User%20manual/6.Instruction/13.External%20Device%20SER%20instruction/]]|RS|RS communications|¡|¡|¡|¡
198 +|RS2|RS2 communications|¡|¡|¡|¡
199 +|CPAVL|Serial port settings|¡|¡|¡|¡
200 +|CPAVL|Ethernet port settings|¡|¡|¡|¡
201 +|PRUN|Octal bit transmission|¡|¡|¡|¡
202 +|ASCI|hexadecimal to ASCII|¡|¡|¡|¡
203 +|HEX|ASCII to hexadecimal|¡|¡|¡|¡
204 +|CCD|check code|¡|¡|¡|¡
205 +|PID|PID control loop|¡|¡|¡|¡
206 +
207 += **6.1.12 Floating Point instruction list** =
208 +
209 +(% class="table-bordered" %)
210 +|**Instruction type**|**Instruction**|**Description**|(((
211 +**LX3V**
212 +
213 +**(1S)**
214 +)))|**LX3V (2N)**|**LX3VP**|**LX3VE**
215 +|(% rowspan="22" %)[[Floating point instruction>>path:/wiki/plc/view/2-User%20manual/6.Instruction/14.Floating%20calculation/]]|DECMP|Binary floating point data compare|-|¡|¡|¡
216 +|DEZCP|Binary floating point zone compare|-|¡|¡|¡
217 +|DEBCD|Binary to BCD floating point data conversion|-|¡|¡|¡
218 +|DEBIN|BCD to Binary floating point data conversion|-|¡|¡|¡
219 +|DEADD|Binary floating point addition|-|¡|¡|¡
220 +|DESUB|Binary floating point subtraction|-|¡|¡|¡
221 +|DEMUL|Binary floating point multiplication|-|¡|¡|¡
222 +|DEDIV|Binary floating point division|-|¡|¡|¡
223 +|DESQR|Binary floating point square root|-|¡|¡|¡
224 +|INT|16-bit binary floating point to integer|-|¡|¡|¡
225 +|DSIN|Sin operation|-|¡|¡|¡
226 +|DCOS|Cosine operation|-|¡|¡|¡
227 +|DTAN|Tangent operation|-|¡|¡|¡
228 +|DASIN|Calculate radian value, according to the corresponding value of SIN|-|-|¡|¡
229 +|DSINH|Binary floating point operation of Hyperbolic Sine function SINH|-|-|¡|¡
230 +|DACOS|Calculate radian value, according to the corresponding value of COS|-|-|¡|¡
231 +|DCOSH|Binary floating point operation of Hyperbolic Cosine function COSH|-|-|¡|¡
232 +|DATAN|Calculate radian value, according to the corresponding value of TAN|-|-|¡|¡
233 +|DTANH|Binary floating point operation of Hyperbolic Tangent function TANH|-|-|¡|¡
234 +|DEXP|Perform exponent operation of binary floating-point number to base e (2.71828)|-|-|¡|¡
235 +|DLOG10|Perform common logarithm operation of binary floating-point number to base 10|-|-|¡|¡
236 +|DLOGE|Perform natural logarithm operation of binary floating-point number to base e (2.71828)|-|-|¡|¡
237 +
238 += **6.1.13 Positioning Instruction list** =
239 +
240 +(% class="table-bordered" %)
241 +|**Instruction type**|**Instruction**|**Description**|(((
242 +**LX3V**
243 +
244 +**(1S)**
245 +)))|**LX3V (2N)**|**LX3VP**|**LX3VE**
246 +|(% rowspan="5" %)[[Positioning instruction>>path:/wiki/plc/view/2-User%20manual/6.Instruction/12.Positioning%20control/]]|DABS|Absolute current value read|¡|¡|¡|¡
247 +|ZRN|Setting of zero return speed|¡|¡|¡|¡
248 +|PLSV|Variable speed pulse output|¡|¡|¡|¡
249 +|DRVI|Relative position control|¡|¡|¡|¡
250 +|DRVA|Absolute position control|¡|¡|¡|¡
251 +
252 +**4.14 Real Time Clock Control**
253 +
254 +(% class="table-bordered" %)
255 +|**Instruction type**|**Instruction**|**Description**|(((
256 +**LX3V**
257 +
258 +**(1S)**
259 +)))|**LX3V (2N)**|**LX3VP**|**LX3VE**
260 +|(% rowspan="7" %)[[Real time clock control>>path:/wiki/plc/view/2-User%20manual/6.Instruction/05.Real%20time%20clock/]]|TCMP|time compare|¡|¡|¡|¡
261 +|TZCP|time zone compare|¡|¡|¡|¡
262 +|TADD|time addition|¡|¡|¡|¡
263 +|TSUB|time subtraction|¡|¡|¡|¡
264 +|TRD|read RTC data|¡|¡|¡|¡
265 +|TWR|set RTC data|¡|¡|¡|¡
266 +|HOUR|16-bit chronograph|¡|¡|¡|¡
267 +
268 += **6.1.14 Handy Instructions list** =
269 +
270 +(% class="table-bordered" %)
271 +|**Instruction type**|**Instruction**|**Description**|(((
272 +**LX3V(1S)**
273 +)))|**LX3V (2N)**|**LX3VP**|**LX3VE**
274 +|(% rowspan="10" %)[[Handy instruction>>path:/wiki/plc/view/2-User%20manual/6.Instruction/11.Handy%20instructions/]]|IST|initial state|¡|¡|¡|¡
275 +|SER|Search |-|¡|¡|¡
276 +|ABSD|Absolute drum|¡|¡|¡|¡
277 +|INCD|Incremental drum|¡|¡|¡|¡
278 +|TTMR|Teaching timer|-|¡|¡|¡
279 +|STMR|Special timer - definable|-|¡|¡|¡
280 +|ALT|Alternate state|¡|¡|¡|¡
281 +|RAMP|Ramp - variable value|¡|¡|¡|¡
282 +|ROTC|Rotary table control|-|¡|¡|¡
283 +|SORT|Sort data|-|¡|¡|¡
284 +
285 += **6.1.15 Circular interpolation instruction list** =
286 +
287 +(% class="table-bordered" %)
288 +|**Instruction type**|**Instruction**|**Decryption**|**LX3V**|**LX3VP**|**LX3VE**|**LX3VM**
289 +|(% rowspan="6" %)[[Circular interpolation instruction>>path:/wiki/plc/view/2-User%20manual/6.Instruction/15.Circular%20interpolation%20instruction/]]|G90G01|Absolute position line interpolation|-|-|-|¡
290 +|G91G01|Relative position line interpolation|-|-|-|¡
291 +|G90G02|Absolute position of the clockwise circular interpolation|-|-|-|¡
292 +|G91G02|Relative position clockwise circular interpolation|-|-|-|¡
293 +|G90G03|Absolute position anticlockwise circular interpolation|-|-|-|¡
294 +|G91G03|Relative position anticlockwise circular interpolation|-|-|-|¡
295 +
296 += **6.1.16 Inline Comparisons Instruction list** =
297 +
298 +(% class="table-bordered" %)
299 +|(% style="width:260px" %)**Instruction type**|(% style="width:107px" %)**Instruction**|(% style="width:345px" %)**Description**|(((
300 +**LX3V**
301 +
302 +**(1S)**
303 +)))|**LX3V (2N)**|**LX3VP**|**LX3VE**
304 +|(% rowspan="19" style="width:260px" %)Inline comparisons instruction|(% style="width:107px" %)LD=|(% style="width:345px" %)Comparison of 16-bit data (==)|¡|¡|¡|¡
305 +|(% style="width:107px" %)LD>|(% style="width:345px" %)Comparison of 16-bit data (>|¡|¡|¡|¡
306 +|(% style="width:107px" %)LD<|(% style="width:345px" %)Comparison of 16-bit data (<|¡|¡|¡|¡
307 +|(% style="width:107px" %)LD<>|(% style="width:345px" %)Comparison of 16-bit data (<>|¡|¡|¡|¡
308 +|(% style="width:107px" %)LD<=|(% style="width:345px" %)Comparison of 16-bit data (<=)|¡|¡|¡|¡
309 +|(% style="width:107px" %)LD>=|(% style="width:345px" %)Comparison of 16-bit data (>=)|¡|¡|¡|¡
310 +|(% style="width:107px" %)AND=|(% style="width:345px" %)Comparison of 16-bit data (==)|¡|¡|¡|¡
311 +|(% style="width:107px" %)AND>|(% style="width:345px" %)Comparison of 16-bit data (>|¡|¡|¡|¡
312 +|(% style="width:107px" %)AND<|(% style="width:345px" %)Comparison of 16-bit data (<|¡|¡|¡|¡
313 +|(% style="width:107px" %)AND<>|(% style="width:345px" %)Comparison of 16-bit data (<>|¡|¡|¡|¡
314 +|(% style="width:107px" %)AND<=|(% style="width:345px" %)Comparison of 16-bit data (<=)|¡|¡|¡|¡
315 +|(% style="width:107px" %)AND>=|(% style="width:345px" %)Comparison of 16-bit data (>=)|¡|¡|¡|¡
316 +|(% style="width:107px" %)OR=|(% style="width:345px" %)Comparison of 16-bit data (==)|¡|¡|¡|¡
317 +|(% style="width:107px" %)ORD=|(% style="width:345px" %)Comparison of 32-bit data (==)|¡|¡|¡|¡
318 +|(% style="width:107px" %)OR>|(% style="width:345px" %)Comparison of 16-bit data (>|¡|¡|¡|¡
319 +|(% style="width:107px" %)OR<|(% style="width:345px" %)Comparison of 16-bit data (<|¡|¡|¡|¡
320 +|(% style="width:107px" %)OR<>|(% style="width:345px" %)Comparison of 16-bit data (<>|¡|¡|¡|¡
321 +|(% style="width:107px" %)OR<=|(% style="width:345px" %)Comparison of 16-bit data (<=)|¡|¡|¡|¡
322 +|(% style="width:107px" %)OR>=|(% style="width:345px" %)Comparison of 16-bit data (>=)|¡|¡|¡|¡