Changes for page 06 Instructions

Last modified by Devin Chen on 2024/10/15 14:46

From 6.3 to 6.2

From version 6.2

edited by Stone Wu
on 2022/07/20 10:28

Change comment: Update document after refactoring.

To version 1.1

edited by Leo Wei
on 2022/06/08 12:57

Change comment: Imported from XAR

Raw
Rendered

Summary

Page properties (4 modified, 0 added, 0 removed)

Details

Page properties

Title

@@ -1,1 +1,1 @@
--06 Instructions
++06 Instruction

Parent

@@ -1,1 +1,1 @@
--PLC Editor.LX3V programing manual.WebHome
++PLC Editor.1 User Manual.WebHome

Author

@@ -1,1 +1,1 @@
--XWiki.Stone
++XWiki.admin

Content

@@ -1,305 +1,0 @@
--= **6.1.1 Basic program instruction list** =
--
--|**Instruction type**|**Instruction**|**Description**|(((
--**LX3V(1S)**
--)))|**LX3V (2N)**|**LX3VP**|**LX3VE**
--|(% rowspan="25" %)[[Basic instructions>>path:/wiki/plc/view/2-User%20manual/6.Instruction/01.Basic%20instruction/]]|LD|Operation contact type NO (normally open)|¡|¡|¡|¡
--|LDI|Operation contact type NC (normally closed)|¡|¡|¡|¡
--|OUT|Final logical operation type coil drive|¡|¡|¡|¡
--|AND|Serial connection of NO(normally open)|¡|¡|¡|¡
--|ANI|Serial logical, operation contact type NC(normally closed) contacts|¡|¡|¡|¡
--|OR|Parallel, connection of NO (normally open) contacts|¡|¡|¡|¡
--|ORI|Parallel, connection of NC (normally closed) contacts|¡|¡|¡|¡
--|LDP|Initial logical, operation -Rising edge pulse|¡|¡|¡|¡
--|LDF|Initial logical, operation falling/trailing edge pulse|¡|¡|¡|¡
--|ANDP|Serial connection of Rising edge pulse|¡|¡|¡|¡
--|ANDF|Serial connection of falling/ trailing edge pulse|¡|¡|¡|¡
--|ORP|Parallel, connection of NO Rising edge pulse|¡|¡|¡|¡
--|ORF|Parallel connection of Falling/trailing edge pulse|¡|¡|¡|¡
--|ORB|Serial connection of multiple parallel circuits|¡|¡|¡|¡
--|ANB|Serial connection of multiple parallel circuits|¡|¡|¡|¡
--|MPS|Stores the current result of the internal PLC operations|¡|¡|¡|¡
--|MRD|Reads the current result of the internal PLC operations|¡|¡|¡|¡
--|MPP|Pops (recalls and removes) the currently stored result|¡|¡|¡|¡
--|MC|Denotes the start of a master control block|¡|¡|¡|¡
--|MCR|Denotes the end of a master control block|¡|¡|¡|¡
--|INV|Invert the current result of the internal PLC operations|¡|¡|¡|¡
--|PLS|Rising edge pulse|¡|¡|¡|¡
--|PLF|Falling / trailing edge pulse|¡|¡|¡|¡
--|SET|Sets a bit device permanently ON|¡|¡|¡|¡
--|RST|Resets a bit device permanently OFF|¡|¡|¡|¡
--
--= **6.1.2 Step ladder instructions list** =
--
--|**Instruction type**|**Instruction**|**Description**|(((
--**LX3V**
--
--**(1S)**
--)))|**LX3V (2N)**|**LX3VP**|**LX3VE**
--|(% rowspan="2" %)[[Step ladder instructions>>path:/wiki/plc/view/2-User%20manual/6.Instruction/17.Step%20control%20instructions/]]|STL|STL programming start instruction|¡|¡|¡|¡
--|RET|STL programming end instruction|¡|¡|¡|¡
--
--= **6.1.3 Program Flow instruction list** =
--
--|**Instruction type**|**Instruction**|**Description**|(((
--**LX3V**
--
--**(1S)**
--)))|**LX3V (2N)**|**LX3VP**|**LX3VE**
--|(% rowspan="7" %)[[Program flow instructions>>path:/wiki/plc/view/2-User%20manual/6.Instruction/02.Program%20flow/]]|CJ|Conditional jump|¡|¡|¡|¡
--|CALL|Call Subroutine|¡|¡|¡|¡
--|EI|Enable Interrupt|¡|¡|¡|¡
--|DI|Disable Interrupt|¡|¡|¡|¡
--|WDT|Watchdog Timer|¡|¡|¡|¡
--|FOR|Start of a For/Next Loop|¡|¡|¡|¡
--|NEXT|End a For/Next Loop|¡|¡|¡|¡
--
--= **6.1.4 Move and Compare instruction list** =
--
--|**Instruction type**|**Instruction**|**Description**|(((
--**LX3V**
--
--**(1S)**
--)))|**LX3V (2N)**|**LX3VP**|**LX3VE**
--|(% rowspan="10" %)[[Move and Compare instructions>>path:/wiki/plc/view/2-User%20manual/6.Instruction/03.Move%20and%20campare/]]|CMP|Compare |¡|¡|¡|¡
--|ZCP|Zone compare|¡|¡|¡|¡
--|MOV|Move |¡|¡|¡|¡
--|SMOV|Shift move|-|¡|¡|¡
--|CML|Compliment |-|¡|¡|¡
--|BMOV|Block move|¡|¡|¡|¡
--|FMOV|Fill move|-|¡|¡|¡
--|XCH|Exchange |-|¡|¡|¡
--|BCD|Binary coded decimal|¡|¡|¡|¡
--|BIN|Binary |¡|¡|¡|¡
--
--= **6.1.5 Arithmetic and Logical Operations instruction list** =
--
--|**Instruction type**|**Instruction**|**Description**|(((
--**LX3V**
--
--**(1S)**
--)))|**LX3V (2N)**|**LX3VP**|**LX3VE**
--|(% rowspan="10" %)[[Arithmetic and Logical Operations instructions>>path:/wiki/plc/view/2-User%20manual/6.Instruction/06.Arithmetic%20and%20logical%20operations/]]|ADD|Addition |¡|¡|¡|¡
--|SUB|Subtraction |¡|¡|¡|¡
--|MUL|Multiplication |¡|¡|¡|¡
--|DIV|Division |¡|¡|¡|¡
--|INC|Increment|¡|¡|¡|¡
--|DEC|Decrement|¡|¡|¡|¡
--|WAND|Word AND|¡|¡|¡|¡
--|WOR|Word OR|¡|¡|¡|¡
--|WXOR|Word exclusive OR|¡|¡|¡|¡
--|NEG|Negation |-|¡|¡|¡
--
--= **6.1.6 Rotation and Shift instruction list** =
--
--|**Instruction type**|**Instruction**|**Description**|(((
--**LX3V**
--
--**(1S)**
--)))|**LX3V (2N)**|**LX3VP**|**LX3VE**
--|(% rowspan="10" %)[[Rotation and Shift instructions>>path:/wiki/plc/view/2-User%20manual/6.Instruction/08.Rotation%20and%20shift/]]|ROR|Rotation right|¡|¡|¡|¡
--|ROL|Rotation left|¡|¡|¡|¡
--|RCR|16-bit rotation right with carry|-|¡|¡|¡
--|RCL|16-bit rotation left with carry|-|¡|¡|¡
--|SFTR|(bit) shift right|¡|¡|¡|¡
--|SFTL|(bit) shift left|¡|¡|¡|¡
--|WSFR|word shift right|-|¡|¡|¡
--|WSFL|word shift left|-|¡|¡|¡
--|SFWR|shift register write|¡|¡|¡|¡
--|SFRD|shift register read|¡|¡|¡|¡
--
--= **6.1.7 Data operation instruction list** =
--
--|**Instruction type**|**Instruction**|**Description**|(((
--**LX3V**
--
--**(1S)**
--)))|**LX3V (2N)**|**LX3VP**|**LX3VE**
--|(% rowspan="11" %)[[Data operation instructions>>path:/wiki/plc/view/2-User%20manual/6.Instruction/04.Data%20operation/]]|ZRST|Zone reset|¡|¡|¡|¡
--|DECO|Decode |¡|¡|¡|¡
--|ENCO|Encode |¡|¡|¡|¡
--|SUM|The sum of active bits|-|¡|¡|¡
--|BON|Check specified bit status|-|¡|¡|¡
--|MEAN|Mean |-|¡|¡|¡
--|ANS|(timed) annunciator set|-|¡|¡|¡
--|ANR|Annunciator reset|-|¡|¡|¡
--|SQR|Square root|-|¡|¡|¡
--|FLT|Float |-|¡|¡|¡
--|SWAP|High and low bit conversion|-|¡|¡|¡
--
--= **6.1.8 High-speed Processing Instruction** =
--
--|**Instruction type**|**Instruction**|**Description**|(((
--**LX3V**
--
--**(1S)**
--)))|**LX3V (2N)**|**LX3VP**|**LX3VE**
--|(% rowspan="10" %)[[High-speed Processing Instruction>>path:/wiki/plc/view/2-User%20manual/6.Instruction/07.High%20speed%20process/]]|REF|Refresh|¡|¡|¡|¡
--|REFF|Refresh and filter adjust|-|¡|¡|¡
--|MTR|Input matrix|¡|¡|¡|¡
--|DHSCR|High speed counter set|¡|¡|¡|¡
--|DHSCS|High speed counter reset|¡|¡|¡|¡
--|DHSZ|High speed counter zone compare|-|¡|¡|¡
--|SPD|Speed detect|¡|¡|¡|¡
--|PLSY|16-bit pulse Y output|¡|¡|¡|¡
--|PWM|Pulse width modulation|¡|¡|¡|¡
--|PLSR|Ramp pulse output|¡|¡|¡|¡
--
--= **6.1.9 ECAM instruction list** =
--
--|**Instruction type**|**Instruction**|**Description**|(((
--**LX3V**
--
--**(1S)**
--)))|**LX3V (2N)**|**LX3VP**|**LX3VE**
--|(% rowspan="3" %)[[ECAM instruction>>path:/wiki/plc/view/2-User%20manual/6.Instruction/10.ECAM/]]|DECAM|ECAM configuration|-|-|-|¡
--|DEGEAR|Electronic gear configuration|-|-|-|¡
--|ECAMTBX|Create E-CAM datasheet|-|-|-|¡
--
--= **6.1.10 External I/O Devices instruction list** =
--
--|**Instruction type**|**Instruction**|**Description**|(((
--**LX3V**
--
--**(1S)**
--)))|**LX3V (2N)**|**LX3VP**|**LX3VE**
--|(% rowspan="12" %)[[External I/O device instruction>>path:/wiki/plc/view/2-User%20manual/6.Instruction/09.External%20IO%20Devices/]]|TKY|Ten key input|-|¡|¡|¡
--|HKY|Hexadecimal input|-|¡|¡|¡
--|DSW|Digital switch (thumbwheel input)|¡|¡|¡|¡
--|SEGD|Seven segment decoder|-|¡|¡|¡
--|SEGL|Seven segment with latch|¡|¡|¡|¡
--|ARWS|Arrow switch|-|¡|¡|¡
--|ASC|ASCII code|-|¡|¡|¡
--|PR|“print” to a display|-|¡|¡|¡
--|FROM|Read from a special function block|¡|¡|¡|¡
--|TO|Write to a special function block|¡|¡|¡|¡
--|GRY|Converts binary integer to GRAY code|-|¡|¡|¡
--|GBIN|Converts GRAY CODE to binary|-|¡|¡|¡
--
--= **6.1.11 External Devices instruction list** =
--
--|**Instruction type**|**Instruction**|**Description**|(((
--**LX3V**
--
--**(1S)**
--)))|**LX3V (2N)**|**LX3VP**|**LX3VE**
--|(% rowspan="9" %)[[External devices instruction>>path:/wiki/plc/view/2-User%20manual/6.Instruction/13.External%20Device%20SER%20instruction/]]|RS|RS communications|¡|¡|¡|¡
--|RS2|RS2 communications|¡|¡|¡|¡
--|CPAVL|Serial port settings|¡|¡|¡|¡
--|CPAVL|Ethernet port settings|¡|¡|¡|¡
--|PRUN|Octal bit transmission|¡|¡|¡|¡
--|ASCI|hexadecimal to ASCII|¡|¡|¡|¡
--|HEX|ASCII to hexadecimal|¡|¡|¡|¡
--|CCD|check code|¡|¡|¡|¡
--|PID|PID control loop|¡|¡|¡|¡
--
--= **6.1.12 Floating Point instruction list** =
--
--|**Instruction type**|**Instruction**|**Description**|(((
--**LX3V**
--
--**(1S)**
--)))|**LX3V (2N)**|**LX3VP**|**LX3VE**
--|(% rowspan="22" %)[[Floating point instruction>>path:/wiki/plc/view/2-User%20manual/6.Instruction/14.Floating%20calculation/]]|DECMP|Binary floating point data compare|-|¡|¡|¡
--|DEZCP|Binary floating point zone compare|-|¡|¡|¡
--|DEBCD|Binary to BCD floating point data conversion|-|¡|¡|¡
--|DEBIN|BCD to Binary floating point data conversion|-|¡|¡|¡
--|DEADD|Binary floating point addition|-|¡|¡|¡
--|DESUB|Binary floating point subtraction|-|¡|¡|¡
--|DEMUL|Binary floating point multiplication|-|¡|¡|¡
--|DEDIV|Binary floating point division|-|¡|¡|¡
--|DESQR|Binary floating point square root|-|¡|¡|¡
--|INT|16-bit binary floating point to integer|-|¡|¡|¡
--|DSIN|Sin operation|-|¡|¡|¡
--|DCOS|Cosine operation|-|¡|¡|¡
--|DTAN|Tangent operation|-|¡|¡|¡
--|DASIN|Calculate radian value, according to the corresponding value of SIN|-|-|¡|¡
--|DSINH|Binary floating point operation of Hyperbolic Sine function SINH|-|-|¡|¡
--|DACOS|Calculate radian value, according to the corresponding value of COS|-|-|¡|¡
--|DCOSH|Binary floating point operation of Hyperbolic Cosine function COSH|-|-|¡|¡
--|DATAN|Calculate radian value, according to the corresponding value of TAN|-|-|¡|¡
--|DTANH|Binary floating point operation of Hyperbolic Tangent function TANH|-|-|¡|¡
--|DEXP|Perform exponent operation of binary floating-point number to base e (2.71828)|-|-|¡|¡
--|DLOG10|Perform common logarithm operation of binary floating-point number to base 10|-|-|¡|¡
--|DLOGE|Perform natural logarithm operation of binary floating-point number to base e (2.71828)|-|-|¡|¡
--
--= **6.1.13 Positioning Instruction list** =
--
--|**Instruction type**|**Instruction**|**Description**|(((
--**LX3V**
--
--**(1S)**
--)))|**LX3V (2N)**|**LX3VP**|**LX3VE**
--|(% rowspan="5" %)[[Positioning instruction>>path:/wiki/plc/view/2-User%20manual/6.Instruction/12.Positioning%20control/]]|DABS|Absolute current value read|¡|¡|¡|¡
--|ZRN|Setting of zero return speed|¡|¡|¡|¡
--|PLSV|Variable speed pulse output|¡|¡|¡|¡
--|DRVI|Relative position control|¡|¡|¡|¡
--|DRVA|Absolute position control|¡|¡|¡|¡
--
--**4.14 Real Time Clock Control**
--
--|**Instruction type**|**Instruction**|**Description**|(((
--**LX3V**
--
--**(1S)**
--)))|**LX3V (2N)**|**LX3VP**|**LX3VE**
--|(% rowspan="7" %)[[Real time clock control>>path:/wiki/plc/view/2-User%20manual/6.Instruction/05.Real%20time%20clock/]]|TCMP|time compare|¡|¡|¡|¡
--|TZCP|time zone compare|¡|¡|¡|¡
--|TADD|time addition|¡|¡|¡|¡
--|TSUB|time subtraction|¡|¡|¡|¡
--|TRD|read RTC data|¡|¡|¡|¡
--|TWR|set RTC data|¡|¡|¡|¡
--|HOUR|16-bit chronograph|¡|¡|¡|¡
--
--= **6.1.14 Handy Instructions list** =
--
--|**Instruction type**|**Instruction**|**Description**|(((
--**LX3V(1S)**
--)))|**LX3V (2N)**|**LX3VP**|**LX3VE**
--|(% rowspan="10" %)[[Handy instruction>>path:/wiki/plc/view/2-User%20manual/6.Instruction/11.Handy%20instructions/]]|IST|initial state|¡|¡|¡|¡
--|SER|Search |-|¡|¡|¡
--|ABSD|Absolute drum|¡|¡|¡|¡
--|INCD|Incremental drum|¡|¡|¡|¡
--|TTMR|Teaching timer|-|¡|¡|¡
--|STMR|Special timer - definable|-|¡|¡|¡
--|ALT|Alternate state|¡|¡|¡|¡
--|RAMP|Ramp - variable value|¡|¡|¡|¡
--|ROTC|Rotary table control|-|¡|¡|¡
--|SORT|Sort data|-|¡|¡|¡
--
--= **6.1.15 Circular interpolation instruction list** =
--
--|**Instruction type**|**Instruction**|**Decryption**|**LX3V**|**LX3VP**|**LX3VE**|**LX3VM**
--|(% rowspan="6" %)[[Circular interpolation instruction>>path:/wiki/plc/view/2-User%20manual/6.Instruction/15.Circular%20interpolation%20instruction/]]|G90G01|Absolute position line interpolation|-|-|-|¡
--|G91G01|Relative position line interpolation|-|-|-|¡
--|G90G02|Absolute position of the clockwise circular interpolation|-|-|-|¡
--|G91G02|Relative position clockwise circular interpolation|-|-|-|¡
--|G90G03|Absolute position anticlockwise circular interpolation|-|-|-|¡
--|G91G03|Relative position anticlockwise circular interpolation|-|-|-|¡
--
--= **6.1.16 Inline Comparisons Instruction list** =
--
--|**Instruction type**|**Instruction**|**Description**|(((
--**LX3V**
--
--**(1S)**
--)))|**LX3V (2N)**|**LX3VP**|**LX3VE**
--|(% rowspan="19" %)Inline comparisons instruction|LD=|Comparison of 16-bit data (==)|¡|¡|¡|¡
--|LD>|Comparison of 16-bit data (>|¡|¡|¡|¡
--|LD<|Comparison of 16-bit data (<|¡|¡|¡|¡
--|LD<>|Comparison of 16-bit data (<>|¡|¡|¡|¡
--|LD<=|Comparison of 16-bit data (<=)|¡|¡|¡|¡
--|LD>=|Comparison of 16-bit data (>=)|¡|¡|¡|¡
--|AND=|Comparison of 16-bit data (==)|¡|¡|¡|¡
--|AND>|Comparison of 16-bit data (>|¡|¡|¡|¡
--|AND<|Comparison of 16-bit data (<|¡|¡|¡|¡
--|AND<>|Comparison of 16-bit data (<>|¡|¡|¡|¡
--|AND<=|Comparison of 16-bit data (<=)|¡|¡|¡|¡
--|AND>=|Comparison of 16-bit data (>=)|¡|¡|¡|¡
--|OR=|Comparison of 16-bit data (==)|¡|¡|¡|¡
--|ORD=|Comparison of 32-bit data (==)|¡|¡|¡|¡
--|OR>|Comparison of 16-bit data (>|¡|¡|¡|¡
--|OR<|Comparison of 16-bit data (<|¡|¡|¡|¡
--|OR<>|Comparison of 16-bit data (<>|¡|¡|¡|¡
--|OR<=|Comparison of 16-bit data (<=)|¡|¡|¡|¡
--|OR>=|Comparison of 16-bit data (>=)|¡|¡|¡|¡

Changes for page 06 Instructions

Summary

Details

Navigation

Table of Contents