Changes for page 12 Clock operation

Last modified by Mora Zhou on 2023/11/21 17:27

From 1.3 to 1.4 From 5.1 to 6.1

From version 1.4

edited by Joey
on 2022/06/09 15:32

Change comment: (Autosaved)

To version 5.1

edited by Jim
on 2022/07/13 16:40

Change comment: There is no comment for this version

Raw
Rendered

Summary

Page properties (4 modified, 0 added, 0 removed)

Details

Page properties

Title

...	...	@@ -1,0 +1,1 @@
	1	+12 Clock operation instruction

Parent

@@ -1,1 +1,1 @@
--PLC Editor2.1 User manual.2\.1 LX5V user manual.WebHome
++PLC Editor2.1 User manual.2\.1 LX5V user manual.07.WebHome

Author

@@ -1,1 +1,1 @@
--XWiki.Joey
++XWiki.Jim

Content

@@ -1,388 +386,3 @@
--= **Contact comparison instruction** =
--
--== **Signed 16-bit contact comparison instruction** ==
--
--**LD £, AND £, OR £**
--
--The BIN 16-bit data of the device specified in (s1) and the BIN 16-bit data of the device specified in (s2) are compared by normal open contact processing.
--
--LD£: Normally open contact comparison instruction
--
--AND£: Normally open contact series connection comparison instruction
--
--OR£: Normally open contact parallel connection comparison instruction
--
--**Ladder diagram**
--
--(% style="text-align:center" %)
--[[image:07-5 Basic instructions_html_63210db6b7e1512f.png]]
--
--(You can enter "=", "<>", ">", "<", ">=", "<=" in "£")
--
--**Content, range and data type**
--
--|**Parameter**|**Content**|**Range**|**Data type**|**Data type (label)**
--|(s1)|Comparison data or device storing comparison data|-32768 to 32767|Signed BIN 16 bit|ANY16_S
--|(s2)|Comparison data or device storing comparison data|-32768 to 32767|Signed BIN 16 bit|ANY16_S
--
--**Device used**
--
--|(% rowspan="2" %)**Instruction**|(% rowspan="2" %)**Parameter**|(% colspan="11" %)**Devices**|(((
--**Offset modification**
--)))|(((
--**Pulse extension**
--)))
--|**KnX**|**KnY**|**KnM**|**KnS**|**T**|**C**|**D**|**R**|**SD**|**K**|**H**|**[D]**|**XXP**
--|LD=|s1, s2|●|●|●|●|●|●|●|●|●|●|●|●|
--|LD>|s1, s2|●|●|●|●|●|●|●|●|●|●|●|●|
--|LD<|s1, s2|●|●|●|●|●|●|●|●|●|●|●|●|
--|LD>=|s1, s2|●|●|●|●|●|●|●|●|●|●|●|●|
--|LD<=|s1, s2|●|●|●|●|●|●|●|●|●|●|●|●|
--|LD<>|s1, s2|●|●|●|●|●|●|●|●|●|●|●|●|
--|AND=|s1, s2|●|●|●|●|●|●|●|●|●|●|●|●|
--|AND>|s1, s2|●|●|●|●|●|●|●|●|●|●|●|●|
--|AND<|s1, s2|●|●|●|●|●|●|●|●|●|●|●|●|
--|AND>=|s1, s2|●|●|●|●|●|●|●|●|●|●|●|●|
--|AND<=|s1, s2|●|●|●|●|●|●|●|●|●|●|●|●|
--|AND<>|s1, s2|●|●|●|●|●|●|●|●|●|●|●|●|
--|OR=|s1, s2|●|●|●|●|●|●|●|●|●|●|●|●|
--|OR>|s1, s2|●|●|●|●|●|●|●|●|●|●|●|●|
--|OR<|s1, s2|●|●|●|●|●|●|●|●|●|●|●|●|
--|OR>=|s1, s2|●|●|●|●|●|●|●|●|●|●|●|●|
--|OR<=|s1, s2|●|●|●|●|●|●|●|●|●|●|●|●|
--|OR<>|s1, s2|●|●|●|●|●|●|●|●|●|●|●|●|
--
--**Features**
--
--The BIN 16-bit data of the device specified in (s1) and the BIN 16-bit data of the device specified in (s2) are compared by normal open contact processing.
--
--The comparison operation result of each instruction is shown below.
--
--|**Instruction Sign**|**Condition**|**Comparison operation result**|**Instruction Sign**|**Condition**|**Comparison operation result**
--|==|(s1)=(s2)|(% rowspan="6" %)On state|==|(s1)≠(s2)|(% rowspan="6" %)Non-conduction state
--|<>|(s1)≠(s2)|<>|(s1)=(s2)
--|>|(s1)>(s2)|>|(s1)≤(s2)
--|<|(s1)<(s2)|<|(s1)≥(s2)
--|>=|(s1)≥(s2)|>=|(s1)<(s2)
--|<=|(s1)≤(s2)|<=|(s1)>(s2)
--
--**Error code**
--
--|**Error code**|**Content**
--|4085H|(s) read address exceeds the device range
--
--**Example**
--
--(((
--(1) LD£ instruction:
--
--(% style="text-align:center" %)
--[[image:07-5 Basic instructions_html_1309199eccc7134.png]]
--)))
--
--When the current value of counter C10 is 200, Y10 is set
--
--When the content of D200 is above -29, and X1 is ON, Y11 is set
--
--(2) AND£ instruction:
--
--(% style="text-align:center" %)
--[[image:07-5 Basic instructions_html_1c966f74b0bd808e.png]]
--
--(((
--When X0 is ON, or when the current value of counter C10 is 200, Y10 is set
--
--When X1 is OFF, and the content of data counter D0 is not -10, Y11 is set
--
--
--)))
--
--(3) OR£ instruction:
--
--(% style="text-align:center" %)
--[[image:07-5 Basic instructions_html_8b000809015ea436.png]]
--
--(((
--When X1 is ON, or when the current value of counter C10 is 200, Y0 is set
--
--When X2 and M30 are ON, or the content of register D100 is K10000 and above, M60 is set
--)))
--
--== **Signed 32-bit contact comparison instruction** ==
--
--**LDD £, ANDD £, ORD £**
--
--The BIN 32-bit data of the device specified in (s1) and the BIN 32-bit data of the device specified in (s2) are compared by normal open contact processing.
--
--LDD£: Normally open contact comparison command
--
--ANDD£: Normally open contact series link comparison instruction
--
--ORD£: Normally open contact parallel link comparison instruction
--
--**Ladder diagram**
--
--(% style="text-align:center" %)
--[[image:07-5 Basic instructions_html_63210db6b7e1512f.png]]
--
--“=”, “<>”, “>”, “<”, “>=”, “<=” can be input in “£”
--
--**Content, range and data type**
--
--|**Parameter**|**Content**|**Range**|**Data type**|**Data type (label)**
--|(s1)|Comparison data or device storing comparison data|-2147483648 to 2147483647|Signed BIN 32 bit|ANY32_S
--|(s2)|Comparison data or device storing comparison data|-2147483648 to 2147483647|Signed BIN 32 bit|ANY32_S
--
--**Device used**
--
--|(% rowspan="2" %)**Instruction**|(% rowspan="2" %)**Parameter**|(% colspan="13" %)**Devices**|(((
--**Offset modification**
--)))|(((
--**Pulse extension**
--)))
--|**KnX**|**KnY**|**KnM**|**KnS**|**T**|**C**|**D**|**R**|**SD**|**LC**|**HSC**|**K**|**H**|**[D]**|**XXP**
--|LDD=|s1, s2|●|●|●|●|●|●|●|●|●|●|●|●|●|●|
--|LDD>|s1, s2|●|●|●|●|●|●|●|●|●|●|●|●|●|●|
--|LDD<|s1, s2|●|●|●|●|●|●|●|●|●|●|●|●|●|●|
--|LDD>=|s1, s2|●|●|●|●|●|●|●|●|●|●|●|●|●|●|
--|LDD<=|s1, s2|●|●|●|●|●|●|●|●|●|●|●|●|●|●|
--|LDD<>|s1, s2|●|●|●|●|●|●|●|●|●|●|●|●|●|●|
--|ANDD=|s1, s2|●|●|●|●|●|●|●|●|●|●|●|●|●|●|
--|ANDD>|s1, s2|●|●|●|●|●|●|●|●|●|●|●|●|●|●|
--|ANDD<|s1, s2|●|●|●|●|●|●|●|●|●|●|●|●|●|●|
--|ANDD>=|s1, s2|●|●|●|●|●|●|●|●|●|●|●|●|●|●|
--|ANDD<=|s1, s2|●|●|●|●|●|●|●|●|●|●|●|●|●|●|
--|ANDD<>|s1, s2|●|●|●|●|●|●|●|●|●|●|●|●|●|●|
--|ORD=|s1, s2|●|●|●|●|●|●|●|●|●|●|●|●|●|●|
--|ORD>|s1, s2|●|●|●|●|●|●|●|●|●|●|●|●|●|●|
--|ORD<|s1, s2|●|●|●|●|●|●|●|●|●|●|●|●|●|●|
--|ORD>=|s1, s2|●|●|●|●|●|●|●|●|●|●|●|●|●|●|
--|ORD<=|s1, s2|●|●|●|●|●|●|●|●|●|●|●|●|●|●|
--|ORD<>|s1, s2|●|●|●|●|●|●|●|●|●|●|●|●|●|●|
--
--**Features**
--
--The BIN 32-bit data of the device specified in (s1) and the BIN 32-bit data of the device specified in (s2) are compared by normal open contact processing.
--
--The comparison operation result of each instruction is shown below.
--
--|**Instruction Sign**|**Condition**|**Comparison operation result**|**Instruction Sign**|**Condition**|**Comparison operation result**
--|==|(s1)=(s2)|(% rowspan="6" %)On state|==|(s1)≠(s2)|(% rowspan="6" %)Non-conduction state
--|<>|(s1)≠(s2)|<>|(s1)=(s2)
--|>|(s1)>(s2)|>|(s1)≤(s2)
--|<|(s1)＜(s2)|<|(s1)≥(s2)
--|>=|(s1)≥(s2)|>=|(s1)＜(s2)
--|<=|(s1)≤(s2)|<=|(s1)>(s2)
--
--**Error code**
--
--|**Error code**|**Content**
--|4085H|(S) read address exceeds the device range
--
--**Example**
--
--(1) LDD£ instruction:
--
--(% style="text-align:center" %)
--[[image:07-5 Basic instructions_html_8acf0d489297c561.png]]
--
--When the data of LC10 is 200000, Y10 is set, otherwise Y10 is reset.
--
--When the 32-bit data composed of D201 and D200 exceeds -5000, and X1 is ON, Y11 is turned ON.
--
--(2) ANDD£ instruction:
--
--(% style="text-align:center" %)
--[[image:07-5 Basic instructions_html_38be93eec0ced6c.png]]
--
--When X0 is ON and the value of LC10 is 200000, Y10 is set, otherwise it is reset.
--
--When X1 is OFF and the 32-bit data composed of D1 and D0 is not equal to K-50000, Y11 is set.
--
--(3) ORD£ instruction:
--
--(% style="text-align:center" %)
--[[image:07-5 Basic instructions_html_8ebfc7b0562cf370.png]]
--
--When X1 is ON, or the data of LC10 is equal to the data of LC10 is equal to 200000, Y0 is set.
--
--When X2 and M30 are set, or the double word data composed of D101 and D100 is greater than or equal to 100000, M60 is set.
--
--== **Single precision real number contact comparison instruction** ==
--
--**LDE £, ANDE £, ORE £**
--
--The single precision real number of the device specified in (s1) and the single precision real number of the device specified in (s2) are compared by normal open contact processing.
--
--LDE£: Normally open contact comparison command
--
--ANDE£: Normally open contact series link comparison instruction
--
--ORE£: Normally open contact parallel link comparison instruction
--
--**Ladder diagram**
--
--(% style="text-align:center" %)
--[[image:07-5 Basic instructions_html_6ac28f30e24ad296.png||height="352" width="550"]]
--
--“=”, “<>”, “>”, “<”, “>=”, “<=” can be input in “£”
--
--**Content, range and data type**
--
--|**Parameter**|**Content**|**Range**|**Data type**|**Data type (label)**
--|(s1)|Comparison data or the device start number storing the comparison data|0, 2^^-126^^ ≤~|(s)~|< 2^^128^^|Single precision real number|ANYREAL_32
--|(s2)|Comparison data or the device start number storing the comparison data|0, 2^^-126^^ ≤~|(s)~|< 2^^128^^|Single precision real number|ANYREAL_32
--
--**Device used**
--
--|(% rowspan="2" %)**Instruction**|(% rowspan="2" %)**Parameter**|(% colspan="8" %)**Devices**|(((
--**Offset modification**
--)))|(((
--**Pulse extension**
--)))
--|**T**|**C**|**D**|**R**|**SD**|**LC**|**HSC**|**E**|**[D]**|**XXP**
--|LDE=|s1, s2|●|●|●|●|●|●|●|●|●|
--|LDE>|s1, s2|●|●|●|●|●|●|●|●|●|
--|LDE<|s1, s2|●|●|●|●|●|●|●|●|●|
--|LDE>=|s1, s2|●|●|●|●|●|●|●|●|●|
--|LDE<=|s1, s2|●|●|●|●|●|●|●|●|●|
--|LDE<>|s1, s2|●|●|●|●|●|●|●|●|●|
--|ANDE=|s1, s2|●|●|●|●|●|●|●|●|●|
--|ANDE>|s1, s2|●|●|●|●|●|●|●|●|●|
--|ANDE<|s1, s2|●|●|●|●|●|●|●|●|●|
--|ANDE>=|s1, s2|●|●|●|●|●|●|●|●|●|
--|ANDE<=|s1, s2|●|●|●|●|●|●|●|●|●|
--|ANDE<>|s1, s2|●|●|●|●|●|●|●|●|●|
--|ORE=|s1, s2|●|●|●|●|●|●|●|●|●|
--|ORD>|s1, s2|●|●|●|●|●|●|●|●|●|
--|ORE<|s1, s2|●|●|●|●|●|●|●|●|●|
--|ORE>=|s1, s2|●|●|●|●|●|●|●|●|●|
--|ORE<=|s1, s2|●|●|●|●|●|●|●|●|●|
--|ORE<>|s1, s2|●|●|●|●|●|●|●|●|●|
--
--**Features**
--
--The single precision real number of the device specified in (s1) and the single precision real number of the device specified in (s2) are compared by normal open contact processing.
--
--The comparison operation result of each instruction is shown below.
--
--|**Instruction Sign**|**Condition**|**Comparison operation result**|**Instruction Sign**|**Condition**|**Comparison operation result**
--|E=|(s1)=(s2)|(% rowspan="6" %)On state|E=|(s1)≠(s2)|(% rowspan="6" %)Non-conduction state
--|E<>|(s1)≠(s2)|E<>|(s1)=(s2)
--|E>|(s1)>(s2)|E>|(s1)≤(s2)
--|E<|(s1)＜(s2)|E<|(s1)≥(s2)
--|E>=|(s1)≥(s2)|E>=|(s1)＜(s2)
--|E<=|(s1)≤(s2)|E<=|(s1)>(s2)
--
--**Error code**
--
--|**Error code**|**Content**
--|4084H|When the content of the specified device by (s1) and (s2) is an irregular number, a non-number, or ±∞
--|4085H|The read address of (s1) and (s2exceeds the device range
--
--**Example**
--
--(1) LDE£ instruction:
--
--(% style="text-align:center" %)
--[[image:07-5 Basic instructions_html_c4c820cf59601493.png]]
--
--When the real number input in D0 is equal to E1.23, Y10 is ON, otherwise Y10 is OFF.
--
--When the real number in R0 is greater than or equal to the real number in LC0, Y11 is ON, otherwise it is OFF.
--
--If the input in D0, R0, LC0 is not a real number, it will report H4084 error.
--
--(2) ANDE£ instruction:
--
--(% style="text-align:center" %)
--[[image:07-5 Basic instructions_html_7cdd2117360e179b.png]]
--
--Only when M0 is ON and D2 real number is not equal to E1.23 and R2 real number is less than real number LC2 , Y12 is ON, otherwise all are OFF.
--
--(3) ORE£ instruction:
--
--(% style="text-align:center" %)
--[[image:07-5 Basic instructions_html_3eba0bd56176441d.png]]
--
--When the real number of R4 is less than or equal to the real number of R15, or the real number R6 is equal to the real number R20, Y13 is ON, otherwise Y13 is OFF.
--
--== **String comparison** ==
--
--**LDS£、ANDS£、 ORS£**
--
--Compare the string stored after the device number specified in (s1) with the string stored after the device number specified in (s2).
--
--LDS£: String comparison instruction
--
--ANDS£: String serial connection comparison instruction
--
--ORS£: String parallel connection comparison instruction
--
--**Ladder diagram**
--
--(% style="text-align:center" %)
--[[image:07-5 Basic instructions_html_5fb3b3b70645fef5.png||height="371" width="550"]]
--
--“=” and “<>” could be entered in “£”
--
--**Content, range and data type**
--
--|**Parameter**|**Content**|**Range**|**Date type**|**Date type(label)**
--|(S1)|Connection data or the device start number storing the data or the string specified directly|-|String|ANYSTRING_SINGLE
--|(S1)|Connection data or the device start number storing the data or the string specified directly|-|String|ANYSTRING_SINGLE
--
--**Device used**
--
--|(% rowspan="2" %)**Instruction**|(% rowspan="2" %)**Parameter**|(% colspan="9" %)**Devices**|(((
--**Offset modification**
--)))|(((
--**Pulse extension**
--)))
--|**KnX**|**KnY**|**KnM**|**KnS**|**T**|**C**|**D**|**R**|**SD**|**[D]**|**XXP**
--|LDS=|s1、s2|●|●|●|●|●|●|●|●|●|●|
--|LDS<>|s1、s2|●|●|●|●|●|●|●|●|●|●|
--|ANDS=|s1、s2|●|●|●|●|●|●|●|●|●|●|
--|ANDS<>|s1、s2|●|●|●|●|●|●|●|●|●|●|
--|ORS=|s1、s2|●|●|●|●|●|●|●|●|●|●|
--|ORS<>|s1、s2|●|●|●|●|●|●|●|●|●|●|
--
--**Features**
--
--• Compare the string stored after the device number specified in (s1) with the string stored after the device number specified in (s2).
--
--• The comparison operation result of each instruction is shown below.
--
--|**Instruction sign**|**Condition**|**Comparison operation result**|**Instruction sign**|**Condition**|**Comparison operation result**
--|==|(s1)＝(s2)|(% rowspan="2" %)On stat|==|(s1)≠(s2)|(% rowspan="2" %)Non-conduction state
--|<>|(s1)≠(s2)|<>|(s1)＝(s2)
--
--**Error code**
--
--|**Error code**|**Content**
--|4085H|The read address of (s1) or (s2) exceeds the device range
--|408AH|The length of the read string of (s1) or (s2) exceeds, and the continuous length of the string exceeds 400 characters.
--|408BH|When (s1) or (s2) reading the string, the maximum range of the device is read but 00H is not found as the end.
--
--**Example**
--
--(1) LDS£ instruction:
--
--(% style="text-align:center" %)
--[[image:07-5 Basic instructions_html_449a071f61ff5b58.png]]
--
--(2) ANDS£ instruction:
--
--(% style="text-align:center" %)
--[[image:07-5 Basic instructions_html_dd6aa995d193bdd2.png]]
--
--(3) ORS£ instruction:
--
--(% style="text-align:center" %)
--[[image:07-5 Basic instructions_html_4f8fb7c94f87c58d.png]]
--
--= **Clock operation instruction** =
--
  == **TADD/The addition of clock data** ==
  **TADD(P)**
@@ -412,35 +412,34 @@
  **Device used**
--|(% rowspan="2" %)**Instruction**|(% rowspan="2" %)**Parameter**|(% colspan="10" %)**Devices**|(((
--**Offset**
--
--**modification**
++|(% rowspan="2" %)**Instruction**|(% rowspan="2" %)**Parameter**|(% colspan="5" %)**Devices**|(((
++**Offset modification**
  )))|(((
--**Pulse**
--
--**extension**
++**Pulse extension**
  )))
--|**T**|**C**|**D**|**R**|**SD**|**LC**|**HSC**|**K**|**H**|**E**|**[D]**|**XXP**
--|(% rowspan="3" %)TADD|Parameter 1|●|●|●|●|●| | | | | |●|●
--|Parameter 2|●|●|●|●|●| | | | | |●|●
--|Parameter 3|●|●|●|●|●| | | | | |●|●
++|**T**|**C**|**D**|**R**|**SD**|**[D]**|**XXP**
++|(% rowspan="3" %)TADD|Parameter 1|●|●|●|●|●|●|●
++|Parameter 2|●|●|●|●|●|●|●
++|Parameter 3|●|●|●|●|●|●|●
  **Features**
  Add the time data specified in (s1) and the time data specified in (s2), and store the result of the addition in the device number specified in (d) or later.
--[[image:07-5 Basic instructions_html_37222a6e282347f9.png]]
++(% style="text-align:center" %)
++[[image:07-5 Basic instructions_html_37222a6e282347f9.png||height="79" width="750"]]
  **Example**
  When 6:32:40 and 7:48:10 are added together
--[[image:07-5 Basic instructions_html_90138670198ab422.png]]
++(% style="text-align:center" %)
++[[image:07-5 Basic instructions_html_90138670198ab422.png||height="94" width="750"]]
  When the calculation result time exceeds 24 o'clock, the carry flag turns ON, and the value after 24 hours is subtracted becomes the calculation result. For example, when 14:20:30 and 20:20:20 are added, the result is not 34:40:50, but 10:40:50.
--[[image:07-5 Basic instructions_html_bac419ce2dc0dc2.png]]
++(% style="text-align:center" %)
++[[image:07-5 Basic instructions_html_bac419ce2dc0dc2.png||height="91" width="750"]]
  When the calculation result is 0 (0 hour, 0 minute, 0 second), the zero flag turns on.
@@ -452,7 +452,7 @@
  |SM151|Carry|It is ON when the result of the TADD(P) instruction exceeds the maximum clock data value of 23:59:59
  |SM153|Zero|It is ON when the result of the TADD(P) instruction is 0:00:00
--✎**Note**
++✎**Note:**
  The devices specified in (s1), (s2), (d) occupy 3 points respectively. Be careful not to overlap with the device used for machine control.
@@ -461,7 +461,7 @@
  **Error code**
  |**Error code**|**Content**
--|4085H|{{id name="OLE_LINK344"/}}When reading the specified device range exceeds the corresponding device range
++|4085H|When reading the specified device range exceeds the corresponding device range
  |4086H|When writing the specified device range exceeds the corresponding device range
  |4084H|(((
  When the values specified in (s1) and (s2) are other than 0 to 23
@@ -471,24 +471,26 @@
  **Example**
--[[image:07-5 Basic instructions_html_4f75eedee7172bbb.png]]
++(% style="text-align:center" %)
++[[image:07-5 Basic instructions_html_4f75eedee7172bbb.png||height="35" width="349"]]
  Set D0 time to 16:30:00 and D10 time to 4:30:0
++(% style="text-align:center" %)
  [[image:07-5 Basic instructions_html_c64e0faf2af172f8.png]]
++(% style="text-align:center" %)
  [[image:07-5 Basic instructions_html_66e3a2eadeb2ecbb.png]]
  After the coil is turned on, the D20 time is 21:0:0
++(% style="text-align:center" %)
  [[image:07-5 Basic instructions_html_a9b235835aa41200.png]]
++== **TSUB/The subtraction of clock data** ==
++**TSUB(P)**
--{{id name="_Toc6604"/}}{{id name="_Toc16422"/}}**TSUB/The subtraction of clock data**
--
--[[image:07-5 Basic instructions_html_11b3991e89e21efc.gif]] **TSUB(P)**
--
  Subtract the time data stored after the device number specified in (s1) and the time data stored after the device number specified in (s2), and store the subtraction result in the device number specified in (d) or later .
  -[TSUB (s1) (s2) (d)]
@@ -514,24 +514,21 @@
  **Device used**
--|(% rowspan="2" %)**Instruction**|(% rowspan="2" %)**Parameter**|(% colspan="24" %)**Devices**|(((
--**Offset**
--
--**modification**
++|(% rowspan="2" %)**Instruction**|(% rowspan="2" %)**Parameter**|(% colspan="5" %)**Devices**|(((
++**Offset modification**
  )))|(((
--**Pulse**
--
--**extension**
++**Pulse extension**
  )))
--|**X**|**Y**|**M**|**S**|**SM**|**T(bit)**|**C(bit)**|**LC(bit)**|**HSC(bit)**|**D.b**|**KnX**|**KnY**|**KnM**|**KnS**|**T**|**C**|**D**|**R**|**SD**|**LC**|**HSC**|**K**|**H**|**E**|**[D]**|**XXP**
--|(% rowspan="3" %)TSUB|Parameter 1| | | | | | | | | | | | | | |●|●|●|●|●| | | | | |●|●
--|Parameter 2| | | | | | | | | | | | | | |●|●|●|●|●| | | | | |●|●
--|Parameter 3| | | | | | | | | | | | | | |●|●|●|●|●| | | | | |●|●
++|**T**|**C**|**D**|**R**|**SD**|**[D]**|**XXP**
++|(% rowspan="3" %)TSUB|Parameter 1|●|●|●|●|●|●|●
++|Parameter 2|●|●|●|●|●|●|●
++|Parameter 3|●|●|●|●|●|●|●
  **Features**
  Subtract the time data specified in (s1) and the time data specified in (s2), and store the subtraction result in the device number specified in (d) or later.
++(% style="text-align:center" %)
  [[image:07-5 Basic instructions_html_5a93455e4cd8a27.png]]
  **Example**
@@ -538,10 +538,12 @@
  When subtracting 10:40:20 and 3:50:10
++(% style="text-align:center" %)
  [[image:07-5 Basic instructions_html_2473f03fc493780c.png]]
  When the calculation result time is a negative number, the borrow flag turns on and the data +24 is the calculation result. For example, in the case of subtracting 4:50:32 and 10:42:12, the result is not -6:8:20, but 18:8:20.
++(% style="text-align:center" %)
  [[image:07-5 Basic instructions_html_24b998b4c3c4ec73.png]]
  When the calculation result is 0 (0 hour, 0 minute, 0 second), the zero flag turns on.
@@ -552,7 +552,7 @@
  |SM152|Borrow|It is ON when the result of the TSUB(P) instruction is less than 0:00:00
  |SM153|Zero|It is ON when the result of the TSUB(P) instruction is at the time of 0:00:00:00
--✎**Note**
++✎**Note:**
  • The devices specified in (s1), (s2), and (d) occupy 3 points respectively. Be careful not to overlap with the device used for machine control.
@@ -571,19 +571,23 @@
  **Example**
--[[image:07-5 Basic instructions_html_e3a5d4793d3ccd2d.png]]
++(% style="text-align:center" %)
++[[image:07-5 Basic instructions_html_e3a5d4793d3ccd2d.png||height="36" width="372"]]
  Set D0 time to 16:30:00 and D10 time to 4:30:0
++(% style="text-align:center" %)
  [[image:07-5 Basic instructions_html_c64e0faf2af172f8.png]]
++(% style="text-align:center" %)
  [[image:07-5 Basic instructions_html_66e3a2eadeb2ecbb.png]]
  After the coil is turned on, the D20 time is 12:00:00
++(% style="text-align:center" %)
  [[image:07-5 Basic instructions_html_8f93ea19ba10652b.png]]
--{{id name="_Toc10358"/}}{{id name="_Toc12073"/}}[[image:07-5 Basic instructions_html_501fb256fd034ca6.gif]] **TRD/Clock data reading**
++**TRD/Clock data reading**
  **TRD(P)**
@@ -602,17 +602,13 @@
  **Device used**
--|(% rowspan="2" %)**Instruction**|(% rowspan="2" %)**Parameter**|(% colspan="24" %)**Devices**|(((
--**Offset**
--
--**modification**
++|(% rowspan="2" %)**Instruction**|(% rowspan="2" %)**Parameter**|(% colspan="4" %)**Devices**|(((
++**Offset modification**
  )))|(((
--**Pulse**
--
--**extension**
++**Pulse extension**
  )))
--|**X**|**Y**|**M**|**S**|**SM**|**T(bit)**|**C(bit)**|**LC(bit)**|**HSC(bit)**|**D.b**|**KnX**|**KnY**|**KnM**|**KnS**|**T**|**C**|**D**|**R**|**SD**|**LC**|**HSC**|**K**|**H**|**E**|**[D]**|**XXP**
--|TRD|Parameter 1| | | | | | | | | | | | | | |●|●|●|●| | | | | | |●|●
++|**T**|**C**|**D**|**R**|**[D]**|**XXP**
++|TRD|Parameter 1|●|●|●|●|●|●
  **Features**
@@ -638,7 +638,7 @@
  |SD105|The year data of the clock data is stored in a 4-digit BIN code of the Gregorian calendar.
  |SD106|The week data of the clock data is stored in BIN code. (0: day, 1: one, ..., 6: six) are stored in BIN code.
--✎**Note**
++✎**Note:**
  • The device specified in (d) occupies 7 points. Be careful not to overlap with the device used for machine control.
@@ -649,15 +649,17 @@
  **Example**
--[[image:07-5 Basic instructions_html_b81c1991fec5b4b1.png]]
++(% style="text-align:center" %)
++[[image:07-5 Basic instructions_html_b81c1991fec5b4b1.png||height="68" width="250"]]
  After the M0 coil is turned on, the current date and time are read as 2020-2-19 13:10:38 Wednesday
--[[image:07-5 Basic instructions_html_fe82ecd18ebfd787.png]]
++(% style="text-align:center" %)
++[[image:07-5 Basic instructions_html_fe82ecd18ebfd787.png||height="48" width="602"]]
--{{id name="_Toc24237"/}}{{id name="_Toc487"/}}**TWR/Clock data writing**
++== **TWR/Clock data writing** ==
--[[image:07-5 Basic instructions_html_11b3991e89e21efc.gif]] **TWR(P)**
++**TWR(P)**
  Write the clock data of the built-in real-time clock of the CPU module.
@@ -670,17 +670,13 @@
  **Device used**
--|(% rowspan="2" %)**Instruction**|(% rowspan="2" %)**Parameter**|(% colspan="24" %)**Devices**|(((
--**Offset**
--
--**modification**
++|(% rowspan="2" %)**Instruction**|(% rowspan="2" %)**Parameter**|(% colspan="4" %)**Devices**|(((
++**Offset modification**
  )))|(((
--**Pulse**
--
--**extension**
++**Pulse extension**
  )))
--|**X**|**Y**|**M**|**S**|**SM**|**T(bit)**|**C(bit)**|**LC(bit)**|**HSC(bit)**|**D.b**|**KnX**|**KnY**|**KnM**|**KnS**|**T**|**C**|**D**|**R**|**SD**|**LC**|**HSC**|**K**|**H**|**E**|**[D]**|**XXP**
--|TWR|Parameter 1| | | | | | | | | | | | | | |●|●|●|●| | | | | | |●|●
++|**T**|**C**|**D**|**R**|**[D]**|**XXP**
++|TWR|Parameter 1|●|●|●|●|●|●
  **Features**
@@ -715,7 +715,7 @@
  |SD105|The year data of the clock data is stored in a 4-digit BIN code of the Gregorian calendar.
  |SD106|The week data of the clock data is stored in BIN code. (0: day, 1: one, ..., 6: six) are stored in BIN code.
--✎**Note**
++✎**Note:**
  The device specified in (s) occupies 7 points. Be careful not to overlap with the device used for machine control.
@@ -728,13 +728,15 @@
  Set D0 date and time to 2020-2-19 12:36:00 in advance
--[[image:07-5 Basic instructions_html_994c66d1a4cbd45f.png]]
++(% style="text-align:center" %)
++[[image:07-5 Basic instructions_html_994c66d1a4cbd45f.png||height="57" width="305"]]
  At the moment when the time 12:36:00 arrives, turn on the M0 coil and write the time.
--[[image:07-5 Basic instructions_html_bf3e906ee5265598.png]]
++(% style="text-align:center" %)
++[[image:07-5 Basic instructions_html_bf3e906ee5265598.png||height="42" width="586"]]
--{{id name="_Toc5357"/}}{{id name="_Toc6196"/}}[[image:07-5 Basic instructions_html_11b3991e89e21efc.gif]] **HTOS/16-bit data conversion of time data (hour, minute, second → second)**
++== **HTOS/16-bit data conversion of time data (hour, minute, second → second)** ==
  **HTOS(P)**
@@ -750,26 +750,26 @@
  **Device used**
--|(% rowspan="2" %)**Instruction**|(% rowspan="2" %)**Parameter**|(% colspan="24" %)**Devices**|**Offset modification**|(((
--**Pulse**
--
--**extension**
++|(% rowspan="2" %)**Instruction**|(% rowspan="2" %)**Parameter**|(% colspan="9" %)**Devices**|**Offset modification**|(((
++**Pulse extension**
  )))
--|**X**|**Y**|**M**|**S**|**SM**|**T(bit)**|**C(bit)**|**LC(bit)**|**HSC(bit)**|**D.b**|**KnX**|**KnY**|**KnM**|**KnS**|**T**|**C**|**D**|**R**|**SD**|**LC**|**HSC**|**K**|**H**|**E**|**[D]**|**XXP**
--|(% rowspan="2" %)HTOS|Parameter 1| | | | | | | | | | |●|●|●|●|●|●|●|●|●| | | | | |●|●
--|Parameter 2| | | | | | | | | | | |●|●|●|●|●|●|●|●| | | | | |●|●
++|**KnX**|**KnY**|**KnM**|**KnS**|**T**|**C**|**D**|**R**|**SD**|**[D]**|**XXP**
++|(% rowspan="2" %)HTOS|Parameter 1|●|●|●|●|●|●|●|●|●|●|●
++|Parameter 2| |●|●|●|●|●|●|●|●|●|●
  **Features**
  Convert the time data stored after the device number specified in (s) into seconds and store the conversion result in the device specified in (d).
--[[image:07-5 Basic instructions_html_a84b7741fd5bef2f.png]]
++(% style="text-align:center" %)
++[[image:07-5 Basic instructions_html_a84b7741fd5bef2f.png||height="130" width="550"]]
  **Example**
  When 4 hours, 29 minutes and 31 seconds are specified in (s)
--[[image:07-5 Basic instructions_html_5effb7bc9b8e5cf7.png]]
++(% style="text-align:center" %)
++[[image:07-5 Basic instructions_html_5effb7bc9b8e5cf7.png||height="162" width="550"]]
  **Error code**
@@ -777,7 +777,7 @@
  |4085H|When reading the specified device range exceeds the corresponding device range
  |4086H|When writing the specified device range exceeds the corresponding device range
  |4084H|(((
--{{id name="OLE_LINK348"/}}When the calculation result is not in the range of 0 to 32767
++When the calculation result is not in the range of 0 to 32767
  When the value specified in (s) is not in the range of 0 to 9
@@ -786,19 +786,22 @@
  **Example**
--[[image:07-5 Basic instructions_html_e23e38c4ba4c34bb.png]]
++(% style="text-align:center" %)
++[[image:07-5 Basic instructions_html_e23e38c4ba4c34bb.png||height="43" width="338"]]
  D0 time is set to 5:36:53
++(% style="text-align:center" %)
  [[image:07-5 Basic instructions_html_2866a121e5ca5713.png]]
  The time of D10 after the M0 coil is turned on is as below.
++(% style="text-align:center" %)
  [[image:07-5 Basic instructions_html_1dd6c5de05890797.png]]
--{{id name="_Toc13431"/}}{{id name="_Toc5278"/}}**DHTOS/32-bit data conversion of time data (hour, minute, second → second)**
++== **DHTOS/32-bit data conversion of time data (hour, minute, second → second)** ==
--[[image:07-5 Basic instructions_html_11b3991e89e21efc.gif]] **DHTOS(P)**
++**DHTOS(P)**
  Convert the time data stored after the device number specified in (s) into seconds and store the conversion result as BIN 32-bit data in the device specified in (d).
@@ -812,30 +812,28 @@
  **Device used**
--|(% rowspan="2" %)**Instruction**|(% rowspan="2" %)**Parameter**|(% colspan="24" %)**Devices**|(((
--**Offset**
--
--**modification**
++|(% rowspan="2" %)**Instruction**|(% rowspan="2" %)**Parameter**|(% colspan="9" %)**Devices**|(((
++**Offset modification**
  )))|(((
--**Pulse**
--
--**extension**
++**Pulse extension**
  )))
--|**X**|**Y**|**M**|**S**|**SM**|**T(bit)**|**C(bit)**|**LC(bit)**|**HSC(bit)**|**D.b**|**KnX**|**KnY**|**KnM**|**KnS**|**T**|**C**|**D**|**R**|**SD**|**LC**|**HSC**|**K**|**H**|**E**|**[D]**|**XXP**
--|(% rowspan="2" %)DHTOS|Parameter 1| | | | | | | | | | |●|●|●|●|●|●|●|●|●| | | | | |●|●
--|Parameter 2| | | | | | | | | | | |●|●|●|●|●|●|●|●| | | | | |●|●
++|**KnX**|**KnY**|**KnM**|**KnS**|**T**|**C**|**D**|**R**|**SD**|**[D]**|**XXP**
++|(% rowspan="2" %)DHTOS|Parameter 1|●|●|●|●|●|●|●|●|●|●|●
++|Parameter 2| |●|●|●|●|●|●|●|●|●|●
  **Features**
  Convert the time data stored after the device number specified in (s) into seconds and store the conversion result in the device specified in (d).
--[[image:07-5 Basic instructions_html_f4be08508575ea01.png]]
++(% style="text-align:center" %)
++[[image:07-5 Basic instructions_html_f4be08508575ea01.png||height="99" width="550"]]
  **Example**
  When 35 hours, 10 minutes and 58 seconds are specified in (s)
--[[image:07-5 Basic instructions_html_5b9ad230ed5e1fd0.png]]
++(% style="text-align:center" %)
++[[image:07-5 Basic instructions_html_5b9ad230ed5e1fd0.png||height="125" width="550"]]
  **Error code**
@@ -850,17 +850,20 @@
  **Example**
--[[image:07-5 Basic instructions_html_ae8ab4379e8bdb91.png]]
++(% style="text-align:center" %)
++[[image:07-5 Basic instructions_html_ae8ab4379e8bdb91.png||height="45" width="263"]]
  D0 time is set to 15:33:24
--[[image:07-5 Basic instructions_html_57a15d9e1045e93e.png]]
++(% style="text-align:center" %)
++[[image:07-5 Basic instructions_html_57a15d9e1045e93e.png||height="41" width="313"]]
  The second of D10 after the M0 coil is turned on is
--[[image:07-5 Basic instructions_html_194e906b1dc12078.png]]
++(% style="text-align:center" %)
++[[image:07-5 Basic instructions_html_194e906b1dc12078.png||height="64" width="365"]]
--{{id name="_Ref22686"/}}{{id name="_Toc11231"/}}{{id name="_Toc7401"/}}[[image:07-5 Basic instructions_html_11b3991e89e21efc.gif]] **HOUR/Hour measuring 16-bit**
++**HOUR/Hour measuring 16-bit**
  **HOUR(P)**
@@ -885,19 +885,15 @@
  **Device used**
--|(% rowspan="2" %)**Instruction**|(% rowspan="2" %)**Parameter**|(% colspan="24" %)**Devices**|(((
--**Offset**
--
--**modification**
++|(% rowspan="2" %)**Instruction**|(% rowspan="2" %)**Parameter**|(% colspan="17" %)**Devices**|(((
++**Offset modification**
  )))|(((
--**Pulse**
--
--**extension**
++**Pulse extension**
  )))
--|**X**|**Y**|**M**|**S**|**SM**|**T(bit)**|**C(bit)**|**LC(bit)**|**HSC(bit)**|**D.b**|**KnX**|**KnY**|**KnM**|**KnS**|**T**|**C**|**D**|**R**|**SD**|**LC**|**HSC**|**K**|**H**|**E**|**[D]**|**XXP**
--|(% rowspan="3" %)HOUR|Parameter 1| | | | | | | | | | |●|●|●|●|●|●|●|●|●| | |●|●| |●|●
--|Parameter 2| | | | | | | | | | | | | | | | |●|●|●| | | | | |●|●
--|Parameter 3| |●|●|●|●| | | | |●| | | | | | | | | | | | | | |●|●
++|**Y**|**M**|**S**|**SM**|**D.b**|**KnX**|**KnY**|**KnM**|**KnS**|**T**|**C**|**D**|**R**|**SD**|**K**|**H**|**E**|**[D]**|**XXP**
++|(% rowspan="3" %)HOUR|Parameter 1| | | | | |●|●|●|●|●|●|●|●|●|●|●| |●|●
++|Parameter 2| | | | | | | | | | | |●|●|●| | | |●|●
++|Parameter 3|●|●|●|●|●| | | | | | | | | | | | |●|●
  **Features**
@@ -919,7 +919,7 @@
  • The measurement stops when the current value reaches the 16-bit maximum. To continue the measurement, clear the current value of (d1) to (d1)+1.
--✎**Note**
++✎**Note:**
  • The device specified in (d1) occupies 2 points. Be careful not to overlap with the device used for machine control.
@@ -932,15 +932,14 @@
  |4086H|When writing the specified device range exceeds the corresponding device range
  |4084H|When the value of (s) is negative
--
--
  **Example**
--[[image:07-5 Basic instructions_html_7570f8c392470a9f.png]]
++(% style="text-align:center" %)
++[[image:07-5 Basic instructions_html_7570f8c392470a9f.png||height="45" width="320"]]
  When M0 = ON, the duration of the state is accumulated, the time is recorded in D0, and the seconds less than 1 hour are recorded in D1. When the accumulated time of D0 reaches 98 hours, the Y0 output state is ON. When the timing conditions are met, after reaching the specified value (K98), the accumulated timing will continue and the reading will continue to increase; the current time value D0 reaches the maximum value of 32767 hours and D1 reaches 3599 seconds, the timing measurement will stop. The current time values D0 and D1 are cleared to 0.
--{{id name="_Toc8523"/}}{{id name="_Toc9364"/}}[[image:07-5 Basic instructions_html_11b3991e89e21efc.gif]] **DHOUR/Hour measuring 32 bits**
++== **DHOUR/Hour measuring 32 bits** ==
  **DHOUR(P)**
@@ -952,9 +952,7 @@
  |**Parameter**|**Content**|**Range**|**Data type**|**Data type (label)**
  |(s)|(((
--The time when the alarm (d2) is turned ON
--
--(set by one hour)
++The time when the alarm (d2) is turned ON (set by one hour)
  )))|0 to 2147483647|Signed BIN 32 bit|ANY32
  |(d1)|Device that stores the current value of measurement (specified data register for power failure retention)|-|Unsigned BIN 32 bit|(((
  ANY32_ARRAY
@@ -965,19 +965,15 @@
  **Device used**
--|(% rowspan="2" %)**Instruction**|(% rowspan="2" %)**Parameter**|(% colspan="24" %)**Devices**|(((
--**Offset**
--
--**modification**
++|(% rowspan="2" %)**Instruction**|(% rowspan="2" %)**Parameter**|(% colspan="18" %)**Devices**|(((
++**Offset modification**
  )))|(((
--**Pulse**
--
--**extension**
++**Pulse extension**
  )))
--|**X**|**Y**|**M**|**S**|**SM**|**T(bit)**|**C(bit)**|**LC(bit)**|**HSC(bit)**|**D.b**|**KnX**|**KnY**|**KnM**|**KnS**|**T**|**C**|**D**|**R**|**SD**|**LC**|**HSC**|**K**|**H**|**E**|**[D]**|**XXP**
--|(% rowspan="3" %)DHOUR|Parameter 1| | | | | | | | | | |●|●|●|●|●|●|●|●|●|●|●|●|●| |●|●
--|Parameter 2| | | | | | | | | | | | | | | | |●|●|●| | | | | |●|●
--|Parameter 3| |●|●|●|●| | | | |●| | | | | | | | | | | | | | |●|●
++|**Y**|**M**|**S**|**SM**|**D.b**|**KnX**|**KnY**|**KnM**|**KnS**|**T**|**C**|**D**|**R**|**SD**|**LC**|**HSC**|**K**|**H**|**[D]**|**XXP**
++|(% rowspan="3" %)DHOUR|Parameter 1| | | | | |●|●|●|●|●|●|●|●|●|●|●|●|●|●|●
++|Parameter 2| | | | | | | | | | | |●|●|●| | | | |●|●
++|Parameter 3|●|●|●|●|●| | | | | | | | | | | | | |●|●
  **Features**
@@ -999,7 +999,7 @@
  • The measurement stops when the current value reaches the 32-bit maximum. To continue the measurement, clear the current value of (d1) to (d1)+2.
--✎**Note**
++✎**Note:**
  • The device specified in (d1) occupies 3 points. Be careful not to overlap with the device used for machine control.
@@ -1012,17 +1012,16 @@
  |4086H|When writing the specified device range exceeds the corresponding device range
  |4084H|When the value of (s) is negative
--
--
  **Example**
--[[image:07-5 Basic instructions_html_3f1ef5ecc835de30.png]]
++(% style="text-align:center" %)
++[[image:07-5 Basic instructions_html_3f1ef5ecc835de30.png||height="43" width="448"]]
  When M0=ON, the duration of this state is accumulated, the time is recorded in D1, D0, and the seconds less than 1 hour are recorded in D2. When the accumulated time of D1, D0 reaches 1000 hours, the Y0 output state is ON. When the timing conditions are met, after reaching the specified value (K1000), the accumulated timing will continue, and the reading will continue to increase; the current time values D1 and D0 reach the maximum value of 2147483647 hours, and when D2 reaches 3599 seconds, the timing measurement will stop and the timing should be restarted. The current time values D0, D1, and D2 must be cleared to 0.
--**{{id name="_Toc11629"/}}STOH/16-bit data conversion of time data (second → hour, minute, second)**
++== **STOH/16-bit data conversion of time data (second → hour, minute, second)** ==
--[[image:07-5 Basic instructions_html_11b3991e89e21efc.gif]] **STOH(P)**
++**STOH(P)**
  Convert the second 16-bit data stored in the device number specified in (s) into hour, minute, and second, and store the conversion result in the device specified in (d) and later.
@@ -1031,39 +1031,35 @@
  **Content, range and data type**
  |**Parameter**|**Content**|**Range**|**Data type**|**Data type (label)**
--|(s)|{{id name="OLE_LINK353"/}}The device start number that stores the clock data before conversion|0 to 32767|Signed BIN 16 bit|ANY16
++|(s)|The device start number that stores the clock data before conversion|0 to 32767|Signed BIN 16 bit|ANY16
  |(d)|The device start number that stores the converted clock data|-|Signed BIN 16 bit|(((
--ANY16_ARRAY
--
--(number of elements: 3)
++ANY16_ARRAY (number of elements: 3)
  )))
  **Device used**
--|(% rowspan="2" %)**Instruction**|(% rowspan="2" %)**Parameter**|(% colspan="24" %)**Devices**|(((
--**Offset**
--
--**modification**
++|(% rowspan="2" %)**Instruction**|(% rowspan="2" %)**Parameter**|(% colspan="9" %)**Devices**|(((
++**Offset modification**
  )))|(((
--**Pulse**
--
--**extension**
++**Pulse extension**
  )))
--|**X**|**Y**|**M**|**S**|**SM**|**T(bit)**|**C(bit)**|**LC(bit)**|**HSC(bit)**|**D.b**|**KnX**|**KnY**|**KnM**|**KnS**|**T**|**C**|**D**|**R**|**SD**|**LC**|**HSC**|**K**|**H**|**E**|**[D]**|**XXP**
--|(% rowspan="2" %)STOH|Parameter 1| | | | | | | | | | |●|●|●|●|●|●|●|●|●| | | | | |●|●
--|Parameter 2| | | | | | | | | | | |●|●|●|●|●|●|●|●| | | | | |●|●
++|**KnX**|**KnY**|**KnM**|**KnS**|**T**|**C**|**D**|**R**|**SD**|**[D]**|**XXP**
++|(% rowspan="2" %)STOH|Parameter 1|●|●|●|●|●|●|●|●|●|●|●
++|Parameter 2| |●|●|●|●|●|●|●|●|●|●
  **Features**
  Convert the second data stored after the device number specified in (s) into hour, minute, and second, and store the conversion result in the device specified in (d) and later.
--[[image:07-5 Basic instructions_html_1f5f3f1d80af2a34.png]]
++(% style="text-align:center" %)
++[[image:07-5 Basic instructions_html_1f5f3f1d80af2a34.png||height="110" width="550"]]
  **Example**
  When 29,011 seconds are specified in (s)
--[[image:07-5 Basic instructions_html_682516cbf773f515.png]]
++(% style="text-align:center" %)
++[[image:07-5 Basic instructions_html_682516cbf773f515.png||height="163" width="550"]]
  **Error code**
@@ -1074,17 +1074,19 @@
  **Example**
--[[image:07-5 Basic instructions_html_e783349d57adf7d2.png]]
++(% style="text-align:center" %)
++[[image:07-5 Basic instructions_html_e783349d57adf7d2.png||height="47" width="350"]]
  Set D0 seconds to 12537
  The hour, minute and second of D10 after the M0 coil is turned on are
--[[image:07-5 Basic instructions_html_d3c33949e8684891.png]]
++(% style="text-align:center" %)
++[[image:07-5 Basic instructions_html_d3c33949e8684891.png||height="52" width="645"]]
--{{id name="_Toc10764"/}}{{id name="_Toc30243"/}}**DSTOH/32-bit data conversion of time data (second → hour, minute, second)**
++== **DSTOH/32-bit data conversion of time data (second → hour, minute, second)** ==
--[[image:07-5 Basic instructions_html_11b3991e89e21efc.gif]] **DSTOH(P)**
++**DSTOH(P)**
  Convert the second 32-bit data of second stored in the device number specified in (s) into hour, minute, and second, and store the conversion result in the device specified in (d) and later.
@@ -1095,37 +1095,33 @@
  |**Parameter**|**Content**|**Range**|**Data type**|**Data &nbsp;&nbsp;&nbsp;&nbsp;type (label)**
  |(s)|The device start number that stores the clock data before conversion|0 to 117964799|Signed BIN 32 bit|ANY32
  |(d)|The device start number that stores the converted clock data|-|Signed BIN 16 bit|(((
--ANY16_ARRAY
--
--(number of elements: 3)
++ANY16_ARRAY (number of elements: 3)
  )))
  **Device used**
--|(% rowspan="2" %)**Instruction**|(% rowspan="2" %)**Parameter**|(% colspan="24" %)**Devices**|(((
--**Offset**
--
--**modification**
++|(% rowspan="2" %)**Instruction**|(% rowspan="2" %)**Parameter**|(% colspan="9" %)**Devices**|(((
++**Offset modification**
  )))|(((
--**Pulse**
--
--**extension**
++**Pulse extension**
  )))
--|**X**|**Y**|**M**|**S**|**SM**|**T(bit)**|**C(bit)**|**LC(bit)**|**HSC(bit)**|**D.b**|**KnX**|**KnY**|**KnM**|**KnS**|**T**|**C**|**D**|**R**|**SD**|**LC**|**HSC**|**K**|**H**|**E**|**[D]**|**XXP**
--|(% rowspan="2" %)DSTOH|Parameter 1| | | | | | | | | | |●|●|●|●|●|●|●|●|●| | | | | |●|●
--|Parameter 2| | | | | | | | | | | |●|●|●|●|●|●|●|●| | | | | |●|●
++|**KnX**|**KnY**|**KnM**|**KnS**|**T**|**C**|**D**|**R**|**SD**|**[D]**|**XXP**
++|(% rowspan="2" %)DSTOH|Parameter 1|●|●|●|●|●|●|●|●|●|●|●
++|Parameter 2| |●|●|●|●|●|●|●|●|●|●
  **Features**
  Convert the second data stored after the device number specified in (s) into hour, minute, and second, and store the conversion result in the device specified in (d) and later.
--[[image:07-5 Basic instructions_html_cbf13fc3d10fbe61.png]]
++(% style="text-align:center" %)
++[[image:07-5 Basic instructions_html_cbf13fc3d10fbe61.png||height="99" width="600"]]
  **Example**
  When 45,325 seconds is specified in (s)
--[[image:07-5 Basic instructions_html_d6045506b13275a0.png]]
++(% style="text-align:center" %)
++[[image:07-5 Basic instructions_html_d6045506b13275a0.png||height="135" width="600"]]
  **Error code**
@@ -1136,15 +1136,17 @@
  **Example**
--[[image:07-5 Basic instructions_html_e7dd49d953db6da4.png]]
++(% style="text-align:center" %)
++[[image:07-5 Basic instructions_html_e7dd49d953db6da4.png||height="39" width="316"]]
  Set D0 seconds to 2152537
  The hour, minute and second of D10 after the M0 coil is turned on are
--[[image:07-5 Basic instructions_html_10d57bde1ac0a218.png]]
++(% style="text-align:center" %)
++[[image:07-5 Basic instructions_html_10d57bde1ac0a218.png||height="52" width="661"]]
--{{id name="_Toc2937"/}}{{id name="_Toc24209"/}}[[image:07-5 Basic instructions_html_11b3991e89e21efc.gif]] **TCMP/Clock data comparison**
++== **TCMP/Clock data comparison** ==
  **TCMP(P)**
@@ -1163,29 +1163,26 @@
  **Device used**
--|(% rowspan="2" %)**Instruction**|(% rowspan="2" %)**Parameter**|(% colspan="24" %)**Devices**|(((
--**Offset**
--
--**modification**
++|(% rowspan="2" %)**Instruction**|(% rowspan="2" %)**Parameter**|(% colspan="17" %)**Devices**|(((
++**Offset modification**
  )))|(((
--**Pulse**
--
--**extension**
++**Pulse extension**
  )))
--|**X**|**Y**|**M**|**S**|**SM**|**T(bit)**|**C(bit)**|**LC(bit)**|**HSC(bit)**|**D.b**|**KnX**|**KnY**|**KnM**|**KnS**|**T**|**C**|**D**|**R**|**SD**|**LC**|**HSC**|**K**|**H**|**E**|**[D]**|**XXP**
--|(% rowspan="5" %)TCMP|Parameter 1| | | | | | | | | | |●|●|●|●|●|●|●|●|●| | |●|●| |●|●
--|Parameter 2| | | | | | | | | | |●|●|●|●|●|●|●|●|●| | |●|●| |●|●
--|Parameter 3| | | | | | | | | | |●|●|●|●|●|●|●|●|●| | |●|●| |●|●
--|Parameter 4| | | | | | | | | | | | | | |●|●|●|●|●| | | | | |●|●
--|Parameter 5| |●|●|●|●| | | | |●| | | | | | | | | | | | | | |●|●
++|**Y**|**M**|**S**|**SM**|**D.b**|**KnX**|**KnY**|**KnM**|**KnS**|**T**|**C**|**D**|**R**|**SD**|**K**|**H**|**E**|**[D]**|**XXP**
++|(% rowspan="5" %)TCMP|Parameter 1| | | | | |●|●|●|●|●|●|●|●|●|●|●| |●|●
++|Parameter 2| | | | | |●|●|●|●|●|●|●|●|●|●|●| |●|●
++|Parameter 3| | | | | |●|●|●|●|●|●|●|●|●|●|●| |●|●
++|Parameter 4| | | | | | | | | |●|●|●|●|●| | | |●|●
++|Parameter 5|●|●|●|●|●| | | | | | | | | | | | |●|●
  **Features**
  Compare the time of the reference time (hour, minute, second) [(s1), (s2), (s3)] with the time data (hour, minute, second) [(s4), (s4)+1, (s4) +2] Compare the size and turn on/off the 3 points from (d) according to the result of the same size.
--[[image:07-5 Basic instructions_html_5df7ad3057fada12.png]]
++(% style="text-align:center" %)
++[[image:07-5 Basic instructions_html_5df7ad3057fada12.png||height="385" width="750"]]
--✎**Note**
++✎**Note:**
  The device specified in (s4) and (d) occupies 3 points. Be careful not to overlap with the device used for machine control.
@@ -1199,26 +1199,29 @@
  |4084H|(((
  When the value specified in (s) and (s4) is not in the range of 0 to 23
--{{id name="OLE_LINK355"/}}When the value specified in (s2),(s3) (s4)+1 and (s4)+2 is not in the range of 0 to 59
++When the value specified in (s2),(s3) (s4)+1 and (s4)+2 is not in the range of 0 to 59
  )))
  **Example**
--[[image:07-5 Basic instructions_html_fcc16317cf7c0700.png]]
++(% style="text-align:center" %)
++[[image:07-5 Basic instructions_html_fcc16317cf7c0700.png||height="68" width="359"]]
  Set D10 to 1, D11 to 30, D12 to 0
  When M0 is turned on, the time that D23 will come is 0:31:27
--[[image:07-5 Basic instructions_html_de97dd7a612b2323.png]]
++(% style="text-align:center" %)
++[[image:07-5 Basic instructions_html_de97dd7a612b2323.png||height="50" width="653"]]
  M10 is turned ON
--[[image:07-5 Basic instructions_html_56e2d606adc09fd.png]]
++(% style="text-align:center" %)
++[[image:07-5 Basic instructions_html_56e2d606adc09fd.png||height="52" width="239"]]
--{{id name="_Toc29031"/}}{{id name="_Toc22923"/}}**TZCP/Clock data bandwidth comparison**
++== **TZCP/Clock data bandwidth comparison** ==
--[[image:07-5 Basic instructions_html_11b3991e89e21efc.gif]] **TZCP(P)**
++**TZCP(P)**
  Compare the comparison time of the high and low points specified in (s1) and (s2) with the time data specified in (s3), and turn the bit device specified in (d) ON/OFF according to its size and bandwidth.
@@ -1228,46 +1228,37 @@
  |**Parameter**|**Content**|**Range**|**Data type**|**Data type (label)**
  |(s1)|Specify the "hour" of the lower limit time (hour, minute, second)|-|Signed BIN 16 bit|(((
--ANY16_ARRAY
--
--(number of elements: 3)
++ANY16_ARRAY (number of elements: 3)
  )))
  |(s2)|Specify the "hour" of the lower limit time (hour, minute, second)|-|Signed BIN 16 bit|(((
--ANY16_ARRAY
--
--(number of elements: 3)
++ANY16_ARRAY (number of elements: 3)
  )))
  |(s3)|Specify "hour" of time data (hour, minute, second)|-|Signed BIN 16 bit|(((
--ANY16_ARRAY
--
--(number of elements: 3)
++ANY16_ARRAY (number of elements: 3)
  )))
  |(d)|The bit device is turned ON/OFF according to the comparison result.|-|Bit|(((
--ANY16_ARRAY
--
--(number of elements: 3)
++ANY16_ARRAY (number of elements: 3)
  )))
  **Device used**
--|(% rowspan="2" %)**Instruction**|(% rowspan="2" %)**Parameter**|(% colspan="24" %)**Devices**|**Offset modification**|(((
--**Pulse**
--
--**extension**
++|(% rowspan="2" %)**Instruction**|(% rowspan="2" %)**Parameter**|(% colspan="10" %)**Devices**|**Offset modification**|(((
++**Pulse extension**
  )))
--|**X**|**Y**|**M**|**S**|**SM**|**T(bit)**|**C(bit)**|**LC(bit)**|**HSC(bit)**|**D.b**|**KnX**|**KnY**|**KnM**|**KnS**|**T**|**C**|**D**|**R**|**SD**|**LC**|**HSC**|**K**|**H**|**E**|**[D]**|**XXP**
--|(% rowspan="4" %)TZCP|Parameter 1| | | | | | | | | | | | | | |●|●|●|●|●| | | | | |●|●
--|Parameter 2| | | | | | | | | | | | | | |●|●|●|●|●| | | | | |●|●
--|Parameter 3| | | | | | | | | | | | | | |●|●|●|●|●| | | | | |●|●
--|Parameter 4| |●|●|●|●| | | | |●| | | | | | | | | | | | | | |●|●
++|**Y**|**M**|**S**|**SM**|**D.b**|**T**|**C**|**D**|**R**|**SD**|**[D]**|**XXP**
++|(% rowspan="4" %)TZCP|Parameter 1| | | | | |●|●|●|●|●|●|●
++|Parameter 2| | | | | |●|●|●|●|●|●|●
++|Parameter 3| | | | | |●|●|●|●|●|●|●
++|Parameter 4|●|●|●|●|●| | | | | |●|●
  **Features**
  Compare the comparison time of the high and low points specified in (s1) and (s2) with the time data specified in (s3), and turn the bit device specified in (d) ON/OFF according to its size and bandwidth.
--[[image:07-5 Basic instructions_html_844291270080313d.png]]
++(% style="text-align:center" %)
++[[image:07-5 Basic instructions_html_844291270080313d.png||height="339" width="750"]]
--✎**Note**
++✎**Note:**
  • The devices specified in (s1), (s2), (s3), (d) occupy 3 points. Be careful not to overlap with the device used for machine control.
@@ -1288,1176 +1288,23 @@
  **Example**
--[[image:07-5 Basic instructions_html_30027a2387c26c2e.png]]
++(% style="text-align:center" %)
++[[image:07-5 Basic instructions_html_30027a2387c26c2e.png||height="46" width="439"]]
  Set D0 time to 16:30:00 and D10 time to 4:30:0
--[[image:07-5 Basic instructions_html_c64e0faf2af172f8.png]]
++(% style="text-align:center" %)
++[[image:07-5 Basic instructions_html_c64e0faf2af172f8.png||height="49" width="626"]]
--[[image:07-5 Basic instructions_html_66e3a2eadeb2ecbb.png]]
++(% style="text-align:center" %)
++[[image:07-5 Basic instructions_html_66e3a2eadeb2ecbb.png||height="50" width="625"]]
  After the coil is turned on, the reading time to D20 time is 8:30:00
--[[image:07-5 Basic instructions_html_75c44dad07eaf80a.png]]
++(% style="text-align:center" %)
++[[image:07-5 Basic instructions_html_75c44dad07eaf80a.png||height="49" width="625"]]
  M0/M12 is ON
--[[image:07-5 Basic instructions_html_f512f36261705953.png]]
--
--{{id name="_Toc6129"/}}[[image:07-5 Basic instructions_html_a2e3294e01b2f206.gif]] **7.13 Data control instructions**
--
--{{id name="_Toc3339"/}}{{id name="_Toc27829"/}}{{id name="_Toc9204"/}}**BAND/BIN 16-bit data dead zone control**
--
--[[image:07-5 Basic instructions_html_11b3991e89e21efc.gif]] **BAND(P)**
--
--The input value (BIN 16-bit value) specified in (s3) controls the output value stored in the device specified in (d) according to the upper and lower limits of the dead zone specified in (s1) and (s2).
--
---[BAND (s1) (s2) (S3) (d)]
--
--**Content, range and data type**
--
--|**Parameter**|**Content**|**Range**|**Data type**|**Data type (label)**
--|(s1)|Lower limit of dead zone (no output zone)|-32,768 to +32,767|Signed BIN 16 bit|ANY16_S
--|(s2)|Upper limit of dead zone (no output zone)|-32,768 to +32,767|Signed BIN 16 bit|ANY16_S
--|(S3)|Input value controlled by dead zone control|-32768 to +32,767|Signed BIN 16 bit|ANY16_S
--|(D)|The start number of the device that stores the output value controlled by the dead zone control|-|Signed BIN 16 bit|ANY16_S
--
--**Device used**
--
--|(% rowspan="2" %)**Instruction**|(% rowspan="2" %)**Parameter**|(% colspan="24" %)**Devices**|(((
--**Offset**
--
--**modification**
--)))|(((
--**Pulse**
--
--**extension**
--)))
--|**X**|**Y**|**M**|**S**|**SM**|**T(bit)**|**C(bit)**|**LC(bit)**|**HSC(bit)**|**D.b**|**KnX**|**KnY**|**KnM**|**KnS**|**T**|**C**|**D**|**R**|**SD**|**LC**|**HSC**|**K**|**H**|**E**|**[D]**|**XXP**
--|(% rowspan="4" %)BAND|Parameter 1| | | | | | | | | | |●|●|●|●|●|●|●|●|●| | |●|●| |●|●
--|Parameter 2| | | | | | | | | | |●|●|●|●|●|●|●|●|●| | |●|●| |●|●
--|Parameter 3| | | | | | | | | | |●|●|●|●|●|●|●|●|●| | | | | |●|●
--|Parameter 4| | | | | | | | | | | |●|●|●|●|●|●|●|●| | | | | |●|●
--
--**Features**
--
--The input value (BIN 16-bit value) specified in (s3) controls the output value stored in the device specified in (d) according to the upper and lower limits of the dead zone specified in (s1) and (s2). The output value is controlled as follows.
--
--|**Condition**|**The value stored in the output value**
--|When dead zone low limit (s1)> input value (s3)|Input value (s3)-Dead zone low limit (s1)
--|When dead zone high limit (s1) <input value (s3)|Input value (s3)- Dead zone high limit (s2)
--|When dead zone low limit (s1) ≤ input value (s3) ≤ dead zone low limit (s2)|0
--
--
--(((
--•When the output value stored in (d) is a signed BIN 16-bit value, and the operation result exceeds the range of -32768 to 32767, the situation is shown in the following example.
--
--For example, when (s1) is 10 and (s3) is -32768,
--
--the output value = -32768-10=8000H-000AH=7FFFH=32758.
--
--[[image:07-5 Basic instructions_html_6850e21a76b813c0.png]]
--)))
--
--**Error code**
--
--|**Error code**|**Content**
--|4085H|When the specified device range for reading exceeds the range of the corresponding device.
--|4086H|When the specified device range for writing exceeds the range of the corresponding device.
--|4084H|When the low limit specified in (s1) is greater than the high limit specified in (s2).
--
--**Example &nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;**
--
--[[image:07-5 Basic instructions_html_c0e65cfeed403ecf.png]]
--
--When X000 is ON, when D0<(-1,000), the value of ( D0)-(-1,000) is stored in (D1).
--
--• When -1,000≦ D0≦1,000, 0 is stored in D1.
--
--• When D0<1,000, the value of (D0)-1,000 is stored in D1.
--
--{{id name="_Toc1180"/}}{{id name="_Toc21657"/}}{{id name="_Toc27323"/}}[[image:07-5 Basic instructions_html_11b3991e89e21efc.gif]] **DBAND/BIN 32-bit data dead zone control**
--
--**DBAND(P)**
--
--The input value (BIN 32-bit value) specified in (s3) controls the output value stored in the device specified in (d) according to the upper and lower limits of the dead zone specified in (s1) and (s2).
--
---[DBAND (s1) (s2) (S3) (d)]
--
--**Content, range and data type**
--
--|**Parameter**|**Content**|**Range**|**Data type**|**Data type (label)**
--|(s1)|Dead zone low limit (no output zone)|-2,147,483,648 to +2,147,483,647|Signed BIN 32 bit|ANY32_S
--|(s2)|Dead zone high limit (no output zone)|-2,147,483,648 to +2,147,483,647|Signed BIN 32 bit|ANY32_S
--|(S3)|Input value controlled by dead zone control|-2,147,483,648 to +2,147,483,647|Signed BIN 32 bit|ANY32_S
--|(d)|The start number of the device that stores the output value controlled by the dead zone control|-|Signed BIN 32 bit|ANY32_S
--
--**Device used**
--
--|(% rowspan="2" %)**Instruction**|(% rowspan="2" %)**Parameter**|(% colspan="24" %)**Devices**|**Offset modification**|(((
--**Pulse**
--
--**extension**
--)))
--|**X**|**Y**|**M**|**S**|**SM**|**T(bit)**|**C(bit)**|**LC(bit)**|**HSC(bit)**|**D.b**|**KnX**|**KnY**|**KnM**|**KnS**|**T**|**C**|**D**|**R**|**SD**|**LC**|**HSC**|**K**|**H**|**E**|**[D]**|**XXP**
--|(% rowspan="4" %)DBAND|Parameter 1| | | | | | | | | | |●|●|●|●|●|●|●|●|●|●|●|●|●| |●|●
--|Parameter 2| | | | | | | | | | |●|●|●|●|●|●|●|●|●|●|●|●|●| |●|●
--|Parameter 3| | | | | | | | | | |●|●|●|●|●|●|●|●|●|●|●| | | |●|●
--|Parameter 4| | | | | | | | | | | |●|●|●|●|●|●|●|●|●|●| | | |●|●
--
--**Features**
--
--The input value (BIN 32-bit value) specified in (s3) controls the output value stored in the device specified in (d) according to the upper and lower limits of the dead zone specified in (s1) and (s2). The output value is controlled as follows.
--
--|**Condition**|**The value stored in the output value**
--|When dead zone low limit ((s1), (s1)+1)> input value ((s3), (s3)+1)|{{id name="OLE_LINK42"/}}Input value ((s3), (s3)+1)-dead zone low limit ((s1), (s1)+1)
--|When dead zone high limit ((s1), (s1)+1) <input value ((s3), (s3)+1)|{{id name="OLE_LINK357"/}}Input value ((s3), (s3)+1)-dead zone high limit ((s2), (s2)+1)
--|When dead zone low limit ((s1), (s1)+1) ≤ input value ((s3), (s3)+1) ≤ dead zone high limit ((s2), (s2)+1)|0
--
--
--(((
--• When the output value stored in (d) is a signed BIN 32-bit value, and the operation result exceeds the range of -2,147,483,648 to 2,147,483,647, the situation is as the following example. For example,** &nbsp;**When (s1) and (s1)+1 are 1000, (s3) and (s3)+1 are -2,147,483,648, then the output value=
--
---2,147,483,648-1000=80000000H-000003E8H=7FFFFC18H=2,147,482,648.
--
--[[image:07-5 Basic instructions_html_e0144674dad3e8fd.png]]
--
--
--
--)))
--
--**Error code**
--
--|**Error code**|**Content**
--|4085H|When the specified device range for reading exceeds the range of the corresponding device.
--|4086H|When the specified device range for writing exceeds the range of the corresponding device.
--|4084H|When the low limit specified in (s1) is greater than the high limit specified in (s2).
--
--**Example**
--
--[[image:07-5 Basic instructions_html_88f3fe0fb4841bab.png]]
--
--• When (D1, D0)<(-10,000), the value of (D1, D0)-(-10,000) is stored in (D11, D10).
--
--• When -10,000≦(D1, D0)≦10,000, 0 is stored in (D11, D10).
--
--• When 10,000< (D1, D0), the value of (D1, D0)-10,000 is stored in D1.
--
--{{id name="_Toc21668"/}}{{id name="_Toc25056"/}}{{id name="_Toc17582"/}}{{id name="OLE_LINK165"/}}**BINDA/BIN 16-bit data → Decimal ASCII conversion**
--
--[[image:07-5 Basic instructions_html_11b3991e89e21efc.gif]] **BINDA(P)**
--
--Convert the BIN 16-bit data specified in (s) and the value of each digit in decimal numbers into ASCII codes and store them after the device number specified in (d).
--
---[BINDA(s)(d)]
--
--**Content, range and data type**
--
--|**Parameter**|**Content**|**Range**|**Data type**|**Data type (label)**
--|(s)|BIN data for ASCII conversion|-32768 to +32767|Signed BIN 16 bit|ANY16_S
--|(d)|The start number of the device storing the conversion result|-|String|ANYSTRING_SINGLE
--
--**Device used**
--
--|(% rowspan="2" %)**Instruction**|(% rowspan="2" %)**Parameter**|(% colspan="24" %)**Devices**|**Offset modification**|(((
--**Pulse**
--
--**extension**
--)))
--|**X**|**Y**|**M**|**S**|**SM**|**T(bit)**|**C(bit)**|**LC(bit)**|**HSC(bit)**|**D.b**|**KnX**|**KnY**|**KnM**|**KnS**|**T**|**C**|**D**|**R**|**SD**|**LC**|**HSC**|**K**|**H**|**E**|**[D]**|**XXP**
--|(% rowspan="2" %)BINDA|Parameter 1| | | | | | | | | | |●|●|●|●|●|●|●|●|●| | |●|●| |●|●
--|Parameter 2| | | | | | | | | | | | | | | | |●|●|●| | | | | |●|●
--
--**Features**
--
--Convert the BIN 16-bit data specified in (s) and the value of each digit in decimal numbers into ASCII codes and store them after the device number specified in (d).
--
--
--
--(((
--←Only store 0 when SM191 is OFF
--
--[[image:07-5 Basic instructions_html_57bda5f08026449d.png]]
--)))
--
--For example, when -12,345 is specified in (s) (in the case of specifying signed)
--
--[[image:07-5 Basic instructions_html_f346102467b9bef9.png]]
--
--The calculation result stored in (d) will be as below.
--
--• In "Sign", 20H is stored when the BIN data is positive, and 2DH is stored when it is negative.
--
--• In the 0 to the left of the effective digit, 20H is stored. (Suppress 0.) For example, in the case of "00325", "00" becomes 20H, and "325" becomes the effective digit.
--
--• When storing data to the device specified in (d)+3, when SM191 (output character number switching signal) is OFF, 0 is stored, and it does not change when it is ON.
--
--✎**Note: **The number of occupied points of (d) is 3 when SM191 is ON, and it is 4 when SM191 is OFF.
--
--**Error code**
--
--|**Error code**|**Content**
--|4085H|The read address of (s) exceeds the device range.
--|4086H|The write address of (d) exceeds the device range.
--
--**Example**
--
--
--
--(((
--When X000 is ON, convert the value of 16-bit data (BIN) D1000 into decimal ASCII code, and then use PR instruction to output the
--
--converted ASCII code character by character to the program of Y040 to Y057.
--
--[[image:07-5 Basic instructions_html_c598806a42484ed.png]]
--)))
--
--{{id name="_Toc12255"/}}{{id name="_Toc8216"/}}{{id name="_Toc470"/}}**DBINDA/BIN 32-bit data → Decimal ASCII conversion**
--
--[[image:07-5 Basic instructions_html_11b3991e89e21efc.gif]] **DBINDA(P)**
--
--Convert the BIN 32-bit data specified in (s) and the value of each bit in decimal numbers into ASCII codes and store them after the device number specified in (d).
--
---[DBINDA(s)(d)]
--
--**Content, range and data type**
--
--|**Parameter**|**Content**|**Range**|**Data type**|**Data type (label)**
--|(s)|BIN data for ASCII conversion|-2,147483648 to 2147483647|Signed BIN 32 bit|ANY32_S
--|(d)|{{id name="OLE_LINK2"/}}The start number of the device storing the conversion result|-|String|ANYSTRING_SINGLE
--
--**Device used**
--
--|(% rowspan="2" %)**Instruction**|(% rowspan="2" %)**Parameter**|(% colspan="24" %)**Devices**|(((
--**Offset**
--
--**modification**
--)))|(((
--**Pulse**
--
--**extension**
--)))
--|**X**|**Y**|**M**|**S**|**SM**|**T(bit)**|**C(bit)**|**LC(bit)**|**HSC(bit)**|**D.b**|**KnX**|**KnY**|**KnM**|**KnS**|**T**|**C**|**D**|**R**|**SD**|**LC**|**HSC**|**K**|**H**|**E**|**[D]**|**XXP**
--|(% rowspan="2" %)DBINDA|Parameter 1| | | | | | | | | | |●|●|●|●|●|●|●|●|●|●|●|●|●| |●|●
--|Parameter 2| | | | | | | | | | | | | | | | |●|●|●| | | | | |●|●
--
--**Features**
--
--Convert the BIN 32-bit data specified in (s) and the value of each bit when expressed in decimal numbers into ASCII codes, and store them after the device number specified in (d).
--
--For example, when -12345678 is specified in (s). (in the case of specifying signed)
--
--[[image:07-5 Basic instructions_html_4d939462838cf09b.gif]] The calculation result stored in (d) will be as below.
--
--• In "Sign", 20H is stored when the BIN data is positive, and 2DH is stored when it is negative.
--
--• 20H is stored at 0 to the left of the effective number of digits. (Suppress 0.) For example, in the case of "0012034560", "00" becomes 20H, and "12034560" becomes effective digits.
--
--• For the data stored in the upper 8 bits of the device specified in (d)+5, 0 will be stored when SM191 (output character switching signal) is OFF, and 20H will be stored when it is ON.
--
--✎**Note: **(d) Occupies 6 points.
--
--**Error code**
--
--|**Error code**|**Content**
--|4085H|(s) read address exceeds the device range
--|4086H|(d) write address exceeds the device range
--
--**Example**
--
--[[image:07-5 Basic instructions_html_ec8ac32d748a991c.png]]
--
--When X000 is ON, convert the value of 32-bit data (BIN) D1000 into decimal ASCII code, and then use PR (FNC 77) instruction to output the converted ASCII code character by character to the program in Y040 to Y051 in time and time division.
--
--{{id name="_Toc19693"/}}{{id name="_Toc18078"/}}{{id name="_Toc5726"/}}**DABIN/Decimal ASCII → BIN conversion**
--
--[[image:07-5 Basic instructions_html_11b3991e89e21efc.gif]] **DABIN(P)**
--
--Digital ASCII code (30H to 39H) is a instruction to convert real data into BIN data.
--
---[DABIN (s) (d)]
--
--**Content, range and data type**
--
--|**Parameter**|**Content**|**Range**|**Data type**|**Data type (label)**
--|(s)|The start number of the device that stores the data (ASCII code) to be converted into a BIN value|-|String|ANYSTRING_SINGLE
--|(d)|The device number for storing conversion result|-|BIN16 bit|ANY16_S
--
--**Device used**
--
--|(% rowspan="2" %)**Instruction**|(% rowspan="2" %)**Parameter**|(% colspan="24" %)**Devices**|**Offset modification**|(((
--**Pulse**
--
--**extension**
--)))
--|**X**|**Y**|**M**|**S**|**SM**|**T(bit)**|**C(bit)**|**LC(bit)**|**HSC(bit)**|**D.b**|**KnX**|**KnY**|**KnM**|**KnS**|**T**|**C**|**D**|**R**|**SD**|**LC**|**HSC**|**K**|**H**|**E**|**[D]**|**XXP**
--|(% rowspan="2" %)DABIN|Parameter 1| | | | | | | | | | | | | | | | |●|●|●| | | | | |●|●
--|Parameter 2| | | | | | | | | | | |●|●|●|●|●|●|●|●| | | | | |●|●
--
--**Features**
--
--The decimal ASCII data stored after the device number specified in (s) is converted into BIN 16-bit data and stored in the device specified in (d).
--
--[[image:07-5 Basic instructions_html_22c5cb32a0a32214.png]]
--
--|**ASCII S**|**ASCII 10^^0^^**|**ASCII 10^^1^^**|**ASCII 10^^2^^**|**ASCII 10^^3^^**|**ASCII 10^^4^^**
--|**ASCII code**|(((
--{{id name="OLE_LINK36"/}}Units of
--
--ASCII code
--)))|(((
--Tens of
--
--ASCII code
--)))|(((
--Hundreds of
--
--ASCII code
--)))|(((
--Thousands of
--
--ASCII code
--)))|(((
--Ten thousands
--
--of ASCII code
--)))
--
--For example, When -25,108 is specified in (s)
--
--[[image:07-5 Basic instructions_html_10fb2792e37dbf23.png]]
--
--• The ASCII data specified in (s) to (s)+2 is within the range of -32,768 to +32,767.
--
--• In “Sign”, set 20H when the converted data is positive, and set 2DH when it is negative. (When other than 20H or 2DH is set, it will be treated as positive data. (DABIN(P))
--
--• The range of the ASCII code set in each digit is 30H to 39H.
--
--• When the ASCII code set in each bit is 20H or 00H, it will be treated as 30H.
--
--**Error code**
--
--|**Error code**|**Content**
--|4084H|(((
--When the Sign data exceeds the range of 30H to 39H, 20H, 00H, 2DH;
--
--When the ASCII code of each bit specified in (s) to (s)+2 exceeds the range of 30H to 39H, 20H, 00H;
--
--When the ASCII data specified in (s) to (s)+2 is other than -32,768 to +32,767.
--)))
--|4085H|The read address of (s) exceeds the device range.
--|4086H|The write address of (d) exceeds the device range.
--
--
--(((
--When X000 is ON, the Signs set in D20 to D22 and the ASCII code data of 5-digit decimal numbers are converted into BIN values, and then stored in the program of D0.
--
--**Example**
--)))
--
--[[image:07-5 Basic instructions_html_bec2bea131b58c03.png]]
--
--{{id name="_Toc3351"/}}{{id name="_Toc26383"/}}{{id name="_Toc26233"/}}**DDABIN/Decimal ASCII → BIN32-bit data conversion**
--
--[[image:07-5 Basic instructions_html_11b3991e89e21efc.gif]] **DDABIN(P)**
--
--The decimal ASCII data stored after the device number specified in (s) is converted into BIN 32-bit data and stored in the device number specified in (d).
--
---[DDABIN (s) (d) ]
--
--**Content, range and data type**
--
--|**Parameter**|**Content**|**Range**|**Data type**|**Data type (label)**
--|(s)|The start number of the device that stores data (ASCII code) to be converted into a BIN value|-|String|ANYSTRING_SINGLE
--|(d)|The device number for storing conversion result|-|Signed BIN 32 bit|ANY32_S
--
--**Device used**
--
--|(% rowspan="2" %)**Instruction**|(% rowspan="2" %)**Parameter**|(% colspan="24" %)**Devices**|**Offset modification**|(((
--**Pulse**
--
--**extension**
--)))
--|**X**|**Y**|**M**|**S**|**SM**|**T(bit)**|**C(bit)**|**LC(bit)**|**HSC(bit)**|**D.b**|**KnX**|**KnY**|**KnM**|**KnS**|**T**|**C**|**D**|**R**|**SD**|**LC**|**HSC**|**K**|**H**|**E**|**[D]**|**XXP**
--|(% rowspan="2" %)DDABIN|Parameter 1| | | | | | | | | | | | | | | | |●|●|●| | | | | |●|●
--|Parameter 2| | | | | | | | | | | |●|●|●|●|●|●|●|●|●|●| | | |●|●
--
--**Features**
--
--The decimal ASCII data stored after the device number specified in (s) is converted into BIN 32-bit data and stored in the device specified in (d).
--
--[[image:07-5 Basic instructions_html_c444110b273f33b7.gif]]
--
--|**ASCII S**|**ASCII code**|**ASCII S**|**ASCII code**
--|ASCII 10^^0^^|Units of ASCII code|ASCII 10^^5^^|{{id name="OLE_LINK38"/}}Hundred thousands of ASCII code
--|ASCII 10^^1^^|Tens of ASCII code|ASCII 10^^6^^|Millions of ASCII code
--|ASCII 10^^2^^|Hundreds of ASCII code|ASCII 10^^7^^|Ten millions of ASCII code
--|ASCII 10^^3^^|{{id name="OLE_LINK37"/}}Thousands of ASCII code|ASCII 10^^8^^|Hundred millions of ASCII code
--|ASCII 10^^4^^|Tens thousands of ASCII code|ASCII 10^^9^^|billions of ASCII code
--
--When -1234543210 is specified in (s) (When signed is specified)
--
--[[image:07-5 Basic instructions_html_1b4c7e1c663a4399.png]]
--
--• The ASCII data specified in (s) to (s)+5 is within the range of -2,147,483,648 to +2,147,483,647. In addition, the data stored in the high byte of (s)+5 will be ignored.
--
--• In the Sign data, set 20H when the converted data is positive, and set 2DH when it is negative. (When other than 20H or 2DH is set, it will be treated as positive data. (DABIN(P))
--
--• The range of ASCII code set in each digit is 30H to 39H.
--
--• When the ASCII code set in each bit is 20H or 00H, it will be treated as 30H.
--
--**Error code**
--
--|**Error code**|**Content**
--|4084H|(((
--When the Sign data exceeds the range of 30H to 39H, 20H, 00H and 2DH;
--
--{{id name="OLE_LINK39"/}}When the ASCII code of each bit specified in (s) to (s)+5 exceeds the range of 30H to 39H, 20H and 00H;
--
--When the ASCII data specified in (s) to (s)+5 exceeds the range of -2,147,483,648 to +2,147,483,647
--)))
--|4085H|The read address of (s) exceeds the device range.
--|4086H|The write address of (d) exceeds the device range.
--
--**Example**
--
--[[image:07-5 Basic instructions_html_feea438c943ea9dd.png]]
--
--When X000 is ON, the Signs set in to D20 to D25 and the ASCII code data of 10-digit decimal numbers are converted into BIN values and then saved to the program in D0 to D1.
--
--{{id name="_Toc26556"/}}{{id name="_Toc12799"/}}{{id name="_Toc23863"/}}**LIMIT/ BIN 16-bit data high and low limit control**
--
--[[image:07-5 Basic instructions_html_11b3991e89e21efc.gif]] **LIMIT(P)**
--
--The input value (BIN 16-bit value) specified in (s3) controls the output value stored in the device specified in (d) according to the upper and lower limit value ranges specified in (s1) and (s2).
--
---[LIMIT (s1) (s2) (s3) (d)]
--
--**Content, range and data type**
--
--|**Parameter**|**Content**|**Range**|**Data type**|**Data type (label)**
--|s1|Low limit value (minimum output limit value)|-32,768 to 32,767|BIN16 bit|ANY16_S
--|s2|High limit value (maximum output limit value)|-32,768 to 32,767|BIN16 bit|ANY16_S
--|s3|Input value controlled by high and low limit control|-32,768 to 32,767|BIN16 bit|ANY16_S
--|d|The start number of device that stores the output value controlled by high and low limit control|-|BIN16 bit|ANY16_S
--
--**Device used**
--
--|(% rowspan="2" %)**Instruction**|(% rowspan="2" %)**Parameter**|(% colspan="24" %)**Devices**|**Offset modification**|(((
--**Pulse**
--
--**extension**
--)))
--|**X**|**Y**|**M**|**S**|**SM**|**T(bit)**|**C(bit)**|**LC(bit)**|**HSC(bit)**|**D.b**|**KnX**|**KnY**|**KnM**|**KnS**|**T**|**C**|**D**|**R**|**SD**|**LC**|**HSC**|**K**|**H**|**E**|**[D]**|**XXP**
--|(% rowspan="4" %)LIMIT|Parameter 1| | | | | | | | | | |●|●|●|●|●|●|●|●|●| | |●|●| |●|●
--|Parameter 2| | | | | | | | | | |●|●|●|●|●|●|●|●|●| | |●|●| |●|●
--|Parameter 3| | | | | | | | | | |●|●|●|●|●|●|●|●|●| | | | | |●|●
--|Parameter 4| | | | | | | | | | | |●|●|●|●|●|●|●|●| | | | | |●|●
--
--**Features**
--
--The input value (BIN 16-bit value) specified in (s3) controls the output value stored in the device specified in (d) according to the high and low limit value ranges specified in (s1) and (s2). The output value is controlled as follows.
--
--|**Condition**|**The value stored in the output value**
--|Low limit value (s1)>input value (s3)|Low limit value (s1)
--|High limit value (s1) <input value (s3)|High limit value (s2)
--|Low limit value (s1) ≤ input value (s3) ≤ high limit value (s2)|Input value (s3)
--
--
--(((
--•Only in the case of controlling high limit value, set the minimum value of data range in the low limit value specified in (s1).
--
--• Only in the case of controlling low limit value, set the maximum value of data range in the high limit value specified in (s2).
--
--[[image:07-5 Basic instructions_html_50eb5229b027aa14.png]]
--)))
--
--**Error code**
--
--|**Error code**|**Content**
--|4085H|The read address exceeds the device range
--|4086H|The write address exceeds the device range
--|4084H|High limit <low limit
--
--**Example**
--
--[[image:07-5 Basic instructions_html_d67a2e740d4fc738.png]]
--
--When X000 is ON
--
--• When D0 <500, D1 is 500.
--
--• When 500 ≤ D0 ≤ 5,000, D1 is the value of D0.
--
--• When 5,000 <D0, D1 is 5,000.
--
--{{id name="_Toc32553"/}}{{id name="_Toc9981"/}}{{id name="_Toc9158"/}}**DLIMIT/BIN 32-bit data high and low limit control**
--
--[[image:07-5 Basic instructions_html_11b3991e89e21efc.gif]] **DLIMIT(P)**
--
--The input value (BIN 32-bit value) specified in (s3) controls the output value stored in the device specified in (d) according to the range of high and low limit values specified in (s1) and (s2).
--
---[DLIMIT (s1) (s2) (s3) (d)]
--
--**Content, range and data type**
--
--|**Parameter**|**Content**|**Range**|**Data type**|**Data type (label)**
--|s1|Low limit value (minimum output limit value)|-2,147,483,648 to 2,147,483,647|BIN32 bit|ANY32_S
--|s2|High limit value (maximum output limit value)|-2,147,483,648 to 2,147,483,647|BIN32 bit|ANY32_S
--|s3|Input value controlled by high and low limit control|-2,147,483,648 to 2,147,483,647|BIN32 bit|ANY32_S
--|d|The start number of the device that stores the output value controlled by high and low limit control|-|BIN32 bit|ANY32_S
--
--**Device used**
--
--|(% rowspan="2" %)**Instruction**|(% rowspan="2" %)**Parameter**|(% colspan="24" %)**Devices**|**Offset modification**|(((
--**Pulse**
--
--**extension**
--)))
--|**X**|**Y**|**M**|**S**|**SM**|**T(bit)**|**C(bit)**|**LC(bit)**|**HSC(bit)**|**D.b**|**KnX**|**KnY**|**KnM**|**KnS**|**T**|**C**|**D**|**R**|**SD**|**LC**|**HSC**|**K**|**H**|**E**|**[D]**|**XXP**
--|(% rowspan="4" %)DLIMIT|Parameter 1| | | | | | | | | | |●|●|●|●|●|●|●|●|●|●|●|●|●| |●|●
--|Parameter 2| | | | | | | | | | |●|●|●|●|●|●|●|●|●|●|●|●|●| |●|●
--|Parameter 3| | | | | | | | | | |●|●|●|●|●|●|●|●|●|●|●| | | |●|●
--|Parameter 4| | | | | | | | | | | |●|●|●|●|●|●|●|●|●|●| | | |●|●
--
--**Features**
--
--The input value (BIN 32-bit value) specified in (s3) controls the output value stored in the device specified in (d) according to the range of high and low limit values specified in (s1) and (s2). The output value is controlled as follows.
--
--|**Condition**|**The value stored in the output value**
--|Low limit value ((s1), (s1)+1)> input value ((s3), (s3)+1)|Low limit value ((s1), (s1)+1)
--|High limit value ((s2), (s2)+1) <input value ((s3), (s3)+1)|High limit value ((s2), (s2)+1)
--|Low limit value ((s1), (s1)+1) ≤ input value ((s3), (s3)+1) ≤ high limit value ((s2), (s2)+1)|Input value ((s3), (s3)+1)
--
--{{id name="OLE_LINK43"/}}{{id name="OLE_LINK40"/}}•Only in the case of controlling high limit value, set the minimum value of data range in the low limit value specified in (s1).
--
--• Only in the case of controlling low limit value, set the maximum value of data range in the high limit value specified in (s2).
--
--**Error code**
--
--|**Error code**|**Content**
--|4085H|The read address exceeds the device range
--|4086H|The write address exceeds the device range
--|4084H|High limit <low limit
--
--**Example**
--
--[[image:07-5 Basic instructions_html_217355b90f4b4e16.png]]
--
--Operation:
--
--• When (D1, D0) <10,000, (D11, D10) is 10,000.
--
--• When 10,000 ≤ (D1, D0) ≤ 1,000,000, (D11, D10) is the value of (D1, D0).
--
--• When 1,000,000 <(D1, D0), (D11, D10) is 1,000,000.
--
--{{id name="_Toc12534"/}}{{id name="_Toc28213"/}}{{id name="_Toc24591"/}}**SCL/BIN 16-bit unit scale (coordinate data of each point)**
--
--[[image:07-5 Basic instructions_html_11b3991e89e21efc.gif]] **SCL(P)**
--
--The scaling conversion data (16-bit data unit) specified in (s2) is scaled from the input value specified in (s1), and the calculation result is stored in the device specified in (d).
--
---[SCL (s1) (s2) (d)]
--
--**Content, range and data type**
--
--|**Parameter**|**Content**|**Range**|**Data type**|**Data type (label)**
--|(s1)|The input value for scaling or the start number of device storing the input value|-32,768 to 32,767|Signed BIN 16 bit|ANY16_S
--|(s2)|The start number of the device storing conversion data for scaling|-|Signed BIN 16 bit|ANY16_S
--|(d)|The start number of the device that stores the output value controlled by scaling|-|Signed BIN 16 bit|ANY16_S
--
--**Device used**
--
--|(% rowspan="2" %)**Instruction**|(% rowspan="2" %)**Parameter**|(% colspan="24" %)**Devices**|**Offset modification**|(((
--**Pulse**
--
--**extension**
--)))
--|**X**|**Y**|**M**|**S**|**SM**|**T(bit)**|**C(bit)**|**LC(bit)**|**HSC(bit)**|**D.b**|**KnX**|**KnY**|**KnM**|**KnS**|**T**|**C**|**D**|**R**|**SD**|**LC**|**HSC**|**K**|**H**|**E**|**[D]**|**XXP**
--|(% rowspan="3" %)SCL|Parameter 1| | | | | | | | | | |●|●|●|●|●|●|●|●|●| | |●|●| |●|●
--|Parameter 2| | | | | | | | | | | | | | | | |●|●|●| | | | | |●|●
--|Parameter 3| | | | | | | | | | | |●|●|●|●|●|●|●|●| | | | | |●|●
--
--**Features**
--
--For the scale conversion data (16-bit data unit) specified in (s2), scale by the input value specified in (s1), and store the operation result in the device specified in (d). Scale conversion is performed based on the scale conversion data stored after the device specified in (s2).
--
--|(% colspan="2" %)**Setting items (n represents the number of coordinate points specified in (s2))**|**Device allocation**
--|(% colspan="2" %)Coordinate points|(s2)
--|(% rowspan="2" %)Point 1|X coordinate|(s2)+1
--|Y coordinate|(s2)+2
--|(% rowspan="2" %)Point 2|X coordinate|(s2)+3
--|Y coordinate|(s2)+4
--|(% colspan="3" %)........
--|(% rowspan="2" %)Point n|X coordinate|(s2)+2n-1
--|Y coordinate|(s2)+2n
--
--[[image:07-5 Basic instructions_html_80185ccddb878234.png]]
--
--• If the operation result is not an integer value, round the first digit below the decimal point.
--
--• The X coordinate data of the conversion data for scaling should be set in ascending order.
--
--• (s1) should be set within the range of conversion data for scaling (device value of (s2)).
--
--• If the same X coordinate is specified for multiple points, the Y coordinate value of the second point will be output.
--
--• Set the number of coordinate points of the conversion data for scaling within the range of 1 to 32,767.
--
--• Setting example of conversion table for scaling.
--
--In the case of scaling conversion characteristics as shown in the figure below, set it as the following data sheet.
--
--[[image:07-5 Basic instructions_html_74fd22d845ad450e.png]]
--
--|(% colspan="2" rowspan="2" %)**Set &nbsp;&nbsp;&nbsp;&nbsp;items**|(% colspan="3" %)**Sett &nbsp;&nbsp;&nbsp;&nbsp;device and content**|(% rowspan="2" %)**Remarks**
--|(% colspan="2" %)**When R0 is specified in (s2)**|**Set &nbsp;&nbsp;&nbsp;&nbsp;content**
--|(% colspan="2" %)Coordinate points|(s2)|R0|K10|
--|(% rowspan="2" %)Point 1|X coordinate|(s2)+1|R1|K5|
--|Y coordinate|(s2)+2|R2|K20|
--|(% rowspan="2" %)Point 2|X coordinate|(s2)+3|R3|K30|
--|Y coordinate|(s2)+4|R4|K50|
--|(% rowspan="2" %)Point 3|X coordinate|(s2)+5|R5|K100|
--|Y coordinate|(s2)+6|R6|K200|
--|(% rowspan="2" %)Point 4|X coordinate|(s2)+7|R7|K25|(% rowspan="6" %)(((
--If the coordinates are specified by 3 points, the intermediate value could be the output value.
--
--In this example, the output value (median value) is specified by the Y coordinate of point 5.
--
--When the X coordinate is the same at 3 points or more, the value of the 2nd point is also output.
--)))
--|Y coordinate|(s2)+8|R8|K200
--|(% rowspan="2" %)Point 5|X coordinate|(s2)+9|R9|K70
--|Y coordinate|(s2)+10|R10|K200
--|(% rowspan="2" %)Point 6|X coordinate|(s2)+11|R11|K250
--|Y coordinate|(s2)+12|R12|K250
--|(% rowspan="2" %)Point 7|X coordinate|(s2)+13|R13|K250|
--|Y coordinate|(s2)+14|R14|K90|
--|(% rowspan="2" %)Point 8|X coordinate|(s2)+15|R15|K350|(% rowspan="4" %)(((
--If the coordinates are specified by two points, the output value is the value of the Y coordinate of the next point.
--
--In this example, the output value is specified by the Y coordinate of point 9.
--)))
--|Y coordinate|(s2)+16|R16|K90
--|(% rowspan="2" %)Point 9|X coordinate|(s2)+17|R17|K350
--|Y coordinate|(s2)+18|R18|K30
--|(% rowspan="2" %)Point 10|X coordinate|(s2)+19|R19|K400|
--|Y coordinate|(s2)+20|R20|K7|
--
--**Error code**
--
--|**Error code**|**Content**
--|4085H|When the specified device range for reading exceeds the range of the corresponding device.
--|4086H|When the specified device range for writing exceeds the range of the corresponding device.
--|4084H|(((
--When the Xn data of data table is not sorted in ascending order. However, the instruction will be executed until the position where the error occurs;
--
--When the input value specified in (s1) exceeds the range of the set scale conversion data;
--
--When the number of start coordinate points of device (s2) is less than 0.
--)))
--
--**Example**
--
--[[image:07-5 Basic instructions_html_5519d7b41f15b6d6.png]]
--
--[[image:07-5 Basic instructions_html_ace075fb7675de8e.gif]] When -100 ≤ D0(X) < 0, D100(Y)=
--
--[[image:07-5 Basic instructions_html_9acd6306c6d91847.gif]] when D0(X)=0, D100(Y)=0;
--
--when 0< D0(X) ≤ 100, D100(Y)=
--
--[[image:07-5 Basic instructions_html_e35e13160c08a133.png]]
--
--
--
--{{id name="_Toc4862"/}}{{id name="_Toc11340"/}}{{id name="_Toc25383"/}}**DSCL/32-bit unit scale (coordinate data of each point)**
--
--[[image:07-5 Basic instructions_html_11b3991e89e21efc.gif]] **DSCL(P)**
--
--The conversion data (32-bit data unit) for scaling specified in (s2) is scaled by the input value specified in (s1), and the operation result is stored in the device specified in (d).
--
---[DSCL (s1) (s2) (d)]
--
--**Content, range and data type**
--
--|**Parameter**|**Content**|**Range**|**Data type**|**Data type (label)**
--|(s1)|The input value for scaling or the start number of the device storing the input value|-2,147,483,648 to 2,147,483,647|Signed BIN 32 bit|ANY32_S
--|(s2)|The start number of the device storing conversion data for scaling|-|Signed BIN 32 bit|ANY32_S
--|(d)|The start number of the device that stores the output value controlled by scaling|-|Signed BIN 32 bit|ANY32_S
--
--**Device used**
--
--|(% rowspan="2" %)**Instruction**|(% rowspan="2" %)**Parameter**|(% colspan="24" %)**Device**|**Offset modification**|(((
--**Pulse**
--
--**extension**
--)))
--|**X**|**Y**|**M**|**S**|**SM**|**T(bit)**|**C(bit)**|**LC(bit)**|**HSC(bit)**|**D.b**|**KnX**|**KnY**|**KnM**|**KnS**|**T**|**C**|**D**|**R**|**SD**|**LC**|**HSC**|**K**|**H**|**E**|**[D]**|**XXP**
--|(% rowspan="3" %)DSCL|Parameter 1| | | | | | | | | | |●|●|●|●|●|●|●|●|●|●|●|●|●| |●|●
--|Parameter 2| | | | | | | | | | | | | | | | |●|●|●| | | | | |●|●
--|Parameter 3| | | | | | | | | | | |●|●|●|●|●|●|●|●|●|●| | | |●|●
--
--**Features**
--
--{{id name="OLE_LINK41"/}}The conversion data (32-bit data unit) for scaling specified in (s2) is scaled by the input value specified in (s1), and the operation result is stored in the device number specified in (d). The scale conversion is performed based on the scale conversion data stored after the device specified in (s2).
--
--|(% colspan="2" %)**Set items (n represents the number of coordinate points specified in (s2))**|**Device allocation**
--|(% colspan="2" %)Coordinate points|(s2)+1, (s2)
--|(% rowspan="2" %)Point 1|X coordinate|(s2)+3, (s2)+2
--|Y coordinate|(s2)+5, (s2)+4
--|(% rowspan="2" %)Point 2|X coordinate|(s2)+7, (s2)+6
--|Y coordinate|(s2)+9, (s2)+8
--|(% colspan="3" %)........
--|(% rowspan="2" %)Point n|X coordinate|(s2)+4n-1, (s2)+4n-2
--|Y coordinate|(s2)+4n+1, (s2)+4n
--
--[[image:07-5 Basic instructions_html_6633ca18cee1218c.png]]
--
--• If the calculation result is not an integer value, round the first digit below the decimal point.
--
--• The X coordinate data of the conversion data for scaling should be set in ascending order.
--
--• For (s1), set within the range of the conversion data for scaling ((s2), (s2) + 1 device value).
--
--• If the same X coordinate is specified for multiple points, the Y coordinate value of the second point will be output.
--
--• Set the number of coordinate points of conversion data for scaling within the range of 1 to 2,147,483,647.
--
--• Setting example of conversion table for scaling.
--
--In the case of scaling conversion characteristics as shown in the figure below, set it as the following data sheet.
--
--[[image:07-5 Basic instructions_html_74fd22d845ad450e.png]]
--
--|(% colspan="2" rowspan="2" %)**Set items**|(% colspan="3" %)**Set &nbsp;&nbsp;&nbsp;&nbsp;device and content**|(% rowspan="2" %)**Remarks**
--|(% colspan="2" %)**When R0 is specified in (s2)**|**Set &nbsp;&nbsp;&nbsp;&nbsp;content**
--|(% colspan="2" %)Coordinate points|(s2)+1, (s2)|R1, R0|K10|
--|(% rowspan="2" %)Point 1|X coordinate|(s2)+3, (s2)+2|R3, R2|K5|
--|Y coordinate|(s2)+5, (s2)+4|R5, R4|K7|
--|(% rowspan="2" %)Point 2|X coordinate|(s2)+7, (s2)+6|R7, R6|K20|
--|Y coordinate|(s2)+9, (s2)+8|R9, R8|K30|
--|(% rowspan="2" %)Point 3|X coordinate|(s2)+11, (s2)+10|R10, R11|K50|
--|Y coordinate|(s2)+13, (s2)+12|R13, R12|K100|
--|(% rowspan="2" %)Point 4|X coordinate|(s2)+15, (s2)+14|R15, R14|K200|(% rowspan="6" %)(((
--if the coordinates are specified by 3 points, the intermediate value could be the output value.
--
--In this example, the output value (median value) is specified by the Y coordinate of point 5.
--
--When the X coordinate is the same at 3 points or more, the value of the 2nd point is also output.
--)))
--|Y coordinate|(s2)+17, (s2)+16|R17, R16|K25
--|(% rowspan="2" %)Point 5|X coordinate|(s2)+19, (s2)+18|R19, R18|K200
--|Y coordinate|(s2)+21, (s2)+20|R21, R20|K70
--|(% rowspan="2" %)Point 6|X coordinate|(s2)+23, (s2)+22|R23, R22|K200
--|Y coordinate|(s2)+25, (s2)+24|R25, R24|K250
--|(% rowspan="2" %)Point 7|X coordinate|(s2)+27, (s2)+26|R27, R26|K250|
--|Y coordinate|(s2)+29, (s2)+28|R29, R28|K90|
--|(% rowspan="2" %)Point 8|X coordinate|(s2)+31, (s2)+30|R31, R30|K350|(% rowspan="4" %)(((
--If the coordinates are specified by two points, the output value is the value of the Y coordinate of the next point.
--
--In this example, the output value is specified by the Y coordinate of point 9.
--)))
--|Y coordinate|(s2)+33, (s2)+32|R33, R32|K90
--|(% rowspan="2" %)Point 9|X coordinate|(s2)+35, (s2)+34|R35, R34|K350
--|Y coordinate|(s2)+37, (s2)+36|R37, R36|K30
--|(% rowspan="2" %)Point 10|X coordinate|(s2)+39, (s2)+38|R39, R38|K400|
--|Y coordinate|(s2)+41, (s2)+40|R41, R40|K7|
--
--**Error code**
--
--|**Error code**|**Content**
--|4085H|When the specified device range for reading exceeds the range of the corresponding device.
--|4086H|When the specified device range for writing exceeds the range of the corresponding device.
--|4084H|(((
--When the Xn data of data table is not sorted in ascending order. However, the instruction will be executed until the position where the error occurs;
--
--When the input value specified in (s1) exceeds the range of the set scale conversion data;
--
--When the number of start coordinate points of device (s2) is less than 0.
--)))
--
--**Example**
--
--[[image:07-5 Basic instructions_html_ba95b2d50d8d1d3e.png]]
--
--[[image:07-5 Basic instructions_html_1de79c7d87d51f78.gif]] When -100 ≤ D0(X) < 0, D100(Y)=
--
--[[image:07-5 Basic instructions_html_9acd6306c6d91847.gif]] When D0(X)=0, D100(Y)=0;
--
--When 0 < D0(X) ≤ 100, D100(Y)=
--
--[[image:07-5 Basic instructions_html_a5b19d1af74a9620.png]]
--
--{{id name="_Toc3776"/}}{{id name="_Toc11170"/}}{{id name="_Toc2957"/}}**SCL2/BIN 16-bit unit scale (X/Y coordinate data)**
--
--[[image:07-5 Basic instructions_html_11b3991e89e21efc.gif]] **SCL2(P)**
--
--The conversion data (16-bit data unit) for scaling specified in (s2) is scaled by the input value specified in (s1), and the operation result is stored in the device specified in (d).
--
---[SCL2 (s1) (s2) (d)]
--
--**Content, range and data type**
--
--|**Parameter**|**Content**|**Range**|**Data type**|**Data type (label)**
--|(s1)|The input value for scaling or the start number of the device storing the input value|-32,768 to 32,767|Signed BIN 16 bit|ANY16_S
--|(s2)|The start number of the device storing conversion data for scaling|-|Signed BIN 16 bit|ANY16_S
--|(d)|The start number of the device that stores the output value controlled by scaling|-|Signed BIN 16 bit|ANY16_S
--
--**Device used**
--
--|(% rowspan="2" %)**Instruction**|(% rowspan="2" %)**Parameter**|(% colspan="24" %)**Devices**|**Offset modification**|(((
--**Pulse**
--
--**extension**
--)))
--|**X**|**Y**|**M**|**S**|**SM**|**T(bit)**|**C(bit)**|**LC(bit)**|**HSC(bit)**|**D.b**|**KnX**|**KnY**|**KnM**|**KnS**|**T**|**C**|**D**|**R**|**SD**|**LC**|**HSC**|**K**|**H**|**E**|**[D]**|**XXP**
--|(% rowspan="3" %)SCL2|Parameter 1| | | | | | | | | | |●|●|●|●|●|●|●|●|●| | |●|●| |●|●
--|Parameter 2| | | | | | | | | | | | | | | | |●|●|●| | | | | |●|●
--|Parameter 3| | | | | | | | | | | |●|●|●|●|●|●|●|●| | | | | |●|●
--
--**Features**
--
--The conversion data (16-bit data unit) for scaling specified in (s2) is scaled by the input value specified in (s1), and the operation result is stored in the device number specified in (d). The scale conversion is performed based on the scale conversion data stored after the device specified in (s2).
--
--|(% colspan="2" %)**Set items (n represents the number of coordinate points specified in (s2))**|**Device allocation**
--|(% colspan="2" %)Coordinate points|(s2)
--|(% rowspan="4" %)X coordinate|Point 1|(s2)+1
--|Point 2|(s2)+2
--|.....|......
--|Point n|(s2)+n
--|(% rowspan="4" %)Y coordinate|Point 1|(s2)+n+1
--|Point 2|(s2)+n+2
--|.....|.....
--|Point n|(s2)+2n
--
--[[image:07-5 Basic instructions_html_80185ccddb878234.png]]
--
--• If the operation result is not an integer value, round the first digit below the decimal point.
--
--• The X coordinate data of the conversion data for scaling should be set in ascending order.
--
--• For (s1), set within the range of the conversion data for scaling ((s2), (s2) + 1 device value).
--
--• If the same X coordinate is specified for multiple points, the Y coordinate value of the second point will be output.
--
--• Set the number of coordinate points of conversion data for scaling within the range of 1 to 32,767.
--
--• Setting example of conversion table for scaling.
--
--In the case of scaling conversion characteristics as shown in the figure below, set it as the following data sheet.
--
--[[image:07-5 Basic instructions_html_74fd22d845ad450e.png]]
--
--|(% colspan="2" rowspan="2" %)**Set items**|(% colspan="3" %)**Set device and content**|(% rowspan="2" %)**Remarks**
--|(% colspan="2" %)**When R0 is specified in (s2)**|**Set content**
--|(% colspan="2" %)Coordinate points|(s2)|R0|K10|
--|(% rowspan="10" %)X coordinate|Point 1|(s2)+1|R1|K5|
--|Point 2|(s2)+2|R2|K20|
--|Point 3|(s2)+3|R3|K50|
--|Point 4|(s2)+4|R4|K200|(% rowspan="3" %)Refer to** ✎1**
--|Point 5|(s2)+5|R5|K200
--|Point 6|(s2)+6|R6|K200
--|Point 7|(s2)+7|R7|K250|
--|Point 8|(s2)+8|R8|K350|(% rowspan="2" %)Refer to** ✎2**
--|Point 9|(s2)+9|R9|K350
--|Point 10|(s2)+10|R10|K400|
--|(% rowspan="10" %)Y coordinate|Point 1|(s2)+11|R11|K7|
--|Point 2|(s2)+12|R12|K30|
--|Point 3|(s2)+13|R13|K100|
--|Point 4|(s2)+14|R14|K25|(% rowspan="3" %)Refer to**✎1**
--|Point 5|(s2)+15|R15|K70
--|Point 6|(s2)+16|R16|K250
--|Point 7|(s2)+17|R17|K90|
--|Point 8|(s2)+18|R18|K90|(% rowspan="2" %)Refer to** ✎2**
--|Point 9|(s2)+19|R19|K30
--|Point 10|(s2)+20|R20|K7|
--
--✎**1** Like points 4, 5, and 6, if the coordinates are specified by 3 points, the intermediate value could be the output value.
--
--In this example, the output value (median value) is specified by the Y coordinate of point 5.
--
--When the X coordinate is the same at 3 or more points, the value of the second point is also output.
--
--✎**2** Like points 8 and 9, if the coordinates are specified by 2 points, the output value is the value of the Y coordinate of next point.
--
--In this example, the output value is specified by the Y coordinate of point 9.
--
--**Error code**
--
--|**Error code**|**Content**
--|4085H|When the specified device range for reading exceeds the range of the corresponding device.
--|4086H|When the specified device range for writing exceeds the range of the corresponding device.
--|4084H|(((
--When the Xn data of data table is not sorted in ascending order. However, the instruction will be executed until the position where the error occurs;
--
--When the input value specified in (s1) exceeds the range of the set scale conversion data;
--
--When the number of start coordinate points of device (s2) is less than 0.
--)))
--
--**Example**
--
--[[image:07-5 Basic instructions_html_ace075fb7675de8e.gif]] [[image:07-5 Basic instructions_html_de529c9a16a62ef0.png]]
--
--When -100 ≤D0 (X) < 0, D100(Y)=
--
--[[image:07-5 Basic instructions_html_9acd6306c6d91847.gif]] when D0(X)=0, D100(Y)=0;
--
--when 0 < D0(X) ≤ 100, D100(Y)=
--
--[[image:07-5 Basic instructions_html_a5b19d1af74a9620.png]]
--
--{{id name="_Toc5608"/}}{{id name="_Toc1756"/}}{{id name="_Toc21402"/}}**DSCL2/BIN 32-bit unit scale (X/Y coordinate data)**
--
--[[image:07-5 Basic instructions_html_11b3991e89e21efc.gif]] **DSCL2(P)**
--
--The conversion data (32-bit data unit) for scaling specified in (s2) is scaled by the input value specified in (s1), and the operation result is stored in the device specified in (d).
--
---[DSCL2 (s1) (s2) (d)]
--
--**Content, range and data type**
--
--|**Parameter**|**Content**|**Range**|**Data type**|**Data type (label)**
--|(s1)|The input value for scaling or the start number of the device storing the input value|-2,147,483,648 to +2,147,483,647|Signed BIN 32 bit|ANY32_S
--|(s2)|The start number of the device storing conversion data for scaling|-|Signed BIN 32 bit|ANY32_S
--|(d)|The start number of the device that stores the output value controlled by scaling|-|Signed BIN 32 bit|ANY32_S
--
--**Device used**
--
--|(% rowspan="2" %)**Instruction**|(% rowspan="2" %)**Parameter**|(% colspan="24" %)**Devices**|**Offset modification**|(((
--**Pulse**
--
--**extension**
--)))
--|**X**|**Y**|**M**|**S**|**SM**|**T(bit)**|**C(bit)**|**LC(bit)**|**HSC(bit)**|**D.b**|**KnX**|**KnY**|**KnM**|**KnS**|**T**|**C**|**D**|**R**|**SD**|**LC**|**HSC**|**K**|**H**|**E**|**[D]**|**XXP**
--|(% rowspan="3" %)DSCL2|Parameter 1| | | | | | | | | | |●|●|●|●|●|●|●|●|●|●|●|●|●| |●|●
--|Parameter 2| | | | | | | | | | | | | | | | |●|●|●| | | | | |●|●
--|Parameter 3| | | | | | | | | | | |●|●|●|●|●|●|●|●|●|●| | | |●|●
--
--**Features**
--
--The conversion data (32-bit data unit) for scaling specified in (s2) is scaled by the input value specified in (s1), and the operation result is stored in the device number specified in (d). The scale conversion is performed based on the scale conversion data stored after the device specified in (s2).
--
--|(% colspan="2" %)**Set items (n represents the number of coordinate points specified in (s2))**|**Device allocation**
--|(% colspan="2" %)Coordinate points|(s2)+1, (s2)
--|(% rowspan="4" %)X coordinate|Point 1|(s2)+3, (s2)+2
--|Point 2|(s2)+5, (s2)+4
--|.....|......
--|Point n|(s2)+2n+1, (s2)+2n
--|(% rowspan="4" %)Y coordinate|Point 1|(s2)+2n+3, (s2)+2n+2
--|Point 2|(s2)+2n+5, (s2)+2n+4
--|.....|.....
--|Point n|(s2)+4n+1, (s2)+4n
--
--[[image:07-5 Basic instructions_html_6633ca18cee1218c.png]]
--
--• If the operation result is not an integer value, round the first digit below the decimal point.
--
--• The X coordinate data of the conversion data for scaling should be set in ascending order.
--
--• For (s1), set within the range of the conversion data for scaling ((s2), (s2) + 1 device value).
--
--• If the same X coordinate is specified for multiple points, the Y coordinate value of the second point will be output.
--
--• Set the number of coordinate points of conversion data for scaling within the range of 1 to 2,147,483,647.
--
--• Setting example of conversion table for scaling.
--
--In the case of scaling conversion characteristics as shown in the figure below, set it as the following data sheet.
--
--[[image:07-5 Basic instructions_html_74fd22d845ad450e.png]]
--
--|(% colspan="2" rowspan="2" %)**Set &nbsp;&nbsp;&nbsp;&nbsp;items**|(% colspan="3" %)**Set device and content**|(% rowspan="2" %)**Remarks**
--|(% colspan="2" %)**When R0 is specified in (s2)**|**Set content**
--|(% colspan="2" %)Coordinate points|(s2)+1, (s2)|R1, R0|K10|
--|(% rowspan="10" %)X|Point 1|(s2)+3, (s2)+2|R3, R2|K5|
--|Point 2|(s2)+5, (s2)+4|R5, R4|K20|
--|Point 3|(s2)+7, (s2)+6|R7, R6|K50|
--|Point 4|(s2)+9, (s2)+8|R9, R8|K200|(% rowspan="3" %)Refer to** ✎1**
--|Point 5|(s2)+11, (s2)+10|R10, R11|K200
--|Point 6|(s2)+13, (s2)+12|R13, R12|K200
--|Point 7|(s2)+15, (s2)+14|R15, R14|K250|
--|Point 8|(s2)+17, (s2)+16|R17, R16|K350|(% rowspan="2" %)Refer to** ✎2**
--|Point 9|(s2)+19, (s2)+18|R19, R18|K350
--|Point 10|(s2)+21, (s2)+20|R21, R20|K400|
--|(% rowspan="10" %)Y coordinate|Point 1|(s2)+23, (s2)+22|R23, R22|K7|
--|Point 2|(s2)+25, (s2)+24|R25, R24|K30|
--|Point 3|(s2)+27, (s2)+26|R27, R26|K100|
--|Point 4|(s2)+29, (s2)+28|R29, R28|K25|(% rowspan="3" %)Refer to** ✎1**
--|Point 5|(s2)+31, (s2)+30|R31, R30|K70
--|Point 6|(s2)+33, (s2)+32|R33, R32|K250
--|Point 7|(s2)+35, (s2)+34|R35, R34|K90|
--|Point 8|(s2)+37, (s2)+36|R37, R36|K90|(% rowspan="2" %)Refer to** ✎2**
--|Point 9|(s2)+39, (s2)+38|R39, R38|K30
--|Point 10|(s2)+41, (s2)+40|R41, R40|K7|
--
--✎**1** Like points 4, 5, and 6, if the coordinates are specified by 3 points, the intermediate value could be the output value.
--
--In this example, the output value (median value) is specified by the Y coordinate of point 5.
--
--When the X coordinate is the same at 3 or more points, the value of the second point is also output.
--
--✎**2** Like points 8 and 9, if the coordinates are specified by 2 points, the output value is the value of the Y coordinate of the next point.
--
--In this example, the output value is specified by the Y coordinate of point 9.
--
--**Error code**
--
--|**Error code**|**Content**
--|4085H|When the specified device range for reading exceeds the range of the corresponding device.
--|4086H|When the specified device range for writing exceeds the range of the corresponding device.
--|4084H|(((
--When the Xn data of data table is not sorted in ascending order. However, the instruction will be executed until the position where the error occurs;
--
--When the input value specified in (s1) exceeds the range of the set scale conversion data;
--
--When the number of start coordinate points of device (s2) is less than 0.
--)))
--
--**Example**
--
--[[image:07-5 Basic instructions_html_91dbc16faa9d2ec3.png]]
--
--When -100 ≤D0(X) < 0, D100(Y)=[[image:/xwiki/bin/download/PLC%20Editor2/1%20User%20manual/2.1%20LX5V%20user%20manual/07-5%20Basic%20instruction/WebHome/07-5%20Basic%20instructions_html_2c96d630f666e72c.gif?rev=1.1||alt="07-5 Basic instructions_html_2c96d630f666e72c.gif"]],,[[image:07-5 Basic instructions_html_2c96d630f666e72c.gif]] ,,;
--
--when D0(X)=0, D100(Y)=0;
--
--when 0< D0(X) ≤ 100, D100(Y)=[[image:/xwiki/bin/download/PLC%20Editor2/1%20User%20manual/2.1%20LX5V%20user%20manual/07-5%20Basic%20instruction/WebHome/07-5%20Basic%20instructions_html_47ebf5cc7733fccc.gif?rev=1.1||alt="07-5 Basic instructions_html_47ebf5cc7733fccc.gif"]],,[[image:07-5 Basic instructions_html_47ebf5cc7733fccc.gif]] ,,.
--
--[[image:07-5 Basic instructions_html_a5b19d1af74a9620.png]]
--
--{{id name="_Toc32057"/}}{{id name="_Toc9941"/}}{{id name="_Toc6492"/}}**ZONE/BIN 16-bit data zone control**
--
--[[image:07-5 Basic instructions_html_11b3991e89e21efc.gif]] **ZONE(P)**
--
--After adding the offset value specified in (s1) or (s2) to the input value specified in (s3), it is stored in the device number specified in (d).
--
---[ZONE (s1) (s2) (s3) (d)]
--
--**Content, range and data type**
--
--|**Parameter**|**Content**|**Range**|**Data type**|**Data type (label)**
--|s1|The negative offset value for addition in the input value|-32,768 to 32,767|BIN16 bit|ANY16_S
--|s2|The positive offset value for addition in the input value|-32,768 to 32,767|BIN16 bit|ANY16_S
--|s3|Input value for zone control`|-32,768 to 32,767|BIN16 bit|ANY16_S
--|d|The start number of the device storing the output value controlled by zone control|-|BIN16 bit|ANY16_S
--
--**Device used**
--
--|(% rowspan="2" %)**Instruction**|(% rowspan="2" %)**Parameter**|(% colspan="24" %)**Devices**|**Offset modification**|(((
--**Pulse**
--
--**extension**
--)))
--|**X**|**Y**|**M**|**S**|**SM**|**T(bit)**|**C(bit)**|**LC(bit)**|**HSC(bit)**|**D.b**|**KnX**|**KnY**|**KnM**|**KnS**|**T**|**C**|**D**|**R**|**SD**|**LC**|**HSC**|**K**|**H**|**E**|**[D]**|**XXP**
--|(% rowspan="4" %)ZONE|Parameter 1| | | | | | | | | | |●|●|●|●|●|●|●|●|●| | |●|●| |●|●
--|Parameter 2| | | | | | | | | | |●|●|●|●|●|●|●|●|●| | |●|●| |●|●
--|Parameter 3| | | | | | | | | | |●|●|●|●|●|●|●|●|●| | | | | |●|●
--|Parameter 4| | | | | | | | | | | |●|●|●|●|●|●|●|●| | | | | |●|●
--
--**Features**
--
--After adding the offset value specified in (s1) or (s2) to the input value (BIN 16-bit value) specified in (s3), it is stored in the device number specified in (d). The offset value is controlled as follows.
--
--|**Condition**|**The value stored in the output value**
--|When input value (s3)<0|Input value (s3) + negative offset value (s1)
--|When input value (s3)=0|0
--|When input value (s3)>0|Input value (s3) + positive offset value (s2)
--
--
--(((
--• When the output value stored in (d) is a signed BIN 16-bit value, and the operation result exceeds the range of -32,768 to 32,767, the situation is shown in the following example.
--
--For example, when (s1) is -100 and (s3) is -32,768,
--
--the output value = -32768+(-100)=8000H-FF9CH=7F9CH=32668.
--
--[[image:07-5 Basic instructions_html_a2adbf9ccf8f839.png]]
--
--
--
--)))
--
--**Error code**
--
--|**Error code**|**Content**
--|4085H|When the specified device range for reading exceeds the range of the corresponding device
--|4086H|When the specified device range for writing exceeds the range of the corresponding device
--
--**Example**
--
--[[image:07-5 Basic instructions_html_5da523c7765bf5be.png]]
--
--When X000 is ON
--
--• When D0<0, the value of (D0)+(-1,000) is stored in D1.
--
--• When D0=0, 0 is stored in D1.
--
--• When 0<D0, the value of (D0)+(1,000) is stored in D1.
--
--{{id name="_Toc28351"/}}{{id name="_Toc11023"/}}{{id name="_Toc30269"/}}**DZONE/BIN 32-bit data zone control**
--
--[[image:07-5 Basic instructions_html_11b3991e89e21efc.gif]] DZONE(P)
--
--After adding the offset value specified in (s1) or (s2) to the input value specified in (s3), it is stored in the device number specified in (d).
--
---[DZONE (s1) (s2) (s3) (d)]
--
--**Content, range and data type**
--
--|**Parameter**|**Content**|**Range**|**Data type**|**Data type (label)**
--|(s1)|The negative offset value for addition in the input value|-2147483648 to 2147483647|BIN32 bit|ANY32_S
--|(s2)|The positive offset value for addition in the input value|-2147483648 to 2147483647|BIN32 bit|ANY32_S
--|(s3)|Input value for zone control|-2147483648 to 2147483647|BIN32 bit|ANY32_S
--|(d)|The start number of the device storing the output value controlled by zone control|-|BIN32 bit|ANY32_S
--
--**Device used**
--
--|(% rowspan="2" %)**Instruction**|(% rowspan="2" %)**Parameter**|(% colspan="24" %)**Devices**|**Offset modification**|(((
--**Pulse**
--
--**extension**
--)))
--|**X**|**Y**|**M**|**S**|**SM**|**T(bit)**|**C(bit)**|**LC(bit)**|**HSC(bit)**|**D.b**|**KnX**|**KnY**|**KnM**|**KnS**|**T**|**C**|**D**|**R**|**SD**|**LC**|**HSC**|**K**|**H**|**E**|**[D]**|**XXP**
--|(% rowspan="4" %)DZONE|Parameter 1| | | | | | | | | | |●|●|●|●|●|●|●|●|●|●|●|●|●| |●|●
--|Parameter 2| | | | | | | | | | |●|●|●|●|●|●|●|●|●|●|●|●|●| |●|●
--|Parameter 3| | | | | | | | | | |●|●|●|●|●|●|●|●|●|●|●| | | |●|●
--|Parameter 4| | | | | | | | | | | |●|●|●|●|●|●|●|●|●|●| | | |●|●
--
--**Features**
--
--After adding the offset value specified in (s1) or (s2) to the input value (BIN 32-bit value) specified in (s3), it is stored in the device number specified in (d). The offset value is controlled as follows.
--
--|**Condition**|**The value stored in the output value**
--|When input value ((s3), (s3)+1)<0|Input value ((s3), (s3)+1) + negative offset value (s1), (s1)+1
--|When input value ((s3), (s3)+1)=0|0
--|When input value ((s3), (s3)+1)>0|Input value ((s3), (s3)+1) + positive offset value (s2), (s2)+1
--
--
--(((
--• When the output value stored in (d) and (d)+1 is a signed BIN 32-bit value, and the operation result exceeds the range of -2,147,483,648 to 2,147,483,647, the situation is shown in the following example.
--
--For example, (s1), (s1)+1 is -1,000, (s3), (s3)+1 is -2,147,483,648, then the output value=-2,147,483,648+(-1000)=80000000H+FFFFFC18H=2,147,482,648.
--
--[[image:07-5 Basic instructions_html_2f3a96a2565c75c7.png]]
--)))
--
--**Error code**
--
--|**Error code**|**Content**
--|4085H|When the specified device range for reading exceeds the range of the corresponding device
--|4086H|When the specified device range for writing exceeds the range of the corresponding device
--
--**Example**
--
--[[image:07-5 Basic instructions_html_b831b14748df07ab.png]]
--
--• When (D1, D0)<0, the value of (D1, D0)+(-10,000) is stored in (D11, D10).
--
--• When (D1, D0)=0, 0 is stored in (D11, D10).
--
--• When 0<(D1, D0), the value of (D1, D0)+10,000 is stored in (D11, D10).
++(% style="text-align:center" %)
++[[image:07-5 Basic instructions_html_f512f36261705953.png||height="48" width="218"]]

Changes for page 12 Clock operation

Summary

Details

Navigation

Table of Contents