Changes for page 12 Clock operation
Last modified by Mora Zhou on 2023/11/21 17:27
Summary
-
Page properties (4 modified, 0 added, 0 removed)
Details
- Page properties
-
- Title
-
... ... @@ -1,0 +1,1 @@ 1 +12 Clock operation instruction - Parent
-
... ... @@ -1,1 +1,1 @@ 1 -PLC Editor2.1 User manual.2\.1 LX5V user manual.WebHome 1 +PLC Editor2.1 User manual.2\.1 LX5V user manual.07.WebHome - Author
-
... ... @@ -1,1 +1,1 @@ 1 -XWiki.J oey1 +XWiki.Jim - Content
-
... ... @@ -1,388 +386,3 @@ 1 -= **Contact comparison instruction** = 2 - 3 -== **Signed 16-bit contact comparison instruction** == 4 - 5 -**LD Β£, AND Β£, OR Β£** 6 - 7 -The BIN 16-bit data of the device specified in (s1) and the BIN 16-bit data of the device specified in (s2) are compared by normal open contact processing. 8 - 9 -LDΒ£: Normally open contact comparison instruction 10 - 11 -ANDΒ£: Normally open contact series connection comparison instruction 12 - 13 -ORΒ£: Normally open contact parallel connection comparison instruction 14 - 15 -**Ladder diagram** 16 - 17 -(% style="text-align:center" %) 18 -[[image:07-5 Basic instructions_html_63210db6b7e1512f.png]] 19 - 20 -(You can enter "=", "<>", ">", "<", ">=", "<=" in "Β£") 21 - 22 -**Content, range and data type** 23 - 24 -|**Parameter**|**Content**|**Range**|**Data type**|**Data type (label)** 25 -|(s1)|Comparison data or device storing comparison data|-32768 to 32767|Signed BIN 16 bit|ANY16_S 26 -|(s2)|Comparison data or device storing comparison data|-32768 to 32767|Signed BIN 16 bit|ANY16_S 27 - 28 -**Device used** 29 - 30 -|(% rowspan="2" %)**Instruction**|(% rowspan="2" %)**Parameter**|(% colspan="11" %)**Devices**|((( 31 -**Offset modification** 32 -)))|((( 33 -**Pulse extension** 34 -))) 35 -|**KnX**|**KnY**|**KnM**|**KnS**|**T**|**C**|**D**|**R**|**SD**|**K**|**H**|**[D]**|**XXP** 36 -|LD=|s1, s2|β|β|β|β|β|β|β|β|β|β|β|β| 37 -|LD>|s1, s2|β|β|β|β|β|β|β|β|β|β|β|β| 38 -|LD<|s1, s2|β|β|β|β|β|β|β|β|β|β|β|β| 39 -|LD>=|s1, s2|β|β|β|β|β|β|β|β|β|β|β|β| 40 -|LD<=|s1, s2|β|β|β|β|β|β|β|β|β|β|β|β| 41 -|LD<>|s1, s2|β|β|β|β|β|β|β|β|β|β|β|β| 42 -|AND=|s1, s2|β|β|β|β|β|β|β|β|β|β|β|β| 43 -|AND>|s1, s2|β|β|β|β|β|β|β|β|β|β|β|β| 44 -|AND<|s1, s2|β|β|β|β|β|β|β|β|β|β|β|β| 45 -|AND>=|s1, s2|β|β|β|β|β|β|β|β|β|β|β|β| 46 -|AND<=|s1, s2|β|β|β|β|β|β|β|β|β|β|β|β| 47 -|AND<>|s1, s2|β|β|β|β|β|β|β|β|β|β|β|β| 48 -|OR=|s1, s2|β|β|β|β|β|β|β|β|β|β|β|β| 49 -|OR>|s1, s2|β|β|β|β|β|β|β|β|β|β|β|β| 50 -|OR<|s1, s2|β|β|β|β|β|β|β|β|β|β|β|β| 51 -|OR>=|s1, s2|β|β|β|β|β|β|β|β|β|β|β|β| 52 -|OR<=|s1, s2|β|β|β|β|β|β|β|β|β|β|β|β| 53 -|OR<>|s1, s2|β|β|β|β|β|β|β|β|β|β|β|β| 54 - 55 -**Features** 56 - 57 -The BIN 16-bit data of the device specified in (s1) and the BIN 16-bit data of the device specified in (s2) are compared by normal open contact processing. 58 - 59 -The comparison operation result of each instruction is shown below. 60 - 61 -|**Instruction Sign**|**Condition**|**Comparison operation result**|**Instruction Sign**|**Condition**|**Comparison operation result** 62 -|==|(s1)=(s2)|(% rowspan="6" %)On state|==|(s1)β (s2)|(% rowspan="6" %)Non-conduction state 63 -|<>|(s1)β (s2)|<>|(s1)=(s2) 64 -|>|(s1)>(s2)|>|(s1)β€(s2) 65 -|<|(s1)<(s2)|<|(s1)β₯(s2) 66 -|>=|(s1)β₯(s2)|>=|(s1)<(s2) 67 -|<=|(s1)β€(s2)|<=|(s1)>(s2) 68 - 69 -**Error code** 70 - 71 -|**Error code**|**Content** 72 -|4085H|(s) read address exceeds the device range 73 - 74 -**Example** 75 - 76 -((( 77 -(1) LDΒ£ instruction: 78 - 79 -(% style="text-align:center" %) 80 -[[image:07-5 Basic instructions_html_1309199eccc7134.png]] 81 -))) 82 - 83 -When the current value of counter C10 is 200, Y10 is set 84 - 85 -When the content of D200 is above -29, and X1 is ON, Y11 is set 86 - 87 -(2) ANDΒ£ instruction: 88 - 89 -(% style="text-align:center" %) 90 -[[image:07-5 Basic instructions_html_1c966f74b0bd808e.png]] 91 - 92 -((( 93 -When X0 is ON, or when the current value of counter C10 is 200, Y10 is set 94 - 95 -When X1 is OFF, and the content of data counter D0 is not -10, Y11 is set 96 - 97 - 98 -))) 99 - 100 -(3) ORΒ£ instruction: 101 - 102 -(% style="text-align:center" %) 103 -[[image:07-5 Basic instructions_html_8b000809015ea436.png]] 104 - 105 -((( 106 -When X1 is ON, or when the current value of counter C10 is 200, Y0 is set 107 - 108 -When X2 and M30 are ON, or the content of register D100 is K10000 and above, M60 is set 109 -))) 110 - 111 -== **Signed 32-bit contact comparison instruction** == 112 - 113 -**LDD Β£, ANDD Β£, ORD Β£** 114 - 115 -The BIN 32-bit data of the device specified in (s1) and the BIN 32-bit data of the device specified in (s2) are compared by normal open contact processing. 116 - 117 -LDDΒ£: Normally open contact comparison command 118 - 119 -ANDDΒ£: Normally open contact series link comparison instruction 120 - 121 -ORDΒ£: Normally open contact parallel link comparison instruction 122 - 123 -**Ladder diagram** 124 - 125 -(% style="text-align:center" %) 126 -[[image:07-5 Basic instructions_html_63210db6b7e1512f.png]] 127 - 128 -β=β, β<>β, β>β, β<β, β>=β, β<=β can be input in βΒ£β 129 - 130 -**Content, range and data type** 131 - 132 -|**Parameter**|**Content**|**Range**|**Data type**|**Data type (label)** 133 -|(s1)|Comparison data or device storing comparison data|-2147483648 to 2147483647|Signed BIN 32 bit|ANY32_S 134 -|(s2)|Comparison data or device storing comparison data|-2147483648 to 2147483647|Signed BIN 32 bit|ANY32_S 135 - 136 -**Device used** 137 - 138 -|(% rowspan="2" %)**Instruction**|(% rowspan="2" %)**Parameter**|(% colspan="13" %)**Devices**|((( 139 -**Offset modification** 140 -)))|((( 141 -**Pulse extension** 142 -))) 143 -|**KnX**|**KnY**|**KnM**|**KnS**|**T**|**C**|**D**|**R**|**SD**|**LC**|**HSC**|**K**|**H**|**[D]**|**XXP** 144 -|LDD=|s1, s2|β|β|β|β|β|β|β|β|β|β|β|β|β|β| 145 -|LDD>|s1, s2|β|β|β|β|β|β|β|β|β|β|β|β|β|β| 146 -|LDD<|s1, s2|β|β|β|β|β|β|β|β|β|β|β|β|β|β| 147 -|LDD>=|s1, s2|β|β|β|β|β|β|β|β|β|β|β|β|β|β| 148 -|LDD<=|s1, s2|β|β|β|β|β|β|β|β|β|β|β|β|β|β| 149 -|LDD<>|s1, s2|β|β|β|β|β|β|β|β|β|β|β|β|β|β| 150 -|ANDD=|s1, s2|β|β|β|β|β|β|β|β|β|β|β|β|β|β| 151 -|ANDD>|s1, s2|β|β|β|β|β|β|β|β|β|β|β|β|β|β| 152 -|ANDD<|s1, s2|β|β|β|β|β|β|β|β|β|β|β|β|β|β| 153 -|ANDD>=|s1, s2|β|β|β|β|β|β|β|β|β|β|β|β|β|β| 154 -|ANDD<=|s1, s2|β|β|β|β|β|β|β|β|β|β|β|β|β|β| 155 -|ANDD<>|s1, s2|β|β|β|β|β|β|β|β|β|β|β|β|β|β| 156 -|ORD=|s1, s2|β|β|β|β|β|β|β|β|β|β|β|β|β|β| 157 -|ORD>|s1, s2|β|β|β|β|β|β|β|β|β|β|β|β|β|β| 158 -|ORD<|s1, s2|β|β|β|β|β|β|β|β|β|β|β|β|β|β| 159 -|ORD>=|s1, s2|β|β|β|β|β|β|β|β|β|β|β|β|β|β| 160 -|ORD<=|s1, s2|β|β|β|β|β|β|β|β|β|β|β|β|β|β| 161 -|ORD<>|s1, s2|β|β|β|β|β|β|β|β|β|β|β|β|β|β| 162 - 163 -**Features** 164 - 165 -The BIN 32-bit data of the device specified in (s1) and the BIN 32-bit data of the device specified in (s2) are compared by normal open contact processing. 166 - 167 -The comparison operation result of each instruction is shown below. 168 - 169 -|**Instruction Sign**|**Condition**|**Comparison operation result**|**Instruction Sign**|**Condition**|**Comparison operation result** 170 -|==|(s1)=(s2)|(% rowspan="6" %)On state|==|(s1)β (s2)|(% rowspan="6" %)Non-conduction state 171 -|<>|(s1)β (s2)|<>|(s1)=(s2) 172 -|>|(s1)>(s2)|>|(s1)β€(s2) 173 -|<|(s1)οΌ(s2)|<|(s1)β₯(s2) 174 -|>=|(s1)β₯(s2)|>=|(s1)οΌ(s2) 175 -|<=|(s1)β€(s2)|<=|(s1)>(s2) 176 - 177 -**Error code** 178 - 179 -|**Error code**|**Content** 180 -|4085H|(S) read address exceeds the device range 181 - 182 -**Example** 183 - 184 -(1) LDDΒ£ instruction: 185 - 186 -(% style="text-align:center" %) 187 -[[image:07-5 Basic instructions_html_8acf0d489297c561.png]] 188 - 189 -When the data of LC10 is 200000, Y10 is set, otherwise Y10 is reset. 190 - 191 -When the 32-bit data composed of D201 and D200 exceeds -5000, and X1 is ON, Y11 is turned ON. 192 - 193 -(2) ANDDΒ£ instruction: 194 - 195 -(% style="text-align:center" %) 196 -[[image:07-5 Basic instructions_html_38be93eec0ced6c.png]] 197 - 198 -When X0 is ON and the value of LC10 is 200000, Y10 is set, otherwise it is reset. 199 - 200 -When X1 is OFF and the 32-bit data composed of D1 and D0 is not equal to K-50000, Y11 is set. 201 - 202 -(3) ORDΒ£ instruction: 203 - 204 -(% style="text-align:center" %) 205 -[[image:07-5 Basic instructions_html_8ebfc7b0562cf370.png]] 206 - 207 -When X1 is ON, or the data of LC10 is equal to the data of LC10 is equal to 200000, Y0 is set. 208 - 209 -When X2 and M30 are set, or the double word data composed of D101 and D100 is greater than or equal to 100000, M60 is set. 210 - 211 -== **Single precision real number contact comparison instruction** == 212 - 213 -**LDE Β£, ANDE Β£, ORE Β£** 214 - 215 -The single precision real number of the device specified in (s1) and the single precision real number of the device specified in (s2) are compared by normal open contact processing. 216 - 217 -LDEΒ£: Normally open contact comparison command 218 - 219 -ANDEΒ£: Normally open contact series link comparison instruction 220 - 221 -OREΒ£: Normally open contact parallel link comparison instruction 222 - 223 -**Ladder diagram** 224 - 225 -(% style="text-align:center" %) 226 -[[image:07-5 Basic instructions_html_6ac28f30e24ad296.png||height="352" width="550"]] 227 - 228 -β=β, β<>β, β>β, β<β, β>=β, β<=β can be input in βΒ£β 229 - 230 -**Content, range and data type** 231 - 232 -|**Parameter**|**Content**|**Range**|**Data type**|**Data type (label)** 233 -|(s1)|Comparison data or the device start number storing the comparison data|0, 2^^-126^^ β€~|(s)~|< 2^^128^^|Single precision real number|ANYREAL_32 234 -|(s2)|Comparison data or the device start number storing the comparison data|0, 2^^-126^^ β€~|(s)~|< 2^^128^^|Single precision real number|ANYREAL_32 235 - 236 -**Device used** 237 - 238 -|(% rowspan="2" %)**Instruction**|(% rowspan="2" %)**Parameter**|(% colspan="8" %)**Devices**|((( 239 -**Offset modification** 240 -)))|((( 241 -**Pulse extension** 242 -))) 243 -|**T**|**C**|**D**|**R**|**SD**|**LC**|**HSC**|**E**|**[D]**|**XXP** 244 -|LDE=|s1, s2|β|β|β|β|β|β|β|β|β| 245 -|LDE>|s1, s2|β|β|β|β|β|β|β|β|β| 246 -|LDE<|s1, s2|β|β|β|β|β|β|β|β|β| 247 -|LDE>=|s1, s2|β|β|β|β|β|β|β|β|β| 248 -|LDE<=|s1, s2|β|β|β|β|β|β|β|β|β| 249 -|LDE<>|s1, s2|β|β|β|β|β|β|β|β|β| 250 -|ANDE=|s1, s2|β|β|β|β|β|β|β|β|β| 251 -|ANDE>|s1, s2|β|β|β|β|β|β|β|β|β| 252 -|ANDE<|s1, s2|β|β|β|β|β|β|β|β|β| 253 -|ANDE>=|s1, s2|β|β|β|β|β|β|β|β|β| 254 -|ANDE<=|s1, s2|β|β|β|β|β|β|β|β|β| 255 -|ANDE<>|s1, s2|β|β|β|β|β|β|β|β|β| 256 -|ORE=|s1, s2|β|β|β|β|β|β|β|β|β| 257 -|ORD>|s1, s2|β|β|β|β|β|β|β|β|β| 258 -|ORE<|s1, s2|β|β|β|β|β|β|β|β|β| 259 -|ORE>=|s1, s2|β|β|β|β|β|β|β|β|β| 260 -|ORE<=|s1, s2|β|β|β|β|β|β|β|β|β| 261 -|ORE<>|s1, s2|β|β|β|β|β|β|β|β|β| 262 - 263 -**Features** 264 - 265 -The single precision real number of the device specified in (s1) and the single precision real number of the device specified in (s2) are compared by normal open contact processing. 266 - 267 -The comparison operation result of each instruction is shown below. 268 - 269 -|**Instruction Sign**|**Condition**|**Comparison operation result**|**Instruction Sign**|**Condition**|**Comparison operation result** 270 -|E=|(s1)=(s2)|(% rowspan="6" %)On state|E=|(s1)β (s2)|(% rowspan="6" %)Non-conduction state 271 -|E<>|(s1)β (s2)|E<>|(s1)=(s2) 272 -|E>|(s1)>(s2)|E>|(s1)β€(s2) 273 -|E<|(s1)οΌ(s2)|E<|(s1)β₯(s2) 274 -|E>=|(s1)β₯(s2)|E>=|(s1)οΌ(s2) 275 -|E<=|(s1)β€(s2)|E<=|(s1)>(s2) 276 - 277 -**Error code** 278 - 279 -|**Error code**|**Content** 280 -|4084H|When the content of the specified device by (s1) and (s2) is an irregular number, a non-number, or Β±β 281 -|4085H|The read address of (s1) and (s2exceeds the device range 282 - 283 -**Example** 284 - 285 -(1) LDEΒ£ instruction: 286 - 287 -(% style="text-align:center" %) 288 -[[image:07-5 Basic instructions_html_c4c820cf59601493.png]] 289 - 290 -When the real number input in D0 is equal to E1.23, Y10 is ON, otherwise Y10 is OFF. 291 - 292 -When the real number in R0 is greater than or equal to the real number in LC0, Y11 is ON, otherwise it is OFF. 293 - 294 -If the input in D0, R0, LC0 is not a real number, it will report H4084 error. 295 - 296 -(2) ANDEΒ£ instruction: 297 - 298 -(% style="text-align:center" %) 299 -[[image:07-5 Basic instructions_html_7cdd2117360e179b.png]] 300 - 301 -Only when M0 is ON and D2 real number is not equal to E1.23 and R2 real number is less than real number LC2 , Y12 is ON, otherwise all are OFF. 302 - 303 -(3) OREΒ£ instruction: 304 - 305 -(% style="text-align:center" %) 306 -[[image:07-5 Basic instructions_html_3eba0bd56176441d.png]] 307 - 308 -When the real number of R4 is less than or equal to the real number of R15, or the real number R6 is equal to the real number R20, Y13 is ON, otherwise Y13 is OFF. 309 - 310 -== **String comparison** == 311 - 312 -**LDSΒ£γANDSΒ£γ ORSΒ£** 313 - 314 -Compare the string stored after the device number specified in (s1) with the string stored after the device number specified in (s2). 315 - 316 -LDSΒ£: String comparison instruction 317 - 318 -ANDSΒ£: String serial connection comparison instruction 319 - 320 -ORSΒ£: String parallel connection comparison instruction 321 - 322 -**Ladder diagram** 323 - 324 -(% style="text-align:center" %) 325 -[[image:07-5 Basic instructions_html_5fb3b3b70645fef5.png||height="371" width="550"]] 326 - 327 -β=β and β<>β could be entered in βΒ£β 328 - 329 -**Content, range and data type** 330 - 331 -|**Parameter**|**Content**|**Range**|**Date type**|**Date type(label)** 332 -|(S1)|Connection data or the device start number storing the data or the string specified directly|-|String|ANYSTRING_SINGLE 333 -|(S1)|Connection data or the device start number storing the data or the string specified directly|-|String|ANYSTRING_SINGLE 334 - 335 -**Device used** 336 - 337 -|(% rowspan="2" %)**Instruction**|(% rowspan="2" %)**Parameter**|(% colspan="9" %)**Devices**|((( 338 -**Offset modification** 339 -)))|((( 340 -**Pulse extension** 341 -))) 342 -|**KnX**|**KnY**|**KnM**|**KnS**|**T**|**C**|**D**|**R**|**SD**|**[D]**|**XXP** 343 -|LDS=|s1γs2|β|β|β|β|β|β|β|β|β|β| 344 -|LDS<>|s1γs2|β|β|β|β|β|β|β|β|β|β| 345 -|ANDS=|s1γs2|β|β|β|β|β|β|β|β|β|β| 346 -|ANDS<>|s1γs2|β|β|β|β|β|β|β|β|β|β| 347 -|ORS=|s1γs2|β|β|β|β|β|β|β|β|β|β| 348 -|ORS<>|s1γs2|β|β|β|β|β|β|β|β|β|β| 349 - 350 -**Features** 351 - 352 -β’ Compare the string stored after the device number specified in (s1) with the string stored after the device number specified in (s2). 353 - 354 -β’ The comparison operation result of each instruction is shown below. 355 - 356 -|**Instruction sign**|**Condition**|**Comparison operation result**|**Instruction sign**|**Condition**|**Comparison operation result** 357 -|==|(s1)οΌ(s2)|(% rowspan="2" %)On stat|==|(s1)β (s2)|(% rowspan="2" %)Non-conduction state 358 -|<>|(s1)β (s2)|<>|(s1)οΌ(s2) 359 - 360 -**Error code** 361 - 362 -|**Error code**|**Content** 363 -|4085H|The read address of (s1) or (s2) exceeds the device range 364 -|408AH|The length of the read string of (s1) or (s2) exceeds, and the continuous length of the string exceeds 400 characters. 365 -|408BH|When (s1) or (s2) reading the string, the maximum range of the device is read but 00H is not found as the end. 366 - 367 -**Example** 368 - 369 -(1) LDSΒ£ instruction: 370 - 371 -(% style="text-align:center" %) 372 -[[image:07-5 Basic instructions_html_449a071f61ff5b58.png]] 373 - 374 -(2) ANDSΒ£ instruction: 375 - 376 -(% style="text-align:center" %) 377 -[[image:07-5 Basic instructions_html_dd6aa995d193bdd2.png]] 378 - 379 -(3) ORSΒ£ instruction: 380 - 381 -(% style="text-align:center" %) 382 -[[image:07-5 Basic instructions_html_4f8fb7c94f87c58d.png]] 383 - 384 -= **Clock operation instruction** = 385 - 386 386 == **TADD/The addition of clock data** == 387 387 388 388 **TADD(P)** ... ... @@ -659,7 +659,7 @@ 659 659 660 660 == **TWR/Clock data writing** == 661 661 662 - [[image:07-5 Basic instructions_html_11b3991e89e21efc.gif]]**TWR(P)**277 +**TWR(P)** 663 663 664 664 Write the clock data of the built-in real-time clock of the CPU module. 665 665 ... ... @@ -672,17 +672,13 @@ 672 672 673 673 **Device used** 674 674 675 -|(% rowspan="2" %)**Instruction**|(% rowspan="2" %)**Parameter**|(% colspan="24" %)**Devices**|((( 676 -**Offset** 677 - 678 -**modification** 290 +|(% rowspan="2" %)**Instruction**|(% rowspan="2" %)**Parameter**|(% colspan="4" %)**Devices**|((( 291 +**Offset modification** 679 679 )))|((( 680 -**Pulse** 681 - 682 -**extension** 293 +**Pulse extension** 683 683 ))) 684 -|** X**|**Y**|**M**|**S**|**SM**|**T(bit)**|**C(bit)**|**LC(bit)**|**HSC(bit)**|**D.b**|**KnX**|**KnY**|**KnM**|**KnS**|**T**|**C**|**D**|**R**|**SD**|**LC**|**HSC**|**K**|**H**|**E**|**[D]**|**XXP**685 -|TWR|Parameter 1| | | | | | | | | | | | | | |β|β|β|β|| | | | | |β|β295 +|**T**|**C**|**D**|**R**|**[D]**|**XXP** 296 +|TWR|Parameter 1|β|β|β|β|β|β 686 686 687 687 **Features** 688 688 ... ... @@ -717,7 +717,7 @@ 717 717 |SD105|The year data of the clock data is stored in a 4-digit BIN code of the Gregorian calendar. 718 718 |SD106|The week data of the clock data is stored in BIN code. (0: day, 1: one, ..., 6: six) are stored in BIN code. 719 719 720 -β**Note** 331 +β**Note:** 721 721 722 722 The device specified in (s) occupies 7 points. Be careful not to overlap with the device used for machine control. 723 723 ... ... @@ -730,13 +730,15 @@ 730 730 731 731 Set D0 date and time to 2020-2-19 12:36:00 in advance 732 732 733 -[[image:07-5 Basic instructions_html_994c66d1a4cbd45f.png]] 344 +(% style="text-align:center" %) 345 +[[image:07-5 Basic instructions_html_994c66d1a4cbd45f.png||height="57" width="305"]] 734 734 735 735 At the moment when the time 12:36:00 arrives, turn on the M0 coil and write the time. 736 736 737 -[[image:07-5 Basic instructions_html_bf3e906ee5265598.png]] 349 +(% style="text-align:center" %) 350 +[[image:07-5 Basic instructions_html_bf3e906ee5265598.png||height="42" width="586"]] 738 738 739 - {{id name="_Toc5357"/}}{{id name="_Toc6196"/}}[[image:07-5Basic instructions_html_11b3991e89e21efc.gif]]**HTOS/16-bit data conversion of time data (hour, minute, second β second)**352 +== **HTOS/16-bit data conversion of time data (hour, minute, second β second)** == 740 740 741 741 **HTOS(P)** 742 742 ... ... @@ -752,26 +752,26 @@ 752 752 753 753 **Device used** 754 754 755 -|(% rowspan="2" %)**Instruction**|(% rowspan="2" %)**Parameter**|(% colspan="24" %)**Devices**|**Offset modification**|((( 756 -**Pulse** 757 - 758 -**extension** 368 +|(% rowspan="2" %)**Instruction**|(% rowspan="2" %)**Parameter**|(% colspan="9" %)**Devices**|**Offset modification**|((( 369 +**Pulse extension** 759 759 ))) 760 -|** X**|**Y**|**M**|**S**|**SM**|**T(bit)**|**C(bit)**|**LC(bit)**|**HSC(bit)**|**D.b**|**KnX**|**KnY**|**KnM**|**KnS**|**T**|**C**|**D**|**R**|**SD**|**LC**|**HSC**|**K**|**H**|**E**|**[D]**|**XXP**761 -|(% rowspan="2" %)HTOS|Parameter 1| | | | | | | | | | |β|β|β|β|β|β|β|β|β|| | | | |β|β762 -|Parameter 2| | | | | | | | | | | |β|β|β|β|β|β|β|β|| | | | |β|β371 +|**KnX**|**KnY**|**KnM**|**KnS**|**T**|**C**|**D**|**R**|**SD**|**[D]**|**XXP** 372 +|(% rowspan="2" %)HTOS|Parameter 1|β|β|β|β|β|β|β|β|β|β|β 373 +|Parameter 2| |β|β|β|β|β|β|β|β|β|β 763 763 764 764 **Features** 765 765 766 766 Convert the time data stored after the device number specified in (s) into seconds and store the conversion result in the device specified in (d). 767 767 768 -[[image:07-5 Basic instructions_html_a84b7741fd5bef2f.png]] 379 +(% style="text-align:center" %) 380 +[[image:07-5 Basic instructions_html_a84b7741fd5bef2f.png||height="130" width="550"]] 769 769 770 770 **Example** 771 771 772 772 When 4 hours, 29 minutes and 31 seconds are specified in (s) 773 773 774 -[[image:07-5 Basic instructions_html_5effb7bc9b8e5cf7.png]] 386 +(% style="text-align:center" %) 387 +[[image:07-5 Basic instructions_html_5effb7bc9b8e5cf7.png||height="162" width="550"]] 775 775 776 776 **Error code** 777 777 ... ... @@ -779,7 +779,7 @@ 779 779 |4085H|When reading the specified device range exceeds the corresponding device range 780 780 |4086H|When writing the specified device range exceeds the corresponding device range 781 781 |4084H|((( 782 - {{id name="OLE_LINK348"/}}When the calculation result is not in the range of 0 to 32767395 +When the calculation result is not in the range of 0 to 32767 783 783 784 784 When the value specified in (s) is not in the range of 0 to 9 785 785 ... ... @@ -788,19 +788,22 @@ 788 788 789 789 **Example** 790 790 791 -[[image:07-5 Basic instructions_html_e23e38c4ba4c34bb.png]] 404 +(% style="text-align:center" %) 405 +[[image:07-5 Basic instructions_html_e23e38c4ba4c34bb.png||height="43" width="338"]] 792 792 793 793 D0 time is set to 5:36:53 794 794 409 +(% style="text-align:center" %) 795 795 [[image:07-5 Basic instructions_html_2866a121e5ca5713.png]] 796 796 797 797 The time of D10 after the M0 coil is turned on is as below. 798 798 414 +(% style="text-align:center" %) 799 799 [[image:07-5 Basic instructions_html_1dd6c5de05890797.png]] 800 800 801 - {{id name="_Toc13431"/}}{{id name="_Toc5278"/}}**DHTOS/32-bit data conversion of time data (hour, minute, second β second)**417 +== **DHTOS/32-bit data conversion of time data (hour, minute, second β second)** == 802 802 803 - [[image:07-5 Basic instructions_html_11b3991e89e21efc.gif]]**DHTOS(P)**419 +**DHTOS(P)** 804 804 805 805 Convert the time data stored after the device number specified in (s) into seconds and store the conversion result as BIN 32-bit data in the device specified in (d). 806 806 ... ... @@ -814,30 +814,28 @@ 814 814 815 815 **Device used** 816 816 817 -|(% rowspan="2" %)**Instruction**|(% rowspan="2" %)**Parameter**|(% colspan="24" %)**Devices**|((( 818 -**Offset** 819 - 820 -**modification** 433 +|(% rowspan="2" %)**Instruction**|(% rowspan="2" %)**Parameter**|(% colspan="9" %)**Devices**|((( 434 +**Offset modification** 821 821 )))|((( 822 -**Pulse** 823 - 824 -**extension** 436 +**Pulse extension** 825 825 ))) 826 -|** X**|**Y**|**M**|**S**|**SM**|**T(bit)**|**C(bit)**|**LC(bit)**|**HSC(bit)**|**D.b**|**KnX**|**KnY**|**KnM**|**KnS**|**T**|**C**|**D**|**R**|**SD**|**LC**|**HSC**|**K**|**H**|**E**|**[D]**|**XXP**827 -|(% rowspan="2" %)DHTOS|Parameter 1| | | | | | | | | | |β|β|β|β|β|β|β|β|β|| | | | |β|β828 -|Parameter 2| | | | | | | | | | | |β|β|β|β|β|β|β|β|| | | | |β|β438 +|**KnX**|**KnY**|**KnM**|**KnS**|**T**|**C**|**D**|**R**|**SD**|**[D]**|**XXP** 439 +|(% rowspan="2" %)DHTOS|Parameter 1|β|β|β|β|β|β|β|β|β|β|β 440 +|Parameter 2| |β|β|β|β|β|β|β|β|β|β 829 829 830 830 **Features** 831 831 832 832 Convert the time data stored after the device number specified in (s) into seconds and store the conversion result in the device specified in (d). 833 833 834 -[[image:07-5 Basic instructions_html_f4be08508575ea01.png]] 446 +(% style="text-align:center" %) 447 +[[image:07-5 Basic instructions_html_f4be08508575ea01.png||height="99" width="550"]] 835 835 836 836 **Example** 837 837 838 838 When 35 hours, 10 minutes and 58 seconds are specified in (s) 839 839 840 -[[image:07-5 Basic instructions_html_5b9ad230ed5e1fd0.png]] 453 +(% style="text-align:center" %) 454 +[[image:07-5 Basic instructions_html_5b9ad230ed5e1fd0.png||height="125" width="550"]] 841 841 842 842 **Error code** 843 843 ... ... @@ -852,17 +852,20 @@ 852 852 853 853 **Example** 854 854 855 -[[image:07-5 Basic instructions_html_ae8ab4379e8bdb91.png]] 469 +(% style="text-align:center" %) 470 +[[image:07-5 Basic instructions_html_ae8ab4379e8bdb91.png||height="45" width="263"]] 856 856 857 857 D0 time is set to 15:33:24 858 858 859 -[[image:07-5 Basic instructions_html_57a15d9e1045e93e.png]] 474 +(% style="text-align:center" %) 475 +[[image:07-5 Basic instructions_html_57a15d9e1045e93e.png||height="41" width="313"]] 860 860 861 861 The second of D10 after the M0 coil is turned on is 862 862 863 -[[image:07-5 Basic instructions_html_194e906b1dc12078.png]] 479 +(% style="text-align:center" %) 480 +[[image:07-5 Basic instructions_html_194e906b1dc12078.png||height="64" width="365"]] 864 864 865 - {{id name="_Ref22686"/}}{{id name="_Toc11231"/}}{{id name="_Toc7401"/}}[[image:07-5 Basic instructions_html_11b3991e89e21efc.gif]]**HOUR/Hour measuring 16-bit**482 +**HOUR/Hour measuring 16-bit** 866 866 867 867 **HOUR(P)** 868 868 ... ... @@ -887,19 +887,15 @@ 887 887 888 888 **Device used** 889 889 890 -|(% rowspan="2" %)**Instruction**|(% rowspan="2" %)**Parameter**|(% colspan="24" %)**Devices**|((( 891 -**Offset** 892 - 893 -**modification** 507 +|(% rowspan="2" %)**Instruction**|(% rowspan="2" %)**Parameter**|(% colspan="17" %)**Devices**|((( 508 +**Offset modification** 894 894 )))|((( 895 -**Pulse** 896 - 897 -**extension** 510 +**Pulse extension** 898 898 ))) 899 -|** X**|**Y**|**M**|**S**|**SM**|**T(bit)**|**C(bit)**|**LC(bit)**|**HSC(bit)**|**D.b**|**KnX**|**KnY**|**KnM**|**KnS**|**T**|**C**|**D**|**R**|**SD**|**LC**|**HSC**|**K**|**H**|**E**|**[D]**|**XXP**900 -|(% rowspan="3" %)HOUR|Parameter 1| | | | | | | | | | |β|β|β|β|β|β|β|β|β|| |β|β| |β|β901 -|Parameter 2| | | | | | | | | | | | | | | | |β|β|β| | | || |β|β902 -|Parameter 3| |β|β|β|β|| | | |β| | | | | | | | | | | | || |β|β512 +|**Y**|**M**|**S**|**SM**|**D.b**|**KnX**|**KnY**|**KnM**|**KnS**|**T**|**C**|**D**|**R**|**SD**|**K**|**H**|**E**|**[D]**|**XXP** 513 +|(% rowspan="3" %)HOUR|Parameter 1| | | | | |β|β|β|β|β|β|β|β|β|β|β| |β|β 514 +|Parameter 2| | | | | | | | | | | |β|β|β| | | |β|β 515 +|Parameter 3|β|β|β|β|β| | | | | | | | | | | | |β|β 903 903 904 904 **Features** 905 905 ... ... @@ -921,7 +921,7 @@ 921 921 922 922 β’ The measurement stops when the current value reaches the 16-bit maximum. To continue the measurement, clear the current value of (d1) to (d1)+1. 923 923 924 -β**Note** 537 +β**Note:** 925 925 926 926 β’ The device specified in (d1) occupies 2 points. Be careful not to overlap with the device used for machine control. 927 927 ... ... @@ -934,15 +934,14 @@ 934 934 |4086H|When writing the specified device range exceeds the corresponding device range 935 935 |4084H|When the value of (s) is negative 936 936 937 - 938 - 939 939 **Example** 940 940 941 -[[image:07-5 Basic instructions_html_7570f8c392470a9f.png]] 552 +(% style="text-align:center" %) 553 +[[image:07-5 Basic instructions_html_7570f8c392470a9f.png||height="45" width="320"]] 942 942 943 943 When M0 = ON, the duration of the state is accumulated, the time is recorded in D0, and the seconds less than 1 hour are recorded in D1. When the accumulated time of D0 reaches 98 hours, the Y0 output state is ON. When the timing conditions are met, after reaching the specified value (K98), the accumulated timing will continue and the reading will continue to increase; the current time value D0 reaches the maximum value of 32767 hours and D1 reaches 3599 seconds, the timing measurement will stop. The current time values D0 and D1 are cleared to 0. 944 944 945 - {{id name="_Toc8523"/}}{{id name="_Toc9364"/}}[[image:07-5Basic instructions_html_11b3991e89e21efc.gif]]**DHOUR/Hour measuring 32 bits**557 +== **DHOUR/Hour measuring 32 bits** == 946 946 947 947 **DHOUR(P)** 948 948 ... ... @@ -954,9 +954,7 @@ 954 954 955 955 |**Parameter**|**Content**|**Range**|**Data type**|**Data type (label)** 956 956 |(s)|((( 957 -The time when the alarm (d2) is turned ON 958 - 959 -(set by one hour) 569 +The time when the alarm (d2) is turned ON (set by one hour) 960 960 )))|0 to 2147483647|Signed BIN 32 bit|ANY32 961 961 |(d1)|Device that stores the current value of measurement (specified data register for power failure retention)|-|Unsigned BIN 32 bit|((( 962 962 ANY32_ARRAY ... ... @@ -967,19 +967,15 @@ 967 967 968 968 **Device used** 969 969 970 -|(% rowspan="2" %)**Instruction**|(% rowspan="2" %)**Parameter**|(% colspan="24" %)**Devices**|((( 971 -**Offset** 972 - 973 -**modification** 580 +|(% rowspan="2" %)**Instruction**|(% rowspan="2" %)**Parameter**|(% colspan="18" %)**Devices**|((( 581 +**Offset modification** 974 974 )))|((( 975 -**Pulse** 976 - 977 -**extension** 583 +**Pulse extension** 978 978 ))) 979 -|** X**|**Y**|**M**|**S**|**SM**|**T(bit)**|**C(bit)**|**LC(bit)**|**HSC(bit)**|**D.b**|**KnX**|**KnY**|**KnM**|**KnS**|**T**|**C**|**D**|**R**|**SD**|**LC**|**HSC**|**K**|**H**|**E**|**[D]**|**XXP**980 -|(% rowspan="3" %)DHOUR|Parameter 1| | | | | | | | | | |β|β|β|β|β|β|β|β|β|β|β|β|β||β|β981 -|Parameter 2| | | | | | | | | | | | | | | | |β|β|β| | | | ||β|β982 -|Parameter 3| |β|β|β|β|| | | |β| | | | | | | | | | | | | ||β|β585 +|**Y**|**M**|**S**|**SM**|**D.b**|**KnX**|**KnY**|**KnM**|**KnS**|**T**|**C**|**D**|**R**|**SD**|**LC**|**HSC**|**K**|**H**|**[D]**|**XXP** 586 +|(% rowspan="3" %)DHOUR|Parameter 1| | | | | |β|β|β|β|β|β|β|β|β|β|β|β|β|β|β 587 +|Parameter 2| | | | | | | | | | | |β|β|β| | | | |β|β 588 +|Parameter 3|β|β|β|β|β| | | | | | | | | | | | | |β|β 983 983 984 984 **Features** 985 985 ... ... @@ -1001,7 +1001,7 @@ 1001 1001 1002 1002 β’ The measurement stops when the current value reaches the 32-bit maximum. To continue the measurement, clear the current value of (d1) to (d1)+2. 1003 1003 1004 -β**Note** 610 +β**Note:** 1005 1005 1006 1006 β’ The device specified in (d1) occupies 3 points. Be careful not to overlap with the device used for machine control. 1007 1007 ... ... @@ -1014,17 +1014,16 @@ 1014 1014 |4086H|When writing the specified device range exceeds the corresponding device range 1015 1015 |4084H|When the value of (s) is negative 1016 1016 1017 - 1018 - 1019 1019 **Example** 1020 1020 1021 -[[image:07-5 Basic instructions_html_3f1ef5ecc835de30.png]] 625 +(% style="text-align:center" %) 626 +[[image:07-5 Basic instructions_html_3f1ef5ecc835de30.png||height="43" width="448"]] 1022 1022 1023 1023 When M0=ON, the duration of this state is accumulated, the time is recorded in D1, D0, and the seconds less than 1 hour are recorded in D2. When the accumulated time of D1, D0 reaches 1000 hours, the Y0 output state is ON. When the timing conditions are met, after reaching the specified value (K1000), the accumulated timing will continue, and the reading will continue to increase; the current time values D1 and D0 reach the maximum value of 2147483647 hours, and when D2 reaches 3599 seconds, the timing measurement will stop and the timing should be restarted. The current time values D0, D1, and D2 must be cleared to 0. 1024 1024 1025 -** {{id name="_Toc11629"/}}STOH/16-bit data conversion of time data (second β hour, minute, second)**630 +== **STOH/16-bit data conversion of time data (second β hour, minute, second)** == 1026 1026 1027 - [[image:07-5 Basic instructions_html_11b3991e89e21efc.gif]]**STOH(P)**632 +**STOH(P)** 1028 1028 1029 1029 Convert the second 16-bit data stored in the device number specified in (s) into hour, minute, and second, and store the conversion result in the device specified in (d) and later. 1030 1030 ... ... @@ -1033,39 +1033,35 @@ 1033 1033 **Content, range and data type** 1034 1034 1035 1035 |**Parameter**|**Content**|**Range**|**Data type**|**Data type (label)** 1036 -|(s)| {{id name="OLE_LINK353"/}}The device start number that stores the clock data before conversion|0 to 32767|Signed BIN 16 bit|ANY16641 +|(s)|The device start number that stores the clock data before conversion|0 to 32767|Signed BIN 16 bit|ANY16 1037 1037 |(d)|The device start number that stores the converted clock data|-|Signed BIN 16 bit|((( 1038 -ANY16_ARRAY 1039 - 1040 -(number of elements: 3) 643 +ANY16_ARRAY (number of elements: 3) 1041 1041 ))) 1042 1042 1043 1043 **Device used** 1044 1044 1045 -|(% rowspan="2" %)**Instruction**|(% rowspan="2" %)**Parameter**|(% colspan="24" %)**Devices**|((( 1046 -**Offset** 1047 - 1048 -**modification** 648 +|(% rowspan="2" %)**Instruction**|(% rowspan="2" %)**Parameter**|(% colspan="9" %)**Devices**|((( 649 +**Offset modification** 1049 1049 )))|((( 1050 -**Pulse** 1051 - 1052 -**extension** 651 +**Pulse extension** 1053 1053 ))) 1054 -|** X**|**Y**|**M**|**S**|**SM**|**T(bit)**|**C(bit)**|**LC(bit)**|**HSC(bit)**|**D.b**|**KnX**|**KnY**|**KnM**|**KnS**|**T**|**C**|**D**|**R**|**SD**|**LC**|**HSC**|**K**|**H**|**E**|**[D]**|**XXP**1055 -|(% rowspan="2" %)STOH|Parameter 1| | | | | | | | | | |β|β|β|β|β|β|β|β|β|| | | | |β|β1056 -|Parameter 2| | | | | | | | | | | |β|β|β|β|β|β|β|β|| | | | |β|β653 +|**KnX**|**KnY**|**KnM**|**KnS**|**T**|**C**|**D**|**R**|**SD**|**[D]**|**XXP** 654 +|(% rowspan="2" %)STOH|Parameter 1|β|β|β|β|β|β|β|β|β|β|β 655 +|Parameter 2| |β|β|β|β|β|β|β|β|β|β 1057 1057 1058 1058 **Features** 1059 1059 1060 1060 Convert the second data stored after the device number specified in (s) into hour, minute, and second, and store the conversion result in the device specified in (d) and later. 1061 1061 1062 -[[image:07-5 Basic instructions_html_1f5f3f1d80af2a34.png]] 661 +(% style="text-align:center" %) 662 +[[image:07-5 Basic instructions_html_1f5f3f1d80af2a34.png||height="110" width="550"]] 1063 1063 1064 1064 **Example** 1065 1065 1066 1066 When 29,011 seconds are specified in (s) 1067 1067 1068 -[[image:07-5 Basic instructions_html_682516cbf773f515.png]] 668 +(% style="text-align:center" %) 669 +[[image:07-5 Basic instructions_html_682516cbf773f515.png||height="163" width="550"]] 1069 1069 1070 1070 **Error code** 1071 1071 ... ... @@ -1076,17 +1076,19 @@ 1076 1076 1077 1077 **Example** 1078 1078 1079 -[[image:07-5 Basic instructions_html_e783349d57adf7d2.png]] 680 +(% style="text-align:center" %) 681 +[[image:07-5 Basic instructions_html_e783349d57adf7d2.png||height="47" width="350"]] 1080 1080 1081 1081 Set D0 seconds to 12537 1082 1082 1083 1083 The hour, minute and second of D10 after the M0 coil is turned on are 1084 1084 1085 -[[image:07-5 Basic instructions_html_d3c33949e8684891.png]] 687 +(% style="text-align:center" %) 688 +[[image:07-5 Basic instructions_html_d3c33949e8684891.png||height="52" width="645"]] 1086 1086 1087 - {{id name="_Toc10764"/}}{{id name="_Toc30243"/}}**DSTOH/32-bit data conversion of time data (second β hour, minute, second)**690 +== **DSTOH/32-bit data conversion of time data (second β hour, minute, second)** == 1088 1088 1089 - [[image:07-5 Basic instructions_html_11b3991e89e21efc.gif]]**DSTOH(P)**692 +**DSTOH(P)** 1090 1090 1091 1091 Convert the second 32-bit data of second stored in the device number specified in (s) into hour, minute, and second, and store the conversion result in the device specified in (d) and later. 1092 1092 ... ... @@ -1097,37 +1097,33 @@ 1097 1097 |**Parameter**|**Content**|**Range**|**Data type**|**Data type (label)** 1098 1098 |(s)|The device start number that stores the clock data before conversion|0 to 117964799|Signed BIN 32 bit|ANY32 1099 1099 |(d)|The device start number that stores the converted clock data|-|Signed BIN 16 bit|((( 1100 -ANY16_ARRAY 1101 - 1102 -(number of elements: 3) 703 +ANY16_ARRAY (number of elements: 3) 1103 1103 ))) 1104 1104 1105 1105 **Device used** 1106 1106 1107 -|(% rowspan="2" %)**Instruction**|(% rowspan="2" %)**Parameter**|(% colspan="24" %)**Devices**|((( 1108 -**Offset** 1109 - 1110 -**modification** 708 +|(% rowspan="2" %)**Instruction**|(% rowspan="2" %)**Parameter**|(% colspan="9" %)**Devices**|((( 709 +**Offset modification** 1111 1111 )))|((( 1112 -**Pulse** 1113 - 1114 -**extension** 711 +**Pulse extension** 1115 1115 ))) 1116 -|** X**|**Y**|**M**|**S**|**SM**|**T(bit)**|**C(bit)**|**LC(bit)**|**HSC(bit)**|**D.b**|**KnX**|**KnY**|**KnM**|**KnS**|**T**|**C**|**D**|**R**|**SD**|**LC**|**HSC**|**K**|**H**|**E**|**[D]**|**XXP**1117 -|(% rowspan="2" %)DSTOH|Parameter 1| | | | | | | | | | |β|β|β|β|β|β|β|β|β|| | | | |β|β1118 -|Parameter 2| | | | | | | | | | | |β|β|β|β|β|β|β|β|| | | | |β|β713 +|**KnX**|**KnY**|**KnM**|**KnS**|**T**|**C**|**D**|**R**|**SD**|**[D]**|**XXP** 714 +|(% rowspan="2" %)DSTOH|Parameter 1|β|β|β|β|β|β|β|β|β|β|β 715 +|Parameter 2| |β|β|β|β|β|β|β|β|β|β 1119 1119 1120 1120 **Features** 1121 1121 1122 1122 Convert the second data stored after the device number specified in (s) into hour, minute, and second, and store the conversion result in the device specified in (d) and later. 1123 1123 1124 -[[image:07-5 Basic instructions_html_cbf13fc3d10fbe61.png]] 721 +(% style="text-align:center" %) 722 +[[image:07-5 Basic instructions_html_cbf13fc3d10fbe61.png||height="99" width="600"]] 1125 1125 1126 1126 **Example** 1127 1127 1128 1128 When 45,325 seconds is specified in (s) 1129 1129 1130 -[[image:07-5 Basic instructions_html_d6045506b13275a0.png]] 728 +(% style="text-align:center" %) 729 +[[image:07-5 Basic instructions_html_d6045506b13275a0.png||height="135" width="600"]] 1131 1131 1132 1132 **Error code** 1133 1133 ... ... @@ -1138,15 +1138,17 @@ 1138 1138 1139 1139 **Example** 1140 1140 1141 -[[image:07-5 Basic instructions_html_e7dd49d953db6da4.png]] 740 +(% style="text-align:center" %) 741 +[[image:07-5 Basic instructions_html_e7dd49d953db6da4.png||height="39" width="316"]] 1142 1142 1143 1143 Set D0 seconds to 2152537 1144 1144 1145 1145 The hour, minute and second of D10 after the M0 coil is turned on are 1146 1146 1147 -[[image:07-5 Basic instructions_html_10d57bde1ac0a218.png]] 747 +(% style="text-align:center" %) 748 +[[image:07-5 Basic instructions_html_10d57bde1ac0a218.png||height="52" width="661"]] 1148 1148 1149 - {{id name="_Toc2937"/}}{{id name="_Toc24209"/}}[[image:07-5Basic instructions_html_11b3991e89e21efc.gif]]**TCMP/Clock data comparison**750 +== **TCMP/Clock data comparison** == 1150 1150 1151 1151 **TCMP(P)** 1152 1152 ... ... @@ -1165,29 +1165,26 @@ 1165 1165 1166 1166 **Device used** 1167 1167 1168 -|(% rowspan="2" %)**Instruction**|(% rowspan="2" %)**Parameter**|(% colspan="24" %)**Devices**|((( 1169 -**Offset** 1170 - 1171 -**modification** 769 +|(% rowspan="2" %)**Instruction**|(% rowspan="2" %)**Parameter**|(% colspan="17" %)**Devices**|((( 770 +**Offset modification** 1172 1172 )))|((( 1173 -**Pulse** 1174 - 1175 -**extension** 772 +**Pulse extension** 1176 1176 ))) 1177 -|** X**|**Y**|**M**|**S**|**SM**|**T(bit)**|**C(bit)**|**LC(bit)**|**HSC(bit)**|**D.b**|**KnX**|**KnY**|**KnM**|**KnS**|**T**|**C**|**D**|**R**|**SD**|**LC**|**HSC**|**K**|**H**|**E**|**[D]**|**XXP**1178 -|(% rowspan="5" %)TCMP|Parameter 1| | | | | | | | | | |β|β|β|β|β|β|β|β|β|| |β|β| |β|β1179 -|Parameter 2| | | | | | | | | | |β|β|β|β|β|β|β|β|β|| |β|β| |β|β1180 -|Parameter 3| | | | | | | | | | |β|β|β|β|β|β|β|β|β|| |β|β| |β|β1181 -|Parameter 4| | | | | | | | | | | | | | |β|β|β|β|β| | | || |β|β1182 -|Parameter 5| |β|β|β|β|| | | |β| | | | | | | | | | | | || |β|β774 +|**Y**|**M**|**S**|**SM**|**D.b**|**KnX**|**KnY**|**KnM**|**KnS**|**T**|**C**|**D**|**R**|**SD**|**K**|**H**|**E**|**[D]**|**XXP** 775 +|(% rowspan="5" %)TCMP|Parameter 1| | | | | |β|β|β|β|β|β|β|β|β|β|β| |β|β 776 +|Parameter 2| | | | | |β|β|β|β|β|β|β|β|β|β|β| |β|β 777 +|Parameter 3| | | | | |β|β|β|β|β|β|β|β|β|β|β| |β|β 778 +|Parameter 4| | | | | | | | | |β|β|β|β|β| | | |β|β 779 +|Parameter 5|β|β|β|β|β| | | | | | | | | | | | |β|β 1183 1183 1184 1184 **Features** 1185 1185 1186 1186 Compare the time of the reference time (hour, minute, second) [(s1), (s2), (s3)] with the time data (hour, minute, second) [(s4), (s4)+1, (s4) +2] Compare the size and turn on/off the 3 points from (d) according to the result of the same size. 1187 1187 1188 -[[image:07-5 Basic instructions_html_5df7ad3057fada12.png]] 785 +(% style="text-align:center" %) 786 +[[image:07-5 Basic instructions_html_5df7ad3057fada12.png||height="385" width="750"]] 1189 1189 1190 -β**Note** 788 +β**Note:** 1191 1191 1192 1192 The device specified in (s4) and (d) occupies 3 points. Be careful not to overlap with the device used for machine control. 1193 1193 ... ... @@ -1201,26 +1201,29 @@ 1201 1201 |4084H|((( 1202 1202 When the value specified in (s) and (s4) is not in the range of 0 to 23 1203 1203 1204 - {{id name="OLE_LINK355"/}}When the value specified in (s2),(s3) (s4)+1 and (s4)+2 is not in the range of 0 to 59802 +When the value specified in (s2),(s3) (s4)+1 and (s4)+2 is not in the range of 0 to 59 1205 1205 ))) 1206 1206 1207 1207 **Example** 1208 1208 1209 -[[image:07-5 Basic instructions_html_fcc16317cf7c0700.png]] 807 +(% style="text-align:center" %) 808 +[[image:07-5 Basic instructions_html_fcc16317cf7c0700.png||height="68" width="359"]] 1210 1210 1211 1211 Set D10 to 1, D11 to 30, D12 to 0 1212 1212 1213 1213 When M0 is turned on, the time that D23 will come is 0:31:27 1214 1214 1215 -[[image:07-5 Basic instructions_html_de97dd7a612b2323.png]] 814 +(% style="text-align:center" %) 815 +[[image:07-5 Basic instructions_html_de97dd7a612b2323.png||height="50" width="653"]] 1216 1216 1217 1217 M10 is turned ON 1218 1218 1219 -[[image:07-5 Basic instructions_html_56e2d606adc09fd.png]] 819 +(% style="text-align:center" %) 820 +[[image:07-5 Basic instructions_html_56e2d606adc09fd.png||height="52" width="239"]] 1220 1220 1221 - {{id name="_Toc29031"/}}{{id name="_Toc22923"/}}**TZCP/Clock data bandwidth comparison**822 +== **TZCP/Clock data bandwidth comparison** == 1222 1222 1223 - [[image:07-5 Basic instructions_html_11b3991e89e21efc.gif]]**TZCP(P)**824 +**TZCP(P)** 1224 1224 1225 1225 Compare the comparison time of the high and low points specified in (s1) and (s2) with the time data specified in (s3), and turn the bit device specified in (d) ON/OFF according to its size and bandwidth. 1226 1226 ... ... @@ -1230,46 +1230,37 @@ 1230 1230 1231 1231 |**Parameter**|**Content**|**Range**|**Data type**|**Data type (label)** 1232 1232 |(s1)|Specify the "hour" of the lower limit time (hour, minute, second)|-|Signed BIN 16 bit|((( 1233 -ANY16_ARRAY 1234 - 1235 -(number of elements: 3) 834 +ANY16_ARRAY (number of elements: 3) 1236 1236 ))) 1237 1237 |(s2)|Specify the "hour" of the lower limit time (hour, minute, second)|-|Signed BIN 16 bit|((( 1238 -ANY16_ARRAY 1239 - 1240 -(number of elements: 3) 837 +ANY16_ARRAY (number of elements: 3) 1241 1241 ))) 1242 1242 |(s3)|Specify "hour" of time data (hour, minute, second)|-|Signed BIN 16 bit|((( 1243 -ANY16_ARRAY 1244 - 1245 -(number of elements: 3) 840 +ANY16_ARRAY (number of elements: 3) 1246 1246 ))) 1247 1247 |(d)|The bit device is turned ON/OFF according to the comparison result.|-|Bit|((( 1248 -ANY16_ARRAY 1249 - 1250 -(number of elements: 3) 843 +ANY16_ARRAY (number of elements: 3) 1251 1251 ))) 1252 1252 1253 1253 **Device used** 1254 1254 1255 -|(% rowspan="2" %)**Instruction**|(% rowspan="2" %)**Parameter**|(% colspan="24" %)**Devices**|**Offset modification**|((( 1256 -**Pulse** 1257 - 1258 -**extension** 848 +|(% rowspan="2" %)**Instruction**|(% rowspan="2" %)**Parameter**|(% colspan="10" %)**Devices**|**Offset modification**|((( 849 +**Pulse extension** 1259 1259 ))) 1260 -|** X**|**Y**|**M**|**S**|**SM**|**T(bit)**|**C(bit)**|**LC(bit)**|**HSC(bit)**|**D.b**|**KnX**|**KnY**|**KnM**|**KnS**|**T**|**C**|**D**|**R**|**SD**|**LC**|**HSC**|**K**|**H**|**E**|**[D]**|**XXP**1261 -|(% rowspan="4" %)TZCP|Parameter 1| | | | | | | | | | | | | | |β|β|β|β|β|| | | | |β|β1262 -|Parameter 2| | | | | | | | | | | | | | |β|β|β|β|β|| | | | |β|β1263 -|Parameter 3| | | | | | | | | | | | | | |β|β|β|β|β|| | | | |β|β1264 -|Parameter 4| |β|β|β|β|| | | |β| | | | | || | | | | | | | |β|β851 +|**Y**|**M**|**S**|**SM**|**D.b**|**T**|**C**|**D**|**R**|**SD**|**[D]**|**XXP** 852 +|(% rowspan="4" %)TZCP|Parameter 1| | | | | |β|β|β|β|β|β|β 853 +|Parameter 2| | | | | |β|β|β|β|β|β|β 854 +|Parameter 3| | | | | |β|β|β|β|β|β|β 855 +|Parameter 4|β|β|β|β|β| | | | | |β|β 1265 1265 1266 1266 **Features** 1267 1267 1268 1268 Compare the comparison time of the high and low points specified in (s1) and (s2) with the time data specified in (s3), and turn the bit device specified in (d) ON/OFF according to its size and bandwidth. 1269 1269 1270 -[[image:07-5 Basic instructions_html_844291270080313d.png]] 861 +(% style="text-align:center" %) 862 +[[image:07-5 Basic instructions_html_844291270080313d.png||height="339" width="750"]] 1271 1271 1272 -β**Note** 864 +β**Note:** 1273 1273 1274 1274 β’ The devices specified in (s1), (s2), (s3), (d) occupy 3 points. Be careful not to overlap with the device used for machine control. 1275 1275 ... ... @@ -1290,1176 +1290,23 @@ 1290 1290 1291 1291 **Example** 1292 1292 1293 -[[image:07-5 Basic instructions_html_30027a2387c26c2e.png]] 885 +(% style="text-align:center" %) 886 +[[image:07-5 Basic instructions_html_30027a2387c26c2e.png||height="46" width="439"]] 1294 1294 1295 1295 Set D0 time to 16:30:00 and D10 time to 4:30:0 1296 1296 1297 -[[image:07-5 Basic instructions_html_c64e0faf2af172f8.png]] 890 +(% style="text-align:center" %) 891 +[[image:07-5 Basic instructions_html_c64e0faf2af172f8.png||height="49" width="626"]] 1298 1298 1299 -[[image:07-5 Basic instructions_html_66e3a2eadeb2ecbb.png]] 893 +(% style="text-align:center" %) 894 +[[image:07-5 Basic instructions_html_66e3a2eadeb2ecbb.png||height="50" width="625"]] 1300 1300 1301 1301 After the coil is turned on, the reading time to D20 time is 8:30:00 1302 1302 1303 -[[image:07-5 Basic instructions_html_75c44dad07eaf80a.png]] 898 +(% style="text-align:center" %) 899 +[[image:07-5 Basic instructions_html_75c44dad07eaf80a.png||height="49" width="625"]] 1304 1304 1305 1305 M0/M12 is ON 1306 1306 1307 -[[image:07-5 Basic instructions_html_f512f36261705953.png]] 1308 - 1309 -{{id name="_Toc6129"/}}[[image:07-5 Basic instructions_html_a2e3294e01b2f206.gif]] **7.13 Data control instructions** 1310 - 1311 -{{id name="_Toc3339"/}}{{id name="_Toc27829"/}}{{id name="_Toc9204"/}}**BAND/BIN 16-bit data dead zone control** 1312 - 1313 -[[image:07-5 Basic instructions_html_11b3991e89e21efc.gif]] **BAND(P)** 1314 - 1315 -The input value (BIN 16-bit value) specified in (s3) controls the output value stored in the device specified in (d) according to the upper and lower limits of the dead zone specified in (s1) and (s2). 1316 - 1317 --[BAND (s1) (s2) (S3) (d)] 1318 - 1319 -**Content, range and data type** 1320 - 1321 -|**Parameter**|**Content**|**Range**|**Data type**|**Data type (label)** 1322 -|(s1)|Lower limit of dead zone (no output zone)|-32,768 to +32,767|Signed BIN 16 bit|ANY16_S 1323 -|(s2)|Upper limit of dead zone (no output zone)|-32,768 to +32,767|Signed BIN 16 bit|ANY16_S 1324 -|(S3)|Input value controlled by dead zone control|-32768 to +32,767|Signed BIN 16 bit|ANY16_S 1325 -|(D)|The start number of the device that stores the output value controlled by the dead zone control|-|Signed BIN 16 bit|ANY16_S 1326 - 1327 -**Device used** 1328 - 1329 -|(% rowspan="2" %)**Instruction**|(% rowspan="2" %)**Parameter**|(% colspan="24" %)**Devices**|((( 1330 -**Offset** 1331 - 1332 -**modification** 1333 -)))|((( 1334 -**Pulse** 1335 - 1336 -**extension** 1337 -))) 1338 -|**X**|**Y**|**M**|**S**|**SM**|**T(bit)**|**C(bit)**|**LC(bit)**|**HSC(bit)**|**D.b**|**KnX**|**KnY**|**KnM**|**KnS**|**T**|**C**|**D**|**R**|**SD**|**LC**|**HSC**|**K**|**H**|**E**|**[D]**|**XXP** 1339 -|(% rowspan="4" %)BAND|Parameter 1| | | | | | | | | | |β|β|β|β|β|β|β|β|β| | |β|β| |β|β 1340 -|Parameter 2| | | | | | | | | | |β|β|β|β|β|β|β|β|β| | |β|β| |β|β 1341 -|Parameter 3| | | | | | | | | | |β|β|β|β|β|β|β|β|β| | | | | |β|β 1342 -|Parameter 4| | | | | | | | | | | |β|β|β|β|β|β|β|β| | | | | |β|β 1343 - 1344 -**Features** 1345 - 1346 -The input value (BIN 16-bit value) specified in (s3) controls the output value stored in the device specified in (d) according to the upper and lower limits of the dead zone specified in (s1) and (s2). The output value is controlled as follows. 1347 - 1348 -|**Condition**|**The value stored in the output value** 1349 -|When dead zone low limit (s1)> input value (s3)|Input value (s3)-Dead zone low limit (s1) 1350 -|When dead zone high limit (s1) <input value (s3)|Input value (s3)- Dead zone high limit (s2) 1351 -|When dead zone low limit (s1) β€ input value (s3) β€ dead zone low limit (s2)|0 1352 - 1353 - 1354 -((( 1355 -β’When the output value stored in (d) is a signed BIN 16-bit value, and the operation result exceeds the range of -32768 to 32767, the situation is shown in the following example. 1356 - 1357 -For example, when (s1) is 10 and (s3) is -32768, 1358 - 1359 -the output value = -32768-10=8000H-000AH=7FFFH=32758. 1360 - 1361 -[[image:07-5 Basic instructions_html_6850e21a76b813c0.png]] 1362 -))) 1363 - 1364 -**Error code** 1365 - 1366 -|**Error code**|**Content** 1367 -|4085H|When the specified device range for reading exceeds the range of the corresponding device. 1368 -|4086H|When the specified device range for writing exceeds the range of the corresponding device. 1369 -|4084H|When the low limit specified in (s1) is greater than the high limit specified in (s2). 1370 - 1371 -**Example ** 1372 - 1373 -[[image:07-5 Basic instructions_html_c0e65cfeed403ecf.png]] 1374 - 1375 -When X000 is ON, when D0<(-1,000), the value of ( D0)-(-1,000) is stored in (D1). 1376 - 1377 -β’ When -1,000β¦ D0β¦1,000, 0 is stored in D1. 1378 - 1379 -β’ When D0<1,000, the value of (D0)-1,000 is stored in D1. 1380 - 1381 -{{id name="_Toc1180"/}}{{id name="_Toc21657"/}}{{id name="_Toc27323"/}}[[image:07-5 Basic instructions_html_11b3991e89e21efc.gif]] **DBAND/BIN 32-bit data dead zone control** 1382 - 1383 -**DBAND(P)** 1384 - 1385 -The input value (BIN 32-bit value) specified in (s3) controls the output value stored in the device specified in (d) according to the upper and lower limits of the dead zone specified in (s1) and (s2). 1386 - 1387 --[DBAND (s1) (s2) (S3) (d)] 1388 - 1389 -**Content, range and data type** 1390 - 1391 -|**Parameter**|**Content**|**Range**|**Data type**|**Data type (label)** 1392 -|(s1)|Dead zone low limit (no output zone)|-2,147,483,648 to +2,147,483,647|Signed BIN 32 bit|ANY32_S 1393 -|(s2)|Dead zone high limit (no output zone)|-2,147,483,648 to +2,147,483,647|Signed BIN 32 bit|ANY32_S 1394 -|(S3)|Input value controlled by dead zone control|-2,147,483,648 to +2,147,483,647|Signed BIN 32 bit|ANY32_S 1395 -|(d)|The start number of the device that stores the output value controlled by the dead zone control|-|Signed BIN 32 bit|ANY32_S 1396 - 1397 -**Device used** 1398 - 1399 -|(% rowspan="2" %)**Instruction**|(% rowspan="2" %)**Parameter**|(% colspan="24" %)**Devices**|**Offset modification**|((( 1400 -**Pulse** 1401 - 1402 -**extension** 1403 -))) 1404 -|**X**|**Y**|**M**|**S**|**SM**|**T(bit)**|**C(bit)**|**LC(bit)**|**HSC(bit)**|**D.b**|**KnX**|**KnY**|**KnM**|**KnS**|**T**|**C**|**D**|**R**|**SD**|**LC**|**HSC**|**K**|**H**|**E**|**[D]**|**XXP** 1405 -|(% rowspan="4" %)DBAND|Parameter 1| | | | | | | | | | |β|β|β|β|β|β|β|β|β|β|β|β|β| |β|β 1406 -|Parameter 2| | | | | | | | | | |β|β|β|β|β|β|β|β|β|β|β|β|β| |β|β 1407 -|Parameter 3| | | | | | | | | | |β|β|β|β|β|β|β|β|β|β|β| | | |β|β 1408 -|Parameter 4| | | | | | | | | | | |β|β|β|β|β|β|β|β|β|β| | | |β|β 1409 - 1410 -**Features** 1411 - 1412 -The input value (BIN 32-bit value) specified in (s3) controls the output value stored in the device specified in (d) according to the upper and lower limits of the dead zone specified in (s1) and (s2). The output value is controlled as follows. 1413 - 1414 -|**Condition**|**The value stored in the output value** 1415 -|When dead zone low limit ((s1), (s1)+1)> input value ((s3), (s3)+1)|{{id name="OLE_LINK42"/}}Input value ((s3), (s3)+1)-dead zone low limit ((s1), (s1)+1) 1416 -|When dead zone high limit ((s1), (s1)+1) <input value ((s3), (s3)+1)|{{id name="OLE_LINK357"/}}Input value ((s3), (s3)+1)-dead zone high limit ((s2), (s2)+1) 1417 -|When dead zone low limit ((s1), (s1)+1) β€ input value ((s3), (s3)+1) β€ dead zone high limit ((s2), (s2)+1)|0 1418 - 1419 - 1420 -((( 1421 -β’ When the output value stored in (d) is a signed BIN 32-bit value, and the operation result exceeds the range of -2,147,483,648 to 2,147,483,647, the situation is as the following example. For example,**Β **When (s1) and (s1)+1 are 1000, (s3) and (s3)+1 are -2,147,483,648, then the output value= 1422 - 1423 --2,147,483,648-1000=80000000H-000003E8H=7FFFFC18H=2,147,482,648. 1424 - 1425 -[[image:07-5 Basic instructions_html_e0144674dad3e8fd.png]] 1426 - 1427 - 1428 - 1429 -))) 1430 - 1431 -**Error code** 1432 - 1433 -|**Error code**|**Content** 1434 -|4085H|When the specified device range for reading exceeds the range of the corresponding device. 1435 -|4086H|When the specified device range for writing exceeds the range of the corresponding device. 1436 -|4084H|When the low limit specified in (s1) is greater than the high limit specified in (s2). 1437 - 1438 -**Example** 1439 - 1440 -[[image:07-5 Basic instructions_html_88f3fe0fb4841bab.png]] 1441 - 1442 -β’ When (D1, D0)<(-10,000), the value of (D1, D0)-(-10,000) is stored in (D11, D10). 1443 - 1444 -β’ When -10,000β¦(D1, D0)β¦10,000, 0 is stored in (D11, D10). 1445 - 1446 -β’ When 10,000< (D1, D0), the value of (D1, D0)-10,000 is stored in D1. 1447 - 1448 -{{id name="_Toc21668"/}}{{id name="_Toc25056"/}}{{id name="_Toc17582"/}}{{id name="OLE_LINK165"/}}**BINDA/BIN 16-bit data β Decimal ASCII conversion** 1449 - 1450 -[[image:07-5 Basic instructions_html_11b3991e89e21efc.gif]] **BINDA(P)** 1451 - 1452 -Convert the BIN 16-bit data specified in (s) and the value of each digit in decimal numbers into ASCII codes and store them after the device number specified in (d). 1453 - 1454 --[BINDA(s)(d)] 1455 - 1456 -**Content, range and data type** 1457 - 1458 -|**Parameter**|**Content**|**Range**|**Data type**|**Data type (label)** 1459 -|(s)|BIN data for ASCII conversion|-32768 to +32767|Signed BIN 16 bit|ANY16_S 1460 -|(d)|The start number of the device storing the conversion result|-|String|ANYSTRING_SINGLE 1461 - 1462 -**Device used** 1463 - 1464 -|(% rowspan="2" %)**Instruction**|(% rowspan="2" %)**Parameter**|(% colspan="24" %)**Devices**|**Offset modification**|((( 1465 -**Pulse** 1466 - 1467 -**extension** 1468 -))) 1469 -|**X**|**Y**|**M**|**S**|**SM**|**T(bit)**|**C(bit)**|**LC(bit)**|**HSC(bit)**|**D.b**|**KnX**|**KnY**|**KnM**|**KnS**|**T**|**C**|**D**|**R**|**SD**|**LC**|**HSC**|**K**|**H**|**E**|**[D]**|**XXP** 1470 -|(% rowspan="2" %)BINDA|Parameter 1| | | | | | | | | | |β|β|β|β|β|β|β|β|β| | |β|β| |β|β 1471 -|Parameter 2| | | | | | | | | | | | | | | | |β|β|β| | | | | |β|β 1472 - 1473 -**Features** 1474 - 1475 -Convert the BIN 16-bit data specified in (s) and the value of each digit in decimal numbers into ASCII codes and store them after the device number specified in (d). 1476 - 1477 - 1478 - 1479 -((( 1480 -βOnly store 0 when SM191 is OFF 1481 - 1482 -[[image:07-5 Basic instructions_html_57bda5f08026449d.png]] 1483 -))) 1484 - 1485 -For example, when -12,345 is specified in (s) (in the case of specifying signed) 1486 - 1487 -[[image:07-5 Basic instructions_html_f346102467b9bef9.png]] 1488 - 1489 -The calculation result stored in (d) will be as below. 1490 - 1491 -β’ In "Sign", 20H is stored when the BIN data is positive, and 2DH is stored when it is negative. 1492 - 1493 -β’ In the 0 to the left of the effective digit, 20H is stored. (Suppress 0.) For example, in the case of "00325", "00" becomes 20H, and "325" becomes the effective digit. 1494 - 1495 -β’ When storing data to the device specified in (d)+3, when SM191 (output character number switching signal) is OFF, 0 is stored, and it does not change when it is ON. 1496 - 1497 -β**Note: **The number of occupied points of (d) is 3 when SM191 is ON, and it is 4 when SM191 is OFF. 1498 - 1499 -**Error code** 1500 - 1501 -|**Error code**|**Content** 1502 -|4085H|The read address of (s) exceeds the device range. 1503 -|4086H|The write address of (d) exceeds the device range. 1504 - 1505 -**Example** 1506 - 1507 - 1508 - 1509 -((( 1510 -When X000 is ON, convert the value of 16-bit data (BIN) D1000 into decimal ASCII code, and then use PR instruction to output the 1511 - 1512 -converted ASCII code character by character to the program of Y040 to Y057. 1513 - 1514 -[[image:07-5 Basic instructions_html_c598806a42484ed.png]] 1515 -))) 1516 - 1517 -{{id name="_Toc12255"/}}{{id name="_Toc8216"/}}{{id name="_Toc470"/}}**DBINDA/BIN 32-bit data β Decimal ASCII conversion** 1518 - 1519 -[[image:07-5 Basic instructions_html_11b3991e89e21efc.gif]] **DBINDA(P)** 1520 - 1521 -Convert the BIN 32-bit data specified in (s) and the value of each bit in decimal numbers into ASCII codes and store them after the device number specified in (d). 1522 - 1523 --[DBINDA(s)(d)] 1524 - 1525 -**Content, range and data type** 1526 - 1527 -|**Parameter**|**Content**|**Range**|**Data type**|**Data type (label)** 1528 -|(s)|BIN data for ASCII conversion|-2,147483648 to 2147483647|Signed BIN 32 bit|ANY32_S 1529 -|(d)|{{id name="OLE_LINK2"/}}The start number of the device storing the conversion result|-|String|ANYSTRING_SINGLE 1530 - 1531 -**Device used** 1532 - 1533 -|(% rowspan="2" %)**Instruction**|(% rowspan="2" %)**Parameter**|(% colspan="24" %)**Devices**|((( 1534 -**Offset** 1535 - 1536 -**modification** 1537 -)))|((( 1538 -**Pulse** 1539 - 1540 -**extension** 1541 -))) 1542 -|**X**|**Y**|**M**|**S**|**SM**|**T(bit)**|**C(bit)**|**LC(bit)**|**HSC(bit)**|**D.b**|**KnX**|**KnY**|**KnM**|**KnS**|**T**|**C**|**D**|**R**|**SD**|**LC**|**HSC**|**K**|**H**|**E**|**[D]**|**XXP** 1543 -|(% rowspan="2" %)DBINDA|Parameter 1| | | | | | | | | | |β|β|β|β|β|β|β|β|β|β|β|β|β| |β|β 1544 -|Parameter 2| | | | | | | | | | | | | | | | |β|β|β| | | | | |β|β 1545 - 1546 -**Features** 1547 - 1548 -Convert the BIN 32-bit data specified in (s) and the value of each bit when expressed in decimal numbers into ASCII codes, and store them after the device number specified in (d). 1549 - 1550 -For example, when -12345678 is specified in (s). (in the case of specifying signed) 1551 - 1552 -[[image:07-5 Basic instructions_html_4d939462838cf09b.gif]] The calculation result stored in (d) will be as below. 1553 - 1554 -β’ In "Sign", 20H is stored when the BIN data is positive, and 2DH is stored when it is negative. 1555 - 1556 -β’ 20H is stored at 0 to the left of the effective number of digits. (Suppress 0.) For example, in the case of "0012034560", "00" becomes 20H, and "12034560" becomes effective digits. 1557 - 1558 -β’ For the data stored in the upper 8 bits of the device specified in (d)+5, 0 will be stored when SM191 (output character switching signal) is OFF, and 20H will be stored when it is ON. 1559 - 1560 -β**Note: **(d) Occupies 6 points. 1561 - 1562 -**Error code** 1563 - 1564 -|**Error code**|**Content** 1565 -|4085H|(s) read address exceeds the device range 1566 -|4086H|(d) write address exceeds the device range 1567 - 1568 -**Example** 1569 - 1570 -[[image:07-5 Basic instructions_html_ec8ac32d748a991c.png]] 1571 - 1572 -When X000 is ON, convert the value of 32-bit data (BIN) D1000 into decimal ASCII code, and then use PR (FNC 77) instruction to output the converted ASCII code character by character to the program in Y040 to Y051 in time and time division. 1573 - 1574 -{{id name="_Toc19693"/}}{{id name="_Toc18078"/}}{{id name="_Toc5726"/}}**DABIN/Decimal ASCII β BIN conversion** 1575 - 1576 -[[image:07-5 Basic instructions_html_11b3991e89e21efc.gif]] **DABIN(P)** 1577 - 1578 -Digital ASCII code (30H to 39H) is a instruction to convert real data into BIN data. 1579 - 1580 --[DABIN (s) (d)] 1581 - 1582 -**Content, range and data type** 1583 - 1584 -|**Parameter**|**Content**|**Range**|**Data type**|**Data type (label)** 1585 -|(s)|The start number of the device that stores the data (ASCII code) to be converted into a BIN value|-|String|ANYSTRING_SINGLE 1586 -|(d)|The device number for storing conversion result|-|BIN16 bit|ANY16_S 1587 - 1588 -**Device used** 1589 - 1590 -|(% rowspan="2" %)**Instruction**|(% rowspan="2" %)**Parameter**|(% colspan="24" %)**Devices**|**Offset modification**|((( 1591 -**Pulse** 1592 - 1593 -**extension** 1594 -))) 1595 -|**X**|**Y**|**M**|**S**|**SM**|**T(bit)**|**C(bit)**|**LC(bit)**|**HSC(bit)**|**D.b**|**KnX**|**KnY**|**KnM**|**KnS**|**T**|**C**|**D**|**R**|**SD**|**LC**|**HSC**|**K**|**H**|**E**|**[D]**|**XXP** 1596 -|(% rowspan="2" %)DABIN|Parameter 1| | | | | | | | | | | | | | | | |β|β|β| | | | | |β|β 1597 -|Parameter 2| | | | | | | | | | | |β|β|β|β|β|β|β|β| | | | | |β|β 1598 - 1599 -**Features** 1600 - 1601 -The decimal ASCII data stored after the device number specified in (s) is converted into BIN 16-bit data and stored in the device specified in (d). 1602 - 1603 -[[image:07-5 Basic instructions_html_22c5cb32a0a32214.png]] 1604 - 1605 -|**ASCII S**|**ASCII 10^^0^^**|**ASCII 10^^1^^**|**ASCII 10^^2^^**|**ASCII 10^^3^^**|**ASCII 10^^4^^** 1606 -|**ASCII code**|((( 1607 -{{id name="OLE_LINK36"/}}Units of 1608 - 1609 -ASCII code 1610 -)))|((( 1611 -Tens of 1612 - 1613 -ASCII code 1614 -)))|((( 1615 -Hundreds of 1616 - 1617 -ASCII code 1618 -)))|((( 1619 -Thousands of 1620 - 1621 -ASCII code 1622 -)))|((( 1623 -Ten thousands 1624 - 1625 -of ASCII code 1626 -))) 1627 - 1628 -For example, When -25,108 is specified in (s) 1629 - 1630 -[[image:07-5 Basic instructions_html_10fb2792e37dbf23.png]] 1631 - 1632 -β’ The ASCII data specified in (s) to (s)+2 is within the range of -32,768 to +32,767. 1633 - 1634 -β’ In βSignβ, set 20H when the converted data is positive, and set 2DH when it is negative. (When other than 20H or 2DH is set, it will be treated as positive data. (DABIN(P)) 1635 - 1636 -β’ The range of the ASCII code set in each digit is 30H to 39H. 1637 - 1638 -β’ When the ASCII code set in each bit is 20H or 00H, it will be treated as 30H. 1639 - 1640 -**Error code** 1641 - 1642 -|**Error code**|**Content** 1643 -|4084H|((( 1644 -When the Sign data exceeds the range of 30H to 39H, 20H, 00H, 2DH; 1645 - 1646 -When the ASCII code of each bit specified in (s) to (s)+2 exceeds the range of 30H to 39H, 20H, 00H; 1647 - 1648 -When the ASCII data specified in (s) to (s)+2 is other than -32,768 to +32,767. 1649 -))) 1650 -|4085H|The read address of (s) exceeds the device range. 1651 -|4086H|The write address of (d) exceeds the device range. 1652 - 1653 - 1654 -((( 1655 -When X000 is ON, the Signs set in D20 to D22 and the ASCII code data of 5-digit decimal numbers are converted into BIN values, and then stored in the program of D0. 1656 - 1657 -**Example** 1658 -))) 1659 - 1660 -[[image:07-5 Basic instructions_html_bec2bea131b58c03.png]] 1661 - 1662 -{{id name="_Toc3351"/}}{{id name="_Toc26383"/}}{{id name="_Toc26233"/}}**DDABIN/Decimal ASCII β BIN32-bit data conversion** 1663 - 1664 -[[image:07-5 Basic instructions_html_11b3991e89e21efc.gif]] **DDABIN(P)** 1665 - 1666 -The decimal ASCII data stored after the device number specified in (s) is converted into BIN 32-bit data and stored in the device number specified in (d). 1667 - 1668 --[DDABIN (s) (d) ] 1669 - 1670 -**Content, range and data type** 1671 - 1672 -|**Parameter**|**Content**|**Range**|**Data type**|**Data type (label)** 1673 -|(s)|The start number of the device that stores data (ASCII code) to be converted into a BIN value|-|String|ANYSTRING_SINGLE 1674 -|(d)|The device number for storing conversion result|-|Signed BIN 32 bit|ANY32_S 1675 - 1676 -**Device used** 1677 - 1678 -|(% rowspan="2" %)**Instruction**|(% rowspan="2" %)**Parameter**|(% colspan="24" %)**Devices**|**Offset modification**|((( 1679 -**Pulse** 1680 - 1681 -**extension** 1682 -))) 1683 -|**X**|**Y**|**M**|**S**|**SM**|**T(bit)**|**C(bit)**|**LC(bit)**|**HSC(bit)**|**D.b**|**KnX**|**KnY**|**KnM**|**KnS**|**T**|**C**|**D**|**R**|**SD**|**LC**|**HSC**|**K**|**H**|**E**|**[D]**|**XXP** 1684 -|(% rowspan="2" %)DDABIN|Parameter 1| | | | | | | | | | | | | | | | |β|β|β| | | | | |β|β 1685 -|Parameter 2| | | | | | | | | | | |β|β|β|β|β|β|β|β|β|β| | | |β|β 1686 - 1687 -**Features** 1688 - 1689 -The decimal ASCII data stored after the device number specified in (s) is converted into BIN 32-bit data and stored in the device specified in (d). 1690 - 1691 -[[image:07-5 Basic instructions_html_c444110b273f33b7.gif]] 1692 - 1693 -|**ASCII S**|**ASCII code**|**ASCII S**|**ASCII code** 1694 -|ASCII 10^^0^^|Units of ASCII code|ASCII 10^^5^^|{{id name="OLE_LINK38"/}}Hundred thousands of ASCII code 1695 -|ASCII 10^^1^^|Tens of ASCII code|ASCII 10^^6^^|Millions of ASCII code 1696 -|ASCII 10^^2^^|Hundreds of ASCII code|ASCII 10^^7^^|Ten millions of ASCII code 1697 -|ASCII 10^^3^^|{{id name="OLE_LINK37"/}}Thousands of ASCII code|ASCII 10^^8^^|Hundred millions of ASCII code 1698 -|ASCII 10^^4^^|Tens thousands of ASCII code|ASCII 10^^9^^|billions of ASCII code 1699 - 1700 -When -1234543210 is specified in (s) (When signed is specified) 1701 - 1702 -[[image:07-5 Basic instructions_html_1b4c7e1c663a4399.png]] 1703 - 1704 -β’ The ASCII data specified in (s) to (s)+5 is within the range of -2,147,483,648 to +2,147,483,647. In addition, the data stored in the high byte of (s)+5 will be ignored. 1705 - 1706 -β’ In the Sign data, set 20H when the converted data is positive, and set 2DH when it is negative. (When other than 20H or 2DH is set, it will be treated as positive data. (DABIN(P)) 1707 - 1708 -β’ The range of ASCII code set in each digit is 30H to 39H. 1709 - 1710 -β’ When the ASCII code set in each bit is 20H or 00H, it will be treated as 30H. 1711 - 1712 -**Error code** 1713 - 1714 -|**Error code**|**Content** 1715 -|4084H|((( 1716 -When the Sign data exceeds the range of 30H to 39H, 20H, 00H and 2DH; 1717 - 1718 -{{id name="OLE_LINK39"/}}When the ASCII code of each bit specified in (s) to (s)+5 exceeds the range of 30H to 39H, 20H and 00H; 1719 - 1720 -When the ASCII data specified in (s) to (s)+5 exceeds the range of -2,147,483,648 to +2,147,483,647 1721 -))) 1722 -|4085H|The read address of (s) exceeds the device range. 1723 -|4086H|The write address of (d) exceeds the device range. 1724 - 1725 -**Example** 1726 - 1727 -[[image:07-5 Basic instructions_html_feea438c943ea9dd.png]] 1728 - 1729 -When X000 is ON, the Signs set in to D20 to D25 and the ASCII code data of 10-digit decimal numbers are converted into BIN values and then saved to the program in D0 to D1. 1730 - 1731 -{{id name="_Toc26556"/}}{{id name="_Toc12799"/}}{{id name="_Toc23863"/}}**LIMIT/ BIN 16-bit data high and low limit control** 1732 - 1733 -[[image:07-5 Basic instructions_html_11b3991e89e21efc.gif]] **LIMIT(P)** 1734 - 1735 -The input value (BIN 16-bit value) specified in (s3) controls the output value stored in the device specified in (d) according to the upper and lower limit value ranges specified in (s1) and (s2). 1736 - 1737 --[LIMIT (s1) (s2) (s3) (d)] 1738 - 1739 -**Content, range and data type** 1740 - 1741 -|**Parameter**|**Content**|**Range**|**Data type**|**Data type (label)** 1742 -|s1|Low limit value (minimum output limit value)|-32,768 to 32,767|BIN16 bit|ANY16_S 1743 -|s2|High limit value (maximum output limit value)|-32,768 to 32,767|BIN16 bit|ANY16_S 1744 -|s3|Input value controlled by high and low limit control|-32,768 to 32,767|BIN16 bit|ANY16_S 1745 -|d|The start number of device that stores the output value controlled by high and low limit control|-|BIN16 bit|ANY16_S 1746 - 1747 -**Device used** 1748 - 1749 -|(% rowspan="2" %)**Instruction**|(% rowspan="2" %)**Parameter**|(% colspan="24" %)**Devices**|**Offset modification**|((( 1750 -**Pulse** 1751 - 1752 -**extension** 1753 -))) 1754 -|**X**|**Y**|**M**|**S**|**SM**|**T(bit)**|**C(bit)**|**LC(bit)**|**HSC(bit)**|**D.b**|**KnX**|**KnY**|**KnM**|**KnS**|**T**|**C**|**D**|**R**|**SD**|**LC**|**HSC**|**K**|**H**|**E**|**[D]**|**XXP** 1755 -|(% rowspan="4" %)LIMIT|Parameter 1| | | | | | | | | | |β|β|β|β|β|β|β|β|β| | |β|β| |β|β 1756 -|Parameter 2| | | | | | | | | | |β|β|β|β|β|β|β|β|β| | |β|β| |β|β 1757 -|Parameter 3| | | | | | | | | | |β|β|β|β|β|β|β|β|β| | | | | |β|β 1758 -|Parameter 4| | | | | | | | | | | |β|β|β|β|β|β|β|β| | | | | |β|β 1759 - 1760 -**Features** 1761 - 1762 -The input value (BIN 16-bit value) specified in (s3) controls the output value stored in the device specified in (d) according to the high and low limit value ranges specified in (s1) and (s2). The output value is controlled as follows. 1763 - 1764 -|**Condition**|**The value stored in the output value** 1765 -|Low limit value (s1)>input value (s3)|Low limit value (s1) 1766 -|High limit value (s1) <input value (s3)|High limit value (s2) 1767 -|Low limit value (s1) β€ input value (s3) β€ high limit value (s2)|Input value (s3) 1768 - 1769 - 1770 -((( 1771 -β’Only in the case of controlling high limit value, set the minimum value of data range in the low limit value specified in (s1). 1772 - 1773 -β’ Only in the case of controlling low limit value, set the maximum value of data range in the high limit value specified in (s2). 1774 - 1775 -[[image:07-5 Basic instructions_html_50eb5229b027aa14.png]] 1776 -))) 1777 - 1778 -**Error code** 1779 - 1780 -|**Error code**|**Content** 1781 -|4085H|The read address exceeds the device range 1782 -|4086H|The write address exceeds the device range 1783 -|4084H|High limit <low limit 1784 - 1785 -**Example** 1786 - 1787 -[[image:07-5 Basic instructions_html_d67a2e740d4fc738.png]] 1788 - 1789 -When X000 is ON 1790 - 1791 -β’ When D0 <500, D1 is 500. 1792 - 1793 -β’ When 500 β€ D0 β€ 5,000, D1 is the value of D0. 1794 - 1795 -β’ When 5,000 <D0, D1 is 5,000. 1796 - 1797 -{{id name="_Toc32553"/}}{{id name="_Toc9981"/}}{{id name="_Toc9158"/}}**DLIMIT/BIN 32-bit data high and low limit control** 1798 - 1799 -[[image:07-5 Basic instructions_html_11b3991e89e21efc.gif]] **DLIMIT(P)** 1800 - 1801 -The input value (BIN 32-bit value) specified in (s3) controls the output value stored in the device specified in (d) according to the range of high and low limit values specified in (s1) and (s2). 1802 - 1803 --[DLIMIT (s1) (s2) (s3) (d)] 1804 - 1805 -**Content, range and data type** 1806 - 1807 -|**Parameter**|**Content**|**Range**|**Data type**|**Data type (label)** 1808 -|s1|Low limit value (minimum output limit value)|-2,147,483,648 to 2,147,483,647|BIN32 bit|ANY32_S 1809 -|s2|High limit value (maximum output limit value)|-2,147,483,648 to 2,147,483,647|BIN32 bit|ANY32_S 1810 -|s3|Input value controlled by high and low limit control|-2,147,483,648 to 2,147,483,647|BIN32 bit|ANY32_S 1811 -|d|The start number of the device that stores the output value controlled by high and low limit control|-|BIN32 bit|ANY32_S 1812 - 1813 -**Device used** 1814 - 1815 -|(% rowspan="2" %)**Instruction**|(% rowspan="2" %)**Parameter**|(% colspan="24" %)**Devices**|**Offset modification**|((( 1816 -**Pulse** 1817 - 1818 -**extension** 1819 -))) 1820 -|**X**|**Y**|**M**|**S**|**SM**|**T(bit)**|**C(bit)**|**LC(bit)**|**HSC(bit)**|**D.b**|**KnX**|**KnY**|**KnM**|**KnS**|**T**|**C**|**D**|**R**|**SD**|**LC**|**HSC**|**K**|**H**|**E**|**[D]**|**XXP** 1821 -|(% rowspan="4" %)DLIMIT|Parameter 1| | | | | | | | | | |β|β|β|β|β|β|β|β|β|β|β|β|β| |β|β 1822 -|Parameter 2| | | | | | | | | | |β|β|β|β|β|β|β|β|β|β|β|β|β| |β|β 1823 -|Parameter 3| | | | | | | | | | |β|β|β|β|β|β|β|β|β|β|β| | | |β|β 1824 -|Parameter 4| | | | | | | | | | | |β|β|β|β|β|β|β|β|β|β| | | |β|β 1825 - 1826 -**Features** 1827 - 1828 -The input value (BIN 32-bit value) specified in (s3) controls the output value stored in the device specified in (d) according to the range of high and low limit values specified in (s1) and (s2). The output value is controlled as follows. 1829 - 1830 -|**Condition**|**The value stored in the output value** 1831 -|Low limit value ((s1), (s1)+1)> input value ((s3), (s3)+1)|Low limit value ((s1), (s1)+1) 1832 -|High limit value ((s2), (s2)+1) <input value ((s3), (s3)+1)|High limit value ((s2), (s2)+1) 1833 -|Low limit value ((s1), (s1)+1) β€ input value ((s3), (s3)+1) β€ high limit value ((s2), (s2)+1)|Input value ((s3), (s3)+1) 1834 - 1835 -{{id name="OLE_LINK43"/}}{{id name="OLE_LINK40"/}}β’Only in the case of controlling high limit value, set the minimum value of data range in the low limit value specified in (s1). 1836 - 1837 -β’ Only in the case of controlling low limit value, set the maximum value of data range in the high limit value specified in (s2). 1838 - 1839 -**Error code** 1840 - 1841 -|**Error code**|**Content** 1842 -|4085H|The read address exceeds the device range 1843 -|4086H|The write address exceeds the device range 1844 -|4084H|High limit <low limit 1845 - 1846 -**Example** 1847 - 1848 -[[image:07-5 Basic instructions_html_217355b90f4b4e16.png]] 1849 - 1850 -Operation: 1851 - 1852 -β’ When (D1, D0) <10,000, (D11, D10) is 10,000. 1853 - 1854 -β’ When 10,000 β€ (D1, D0) β€ 1,000,000, (D11, D10) is the value of (D1, D0). 1855 - 1856 -β’ When 1,000,000 <(D1, D0), (D11, D10) is 1,000,000. 1857 - 1858 -{{id name="_Toc12534"/}}{{id name="_Toc28213"/}}{{id name="_Toc24591"/}}**SCL/BIN 16-bit unit scale (coordinate data of each point)** 1859 - 1860 -[[image:07-5 Basic instructions_html_11b3991e89e21efc.gif]] **SCL(P)** 1861 - 1862 -The scaling conversion data (16-bit data unit) specified in (s2) is scaled from the input value specified in (s1), and the calculation result is stored in the device specified in (d). 1863 - 1864 --[SCL (s1) (s2) (d)] 1865 - 1866 -**Content, range and data type** 1867 - 1868 -|**Parameter**|**Content**|**Range**|**Data type**|**Data type (label)** 1869 -|(s1)|The input value for scaling or the start number of device storing the input value|-32,768 to 32,767|Signed BIN 16 bit|ANY16_S 1870 -|(s2)|The start number of the device storing conversion data for scaling|-|Signed BIN 16 bit|ANY16_S 1871 -|(d)|The start number of the device that stores the output value controlled by scaling|-|Signed BIN 16 bit|ANY16_S 1872 - 1873 -**Device used** 1874 - 1875 -|(% rowspan="2" %)**Instruction**|(% rowspan="2" %)**Parameter**|(% colspan="24" %)**Devices**|**Offset modification**|((( 1876 -**Pulse** 1877 - 1878 -**extension** 1879 -))) 1880 -|**X**|**Y**|**M**|**S**|**SM**|**T(bit)**|**C(bit)**|**LC(bit)**|**HSC(bit)**|**D.b**|**KnX**|**KnY**|**KnM**|**KnS**|**T**|**C**|**D**|**R**|**SD**|**LC**|**HSC**|**K**|**H**|**E**|**[D]**|**XXP** 1881 -|(% rowspan="3" %)SCL|Parameter 1| | | | | | | | | | |β|β|β|β|β|β|β|β|β| | |β|β| |β|β 1882 -|Parameter 2| | | | | | | | | | | | | | | | |β|β|β| | | | | |β|β 1883 -|Parameter 3| | | | | | | | | | | |β|β|β|β|β|β|β|β| | | | | |β|β 1884 - 1885 -**Features** 1886 - 1887 -For the scale conversion data (16-bit data unit) specified in (s2), scale by the input value specified in (s1), and store the operation result in the device specified in (d). Scale conversion is performed based on the scale conversion data stored after the device specified in (s2). 1888 - 1889 -|(% colspan="2" %)**Setting items (n represents the number of coordinate points specified in (s2))**|**Device allocation** 1890 -|(% colspan="2" %)Coordinate points|(s2) 1891 -|(% rowspan="2" %)Point 1|X coordinate|(s2)+1 1892 -|Y coordinate|(s2)+2 1893 -|(% rowspan="2" %)Point 2|X coordinate|(s2)+3 1894 -|Y coordinate|(s2)+4 1895 -|(% colspan="3" %)........ 1896 -|(% rowspan="2" %)Point n|X coordinate|(s2)+2n-1 1897 -|Y coordinate|(s2)+2n 1898 - 1899 -[[image:07-5 Basic instructions_html_80185ccddb878234.png]] 1900 - 1901 -β’ If the operation result is not an integer value, round the first digit below the decimal point. 1902 - 1903 -β’ The X coordinate data of the conversion data for scaling should be set in ascending order. 1904 - 1905 -β’ (s1) should be set within the range of conversion data for scaling (device value of (s2)). 1906 - 1907 -β’ If the same X coordinate is specified for multiple points, the Y coordinate value of the second point will be output. 1908 - 1909 -β’ Set the number of coordinate points of the conversion data for scaling within the range of 1 to 32,767. 1910 - 1911 -β’ Setting example of conversion table for scaling. 1912 - 1913 -In the case of scaling conversion characteristics as shown in the figure below, set it as the following data sheet. 1914 - 1915 -[[image:07-5 Basic instructions_html_74fd22d845ad450e.png]] 1916 - 1917 -|(% colspan="2" rowspan="2" %)**Set items**|(% colspan="3" %)**Sett device and content**|(% rowspan="2" %)**Remarks** 1918 -|(% colspan="2" %)**When R0 is specified in (s2)**|**Set content** 1919 -|(% colspan="2" %)Coordinate points|(s2)|R0|K10| 1920 -|(% rowspan="2" %)Point 1|X coordinate|(s2)+1|R1|K5| 1921 -|Y coordinate|(s2)+2|R2|K20| 1922 -|(% rowspan="2" %)Point 2|X coordinate|(s2)+3|R3|K30| 1923 -|Y coordinate|(s2)+4|R4|K50| 1924 -|(% rowspan="2" %)Point 3|X coordinate|(s2)+5|R5|K100| 1925 -|Y coordinate|(s2)+6|R6|K200| 1926 -|(% rowspan="2" %)Point 4|X coordinate|(s2)+7|R7|K25|(% rowspan="6" %)((( 1927 -If the coordinates are specified by 3 points, the intermediate value could be the output value. 1928 - 1929 -In this example, the output value (median value) is specified by the Y coordinate of point 5. 1930 - 1931 -When the X coordinate is the same at 3 points or more, the value of the 2nd point is also output. 1932 -))) 1933 -|Y coordinate|(s2)+8|R8|K200 1934 -|(% rowspan="2" %)Point 5|X coordinate|(s2)+9|R9|K70 1935 -|Y coordinate|(s2)+10|R10|K200 1936 -|(% rowspan="2" %)Point 6|X coordinate|(s2)+11|R11|K250 1937 -|Y coordinate|(s2)+12|R12|K250 1938 -|(% rowspan="2" %)Point 7|X coordinate|(s2)+13|R13|K250| 1939 -|Y coordinate|(s2)+14|R14|K90| 1940 -|(% rowspan="2" %)Point 8|X coordinate|(s2)+15|R15|K350|(% rowspan="4" %)((( 1941 -If the coordinates are specified by two points, the output value is the value of the Y coordinate of the next point. 1942 - 1943 -In this example, the output value is specified by the Y coordinate of point 9. 1944 -))) 1945 -|Y coordinate|(s2)+16|R16|K90 1946 -|(% rowspan="2" %)Point 9|X coordinate|(s2)+17|R17|K350 1947 -|Y coordinate|(s2)+18|R18|K30 1948 -|(% rowspan="2" %)Point 10|X coordinate|(s2)+19|R19|K400| 1949 -|Y coordinate|(s2)+20|R20|K7| 1950 - 1951 -**Error code** 1952 - 1953 -|**Error code**|**Content** 1954 -|4085H|When the specified device range for reading exceeds the range of the corresponding device. 1955 -|4086H|When the specified device range for writing exceeds the range of the corresponding device. 1956 -|4084H|((( 1957 -When the Xn data of data table is not sorted in ascending order. However, the instruction will be executed until the position where the error occurs; 1958 - 1959 -When the input value specified in (s1) exceeds the range of the set scale conversion data; 1960 - 1961 -When the number of start coordinate points of device (s2) is less than 0. 1962 -))) 1963 - 1964 -**Example** 1965 - 1966 -[[image:07-5 Basic instructions_html_5519d7b41f15b6d6.png]] 1967 - 1968 -[[image:07-5 Basic instructions_html_ace075fb7675de8e.gif]] When -100 β€ D0(X) < 0, D100(Y)= 1969 - 1970 -[[image:07-5 Basic instructions_html_9acd6306c6d91847.gif]] when D0(X)=0, D100(Y)=0; 1971 - 1972 -when 0< D0(X) β€ 100, D100(Y)= 1973 - 1974 -[[image:07-5 Basic instructions_html_e35e13160c08a133.png]] 1975 - 1976 - 1977 - 1978 -{{id name="_Toc4862"/}}{{id name="_Toc11340"/}}{{id name="_Toc25383"/}}**DSCL/32-bit unit scale (coordinate data of each point)** 1979 - 1980 -[[image:07-5 Basic instructions_html_11b3991e89e21efc.gif]] **DSCL(P)** 1981 - 1982 -The conversion data (32-bit data unit) for scaling specified in (s2) is scaled by the input value specified in (s1), and the operation result is stored in the device specified in (d). 1983 - 1984 --[DSCL (s1) (s2) (d)] 1985 - 1986 -**Content, range and data type** 1987 - 1988 -|**Parameter**|**Content**|**Range**|**Data type**|**Data type (label)** 1989 -|(s1)|The input value for scaling or the start number of the device storing the input value|-2,147,483,648 to 2,147,483,647|Signed BIN 32 bit|ANY32_S 1990 -|(s2)|The start number of the device storing conversion data for scaling|-|Signed BIN 32 bit|ANY32_S 1991 -|(d)|The start number of the device that stores the output value controlled by scaling|-|Signed BIN 32 bit|ANY32_S 1992 - 1993 -**Device used** 1994 - 1995 -|(% rowspan="2" %)**Instruction**|(% rowspan="2" %)**Parameter**|(% colspan="24" %)**Device**|**Offset modification**|((( 1996 -**Pulse** 1997 - 1998 -**extension** 1999 -))) 2000 -|**X**|**Y**|**M**|**S**|**SM**|**T(bit)**|**C(bit)**|**LC(bit)**|**HSC(bit)**|**D.b**|**KnX**|**KnY**|**KnM**|**KnS**|**T**|**C**|**D**|**R**|**SD**|**LC**|**HSC**|**K**|**H**|**E**|**[D]**|**XXP** 2001 -|(% rowspan="3" %)DSCL|Parameter 1| | | | | | | | | | |β|β|β|β|β|β|β|β|β|β|β|β|β| |β|β 2002 -|Parameter 2| | | | | | | | | | | | | | | | |β|β|β| | | | | |β|β 2003 -|Parameter 3| | | | | | | | | | | |β|β|β|β|β|β|β|β|β|β| | | |β|β 2004 - 2005 -**Features** 2006 - 2007 -{{id name="OLE_LINK41"/}}The conversion data (32-bit data unit) for scaling specified in (s2) is scaled by the input value specified in (s1), and the operation result is stored in the device number specified in (d). The scale conversion is performed based on the scale conversion data stored after the device specified in (s2). 2008 - 2009 -|(% colspan="2" %)**Set items (n represents the number of coordinate points specified in (s2))**|**Device allocation** 2010 -|(% colspan="2" %)Coordinate points|(s2)+1, (s2) 2011 -|(% rowspan="2" %)Point 1|X coordinate|(s2)+3, (s2)+2 2012 -|Y coordinate|(s2)+5, (s2)+4 2013 -|(% rowspan="2" %)Point 2|X coordinate|(s2)+7, (s2)+6 2014 -|Y coordinate|(s2)+9, (s2)+8 2015 -|(% colspan="3" %)........ 2016 -|(% rowspan="2" %)Point n|X coordinate|(s2)+4n-1, (s2)+4n-2 2017 -|Y coordinate|(s2)+4n+1, (s2)+4n 2018 - 2019 -[[image:07-5 Basic instructions_html_6633ca18cee1218c.png]] 2020 - 2021 -β’ If the calculation result is not an integer value, round the first digit below the decimal point. 2022 - 2023 -β’ The X coordinate data of the conversion data for scaling should be set in ascending order. 2024 - 2025 -β’ For (s1), set within the range of the conversion data for scaling ((s2), (s2) + 1 device value). 2026 - 2027 -β’ If the same X coordinate is specified for multiple points, the Y coordinate value of the second point will be output. 2028 - 2029 -β’ Set the number of coordinate points of conversion data for scaling within the range of 1 to 2,147,483,647. 2030 - 2031 -β’ Setting example of conversion table for scaling. 2032 - 2033 -In the case of scaling conversion characteristics as shown in the figure below, set it as the following data sheet. 2034 - 2035 -[[image:07-5 Basic instructions_html_74fd22d845ad450e.png]] 2036 - 2037 -|(% colspan="2" rowspan="2" %)**Set items**|(% colspan="3" %)**Set device and content**|(% rowspan="2" %)**Remarks** 2038 -|(% colspan="2" %)**When R0 is specified in (s2)**|**Set content** 2039 -|(% colspan="2" %)Coordinate points|(s2)+1, (s2)|R1, R0|K10| 2040 -|(% rowspan="2" %)Point 1|X coordinate|(s2)+3, (s2)+2|R3, R2|K5| 2041 -|Y coordinate|(s2)+5, (s2)+4|R5, R4|K7| 2042 -|(% rowspan="2" %)Point 2|X coordinate|(s2)+7, (s2)+6|R7, R6|K20| 2043 -|Y coordinate|(s2)+9, (s2)+8|R9, R8|K30| 2044 -|(% rowspan="2" %)Point 3|X coordinate|(s2)+11, (s2)+10|R10, R11|K50| 2045 -|Y coordinate|(s2)+13, (s2)+12|R13, R12|K100| 2046 -|(% rowspan="2" %)Point 4|X coordinate|(s2)+15, (s2)+14|R15, R14|K200|(% rowspan="6" %)((( 2047 -if the coordinates are specified by 3 points, the intermediate value could be the output value. 2048 - 2049 -In this example, the output value (median value) is specified by the Y coordinate of point 5. 2050 - 2051 -When the X coordinate is the same at 3 points or more, the value of the 2nd point is also output. 2052 -))) 2053 -|Y coordinate|(s2)+17, (s2)+16|R17, R16|K25 2054 -|(% rowspan="2" %)Point 5|X coordinate|(s2)+19, (s2)+18|R19, R18|K200 2055 -|Y coordinate|(s2)+21, (s2)+20|R21, R20|K70 2056 -|(% rowspan="2" %)Point 6|X coordinate|(s2)+23, (s2)+22|R23, R22|K200 2057 -|Y coordinate|(s2)+25, (s2)+24|R25, R24|K250 2058 -|(% rowspan="2" %)Point 7|X coordinate|(s2)+27, (s2)+26|R27, R26|K250| 2059 -|Y coordinate|(s2)+29, (s2)+28|R29, R28|K90| 2060 -|(% rowspan="2" %)Point 8|X coordinate|(s2)+31, (s2)+30|R31, R30|K350|(% rowspan="4" %)((( 2061 -If the coordinates are specified by two points, the output value is the value of the Y coordinate of the next point. 2062 - 2063 -In this example, the output value is specified by the Y coordinate of point 9. 2064 -))) 2065 -|Y coordinate|(s2)+33, (s2)+32|R33, R32|K90 2066 -|(% rowspan="2" %)Point 9|X coordinate|(s2)+35, (s2)+34|R35, R34|K350 2067 -|Y coordinate|(s2)+37, (s2)+36|R37, R36|K30 2068 -|(% rowspan="2" %)Point 10|X coordinate|(s2)+39, (s2)+38|R39, R38|K400| 2069 -|Y coordinate|(s2)+41, (s2)+40|R41, R40|K7| 2070 - 2071 -**Error code** 2072 - 2073 -|**Error code**|**Content** 2074 -|4085H|When the specified device range for reading exceeds the range of the corresponding device. 2075 -|4086H|When the specified device range for writing exceeds the range of the corresponding device. 2076 -|4084H|((( 2077 -When the Xn data of data table is not sorted in ascending order. However, the instruction will be executed until the position where the error occurs; 2078 - 2079 -When the input value specified in (s1) exceeds the range of the set scale conversion data; 2080 - 2081 -When the number of start coordinate points of device (s2) is less than 0. 2082 -))) 2083 - 2084 -**Example** 2085 - 2086 -[[image:07-5 Basic instructions_html_ba95b2d50d8d1d3e.png]] 2087 - 2088 -[[image:07-5 Basic instructions_html_1de79c7d87d51f78.gif]] When -100 β€ D0(X) < 0, D100(Y)= 2089 - 2090 -[[image:07-5 Basic instructions_html_9acd6306c6d91847.gif]] When D0(X)=0, D100(Y)=0; 2091 - 2092 -When 0 < D0(X) β€ 100, D100(Y)= 2093 - 2094 -[[image:07-5 Basic instructions_html_a5b19d1af74a9620.png]] 2095 - 2096 -{{id name="_Toc3776"/}}{{id name="_Toc11170"/}}{{id name="_Toc2957"/}}**SCL2/BIN 16-bit unit scale (X/Y coordinate data)** 2097 - 2098 -[[image:07-5 Basic instructions_html_11b3991e89e21efc.gif]] **SCL2(P)** 2099 - 2100 -The conversion data (16-bit data unit) for scaling specified in (s2) is scaled by the input value specified in (s1), and the operation result is stored in the device specified in (d). 2101 - 2102 --[SCL2 (s1) (s2) (d)] 2103 - 2104 -**Content, range and data type** 2105 - 2106 -|**Parameter**|**Content**|**Range**|**Data type**|**Data type (label)** 2107 -|(s1)|The input value for scaling or the start number of the device storing the input value|-32,768 to 32,767|Signed BIN 16 bit|ANY16_S 2108 -|(s2)|The start number of the device storing conversion data for scaling|-|Signed BIN 16 bit|ANY16_S 2109 -|(d)|The start number of the device that stores the output value controlled by scaling|-|Signed BIN 16 bit|ANY16_S 2110 - 2111 -**Device used** 2112 - 2113 -|(% rowspan="2" %)**Instruction**|(% rowspan="2" %)**Parameter**|(% colspan="24" %)**Devices**|**Offset modification**|((( 2114 -**Pulse** 2115 - 2116 -**extension** 2117 -))) 2118 -|**X**|**Y**|**M**|**S**|**SM**|**T(bit)**|**C(bit)**|**LC(bit)**|**HSC(bit)**|**D.b**|**KnX**|**KnY**|**KnM**|**KnS**|**T**|**C**|**D**|**R**|**SD**|**LC**|**HSC**|**K**|**H**|**E**|**[D]**|**XXP** 2119 -|(% rowspan="3" %)SCL2|Parameter 1| | | | | | | | | | |β|β|β|β|β|β|β|β|β| | |β|β| |β|β 2120 -|Parameter 2| | | | | | | | | | | | | | | | |β|β|β| | | | | |β|β 2121 -|Parameter 3| | | | | | | | | | | |β|β|β|β|β|β|β|β| | | | | |β|β 2122 - 2123 -**Features** 2124 - 2125 -The conversion data (16-bit data unit) for scaling specified in (s2) is scaled by the input value specified in (s1), and the operation result is stored in the device number specified in (d). The scale conversion is performed based on the scale conversion data stored after the device specified in (s2). 2126 - 2127 -|(% colspan="2" %)**Set items (n represents the number of coordinate points specified in (s2))**|**Device allocation** 2128 -|(% colspan="2" %)Coordinate points|(s2) 2129 -|(% rowspan="4" %)X coordinate|Point 1|(s2)+1 2130 -|Point 2|(s2)+2 2131 -|.....|...... 2132 -|Point n|(s2)+n 2133 -|(% rowspan="4" %)Y coordinate|Point 1|(s2)+n+1 2134 -|Point 2|(s2)+n+2 2135 -|.....|..... 2136 -|Point n|(s2)+2n 2137 - 2138 -[[image:07-5 Basic instructions_html_80185ccddb878234.png]] 2139 - 2140 -β’ If the operation result is not an integer value, round the first digit below the decimal point. 2141 - 2142 -β’ The X coordinate data of the conversion data for scaling should be set in ascending order. 2143 - 2144 -β’ For (s1), set within the range of the conversion data for scaling ((s2), (s2) + 1 device value). 2145 - 2146 -β’ If the same X coordinate is specified for multiple points, the Y coordinate value of the second point will be output. 2147 - 2148 -β’ Set the number of coordinate points of conversion data for scaling within the range of 1 to 32,767. 2149 - 2150 -β’ Setting example of conversion table for scaling. 2151 - 2152 -In the case of scaling conversion characteristics as shown in the figure below, set it as the following data sheet. 2153 - 2154 -[[image:07-5 Basic instructions_html_74fd22d845ad450e.png]] 2155 - 2156 -|(% colspan="2" rowspan="2" %)**Set items**|(% colspan="3" %)**Set device and content**|(% rowspan="2" %)**Remarks** 2157 -|(% colspan="2" %)**When R0 is specified in (s2)**|**Set content** 2158 -|(% colspan="2" %)Coordinate points|(s2)|R0|K10| 2159 -|(% rowspan="10" %)X coordinate|Point 1|(s2)+1|R1|K5| 2160 -|Point 2|(s2)+2|R2|K20| 2161 -|Point 3|(s2)+3|R3|K50| 2162 -|Point 4|(s2)+4|R4|K200|(% rowspan="3" %)Refer to**Β β1** 2163 -|Point 5|(s2)+5|R5|K200 2164 -|Point 6|(s2)+6|R6|K200 2165 -|Point 7|(s2)+7|R7|K250| 2166 -|Point 8|(s2)+8|R8|K350|(% rowspan="2" %)Refer to**Β β2** 2167 -|Point 9|(s2)+9|R9|K350 2168 -|Point 10|(s2)+10|R10|K400| 2169 -|(% rowspan="10" %)Y coordinate|Point 1|(s2)+11|R11|K7| 2170 -|Point 2|(s2)+12|R12|K30| 2171 -|Point 3|(s2)+13|R13|K100| 2172 -|Point 4|(s2)+14|R14|K25|(% rowspan="3" %)Refer to**β1** 2173 -|Point 5|(s2)+15|R15|K70 2174 -|Point 6|(s2)+16|R16|K250 2175 -|Point 7|(s2)+17|R17|K90| 2176 -|Point 8|(s2)+18|R18|K90|(% rowspan="2" %)Refer to**Β β2** 2177 -|Point 9|(s2)+19|R19|K30 2178 -|Point 10|(s2)+20|R20|K7| 2179 - 2180 -β**1** Like points 4, 5, and 6, if the coordinates are specified by 3 points, the intermediate value could be the output value. 2181 - 2182 -In this example, the output value (median value) is specified by the Y coordinate of point 5. 2183 - 2184 -When the X coordinate is the same at 3 or more points, the value of the second point is also output. 2185 - 2186 -β**2** Like points 8 and 9, if the coordinates are specified by 2 points, the output value is the value of the Y coordinate of next point. 2187 - 2188 -In this example, the output value is specified by the Y coordinate of point 9. 2189 - 2190 -**Error code** 2191 - 2192 -|**Error code**|**Content** 2193 -|4085H|When the specified device range for reading exceeds the range of the corresponding device. 2194 -|4086H|When the specified device range for writing exceeds the range of the corresponding device. 2195 -|4084H|((( 2196 -When the Xn data of data table is not sorted in ascending order. However, the instruction will be executed until the position where the error occurs; 2197 - 2198 -When the input value specified in (s1) exceeds the range of the set scale conversion data; 2199 - 2200 -When the number of start coordinate points of device (s2) is less than 0. 2201 -))) 2202 - 2203 -**Example** 2204 - 2205 -[[image:07-5 Basic instructions_html_ace075fb7675de8e.gif]] [[image:07-5 Basic instructions_html_de529c9a16a62ef0.png]] 2206 - 2207 -When -100 β€D0 (X) < 0, D100(Y)= 2208 - 2209 -[[image:07-5 Basic instructions_html_9acd6306c6d91847.gif]] when D0(X)=0, D100(Y)=0; 2210 - 2211 -when 0 < D0(X) β€ 100, D100(Y)= 2212 - 2213 -[[image:07-5 Basic instructions_html_a5b19d1af74a9620.png]] 2214 - 2215 -{{id name="_Toc5608"/}}{{id name="_Toc1756"/}}{{id name="_Toc21402"/}}**DSCL2/BIN 32-bit unit scale (X/Y coordinate data)** 2216 - 2217 -[[image:07-5 Basic instructions_html_11b3991e89e21efc.gif]] **DSCL2(P)** 2218 - 2219 -The conversion data (32-bit data unit) for scaling specified in (s2) is scaled by the input value specified in (s1), and the operation result is stored in the device specified in (d). 2220 - 2221 --[DSCL2 (s1) (s2) (d)] 2222 - 2223 -**Content, range and data type** 2224 - 2225 -|**Parameter**|**Content**|**Range**|**Data type**|**Data type (label)** 2226 -|(s1)|The input value for scaling or the start number of the device storing the input value|-2,147,483,648 to +2,147,483,647|Signed BIN 32 bit|ANY32_S 2227 -|(s2)|The start number of the device storing conversion data for scaling|-|Signed BIN 32 bit|ANY32_S 2228 -|(d)|The start number of the device that stores the output value controlled by scaling|-|Signed BIN 32 bit|ANY32_S 2229 - 2230 -**Device used** 2231 - 2232 -|(% rowspan="2" %)**Instruction**|(% rowspan="2" %)**Parameter**|(% colspan="24" %)**Devices**|**Offset modification**|((( 2233 -**Pulse** 2234 - 2235 -**extension** 2236 -))) 2237 -|**X**|**Y**|**M**|**S**|**SM**|**T(bit)**|**C(bit)**|**LC(bit)**|**HSC(bit)**|**D.b**|**KnX**|**KnY**|**KnM**|**KnS**|**T**|**C**|**D**|**R**|**SD**|**LC**|**HSC**|**K**|**H**|**E**|**[D]**|**XXP** 2238 -|(% rowspan="3" %)DSCL2|Parameter 1| | | | | | | | | | |β|β|β|β|β|β|β|β|β|β|β|β|β| |β|β 2239 -|Parameter 2| | | | | | | | | | | | | | | | |β|β|β| | | | | |β|β 2240 -|Parameter 3| | | | | | | | | | | |β|β|β|β|β|β|β|β|β|β| | | |β|β 2241 - 2242 -**Features** 2243 - 2244 -The conversion data (32-bit data unit) for scaling specified in (s2) is scaled by the input value specified in (s1), and the operation result is stored in the device number specified in (d). The scale conversion is performed based on the scale conversion data stored after the device specified in (s2). 2245 - 2246 -|(% colspan="2" %)**Set items (n represents the number of coordinate points specified in (s2))**|**Device allocation** 2247 -|(% colspan="2" %)Coordinate points|(s2)+1, (s2) 2248 -|(% rowspan="4" %)X coordinate|Point 1|(s2)+3, (s2)+2 2249 -|Point 2|(s2)+5, (s2)+4 2250 -|.....|...... 2251 -|Point n|(s2)+2n+1, (s2)+2n 2252 -|(% rowspan="4" %)Y coordinate|Point 1|(s2)+2n+3, (s2)+2n+2 2253 -|Point 2|(s2)+2n+5, (s2)+2n+4 2254 -|.....|..... 2255 -|Point n|(s2)+4n+1, (s2)+4n 2256 - 2257 -[[image:07-5 Basic instructions_html_6633ca18cee1218c.png]] 2258 - 2259 -β’ If the operation result is not an integer value, round the first digit below the decimal point. 2260 - 2261 -β’ The X coordinate data of the conversion data for scaling should be set in ascending order. 2262 - 2263 -β’ For (s1), set within the range of the conversion data for scaling ((s2), (s2) + 1 device value). 2264 - 2265 -β’ If the same X coordinate is specified for multiple points, the Y coordinate value of the second point will be output. 2266 - 2267 -β’ Set the number of coordinate points of conversion data for scaling within the range of 1 to 2,147,483,647. 2268 - 2269 -β’ Setting example of conversion table for scaling. 2270 - 2271 -In the case of scaling conversion characteristics as shown in the figure below, set it as the following data sheet. 2272 - 2273 -[[image:07-5 Basic instructions_html_74fd22d845ad450e.png]] 2274 - 2275 -|(% colspan="2" rowspan="2" %)**Set items**|(% colspan="3" %)**Set device and content**|(% rowspan="2" %)**Remarks** 2276 -|(% colspan="2" %)**When R0 is specified in (s2)**|**Set content** 2277 -|(% colspan="2" %)Coordinate points|(s2)+1, (s2)|R1, R0|K10| 2278 -|(% rowspan="10" %)X|Point 1|(s2)+3, (s2)+2|R3, R2|K5| 2279 -|Point 2|(s2)+5, (s2)+4|R5, R4|K20| 2280 -|Point 3|(s2)+7, (s2)+6|R7, R6|K50| 2281 -|Point 4|(s2)+9, (s2)+8|R9, R8|K200|(% rowspan="3" %)Refer to**Β β1** 2282 -|Point 5|(s2)+11, (s2)+10|R10, R11|K200 2283 -|Point 6|(s2)+13, (s2)+12|R13, R12|K200 2284 -|Point 7|(s2)+15, (s2)+14|R15, R14|K250| 2285 -|Point 8|(s2)+17, (s2)+16|R17, R16|K350|(% rowspan="2" %)Refer to**Β β2** 2286 -|Point 9|(s2)+19, (s2)+18|R19, R18|K350 2287 -|Point 10|(s2)+21, (s2)+20|R21, R20|K400| 2288 -|(% rowspan="10" %)Y coordinate|Point 1|(s2)+23, (s2)+22|R23, R22|K7| 2289 -|Point 2|(s2)+25, (s2)+24|R25, R24|K30| 2290 -|Point 3|(s2)+27, (s2)+26|R27, R26|K100| 2291 -|Point 4|(s2)+29, (s2)+28|R29, R28|K25|(% rowspan="3" %)Refer to**Β β1** 2292 -|Point 5|(s2)+31, (s2)+30|R31, R30|K70 2293 -|Point 6|(s2)+33, (s2)+32|R33, R32|K250 2294 -|Point 7|(s2)+35, (s2)+34|R35, R34|K90| 2295 -|Point 8|(s2)+37, (s2)+36|R37, R36|K90|(% rowspan="2" %)Refer to**Β β2** 2296 -|Point 9|(s2)+39, (s2)+38|R39, R38|K30 2297 -|Point 10|(s2)+41, (s2)+40|R41, R40|K7| 2298 - 2299 -β**1** Like points 4, 5, and 6, if the coordinates are specified by 3 points, the intermediate value could be the output value. 2300 - 2301 -In this example, the output value (median value) is specified by the Y coordinate of point 5. 2302 - 2303 -When the X coordinate is the same at 3 or more points, the value of the second point is also output. 2304 - 2305 -β**2** Like points 8 and 9, if the coordinates are specified by 2 points, the output value is the value of the Y coordinate of the next point. 2306 - 2307 -In this example, the output value is specified by the Y coordinate of point 9. 2308 - 2309 -**Error code** 2310 - 2311 -|**Error code**|**Content** 2312 -|4085H|When the specified device range for reading exceeds the range of the corresponding device. 2313 -|4086H|When the specified device range for writing exceeds the range of the corresponding device. 2314 -|4084H|((( 2315 -When the Xn data of data table is not sorted in ascending order. However, the instruction will be executed until the position where the error occurs; 2316 - 2317 -When the input value specified in (s1) exceeds the range of the set scale conversion data; 2318 - 2319 -When the number of start coordinate points of device (s2) is less than 0. 2320 -))) 2321 - 2322 -**Example** 2323 - 2324 -[[image:07-5 Basic instructions_html_91dbc16faa9d2ec3.png]] 2325 - 2326 -When -100 β€D0(X) < 0, D100(Y)=[[image:/xwiki/bin/download/PLC%20Editor2/1%20User%20manual/2.1%20LX5V%20user%20manual/07-5%20Basic%20instruction/WebHome/07-5%20Basic%20instructions_html_2c96d630f666e72c.gif?rev=1.1||alt="07-5 Basic instructions_html_2c96d630f666e72c.gif"]],,[[image:07-5 Basic instructions_html_2c96d630f666e72c.gif]] ,,; 2327 - 2328 -when D0(X)=0, D100(Y)=0; 2329 - 2330 -when 0< D0(X) β€ 100, D100(Y)=[[image:/xwiki/bin/download/PLC%20Editor2/1%20User%20manual/2.1%20LX5V%20user%20manual/07-5%20Basic%20instruction/WebHome/07-5%20Basic%20instructions_html_47ebf5cc7733fccc.gif?rev=1.1||alt="07-5 Basic instructions_html_47ebf5cc7733fccc.gif"]],,[[image:07-5 Basic instructions_html_47ebf5cc7733fccc.gif]] ,,. 2331 - 2332 -[[image:07-5 Basic instructions_html_a5b19d1af74a9620.png]] 2333 - 2334 -{{id name="_Toc32057"/}}{{id name="_Toc9941"/}}{{id name="_Toc6492"/}}**ZONE/BIN 16-bit data zone control** 2335 - 2336 -[[image:07-5 Basic instructions_html_11b3991e89e21efc.gif]] **ZONE(P)** 2337 - 2338 -After adding the offset value specified in (s1) or (s2) to the input value specified in (s3), it is stored in the device number specified in (d). 2339 - 2340 --[ZONE (s1) (s2) (s3) (d)] 2341 - 2342 -**Content, range and data type** 2343 - 2344 -|**Parameter**|**Content**|**Range**|**Data type**|**Data type (label)** 2345 -|s1|The negative offset value for addition in the input value|-32,768 to 32,767|BIN16 bit|ANY16_S 2346 -|s2|The positive offset value for addition in the input value|-32,768 to 32,767|BIN16 bit|ANY16_S 2347 -|s3|Input value for zone control`|-32,768 to 32,767|BIN16 bit|ANY16_S 2348 -|d|The start number of the device storing the output value controlled by zone control|-|BIN16 bit|ANY16_S 2349 - 2350 -**Device used** 2351 - 2352 -|(% rowspan="2" %)**Instruction**|(% rowspan="2" %)**Parameter**|(% colspan="24" %)**Devices**|**Offset modification**|((( 2353 -**Pulse** 2354 - 2355 -**extension** 2356 -))) 2357 -|**X**|**Y**|**M**|**S**|**SM**|**T(bit)**|**C(bit)**|**LC(bit)**|**HSC(bit)**|**D.b**|**KnX**|**KnY**|**KnM**|**KnS**|**T**|**C**|**D**|**R**|**SD**|**LC**|**HSC**|**K**|**H**|**E**|**[D]**|**XXP** 2358 -|(% rowspan="4" %)ZONE|Parameter 1| | | | | | | | | | |β|β|β|β|β|β|β|β|β| | |β|β| |β|β 2359 -|Parameter 2| | | | | | | | | | |β|β|β|β|β|β|β|β|β| | |β|β| |β|β 2360 -|Parameter 3| | | | | | | | | | |β|β|β|β|β|β|β|β|β| | | | | |β|β 2361 -|Parameter 4| | | | | | | | | | | |β|β|β|β|β|β|β|β| | | | | |β|β 2362 - 2363 -**Features** 2364 - 2365 -After adding the offset value specified in (s1) or (s2) to the input value (BIN 16-bit value) specified in (s3), it is stored in the device number specified in (d). The offset value is controlled as follows. 2366 - 2367 -|**Condition**|**The value stored in the output value** 2368 -|When input value (s3)<0|Input value (s3) + negative offset value (s1) 2369 -|When input value (s3)=0|0 2370 -|When input value (s3)>0|Input value (s3) + positive offset value (s2) 2371 - 2372 - 2373 -((( 2374 -β’ When the output value stored in (d) is a signed BIN 16-bit value, and the operation result exceeds the range of -32,768 to 32,767, the situation is shown in the following example. 2375 - 2376 -For example, when (s1) is -100 and (s3) is -32,768, 2377 - 2378 -the output value = -32768+(-100)=8000H-FF9CH=7F9CH=32668. 2379 - 2380 -[[image:07-5 Basic instructions_html_a2adbf9ccf8f839.png]] 2381 - 2382 - 2383 - 2384 -))) 2385 - 2386 -**Error code** 2387 - 2388 -|**Error code**|**Content** 2389 -|4085H|When the specified device range for reading exceeds the range of the corresponding device 2390 -|4086H|When the specified device range for writing exceeds the range of the corresponding device 2391 - 2392 -**Example** 2393 - 2394 -[[image:07-5 Basic instructions_html_5da523c7765bf5be.png]] 2395 - 2396 -When X000 is ON 2397 - 2398 -β’ When D0<0, the value of (D0)+(-1,000) is stored in D1. 2399 - 2400 -β’ When D0=0, 0 is stored in D1. 2401 - 2402 -β’ When 0<D0, the value of (D0)+(1,000) is stored in D1. 2403 - 2404 -{{id name="_Toc28351"/}}{{id name="_Toc11023"/}}{{id name="_Toc30269"/}}**DZONE/BIN 32-bit data zone control** 2405 - 2406 -[[image:07-5 Basic instructions_html_11b3991e89e21efc.gif]] DZONE(P) 2407 - 2408 -After adding the offset value specified in (s1) or (s2) to the input value specified in (s3), it is stored in the device number specified in (d). 2409 - 2410 --[DZONE (s1) (s2) (s3) (d)] 2411 - 2412 -**Content, range and data type** 2413 - 2414 -|**Parameter**|**Content**|**Range**|**Data type**|**Data type (label)** 2415 -|(s1)|The negative offset value for addition in the input value|-2147483648 to 2147483647|BIN32 bit|ANY32_S 2416 -|(s2)|The positive offset value for addition in the input value|-2147483648 to 2147483647|BIN32 bit|ANY32_S 2417 -|(s3)|Input value for zone control|-2147483648 to 2147483647|BIN32 bit|ANY32_S 2418 -|(d)|The start number of the device storing the output value controlled by zone control|-|BIN32 bit|ANY32_S 2419 - 2420 -**Device used** 2421 - 2422 -|(% rowspan="2" %)**Instruction**|(% rowspan="2" %)**Parameter**|(% colspan="24" %)**Devices**|**Offset modification**|((( 2423 -**Pulse** 2424 - 2425 -**extension** 2426 -))) 2427 -|**X**|**Y**|**M**|**S**|**SM**|**T(bit)**|**C(bit)**|**LC(bit)**|**HSC(bit)**|**D.b**|**KnX**|**KnY**|**KnM**|**KnS**|**T**|**C**|**D**|**R**|**SD**|**LC**|**HSC**|**K**|**H**|**E**|**[D]**|**XXP** 2428 -|(% rowspan="4" %)DZONE|Parameter 1| | | | | | | | | | |β|β|β|β|β|β|β|β|β|β|β|β|β| |β|β 2429 -|Parameter 2| | | | | | | | | | |β|β|β|β|β|β|β|β|β|β|β|β|β| |β|β 2430 -|Parameter 3| | | | | | | | | | |β|β|β|β|β|β|β|β|β|β|β| | | |β|β 2431 -|Parameter 4| | | | | | | | | | | |β|β|β|β|β|β|β|β|β|β| | | |β|β 2432 - 2433 -**Features** 2434 - 2435 -After adding the offset value specified in (s1) or (s2) to the input value (BIN 32-bit value) specified in (s3), it is stored in the device number specified in (d). The offset value is controlled as follows. 2436 - 2437 -|**Condition**|**The value stored in the output value** 2438 -|When input value ((s3), (s3)+1)<0|Input value ((s3), (s3)+1) + negative offset value (s1), (s1)+1 2439 -|When input value ((s3), (s3)+1)=0|0 2440 -|When input value ((s3), (s3)+1)>0|Input value ((s3), (s3)+1) + positive offset value (s2), (s2)+1 2441 - 2442 - 2443 -((( 2444 -β’ When the output value stored in (d) and (d)+1 is a signed BIN 32-bit value, and the operation result exceeds the range of -2,147,483,648 to 2,147,483,647, the situation is shown in the following example. 2445 - 2446 -For example, (s1), (s1)+1 is -1,000, (s3), (s3)+1 is -2,147,483,648, then the output value=-2,147,483,648+(-1000)=80000000H+FFFFFC18H=2,147,482,648. 2447 - 2448 -[[image:07-5 Basic instructions_html_2f3a96a2565c75c7.png]] 2449 -))) 2450 - 2451 -**Error code** 2452 - 2453 -|**Error code**|**Content** 2454 -|4085H|When the specified device range for reading exceeds the range of the corresponding device 2455 -|4086H|When the specified device range for writing exceeds the range of the corresponding device 2456 - 2457 -**Example** 2458 - 2459 -[[image:07-5 Basic instructions_html_b831b14748df07ab.png]] 2460 - 2461 -β’ When (D1, D0)<0, the value of (D1, D0)+(-10,000) is stored in (D11, D10). 2462 - 2463 -β’ When (D1, D0)=0, 0 is stored in (D11, D10). 2464 - 2465 -β’ When 0<(D1, D0), the value of (D1, D0)+10,000 is stored in (D11, D10). 903 +(% style="text-align:center" %) 904 +[[image:07-5 Basic instructions_html_f512f36261705953.png||height="48" width="218"]]