Skip to Content

Changes for page 12 Clock operation

Last modified by Mora Zhou on 2023/11/21 17:27
From version 29.1
edited by Mora Zhou
on 2023/11/21 17:27
Change comment: There is no comment for this version
To version 16.1
edited by Bob
on 2022/11/23 11:37
Change comment: There is no comment for this version

Summary

Details

Page properties
Author
... ... @@ -1,1 +1,1 @@
1 -XWiki.Mora
1 +XWiki.Bob
Content
... ... @@ -68,12 +68,11 @@
68 68  |SM151|Carry|It is ON when the result of the TADD(P) instruction exceeds the maximum clock data value of 23:59:59
69 69  |SM153|Zero|It is ON when the result of the TADD(P) instruction is 0:00:00
70 70  
71 -(% class="box infomessage" %)
72 -(((
73 -✎**Note:** The devices specified in (s1), (s2), (d) occupy 3 points respectively. Be careful not to overlap with the device used for machine control.
71 +✎**Note:**
74 74  
73 +The devices specified in (s1), (s2), (d) occupy 3 points respectively. Be careful not to overlap with the device used for machine control.
74 +
75 75  When using the clock data time (hour, minute, second) of the built-in real-time clock of the CPU module, use the TRD(P) instruction to read the value of the special register and assign the word device to each operand.
76 -)))
77 77  
78 78  **Error code**
79 79  
... ... @@ -934,8 +934,7 @@
934 934  
935 935  **Timing Chart**
936 936  
937 -(% style="text-align:center" %)
938 -[[image:图片3.png]]
936 +[[image:企业微信截图_16691725418532.png]]
939 939  
940 940  **Features**
941 941  
... ... @@ -964,8 +964,7 @@
964 964  
965 965  **Example**
966 966  
967 -(% style="text-align:center" %)
968 -[[image:图片4.png]]
965 +[[image:企业微信截图_16691729278938.png]]
969 969  
970 970  T1 is used for storing time, setting the expected time as K10 and the time base as K10000.
971 971  
... ... @@ -975,7 +975,7 @@
975 975  
976 976  == **TONR/BIN 16-bit Hold-type turn-on delay timer** ==
977 977  
978 -**TONR(P)**
975 +[[image:file:///C:\Users\ADMINI~~1\AppData\Local\Temp\ksohtml8784\wps1.png]]**TONR(P)**
979 979  
980 980  Specify the T timer device in (s1), the expected time in (s2), and the time base (resolution) in (s3). And store the time values of the accumulated multiple timing intervals into the device specified in (s1).
981 981  
... ... @@ -1000,8 +1000,7 @@
1000 1000  
1001 1001  **Timing Chart**
1002 1002  
1003 -(% style="text-align:center" %)
1004 -[[image:图片2.png]]
1000 +[[image:企业微信截图_16691733488965.png]]
1005 1005  
1006 1006  **Features**
1007 1007  
... ... @@ -1032,8 +1032,7 @@
1032 1032  
1033 1033  **Example**
1034 1034  
1035 -(% style="text-align:center" %)
1036 -[[image:图片1.png]]
1031 +[[image:企业微信截图_16691733566206.png]]
1037 1037  
1038 1038  T1 is used for storing time, setting the expected time as K10 and the time base as K10000.
1039 1039  
... ... @@ -1043,7 +1043,7 @@
1043 1043  
1044 1044  == **TOF/BIN 16-bit Turn-off delay timer** ==
1045 1045  
1046 -**TOF(P)**
1041 +[[image:file:///C:\Users\ADMINI~~1\AppData\Local\Temp\ksohtml8784\wps6.png]]**TOF(P)**
1047 1047  
1048 1048  Specify the T timer device in (s1), the expected time in (s2), and the time base (resolution) in (s3). And store the time values of the accumulated multiple timing intervals into the device specified in (s1).
1049 1049  
... ... @@ -1068,8 +1068,7 @@
1068 1068  
1069 1069  **Timing Chart**
1070 1070  
1071 -(% style="text-align:center" %)
1072 -[[image:图片5.png]]
1066 +[[image:企业微信截图_16691735325382.png]]
1073 1073  
1074 1074  **Features**
1075 1075  
... ... @@ -1100,8 +1100,7 @@
1100 1100  
1101 1101  **Example**
1102 1102  
1103 -(% style="text-align:center" %)
1104 -[[image:图片6.png]]
1097 +[[image:企业微信截图_16691735281572.png]]
1105 1105  
1106 1106  T1 is used for storing time, setting the expected time as K10 and the time base as K10000.
1107 1107  
... ... @@ -1109,74 +1109,4 @@
1109 1109  
1110 1110  If the (M8) contact ON again during (T1) timing, the (T1) value clears to 0 and the timing ends
1111 1111  
1112 -== **TP/BIN 16-bit Start pulse timer** ==
1113 -
1114 -**TP(P)**
1115 -
1116 -Specify the T timer device in (s1), the expected time in (s2), and the time base (resolution) in (s3). And output TRUE in the set time of "(s2)*(s3)" product.
1117 -
1118 -PLC Editor2 version that supports this instruction: 2.3.1 and above.
1119 -
1120 --[TP (s1) (s2) (s3)]
1121 -
1122 -**Content, scope, data type**
1123 -
1124 -|**parameter**|**Content**|**range**|**type of data**|**Data type (label)**
1125 -|(s1)|T device|0~~511|Signed BIN 16 bit|ANY16_S
1126 -|(s2)|Expected time|0~~32767|Signed BIN 16 bit|ANY16_S
1127 -|(s3)|Time base(resolution)|1/10/100/1000/10000|Signed BIN 16 bit|ANY16_S
1128 -
1129 -**Device used**
1130 -
1131 -|(% rowspan="2" %)**instruction**|(% rowspan="2" %)**parameter**|(% colspan="24" %)**Devices**|**Offset modification**|**Pulse extension**
1132 -|**X**|**Y**|**M**|**S**|**SM**|**T(bit)**|**C(bit)**|**LC(bit)**|**HSC(bit)**|**D.b**|**KnX**|**KnY**|**KnM**|**KnS**|**T**|**C**|**D**|**R**|**SD**|**LC**|**HSC**|**K**|**H**|**E**|**[D]**|**XXP**
1133 -|(% rowspan="3" %)TON|Parameter 1| | | | | | | | | | | | | | |●| | | | | | | | | | |
1134 -|Parameter 2| | | | | | | | | | |●|●|●|●| |●|●|●|●| | |●|●| | |
1135 -|Parameter 3| | | | | | | | | | | | | | | | | | | | | |●|●| | |
1136 -
1137 -**Timing Chart**
1138 -
1139 -(% style="text-align:center" %)
1140 -[[image:图片7.png]]
1141 -
1142 -**Features**
1143 -
1144 -Timer that outputs TRUE only for the set time after startup
1145 -
1146 -1) When the enable input is turned on, timer (s1) is started and timer (s1) bit is immediately turned on. Timer (s1) stops as time increases and reaches the expected time.
1147 -
1148 -2) After timer (s1) reaches the predetermined time (s2), timer (s1) bit is disconnected. At this time, timer (s1) stops increasing. If the enable input becomes FALSE, timer (s1) will reset. The expected time (s2) becomes 0.
1149 -
1150 -3) After starting, if the enable input becomes FALSE before the timer (s1) reaches the expected time (s2), the timer will be reset after reaching the expected time (s2).
1151 -
1152 -
1153 -|**S3 time base**|**Actual value**
1154 -|1|100us
1155 -|10|1ms
1156 -|100|10ms
1157 -|1000|100ms
1158 -|10000|1s
1159 -
1160 -**Precautions**
1161 -
1162 -• Avoid timer number conflict: the same timer number cannot be used for TON, TONR, TOF, TP, OUT_T timers at the same time. For example, TON T32 and TOF T32 cannot be used at the same time (it may cause data confusion and not achieve the effect of the corresponding instruction function).
1163 -
1164 -**Error code**
1165 -
1166 -|**Error code**|**Content**
1167 -|4084H|Input data in (s2) (s3) is outside the specified range.
1168 -|4085H|Device tpye in (s1) (s2) (s3) is outside the specified range.
1169 -|4086H|Device tpye in (s1) is outside the specified range.
1170 -
1171 -**Example**
1172 -
1173 -(% style="text-align:center" %)
1174 -[[image:图片8.png]]
1175 -
1176 -T1 is used for storing time, setting the expected time as K5 and the time base as K10000.
1177 -
1178 -When the enable input (M8) is on, the timer (T1) is started and the timer (T1) bit turns on immediately. Timer (T1) stops as time increases and reaches the expected time.
1179 -
1180 -After timer (T1) reaches a predetermined time of 5s, timer (T1) bit is disconnected. At this time, timer (T1) stops increasing. If the enable input (M8) becomes FALSE, timer (T1) will reset. The expected time becomes 0.
1181 -
1182 -After startup, if the enable input (M8) becomes FALSE before the timer (T1) reaches the estimated time of 5s, the timer will be reset after reaching the estimated time of 5s.
1105 +
企业微信截图_16691747709508.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Bob
Size
... ... @@ -1,1 +1,0 @@
1 -8.4 KB
Content
企业微信截图_1669174775341.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Bob
Size
... ... @@ -1,1 +1,0 @@
1 -4.2 KB
Content
企业微信截图_16692613377006.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Bob
Size
... ... @@ -1,1 +1,0 @@
1 -17.1 KB
Content
企业微信截图_16692614835389.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Bob
Size
... ... @@ -1,1 +1,0 @@
1 -4.8 KB
Content
企业微信截图_16692615431415.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Bob
Size
... ... @@ -1,1 +1,0 @@
1 -16.1 KB
Content
图片1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Bob
Size
... ... @@ -1,1 +1,0 @@
1 -4.4 KB
Content
图片2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Bob
Size
... ... @@ -1,1 +1,0 @@
1 -36.7 KB
Content
图片3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Bob
Size
... ... @@ -1,1 +1,0 @@
1 -29.3 KB
Content
图片4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Bob
Size
... ... @@ -1,1 +1,0 @@
1 -3.1 KB
Content
图片5.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Bob
Size
... ... @@ -1,1 +1,0 @@
1 -22.8 KB
Content
图片6.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Bob
Size
... ... @@ -1,1 +1,0 @@
1 -3.2 KB
Content
图片7.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Bob
Size
... ... @@ -1,1 +1,0 @@
1 -19.9 KB
Content
图片8.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Bob
Size
... ... @@ -1,1 +1,0 @@
1 -3.0 KB
Content