Skip to Content
Last modified by Mora Zhou on 2024/08/08 14:35
From version 25.2
edited by Stone Wu
on 2022/09/26 10:21
Change comment: There is no comment for this version
To version 25.4
edited by Stone Wu
on 2022/09/26 10:28
Change comment: (Autosaved)

Summary

Details

Page properties
Content
... ... @@ -1115,13 +1115,11 @@
1115 1115  **✎Note:**
1116 1116  
1117 1117  1. Please be careful not to overlap with other control devices.
1118 -1. About pulse output
1118 +1. About pulse output: This instruction is executed in interrupt mode. When the instruction power flow is OFF, the output stops. (s1) and (s2) can be changed when the PWM instruction is executed. If it is modified to an incorrect parameter, the sending of PWM pulse will be stopped.
1119 1119  
1120 -This instruction is executed in interrupt mode. When the instruction power flow is OFF, the output stops. (s1) and (s2) can be changed when the PWM instruction is executed. If it is modified to an incorrect parameter, the sending of PWM pulse will be stopped.
1121 -
1122 1122  **Related device**
1123 1123  
1124 -• Percentage mode flag
1122 +• Permil mode flag
1125 1125  
1126 1126  (% class="table-bordered" %)
1127 1127  |=(% scope="row" %)**Output shaft**|**Y0**|**Y1**|**Y2**|**Y3**|**Y4**|**Y5**|**Y6**|**Y7**