Skip to Content
Last modified by Mora Zhou on 2024/08/08 14:35
From version 33.1
edited by Devin Chen
on 2024/04/15 14:02
Change comment: There is no comment for this version
To version 32.1
edited by Devin Chen
on 2024/02/01 16:31
Change comment: There is no comment for this version

Summary

Details

Page properties
Content
... ... @@ -1199,9 +1199,9 @@
1199 1199  
1200 1200  SM345: Set the mode of switching line interpolation. When SM345=0, it is two-axis line interpolation mode. When SM345=1, it is three-axis line interpolation mode.
1201 1201  
1202 -If (d1) specifies Y0 and SM345=0, Y0 and Y1 are occupied. If SM345=1, Y0, Y1 and Y2 are occupied;
1202 +If d1 specifies Y0 and SM345=0, Y0 and Y1 are occupied. If SM345=1, Y0, Y1 and Y2 are occupied;
1203 1203  
1204 -If (d1) specifies Y2 and SM345=0, Y2 and Y3 are occupied. If SM345=1, the software reports an error.
1204 +If d1 specifies Y2 and SM345=0, Y2 and Y3 are occupied. If SM345=1, the software reports an error.
1205 1205  
1206 1206  * {{id name="OLE_LINK6"/}}Specify the bit device of output direction signal in d2 and occupy 3 consecutive addresses, which indicate the directions of the X, Y, and Z axes in turn.
1207 1207