Changes for page 06 Control Mode

Last modified by Mora Zhou on 2023/12/21 15:45

From version 8.1
edited by Mora Zhou
on 2023/11/21 13:49
Change comment: There is no comment for this version
To version 9.1
edited by Mora Zhou
on 2023/11/21 13:50
Change comment: There is no comment for this version

Summary

Details

Page properties
Content
... ... @@ -19,17 +19,13 @@
19 19  )))
20 20  |5|The servo drive and motor are grounded reliably.
21 21  |6|(((
22 -The jumper between terminals C and D has been removed when the
23 -
24 -external regenerative resistor is used.
22 +The jumper between terminals C and D has been removed when the external regenerative resistor is used.
25 25  )))
26 26  |7|The cable tension is within the permissible range.
27 27  |8|The wiring terminals have been insulated.
28 28  |(% colspan="2" %)Environment and mechanical conditions
29 29  |1|(((
30 -No foreign objects, such as wire end or metal powder, which may cause
31 -
32 -short circuit of the signal wire and power cables, exist inside and outside of the servo drive.
28 +No foreign objects, such as wire end or metal powder, which may cause short circuit of the signal wire and power cables, exist inside and outside of the servo drive.
33 33  )))
34 34  |2|The servo drive or external regenerative resistor is not placed on flammable objects.
35 35  |3|Installation and shaft and mechanical connection are reliable.