Changes for page 06 Control Mode

Last modified by Mora Zhou on 2023/12/21 15:45

From version 9.1
edited by Mora Zhou
on 2023/11/21 13:50
Change comment: There is no comment for this version
To version 8.1
edited by Mora Zhou
on 2023/11/21 13:49
Change comment: There is no comment for this version

Summary

Details

Page properties
Content
... ... @@ -19,13 +19,17 @@
19 19  )))
20 20  |5|The servo drive and motor are grounded reliably.
21 21  |6|(((
22 -The jumper between terminals C and D has been removed when the external regenerative resistor is used.
22 +The jumper between terminals C and D has been removed when the
23 +
24 +external regenerative resistor is used.
23 23  )))
24 24  |7|The cable tension is within the permissible range.
25 25  |8|The wiring terminals have been insulated.
26 26  |(% colspan="2" %)Environment and mechanical conditions
27 27  |1|(((
28 -No foreign objects, such as wire end or metal powder, which may cause short circuit of the signal wire and power cables, exist inside and outside of the servo drive.
30 +No foreign objects, such as wire end or metal powder, which may cause
31 +
32 +short circuit of the signal wire and power cables, exist inside and outside of the servo drive.
29 29  )))
30 30  |2|The servo drive or external regenerative resistor is not placed on flammable objects.
31 31  |3|Installation and shaft and mechanical connection are reliable.