Skip to Content

Changes for page 05 Panel

Last modified by Mora Zhou on 2024/07/15 15:05
From version 10.1
edited by Leo Wei
on 2022/06/11 14:24
Change comment: Upload new image "Wecon VD2 SA Series Servo Drives Manual (Full V1.1)_html_5faafc734d343eca.gif", version 1.1
To version 2.1
edited by Stone Wu
on 2022/06/11 12:48
Change comment: There is no comment for this version

Summary

Details

Page properties
Author
... ... @@ -1,1 +1,1 @@
1 -XWiki.admin
1 +XWiki.Stone
Content
... ... @@ -7,7 +7,7 @@
7 7  
8 8  Figure 5-1 The exterior of the type A servo drive panel
9 9  
10 -The panel of the VD2 series servo drive consists of a display (5-digit LED nixie tube) and keys, which can be used for the execution of various displays, parameter settings and other functions of the servo drive. Taking parameter setting as an example, the general functions of the keys are shown in __[[Table 5-1>>http://13.229.109.52:8080/wiki/servo/view/2. User Manual/06 VD2 SA Series Servo Drives Manual (Full V1.1)/05 Panel/#HPanelcomposition]]__.
10 +The panel of the VD2 series servo drive consists of a display (5-digit LED nixie tube) and keys, which can be used for the execution of various displays, parameter settings and other functions of the servo drive. Taking parameter setting as an example, the general functions of the keys are shown in __[[Table 5-1>>http://13.229.109.52:8080/wiki/servo/view/2.%20User%20Manual/06%20VD2%20SA%20Series%20Servo%20Drives%20Manual%20%28Full%20V1.1%29/05%20Panel/#HPanelcomposition]]__.
11 11  
12 12  (% class="table-bordered" style="margin-right:auto" %)
13 13  |(% style="text-align:center; vertical-align:middle" %)**Icon**|(% style="text-align:center; vertical-align:middle" %)**Name**|(% style="text-align:center; vertical-align:middle" %)**Function**
... ... @@ -51,7 +51,7 @@
51 51  
52 52  1. The power is turned on, and the panel display of the servo drive enters “Status Display Mode”.
53 53  1. After an operation failure occurs, the panel immediately switches to the bit failure display mode. At this time, all the nixie tubes flash synchronously. Press the "mode" key to switch to the parameter display mode.
54 -1. Press the "Mode" key to switch between different display modes, and the switching conditions are shown in __[[Figure 5-2>>Wecon VD2 SA Series Servo Drives Manual (Full V1.1)_html_5faafc734d343eca.gif]]__.
54 +1. Press the "Mode" key to switch between different display modes, and the switching conditions are shown in __[[Figure 5-2>>http://docs.we-con.com.cn/wiki/servo/download/2.%20User%20Manual/06%20VD2%20SA%20Series%20Servo%20Drives%20Manual%20%28Full%20V1.1%29/WebHome/Wecon%20VD2%20SA%20Series%20Servo%20Drives%20Manual%20%28Full%20V1.1%29_html_5faafc734d343eca.gif?rev=1.1]]__.
55 55  
56 56  == **Status display** ==
57 57  
... ... @@ -67,7 +67,7 @@
67 67  
68 68  == **Parameter display** ==
69 69  
70 -VD2 series servo drive are divided into 13 groups of function codes according to different parameter functions, which could quickly locate the position of function codes according to the function code groups. For the specific parameters refer to__[[ “9 Parameters".>>http://13.229.109.52:8080/wiki/servo/view/2. User Manual/06 VD2 SA Series Servo Drives Manual (Full V1.1)/09 Parameters/]]__
70 +VD2 series servo drive are divided into 13 groups of function codes according to different parameter functions, which could quickly locate the position of function codes according to the function code groups. For the specific parameters refer to__[[ “9 Parameters".>>http://13.229.109.52:8080/wiki/servo/view/2.%20User%20Manual/06%20VD2%20SA%20Series%20Servo%20Drives%20Manual%20%28Full%20V1.1%29/09%20Parameters/]]__
71 71  
72 72  **(1) Parameter group display**
73 73  
... ... @@ -81,7 +81,7 @@
81 81  
82 82  (% class="table-bordered" %)
83 83  |(% style="text-align:center; vertical-align:middle" %)**Display**|(% style="text-align:center; vertical-align:middle" %)**Name**|(% style="text-align:center; vertical-align:middle" %)**Content**
84 -|(% style="text-align:center; vertical-align:middle" %)[[image:image-20220611131659-1.jpge]]|(% style="text-align:center; vertical-align:middle" %)Function code P00.01|(% style="text-align:center; vertical-align:middle" %)(((
84 +|(% style="text-align:center; vertical-align:middle" %)[[image:http://docs.we-con.com.cn/wiki/servo/download/2.%20User%20Manual/06%20VD2%20SA%20Series%20Servo%20Drives%20Manual%20%28Full%20V1.1%29/WebHome/Wecon%20VD2%20SA%20Series%20Servo%20Drives%20Manual%20%28Full%20V1.1%29_html_5b50f563f126ce9c.gif?rev=1.1||alt="Wecon VD2 SA Series Servo Drives Manual (Full V1.1)_html_5b50f563f126ce9c.gif"]]|(% style="text-align:center; vertical-align:middle" %)Function code P00.01|(% style="text-align:center; vertical-align:middle" %)(((
85 85  00: Function code group number
86 86  
87 87  01: Number in the function code group
... ... @@ -97,15 +97,16 @@
97 97  
98 98  (% class="table-bordered" %)
99 99  |(% style="text-align:center; vertical-align:middle" %)**Display**|(% style="text-align:center; vertical-align:middle" %)**Name**|(% style="text-align:center; vertical-align:middle" %)**Content**
100 -|(% style="text-align:center; vertical-align:middle" %)[[image:image-20220611131704-2.jpeg]]|(% style="text-align:center; vertical-align:middle" %)Monitoring volume U0-02|(% style="text-align:center; vertical-align:middle" %)Servo motor speed
100 +|(% style="text-align:center; vertical-align:middle" %)[[image:http://docs.we-con.com.cn/wiki/servo/download/2.%20User%20Manual/06%20VD2%20SA%20Series%20Servo%20Drives%20Manual%20%28Full%20V1.1%29/WebHome/Wecon%20VD2%20SA%20Series%20Servo%20Drives%20Manual%20%28Full%20V1.1%29_html_4966cef79adc70d2.gif?rev=1.1||alt="Wecon VD2 SA Series Servo Drives Manual (Full V1.1)_html_4966cef79adc70d2.gif"]]|(% style="text-align:center; vertical-align:middle" %)Monitoring volume U0-02|(% style="text-align:center; vertical-align:middle" %)Servo motor speed
101 101  
102 102  2) Display Data more than five bits
103 103  
104 -Display in pages from low to high bits, and each 4 bits is a page. Display method: current page + current value.as shown in __[[Figure 5-3>>Wecon VD2 SA Series Servo Drives Manual (Full V1.1)_html_1b79bd139c3057b2.png]]__ and __[[Figure 5-4>>Wecon VD2 SA Series Servo Drives Manual (Full V1.1)_html_c63bc504c89e53a8.png]]__, switch current page by pressing the "shift" key.
104 +Display in pages from low to high bits, and each 4 bits is a page. Display method: current page + current value.as shown in __[[Figure 5-3>>http://docs.we-con.com.cn/wiki/servo/download/2.%20User%20Manual/06%20VD2%20SA%20Series%20Servo%20Drives%20Manual%20%28Full%20V1.1%29/WebHome/Wecon%20VD2%20SA%20Series%20Servo%20Drives%20Manual%20%28Full%20V1.1%29_html_1b79bd139c3057b2.png?rev=1.1]]__ and __[[Figure 5-4>>http://docs.we-con.com.cn/wiki/servo/download/2.%20User%20Manual/06%20VD2%20SA%20Series%20Servo%20Drives%20Manual%20%28Full%20V1.1%29/WebHome/Wecon%20VD2%20SA%20Series%20Servo%20Drives%20Manual%20%28Full%20V1.1%29_html_c63bc504c89e53a8.png?rev=1.1]]__, switch current page by pressing the "shift" key.
105 105  
106 106  For example: 2147483646 is displayed as follows:
107 107  
108 -[[image:image-20220611131846-1.png]]
108 +(% style="text-align:center" %)
109 +[[image:http://docs.we-con.com.cn/wiki/servo/download/2.%20User%20Manual/06%20VD2%20SA%20Series%20Servo%20Drives%20Manual%20%28Full%20V1.1%29/WebHome/Wecon%20VD2%20SA%20Series%20Servo%20Drives%20Manual%20%28Full%20V1.1%29_html_1b79bd139c3057b2.png?rev=1.1||alt="Wecon VD2 SA Series Servo Drives Manual (Full V1.1)_html_1b79bd139c3057b2.png"]]
109 109  
110 110  Figure 5-3 2147483646 display operation
111 111  
... ... @@ -112,7 +112,7 @@
112 112  For example: -2147483647 is displayed as follows:
113 113  
114 114  (% style="text-align:center" %)
115 -[[image:Wecon VD2 SA Series Servo Drives Manual (Full V1.1)_html_c63bc504c89e53a8.png]]
116 +[[image:http://docs.we-con.com.cn/wiki/servo/download/2.%20User%20Manual/06%20VD2%20SA%20Series%20Servo%20Drives%20Manual%20%28Full%20V1.1%29/WebHome/Wecon%20VD2%20SA%20Series%20Servo%20Drives%20Manual%20%28Full%20V1.1%29_html_c63bc504c89e53a8.png?rev=1.1||alt="Wecon VD2 SA Series Servo Drives Manual (Full V1.1)_html_c63bc504c89e53a8.png"]]
116 116  
117 117  Figure 5-4 -2147483647 display operation
118 118  
... ... @@ -122,23 +122,23 @@
122 122  
123 123  (% class="table-bordered" %)
124 124  |(% style="text-align:center; vertical-align:middle" %)**Display**|(% style="text-align:center; vertical-align:middle" %)**Name**|(% style="text-align:center; vertical-align:middle" %)**Content**
125 -|(% style="text-align:center; vertical-align:middle" %)[[image:image-20220611133729-1.gif]]|(% style="text-align:center; vertical-align:middle" %)Decimal point|(% style="text-align:center; vertical-align:middle" %)302.4
126 +|(% style="text-align:center; vertical-align:middle" %)[[image:http://docs.we-con.com.cn/wiki/servo/download/2.%20User%20Manual/06%20VD2%20SA%20Series%20Servo%20Drives%20Manual%20%28Full%20V1.1%29/WebHome/Wecon%20VD2%20SA%20Series%20Servo%20Drives%20Manual%20%28Full%20V1.1%29_html_c561302f0c177b93.gif?rev=1.1||alt="Wecon VD2 SA Series Servo Drives Manual (Full V1.1)_html_c561302f0c177b93.gif"]]|(% style="text-align:center; vertical-align:middle" %)Decimal point|(% style="text-align:center; vertical-align:middle" %)302.4
126 126  
127 127  **(4) Parameter setting display**
128 128  
129 129  (% class="table-bordered" %)
130 130  |(% style="text-align:center; vertical-align:middle" %)**Display**|(% style="text-align:center; vertical-align:middle" %)**Name**|(% style="text-align:center; vertical-align:middle" %)**Display occasion**|(% style="text-align:center; vertical-align:middle" %)**Meaning**
131 -|(% style="text-align:center; vertical-align:middle" %)[[image:Wecon VD2 SA Series Servo Drives Manual (Full V1.1)_html_71833477b416faaf.gif]]|(% style="text-align:center; vertical-align:middle" %)(((
132 +|(% style="text-align:center; vertical-align:middle" %)[[image:http://docs.we-con.com.cn/wiki/servo/download/2.%20User%20Manual/06%20VD2%20SA%20Series%20Servo%20Drives%20Manual%20%28Full%20V1.1%29/WebHome/Wecon%20VD2%20SA%20Series%20Servo%20Drives%20Manual%20%28Full%20V1.1%29_html_71833477b416faaf.gif?rev=1.1||alt="Wecon VD2 SA Series Servo Drives Manual (Full V1.1)_html_71833477b416faaf.gif"]]|(% style="text-align:center; vertical-align:middle" %)(((
132 132  Done
133 133  
134 134  Parameter setting completed
135 135  )))|(% style="text-align:center; vertical-align:middle" %)Parameter reset factory|(% style="text-align:center; vertical-align:middle" %)The servo drive is in the process of parameter factory reset
136 -|(% style="text-align:center; vertical-align:middle" %)[[image:Wecon VD2 SA Series Servo Drives Manual (Full V1.1)_html_66661c97974ab485.gif]]|(% style="text-align:center; vertical-align:middle" %)(((
137 +|(% style="text-align:center; vertical-align:middle" %)[[image:http://docs.we-con.com.cn/wiki/servo/download/2.%20User%20Manual/06%20VD2%20SA%20Series%20Servo%20Drives%20Manual%20%28Full%20V1.1%29/WebHome/Wecon%20VD2%20SA%20Series%20Servo%20Drives%20Manual%20%28Full%20V1.1%29_html_66661c97974ab485.gif?rev=1.1||alt="Wecon VD2 SA Series Servo Drives Manual (Full V1.1)_html_66661c97974ab485.gif"]]|(% style="text-align:center; vertical-align:middle" %)(((
137 137  P.Init
138 138  
139 139  Parameter reset factory
140 140  )))|(% style="text-align:center; vertical-align:middle" %)Parameter reset factory|(% style="text-align:center; vertical-align:middle" %)The servo drive is in the process of parameter factory reset
141 -|(% style="text-align:center; vertical-align:middle" %)[[image:Wecon VD2 SA Series Servo Drives Manual (Full V1.1)_html_fe94062b992abf5a.gif]]|(% style="text-align:center; vertical-align:middle" %)(((
142 +|(% style="text-align:center; vertical-align:middle" %)[[image:http://docs.we-con.com.cn/wiki/servo/download/2.%20User%20Manual/06%20VD2%20SA%20Series%20Servo%20Drives%20Manual%20%28Full%20V1.1%29/WebHome/Wecon%20VD2%20SA%20Series%20Servo%20Drives%20Manual%20%28Full%20V1.1%29_html_fe94062b992abf5a.gif?rev=1.1||alt="Wecon VD2 SA Series Servo Drives Manual (Full V1.1)_html_fe94062b992abf5a.gif"]]|(% style="text-align:center; vertical-align:middle" %)(((
142 142  Error
143 143  
144 144  Parameter error
... ... @@ -148,7 +148,7 @@
148 148  
149 149  == **Fault display** ==
150 150  
151 -The panel can display current or historical fault and warning codes. For analysis and troubleshooting of faults and warnings, please refer to__[[ "10 Faults" >>http://13.229.109.52:8080/wiki/servo/view/2. User Manual/06 VD2 SA Series Servo Drives Manual (Full V1.1)/10 Malfunctions/#HFaultandwarningcodetable]]__.
152 +The panel can display current or historical fault and warning codes. For analysis and troubleshooting of faults and warnings, please refer to__[[ "10 Faults" >>http://13.229.109.52:8080/wiki/servo/view/2.%20User%20Manual/06%20VD2%20SA%20Series%20Servo%20Drives%20Manual%20%28Full%20V1.1%29/10%20Malfunctions/#HFaultandwarningcodetable]]__.
152 152  
153 153  When a single fault or warning occurs, the panel immediately displays the current fault or warning code;
154 154  
... ... @@ -156,13 +156,13 @@
156 156  
157 157  (% class="table-bordered" %)
158 158  |(% style="text-align:center; vertical-align:middle" %)**Display**|(% style="text-align:center; vertical-align:middle" %)**Name**|(% style="text-align:center; vertical-align:middle" %)**Content**
159 -|(% style="text-align:center; vertical-align:middle" %)[[image:Wecon VD2 SA Series Servo Drives Manual (Full V1.1)_html_b9eb712b45c52172.gif]]|(% style="text-align:center; vertical-align:middle" %)Parameter modification that needs to be powered on again|(% style="text-align:center; vertical-align:middle" %)Modified the parameters that need to be re-powered to take effect
160 +|(% style="text-align:center; vertical-align:middle" %)[[image:http://docs.we-con.com.cn/wiki/servo/download/2.%20User%20Manual/06%20VD2%20SA%20Series%20Servo%20Drives%20Manual%20%28Full%20V1.1%29/WebHome/Wecon%20VD2%20SA%20Series%20Servo%20Drives%20Manual%20%28Full%20V1.1%29_html_b9eb712b45c52172.gif?rev=1.1||alt="Wecon VD2 SA Series Servo Drives Manual (Full V1.1)_html_b9eb712b45c52172.gif"]]|(% style="text-align:center; vertical-align:middle" %)Parameter modification that needs to be powered on again|(% style="text-align:center; vertical-align:middle" %)Modified the parameters that need to be re-powered to take effect
160 160  
161 161  Table 5-4 Warning display example
162 162  
163 163  (% class="table-bordered" %)
164 164  |(% style="text-align:center; vertical-align:middle; width:303px" %)**Display**|(% style="text-align:center; vertical-align:middle; width:558px" %)**Name**|(% style="text-align:center; vertical-align:middle; width:624px" %)**Content**
165 -|(% style="text-align:center; vertical-align:middle; width:303px" %)[[image:Wecon VD2 SA Series Servo Drives Manual (Full V1.1)_html_b851b96afa7ab426.gif]]|(% style="text-align:center; vertical-align:middle; width:558px" %)Motor overload protection|(% style="text-align:center; vertical-align:middle; width:624px" %)Motor overload protection
166 +|(% style="text-align:center; vertical-align:middle; width:303px" %)[[image:http://docs.we-con.com.cn/wiki/servo/download/2.%20User%20Manual/06%20VD2%20SA%20Series%20Servo%20Drives%20Manual%20%28Full%20V1.1%29/WebHome/Wecon%20VD2%20SA%20Series%20Servo%20Drives%20Manual%20%28Full%20V1.1%29_html_b851b96afa7ab426.gif?rev=1.1||alt="Wecon VD2 SA Series Servo Drives Manual (Full V1.1)_html_b851b96afa7ab426.gif"]]|(% style="text-align:center; vertical-align:middle; width:558px" %)Motor overload protection|(% style="text-align:center; vertical-align:middle; width:624px" %)Motor overload protection
166 166  
167 167  Table 5-5 Fault display example
168 168  
... ... @@ -177,13 +177,13 @@
177 177  **volume**
178 178  )))|(% style="text-align:center; vertical-align:middle" %)**Name**|(% style="text-align:center; vertical-align:middle" %)**Unit**|(% style="text-align:center; vertical-align:middle" %)**Meaning**
179 179  |(% style="text-align:center; vertical-align:middle" %)(((
180 -[[image:Wecon VD2 SA Series Servo Drives Manual (Full V1.1)_html_fed555ae469c643d.gif]]
181 +[[image:http://docs.we-con.com.cn/wiki/servo/download/2.%20User%20Manual/06%20VD2%20SA%20Series%20Servo%20Drives%20Manual%20%28Full%20V1.1%29/WebHome/Wecon%20VD2%20SA%20Series%20Servo%20Drives%20Manual%20%28Full%20V1.1%29_html_fed555ae469c643d.gif?rev=1.1||alt="Wecon VD2 SA Series Servo Drives Manual (Full V1.1)_html_fed555ae469c643d.gif"]]
181 181  
182 -[[image:Wecon VD2 SA Series Servo Drives Manual (Full V1.1)_html_acb651c29bc239bf.gif]]
183 +[[image:http://docs.we-con.com.cn/wiki/servo/download/2.%20User%20Manual/06%20VD2%20SA%20Series%20Servo%20Drives%20Manual%20%28Full%20V1.1%29/WebHome/Wecon%20VD2%20SA%20Series%20Servo%20Drives%20Manual%20%28Full%20V1.1%29_html_acb651c29bc239bf.gif?rev=1.1||alt="Wecon VD2 SA Series Servo Drives Manual (Full V1.1)_html_acb651c29bc239bf.gif"]]
183 183  )))|(% style="text-align:center; vertical-align:middle" %)U0-02|(% style="text-align:center; vertical-align:middle" %)Servo motor speed|(% style="text-align:center; vertical-align:middle" %)rpm|Indicates the actual operating speed of servo motor, expressed in decimal.
184 -|(% style="text-align:center; vertical-align:middle" %)[[image:Wecon VD2 SA Series Servo Drives Manual (Full V1.1)_html_cfc3d1a6717e72f0.gif]]|(% style="text-align:center; vertical-align:middle" %)U0-31|(% style="text-align:center; vertical-align:middle" %)Bus voltage|(% style="text-align:center; vertical-align:middle" %)V|Indicates the voltage value between P+ and - of the drive, the DC bus voltage
185 -|(% style="text-align:center; vertical-align:middle" %)[[image:Wecon VD2 SA Series Servo Drives Manual (Full V1.1)_html_80f9014fcbb17741.gif]]|(% style="text-align:center; vertical-align:middle" %)U0-17|(% style="text-align:center; vertical-align:middle" %)Input signal status|(% style="text-align:center; vertical-align:middle" %)-|Indicates the level status corresponding to the 8 DI terminals. The upper half of the LED light indicates high level, and the lower half light indicates low level. **(The VD2F model has only 4 DI ports)**
186 -|(% style="text-align:center; vertical-align:middle" %)[[image:Wecon VD2 SA Series Servo Drives Manual (Full V1.1)_html_d032ad3556119999.gif]]|(% style="text-align:center; vertical-align:middle" %)U0-19|(% style="text-align:center; vertical-align:middle" %)Output signal status|(% style="text-align:center; vertical-align:middle" %)-|Indicates the level status corresponding to the 4 DO terminals. The upper half of the LED light indicates high level, and the lower half light indicates low level.
185 +|(% style="text-align:center; vertical-align:middle" %)[[image:http://docs.we-con.com.cn/wiki/servo/download/2.%20User%20Manual/06%20VD2%20SA%20Series%20Servo%20Drives%20Manual%20%28Full%20V1.1%29/WebHome/Wecon%20VD2%20SA%20Series%20Servo%20Drives%20Manual%20%28Full%20V1.1%29_html_cfc3d1a6717e72f0.gif?rev=1.1||alt="Wecon VD2 SA Series Servo Drives Manual (Full V1.1)_html_cfc3d1a6717e72f0.gif"]]|(% style="text-align:center; vertical-align:middle" %)U0-31|(% style="text-align:center; vertical-align:middle" %)Bus voltage|(% style="text-align:center; vertical-align:middle" %)V|Indicates the voltage value between P+ and - of the drive, the DC bus voltage
186 +|(% style="text-align:center; vertical-align:middle" %)[[image:http://docs.we-con.com.cn/wiki/servo/download/2.%20User%20Manual/06%20VD2%20SA%20Series%20Servo%20Drives%20Manual%20%28Full%20V1.1%29/WebHome/Wecon%20VD2%20SA%20Series%20Servo%20Drives%20Manual%20%28Full%20V1.1%29_html_80f9014fcbb17741.gif?rev=1.1||alt="Wecon VD2 SA Series Servo Drives Manual (Full V1.1)_html_80f9014fcbb17741.gif"]]|(% style="text-align:center; vertical-align:middle" %)U0-17|(% style="text-align:center; vertical-align:middle" %)Input signal status|(% style="text-align:center; vertical-align:middle" %)-|Indicates the level status corresponding to the 8 DI terminals. The upper half of the LED light indicates high level, and the lower half light indicates low level. **(The VD2F model has only 4 DI ports)**
187 +|(% style="text-align:center; vertical-align:middle" %)[[image:http://docs.we-con.com.cn/wiki/servo/download/2.%20User%20Manual/06%20VD2%20SA%20Series%20Servo%20Drives%20Manual%20%28Full%20V1.1%29/WebHome/Wecon%20VD2%20SA%20Series%20Servo%20Drives%20Manual%20%28Full%20V1.1%29_html_d032ad3556119999.gif?rev=1.1||alt="Wecon VD2 SA Series Servo Drives Manual (Full V1.1)_html_d032ad3556119999.gif"]]|(% style="text-align:center; vertical-align:middle" %)U0-19|(% style="text-align:center; vertical-align:middle" %)Output signal status|(% style="text-align:center; vertical-align:middle" %)-|Indicates the level status corresponding to the 4 DO terminals. The upper half of the LED light indicates high level, and the lower half light indicates low level.
187 187  
188 188  Table 5-6 Monitoring volume display example
189 189  
... ... @@ -191,7 +191,7 @@
191 191  
192 192  == **Parameter setting** ==
193 193  
194 -Use the servo drive panel to set the parameters. For details about the parameters, please refer to __[[" 9 Parameters">>http://13.229.109.52:8080/wiki/servo/view/2. User Manual/06 VD2 SA Series Servo Drives Manual (Full V1.1)/09 Parameters/]]__. Take P00.01 as an example to set the parameters to change the control mode of the servo drive from position control mode to speed control mode. The setting steps are shown in __[[Figure 5-5>>Wecon VD2 SA Series Servo Drives Manual (Full V1.1)_html_6c7a398bfc7ce1.gif]]__.
195 +Use the servo drive panel to set the parameters. For details about the parameters, please refer to __[[" 9 Parameters">>http://13.229.109.52:8080/wiki/servo/view/2.%20User%20Manual/06%20VD2%20SA%20Series%20Servo%20Drives%20Manual%20%28Full%20V1.1%29/09%20Parameters/]]__. Take P00.01 as an example to set the parameters to change the control mode of the servo drive from position control mode to speed control mode. The setting steps are shown in __[[Figure 5-5>>http://docs.we-con.com.cn/wiki/servo/download/2.%20User%20Manual/06%20VD2%20SA%20Series%20Servo%20Drives%20Manual%20%28Full%20V1.1%29/WebHome/Wecon%20VD2%20SA%20Series%20Servo%20Drives%20Manual%20%28Full%20V1.1%29_html_6c7a398bfc7ce1.gif?rev=1.1]]__.
195 195  
196 196  (% style="text-align:center" %)
197 197  [[image:image-20220608162758-1.png]]
... ... @@ -200,7 +200,7 @@
200 200  
201 201  == **Jog operation** ==
202 202  
203 -In order to test run the servo motor and the servo drive, you can use the jog running function. The operation steps are shown in __[[Figure 5-6>>Wecon VD2 SA Series Servo Drives Manual (Full V1.1)_html_46d0c0afb3f9adbe.gif]]__.
204 +In order to test run the servo motor and the servo drive, you can use the jog running function. The operation steps are shown in __[[Figure 5-6>>http://docs.we-con.com.cn/wiki/servo/download/2.%20User%20Manual/06%20VD2%20SA%20Series%20Servo%20Drives%20Manual%20%28Full%20V1.1%29/WebHome/Wecon%20VD2%20SA%20Series%20Servo%20Drives%20Manual%20%28Full%20V1.1%29_html_46d0c0afb3f9adbe.gif?rev=1.1]]__.
204 204  
205 205  **Illustrate:**
206 206  
... ... @@ -210,16 +210,16 @@
210 210  1. Long press the "Up" key and "Down" key to realize the forward and reverse rotation of the motor.
211 211  1. Press the "Mode" key to exit the JOG mode.
212 212  
213 -Reason for displaying Error: Please refer to __[[“10 Faults" >>http://13.229.109.52:8080/wiki/servo/view/2. User Manual/06 VD2 SA Series Servo Drives Manual (Full V1.1)/10 Malfunctions/#HFaultandwarningcodetable]]__according to the corresponding fault codes.
214 +Reason for displaying Error: Please refer to __[[“10 Faults" >>http://13.229.109.52:8080/wiki/servo/view/2.%20User%20Manual/06%20VD2%20SA%20Series%20Servo%20Drives%20Manual%20%28Full%20V1.1%29/10%20Malfunctions/#HFaultandwarningcodetable]]__according to the corresponding fault codes.
214 214  
215 215  (% style="text-align:center" %)
216 -[[image:Wecon VD2 SA Series Servo Drives Manual (Full V1.1)_html_46d0c0afb3f9adbe.gif]]
217 +[[image:http://docs.we-con.com.cn/wiki/servo/download/2.%20User%20Manual/06%20VD2%20SA%20Series%20Servo%20Drives%20Manual%20%28Full%20V1.1%29/WebHome/Wecon%20VD2%20SA%20Series%20Servo%20Drives%20Manual%20%28Full%20V1.1%29_html_46d0c0afb3f9adbe.gif?rev=1.1||alt="Wecon VD2 SA Series Servo Drives Manual (Full V1.1)_html_46d0c0afb3f9adbe.gif"]]
217 217  
218 218  Figure 5-6 Jog operation setting steps
219 219  
220 220  == **Factory reset** ==
221 221  
222 -The factory settings can be restored through the servo drive panel. The specific operation steps are shown in __[[Figure 5-7>>Wecon VD2 SA Series Servo Drives Manual (Full V1.1)_html_46722eeaa91a76f9.gif]]__.
223 +The factory settings can be restored through the servo drive panel. The specific operation steps are shown in __[[Figure 5-7>>http://docs.we-con.com.cn/wiki/servo/download/2.%20User%20Manual/06%20VD2%20SA%20Series%20Servo%20Drives%20Manual%20%28Full%20V1.1%29/WebHome/Wecon%20VD2%20SA%20Series%20Servo%20Drives%20Manual%20%28Full%20V1.1%29_html_46722eeaa91a76f9.gif?rev=1.1]]__.
223 223  
224 224  **Illustrate:**
225 225  
... ... @@ -232,6 +232,6 @@
232 232  Error reason: When the parameter value of P10.02 exceeds the set range (0 to 1), “Error” will be displayed.
233 233  
234 234  (% style="text-align:center" %)
235 -[[image:Wecon VD2 SA Series Servo Drives Manual (Full V1.1)_html_46722eeaa91a76f9.gif]]
236 +[[image:http://docs.we-con.com.cn/wiki/servo/download/2.%20User%20Manual/06%20VD2%20SA%20Series%20Servo%20Drives%20Manual%20%28Full%20V1.1%29/WebHome/Wecon%20VD2%20SA%20Series%20Servo%20Drives%20Manual%20%28Full%20V1.1%29_html_46722eeaa91a76f9.gif?rev=1.1||alt="Wecon VD2 SA Series Servo Drives Manual (Full V1.1)_html_46722eeaa91a76f9.gif"]]
236 236  
237 237  Figure 5-7 Steps for restoring factory settings
Wecon VD2 SA Series Servo Drives Manual (Full V1.1)_html_1b79bd139c3057b2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.admin
Size
... ... @@ -1,1 +1,0 @@
1 -11.4 KB
Content
Wecon VD2 SA Series Servo Drives Manual (Full V1.1)_html_5faafc734d343eca.gif
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.admin
Size
... ... @@ -1,1 +1,0 @@
1 -5.2 KB
Content